Colin Ian King [Fri, 17 Sep 2021 11:57:47 +0000 (12:57 +0100)]
octeontx2-af: Fix uninitialized variable val
In the case where the condition !is_rvu_otx2(rvu) is false variable
val is not initialized and can contain a garbage value. Fix this by
initializing val to zero and bit-wise or'ing in BIT_ULL(51) to val
for the true condition case of !is_rvu_otx2(rvu).
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes:
4b5a3ab17c6c ("octeontx2-af: Hardware configuration for inline IPsec")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Fri, 17 Sep 2021 14:16:54 +0000 (14:16 +0000)]
net: e1000e: solve insmod 'Unknown symbol mutex_lock' error
After I turn on the CONFIG_LOCK_STAT=y, insmod e1000e.ko will report:
[ 5.641579] e1000e: Unknown symbol mutex_lock (err -2)
[ 90.775705] e1000e: Unknown symbol mutex_lock (err -2)
[ 132.252339] e1000e: Unknown symbol mutex_lock (err -2)
This problem fixed after include <linux/mutex.h>.
Signed-off-by: Hao Chen <chenhaoa@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Thu, 16 Sep 2021 07:37:29 +0000 (15:37 +0800)]
net: netsec: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 16 Sep 2021 21:27:41 +0000 (14:27 -0700)]
net: phy: broadcom: Enable 10BaseT DAC early wake
Enable the DAC early wake when then link operates at 10BaseT allows
power savings in the hundreds of milli Watts by shutting down the
transmitter. A number of errata have been issued for various Gigabit
PHYs and the recommendation is to enable both the early and forced DAC
wake to be on the safe side. This needs to be done dynamically based
upon the link state, which is why a link_change_notify callback is
utilized.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210916212742.1653088-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 17 Sep 2021 02:09:54 +0000 (19:09 -0700)]
Merge branch 'net-dsa-b53-clean-up-cpu-imp-ports'
Rafał Miłecki says:
====================
net: dsa: b53: Clean up CPU/IMP ports
This has been tested on:
1. Luxul XBR-4500 with used CPU port 5
[ 8.361438] b53-srab-switch
18007000.ethernet-switch: found switch: BCM53012, rev 0
2. Netgear R8000 with used CPU port 8
[ 4.453858] b53-srab-switch
18007000.ethernet-switch: found switch: BCM53012, rev 5
====================
Link: https://lore.kernel.org/r/20210916120354.20338-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafał Miłecki [Thu, 16 Sep 2021 12:03:54 +0000 (14:03 +0200)]
net: dsa: b53: Drop unused "cpu_port" field
It's set but never used anymore.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafał Miłecki [Thu, 16 Sep 2021 12:03:53 +0000 (14:03 +0200)]
net: dsa: b53: Improve flow control setup on BCM5301x
According to the Broadcom's reference driver flow control needs to be
enabled for any CPU switch port (5, 7 or 8 - depending on which one is
used). Current code makes it work only for the port 5. Use
dsa_is_cpu_port() which solved that problem.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafał Miłecki [Thu, 16 Sep 2021 12:03:52 +0000 (14:03 +0200)]
net: dsa: b53: Drop BCM5301x workaround for a wrong CPU/IMP port
On BCM5301x port 8 requires a fixed link when used.
Years ago when b53 was an OpenWrt downstream driver (with configuration
based on sometimes bugged NVRAM) there was a need for a fixup. In case
of forcing fixed link for (incorrectly specified) port 5 the code had to
actually setup port 8 link.
For upstream b53 driver with setup based on DT there is no need for that
workaround. In DT we have and require correct ports setup.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafał Miłecki [Thu, 16 Sep 2021 12:03:51 +0000 (14:03 +0200)]
net: dsa: b53: Include all ports in "enabled_ports"
Make "enabled_ports" bitfield contain all available switch ports
including a CPU port. This way there is no need for fixup during
initialization.
For BCM53010, BCM53018 and BCM53019 include also other available ports.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 16 Sep 2021 20:58:38 +0000 (13:58 -0700)]
Merge git://git./linux/kernel/git/netdev/net
No conflicts!
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 16 Sep 2021 20:05:42 +0000 (13:05 -0700)]
Merge tag 'net-5.15-rc2' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- vhost_net: fix OoB on sendmsg() failure
- mlx5: bridge, fix uninitialized variable usage
- bnxt_en: fix error recovery regression
Current release - new code bugs:
- bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset()
Previous releases - regressions:
- r6040: restore MDIO clock frequency after MAC reset
- tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
- dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Previous releases - always broken:
- ptp: dp83640: don't define PAGE0, avoid compiler warning
- igc: fix tunnel segmentation offloads
- phylink: update SFP selected interface on advertising changes
- stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume
- mlx5e: fix mutual exclusion between CQE compression and HW TS
Misc:
- bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode
- sfc: fallback for lack of xdp tx queues
- hns3: add option to turn off page pool feature"
* tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
mlxbf_gige: clear valid_polarity upon open
igc: fix tunnel offloading
net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
net: wan: wanxl: define CROSS_COMPILE_M68K
selftests: nci: replace unsigned int with int
net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Revert "net: phy: Uniform PHY driver access"
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
ptp: dp83640: don't define PAGE0
bnx2x: Fix enabling network interfaces without VFs
Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers""
tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
net-caif: avoid user-triggerable WARN_ON(1)
bpf, selftests: Add test case for mixed cgroup v1/v2
bpf, selftests: Add cgroup v1 net_cls classid helpers
bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode
bpf: Add oversize check before call kvcalloc()
net: hns3: fix the timing issue of VF clearing interrupt sources
net: hns3: fix the exception when query imp info
net: hns3: disable mac in flr process
...
Guenter Roeck [Thu, 9 Sep 2021 03:57:43 +0000 (20:57 -0700)]
net: 6pack: Fix tx timeout and slot time
tx timeout and slot time are currently specified in units of HZ. On
Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this
results in the following error message.
drivers/net/hamradio/6pack.c: In function 'sixpack_open':
drivers/net/hamradio/6pack.c:71:41: error:
unsigned conversion from 'int' to 'unsigned char'
changes value from '256' to '0'
In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:
https://www.linux-ax25.org/wiki/6PACK
Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.
Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:
mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);
and the SIXP_TXDELAY walue is sent as a byte over the wire.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 28 Apr 2020 21:31:24 +0000 (23:31 +0200)]
drm/rockchip: cdn-dp-core: Make cdn_dp_core_resume __maybe_unused
With the new static annotation, the compiler warns when the functions
are actually unused:
drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function]
1123 | static int cdn_dp_resume(struct device *dev)
| ^~~~~~~~~~~~~
Mark them __maybe_unused to suppress that warning as well.
[ Not so 'new' static annotations any more, and I removed the part of
the patch that added __maybe_unused to cdn_dp_suspend(), because it's
used by the shutdown/remove code.
So only the resume function ends up possibly unused if CONFIG_PM isn't
set - Linus ]
Fixes:
7c49abb4c2f8 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Thu, 9 Sep 2021 18:47:14 +0000 (11:47 -0700)]
cpufreq: vexpress: Drop unused variable
arm:allmodconfig fails to build with the following error.
drivers/cpufreq/vexpress-spc-cpufreq.c:454:13: error:
unused variable 'cur_cluster'
Remove the unused variable.
Fixes:
bb8c26d9387f ("cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Thu, 9 Sep 2021 05:00:33 +0000 (22:00 -0700)]
alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile
Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine. One exception is alpha. This
results in a number of compile errors such as
drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
drivers/net/wan/lmc/lmc_main.c:1782:50: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
drivers/atm/ambassador.c: In function 'do_loader_command':
drivers/atm/ambassador.c:1747:58: error:
passing argument 1 of 'virt_to_bus' discards 'volatile'
qualifier from pointer target type
Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 16 Sep 2021 18:14:47 +0000 (11:14 -0700)]
3com 3c515: make it compile on 64-bit architectures
This driver isn't enabled most places because of the ISA config
dependency, but alpha still has it. And I think the 'Jensen' actually
did have an ISA slot.
However, it doesn't build cleanly, because the "Vortex bus master" code
just casts the skb->data pointer to 'int':
outl((int) (skb->data), ioaddr + Wn7_MasterAddr);
which is all kinds of broken. Even on a good old traditional PC/AT it
would be broken because the high bits will be random kernel address
bits, but presumably the hardware ignores those bits. I mean, it's ISA.
We're talking 16MB dma limits. The "good old days".
Make the build happy with this kind of craziness by using the proper
isa_virt_to_bus() handling that the full bus master code uses anyway
(the Vortex bus mastering is a limited special case).
Who knows, this might even work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 16 Sep 2021 17:32:00 +0000 (10:32 -0700)]
Merge tag 'for-5.15/parisc-4' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"Fix a build warning when using the PAGE0 pointer"
* tag 'for-5.15/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Use absolute_pointer() to define PAGE0
Linus Torvalds [Thu, 16 Sep 2021 17:26:48 +0000 (10:26 -0700)]
Merge tag 'm68k-for-v5.15-tag2' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k fixes from Geert Uytterhoeven:
- Warning fixes to mitigate CONFIG_WERROR=y
* tag 'm68k-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: mvme: Remove overdue #warnings in RTC handling
m68k: Double cast io functions to unsigned long
Srujana Challa [Thu, 16 Sep 2021 09:41:14 +0000 (15:11 +0530)]
octeontx2-af: Hardware configuration for inline IPsec
On OcteonTX2/CN10K SoC, the admin function (AF) is the only one
with all priviliges to configure HW and alloc resources, PFs and
it's VFs have to request AF via mailbox for all their needs.
This patch adds new mailbox messages for CPT PFs and VFs to configure
HW resources for inline-IPsec.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tianjia Zhang [Thu, 16 Sep 2021 03:37:38 +0000 (11:37 +0800)]
net/tls: support SM4 GCM/CCM algorithm
The RFC8998 specification defines the use of the ShangMi algorithm
cipher suites in TLS 1.3, and also supports the GCM/CCM mode using
the SM4 algorithm.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 15 Sep 2021 21:58:23 +0000 (14:58 -0700)]
Revert "net: wwan: iosm: firmware flashing and coredump collection"
The devlink parameters are not the right mechanism to pass
extra parameters to device flashing. The params added are
also undocumented.
This reverts commit
13bb8429ca98 ("net: wwan: iosm: firmware
flashing and coredump collection").
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Thompson [Wed, 15 Sep 2021 18:08:48 +0000 (14:08 -0400)]
mlxbf_gige: clear valid_polarity upon open
The network interface managed by the mlxbf_gige driver can
get into a problem state where traffic does not flow.
In this state, the interface will be up and enabled, but
will stop processing received packets. This problem state
will happen if three specific conditions occur:
1) driver has received more than (N * RxRingSize) packets but
less than (N+1 * RxRingSize) packets, where N is an odd number
Note: the command "ethtool -g <interface>" will display the
current receive ring size, which currently defaults to 128
2) the driver's interface was disabled via "ifconfig oob_net0 down"
during the window described in #1.
3) the driver's interface is re-enabled via "ifconfig oob_net0 up"
This patch ensures that the driver's "valid_polarity" field is
cleared during the open() method so that it always matches the
receive polarity used by hardware. Without this fix, the driver
needs to be unloaded and reloaded to correct this problem state.
Fixes:
f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Wed, 15 Sep 2021 15:59:46 +0000 (21:29 +0530)]
octeontx2-pf: CN10K: Hide RPM stats over ethtool
CN10K MAC block (RPM) differs in number of stats compared to Octeontx2
MAC block (CGX). RPM supports stats for each class of PFC and error
packets etc. It would be difficult for user to read stats from ethtool
and map to their definition.
New debugfs file is already added to read RPM stats along with their
definition. This patch adds proper checks such that RPM stats will not
be part of ethtool.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 15 Sep 2021 17:19:07 +0000 (10:19 -0700)]
igc: fix tunnel offloading
Checking tunnel offloading, it turns out that offloading doesn't work
as expected. The following script allows to reproduce the issue.
Call it as `testscript DEVICE LOCALIP REMOTEIP NETMASK'
=== SNIP ===
if [ $# -ne 4 ]
then
echo "Usage $0 DEVICE LOCALIP REMOTEIP NETMASK"
exit 1
fi
DEVICE="$1"
LOCAL_ADDRESS="$2"
REMOTE_ADDRESS="$3"
NWMASK="$4"
echo "Driver: $(ethtool -i ${DEVICE} | awk '/^driver:/{print $2}') "
ethtool -k "${DEVICE}" | grep tx-udp
echo
echo "Set up NIC and tunnel..."
ip addr add "${LOCAL_ADDRESS}/${NWMASK}" dev "${DEVICE}"
ip link set "${DEVICE}" up
sleep 2
ip link add vxlan1 type vxlan id 42 \
remote "${REMOTE_ADDRESS}" \
local "${LOCAL_ADDRESS}" \
dstport 0 \
dev "${DEVICE}"
ip addr add fc00::1/64 dev vxlan1
ip link set vxlan1 up
sleep 2
rm -f vxlan.pcap
echo "Running tcpdump and iperf3..."
( nohup tcpdump -i any -w vxlan.pcap >/dev/null 2>&1 ) &
sleep 2
iperf3 -c fc00::2 >/dev/null
pkill tcpdump
echo
echo -n "Max. Paket Size: "
tcpdump -r vxlan.pcap -nnle 2>/dev/null \
| grep "${LOCAL_ADDRESS}.*> ${REMOTE_ADDRESS}.*OTV" \
| awk '{print $8}' | awk -F ':' '{print $1}' \
| sort -n | tail -1
echo
ip link del vxlan1
ip addr del ${LOCAL_ADDRESS}/${NWMASK} dev "${DEVICE}"
=== SNAP ===
The expected outcome is
Max. Paket Size: 64904
This is what you see on igb, the code igc has been taken from.
However, on igc the output is
Max. Paket Size: 1516
so the GSO aggregate packets are segmented by the kernel before calling
igc_xmit_frame. Inside the subsequent call to igc_tso, the check for
skb_is_gso(skb) fails and the function returns prematurely.
It turns out that this occurs because the feature flags aren't set
entirely correctly in igc_probe. In contrast to the original code
from igb_probe, igc_probe neglects to set the flags required to allow
tunnel offloading.
Setting the same flags as igb fixes the issue on igc.
Fixes:
34428dff3679 ("igc: Add GSO partial support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Wed, 15 Sep 2021 04:47:27 +0000 (07:47 +0300)]
net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
Remove the assert from the callback priv lookup function since it does
not require RTNL lock and is already protected by flow_indr_block_lock.
This will avoid warnings from being emitted to dmesg if the driver
registers its callback after an ingress qdisc was created for a
netdevice.
The warnings started after the following patch was merged:
commit
74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adam Borowski [Sun, 12 Sep 2021 21:23:21 +0000 (23:23 +0200)]
net: wan: wanxl: define CROSS_COMPILE_M68K
It was used but never set. The hardcoded value from before the dawn of
time was non-standard; the usual name for cross-tools is $TRIPLET-$TOOL
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiang wangx [Thu, 16 Sep 2021 12:24:42 +0000 (20:24 +0800)]
selftests: nci: replace unsigned int with int
Should not use comparison of unsigned expressions < 0.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:42 +0000 (22:58 +0800)]
net: thunderx: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:34 +0000 (22:58 +0800)]
net: hinic: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:27 +0000 (22:58 +0800)]
net: ethoc: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:19 +0000 (22:58 +0800)]
net: enetc: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:58:11 +0000 (22:58 +0800)]
net: chelsio: cxgb4vf: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:57:56 +0000 (22:57 +0800)]
net: atl1e: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:57:48 +0000 (22:57 +0800)]
net: atl1c: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cai Huoqing [Wed, 15 Sep 2021 14:57:41 +0000 (22:57 +0800)]
net: arc_emac: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Helge Deller [Thu, 16 Sep 2021 06:35:42 +0000 (08:35 +0200)]
parisc: Use absolute_pointer() to define PAGE0
Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning:
arch/parisc/kernel/setup.c: In function 'start_parisc':
error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0
Signed-off-by: Helge Deller <deller@gmx.de>
Co-Developed-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 16 Sep 2021 00:18:56 +0000 (17:18 -0700)]
Merge tag 'hyperv-fixes-signed-
20210915' of git://git./linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix kernel crash caused by uio driver (Vitaly Kuznetsov)
- Remove on-stack cpumask from HV APIC code (Wei Liu)
* tag 'hyperv-fixes-signed-
20210915' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself
asm-generic/hyperv: provide cpumask_to_vpset_noself
Drivers: hv: vmbus: Fix kernel crash upon unbinding a device from uio_hv_generic driver
Linus Torvalds [Thu, 16 Sep 2021 00:06:01 +0000 (17:06 -0700)]
Merge tag 'rtc-5.15-fixes' of git://git./linux/kernel/git/abelloni/linux
Pull RTC fix from Alexandre Belloni:
"Fix a locking issue in the cmos rtc driver"
* tag 'rtc-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: cmos: Disable irq around direct invocation of cmos_interrupt()
Vladimir Oltean [Tue, 14 Sep 2021 13:47:26 +0000 (16:47 +0300)]
net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
Sometimes when unbinding the mv88e6xxx driver on Turris MOX, these error
messages appear:
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 1 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 0 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 100 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 1 from fdb: -2
mv88e6085
d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 0 from fdb: -2
(and similarly for other ports)
What happens is that DSA has a policy "even if there are bugs, let's at
least not leak memory" and dsa_port_teardown() clears the dp->fdbs and
dp->mdbs lists, which are supposed to be empty.
But deleting that cleanup code, the warnings go away.
=> the FDB and MDB lists (used for refcounting on shared ports, aka CPU
and DSA ports) will eventually be empty, but are not empty by the time
we tear down those ports. Aka we are deleting them too soon.
The addresses that DSA complains about are host-trapped addresses: the
local addresses of the ports, and the MAC address of the bridge device.
The problem is that offloading those entries happens from a deferred
work item scheduled by the SWITCHDEV_FDB_DEL_TO_DEVICE handler, and this
races with the teardown of the CPU and DSA ports where the refcounting
is kept.
In fact, not only it races, but fundamentally speaking, if we iterate
through the port list linearly, we might end up tearing down the shared
ports even before we delete a DSA user port which has a bridge upper.
So as it turns out, we need to first tear down the user ports (and the
unused ones, for no better place of doing that), then the shared ports
(the CPU and DSA ports). In between, we need to ensure that all work
items scheduled by our switchdev handlers (which only run for user
ports, hence the reason why we tear them down first) have finished.
Fixes:
161ca59d39e9 ("net: dsa: reference count the MDB entries at the cross-chip notifier level")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210914134726.2305133-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 14 Sep 2021 14:05:15 +0000 (17:05 +0300)]
Revert "net: phy: Uniform PHY driver access"
This reverts commit
3ac8eed62596387214869319379c1fcba264d8c6, which did
more than it said on the box, and not only it replaced to_phy_driver
with phydev->drv, but it also removed the "!drv" check, without actually
explaining why that is fine.
That patch in fact breaks suspend/resume on any system which has PHY
devices with no drivers bound.
The stack trace is:
Unable to handle kernel NULL pointer dereference at virtual address
00000000000000e8
pc : mdio_bus_phy_suspend+0xd8/0xec
lr : dpm_run_callback+0x38/0x90
Call trace:
mdio_bus_phy_suspend+0xd8/0xec
dpm_run_callback+0x38/0x90
__device_suspend+0x108/0x3cc
dpm_suspend+0x140/0x210
dpm_suspend_start+0x7c/0xa0
suspend_devices_and_enter+0x13c/0x540
pm_suspend+0x2a4/0x330
Examples why that assumption is not fine:
- There is an MDIO bus with a PHY device that doesn't have a specific
PHY driver loaded, because mdiobus_register() automatically creates a
PHY device for it but there is no specific PHY driver in the system.
Normally under those circumstances, the generic PHY driver will be
bound lazily to it (at phy_attach_direct time). But some Ethernet
drivers attach to their PHY at .ndo_open time. Until then it, the
to-be-driven-by-genphy PHY device will not have a driver. The blamed
patch amounts to saying "you need to open all net devices before the
system can suspend, to avoid the NULL pointer dereference".
- There is any raw MDIO device which has 'plausible' values in the PHY
ID registers 2 and 3, which is located on an MDIO bus whose driver
does not set bus->phy_mask = ~0 (which prevents auto-scanning of PHY
devices). An example could be a MAC's internal MDIO bus with PCS
devices on it, for serial links such as SGMII. PHY devices will get
created for those PCSes too, due to that MDIO bus auto-scanning, and
although those PHY devices are not used, they do not bother anybody
either. PCS devices are usually managed in Linux as raw MDIO devices.
Nonetheless, they do not have a PHY driver, nor does anybody attempt
to connect to them (because they are not a PHY), and therefore this
patch breaks that.
The goal itself of the patch is questionable, so I am going for a
straight revert. to_phy_driver does not seem to have a need to be
replaced by phydev->drv, in fact that might even trigger code paths
which were not given too deep of a thought.
For instance:
phy_probe populates phydev->drv at the beginning, but does not clean it
up on any error (including EPROBE_DEFER). So if the phydev driver
requests probe deferral, phydev->drv will remain populated despite there
being no driver bound.
If a system suspend starts in between the initial probe deferral request
and the subsequent probe retry, we will be calling the phydev->drv->suspend
method, but _before_ any phydev->drv->probe call has succeeded.
That is to say, if the phydev->drv is allocating any driver-private data
structure in ->probe, it pretty much expects that data structure to be
available in ->suspend. But it may not. That is a pretty insane
environment to present to PHY drivers.
In the code structure before the blamed patch, mdio_bus_phy_may_suspend
would just say "no, don't suspend" to any PHY device which does not have
a driver pointer _in_the_device_structure_ (not the phydev->drv). That
would essentially ensure that ->suspend will never get called for a
device that has not yet successfully completed probe. This is the code
structure the patch is returning to, via the revert.
Fixes:
3ac8eed62596 ("net: phy: Uniform PHY driver access")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210914140515.2311548-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 14 Sep 2021 13:43:31 +0000 (16:43 +0300)]
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
DSA supports connecting to a phy-handle, and has a fallback to a non-OF
based method of connecting to an internal PHY on the switch's own MDIO
bus, if no phy-handle and no fixed-link nodes were present.
The -ENODEV error code from the first attempt (phylink_of_phy_connect)
is what triggers the second attempt (phylink_connect_phy).
However, when the first attempt returns a different error code than
-ENODEV, this results in an unbalance of calls to phylink_create and
phylink_destroy by the time we exit the function. The phylink instance
has leaked.
There are many other error codes that can be returned by
phylink_of_phy_connect. For example, phylink_validate returns -EINVAL.
So this is a practical issue too.
Fixes:
aab9c4067d23 ("net: dsa: Plug in PHYLINK support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210914134331.2303380-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 15 Sep 2021 20:56:37 +0000 (13:56 -0700)]
qnx4: avoid stringop-overread errors
The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.
In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.
But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.
That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:
fs/qnx4/dir.c: In function ‘qnx4_readdir’:
fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
51 | size = strnlen(de->di_fname, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from fs/qnx4/qnx4.h:3,
from fs/qnx4/dir.c:16:
include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
45 | char di_fname[QNX4_SHORT_NAME_MAX];
| ^~~~~~~~
which is because the source code doesn't really make this whole "one of
two different types" explicit.
Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 6 Sep 2021 23:06:04 +0000 (16:06 -0700)]
sparc: avoid stringop-overread errors
The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.
As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work. This
results in various errors like:
arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
647 | if (!strcmp(names + ep[ret].name_offset, name))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.
This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).
Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 15 Sep 2021 19:11:48 +0000 (12:11 -0700)]
Merge branch 'absolute-pointer' (patches from Guenter)
Merge absolute_pointer macro series from Guenter Roeck:
"Kernel test builds currently fail for several architectures with error
messages such as the following.
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0
[-Werror=stringop-overread]
Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses if gcc's builtin functions are used for
those operations.
This series introduces absolute_pointer() to fix the problem.
absolute_pointer() disassociates a pointer from its originating symbol
type and context, and thus prevents gcc from making assumptions about
pointers passed to memory operations"
* emailed patches from Guenter Roeck <linux@roeck-us.net>:
alpha: Use absolute_pointer to define COMMAND_LINE
alpha: Move setup.h out of uapi
net: i825xx: Use absolute_pointer for memcpy from fixed memory location
compiler.h: Introduce absolute_pointer macro
Guenter Roeck [Wed, 15 Sep 2021 03:52:27 +0000 (20:52 -0700)]
alpha: Use absolute_pointer to define COMMAND_LINE
alpha:allmodconfig fails to build with the following error
when using gcc 11.x.
arch/alpha/kernel/setup.c: In function 'setup_arch':
arch/alpha/kernel/setup.c:493:13: error:
'strcmp' reading 1 or more bytes from a region of size 0
Avoid the problem by declaring COMMAND_LINE as absolute_pointer().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Wed, 15 Sep 2021 03:52:26 +0000 (20:52 -0700)]
alpha: Move setup.h out of uapi
Most of the contents of setup.h have no value for userspace
applications. The file was probably moved to uapi accidentally.
Keep the file in uapi to define the alpha-specific COMMAND_LINE_SIZE.
Move all other defines to arch/alpha/include/asm/setup.h.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Wed, 15 Sep 2021 03:52:25 +0000 (20:52 -0700)]
net: i825xx: Use absolute_pointer for memcpy from fixed memory location
gcc 11.x reports the following compiler warning/error.
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
Use absolute_pointer() to work around the problem.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Wed, 15 Sep 2021 03:52:24 +0000 (20:52 -0700)]
compiler.h: Introduce absolute_pointer macro
absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masami Hiramatsu [Wed, 15 Sep 2021 00:53:38 +0000 (09:53 +0900)]
tools/bootconfig: Define memblock_free_ptr() to fix build error
The lib/bootconfig.c file is shared with the 'bootconfig' tooling, and
as a result, the changes incommit
77e02cf57b6c ("memblock: introduce
saner 'memblock_free_ptr()' interface") need to also be reflected in the
tooling header file.
So define the new memblock_free_ptr() wrapper, and remove unused __pa()
and memblock_free().
Fixes:
77e02cf57b6c ("memblock: introduce saner 'memblock_free_ptr()' interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Wed, 15 Sep 2021 15:17:16 +0000 (16:17 +0100)]
Merge branch 'mlxsw-Add-support-for-transceiver-modules-reset'
Ido Schimmel says:
====================
mlxsw: Add support for transceiver modules reset
This patchset prepares mlxsw for future transceiver modules related [1]
changes and adds reset support via the existing 'ETHTOOL_RESET'
interface.
Patches #1-#6 are relatively straightforward preparations.
Patch #7 tracks the number of logical ports that are mapped to the
transceiver module and the number of logical ports using it that are
administratively up. Needed for both reset support and power mode policy
support.
Patches #8-#9 add required fields in device registers.
Patch #10 implements support for ethtool_ops::reset in order to reset
transceiver modules.
[1] https://lore.kernel.org/netdev/
20210824130344.1828076-1-idosch@idosch.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:14 +0000 (13:13 +0300)]
mlxsw: Add support for transceiver modules reset
Implement support for ethtool_ops::reset in order to reset transceiver
modules. The module backing the netdev is reset when the 'ETH_RESET_PHY'
flag is set. After a successful reset, the flag is cleared by the driver
and other flags are ignored. This is in accordance with the interface
documentation:
"The reset() operation must clear the flags for the components which
were actually reset. On successful return, the flags indicate the
components which were not reset, either because they do not exist in the
hardware or because they cannot be reset independently. The driver must
never reset any components that were not requested."
Reset is useful in order to allow a module to transition out of a fault
state. From section 6.3.2.12 in CMIS 5.0: "Except for a power cycle, the
only exit path from the ModuleFault state is to perform a module reset
by taking an action that causes the ResetS transition signal to become
TRUE (see Table 6-11)".
An error is returned when the netdev is administratively up:
# ip link set dev swp11 up
# ethtool --reset swp11 phy
ETHTOOL_RESET 0x40
Cannot issue ETHTOOL_RESET: Invalid argument
# ip link set dev swp11 down
# ethtool --reset swp11 phy
ETHTOOL_RESET 0x40
Components reset: 0x40
An error is returned when the module is shared by multiple ports (split
ports) and the "phy-shared" flag is not set:
# devlink port split swp11 count 4
# ethtool --reset swp11s0 phy
ETHTOOL_RESET 0x40
Cannot issue ETHTOOL_RESET: Invalid argument
# ethtool --reset swp11s0 phy-shared
ETHTOOL_RESET 0x400000
Components reset: 0x400000
# devlink port unsplit swp11s0
# ethtool --reset swp11 phy
ETHTOOL_RESET 0x40
Components reset: 0x40
An error is also returned when one of the ports using the module is
administratively up:
# devlink port split swp11 count 4
# ip link set dev swp11s1 up
# ethtool --reset swp11s0 phy-shared
ETHTOOL_RESET 0x400000
Cannot issue ETHTOOL_RESET: Invalid argument
# ip link set dev swp11s1 down
# ethtool --reset swp11s0 phy-shared
ETHTOOL_RESET 0x400000
Components reset: 0x400000
Reset is performed by writing to the "rst" bit of the PMAOS register,
which instructs the firmware to assert the reset signal connected to the
module for a fixed amount of time.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:13 +0000 (13:13 +0300)]
mlxsw: Make PMAOS pack function more generic
The PMAOS register has enable bits (e.g., PMAOS.ee) that allow changing
only a subset of the fields, which is exactly what subsequent patches
will need to do. Instead of passing multiple arguments to its pack
function, only pass the module index and let the rest be set by the
different callers.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:12 +0000 (13:13 +0300)]
mlxsw: reg: Add fields to PMAOS register
The Ports Module Administrative and Operational Status (PMAOS) register
configures and retrieves the per-module status. Extend it with fields
required to support various module settings such as reset and power
mode.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:11 +0000 (13:13 +0300)]
mlxsw: Track per-module port status
In the common port module core, track the number of logical ports that
are mapped to the port module and the number of logical ports using it
that are administratively up.
This will be used by later patches to potentially veto and control
certain operations on the module, such as reset and setting its power
mode.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:10 +0000 (13:13 +0300)]
mlxsw: spectrum: Do not return an error in mlxsw_sp_port_module_unmap()
The return value is never checked. Allows us to simplify a later patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:09 +0000 (13:13 +0300)]
mlxsw: spectrum: Do not return an error in ndo_stop()
The return value is not checked by the networking stack. Allows us to
simplify a later patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:08 +0000 (13:13 +0300)]
mlxsw: core_env: Convert 'module_info_lock' to a mutex
After the previous patch, the lock is always taken in process context so
it can be converted to a mutex. It is needed for future changes where we
will need to be able to sleep when holding the lock.
Convert the lock to a mutex.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:07 +0000 (13:13 +0300)]
mlxsw: core_env: Defer handling of module temperature warning events
Module temperature events are currently handled in softIRQ context,
requiring the 'module_info_lock' to be a spin lock. In future patchsets
we will need to be able to hold the lock while sleeping.
Therefore, defer handling of these events using a work queue so that the
next patch will be able to convert the lock to a mutex.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:06 +0000 (13:13 +0300)]
mlxsw: core: Remove mlxsw_core_is_initialized()
After the previous patch, the switch driver is always initialized last,
making this function redundant.
Remove it.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 15 Sep 2021 10:13:05 +0000 (13:13 +0300)]
mlxsw: core: Initialize switch driver last
Commit
961cf99a074f ("mlxsw: core: Re-order initialization sequence")
changed the initialization sequence so that the switch driver (e.g.,
mlxsw_spectrum) is initialized before registration with the hwmon and
thermal subsystems.
This was done in order to avoid situations where hwmon/thermal code uses
features not supported by current firmware version, which is only
validated as part of switch driver initialization.
Later, commit
b79cb787ac70 ("mlxsw: Move fw flashing code into core.c")
moved firmware validation and flashing code from the switch driver to
mlxsw_core so that it is performed before driver initialization.
Therefore, change the initialization sequence back to its original form.
In addition to being more straightforward, it will allow us to simplify
parts of the code in subsequent patches and future patchsets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Sep 2021 15:12:55 +0000 (16:12 +0100)]
Merge branch 'devlink-delete-publidh-api'
Leon Romanovsky says:
====================
devlink: Delete publish of single parameter API
This short series removes the single parameter publish/unpublish API
that does nothing expect mimics already existing
devlink_paramss_*publish calls.
In near future, we will be able to delete devlink_paramss_*publish too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Tue, 14 Sep 2021 12:58:29 +0000 (15:58 +0300)]
devlink: Delete not-used single parameter notification APIs
There is no need in specific devlink_param_*publish(), because same
output can be achieved by using devlink_params_*publish() in correct
places.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Tue, 14 Sep 2021 12:58:28 +0000 (15:58 +0300)]
net/mlx5: Publish and unpublish all devlink parameters at once
The devlink parameters were published in two steps despite being static
and known in advance.
First step was to use devlink_params_publish() which iterated over all
known up to that point parameters and sent notification messages.
In second step, the call was devlink_param_publish() that looped over
same parameters list and sent notification for new parameters.
In order to simplify the API, move devlink_params_publish() to be called
when all parameters were already added and save the need to iterate over
parameters list again.
As a side effect, this change fixes the error unwind flow in which
parameters were not marked as unpublished.
Fixes:
82e6c96f04e1 ("net/mlx5: Register to devlink ingress VLAN filter trap")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Sep 2021 14:46:02 +0000 (15:46 +0100)]
Merge branch 'qdisc-visibility'
Jakub Kicinski says:
====================
net: sched: update default qdisc visibility after Tx queue cnt changes
Matthew noticed that number of children reported by mq does not match
number of queues on reconfigured interfaces. For example if mq is
instantiated when there is 8 queues it will always show 8 children,
regardless of config being changed:
# ethtool -L eth0 combined 8
# tc qdisc replace dev eth0 root handle 100: mq
# tc qdisc show dev eth0
qdisc mq 100: root
qdisc pfifo_fast 0: parent 100:8 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:7 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:6 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:5 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:4 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:3 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:2 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:1 bands 3 priomap 1 2 ...
# ethtool -L eth0 combined 1
# tc qdisc show dev eth0
qdisc mq 100: root
qdisc pfifo_fast 0: parent 100:8 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:7 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:6 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:5 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:4 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:3 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:2 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:1 bands 3 priomap 1 2 ...
# ethtool -L eth0 combined 32
# tc qdisc show dev eth0
qdisc mq 100: root
qdisc pfifo_fast 0: parent 100:8 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:7 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:6 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:5 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:4 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:3 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:2 bands 3 priomap 1 2 ...
qdisc pfifo_fast 0: parent 100:1 bands 3 priomap 1 2 ...
This patchset fixes this by hashing and unhasing the default
child qdiscs as number of queues gets adjusted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 13 Sep 2021 22:53:32 +0000 (15:53 -0700)]
selftests: net: test ethtool -L vs mq
Add a selftest for checking mq children are visible after ethtool -L.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 13 Sep 2021 22:53:31 +0000 (15:53 -0700)]
netdevsim: add ability to change channel count
For testing visibility of mq/mqprio default children.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 13 Sep 2021 22:53:30 +0000 (15:53 -0700)]
net: sched: update default qdisc visibility after Tx queue cnt changes
mq / mqprio make the default child qdiscs visible. They only do
so for the qdiscs which are within real_num_tx_queues when the
device is registered. Depending on order of calls in the driver,
or if user space changes config via ethtool -L the number of
qdiscs visible under tc qdisc show will differ from the number
of queues. This is confusing to users and potentially to system
configuration scripts which try to make sure qdiscs have the
right parameters.
Add a new Qdisc_ops callback and make relevant qdiscs TTRT.
Note that this uncovers the "shortcut" created by
commit
1f27cde313d7 ("net: sched: use pfifo_fast for non real queues")
The default child qdiscs beyond initial real_num_tx are always
pfifo_fast, no matter what the sysfs setting is. Fixing this
gets a little tricky because we'd need to keep a reference
on whatever the default qdisc was at the time of creation.
In practice this is likely an non-issue the qdiscs likely have
to be configured to non-default settings, so whatever user space
is doing such configuration can replace the pfifos... now that
it will see them.
Reported-by: Matthew Massey <matthewmassey@fb.com>
Reviewed-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Sep 2021 10:12:24 +0000 (11:12 +0100)]
Merge branch 'ibmvnic-next'
Sukadev Bhattiprolu says:
====================
ibmvnic: Reuse ltb, rx, tx pools
It can take a long time to free and reallocate rx and tx pools and long
term buffer (LTB) during each reset of the VNIC. This is specially true
when the partition (LPAR) is heavily loaded and going through a Logical
Partition Migration (LPM). The long drawn reset causes the LPAR to lose
connectivity for extended periods of time and results in "RMC connection"
errors and the LPM failing.
What is worse is that during the LPM we could get a failover because
of the lost connectivity. At that point, the vnic driver releases
even the resources it has already allocated and starts over.
As long as the resources we have already allocated are valid/applicable,
we might as well hold on to them while trying to allocate the remaining
resources. This patch set attempts to reuse the resources previously
allocated as long as they are valid. It seems to vastly improve the
time taken for the vnic reset and signficantly reduces the chances of
getting the RMC connection errors. We do get still them occasionally,
but appears to be for reasons other than memory allocation delays and
those are still being investigated.
If the backing devices for a vnic adapter are not "matched" (see "pool
parameters" in patches 8 and 9) it is possible that we will still free
all the resources and allocate them. If that becomes a common problem,
we have to address it separately.
Thanks to input and extensive testing from Brian King, Cris Forno,
Dany Madden, Rick Lindsley.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 15 Sep 2021 03:52:59 +0000 (20:52 -0700)]
ibmvnic: Reuse tx pools when possible
Rather than releasing the tx pools on every close and reallocating
them on open, reuse the tx pools unless the pool parameters (number
of pools, size of each pool or size of each buffer in a pool) have
changed.
If the pool parameters changed, then release the old pools (if
any) and allocate new ones.
Specifically release tx pools, if:
- adapter is removed,
- pool parameters change during reset,
- we encounter an error when opening the adapter in response
to a user request (in ibmvnic_open()).
and don't release them:
- in __ibmvnic_close() or
- on errors in __ibmvnic_open()
in the hope that we can reuse them during this or next reset.
With these changes reset_tx_pools() can be dropped because its
optimization is now included in init_tx_pools() itself.
cleanup_tx_pools() releases all the skbs associated with the pool and
is called from ibmvnic_cleanup(), which is called on every reset. Since
we want to reuse skbs across resets, move cleanup_tx_pools() out of
ibmvnic_cleanup() and call it only when user closes the adapter.
Add two new adapter fields, ->prev_mtu, ->prev_tx_pool_size to track the
previous values and use them to decide whether to reuse or realloc the
pools.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 15 Sep 2021 03:52:58 +0000 (20:52 -0700)]
ibmvnic: Reuse rx pools when possible
Rather than releasing the rx pools on and reallocating them on every
reset, reuse the rx pools unless the pool parameters (number of pools,
size of each pool or size of each buffer in a pool) have changed.
If the pool parameters changed, then release the old pools (if any)
and allocate new ones.
Specifically release rx pools, if:
- adapter is removed,
- pool parameters change during reset,
- we encounter an error when opening the adapter in response
to a user request (in ibmvnic_open()).
and don't release them:
- in __ibmvnic_close() or
- on errors in __ibmvnic_open()
in the hope that we can reuse them on the next reset.
With these, reset_rx_pools() can be dropped because its optimzation is
now included in init_rx_pools() itself.
cleanup_rx_pools() releases all the skbs associated with the pool and
is called from ibmvnic_cleanup(), which is called on every reset. Since
we want to reuse skbs across resets, move cleanup_rx_pools() out of
ibmvnic_cleanup() and call it only when user closes the adapter.
Add two new adapter fields, ->prev_rx_buf_sz, ->prev_rx_pool_size to
keep track of the previous values and use them to decide whether to
reuse or realloc the pools.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 15 Sep 2021 03:52:57 +0000 (20:52 -0700)]
ibmvnic: Reuse LTB when possible
Reuse the long term buffer during a reset as long as its size has
not changed. If the size has changed, free it and allocate a new
one of the appropriate size.
When we do this, alloc_long_term_buff() and reset_long_term_buff()
become identical. Drop reset_long_term_buff().
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 15 Sep 2021 03:52:56 +0000 (20:52 -0700)]
ibmvnic: Use bitmap for LTB map_ids
In a follow-on patch, we will reuse long term buffers when possible.
When doing so we have to be careful to properly assign map ids. We
can no longer assign them sequentially because a lower map id may be
available and we could wrap at 255 and collide with an in-use map id.
Instead, use a bitmap to track active map ids and to find a free map id.
Don't need to take locks here since the map_id only changes during reset
and at that time only the reset worker thread should be using the adapter.
Noticed this when analyzing an error Dany Madden ran into with the
patch set.
Reported-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 15 Sep 2021 03:52:55 +0000 (20:52 -0700)]
ibmvnic: init_tx_pools move loop-invariant code
In init_tx_pools() move some loop-invariant code out of the loop.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 15 Sep 2021 03:52:54 +0000 (20:52 -0700)]
ibmvnic: Use/rename local vars in init_tx_pools
Use/rename local variables in init_tx_pools() for consistency with
init_rx_pools() and for readability. Also add some comments
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 15 Sep 2021 03:52:53 +0000 (20:52 -0700)]
ibmvnic: Use/rename local vars in init_rx_pools
To make the code more readable, use/rename some local variables.
Basically we have a set of pools, num_pools. Each pool has a set of
buffers, pool_size and each buffer is of size buff_size.
pool_size is a bit ambiguous (whether size in bytes or buffers). Add
a comment in the header file to make it explicit.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 15 Sep 2021 03:52:52 +0000 (20:52 -0700)]
ibmvnic: Fix up some comments and messages
Add/update some comments/function headers and fix up some messages.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 15 Sep 2021 03:52:51 +0000 (20:52 -0700)]
ibmvnic: Consolidate code in replenish_rx_pool()
For better readability, consolidate related code in replenish_rx_pool()
and add some comments.
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Sep 2021 10:10:01 +0000 (11:10 +0100)]
Merge branch 'ptp-ocp-timecard-v13-fw'
Jonathan Lemon says:
====================
timecard updates for v13 firmware
This update mainly deals with features for the TimeCard v13 firmware.
The signals provided from the external SMA connectors can be steered
to different locations, and the generated SMA signals can be chosen.
Future timecard revisions will allow selectable I/O on any of the
SMA connectors, so name the attributes appropriately, and set up
the ABI in preparation for the new features.
The update also adds support for IRIG-B and DCF formats, as well
as NMEA output.
A ts_window_adjust tunable is also provided to fine-tune the
PHC:SYS time mapping.
--
v1: Earlier reviewed series was for v10 firmware, this is expanded to
include the v13 features.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:36 +0000 (19:16 -0700)]
docs: ABI: Add sysfs documentation for timecard
This patch describes the sysfs interface implemented by the
ptp_ocp driver, under /sys/class/timecard.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:35 +0000 (19:16 -0700)]
ptp: ocp: Add timestamp window adjustment
The following process is used to read the PHC clock and correlate
the reading with the "correct" system time.
- get starting timestamp
- issue PCI write command
- issue PCI read command
- get ending timestamp
- read latched sec/nsec registers
The write command is posted to PCI bus and returns. When the write
arrives at the FPGA, the PHC time is latched into the sec/nsec registers,
and a flag is set indicating the registers are valid. The read command
returns this flag, and the time retrieval proceeds.
Below is a non-scaled picture of the timing diagram involved. The
PHC time corresponds to some SYS time between [start, end]. Userspace
usually uses the midpoint between [start, end] to estimate the PCI
delay and match this with the PHC time.
[start] | |
write |-------+ |
| \ |
read |----+ +----->|
| \ * PHC time latched into register
| \ |
midpoint | +------->|
| |
| |
| +----|
| / |
|<--------+ |
[end] | |
As the diagram indicates, the PHC time is latched before the midpoint,
so the system clock time is slightly off the real PHC time. This shows
up as a phase error with an oscilliscope.
The workaround here is to provide a tunable which reduces (shrinks)
the end time in the above diagram. This in turn moves the calculated
midpoint so the system time and PHC time are in agreemment.
Currently, the adjustment reduces the end time by 3/16th of the entire
window. E.g.: [start, end] ==> [start, (end - (3/16 * end)], which
produces reasonably good results.
Also reduce delays by just writing to the clock control register
instead of performing a read/modify/write sequence, as the contents
of the control register are known.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:34 +0000 (19:16 -0700)]
ptp: ocp: Have FPGA fold in ns adjustment for adjtime.
The current implementation of adjtime uses gettime/settime to
perform nanosecond adjustments. This introduces addtional phase
errors due to delays.
Instead, use the FPGA's ability to just apply the nanosecond
adjustment to the clock directly.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:33 +0000 (19:16 -0700)]
ptp: ocp: Enable 4th timestamper / PPS generator
A 4th timestamper is added which timestamps the output of the PHC.
The clock nanosecond offset is not always zero, so when compared
to other timestampers, this provides precise measurements.
Also, the timestamper interrupt from the PHC can be used to generate
a PPS signal for /dev/pps.
Also allow PTP_CLK_REQ_PEROUT requests for a 1PPS output, but do
not actually configure any output pins, this is done via sysfs.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:32 +0000 (19:16 -0700)]
ptp: ocp: Add second GNSS device
Upcoming boards may have a second GNSS receiver, getting information
from a different constellation than the first receiver, which provides
some measure of anti-spoofing.
Expose the sysfs attribute for this device, if detected.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:31 +0000 (19:16 -0700)]
ptp: ocp: Add NMEA output
The timecard can provide a NMEA-1083 ZDA (time and date) output
string on a serial port, which can be used to drive other devices.
Add the NMEA resources, and the serial port as a sysfs attribute.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:30 +0000 (19:16 -0700)]
ptp: ocp: Add debugfs entry for timecard
Provide a view into the timecard internals for debugging.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:29 +0000 (19:16 -0700)]
ptp: ocp: Separate the init and info logic
On startup, parts of the FPGA need to be initialized - break these
out into their own functions, separate from the purely informational
blocks.
On startup, distrbute the UTC:TAI offset from the NMEA GNSS parser,
if it is available.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:28 +0000 (19:16 -0700)]
ptp: ocp: Add sysfs attribute utc_tai_offset
IRIG and DCF output time in UTC, but the timecard operates
on TAI internally. Add an attribute node which allows adding
an offset to these modes before output.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:27 +0000 (19:16 -0700)]
ptp: ocp: Add IRIG-B output mode control
IRIG-B has several different output formats, the timecard defaults
to using B007. Add a control which selects different output modes.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:26 +0000 (19:16 -0700)]
ptp: ocp: Add IRIG-B and DCF blocks
IRIG (Inter-range Instrumentation Group) timecode format on
one of the SMA output channels is provided by the IRIG master
FPGA block. Enable the master when the IRIG output format is
selected on either one of the output channels.
By default, the output is in B007 format.
DCF output format is provided by the DCF master block.
Also enable the IRIG and DCF slaves, which parse an incoming
signal from the external SMA connectors, and may be used to
adjust the PHC.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:25 +0000 (19:16 -0700)]
ptp: ocp: Add SMA selector and controls
The latest firmware for the TimeCard adds selectable signals for
the SMA input/outputs. Add support for SMA selectors, and the
GPIO controls needed for steering signals.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:24 +0000 (19:16 -0700)]
ptp: ocp: Add third timestamper
The firmware may provide a third signal timestamper, so make it
available for use.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:23 +0000 (19:16 -0700)]
ptp: ocp: Report error if resource registration fails.
If a resource could not be registered, report the name of
the resource and the error code.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:22 +0000 (19:16 -0700)]
ptp: ocp: Skip resources with out of range irqs
The TimeCard exposes different resources, which may have their
own irqs. Space for the irqs is allocated through a MSI or MSI-X
interrupt vector. On some platforms, the interrupt allocation
fails.
Rather than making this fatal, just skip exposing those resources.
The main timecard functionality (that of a PTP clock) will work
without the additional resources.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:21 +0000 (19:16 -0700)]
ptp: ocp: Skip I2C flash read when there is no controller.
If an I2C controller isn't present, don't try and read the I2C flash.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:20 +0000 (19:16 -0700)]
ptp: ocp: Parameterize the TOD information display.
Only display the TOD information if there is a corresponding
TOD resource.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Wed, 15 Sep 2021 02:16:19 +0000 (19:16 -0700)]
ptp: ocp: parameterize the i2c driver used
Move the xilinx i2c driver parameters to the resource block instead
of hardcoding things in the registration functions.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Jan Bajkowski [Tue, 14 Sep 2021 21:21:05 +0000 (23:21 +0200)]
dt-bindings: net: lantiq: Add the burst length properties
The new added properties are used for configuring burst length.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Jan Bajkowski [Tue, 14 Sep 2021 21:21:04 +0000 (23:21 +0200)]
dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings
Document the Lantiq Xway SoC series External Bus Unit (ETOP) bindings.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Jan Bajkowski [Tue, 14 Sep 2021 21:21:03 +0000 (23:21 +0200)]
dt-bindings: net: lantiq-xrx200-net: convert to the json-schema
Convert the Lantiq PMAC Device Tree binding documentation to json-schema.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Jan Bajkowski [Tue, 14 Sep 2021 21:21:02 +0000 (23:21 +0200)]
net: lantiq: configure the burst length in ethernet drivers
Configure the burst length in Ethernet drivers. This improves
Ethernet performance by 58%. According to the vendor BSP,
8W burst length is supported by ar9 and newer SoCs.
The NAT benchmark results on xRX200 (Down/Up):
* 2W: 330 Mb/s
* 4W: 432 Mb/s 372 Mb/s
* 8W: 520 Mb/s 389 Mb/s
Tested on xRX200 and xRX330.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>