swsusp: clean up printk

Remove an inexplicable /

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix leaky resv_huge_pages when cpuset is in use

The internal hugetlb resv_huge_pages variable can permanently leak nonzero
value in the error path of hugetlb page fault handler when hugetlb page is
used in combination of cpuset.  The leaked count can permanently trap N
number of hugetlb pages in unusable "reserved" state.

Steps to reproduce the bug:

  (1) create two cpuset, user1 and user2
  (2) reserve 50 htlb pages in cpuset user1
  (3) attempt to shmget/shmat 50 htlb page inside cpuset user2
  (4) kernel oom the user process in step 3
  (5) ipcrm the shm segment

At this point resv_huge_pages will have a count of 49, even though
there are no active hugetlbfs file nor hugetlb shared memory segment
in the system.  The leak is permanent and there is no recovery method
other than system reboot. The leaked count will hold up all future use
of that many htlb pages in all cpusets.

The culprit is that the error path of alloc_huge_page() did not
properly undo the change it made to resv_huge_page, causing
inconsistent state.

Signed-off-by: Ken Chen <kenchen@google.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Martin Bligh <mbligh@google.com>
Acked-by: David Gibson <dwg@au1.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm log: fix resume failed log device

This patch removes the possibility of having uninitialized log state if the
log device has failed.

When a mirror resumes operation, it calls 'resume' on the logging module.  If
disk based logging is being used, the log device is read to fill in the log
state.  If the log device has failed, we cannot simply return, because this
would leave the in-memory log state uninitialized.  Instead, we assume all
regions are out-of-sync and reset the log state.  Failure to do this could
result in the logging code reporting a region as in-sync, even though it
isn't; which could result in a corrupted mirror.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm raid1: switch rh_in_sync to blocking in do_reads

The call to rh_in_sync() in do_reads() should be allowed to block.  It is in
the mirror worker thread which already permits blocking operations.  This will
be needed to support clustered mirroring which will perform network
operations.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm raid1: fix to commit pending clear region requests

With the code as it is, it is possible for oustanding clear region requests
never to get flushed when a mirror is deactivated or suspended.  This means
there will always be some resync work required when a mirror is activated,
even though it may very well be in-sync.

Always requesting the flush doesn't hurt us.  This is because the log tracks
whether any changes occurred and, if not, no flush is performed.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm: delay target

New device-mapper target that can delay I/O (for testing).  Reads can be
separated from writes, redirected to different underlying devices and delayed
by differing amounts of time.

Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com>
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm: bio list helpers

More bio_list helper functions for new targets (including dm-delay and
dm-loop) to manipulate lists of bios.

Signed-off-by: Heinz Mauelshagen <hjm@redhat.com>
Signed-off-by: Bryn Reeves <breeves@redhat.com>
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm io: remove old interface

Remove old dm-io interface.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm raid1: update dm io interface

This patch ports dm-raid1.c to the new dm-io interface.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm log: update dm io interface

This patch ports dm-log.c to the new dm-io interface in order to make it
scalable to have a large number of persistent dirty logs active in parallel.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Cc: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm exception store: update dm io interface

This patch ports dm-exception-store.c to the new, scalable dm_io() interface.

It replaces dm_io_get()/dm_io_put() by
dm_io_client_create()/dm_io_client_destroy() calls and
dm_io_sync_vm() by dm_io() to achive this.

Signed-off-by: Heinz Mauelshagen <hjm@redhat.com>
Cc: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm kcopyd: update dm io interface

This patch ports kcopyd.c to the new, scalable dm_io() interface.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Heinz Mauelshagen <hjm@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm io: new interface

Add a new API to dm-io.c that uses a private mempool and bio_set for each
client.

The new functions to use are dm_io_client_create(), dm_io_client_destroy(),
dm_io_client_resize() and dm_io().

Signed-off-by: Heinz Mauelshagen <hjm@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Milan Broz <mbroz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm io: prepare for new interface

Introduce struct dm_io_client to prepare for per-client mempools and bio_sets.

Temporary functions bios() and io_pool() choose between the per-client
structures and the global ones so the old and new interfaces can co-exist.

Make error_bits optional.

Signed-off-by: Heinz Mauelshagen <hjm@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Milan Broz <mbroz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm io: delay dec_count

Delay decrementing the 'struct io' reference count until after the bio has
been freed so that a bio destructor function may reference it.  Required by a
later patch.

Signed-off-by: Heinz Mauelshagen <hjm@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Milan Broz <mbroz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm raid1: add handle_errors feature flag

This patch adds the ability to specify desired features in the mirror
constructor/mapping table.

The first feature of interest is "handle_errors".  Currently, mirroring will
ignore any I/O errors from the devices.  Subsequent patches will check for
this flag and handle the errors.  If flag/feature is not present, mirror will
do nothing - maintaining backwards compatibility.

Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm log: report fault status

This patch reports the status of the log device so that userspace can detect
the error and take appropriate action.

Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm log: fault detection

This patch gives the disk logging code the ability to store the fact that an
error occured on the log device.  In addition, an event is raised when an
error is encountered during I/O to the log device.

Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm: allow offline devices

Allow check_device_area to succeed if a device has an i_size of zero.  This
addresses an issue seen on DASD devices setting up a multipath table for paths
in online and offline state.

Signed-off-by: Mike Anderson <andmike@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm mpath: log device name

Make the mapped device structure accessible to hardware handlers so error
messages can include the device name.

Signed-off-by: Edward Goggin <egoggin@emc.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm crypt: add null iv

Add a new IV generation method 'null' to read old filesystem images created
with SuSE's loop_fish2 module.

Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de>
Acked-By: Christophe Saout <christophe@saout.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm crypt: use smaller bvecs in clones

Allocate smaller clones

With the previous dm-crypt fixes, there is no need for the clone bios to have
the same bvec size as the original - we just need to make them big enough for
the remaining number of pages.  The only requirement is that we clear the
"out" index in convert_context, so that crypt_convert starts storing data at
the right position within the clone bio.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm crypt: fix remove first_clone

Get rid of first_clone in dm-crypt

This gets rid of first_clone, which is not really needed.  Apparently, cloned
bios used to share their bvec some time way in the past - this is no longer
the case.  Contrarily, this even hurts us if we try to create a clone off
first_clone after it has completed, and crypt_endio has destroyed its bvec.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm crypt: fix avoid cloned bio ref after free

Do not access the bio after generic_make_request

We should never access a bio after generic_make_request - there's no guarantee
it still exists.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm crypt: fix call to clone_init

Call clone_init early

We need to call clone_init as early as possible - at least before call
bio_put(clone) in any error path.  Otherwise, the destructor will try to
dereference bi_private, which may still be NULL.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm crypt: disable barriers

Disable barriers in dm-crypt because of current workqueue processing can
reorder requests.

This must be addresed later but for now disabling barriers is needed to
prevent data corruption.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm raid1: one kmirrord per mirror

This patch replaces the single instance of kmirrord by one instance per mirror
set.  This change is required to avoid a deadlock in kmirrord when the
persistent dirty log of a mirror itself resides on a mirror.  The single
instance of kmirrord then issues a sync write to the dirty log in write_bits
which gets deferred to kmirrord itself later in the call chain.  But kmirrord
never does the deferred work because it is still waiting for the sync
write_bits.

_mirror_sets is removed as it no longer needed, and we always flush the
workqueue before destroying it to ensure all work is complete before
destroying it.

Signed-off-by: Holger Smolinski <smolinski@de.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

FRV: Replace pgd management via slabs through quicklists

This is done in order to be able to run SLUB which expects no modifications
to its page structs.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix spellings of slab allocator section in init/Kconfig

Fix some of the spelling issues. Fix sentences. Discourage SLOB use
since SLUB can pack objects denser.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

krealloc: fix kerneldoc comments

No "blank" (or "*") line is allowed between the function name and lines for
it parameter(s).

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: rework slab order determination

In some cases SLUB is creating uselessly slabs that are larger than
slub_max_order. Also the layout of some of the slabs was not satisfactory.

Go to an iterarive approach.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: include lifetime stats and sets of cpus / nodes in tracking output

We have information about how long an object existed and about the nodes and
cpus where the allocations and frees took place.  Add that information to the
tracking output in /sys/slab/xx/alloc_calls and /sys/slab/free_calls

This will then enable slabinfo to output nice reports like this:

  christoph@qirst:~/slub$ ./slabinfo kmalloc-128

  Slabcache: kmalloc-128           Aliases:  0 Order :  0

  Sizes (bytes)     Slabs              Debug                Memory
  ------------------------------------------------------------------------
  Object :     128  Total  :      12   Sanity Checks : On   Total:   49152
  SlabObj:     200  Full   :       7   Redzoning     : On   Used :   24832
  SlabSiz:    4096  Partial:       4   Poisoning     : On   Loss :   24320
  Loss   :      72  CpuSlab:       1   Tracking      : On   Lalig:   13968
  Align  :       8  Objects:      20   Tracing       : Off  Lpadd:    1152

  kmalloc-128 has no kmem_cache operations

  kmalloc-128: Kernel object allocation
  -----------------------------------------------------------------------
        6 param_sysfs_setup+0x71/0x130 age=284512/284512/284512 pid=1 nodes=0-1,3
       11 percpu_populate+0x39/0x80 age=283914/284428/284512 pid=1 nodes=0
       21 __register_chrdev_region+0x31/0x170 age=282896/284347/284473 pid=1-1705 nodes=0-2
        1 sys_inotify_init+0x76/0x1c0 age=283423 pid=1004 nodes=0
       19 as_get_io_context+0x32/0xd0 age=6/247567/283988 pid=1-11782 nodes=0,2
       10 ida_pre_get+0x4a/0x80 age=277666/283773/284526 pid=0-2177 nodes=0,2
       24 kobject_kset_add_dir+0x37/0xb0 age=282727/283860/284472 pid=1-1723 nodes=0-2
        1 acpi_ds_build_internal_buffer_obj+0xd3/0x11d age=284508 pid=1 nodes=0
       24 con_insert_unipair+0xd7/0x110 age=284438/284438/284438 pid=1 nodes=0,2
        1 uart_open+0x2d2/0x4b0 age=283896 pid=1 nodes=0
       26 dma_pool_create+0x73/0x1a0 age=282762/282833/282916 pid=1705-1723 nodes=0
        1 neigh_table_init_no_netlink+0xd2/0x210 age=284461 pid=1 nodes=0
        2 neigh_parms_alloc+0x2b/0xe0 age=284410/284411/284412 pid=1 nodes=2
        2 neigh_resolve_output+0x1e1/0x280 age=276289/276291/276293 pid=0-2443 nodes=0
        1 netlink_kernel_create+0x90/0x170 age=284472 pid=1 nodes=0
        4 xt_alloc_table_info+0x39/0xf0 age=283958/283958/283959 pid=1 nodes=1
        3 fn_hash_insert+0x473/0x720 age=277653/277661/277666 pid=2177-2185 nodes=0
        1 get_mtrr_state+0x285/0x2a0 age=284526 pid=0 nodes=0
        1 cacheinfo_cpu_callback+0x26d/0x3e0 age=284458 pid=1 nodes=0
       29 kernel_param_sysfs_setup+0x25/0x90 age=284511/284511/284512 pid=1 nodes=0-1,3
        5 process_zones+0x5e/0x170 age=284546/284546/284546 pid=0 nodes=0
        1 drm_core_init+0x48/0x160 age=284421 pid=1 nodes=2

  kmalloc-128: Kernel object freeing
  ------------------------------------------------------------------------
      163 <not-available> age=4295176847 pid=0 nodes=0-3
        1 __vunmap+0x6e/0xf0 age=282907 pid=1723 nodes=0
       28 free_as_io_context+0x12/0x90 age=9243/262197/283474 pid=42-11754 nodes=0
        1 acpi_get_object_info+0x1b7/0x1d4 age=284475 pid=1 nodes=0
        1 do_acpi_find_child+0x45/0x4e age=284475 pid=1 nodes=0

  NUMA nodes           :    0    1    2    3
  ------------------------------------------
  All slabs                 7    2    2    1
  Partial slabs             2    2    0    0

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: add CONFIG_SLUB_DEBUG

CONFIG_SLUB_DEBUG can be used to switch off the debugging and sysfs components
of SLUB.  Thus SLUB will be able to replace SLOB.  SLUB can arrange objects in
a denser way than SLOB and the code size should be minimal without debugging
and sysfs support.

Note that CONFIG_SLUB_DEBUG is materially different from CONFIG_SLAB_DEBUG.
CONFIG_SLAB_DEBUG is used to enable slab debugging in SLAB.  SLUB enables
debugging via a boot parameter.  SLUB debug code should always be present.

CONFIG_SLUB_DEBUG can be modified in the embedded config section.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: move tracking definitions and check_valid_pointer() away from debug code

Move the tracking definitions and the check_valid_pointer() function away from
the debugging related functions.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: consolidate trace code

Trace in both slab_alloc and slab_free has a lot of common code.  Use a single
function for both.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: introduce DebugSlab(page)

This replaces the PageError() checking.  DebugSlab is clearer and allows for
future changes to the page bit used.  We also need it to support
CONFIG_SLUB_DEBUG.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: move resiliency check into SYSFS section

Move the resiliency check into the SYSFS section after validate_slab that is
used by the resiliency check.  This will avoid a forward declaration.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: add macros for scanning objects in a slab

Scanning of objects happens in a number of functions.  Consolidate that code.
DECLARE_BITMAP instead of coding the declaration for bitmaps.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: update comments

Update comments throughout SLUB to reflect the new developments.  Fix up
various awkward sentences.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: get rid of finish_bootstrap

Its only purpose was to bring some sort of symmetry to sysfs usage when
dealing with bootstrapping per cpu flushing.  Since we do not time out slabs
anymore we have no need to run finish_bootstrap even without sysfs.  Fold it
back into slab_sysfs_init and drop the initcall for the !SYFS case.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: clean up krealloc

We really do not need all this gaga there.

ksize gives us all the information we need to figure out if the object can
cope with the new size.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: use check_valid_pointer in kmem_ptr_validate

We needlessly duplicate code. Also make check_valid_pointer inline.

Signed-off-by: Christoph LAemter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: slabinfo upgrade

-e Show empty slabs
-d Modification of slab debug options at runtime
-o Operations. Display of ctor / dtor etc.
-r Report: Display all available information about a slabcache.

Cleanup tracking display and make it work right.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: after object padding only needed for Redzoning

If no redzoning is selected then we do not need padding before the next
object.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: add support for dynamic cacheline size determination

SLUB currently assumes that the cacheline size is static.  However, i386 f.e.
supports dynamic cache line size determination.

Use cache_line_size() instead of L1_CACHE_BYTES in the allocator.

That also explains the purpose of SLAB_HWCACHE_ALIGN.  So we will need to keep
that one around to allow dynamic aligning of objects depending on boot
determination of the cache line size.

[akpm@linux-foundation.org: need to define it before we use it]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Declare {compat_}sys_utimensat

This is needed before Powerpc can wire up the syscall.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmc build fix

Cc: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/i386/boot.txt: update and correct

In the process of rewriting the x86 setup code, I found a number of
inaccuracies and outdated recommendations in the boot protocol
documentation.  Revamp to make it more up to date.

In particular, the common use of the heap actually requires (slightly)
more than 4K of heap plus stack, which is the recommended amount in
the document; currently the code compensates by being smaller than
specified, but we can't assume that will be true forever.  Thus,
recommend that if we have a modern bzImage kernel, that the bootloader
maximizes the available space.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert 'sched: redundant reschedule when set_user_nice() boosts a prio of a task from the "expired" array'

Revert commit bd53f96ca54a21c07e7a0ae1886fa623d370b85f.

Con says:

This is no good, sorry. The one I saw originally was with the staircase
deadline cpu scheduler in situ and was different.

  #define TASK_PREEMPTS_CURR(p, rq) \
     ((p)->prio < (rq)->curr->prio)
     (((p)->prio < (rq)->curr->prio) && ((p)->array == (rq)->active))

This will fail to wake up a runqueue for a task that has been migrated to the
expired array of a runqueue which is otherwise idle which can happen with smp
balancing,

Cc: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: Con Kolivas <kernel@kolivas.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

applesmc: Use standard sysfs names for labels

We have a standard suffix to associate a designation string to a sensor:
_label.  Use it instead of _position so that libsensors will catch it.
(This isn't implemented yet, but should be soon.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

applesmc: Use the address as platform device ID

Let the applesmc device export its address to userspace.  libsensors needs
this to recognize the device and give it a unique ID.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

usb_gigaset: don't kmalloc(0)

Zero-sized allocations are pointless anyway, and the SLUB allocator
complains about them, so stop doing that.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Hansjoerg Lipp <hjlipp@web.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: <asm/scatterlist.h> needs <linux/types.h>

The recent <linux/pci.h> cleanup uncovered that include/asm-m68k/scatterlist.h
needs to include <linux/types.h>

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

FRV: Miscellaneous fixes

Miscellaneous fixes to bring FRV up to date:

 (1) Copy the new syscall numbers from i386 to asm-frv/unistd.h and fill out
     the syscall table in entry.S too.

 (2) Mark __frv_uart0 and __frv_uart1 __pminitdata rather than __initdata so
     that determine_clocks() can access them when CONFIG_PM=y.

 (3) Make arch/frv/mm/elf-fdpic.c include asm/mman.h so that MAP_FIXED is
     available (fixes commit 2fd3bebaad9da3b3b99c46a3389099424bf7ee35).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

smaps: only define clear_refs for CONFIG_MMU

/proc/pid/clear_refs is only defined in the CONFIG_MMU case, so make sure we
don't have any references to clear_refs_smap() in generic procfs code.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix unnecesary meminit

This is to fix unnecessary __meminit definition.  These are exported for
kernel modules.

I compiled on ia64/x86-64 with memory hotplug on/off.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/herbert/crypto-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] cryptomgr: Fix use after free

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Optimize fault kprobe handling just like powerpc.
  [SPARC]: Wire up utimensat syscall.
  [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.
  [SPARC64]: Kill asm-sparc64/pbm.h
  [ATYFB]: Fix sparc includes.
  [QLA2XXX]: Fix build on sparc.
  [SPARC64]: Removal of trivial pci_controller_info uses.
  [SPARC64]: Move index info pci_pbm_info.
  [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.
  [SPARC64]: Move pci_ops into pci_pbm_info.
  [SPARC64] SBUS: Error interrupt registry cleanups.
  [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's
  [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.
  [SPARC64] PCI: Use common routine to fetch PBM properties.

Merge /pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits)
  [SCSI] zfcp: clear boxed flag on unit reopen.
  [SCSI] zfcp: clear adapter failed flag if an fsf request times out.
  [SCSI] zfcp: rework request ID management.
  [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI
  [SCSI] zfcp: Locking for req_no and req_seq_no
  [SCSI] zfcp: print S_ID and D_ID with 3 bytes
  [SCSI] ipr: Use PCI-E reset API for new ipr adapter
  [SCSI] qla2xxx: Update version number to 8.01.07-k7.
  [SCSI] qla2xxx: Add MSI support.
  [SCSI] qla2xxx: Correct pci_set_msi() usage semantics.
  [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed.
  [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.
  [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization.
  [SCSI] zfcp: Stop system after memory corruption
  [SCSI] mesh: cleanup variable usage in interrupt handler
  [SCSI] megaraid: replace yield() with cond_resched()
  [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n
  [SCSI] aacraid: correct SUN products to README
  [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers
  [SCSI] aacraid: kexec fix (reset interrupt handler)
  ...

Revert "fbdev: ignore VESA modes if framebuffer is disabled"

This reverts commit 464bdd33e9baad9806c7adbd8dfc37081a55f27e.

Peter Anvin correctly points out that VESA modes have nothing to do with
frame buffers per se - they are often just regular extended text modes.
Disabling them just because we don't have frame buffer support is very
wrong.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove suid/sgid bits on [f]truncate()

.. to match what we do on write().  This way, people who write to files
by using [f]truncate + writable mmap have the same semantics as if they
were using the write() family of system calls.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[CRYPTO] cryptomgr: Fix use after free

By the time kthread_run returns the param may have already been freed
so writing the returned thread_struct pointer to param is wrong.

In fact, we don't need it in param anyway so this patch simply puts it
on the stack.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

[SPARC64]: Optimize fault kprobe handling just like powerpc.

And eliminate DIE_GPF while we're at it.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC]: Wire up utimensat syscall.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Kill asm-sparc64/pbm.h

Everything it contains can be hidden in pci_impl.h

Signed-off-by: David S. Miller <davem@davemloft.net>

[ATYFB]: Fix sparc includes.

No need to use asm/pbm.h here.

Signed-off-by: David S. Miller <davem@davemloft.net>

[QLA2XXX]: Fix build on sparc.

We now use pci_device_to_OF_node() to get properties
and of_get_property() returns const pointers.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Removal of trivial pci_controller_info uses.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Move index info pci_pbm_info.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Move pci_ops into pci_pbm_info.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] SBUS: Error interrupt registry cleanups.

Do not use IRQF_SHARED, these interrupt numbers should all
be unique.

Also use name strings without spaces in them just like
PCI controller drivers do, for consistency.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's

The idea is to move more and more things into the pbm,
with the eventual goal of eliminating the pci_controller_info
entirely as there really isn't any need for it.

This stage of the transformations requires some reworking of
the PCI error interrupt handling.

It might be tricky to get rid of the pci_controller_info parenting for
a few reasons:

1) When we get an uncorrectable or correctable error we want
   to interrogate the IOMMU and streaming cache of both
   PBMs for error status.  These errors come from the UPA
   front-end which is shared between the two PBM PCI bus
   segments.

   Historically speaking this is why I choose the datastructure
   hierarchy of pci_controller_info-->pci_pbm_info

2) The probing does a portid/devhandle match to look for the
   'other' pbm, but this is entirely an artifact and can be
   eliminated trivially.

What we could do to solve #1 is to have a "buddy" pointer from one pbm
to another.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.

They are totally unused.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] PCI: Use common routine to fetch PBM properties.

Namely bus-range and ino-bitmap.

This allows us also to eliminate pci_controller_info's
pci_{first,last}_busno fields as only the pbm ones are
used now.

Signed-off-by: David S. Miller <davem@davemloft.net>

mmc: use lock instead of claim in debug check

As mmc_detect_change() can be called from irq context, using
claim (which can sleep) is inherently unsafe. Use the host
spinlock instead, which also is faster.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

mmc: Use menuconfig objects

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

disable socket power in adapter driver instead of media one

Socket power must be fully controlled by adapter driver. This also prevents
unnecessary power-off of the socket when media driver is unloaded, yet
media remains in the socket.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits)
  Use menuconfig objects - hwmon
  hwmon/smsc47b397: Use dynamic sysfs callbacks
  hwmon/smsc47b397: Convert to a platform driver
  hwmon/w83781d: Deprecate W83627HF support
  hwmon/w83781d: Use dynamic sysfs callbacks
  hwmon/w83781d: Be less i2c_client-centric
  hwmon/w83781d: Clean up conversion macros
  hwmon/w83781d: No longer use i2c-isa
  hwmon/ams: Do not print error on systems without apple motion sensor
  hwmon/ams: Fix I2C read retry logic
  hwmon: New AD7416, AD7417 and AD7418 driver
  hwmon/coretemp: Add documentation
  hwmon: New coretemp driver
  i386: Use functions from library in msr driver
  i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu
  hwmon/lm75: Use dynamic sysfs callbacks
  hwmon/lm78: Use dynamic sysfs callbacks
  hwmon/lm78: Be less i2c_client-centric
  hwmon/lm78: No longer use i2c-isa
  hwmon: New max6650 driver
  ...

Fix sunrpc warning noise

Commit c5a4dd8b7c15927a8fbff83171b57cad675a79b9 introduced the following
compiler warnings:

net/sunrpc/sched.c:766: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'size_t'
net/sunrpc/sched.c:785: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'size_t'

  - Use %zu to format size_t
  - Kill 2 useless casts

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://oss.sgi.com:8090/xfs/xfs-2.6

* git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Add lockdep support for XFS
  [XFS] Fix race in xfs_write() b/w dmapi callout and direct I/O checks.
  [XFS] Get rid of redundant "required" in msg.
  [XFS] Export via a function xfs_buftarg_list for use by kdb/xfsidbg.
  [XFS] Remove unused ilen variable and references.
  [XFS] Fix to prevent the notorious 'NULL files' problem after a crash.
  [XFS] Fix race condition in xfs_write().
  [XFS] Fix uquota and oquota enforcement problems.
  [XFS] propogate return codes from flush routines
  [XFS] Fix quotaon syscall failures for group enforcement requests.
  [XFS] Invalidate quotacheck when mounting without a quota type.
  [XFS] reducing the number of random number functions.
  [XFS] remove more misc. unused args
  [XFS] the "aendp" arg to xfs_dir2_data_freescan is always NULL, remove it.
  [XFS] The last argument "lsn" of xfs_trans_commit() is always called with

Merge branch 'reset-seq' of /linux/kernel/git/jgarzik/libata-dev

* 'reset-seq' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata reset-seq] build and merge fixes
  libata: reimplement reset sequencing
  libata: improve ata_std_prereset()
  libata: improve 0xff status handling
  libata: add deadline support to prereset and reset methods

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
  [netdrvr] atl1: fix build
  pasemi_mac: Use local-mac-address instead of mac-address if available
  pasemi_mac: PHY support
  pasemi_mac: Add msglevel support and "debug" module param
  pasemi_mac: Logic cleanup / rx performance improvements
  pasemi_mac: Minor cleanup / define fixes
  pasemi_mac: Add SKB reuse / copy-break
  pasemi_mac: Timer and interrupt fixes
  pasemi_mac: Abstract and fix up interrupt restart routines
  pasemi_mac: Move the IRQ mapping from the PCI layer to the driver
  tc35815: Remove unnecessary skb->dev assignment
  drivers/net/dm9000: Convert to generic boolean
  AT91RM9200 Ethernet: Fix multicast addressing
  AT91RM9200 Ethernet: Support additional PHYs
  PCMCIA-NETDEV : xirc2ps_cs: bugfix of multicast code
  sky2: re-enable 88E8056 for most motherboards
  MIPS: Drop unnecessary CONFIG_ISA from RBTX49XX
  ne: MIPS: Use platform_driver for ne on RBTX49XX
  ne: Add NEEDS_PORTLIST to control ISA auto-probe
  ne: Misc fixes for platform driver.
  ...

Fix conflict in drivers/net/pasemi_mac.c (get_property() got renamed to
of_get_property()) manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'drm-patches' of /linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  via: Make sure we flush write-combining using a follow-up read.
  via: Try to improve command-buffer chaining.
  drm: remove old taskqueue remnant
  drm: rename badly named define and cleanup ioctl code spacing
  radeon: Don't mess up page flipping when a file descriptor is closed.
  drm/radeon: upgrade to 1.27 - make PCI GART more flexible

Merge /pub/scm/linux/kernel/git/dtor/input

* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
  Input: move USB miscellaneous devices under drivers/input/misc
  Input: move USB mice under drivers/input/mouse
  Input: move USB gamepads under drivers/input/joystick
  Input: move USB touchscreens under drivers/input/touchscreen
  Input: move USB tablets under drivers/input/tablet
  Input: i8042 - fix AUX port detection with some chips
  Input: aaed2000_kbd - convert to use polldev library
  Input: drivers/usb/input - usb_buffer_free() cleanup
  Input: synaptics - don't complain about failed resets
  Input: pull input.h into uinpit.h
  Input: drivers/usb/input - fix sparse warnings (signedness)
  Input: evdev - fix some sparse warnings (signedness, shadowing)
  Input: drivers/joystick - fix various sparse warnings
  Input: force feedback - make sure effect is present before playing

Merge branch 'master' of git://git./linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits)
  [POWERPC] Abolish powerpc_flash_init()
  [POWERPC] Early serial debug support for PPC44x
  [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc
  [POWERPC] Add device tree for Ebony
  [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now
  [POWERPC] MPIC U3/U4 MSI backend
  [POWERPC] MPIC MSI allocator
  [POWERPC] Enable MSI mappings for MPIC
  [POWERPC] Tell Phyp we support MSI
  [POWERPC] RTAS MSI implementation
  [POWERPC] PowerPC MSI infrastructure
  [POWERPC] Rip out the existing powerpc msi stubs
  [POWERPC] Remove use of 4level-fixup.h for ppc32
  [POWERPC] Add powerpc PCI-E reset API implementation
  [POWERPC] Holly bootwrapper
  [POWERPC] Holly DTS
  [POWERPC] Holly defconfig
  [POWERPC] Add support for 750CL Holly board
  [POWERPC] Generalize tsi108 PCI setup
  [POWERPC] Generalize tsi108 PHY types
  ...

Fixed conflict in include/asm-powerpc/kdebug.h manually

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove unused variable in get_unmapped_area

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block

* 'for-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block:
  [PATCH] ll_rw_blk: fix missing bounce in blk_rq_map_kern()
  [PATCH] splice: always call into page_cache_readahead()
  [PATCH] splice(): fix interaction with readahead

Merge branch 'for-linus' of git://git./linux/kernel/git/shaggy/jfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: Fix race waking up jfsIO kernel thread
  JFS: use __set_current_state()
  Copy i_flags to jfs inode flags on write
  JFS: document uid, gid, and umask mount options in jfs.txt

sm501fb printk warning fixes

drivers/video/sm501fb.c: In function 'sm501fb_cursor':
drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/video/sm501fb.c:992: warning: format '%08x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'

Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xilinxfb: xilinx framebuffer device driver

Add support for the video controller IP block included into Xilinx ML300 and
ML403 reference designs.

Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: fix of jumps in pm2fb_probe

This patch fixes incorrect targets of jumps when an error occurs in the
pm2fb_probe.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

skeletonfb: improvements

This patch adds a macro to register PCI ids table and corrects type of
xxxfb_fix variable to avoid modpost warnings.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: removal of pm2fb_par fields

This patch removes two redundant fields in the pm2fb_par structure.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

skeletonfb: more corrections

More corrections to skeletonfb.c file:
- fixed types of more arguments
- removed returned values in void functions
- removed not existing fb_poll function
- fixed closing comment typo
- corrected misleading constant name ADDR

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-By: James Simmons <jsimmons@infradead.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vga16fb: actually support widths in multiples of 8

vga16fb does not just support 8-pixel wide rectangles, but rectangles with
widths in multiples of 8.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vgacon: disallow console operations when in KD_GRAPHICS mode

Reported by James Pearson as:

 boot to run level 3

 if not root, then make sure /dev/console is writeable

 login and type:

 setterm -blank 0

 start X

 type into an xterm:

 while true; do echo "" > /dev/console; usleep 100000; done

 while the above loop is running switch to the text console and back
 again (Ctrl-Alt-F1 then Ctrl-Alt-F7)

 ... and the screen will be shifting (and wrapping) to the left.

This problem stems from continuously writing text to the system console (which
is in KD_TEXT mode) while the foreground console is in KD_GRAPHICS
mode. Somewhere along the way, console printing got confused and omitted the
KD_GRAPHICS/KD_TEXT test.  Thus, vgacon attempted to scroll the screen of X,
which causes X to shift.

Fix by disallowing vgacon to touch the hardware when the vc is in KD_GRAPHICS
mode. A definitive fix entails a full audit of the console code.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects II: video/logo

Change Kconfig objects from "menu, config" into "menuconfig" so that the user
can disable the whole feature without having to enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: accelerated fillrect and copyarea

This is a port of accelerated functions from 2.4 kernel.  Only fillrect and
copyarea are accelerated.  Fillrect is not accelerated in 24-bit mode.

[adaplas]
Add appropriate flags

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>