greybus: interface: clear upper 16-bits of version_id and product_id

Current userspace looks through the sysfs interface entries for
matching vendor_id and product_id any time an interface is opened
by module developers.  The upper 16-bits of ES3 vendor_id and
product_id contain a reverse mask of the lower 16-bits.  This
additional information is never used and should be removed so
that every consumer of these sysfs entries doesn't have to perform
the same bit clearing logic.

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Revert "arche-apb-ctrl: Remove extra delay in APB reset"

We are seeing failures on DB3.1 board, and Axel root-caused it to this
commit, so revert it as of now.

This reverts commit 942627227684c187b727ba5fb581bc2d886b6708.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: spi: add device_type field to device config

Add device_type field in device config operation to get the type of
device and try to expose less the kernel internal over greybus.
This include the spidev, spi-nor will fetch the correct nor id over
jede and a modalias that will have the previous behavior (name will set
the driver to be loaded).

As at it, fix a trivial error path and return immediately.

Tested: using gbsim and confirming that a spidev and mtd device were
created.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: uart: fix double free of tty port

When inserting and removing a module with a UART protocol defined a
double free of the tty_port would happen and that would generate a lot
of kernel oops in different places related to memory corruption.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: power_supply: rework get descriptors

Rework the get property descriptors function to fix a memory handling
error for the response structure. This could corrupt the stack and
throw nonalignment PC or SP error:

Internal error: SP or PC abort: 8a000000 1 PREEMPT SMP
Modules linked in: gb_power_supply(O) gb_arche(O) gb_camera(O) gb_es2(O) gb_vibrator(O) gb_raw(O) g]
CPU: 3 PID: 51 Comm: kworker/u16:2 Tainted: G W O 3.10.73-g8a6af60-00118-g599a5c1 #1
Workqueue: greybus1:svc gb_svc_connection_destroy [greybus]
task: ffffffc0ba249580 ti: ffffffc0ba294000 task.ti: ffffffc0ba294000
PC is at gb_power_supply_connection_init+0x81/0x1dc [gb_power_supply]
LR is at gb_power_supply_connection_init+0x81/0x1dc [gb_power_supply]
pc : [<ffffffbffc03b901>] lr : [<ffffffbffc03b901>] pstate: 80000145
sp : ffffffc0ba297a00
x29: 32002e002a001100 x28: ffffffc042cb2c80

To fix this, allocate firstly the operation and handle request and
response using operation payload.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Add missing return value

Add missing return value assignement when changing unipro power mode to
PWM-G1.

Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Reset link speed on failed config

Improve the management of unipro power mode changes in response
to a configure_stream operation.
When sending a "test only" request to camera module, do not change power
mode to HS-G2 as no frame will be actually transmitted.
When receiveing an "adjusted" configuration response, reset power
mode to PWM-G1.

Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-apb-ctrl: Remove extra delay in APB reset

With synchronization between SVC <=> AP over wake/detect line to
bring APB's out of reset, we do not need any extra delays now.
So remove it.

Testing Done: Tested for 10 iterations on EVT1

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: fix sparse warning in manifest.c

The cport id field is a le16, so treat it as such when comparing it to
something else.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio_manager: add missing header

There's a definition missing in audio_manager causing the kernel build
to fail:

  CC [M]  ./greybus/audio_manager.o
./greybus/audio_manager.c:22:8: warning: type defaults to 'int' in declaration of 'DEFINE_IDA' [-Wimplicit-int]
error, forbidden warning: audio_manager.c:22
./kernel/scripts/Makefile.build:308: recipe for target './greybus/audio_manager.o' failed

Including linux/idr.h fixes the issue.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: use variable 'is_connected' to maintain module state

there is race condition between _disconnect() request &
stop_trigger() in case of abrupt module removal.
And sometimes this can lead to deadlock while acquiring
codec_info->lock.
To avoid such situation, atomic variable is used to maintain
codec connected state.
During dai operations (trigger, shutdown, etc.), 'is_connected'
variable is validated to avoid unnecessary lock acquire in
case module already removed.

Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: codec driver cleanup

audio codec driver is now moved to bundle driver approach.
This resolved many race conditions related to audio mgmt &
data connection init/exit sequence.
Thus, a lot of helper functions can now be safely removed.

Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: Fix sparse warnings around locking

The callers ensures that connection->lock is taken before calling few
routines, but that isn't enough for sparse as it sees an unexpected
unlock.

greybus/connection.c:380:29: warning: context imbalance in 'gb_connection_cancel_operations' - unexpected unlock

Fix that adding __must_lock() attribute to the function declaration.

This also adds the attribute for
gb_connection_flush_incoming_operations(), which isn't showing any
sparse warnings with the current state of code, but with minor
rearrangements of the code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: lsgb: remove it, it's in the gb-utils repo

lsgb does not need to be in this repo, it gets installed as part of
gb-utils now.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: control: Fix sparse warnings

gb_control_get_version() is not used outside of the file and must be
marked as static. Following sparse warnings are reported today:

greybus/control.c:20:5: warning: symbol 'gb_control_get_version' was not declared. Should it be static?

Fix it by marking gb_control_get_version() 'static'.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: Fix sparse warnings

greybus/audio_apbridgea.c:13:5: warning: symbol 'gb_audio_apbridgea_set_config' was not declared. Should it be static?
greybus/audio_apbridgea.c:30:5: warning: symbol 'gb_audio_apbridgea_register_cport' was not declared. Should it be static?
greybus/audio_apbridgea.c:44:5: warning: symbol 'gb_audio_apbridgea_unregister_cport' was not declared. Should it be static?
greybus/audio_apbridgea.c:58:5: warning: symbol 'gb_audio_apbridgea_set_tx_data_size' was not declared. Should it be static?
greybus/audio_apbridgea.c:72:5: warning: symbol 'gb_audio_apbridgea_get_tx_delay' was not declared. Should it be static?
greybus/audio_apbridgea.c:80:5: warning: symbol 'gb_audio_apbridgea_start_tx' was not declared. Should it be static?
greybus/audio_apbridgea.c:94:5: warning: symbol 'gb_audio_apbridgea_stop_tx' was not declared. Should it be static?
greybus/audio_apbridgea.c:106:5: warning: symbol 'gb_audio_apbridgea_set_rx_data_size' was not declared. Should it be static?
greybus/audio_apbridgea.c:120:5: warning: symbol 'gb_audio_apbridgea_get_rx_delay' was not declared. Should it be static?
greybus/audio_apbridgea.c:128:5: warning: symbol 'gb_audio_apbridgea_start_rx' was not declared. Should it be static?
greybus/audio_apbridgea.c:141:5: warning: symbol 'gb_audio_apbridgea_stop_rx' was not declared. Should it be static?
greybus/audio_gb.c:14:5: warning: symbol 'gb_audio_gb_get_topology' was not declared. Should it be static?
greybus/audio_gb.c:48:5: warning: symbol 'gb_audio_gb_get_control' was not declared. Should it be static?
greybus/audio_gb.c:70:5: warning: symbol 'gb_audio_gb_set_control' was not declared. Should it be static?
greybus/audio_gb.c:85:5: warning: symbol 'gb_audio_gb_enable_widget' was not declared. Should it be static?
greybus/audio_gb.c:97:5: warning: symbol 'gb_audio_gb_disable_widget' was not declared. Should it be static?
greybus/audio_gb.c:109:5: warning: symbol 'gb_audio_gb_get_pcm' was not declared. Should it be static?
greybus/audio_gb.c:133:5: warning: symbol 'gb_audio_gb_set_pcm' was not declared. Should it be static?
greybus/audio_gb.c:150:5: warning: symbol 'gb_audio_gb_set_tx_data_size' was not declared. Should it be static?
greybus/audio_gb.c:163:5: warning: symbol 'gb_audio_gb_get_tx_delay' was not declared. Should it be static?
greybus/audio_gb.c:183:5: warning: symbol 'gb_audio_gb_activate_tx' was not declared. Should it be static?
greybus/audio_gb.c:195:5: warning: symbol 'gb_audio_gb_deactivate_tx' was not declared. Should it be static?
greybus/audio_gb.c:207:5: warning: symbol 'gb_audio_gb_set_rx_data_size' was not declared. Should it be static?
greybus/audio_gb.c:220:5: warning: symbol 'gb_audio_gb_get_rx_delay' was not declared. Should it be static?
greybus/audio_gb.c:240:5: warning: symbol 'gb_audio_gb_activate_rx' was not declared. Should it be static?
greybus/audio_gb.c:252:5: warning: symbol 'gb_audio_gb_deactivate_rx' was not declared. Should it be static?

Fix them by including the header that declares the exported routines.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio_manager: use an 'ida' for the module id

Every time we hotplug an audio module, we get a new audio module id.  We
should recycle them instead of just constantly incrementing the number
so we don't see things like:
[178016.832580] Created audio module #6124
in the kernel logs.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback_test: Decrease the max number of devices

Its unrealistic to expect 50 loopback devices,
and the mask parameter can hold up to "int" anyways
so decrease to max number of devices to sane value.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: firmware: convert to bundle driver

Convert the legacy firmware protocol driver to a bundle driver.

This also fixes a potential crash should a (malicious) module have sent
an early request before the private data had been initialised.

Note that the firmware protocol needs to support the version request
indefinitely since it has been burnt into ROM.

In order to avoid having to update current module-loading scripts, keep
this driver internal to greybus core at least until modalias support is
added.

Note that there is no MODULE_DEVICE_TABLE defined for firmware as we
cannot have two greybus tables in one module on ancient 3.10 kernels and
that the legacy driver is currently also internal to core. This needs be
added once the driver can be built as a module.

Testing Done: Tested on DB3.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: legacy: remove unimplemented classes from id table

Remove the unimplemented display, sensor, and svc classes from the
device-id table.

As Viresh noted the SVC protocol is special and having an SVC class
doesn't really make sense at all. Either way, the SVC protocol is
already implemented by core.

Testing Done: Compiled

Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: reduce wait between WAKE_OUT checks

SVC WAKE_OUT loop is estimated 400ms during which wake_detect line
is pulled low for AP detection.  On AP side we have 500ms delay
between checks.  To avoid timing issues, reduce delay between
checks and raise total # of checks so that overall time for sequence
is the same.

Testing Done:
- Used for DB3.5/EVT1.5 hardware during bringup
- Regression tested on DB3.1+ES2, DB3.1+ES3

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: assert wake-detect to complete WAKE_OUT event

After SVC generates WAKE_OUT (pulling wake-detect pin low) and APB is
brought out of reset, we need to assert wake-detect again to complete
SVC WAKE_OUT logic.

Testing Done:
- Used for DB3.5/EVT1.5 hardware during bringup
- Regression tested on DB3.1+ES2, DB3.1+ES3

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: bring SVC out of reset later in probe

Move SVC deassert reset to after wake-detect pin has been pulled
low in probe.  Otherwise, SVC may trigger WAKE_OUT based on a
default high signal.

Testing Done:
- Used for DB3.5/EVT1.5 hardware during bringup
- Regression tested on DB3.1+ES2, DB3.1+ES3

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: ensure wake-detect pin is deasserted

During DB3.5 bringup, it was noted that wake_detect signal was not
properly generating SVC edge IRQ.  To ensure signal goes from low
to high correctly, let's bring signal low (regardless of default
pin state).

Testing Done:
- Used for DB3.5/EVT1.5 hardware during bringup
- Regression tested on DB3.1+ES2, DB3.1+ES3

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: hd: fix host-device-removal race

Make sure to tear down the svc and flush any on-going hotplug processing
before removing the remaining interfaces.

This fixes crashes due to host-device removal racing with svc
hotplug/unplug processing (e.g. at "UniPro restart").

Testing Done:
Verified that this fixes crashes reproducible on SDB when unloading the
host-device driver module while generating hotplug/unplug events.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: Rename Audio class and remove the unused one

There should be a single class macro for Audio and two protocol macros.
Rename class with value 0x12 as GREYBUS_CLASS_AUDIO and remove the other
unused class GREYBUS_CLASS_AUDIO_DATA.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio_codec: convert to bundle driver

Convert the legacy audio management and data protocol drivers to a
bundle driver.

The Audio bundle driver can support a single management and any number
of data cports, and so we expect multiple data cports to be present for
the bundle during initialization.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio_codec: Free gccodec on dia probe failure

We aren't freeing the codec, that we allocated before failing to probe
the connection. Free it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio_codec: Free gccodec on codec probe failure

We aren't freeing the codec, that we allocated before failing to probe
the connection. Free it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: legacy: fix a null pointer dereference

When gb_protocol_get() fails in legacy_connection_create(), we end up
bailing-out before assigning lc->connection and lc->protocol. Calling
legacy_connection_destroy() in that case results in a null pointer
dereference.

Check if lc->connection is not null before freeing it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback_test: make output to csv file a parameter option

Its useful to get a CSV output on stdout for test frameworks to read
and parse the results. However, a csv file is not always needed.

Add the -z option to  create/append a csv file only when the user
asks for it.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc watchdog: allow it to be enabled/disabled from userspace

Sometimes you want to disable the SVC watchdog without having to patch
your kernel, so provide a sysfs file to do this.  This can let us do
power measurements, and let the firmware developers not go crazy
worrying that the kernel is going to reset their chips with no notice.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: only build module against msm kernel

The camera driver currently does not build against anything other than
the msm kernel, due to cross-dependancies, so enable that here so that
we can build against other kernels without failing the build.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tested-by: Marti Bolivar <mbolivar@leaflabs.com>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: double the ping delay timeout

Sometimes the ping response comes back _right_ after we timed out, as
the svc got its act together and squeaked out the ack, yet we miss it
and reset the whole bus.  Double the delay to hopefully give the svc a
little more of a chance to fix itself.  Odds are, it's still in trouble,
but we can just hold off resetting it for a bit more...

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: arche-platform: Disable clock as part of driver remove

As part of driver remove (cleanup) function, disable the clock for both
SVC, APB1 & APB2.

Testing Done:
Tested on EVT1 platform with Connect=>disconnect=>connect
iteration, almost close to 100 iterations have passed (demo branch).
And also tested with kernel-only build.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Stream config change unipro speed

Unipro network speed was increased at camera initialization time and
never slowed down.
This unnecessary drains power during the entire time camera module is
plugged in.
Increasing/decreasing unipro link speed before issuing stream
configuration request to camera module prevents this from happening.

Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: return proper error code on watchdog create error

When the watchdog is not created properly, we need to propagate the
error for this and not just return success.

Reported-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: add a "watchdog" to check the network health

Now that we have a svc ping command, let's add a watchdog to call it
every so often (1 second at the moment.)  If it finds something went
wrong, post a stern message to the kernel log and call:
start unipro_reset
to reset the whole greybus hardware subsystem.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: lsgb: Minor tweaks

Make it executable on an Android system
Change layout to be show heirachy a bit better.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: add semiplanar and planar formats

This change adds missing planar and semiplanar
formats from gb specification.

Mbus to Gb format map:
V4L2_MBUS_FMT_NV12_1x8 -> 0x12
V4L2_MBUS_FMT_NV21_1x8 -> 0x13
V4L2_MBUS_FMT_YV12_1x8 -> 0x16
V4L2_MBUS_FMT_YU12_1x8 -> 0x17

Change depends on:
"media: add new mediabus format enums for ara camera"

Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: Expose and retain VID/PID received from bootrom for ES2

ES2 chips doesn't have efuses for storing module's vendor_id and
product_id and so we have hacked bootrom earlier using firmware
protocol, so that VID/PID can be received for fetching firmware
packages.

Another requirement is to expose them to sysfs, so that modules can be
identified properly.

That can be easily solved by updating interface's VID/PID, when fetched
using firmware protocol and later reusing them while the module switches
its identity from bootrom to firmware.

Do that only if the module is ES2 and the VID/PID sent during hotplug
are both 0.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: lsgb: add lsgb shell script

Horrid hack, but a start at making it easier for people to see what is
currently connected without having to deal with poking around in sysfs
directly.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio_codec: update codec_name as per driver->name

Originally, driver->name was not poluated from GB and thus
manually set from audio_codec driver as a hack.
This is no more required.
Another patch already removes that hack.

Now, with new driver->name as "legacy.<id-bundle.interface>"
codec is registered with different name.
So, during DAI link registration as well it needs modification.

Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: firmware: abort if AP_READY fails

Abort if the AP_READY request fails.

Also update the comment suggesting that this operation was a temporary
one.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: vibrator: convert to bundle driver

Convert the legacy vibrator protocol driver to a bundle driver.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: hid: convert to bundle driver

Convert the legacy HID protocol driver to a bundle driver.

This also fixes a potential crash should a (malicious) module have sent
an early request before the private data had been initialised.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: hid: clean up init error paths

Separate success and error paths more clearly.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: set request handlers at creation

Set the connection request handler at creation rather than when enabling
the connection.

This is possible now that connections are created by the drivers that
use them rather than by core at manifest parsing time.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: legacy: look up protocol at connection creation

Look up legacy protocol at connection create instead of at init.

Note that we can now look up the protocol before even creating the
actual connection. This is needed to be able to set a connection request
handler when creating the connection rather than when enabling it.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: remove legacy protocol id from core

Remove legacy protocol-id field that is only used by the legacy-protocol
driver from the connection structure.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: legacy: add initialized flag

Add initialized flag and use instead of the connection protocol pointer
to determine when the legacy connection has been initialised.

This is a step in moving legacy connection binding to
connection-creation time.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: legacy: refactor legacy-connection handling

Add wrapper structure for legacy connections and add helpers to create
and destroy legacy connections.

This is a step in removing legacy connection fields from the core
structures.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: return error-valued pointer on creation errors

Return an ERR_PTR on errors when creating connections.

This allows driver probe to fail with a more informative error message
as not all connection creation errors are due to memory exhaustion.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: rename connection-create interface

Drop the _dynamic suffix from the exported interface that drivers use to
create connections.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: simplify connection-creation interface

Simplify the exported generic interface for creating dynamic
connections.

Since all driver connections will have a bundle we can drop the
redundant interface parameter.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: drop the legacy protocol-id parameter

The protocol-id parameter is only used by the legacy driver so remove
it from the generic interface and move it to the legacy driver until it
can be removed completely.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: add helper to create control connections

Add dedicated helper to create control connections.

This will allow us to simplify the generic (dynamic) interface.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: drop protocol parameter from static interface

Drop legacy protocol parameter from static connection interface.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: manifest: check for duplicate CPort descriptors when parsing

Now that connection creation has been separated from interface
initialisation, we should explicitly check for duplicate CPort
descriptors when parsing the manifest.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: core: defer connection creation to driver probe

Defer connection creation to bundle driver probe instead of creating
them when initialising the interface and parsing the manifest.

Store copies of the CPorts descriptors in the bundle for the drivers to
use, and update the legacy driver.

This is needed for drivers that need more control over host-device
resource management, for example, when a protocol needs to use a
dedicated host CPort for traffic offloading (e.g. camera data).

This also avoids allocating host CPorts for bundles that are not bound
to a driver or for remote CPorts that a driver does not need.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: add bundle class to the bundle uevent

When bundles are added and then removed, we have a race where we go to
read the sysfs file, but it is now for a different bundle than the
uevent was originally for.  So add the bundle class to the uevent so we
"know" what the correct bundle class was.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: add ping command

This implements the SVC "ping" command.  It's tiny and simple, but we
need something like this in order for us to "know" if all is working
well.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: firmware: log the name of the firmware being requested

People are getting confused as to what the firmware file name is for
their module, so log it to make it easier to find modules with "blank"
vid/pid values and let people know what to name their firmware files.

Because we are now logging this, turn the debug message after the
firmware request into an error message if something fails.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: add key event handling

Add a new input device associated with the SVC to handle key events.
This new events are transfer over a new greybus svc operation which is
unidirectional.

It was selected the KEY_A for representing the KEY_ARA_BUTTON key code.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio_codec: Don't be tricky with the driver model

With the recent changes by Johan to the driver model of the greybus
code, the audio_codec no longer should need to provide a "dummy" driver
when registering the codec.  In fact, having it there causes the greybus
core to crash when inserting the module.  Removing it all fixes the
crash.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: legacy: add private driver data

Allocate private data structure at probe and release at disconnect.

The private data will be used to track the connections managed by the
driver, but for now only holds a count of the number of cports the
bundle has.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: make cport lookup thread-safe

Use the gb_connection_mutex when making sure a remote CPort is
available.

This is needed when moving to driver-managed connections that can be
created and destroyed at any time.

Also check for duplicate bundle-less connections.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: serialise connection creation

Serialise connection creation against concurrent creation and
destruction using a global mutex.

This is needed to prevent two drivers from attempting to create a
connection to the same interface CPort and to cope with a racing
connection destroy when moving to driver managed connections.

Note that the locking can not (easily) be made more fine-grained as not
all connections have an interface, but these are not hot paths anyway.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: fix lookup race

Fix longstanding race that could lead to a connection being destroyed
while processing an incoming message due to missing reference counting
when looking up the connection.

Add helpers to manipulate the connection kref.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: drop the connection_mutex

Drop the useless connection_mutex that did not, and can not be used to
prevent connection lookup races in atomic context and therefore serves
no purpose.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: destroy workqueue at unregister

Destroy the work queue when the connection is destroyed/deregistered
instead of when the last reference is dropped.

The work queue is not needed once the connection has been deregistered,
and no operations will ever be added to it again (handled by checking
connection->state) even if the connection object may not be deallocated
until the final reference is dropped.

The work-queue name is set based on the host-device name and host-device
cport id, something which guarantees a unique name. This would no longer
be true if the work queue was not destroyed at connection deregistration
as a new connection could then be created for that very same host cport.

This is not necessarily a problem unless some work queue features are
used that require unique work-queue names, but let's try to be well
behaved.

Also update an obsolete comment and make explicit that a connection must
be disabled before being destroyed.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: remove WARN_ON from destroy

Remove WARN_ON from connection destroy testing for a NULL-connection
when destroying a connection.

This will allow for simpler driver code when releasing driver-managed
connections.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: control: add bundle-version operation

Add bundle-version operation to fetch the version of the bundle class.

Retrieve the bundle version of all bundles when initialising the
interface in case the control-protocol version is greater than 0.1.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: remove broken protocol-version handling

Remove the broken legacy protocol-version handling from core and move it
to the legacy driver instead.

Note that version handling has always been broken as legacy protocols
were looked up and bound to connections before the connections were
enabled and version negotiation could take place (over that very
connection). Document that in the legacy driver as well.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: store protocol version

Store the "negotiated" protocol version to use in the svc state
struct instead of the connection struct.

The generic concept of a connection version is going away in favour of
bundle-class versions.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: core: disable bundle connections on hot-unplug

Disable bundle connections in core before calling driver disconnect in
case the interface is already gone.

This avoids unnecessary timeouts on hot-unplug when a driver does I/O in
its disconnect callback.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: legacy: use protocol pointer to determine state

Use the protocol pointer to determine the legacy connection state.

This is needed to allow core disable connections when an interface has
been hot-unplugged without the legacy protocols leaking its resources.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: move legacy-protocol handling to legacy driver

Move legacy protocol and connection handling to the legacy driver.

Rename the former global functions using a common legacy_ prefix.

Note that all legacy protocols suffer from a connection initialisation
race in that the protocol-specific initialisation, which includes
allocation of protocol-specific state containers, can not happen until
*after* the connection has been enabled. This is a major flaw in the
original design that we can now finally address by converting the legacy
protocol drivers into proper bundle (class) drivers.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: drop legacy-protocol dependency

Drop dependency on the legacy protocol abstraction.

Remove the now unused and last legacy-protocol flag
GB_PROTOCOL_SKIP_VERSION along with the protocol-flag feature.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: control: drop legacy-protocol dependency

Drop dependency on the legacy protocol abstraction.

Instead implement the protocol-specific version request directly, and
use the new interface for managing the control connection.

Note that the version request is being removed from most protocols, but
we need to keep the current request for the control protocol as-is
indefinitely to maintain backwards compatibility (e.g. with the ES2/ES3
bootrom).

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: greybus_protocols: remove control-protocol version

Remove control-protocol version from the exported protocol definitions
as it is an implementation detail that makes no sense to export.

Currently gbsim uses the kernel's control-protocol version definitions
directly instead of reporting the version of the protocol it actually
implements.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: remove skip-connected legacy protocol flags

Remove the legacy protocol flags that were used to suppress the
connected and disconnected events.

Instead send the connected and disconnected event for all bundle
connections and explicitly exclude static connections and control
connections.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: firmware: remove skip-disconnected flag

Remove the legacy protocol flag that was used to suppress sending the
control disconnected operation.

Instead rely on the fact that no control operations will be sent by
core to an interface that has been removed (e.g. after having received a
new hotplug event after the bootrom has jumped to the new image).

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: core: add defensive connection disable post disconnect

Bundle drivers *must* disable their connections in the disconnect
callback, but add a defensive test and warn about buggy drivers
nonetheless.

Note that bundle drivers would generally release their state containers
in disconnect so a failure stop I/O could potentially lead to
use-after-free bugs in any late operation completion callbacks.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: core: disable incoming operations pre disconnect

Disable and flush incoming operations before calling driver disconnect.

Bundle drivers are still responsible for disabling their connections
in their disconnect callback.

Note that specifically the legacy protocols must have incoming
operations disabled when their connection_exit callback is called as
that is where their state is deallocated.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: add helper to disable incoming operations

Add helper to disable and flush incoming operations.

This is intended to be used by core to flush any incoming requests
before calling driver disconnect, but could potentially later be
exported for driver use as well.

Note that we currently flush all incoming operation and allow the
request handlers to run, but cancel any responses sent. This may need to
be refined later.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: add unidirectional enabled state

Add a new connection state ENABLED_TX in which only outgoing operations
are allowed.

This allows drivers to query the device during probe before allocating
their state containers without having to worry about racing incoming
requests.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: make connection enable/disable thread safe

Add connection mutex to protect connection enabling and disabling.

This is needed to eventually allow drivers to manage the state of their
connections during operation (i.e. post probe and pre disconnect).

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: disable operations on enable errors

Make sure to cancel all (incoming) operations when failing to enable a
connection.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: clean up operation cancellation on disable

Move helper to cancel active operations above gb_connection_enable and
simplify locking.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: always cancel operations on connection disable

Always cancel all operations on connection disable and remove the now
unused DESTROYING state.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: add per-connection request handlers

Add a connection request-handler field to struct gb_connection that is
set when the connection is enabled.

This is a step towards removing the legacy protocol abstraction from
core, and will also be used to implement unidirectional connection
states (e.g. only outgoing operations are allowed).

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: remove disable from destructor

Remove implicit disable of legacy connections from the destructor.

This is a step towards removing the legacy-protocol handling from core.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: rename legacy init and exit functions

Rename legacy connection init and exit functions.

This is a step towards removing the legacy-protocol handling from core.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: legacy: add legacy-protocol bundle driver

Add the first Greybus bundle driver that will be used when transitioning
from legacy Greybus protocols to bundle drivers.

The legacy-protocol driver initially binds to all current bundle classes.

In order to avoid having to update current module-loading scripts, keep
this driver internal to greybus core at least until modalias support is
added. Note that this prevents unloading any protocol drivers without
first tearing down the host device due to a circular module dependency.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Update configure stream based on new interface

Interface has been changed.
return code will not return number of configured streams but
just error code.
Number of streams is passed as pointer and if operation result
is changed number of streams will be updated.

Flags are also used for information regarding configure stream
operation result.

Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Add support for configure streams flag in gb interface

Update gb interface and export flags needed for latest
protocol version. Number of streams also can be changed
based on operation result.
Caller sets input flags, end fucntion return output
flags

Input flags supported:
- GB_CAMERA_IN_FLAG_TEST - Need to be set when operation
is not actually applied.

Output flags supported:
- GB_CAMERA_OUT_FLAG_ADJUSTED - This is result of the operation
if this flag is set, result is adjusted and operation
need to be repeat.

Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: firmware: replace colons with underscore in firmware file request

Due to some issues with handling colons in Android (and possibly
future exposure to other problems) we should remove the colons from
the firmware file request.  Replacing them with underscores.

Specifically, we copy firmware into the Android build using a line
similar to this:
PRODUCT_COPY_FILES += \
    source-repo/ara:00000126:00001000:00000001:00000001:02.tftf:system/etc/firmware/ara:00000126:00001000:00000001:00000001:02.tftf

There is a colon delimiter between the source and destination in the
PRODUCT_COPY_FILES format.  The greybus naming logic breaks the parsing
routine and generates an Android build break.

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Revert "camera: Fix backword compatibility in configure streams"

This reverts commit 48cc91e52dba9abad4c9b56f911994c65071bfc4 as the
caller should be changed instead.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: camera: Fix backword compatibility in configure streams

Configure streams ret code should be number of streams in
gb operation exported to HOST camera.
Until gb operation is migrated to new interface return
number of streams in ret code.

Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>