Yaowu Xu [Wed, 11 Mar 2015 02:06:52 +0000 (19:06 -0700)]
Separate rd_thresh adaption by ref_frame
Only update the rd_thresh factors for modes sharing same reference
frame. This helps overall compression of 6 and 7 by .13% and .19%
respectively without any noticeable speed difference.
Change-Id: Idb3a3879512c5d7d0880034516079949290690c5
Yunqing Wang [Tue, 10 Mar 2015 17:52:55 +0000 (10:52 -0700)]
Merge "Accumulate tx_totals counters in multi-threaded encoder"
Yaowu Xu [Tue, 10 Mar 2015 17:48:52 +0000 (10:48 -0700)]
Merge "Enable using Golden reference in choose_partition()"
paulwilkins [Tue, 10 Mar 2015 17:45:02 +0000 (10:45 -0700)]
Merge "Allow q adjustment for VPX_CQ and VPX_CBR."
Yunqing Wang [Tue, 10 Mar 2015 16:53:45 +0000 (09:53 -0700)]
Accumulate tx_totals counters in multi-threaded encoder
Tx_totals counters weren't handled correctly in multi-thread
case, which caused the mismatch while encoding using threads > 1.
This patch fixed that.
Change-Id: Ice9b0386f57175fb92a0bdcd5042686a3106246a
Adrian Grange [Tue, 10 Mar 2015 16:14:54 +0000 (09:14 -0700)]
Fix vp9_compute_qdelta_by_rate loop behavior
The return value from vp9_compute_qdelta_by_rate, which is
a delta value for the quantizer, could never be 0 if
(qindex == rc->worst_quality).
This occurs because target_index was setup unconditionally
in the loop and yet the loop counter stopped at
(rc->worst_quality - 1).
Change-Id: I6b59cd9b5811ff33357e71cd7d814c5e53d291f2
Yaowu Xu [Fri, 6 Mar 2015 21:45:39 +0000 (13:45 -0800)]
Enable using Golden reference in choose_partition()
Choose_partition uses only the last frame as reference frame in making
partition decision, this commit adds the check on how well Golden
frame with (0,0) predicts the current block, and uses GF(0,0) as
basis for partition decision if it produces better prediction.
The commit improves rtc speed 6 and 7 encoding by 0.14% and 0.19%
respectively.
Change-Id: I156acf925bd6e0b586d48155d1940d27270a3915
Frank Galligan [Mon, 9 Mar 2015 23:25:01 +0000 (16:25 -0700)]
Refactor read_intra_frame_mode_info
Change-Id: I56b0614154408e8ec613784b2007374df00fbf17
Alex Converse [Mon, 9 Mar 2015 20:02:16 +0000 (13:02 -0700)]
Merge "Don't waste time partitioning skip superblocks."
Jingning Han [Mon, 9 Mar 2015 19:27:19 +0000 (12:27 -0700)]
Merge "Skip golden ref frame check when it is same as last ref frame"
Jingning Han [Mon, 9 Mar 2015 17:59:29 +0000 (10:59 -0700)]
Skip golden ref frame check when it is same as last ref frame
When golden reference frame is refreshed, the next frame has both
its last and golden reference frames point to the same reference
frame in real-time coding mode. Experiments suggest that using
two separate reference frames for frames right after golden refresh
frame does not provide further compression performance advantage.
This commit hence retains the current encoder implementation and
shuts off the mode search over golden reference frame in this case.
It makes the encoder run slightly faster at no coding performance
change.
Change-Id: I1561f7799253a10e675d05c63c1749fe9e85b472
Alex Converse [Mon, 9 Mar 2015 17:45:38 +0000 (10:45 -0700)]
Don't waste time partitioning skip superblocks.
Force 64x64 partitioning when a whole superblock is SEGMENT_LVL_SKIP. This
drops encode times of screens mostly at rest by 20%.
Change-Id: Ieba554b0b8a0c1679aae784a8bd11f038ab942c3
paulwilkins [Mon, 9 Mar 2015 17:12:33 +0000 (17:12 +0000)]
Allow q adjustment for VPX_CQ and VPX_CBR.
Adjustment previously only enabled in VBR mode.
This patch allows adjustment of min and max q for CBR
and adjustment of max q only for CQ mode.
Change-Id: Id5e583f3d50453cd544fc57249acacd946457482
Marco [Fri, 6 Mar 2015 18:47:09 +0000 (10:47 -0800)]
Add aq-mode=3 to ethread test.
Change-Id: I619a2be502f1d2eb0ae746f7fcb465d19ddae048
Yunqing Wang [Mon, 9 Mar 2015 16:42:12 +0000 (09:42 -0700)]
Merge "vp9_ethread: fix me consts initialization to support aq_mode=3 encoding"
Jingning Han [Mon, 9 Mar 2015 16:34:26 +0000 (09:34 -0700)]
Merge "Move pred_mv assign outside integral projection motion search"
Deb Mukherjee [Mon, 9 Mar 2015 16:21:35 +0000 (09:21 -0700)]
Merge "Reduce default overshoot/undershoot params to 25"
Yunqing Wang [Mon, 9 Mar 2015 15:35:57 +0000 (08:35 -0700)]
Merge "Modify the setting of transform skip flags in non-rd mode"
Yunqing Wang [Fri, 6 Mar 2015 23:17:59 +0000 (15:17 -0800)]
vp9_ethread: fix me consts initialization to support aq_mode=3 encoding
While turning on "--aq_mode=3", the quantizers are updated by each
thread. Fixed the me consts initialization function to make sure
that the correct thread data are updated.
Change-Id: Ied27bb7bae76fc3fa2cda4f8c35ac0b46271bef4
Johann [Sat, 7 Mar 2015 00:04:59 +0000 (16:04 -0800)]
Merge "Cherry pick libyuv VS fix"
Johann [Fri, 6 Mar 2015 20:25:14 +0000 (12:25 -0800)]
Cherry pick libyuv VS fix
Change-Id: I1f2e077af87d29b07eaf7acaec8d955e00da9333
hkuang [Tue, 3 Mar 2015 01:15:00 +0000 (17:15 -0800)]
Remove some unnecessary code in thread context copy.
Change-Id: Iddf098e1bae9c10fc2f325f84156f50a0bd0055a
Hangyu Kuang [Fri, 6 Mar 2015 18:27:26 +0000 (10:27 -0800)]
Merge "Only wait for previous frame's motion vector if needed."
Marco [Fri, 6 Mar 2015 18:00:18 +0000 (10:00 -0800)]
Merge "Set the threads/tile_columns in vpx_temporal_svc_encoder."
Marco [Fri, 6 Mar 2015 17:51:21 +0000 (09:51 -0800)]
Set the threads/tile_columns in vpx_temporal_svc_encoder.
Change-Id: I794e8b64f26ebe68d7f18c3a11cb7c80e1cd3110
Yunqing Wang [Thu, 5 Mar 2015 17:44:18 +0000 (09:44 -0800)]
Modify the setting of transform skip flags in non-rd mode
While searching for the best mode in non-rd case, SSE of
a partition block is calculated and the transform size is set.
This patch rewrites the skip checking conditions based on
transform size instead of partition size to be more precise.
Small gains were seen in rtc set borg test (speed 6).
AVG PSNR: 0.087%, overall PSNR: 0.073%, SSIM: 0.146%.
No noticeable speed change.
Change-Id: I5603ca5339c784dfa02263f4005988ccd8c32f6e
Yaowu Xu [Fri, 6 Mar 2015 15:27:58 +0000 (07:27 -0800)]
Merge changes I1b972c94,I9c897d32
* changes:
Prevent invalid memory access
Use correct bsize for uv
Hangyu Kuang [Mon, 2 Mar 2015 21:59:03 +0000 (13:59 -0800)]
Only wait for previous frame's motion vector if needed.
Change-Id: Iecce685a33b64844446c0009f21bc85566d7469f
Yaowu Xu [Thu, 5 Mar 2015 22:57:11 +0000 (14:57 -0800)]
Prevent invalid memory access
Change-Id: I1b972c945274254d896d772d859840b2f8211b4f
hkuang [Thu, 5 Mar 2015 22:55:27 +0000 (14:55 -0800)]
Merge "Fix a tsan error bug in frame parallel decode."
Alex Converse [Thu, 5 Mar 2015 22:43:42 +0000 (14:43 -0800)]
Merge changes I219c287b,I6adee670
* changes:
Call encoder control before running ethread test.
Don't copy thread data for the main thread.
Alex Converse [Thu, 5 Mar 2015 22:43:38 +0000 (14:43 -0800)]
Merge "Fix misleading indentation."
Alex Converse [Thu, 5 Mar 2015 19:47:21 +0000 (11:47 -0800)]
Call encoder control before running ethread test.
The first value of video->frame() is 15 because of the source range used.
Change-Id: I219c287b500fa376160d6dcfb937092e577ec959
Deb Mukherjee [Thu, 5 Mar 2015 21:58:37 +0000 (13:58 -0800)]
Reduce default overshoot/undershoot params to 25
Reducing these values from 100 makes rate control tighter by
default.
Change-Id: I979409c93e6f19e128898f08ad581bf67eb0f824
Frank Galligan [Thu, 5 Mar 2015 21:58:26 +0000 (13:58 -0800)]
Merge "Use 8 threads by default for VP9 encodes"
Frank Galligan [Thu, 5 Mar 2015 21:58:21 +0000 (13:58 -0800)]
Merge "VP9: turn on tile-columns and frame-parallel-mode by default"
Alex Converse [Thu, 5 Mar 2015 21:54:44 +0000 (13:54 -0800)]
Merge "Don't inline cost_coeffs."
Adrian Grange [Thu, 5 Mar 2015 20:52:57 +0000 (12:52 -0800)]
Merge "Fix valgrind memcpy memory overlaps warning"
Alex Converse [Thu, 5 Mar 2015 20:39:02 +0000 (12:39 -0800)]
Don't inline cost_coeffs.
It was tiny when it was orginally marked INLINE. Forcing this function
to be inlined prevents the compiler from inlining its much smaller
callers.
No measurable speed impact, 28320 byte smaller libvpx.a
Change-Id: I6bf4c917157d15cbadb3cd3e20a9e82d35dc7d6f
Alex Converse [Thu, 5 Mar 2015 20:09:03 +0000 (12:09 -0800)]
Fix misleading indentation.
Change-Id: Ic82b039a3d42f9aa01b85a3a69facfaa84b43a53
Alex Converse [Thu, 5 Mar 2015 20:09:48 +0000 (12:09 -0800)]
Don't copy thread data for the main thread.
Change-Id: I6adee6704cacfeae0ed0b217a91095457d1be74a
Jingning Han [Thu, 5 Mar 2015 19:43:01 +0000 (11:43 -0800)]
Move pred_mv assign outside integral projection motion search
Change-Id: I040b066fdce08e2f05115a22ea808715aa147779
Jingning Han [Thu, 5 Mar 2015 17:25:16 +0000 (09:25 -0800)]
Merge "Move integral projection motion search to vp9_mcomp.c"
Yaowu Xu [Thu, 5 Mar 2015 16:20:35 +0000 (08:20 -0800)]
Use correct bsize for uv
Change-Id: I9c897d32af6c3a956bb6f424a74c12737727038a
Johann [Wed, 4 Mar 2015 23:34:55 +0000 (15:34 -0800)]
Declare function used by 'once' with 'void' parameters
Visual Studio is exceptionally picky about this:
vp9_reconintra.c(900): warning C4113: 'void (__cdecl *)()' differs in
parameter lists from 'void (__cdecl *)(void)'
[.build-x86_64-win64-vs10\vpx.vcxproj]
Change-Id: I564c7415f4608fd962be8c699d6133a996b545f7
hkuang [Wed, 4 Mar 2015 22:23:01 +0000 (14:23 -0800)]
Merge "Fix variable shadowing."
Adrian Grange [Wed, 4 Mar 2015 20:49:58 +0000 (12:49 -0800)]
Merge "Small rationalization of code in vp9_first_pass"
hkuang [Wed, 4 Mar 2015 19:40:20 +0000 (11:40 -0800)]
Fix variable shadowing.
Change-Id: I287c61ad4aa85654aef3c871a62131bcd0d891ac
hkuang [Wed, 4 Mar 2015 19:27:58 +0000 (11:27 -0800)]
Merge "Remove unnecessary loopfilter init."
Adrian Grange [Wed, 4 Mar 2015 18:54:10 +0000 (10:54 -0800)]
Merge "Make encoder buffer allocation dynamic"
Adrian Grange [Fri, 27 Feb 2015 23:52:58 +0000 (15:52 -0800)]
Small rationalization of code in vp9_first_pass
Change-Id: I87cc0e038171c60a957298827e312fead500f7fb
Jingning Han [Wed, 4 Mar 2015 18:47:56 +0000 (10:47 -0800)]
Merge "Use SAD value to set chroma cost flag"
Jingning Han [Wed, 4 Mar 2015 18:28:33 +0000 (10:28 -0800)]
Move integral projection motion search to vp9_mcomp.c
Make it a general purpose fast motion estimation function, to be
used in the mode search process.
Change-Id: Ib354cb0e664dc61c30c0b2314297835ee75b157a
Jingning Han [Wed, 4 Mar 2015 17:40:01 +0000 (09:40 -0800)]
Use SAD value to set chroma cost flag
This saves an extra 64x64 variance calculation and replaces two
32x32 variance functions with sad functions. The compression
performance change is unnoticeable.
Change-Id: I6d33868695664ec73b56c42945162ae61c484856
Jingning Han [Wed, 4 Mar 2015 17:01:33 +0000 (09:01 -0800)]
Merge "Properly handle the boundary blocks for integral projection search"
Adrian Grange [Wed, 18 Feb 2015 17:40:34 +0000 (09:40 -0800)]
Make encoder buffer allocation dynamic
Frame buffers are now allocated dynamically on-demand.
Entries in the reference frame map, cm->ref_frame_map,
may now be set to -1 (INVALID_IDX) to indicate that
there is not a valid reference buffer in that "slot".
All slots in the reference frame map are now initialized
to the empty state (-1) and each buffer is initialized
to have a reference count of 0.
Change-Id: Id1afe98de98db4ae8b2dfefed7889c3b28c68582
Deb Mukherjee [Wed, 4 Mar 2015 07:23:44 +0000 (23:23 -0800)]
Merge "dc quantizer fix for 32x32 transforms"
Jingning Han [Wed, 4 Mar 2015 03:04:34 +0000 (19:04 -0800)]
Merge "Scale the normalization factor depending on the block size"
Frank Galligan [Wed, 4 Mar 2015 01:05:17 +0000 (17:05 -0800)]
Use 8 threads by default for VP9 encodes
BUG=https://code.google.com/p/webm/issues/detail?id=964
Change-Id: I70679d0f139b8e0962f7e19eb56b34060953e9b0
Jingning Han [Mon, 2 Mar 2015 21:51:12 +0000 (13:51 -0800)]
Properly handle the boundary blocks for integral projection search
Use rectangular block size for integral projection motion estimation
if the the 64x64 block has over half block outside the frame. This
avoids the issue that the motion information of these blocks is
dominated by the extended pixels, instead of the pixels of interest.
Change-Id: I22f4d2bb7f6a20db9b3f5e2e5463a7f4b9d1b737
Deb Mukherjee [Tue, 3 Mar 2015 20:26:41 +0000 (12:26 -0800)]
dc quantizer fix for 32x32 transforms
The rounding factor needs to be scaled down by a factor of 2.
Also, the quantized and dequantized coefficients are memset to 0
when dc quantizer is used.
Change-Id: Ifa68bab02addbf1b83d249c5b4cbd5cda796b1cf
Yunqing Wang [Tue, 3 Mar 2015 23:47:06 +0000 (15:47 -0800)]
Merge "fix a race condition caused by intra function pointer initialization"
Yaowu Xu [Tue, 3 Mar 2015 23:33:55 +0000 (15:33 -0800)]
Merge "Adapt color sensitiviy threshold to luma signal energy"
Adrian Grange [Tue, 3 Mar 2015 17:19:54 +0000 (09:19 -0800)]
Fix valgrind memcpy memory overlaps warning
Change-Id: Id0bb162b48b891c5c849f0411ef2ac0aa4bbe261
hkuang [Tue, 3 Mar 2015 20:57:26 +0000 (12:57 -0800)]
Fix a tsan error bug in frame parallel decode.
A frame may be waiting for an out of border pixel from another
frame. A frame's row progress variable is set to -1 when start being decoded
and another frame may be waiting for -2 row pixel from this frame.
In this case, vp9_frameworker_wait will return directly and skip the waiting
which leads to tsan error between threads.
Change-Id: Id16604915fb598b823e34393f696e3aa46fb6422
Jingning Han [Mon, 2 Mar 2015 18:28:12 +0000 (10:28 -0800)]
Scale the normalization factor depending on the block size
Change-Id: I0a26994bf65ea224e496b09af2ce71e1a4210433
Frank Galligan [Tue, 3 Mar 2015 19:20:11 +0000 (11:20 -0800)]
VP9: turn on tile-columns and frame-parallel-mode by default
Most of the current decoders use tile-based multithreading. Also
most of the current decoders need frame_parallel_decoding_mode
turned on to enable multithreaded decoding. tile-columns is
limited by resolution, so setting to max (6) is fine.
BUG=https://code.google.com/p/webm/issues/detail?id=963
Change-Id: I6e7ac3485d96bf0c69e06706cbb326dd38be0020
Yaowu Xu [Mon, 2 Mar 2015 23:35:58 +0000 (15:35 -0800)]
Adapt color sensitiviy threshold to luma signal energy
Instead using only a fixed threshold, this commit adapts the threshold
for color sensitivity decision to luma signal energy: chroma channel's
sse is at least 1/6 of that in luma for color sensitivity flag to be
set to active.
This recoups a large portion of the speed loss due to accounting for
chroma component costs in RTC mode decision.
Change-Id: Ie01f747f6037dba6a1d1ed3e10b71a0ef1abc42c
hkuang [Fri, 13 Feb 2015 19:49:26 +0000 (11:49 -0800)]
Remove unnecessary loopfilter init.
Loopfilters are init in vp9_decode_frame.
Change-Id: I4fbf6286b9b231451452e4ef3c19877a7b9a6768
Yunqing Wang [Tue, 3 Mar 2015 00:19:23 +0000 (16:19 -0800)]
fix a race condition caused by intra function pointer initialization
This patch fixed webm issue 962.
(https://code.google.com/p/webm/issues/detail?id=962)
The data races occurred when an encoder and a decoder were created
at the same time, and the function pointers were initialized twice.
Change-Id: I8851b753c4b4ad4767d6eea781b61f0ac9abb44b
Johann [Tue, 3 Mar 2015 17:20:02 +0000 (09:20 -0800)]
Merge "libyuv: update to r1305"
James Zern [Fri, 27 Feb 2015 04:31:59 +0000 (20:31 -0800)]
ResizeCspTest: request PSNR packets
without VPX_CODEC_USE_PSNR they're only generated by default with
--enable-internal-stats
Change-Id: I9a5a8874a3aa4bde39ae09a4101ed5616c83c9a1
Johann [Mon, 2 Mar 2015 23:19:19 +0000 (15:19 -0800)]
libyuv: update to r1305
MIPS build fixes
https://code.google.com/p/webm/issues/detail?id=957
Change-Id: I9d53900af36d783c369b5dff27a7479cb94fd16b
Jingning Han [Fri, 27 Feb 2015 21:35:22 +0000 (13:35 -0800)]
Use variance metric for integral projection vector match
This commit replaces the SAD with variance as metric for the
integral projection vector match. It improves the search accuracy
in the presence of slight light change. The average speed -6
compression performance for rtc set is improved by 1.7%. No speed
changes are observed for the test clips.
Change-Id: I71c1d27e42de2aa429fb3564e6549bba1c7d6d4d
Jingning Han [Sat, 28 Feb 2015 02:19:18 +0000 (18:19 -0800)]
Merge "Fix source frame border extension"
Jingning Han [Fri, 27 Feb 2015 23:37:18 +0000 (15:37 -0800)]
Fix source frame border extension
This commit fixes an issue in source frame border extension. It
causes certain frame resolution such as 640x480 to have a portion
of the right/bottom extension filled by zeros, which misleads
motion search and degrades transform coding performance when large
block size is used.
This fix improves the speed 2 compression performance of a few
yt sequence, typically ranging from 1% - 2%, up to 5% at median
to low bit-rate.
Change-Id: Id6b09a5695d9e7651c6dfbc2c6a72288b08af7fb
Adrian Grange [Fri, 27 Feb 2015 23:42:08 +0000 (15:42 -0800)]
Merge "Fix calc_highbd_psnr"
Alex Converse [Fri, 27 Feb 2015 22:37:48 +0000 (14:37 -0800)]
Merge "Make SVC compatible with external resize."
Adrian Grange [Fri, 27 Feb 2015 22:02:49 +0000 (14:02 -0800)]
Fix calc_highbd_psnr
Should use the crop dimensions of the frame rather
than the extended size.
Change-Id: I49ed041a46ff0753d43e074020857b7ff2f95e17
Marco [Fri, 27 Feb 2015 19:53:57 +0000 (11:53 -0800)]
Merge "Fix arithmetic overflow warnings."
James Zern [Fri, 27 Feb 2015 18:59:59 +0000 (10:59 -0800)]
Merge "use LC_ALL=C to sort libvpx_*srcs.txt"
Jingning Han [Fri, 27 Feb 2015 17:49:30 +0000 (09:49 -0800)]
Merge "Refactor integral projection based motion estimation"
Jingning Han [Fri, 27 Feb 2015 17:49:10 +0000 (09:49 -0800)]
Merge "Fix high bit-depth loop-filter sse2 compiling issue - part 4"
Jingning Han [Fri, 27 Feb 2015 17:49:00 +0000 (09:49 -0800)]
Merge "Fix high bit-depth loop-filter sse2 compiling issue - part 3"
Jingning Han [Fri, 27 Feb 2015 17:48:51 +0000 (09:48 -0800)]
Merge "Fix high bit-depth loop-filter sse2 compiling issue - part 2"
Jingning Han [Fri, 27 Feb 2015 17:48:39 +0000 (09:48 -0800)]
Merge "Fix high bit-depth loop-filter sse2 compiling issue - part 1"
James Zern [Fri, 27 Feb 2015 07:14:54 +0000 (23:14 -0800)]
test-data.mk: fix perf test data dependency
both the encode and decode perf tests require niklas_1280_720_30.yuv
broken since:
28eebf3 Merge "tests: add a shorter 720p test clip"
7839d03 tests: add a shorter 720p test clip
Change-Id: I51ebbf7261832e25d8f2c1da5c7df5c2e47f748e
James Zern [Fri, 27 Feb 2015 04:48:40 +0000 (20:48 -0800)]
use LC_ALL=C to sort libvpx_*srcs.txt
Change-Id: I387da141ebade4fc4d2f3c0a2b6aa5aaea091c0c
James Zern [Fri, 27 Feb 2015 02:30:24 +0000 (18:30 -0800)]
tools_common.sh: use $$ in VPX_TEST_OUTPUT_DIR
a bit simpler than invoking awk for rand()
Change-Id: I36ac474708f7bf0157ae59b882c2a9f69b0aaf41
James Zern [Thu, 26 Feb 2015 23:54:41 +0000 (15:54 -0800)]
Merge "tools_common.sh: add directory name to error output"
Marco [Thu, 26 Feb 2015 22:27:16 +0000 (14:27 -0800)]
Fix arithmetic overflow warnings.
Change-Id: Ib85b5bc135aa0907a76b8c74faafe577e27d014f
Jingning Han [Tue, 24 Feb 2015 20:43:06 +0000 (12:43 -0800)]
Fix high bit-depth loop-filter sse2 compiling issue - part 3
Change-Id: Idb14b9a285f8098126f967c5e2750221d6a58f69
Yaowu Xu [Thu, 26 Feb 2015 23:13:28 +0000 (15:13 -0800)]
Merge "Fix the encoder to support profile change"
Yaowu Xu [Thu, 26 Feb 2015 23:13:06 +0000 (15:13 -0800)]
Merge "Correct parameter order in a function call"
James Zern [Thu, 26 Feb 2015 22:51:44 +0000 (14:51 -0800)]
Merge "tests: add a shorter 720p test clip"
Jingning Han [Mon, 23 Feb 2015 22:43:06 +0000 (14:43 -0800)]
Refactor integral projection based motion estimation
Support variable block size integral projection based motion
estimation.
Change-Id: Iee6d65e44df4480aa13fb7b84b9c91914b89caa1
James Zern [Thu, 26 Feb 2015 20:57:30 +0000 (12:57 -0800)]
tools_common.sh: add directory name to error output
+ add a helper function to reduce the duplication
this is a bit clearer when the environment variable is set, but the
directory is missing
Change-Id: I08f9b56122b5741bb40a5f795f7f82f5b49f1047
Jingning Han [Tue, 24 Feb 2015 20:21:04 +0000 (12:21 -0800)]
Fix high bit-depth loop-filter sse2 compiling issue - part 2
Change-Id: I6728b69bb3dff1daa64ff7142f691e80a089f1c4
Yaowu Xu [Wed, 25 Feb 2015 23:39:09 +0000 (15:39 -0800)]
Fix the encoder to support profile change
Change-Id: Iefb928ad1174e274409facfb44f80265ff0f7683
Yaowu Xu [Thu, 26 Feb 2015 19:39:57 +0000 (11:39 -0800)]
Correct parameter order in a function call
Change-Id: Ibd87db1c4371edcbe193d39df2fdc07d3842c21a