Retrieve build flags from pkg-config only once.

The pkg-config command used to retrieve the build flags for several
libraries in Linux, Tizen and Android builds was added to the C and
C++ command line flags as a shell "backtick" expression, e.g.:

  gcc ... `pkg-config glib-2.0 --cflags` ...

That caused pkg-config to be run for each and every source file
compilation command executed by SCons.  Doing so is an expensive
operation since it causes an additional process to be spawned to read
the same flags for each source file being compiled.

Just have SCons read them and merge them to the build environment
once!

Change-Id: I3120aef7929464c033c8dabf6ec0ca88e5b67f89
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/367
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Patrick Lankswert <patrick.lankswert@intel.com>

Removed carriage returns in middle of text and at line endings.

Depending on the editor or viewer, the carriage returns may not
be readily apparent.  To search for them via the command line
something like the following may be used:

  find . -name "*.[ch]" -o -name "*.cpp" | xargs grep -n $'\r' \
    | grep -v extlibs

Change-Id: Ifabf59b1becbd3d8c8cbfa6363c9bc9f5f3ab4e7
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/368
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
Reviewed-by: Patrick Lankswert <patrick.lankswert@intel.com>

Fix klocwork issues in C samples

Check "*targetString" pointer before using it.

Change-Id: I47223c9787f5c9855d5850db40da4637265bd2d7
Signed-off-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/361
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Added Vagrant config files that will create a build VM

As described in the tools/vagrant/README.md, Vagrant can use the
configuration provided in this commit to provision a build VM for building
IoTivity.

Change-Id: Ic2ae5a7bfc9e4274aa76be99a0807517f89c94b8
Signed-off-by: William Dieter <william.r.dieter@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/88
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Patrick Lankswert <patrick.lankswert@intel.com>
(cherry picked from commit 3b864d1ab9656a2570888b64b8384b406e9212c6)
Reviewed-on: https://gerrit.iotivity.org/gerrit/383
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Updated Doxygen @param for OCResourceResponse::setResourceRepresentation

The parameter was updated in a previous commit without updating the
Doxygen comments.

Change-Id: Ia6fc35d7a7ad8c6fd8a0d076aa21915813fe2820
Signed-off-by: William Dieter <william.r.dieter@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/352
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
(cherry picked from commit 50ef54a78a90638144db9fe55c1fb97b6196ff9b)
Reviewed-on: https://gerrit.iotivity.org/gerrit/356
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Guard against spurious wakeups in devicediscoveryclient.cpp

Like most condition variable implementations, std::condition_variable may
wake up spuriously, even though it is not signalled (see
http://en.cppreference.com/w/cpp/thread/condition_variable/wait).  Since
the intention of blocking on the std::condition_variable in main is to
wait forever, add a loop to block again after spurious wakeups.

Change-Id: I19b7ee13650b9b80250f935e2099119611fa61b3
Signed-off-by: William Dieter <william.r.dieter@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/355
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
(cherry picked from commit 73b122b0590bc350c1a451d7d05db86e3f0121d3)
Reviewed-on: https://gerrit.iotivity.org/gerrit/392

Guard against spurious wakeups in devicediscoveryserver.cpp

Like most condition variable implementations, std::condition_variable may
wake up spuriously, even though it is not signalled (see
http://en.cppreference.com/w/cpp/thread/condition_variable/wait).  Since
the intention of blocking on the std::condition_variable in main is to
wait forever, add a loop to block again after spurious wakeups.

Change-Id: I97e89a1ec95d6ba65eeb7daff861ee0a65d03a7e
Signed-off-by: William Dieter <william.r.dieter@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/357
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
(cherry picked from commit 5df6036cde74bf174d9d61b618d81f8d7034d6c4)
Reviewed-on: https://gerrit.iotivity.org/gerrit/391

Added resource/include/OCRepresentation.h to Doxyfile

OCRepresentation is passed as a paramter to documented API calls, so
presumably, it should be part of the public, documented API.

Change-Id: Ia17813b8ade749d0446d1ed4068f7e49d60d6ec4
Signed-off-by: William Dieter <william.r.dieter@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/351
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
(cherry picked from commit 9dcf248ecb99d3eb18fea0ca445818329f7d4e1e)
Reviewed-on: https://gerrit.iotivity.org/gerrit/393

[SSM] Fix console sample

1. Fix sample application while reading query string from console

Change-Id: I90076ad0711ce165293a4db159e5796f1b7c93ee
Signed-off-by: jk13 <jihyeok13.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/347
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
(cherry picked from commit 5d2e8e333eb30d38e636d329f03dda36a1189d9e)
Reviewed-on: https://gerrit.iotivity.org/gerrit/390
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix runtime error of ThingsManager API.

Some API and examples show runtime errors.
So we fixed runtime errors and issues.

Fix [IOT-324], [IOT-326], [IOT-336], [IOT-337]

Change-Id: I0f71b3a2243e4856203140aae71db473f4fa32ad
Signed-off-by: HyunJun Kim <hyunjun2.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/330
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
(cherry picked from commit 24b19311190ac247aee64809064f63c5c796384a)
Reviewed-on: https://gerrit.iotivity.org/gerrit/389
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Improve usability of Group Interface API.

GetActionSetFromString function has memory leak.
So we fix memory leak and improve usability of the function.

We call two function, ExtractKeyValueFromRequest and BuildActionSetFromString
to extract key and value from requset and get ActionSet object from string.

Fix [IOT-283]

Change-Id: Ie13dcd0afc168632d9a53ad27182d15a55c3aca0
Signed-off-by: HyunJun Kim <hyunjun2.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/308
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
(cherry picked from commit 061a9bc4c0ef896016ea94ebf17c18c55a28e799)
Reviewed-on: https://gerrit.iotivity.org/gerrit/387
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Improve external library management error handling

Change-Id: I2a0b7003f0bd2987fa101285977fa0621688017b
Signed-off-by: Caiwen Zhang<caiwen.zhang@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/327
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Patrick Lankswert <patrick.lankswert@intel.com>
(cherry picked from commit c824277b602590f2f4af8b553106b6913e62fad2)
Reviewed-on: https://gerrit.iotivity.org/gerrit/388
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Add missing LICENSE and NOTICE file to repository.

Change-Id: Ib47076ee53884cb4bd87cc822dff0437ca1deb9e
Signed-off-by: Patrick Lankswert <patrick.lankswert@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/283
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-by: Fred Cooper <fred.cooper@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
(cherry picked from commit a02e3f263c942496b5e1e05fb1d523b77d9e8500)
Reviewed-on: https://gerrit.iotivity.org/gerrit/386
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Adding OCRep destructor, various move activities

Apparently OCRepresentation's destructor was causing issues
in the JNI version.  Seemingly adding a virtual destructor to
the OCRepresentation is enough to cause this to go away.

Also adding move construction/assignment to our more expensive
types.

Change-Id: Icb3b6f25e268384b51126e18ec55fc5099c9b2f9
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/305
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Patrick Lankswert <patrick.lankswert@intel.com>
(cherry picked from commit b7a33ba1905fcef02c21532a944ddc0958a121af)
Reviewed-on: https://gerrit.iotivity.org/gerrit/385
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

[SSM] Fix SSM Sample App to handle invalid input for app menu (IOT-290)

Modify SSM Linux Sample App to to prevent unexpected input values

Change-Id: Ic9de6e894a44a903f02d60f6eeaf0fa9035e0e5a
Signed-off-by: Minji Park <minjii.park@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/315
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
(cherry picked from commit d37ac7328d1f6bf0fc8da65aac9af8b0edcdd904)
Reviewed-on: https://gerrit.iotivity.org/gerrit/384
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix  problem  for multiple api call

It is thread issue. So, add lock mechanism.
Fix [IOT-263]

Change-Id: Ic0fac30b1a4c0c305af607e5caa7c1afd21163b6
Signed-off-by: Jack Lee <jjack.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/243
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
(cherry picked from commit 522c05e82f1ccd3ae2cf4b4a63ec414f7ebcb8ce)
Reviewed-on: https://gerrit.iotivity.org/gerrit/381
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix infinite loop in GroupAction.

Fix infinite loop in FindAndDeleteActionSet function.

So we change the code.

Fix [IOT-282]

Change-Id: I23d3663ea32c5e56a456b013d4c697fcf0f886d2
Signed-off-by: HyunJun Kim <hyunjun2.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/286
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Tested-by: Uze Choi <uzchoi@samsung.com>
(cherry picked from commit 6a8ad4c43926df7541b414452ed57dbc9761137a)
Reviewed-on: https://gerrit.iotivity.org/gerrit/380
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Release notes for Feb 1st release

Change-Id: I046922a66eaa03b18482fb139986a439a49f568f
Signed-off-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/282
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
(cherry picked from commit 0d8fae69e903dffdd90ad2e8ff5a7cd58afb78da)
Reviewed-on: https://gerrit.iotivity.org/gerrit/379

Add API description of Things Manager.

joinGroup and findGroup function call were ambiguous
when join to a local(or remote) resource.
We provide more detail description of function for the user.

Fix [IOT-265],[IOT-267]

Change-Id: I43de1f6671dc73d0725bdc9c0e85ffca45878d2e
Signed-off-by: HyunJun Kim <hyunjun2.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/245
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
(cherry picked from commit a3c86a7a2d2fce37f68fd3cf738500e17480cbbe)
Reviewed-on: https://gerrit.iotivity.org/gerrit/378
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix GroupSync API of about GroupSync of Group feature.

Crash is occured when som api of ThingsManager is called multiple times.

Fix [IOT-261], [IOT-264], [IOT-268]

Change-Id: Iec1cb11c570357411351c69450ace91ea6fa3754
Signed-off-by: HyunJun Kim <hyunjun2.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/228
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
(cherry picked from commit 135e8386212533f4c62e892f0695c78d945f2879)
Reviewed-on: https://gerrit.iotivity.org/gerrit/375
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

[SSM] Fix issue about initializing SSM with invalid parameter (IOT-260)

Modify SoftSensorManager to return error code when initialized with invalid parameter

Change-Id: Ia0a54cd6e71321cbe2b4fd18352a2a609c20fabd
Signed-off-by: Minji Park <minjii.park@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/229
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
(cherry picked from commit ef380650f9c35120091c36b44c974c3d3712e91d)
Reviewed-on: https://gerrit.iotivity.org/gerrit/376
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Removed ocsocket

Removed obsolete ocsocket layer.
Moved OCDevAddr and helper functions to ocstack.
Note: OCDevAddr should be replaced in future (after CA merge).

Change-Id: I289232e12178fdc0c6ab1c5eeddc98c2f5e37531
Signed-off-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/334
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Doug Hudson <douglas.hudson@intel.com>
Reviewed-by: Habteab Yemane <habteab.l.yemane@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Added safety checks requested in code review.

The requests can be found here:https://gerrit.iotivity.org/gerrit/#/c/363.

Change-Id: Ied1f370c7f836f22d2a3e5e00150bc974a7d35b7
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/366
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: Doug Hudson <douglas.hudson@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Replaces SID related c++ code with c code

Parse payload with cJSON parser
Replace c++ set & pair data structure with c linklist
Demonstrate GET/PUT/POST on the resource in the resource list
Cleanup OC_LOG_V output
Collects all the resources present in  the clientResponse

Change-Id: Ib7e2047d25e0b2c805bae79b4246c1bbdbde8d8e
Signed-off-by: Shilpa Sodani <shilpa.a.sodani@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/297
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Tested-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix klocwork issue in c stack

Initialize grpEnd variable before using it.

Change-Id: I08f769545b0693af7bf775d34fbc427b1044af02
Signed-off-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/362
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix C/C++ samples interoperability

This fixes IOT-130

Made the "state" of light resource consistent across samples to be true/false instead of "on"/"off".
Fixed JSON payload parsing in occserver to fix seg fault on PUT request.

Change-Id: I4983c7ec20a274d0ae24f013cd7b7ec95c5815a6
Signed-off-by: Mandeep Shetty <mandeep.shetty@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/345
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Removed obsolete OC_WELL_KNOWN_PORT

Removed obsolete OC_WELL_KNOWN_PORT that was causing warnings.

Change-Id: I40034334e723b817818f80d9fedd60ed6ebcaf3a
Signed-off-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/360
Reviewed-by: Erich Keane <erich.keane@intel.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix memory leak when returning from method on error.

In ocstack.c, there was a method that could potentially malloc and then
return on error. I cleaned up this case. This fixes Rally TA5188.

Change-Id: I0ccd5259806c4e37b2ac73162f7ea0a7381fe4e7
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/363
Reviewed-by: Erich Keane <erich.keane@intel.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Doug Hudson <douglas.hudson@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fixed incorrect concatenation of responses.

As part of this work, a bug was fixed in the function HandleAggregateResponse where
responses were not being concatenated correctly.
This fixes a ToDo-CA task (TA4298).

Change-Id: I981947c2d64759d1850e093ecf5c069bc8c9106a
Signed-off-by: Doug Hudson <douglas.hudson@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/333
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Yamin Al-Mousa <yamin.s.al-mousa@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Created SConscripts for the C and C++ unit tests.

This change included making mods to <src_dir>/resource/SConscript to:

-call the C and C++ unit test SConscripts

-ensure that the Google Unit Test library and Hippo Mocking
library were installed in <src_dir>/extlibs.

Also made a mod to ocstack.c/OCInit( ) to check for invalid mode parameter
and to stacktests.cpp to change OCDoResource signature for CA.

Change-Id: I290d04a876de8c99076e71827d91b5216ffaf29e
Signed-off-by: Doug Hudson <douglas.hudson@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/292
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Fix  C samples format and style

Fix lines that exceed 100 characters limit and format style.

Change-Id: I86ac0fc29ae037034da6f643934484bce93fc52f
Signed-off-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/336
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Repaired a number of issues discovered while doing a code-review

I was poking through a general code review/testing out a SCA tool
and came up with/discovered a handful of potential bug-filled code.

In a few locations we were referring to a variable BEFORE testing for
validity which has some pretty nasty concequences.  I replaced usages
of strtok with strtok_r in a few places I came across it.  The IP
parsing code was a bit convoluted and unnecessary, so I made it more
clear.

Change-Id: If1157ca33d2fe176a4beac9b3e4b8a8090357751
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/346
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Doug Hudson <douglas.hudson@intel.com>
Reviewed-by: Patrick Lankswert <patrick.lankswert@intel.com>

Fixed missing public API comments

Additionally, aligned the comments properly.

Change-Id: I0eba40dcfe76062ba20e560084225f3ccf177271
Signed-off-by:Sudarshan Prasad <sudarshan.prasad@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/341
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Implement [] and iteration for OCRepresentation

Multiple requests have come in to be able to access the contents
of OCRepresentation in an easier to use manner.  This fix allows
OCRepresentation to be indexed using the [] operator and also
be iterated in an STL compliant fashion.

Additionally, this adds more than 40 tests for this functionality

Change-Id: Ibfc4bc61493324e118c4a6b67efc1d66e8b66b04
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/116
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
(cherry picked from commit 529bb98b884ca4db27b7659f966075a8680fa3c3)
Reviewed-on: https://gerrit.iotivity.org/gerrit/325
Tested-by: Sashi Penta <sashi.kumar.penta@intel.com>

Removed unused variables

This will prevent couple of warnings.

Change-Id: Iaae6d5a36c4ee91dee07346572ec7bde0961158c
Signed-off-by:Sudarshan Prasad <sudarshan.prasad@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/343
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Fixed sample when command line argument exceeds 3

Fix IOT Bug 306. Updated simpleclient to exit and display help
message when command line arguments exceeds 3

Change-Id: I06d0692f9ee34f3fe8f2b0d08005770983838028
Signed-off-by: Shilpa Sodani <shilpa.a.sodani@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/306
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Tested-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Removed libcoap and occoap

Libcoap and occoap were removed from RI layer because
libcoap was moved under connectivity abstraction layer.

Change-Id: Id10467a4f45de52a89b2a8113bd0f5981c542015
Signed-off-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/317
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Tested-by: Sashi Penta <sashi.kumar.penta@intel.com>

Removed OCGetInterfaceAddress

Removed obsolete OCGetInterfaceAddress and
cleaned up C Samples.

Note: OCSocket will eventually be completely removed
but not in this commit (due to dependencies)

Change-Id: Ie5af18518102be8595973fd1ff1d7dc4fdfd4007
Signed-off-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/319
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Updated security config blob for extensibility

Until now, security blob could contain only PSK credentials.
New features such as bootstrapping and certificate support would
require us to store different types of blob in configuration blob.
This change is an attempt to extend configuration blob format into
a TLV(Type-Length-Value) format which can be useful for multiple
purposes.

Change-Id: Icbc3d07ccae59579420276dbf5376f939c9bf7a4
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/242
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Doug Hudson <douglas.hudson@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Removed Cereal from Build Except where necessary

Only 3 file compilations (InProcClientWrapper.cpp, OCResourceRequest.cpp,
and OCRepresentation.cpp) actually need the cereal include, so this fix
removes it from everywhere else.  This will result in faster compile times.

Change-Id: I8f9c7b6c3991089189fe85fd8ebff6a9e1e2aa80
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/300
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-by: Patrick Lankswert <patrick.lankswert@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Tested-by: Uze Choi <uzchoi@samsung.com>

Fixed make_unique to work with C++14+ compilers

Previous solution didn't correctly import the make_unique from
C++14/1z when using the new compiler.  This ensures that OC::make_unique
will always work correctly.

Change-Id: Ibb7456f6375c5c16553bb76c71646ec911190c0f
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/299
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Added support in tinyDTLS to support rehandshake

As per RFC 6347 section 4.2.8, DTLS Server should support requests
from clients who have silently abandoned the existing association
and initiated a new handshake request by sending a ClientHello.
Code is updated to detect this scenario and delete the old
association when client successfully responds to HelloVerifyRequest.

Change-Id: I6e256921215c1a22e9e5013499c4dfd98659f8cc
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/120
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
(cherry picked from commit 6baf3d32af01b99cc56466e51b541a6be3a911f4)
Reviewed-on: https://gerrit.iotivity.org/gerrit/311

Fixed issue to pass PSK identity hint to application in callback

In cases (with PSK ciphersuite) where Server is sending
'PSK Identity Hint’ inside ServerKeyExchange message, DTLS library
is not passing the ‘identity hint’ inside ‘desc’ argument in
get_psk_info(DTLS_PSK_KEY, desc) callback. Instead, ‘desc’ contains
the identity of the client itself. The reason for this is that the
code inside dtls_send_client_key_exchange() method
overwrites the ‘identity hint’ received earlier.

Change-Id: Ibf447e3a6b33284118908a52aed4cf636038ab23
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/119
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
(cherry picked from commit 72a92249258601e2ab799628733afcb7c4c9b1e9)
Reviewed-on: https://gerrit.iotivity.org/gerrit/310

Fix errors on Arduino caused by proper initialization.

Initializing structs with "{0}" causes errors on Arduino where the
struct's first member is a non-primitive or something that can not be
properly set to "0" without a cast. I re-arranged the structs such that
the first member of the structs are of a primitive type or are typedef'd
as a primitive type.

Change-Id: Ib7ecced34ea85b1a8c9106c34e1d27890a4cf039
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/304
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Fixed OCLogger enum log levels to be legal

Double-underscores at the beginning of a token are reserved
for the compiler usage, so these values were removed.  I've also
altered the names a bit to make them look different enough so that
our users don't use them.

Finally, I made sure that they don't actually WORK, so that our
users won't be tempted to use them.

Change-Id: I3ae04ff32f01dfc6e0d89948a3b5b858157de6ab
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/298
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Patrick Lankswert <patrick.lankswert@intel.com>

Removed boost program_options from build

Program Options were only used for the ocicuc directory, however
that has been removed.  Therefore we don't need to use it to build
anymore.  Additionally, it was not included in any files or used
in any make files.

Change-Id: I12a195b28d549fc1ca86062f9628aca59def4a61
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/301
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-by: Patrick Lankswert <patrick.lankswert@intel.com>

Clean up the C samples

Update the URI in the samples for Unicast discovery and device discovery.

Change-Id: Ice2ec98bb33033743c17f3259e6a86380c0afc0e
Signed-off-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/285
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fixed Scons script changes to include CA flags in IoTivity build.

Include Linux Scons changes , Tizen scons build script changes.

Change-Id: I4a95f4887b9f4cb1c78d18659fd35fcf13584789
Signed-off-by: Ashok Channa <ashok.channa@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/270
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Removed warnings from calls to OC_LOG_BUFFER from within stack.

OC_LOG_BUFFER() expected "const uint8_t*" not "const unsigned char *".

Change-Id: I1e092abaf6af84ad66083c9bcf567d024e64b4d8
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/290
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Removed extraneous definitions of CA_INT in makefiles and sconscripts.

These definitions are no longer needed to run the RI layer on the CA
layer.

Change-Id: I9751b4d4d7ab0c35f2a277d4f100910070c976f6
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/291
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

RESET/ACK messages requirement to add additional data from CA .

 1) CA layer provide new CAResponseResult_t element to represent empty message.
2) RI can use 'SendResponse' for RESET and ACK(separated response)
with CAResponseResult and CA_Info_t->CAMessageType_t
 3) CA layer will add token information according to the message id of empty message. and
        ( The message id should be from CON type message. )

Signed-off-by: Ashok Channa <ashok.channa@samsung.com>
Change-Id: Ib926601cf9eb1693a0faedf9834d67f9ba0ccd50
Reviewed-on: https://gerrit.iotivity.org/gerrit/268
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fixed uninitialized memory/invalid memory issues

ocstack.c had a string being allocated without enough room, causing
readers/writers of the code to stomp on the next byte.  A few locations
had unintialized memory causing jumps to be made on uninitialized data.

Change-Id: Ifbccb463f1d09f7a09b752ee95cf84c9ae9a26c4
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/183
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Changes to make Linux build with CA_INT flag specified.

These changes also include some work to ensure better global cleanup
in makefiles. Some of this clean up work also overlaps with cleaning
Arduino outputs. This commit only affects makefile builds.

Change-Id: Idcfce740f1ec5766599a1f0aafb5e635647e7692
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Signed-off-by: Doug Hudson <douglas.hudson@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/129
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Made changes to support Arduino 1.5.8 with Connectivity Abstraction.

Since the CA Layer assumes version 1.5.8 of Arduino, our original
makefile implementation had to be updated to match this.

Since the directory structure is mildly different between 1.0.5 and
1.5.8, these changes were necessary that are found in
arduinomega.proerties.

Due to casting errors, source code was updated accordingly.

Change-Id: Ib8f68fa9dd4f14af2dfadbeac2f0d85cc0d292d4
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/34
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Code cleanup in Security sample apps

Removed CA_INT specific code. Updated OCInit calls to remove IP address
and port number.

Change-Id: Iba506b67e33060ea32b2430b443443305bfa0243
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/264
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Removed #ifdef CA_INTs and other code cleanup.

Change-Id: I664f0e2e500ba60ed35f2bd8c000ab3988672733
Signed-off-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/281
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix build issue

Fix CA branch build issue by removing ocsecurity.c from makefile
and ocsecurityinternal.h from ocstack.c files.

Change-Id: Ic0b5926b82d555fdabfa8679bde9b0e68aa75af3
Signed-off-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/266
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Build OICMiddle using Scons on CA branch

Change-Id: I63ad62700ee87b13c316fcf04d8e2c1fa42f4cc0
Signed-off-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/274
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: John Light <john.j.light@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix build warnings

Fix all build warnings in the CA branch. Build warnings due to
different pointer types for token, endpoint, and request info.

Change-Id: Ia29f8cb6f020457985ed1d6138e633eec412395e
Signed-off-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/259
Reviewed-by: Erich Keane <erich.keane@intel.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fixed OCDOResource interface

OCDoResource previously used uint8_t for connectivity type
This was replaced with OCConnectivityType

Change-Id: Ia5ddb4d72a7cd41786ffe27bfeae250ef21e6104
Signed-off-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/279
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Added appropriate comment to address a TODO

Change-Id: I8299a7e6c3e3617d02513e794d4ff0c01b669f51
Signed-off-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/275
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Resolve Klocwork c++ issues

Fixed memory leak issue in InProcClientWrapper.cpp
Fixed infinite loop issue in groupclient.cpp, groupserver.cpp,
simpleclient.cpp and simpleclientHQ

Change-Id: I27938f138a069a64ccf000afc16563dc5e9579e2
Signed-off-by: Shilpa Sodani <shilpa.a.sodani@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/255
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Reduce footprint by using string literals.

Original author: Ossama Othman <ossama.othman@intel.com>
This change is cherry picked from master to
connectivity-abstraction branch.

This change replaces the std::string based exception description
string constants in resource/include/StringConstants.h with
string literals instead.  Switching to string literals has a number of
advantages in this case:

- reduced start-up time for binaries that link against liboc
  since the static std::string constants no longer have to
  be initialized at run-time.
- the compiler is free to place the strings in read-only
  memory.
- reduced static and run-time footprint.

Please refer to original commit for more details:
https://gerrit.iotivity.org/gerrit/#/c/128/

Change-Id: I234545cdc288e71f4e7e8594e1634fcbdadafe70
Signed-off-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/273
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Fixed C++ unit tests for connectivity abstraction integration

Updated  C++ unit tests to reflect connectivity abstraction API changes.
Disabled tests that became irrelevant due to connectivity abstraction changes

Change-Id: Ic4d11c973592e27e4e17e26ab69b735c0e7c6d66
Signed-off-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/263
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Removing Internal calls to CA APIs in OCPlatform

Previously on the CA branch, we had APIs calling the CA APIs internally
with hard coded connectivity types.
Made changes in "service" project to enable using "#ifdef CA_INT" and
added the same in appropriate places.

Change-Id: Ie9f9faf9b7fa90556b4633528b0fa60de9df451c
Signed-off-by: omkar <omkar.m.hegde@intel.com>
Signed-off-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/154
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>

example: link to libraries using -L flag

executable will be able to load them
from standard paths (/usr/lib*/)

Change-Id: I0728c196b766ce55e7185dffb69d9790b5b065c5
Signed-off-by: Philippe Coval <philippe.coval@open.eurogiciel.org>
Reviewed-on: https://gerrit.iotivity.org/gerrit/246
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Erich Keane <erich.keane@intel.com>
Reviewed-by: John Light <john.j.light@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
(cherry picked from commit b274c49e7e566cb2cb550a6a0946850a15834c6d)
Reviewed-on: https://gerrit.iotivity.org/gerrit/262

Validate input parameters

Validate input parameters endpoint, protocol request,
and client response pointers before use them.

Change-Id: I47d084d19e523f695202782e02480f9f14fe529b
Signed-off-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/167
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix issue where logger files aren't built for Arduino on CA Branch.

The logger file has to be built with a C++ compiler so that we can
use Arduino's Serial functions as they are prepared in C++ world. With
a ".c" extension, the CA layer makefiles enforce it to be build with
a C compiler. We are forcing only the logger.c file to built for c++.

Change-Id: If2c17d15ebdb3b9942cb6c8391b4c2f7865b1fcd
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/187
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Updated RI layer to register 'GetDtlsPSKCredentials' as callback

RI layer now uses CARegisterDTLSCredentialsHandler method to register
callback to retrieve credentials. Also, moved security sources and
headers in separate directory as discussed previously for better
integration with CA layer.

Change-Id: I23f481a087d8400be0402ea2854fe3601580dfb6
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/241
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Doug Hudson <douglas.hudson@intel.com>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fixed makefile for unittests

Added connectivity abstraction to linker

Change-Id: Iae76e9423b58a29e704092bf65fc009341453f5c
Signed-off-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/258
Reviewed-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Log invalid request in HandleCARequests

Log a message when the number of header-options is incorrect and
the client recives any request in the HandleCARequests method.

Change-Id: I03e6522b4c306eebd89f581d47ed656d34923219
Signed-off-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/239
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Remove OCICUC from build and repo

The OCICUC library isn't properly being maintained and isn't really being
used, so it is being removed.

Change-Id: I613072d5256fd53c6d7ef179cd971356caf18d41
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/237
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Replaced (conditionally) OCCoAPToken with CAToken_t

Replaced old style CoAP tokens with CA tokens under #ifdef CA_INT.
Fixed token related warnings except occoap ones.

Change-Id: I413966570de9e43eab0a8c3311395d9c8e4d8de9
Signed-off-by: Yuliya Kamatkova <yuliya.kamatkova@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/118
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Removing csdk samples dependency on liboc

csdk samples are not dependent on liboc.
Updated SConscript files to remove the dependency.

Change-Id: Ic4e72ecf281c131f3ba28c19091edbf5456d8fb4
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/190
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fixed simpleclient crash caused by curResource being altered

The foundResource function is called asynchronously, and was written
in a way that was not thread safe. This fix adds a lock and exit logic
so that it works prooperly and only uses the first found curResource
that matches its requirements.

NOTE: This change (author: Erich Keane) is from 01.org.

Change-Id: I984ce1623ff491713ecf5d621f1283ebad33bfef
Signed-Off-by:Sudarshan Prasad<sudarshan.prasad@intel.com>
Signed-Off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/236
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>

Fix for seg fault due to double free

This fix is for IOT-285.
https://jira.iotivity.org/browse/IOT-285

Thanks to Sam for root causing the issue.

Change-Id: I92a53e312998684270f26c94db955195feafae86
Signed-Off-by:Sudarshan Prasad<sudarshan.prasad@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/234
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>

Added temporary fix for building with connectivity support

This is a temporary fix for IOT-281:
https://jira.iotivity.org/browse/IOT-281

Without this temporary fix, it would be unable to run
C and C++ samples with CA.

Change-Id: I02f6aedcfda7c05b296cb943e2b0f929896b0c02
Signed-Off-by:Sudarshan Prasad<sudarshan.prasad@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/233
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>

Update the multicast port and GenerateToken code in RI accordingly.

Update the Multicast port to 5683 accordingly in RI as per connectivity code.
Connectivity code fixed generate token code. Remove the temporary fix that
was added in RI code.

Change-Id: Iec9b07b98d65309a4cc2998252fcc8c445975f55
Signed-off-by: Sashi Penta <sashi.kumar.penta@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/231
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
Tested-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

[SSM] Change to make SSM work with Connectivity Abstraction

Modify ResourceFinder to find Resources and check presence status with connectivity type

Change-Id: I2478904ff08b28ef2cbe131e06b95e3f059618fb
Signed-off-by: Minji Park <minjii.park@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/232
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>

Fixed crash on rec'd invalid data.

This issue is a fix for IOT 114.

Previously, a bad series of JSON coming in would cause an exception
to be thrown. this would result in the callback/server crashing, which
is not appropriate behavior. This fix catches and logs any JSON
errors keeping the callback/server from crashing.

NOTE: This changeset is originally from 01.org(changeset 695,
author: Erich Keane).

Change-Id: I1e7d042f243bc1b86771778c308f1187bcda875f
Signed-Off-by:Sudarshan Prasad<sudarshan.prasad@intel.com>
Signed-off-by: Erich Keane <erich.keane@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/103
Reviewed-by: Sashi Penta <sashi.kumar.penta@intel.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
(cherry picked from commit 65ecd8a508bf04d03153a9510a78995715242963)
Reviewed-on: https://gerrit.iotivity.org/gerrit/226

Modified connection type variable to match OC prefix

Change-Id: Ia62eee6d0f7810a819aa0d26129c3c21dd898950
Signed-Off-By:Sudarshan Prasad<sudarshan.prasad@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/180
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sakthivel Samidurai <sakthivel.samidurai@intel.com>
Reviewed-by: Omkar Hegde <omkar.m.hegde@intel.com>

Adding tinyDTLS into iotivity repo

Picked GIT commit id 7d039c from
http://sourceforge.net/projects/tinydtls/ .

iotivity build system can compile tinydtls using autotools
with below steps:
1)autoconf
2)./configure --without-debug --without-ecc 'CFLAGS=-fPIC'
3)make

Change-Id: I97a917955ca13a06914ecee178c0cee0701eda12
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
(cherry picked from commit 35e1a2e526a8cfe19a360aa711998d787303e63e)
Reviewed-on: https://gerrit.iotivity.org/gerrit/225
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

tizen: packaging: build on x86_64 arm64 and others too

Without this change only 2 arch were possible to build :
arm and x86 (32bits)

Since some scon's variables are not aligned with Tizen's infra name,
mapping is needed for x86 amd arm64.

While for x86_64 it can use the generic RPM macro %{_arch} value
which is same, it prevents writing an extra "if endif block".

Other unsuported arch were not tested (ie: mips, ppc ...)
and would  probably need more sources or make/scon/files adaptations.

With a couple of other fixes (to come later),
rpmbuild was successful using Tizen:Common's repos
with those archs : x86, x86_64, armv7l, aarch64.

Feel free to me ask support upstream or on tizen trackers

Change-Id: I1034d66ac29bee1667a7e12d6ceb9e08806c3a15
Signed-off-by: Philippe Coval <philippe.coval@open.eurogiciel.org>
Reviewed-on: https://gerrit.iotivity.org/gerrit/157
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ossama Othman <ossama.othman@intel.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Caiwen Zhang <caiwen.zhang@intel.com>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>
(cherry picked from commit f737269c24f96abbec60eeedc3c178ce2ee8eee0)
Reviewed-on: https://gerrit.iotivity.org/gerrit/224

Improve usability of ActionSet for Group Action Feature.

ActionSet structure is not show directly to developer.
Because there is the definition of ActionSet in GroupManager.h.
So we separate the definition of ActionSet from Groupmanager to ActionSet.h
And it is exposed to developer by one type of header file.

Change-Id: I2ccb93cf70ec42b122aaead4943aed56df161641
Signed-off-by: HyunJun Kim <hyunjun2.kim@samsung.com>
(cherry picked from commit 9520eb3c228275be55a3ee0401a8c590571c3168)
Reviewed-on: https://gerrit.iotivity.org/gerrit/223
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Added release notes for Jan 17th release

Change-Id: I62b1457e8a35082f7896fb5d64630a173c59f233
Signed-Off-by:Sudarshan Prasad<sudarshan.prasad@intel.com>
(cherry picked from commit d6838c11d8882850337a99ede23fd61ba48d0e5b)
Reviewed-on: https://gerrit.iotivity.org/gerrit/222
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>

Fix zeroing of OCServerResponse payload array

Change-Id: I93ba1720a3de0c54937d5d8d48d72574b2dbb65d
Signed-off-by: Maks Naumov <maksqwe1@ukr.net>
(cherry picked from commit 1a74b39708d3c9d616ee3cdaf19a97dc9c91134b)
Reviewed-on: https://gerrit.iotivity.org/gerrit/163
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Remove high frequency log to avoid the log full with useless information

The OCProcess function is invoked in while loop. The functions that are
invoked by OCProcess will be invoked very frequently. If add log in these
functions, it may make the log full of useless information.

This patch removes frequent log from OCProcess/OCProcessPresence/
OCProcessCoAP/coap_read/OCRecvFrom function.

Signed-off-by: Caiwen Zhang<caiwen.zhang@intel.com>
Change-Id: Iabe182aca8430438085296cd16d69f5bde0626a8
(cherry picked from commit e234f7e623683d2d015752c9db8b8d564131fb4e)
Reviewed-on: https://gerrit.iotivity.org/gerrit/221
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Changed OCStackResult to be consistent across compile flags.

Issue 245 was reported that pointed out that the presence flag in
the compiler makes OCStackResult incompatible across differently
compiled versions of the CStack.  Additionally, this spaces out the
error codes from success codes, permitting additional room for more
success codes.

Change-Id: Ia93f34e23756e7663ea80f6667699d59e358058e
Signed-off-by: Erich Keane <erich.keane@intel.com>
(cherry picked from commit b7786c89ef40ec15c904633b979be6c73dfee53d)
Reviewed-on: https://gerrit.iotivity.org/gerrit/220
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Update gitignore.

Change-Id: Ie3f1c5a6b6d2c1e8b7d9df6336eea9083597b697
Signed-off-by: Sanjeev BA <as2902.b@samsung.com>
(cherry picked from commit 3df96e9d2f9968512ce87954e7967ea2687e435e)
Reviewed-on: https://gerrit.iotivity.org/gerrit/219
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Add method of Things-Manager.

It was not included implementation.
So We implement about bindResourceToGroup for Group Formation feature.

Change-Id: Iade53004d8b3d974846a3b9056c6c3b6649104fa
Signed-off-by: HyunJun Kim <hyunjun2.kim@samsung.com>
(cherry picked from commit dab7666e8db685c0a4dc16a1f1ed38e79e9ce219)
Reviewed-on: https://gerrit.iotivity.org/gerrit/218
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix Memory leak of getResourceType() in ocstack.c

When memory allocation is failed, add free memory for already allocated memory.

Change-Id: I601367e7bfe3ff6a616d870636d5b535a32047fd
Signed-off-by: YW Sung <yw.sung@samsung.com>
(cherry picked from commit ede5597d2740085e182a9f3f301873ec94ebba9c)
Reviewed-on: https://gerrit.iotivity.org/gerrit/217
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fixed seg fault in simpleclient sample app (Bug IOT-130)

Arduino server sample uses light representation which is different
from what simpleclient expects. Updated simpleclient to catch
exception in this scenario.

Change-Id: I3d5d2e2f7785a9345655bc347662efb7fd0927a2
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
(cherry picked from commit 16aaed92f74fedf975a1631800200b8ffc526f7d)
Reviewed-on: https://gerrit.iotivity.org/gerrit/216
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Added style formatting config files for iotivity coding standards

The style config files are used to apply IoTivity coding style, as
described on the wiki https://wiki.iotivity.org/iotivity_coding_standards.

Change-Id: Ifd3937bebde658a76aa7c9918b4c699c1384f341
Signed-off-by: William Dieter <william.r.dieter@intel.com>
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
(cherry picked from commit 859a79508f993a73ad56d2b42a986915e1584958)
Reviewed-on: https://gerrit.iotivity.org/gerrit/215
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fixed InProcServerWrapper to be thread safe

A few of the variables/collections in the server wrapper were not
properly protected against multi-threading.  This fix adds a mutex
to the class to ensure that all accessed items are protected.
Additionally, they are moved out of the root namespace to prevent
polution.

Change-Id: I2eedb9bf9b1960ff7a018a2ca1e15183e42bd9cd
Signed-off-by: Erich Keane <erich.keane@intel.com>
(cherry picked from commit a31834d16272a5b8d3382fb2959676804157c732)
Reviewed-on: https://gerrit.iotivity.org/gerrit/214
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Fix failed unit tests for CSDK stack.

The existing unit tests in stacktests.cpp had not kept up with
ongoing modifications to the C API.  Modified failing tests to
align with latest C API functionality.

Also modified to remove limitation that required the eth0 network
interface to be available on the test machine.  If eth0 was not
available, some tests would fail.

Also added a local function to handle C stack initialization and
modified tests to call this function.  Added local functions to
intialize the number of expected resources and resource index
depending on whether presence is defined.

Re-grouped related test cases and created common group test names.

Change-Id: Ief59854d762ef9837f8b1d5b95bebc6514bd545a
Signed-off-by: Doug Hudson <douglas.hudson@intel.com>
(cherry picked from commit 15c4be36928eafe79176dfa785d832276a2a1c2a)
Reviewed-on: https://gerrit.iotivity.org/gerrit/213
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

C++ Avoid crash in case of Invalid/Empty Payload

This change is based on a bug reported by SHP wherein
they want to be able to send response with empty payload.
Instead of throwing an error, we now send an empty
OCRepresentation() object to the client callback.

Change-Id: I16f298bf8a0bdbb545e1133d751582f418991352
Signed-off-by: omkar <omkar.m.hegde@intel.com>
(cherry picked from commit 43e5a4f0a42a739e93f65ccf31eff82df11144c3)
Reviewed-on: https://gerrit.iotivity.org/gerrit/212
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Change the definition of GROUP_INTERFACE.

The definition of GROUP_INTERFACE as "oc.mi.c"
does not get big meaning.
So, we change the definition to "oc.mi.grp".
Regarding opinion of Caiwen.

Issue : [IOT-253]

Signed-off-by: HyunJun Kim <hyunjun2.kim@samsung.com>
Change-Id: Ia196e8a2a0856ed0651874eec419f77468e8329e
(cherry picked from commit 2733ac3486521c0491819e3c9b6b65b8ca8c07f4)
Reviewed-on: https://gerrit.iotivity.org/gerrit/211
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Adding OK Response Code for POST

Earlier, we were setting response code for POST only if a new resource
is created assuming that the value is by default OK.
TE tests showed error on using different version of Ubuntu.
Modified simpleserver to explicitly add OK status.
Added constructors to OCResourceRequest and
OCResourceResponse classes to avoid undefined behavior.
This Fixes IOT-128.

Change-Id: I13faff2fb254c777ccc8c8979824d53f5111ab3e
Signed-off-by: omkar <omkar.m.hegde@intel.com>
(cherry picked from commit ad7450d4c430e4936969e8e29b0738db9ffeea29)
Reviewed-on: https://gerrit.iotivity.org/gerrit/210
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Removed executable bit from non-executable files.

Change-Id: Ifa125423fb435575e391471cc7dafe3f1bd84972
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
(cherry picked from commit 393d481d4a05809d608937ed31f807828f637a73)
Reviewed-on: https://gerrit.iotivity.org/gerrit/209
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>

Add quick guide into the readme

Change-Id: I502acfebf6a4752bf2ffa57d05dc31e8eac65959
Signed-off-by: Caiwen Zhang<caiwen.zhang@intel.com>
(cherry picked from commit c7f29618b936895b74ba75760aa2e579ec9ba56e)
Reviewed-on: https://gerrit.iotivity.org/gerrit/208
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Sudarshan Prasad <sudarshan.prasad@intel.com>