review.tizen.org Git - platform/kernel/linux-rpi.git/log

bpf: Fix possible out of bound write in narrow load handling

Fix a verifier bug found by smatch static checker in [0].

This problem has never been seen in prod to my best knowledge. Fixing it
still seems to be a good idea since it's hard to say for sure whether
it's possible or not to have a scenario where a combination of
convert_ctx_access() and a narrow load would lead to an out of bound
write.

When narrow load is handled, one or two new instructions are added to
insn_buf array, but before it was only checked that

cnt >= ARRAY_SIZE(insn_buf)

And it's safe to add a new instruction to insn_buf[cnt++] only once. The
second try will lead to out of bound write. And this is what can happen
if `shift` is set.

Fix it by making sure that if the BPF_RSH instruction has to be added in
addition to BPF_AND then there is enough space for two more instructions
in insn_buf.

The full report [0] is below:

kernel/bpf/verifier.c:12304 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array
kernel/bpf/verifier.c:12311 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array

kernel/bpf/verifier.c
    12282
    12283 insn->off = off & ~(size_default - 1);
    12284 insn->code = BPF_LDX | BPF_MEM | size_code;
    12285 }
    12286
    12287 target_size = 0;
    12288 cnt = convert_ctx_access(type, insn, insn_buf, env->prog,
    12289 &target_size);
    12290 if (cnt == 0 || cnt >= ARRAY_SIZE(insn_buf) ||
                                        ^^^^^^^^^^^^^^^^^^^^^^^^^^^
Bounds check.

    12291     (ctx_field_size && !target_size)) {
    12292 verbose(env, "bpf verifier is misconfigured\n");
    12293 return -EINVAL;
    12294 }
    12295
    12296 if (is_narrower_load && size < target_size) {
    12297 u8 shift = bpf_ctx_narrow_access_offset(
    12298 off, size, size_default) * 8;
    12299 if (ctx_field_size <= 4) {
    12300 if (shift)
    12301 insn_buf[cnt++] = BPF_ALU32_IMM(BPF_RSH,
                                                         ^^^^^
increment beyond end of array

    12302 insn->dst_reg,
    12303 shift);
--> 12304 insn_buf[cnt++] = BPF_ALU32_IMM(BPF_AND, insn->dst_reg,
                                                 ^^^^^
out of bounds write

    12305 (1 << size * 8) - 1);
    12306 } else {
    12307 if (shift)
    12308 insn_buf[cnt++] = BPF_ALU64_IMM(BPF_RSH,
    12309 insn->dst_reg,
    12310 shift);
    12311 insn_buf[cnt++] = BPF_ALU64_IMM(BPF_AND, insn->dst_reg,
                                        ^^^^^^^^^^^^^^^
Same.

    12312 (1ULL << size * 8) - 1);
    12313 }
    12314 }
    12315
    12316 new_prog = bpf_patch_insn_data(env, i + delta, insn_buf, cnt);
    12317 if (!new_prog)
    12318 return -ENOMEM;
    12319
    12320 delta += cnt - 1;
    12321
    12322 /* keep walking new program and skip insns we just inserted */
    12323 env->prog = new_prog;
    12324 insn      = new_prog->insnsi + i + delta;
    12325 }
    12326
    12327 return 0;
    12328 }

[0] https://lore.kernel.org/bpf/20210817050843.GA21456@kili/

v1->v2:
- clarify that problem was only seen by static checker but not in prod;

Fixes: 46f53a65d2de ("bpf: Allow narrow loads with offset > 0")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820163935.1902398-1-rdna@fb.com

Merge branch 'bpf: Allow bpf_get_netns_cookie in BPF_PROG_TYPE_SK_MSG'

Xu Liu says:

====================

We'd like to be able to identify netns from sk_msg hooks
to accelerate local process communication form different netns.
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Test for get_netns_cookie

Add test to use get_netns_cookie() from BPF_PROG_TYPE_SK_MSG.

Signed-off-by: Xu Liu <liuxu623@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820071712.52852-3-liuxu623@gmail.com

bpf: Allow bpf_get_netns_cookie in BPF_PROG_TYPE_SK_MSG

We'd like to be able to identify netns from sk_msg hooks
to accelerate local process communication form different netns.

Signed-off-by: Xu Liu <liuxu623@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820071712.52852-2-liuxu623@gmail.com

Merge branch 'selftests/bpf: minor fixups'

Li Zhijian says:

====================
Fix a few issues reported by 0Day/LKP during runing selftests/bpf.

Changelog:
V2:
- folded previous similar standalone patch to [1/5], and add acked tag
from Song Liu
- add acked tag to [2/5], [3/5] from Song Liu
- [4/5]: move test_bpftool.py to TEST_PROGS_EXTENDED, files in TEST_GEN_PROGS_EXTENDED
are generated by make. Otherwise, it will break out-of-tree install:
'make O=/kselftest-build SKIP_TARGETS= V=1 -C tools/testing/selftests install INSTALL_PATH=/kselftest-install'
- [5/5]: new patch
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Exit with KSFT_SKIP if no Makefile found

This would happend when we run the tests after install kselftests
root@lkp-skl-d01 ~# /kselftests/run_kselftest.sh -t bpf:test_doc_build.sh
TAP version 13
1..1
# selftests: bpf: test_doc_build.sh
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
         LANGUAGE = (unset),
         LC_ALL = (unset),
         LC_ADDRESS = "en_US.UTF-8",
         LC_NAME = "en_US.UTF-8",
         LC_MONETARY = "en_US.UTF-8",
         LC_PAPER = "en_US.UTF-8",
         LC_IDENTIFICATION = "en_US.UTF-8",
         LC_TELEPHONE = "en_US.UTF-8",
         LC_MEASUREMENT = "en_US.UTF-8",
         LC_TIME = "en_US.UTF-8",
         LC_NUMERIC = "en_US.UTF-8",
         LANG = "en_US.UTF-8"
     are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
# skip:    bpftool files not found!
#
ok 1 selftests: bpf: test_doc_build.sh # SKIP

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820025549.28325-1-lizhijian@cn.fujitsu.com

selftests/bpf: Add missing files required by test_bpftool.sh for installing

test_bpftool.sh relies on bpftool and test_bpftool.py.

'make install' will install bpftool to INSTALL_PATH/bpf/bpftool, and
export it to PATH so that it can be used after installing.

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820015556.23276-5-lizhijian@cn.fujitsu.com

selftests/bpf: Add default bpftool built by selftests to PATH

For 'make run_tests':
selftests will build bpftool into tools/testing/selftests/bpf/tools/sbin/bpftool
by default.

==================
root@lkp-skl-d01 /opt/rootfs/v5.14-rc4# make -C tools/testing/selftests/bpf run_tests
make: Entering directory '/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf'
  MKDIR    include
  MKDIR    libbpf
  MKDIR    bpftool
[...]
  GEN     /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/profiler.skel.h
  CC      /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/prog.o
  GEN     /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pid_iter.skel.h
  CC      /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pids.o
  LINK    /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/bpftool
  INSTALL bpftool
  GEN      vmlinux.h
[...]
# test_feature_dev_json (test_bpftool.TestBpftool) ... ERROR
# test_feature_kernel (test_bpftool.TestBpftool) ... ERROR
# test_feature_kernel_full (test_bpftool.TestBpftool) ... ERROR
# test_feature_kernel_full_vs_not_full (test_bpftool.TestBpftool) ... ERROR
# test_feature_macros (test_bpftool.TestBpftool) ... Error: bug: failed to retrieve CAP_BPF status: Invalid argument
# ERROR
#
# ======================================================================
# ERROR: test_feature_dev_json (test_bpftool.TestBpftool)
# ----------------------------------------------------------------------
# Traceback (most recent call last):
#   File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 57, in wrapper
#     return f(*args, iface, **kwargs)
#   File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 82, in test_feature_dev_json
#     res = bpftool_json(["feature", "probe", "dev", iface])
#   File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 42, in bpftool_json
#     res = _bpftool(args)
#   File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 34, in _bpftool
#     return subprocess.check_output(_args)
#   File "/usr/lib/python3.7/subprocess.py", line 395, in check_output
#     **kwargs).stdout
#   File "/usr/lib/python3.7/subprocess.py", line 487, in run
#     output=stdout, stderr=stderr)
# subprocess.CalledProcessError: Command '['bpftool', '-j', 'feature', 'probe', 'dev', 'dummy0']' returned non-zero exit status 255.
#
==================

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-4-lizhijian@cn.fujitsu.com

selftests/bpf: Make test_doc_build.sh work from script directory

Previously, it fails as below:
-------------
root@lkp-skl-d01 /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf# ./test_doc_build.sh
++ realpath --relative-to=/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf ./test_doc_build.sh
+ SCRIPT_REL_PATH=test_doc_build.sh
++ dirname test_doc_build.sh
+ SCRIPT_REL_DIR=.
++ realpath /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/./../../../../
+ KDIR_ROOT_DIR=/opt/rootfs/v5.14-rc4
+ cd /opt/rootfs/v5.14-rc4
+ for tgt in docs docs-clean
+ make -s -C /opt/rootfs/v5.14-rc4/. docs
make: *** No rule to make target 'docs'. Stop.
+ for tgt in docs docs-clean
+ make -s -C /opt/rootfs/v5.14-rc4/. docs-clean
make: *** No rule to make target 'docs-clean'. Stop.
-----------

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-3-lizhijian@cn.fujitsu.com

selftests/bpf: Enlarge select() timeout for test_maps

0Day robot observed that it's easily timeout on a heavy load host.
-------------------
# selftests: bpf: test_maps
# Fork 1024 tasks to 'test_update_delete'
# Fork 1024 tasks to 'test_update_delete'
# Fork 100 tasks to 'test_hashmap'
# Fork 100 tasks to 'test_hashmap_percpu'
# Fork 100 tasks to 'test_hashmap_sizes'
# Fork 100 tasks to 'test_hashmap_walk'
# Fork 100 tasks to 'test_arraymap'
# Fork 100 tasks to 'test_arraymap_percpu'
# Failed sockmap unexpected timeout
not ok 3 selftests: bpf: test_maps # exit=1
# selftests: bpf: test_lru_map
# nr_cpus:8
-------------------
Since this test will be scheduled by 0Day to a random host that could have
only a few cpus(2-8), enlarge the timeout to avoid a false NG report.

In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps',
and knew 10S is likely enough, but i still perfer to a larger value 30.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-2-lizhijian@cn.fujitsu.com

selftests/bpf: Reduce flakyness in timer_mim

This patch extends wait time in timer_mim. As observed in slow CI environment,
it is possible to have interrupt/preemption long enough to cause the test to
fail, almost 1 failure in 5 runs.

Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210823213629.3519641-1-fallentree@fb.com

Merge branch 'Refactor cgroup_bpf internals to use more specific attach_type'

Dave Marchevsky says:

====================

The cgroup_bpf struct has a few arrays (effective, progs, and flags) of
size MAX_BPF_ATTACH_TYPE. These are meant to separate progs by their
attach type, currently represented by the bpf_attach_type enum.

There are some bpf_attach_type values which are not valid attach types
for cgroup bpf programs. Programs with these attach types will never be
handled by cgroup_bpf_{attach,detach} and thus will never be held in
cgroup_bpf structs. Even if such programs did make it into their
reserved slot in those arrays, they would never be executed.

Accordingly we can migrate to a new internal cgroup_bpf-specific enum
for these arrays, saving some bytes per cgroup and making it more
obvious which BPF programs belong there. netns_bpf_attach_type is an
existing example of this pattern, let's do similar for cgroup_bpf.

v1->v2: Address Daniel's comments
* Reverse xmas tree ordering for def changes
* Helper macro to reduce to_cgroup_bpf_attach_type boilerplate
* checkpatch.pl complains: "ERROR: Macros with complex values should
be enclosed in parentheses". Found some existing macros (do 'git grep
"define case"') which get same complaint. Think it's fine to keep
as-is since it's immediately undef'd.
* Remove CG_BPF_ prefix from cgroup_bpf_attach_type
* Although I agree that the prefix is redundant, the de-prefixed
names feel a bit too 'general' given the internal use of the enum.
e.g. when someone sees CGROUP_INET6_BIND it's not obvious that it
should only be used in certain ways internally.
* Don't feel strongly about this, just my thoughts as a noob to the
internals.
* Rebase onto latest bpf-next/master
* No significant conflicts, some small boilerplate adjustments
needed to catch up to Andrii's "bpf: Refactor BPF_PROG_RUN_ARRAY
family of macros into functions" change
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Migrate cgroup_bpf to internal cgroup_bpf_attach_type enum

Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf
attach types and a function to map bpf_attach_type values to the new
enum. Inspired by netns_bpf_attach_type.

Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever
possible. Functionality is unchanged as attach_type_to_prog_type
switches in bpf/syscall.c were preventing non-cgroup programs from
making use of the invalid cgroup_bpf array slots.

As a result struct cgroup_bpf uses 504 fewer bytes relative to when its
arrays were sized using MAX_BPF_ATTACH_TYPE.

bpf_cgroup_storage is notably not migrated as struct
bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type
member which is not meant to be opaque. Similarly, bpf_cgroup_link
continues to report its bpf_attach_type member to userspace via fdinfo
and bpf_link_info.

To ease disambiguation, bpf_attach_type variables are renamed from
'type' to 'atype' when changed to cgroup_bpf_attach_type.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com

af_unix: Fix NULL pointer bug in unix_shutdown

Commit 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap")
introduced a bug for af_unix SEQPACKET type. In unix_shutdown, the
unhash function will call prot->unhash(), which is NULL for SEQPACKET.
And kernel will panic. On ARM32, it will show following messages: (it
likely affects x86 too).

Fix the bug by checking the prot->unhash is NULL or not first.

Kernel log:
<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = 2fba1ffb
*pgd=00000000
Internal error: Oops: 80000005 [#1] PREEMPT SMP THUMB2
Modules linked in:
CPU: 1 PID: 1999 Comm: falkon Tainted: G        W
5.14.0-rc5-01175-g94531cfcbe79-dirty #9240
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
PC is at 0x0
LR is at unix_shutdown+0x81/0x1a8
pc : [<00000000>]    lr : [<c08f3311>]    psr: 600f0013
sp : e45aff70  ip : e463a3c0  fp : beb54f04
r10: 00000125  r9 : e45ae000  r8 : c4a56664
r7 : 00000001  r6 : c4a56464  r5 : 00000001  r4 : c4a56400
r3 : 00000000  r2 : c5a6b180  r1 : 00000000  r0 : c4a56400
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 50c5387d  Table: 05aa804a  DAC: 00000051
Register r0 information: slab PING start c4a56400 pointer offset 0
Register r1 information: NULL pointer
Register r2 information: slab task_struct start c5a6b180 pointer offset 0
Register r3 information: NULL pointer
Register r4 information: slab PING start c4a56400 pointer offset 0
Register r5 information: non-paged memory
Register r6 information: slab PING start c4a56400 pointer offset 100
Register r7 information: non-paged memory
Register r8 information: slab PING start c4a56400 pointer offset 612
Register r9 information: non-slab/vmalloc memory
Register r10 information: non-paged memory
Register r11 information: non-paged memory
Register r12 information: slab filp start e463a3c0 pointer offset 0
Process falkon (pid: 1999, stack limit = 0x9ec48895)
Stack: (0xe45aff70 to 0xe45b0000)
ff60:                                     e45ae000 c5f26a00 00000000 00000125
ff80: c0100264 c07f7fa3 beb54f04 fffffff7 00000001 e6f3fc0e b5e5e9ec beb54ec4
ffa0: b5da0ccc c010024b b5e5e9ec beb54ec4 0000000f 00000000 00000000 beb54ebc
ffc0: b5e5e9ec beb54ec4 b5da0ccc 00000125 beb54f58 00785238 beb5529c beb54f04
ffe0: b5da1e24 beb54eac b301385c b62b6ee8 600f0030 0000000f 00000000 00000000
[<c08f3311>] (unix_shutdown) from [<c07f7fa3>] (__sys_shutdown+0x2f/0x50)
[<c07f7fa3>] (__sys_shutdown) from [<c010024b>]
(__sys_trace_return+0x1/0x16)
Exception stack(0xe45affa8 to 0xe45afff0)

Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/bpf/20210821180738.1151155-1-jiang.wang@bytedance.com

selftests/bpf: Add tests for {set|get} socket option from setsockopt BPF

Adding selftests for the newly added functionality to call bpf_setsockopt()
and bpf_getsockopt() from setsockopt BPF programs.

Test Details:

1. BPF Program

   Checks for changes in IPV6_TCLASS(SOL_IPV6) via setsockopt
   If the cca for the socket is not cubic do nothing
   If the newly set value for IPV6_TCLASS is 45 (0x2d) (as per our use-case)
   then change the cc from cubic to reno

2. User Space Program

   Creates an AF_INET6 socket and set the cca for that to be "cubic"
   Attach the program and set the IPV6_TCLASS to 0x2d using setsockopt
   Verify the cca for the socket changed to reno

Signed-off-by: Prankur Gupta <prankgup@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210817224221.3257826-3-prankgup@fb.com

bpf: Add support for {set|get} socket options from setsockopt BPF

Add logic to call bpf_setsockopt() and bpf_getsockopt() from setsockopt BPF
programs. An example use case is when the user sets the IPV6_TCLASS socket
option, we would also like to change the tcp-cc for that socket.

We don't have any use case for calling bpf_setsockopt() from supposedly read-
only sys_getsockopt(), so it is made available to BPF_CGROUP_SETSOCKOPT only
at this point.

Signed-off-by: Prankur Gupta <prankgup@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210817224221.3257826-2-prankgup@fb.com

bpf: Use kvmalloc for map keys in syscalls

Same as previous patch but for the keys. memdup_bpfptr is renamed
to kvmemdup_bpfptr (and converted to kvmalloc).

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210818235216.1159202-2-sdf@google.com

bpf: Use kvmalloc for map values in syscall

Use kvmalloc/kvfree for temporary value when manipulating a map via
syscall. kmalloc might not be sufficient for percpu maps where the value
is big (and further multiplied by hundreds of CPUs).

Can be reproduced with netcnt test on qemu with "-smp 255".

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210818235216.1159202-1-sdf@google.com

selftests/bpf: Adding delay in socketmap_listen to reduce flakyness

This patch adds a 1ms delay to reduce flakyness of the test.

Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210819163609.2583758-1-fallentree@fb.com

bpf: Fix NULL event->prog pointer access in bpf_overflow_handler

Andrii reported that libbpf CI hit the following oops when
running selftest send_signal:
  [ 1243.160719] BUG: kernel NULL pointer dereference, address: 0000000000000030
  [ 1243.161066] #PF: supervisor read access in kernel mode
  [ 1243.161066] #PF: error_code(0x0000) - not-present page
  [ 1243.161066] PGD 0 P4D 0
  [ 1243.161066] Oops: 0000 [#1] PREEMPT SMP NOPTI
  [ 1243.161066] CPU: 1 PID: 882 Comm: new_name Tainted: G           O      5.14.0-rc5 #1
  [ 1243.161066] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
  [ 1243.161066] RIP: 0010:bpf_overflow_handler+0x9a/0x1e0
  [ 1243.161066] Code: 5a 84 c0 0f 84 06 01 00 00 be 66 02 00 00 48 c7 c7 6d 96 07 82 48 8b ab 18 05 00 00 e8 df 55 eb ff 66 90 48 8d 75 48 48 89 e7 <ff> 55 30 41 89 c4 e8 fb c1 f0 ff 84 c0 0f 84 94 00 00 00 e8 6e 0f
  [ 1243.161066] RSP: 0018:ffffc900000c0d80 EFLAGS: 00000046
  [ 1243.161066] RAX: 0000000000000002 RBX: ffff8881002e0dd0 RCX: 00000000b4b47cf8
  [ 1243.161066] RDX: ffffffff811dcb06 RSI: 0000000000000048 RDI: ffffc900000c0d80
  [ 1243.161066] RBP: 0000000000000000 R08: 0000000000000000 R09: 1a9d56bb00000000
  [ 1243.161066] R10: 0000000000000001 R11: 0000000000080000 R12: 0000000000000000
  [ 1243.161066] R13: ffffc900000c0e00 R14: ffffc900001c3c68 R15: 0000000000000082
  [ 1243.161066] FS:  00007fc0be2d3380(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
  [ 1243.161066] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 1243.161066] CR2: 0000000000000030 CR3: 0000000104f8e000 CR4: 00000000000006e0
  [ 1243.161066] Call Trace:
  [ 1243.161066]  <IRQ>
  [ 1243.161066]  __perf_event_overflow+0x4f/0xf0
  [ 1243.161066]  perf_swevent_hrtimer+0x116/0x130
  [ 1243.161066]  ? __lock_acquire+0x378/0x2730
  [ 1243.161066]  ? __lock_acquire+0x372/0x2730
  [ 1243.161066]  ? lock_is_held_type+0xd5/0x130
  [ 1243.161066]  ? find_held_lock+0x2b/0x80
  [ 1243.161066]  ? lock_is_held_type+0xd5/0x130
  [ 1243.161066]  ? perf_event_groups_first+0x80/0x80
  [ 1243.161066]  ? perf_event_groups_first+0x80/0x80
  [ 1243.161066]  __hrtimer_run_queues+0x1a3/0x460
  [ 1243.161066]  hrtimer_interrupt+0x110/0x220
  [ 1243.161066]  __sysvec_apic_timer_interrupt+0x8a/0x260
  [ 1243.161066]  sysvec_apic_timer_interrupt+0x89/0xc0
  [ 1243.161066]  </IRQ>
  [ 1243.161066]  asm_sysvec_apic_timer_interrupt+0x12/0x20
  [ 1243.161066] RIP: 0010:finish_task_switch+0xaf/0x250
  [ 1243.161066] Code: 31 f6 68 90 2a 09 81 49 8d 7c 24 18 e8 aa d6 03 00 4c 89 e7 e8 12 ff ff ff 4c 89 e7 e8 ca 9c 80 00 e8 35 af 0d 00 fb 4d 85 f6 <58> 74 1d 65 48 8b 04 25 c0 6d 01 00 4c 3b b0 a0 04 00 00 74 37 f0
  [ 1243.161066] RSP: 0018:ffffc900001c3d18 EFLAGS: 00000282
  [ 1243.161066] RAX: 000000000000031f RBX: ffff888104cf4980 RCX: 0000000000000000
  [ 1243.161066] RDX: 0000000000000000 RSI: ffffffff82095460 RDI: ffffffff820adc4e
  [ 1243.161066] RBP: ffffc900001c3d58 R08: 0000000000000001 R09: 0000000000000001
  [ 1243.161066] R10: 0000000000000001 R11: 0000000000080000 R12: ffff88813bd2bc80
  [ 1243.161066] R13: ffff8881002e8000 R14: ffff88810022ad80 R15: 0000000000000000
  [ 1243.161066]  ? finish_task_switch+0xab/0x250
  [ 1243.161066]  ? finish_task_switch+0x70/0x250
  [ 1243.161066]  __schedule+0x36b/0xbb0
  [ 1243.161066]  ? _raw_spin_unlock_irqrestore+0x2d/0x50
  [ 1243.161066]  ? lockdep_hardirqs_on+0x79/0x100
  [ 1243.161066]  schedule+0x43/0xe0
  [ 1243.161066]  pipe_read+0x30b/0x450
  [ 1243.161066]  ? wait_woken+0x80/0x80
  [ 1243.161066]  new_sync_read+0x164/0x170
  [ 1243.161066]  vfs_read+0x122/0x1b0
  [ 1243.161066]  ksys_read+0x93/0xd0
  [ 1243.161066]  do_syscall_64+0x35/0x80
  [ 1243.161066]  entry_SYSCALL_64_after_hwframe+0x44/0xae

The oops can also be reproduced with the following steps:
  ./vmtest.sh -s
  # at qemu shell
  cd /root/bpf && while true; do ./test_progs -t send_signal

Further analysis showed that the failure is introduced with
commit b89fbfbb854c ("bpf: Implement minimal BPF perf link").
With the above commit, the following scenario becomes possible:
    cpu1                        cpu2
                                hrtimer_interrupt -> bpf_overflow_handler
    (due to closing link_fd)
    bpf_perf_link_release ->
    perf_event_free_bpf_prog ->
    perf_event_free_bpf_handler ->
      WRITE_ONCE(event->overflow_handler, event->orig_overflow_handler)
      event->prog = NULL
                                bpf_prog_run(event->prog, &ctx)

In the above case, the event->prog is NULL for bpf_prog_run, hence
causing oops.

To fix the issue, check whether event->prog is NULL or not. If it
is, do not call bpf_prog_run. This seems working as the above
reproducible step runs more than one hour and I didn't see any
failures.

Fixes: b89fbfbb854c ("bpf: Implement minimal BPF perf link")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210819155209.1927994-1-yhs@fb.com

bpf: Undo off-by-one in interpreter tail call count limit

The BPF interpreter as well as x86-64 BPF JIT were both in line by allowing
up to 33 tail calls (however odd that number may be!). Recently, this was
changed for the interpreter to reduce it down to 32 with the assumption that
this should have been the actual limit "which is in line with the behavior of
the x86 JITs" according to b61a28cf11d61 ("bpf: Fix off-by-one in tail call
count limiting").

Paul recently reported:

  I'm a bit surprised by this because I had previously tested the tail call
  limit of several JIT compilers and found it to be 33 (i.e., allowing chains
  of up to 34 programs). I've just extended a test program I had to validate
  this again on the x86-64 JIT, and found a limit of 33 tail calls again [1].

  Also note we had previously changed the RISC-V and MIPS JITs to allow up to
  33 tail calls [2, 3], for consistency with other JITs and with the interpreter.
  We had decided to increase these two to 33 rather than decrease the other
  JITs to 32 for backward compatibility, though that probably doesn't matter
  much as I'd expect few people to actually use 33 tail calls.

  [1] https://github.com/pchaigno/tail-call-bench/commit/ae7887482985b4b1745c9b2ef7ff9ae506c82886
  [2] 96bc4432f5ad ("bpf, riscv: Limit to 33 tail calls")
  [3] e49e6f6db04e ("bpf, mips: Limit to 33 tail calls")

Therefore, revert b61a28cf11d61 to re-align interpreter to limit a maximum of
33 tail calls. While it is unlikely to hit the limit for the vast majority,
programs in the wild could one way or another depend on this, so lets rather
be a bit more conservative, and lets align the small remainder of JITs to 33.
If needed in future, this limit could be slightly increased, but not decreased.

Fixes: b61a28cf11d61 ("bpf: Fix off-by-one in tail call count limiting")
Reported-by: Paul Chaignon <paul@cilium.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/CAO5pjwTWrC0_dzTbTHFPSqDwA56aVH+4KFGVqdq8=ASs0MqZGQ@mail.gmail.com

selftests/bpf: Test for get_netns_cookie

Add test to use get_netns_cookie() from BPF_PROG_TYPE_SOCK_OPS.

Signed-off-by: Xu Liu <liuxu623@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210818105820.91894-3-liuxu623@gmail.com

bpf: Allow bpf_get_netns_cookie in BPF_PROG_TYPE_SOCK_OPS

We'd like to be able to identify netns from sockops hooks to
accelerate local process communication form different netns.

Signed-off-by: Xu Liu <liuxu623@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210818105820.91894-2-liuxu623@gmail.com

libbpf: Rename libbpf documentation index file

This patch renames a documentation libbpf.rst to index.rst. In order
for readthedocs.org to pick this file up and properly build the
documentation site.

It also changes the title type of the ABI subsection in the
naming convention doc. This is so that readthedocs.org doesn't treat this
section as a separate document.

Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210818151313.49992-1-grantseltzer@gmail.com

bpf: Remove redundant initialization of variable allow

The variable allow is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817170842.495440-1-colin.king@canonical.com

Merge branch 'selftests/bpf: fix flaky send_signal test'

Yonghong Song says:

====================

The bpf selftest send_signal() is flaky for its subtests trying to
send signals in softirq/nmi context. To reduce flakiness, the
signal-targetted process priority is boosted, which should minimize
preemption of that process and improve the possibility that
the underlying task in softirq/nmi context is the bpf_send_signal()
wanted task.

Patch #1 did a refactoring to use ASSERT_* instead of old CHECK macros.
Patch #2 did actual change of boosting priority.

Changelog:
  v1 -> v2:
    remove skip logic where the underlying task in interrupt context
    is not the intended one.
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

selftests/bpf: Fix flaky send_signal test

libbpf CI has reported send_signal test is flaky although
I am not able to reproduce it in my local environment.
But I am able to reproduce with on-demand libbpf CI ([1]).

Through code analysis, the following is possible reason.
The failed subtest runs bpf program in softirq environment.
Since bpf_send_signal() only sends to a fork of "test_progs"
process. If the underlying current task is
not "test_progs", bpf_send_signal() will not be triggered
and the subtest will fail.

To reduce the chances where the underlying process is not
the intended one, this patch boosted scheduling priority to
-20 (highest allowed by setpriority() call). And I did
10 runs with on-demand libbpf CI with this patch and I
didn't observe any failures.

[1] https://github.com/libbpf/libbpf/actions/workflows/ondemand.yml

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817190923.3186725-1-yhs@fb.com

selftests/bpf: Replace CHECK with ASSERT_* macros in send_signal.c

Replace CHECK in send_signal.c with ASSERT_* macros as
ASSERT_* macros are generally preferred. There is no
funcitonality change.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817190918.3186400-1-yhs@fb.com

Merge branch 'selftests/bpf: Improve the usability of test_progs'

Yucong Sun says:

====================

This short series adds two new switches to test_progs, "-a" and "-d",
adding support for both exact string matching, as well as '*' wildcards.
It also cleans up the output to make it possible to generate
allowlist/denylist using common cli tools.
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

selftests/bpf: Support glob matching for test selector.

This patch adds '-a' and '-d' arguments supporting both exact string match as
well as using '*' wildcard in test/subtests selection. '-a' and '-t' can
co-exists, same as '-d' and '-b', in which case they just add to the list of
allowed or denied test selectors.

Caveat: Same as the current substring matching mechanism, test and subtest
selector applies independently, 'a*/b*' will execute all tests matching "a*",
and with subtest name matching "b*", but tests matching "a*" that has no
subtests will also be executed.

Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-5-fallentree@fb.com

selftests/bpf: Also print test name in subtest status message

This patch add test name in subtest status message line, making it possible to
grep ':OK' in the output to generate a list of passed test+subtest names, which
can be processed to generate argument list to be used with "-a", "-d" exact
string matching.

Example:

#1/1 align/mov:OK
..
#1/12 align/pointer variable subtraction:OK
#1 align:OK

Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-4-fallentree@fb.com

selftests/bpf: Correctly display subtest skip status

In skip_account(), test->skip_cnt is set to 0 at the end, this makes next print
statement never display SKIP status for the subtest. This patch moves the
accounting logic after the print statement, fixing the issue.

This patch also added SKIP status display for normal tests.

Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-3-fallentree@fb.com

selftests/bpf: Skip loading bpf_testmod when using -l to list tests.

When using "-l", test_progs often is executed as non-root user,
load_bpf_testmod() will fail and output errors. This patch skips loading bpf
testmod when "-l" is specified, making output cleaner.

Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-2-fallentree@fb.com

selftests/bpf: Add exponential backoff to map_delete_retriable in test_maps

Using a fixed delay of 1 microsecond has proven flaky in slow CPU environment,
e.g. Github Actions CI system. This patch adds exponential backoff with a cap
of 50ms to reduce the flakiness of the test. Initial delay is chosen at random
in the range [0ms, 5ms).

Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817045713.3307985-1-fallentree@fb.com

selftests/bpf: Add exponential backoff to map_update_retriable in test_maps

Using a fixed delay of 1 microsecond has proven flaky in slow CPU environment,
e.g. Github Actions CI system. This patch adds exponential backoff with a cap
of 50ms to reduce the flakiness of the test. Initial delay is chosen at random
in the range [0ms, 5ms).

Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210816175250.296110-1-fallentree@fb.com

Merge branch 'sockmap: add sockmap support for unix stream socket'

Jiang Wang says:

====================

This patch series add support for unix stream type
for sockmap. Sockmap already supports TCP, UDP,
unix dgram types. The unix stream support is similar
to unix dgram.

Also add selftests for unix stream type in sockmap tests.
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

selftest/bpf: Add new tests in sockmap for unix stream to tcp.

Add two new test cases in sockmap tests, where unix stream is
redirected to tcp and vice versa.

Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-6-jiang.wang@bytedance.com

selftest/bpf: Change udp to inet in some function names

This is to prepare for adding new unix stream tests.
Mostly renames, also pass the socket types as an argument.

Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-5-jiang.wang@bytedance.com

selftest/bpf: Add tests for sockmap with unix stream type.

Add two tests for unix stream to unix stream redirection
in sockmap tests.

Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-4-jiang.wang@bytedance.com

af_unix: Add unix_stream_proto for sockmap

Previously, sockmap for AF_UNIX protocol only supports
dgram type. This patch add unix stream type support, which
is similar to unix_dgram_proto. To support sockmap, dgram
and stream cannot share the same unix_proto anymore, because
they have different implementations, such as unhash for stream
type (which will remove closed or disconnected sockets from the map),
so rename unix_proto to unix_dgram_proto and add a new
unix_stream_proto.

Also implement stream related sockmap functions.
And add dgram key words to those dgram specific functions.

Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-3-jiang.wang@bytedance.com

af_unix: Add read_sock for stream socket types

To support sockmap for af_unix stream type, implement
read_sock, which is similar to the read_sock for unix
dgram sockets.

Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-2-jiang.wang@bytedance.com

selftests/bpf: Test btf__load_vmlinux_btf/btf__load_module_btf APIs

Add test for btf__load_vmlinux_btf/btf__load_module_btf APIs. The test
loads bpf_testmod module BTF and check existence of a symbol which is
known to exist.

Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210815081035.205879-1-hengqi.chen@gmail.com

bpf: Reconfigure libbpf docs to remove unversioned API

This removes the libbpf_api.rst file from the kernel documentation.
The intention for this file was to pull documentation from comments
above API functions in libbpf. However, due to limitations of the
kernel documentation system, this API documentation could not be
versioned, which is counterintuative to how users expect to use it.
There is also currently no doc comments, making this a blank page.

Once the kernel comment documentation is actually contributed, it
will still exist in the kernel repository, just in the code itself.

A seperate site is being spun up to generate documentaiton from those
comments in a way in which it can be versioned properly.

This also reconfigures the bpf documentation index page to make it
easier to sync to the previously mentioned documentaiton site.

Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210810020508.280639-1-grantseltzer@gmail.com

Merge branch 'bpf-perf-link'

Andrii Nakryiko says:

====================
This patch set implements an ability for users to specify custom black box u64
value for each BPF program attachment, bpf_cookie, which is available to BPF
program at runtime. This is a feature that's critically missing for cases when
some sort of generic processing needs to be done by the common BPF program
logic (or even exactly the same BPF program) across multiple BPF hooks (e.g.,
many uniformly handled kprobes) and it's important to be able to distinguish
between each BPF hook at runtime (e.g., for additional configuration lookup).

The choice of restricting this to a fixed-size 8-byte u64 value is an explicit
design decision. Making this configurable by users adds unnecessary complexity
(extra memory allocations, extra complications on the verifier side to validate
accesses to variable-sized data area) while not really opening up new
possibilities. If user's use case requires storing more data per attachment,
it's possible to use either global array, or ARRAY/HASHMAP BPF maps, where
bpf_cookie would be used as an index into respective storage, populated by
user-space code before creating BPF link. This gives user all the flexibility
and control while keeping BPF verifier and BPF helper API simple.

Currently, similar functionality can only be achieved through:

  - code-generation and BPF program cloning, which is very complicated and
    unmaintainable;
  - on-the-fly C code generation and further runtime compilation, which is
    what BCC uses and allows to do pretty simply. The big downside is a very
    heavy-weight Clang/LLVM dependency and inefficient memory usage (due to
    many BPF program clones and the compilation process itself);
  - in some cases (kprobes and sometimes uprobes) it's possible to do function
    IP lookup to get function-specific configuration. This doesn't work for
    all the cases (e.g., when attaching uprobes to shared libraries) and has
    higher runtime overhead and additional programming complexity due to
    BPF_MAP_TYPE_HASHMAP lookups. Up until recently, before bpf_get_func_ip()
    BPF helper was added, it was also very complicated and unstable (API-wise)
    to get traced function's IP from fentry/fexit and kretprobe.

With libbpf and BPF CO-RE, runtime compilation is not an option, so to be able
to build generic tracing tooling simply and efficiently, ability to provide
additional bpf_cookie value for each *attachment* (as opposed to each BPF
program) is extremely important. Two immediate users of this functionality are
going to be libbpf-based USDT library (currently in development) and retsnoop
([0]), but I'm sure more applications will come once users get this feature in
their kernels.

To achieve above described, all perf_event-based BPF hooks are made available
through a new BPF_LINK_TYPE_PERF_EVENT BPF link, which allows to use common
LINK_CREATE command for program attachments and generally brings
perf_event-based attachments into a common BPF link infrastructure.

With that, LINK_CREATE gets ability to pass throught bpf_cookie value during
link creation (BPF program attachment) time. bpf_get_attach_cookie() BPF
helper is added to allow fetching this value at runtime from BPF program side.
BPF cookie is stored either on struct perf_event itself and fetched from the
BPF program context, or is passed through ambient BPF run context, added in
c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current").

On the libbpf side of things, BPF perf link is utilized whenever is supported
by the kernel instead of using PERF_EVENT_IOC_SET_BPF ioctl on perf_event FD.
All the tracing attach APIs are extended with OPTS and bpf_cookie is passed
through corresponding opts structs.

Last part of the patch set adds few self-tests utilizing new APIs.

There are also a few refactorings along the way to make things cleaner and
easier to work with, both in kernel (BPF_PROG_RUN and BPF_PROG_RUN_ARRAY), and
throughout libbpf and selftests.

Follow-up patches will extend bpf_cookie to fentry/fexit programs.

While adding uprobe_opts, also extend it with ref_ctr_offset for specifying
USDT semaphore (reference counter) offset. Update attach_probe selftests to
validate its functionality. This is another feature (along with bpf_cookie)
required for implementing libbpf-based USDT solution.

  [0] https://github.com/anakryiko/retsnoop

v4->v5:
  - rebase on latest bpf-next to resolve merge conflict;
  - add ref_ctr_offset to uprobe_opts and corresponding selftest;
v3->v4:
  - get rid of BPF_PROG_RUN macro in favor of bpf_prog_run() (Daniel);
  - move #ifdef CONFIG_BPF_SYSCALL check into bpf_set_run_ctx (Daniel);
v2->v3:
  - user_ctx -> bpf_cookie, bpf_get_user_ctx -> bpf_get_attach_cookie (Peter);
  - fix BPF_LINK_TYPE_PERF_EVENT value fix (Jiri);
  - use bpf_prog_run() from bpf_prog_run_pin_on_cpu() (Yonghong);
v1->v2:
  - fix build failures on non-x86 arches by gating on CONFIG_PERF_EVENTS.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

selftests/bpf: Add ref_ctr_offset selftests

Extend attach_probe selftests to specify ref_ctr_offset for uprobe/uretprobe
and validate that its value is incremented from zero.

Turns out that once uprobe is attached with ref_ctr_offset, uretprobe for the
same location/function *has* to use ref_ctr_offset as well, otherwise
perf_event_open() fails with -EINVAL. So this test uses ref_ctr_offset for
both uprobe and uretprobe, even though for the purpose of test uprobe would be
enough.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-17-andrii@kernel.org

libbpf: Add uprobe ref counter offset support for USDT semaphores

When attaching to uprobes through perf subsystem, it's possible to specify
offset of a so-called USDT semaphore, which is just a reference counted u16,
used by kernel to keep track of how many tracers are attached to a given
location. Support for this feature was added in [0], so just wire this through
uprobe_opts. This is important to enable implementing USDT attachment and
tracing through libbpf's bpf_program__attach_uprobe_opts() API.

[0] a6ca88b241d5 ("trace_uprobe: support reference counter in fd-based uprobe")

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-16-andrii@kernel.org

selftests/bpf: Add bpf_cookie selftests for high-level APIs

Add selftest with few subtests testing proper bpf_cookie usage.

Kprobe and uprobe subtests are pretty straightforward and just validate that
the same BPF program attached with different bpf_cookie will be triggered with
those different bpf_cookie values.

Tracepoint subtest is a bit more interesting, as it is the only
perf_event-based BPF hook that shares bpf_prog_array between multiple
perf_events internally. This means that the same BPF program can't be attached
to the same tracepoint multiple times. So we have 3 identical copies. This
arrangement allows to test bpf_prog_array_copy()'s handling of bpf_prog_array
list manipulation logic when programs are attached and detached. The test
validates that bpf_cookie isn't mixed up and isn't lost during such list
manipulations.

Perf_event subtest validates that two BPF links can be created against the
same perf_event (but not at the same time, only one BPF program can be
attached to perf_event itself), and that for each we can specify different
bpf_cookie value.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-15-andrii@kernel.org

selftests/bpf: Extract uprobe-related helpers into trace_helpers.{c,h}

Extract two helpers used for working with uprobes into trace_helpers.{c,h} to
be re-used between multiple uprobe-using selftests. Also rename get_offset()
into more appropriate get_uprobe_offset().

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-14-andrii@kernel.org

selftests/bpf: Test low-level perf BPF link API

Add tests utilizing low-level bpf_link_create() API to create perf BPF link.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-13-andrii@kernel.org

libbpf: Add bpf_cookie to perf_event, kprobe, uprobe, and tp attach APIs

Wire through bpf_cookie for all attach APIs that use perf_event_open under the
hood:
  - for kprobes, extend existing bpf_kprobe_opts with bpf_cookie field;
  - for perf_event, uprobe, and tracepoint APIs, add their _opts variants and
    pass bpf_cookie through opts.

For kernel that don't support BPF_LINK_CREATE for perf_events, and thus
bpf_cookie is not supported either, return error and log warning for user.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-12-andrii@kernel.org

libbpf: Add bpf_cookie support to bpf_link_create() API

Add ability to specify bpf_cookie value when creating BPF perf link with
bpf_link_create() low-level API.

Given BPF_LINK_CREATE command is growing and keeps getting new fields that are
specific to the type of BPF_LINK, extend libbpf side of bpf_link_create() API
and corresponding OPTS struct to accomodate such changes. Add extra checks to
prevent using incompatible/unexpected combinations of fields.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-11-andrii@kernel.org

libbpf: Use BPF perf link when supported by kernel

Detect kernel support for BPF perf link and prefer it when attaching to
perf_event, tracepoint, kprobe/uprobe. Underlying perf_event FD will be kept
open until BPF link is destroyed, at which point both perf_event FD and BPF
link FD will be closed.

This preserves current behavior in which perf_event FD is open for the
duration of bpf_link's lifetime and user is able to "disconnect" bpf_link from
underlying FD (with bpf_link__disconnect()), so that bpf_link__destroy()
doesn't close underlying perf_event FD.When BPF perf link is used, disconnect
will keep both perf_event and bpf_link FDs open, so it will be up to
(advanced) user to close them. This approach is demonstrated in bpf_cookie.c
selftests, added in this patch set.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-10-andrii@kernel.org

libbpf: Remove unused bpf_link's destroy operation, but add dealloc

bpf_link->destroy() isn't used by any code, so remove it. Instead, add ability
to override deallocation procedure, with default doing plain free(link). This
is necessary for cases when we want to "subclass" struct bpf_link to keep
extra information, as is the case in the next patch adding struct
bpf_link_perf.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-9-andrii@kernel.org

libbpf: Re-build libbpf.so when libbpf.map changes

Ensure libbpf.so is re-built whenever libbpf.map is modified. Without this,
changes to libbpf.map are not detected and versioned symbols mismatch error
will be reported until `make clean && make` is used, which is a suboptimal
developer experience.

Fixes: 306b267cb3c4 ("libbpf: Verify versioned symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-8-andrii@kernel.org

bpf: Add bpf_get_attach_cookie() BPF helper to access bpf_cookie value

Add new BPF helper, bpf_get_attach_cookie(), which can be used by BPF programs
to get access to a user-provided bpf_cookie value, specified during BPF
program attachment (BPF link creation) time.

Naming is hard, though. With the concept being named "BPF cookie", I've
considered calling the helper:
  - bpf_get_cookie() -- seems too unspecific and easily mistaken with socket
    cookie;
  - bpf_get_bpf_cookie() -- too much tautology;
  - bpf_get_link_cookie() -- would be ok, but while we create a BPF link to
    attach BPF program to BPF hook, it's still an "attachment" and the
    bpf_cookie is associated with BPF program attachment to a hook, not a BPF
    link itself. Technically, we could support bpf_cookie with old-style
    cgroup programs.So I ultimately rejected it in favor of
    bpf_get_attach_cookie().

Currently all perf_event-backed BPF program types support
bpf_get_attach_cookie() helper. Follow-up patches will add support for
fentry/fexit programs as well.

While at it, mark bpf_tracing_func_proto() as static to make it obvious that
it's only used from within the kernel/trace/bpf_trace.c.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-7-andrii@kernel.org

bpf: Allow to specify user-provided bpf_cookie for BPF perf links

Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).

This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).

This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.

Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org

bpf: Implement minimal BPF perf link

Introduce a new type of BPF link - BPF perf link. This brings perf_event-based
BPF program attachments (perf_event, tracepoints, kprobes, and uprobes) into
the common BPF link infrastructure, allowing to list all active perf_event
based attachments, auto-detaching BPF program from perf_event when link's FD
is closed, get generic BPF link fdinfo/get_info functionality.

BPF_LINK_CREATE command expects perf_event's FD as target_fd. No extra flags
are currently supported.

Force-detaching and atomic BPF program updates are not yet implemented, but
with perf_event-based BPF links we now have common framework for this without
the need to extend ioctl()-based perf_event interface.

One interesting consideration is a new value for bpf_attach_type, which
BPF_LINK_CREATE command expects. Generally, it's either 1-to-1 mapping from
bpf_attach_type to bpf_prog_type, or many-to-1 mapping from a subset of
bpf_attach_types to one bpf_prog_type (e.g., see BPF_PROG_TYPE_SK_SKB or
BPF_PROG_TYPE_CGROUP_SOCK). In this case, though, we have three different
program types (KPROBE, TRACEPOINT, PERF_EVENT) using the same perf_event-based
mechanism, so it's many bpf_prog_types to one bpf_attach_type. I chose to
define a single BPF_PERF_EVENT attach type for all of them and adjust
link_create()'s logic for checking correspondence between attach type and
program type.

The alternative would be to define three new attach types (e.g., BPF_KPROBE,
BPF_TRACEPOINT, and BPF_PERF_EVENT), but that seemed like unnecessary overkill
and BPF_KPROBE will cause naming conflicts with BPF_KPROBE() macro, defined by
libbpf. I chose to not do this to avoid unnecessary proliferation of
bpf_attach_type enum values and not have to deal with naming conflicts.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-5-andrii@kernel.org

bpf: Refactor perf_event_set_bpf_prog() to use struct bpf_prog input

Make internal perf_event_set_bpf_prog() use struct bpf_prog pointer as an
input argument, which makes it easier to re-use for other internal uses
(coming up for BPF link in the next patch). BPF program FD is not as
convenient and in some cases it's not available. So switch to struct bpf_prog,
move out refcounting outside and let caller do bpf_prog_put() in case of an
error. This follows the approach of most of the other BPF internal functions.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-4-andrii@kernel.org

bpf: Refactor BPF_PROG_RUN_ARRAY family of macros into functions

Similar to BPF_PROG_RUN, turn BPF_PROG_RUN_ARRAY macros into proper functions
with all the same readability and maintainability benefits. Making them into
functions required shuffling around bpf_set_run_ctx/bpf_reset_run_ctx
functions. Also, explicitly specifying the type of the BPF prog run callback
required adjusting __bpf_prog_run_save_cb() to accept const void *, casted
internally to const struct sk_buff.

Further, split out a cgroup-specific BPF_PROG_RUN_ARRAY_CG and
BPF_PROG_RUN_ARRAY_CG_FLAGS from the more generic BPF_PROG_RUN_ARRAY due to
the differences in bpf_run_ctx used for those two different use cases.

I think BPF_PROG_RUN_ARRAY_CG would benefit from further refactoring to accept
struct cgroup and enum bpf_attach_type instead of bpf_prog_array, fetching
cgrp->bpf.effective[type] and RCU-dereferencing it internally. But that
required including include/linux/cgroup-defs.h, which I wasn't sure is ok with
everyone.

The remaining generic BPF_PROG_RUN_ARRAY function will be extended to
pass-through user-provided context value in the next patch.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-3-andrii@kernel.org

bpf: Refactor BPF_PROG_RUN into a function

Turn BPF_PROG_RUN into a proper always inlined function. No functional and
performance changes are intended, but it makes it much easier to understand
what's going on with how BPF programs are actually get executed. It's more
obvious what types and callbacks are expected. Also extra () around input
parameters can be dropped, as well as `__` variable prefixes intended to avoid
naming collisions, which makes the code simpler to read and write.

This refactoring also highlighted one extra issue. BPF_PROG_RUN is both
a macro and an enum value (BPF_PROG_RUN == BPF_PROG_TEST_RUN). Turning
BPF_PROG_RUN into a function causes naming conflict compilation error. So
rename BPF_PROG_RUN into lower-case bpf_prog_run(), similar to
bpf_prog_run_xdp(), bpf_prog_run_pin_on_cpu(), etc. All existing callers of
BPF_PROG_RUN, the macro, are switched to bpf_prog_run() explicitly.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-2-andrii@kernel.org

bpf, tests: Fix spelling mistake "shoft" -> "shift"

There is a spelling mistake in a literal string. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815213950.47751-1-colin.king@canonical.com

Merge branch 'BPF iterator for UNIX domain socket.'

Kuniyuki Iwashima says:

====================

This patch set adds BPF iterator support for UNIX domain socket.  The first
patch implements it, and the second adds "%c" support for BPF_SEQ_PRINTF().

Thanks to Yonghong Song for the fix [0] for the LLVM code gen.  The fix
prevents the LLVM compiler from transforming the loop exit condition '<' to
'!=', where the upper bound is not a constant.  The transformation leads
the verifier to interpret it as an infinite loop.

And thanks to Andrii Nakryiko for its workaround [1].

[0] https://reviews.llvm.org/D107483
[1] https://lore.kernel.org/netdev/CAEf4BzZ3sVx1m1mOCcPcuVPiY6cWEAO=6VGHDiXEs9ZVD-RoLg@mail.gmail.com/

Changelog:
  v6:
  - Align the header "Inde" column
  - Change int vars to __u64 not to break test_progs-no_alu32
  - Move the if statement into the for loop not to depend on the fix [0]
  - Drop the README change
  - Modify "%c" positive test patterns

  v5:
  https://lore.kernel.org/netdev/20210812164557.79046-1-kuniyu@amazon.co.jp/
  - Align header line of bpf_iter_unix.c
  - Add test for "%c"

  v4:
  https://lore.kernel.org/netdev/20210810092807.13190-1-kuniyu@amazon.co.jp/
  - Check IS_BUILTIN(CONFIG_UNIX)
  - Support "%c" in BPF_SEQ_PRINTF()
  - Uncomment the code to print the name of the abstract socket
  - Mention the LLVM fix in README.rst
  - Remove the 'aligned' attribute in bpf_iter.h
  - Keep the format string on a single line

  v3:
  https://lore.kernel.org/netdev/20210804070851.97834-1-kuniyu@amazon.co.jp/
  - Export some functions for CONFIG_UNIX=m

  v2:
  https://lore.kernel.org/netdev/20210803011110.21205-1-kuniyu@amazon.co.jp/
  - Implement bpf_iter specific seq_ops->stop()
  - Add bpf_iter__unix in bpf_iter.h
  - Move common definitions in selftest to bpf_tracing_net.h
  - Include the code for abstract UNIX domain socket as comment in selftest
  - Use ASSERT_OK_PTR() instead of CHECK()
  - Make ternary operators on single line

  v1:
  https://lore.kernel.org/netdev/20210729233645.4869-1-kuniyu@amazon.co.jp/
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

selftest/bpf: Extend the bpf_snprintf() test for "%c".

This patch adds various "positive" patterns for "%c" and two "negative"
patterns for wide character.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210814015718.42704-5-kuniyu@amazon.co.jp

selftest/bpf: Implement sample UNIX domain socket iterator program.

The iterator can output almost the same result compared to /proc/net/unix.
The header line is aligned, and the Inode column uses "%8lu" because "%5lu"
can be easily overflown.

  # cat /sys/fs/bpf/unix
  Num               RefCount Protocol Flags    Type St    Inode Path
  ffff963c06689800: 00000002 00000000 00010000 0001 01    18697 private/defer
  ffff963c7c979c00: 00000002 00000000 00000000 0001 01   598245 @Hello@World@

  # cat /proc/net/unix
  Num       RefCount Protocol Flags    Type St Inode Path
  ffff963c06689800: 00000002 00000000 00010000 0001 01 18697 private/defer
  ffff963c7c979c00: 00000002 00000000 00000000 0001 01 598245 @Hello@World@

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210814015718.42704-4-kuniyu@amazon.co.jp

bpf: Support "%c" in bpf_bprintf_prepare().

/proc/net/unix uses "%c" to print a single-byte character to escape '\0' in
the name of the abstract UNIX domain socket. The following selftest uses
it, so this patch adds support for "%c". Note that it does not support
wide character ("%lc" and "%llc") for simplicity.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210814015718.42704-3-kuniyu@amazon.co.jp

bpf: af_unix: Implement BPF iterator for UNIX domain socket.

This patch implements the BPF iterator for the UNIX domain socket.

Currently, the batch optimisation introduced for the TCP iterator in the
commit 04c7820b776f ("bpf: tcp: Bpf iter batching and lock_sock") is not
used for the UNIX domain socket. It will require replacing the big lock
for the hash table with small locks for each hash list not to block other
processes.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210814015718.42704-2-kuniyu@amazon.co.jp

samples/bpf: Define MAX_ENTRIES instead of a magic number in offwaketime

Define MAX_ENTRIES instead of using 10000 as a magic number in various
places.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210815065013.15411-1-falakreyaz@gmail.com

Merge branch 'bpf: Allow bpf_get_netns_cookie in BPF_PROG_TYPE_CGROUP_SOCKOPT'

Stanislav Fomichev says:

====================

We'd like to be able to identify netns from setsockopt hooks
to be able to do the enforcement of some options only in the
"initial" netns (to give users the ability to create clear/isolated
sandboxes if needed without any enforcement by doing unshare(net)).

v3:
- remove extra 'ctx->skb == NULL' check (Martin KaFai Lau)
- rework test to make sure the helper is really called, not just
verified

v2:
- add missing CONFIG_NET
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

selftests/bpf: Verify bpf_get_netns_cookie in BPF_PROG_TYPE_CGROUP_SOCKOPT

Add extra calls to sockopt_sk.c.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210813230530.333779-3-sdf@google.com

bpf: Allow bpf_get_netns_cookie in BPF_PROG_TYPE_CGROUP_SOCKOPT

This is similar to existing BPF_PROG_TYPE_CGROUP_SOCK
and BPF_PROG_TYPE_CGROUP_SOCK_ADDR.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210813230530.333779-2-sdf@google.com

selftests/bpf: Fix test_core_autosize on big-endian machines

The "probed" part of test_core_autosize copies an integer using
bpf_core_read() into an integer of a potentially different size.
On big-endian machines a destination offset is required for this to
produce a sensible result.

Fixes: 888d83b961f6 ("selftests/bpf: Validate libbpf's auto-sizing of LD/ST/STX instructions")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210812224814.187460-1-iii@linux.ibm.com

libbpf: Support weak typed ksyms.

Currently weak typeless ksyms have default value zero, when they don't
exist in the kernel. However, weak typed ksyms are rejected by libbpf
if they can not be resolved. This means that if a bpf object contains
the declaration of a nonexistent weak typed ksym, it will be rejected
even if there is no program that references the symbol.

Nonexistent weak typed ksyms can also default to zero just like
typeless ones. This allows programs that access weak typed ksyms to be
accepted by verifier, if the accesses are guarded. For example,

extern const int bpf_link_fops3 __ksym __weak;

/* then in BPF program */

if (&bpf_link_fops3) {
/* use bpf_link_fops3 */
}

If actual use of nonexistent typed ksym is not guarded properly,
verifier would see that register is not PTR_TO_BTF_ID and wouldn't
allow to use it for direct memory reads or passing it to BPF helpers.

Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210812003819.2439037-1-haoluo@google.com

selftests/bpf: Fix running of XDP bonding tests

An "innocent" cleanup in the last version of the XDP bonding patchset moved
the "test__start_subtest" calls to the test main function, but I forgot to
reverse the condition, which lead to all tests being skipped. Fix it.

Fixes: 6aab1c81b98a ("selftests/bpf: Add tests for XDP bonding")
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210811123627.20223-1-joamaki@gmail.com

net: in_irq() cleanup

Replace the obsolete and ambiguos macro in_irq() with new
macro in_hardirq().

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Link: https://lore.kernel.org/r/20210813145749.86512-1-changbin.du@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net, bonding: Disallow vlan+srcmac with XDP

The new vlan+srcmac xmit policy is not implementable with XDP since
in many cases the 802.1Q payload is not present in the packet. This
can be for example due to hardware offload or in the case of veth
due to use of skbuffs internally.

This also fixes the NULL deref with the vlan+srcmac xmit policy
reported by Jonathan Toppins by additionally checking the skb
pointer.

Fixes: a815bde56b15 ("net, bonding: Refactor bond_xmit_hash for use with xdp_buff")
Reported-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20210812145241.12449-1-joamaki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

af_unix: fix holding spinlock in oob handling

syzkaller found that OOB code was holding spinlock
while calling a function in which it could sleep.

Reported-by: syzbot+8760ca6c1ee783ac4abd@syzkaller.appspotmail.com
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Link: https://lore.kernel.org/r/20210811220652.567434-1-Rao.Shoaib@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netdev/net

Conflicts:

drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
  9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp")
  9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins")
  099fdeda659d ("bnxt_en: Event handler for PPS events")

kernel/bpf/helpers.c
include/linux/bpf-cgroup.h
  a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()")
  c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current")

drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
  5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray")
  2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer")

MAINTAINERS
  7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo")
  7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-5.14-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, bpf, can and
  ieee802154.

  The size of this is pretty normal, but we got more fixes for 5.14
  changes this week than last week. Nothing major but the trend is the
  opposite of what we like. We'll see how the next week goes..

  Current release - regressions:

   - r8169: fix ASPM-related link-up regressions

   - bridge: fix flags interpretation for extern learn fdb entries

   - phy: micrel: fix link detection on ksz87xx switch

   - Revert "tipc: Return the correct errno code"

   - ptp: fix possible memory leak caused by invalid cast

  Current release - new code bugs:

   - bpf: add missing bpf_read_[un]lock_trace() for syscall program

   - bpf: fix potentially incorrect results with bpf_get_local_storage()

   - page_pool: mask the page->signature before the checking, avoid dma
     mapping leaks

   - netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps

   - bnxt_en: fix firmware interface issues with PTP

   - mlx5: Bridge, fix ageing time

  Previous releases - regressions:

   - linkwatch: fix failure to restore device state across
     suspend/resume

   - bareudp: fix invalid read beyond skb's linear data

  Previous releases - always broken:

   - bpf: fix integer overflow involving bucket_size

   - ppp: fix issues when desired interface name is specified via
     netlink

   - wwan: mhi_wwan_ctrl: fix possible deadlock

   - dsa: microchip: ksz8795: fix number of VLAN related bugs

   - dsa: drivers: fix broken backpressure in .port_fdb_dump

   - dsa: qca: ar9331: make proper initial port defaults

  Misc:

   - bpf: add lockdown check for probe_write_user helper

   - netfilter: conntrack: remove offload_pickup sysctl before 5.14 is
     out

   - netfilter: conntrack: collect all entries in one cycle,
     heuristically slow down garbage collection scans on idle systems to
     prevent frequent wake ups"

* tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
  vsock/virtio: avoid potential deadlock when vsock device remove
  wwan: core: Avoid returning NULL from wwan_create_dev()
  net: dsa: sja1105: unregister the MDIO buses during teardown
  Revert "tipc: Return the correct errno code"
  net: mscc: Fix non-GPL export of regmap APIs
  net: igmp: increase size of mr_ifc_count
  MAINTAINERS: switch to my OMP email for Renesas Ethernet drivers
  tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packets
  net: pcs: xpcs: fix error handling on failed to allocate memory
  net: linkwatch: fix failure to restore device state across suspend/resume
  net: bridge: fix memleak in br_add_if()
  net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
  net: bridge: fix flags interpretation for extern learn fdb entries
  net: dsa: sja1105: fix broken backpressure in .port_fdb_dump
  net: dsa: lantiq: fix broken backpressure in .port_fdb_dump
  net: dsa: lan9303: fix broken backpressure in .port_fdb_dump
  net: dsa: hellcreek: fix broken backpressure in .port_fdb_dump
  bpf, core: Fix kernel-doc notation
  net: igmp: fix data-race in igmp_ifc_timer_expire()
  net: Fix memory leak in ieee802154_raw_deliver
  ...

Merge tag 'ceph-for-5.14-rc6' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"A patch to avoid a soft lockup in ceph_check_delayed_caps() from Luis
  and a reference handling fix from Jeff that should address some memory
  corruption reports in the snaprealm area.

  Both marked for stable"

* tag 'ceph-for-5.14-rc6' of git://github.com/ceph/ceph-client:
  ceph: take snap_empty_lock atomically with snaprealm refcount change
  ceph: reduce contention in ceph_check_delayed_caps()

Merge tag 'drm-fixes-2021-08-13' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Another week, another set of pretty regular fixes, nothing really
  stands out too much.

  amdgpu:
   - Yellow carp update
   - RAS EEPROM fixes
   - BACO/BOCO fixes
   - Fix a memory leak in an error path
   - Freesync fix
   - VCN harvesting fix
   - Display fixes

  i915:
   - GVT fix for Windows VM hang.
   - Display fix of 12 BPC bits for display 12 and newer.
   - Don't try to access some media register for fused off domains.
   - Fix kerneldoc build warnings.

  mediatek:
   - Fix dpi bridge bug.
   - Fix cursor plane no update.

  meson:
   - Fix colors when booting with HDR"

* tag 'drm-fixes-2021-08-13' of git://anongit.freedesktop.org/drm/drm:
  drm/doc/rfc: drop lmem uapi section
  drm/i915: Only access SFC_DONE when media domain is not fused off
  drm/i915/display: Fix the 12 BPC bits for PIPE_MISC reg
  drm/amd/display: use GFP_ATOMIC in amdgpu_dm_irq_schedule_work
  drm/amd/display: Remove invalid assert for ODM + MPC case
  drm/amd/pm: bug fix for the runtime pm BACO
  drm/amdgpu: handle VCN instances when harvesting (v2)
  drm/meson: fix colour distortion from HDR set during vendor u-boot
  drm/i915/gvt: Fix cached atomics setting for Windows VM
  drm/amdgpu: Add preferred mode in modeset when freesync video mode's enabled.
  drm/amd/pm: Fix a memory leak in an error handling path in 'vangogh_tables_init()'
  drm/amdgpu: don't enable baco on boco platforms in runpm
  drm/amdgpu: set RAS EEPROM address from VBIOS
  drm/amd/pm: update smu v13.0.1 firmware header
  drm/mediatek: Fix cursor plane no update
  drm/mediatek: mtk-dpi: Set out_fmt from config if not the last bridge
  drm/mediatek: dpi: Fix NULL dereference in mtk_dpi_bridge_atomic_check

dt-bindings: net: qcom,ipa: make imem interconnect optional

On some newer SoCs, the interconnect between IPA and SoC internal
memory (imem) is not used. Update the binding to indicate that
having just the memory and config interconnects is another allowed
configuration.

Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210811141802.2635424-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ipa: always inline ipa_aggr_granularity_val()

It isn't required, but all callers of ipa_aggr_granularity_val()
pass a constant value (IPA_AGGR_GRANULARITY) as the usec argument.
Two of those callers are in ipa_validate_build(), with the result
being passed to BUILD_BUG_ON().

Evidently the "sparc64-linux-gcc" compiler (at least) doesn't always
inline ipa_aggr_granularity_val(), so the result of the function is
not constant at compile time, and that leads to build errors.

Define the function with the __always_inline attribute to avoid the
errors. We can see by inspection that the value passed is never
zero, so we can just remove its WARN_ON() call.

Fixes: 5bc5588466a1f ("net: ipa: use WARN_ON() rather than assertions")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210811135948.2634264-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'drm-misc-fixes-2021-08-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Short summary of fixes pull:

* meson: Fix colors when booting with HDR

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YRTb+qUuBYWjJDVg@linux-uq9g.fritz.box

Merge tag 'drm-intel-fixes-2021-08-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- GVT fix for Windows VM hang.
- Display fix of 12 BPC bits for display 12 and newer.
- Don't try to access some media register for fused off domains.
- Fix kerneldoc build warnings.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YRU/hnQ1sNr+j37x@intel.com

Merge tag 'ieee802154-for-davem-2021-08-12' of git://git./linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
ieee802154 for net 2021-08-12

Mostly fixes coming from bot reports. Dongliang Mu tackled some syzkaller
reports in hwsim again and Takeshi Misawa a memory leak  in  ieee802154 raw.

* tag 'ieee802154-for-davem-2021-08-12' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
  net: Fix memory leak in ieee802154_raw_deliver
  ieee802154: hwsim: fix GPF in hwsim_new_edge_nl
  ieee802154: hwsim: fix GPF in hwsim_set_edge_lqi
====================

Link: https://lore.kernel.org/r/20210812183912.1663996-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vsock/virtio: avoid potential deadlock when vsock device remove

There's a potential deadlock case when remove the vsock device or
process the RESET event:

  vsock_for_each_connected_socket:
      spin_lock_bh(&vsock_table_lock) ----------- (1)
      ...
          virtio_vsock_reset_sock:
              lock_sock(sk) --------------------- (2)
      ...
      spin_unlock_bh(&vsock_table_lock)

lock_sock() may do initiative schedule when the 'sk' is owned by
other thread at the same time, we would receivce a warning message
that "scheduling while atomic".

Even worse, if the next task (selected by the scheduler) try to
release a 'sk', it need to request vsock_table_lock and the deadlock
occur, cause the system into softlockup state.
  Call trace:
   queued_spin_lock_slowpath
   vsock_remove_bound
   vsock_remove_sock
   virtio_transport_release
   __vsock_release
   vsock_release
   __sock_release
   sock_close
   __fput
   ____fput

So we should not require sk_lock in this case, just like the behavior
in vhost_vsock or vmci.

Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko")
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210812053056.1699-1-longpeng2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'for-v5.14' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull ucounts fix from Eric Biederman:
"This fixes the ucount sysctls on big endian architectures.

  The counts were expanded to be longs instead of ints, and the sysctl
  code was overlooked, so only the low 32bit were being processed. On
  litte endian just processing the low 32bits is fine, but on 64bit big
  endian processing just the low 32bits results in the high order bits
  instead of the low order bits being processed and nothing works
  proper.

  This change took a little bit to mature as we have the SYSCTL_ZERO,
  and SYSCTL_INT_MAX macros that are only usable for sysctls operating
  on ints, but unfortunately are not obviously broken. Which resulted in
  the versions of this change working on big endian and not on little
  endian, because the int SYSCTL_ZERO when extended 64bit wound up being
  0x100000000. So we only allowed values greater than 0x100000000 and
  less than 0faff. Which unfortunately broken everything that tried to
  set the sysctls. (First reported with the windows subsystem for
  linux).

  I have tested this on x86_64 64bit after first reproducing the
  problems with the earlier version of this change, and then verifying
  the problems do not exist when we use appropriate long min and max
  values for extra1 and extra2"

* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: add missing data type changes

Merge tag 'sound-5.14-rc6' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"This seems to be a usual bump in the middle, containing lots of
  pending ASoC fixes:

   - Yet another PCM mmap regression fix

   - Fix for ASoC DAPM prefix handling

   - Various cs42l42 codec fixes

   - PCM buffer reference fixes in a few ASoC drivers

   - Fixes for ASoC SOF, AMD, tlv320, WM

   - HD-audio quirks"

* tag 'sound-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 650 G8 Notebook PC
  ALSA: pcm: Fix mmap breakage without explicit buffer setup
  ALSA: hda: Add quirk for ASUS Flow x13
  ASoC: cs42l42: Fix mono playback
  ASoC: cs42l42: Constrain sample rate to prevent illegal SCLK
  ASoC: cs42l42: Fix LRCLK frame start edge
  ASoC: cs42l42: PLL must be running when changing MCLK_SRC_SEL
  ASoC: cs42l42: Remove duplicate control for WNF filter frequency
  ASoC: cs42l42: Fix inversion of ADC Notch Switch control
  ASoC: SOF: Intel: hda-ipc: fix reply size checking
  ASoC: SOF: Intel: Kconfig: fix SoundWire dependencies
  ASoC: amd: Fix reference to PCM buffer address
  ASoC: nau8824: Fix open coded prefix handling
  ASoC: kirkwood: Fix reference to PCM buffer address
  ASoC: uniphier: Fix reference to PCM buffer address
  ASoC: xilinx: Fix reference to PCM buffer address
  ASoC: intel: atom: Fix reference to PCM buffer address
  ASoC: cs42l42: Fix bclk calculation for mono
  ASoC: cs42l42: Don't allow SND_SOC_DAIFMT_LEFT_J
  ASoC: cs42l42: Correct definition of ADC Volume control
  ...

wwan: core: Avoid returning NULL from wwan_create_dev()

Make wwan_create_dev() to return either valid or error pointer,
In some cases it may return NULL. Prevent this by converting
it to the respective error pointer.

Fixes: 9a44c1cc6388 ("net: Add a WWAN subsystem")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20210811124845.10955-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mlx5-updates-2021-08-11' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 updates 2021-08-11

This series provides misc updates to mlx5.
For more information please see tag log below.

Please pull and let me know if there is any problem.

mlx5-updates-2021-08-11

Misc. cleanup for mlx5.

1) Typos and use of netdev_warn()
2) smatch cleanup
3) Minor fix to inner TTC table creation
4) Dynamic capability cache allocation
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'dsa-cross-chip-notifiers'

Vladimir Oltean says:

====================
Improvements to the DSA tag_8021q cross-chip notifiers

This series improves cross-chip notifier error messages and addresses a
benign error message seen during reboot on a system with disjoint DSA
trees.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_8021q: don't broadcast during setup/teardown

Currently, on my board with multiple sja1105 switches in disjoint trees
described in commit f66a6a69f97a ("net: dsa: permit cross-chip bridging
between all trees in the system"), rebooting the board triggers the
following benign warnings:

[   12.345566] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 1088 deletion: -ENOENT
[   12.353804] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 2112 deletion: -ENOENT
[   12.362019] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 1089 deletion: -ENOENT
[   12.370246] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 2113 deletion: -ENOENT
[   12.378466] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 1090 deletion: -ENOENT
[   12.386683] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 2114 deletion: -ENOENT

Basically switch 1 calls dsa_tag_8021q_unregister, and switch 1's TX and
RX VLANs cannot be found on switch 2's CPU port.

But why would switch 2 even attempt to delete switch 1's TX and RX
tag_8021q VLANs from its CPU port? Well, because we use dsa_broadcast,
and it is supposed that it had added those VLANs in the first place
(because in dsa_port_tag_8021q_vlan_match, all CPU ports match
regardless of their tree index or switch index).

The two trees probe asynchronously, and when switch 1 probed, it called
dsa_broadcast which did not notify the tree of switch 2, because that
didn't probe yet. But during unbind, switch 2's tree _is_ probed, so it
_is_ notified of the deletion.

Before jumping to introduce a synchronization mechanism between the
probing across disjoint switch trees, let's take a step back and see
whether we _need_ to do that in the first place.

The RX and TX VLANs of switch 1 would be needed on switch 2's CPU port
only if switch 1 and 2 were part of a cross-chip bridge. And
dsa_tag_8021q_bridge_join takes care precisely of that (but if probing
was synchronous, the bridge_join would just end up bumping the VLANs'
refcount, because they are already installed by the setup path).

Since by the time the ports are bridged, all DSA trees are already set
up, and we don't need the tag_8021q VLANs of one switch installed on the
other switches during probe time, the answer is that we don't need to
fix the synchronization issue.

So make the setup and teardown code paths call dsa_port_notify, which
notifies only the local tree, and the bridge code paths call
dsa_broadcast, which let the other trees know as well.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: print more information when a cross-chip notifier fails

Currently this error message does not say a lot:

[   32.693498] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[   32.699725] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[   32.705931] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[   32.712139] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[   32.718347] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[   32.724554] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT

but in this form, it is immediately obvious (at least to me) what the
problem is, even without further looking at the code:

[   12.345566] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 1088 deletion: -ENOENT
[   12.353804] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 2112 deletion: -ENOENT
[   12.362019] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 1089 deletion: -ENOENT
[   12.370246] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 2113 deletion: -ENOENT
[   12.378466] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 1090 deletion: -ENOENT
[   12.386683] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 2114 deletion: -ENOENT

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm/doc/rfc: drop lmem uapi section

We still have quite a bit more work to do with overall reworking of
the ttm-based dg1 code, but the uapi stuff is now finalized with the
latest pull. So remove that.

This also fixes kerneldoc build warnings because we've included the
same headers in two places, resulting in sphinx complaining about
duplicated symbols. This regression has been created when we moved the
uapi definitions to the real include/uapi/ folder in 727ecd99a4c9
("drm/doc/rfc: drop the i915_gem_lmem.h header")

v2: Fix a few references that I missed, the htmldocs build took
forever.

Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by Stephen Rothwell <sfr@canb.auug.org.au> (v1)
References: https://lore.kernel.org/dri-devel/20210603193242.1ce99344@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 727ecd99a4c9 ("drm/doc/rfc: drop the i915_gem_lmem.h header")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810142748.1983271-1-daniel.vetter@ffwll.ch
(cherry picked from commit dae2d28832968751f7731336b560a4a84a197b76)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Only access SFC_DONE when media domain is not fused off

The SFC_DONE register lives within the corresponding VD0/VD2/VD4/VD6
forcewake domain and is not accessible if the vdbox in that domain is
fused off and the forcewake is not initialized.

This mistake went unnoticed because until recently we were using the
wrong register offset for the SFC_DONE register; once the register
offset was corrected, we started hitting errors like

<4> [544.989065] i915 0000:cc:00.0: Uninitialized forcewake domain(s) 0x80 accessed at 0x1ce000

on parts with fused-off vdbox engines.

Fixes: e50dbdbfd9fb ("drm/i915/tgl: Add SFC instdone to error state")
Fixes: 9c9c6d0ab08a ("drm/i915: Correct SFC_DONE register offset")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806174130.1058960-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit c5589bb5dccb0c5cb74910da93663f489589f3ce)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Changed Fixes tag to match the cherry-picked 82929a2140eb]

wwan: core: Unshadow error code returned by ida_alloc_range()

ida_alloc_range() may return other than -ENOMEM error code.
Unshadow it in the wwan_create_port().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm/i915/display: Fix the 12 BPC bits for PIPE_MISC reg

Till DISPLAY12 the PIPE_MISC bits 5-7 are used to set the
Dithering BPC, with valid values of 6, 8, 10 BPC.
For ADLP+ these bits are used to set the PORT OUTPUT BPC, with valid
values of: 6, 8, 10, 12 BPC, and need to be programmed whether
dithering is enabled or not.

This patch:
-corrects the bits 5-7 for PIPE MISC register for 12 BPC.
-renames the bits and mask to have generic names for these bits for
dithering bpc and port output bpc.

v3: Added a note for MIPI DSI which uses the PIPE_MISC for readout
for pipe_bpp. (Uma Shankar)

v2: Added 'display' to the subject and fixes tag. (Uma Shankar)

Fixes: 756f85cffef2 ("drm/i915/bdw: Broadwell has PIPEMISC")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811051857.109723-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 70418a68713c13da3f36c388087d0220b456a430)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

net: dsa: sja1105: unregister the MDIO buses during teardown

The call to sja1105_mdiobus_unregister is present in the error path but
absent from the main driver unbind path.

Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mt7530: fix VLAN traffic leaks again

When a port leaves a VLAN-aware bridge, the current code does not clear
other ports' matrix field bit. If the bridge is later set to VLAN-unaware
mode, traffic in the bridge may leak to that port.

Remove the VLAN filtering check in mt7530_port_bridge_leave.

Fixes: 474a2ddaa192 ("net: dsa: mt7530: fix VLAN traffic leaks")
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: nxp-tja11xx: log critical health state

TJA1102 provides interrupt notification for the critical health states
like overtemperature and undervoltage.

The overtemperature bit is set if package temperature is beyond 155C°.
This functionality was tested by heating the package up to 200C°

The undervoltage bit is set if supply voltage drops beyond some critical
threshold. Currently not tested.

In a typical use case, both of this events should be logged and stored
(or send to some remote system) for further investigations.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>