bridge: fix switched interval for MLD Query types

[ Upstream commit 32de868cbc6bee010d2cee95b5071b25ecbec8c3 ]

General Queries (the one with the Multicast Address field
set to zero / '::') are supposed to have a Maximum Response Delay
of [Query Response Interval], while for Multicast-Address-Specific
Queries it is [Last Listener Query Interval] - not the other way
round. (see RFC2710, section 7.3+7.8)

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: tsb must be flushed before tlb

Upstream commit 23a01138efe216f8084cfaa74b0b90dd4b097441

This fixes a race where a cpu may re-load a tlb from a stale tsb right
after it has been flushed by a remote function call.

I still see some instability when stressing the system with parallel
kernel builds while creating memory pressure by writing to
/proc/sys/vm/nr_hugepages, but this patch improves the stability
significantly.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64 address-congruence property

Upstream commit 771a37ff4d80b80db3b0df3e7696f14b298c67b7

The Machine Description (MD) property "address-congruence-offset" is
optional. According to the MD specification the value is assumed 0UL when
not present. This caused early boot failure on T5.

Signed-off-by: Bob Picco <bob.picco@oracle.com>
CC: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc32: vm_area_struct access for old Sun SPARCs.

Upstream commit 961246b4ed8da3bcf4ee1eb9147f341013553e3c

Commit e4c6bfd2d79d063017ab19a18915f0bc759f32d9 ("mm: rearrange
vm_area_struct for fewer cache misses") changed the layout of the
vm_area_struct structure, it broke several SPARC32 assembly routines
which used numerical constants for accessing the vm_mm field.

This patch defines the VMA_VM_MM constant to replace the immediate values.

Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix perf_lock_task_context() vs RCU

commit 058ebd0eba3aff16b144eabf4510ed9510e1416e upstream.

Jiri managed to trigger this warning:

 [] ======================================================
 [] [ INFO: possible circular locking dependency detected ]
 [] 3.10.0+ #228 Tainted: G        W
 [] -------------------------------------------------------
 [] p/6613 is trying to acquire lock:
 []  (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250
 []
 [] but task is already holding lock:
 []  (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0
 []
 [] which lock already depends on the new lock.
 []
 [] the existing dependency chain (in reverse order) is:
 []
 [] -> #4 (&ctx->lock){-.-...}:
 [] -> #3 (&rq->lock){-.-.-.}:
 [] -> #2 (&p->pi_lock){-.-.-.}:
 [] -> #1 (&rnp->nocb_gp_wq[1]){......}:
 [] -> #0 (rcu_node_0){..-...}:

Paul was quick to explain that due to preemptible RCU we cannot call
rcu_read_unlock() while holding scheduler (or nested) locks when part
of the read side critical section was preemptible.

Therefore solve it by making the entire RCU read side non-preemptible.

Also pull out the retry from under the non-preempt to play nice with RT.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Helped-out-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario

commit 06f417968beac6e6b614e17b37d347aa6a6b1d30 upstream.

The '!ctx->is_active' check has a valid scenario, so
there's no need for the warning.

The reason is that there's a time window between the
'ctx->is_active' check in the perf_event_enable() function
and the __perf_event_enable() function having:

  - IRQs on
  - ctx->lock unlocked

where the task could be killed and 'ctx' deactivated by
perf_event_exit_task(), ending up with the warning below.

So remove the WARN_ON_ONCE() check and add comments to
explain it all.

This addresses the following warning reported by Vince Weaver:

[  324.983534] ------------[ cut here ]------------
[  324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190()
[  324.984420] Modules linked in:
[  324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246
[  324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010
[  324.984420]  0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00
[  324.984420]  ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860
[  324.984420]  0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a
[  324.984420] Call Trace:
[  324.984420]  <IRQ>  [<ffffffff8160ea0b>] dump_stack+0x19/0x1b
[  324.984420]  [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0
[  324.984420]  [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20
[  324.984420]  [<ffffffff81134437>] __perf_event_enable+0x187/0x190
[  324.984420]  [<ffffffff81130030>] remote_function+0x40/0x50
[  324.984420]  [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130
[  324.984420]  [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40
[  324.984420]  [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80
[  324.984420]  <EOI>  [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70
[  324.984420]  [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210
[  324.984420]  [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60
[  324.984420]  [<ffffffff81086946>] do_exit+0x2b6/0xa40
[  324.984420]  [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30
[  324.984420]  [<ffffffff81087279>] do_group_exit+0x49/0xc0
[  324.984420]  [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620
[  324.984420]  [<ffffffff81043057>] do_signal+0x57/0x5a0
[  324.984420]  [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0
[  324.984420]  [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe
[  324.984420]  [<ffffffff816166cd>] ? retint_signal+0x11/0x84
[  324.984420]  [<ffffffff81043605>] do_notify_resume+0x65/0x80
[  324.984420]  [<ffffffff81616702>] retint_signal+0x46/0x84
[  324.984420] ---[ end trace 442ec2f04db3771a ]---

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373384651-6109-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Clone child context from parent context pmu

commit 734df5ab549ca44f40de0f07af1c8803856dfb18 upstream.

Currently when the child context for inherited events is
created, it's based on the pmu object of the first event
of the parent context.

This is wrong for the following scenario:

  - HW context having HW and SW event
  - HW event got removed (closed)
  - SW event stays in HW context as the only event
    and its pmu is used to clone the child context

The issue starts when the cpu context object is touched
based on the pmu context object (__get_cpu_context). In
this case the HW context will work with SW cpu context
ending up with following WARN below.

Fixing this by using parent context pmu object to clone
from child context.

Addresses the following warning reported by Vince Weaver:

[ 2716.472065] ------------[ cut here ]------------
[ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x)
[ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn
[ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2
[ 2716.476035] Hardware name: AOpen   DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2
[ 2716.476035]  0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18
[ 2716.476035]  ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad
[ 2716.476035]  ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550
[ 2716.476035] Call Trace:
[ 2716.476035]  [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70
[ 2716.476035]  [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f
[ 2716.476035]  [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194
[ 2716.476035]  [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c
[ 2716.476035]  [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394
[ 2716.476035]  [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98
[ 2716.476035]  [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad
[ 2716.476035]  [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1
[ 2716.476035]  [<ffffffff8100205d>] ? do_signal+0x3c/0x432
[ 2716.476035]  [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141
[ 2716.476035]  [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90
[ 2716.476035]  [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118
[ 2716.476035]  [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c
[ 2716.476035]  [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6
[ 2716.476035]  [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d
[ 2716.476035]  [<ffffffff813654f5>] ? retint_signal+0x3d/0x78
[ 2716.476035] ---[ end trace 827178d8a5966c3d ]---

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373384651-6109-1-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Only unmap large pages from the first pte

commit 60d0ca3cfd199b6612bbbbf4999a3470dad38bb1 upstream.

If we use a large mapping, the expectation is that only unmaps from
the first pte in the superpage are supported.  Unmaps from offsets
into the superpage should fail (ie. return zero sized unmap).  In the
current code, unmapping from an offset clears the size of the full
mapping starting from an offset.  For instance, if we map a 16k
physically contiguous range at IOVA 0x0 with a large page, then
attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and
the unmap returns 16k unmapped.  This potentially incorrectly clears
valid mappings and confuses drivers like VFIO that use the unmap size
to release pinned pages.

Fix by refusing to unmap from offsets into the page.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Use current_uid() for critical time tracing

commit f17a5194859a82afe4164e938b92035b86c55794 upstream.

The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.

When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.

During testing, this RCU lockdep dump appeared:

[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G        W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021]  #0:  (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G        W    3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021]  0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021]  ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021]  ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021]  [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021]  [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021]  [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021]  [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021]  [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021]  [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021]  [<ffffffff8154bdca>] int_signal+0x12/0x17

What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.

The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).

As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.

This fixes the RCU suspicious splat.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: mpt2sas: fix firmware failure with wrong task attribute

commit 48ba2efc382f94fae16ca8ca011e5961a81ad1ea upstream.

When SCSI command is received with task attribute not set, set it to SIMPLE.
Previously it is set to untagged. This causes the firmware to fail the commands.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down

commit f76ccaac4f82c463a037aa4a1e4ccb85c7011814 upstream.

FCP device remains in status ERP_FAILED when device is switched online
or adapter recovery is triggered  while link to SAN is down.

When Exchange Configuration Data command returns the FSF status
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process.
The only retries are done during the common error recovery procedure
(i.e. max. 3 retries with 8sec sleep between) and remains in status
ERP_FAILED with QDIO down.

This commit reverts the commit 0df138476c8306478d6e726f044868b4bccf411c
(zfcp: Fix adapter activation on link down).
When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the
adapter recovery will be finished without any retries. QDIO will be
up now and status changes such as LINK UP will be received now.

Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Do not assign noise for NULL caldata

commit d3bcb7b24bbf09fde8405770e676fe0c11c79662 upstream.

ah->noise is maintained globally and not per-channel. This
is updated in the reset() routine after the NF history has been
filled for the *current channel*, just before switching to
the new channel. There is no need to do it inside getnf(), since
ah->noise must contain a value for the new channel.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: read 5GHz TX power values from the correct offset

commit 0a6f3a8ebaf13407523c2c7d575b4ca2debd23ba upstream.

The current code uses the same index value both
for the channel information array and for the TX
power table. The index starts from 14, however the
index of the TX power table must start from zero.

Fix it, in order to get the correct TX power value
for a given channel.

The changes in rt61pci.c and rt73usb.c are compile
tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tick: Prevent uncontrolled switch to oneshot mode

commit 1f73a9806bdd07a5106409bbcab3884078bd34fe upstream.

When the system switches from periodic to oneshot mode, the broadcast
logic causes a possibility that a CPU which has not yet switched to
oneshot mode puts its own clock event device into oneshot mode without
updating the state and the timer handler.

CPU0 CPU1
per cpu tickdev is in periodic mode
and switched to broadcast

Switch to oneshot mode
 tick_broadcast_switch_to_oneshot()
  cpumask_copy(tick_oneshot_broacast_mask,
       tick_broadcast_mask);

  broadcast device mode = oneshot

Timer interrupt

irq_enter()
 tick_check_oneshot_broadcast()
  dev->set_mode(ONESHOT);

tick_handle_periodic()
 if (dev->mode == ONESHOT)
   dev->next_event += period;
   FAIL.

We fail, because dev->next_event contains KTIME_MAX, if the device was
in periodic mode before the uncontrolled switch to oneshot happened.

We must copy the broadcast bits over to the oneshot mask, because
otherwise a CPU which relies on the broadcast would not been woken up
anymore after the broadcast device switched to oneshot mode.

So we need to verify in tick_check_oneshot_broadcast() whether the CPU
has already switched to oneshot mode. If not, leave the device
untouched and let the CPU switch controlled into oneshot mode.

This is a long standing bug, which was never noticed, because the main
user of the broadcast x86 cannot run into that scenario, AFAICT. The
nonarchitected timer mess of ARM creates a gazillion of differently
broken abominations which trigger the shortcomings of that broadcast
code, which better had never been necessary in the first place.

Reported-and-tested-by: Stehle Vincent-B46079 <B46079@freescale.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>,
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307012153060.4013@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK

commit 5c78dfe87ea04b501ee000a7f03b9432ac9d008c upstream.

SGTL5000_PLL_FRAC_DIV_MASK is used to mask bits 0-10 (11 bits in total) of
register CHIP_PLL_CTRL, so fix the mask to accomodate all this bit range.

Reported-by: Oskar Schirmer <oskar@scara.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs

commit c7e8695bfa0611b39493a9dfe8bab9f63f9809bd upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: skip SRST for all SIMG [34]7x port-multipliers

commit 7a87718d92760fc688628ad6a430643dafa16f1f upstream.

For some reason, a lot of port-multipliers have issues with softreset.
SIMG [34]7x series port-multipliers have been quite erratic in this
regard.  I recall that it was better with some firmware revisions and
the current list of quirks worked fine for a while.  I think it got
worse with later firmwares or maybe my test coverage wasn't good
enough.  Anyways, HPA is reporting that his 3726 setup suffers SRST
failures and then the PMP gets confused and fails to probe the last
port.

The hope was that we try to stick to the standard as much as possible
and soonish the PMPs and their firmwares will improve in quality, so
the quirk list was kept to minimum.  Well, it seems like that's never
gonna happen.

Let's set NO_SRST for all [34]7x PMPs so that whatever remaining
userbase of the device suffer the least.  Maybe we should do the same
for 57xx's but unfortunately I don't have any device left to test and
I'm not even sure 57xx's have ever been made widely available, so
let's leave those alone for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext3: fix data=journal fast mount/umount hang

commit e643692138cfa33528f054b071ba2583509bb217 upstream.

In data=journal mode, if we unmount the file system before a
transaction has a chance to complete, when the journal inode is being
evicted, we can end up calling into log_wait_commit() for the
last transaction, after the journalling machinery has been shut down.
That triggers the WARN_ONCE in __log_start_commit().

Arguably we should adjust ext3_should_journal_data() to return FALSE
for the journal inode, but the only place it matters is
ext3_evict_inode(), and so it's to save a bit of CPU time, and to make
the patch much more obviously correct by inspection(tm), we'll fix it
by explicitly not trying to waiting for a journal commit when we are
evicting the journal inode, since it's guaranteed to never succeed in
this case.

This can be easily replicated via:

     mount -t ext3 -o data=journal /dev/vdb /vdb ; umount /vdb

This is a port of ext4 fix from Ted Ts'o.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.54

Handle big endianness in NTLM (ntlmv2) authentication

commit fdf96a907c1fbb93c633e2b7ede3b8df26d6a4c0 upstream.

This is RH bug 970891
Uppercasing of username during calculation of ntlmv2 hash fails
because UniStrupr function does not handle big endian wchars.

Also fix a comment in the same code to reflect its correct usage.

[To make it easier for stable (rather than require 2nd patch) fixed
this patch of Shirish's to remove endian warning generated
by sparse -- steve f.]

Reported-by: steve <sanpatr1@in.ibm.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/dma/pl330.c: fix locking in pl330_free_chan_resources()

commit da331ba8e9c5de72a27e50f71105395bba6eebe0 upstream.

tasklet_kill() may sleep so call it before taking pch->lock.

Fixes following lockup:

  BUG: scheduling while atomic: cat/2383/0x00000002
  Modules linked in:
    unwind_backtrace+0x0/0xfc
    __schedule_bug+0x4c/0x58
    __schedule+0x690/0x6e0
    sys_sched_yield+0x70/0x78
    tasklet_kill+0x34/0x8c
    pl330_free_chan_resources+0x24/0x88
    dma_chan_put+0x4c/0x50
  [...]
  BUG: spinlock lockup suspected on CPU#0, swapper/0/0
   lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1
    unwind_backtrace+0x0/0xfc
    do_raw_spin_lock+0x194/0x204
    _raw_spin_lock_irqsave+0x20/0x28
    pl330_tasklet+0x2c/0x5a8
    tasklet_action+0xfc/0x114
    __do_softirq+0xe4/0x19c
    irq_exit+0x98/0x9c
    handle_IPI+0x124/0x16c
    gic_handle_irq+0x64/0x68
    __irq_svc+0x40/0x70
    cpuidle_wrap_enter+0x4c/0xa0
    cpuidle_enter_state+0x18/0x68
    cpuidle_idle_call+0xac/0xe0
    cpu_idle+0xac/0xf0

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7765/1: perf: Record the user-mode PC in the call chain.

commit c5f927a6f62196226915f12194c9d0df4e2210d7 upstream.

With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip.

It's possible to partially work around this problem by post-processing
the data to use the PERF_SAMPLE_IP value, but this works only if the CPU
wasn't in the kernel when the sample was taken.

Signed-off-by: Jed Davis <jld@mozilla.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't allow ext4_free_blocks() to fail due to ENOMEM

commit e7676a704ee0a1ef71a6b23760b5a8f6896cb1a1 upstream.

The filesystem should not be marked inconsistent if ext4_free_blocks()
is not able to allocate memory.  Unfortunately some callers (most
notably ext4_truncate) don't have a way to reflect an error back up to
the VFS.  And even if we did, most userspace applications won't deal
with most system calls returning ENOMEM anyway.

Reported-by: Nagachandra P <nagachandra@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix overflow when counting used blocks on 32-bit architectures

commit 8af8eecc1331dbf5e8c662022272cf667e213da5 upstream.

The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archs

commit a60697f411eb365fb09e639e6f183fe33d1eb796 upstream.

On 32-bit architectures with 32-bit sector_t computation of data offset
in ext4_xattr_fiemap() can overflow resulting in reporting bogus data
location. Fix the problem by typing block number to proper type before
shifting.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timer: Fix jiffies wrap behavior of round_jiffies_common()

commit 9e04d3804d3ac97d8c03a41d78d0f0674b5d01e1 upstream.

Direct compare of jiffies related values does not work in the wrap
around case. Replace it with time_is_after_jiffies().

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/519BC066.5080600@acm.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: remove pmp link online check in FBS EH

commit 912b9ac683b112615d5605686f1dc086402ce9f7 upstream.

ata_link_online() check in ahci_error_intr() is unnecessary, it should
be removed otherwise may lead to lockup with FBS enabled PMP.
http://marc.info/?l=linux-ide&m=137050421603272&w=2

Reported-by: Yu Liu <liuyu.ac@gmail.com>
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: Add AMD CZ SATA device ID

commit fafe5c3d82a470d73de53e6b08eb4e28d974d895 upstream.

To add AMD CZ SATA controller device ID of IDE mode.

[bhelgaas: drop pci_ids.h update]
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: xattr: fix inlined xattr reflink

commit ef962df057aaafd714f5c22ba3de1be459571fdf upstream.

Inlined xattr shared free space of inode block with inlined data or data
extent record, so the size of the later two should be adjusted when
inlined xattr is enabled.  See ocfs2_xattr_ibody_init().  But this isn't
done well when reflink.  For inode with inlined data, its max inlined
data size is adjusted in ocfs2_duplicate_inline_data(), no problem.  But
for inode with data extent record, its record count isn't adjusted.  Fix
it, or data extent record and inlined xattr may overwrite each other,
then cause data corruption or xattr failure.

One panic caused by this bug in our test environment is the following:

  kernel BUG at fs/ocfs2/xattr.c:1435!
  invalid opcode: 0000 [#1] SMP
  Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1
  RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2]
  RSP: e02b:ffff88007a587948  EFLAGS: 00010283
  RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4
  RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68
  RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010
  R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68
  FS:  00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
  CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process multi_reflink_t
  Call Trace:
    ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2]
    ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2]
    ocfs2_xa_set+0xcc/0x250 [ocfs2]
    ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2]
    __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2]
    ocfs2_xattr_set+0x6c6/0x890 [ocfs2]
    ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
    generic_setxattr+0x70/0x90
    __vfs_setxattr_noperm+0x80/0x1a0
    vfs_setxattr+0xa9/0xb0
    setxattr+0xc3/0x120
    sys_fsetxattr+0xa8/0xd0
    system_call_fastpath+0x16/0x1b

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan

commit eff9a4b62b14cf0d9913e3caf1f26f8b7a6105c9 upstream.

HP Folio 13's BIOS defines CMOS RTC Operation Region and the EC's
_REG method will access that region.  To allow the CMOS RTC region
handler to be installed before the EC _REG method is first invoked,
add ec_skip_dsdt_scan() as HP Folio 13's callback to ec_dmi_table.

References: https://bugzilla.kernel.org/show_bug.cgi?id=54621
Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/rtc/rtc-rv3029c2.c: fix disabling AIE irq

commit 29ecd78c0fd6ee05f2c6b07b23823a6ae43c13ff upstream.

In the disable AIE irq code path, current code passes "1" to enable
parameter of rv3029c2_rtc_i2c_alarm_set_irq().  Thus it does not disable
AIE irq.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Fix can_request_irq() for IRQs without an action

commit 2779db8d37d4b542d9ca2575f5f178dbeaca6c86 upstream.

Commit 02725e7471b8 ('genirq: Use irq_get/put functions'),
inadvertently changed can_request_irq() to return 0 for IRQs that have
no action.  This causes pcibios_lookup_irq() to select only IRQs that
already have an action with IRQF_SHARED set, or to fail if there are
none.  Change can_request_irq() to return 1 for IRQs that have no
action (if the first two conditions are met).

Reported-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Tested-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is> (against 3.2)
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: 709647@bugs.debian.org
Link: http://bugs.debian.org/709647
Link: http://lkml.kernel.org/r/1372383630.23847.40.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/time: remove blocked time accounting from xen "clockchip"

commit 0b0c002c340e78173789f8afaa508070d838cf3d upstream.

... because the "clock_event_device framework" already accounts for idle
time through the "event_handler" function pointer in
xen_timer_interrupt().

The patch is intended as the completion of [1]. It should fix the double
idle times seen in PV guests' /proc/stat [2]. It should be orthogonal to
stolen time accounting (the removed code seems to be isolated).

The approach may be completely misguided.

[1] https://lkml.org/lkml/2011/10/6/10
[2] http://lists.xensource.com/archives/html/xen-devel/2010-08/msg01068.html

John took the time to retest this patch on top of v3.10 and reported:
"idle time is correctly incremented for pv and hvm for the normal
case, nohz=off and nohz=idle." so lets put this patch in.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: John Haxby <john.haxby@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pcmcia: at91_cf: fix gpio_get_value in at91_cf_get_status

commit e39506b466edcda2a7e9d0174d7987ae654137b7 upstream.

Commit 80af9e6d (pcmcia at91_cf: fix raw gpio number usage) forgot
to change the parameter in gpio_get_value after adding gpio
validation.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: release mem region while removing module

commit 5388a3a5faba8dfa69e5f06c3a415d373c1a4316 upstream.

Do a release_mem_region of the hcd resource. Without this the
subsequent insertion of module fails in request_mem_region.

Signed-off-by: George Cherian <george.cherian@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: check for failed dma pool allocation

commit 025f880cb2e4d7218d0422d4b07bea1a68959c38 upstream.

Fail and free the container context in case dma_pool_alloc() can't allocate
the raw context data part of it

This patch should be backported to kernels as old as 2.6.31, that
contain the commit d115b04818e57bdbc7ccde4d0660b15e33013dc8 "USB: xhci:
Support for 64-byte contexts".

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: John Youn <johnyoun@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_mass_storage: add missing memory barrier for thread_wakeup_needed

commit d68c277b501889b3a50c179d1c3d704db7947b83 upstream.

Without this memory barrier, the file-storage thread may fail to
escape from the following while loop, because it may observe new
common->thread_wakeup_needed and old bh->state which are updated by
the callback functions.

/* Wait for the CBW to arrive */
while (bh->state != BUF_STATE_FULL) {
rc = sleep_thread(common);
if (rc)
return rc;
}

Signed-off-by: UCHINO Satoshi <satoshi.uchino@toshiba.co.jp>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option,qcserial: move Novatel Gobi1K IDs to qcserial

commit a254810a86aaaac4ac6ba44fa934558b042a17a7 upstream.

These devices are all Gobi1K devices (according to the Windows INF
files) and should be handled by qcserial instead of option.  Their
network port is handled by qmi_wwan.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()

commit 64cb927371cd2ec43758d8a094a003d27bc3d0dc upstream.

Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir().  All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix theoretical race in jbd2__journal_restart

commit 39c04153fda8c32e85b51c96eb5511a326ad7609 upstream.

Once we decrement transaction->t_updates, if this is the last handle
holding the transaction from closing, and once we release the
t_handle_lock spinlock, it's possible for the transaction to commit
and be released.  In practice with normal kernels, this probably won't
happen, since the commit happens in a separate kernel thread and it's
unlikely this could all happen within the space of a few CPU cycles.

On the other hand, with a real-time kernel, this could potentially
happen, so save the tid found in transaction->t_tid before we release
t_handle_lock.  It would require an insane configuration, such as one
where the jbd2 thread was set to a very high real-time priority,
perhaps because a high priority real-time thread is trying to read or
write to a file system.  But some people who use real-time kernels
have been known to do insane things, including controlling
laser-wielding industrial robots.  :-)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Fix duplicate if test

commit 10d0b9030a3f86e1e26c710c7580524d7787d688 upstream.

A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the
same condition twice. The problem was found using cppcheck-1.49, and the
proper fix was verified against the pre-mac80211 version of the code.

This patch was originally included as commit 1288aa4, but was accidentally
reverted in a later patch.

Reported-by: David Binderman <dcb314@hotmail.com> [original report]
Reported-by: Andrea Morello <andrea.merello@gmail.com> [report of accidental reversion]
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND

commit c4d827c5ccc3a49227dbf9d4b248a2e86f388023 upstream.

This is a new device for this driver.

Reported-by: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS use sensible file nlink values if unprovided

commit 6658b9f70ebca5fc0795b1d6d733996af1e2caa7 upstream.

Certain servers may not set the NumberOfLinks field in query file/path
info responses. In such a case, cifs_inode_needs_reval() assumes that
all regular files are hardlinks and triggers revalidation, leading to
excessive and unnecessary network traffic.

This change hardcodes cf_nlink (and subsequently i_nlink) when not
returned by the server, similar to what already occurs in cifs_mkdir().

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.53

Revert "sched: Add missing call to calc_load_exit_idle()"

This reverts commit 48f0f14ffb6ff4852922994d11fbda418d40100e which was
commit 749c8814f08f12baa4a9c2812a7c6ede7d69507d upstream.

It seems to be misapplied, and not needed for 3.4-stable

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Charles Wang <muming.wq@taobao.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: sd: Fix parsing of 'temporary ' cache mode prefix

commit 2ee3e26c673e75c05ef8b914f54fadee3d7b9c88 upstream.

Commit 39c60a0948cc '[SCSI] sd: fix array cache flushing bug causing
performance problems' added temp as a pointer to "temporary " and used
sizeof(temp) - 1 as its length.  But sizeof(temp) is the size of the
pointer, not the size of the string constant.  Change temp to a static
array so that sizeof() does what was intended.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: fix decoding of compounds across page boundaries

commit 247500820ebd02ad87525db5d9b199e5b66f6636 upstream.

A freebsd NFSv4.0 client was getting rare IO errors expanding a tarball.
A network trace showed the server returning BAD_XDR on the final getattr
of a getattr+write+getattr compound.  The final getattr started on a
page boundary.

I believe the Linux client ignores errors on the post-write getattr, and
that that's why we haven't seen this before.

Reported-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"

commit 828c6a102b1f2b8583fadc0e779c46b31d448f0b upstream.

This reverts commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366.

As reported by Stefan, this device already works with the parport_serial
driver, so the 8250_pci driver should not also try to grab it as well.

Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Cc: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: add stable_kernel_rules.txt to stable maintainer information

commit 7b175c46720f8e6b92801bb634c93d1016f80c62 upstream.

This hopefully will help point developers to the proper way that patches
should be submitted for inclusion in the stable kernel releases.

Reported-by: David Howells <dhowells@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sanitize argument for format string

commit 1c8fca1d92e14859159a82b8a380d220139b7344 upstream.

The template lookup interface does not provide a way to use format
strings, so make sure that the interface cannot be abused accidentally.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: do not pass disk names as format strings

commit ffc8b30866879ed9ba62bd0a86fecdbd51cd3d19 upstream.

Disk names may contain arbitrary strings, so they must not be
interpreted as format strings.  It seems that only md allows arbitrary
strings to be used for disk names, but this could allow for a local
memory corruption from uid 0 into ring 0.

CVE-2013-2851

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hpfs: better test for errors

commit 3ebacb05044f82c5f0bb456a894eb9dc57d0ed90 upstream.

The test if bitmap access is out of bound could errorneously pass if the
device size is divisible by 16384 sectors and we are asking for one bitmap
after the end.

Check for invalid size in the superblock. Invalid size could cause integer
overflows in the rest of the code.

Signed-off-by: Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

charger-manager: Ensure event is not used as format string

commit 3594f4c0d7bc51e3a7e6d73c44e368ae079e42f3 upstream.

The exposed interface for cm_notify_event() could result in the event msg
string being parsed as a format string. Make sure it is only used as a
literal string.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/cdrom/cdrom.c: use kzalloc() for failing hardware

commit 542db01579fbb7ea7d1f7bb9ddcef1559df660b2 upstream.

In drivers/cdrom/cdrom.c mmc_ioctl_cdrom_read_data() allocates a memory
area with kmalloc in line 2885.

  2885         cgc->buffer = kmalloc(blocksize, GFP_KERNEL);
  2886         if (cgc->buffer == NULL)
  2887                 return -ENOMEM;

In line 2908 we can find the copy_to_user function:

  2908         if (!ret && copy_to_user(arg, cgc->buffer, blocksize))

The cgc->buffer is never cleaned and initialized before this function.
If ret = 0 with the previous basic block, it's possible to display some
memory bytes in kernel space from userspace.

When we read a block from the disk it normally fills the ->buffer but if
the drive is malfunctioning there is a chance that it would only be
partially filled.  The result is an leak information to userspace.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jonathan Salwan <jonathan.salwan@gmail.com>
Cc: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: Fix NULL pointer dereference in auth client code

commit 2cb33cac622afde897aa02d3dcd9fbba8bae839e upstream.

A malicious monitor can craft an auth reply message that could cause a
NULL function pointer dereference in the client's kernel.

To prevent this, the auth_none protocol handler needs an empty
ceph_auth_client_ops->build_request() function.

CVE-2013-1059

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Chanam Park <chanam.park@hkpco.kr>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.52

perf: Fix mmap() accounting hole

commit 9bb5d40cd93c9dd4be74834b1dcb1ba03629716b upstream.

Vince's fuzzer once again found holes. This time it spotted a leak in
the locked page accounting.

When an event had redirected output and its close() was the last
reference to the buffer we didn't have a vm context to undo accounting.

Change the code to destroy the buffer on the last munmap() and detach
all redirected events at that time. This provides us the right context
to undo the vm accounting.

[Backporting for 3.4-stable.
VM_RESERVED flag was replaced with pair 'VM_DONTEXPAND | VM_DONTDUMP' in
314e51b9 since 3.7.0-rc1, and 314e51b9 comes from a big patchset, we didn't
backport the patchset, so I restored 'VM_DNOTEXPAND | VM_DONTDUMP' as before:
- vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP;
+ vma->vm_flags |= VM_DONTCOPY | VM_RESERVED;
 -- zliu]

Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130604084421.GI8923@twins.programming.kicks-ass.net
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Zhouping Liu <zliu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix perf mmap bugs

commit 26cb63ad11e04047a64309362674bcbbd6a6f246 upstream.

Vince reported a problem found by his perf specific trinity
fuzzer.

Al noticed 2 problems with perf's mmap():

 - it has issues against fork() since we use vma->vm_mm for accounting.
 - it has an rb refcount leak on double mmap().

We fix the issues against fork() by using VM_DONTCOPY; I don't
think there's code out there that uses this; we didn't hear
about weird accounting problems/crashes. If we do need this to
work, the previously proposed VM_PINNED could make this work.

Aside from the rb reference leak spotted by Al, Vince's example
prog was indeed doing a double mmap() through the use of
perf_event_set_output().

This exposes another problem, since we now have 2 events with
one buffer, the accounting gets screwy because we account per
event. Fix this by making the buffer responsible for its own
accounting.

[Backporting for 3.4-stable.
VM_RESERVED flag was replaced with pair 'VM_DONTEXPAND | VM_DONTDUMP' in
314e51b9 since 3.7.0-rc1, and 314e51b9 comes from a big patchset, we didn't
backport the patchset, so I restored 'VM_DNOTEXPAND | VM_DONTDUMP' as before:
-       vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND | VM_DONTDUMP;
+       vma->vm_flags |= VM_DONTCOPY | VM_RESERVED;
 -- zliu]

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20130528085548.GA12193@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Zhouping Liu <zliu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pch_uart: fix a deadlock when pch_uart as console

commit 384e301e3519599b000c1a2ecd938b533fc15d85 upstream.

When we use pch_uart as system console like 'console=ttyPCH0,115200',
then 'send break' to it. We'll encounter the deadlock on a cpu/core,
with interrupts disabled on the core. When we happen to have all irqs
affinity to cpu0 then the deadlock on cpu0 actually deadlock whole
system.

In pch_uart_interrupt, we have spin_lock_irqsave(&priv->lock, flags)
then call pch_uart_err_ir when break is received. Then the call to
dev_err would actually call to pch_console_write then we'll run into
another spin_lock(&priv->lock), with interrupts disabled.

So in the call sequence lead by pch_uart_interrupt, we should be
carefully to call functions that will 'print message to console' only
in case the uart port is not being used as serial console.

Signed-off-by: Liang Li <liang.li@windriver.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: fix a horrid bug

commit 605c912bb843c024b1ed173dc427cd5c08e5d54d upstream.

Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no
mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are
in the middle of 'ubifs_readdir()'.

This means that 'file->private_data' can be freed while 'ubifs_readdir()' uses
it, and this is a very bad bug: not only 'ubifs_readdir()' can return garbage,
but this may corrupt memory and lead to all kinds of problems like crashes an
security holes.

This patch fixes the problem by using the 'file->f_version' field, which
'->llseek()' always unconditionally sets to zero. We set it to 1 in
'ubifs_readdir()' and whenever we detect that it became 0, we know there was a
seek and it is time to clear the state saved in 'file->private_data'.

I tested this patch by writing a user-space program which runds readdir and
seek in parallell. I could easily crash the kernel without these patches, but
could not crash it with these patches.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: prepare to fix a horrid bug

commit 33f1a63ae84dfd9ad298cf275b8f1887043ced36 upstream.

Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no
mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are
in the middle of 'ubifs_readdir()'.

First of all, this means that 'file->private_data' can be freed while
'ubifs_readdir()' uses it.  But this particular patch does not fix the problem.
This patch is only a preparation, and the fix will follow next.

In this patch we make 'ubifs_readdir()' stop using 'file->f_pos' directly,
because 'file->f_pos' can be changed by '->llseek()' at any point. This may
lead 'ubifs_readdir()' to returning inconsistent data: directory entry names
may correspond to incorrect file positions.

So here we introduce a local variable 'pos', read 'file->f_pose' once at very
the beginning, and then stick to 'pos'. The result of this is that when
'ubifs_dir_llseek()' changes 'file->f_pos' while we are in the middle of
'ubifs_readdir()', the latter "wins".

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Disable monitoring on setuid processes for regular users

commit 2976b10f05bd7f6dab9f9e7524451ddfed656a89 upstream.

There was a a bug in setup_new_exec(), whereby
the test to disabled perf monitoring was not
correct because the new credentials for the
process were not yet committed and therefore
the get_dumpable() test was never firing.

The patch fixes the problem by moving the
perf_event test until after the credentials
are committed.

Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dlci: validate the net device in dlci_del()

commit 578a1310f2592ba90c5674bca21c1dbd1adf3f0a upstream.

We triggered an oops while running trinity with 3.4 kernel:

BUG: unable to handle kernel paging request at 0000000100000d07
IP: [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci]
PGD 640c0d067 PUD 0
Oops: 0000 [#1] PREEMPT SMP
CPU 3
...
Pid: 7302, comm: trinity-child3 Not tainted 3.4.24.09+ 40 Huawei Technologies Co., Ltd. Tecal RH2285          /BC11BTSA
RIP: 0010:[<ffffffffa0109738>]  [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci]
...
Call Trace:
  [<ffffffff8137c5c3>] sock_ioctl+0x153/0x280
  [<ffffffff81195494>] do_vfs_ioctl+0xa4/0x5e0
  [<ffffffff8118354a>] ? fget_light+0x3ea/0x490
  [<ffffffff81195a1f>] sys_ioctl+0x4f/0x80
  [<ffffffff81478b69>] system_call_fastpath+0x16/0x1b
...

It's because the net device is not a dlci device.

Reported-by: Li Jinyue <lijinyue@huawei.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dlci: acquire rtnl_lock before calling __dev_get_by_name()

commit 11eb2645cbf38a08ae491bf6c602eea900ec0bb5 upstream.

Otherwise the net device returned can be freed at anytime.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot()

commit c790b0ad23f427c7522ffed264706238c57c007e upstream.

fetch_bp_busy_slots() and toggle_bp_slot() use
for_each_online_cpu(), this is obviously wrong wrt cpu_up() or
cpu_down(), we can over/under account the per-cpu numbers.

For example:

# echo 0 >> /sys/devices/system/cpu/cpu1/online
# perf record -e mem:0x10 -p 1 &
# echo 1 >> /sys/devices/system/cpu/cpu1/online
# perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10 -C1 -a &
# taskset -p 0x2 1

triggers the same WARN_ONCE("Can't find any breakpoint slot") in
arch_install_hw_breakpoint().

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20130620155009.GA6327@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix crash in l2cap_build_cmd() with small MTU

commit 300b962e5244a1ea010df7e88595faa0085b461d upstream.

If a too small MTU value is set with ioctl(HCISETACLMTU) or by a bogus
controller, memory corruption happens due to a memcpy() call with
negative length.

Fix this crash on either incoming or outgoing connections with a MTU
smaller than L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE:

[   46.885433] BUG: unable to handle kernel paging request at f56ad000
[   46.888037] IP: [<c03d94cd>] memcpy+0x1d/0x40
[   46.888037] *pdpt = 0000000000ac3001 *pde = 00000000373f8067 *pte = 80000000356ad060
[   46.888037] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
[   46.888037] Modules linked in: hci_vhci bluetooth virtio_balloon i2c_piix4 uhci_hcd usbcore usb_common
[   46.888037] CPU: 0 PID: 1044 Comm: kworker/u3:0 Not tainted 3.10.0-rc1+ #12
[   46.888037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[   46.888037] Workqueue: hci0 hci_rx_work [bluetooth]
[   46.888037] task: f59b15b0 ti: f55c4000 task.ti: f55c4000
[   46.888037] EIP: 0060:[<c03d94cd>] EFLAGS: 00010212 CPU: 0
[   46.888037] EIP is at memcpy+0x1d/0x40
[   46.888037] EAX: f56ac1c0 EBX: fffffff8 ECX: 3ffffc6e EDX: f55c5cf2
[   46.888037] ESI: f55c6b32 EDI: f56ad000 EBP: f55c5c68 ESP: f55c5c5c
[   46.888037]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   46.888037] CR0: 8005003b CR2: f56ad000 CR3: 3557d000 CR4: 000006f0
[   46.888037] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[   46.888037] DR6: ffff0ff0 DR7: 00000400
[   46.888037] Stack:
[   46.888037]  fffffff8 00000010 00000003 f55c5cac f8c6a54c ffffffff f8c69eb2 00000000
[   46.888037]  f4783cdc f57f0070 f759c590 1001c580 00000003 0200000a 00000000 f5a88560
[   46.888037]  f5ba2600 f5a88560 00000041 00000000 f55c5d90 f8c6f4c7 00000008 f55c5cf2
[   46.888037] Call Trace:
[   46.888037]  [<f8c6a54c>] l2cap_send_cmd+0x1cc/0x230 [bluetooth]
[   46.888037]  [<f8c69eb2>] ? l2cap_global_chan_by_psm+0x152/0x1a0 [bluetooth]
[   46.888037]  [<f8c6f4c7>] l2cap_connect+0x3f7/0x540 [bluetooth]
[   46.888037]  [<c019b37b>] ? trace_hardirqs_off+0xb/0x10
[   46.888037]  [<c01a0ff8>] ? mark_held_locks+0x68/0x110
[   46.888037]  [<c064ad20>] ? mutex_lock_nested+0x280/0x360
[   46.888037]  [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150
[   46.888037]  [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0
[   46.888037]  [<c064ad08>] ? mutex_lock_nested+0x268/0x360
[   46.888037]  [<c01a125b>] ? trace_hardirqs_on+0xb/0x10
[   46.888037]  [<f8c72f8d>] l2cap_recv_frame+0xb2d/0x1d30 [bluetooth]
[   46.888037]  [<c01a0ff8>] ? mark_held_locks+0x68/0x110
[   46.888037]  [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150
[   46.888037]  [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0
[   46.888037]  [<f8c754f1>] l2cap_recv_acldata+0x2a1/0x320 [bluetooth]
[   46.888037]  [<f8c491d8>] hci_rx_work+0x518/0x810 [bluetooth]
[   46.888037]  [<f8c48df2>] ? hci_rx_work+0x132/0x810 [bluetooth]
[   46.888037]  [<c0158979>] process_one_work+0x1a9/0x600
[   46.888037]  [<c01588fb>] ? process_one_work+0x12b/0x600
[   46.888037]  [<c015922e>] ? worker_thread+0x19e/0x320
[   46.888037]  [<c015922e>] ? worker_thread+0x19e/0x320
[   46.888037]  [<c0159187>] worker_thread+0xf7/0x320
[   46.888037]  [<c0159090>] ? rescuer_thread+0x290/0x290
[   46.888037]  [<c01602f8>] kthread+0xa8/0xb0
[   46.888037]  [<c0656777>] ret_from_kernel_thread+0x1b/0x28
[   46.888037]  [<c0160250>] ? flush_kthread_worker+0x120/0x120
[   46.888037] Code: c3 90 8d 74 26 00 e8 63 fc ff ff eb e8 90 55 89 e5 83 ec 0c 89 5d f4 89 75 f8 89 7d fc 3e 8d 74 26 00 89 cb 89 c7 c1 e9 02 89 d6 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 5d f4 8b 75 f8 8b 7d fc 89
[   46.888037] EIP: [<c03d94cd>] memcpy+0x1d/0x40 SS:ESP 0068:f55c5c5c
[   46.888037] CR2: 00000000f56ad000
[   46.888037] ---[ end trace 0217c1f4d78714a9 ]---

Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMU

commit 63384fd0b1509acf522a8a8fcede09087eedb7df upstream.

Commit 1bc3974 (ARM: 7755/1: handle user space mapped pages in
flush_kernel_dcache_page) moved the implementation of
flush_kernel_dcache_page() into mm/flush.c but did not implement it
on noMMU ARM.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page

commit 1bc39742aab09248169ef9d3727c9def3528b3f3 upstream.

Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that
the pages it needs to handle are kernel mapped only.  However, for
example when doing direct I/O, pages with user space mappings may
occur.

Thus, continue to do lazy flushing if there are no user space
mappings.  Otherwise, flush the kernel cache lines directly.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.51

inotify: invalid mask should return a error number but not set it

commit 04df32fa10ab9a6f0643db2949d42efc966bc844 upstream.

When we run the crackerjack testsuite, the inotify_add_watch test is
stalled.

This is caused by the invalid mask 0 - the task is waiting for the event
but it never comes.  inotify_add_watch() should return -EINVAL as it did
before commit 676a0675cf92 ("inotify: remove broken mask checks causing
unmount to be EINVAL").  That commit removes the invalid mask check, but
that check is needed.

Check the mask's ALL_INOTIFY_BITS before the inotify_arg_to_mask() call.
If none are set, just return -EINVAL.

Because IN_UNMOUNT is in ALL_INOTIFY_BITS, this change will not trigger
the problem that above commit fixed.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Jim Somerville <Jim.Somerville@windriver.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()

commit 574780fd5e6ec52bd43e0bdb777a19e4c4c6aa9c upstream.

Here is a fun one.  Bug seems to have been introduced by commit 140854cb,
almost two years ago.  I have no idea why we only started seeing it now,
but we did.

Rough callgraph:
core_tpg_set_initiator_node_queue_depth()
`-> spin_lock_irqsave(&tpg->session_lock, flags);
`-> lio_tpg_shutdown_session()
    `-> iscsit_stop_time2retain_timer()
        `-> spin_unlock_bh(&se_tpg->session_lock);
        `-> spin_lock_bh(&se_tpg->session_lock);
`-> spin_unlock_irqrestore(&tpg->session_lock, flags);

core_tpg_set_initiator_node_queue_depth() used to call spin_lock_bh(),
but 140854cb changed that to spin_lock_irqsave().  However,
lio_tpg_shutdown_session() still claims to be called with spin_lock_bh()
held, as does iscsit_stop_time2retain_timer():
 *      Called with spin_lock_bh(&struct se_portal_group->session_lock) held

Stale documentation is mostly annoying, but in this case the dropping
the lock with the _bh variant is plain wrong.  It is also wrong to drop
locks two functions below the lock-holder, but I will ignore that bit
for now.

After some more locking and unlocking we eventually hit this backtrace:
------------[ cut here ]------------
WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0xe8/0x100()
Pid: 24645, comm: lio_helper.py Tainted: G           O 3.6.11+
Call Trace:
 [<ffffffff8103e5ff>] warn_slowpath_common+0x7f/0xc0
 [<ffffffffa040ae37>] ? iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod]
 [<ffffffff8103e65a>] warn_slowpath_null+0x1a/0x20
 [<ffffffff810472f8>] local_bh_enable_ip+0xe8/0x100
 [<ffffffff815b8365>] _raw_spin_unlock_bh+0x15/0x20
 [<ffffffffa040ae37>] iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod]
 [<ffffffffa041149a>] iscsit_stop_session+0xfa/0x1c0 [iscsi_target_mod]
 [<ffffffffa0417fab>] lio_tpg_shutdown_session+0x7b/0x90 [iscsi_target_mod]
 [<ffffffffa033ede4>] core_tpg_set_initiator_node_queue_depth+0xe4/0x290 [target_core_mod]
 [<ffffffffa0409032>] iscsit_tpg_set_initiator_node_queue_depth+0x12/0x20 [iscsi_target_mod]
 [<ffffffffa0415c29>] lio_target_nacl_store_cmdsn_depth+0xa9/0x180 [iscsi_target_mod]
 [<ffffffffa0331b49>] target_fabric_nacl_base_attr_store+0x39/0x40 [target_core_mod]
 [<ffffffff811b857d>] configfs_write_file+0xbd/0x120
 [<ffffffff81148f36>] vfs_write+0xc6/0x180
 [<ffffffff81149251>] sys_write+0x51/0x90
 [<ffffffff815c0969>] system_call_fastpath+0x16/0x1b
---[ end trace 3747632b9b164652 ]---

As a pure band-aid, this patch drops the _bh.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable

commit 35a2fbc941accd0e9f1bfadd669311786118d874 upstream.

Add product id for Abbott strip port cable for Precision meter which
uses the TI 3410 chip.

Signed-off-by: Anders Hammarquist <iko@iko.pp.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: cyttsp - fix memcpy size param

commit d2983cdb480157f637df07723f28aaa657b1080d upstream.

memcpy param is wrong because of offset in bl_cmd, this may corrupt the
stack which may cause a crash.

Tested-by: Ferruh Yigit <fery@cypress.com> on TMA300-DVK
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: rlb mode of bond should not alter ARP originating via bridge

[ Upstream commit 567b871e503316b0927e54a3d7c86d50b722d955 ]

Do not modify or load balance ARP packets passing through balance-alb
mode (wherein the ARP did not originate locally, and arrived via a bridge).

Modifying pass-through ARP replies causes an incorrect MAC address
to be placed into the ARP packet, rendering peers unable to communicate
with the actual destination from which the ARP reply originated.

Load balancing pass-through ARP requests causes an entry to be
created for the peer in the rlb table, and bond_alb_monitor will
occasionally issue ARP updates to all peers in the table instrucing them
as to which MAC address they should communicate with; this occurs when
some event sets rx_ntt.  In the bridged case, however, the MAC address
used for the update would be the MAC of the slave, not the actual source
MAC of the originating destination.  This would render peers unable to
communicate with the destinations beyond the bridge.

Signed-off-by: Zheng Li <zheng.x.li@oracle.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthew O'Connor <liquidhorse@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: Fix sendmsg() return value

[ Upstream commit a6f79d0f26704214b5b702bbac525cb72997f984 ]

PPPoL2TP sockets should comply with the standard send*() return values
(i.e. return number of bytes sent instead of 0 upon success).

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: Fix PPP header erasure and memory leak

[ Upstream commit 55b92b7a11690bc377b5d373872a6b650ae88e64 ]

Copy user data after PPP framing header. This prevents erasure of the
added PPP header and avoids leaking two bytes of uninitialised memory
at the end of skb's data buffer.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: packet_getname_spkt: make sure string is always 0-terminated

[ Upstream commit 2dc85bf323515e59e15dfa858d1472bb25cad0fe ]

uaddr->sa_data is exactly of size 14, which is hard-coded here and
passed as a size argument to strncpy(). A device name can be of size
IFNAMSIZ (== 16), meaning we might leave the destination string
unterminated. Thus, use strlcpy() and also sizeof() while we're
at it. We need to memset the data area beforehand, since strlcpy
does not padd the remaining buffer with zeroes for user space, so
that we do not possibly leak anything.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: check return value of team_get_port_by_index_rcu() for NULL

[ Upstream commit 76c455decbbad31de21c727edb184a963f42b40b ]

team_get_port_by_index_rcu() might return NULL due to race between port
removal and skb tx path. Panic is easily triggeable when txing packets
and adding/removing port in a loop.

introduced by commit 3d249d4ca "net: introduce ethernet teaming device"
and commit 753f993911b "team: introduce random mode" (for random mode)

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sctp: fix NULL pointer dereference in socket destruction

[ Upstream commit 1abd165ed757db1afdefaac0a4bc8a70f97d258c ]

While stress testing sctp sockets, I hit the following panic:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp]
PGD 7cead067 PUD 7ce76067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in: sctp(F) libcrc32c(F) [...]
CPU: 7 PID: 2950 Comm: acc Tainted: GF            3.10.0-rc2+ #1
Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011
task: ffff88007ce0e0c0 ti: ffff88007b568000 task.ti: ffff88007b568000
RIP: 0010:[<ffffffffa0490c4e>]  [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp]
RSP: 0018:ffff88007b569e08  EFLAGS: 00010292
RAX: 0000000000000000 RBX: ffff88007db78a00 RCX: dead000000200200
RDX: ffffffffa049fdb0 RSI: ffff8800379baf38 RDI: 0000000000000000
RBP: ffff88007b569e18 R08: ffff88007c230da0 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880077990d00 R14: 0000000000000084 R15: ffff88007db78a00
FS:  00007fc18ab61700(0000) GS:ffff88007fc60000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000020 CR3: 000000007cf9d000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffff88007b569e38 ffff88007db78a00 ffff88007b569e38 ffffffffa049fded
 ffffffff81abf0c0 ffff88007db78a00 ffff88007b569e58 ffffffff8145b60e
 0000000000000000 0000000000000000 ffff88007b569eb8 ffffffff814df36e
Call Trace:
 [<ffffffffa049fded>] sctp_destroy_sock+0x3d/0x80 [sctp]
 [<ffffffff8145b60e>] sk_common_release+0x1e/0xf0
 [<ffffffff814df36e>] inet_create+0x2ae/0x350
 [<ffffffff81455a6f>] __sock_create+0x11f/0x240
 [<ffffffff81455bf0>] sock_create+0x30/0x40
 [<ffffffff8145696c>] SyS_socket+0x4c/0xc0
 [<ffffffff815403be>] ? do_page_fault+0xe/0x10
 [<ffffffff8153cb32>] ? page_fault+0x22/0x30
 [<ffffffff81544e02>] system_call_fastpath+0x16/0x1b
Code: 0c c9 c3 66 2e 0f 1f 84 00 00 00 00 00 e8 fb fe ff ff c9 c3 66 0f
      1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 <48>
      8b 47 20 48 89 fb c6 47 1c 01 c6 40 12 07 e8 9e 68 01 00 48
RIP  [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp]
 RSP <ffff88007b569e08>
CR2: 0000000000000020
---[ end trace e0d71ec1108c1dd9 ]---

I did not hit this with the lksctp-tools functional tests, but with a
small, multi-threaded test program, that heavily allocates, binds,
listens and waits in accept on sctp sockets, and then randomly kills
some of them (no need for an actual client in this case to hit this).
Then, again, allocating, binding, etc, and then killing child processes.

This panic then only occurs when ``echo 1 > /proc/sys/net/sctp/auth_enable''
is set. The cause for that is actually very simple: in sctp_endpoint_init()
we enter the path of sctp_auth_init_hmacs(). There, we try to allocate
our crypto transforms through crypto_alloc_hash(). In our scenario,
it then can happen that crypto_alloc_hash() fails with -EINTR from
crypto_larval_wait(), thus we bail out and release the socket via
sk_common_release(), sctp_destroy_sock() and hit the NULL pointer
dereference as soon as we try to access members in the endpoint during
sctp_endpoint_free(), since endpoint at that time is still NULL. Now,
if we have that case, we do not need to do any cleanup work and just
leave the destruction handler.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: assign rt6_info to inet6_ifaddr in init_loopback

[ Upstream commit 534c877928a16ae5f9776436a497109639bf67dc ]

Commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f
"net IPv6 : Fix broken IPv6 routing table after loopback down-up"
forgot to assign rt6_info to the inet6_ifaddr.
When disable the net device, the rt6_info which allocated
in init_loopback will not be destroied in __ipv6_ifa_notify.

This will trigger the waring message below
[23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1

Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: force a reload of first item in hlist_nulls_for_each_entry_rcu

[ Upstream commit c87a124a5d5e8cf8e21c4363c3372bcaf53ea190 ]

Roman Gushchin discovered that udp4_lib_lookup2() was not reloading
first item in the rcu protected list, in case the loop was restarted.

This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37

rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is
ptr->field :

In some cases, gcc caches the value or ptr->field in a register.

Use a barrier() to disallow such caching, as documented in
Documentation/atomic_ops.txt line 114

Thanks a lot to Roman for providing analysis and numerous patches.

Diagnosed-by: Roman Gushchin <klamm@yandex-team.ru>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Boris Zhmurov <zhmurov@yandex-team.ru>
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg

[ Upstream commits 1be374a0518a288147c6a7398792583200a67261 and
  a7526eb5d06b0084ef12d7b168d008fcf516caab ]

MSG_CMSG_COMPAT is (AFAIK) not intended to be part of the API --
it's a hack that steals a bit to indicate to other networking code
that a compat entry was used.  So don't allow it from a non-compat
syscall.

This prevents an oops when running this code:

int main()
{
int s;
struct sockaddr_in addr;
struct msghdr *hdr;

char *highpage = mmap((void*)(TASK_SIZE_MAX - 4096), 4096,
                      PROT_READ | PROT_WRITE,
                      MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
if (highpage == MAP_FAILED)
err(1, "mmap");

s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
if (s == -1)
err(1, "socket");

        addr.sin_family = AF_INET;
        addr.sin_port = htons(1);
        addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
if (connect(s, (struct sockaddr*)&addr, sizeof(addr)) != 0)
err(1, "connect");

void *evil = highpage + 4096 - COMPAT_MSGHDR_SIZE;
printf("Evil address is %p\n", evil);

if (syscall(__NR_sendmmsg, s, evil, 1, MSG_CMSG_COMPAT) < 0)
err(1, "sendmmsg");

return 0;
}

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip_tunnel: fix kernel panic with icmp_dest_unreach

[ Upstream commit a622260254ee481747cceaaa8609985b29a31565 ]

Daniel Petre reported crashes in icmp_dst_unreach() with following call
graph:

Daniel found a similar problem mentioned in
 http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html

And indeed this is the root cause : skb->cb[] contains data fooling IP
stack.

We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure()
is called. Or else skb->cb[] might contain garbage from GSO segmentation
layer.

A similar fix was tested on linux-3.9, but gre code was refactored in
linux-3.10. I'll send patches for stable kernels as well.

Many thanks to Daniel for providing reports, patches and testing !

Reported-by: Daniel Petre <daniel.petre@rcs-rds.ro>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: xps: fix reordering issues

[ Upstream commit 547669d483e5783d722772af1483fa474da7caf9 ]

commit 3853b5841c01a ("xps: Improvements in TX queue selection")
introduced ooo_okay flag, but the condition to set it is slightly wrong.

In our traces, we have seen ACK packets being received out of order,
and RST packets sent in response.

We should test if we have any packets still in host queue.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: bug fix in proportional rate reduction.

[ Upstream commit 35f079ebbc860dcd1cca70890c9c8d59c1145525 ]

This patch is a fix for a bug triggering newly_acked_sacked < 0
in tcp_ack(.).

The bug is triggered by sacked_out decreasing relative to prior_sacked,
but packets_out remaining the same as pior_packets. This is because the
snapshot of prior_packets is taken after tcp_sacktag_write_queue() while
prior_sacked is captured before tcp_sacktag_write_queue(). The problem
is: tcp_sacktag_write_queue (tcp_match_skb_to_sack() -> tcp_fragment)
adjusts the pcount for packets_out and sacked_out (MSS change or other
reason). As a result, this delta in pcount is reflected in
(prior_sacked - sacked_out) but not in (prior_packets - packets_out).

This patch does the following:
1) initializes prior_packets at the start of tcp_ack() so as to
capture the delta in packets_out created by tcp_fragment.
2) introduces a new "previous_packets_out" variable that snapshots
packets_out right before tcp_clean_rtx_queue, so pkts_acked can be
correctly computed as before.
3) Computes pkts_acked using previous_packets_out, and computes
newly_acked_sacked using prior_packets.

Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8139cp: reset BQL when ring tx ring cleared

[ Upstream commit 98962baad72fd6d393bf39dbb7c2076532c363c6 ]

This patch cures transmit timeout's with DHCP observed
while running under KVM. When the transmit ring is cleaned out,
the Byte Queue Limit values need to be reset.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: fix offloaded tx checksum for small packets.

[ Upstream commit b423e9ae49d78ea3f53b131c8d5a6087aed16fd6 ]

8168evl offloaded checksums are wrong since commit
e5195c1f31f399289347e043d6abf3ffa80f0005 ("r8169: fix 8168evl frame padding.")
pads small packets to 60 bytes (without ethernet checksum). Typical symptoms
appear as UDP checksums which are wrong by the count of added bytes.

It isn't worth compensating. Let the driver checksum.

Due to the skb length changes, TSO code is moved before the Tx descriptor gets
written.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlabel: improve domain mapping validation

[ Upstream commit 6b21e1b77d1a3d58ebfd513264c885695e8a0ba5 ]

The net/netlabel/netlabel_domainhash.c:netlbl_domhsh_add() function
does not properly validate new domain hash entries resulting in
potential problems when an administrator attempts to add an invalid
entry.  One such problem, as reported by Vlad Halilov, is a kernel
BUG (found in netlabel_domainhash.c:netlbl_domhsh_audit_add()) when
adding an IPv6 outbound mapping with a CIPSO configuration.

This patch corrects this problem by adding the necessary validation
code to netlbl_domhsh_add() via the newly created
netlbl_domhsh_validate() function.

Ideally this patch should also be pushed to the currently active
-stable trees.

Reported-by: Vlad Halilov <vlad.halilov@gmail.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: fix possible crashes in ip6_cork_release()

[ Upstream commit 284041ef21fdf2e0d216ab6b787bc9072b4eb58a ]

commit 0178b695fd6b4 ("ipv6: Copy cork options in ip6_append_data")
added some code duplication and bad error recovery, leading to potential
crash in ip6_cork_release() as kfree() could be called with garbage.

use kzalloc() to make sure this wont happen.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gianfar: add missing iounmap() on error in gianfar_ptp_probe()

[ Upstream commit e5f5e380e0f3bb11f04ca5bc66a551e58e0ad26e ]

Add the missing iounmap() before return from gianfar_ptp_probe()
in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix tcp_md5_hash_skb_data()

[ Upstream commit 54d27fcb338bd9c42d1dfc5a39e18f6f9d373c2e ]

TCP md5 communications fail [1] for some devices, because sg/crypto code
assume page offsets are below PAGE_SIZE.

This was discovered using mlx4 driver [2], but I suspect loopback
might trigger the same bug now we use order-3 pages in tcp_sendmsg()

[1] Failure is giving following messages.

huh, entered softirq 3 NET_RX ffffffff806ad230 preempt_count 00000100,
exited with 00000101?

[2] mlx4 driver uses order-2 pages to allocate RX frags

Reported-by: Matt Schnall <mischnal@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bernhard Beck <bbeck@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: remove vcpu's CPL check in host-invoked XCR set

commit 764bcbc5a6d7a2f3e75c9f0e4caa984e2926e346 upstream.

__kvm_set_xcr function does the CPL check when set xcr. __kvm_set_xcr is
called in two flows, one is invoked by guest, call stack shown as below,

  handle_xsetbv(or xsetbv_interception)
    kvm_set_xcr
      __kvm_set_xcr

the other one is invoked by host, for example during system reset:

  kvm_arch_vcpu_ioctl
    kvm_vcpu_ioctl_x86_set_xcrs
      __kvm_set_xcr

The former does need the CPL check, but the latter does not.

Signed-off-by: Zhang Haoyu <haoyu.zhang@huawei.com>
[Tweaks to commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tilepro: work around module link error with gcc 4.7

commit 3cb3f839d306443f3d1e79b0bde1a2ad2c12b555 upstream.

gcc 4.7.x is emitting calls to __ffsdi2 where previously
it used to inline the appropriate ctz instructions.
While this needs to be fixed in gcc, it's also easy to avoid
having it cause build failures when building with those
compilers by exporting __ffsdi2 to modules.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: remove notifier from list before freeing it

commit 72b5322f11ff0abf6a52b3007486656578d2c982 upstream.

The @cn is stay in @clk_notifier_list after it is freed, it cause
memory corruption.

Example, if @clk is registered(first), unregistered(first),
registered(second), unregistered(second).

The freed @cn will be used when @clk is registered(second),
and the bug will be happened when @clk is unregistered(second):

[  517.040000] clk_notif_dbg clk_notif_dbg.1: clk_notifier_unregister()
[  517.040000] Unable to handle kernel paging request at virtual address 00df3008
[  517.050000] pgd = ed858000
[  517.050000] [00df3008] *pgd=00000000
[  517.060000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[  517.060000] Modules linked in: clk_notif_dbg(O-) [last unloaded: clk_notif_dbg]
[  517.060000] CPU: 1 PID: 499 Comm: modprobe Tainted: G           O 3.10.0-rc3-00119-ga93cb29-dirty #85
[  517.060000] task: ee1e0180 ti: ee3e6000 task.ti: ee3e6000
[  517.060000] PC is at srcu_readers_seq_idx+0x48/0x84
[  517.060000] LR is at srcu_readers_seq_idx+0x60/0x84
[  517.060000] pc : [<c0052720>]    lr : [<c0052738>]    psr: 80070013
[  517.060000] sp : ee3e7d48  ip : 00000000  fp : ee3e7d6c
[  517.060000] r10: 00000000  r9 : ee3e6000  r8 : 00000000
[  517.060000] r7 : ed84fe4c  r6 : c068ec90  r5 : c068e430  r4 : 00000000
[  517.060000] r3 : 00df3000  r2 : 00000000  r1 : 00000002  r0 : 00000000
[  517.060000] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  517.060000] Control: 18c5387d  Table: 2d85804a  DAC: 00000015
[  517.060000] Process modprobe (pid: 499, stack limit = 0xee3e6238)
[  517.060000] Stack: (0xee3e7d48 to 0xee3e8000)
....
[  517.060000] [<c0052720>] (srcu_readers_seq_idx+0x48/0x84) from [<c0052790>] (try_check_zero+0x34/0xfc)
[  517.060000] [<c0052790>] (try_check_zero+0x34/0xfc) from [<c00528b0>] (srcu_advance_batches+0x58/0x114)
[  517.060000] [<c00528b0>] (srcu_advance_batches+0x58/0x114) from [<c0052c30>] (__synchronize_srcu+0x114/0x1ac)
[  517.060000] [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) from [<c0052d14>] (synchronize_srcu+0x2c/0x34)
[  517.060000] [<c0052d14>] (synchronize_srcu+0x2c/0x34) from [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74)
[  517.060000] [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) from [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0)
[  517.060000] [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) from [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg])
[  517.060000] [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) from [<c02bb974>] (platform_drv_remove+0x24/0x28)
[  517.060000] [<c02bb974>] (platform_drv_remove+0x24/0x28) from [<c02b9bf8>] (__device_release_driver+0x8c/0xd4)
[  517.060000] [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) from [<c02ba680>] (driver_detach+0x9c/0xc4)
[  517.060000] [<c02ba680>] (driver_detach+0x9c/0xc4) from [<c02b99c4>] (bus_remove_driver+0xcc/0xfc)
[  517.060000] [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) from [<c02bace4>] (driver_unregister+0x54/0x78)
[  517.060000] [<c02bace4>] (driver_unregister+0x54/0x78) from [<c02bbb44>] (platform_driver_unregister+0x1c/0x20)
[  517.060000] [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) from [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg])
[  517.060000] [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) from [<c00835e4>] (SyS_delete_module+0x200/0x28c)
[  517.060000] [<c00835e4>] (SyS_delete_module+0x200/0x28c) from [<c000edc0>] (ret_fast_syscall+0x0/0x48)
[  517.060000] Code: e5973004 e7911102 e0833001 e2881002 (e7933101)

Reported-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: shortened $SUBJECT]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: work around Android accessory firmware bug

commit 342cda29343a6272c630f94ed56810a76740251b upstream.

When the Android firmware enables the audio interfaces in accessory
mode, it always declares in the control interface's baInterfaceNr array
that interfaces 0 and 1 belong to the audio function.  However, the
accessory interface itself, if also enabled, already is at index 0 and
shifts the actual audio interface numbers to 1 and 2, which prevents the
PCM streaming interface from being seen by the host driver.

To get the PCM interface interface to work, detect when the descriptors
point to the (for this driver useless) accessory interface, and redirect
to the correct one.

Reported-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Tested-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310

commit 36691e1be6ec551eef4a5225f126a281f8c051c2 upstream.

Just like the previous fix for LogitechHD Webcam c270 in commit
11e7064f35bb87da8f427d1aa4bbd8b7473a3993, c310 model also requires the
same workaround for avoiding the kernel warning.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.50

powerpc: Fix missing/delayed calls to irq_work

commit 230b3034793247f61e6a0b08c44cf415f6d92981 upstream.

When replaying interrupts (as a result of the interrupt occurring
while soft-disabled), in the case of the decrementer, we are exclusively
testing for a pending timer target. However we also use decrementer
interrupts to trigger the new "irq_work", which in this case would
be missed.

This change the logic to force a replay in both cases of a timer
boundary reached and a decrementer interrupt having actually occurred
while disabled. The former test is still useful to catch cases where
a CPU having been hard-disabled for a long time completely misses the
interrupt due to a decrementer rollover.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix stack overflow crash in resume_kernel when ftracing

commit 0e37739b1c96d65e6433998454985de994383019 upstream.

It's possible for us to crash when running with ftrace enabled, eg:

  Bad kernel stack pointer bffffd12 at c00000000000a454
  cpu 0x3: Vector: 300 (Data Access) at [c00000000ffe3d40]
      pc: c00000000000a454: resume_kernel+0x34/0x60
      lr: c00000000000335c: performance_monitor_common+0x15c/0x180
      sp: bffffd12
     msr: 8000000000001032
     dar: bffffd12
   dsisr: 42000000

If we look at current's stack (paca->__current->stack) we see it is
equal to c0000002ecab0000. Our stack is 16K, and comparing to
paca->kstack (c0000002ecab3e30) we can see that we have overflowed our
kernel stack. This leads to us writing over our struct thread_info, and
in this case we have corrupted thread_info->flags and set
_TIF_EMULATE_STACK_STORE.

Dumping the stack we see:

  3:mon> t c0000002ecab0000
  [c0000002ecab0000] c00000000002131c .performance_monitor_exception+0x5c/0x70
  [c0000002ecab0080] c00000000000335c performance_monitor_common+0x15c/0x180
  --- Exception: f01 (Performance Monitor) at c0000000000fb2ec .trace_hardirqs_off+0x1c/0x30
  [c0000002ecab0370] c00000000016fdb0 .trace_graph_entry+0xb0/0x280 (unreliable)
  [c0000002ecab0410] c00000000003d038 .prepare_ftrace_return+0x98/0x130
  [c0000002ecab04b0] c00000000000a920 .ftrace_graph_caller+0x14/0x28
  [c0000002ecab0520] c0000000000d6b58 .idle_cpu+0x18/0x90
  [c0000002ecab05a0] c00000000000a934 .return_to_handler+0x0/0x34
  [c0000002ecab0620] c00000000001e660 .timer_interrupt+0x160/0x300
  [c0000002ecab06d0] c0000000000025dc decrementer_common+0x15c/0x180
  --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0
  [c0000002ecab09c0] c0000000000fe044 .trace_hardirqs_on+0x14/0x30 (unreliable)
  [c0000002ecab0fb0] c00000000016fe3c .trace_graph_entry+0x13c/0x280
  [c0000002ecab1050] c00000000003d038 .prepare_ftrace_return+0x98/0x130
  [c0000002ecab10f0] c00000000000a920 .ftrace_graph_caller+0x14/0x28
  [c0000002ecab1160] c0000000000161f0 .__ppc64_runlatch_on+0x10/0x40
  [c0000002ecab11d0] c00000000000a934 .return_to_handler+0x0/0x34
  --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0

  ... and so on

__ppc64_runlatch_on() is called from RUNLATCH_ON in the exception entry
path. At that point the irq state is not consistent, ie. interrupts are
hard disabled (by the exception entry), but the paca soft-enabled flag
may be out of sync.

This leads to the local_irq_restore() in trace_graph_entry() actually
enabling interrupts, which we do not want. Because we have not yet
reprogrammed the decrementer we immediately take another decrementer
exception, and recurse.

The fix is twofold. Firstly make sure we call DISABLE_INTS before
calling RUNLATCH_ON. The badly named DISABLE_INTS actually reconciles
the irq state in the paca with the hardware, making it safe again to
call local_irq_save/restore().

Although that should be sufficient to fix the bug, we also mark the
runlatch routines as notrace. They are called very early in the
exception entry and we are asking for trouble tracing them. They are
also fairly uninteresting and tracing them just adds unnecessary
overhead.

[ This regression was introduced by fe1952fc0afb9a2e4c79f103c08aef5d13db1873
  "powerpc: Rework runlatch code" by myself --BenH
]

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix statvfs fr_size

commit 92a49fb0f79f3300e6e50ddf56238e70678e4202 upstream.

Different versions of glibc are broken in different ways, but the short of
it is that for the time being, frsize should == bsize, and be used as the
multiple for the blocks, free, and available fields.  This mirrors what is
done for NFS.  The previous reporting of the page size for frsize meant
that newer glibc and df would report a very small value for the fs size.

Fixes http://tracker.ceph.com/issues/3793.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>