[media] uvc: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] em28xx: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] bttv: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx88: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx18: replace cropping ioctls by selection ioctls

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx18: fix VIDIOC_ENUMINPUT: wrong std value

The std field of v4l2_input is always V4L2_STD_ALL. For tuner inputs
this should be cx->tuner_std.

This fixes a v4l2-compliance failure.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx18: add support for control events

v4l2-compliance failed due to missing control event support in cx18.
Add this to the driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: radio-si4713: improve usage of gpiod API

Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.
Simplify accordingly.

Moreover use the _optional variant which has tighter error checking, but
is simpler to use which allows further simplification.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vivid: use V4L2_DV_FL_IS_CE_VIDEO instead of V4L2_DV_BT_STD_CEA861

Don't rely on V4L2_DV_BT_STD_CEA861 since that include the
640x480p format, which is an IT format, not CE.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] adv: use V4L2_DV_FL_IS_CE_VIDEO instead of V4L2_DV_BT_STD_CEA861

Don't rely on V4L2_DV_BT_STD_CEA861 since that include the
640x480p format, which is an IT format, not CE.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] DocBook media: document the new V4L2_DV_FL_IS_CE_VIDEO flag

Document this new flag.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2-dv-timings: log new V4L2_DV_FL_IS_CE_VIDEO flag

Add support for the new flag to v4l2_print_dv_timings().

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] videodev2.h/v4l2-dv-timings.h: add V4L2_DV_FL_IS_CE_VIDEO flag

In the past the V4L2_DV_BT_STD_CEA861 standard bit was used to
determine whether the format is a CE (Consumer Electronics) format
or not. However, the 640x480p59.94 format is part of the CEA-861
standard, but it is *not* a CE video format.

Add a new flag to make this explicit. This information is needed
in order to determine the default R'G'B' encoding for the format:
for CE video this is limited range (16-235) instead of full range
(0-255).

The header with all the timings has been updated with this new
flag.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media/Documentation: New flag EXECUTE_ON_WRITE

Document new flag V4L2_CTRL_FLAG_EXECUTE_ON_WRITE, and the new behavior
of CH_VALUE event on VOLATILE controls.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media/v4l2-ctrls: Always execute EXECUTE_ON_WRITE ctrls

Any control with V4L2_CTRL_FLAG_EXECUTE_ON_WRITE set should return
changed == true in cluster_changed.

This forces the value to be passed to the driver even if it has not
changed.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media/v4l2-ctrls: Add execute flags to write_only controls

Any control that sets FLAG_WRITE_ONLY should OR it with
FLAG_EXECUTE_ON_WRITE.

So we can keep the current meaning of WRITE_ONLY.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: New flag V4L2_CTRL_FLAG_EXECUTE_ON_WRITE

Create a new flag that represent controls which its value needs to be
passed to the driver even if it has not changed.

They typically represent actions, like triggering a flash or clearing an
error flag. So writing to such a control means some action is executed.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media/v4l2-ctrls: volatiles should not generate CH_VALUE

Volatile controls should not generate CH_VALUE events.

Set has_changed to false to prevent this happening.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vivid: add support to set CVT, GTF timings

In addition to v4l2_find_dv_timings_cap(), where timings are searched
against the list of preset timings, the incoming timing from v4l2-ctl
is checked against CVT and GTF standards. If it confirms to be CVT or
GTF, it is treated as valid timing and vivid format is updated with
new timings.

Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vivid: add CVT,GTF standards to vivid dv timings caps

Currently vivid supports V4L2_DV_BT_STD_DMT and V4L2_DV_BT_STD_CEA861
discrete video standards. Extending the capability set to allow for
setting CVT and GTF standards. This change, along with adding the
support for calculating CVT, GTF timings in v4l2-ctl would extend
the number of resolutions supported by vivid to almost any custom
resolution.

Also extending the limits on min and max pixel clock to accommodate
pixel clock range provided by cvt/gtf for resolutions ranging from
640x360p50 to 4kx2Kp60.

Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ov2640: add missing consumer.h include

Needed for mips and sh platforms

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] sur40: fix occasional hard freeze due to buffer queue underrun

This patch fixes a kernel panic which occurs when buf_list is empty. This can
happen occasionally when user space is under heavy load (e.g. due to image
processing on the CPU) and new buffers aren't re-queued fast enough. In that
case, vb2_start_streaming_called can return true, but when the spinlock
is taken and sur40_poll attempts to fetch the next buffer from buf_list, the
list is in fact empty.

This patch needs to be applied on top of the queued one adding V4L2 support
to the sur40 driver.

Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx23885: Always initialise dev->slock spinlock

The slock spinlock in the cx23885_dev struct is only initialised if analogue
video is being used, but is used in other places too, leading to the attached
lockdep complaint.

Move the lock initialisation so that it is done unconditionally.

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 4413 Comm: scandvb Tainted: G        W       4.0.0-rc1-fsdevel+ #25
Hardware name: System manufacturer System Product Name/P5Q PRO TURBO, BIOS 0701    10/08/2012
 0000000000000000 ffff880129d779d8 ffffffff8162bbdf 0000000000000006
 0000000000000000 ffff880129d77aa8 ffffffff810780e3 0000000000000001
 0000000000000046 0000000000000004 ffffffff81c3f180 0000000000000000
Call Trace:
 [<ffffffff8162bbdf>] dump_stack+0x4c/0x65
 [<ffffffff810780e3>] __lock_acquire+0x7b5/0x1a0e
 [<ffffffff810799ee>] lock_acquire+0x97/0x10c
 [<ffffffffa006494e>] ? cx23885_buf_queue+0x69/0x142 [cx23885]
 [<ffffffff8102e9bc>] ? amd_set_subcaches+0x19b/0x19b
 [<ffffffff816313b4>] _raw_spin_lock_irqsave+0x36/0x4a
 [<ffffffffa006494e>] ? cx23885_buf_queue+0x69/0x142 [cx23885]
 [<ffffffffa006494e>] cx23885_buf_queue+0x69/0x142 [cx23885]
 [<ffffffffa00662cb>] buffer_queue+0x17/0x19 [cx23885]
 [<ffffffffa00382d5>] __enqueue_in_driver+0x6a/0x6f [videobuf2_core]
 [<ffffffffa0038ead>] vb2_start_streaming+0x37/0x129 [videobuf2_core]
 [<ffffffffa003a6c0>] vb2_internal_streamon+0xc5/0x105 [videobuf2_core]
 [<ffffffffa003b889>] __vb2_init_fileio+0x224/0x286 [videobuf2_core]
 [<ffffffffa003bcc0>] ? vb2_thread_start+0x7b/0x15f [videobuf2_core]
 [<ffffffffa0050182>] ? vb2_dvb_start_feed+0x86/0x86 [videobuf2_dvb]
 [<ffffffffa003bd06>] vb2_thread_start+0xc1/0x15f [videobuf2_core]
 [<ffffffff8150d393>] ? dmx_section_feed_start_filtering+0x2f/0x14f
 [<ffffffffa0050157>] vb2_dvb_start_feed+0x5b/0x86 [videobuf2_dvb]
 [<ffffffff8150d461>] dmx_section_feed_start_filtering+0xfd/0x14f
 [<ffffffff8150afc7>] dvb_dmxdev_filter_start+0x23f/0x315
 [<ffffffff8150b6ad>] dvb_demux_do_ioctl+0x1fb/0x556
 [<ffffffff81509e94>] dvb_usercopy+0xb4/0x11c
 [<ffffffff8150b4b2>] ? dvb_dmxdev_ts_callback+0xd0/0xd0
 [<ffffffff8150a11a>] dvb_demux_ioctl+0x10/0x14
 [<ffffffff81144ac4>] do_vfs_ioctl+0x3c1/0x474
 [<ffffffff8126f181>] ? file_has_perm+0x5b/0x7f
 [<ffffffff810bf6ca>] ? __audit_syscall_entry+0xbc/0xde
 [<ffffffff81144bcc>] SyS_ioctl+0x55/0x7a
 [<ffffffff81631d52>] system_call_fastpath+0x12/0x17

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] s5p-jpeg: Remove some unused functions

Removes some functions that are not used anywhere:
s5p_jpeg_input_raw_y16() s5p_jpeg_timer_disable() s5p_jpeg_timer_enable().

This was partially found by using a static code analysis program called
cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] s5p-jpeg: Initialize jpeg_addr fields to zero

JPEG codecs on Exynos4 and Exynos3250 SoCs utilize different number
of planes for storing the raw image data, depending on the format
of the image being processed. For the unused planes a random data
was being written to the related registers. Regardless of the fact
that this seemed not to be harmful, fix the issue for clarity reasons.

Reported-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] s5p-jpeg: add 5420 family support

JPEG IP found in Exynos5420 is similar to what is in Exynos3250, but
there are some subtle differences which this patch takes into account.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] m88ts2022: remove from Makefile

Remove target from Makefile: this driver no longer exists.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: xilinx: Add Test Pattern Generator driver

The TPG generates multiple static or dynamic test patterns. The driver
currently hardcodes the pattern to the moving box pattern.

Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: xilinx: Add Video Timing Controller driver

The Video Timing Controller (VTC) includes a timing detector and/or a
timing generator. Only the generator is currently supported.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: xilinx: Add Xilinx Video IP core

Xilinx platforms have no hardwired video capture or video processing
interface. Users create capture and memory to memory processing
pipelines in the FPGA fabric to suit their particular needs, by
instantiating video IP cores from a large library.

The Xilinx Video IP core is a framework that models a video pipeline
described in the device tree and expose the pipeline to userspace
through the media controller and V4L2 APIs.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: of: Add v4l2_of_parse_link() function

The function fills a link data structure with the device node and port
number at both the local and remote ends of a link defined by one of its
endpoint nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: Add VUY8 24 bits bus format

Add VUY8 24 bits bus format, V4L2_MBUS_FMT_VUY8_1X24.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: Sort YUV formats of v4l2_mbus_pixelcode

Keep the formats sorted by type, bus_width, bits per component, samples
per pixel and order of subsamples, in that order.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: Add RBG and RGB 8:8:8 media bus formats on 24 and 32 bit busses

Add support and documentation for two media bus formats:
MEDIA_BUS_FMT_RBG888_1X24 and MEDIA_BUS_FMT_RGB888_1X32_PADHI

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: entity: Document the media_entity_ops structure

Currently, there's no documentation for the structure. Add a
kernel-doc nano documentation to it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx18: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ivtv: disable fbuf support if ivtvfb isn't loaded

Disable all fbuf-related functionality if ivtvfb isn't loaded. This
caused various v4l2-compliance failures.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ivtv: replace crop by selection

Replace the old g/s_crop ioctls by the new g/s_selection ioctls.
This solves a v4l2-compliance failure, and it is something that needs
to be done anyway to eventually be able to remove the old g/s_crop
ioctl ops.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] sta2x11: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: sh_vou: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] usbvision: fix leak of usb_dev on failure paths in usbvision_probe()

There is no usb_put_dev() on failure paths in usbvision_probe().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2_plane_pix_format: use __u32 bytesperline instead of __u16

While running v4l2-compliance tests on vivid I suddenly got errors due to
a call to vmalloc_user with size 0 from vb2.

Digging deeper into the cause I discovered that this was due to the fact that
struct v4l2_plane_pix_format defines bytesperline as a __u16 instead of a __u32.

The test I was running selected a format of 4 * 4096 by 4 * 2048 with a 32
bit pixelformat.

So bytesperline was 4 * 4 * 4096 = 65536, which becomes 0 in a __u16. And
bytesperline * height is suddenly 0 as well. While the vivid driver may be
a virtual driver, it is to be expected that this limit will be hit for real
hardware as well in the near future: 8k deep-color video will already reach
it.

The solution is to change the type to __u32. The only drivers besides vivid
that use the multiplanar API are little-endian ARM and SH platforms (exynos,
ti-vpe, vsp1), so this is safe.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: davinci: vpfe_capture: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx231xx: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] usbvision: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] tm6000: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] hdpvr: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] gadget/uvc: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] wl128x: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] m2m-deinterlace: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] meye: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dt3155v4l: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] radio-bcm2048: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7146: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vim2m: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ivtv: embed video_device

Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ts2020: do not use i2c_transfer() on sleep()

There is no need to use bulk i2c_transfer() to write single register.
Use write register function instead.

Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] m88ts2022: remove obsolete driver

This driver was replaced by ts2020 driver.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dw2102: switch ts2022 to ts2020 driver

Change ts2022 driver to ts2020 driver. ts2020 driver supports
both tuner chip models.

That affects TechnoTrend TT-connect S2-4600 DVB-S/S2 device, which
Olli just added.

Cc: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dvbsky: switch ts2022 to ts2020 driver

Change ts2022 driver to ts2020 driver. ts2020 driver supports
both tuner chip models.

Cc: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] smipcie: switch ts2022 to ts2020 driver

Change ts2022 driver to ts2020 driver. ts2020 driver supports
both tuner chip models.

Cc: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx23885: switch ts2022 to ts2020 driver

Change ts2022 driver to ts2020 driver. ts2020 driver supports
both chip models.

Cc: Olli Salonen <olli.salonen@iki.fi>
Cc: Nibble Max <nibble.max@gmail.com>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] em28xx: switch PCTV 461e to ts2020 driver

Change ts2022 driver to ts2020 driver as ts2020 driver now supports
both models.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ts2020: implement I2C client bindings

Implement I2C binding model.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ts2020: add support for TS2022

TS2022 is slightly newer and different version of same tuner, which
could be supported with rather small changes. Tuner type is
auto-detected.

Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dw2102: TechnoTrend TT-connect S2-4600 DVB-S/S2 tuner

TechnoTrend TT-connect S2-4600 is a USB2.0 DVB-S/S2 tuner using the popular
Montage M88DS3103/M88TS2022 demod/tuner.

The demodulator needs a firmware. Antti posted a firmware when releasing
support for PCTV 461e, available here:
http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dw2102: store i2c client for tuner into dw2102_state

Prepare the dw2102 driver for tuner drivers that are implemented as I2C
drivers (such as m88ts2022). The I2C client is stored in to the state
and released at disconnect.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dw2102: combine su3000_state and s6x0_state into dw2102_state

Two separate state structs are defined for different devices inside the
dw2102. Combine them, as both only contain one element.

This will also make it easier to further cleanup the driver.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] m88ts2022: Nested loops shouldn't use the same index variable

There are a pair of nested loops inside m88ts2022_cmd() that use the same
index variable, but for different things.  Split the variable.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] smiapp: Clean up smiapp_get_pdata()

Don't set rval when it's not used (the function returns a pointer to struct
smiapp_platform_data).

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: i2c: add support for omnivision's ov2659 sensor

this patch adds support for omnivision's ov2659
sensor, the driver supports following features:
1: Asynchronous probing
2: DT support
3: Media controller support

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] DocBook media: fix broken EIA hyperlink

This fixes the bibliography hyperlink to "http://www.eia.org"
which now redirects to a page with a "404 Not found" error.

The latest update to the document referred to is now available
on the Consumer Electronics Association website.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] DocBook media: improve V4L2_DV_FL_HALF_LINE documentation

Explicitly specify where the half-line is added or removed in
each field.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vivid-tpg.c: fix wrong Bt.2020 coefficients

Mistyping 0.2627 as 0.2726 I can understand, but -0.4598 as -0.4629? No idea how
I managed that. Anyway, these coefficients are now correct again.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] DocBook media: fix BT.2020 description

One number was wrong (0.6789 -> 0.6780) and Y' should have been Yc'.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] DocBook media: improve event documentation

It always annoyed me that the event type documentation was separate from the struct
v4l2_event documentation. This patch moves it all to one place, VIDIOC_DQEVENT.

This makes much more sense.

Also changed the 'changes-flags' ref to 'ctrl-changes-flags' since this referred to
control changes. There is a src-changes-flags as well, so 'changes-flags' was a bit
vague.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] smiapp: Read link-frequencies property from the endpoint node

The documentation stated that the link-frequencies property belongs to the
endpoint node, not to the device's of_node. Fix this.

There are no DT board descriptions using the driver yet, so a fix in the
driver is sufficient.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mn88473: implement lock for all delivery systems

Add capability to check if digital TV has lock for all delivery
systems.

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mn88472: define symbol rate limits

w_scan complains about missing symbol rate limits:
This dvb driver is *buggy*: the symbol rate limits are undefined - please report to linuxtv.org

Lets add some reasonable limits in order to keep w_scan happy :)

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mn88473: define symbol rate limits

w_scan complains about missing symbol rate limits:
This dvb driver is *buggy*: the symbol rate limits are undefined - please report to linuxtv.org

Lets add some reasonable limits in order to keep w_scan happy :)

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mn88472: check if firmware is already running before loading it

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mn88473: check if firmware is already running before loading it

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mn88473: implement firmware parity check

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mn88472: implement firmware parity check

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mn88472: implement lock for all delivery systems

The increase of the lock timeout is needed for dvb-t2.

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: lower the rc poll time to mitigate i2c transfer errors

The Astrometa device has issues with i2c transfers. Lowering the
poll time somehow makes these errors disappear.

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] r820t: change read_gain() code to match register layout

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] r820t: add DVBC profile in sysfreq_sel

This will make the Astrometa DVB-T/T2/C usb stick be able to pick up
muxes around 290-314 MHz.

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: mt9v032: Add OF support

Parse DT properties into a platform data structure when a DT node is
available.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] of: Add vendor prefix for Aptina Imaging

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: mt9v032: Consider control initialization errors as fatal

The device requires control to be properly operated, they're not
optional.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: mt9p031: Convert to the gpiod API

This simplifies platform data and DT integration.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: i2c: mt9p031: add support for asynchronous probing

Both synchronous and asynchronous mt9p031 subdevice probing
is supported by this patch.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: i2c: mt9p031: make sure we destroy the mutex

Make sure to call mutex_destroy() in case of probe failure or module
unload.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mt9p031: fixed calculation of clk_div

There must be used 'min_t', not 'max_t' for calculating the divider.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] staging: media: omap4iss: video: Don't WARN() on unknown pixel formats

When mapping from a V4L2 pixel format to a media bus format in the
VIDIOC_TRY_FMT and VIDIOC_S_FMT handlers, the requested format may be
unsupported by the driver. Return a hardcoded default format instead of
WARN()ing in that case.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] staging: media: omap4iss: Cleanup media entities after unregistration

The ipipeif, ipipe and resizer media entities are cleaned up before
unregistering the media device, creating a race condition. Fix it by
cleaning them up at cleanup time.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] add raw video stream support for Samsung SUR40

This patch adds raw video support for the Samsung SUR40 using vbuf2-dma-sg.
All tests from v4l2-compliance pass. Support for VB2_USERPTR is currently
disabled due to unexpected interference with dma-sg buffer sizes.

Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: fix compile warning: %ld -> %zd]

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] DocBook media: fix awkward language in VIDIOC_QUERYCAP

Fix some awkward language in the VIDIOC_QUERYCAP description.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] DocBook media: fix VIDIOC_CROPCAP type description

The type field of VIDIOC_CROPCAP does not allow the MPLANE variants, just
as all the other crop/selection related ioctls.

Fix the description of CROPCAP and G_CROP and make the text describing
this consistent for all selection ioctls.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>