ACPI: CPPC: Check present CPUs for determining _CPC is valid

[ Upstream commit 2aeca6bd02776d7f56a49a32be0dd184f204d888 ]

As this is a static check, it should be based upon what is currently
present on the system. This makes probeing more deterministic.

While local APIC flags field (lapic_flags) of cpu core in MADT table is
0, then the cpu core won't be enabled. In this case, _CPC won't be found
in this core, and return back to _CPC invalid with walking through
possible cpus (include disable cpus). This is not expected, so switch to
check present CPUs instead.

Reported-by: Jinzhou Su <Jinzhou.Su@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: battery: Add the ThinkPad "Not Charging" quirk

[ Upstream commit e96c1197aca628f7d2480a1cc3214912b40b3414 ]

The EC/ACPI firmware on Lenovo ThinkPads used to report a status
of "Unknown" when the battery is between the charge start and
charge stop thresholds. On Windows, it reports "Not Charging"
so the quirk has been added to also report correctly.

Now the "status" attribute returns "Not Charging" when the
battery on ThinkPads is not physicaly charging.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amdgpu/pm: Make sysfs pm attributes as read-only for VFs

[ Upstream commit 11c9cc95f818f0f187e9b579a7f136f532b42445 ]

== Description ==
Setting values of pm attributes through sysfs
should not be allowed in SRIOV mode.
These calls will not be processed by FW anyway,
but error handling on sysfs level should be improved.

== Changes ==
This patch prohibits performing of all set commands
in SRIOV mode on sysfs level.
It offers better error handling as calls that are
not allowed will not be propagated further.

== Test ==
Writing to any sysfs file in passthrough mode will succeed.
Writing to any sysfs file in ONEVF mode will yield error:
"calling process does not have sufficient permission to execute a command".

Signed-off-by: Marina Nikolic <Marina.Nikolic@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fixup bad vram size on gmc v8

[ Upstream commit 11544d77e3974924c5a9c8a8320b996a3e9b2f8b ]

Some boards(like RX550) seem to have garbage in the upper
16 bits of the vram size register.  Check for
this and clamp the size properly.  Fixes
boards reporting bogus amounts of vram.

after add this patch,the maximum GPU VRAM size is 64GB,
otherwise only 64GB vram size will be used.

Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling

[ Upstream commit ffaea6ebfe9ce06ebb3a54811a47688f2b0893cd ]

Replace all instances of open-coded while loops for polling registers
with calls to readl_poll_timeout() and, while at it, also fix some
possible infinite loop instances.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211216125748.179602-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5

[ Upstream commit 1d4e0b3abb168b2ee1eca99c527cffa1b80b6161 ]

ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e

According to ACPI 6.4, Section 16.2, the CPU cache flushing is
required on entering to S1, S2, and S3, but the ACPICA code
flushes the CPU cache regardless of the sleep state.

Blind cache flush on entering S5 causes problems for TDX.

Flushing happens with WBINVD that is not supported in the TDX
environment.

TDX only supports S5 and adjusting ACPICA code to conform to the
spec more strictly fixes the issue.

Link: https://github.com/acpica/acpica/commit/3dd7e1f3
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Fix wrong interpretation of PCC address

[ Upstream commit 9a3b8655db1ada31c82189ae13f40eb25da48c35 ]

ACPICA commit 41be6afacfdaec2dba3a5ed368736babc2a7aa5c

With the PCC Opregion in the firmware and we are hitting below kernel crash:

-->8
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
 Workqueue: pm pm_runtime_work
 pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __memcpy+0x54/0x260
 lr : acpi_ex_write_data_to_field+0xb8/0x194
 Call trace:
  __memcpy+0x54/0x260
  acpi_ex_store_object_to_node+0xa4/0x1d4
  acpi_ex_store+0x44/0x164
  acpi_ex_opcode_1A_1T_1R+0x25c/0x508
  acpi_ds_exec_end_op+0x1b4/0x44c
  acpi_ps_parse_loop+0x3a8/0x614
  acpi_ps_parse_aml+0x90/0x2f4
  acpi_ps_execute_method+0x11c/0x19c
  acpi_ns_evaluate+0x1ec/0x2b0
  acpi_evaluate_object+0x170/0x2b0
  acpi_device_set_power+0x118/0x310
  acpi_dev_suspend+0xd4/0x180
  acpi_subsys_runtime_suspend+0x28/0x38
  __rpm_callback+0x74/0x328
  rpm_suspend+0x2d8/0x624
  pm_runtime_work+0xa4/0xb8
  process_one_work+0x194/0x25c
  worker_thread+0x260/0x49c
  kthread+0x14c/0x30c
  ret_from_fork+0x10/0x20
 Code: f9000006 f81f80a7 d65f03c0 361000c2 (b9400026)
 ---[ end trace 24d8a032fa77b68a ]---

The reason for the crash is that the PCC channel index passed via region.address
in acpi_ex_store_object_to_node is interpreted as the channel subtype
incorrectly.

Assuming the PCC op_region support is not used by any other type, let us
remove the subtype check as the AML has no access to the subtype information.
Once we remove it, the kernel crash disappears and correctly complains about
missing PCC Opregion handler.

ACPI Error: No handler for Region [PFRM] ((____ptrval____)) [PCC] (20210730/evregion-130)
ACPI Error: Region PCC (ID=10) has no handler (20210730/exfldio-261)
ACPI Error: Aborting method \_SB.ETH0._PS3 due to previous error (AE_NOT_EXIST) (20210730/psparse-531)

Link: https://github.com/acpica/acpica/commit/41be6afa
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()

[ Upstream commit 24ea5f90ec9548044a6209685c5010edd66ffe8f ]

ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e

If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class,
acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to
obtain return_desc which may require additional resolution with
the help of acpi_ex_read_data_from_field (). If the latter fails,
the reference counter of the original return_desc is decremented
which is incorrect, because acpi_ns_get_attached_object () does not
increment the reference counter of the object returned by it.

This issue may lead to premature deletion of the attached object
while it is still attached and a use-after-free and crash in the
host OS.  For example, this may happen when on evaluation of ref_of()
a local region field where there is no registered handler for the
given Operation Region.

Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away
after a acpi_ex_read_data_from_field () failure.

Link: https://github.com/acpica/acpica/commit/d984f120
Link: https://github.com/acpica/acpica/pull/685
Reported-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Utilities: Avoid deleting the same object twice in a row

[ Upstream commit 1cdfe9e346b4c5509ffe19ccde880fd259d9f7a3 ]

ACPICA commit c11af67d8f7e3d381068ce7771322f2b5324d687

If original_count is 0 in acpi_ut_update_ref_count (),
acpi_ut_delete_internal_obj () is invoked for the target object, which is
incorrect, because that object has been deleted once already and the
memory allocated to store it may have been reclaimed and allocated
for a different purpose by the host OS.  Moreover, a confusing debug
message following the "Reference Count is already zero, cannot
decrement" warning is printed in that case.

To fix this issue, make acpi_ut_update_ref_count () return after finding
that original_count is 0 and printing the above warning.

Link: https://github.com/acpica/acpica/commit/c11af67d
Link: https://github.com/acpica/acpica/pull/652
Reported-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions

[ Upstream commit f81bdeaf816142e0729eea0cc84c395ec9673151 ]

ACPICA commit bc02c76d518135531483dfc276ed28b7ee632ce1

The current ACPI_ACCESS_*_WIDTH defines do not provide a way to
test that size is small enough to not cause an overflow when
applied to a 32-bit integer.

Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT,
ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and
redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines.

This was inititally reported on Linux where a size of 102 in
ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR
initialization code.

Link: https://github.com/acpica/acpica/commit/bc02c76d
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jffs2: GC deadlock reading a page that is used in jffs2_write_begin()

[ Upstream commit aa39cc675799bc92da153af9a13d6f969c348e82 ]

GC task can deadlock in read_cache_page() because it may attempt
to release a page that is actually allocated by another task in
jffs2_write_begin().
The reason is that in jffs2_write_begin() there is a small window
a cache page is allocated for use but not set Uptodate yet.

This ends up with a deadlock between two tasks:
1) A task (e.g. file copy)
   - jffs2_write_begin() locks a cache page
   - jffs2_write_end() tries to lock "alloc_sem" from
 jffs2_reserve_space() <-- STUCK
2) GC task (jffs2_gcd_mtd3)
   - jffs2_garbage_collect_pass() locks "alloc_sem"
   - try to lock the same cache page in read_cache_page() <-- STUCK

So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin()
while reading data in a cache page.

Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/etnaviv: consider completed fence seqno in hang check

[ Upstream commit cdd156955f946beaa5f3a00d8ccf90e5a197becc ]

Some GPU heavy test programs manage to trigger the hangcheck quite often.
If there are no other GPU users in the system and the test program
exhibits a very regular structure in the commandstreams that are being
submitted, we can end up with two distinct submits managing to trigger
the hangcheck with the FE in a very similar address range. This leads
the hangcheck to believe that the GPU is stuck, while in reality the GPU
is already busy working on a different job. To avoid those spurious
GPU resets, also remember and consider the last completed fence seqno
in the hang check.

Reported-by: Joerg Albert <joerg.albert@iav.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: rate limit SA mapping change message to user space

[ Upstream commit 4e484b3e969b52effd95c17f7a86f39208b2ccf4 ]

Kernel generates mapping change message, XFRM_MSG_MAPPING,
when a source port chage is detected on a input state with UDP
encapsulation set.  Kernel generates a message for each IPsec packet
with new source port.  For a high speed flow per packet mapping change
message can be excessive, and can overload the user space listener.

Introduce rate limiting for XFRM_MSG_MAPPING message to the user space.

The rate limiting is configurable via netlink, when adding a new SA or
updating it. Use the new attribute XFRMA_MTIMER_THRESH in seconds.

v1->v2 change:
update xfrm_sa_len()

v2->v3 changes:
use u32 insted unsigned long to reduce size of struct xfrm_state
fix xfrm_ompat size Reported-by: kernel test robot <lkp@intel.com>
accept XFRM_MSG_MAPPING only when XFRMA_ENCAP is present

Co-developed-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATES

[ Upstream commit cfb4c313be670fd4bd09650216620fa4514cdb93 ]

This set HCI_QUIRK_VALID_LE_STATES quirk which is required for the likes
of experimental LE simultaneous roles.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btintel: Add missing quirks and msft ext for legacy bootloader

[ Upstream commit 3547a008c8962df2175db1e78b80f27e027ec549 ]

This patch add missing HCI quirks and MSFT extension for legacy
bootloader when it is running in the operational firmware.

Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: Fix napi related hang

[ Upstream commit d943fdad7589653065be0e20aadc6dff37725ed4 ]

Similar to the same bug in ath10k, a napi disable w/out it being enabled
will hang forever.  I believe I saw this while trying rmmod after driver
had some failure on startup.  Fix it by keeping state on whether napi is
enabled or not.

And, remove un-used napi pointer in ath11k driver base struct.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200903195254.29379-1-greearb@candelatech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: registers: Rename function names to avoid conflicts and build problems

[ Upstream commit 077b7320942b64b0da182aefd83c374462a65535 ]

The function names init_registers() and restore_registers() are used
in several net/ethernet/ and gpu/drm/ drivers for other purposes (not
calls to UML functions), so rename them.

This fixes multiple build errors.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: check minor range in device_add_disk()

[ Upstream commit e338924bd05d6e71574bc13e310c89e10e49a8a5 ]

ioctl(fd, LOOP_CTL_ADD, 1048576) causes

  sysfs: cannot create duplicate filename '/dev/block/7:0'

message because such request is treated as if ioctl(fd, LOOP_CTL_ADD, 0)
due to MINORMASK == 1048575. Verify that all minor numbers for that device
fit in the minor range.

Reported-by: wangyangbo <wangyangbo@uniontech.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/b1b19379-23ee-5379-0eb5-94bf5f79f1b4@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-pci-gli: GL9755: Support for CD/WP inversion on OF platforms

[ Upstream commit 189f1d9bc3a5ea3e442e119e4a5deda63da8c462 ]

This is required on some Apple ARM64 laptops using this controller.
As is typical on DT platforms, pull these quirks from the device tree
using the standard mmc bindings.

See Documentation/devicetree/bindings/mmc/mmc-controller.yaml

Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211215161045.38843-2-marcan@marcan.st
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ

[ Upstream commit 459fc0f2c6b0f6e280bfa0f230c100c9dfe3a199 ]

In some rare cases when the HW is in a bad state, we may get this
interrupt when prph_info is not set yet.  Then we will try to
dereference it to check the sleep_notif element, which will cause an
oops.

Fix that by ignoring the interrupt if prph_info is not set yet.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: fix AUX ROC removal

[ Upstream commit f0337cb48f3bf5f0bbccc985d8a0a8c4aa4934b7 ]

When IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD is set, removing a time event
always tries to cancel session protection. However, AUX ROC does
not use session protection so it was never removed. As a result,
if the driver tries to allocate another AUX ROC event right after
cancelling the first one, it will fail with a warning.
In addition, the time event data passed to iwl_mvm_remove_aux_roc_te()
is incorrect. Fix it.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.915e1f69f062.Id837e917f1c2beaca7c1eb33333d622548918a76@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: Fix calculation of frame length

[ Upstream commit 40a0b38d7a7f91a6027287e0df54f5f547e8d27e ]

The RADA might include in the Rx frame the MIC and CRC bytes.
These bytes should be removed for non monitor interfaces and
should not be passed to mac80211.

Fix the Rx processing to remove the extra bytes on non monitor
cases.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: remove module loading failure message

[ Upstream commit 6518f83ffa51131daaf439b66094f684da3fb0ae ]

When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes
when the opmode module cannot be loaded, due to completing
the completion before using drv->dev, which can then already
be freed.

Fix this by removing the (fairly useless) message. Moving the
completion later causes a deadlock instead, so that's not an
option.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: fix leaks/bad data after failed firmware load

[ Upstream commit ab07506b0454bea606095951e19e72c282bfbb42 ]

If firmware load fails after having loaded some parts of the
firmware, e.g. the IML image, then this would leak. For the
host command list we'd end up running into a WARN on the next
attempt to load another firmware image.

Fix this by calling iwl_dealloc_ucode() on failures, and make
that also clear the data so we start fresh on the next round.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: AVS: qcom-cpr: Use div64_ul instead of do_div

[ Upstream commit 92c550f9ffd2884bb5def52b5c0485a35e452784 ]

do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211125014311.45942-1-deng.changcheng@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtw88: 8822c: update rx settings to prevent potential hw deadlock

[ Upstream commit c1afb26727d9e507d3e17a9890e7aaf7fc85cd55 ]

These settings enables mac to detect and recover when rx fifo
circuit deadlock occurs. Previous version missed this, so we fix it.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211217012708.8623-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream

[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]

Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.

4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.

BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23

CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 __kasan_report.cold+0x37/0x7c
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 kasan_report+0xe/0x20
 check_memory_region+0x15a/0x1d0
 memcpy+0x20/0x50
 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __usb_unanchor_urb+0x12f/0x210
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()

[ Upstream commit 8b3046abc99eefe11438090bcc4ec3a3994b55d0 ]

syzbot is reporting lockdep warning at ath9k_wmi_event_tasklet() followed
by kernel panic at get_htc_epid_queue() from ath9k_htc_tx_get_packet() from
ath9k_htc_txstatus() [1], for ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID)
depends on spin_lock_init() from ath9k_init_priv() being already completed.

Since ath9k_wmi_event_tasklet() is set by ath9k_init_wmi() from
ath9k_htc_probe_device(), it is possible that ath9k_wmi_event_tasklet() is
called via tasklet interrupt before spin_lock_init() from ath9k_init_priv()
 from ath9k_init_device() from ath9k_htc_probe_device() is called.

Let's hold ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) no-op until
ath9k_tx_init() completes.

Link: https://syzkaller.appspot.com/bug?extid=31d54c60c5b254d6f75b
Reported-by: syzbot <syzbot+31d54c60c5b254d6f75b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+31d54c60c5b254d6f75b@syzkaller.appspotmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/77b76ac8-2bee-6444-d26c-8c30858b8daa@i-love.sakura.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k_htc: fix NULL pointer dereference at ath9k_htc_rxep()

[ Upstream commit b0ec7e55fce65f125bd1d7f02e2dc4de62abee34 ]

syzbot is reporting lockdep warning followed by kernel panic at
ath9k_htc_rxep() [1], for ath9k_htc_rxep() depends on ath9k_rx_init()
being already completed.

Since ath9k_htc_rxep() is set by ath9k_htc_connect_svc(WMI_BEACON_SVC)
 from ath9k_init_htc_services(), it is possible that ath9k_htc_rxep() is
called via timer interrupt before ath9k_rx_init() from ath9k_init_device()
is called.

Since we can't call ath9k_init_device() before ath9k_init_htc_services(),
let's hold ath9k_htc_rxep() no-op until ath9k_rx_init() completes.

Link: https://syzkaller.appspot.com/bug?extid=4d2d56175b934b9a7bf9
Reported-by: syzbot <syzbot+4d2d56175b934b9a7bf9@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+4d2d56175b934b9a7bf9@syzkaller.appspotmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/2b88f416-b2cb-7a18-d688-951e6dc3fe92@i-love.sakura.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: improve wmm index allocation

[ Upstream commit 70fb028707c8871ef9e56b3ffa3d895e14956cc4 ]

Typically all AP interfaces on a PHY will share the same WMM settings, while
sta/mesh interfaces will usually inherit the settings from a remote device.
In order minimize the likelihood of conflicting WMM settings, make all AP
interfaces share one slot, and all non-AP interfaces another one.

This also fixes running multiple AP interfaces on MT7613, which only has 3
WMM slots.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: do not pass the received frame with decryption error

[ Upstream commit dd28dea52ad9376d2b243a8981726646e1f60b1a ]

MAC80211 doesn't care any decryption error in 802.3 path, so received
frame will be dropped if HW tell us that the cipher configuration is not
matched as well as the header has been translated to 802.3. This case only
appears when IEEE80211_FCTL_PROTECTED is 0 and cipher suit is not none in
the corresponding HW entry.

The received frame is only reported to monitor interface if HW decryption
block tell us there is ICV error or CCMP/BIP/WPI MIC error. Note in this
case the reported frame is decrypted 802.11 frame and the payload may be
malformed due to mismatched key.

Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix possible deadlock while mt7615_register_ext_phy()

[ Upstream commit 8c55516de3f9b76b9d9444e7890682ec2efc809f ]

ieee80211_register_hw() is called with rtnl_lock held, and this could be
caused lockdep from a work item that's on a workqueue that is flushed
with the rtnl held.

Move mt7615_register_ext_phy() outside the init_work().

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0

[ Upstream commit 00558586382891540c59c9febc671062425a6e47 ]

When a new USB device gets plugged to nested hubs, the affected hub,
which connects to usb 2-1.4-port2, doesn't report there's any change,
hence the nested hubs go back to runtime suspend like nothing happened:
[  281.032951] usb usb2: usb wakeup-resume
[  281.032959] usb usb2: usb auto-resume
[  281.032974] hub 2-0:1.0: hub_resume
[  281.033011] usb usb2-port1: status 0263 change 0000
[  281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.049797] usb 2-1: usb wakeup-resume
[  281.069800] usb 2-1: Waited 0ms for CONNECT
[  281.069810] usb 2-1: finish resume
[  281.070026] hub 2-1:1.0: hub_resume
[  281.070250] usb 2-1-port4: status 0203 change 0000
[  281.070272] usb usb2-port1: resume, status 0
[  281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[  281.089813] usb 2-1.4: usb wakeup-resume
[  281.109792] usb 2-1.4: Waited 0ms for CONNECT
[  281.109801] usb 2-1.4: finish resume
[  281.109991] hub 2-1.4:1.0: hub_resume
[  281.110147] usb 2-1.4-port2: status 0263 change 0000
[  281.110234] usb 2-1-port4: resume, status 0
[  281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[  281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.110426] hub 2-1.4:1.0: hub_suspend
[  281.110565] usb 2-1.4: usb auto-suspend, wakeup 1
[  281.130998] hub 2-1:1.0: hub_suspend
[  281.137788] usb 2-1: usb auto-suspend, wakeup 1
[  281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.177828] usb 2-1: usb wakeup-resume
[  281.197839] usb 2-1: Waited 0ms for CONNECT
[  281.197850] usb 2-1: finish resume
[  281.197984] hub 2-1:1.0: hub_resume
[  281.198203] usb 2-1-port4: status 0203 change 0000
[  281.198228] usb usb2-port1: resume, status 0
[  281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[  281.217835] usb 2-1.4: usb wakeup-resume
[  281.237834] usb 2-1.4: Waited 0ms for CONNECT
[  281.237845] usb 2-1.4: finish resume
[  281.237990] hub 2-1.4:1.0: hub_resume
[  281.238067] usb 2-1.4-port2: status 0263 change 0000
[  281.238148] usb 2-1-port4: resume, status 0
[  281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[  281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.238385] hub 2-1.4:1.0: hub_suspend
[  281.238523] usb 2-1.4: usb auto-suspend, wakeup 1
[  281.258076] hub 2-1:1.0: hub_suspend
[  281.265744] usb 2-1: usb auto-suspend, wakeup 1
[  281.285976] hub 2-0:1.0: hub_suspend
[  281.285988] usb usb2: bus auto-suspend, wakeup 1

USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If
the link is in a non-U0 state, then the device must transition the link
to U0 prior to sending the remote wake message", but the hub only
transits the link to U0 after signaling remote wakeup.

So be more forgiving and use a 20ms delay to let the link transit to U0
for remote wakeup.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20211215120108.336597-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: Fix initialization of min and max frequency QoS requests

[ Upstream commit 521223d8b3ec078f670c7c35a1a04b1b2af07966 ]

The min and max frequency QoS requests in the cpufreq core are
initialized to whatever the current min and max frequency values are
at the init time, but if any of these values change later (for
example, cpuinfo.max_freq is updated by the driver), these initial
request values will be limiting the CPU frequency unnecessarily
unless they are changed by user space via sysfs.

To address this, initialize min_freq_req and max_freq_req to
FREQ_QOS_MIN_DEFAULT_VALUE and FREQ_QOS_MAX_DEFAULT_VALUE,
respectively, so they don't really limit anything until user
space updates them.

Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: runtime: Add safety net to supplier device release

[ Upstream commit d1579e61192e0e686faa4208500ef4c3b529b16c ]

Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.

To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.

This change is not expected to have any visible functional impact.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/hpre - fix memory leak in hpre_curve25519_src_init()

[ Upstream commit 51fa916b81e5f406a74f14a31a3a228c3cc060ad ]

hpre_curve25519_src_init() allocates memory for 'ptr' before calling
memcmp(). If memcmp() returns 0, the function will return '-EINVAL'
without freeing memory.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Move SEV_INIT retry for corrupted data

[ Upstream commit e423b9d75e779d921e6adf5ac3d0b59400d6ba7e ]

Move the data corrupted retry of SEV_INIT into the
__sev_platform_init_locked() function. This is for upcoming INIT_EX
support as well as helping direct callers of
__sev_platform_init_locked() which currently do not support the
retry.

Signed-off-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Cc: John Allen <john.allen@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Adjust length of CCPLEX cluster MMIO region

[ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ]

The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus

[ Upstream commit cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ]

The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.lil@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

audit: ensure userspace is penalized the same as the kernel when under pressure

[ Upstream commit 8f110f530635af44fff1f4ee100ecef0bac62510 ]

Due to the audit control mutex necessary for serializing audit
userspace messages we haven't been able to block/penalize userspace
processes that attempt to send audit records while the system is
under audit pressure.  The result is that privileged userspace
applications have a priority boost with respect to audit as they are
not bound by the same audit queue throttling as the other tasks on
the system.

This patch attempts to restore some balance to the system when under
audit pressure by blocking these privileged userspace tasks after
they have finished their audit processing, and dropped the audit
control mutex, but before they return to userspace.

Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/amdgpu: fix gmc bo pin count leak in SRIOV

[ Upstream commit 948e7ce01413b71395723aaf846015062aea3a43 ]

[Why]
gmc bo will be pinned during loading amdgpu and reset in SRIOV while
only unpinned in unload amdgpu

[How]
add amdgpu_in_reset and sriov judgement to skip pin bo

v2: fix wrong judgement

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/amdgpu: fix psp tmr bo pin count leak in SRIOV

[ Upstream commit 85dfc1d692c9434c37842e610be37cd4ae4e0081 ]

[Why]
psp tmr bo will be pinned during loading amdgpu and reset in SRIOV while
only unpinned in unload amdgpu

[How]
add amdgpu_in_reset and sriov judgement to skip pin bo

v2: fix wrong judgement

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

[ Upstream commit 8c3e5b74b9e2146f564905e50ca716591c76d4f1 ]

The mmc core takes a specific path to support initializing of a
non-standard SDIO card. This is triggered by looking for the card-quirk,
MMC_QUIRK_NONSTD_SDIO.

In mmc_sdio_init_card() this gets rather messy, as it causes the code to
bail out earlier, compared to the usual path. This leads to that the OCR
doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has
been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by
assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops.

To make the behaviour consistent, let's instead rely on the core to save
the OCR in card->ocr during initialization.

Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@goldelico.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: tmio: reinit card irqs in reset routine

[ Upstream commit e315b1f3a170f368da5618f8a598e68880302ed1 ]

Refactor the code so that card detect irqs are always reenabled after a
reset. This avoids doing it manually all over the code or forgetting to
do this in the future.

Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
[wsa: added a comment when 'native_hotplug' has to be set]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20211103122646.64422-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()

[ Upstream commit 3af86b046933ba513d08399dba0d4d8b50d607d0 ]

In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of saa7146_register_device(). There is a dereference of
dev->vv_data in saa7146_vv_release(), which could lead to a NULL
pointer dereference on failure of saa7146_vv_init().

Fix this bug by adding a check of saa7146_vv_init().

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings,
and our static analyzer no longer warns about this code.

Link: https://lore.kernel.org/linux-media/20211203154030.111210-1-zhou1615@umn.edu
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rockchip: rkisp1: use device name for debugfs subdir name

[ Upstream commit c2611e479f5d9b05108270e1ab423955486b4457 ]

While testing Rockchip RK3399 with both ISPs enabled, a dmesg error
was observed:
```
[   15.559141] debugfs: Directory 'rkisp1' with parent '/' already present!
```

Fix it by using the device name for the debugfs subdirectory name
instead of the driver name, thus preventing name collision.

Link: https://lore.kernel.org/linux-media/20211010175457.438627-1-mike.rudenko@gmail.com
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: igorplugusb: receiver overflow should be reported

[ Upstream commit 8fede658e7ddb605bbd68ed38067ddb0af033db4 ]

Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid-of: Expose the touchscreen-inverted properties

[ Upstream commit b60d3c803d7603432a08aeaf988aff53b3a5ec64 ]

Allow the touchscreen-inverted-x/y device tree properties to control the
HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirks for the hid-input device.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
[bentiss: silence checkpatch warnings]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-3-alistair@alistair23.me
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: quirks: Allow inverting the absolute X/Y values

[ Upstream commit fd8d135b2c5e88662f2729e034913f183455a667 ]

Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix error handling in svm_range_add

[ Upstream commit 726be40607264b180a2b336c81e1dcff941de618 ]

Add null-pointer check after the last svm_range_new call. This was
originally reported by Zhou Qingyang <zhou1615@umn.edu> based on a
static analyzer.

To avoid duplicating the unwinding code from svm_range_handle_overlap,
I merged the two functions into one.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Do not WARN in bpf_warn_invalid_xdp_action()

[ Upstream commit 2cbad989033bff0256675c38f96f5faab852af4b ]

The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by
any bugged program, and even attaching a correct program to a NIC
not supporting the given action.

The resulting splat, beyond polluting the logs, fouls automated tools:
e.g. a syzkaller reproducers using an XDP program returning an
unsupported action will never pass validation.

Replace the WARN_ONCE with a less intrusive pr_warn_once().

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: Don't crash if no parameters are generated

[ Upstream commit 37dbb4c7c7442dbfc9b651e4ddd4afe30b26afc9 ]

It's possible that a parameterised test could end up with zero
parameters. At the moment, the test function will nevertheless be called
with NULL as the parameter. Instead, don't try to run the test code, and
just mark the test as SKIPped.

Reported-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bonding: debug: avoid printing debug logs when bond is not notifying peers

[ Upstream commit fee32de284ac277ba434a2d59f8ce46528ff3946 ]

Currently "bond_should_notify_peers: slave ..." messages are printed whenever
"bond_should_notify_peers" function is called.

+++
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
...
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
+++

This is confusing and can also clutter up debug logs.
Print logs only when the peer notification happens.

Signed-off-by: Suresh Kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce: Mark mce_read_aux() noinstr

[ Upstream commit db6c996d6ce45dfb44891f0824a65ecec216f47a ]

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0x681: call to mce_read_aux() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-10-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce: Mark mce_end() noinstr

[ Upstream commit b4813539d37fa31fed62cdfab7bd2dd8929c5b2e ]

It is called by the #MC handler which is noinstr.

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0xbd6: call to memset() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-9-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce: Mark mce_panic() noinstr

[ Upstream commit 3c7ce80a818fa7950be123cac80cd078e5ac1013 ]

And allow instrumentation inside it because it does calls to other
facilities which will not be tagged noinstr.

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0xc73: call to mce_panic() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-8-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce: Allow instrumentation during task work queueing

[ Upstream commit 4fbce464db81a42f9a57ee242d6150ec7f996415 ]

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0xdb1: call to queue_task_work() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-6-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: sdx55: fix IPA interconnect definitions

[ Upstream commit c0d6316c238b1bd743108bd4b08eda364f47c7c9 ]

The first two interconnects defined for IPA on the SDX55 SoC are
really two parts of what should be represented as a single path
between IPA and system memory.

Fix this by combining the "memory-a" and "memory-b" interconnects
into a single "memory" interconnect.

Reported-by: David Heidelberg <david@ixit.cz>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: Avoid false DEADLOCK warning reported by lockdep

[ Upstream commit 767c94caf0efad136157110787fe221b74cb5c8a ]

With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports
below warning:

[  166.059415] ============================================
[  166.059416] WARNING: possible recursive locking detected
[  166.059418] 5.15.0-wt-ath+ #10 Tainted: G        W  O
[  166.059420] --------------------------------------------
[  166.059421] kworker/0:2/116 is trying to acquire lock:
[  166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059440]
               but task is already holding lock:
[  166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[  166.059491]
               other info that might help us debug this:
[  166.059492]  Possible unsafe locking scenario:

[  166.059493]        CPU0
[  166.059494]        ----
[  166.059495]   lock(&srng->lock);
[  166.059498]   lock(&srng->lock);
[  166.059500]
                *** DEADLOCK ***

[  166.059501]  May be due to missing lock nesting notation

[  166.059502] 3 locks held by kworker/0:2/116:
[  166.059504]  #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[  166.059511]  #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[  166.059517]  #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[  166.059532]
               stack backtrace:
[  166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G        W  O      5.15.0-wt-ath+ #10
[  166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019
[  166.059539] Workqueue: events free_obj_work
[  166.059543] Call Trace:
[  166.059545]  <IRQ>
[  166.059547]  dump_stack_lvl+0x56/0x7b
[  166.059552]  __lock_acquire+0xb9a/0x1a50
[  166.059556]  lock_acquire+0x1e2/0x330
[  166.059560]  ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059571]  _raw_spin_lock_bh+0x33/0x70
[  166.059574]  ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059584]  ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059594]  ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k]
[  166.059605]  ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k]
[  166.059618]  ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k]
[  166.059632]  ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[  166.059643]  ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[  166.059655]  ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci]
[  166.059659]  __napi_poll+0x28/0x230
[  166.059664]  net_rx_action+0x285/0x310
[  166.059668]  __do_softirq+0xe6/0x4d2
[  166.059672]  irq_exit_rcu+0xd2/0xf0
[  166.059675]  common_interrupt+0xa5/0xc0
[  166.059678]  </IRQ>
[  166.059679]  <TASK>
[  166.059680]  asm_common_interrupt+0x1e/0x40
[  166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70
[  166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a
[  166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206
[  166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006
[  166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001
[  166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001
[  166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840
[  166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001
[  166.059704]  free_debug_processing+0x257/0x3d0
[  166.059708]  ? free_obj_work+0x1f5/0x250
[  166.059712]  __slab_free+0x374/0x5a0
[  166.059718]  ? kmem_cache_free+0x2e1/0x370
[  166.059721]  ? free_obj_work+0x1f5/0x250
[  166.059724]  kmem_cache_free+0x2e1/0x370
[  166.059727]  free_obj_work+0x1f5/0x250
[  166.059731]  process_one_work+0x28b/0x660
[  166.059735]  ? process_one_work+0x660/0x660
[  166.059738]  worker_thread+0x37/0x390
[  166.059741]  ? process_one_work+0x660/0x660
[  166.059743]  kthread+0x176/0x1a0
[  166.059746]  ? set_kthread_struct+0x40/0x40
[  166.059749]  ret_from_fork+0x22/0x30
[  166.059754]  </TASK>

Since these two lockes are both initialized in ath11k_hal_srng_setup,
they are assigned with the same key. As a result lockdep suspects that
the task is trying to acquire the same lock (due to same key) while
already holding it, and thus reports the DEADLOCK warning. However as
they are different spinlock instances, the warning is false positive.

On the other hand, even no dead lock indeed, this is a major issue for
upstream regression testing as it disables lockdep functionality.

Fix it by assigning separate lock class key for each srng->lock.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: make kprobe profile testcase description unique

[ Upstream commit e5992f373c6eed6d09e5858e9623df1259b3ce30 ]

Commit 32f6e5da83c7 ("selftests/ftrace: Add kprobe profile testcase")
added a new kprobes testcase, but has a description which does not
describe what the test case is doing and is duplicating the description
of another test case.

Therefore change the test case description, so it is unique and then
allows easily to tell which test case actually passed or failed.

Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: aspeed-sgpio: Convert aspeed_sgpio.lock to raw_spinlock

[ Upstream commit ab39d6988dd53f354130438d8afa5596a2440fed ]

The gpio-aspeed-sgpio driver implements an irq_chip which need to be
invoked from hardirq context. Since spin_lock() can sleep with
PREEMPT_RT, it is no longer legal to invoke it while interrupts are
disabled.
This also causes lockdep to complain about:
[   25.919465] [ BUG: Invalid wait context ]
because aspeed_sgpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.

Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlock

[ Upstream commit 61a7904b6ace99b1bde0d0e867fa3097f5c8cee2 ]

The gpio-aspeed driver implements an irq_chip which need to be invoked
from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is
no longer legal to invoke it while interrupts are disabled.
This also causes lockdep to complain about:
[    0.649797] [ BUG: Invalid wait context ]
because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.

Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: prefer 1000baseT over 1000baseKX

[ Upstream commit f20f94f7f52c4685c81754f489ffcc72186e8bdb ]

The PHY settings table is supposed to be sorted by descending match
priority - in other words, earlier entries are preferred over later
entries.

The order of 1000baseKX/Full and 1000baseT/Full is such that we
prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is
a lot rarer than 1000baseT/Full, and thus is much less likely to
be preferred.

This causes phylink problems - it means a fixed link specifying a
speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full
rather than 1000baseT/Full as would be expected - and since we offer
userspace a software emulation of a conventional copper PHY, we want
to offer copper modes in preference to anything else. However, we do
still want to allow the rarer modes as well.

Hence, let's reorder these two modes to prefer copper.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/E1muvFO-00F6jY-1K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net-sysfs: update the queue counts in the unregistration path

[ Upstream commit d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ]

When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix tx hanging

[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ]

While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.

Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_work

[ Upstream commit ed05c7cf1286d7e31e7623bce55ff135723591bf ]

When enable debug config, it print below warning while shut down wlan
interface shuh as run "ifconfig wlan0 down".

The reason is because ar->regd_update_work is ran once, and it is will
call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which
is running in workqueue of ieee80211_local queued by ieee80211_queue_work().
Another thread from "ifconfig wlan0 down" will also accuqire the lock
by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and
then it call ieee80211_stop_device() to flush_workqueue(local->workqueue),
this will wait the workqueue of ieee80211_local finished. Then deadlock
will happen easily if the two thread run meanwhile.

Below warning disappeared after this change.

[  914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0)
[  914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan
[  914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0
[  914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[  914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0
[  914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[  914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[  914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[  914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[  914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[  914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0
[  914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[  914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[  914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20
[  914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb         pK-error
[  914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0
[  914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0

[  914.117583] ======================================================
[  914.117592] WARNING: possible circular locking dependency detected
[  914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G           OE
[  914.117611] ------------------------------------------------------
[  914.117618] ifconfig/2805 is trying to acquire lock:
[  914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470
[  914.117674]
               but task is already holding lock:
[  914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[  914.117872]
               which lock already depends on the new lock.

[  914.117880]
               the existing dependency chain (in reverse order) is:
[  914.117888]
               -> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}:
[  914.117910]        __mutex_lock+0xa0/0x9c0
[  914.117930]        mutex_lock_nested+0x1b/0x20
[  914.117944]        reg_process_self_managed_hints+0x3a/0xb0 [cfg80211]
[  914.118093]        wiphy_regulatory_register+0x47/0x80 [cfg80211]
[  914.118229]        wiphy_register+0x84f/0x9c0 [cfg80211]
[  914.118353]        ieee80211_register_hw+0x6b1/0xd90 [mac80211]
[  914.118486]        ath11k_mac_register+0x6af/0xb60 [ath11k]
[  914.118550]        ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k]
[  914.118598]        ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k]
[  914.118656]        process_one_work+0x228/0x670
[  914.118669]        worker_thread+0x4d/0x440
[  914.118680]        kthread+0x16d/0x1b0
[  914.118697]        ret_from_fork+0x22/0x30
[  914.118714]
               -> #2 (rtnl_mutex){+.+.}-{4:4}:
[  914.118736]        __mutex_lock+0xa0/0x9c0
[  914.118751]        mutex_lock_nested+0x1b/0x20
[  914.118767]        rtnl_lock+0x17/0x20
[  914.118783]        ath11k_regd_update+0x15a/0x260 [ath11k]
[  914.118841]        ath11k_regd_update_work+0x15/0x20 [ath11k]
[  914.118897]        process_one_work+0x228/0x670
[  914.118909]        worker_thread+0x4d/0x440
[  914.118920]        kthread+0x16d/0x1b0
[  914.118934]        ret_from_fork+0x22/0x30
[  914.118948]
               -> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}:
[  914.118972]        process_one_work+0x1fa/0x670
[  914.118984]        worker_thread+0x4d/0x440
[  914.118996]        kthread+0x16d/0x1b0
[  914.119010]        ret_from_fork+0x22/0x30
[  914.119023]
               -> #0 ((wq_completion)phy0){+.+.}-{0:0}:
[  914.119045]        __lock_acquire+0x146d/0x1cf0
[  914.119057]        lock_acquire+0x19b/0x360
[  914.119067]        flush_workqueue+0xae/0x470
[  914.119084]        ieee80211_stop_device+0x3b/0x50 [mac80211]
[  914.119260]        ieee80211_do_stop+0x5d7/0x830 [mac80211]
[  914.119409]        ieee80211_stop+0x45/0x180 [mac80211]
[  914.119557]        __dev_close_many+0xb3/0x120
[  914.119573]        __dev_change_flags+0xc3/0x1d0
[  914.119590]        dev_change_flags+0x29/0x70
[  914.119605]        devinet_ioctl+0x653/0x810
[  914.119620]        inet_ioctl+0x193/0x1e0
[  914.119631]        sock_do_ioctl+0x4d/0xf0
[  914.119649]        sock_ioctl+0x262/0x340
[  914.119665]        __x64_sys_ioctl+0x96/0xd0
[  914.119678]        do_syscall_64+0x3d/0xd0
[  914.119694]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  914.119709]
               other info that might help us debug this:

[  914.119717] Chain exists of:
                 (wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx

[  914.119745]  Possible unsafe locking scenario:

[  914.119752]        CPU0                    CPU1
[  914.119758]        ----                    ----
[  914.119765]   lock(&rdev->wiphy.mtx);
[  914.119778]                                lock(rtnl_mutex);
[  914.119792]                                lock(&rdev->wiphy.mtx);
[  914.119807]   lock((wq_completion)phy0);
[  914.119819]
                *** DEADLOCK ***

[  914.119827] 2 locks held by ifconfig/2805:
[  914.119837]  #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20
[  914.119872]  #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[  914.120039]
               stack backtrace:
[  914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G           OE     5.16.0-rc1-wt-ath+ #1
[  914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011
[  914.120074] Call Trace:
[  914.120084]  <TASK>
[  914.120094]  dump_stack_lvl+0x73/0xa4
[  914.120119]  dump_stack+0x10/0x12
[  914.120135]  print_circular_bug.isra.44+0x221/0x2e0
[  914.120165]  check_noncircular+0x106/0x150
[  914.120203]  __lock_acquire+0x146d/0x1cf0
[  914.120215]  ? __lock_acquire+0x146d/0x1cf0
[  914.120245]  lock_acquire+0x19b/0x360
[  914.120259]  ? flush_workqueue+0x87/0x470
[  914.120286]  ? lockdep_init_map_type+0x6b/0x250
[  914.120310]  flush_workqueue+0xae/0x470
[  914.120327]  ? flush_workqueue+0x87/0x470
[  914.120344]  ? lockdep_hardirqs_on+0xd7/0x150
[  914.120391]  ieee80211_stop_device+0x3b/0x50 [mac80211]
[  914.120565]  ? ieee80211_stop_device+0x3b/0x50 [mac80211]
[  914.120736]  ieee80211_do_stop+0x5d7/0x830 [mac80211]
[  914.120906]  ieee80211_stop+0x45/0x180 [mac80211]
[  914.121060]  __dev_close_many+0xb3/0x120
[  914.121081]  __dev_change_flags+0xc3/0x1d0
[  914.121109]  dev_change_flags+0x29/0x70
[  914.121131]  devinet_ioctl+0x653/0x810
[  914.121149]  ? __might_fault+0x77/0x80
[  914.121179]  inet_ioctl+0x193/0x1e0
[  914.121194]  ? inet_ioctl+0x193/0x1e0
[  914.121218]  ? __might_fault+0x77/0x80
[  914.121238]  ? _copy_to_user+0x68/0x80
[  914.121266]  sock_do_ioctl+0x4d/0xf0
[  914.121283]  ? inet_stream_connect+0x60/0x60
[  914.121297]  ? sock_do_ioctl+0x4d/0xf0
[  914.121329]  sock_ioctl+0x262/0x340
[  914.121347]  ? sock_ioctl+0x262/0x340
[  914.121362]  ? exit_to_user_mode_prepare+0x13b/0x280
[  914.121388]  ? syscall_enter_from_user_mode+0x20/0x50
[  914.121416]  __x64_sys_ioctl+0x96/0xd0
[  914.121430]  ? br_ioctl_call+0x90/0x90
[  914.121445]  ? __x64_sys_ioctl+0x96/0xd0
[  914.121465]  do_syscall_64+0x3d/0xd0
[  914.121482]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  914.121497] RIP: 0033:0x7f0ed051737b
[  914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48
[  914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[  914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b
[  914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004
[  914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001
[  914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe
[  914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000
[  914.121620]  </TASK>

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211201071745.17746-2-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcutorture: Avoid soft lockup during cpu stall

[ Upstream commit 5ff7c9f9d7e3e0f6db5b81945fa11b69d62f433a ]

If we use the module stall_cpu option, we may get a soft lockup warning
in case we also don't pass the stall_cpu_block option.

Introduce the stall_no_softlockup option to avoid a soft lockup on
cpu stall even if we don't use the stall_cpu_block option.

Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: avoid clearing a just saved session protection id

[ Upstream commit 8e967c137df3b236d2075f9538cb888129425d1a ]

When scheduling a session protection the id is saved but
then it may be cleared when calling iwl_mvm_te_clear_data
(if a previous session protection is currently active).
Fix it by saving the id after calling iwl_mvm_te_clear_data.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.b0743a588d14.I098fef6677d0dab3ef1b6183ed206a10bab01eb2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: synchronize with FW after multicast commands

[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ]

If userspace installs a lot of multicast groups very quickly, then
we may run out of command queue space as we send the updates in an
asynchronous fashion (due to locking concerns), and the CPU can
create them faster than the firmware can process them. This is true
even when mac80211 has a work struct that gets scheduled.

Fix this by synchronizing with the firmware after sending all those
commands - outside of the iteration we can send a synchronous echo
command that just has the effect of the CPU waiting for the prior
asynchronous commands to finish. This also will cause fewer of the
commands to be sent to the firmware overall, because the work will
only run once when rescheduled multiple times while it's running.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649
Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reported-by: Maximilian Ernestus <maximilian@ernestus.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: Fix thermal bindings

[ Upstream commit 82ce79391d0ec25ec8aaae3c0617b71048ff0836 ]

The binding node names for the thermal zones are not successfully
validated by the dt-schemas.

Fix the validation by changing from sensor-thermalN or thermal-sensor-N
to sensorN-thermal.  Provide node labels of the form sensorN_thermal to
ensure consistency with the other platform implementations.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211104224033.3997504-1-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thunderbolt: Runtime PM activate both ends of the device link

[ Upstream commit f3380cac0c0b3a6f49ab161e2a057c363962f48d ]

If protocol tunnels are already up when the driver is loaded, for
instance if the boot firmware implements connection manager of its own,
runtime PM reference count of the consumer devices behind the tunnel
might have been increased already before the device link is created but
the supplier device runtime PM reference count is not. This leads to a
situation where the supplier (the Thunderbolt driver) can runtime
suspend even if it should not because the corresponding protocol tunnel
needs to be up causing the devices to be removed from the corresponding
native bus.

Prevent this from happening by making both sides of the link runtime PM
active briefly. The pm_runtime_put() for the consumer (PCIe
root/downstream port, xHCI) then allows it to runtime suspend again but
keeps the supplier runtime resumed the whole time it is runtime active.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: m920x: don't use stack on USB reads

[ Upstream commit a2ab06d7c4d6bfd0b545a768247a70463e977e27 ]

Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.

Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().

Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/
Reported-by: rkardell@mida.se
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atomisp: fix "variable dereferenced before check 'asd'"

[ Upstream commit ac56760a8bbb4e654b2fd54e5de79dd5d72f937d ]

There are two occurrences where the variable 'asd' is dereferenced
before check. Fix this issue by using the variable after the check.

Link: https://lore.kernel.org/linux-media/20211122074122.GA6581@kili/
Link: https://lore.kernel.org/linux-media/20211201141904.47231-1-kitakar@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()

[ Upstream commit 348df8035301dd212e3cc2860efe4c86cb0d3303 ]

In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release()
will be called and there is a dereference of dev->vv_data in
saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init() according to the following logic.

Both hexium_attach() and hexium_detach() are callback functions of
the variable 'extension', so there exists a possible call chain directly
from hexium_attach() to hexium_detach():

hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data
|      in saa7146_vv_init().
|
|
hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release()

Fix this bug by adding a check of saa7146_vv_init().

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings,
and our static analyzer no longer warns about this code.

Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rcar-vin: Update format alignment constraints

[ Upstream commit da6911f330d40cfe115a37249e47643eff555e82 ]

This change fixes two issues with the size constraints for buffers.

- There is no width alignment constraint for RGB formats. Prior to this
  change they were treated as YUV and as a result were more restricted
  than needed. Add a new check to differentiate between the two.

- The minimum width and height supported is 5x2, not 2x4, this is an
  artifact from the driver's soc-camera days. Fix this incorrect
  assumption.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds.

[ Upstream commit c8ed7d2f614cd8b315981d116c7a2fb01829500d ]

Some uvc devices appear to require the maximum allowed USB timeout
for GET_CUR/SET_CUR requests.

So lets just bump the UVC control timeout to 5 seconds which is the
same as the usb ctrl get/set defaults:
USB_CTRL_GET_TIMEOUT 5000
USB_CTRL_SET_TIMEOUT 5000

It fixes the following runtime warnings:
   Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1).
   Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2).

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: rcar-du: Fix CRTC timings when CMM is used

[ Upstream commit f0ce591dc9a97067c6e783a2eaccd22c5476144d ]

When the CMM is enabled, an offset of 25 pixels must be subtracted from
the HDS (horizontal display start) and HDE (horizontal display end)
registers. Fix the timings calculation, and take this into account in
the mode validation.

This fixes a visible horizontal offset in the image with VGA monitors.
HDMI monitors seem to be generally more tolerant to incorrect timings,
but may be affected too.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Flush global TLB when switching to trampoline page-table

[ Upstream commit 71d5049b053876afbde6c3273250b76935494ab2 ]

Move the switching code into a function so that it can be re-used and
add a global TLB flush. This makes sure that usage of memory which is
not mapped in the trampoline page-table is reliably caught.

Also move the clearing of CR4.PCIDE before the CR3 switch because the
cr4_clear_bits() function will access data not mapped into the
trampoline page-table.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211202153226.22946-4-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

floppy: Add max size check for user space request

[ Upstream commit 545a32498c536ee152331cd2e7d2416aa0f20e01 ]

We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.

WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline]
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356
Modules linked in:
CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344
Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9
RSP: 0018:ffffc90023b87850 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff92004770f0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000033 RDI: 0000000000010cc1
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff81bb4686 R11: 0000000000000001 R12: ffffffff902c1960
R13: 0000000000000033 R14: 0000000000000000 R15: ffff88804cf64a30
FS:  0000000000000000(0000) GS:ffff88802cd00000(0063) knlGS:00000000f44b4b40
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002c921000 CR3: 000000004f507000 CR4: 0000000000150ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
 __get_free_pages+0x8/0x40 mm/page_alloc.c:5418
 raw_cmd_copyin drivers/block/floppy.c:3113 [inline]
 raw_cmd_ioctl drivers/block/floppy.c:3160 [inline]
 fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528
 fd_ioctl drivers/block/floppy.c:3555 [inline]
 fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869
 compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662
 __do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972
 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
 __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
 do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Reported-by: syzbot+23a02c7df2cf2bc93fa2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211116131033.27685-1-sxwjean@me.com
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: uhci: add aspeed ast2600 uhci support

[ Upstream commit 554abfe2eadec97d12c71d4a69da1518478f69eb ]

Enable ast2600 uhci quirks.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20211126100021.2331024-1-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node

[ Upstream commit 3f92a5be6084b77f764a8bbb881ac0d12cb9e863 ]

Fix 'dtbs_check' in serdes_ln_ctrl (mux@4080) node by changing the node
name to mux-controller@4080.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-3-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node

[ Upstream commit 4d3984906397581dc0ccb6a02bf16b6ff82c9192 ]

Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win

[ Upstream commit 57d2dbf710d832841872fb15ebb79429cab90fae ]

The GPD win and its sibling the GPD pocket (99% the same electronics in a
different case) use a PCI wifi card. But the ACPI tables on both variants
contain a bug where the SDIO MMC controller for SDIO wifi cards is enabled
despite this. This SDIO MMC controller has a PCI0.SDHB.BRC1 child-device
which _PS3 method sets a GPIO causing the PCI wifi card to turn off.

At the moment there is a pretty ugly kludge in the sdhci-acpi.c code,
just to work around the bug in the DSDT of this single design. This can
be solved cleaner/simply with a quirk overriding the _STA return of the
broken PCI0.SDHB.BRC1 PCI0.SDHB.BRC1 child with a status value of 0,
so that its power_manageable flag gets cleared, avoiding this problem.

Note that even though it is not used, the _STA method for the MMC
controller is deliberately not overridden. If the status of the MMC
controller were forced to 0 it would never get suspended, which would
cause these mini-laptops to not reach S0i3 level when suspended.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / x86: Allow specifying acpi_device_override_status() quirks by path

[ Upstream commit ba46e42e925b5d09b4e441f8de3db119cc7df58f ]

Not all ACPI-devices have a HID + UID, allow specifying quirks for
acpi_device_override_status() by path too.

Note this moves the path/HID+UID check to after the CPU + DMI checks
since the path lookup is somewhat costly.

This way this lookup is only done on devices where the other checks
match.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: Change acpi_device_always_present() into acpi_device_override_status()

[ Upstream commit 1a68b346a2c9969c05e80a3b99a9ab160b5655c0 ]

Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.

In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.

Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table

[ Upstream commit d431dfb764b145369be820fcdfd50f2159b9bbc2 ]

It turns out that there is a WMI object which controls the PWM2 device
used for the keyboard backlight and that WMI object also provides some
other useful functionality.

The upcoming lenovo-yogabook-wmi driver will offer both backlight
control and the other functionality, so there no longer is a need
to have the lpss-pwm driver binding to PWM2 for backlight control;
and this is now actually undesirable because this will cause both
the WMI code and the lpss-pwm driver to poke at the same PWM
controller.

Drop the always-present quirk for the PWM2 ACPI-device, so that the
 lpss-pwm controller will no longer bind to it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Introduce a new placement for MOB page tables

[ Upstream commit f6be23264bbac88d1e2bb39658e1b8a397e3f46d ]

For larger (bigger than a page) and noncontiguous mobs we have
to create page tables that allow the host to find the memory.
Those page tables just used regular system memory. Unfortunately
in TTM those BO's are not allowed to be busy thus can't be
fenced and we have to fence those bo's  because we don't want
to destroy the page tables while the host is still executing
the command buffers which might be accessing them.

To solve it we introduce a new placement VMW_PL_SYSTEM which
is very similar to TTM_PL_SYSTEM except that it allows
fencing. This fixes kernel oops'es during unloading of the driver
(and pci hot remove/add) which were caused by busy BO's in
TTM_PL_SYSTEM being present in the delayed deletion list in
TTM (TTM_PL_SYSTEM manager is destroyed before the delayed
deletions are executed)

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105193845.258816-5-zackr@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Release ttm memory if probe fails

[ Upstream commit 28b5f3b6121b7db2a44be499cfca0b6b801588b6 ]

The ttm mem global state was leaking if the vmwgfx driver load failed.

In case of a driver load failure we have to make sure we also release
the ttm mem global state.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105193845.258816-3-zackr@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: da9121: Prevent current limit change when enabled

[ Upstream commit 24f0853228f3b98f1ef08d5824376c69bb8124d2 ]

Prevent changing current limit when enabled as a precaution against
possibile instability due to tight integration with switching cycle

Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com>
Link: https://lore.kernel.org/r/52ee682476004a1736c1e0293358987319c1c415.1638223185.git.Adam.Ward.opensource@diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: avoid calling core_clk_setrate() concurrently during concurrent video sessions

[ Upstream commit 91f2b7d269e5c885c38c7ffa261f5276bd42f907 ]

In existing implementation, core_clk_setrate() is getting called
concurrently in concurrent video sessions. Before the previous call to
core_clk_setrate returns, new call to core_clk_setrate is invoked from
another video session running concurrently. This results in latest
calculated frequency being set (higher/lower) instead of actual frequency
required for that video session. It also results in stability crashes
mention below. These resources are specific to video core, hence keeping
under core lock would ensure that they are estimated for all running video
sessions and called once for the video core.

Crash logs:

[    1.900089] WARNING: CPU: 4 PID: 1 at drivers/opp/debugfs.c:33 opp_debug_remove_one+0x2c/0x48
[    1.908493] Modules linked in:
[    1.911524] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.67 #35 f8edb8c30cf2dd6838495dd9ef9be47af7f5f60c
[    1.921036] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT)
[    1.928673] pstate: 60800009 (nZCv daif -PAN +UAO -TCO BTYPE=--)
[    1.934608] pc : opp_debug_remove_one+0x2c/0x48
[    1.939080] lr : opp_debug_remove_one+0x2c/0x48
[    1.943560] sp : ffffffc011d7b7f0
[    1.946836] pmr_save: 000000e0
[    1.949854] x29: ffffffc011d7b7f0 x28: ffffffc010733bbc
[    1.955104] x27: ffffffc010733ba8 x26: ffffff8083cedd00
[    1.960355] x25: 0000000000000001 x24: 0000000000000000
[    1.965603] x23: ffffff8083cc2878 x22: ffffff8083ceb900
[    1.970852] x21: ffffff8083ceb910 x20: ffffff8083cc2800
[    1.976101] x19: ffffff8083ceb900 x18: 00000000ffff0a10
[    1.981352] x17: ffffff80837a5620 x16: 00000000000000ec
[    1.986601] x15: ffffffc010519ad4 x14: 0000000000000003
[    1.991849] x13: 0000000000000004 x12: 0000000000000001
[    1.997100] x11: c0000000ffffdfff x10: 00000000ffffffff
[    2.002348] x9 : d2627c580300dc00 x8 : d2627c580300dc00
[    2.007596] x7 : 0720072007200720 x6 : ffffff80802ecf00
[    2.012845] x5 : 0000000000190004 x4 : 0000000000000000
[    2.018094] x3 : ffffffc011d7b478 x2 : ffffffc011d7b480
[    2.023343] x1 : 00000000ffffdfff x0 : 0000000000000017
[    2.028594] Call trace:
[    2.031022]  opp_debug_remove_one+0x2c/0x48
[    2.035160]  dev_pm_opp_put+0x94/0xb0
[    2.038780]  _opp_remove_all+0x7c/0xc8
[    2.042486]  _opp_remove_all_static+0x54/0x7c
[    2.046796]  dev_pm_opp_remove_table+0x74/0x98
[    2.051183]  devm_pm_opp_of_table_release+0x18/0x24
[    2.056001]  devm_action_release+0x1c/0x28
[    2.060053]  release_nodes+0x23c/0x2b8
[    2.063760]  devres_release_group+0xcc/0xd0
[    2.067900]  component_bind+0xac/0x168
[    2.071608]  component_bind_all+0x98/0x124
[    2.075664]  msm_drm_bind+0x1e8/0x678
[    2.079287]  try_to_bring_up_master+0x60/0x134
[    2.083674]  component_master_add_with_match+0xd8/0x120
[    2.088834]  msm_pdev_probe+0x20c/0x2a0
[    2.092629]  platform_drv_probe+0x9c/0xbc
[    2.096598]  really_probe+0x11c/0x46c
[    2.100217]  driver_probe_device+0x8c/0xf0
[    2.104270]  device_driver_attach+0x54/0x78
[    2.108407]  __driver_attach+0x48/0x148
[    2.112201]  bus_for_each_dev+0x88/0xd4
[    2.115998]  driver_attach+0x2c/0x38
[    2.119534]  bus_add_driver+0x10c/0x200
[    2.123330]  driver_register+0x6c/0x104
[    2.127122]  __platform_driver_register+0x4c/0x58
[    2.131767]  msm_drm_register+0x6c/0x70
[    2.135560]  do_one_initcall+0x64/0x23c
[    2.139357]  do_initcall_level+0xac/0x15c
[    2.143321]  do_initcalls+0x5c/0x9c
[    2.146778]  do_basic_setup+0x2c/0x38
[    2.150401]  kernel_init_freeable+0xf8/0x15c
[    2.154622]  kernel_init+0x1c/0x11c
[    2.158079]  ret_from_fork+0x10/0x30
[    2.161615] ---[ end trace a2cc45a0f784b212 ]---

[    2.166272] Removing OPP: 300000000

Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: Avoid NULL ptr access during mgmt tx cleanup

[ Upstream commit a93789ae541c7d5c1c2a4942013adb6bcc5e2848 ]

Currently 'ar' reference is not added in skb_cb during
WMI mgmt tx. Though this is generally not used during tx completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar ptr from skb_cb from mgmt txmgmt_idr. Hence
fill them during tx call for proper usage.

Also free the skb which is missing currently in these
callbacks.

Crash_info:

[19282.489476] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[19282.489515] pgd = 91eb8000
[19282.496702] [00000000] *pgd=00000000
[19282.502524] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[19282.783728] PC is at ath11k_mac_vif_txmgmt_idr_remove+0x28/0xd8 [ath11k]
[19282.789170] LR is at idr_for_each+0xa0/0xc8

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1637832614-13831-1-git-send-email-quic_srirrama@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rsi: Fix out-of-bounds read in rsi_read_pkt()

[ Upstream commit f1cb3476e48b60c450ec3a1d7da0805bffc6e43a ]

rsi_get_* functions rely on an offset variable from usb
input. The size of usb input is RSI_MAX_RX_USB_PKT_SIZE(3000),
while 2-byte offset can be up to 0xFFFF. Thus a large offset
can cause out-of-bounds read.

The patch adds a bound checking condition when rcv_pkt_len is 0,
indicating it's USB. It's unclear whether this is triggerable
from other type of bus. The following check might help in that case.
offset > rcv_pkt_len - FRAME_DESC_SZ

The bug is trigerrable with conpromised/malfunctioning USB devices.
I tested the patch with the crashing input and got no more bug report.

Attached is the KASAN report from fuzzing.

BUG: KASAN: slab-out-of-bounds in rsi_read_pkt+0x42e/0x500 [rsi_91x]
Read of size 2 at addr ffff888019439fdb by task RX-Thread/227

CPU: 0 PID: 227 Comm: RX-Thread Not tainted 5.6.0 #66
Call Trace:
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? rsi_read_pkt+0x42e/0x500 [rsi_91x]
 ? rsi_read_pkt+0x42e/0x500 [rsi_91x]
 __kasan_report.cold+0x37/0x7c
 ? rsi_read_pkt+0x42e/0x500 [rsi_91x]
 kasan_report+0xe/0x20
 rsi_read_pkt+0x42e/0x500 [rsi_91x]
 rsi_usb_rx_thread+0x1b1/0x2fc [rsi_usb]
 ? rsi_probe+0x16a0/0x16a0 [rsi_usb]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __wake_up_common+0x10b/0x520
 ? rsi_probe+0x16a0/0x16a0 [rsi_usb]
 kthread+0x2b5/0x3b0
 ? kthread_create_on_node+0xd0/0xd0
 ret_from_fork+0x22/0x40

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXxXS4wgu2OsmlVv@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

rsi: Fix use-after-free in rsi_rx_done_handler()

[ Upstream commit b07e3c6ebc0c20c772c0f54042e430acec2945c3 ]

When freeing rx_cb->rx_skb, the pointer is not set to NULL,
a later rsi_rx_done_handler call will try to read the freed
address.
This bug will very likley lead to double free, although
detected early as use-after-free bug.

The bug is triggerable with a compromised/malfunctional usb
device. After applying the patch, the same input no longer
triggers the use-after-free.

Attached is the kasan report from fuzzing.

BUG: KASAN: use-after-free in rsi_rx_done_handler+0x354/0x430 [rsi_usb]
Read of size 4 at addr ffff8880188e5930 by task modprobe/231
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 __kasan_report.cold+0x37/0x7c
 ? dma_direct_unmap_page+0x90/0x110
 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 kasan_report+0xe/0x20
 rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __usb_hcd_giveback_urb+0x380/0x380
 ? apic_timer_interrupt+0xa/0x20
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 ? handle_irq_event+0xcd/0x157
 ? handle_edge_irq+0x1eb/0x7b0
 irq_exit+0x114/0x140
 do_IRQ+0x91/0x1e0
 common_interrupt+0xf/0xf
 </IRQ>

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXxQL/vIiYcZUu/j@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: Fix skb_over_panic in mwifiex_usb_recv()

[ Upstream commit 04d80663f67ccef893061b49ec8a42ff7045ae84 ]

Currently, with an unknown recv_type, mwifiex_usb_recv
just return -1 without restoring the skb. Next time
mwifiex_usb_rx_complete is invoked with the same skb,
calling skb_put causes skb_over_panic.

The bug is triggerable with a compromised/malfunctioning
usb device. After applying the patch, skb_over_panic
no longer shows up with the same input.

Attached is the panic report from fuzzing.
skbuff: skb_over_panic: text:000000003bf1b5fa
 len:2048 put:4 head:00000000dd6a115b data:000000000a9445d8
 tail:0x844 end:0x840 dev:<NULL>
kernel BUG at net/core/skbuff.c:109!
invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60
RIP: 0010:skb_panic+0x15f/0x161
Call Trace:
 <IRQ>
 ? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
 skb_put.cold+0x24/0x24
 mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20
 </IRQ>

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YX4CqjfRcTa6bVL+@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: jitter - consider 32 LSB for APT

[ Upstream commit 552d03a223eda3df84526ab2c1f4d82e15eaee7a ]

The APT compares the current time stamp with a pre-set value. The
current code only considered the 4 LSB only. Yet, after reviews by
mathematicians of the user space Jitter RNG version >= 3.1.0, it was
concluded that the APT can be calculated on the 32 LSB of the time
delta. Thi change is applied to the kernel.

This fixes a bug where an AMD EPYC fails this test as its RDTSC value
contains zeros in the LSB. The most appropriate fix would have been to
apply a GCD calculation and divide the time stamp by the GCD. Yet, this
is a significant code change that will be considered for a future
update. Note, tests showed that constantly the GCD always was 32 on
these systems, i.e. the 5 LSB were always zero (thus failing the APT
since it only considered the 4 LSB for its calculation).

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: core: Fix return freed object in hsi_new_client

[ Upstream commit a1ee1c08fcd5af03187dcd41dcab12fd5b379555 ]

cl is freed on error of calling device_register, but this
object is return later, which will cause uaf issue. Fix it
by return NULL on error.

Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use

[ Upstream commit bdfd6ab8fdccd8b138837efff66f4a1911496378 ]

If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.

I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.

Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()

[ Upstream commit 028e083832b06fdeeb290e1e57dc1f6702c4c215 ]

The UCR4_OREN should be disabled before disabling the uart receiver in
.stop_rx() instead of in the .shutdown().

Otherwise, if we have the overrun error during the receiver disable
process, the overrun interrupt will keep trigging until we disable the
OREN interrupt in the .shutdown(), because the ORE status can only be
cleared when read the rx FIFO or reset the controller.  Although the
called time between the receiver disable and OREN disable in .shutdown()
is very short, there is still the risk of endless interrupt during this
short period of time. So here change to disable OREN before the receiver
been disabled in .stop_rx().

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20211125020349.4980-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mxser: keep only !tty test in ISR

[ Upstream commit 274ab58dc2b460cc474ffc7ccfcede4b2be1a3f5 ]

The others are superfluous with tty refcounting in place now. And they
are racy in fact:
* tty_port_initialized() reports false for a small moment after
  interrupts are enabled.
* closing is 1 while the port is still alive.

The queues are flushed later during close anyway. So there is no need
for this special handling. Actually, the ISR should not flush the
queues. It should behave as every other driver, just queue the chars
into tty buffer and go on. But this will be changed later. There is
still a lot code depending on having tty in ISR (and not only tty_port).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211118073125.12283-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: megachips: Ensure both bridges are probed before registration

[ Upstream commit 11632d4aa2b3f126790e81a4415d6c23103cf8bb ]

In the configuration used by the b850v3, the STDP2690 is used to read EDID
data whilst it's the STDP4028 which can detect when monitors are connected.

This can result in problems at boot with monitors connected when the
STDP4028 is probed first, a monitor is detected and an attempt is made to
read the EDID data before the STDP2690 has probed:

[    3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018
[    3.803845] pgd = (ptrval)
[    3.806581] [00000018] *pgd=00000000
[    3.810180] Internal error: Oops: 5 [#1] SMP ARM
[    3.814813] Modules linked in:
[    3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1
[    3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[    3.830705] Workqueue: events_unbound deferred_probe_work_func
[    3.836565] PC is at stdp2690_get_edid+0x44/0x19c
[    3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c
[    3.846526] pc : [<805eae10>]    lr : [<805eb138>]    psr: 80000013
[    3.852802] sp : 81c359d0  ip : 7dbb550b  fp : 81c35a1c
[    3.858037] r10: 81c73840  r9 : 81c73894  r8 : 816d9800
[    3.863270] r7 : 00000000  r6 : 81c34000  r5 : 00000000  r4 : 810c35f0
[    3.869808] r3 : 80e3e294  r2 : 00000080  r1 : 00000cc0  r0 : 81401180
[    3.876349] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.883499] Control: 10c5387d  Table: 1000404a  DAC: 00000051
[    3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0
[    3.897034] Register r1 information: non-paged memory
[    3.902097] Register r2 information: non-paged memory
[    3.907160] Register r3 information: non-slab/vmalloc memory
[    3.912832] Register r4 information: non-slab/vmalloc memory
[    3.918503] Register r5 information: NULL pointer
[    3.923217] Register r6 information: non-slab/vmalloc memory
[    3.928887] Register r7 information: NULL pointer
[    3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024
[    3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048
[    3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048
[    3.959873] Register r11 information: non-slab/vmalloc memory
[    3.965632] Register r12 information: non-paged memory
[    3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval))
[    3.977148] Stack: (0x81c359d0 to 0x81c36000)
[    3.981517] 59c0:                                     80b2b668 80b2b5bc 000002e2 0000034e
[    3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0
[    3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8
[    4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848
[    4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800
[    4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000
[    4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000
[    4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8
[    4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0
[    4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950
[    4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059
[    4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400
[    4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008
[    4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340
[    4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000
[    4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4
[    4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40
[    4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800
[    4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28
[    4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700
[    4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68
[    4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88
[    4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0
[    4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60
[    4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58
[    4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c
[    4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800
[    4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48
[    4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c
[    4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90
[    4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0
[    4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8
[    4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c
[    4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810
[    4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c
[    4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c
[    4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68
[    4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080
[    4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650
[    4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90
[    4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800
[    4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc
[    4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18
[    4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298
[    4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000
[    4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20
[    4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000
[    4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000
[    4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    4.391155] Backtrace:
[    4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c)
[    4.402691]  r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840
[    4.410534]  r4:810c35f0
[    4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c)
[    4.424240]  r5:00000045 r4:810c35f0
[    4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384)
[    4.439074]  r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8
[    4.446917]  r4:00000008
[    4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4)
[    4.460713]  r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010
[    4.468556]  r4:81fbb700
[    4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0)
[    4.482434]  r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800
[    4.490276]  r4:81fbb700
[    4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4)
[    4.502494]  r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800
[    4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130)
[    4.516805]  r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800
[    4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0)
[    4.531116]  r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240
[    4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184)
[    4.545597]  r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80
[    4.553440]  r4:81fe9740
[    4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20)
[    4.563921]  r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440
[    4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8)
[    4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8)
[    4.585908]  r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000
[    4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460)
[    4.601524]  r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810
[    4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230)
[    4.615658]  r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810
[    4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0)
[    4.630313]  r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310
[    4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c)
[    4.647227]  r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001
[    4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8)
[    4.663794]  r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000
[    4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190)
[    4.677753]  r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810
[    4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20)
[    4.691971]  r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080
[    4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c)
[    4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0)
[    4.716305]  r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080
[    4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c)
[    4.731139]  r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00
[    4.738981]  r4:810c50c0 r3:80615bc0
[    4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570)
[    4.750765]  r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800
[    4.758608]  r4:817eeb00
[    4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190)
[    4.768574]  r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00
[    4.776417]  r4:817efa40
[    4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24)
[    4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8)
[    4.791266] 5fa0:                                     00000000 00000000 00000000 00000000
[    4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    4.814279]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8
[    4.822120]  r4:817efa40
[    4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018)

Split the registration from the STDP4028 probe routine and only perform
registration once both the STDP4028 and STDP2690 have probed.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
CC: Peter Senna Tschudin <peter.senna@gmail.com>
CC: Martyn Welch <martyn.welch@collabora.co.uk>
CC: Neil Armstrong <narmstrong@baylibre.com>
CC: Robert Foss <robert.foss@linaro.org>
CC: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
CC: Jonas Karlman <jonas@kwiboo.se>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>