Dave Airlie [Mon, 13 Jan 2020 06:49:01 +0000 (16:49 +1000)]
Merge tag 'amd-drm-next-5.6-2020-01-09' of git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.6-2020-01-09:
amdgpu:
- Enable DCN support on POWER
- Enable GFXOFF for Raven1 refresh
- Clean up MM engine idle handlers
- HDMI 2.0 audio fixes
- Fixes for some 10 bpc EDP panels
- Watermark fixes for renoir
- SR-IOV fixes
- Runtime pm robustness fixes
- Arcturus VCN fixes
- RAS fixes
- BACO fixes for Arcturus
- Stable pstate fixes for swSMU
- HDCP fixes
- PSP cleanup
- HDMI fixes
- Misc cleanups
amdkfd:
- Spread interrupt work across cores to reduce latency
- Topology fixes for APUs
- GPU reset improvements
UAPI:
- Enable DRIVER_SYNCOBJ_TIMELINE for vulkan
- Return better error values for kfd process ioctl
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109230338.8022-1-alexander.deucher@amd.com
Dave Airlie [Mon, 13 Jan 2020 01:53:01 +0000 (11:53 +1000)]
Merge tag 'drm-misc-next-2020-01-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
Cross-subsystem Changes:
- Convert simple panel bindings to a template.
Core Changes:
- Revert drm-bridge-state changes, it causes a dependency error
between drm and drm_kms_helper.
- Fix when disabling crc's.
- Assorted Kconfig fixes.
Driver Changes:
- Add ddc symlinks to more drivers.
- Fix chained bridge handling in exynos and vc4.
- More clock rate fixes in sun4i.
- Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP,
BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels.
- Assorted small bugfixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8d4944-68d7-0df3-f39b-31f6fba22a2a@linux.intel.com
Felix Kuehling [Thu, 5 Dec 2019 02:23:08 +0000 (21:23 -0500)]
drm/amdkfd: Improve kfd_process lookup in kfd_ioctl
Use filep->private_data to store a pointer to the kfd_process data
structure. Take an extra reference for that, which gets released in
the kfd_release callback. Check that the process calling kfd_ioctl
is the same that opened the file descriptor. Return -EBADF if it's
not, so that this error can be distinguished in user mode.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Miquel Raynal [Thu, 9 Jan 2020 18:40:37 +0000 (19:40 +0100)]
drm/panel: simple: Add Satoz SAT050AT40H12R2 panel support
Add support for the Satoz SAT050AT40H12R2 panel.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109184037.9091-2-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 9 Jan 2020 18:40:36 +0000 (19:40 +0100)]
dt-bindings: display: simple: Add Satoz panel
Satoz is a Chinese TFT manufacturer.
Website: http://www.sat-sz.com/English/index.html
Add the compatible for its SAT050AT40H12R2 5.0 inch LCD panel.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109184037.9091-1-miquel.raynal@bootlin.com
Maxime Ripard [Fri, 3 Jan 2020 15:27:58 +0000 (16:27 +0100)]
dt-bindings: display: Convert Allwinner display pipeline to schemas
The Allwinner SoCs have a display engine composed of several controllers
assembled differently depending on the SoC, the number and type of output
they have, and the additional features they provide. A number of those are
supported in Linux, with the matching bindings.
Now that we have the DT validation in place, let's split into separate file
and convert the device tree bindings for those controllers to schemas.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103152801.47254-1-maxime@cerno.tech
Benjamin Gaignard [Tue, 19 Nov 2019 10:57:53 +0000 (11:57 +0100)]
drm/fb-cma-helpers: Fix include issue
Exported functions prototypes are missing in drm_fb_cma_helper.c
Include drm_fb_cma_helper to fix that issue.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119105753.32363-1-benjamin.gaignard@st.com
Benjamin Gaignard [Tue, 10 Dec 2019 10:24:37 +0000 (11:24 +0100)]
drm/modes: tag unused variables to avoid warnings
Some variables are set but never used. To avoid warning when compiling
with W=1 and keep the algorithm like it is tag theses variables
with _maybe_unused macro.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210102437.19377-1-benjamin.gaignard@st.com
Tobias Schramm [Thu, 9 Jan 2020 11:29:52 +0000 (12:29 +0100)]
drm/panel: Add support for BOE NV140FHM-N49 panel to panel-simple
This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple
driver. The panel is used by the pine64 Pinebook Pro.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109112952.2620-2-t.schramm@manjaro.org
Sam Ravnborg [Thu, 9 Jan 2020 13:48:41 +0000 (14:48 +0100)]
dt-bindings: display: add BOE 14" panel
Add bindings for the BOE NV140FHM-N49 14" 1920x1080 panel.
The panel is used by the pine64 Pinebook Pro.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tobias Schramm <t.schramm@manjaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109140742.GA12940@ravnborg.org
Linus Walleij [Thu, 9 Jan 2020 07:28:15 +0000 (08:28 +0100)]
drm/panel: Add driver for Sony ACX424AKP panel
The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org
Thomas Zimmermann [Mon, 6 Jan 2020 14:10:16 +0000 (15:10 +0100)]
drm/udl: Make udl driver depend on CONFIG_USB
The udl driver for DisplayLink devices depends on support for host-side
USB controllers, which is enabled with CONFIG_USB. Plain USB support as
given by CONFIG_USB_SUPPORT is not sufficient.
This patch changes dependencies for udl to depend on CONFIG_USB, instead
of CONFIG_USB_SUPPORT. Users will have to enable CONFIG_USB and select a
USB host controller. With this change udl dependencies work the same way
as dependencies for PCI drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106141016.9562-1-tzimmermann@suse.de
Hans Verkuil [Fri, 6 Dec 2019 11:26:08 +0000 (12:26 +0100)]
drm/Kconfig: add missing 'depends on DRM' for DRM_DP_CEC
Add a missing 'depends on DRM' for the DRM_DP_CEC config
option. Without that enabling DRM_DP_CEC will force CEC_CORE
to =y instead of =m if DRM=m as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/489bdaae-9b05-2d70-12e1-4fda7899dfc1@xs4all.nl
Paul Cercueil [Thu, 9 Jan 2020 00:30:00 +0000 (21:30 -0300)]
dt-bindings: panel-simple: Add compatible for Sharp LS020B1DD01D
Add a compatible string for the Sharp LS020B1DD01D 2" HQVGA TFT LCD
panel, and remove the old sharp,ls020b1dd01d.txt documentation which is
now obsolete.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109003000.119516-2-paul@crapouillou.net
Paul Cercueil [Thu, 9 Jan 2020 00:29:59 +0000 (21:29 -0300)]
dt-bindings: panel-simple: Add compatible for GiantPlus GPM940B0
Add a compatible string for the GiantPlus GPM740B0 3" QVGA TFT LCD
panel, and remove the old giantplus,gpm740b0.txt documentation which is
now obsolete.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109003000.119516-1-paul@crapouillou.net
Qiang Yu [Wed, 1 Jan 2020 10:38:31 +0000 (18:38 +0800)]
drm/lima: use drm_sched_fault for error task handling
drm_sched_job_timedout works with drm_sched_stop as a pair,
so we'd better use the drm_sched_fault helper to make the
error and timeout handling go the same path.
This also fixes application hang when task error.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200101103831.22429-1-yuq825@gmail.com
Dave Airlie [Thu, 9 Jan 2020 00:46:07 +0000 (10:46 +1000)]
Merge tag 'drm-misc-next-2020-01-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Allow overriding number of bootup penguins in fbcon using fbcon=logo-count:n.
Cross-subsystem Changes:
- fbdev fixes for mmp, and make it work with CONFIG_COMPILE_TEST.
- Use devm_platform_ioremap_resource in fbdev drivers.
- Various small fbdev fixes.
Core Changes:
- Support scanline alignment for dumb buffers.
- Add atomic_check() hook to bridge ops, to support bus format negotiation.
- Add gem_create_object() to vram helpers.
Driver Changes:
- Rockchip: Add support for PX30.
- Use generic fbdev code and dumb helpers in hisilicon/hibmc.
- Add support for Leadtek LTK500HD1829 panel, and xinpeng XPP055C272.
- Clock fixes for atmel-hlcdc.
- Various smaller fixes to all drivers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8eff1e3f-ef0a-2dd9-9a14-6273b1d6f963@linux.intel.com
Laurent Pinchart [Thu, 19 Dec 2019 10:37:03 +0000 (12:37 +0200)]
drm: of: Fix linking when CONFIG_OF is not set
The new helper drm_of_lvds_get_dual_link_pixel_order() introduced in
commit
6529007522de has a fallback stub when CONFIG_OF is not set, but
the stub is declared in drm_of.h without a static inline. This causes
multiple definitions of the function to be linked when the CONFIG_OF
option isn't set. Fix it by making the stub static inline.
Fixes:
6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219103703.8547-1-laurent.pinchart+renesas@ideasonboard.com
Rob Clark [Wed, 8 Jan 2020 23:53:56 +0000 (15:53 -0800)]
drm/panel: Add support for AUO B116XAK01 panel
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108235356.918189-2-robdclark@gmail.com
Rob Clark [Wed, 8 Jan 2020 23:53:55 +0000 (15:53 -0800)]
dt-bindings: display: panel: Add AUO B116XAK01 panel bindings
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108235356.918189-1-robdclark@gmail.com
Miquel Raynal [Mon, 6 Jan 2020 15:18:25 +0000 (16:18 +0100)]
dt-bindings: Add vendor prefix for Satoz
Satoz is a Chinese TFT manufacturer.
Website: http://www.sat-sz.com/English/index.html
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106151827.31511-1-miquel.raynal@bootlin.com
Sam Ravnborg [Thu, 2 Jan 2020 10:17:11 +0000 (11:17 +0100)]
dt-bindings: one binding file for all simple panels
There is an increasing number of new simple panels.
Common for many of these simple panels are that they have one
mandatory power-supply and some of them have backlight and / or
an enable gpio.
The binding file to describe these panels adds overhead
that really do not add value.
The binding are known and there is nothing gained from a
dedicated binding file nor for any dedicated example.
The following patch introduces a single panel-simple.yaml
and converts two ampire bindings over to the new file.
The conversion - if applied will have following effects:
- The maintainer for the individual file will change
There is no need for many different maintainers for a simple binding.
We have the same situation with the panel-simple driver in the kernel.
- The license will change to (GPL-2.0-only OR BSD-2-Clause)
There is usually only a single line copied from the original
file, a line that is often copied from a datasheet.
This license change should be acceptable considered what little
is copied.
If the license change is not OK we can use a dedicated binding
file in these cases.
This is a follow-up on Rob's big patch converting a lot of panel bindings
to individual files:
"dt-bindings: display: Convert a bunch of panels to DT schema"
https://patchwork.ozlabs.org/patch/1197683/
The objectives with one file for the relevant simple panels are:
- Make it simpler to add bindings for simple panels
- Keep the number of bindings file lower and thus easier to find a
relevant file to copy from when adding new panels.
- Keep the binding documentation for simple panels more consistent
- Make it simpler to add support for new panels
v3:
- Whitespace fix (checkpatch)
- Indent compatible (Rob h)
- Indent comments to give compatible more visibility (Rob h)
v2:
- spelling fixes (imirkin via irc, Rob)
- updated description (Rob)
- list properires in alphabetical order
- added power-supply to example (Rob)
- updated title
- reworded changelog a little
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200102101712.5085-2-sam@ravnborg.org
Dan Carpenter [Wed, 8 Jan 2020 05:43:12 +0000 (08:43 +0300)]
gpu/drm: clean up white space in drm_legacy_lock_master_cleanup()
We moved this code to a different file and accidentally deleted a
newline.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108054312.yzlj5wmbdktejgob@kili.mountain
Wambui Karuga [Thu, 2 Jan 2020 09:55:15 +0000 (12:55 +0300)]
drm/omapdrm: use BUG_ON macro for error debugging.
Since the if statement only checks for the value of the `id` variable,
it can be replaced by the more concise BUG_ON() macro for error
reporting.
Issue found using coccinelle.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102095515.7106-1-wambui.karugax@gmail.com
Arnd Bergmann [Tue, 7 Jan 2020 21:46:37 +0000 (22:46 +0100)]
drm: meson: fix address type confusion
Casting a pointer to dma_addr_t produces a warning:
drivers/gpu/drm/meson/meson_rdma.c: In function 'meson_rdma_free':
drivers/gpu/drm/meson/meson_rdma.c:59:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
priv->rdma.addr_phys = (dma_addr_t)NULL;
In this case, it's worse because the variable name has the suffix
'_phys', which often indicates a phys_addr_t rather than dma_addr_t,
i.e. yet another incompatible type.
Change it to use consistent naming and avoid NULL.
Fixes:
63fba242c464 ("drm/meson: add RDMA module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107214653.1173199-1-arnd@arndb.de
Chen Zhou [Fri, 27 Dec 2019 11:48:11 +0000 (19:48 +0800)]
drm/gma500: remove set but not used variables 'hist_reg'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/gma500/psb_irq.c: In function psb_irq_turn_off_dpst:
drivers/gpu/drm/gma500/psb_irq.c:473:6:
warning: variable hist_reg set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227114811.14907-1-chenzhou10@huawei.com
Maxime Ripard [Tue, 7 Jan 2020 16:59:57 +0000 (17:59 +0100)]
drm/sun4i: drc: Make sure we enforce the clock rate
The DRC needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-2-maxime@cerno.tech
Maxime Ripard [Tue, 7 Jan 2020 16:59:56 +0000 (17:59 +0100)]
drm/sun4i: backend: Make sure we enforce the clock rate
The backend needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-1-maxime@cerno.tech
Boris Brezillon [Fri, 27 Dec 2019 14:41:24 +0000 (15:41 +0100)]
drm/exynos: dsi: Fix bridge chain handling
Commit
05193dc38197 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the Exynos driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:
1/ list_splice() was used to move chain elements to our own internal
chain, but list_splice() does not reset the source list to an empty
state, leading to unexpected bridge hook calls when
drm_bridge_chain_xxx() helpers were called by the core. Replacing
the list_splice() call by list_splice_init() fixes this problem.
2/ drm_bridge_chain_xxx() helpers operate on the
bridge->encoder->bridge_chain list, which is now empty. When the
helper uses list_for_each_entry_reverse() we end up with no operation
done which is not what we want. But that's even worse when the helper
uses list_for_each_entry_from(), because in that case we end up in
an infinite loop searching for the list head element which is no
longer encoder->bridge_chain but exynos_dsi->bridge_chain. To address
that problem we stop using the bridge chain helpers and call the
hooks directly.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes:
05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-3-boris.brezillon@collabora.com
Boris Brezillon [Fri, 27 Dec 2019 14:41:23 +0000 (15:41 +0100)]
drm/vc4: dsi: Fix bridge chain handling
Commit
05193dc38197 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the VC4 driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:
1/ list_splice() was used to move chain elements to our own internal
chain, but list_splice() does not reset the source list to an empty
state, leading to unexpected bridge hook calls when
drm_bridge_chain_xxx() helpers were called by the core. Replacing
those list_splice() calls by list_splice_init() ones fixes this
problem.
2/ drm_bridge_chain_xxx() helpers operate on the
bridge->encoder->bridge_chain list, which is now empty. When the
helper uses list_for_each_entry_reverse() we end up with no operation
done which is not what we want. But that's even worse when the helper
uses list_for_each_entry_from(), because in that case we end up in
an infinite loop searching for the list head element which is no
longer encoder->bridge_chain but vc4_dsi->bridge_chain. To address
that problem we stop using the bridge chain helpers and call the
hooks directly.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Eric Anholt <eric@anholt.net>
Fixes:
05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-2-boris.brezillon@collabora.com
kbuild test robot [Sat, 4 Jan 2020 20:43:31 +0000 (21:43 +0100)]
video: fbdev: mmp: fix platform_get_irq.cocci warnings
Remove dev_err() messages after platform_get_irq*() failures.
Line 450 is redundant because platform_get_irq() already prints
an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Fixes:
dd90e9ae55a1 ("video: fbdev: mmp: add COMPILE_TEST support")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2001042140310.6944@hadrien
Boris Brezillon [Tue, 7 Jan 2020 18:58:07 +0000 (19:58 +0100)]
Revert "drm/bridge: Add a drm_bridge_state object"
This reverts commit
6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state
object") which introduced a circular dependency between drm.ko and
drm_kms_helper.ko. Looks like the helper/core split is not appropriate
and fixing that is not simple.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-6-boris.brezillon@collabora.com
Boris Brezillon [Tue, 7 Jan 2020 18:58:06 +0000 (19:58 +0100)]
Revert "drm/bridge: Patch atomic hooks to take a drm_bridge_state"
This reverts commit
f7619a58ef92 ("drm/bridge: Patch atomic hooks to
take a drm_bridge_state"). Commit
6ed7e9625fa6 ("drm/bridge: Add a
drm_bridge_state object") introduced a circular dependency between
drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the
whole thing was implemented. Let's revert all patches depending on the
bridge_state infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-5-boris.brezillon@collabora.com
Boris Brezillon [Tue, 7 Jan 2020 18:58:05 +0000 (19:58 +0100)]
Revert "drm/bridge: Add an ->atomic_check() hook"
This reverts commit
b86d895524ab ("drm/bridge: Add an ->atomic_check()
hook"). Commit
6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state
object") introduced a circular dependency between drm.ko and
drm_kms_helper.ko which uncovered a misdesign in how the whole thing
was implemented. Let's revert all patches depending on the bridge_state
infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-4-boris.brezillon@collabora.com
Boris Brezillon [Tue, 7 Jan 2020 18:58:04 +0000 (19:58 +0100)]
Revert "drm/bridge: Add the necessary bits to support bus format negotiation"
This reverts commit
e351e4d5eaec ("drm/bridge: Add the necessary bits
to support bus format negotiation"). Commit
6ed7e9625fa6 ("drm/bridge:
Add a drm_bridge_state object") introduced a circular dependency
between drm.ko and drm_kms_helper.ko which uncovered a misdesign in
how the whole thing was implemented. Let's revert all patches depending
on the bridge_state infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-3-boris.brezillon@collabora.com
Boris Brezillon [Tue, 7 Jan 2020 18:58:03 +0000 (19:58 +0100)]
Revert "drm/bridge: Fix a NULL pointer dereference in drm_atomic_bridge_chain_check()"
This reverts commit
b18398c16e17 ("drm/bridge: Fix a NULL pointer
dereference in drm_atomic_bridge_chain_check()"). Commit
6ed7e9625fa6
("drm/bridge: Add a drm_bridge_state object") introduced a circular
dependency between drm.ko and drm_kms_helper.ko which uncovered a
misdesign in how the whole thing was implemented. Let's revert all
patches depending on the bridge_state infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-2-boris.brezillon@collabora.com
Dingchen Zhang [Fri, 26 Jul 2019 17:37:43 +0000 (13:37 -0400)]
drm: Set crc->opened to false before setting crc source to NULL.
to terminate the while-loop in drm_dp_aux_crc_work when
drm_dp_start/stop_crc are called in the hook to set crc source.
v3: set crc->opened to false without checking (Nick)
v2: Move spin_lock around entire crc->opened use (Daniel)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726173743.11641-1-dingchen.zhang@amd.com
Dingchen Zhang [Mon, 10 Jun 2019 13:47:51 +0000 (09:47 -0400)]
drm: remove the newline for CRC source name.
userspace may transfer a newline, and this terminating newline
is replaced by a '\0' to avoid followup issues.
'len-1' is the index to replace the newline of CRC source name.
v3: typo fix (Sam)
v2: update patch subject, body and format. (Sam)
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610134751.14356-1-dingchen.zhang@amd.com
Andrzej Pietrasiewicz [Thu, 2 Jan 2020 13:23:00 +0000 (14:23 +0100)]
drm: zte: Provide ddc symlink in vga connector sysfs directory
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-5-andrzej.p@collabora.com
Andrzej Pietrasiewicz [Thu, 2 Jan 2020 13:22:59 +0000 (14:22 +0100)]
drm: zte: Provide ddc symlink in hdmi connector sysfs directory
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-4-andrzej.p@collabora.com
Andrzej Pietrasiewicz [Thu, 2 Jan 2020 13:22:58 +0000 (14:22 +0100)]
drm/vc4: Provide ddc symlink in connector sysfs directory
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-3-andrzej.p@collabora.com
Andrzej Pietrasiewicz [Thu, 2 Jan 2020 13:22:57 +0000 (14:22 +0100)]
drm/tegra: Provide ddc symlink in output connector sysfs directory
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-2-andrzej.p@collabora.com
Thomas Anderson [Mon, 2 Dec 2019 21:47:13 +0000 (13:47 -0800)]
drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded
For high-res (8K) or HFR (4K120) displays, using uncompressed pixel
formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the
"interesting" modes would be disabled, leaving only low-res or low
framerate modes.
This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS
clock is exceeded. Verified that 8K30 and 4K120 are now available and
working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaodong Yan [Fri, 6 Dec 2019 10:43:53 +0000 (18:43 +0800)]
drm/amd/display: add event type check before restart the authentication
[Why]
Some combined docks will always trigger CP_IRQ but there's nothing the driver
needs to take care of, but the CP_IRQ breaks the original hdcp state and
triggers the driver to restart the authentication.
[How]
Add the event type check before restart the authentication or resend the stream
management
Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Mon, 23 Sep 2019 12:47:47 +0000 (08:47 -0400)]
drm/amd/display: Add delay after h' watchdog timeout event
[WHY]
Some monitors trigger HDCP2.x timeout after reinitializing (e.g. toggling HDR)
by taking longer than expected to return h' (h prime)
Previously the 200ms watchdog timer retry count would hit
MAX_NUM_OF_ATTEMPTS (4), causing fallback to HDCP1.x
[HOW]
Adding a 1s delay after an h' watchdog timeout provides enough time
for affected monitors to return h' in time without hitting MAX_NUM_OF_ATTEMPTS
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jing Zhou [Thu, 14 Nov 2019 08:39:52 +0000 (16:39 +0800)]
drm/amd/display: rx_validation failed resume from sleep
[why]
Most DP/HDMI monitors need more time to response rx_validation
request.
[how]
Add generic 1000ms delay.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Tue, 3 Dec 2019 20:55:13 +0000 (15:55 -0500)]
drm/amd/display: Return correct Error code for validate h_prime
[Why]
We are returning incorrect error code for validate h prime
[How]
Return the right Error code
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Tue, 3 Dec 2019 20:47:53 +0000 (15:47 -0500)]
drm/amd/display: Fix hdcp1 create session
[Why]
PSP needs session ID to destroy a session, In the case where we fail
create session we don't have a session ID
[How]
Set the session ID before returning
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 12 Dec 2019 16:44:18 +0000 (11:44 -0500)]
drm/amd/display: fix psp return condition for hdcp module
We are returning SUCCESS when hdcp_status != Success. Fix it.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wambui Karuga [Fri, 3 Jan 2020 19:18:52 +0000 (22:18 +0300)]
drm/amd: use list_for_each_entry for list iteration.
list_for_each() can be replaced by the more concise
list_for_each_entry() here for iteration over the lists.
This change was reported by coccinelle.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wambui Karuga [Fri, 3 Jan 2020 13:20:35 +0000 (16:20 +0300)]
drm/radeon: remove unnecessary braces around conditionals.
As single statement conditionals do not need to be wrapped around
braces, the unnecessary braces can be removed.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wambui Karuga [Fri, 3 Jan 2020 13:19:12 +0000 (16:19 +0300)]
drm/radeon: remove boolean checks in if statements.
Remove unnecessary variable comparisions to true/false in if statements
and check the value of the variable directly.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 6 Jan 2020 20:24:47 +0000 (15:24 -0500)]
Revert "drm/amdgpu: Set no-retry as default."
This reverts commit
51bfac71cade386966791a8db87a5912781d249f.
This causes stability issues on some raven boards. Revert
for now until a proper fix is completed.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/934
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206017
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 6 Jan 2020 19:55:54 +0000 (14:55 -0500)]
drm/amdgpu/gfx: simplify old firmware warning
Put it on one line to avoid whitespace issues when
printing in the log.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 6 Jan 2020 18:21:56 +0000 (13:21 -0500)]
drm/amdgpu/gmc10: use common invalidation engine helper
Rather than open coding it. This also changes the free masks
to better reflect the usage by other components.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 6 Jan 2020 18:14:27 +0000 (13:14 -0500)]
drm/amdgpu/gmc: move invaliation bitmap setup to common code
So it can be shared with newer GMC versions.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Tue, 7 Jan 2020 09:00:00 +0000 (17:00 +0800)]
drm/amdgpu: updated UMC error address record with correct channel index
defined macros for repetitive for loops
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Tue, 7 Jan 2020 06:16:05 +0000 (14:16 +0800)]
drm/amdgpu: resolved bug in UMC RAS CE query
switch CE counter register access' to use SMN
disable UMC indexing mode
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 3 Jan 2020 09:03:21 +0000 (17:03 +0800)]
drm/amd/powerplay: cleanup the interfaces for powergate setting through SMU
Provided an unified entry point. And fixed the confusing that the API
usage is conflict with what the naming implies.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 3 Jan 2020 06:24:56 +0000 (14:24 +0800)]
drm/amd/powerplay: issue proper hdp flush for table transferring
Guard the content consistence between the view of GPU and CPU
during the table transferring.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 3 Jan 2020 06:18:22 +0000 (14:18 +0800)]
drm/amd/powerplay: refine code to support no-dpm case
With "dpm=0", there will be no DPM enabled. The code
needs to be refined to support this.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 31 Dec 2019 02:39:34 +0000 (10:39 +0800)]
drm/amd/powerplay: unified VRAM address for driver table interaction with SMU V2
By this, we can avoid to pass in the VRAM address on every table
transferring. That puts extra unnecessary traffics on SMU on
some cases(e.g. polling the amdgpu_pm_info sysfs interface).
V2: document what the driver table is for and how it works
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 31 Dec 2019 02:33:19 +0000 (10:33 +0800)]
drm/amd/powerplay: cache the watermark settings on system memory
So that we do not need to allocate a piece of VRAM for it. This
is a preparation for coming change which unifies the VRAM address
for all driver tables interaction with SMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 26 Dec 2019 07:02:37 +0000 (15:02 +0800)]
drm/amdgpu/smu: custom pstate profiling clock frequence for navi series asics
add navi10 & navi14 pstate profiling clock value support.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhigang Luo [Fri, 13 Dec 2019 19:41:32 +0000 (14:41 -0500)]
drm/amd/amdgpu: L1 Policy(5/5) - removed IH_CHICKEN from VF
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Jane Jian <jane.jian@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhigang Luo [Tue, 10 Dec 2019 15:16:31 +0000 (10:16 -0500)]
drm/amd/amdgpu: L1 Policy(3/5) - removed ECC interrupt from VF
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Jane Jian <jane.jian@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhigang Luo [Mon, 2 Dec 2019 14:50:19 +0000 (09:50 -0500)]
drm/amd/amdgpu: L1 Policy(2/5) - removed GC GRBM violations from gfxhub
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Jane Jian <jane.jian@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhigang Luo [Thu, 14 Nov 2019 21:53:58 +0000 (16:53 -0500)]
drm/amd/amdgpu: L1 Policy(1/5) - removed VM settings for mmhub and gfxhub from VF
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Jane Jian <jane.jian@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Fri, 3 Jan 2020 09:27:48 +0000 (17:27 +0800)]
drm/amdgpu: removed GFX RAS support check in UMC ECC callback
enable GPU recovery in event of uncorrectable UMC error
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Fri, 3 Jan 2020 09:27:04 +0000 (17:27 +0800)]
drm/amdgpu: added function to wait for PSP BL availability
reduced duplicate code
increased wait time for PSP BL readiness
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 2 Jan 2020 05:59:17 +0000 (13:59 +0800)]
drm/amdgpu: use linux size macro to simplify ONE_Kib & One_Mib
replace internal size macro with linux size macro
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Fri, 3 Jan 2020 03:55:42 +0000 (11:55 +0800)]
drm/amdgpu: resolve bug in UMC 6 error counter query
iterate over all error counter registers in SMN space
removed support error counter access via MMIO
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 2 Jan 2020 01:41:54 +0000 (09:41 +0800)]
drm/amd/powerplay: add smu11_driver_if_arcturus.h new OOB members
This is to fit the latest SMC firmware and it's backward compatible.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Zhang [Fri, 27 Dec 2019 06:44:03 +0000 (14:44 +0800)]
amd/amdgpu/sriov tdr enablement with pp_onevf_mode
Under sriov and pp_onevf mode,
1.take resume instead of hw_init for smc recover to avoid
potential memory leak.
2.add return condition inside smc resume function for
sriov_pp_onevf_mode and pm_enabled param.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Zhang [Tue, 10 Dec 2019 02:51:01 +0000 (10:51 +0800)]
amd/amdgpu/sriov enable onevf mode for ARCTURUS VF
Before, initialization of smu ip block would be skipped
for sriov ASICs. But if there's only one VF being used,
guest driver should be able to dump some HW info such as
clks, temperature,etc.
To solve this, now after onevf mode is enabled, host
driver will notify guest. If it's onevf mode, guest will
do smu hw_init and skip some steps in normal smu hw_init
flow because host driver has already done it for smu.
With this fix, guest app can talk with smu and dump hw
information from smu.
v2: refine the logic for pm_enabled.Skip hw_init by not
changing pm_enabled.
v3: refine is_support_sw_smu and fix some indentation
issue.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 30 Dec 2019 09:08:29 +0000 (17:08 +0800)]
drm/amd/powerplay: retrieve the enabled feature mask from cache
This is why those feature mask members designed for. And this
can reduce the SMU workload.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 30 Dec 2019 03:27:32 +0000 (11:27 +0800)]
drm/amd/powerplay: avoid deadlock on Vega20 swSMU routine
The lock required was already hold by its parent API.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Thu, 2 Jan 2020 03:32:15 +0000 (11:32 +0800)]
drm/amdgpu: update UMC 6.1 RAS error counter register access path
use proper method for SMN register access
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 26 Dec 2019 06:41:22 +0000 (14:41 +0800)]
drm/amdgpu/smu: add helper function smu_get_dpm_level_range() for smu driver
this function can help smu driver to query dpm level clock range from
smu firmware.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
yu kuai [Thu, 26 Dec 2019 12:07:50 +0000 (20:07 +0800)]
drm/radeon: remove three set but not used variable
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/radeon/radeon_atombios.c: In function
‘radeon_get_atom_connector_info_from_object_table’:
drivers/gpu/drm/radeon/radeon_atombios.c:651:26: warning: variable
‘grph_obj_num’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/radeon/radeon_atombios.c:651:13: warning: variable
‘grph_obj_id’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/radeon/radeon_atombios.c:573:37: warning: variable
‘con_obj_type’ set but not used [-Wunused-but-set-variable]
They are never used, and so can be removed.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Wed, 25 Dec 2019 09:42:35 +0000 (17:42 +0800)]
drm/amdgpu/powerplay: fix NULL pointer issue when SMU disabled
Fix smu related NULL pointer issue which occurs when SMU is disabled.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Mon, 23 Dec 2019 10:17:36 +0000 (18:17 +0800)]
drm/amdgpu/smu: use unified variable smu->is_apu to check apu asic platform
use unified variable smu->is_apu to check apu asic in smu driver.
related patch:
drm/amd/powerplay: bypass dpm_context null pointer check guard for some
smu series
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Thu, 26 Dec 2019 03:27:46 +0000 (11:27 +0800)]
drm/amdgpu: amalgamated PSP TA invoke functions
reduce duplicate code
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Thu, 26 Dec 2019 03:19:36 +0000 (11:19 +0800)]
drm/amdgpu: amalgamate PSP TA load/unload functions
reduce duplicate code
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Thu, 26 Dec 2019 03:13:53 +0000 (11:13 +0800)]
drm/amdgpu: by default output PSP ret status in event of cmd failure
update log level from DRM_DEBUG_DRIVER to DRM_WARN
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 23 Dec 2019 08:13:48 +0000 (16:13 +0800)]
drm/amdgpu: correct RLC firmwares loading sequence
Per confirmation with RLC firmware team, the RLC should
be unhalted after all RLC related firmwares uploaded.
However, in fact the RLC is unhalted immediately after
RLCG firmware uploaded. And that may causes unexpected
PSP hang on loading the succeeding RLC save restore
list related firmwares.
So, we correct the firmware loading sequence to load
RLC save restore list related firmwares before RLCG
ucode. That will help to get around this issue.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 24 Dec 2019 09:22:18 +0000 (17:22 +0800)]
drm/amd/powerplay: add check for baco support on Arcturus
This is used to determine whether runtime pm can be
supported or not.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Tue, 24 Dec 2019 03:27:43 +0000 (11:27 +0800)]
drm/amd/display: use true, false for bool variable in display_rq_dlg_calc_21.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:85:6-13: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:88:2-9: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:225:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:226:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:251:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:252:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:256:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:257:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:267:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:269:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:682:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c:1013:1-9: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Tue, 24 Dec 2019 03:27:42 +0000 (11:27 +0800)]
drm/amd/display: use true, false for bool variable in display_rq_dlg_calc_20v2.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:110:6-13: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:113:2-9: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:243:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:244:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:267:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:268:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:272:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:273:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:283:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:285:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:673:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c:962:1-9: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Tue, 24 Dec 2019 03:27:41 +0000 (11:27 +0800)]
drm/amd/display: use true, false for bool variable in display_rq_dlg_calc_20.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:110:6-13: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:113:2-9: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:243:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:244:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:267:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:268:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:272:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:273:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:283:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:285:3-11: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:673:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20.c:961:1-9: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Tue, 24 Dec 2019 03:27:40 +0000 (11:27 +0800)]
drm/amd/display: use true, false for bool variable in dce_calcs.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:157:46-64: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:159:2-20: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:161:46-64: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:163:2-20: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:289:1-12: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:290:1-12: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:341:3-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:343:4-15: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Tue, 24 Dec 2019 03:27:39 +0000 (11:27 +0800)]
drm/amd/display: use true, false for bool variable in display_mode_vba_21.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c:4124:3-28: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c:4128:5-30: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c:5207:3-37: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Tue, 24 Dec 2019 03:27:38 +0000 (11:27 +0800)]
drm/amd/display: use true, false for bool variable in dcn20_hwseq.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c:186:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c:189:2-10: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Tue, 24 Dec 2019 03:27:37 +0000 (11:27 +0800)]
drm/amd/display: use true, false for bool variable in dcn10_hw_sequencer.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:482:6-14: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:485:2-10: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Tue, 24 Dec 2019 03:27:36 +0000 (11:27 +0800)]
drm/amd/display: use true, false for bool variable in dc_link_ddc.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c:593:6-9: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Tue, 24 Dec 2019 02:08:14 +0000 (10:08 +0800)]
drm/amd/powerplay: use true, false for bool variable in vega20_hwmgr.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c:875:1-31: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 20 Dec 2019 21:34:42 +0000 (16:34 -0500)]
drm/amdgpu/smu: make the set_performance_level logic easier to follow
Have every asic provide a callback for this rather than a mix
of generic and asic specific code.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 20 Dec 2019 23:57:16 +0000 (18:57 -0500)]
Revert "drm/amdgpu: simplify ATPX detection"
This reverts commit
f5fda6d89afe6e9cedaa1c3303903c905262f6e8.
You can't use BASE_CLASS in pci_get_class.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/995
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Tue, 24 Dec 2019 06:28:30 +0000 (14:28 +0800)]
drm/amdgpu: simplify function return logic
Former return logic is redundant.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 17 Dec 2019 07:25:56 +0000 (15:25 +0800)]
drm/amd/powerplay: support custom power profile setting
Support custom power profile mode settings on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>