Stefano Babic [Tue, 11 Oct 2011 17:18:05 +0000 (19:18 +0200)]
misc: pmic: use I2C_SET_BUS in pmic I2C
Instead of using directly the i2c_set_bus() function,
the I2C_SET_BUS macro must be used to avoid build
errors for targets without multibus I2C.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Thu, 6 Oct 2011 09:44:26 +0000 (11:44 +0200)]
MX5: efikamx/efikasb: use new pmic driver
Switch to new pmic generic driver.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Stefano Babic [Thu, 6 Oct 2011 09:23:33 +0000 (11:23 +0200)]
MX3: qong: use new pmic driver
Switch to new pmic generic driver.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 2 Oct 2011 16:38:43 +0000 (18:38 +0200)]
RTC: Switch mc13783 to generic pmic code
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 2 Oct 2011 10:58:03 +0000 (12:58 +0200)]
MX5: vision2: use new pmic driver
Switch to new pmic generic driver.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Wed, 5 Oct 2011 10:38:27 +0000 (12:38 +0200)]
misc: pmic: Freescale PMIC switches to generic PMIC driver
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Łukasz Majewski [Mon, 3 Oct 2011 19:45:51 +0000 (19:45 +0000)]
misc:pmic:samsung Enable PMIC driver at GONI target
Enable support for new PMIC driver at GONI reference target.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Łukasz Majewski [Mon, 3 Oct 2011 19:45:50 +0000 (19:45 +0000)]
misc:pmic:max8998 MAX8998 support at a new PMIC driver.
This commit adds support for MAX8998 PMIC driver.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Łukasz Majewski [Thu, 6 Oct 2011 02:37:34 +0000 (02:37 +0000)]
misc:pmic:core New generic PMIC driver
I2C or SPI PMIC devices can be accessed.
Separate files: pmic_i2c.c and pmic_spi.c are responsible
for handling transmission over I2C or SPI bus.
New flags:
CONFIG_PMIC - enable PMIC general device.
CONFIG_PMIC_I2C/SPI - specify the interface to be used.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Mon, 12 Sep 2011 06:32:34 +0000 (06:32 +0000)]
mx31pdk: Remove unneeded config
Currently there are two config options for building a U-boot binary for MX31PDK:
make mx31pdk_config
or,
make mx31pdk_nand_config
mx31pdk_config was developed first when no NAND SPL support was available for
MX31 and it requires that the U-boot binary is loaded into RAM via JTAG and it
forces SKIP_LOWLEVEL_INIT.
mx31pdk_nand_config was added later and it allows booting from NAND Flash.
Leave just one config option called mx31pdk so that it produces a binary that can boot from NAND Flash.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Helmut Raiger [Thu, 29 Sep 2011 05:45:03 +0000 (05:45 +0000)]
mx31: provide readable WEIM CS accessor
setup_weimcs() and some macros are added to support the setup
for i.MX31 WEIM chip selects. As a compromise between verbosity
and readability an ASCII-art'ish bit comment is used instead of
bitfields.
All i.MX31 boards have been patched to use this approach using a
helper program to verify the changes.
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Fri, 21 Jan 2011 16:39:03 +0000 (17:39 +0100)]
MX51: vision2: Set global macros
Adapt vision2 to the current u-boot version. Drop
own macros to set global data and use the common ones.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Marek Vasut [Tue, 27 Sep 2011 06:34:11 +0000 (06:34 +0000)]
I2C: Add i2c_get/set_speed() to mxc_i2c.c
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Marek Vasut [Sun, 11 Sep 2011 17:54:52 +0000 (17:54 +0000)]
ARM: Update mach-types
This commit updates the mach-types based on the latest in Linus's head
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Simon Schwarz [Fri, 30 Sep 2011 00:41:34 +0000 (00:41 +0000)]
devkit8000: Add config to enable SPL MMC boot
Add MMC boot configs to devkit8000 config.
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
Simon Schwarz [Fri, 30 Sep 2011 00:41:33 +0000 (00:41 +0000)]
devkit8000: protect board_mmc_init
This function is also defined in omap-common/spl_mmc.de so the implementation
in devkit8000.c was protected by a ifdef.
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
Heiko Schocher [Wed, 14 Sep 2011 19:34:33 +0000 (19:34 +0000)]
arm, post: add missing post_time_ms for arm
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Heiko Schocher [Wed, 12 Oct 2011 01:18:05 +0000 (01:18 +0000)]
cosmetic, post: Codingstyle cleanup
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Wed, 12 Oct 2011 01:13:38 +0000 (01:13 +0000)]
arm, logbuffer: make it compileclean
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Tom Warren [Wed, 21 Sep 2011 12:40:07 +0000 (12:40 +0000)]
tegra2: Enable MMC for Seaboard
This adds the required GPIO and pinmux configuration to make eMMC / SD work
on Seaboard.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Wed, 21 Sep 2011 12:40:06 +0000 (12:40 +0000)]
tegra2: Add more pinmux functions
This adds support for changing pinmux functions of pin groups. This is done
by defining a PMUX_FUNC_... enum which can be used to select the function for
each group using pinmux_set_func(). It is also possible to enable
pullup/pulldown, and the existing tristate functionality is retained.
Also provided is a means of configuring a list of pingroups by providing a
configuration table to pinmux_config_table().
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Wed, 21 Sep 2011 12:40:05 +0000 (12:40 +0000)]
tegra2: Rename PIN_ to PINGRP_
The pin groupings are better named PINGRP, since on Tegra2 they refer to
multiple pins.
Sorry about this, but better to get it right now when there is only a small
amount of code affected.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Wed, 21 Sep 2011 12:40:04 +0000 (12:40 +0000)]
tegra2: Add more clock functions
This adds most of the clock functions required by board and driver code:
-query and adjust peripheral clocks
-query and adjust PLLs
-reset and enable control
These functions are plumbed in as required.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Wed, 21 Sep 2011 12:40:03 +0000 (12:40 +0000)]
tegra2: Clean up board code a little
This removes clock_init() and pinmux_init() which are names better suited
to those respective modules. By moving board_init_f() to the bottom of the
file we can remove the need for so many functions in the board.h header file.
The only clock/pinmux/gpio init we need to do prior to relocation is
for the UART.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Wed, 21 Sep 2011 12:40:02 +0000 (12:40 +0000)]
tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
Rename CLOCK_PLL_ID to CLOCK_ID which takes account of the fact that the
code now deals with both PLL clocks and source clocks.
This also tidied up the assert() to match the one sent upstream, and fixes
an error in the PWM id.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
Donggeun Kim [Mon, 24 Oct 2011 21:15:28 +0000 (21:15 +0000)]
FAT: Add FAT write feature
In some cases, saving data in RAM as a file with FAT format is required.
This patch allows the file to be written in FAT formatted partition.
The usage is similar with reading a file.
First, fat_register_device function is called before file_fat_write function
in order to set target partition.
Then, file_fat_write function is invoked with desired file name,
start ram address for writing data, and file size.
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Simon Glass [Mon, 24 Oct 2011 19:15:34 +0000 (19:15 +0000)]
fdt: ARM: Add fdtcontroladdr to set device tree address in environment
This adds support for a new environment variable called 'fdtcontroladdr'. If
defined, the hex address is used as the address of the control fdt for U-Boot.
Note: I have not changed CONFIG_PRAM section as I already have an
outstanding patch on that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 19:15:33 +0000 (19:15 +0000)]
fdt: ARM: Implement and verify embedded and separate device tree
This locates the device tree either embedded within U-Boot or attached to the
end as a separate binary.
When CONFIG_OF_CONTROL is defined, U-Boot requires a valid fdt. A check is
provided for this early in initialisation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 19:15:32 +0000 (19:15 +0000)]
fdt: add decode helper library
This library provides useful functions to drivers which want to use
the fdt to control their operation. Functions are provided to:
- look up and enumerate a device type (for example assigning i2c bus 0,
i2c bus 1, etc.)
- decode basic types from the fdt, like addresses and integers
While this library is not strictly necessary, it helps to minimise the
changes to a driver, in order to make it work under fdt control. Less
code is required, and so the barrier to switch drivers over is lower.
Additional functions to read arrays and GPIOs could be made available
here also.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 19:15:31 +0000 (19:15 +0000)]
fdt: Add support for a separate device tree (CONFIG_OF_SEPARATE)
This adds support for an FDT to be build as a separate binary file called
u-boot.dtb. This can be concatenated with the U-Boot binary to provide a
device tree located at run-time by U-Boot. The Makefile is modified to
provide this file in u-boot-dtb.bin.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 15 Oct 2011 05:48:21 +0000 (05:48 +0000)]
fdt: Add support for embedded device tree (CONFIG_OF_EMBED)
This new option allows U-Boot to embed a binary device tree into its image
to allow run-time control of peripherals. This device tree is for U-Boot's
own use and is not necessarily the same one as is passed to the kernel.
The device tree compiler output should be placed in the $(obj)
rooted tree. Since $(OBJCOPY) insists on adding the path to the
generated symbol names, to ensure consistency it should be
invoked from the directory where the .dtb file is located and
given the input file name without the path.
This commit contains my entry for the ugliest Makefile / shell interaction
competition.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 15 Oct 2011 05:48:20 +0000 (05:48 +0000)]
fdt: ARM: Add device tree control of U-Boot (CONFIG_OF_CONTROL)
This adds a device tree pointer to the global data. It can be set by
board code. A later commit will add support for making a device
tree binary blob available to U-Boot for run-time configuration.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 18:00:08 +0000 (18:00 +0000)]
net: tftpput: add tftpput command
This adds the tftpput command to U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 18:00:07 +0000 (18:00 +0000)]
net: tftpput: implement tftp logic
This adds logic to tftp.c to implement the tftp 'put' command, and
updates the README.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 21 Oct 2011 18:51:38 +0000 (18:51 +0000)]
tftpput: add save_addr and save_size global variables
We need something akin to load_addr to handle saving data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 18:00:05 +0000 (18:00 +0000)]
net: tftpput: Support selecting get/put for tftp
TftpStart should support starting either a get or a put.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 18:00:04 +0000 (18:00 +0000)]
net: tftpput: Factor out start, restart and next block functions
This code is required for tftpput, so move it into separate functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 18:00:03 +0000 (18:00 +0000)]
net: tftpput: move common code into separate functions
We want to show block markers on completion of get and put, so
move this common code into separate functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 18:00:02 +0000 (18:00 +0000)]
net: tftpput: Rename TFTP to TFTPGET
This is a better name for this protocol. Also remove the typedef to keep
checkpatch happy, and move zeroing of NetBootFileXferSize a little
earlier since TFTPPUT will need to change this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 18:00:01 +0000 (18:00 +0000)]
net: tftpput: Add support for receiving ICMP packets
ICMP packets can tell you when there is no server at the other end. It
is useful for tftp to figure this out, so that a quick error can be
displayed, rather than pointlessly retrying.
This adds an ICMP packet handler to the net interface.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 18:00:00 +0000 (18:00 +0000)]
net: tftpput: Move ICMP code into its own function
NetReceive() is a very long function with a lot of indent. Before adding
code to the ICMP bit, split it out.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 24 Oct 2011 17:59:59 +0000 (17:59 +0000)]
Add setenv_ulong() and setenv_addr()
It seems we put numbers and addresses into environment variables a lot.
We should have some functions to do this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 21 Oct 2011 18:51:33 +0000 (18:51 +0000)]
Move simple_itoa to vsprintf
This function is generally useful and shouldn't hide away in hush. It
has been moved as is.
Signed-off-by: Simon Glass <sjg@chromium.org>
Joachim Foerster [Mon, 17 Oct 2011 05:24:46 +0000 (05:24 +0000)]
altera_tse: Fix return of eth_device's recv() callback
It seems to be good practice to return the number of received bytes in the
eth_device's recv() callback, here: tse_eth_rx().
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Joachim Foerster [Tue, 25 Oct 2011 22:39:57 +0000 (22:39 +0000)]
altera_tse: m88e1111s: Honor device flags regarding PHY interface mode
Note: This is kind of guess work. The current code is preserved for
all RGMII related modes. It is different for flags=0 (GMII) and flags=5
(SGMII). The last case, SGMII, is successfully tested on
Altera's Terasic DE4.
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Joachim Foerster [Mon, 17 Oct 2011 05:24:44 +0000 (05:24 +0000)]
altera_tse: Add support for dedicated descriptor memory
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Joachim Foerster [Mon, 17 Oct 2011 05:24:43 +0000 (05:24 +0000)]
altera_tse: Fix SGDMA reset triggering
The SW_RESET needs to be set instead of being masked out!
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Joachim Foerster [Tue, 25 Oct 2011 22:39:54 +0000 (22:39 +0000)]
altera_tse: Clear SGDMA's RUN bit in async transfer, like in sync case
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Anton staaf [Wed, 12 Oct 2011 13:56:04 +0000 (13:56 +0000)]
part_efi: dcache: allocate cacheline aligned buffers
Currently part_efi.c allocates buffers for the gpt_header, the
legacy_mbr, and the pte (partition table entry) that may be
incorrectly aligned for DMA operations.
This patch uses ALLOC_CACHE_ALIGN_BUFFER for the stack allocated
buffers and memalign to replace the malloc of the pte.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Anton staaf [Tue, 4 Oct 2011 11:24:50 +0000 (11:24 +0000)]
mmc: dcache: allocate cache aligned buffers for ext_csd
Currently the mmc_change_freq and mmc_startup functions allocates
buffers on the stack that are passed down to the MMC device driver.
These buffers could be unaligned to the L1 dcache line size. This
causes problems when using DMA and with caches enabled.
This patch correctly cache alignes the buffers used for reading the
ext_csd data from an MMC device.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Anton staaf [Mon, 3 Oct 2011 13:55:00 +0000 (13:55 +0000)]
ext2: Cache line aligned partial sector bounce buffer
Currently, if a device read request is done that does not begin or end
on a sector boundary a stack allocated bounce buffer is used to perform
the read, and then just the part of the sector that is needed is copied
into the users buffer. This stack allocation can mean that the bounce
buffer will not be aligned to the dcache line size. This is a problem
when caches are enabled because unaligned cache invalidates are not
safe.
This patch uses ALLOC_CACHE_ALIGN_BUFFER to create a stack allocated
cache line size aligned bounce buffer.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Dave Liu <r63238@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Change-Id: I32e1594d90ef039137bb219b0f7ced55768744ff
Acked-by: Mike Frysinger <vapier@gentoo.org>
Anton staaf [Mon, 3 Oct 2011 13:54:59 +0000 (13:54 +0000)]
mmc: dcache: allocate cache aligned buffer for scr and switch_status
Currently the sd_change_freq function allocates two buffers on the
stack that it passes down to the MMC device driver. These buffers
could be unaligned to the L1 dcache line size. This causes problems
when using DMA and with caches enabled.
This patch correctly cache alignes the buffers used for reading the
scr register and switch status values from an MMC device.
Change-Id: Ifa8414f572ef907681bd2d5ff3950285a215357d
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Anton staaf [Mon, 3 Oct 2011 13:54:58 +0000 (13:54 +0000)]
tegra: define CONFIG_SYS_CACHELINE_SIZE for tegra
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Tom Warren <twarren.nvidia@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Change-Id: I5c4bcfc0bfe59158ff249fe3be6640eec6d3cc76
Acked-by: Mike Frysinger <vapier@gentoo.org>
Anton staaf [Wed, 12 Oct 2011 13:55:59 +0000 (13:55 +0000)]
cache: add ALLOC_CACHE_ALIGN_BUFFER macro
This macro is used to allocate cache line size aligned stack
buffers for use with DMA hardware.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Aneesh V <aneesh@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 24 Oct 2011 19:14:42 +0000 (21:14 +0200)]
Revert "km_arm: enable POST for these boards"
This reverts commit
a2da616311151ecfab8b8fcc510686fc3c0c9a21.
THis was applied by accident - a more recent version of this change
was already present, see commit
9400f8f 2011-10-05 22:03:11 +0200 km_arm: enable POST for these boards
Signed-off-by: Wolfgang Denk <wd@denx.de>
Simon Glass [Sun, 23 Oct 2011 17:44:35 +0000 (17:44 +0000)]
arm: Correct build error introduced by getenv_ulong() patch
Commit dc8bbea removed a local variable that is used in most ARM boards.
Since we want to avoid an 'unused variable' warning with later compilers,
and the #ifdef logic of whether this variable is required is bit painful,
this declares the variable local to the block of code that needs it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 23 Oct 2011 17:41:54 +0000 (17:41 +0000)]
powerpc: Correct build warning introduced by getenv_ulong() patch
Commit 1272592 introduced a warning since the variable 's' is no longer
always used, depending on the CONFIG options.
Signed-off-by: Simon Glass <sjg@chromium.org>
Stefano Babic [Mon, 17 Oct 2011 00:07:43 +0000 (00:07 +0000)]
mkimage: adding support for Davinci AIS image
Some Davinci processors supports the Application
Image Script (AIS) boot process. The patch adds the generation
of the AIS image inside the mkimage tool to make possible
to generate a bootable U-boot without external tools
(TI Davinci AIS Generator).
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Mike Frysinger [Sun, 16 Oct 2011 20:04:13 +0000 (16:04 -0400)]
net: xilinx_enet: drop unused !NET_MULTI driver
This driver doesn't support the NET_MULTI framework, and I can't find
any boards/configs/files that reference this subdir, so punt it all.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 16 Oct 2011 10:04:12 +0000 (10:04 +0000)]
net: sc589: drop unused !NET_MULTI driver
No boards appear to use this driver, and it doesn't support NET_MULTI,
so punt the old driver.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 16 Oct 2011 10:04:11 +0000 (10:04 +0000)]
net: s3c4510b_eth: drop unused !NET_MULTI driver
No boards appear to use this driver, and it doesn't support NET_MULTI,
so punt the old driver.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 16 Oct 2011 10:04:10 +0000 (10:04 +0000)]
net: ns9750: drop !NET_MULTI driver
Only one board uses this driver (ns9750dev), but the board doesn't seem
to have an entry to actually build it in the Makefile/boards.cfg, so just
delete net support from its board config.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 16 Oct 2011 20:04:09 +0000 (16:04 -0400)]
net: enc28j60_lpc2292: drop unused !NET_MULTI driver
Everyone seems to have converted to the new enc28j60 driver, so drop
this older one which isn't used and doesn't support NET_MULTI.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Bernhard Kaindl [Sun, 16 Oct 2011 00:07:08 +0000 (00:07 +0000)]
powerpc/lib/board.c: Call run_post(POST_ROM) before relocating
The call to run_post(POST_ROM) which can run the POST memory test
is currently called too late when gd has already been copied to DRAM.
This results in failure to boot Linux after a POST_ROM memory test
tested all RAM while gd was already relocated to DRAM due to gd being
overwritten by the POST_ROM memory test.
Support this by moving the call to run_post(POST_ROM) to run earlier,
before U-Boot has started to move data to DRAM (from late board_init_f
to early board_init_f) where DRAM is initialized, but not used yet.
This allows that an POST memory test can test the whole DRAM,
including the area where the board info struct is located.
Signed-off-by: Bernhard Kaindl <bernhard.kaindl@thalesgroup.com>
Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
Bernhard Kaindl [Sat, 15 Oct 2011 23:59:22 +0000 (23:59 +0000)]
net/dns.c: Fix endian conversion for big-endian in dns command
net/dns.c used endian conversion macros wrongly (shorts in reply
were put swapped into CPU, and then ntohs() was used to swap it
back, which broke on big-endian).
Fix this by using the correct linux conversion macro for reading
a unaligned short in network byte order: get_unaligned_be16()
Thanks to Mike Frysinger pointing at the best macro to use.
Tested on big and little endian qemu boards (mips and versatile)
Signed-off-by: Bernhard Kaindl <bernhard.kaindl@thalesgroup.com>
Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Simon Glass [Thu, 13 Oct 2011 14:43:14 +0000 (14:43 +0000)]
x86: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Oct 2011 14:43:13 +0000 (14:43 +0000)]
sparc: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Oct 2011 14:43:12 +0000 (14:43 +0000)]
powerpc: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Roese <sr@denx.de>
Simon Glass [Thu, 13 Oct 2011 14:43:11 +0000 (14:43 +0000)]
mips: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Oct 2011 14:43:10 +0000 (14:43 +0000)]
microblaze: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Oct 2011 14:43:09 +0000 (14:43 +0000)]
m68k: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Oct 2011 14:43:08 +0000 (14:43 +0000)]
blackfin: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Simon Glass [Thu, 13 Oct 2011 14:43:07 +0000 (14:43 +0000)]
avr32: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Oct 2011 14:43:06 +0000 (14:43 +0000)]
arm: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 14 Oct 2011 13:25:18 +0000 (13:25 +0000)]
Add getenv_ulong() to read an integer from an environment variable
This is not an uncommon operation in U-Boot, so let's put it in a common
function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Daniel Schwierzeck [Tue, 18 Oct 2011 11:12:22 +0000 (11:12 +0000)]
common: fix missing function pointer relocation in fixup_cmdtable()
In commit
fa28bd2eef588ec2048ccafedb2b384d5a355858 patch v1 was applied
instead of v2. This is an incremental patch to update that commit
to version 2.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Michal Simek [Wed, 12 Oct 2011 23:23:22 +0000 (23:23 +0000)]
net: emaclite: Move RX/TX ping pong initialization to
Init RX/TX ping pong directly from board not in the driver.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Wed, 12 Oct 2011 23:23:21 +0000 (23:23 +0000)]
net: emaclite: Use unsigned long for baseaddr
Baseaddr should be unsigned long.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Heiko Schocher [Thu, 6 Oct 2011 20:40:00 +0000 (20:40 +0000)]
arm, post, memory: fix bug if sdram base != 0x00000000
commit
8d3fcb5e60b6c8e1d530dbc2e2e33ec6a44670da breaks post
memory support for sdram base != 0x00000000. Fix this.
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Valentin Longchamp <valentin.longchamp@keymile.com>
Cc: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Shaohui Xie [Tue, 27 Sep 2011 01:21:34 +0000 (01:21 +0000)]
spi/eon: add support for new EON spi flash EN25Q32B
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Anton Staaf [Mon, 17 Oct 2011 23:46:13 +0000 (16:46 -0700)]
cache: include asm/cache.h for ARCH_DMA_MINALIGN definition
ARCH_DMA_MINALIGN will be used to allocate DMA buffers that are
aligned correctly. In all current cases this means that the DMA
buffer will be aligned to at least the L1 data cache line size of
the configured architecture. If the board configuration file
does not specify the architecture L1 data cache line size then the
maximum line size of the architecture is used to align DMA buffers.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ilya Yanok <yanok@emcraft.com>
Cc: Laurence Withers <lwithers@guralp.com>
Anton Staaf [Mon, 17 Oct 2011 23:46:12 +0000 (16:46 -0700)]
x86: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Graeme Russ <graeme.russ@gmail.com>
Anton Staaf [Mon, 17 Oct 2011 23:46:11 +0000 (16:46 -0700)]
mips: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Shinya Kuribayashi <skuribay@pobox.com>
Anton Staaf [Mon, 17 Oct 2011 23:46:10 +0000 (16:46 -0700)]
microblaze: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Michal Simek <monstr@monstr.eu>
Anton Staaf [Mon, 17 Oct 2011 23:46:09 +0000 (16:46 -0700)]
avr32: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Reinhard Meyer <u-boot@emk-elektronik.de>
Anton Staaf [Mon, 17 Oct 2011 23:46:08 +0000 (16:46 -0700)]
sparc: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Anton Staaf [Mon, 17 Oct 2011 23:46:07 +0000 (16:46 -0700)]
sh: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Anton Staaf [Mon, 17 Oct 2011 23:46:06 +0000 (16:46 -0700)]
powerpc: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Acked-by: Stefan Roese <sr@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Anton Staaf [Mon, 17 Oct 2011 23:46:05 +0000 (16:46 -0700)]
nios2: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Scott McNutt <smcnutt@psyent.com>
Anton Staaf [Mon, 17 Oct 2011 23:46:04 +0000 (16:46 -0700)]
m68k: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Jason Jin <jason.jin@freescale.com>
Anton Staaf [Mon, 17 Oct 2011 23:46:03 +0000 (16:46 -0700)]
arm: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Simon Glass [Sat, 15 Oct 2011 19:14:09 +0000 (19:14 +0000)]
NS16550: trivial code clean for checkpatch
This removes most checkpatch warnings from the ns16550 driver and its
header.
Signed-off-by: Simon Glass <sjg@chromium.org>
Wolfgang Denk [Sun, 23 Oct 2011 15:00:47 +0000 (17:00 +0200)]
MPC85xx: remove broken "mpq101" board
The board stopped building some time ago, and the board maintainer
agrtees to drop it - see
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/112674
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Michal Simek [Tue, 18 Oct 2011 00:22:10 +0000 (00:22 +0000)]
serial: uartlite: Fix compilation warnings
Do not setup userial_ports array as const because
in uartlite_serial_putc is out_be32 which can't write
to tx_fifo if is const.
Warning log:
serial_xuartlite.c: In function 'uartlite_serial_putc':
serial_xuartlite.c:60: warning: initialization discards qualifiers from pointer target type
serial_xuartlite.c: In function 'uartlite_serial_getc':
serial_xuartlite.c:78: warning: initialization discards qualifiers from pointer target type
serial_xuartlite.c: In function 'uartlite_serial_tstc':
serial_xuartlite.c:87: warning: initialization discards qualifiers from pointer target type
Signed-off-by: Michal Simek <monstr@monstr.eu>
Dirk Eibach [Thu, 13 Oct 2011 23:23:12 +0000 (23:23 +0000)]
hwmon: Provide dtt_init()
Our boards rely on dtt for initialization of fan hardware.
dtt_init() was implemented to be called form board specific code.
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Joe Hershberger [Thu, 13 Oct 2011 13:03:48 +0000 (13:03 +0000)]
common: cosmetic: CONFIG_BOOTFILE checkpatch compliance
Remove MK_STR from places that consume CONFIG_BOOTFILE to force all definitions to be string literals.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Joe Hershberger [Thu, 13 Oct 2011 13:03:47 +0000 (13:03 +0000)]
common: cosmetic: CONFIG_ROOTPATH checkpatch compliance
Remove MK_STR from places that consume CONFIG_ROOTPATH to force all definitions to be string literals.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 12 Oct 2011 19:48:00 +0000 (19:48 +0000)]
autoconf.mk.dep: use target cflags, not host
The current autoconf.mk.dep rule uses the host cflags when executing the
target compiler (which includes target header files). We don't want to
mix the target compiler and host compiler flags, so change it to CFLAGS.
Otherwise we get things like -pedantic which the U-Boot source code does
not build with.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 12 Oct 2011 19:25:20 +0000 (19:25 +0000)]
build: force migration away from $(AR)
People keep adding new code that still uses $(AR) instead of
$(cmd_link_o_target), so turn it into a build time error.
We still use $(AR) locally, but we don't use $(ARFLAGS).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 18 Oct 2011 05:30:17 +0000 (05:30 +0000)]
build: add missing $(AR)->$(cmd_link_o_target) update
Seems people fixed their files to use libfoo.o, but didn't actually
update the creation targets to use $(cmd_link_o_target). Update the
rest of the Makefile's found with grep.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Simon Glass <sjg@chromium.org>