Wim Taymans [Wed, 17 Oct 2012 11:55:45 +0000 (13:55 +0200)]
rtsession: fix compiler warning
Wim Taymans [Wed, 17 Oct 2012 11:35:07 +0000 (13:35 +0200)]
rtpbin: clarify the ntp-sync option
Wim Taymans [Wed, 17 Oct 2012 11:15:48 +0000 (13:15 +0200)]
rtpsession: update caps in the source
Inform the source when caps changed. This was removed in the port to 1.0
leaving the source unaware of the clock-rate and unable to interpollate
rtp timestamps for SR packets.
Wim Taymans [Wed, 17 Oct 2012 10:46:32 +0000 (12:46 +0200)]
rtpbin: set PTS and DTS in jitterbufffer
Wim Taymans [Wed, 17 Oct 2012 10:24:22 +0000 (12:24 +0200)]
rtpbin: disable check for ntp-sync
Disable the check for the ntp-sync method. It is expected that
a rather larger offset needs to be applied with this method.
Wim Taymans [Wed, 17 Oct 2012 10:17:32 +0000 (12:17 +0200)]
rtpbin: use running-time for NTP time
When use-pipeline-clock is set, use the running-time of the
pipeline to calculate the NTP timestamps. This method would previously
only work when the base-time is set to 0 but with this change it can
also work with different offsets and we can also implement pause/resume
of the sender and receiver now.
Wim Taymans [Wed, 17 Oct 2012 08:20:12 +0000 (10:20 +0200)]
videocrop: port to videofilter
Wim Taymans [Wed, 17 Oct 2012 07:36:50 +0000 (09:36 +0200)]
videobox: use out_info for out properties
Wim Taymans [Tue, 16 Oct 2012 12:40:19 +0000 (14:40 +0200)]
median: small cleanups
Wim Taymans [Tue, 16 Oct 2012 11:56:19 +0000 (13:56 +0200)]
median: remove now that it is in videofilter
Wim Taymans [Tue, 16 Oct 2012 11:49:11 +0000 (13:49 +0200)]
configure: remove median from build
Wim Taymans [Tue, 16 Oct 2012 11:47:24 +0000 (13:47 +0200)]
videomedian: copy media to videomedian
Copy the median video filter to videofilters and rename to
videomedian.
Wim Taymans [Tue, 16 Oct 2012 11:12:21 +0000 (13:12 +0200)]
media: port to 1.0
Tim-Philipp Müller [Tue, 16 Oct 2012 00:02:11 +0000 (01:02 +0100)]
avidemux: append palette data to paletted 8-bit RGB frames
Fixes playback of 8-bit indexed RGB videos, with fixes in -base.
https://bugzilla.gnome.org/show_bug.cgi?id=686046
Sebastian Dröge [Mon, 15 Oct 2012 13:36:04 +0000 (15:36 +0200)]
vp8enc: And this time fix the default target-bitrate value for real
Sebastian Dröge [Mon, 15 Oct 2012 13:30:33 +0000 (15:30 +0200)]
vp8enc: Fix default target-bitrate value
Tim-Philipp Müller [Fri, 12 Oct 2012 23:03:29 +0000 (00:03 +0100)]
qtdemux: don't assert if upstream size is not available when guessing bitrates
Fixes abort in push mode where the source is not seekable and the
size of the file is not available, as with
cat foo.mp4 | gst-launch-1.0 playbin uri=fd://0
Less noticable with releases, since we disable all
g_assert() there.
https://bugzilla.gnome.org/show_bug.cgi?id=686008
Michael Smith [Fri, 12 Oct 2012 21:38:33 +0000 (14:38 -0700)]
qtdemux: allow more streams. Bump this constant to 32, which should be
enough for real-world files.
Michael Smith [Fri, 12 Oct 2012 21:35:24 +0000 (14:35 -0700)]
qtdemux: support more different fourcc values for other ProRes variants.
Tim-Philipp Müller [Thu, 11 Oct 2012 21:36:21 +0000 (22:36 +0100)]
examples: update some element names for 1.0 in RTP examples
gstrtpbin -> rtpbin
ffdec_* -> avdec_*
ffenc_* -> avenc_*
Wim Taymans [Wed, 10 Oct 2012 10:05:34 +0000 (12:05 +0200)]
rtspsrc: remove unused include
Rasmus Rohde [Wed, 10 Oct 2012 08:55:28 +0000 (10:55 +0200)]
multiudpsink: add multicast-iface property
udpsrc already has support for setting the multicast interface, which
is useful for multi-homed machines. This patch adds the same code to
the multiudpsink.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=685864
Wim Taymans [Wed, 10 Oct 2012 09:32:17 +0000 (11:32 +0200)]
multiudpsink: don't error on send errors but only warn
Don't error on send errors but simply post a warning, it's possible
that the next packet will be fine.
Rasmus Rohde [Wed, 10 Oct 2012 08:28:24 +0000 (10:28 +0200)]
multiudpsink: add force-ipv4 option
Add an option to the multiudpsink that makes it possible to force
the use of an IPv4 socket.
This can e.g. be used to handle the issue described in
https://bugzilla.gnome.org/show_bug.cgi?id=682481
Wim Taymans [Wed, 10 Oct 2012 08:18:52 +0000 (10:18 +0200)]
multiudpsink: remove unused field
Wim Taymans [Wed, 10 Oct 2012 08:10:26 +0000 (10:10 +0200)]
udpsrc: use negotiated allocator or pool
Use the base class to allocate a buffer for us because it knows how
to use the negotiated allocator or bufferpool.
Wim Taymans [Wed, 10 Oct 2012 08:09:37 +0000 (10:09 +0200)]
multiudpsink: post error when something goes wrong
Wim Taymans [Wed, 10 Oct 2012 08:09:10 +0000 (10:09 +0200)]
spectrum: elements post element messages
Tim-Philipp Müller [Sun, 7 Oct 2012 15:56:38 +0000 (16:56 +0100)]
Back to development (bug fixing)
Tim-Philipp Müller [Sun, 7 Oct 2012 14:31:12 +0000 (15:31 +0100)]
Release 1.0.1
Tim-Philipp Müller [Sat, 6 Oct 2012 13:57:10 +0000 (14:57 +0100)]
Automatic update of common submodule
From 6c0b52c to 6bb6951
Michael Smith [Fri, 5 Oct 2012 22:12:27 +0000 (15:12 -0700)]
deinterleave: output channels should be marked as MONO, not FRONT_LEFT, if
we're not preserving input channel positions.
Michael Smith [Thu, 4 Oct 2012 22:13:20 +0000 (15:13 -0700)]
interleave: use gst_audio_channel_positions_to_mask instead of a local copy
of half of it. Handles some values more correctly.
Rasmus Rohde [Thu, 4 Oct 2012 18:32:45 +0000 (20:32 +0200)]
gstrtpdepay: don't leak input buffer
The rtp buffer is never unmapped in the normal code exit path
of gst_rtp_gst_depay_process(..) resulting in a memory leak.
https://bugzilla.gnome.org/show_bug.cgi?id=685512
Sebastian Dröge [Thu, 4 Oct 2012 16:37:18 +0000 (18:37 +0200)]
videobalance: Add support for NV12 and NV21
Patricia Muscalu [Mon, 1 Oct 2012 13:11:05 +0000 (15:11 +0200)]
rtph264pay: do not push unmapped data
Also do not use a GstBuffer after it has been pushed into the adapter.
https://bugzilla.gnome.org/show_bug.cgi?id=685213
Michael Smith [Wed, 3 Oct 2012 17:51:45 +0000 (10:51 -0700)]
meta info: threadsafe registration using g_once
Mark Nauwelaerts [Mon, 1 Oct 2012 13:44:01 +0000 (15:44 +0200)]
avidemux: push mode; handle some initial junk before hdrl list
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=685059
Tim-Philipp Müller [Mon, 1 Oct 2012 13:03:19 +0000 (14:03 +0100)]
tests: port gdkpixbufsink test
Tim-Philipp Müller [Sat, 29 Sep 2012 10:59:31 +0000 (11:59 +0100)]
Purge references to liboil
https://bugzilla.gnome.org/show_bug.cgi?id=673285
Mark Nauwelaerts [Fri, 28 Sep 2012 14:51:01 +0000 (16:51 +0200)]
avidemux: recognize all xsub frames as keyframes
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=684977
Mark Nauwelaerts [Fri, 28 Sep 2012 14:50:25 +0000 (16:50 +0200)]
avidemux: push mode: find the correct chunk for segment following seek
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=684977
Arnaud Vrac [Thu, 27 Sep 2012 21:17:49 +0000 (22:17 +0100)]
qtdemux: fix parsing in push mode when moov atom is at the end
When playing an mp4 file with the MOOV atom at the end of the file, playback
fails with the error message "no 'moov' atom within the first 10 MB". This is
due to a mistake in the upstream_size typing, making the seek to the end of
file never happening.
https://bugzilla.gnome.org/show_bug.cgi?id=684972
Andre Moreira Magalhaes (andrunko) [Thu, 27 Sep 2012 18:50:49 +0000 (15:50 -0300)]
gamma: remove duplicate entries at format at caps
Avoids extra caps/structures processing
Wim Taymans [Thu, 27 Sep 2012 12:13:42 +0000 (14:13 +0200)]
rtpvrawdepay: negotiate pool with srcpad caps
Sebastian Dröge [Thu, 27 Sep 2012 09:02:51 +0000 (11:02 +0200)]
dvdemux: The convert and duration queries are not supposed to change the format
Tim-Philipp Müller [Wed, 26 Sep 2012 08:28:59 +0000 (09:28 +0100)]
videomixer: clear video frame more correctly
Make sure not to touch memory that doesn't belong to
our frame, we might be one part of a side-by-side 3D
frame, or in a picture-in-picture scenario.
Tim-Philipp Müller [Tue, 25 Sep 2012 23:44:59 +0000 (00:44 +0100)]
flvdemux: minor clean-up
Use GstByteWriter, because we can, and g_value_take_boxed.
Dmitriy Samonenko [Mon, 10 Sep 2012 06:27:28 +0000 (10:27 +0400)]
flvdemux: fix speex audio decoding by creating fake stream header
https://bugzilla.gnome.org/show_bug.cgi?id=683622
Tim-Philipp Müller [Tue, 25 Sep 2012 20:21:15 +0000 (21:21 +0100)]
videomixer: fix warnings when using transparent background
gst_video_frame_map() increases the refcount, which makes
the buffer not writable any more technically, so calling
gst_buffer_memset() on it will cause nasty warnings.
Unit test disabled because it very rarely (for me)
fails, possibly negotiation-related.
https://bugzilla.gnome.org/show_bug.cgi?id=684398
Robert Swain [Tue, 25 Sep 2012 08:43:28 +0000 (10:43 +0200)]
deinterlace: Add some useful debug logging
Robert Swain [Tue, 25 Sep 2012 08:41:44 +0000 (10:41 +0200)]
deinterlace: Fix telecine
This only affects behaviour in telecine cases with pattern locking
enabled. The default case should be untouched.
This works with the output from fieldanalysis at least, but the field
order looks swapped for telecine mixed buffers with the
David_slides_Schleef clip.
Edward Hervey [Tue, 25 Sep 2012 12:43:15 +0000 (14:43 +0200)]
vp8enc: Disable GLIB deprecation warnings
GValueArray has been deprecated since 2.32 ... but there's no usable
replacement for it.
See https://bugzilla.gnome.org/show_bug.cgi?id=667228
Edward Hervey [Tue, 25 Sep 2012 12:18:35 +0000 (14:18 +0200)]
videomixer: Fix leak
Tim-Philipp Müller [Mon, 24 Sep 2012 15:46:18 +0000 (16:46 +0100)]
Back to development (bug fixing)
Tim-Philipp Müller [Mon, 24 Sep 2012 13:06:42 +0000 (14:06 +0100)]
Release 1.0.0
Tim-Philipp Müller [Mon, 24 Sep 2012 10:56:56 +0000 (11:56 +0100)]
tests: remove g_printerr() that's not needed any longer
now that tcase_skip_broken_test() prints it as well.
Tim-Philipp Müller [Sun, 23 Sep 2012 18:50:42 +0000 (19:50 +0100)]
tests: disable failing replaygain tests
Tim-Philipp Müller [Sun, 23 Sep 2012 15:31:37 +0000 (16:31 +0100)]
smpte: send stream-start event
Tim-Philipp Müller [Sun, 23 Sep 2012 15:10:36 +0000 (16:10 +0100)]
multipartmux: send stream-start event
Tim-Philipp Müller [Sun, 23 Sep 2012 15:02:19 +0000 (16:02 +0100)]
matroskamux: send stream-start
Tim-Philipp Müller [Sun, 23 Sep 2012 14:57:35 +0000 (15:57 +0100)]
qtmux: send stream-start event
Tim-Philipp Müller [Sun, 23 Sep 2012 14:48:54 +0000 (15:48 +0100)]
interleave: add a bunch of FIXMEs
Needs some more work, so stream-start, caps and tags are
sent in the right order.
Tim-Philipp Müller [Sun, 23 Sep 2012 14:18:54 +0000 (15:18 +0100)]
flvmux: send stream-start event
Tim-Philipp Müller [Sun, 23 Sep 2012 14:16:14 +0000 (15:16 +0100)]
avimux: send stream-start event
Tim-Philipp Müller [Sat, 22 Sep 2012 15:08:05 +0000 (16:08 +0100)]
Automatic update of common submodule
From 4f962f7 to 6c0b52c
Tim-Philipp Müller [Fri, 21 Sep 2012 20:54:36 +0000 (21:54 +0100)]
rtspsrc: answer URI query
Without this, something also answered the query
with TRUE but without setting a uri, not sure
what that was..
Olivier Crête [Thu, 20 Sep 2012 21:28:47 +0000 (17:28 -0400)]
rtph264pay: Make sure the caps don't have duplicated sps/pps
Arun Raghavan [Thu, 20 Sep 2012 17:58:12 +0000 (19:58 +0200)]
pulsesrc: Mute stream post-connection if required
A bug in PulseAudio causes PA_STREAM_START_MUTED to be rejected on
record streams. Until this is fixed upstream, we mute the stream
manually at startup. Based on a patch by Alban Browaeys
<prahal@yahoo.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=684469
Michael Smith [Fri, 21 Sep 2012 01:00:59 +0000 (18:00 -0700)]
qtdemux: 24 bit audio here is S24LE, not S24_3LE.
Sjoerd Simons [Thu, 20 Sep 2012 08:07:24 +0000 (10:07 +0200)]
v4l2src: handle latency query before setting up the bufferpool
Fixes crash if no bufferpool is set up yet.
https://bugzilla.gnome.org/show_bug.cgi?id=684430
Arun Raghavan [Wed, 19 Sep 2012 03:47:03 +0000 (09:17 +0530)]
osxaudiosink: Specify endianness in IEC 61937 payloading
Corresponds to an API change in gst-plugins-base. This needs to be fixed
to query the expected byte order using appropriate API.
https://bugzilla.gnome.org/show_bug.cgi?id=678021
Arun Raghavan [Wed, 19 Sep 2012 03:45:53 +0000 (09:15 +0530)]
directsoundsink: Specify endianness in IEC 61937 payloading
DirectSound expects native endian byte order.
https://bugzilla.gnome.org/show_bug.cgi?id=678021
Arun Raghavan [Wed, 19 Sep 2012 03:43:11 +0000 (09:13 +0530)]
pulsesink: Specify endianness in IEC 61937 payloading
Corresponds to an API change in gst-plugins-base.
https://bugzilla.gnome.org/show_bug.cgi?id=678021
Robert Swain [Tue, 18 Sep 2012 22:39:01 +0000 (00:39 +0200)]
deinterlace: Remove incorrect logic
I don't understand why these lines were added, they don't make sense to
me now and both David and I agree that removing them moves closer to
related logic being correct, therefore, they're being removed.
I've tested a few progressive, interlaced and telecine clips and they
all behave properly timestamp-wise and visually after these changes.
Robert Swain [Tue, 18 Sep 2012 22:17:49 +0000 (00:17 +0200)]
deinterlace: Fix field duration
The frame rate fraction is correctly adjusted in the cases preceding the
field duration calculation and so the factor of 2 is incorrect.
Michael Smith [Tue, 18 Sep 2012 17:34:03 +0000 (10:34 -0700)]
videobox: Fix U/V strides for a number of cases.
Mark Nauwelaerts [Tue, 18 Sep 2012 10:13:21 +0000 (12:13 +0200)]
videomixer: init videoinfo
... to prevent random bogus caps fields.
Mark Nauwelaerts [Tue, 18 Sep 2012 10:12:39 +0000 (12:12 +0200)]
videomixer: chain up to collectpads query function
Nicolas Dufresne [Mon, 17 Sep 2012 17:17:00 +0000 (13:17 -0400)]
videomixer: Don't let GstCollectPad shadow custom sink pad query func
In the current implementation, the custom pad query function is not called.
This patch, set that query function on the GstCollectPads to avoid this
shadowing.
See https://bugzilla.gnome.org/show_bug.cgi?id=684237
Tim-Philipp Müller [Mon, 17 Sep 2012 17:23:11 +0000 (18:23 +0100)]
tests: dist image.jpg for jpeg test
Tim-Philipp Müller [Mon, 17 Sep 2012 16:57:58 +0000 (17:57 +0100)]
Release 0.11.99
Tim-Philipp Müller [Mon, 17 Sep 2012 15:53:04 +0000 (16:53 +0100)]
docs: update
Christian Fredrik Kalager Schaller [Mon, 17 Sep 2012 11:30:15 +0000 (13:30 +0200)]
Fix spec file for vp8 move
Sebastian Dröge [Mon, 17 Sep 2012 11:23:36 +0000 (13:23 +0200)]
annodex: Add to the CRUFT_DIRS
Tim-Philipp Müller [Mon, 17 Sep 2012 11:14:07 +0000 (12:14 +0100)]
docs: update
Sebastian Dröge [Mon, 17 Sep 2012 07:48:56 +0000 (09:48 +0200)]
vp8enc: Correctly finish frames
Previously we would always get the same frame if multiple frames are pending,
leaking memory of the previous frames and breaking timestamps.
Sebastian Dröge [Mon, 17 Sep 2012 07:40:41 +0000 (09:40 +0200)]
vp8enc: Allow changing bitrate and other parameters during playback
Fixes bug #648276.
Sebastian Dröge [Mon, 17 Sep 2012 07:16:39 +0000 (09:16 +0200)]
vp8enc: Store configuration in the vpx_codec_enc_cfg_t struct instead of duplicating all variables
Also protect encoder with a mutex.
Sebastian Dröge [Sun, 16 Sep 2012 14:03:06 +0000 (16:03 +0200)]
vp8enc: Update documentation to reflect new property names
...and also link to the WebM encoder parameters website.
Sebastian Dröge [Sun, 16 Sep 2012 13:57:58 +0000 (15:57 +0200)]
vp8enc: Make some property names more readable
Sebastian Dröge [Sun, 16 Sep 2012 13:47:16 +0000 (15:47 +0200)]
vp8: Add tests to .gitignore
Sebastian Dröge [Sun, 16 Sep 2012 13:46:31 +0000 (15:46 +0200)]
vp8enc: Update patch to the new property names
Sebastian Dröge [Sun, 16 Sep 2012 13:46:22 +0000 (15:46 +0200)]
vpx: Integrate test into the build system too
Wim Taymans [Tue, 7 Feb 2012 16:00:26 +0000 (17:00 +0100)]
[MOVED FROM BAD 6/6] tests: fix more unit tests
René Stadler [Thu, 24 Nov 2011 20:42:39 +0000 (21:42 +0100)]
[MOVED FROM BAD 5/6] tests: update for gstcheck API change
Sebastian Dröge [Sat, 10 Jul 2010 13:46:51 +0000 (15:46 +0200)]
[MOVED FROM BAD 4/6] vp8dec: Add simple unit test for vp8dec
Sebastian Dröge [Sat, 10 Jul 2010 13:46:43 +0000 (15:46 +0200)]
[MOVED FROM BAD 3/6] vp8enc: Improve unit test a bit
Sebastian Dröge [Sat, 10 Jul 2010 13:32:29 +0000 (15:32 +0200)]
[MOVED FROM BAD 2/6] vp8enc: Also check the output caps in the unit test
Sebastian Dröge [Sat, 10 Jul 2010 13:29:46 +0000 (15:29 +0200)]
[MOVED FROM BAD 1/6] vp8enc: Add simple unit test