[WATCHDOG] driver-for-ibm-automatic-server-restart-watchdog.patch

This patch adds driver for IBM Automatic Server Restart watchdog hardware
found in some IBM eServer xSeries machines.  This driver is based on the ugly
driver provided by IBM.  Driver was tested on IBM eServer 226.

Signed-off-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>

[WATCHDOG] i6300.h-removal-patch

the attached patch moves the content of drivers/char/watchdog/i6300.h
into drivers/char/watchdog/i6300.c, since it is the only file using the
defines there is no real reason to have a separate header.

Also cleaned up the comments a bit and added myself to the copyright
holders.

Signed-off-by: David Hardeman <david@2gen.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>

[WATCHDOG] i6300esb.c-2-bugs-little-cleanup.patch

In i6300esb.c watchdog card driver were 2 bugs (misused pc_match_device and
pci_dev_put wasn't called in one error case) and one little cleanup was
done (long line was converted to a shorter one with using built-in macro).

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>

[WATCHDOG] i6300esb.c-pci_dev_put+nowayout-patch

One pci_dev_put was misused (there was one case without putting
the device).
Changed nowayout according to other drivers.

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Naveen Gupta <ngupta@google.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>

[WATCHDOG] i6300esb-set_correct_reload_register_bit

This patch writes into bit 8 of the reload register to perform the
correct 'Reload Sequence' instead of writing into bit 4 of Watchdog for
Intel 6300ESB chipset.

Signed-off-by: Naveen Gupta <ngupta@google.com>
Signed-off-by: David Hardeman <david@2gen.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>

[WATCHDOG] i6300esb.c-WDT_ENABLE-bug

This patch sets the WDT_ENABLE bit of the Lock Register to enable the
watchdog and WDT_LOCK bit only if nowayout is set. The old code always
sets the WDT_LOCK bit of watchdog timer for Intel 6300ESB chipset. So, we
end up locking the watchdog instead of enabling it.

Signed-off-by: Naveen Gupta <ngupta@google.com>
Signed-off-by: David Hardeman <david@2gen.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>

[WATCHDOG] removes pci_find_device from i6300esb.c

This patch changes pci_find_device to pci_get_device
(encapsulated in for_each_pci_dev) in i6300esb watchdog
card with appropriate adding pci_dev_put.

Generated in 2.6.13-rc5-mm1 kernel version.

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

[WATCHDOG] i6300esb.patch

I wrote earlier to the list[1] asking for a driver for the watchdog
included in the 6300ESB chipset.  I got a 2.4 driver via private email
from Ross Biro which I've changed into what I hope resembles a 2.6
driver (which was done by looking a lot at the watchdog drivers
already in the 2.6 tree).

I've attached the result, and I'm hoping to get some feedback on the
coding as a first step.  I can't actually test it on the hardware
right now as I won't have physical access until April. So my own tests
have been limited to "compiles-without-warnings" and
"can-be-insmodded-in-other-machine-without-oops".

[1] http://marc.theaimsgroup.com/?l=linux-kernel&m=110711079825794&w=2
[2] http://marc.theaimsgroup.com/?l=linux-kernel&m=110711973917746&w=2

Signed-off-by: David Hardeman <david@2gen.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

[WATCHDOG] mv64x60_wdt.patch

Add mv64x60 (Marvell Discovery) watchdog support.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

[WATCHDOG] Kconfig+Makefile-clean2

Clean the Kconfig+Makefile according to a sorted list
of the drivers of each architecture (and sub-architecture).

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

[WATCHDOG] s3c2410_wdt.c-state_warning.patch

I've noticed that the patch from Ben Dooks (commit
af4bb822bc65efb087cd36b83789f22161a6515b on your git tree) is
introducing a warning. It's using 'u32 state' instead of 'pm_message_t
state'. I've attached a one liner to fix it.

Signed-Off-By: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

[PATCH] md: fix BUG when raid10 rebuilds without enough drives

This shouldn't be a BUG.  We should cope.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fix raid10 assembly when too many devices are missing

If you try to assemble an array with too many missing devices, raid10 will now
reject the attempt, instead of allowing it.

Also check when hot-adding a drive and refuse the hot-add if the array is
beyond hope.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: really get sb_size setting right in all cases

There was another case where sb_size wasn't being set, so instead do the
sensible thing and set if when filling in the content of a superblock.  That
ensures that whenever we write a superblock, the sb_size MUST be set.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: make sure the new 'sb_size' is set properly device added without pre-existing superblock.

There are two ways to add devices to an md/raid array.

  It can have superblock written to it, and then given to the md driver,
  which will read the superblock (the new way)

or

  md can be told (through SET_ARRAY_INFO) the shape of the array, and
  the told about individual drives, and md will create the required
  superblock (the old way).

The newly introduced sb_size was only set for drives being added the
new way, not the old ways.  Oops :-(

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: report spare drives in /proc/mdstat

Just like failed drives have (F), so spare drives now have (S).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: add information about superblock version to /proc/mdstat

Leave it unchanged if the original (0.90) is used, incase it might be a
compatability problem.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: use queue_hardsect_size instead of block_size for md superblock size calc.

Doh.  I want the physical hard-sector-size, not the current block size...

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: choose better default offset for bitmap.

On reflection, a better default location for hot-adding bitmaps with version-1
superblocks is immediately after the superblock.  There might not be much room
there, but there is usually atleast 3k, and that is a good start.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: tidy up daemon stop/start code in md/bitmap.c

The bitmap code used to have two daemons, so there is some 'common' start/stop
code.  But now there is only one, so the common code is just noise.

This patch tidies this up somewhat.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: ensure bitmap_writeback_daemon handles shutdown properly.

mddev->bitmap gets clearred before the writeback daemon is stopped.  So the
write_back daemon needs to be careful not to dereference the 'bitmap' if it is
NULL.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: use kthread infrastructure in md

Switch MD to use the kthread infrastructure, to simplify the code and get rid
of tasklist_lock abuse in md_unregister_thread.

Also don't flush signals in md_thread, as the called thread will always do
that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: write-intent bitmap support for raid6

This is a direct port of the raid5 patch.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: add write-intent-bitmap support to raid5

Most awkward part of this is delaying write requests until bitmap updates have
been flushed.

To achieve this, we have a sequence number (seq_flush) which is incremented
each time the raid5 is unplugged.

If the raid thread notices that this has changed, it flushes bitmap changes,
and assigned the value of seq_flush to seq_write.

When a write request arrives, it is given the number from seq_write, and that
write request may not complete until seq_flush is larger than the saved seq
number.

We have a new queue for storing stripes which are waiting for a bitmap flush
and an extra flag for stripes to record if the write was 'degraded' and so
should not clear the a bit in the bitmap.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: limit size of sb read/written to appropriate amount

version-1 superblocks are not (normally) 4K long, and can be of variable size.
 Writing the full 4K can cause corruption (but only in non-default
configurations).

With this patch the super-block-flavour can choose a size to read, and set a
size to write based on what it finds.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: remove old cruft from md_k.h header file

These inlines haven't been used for ages, they should go.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fix bitmap/read_sb_page so that it handles errors properly.

read_sb_page() assumed that if sync_page_io fails, the device would be marked
faultly.  However it isn't.  So in the face of error, read_sb_page would loop
forever.

Redo the logic so that this cannot happen.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: allow md to load a superblock with feature-bit '1' set

As this is used to flag an internal bitmap.

Also, introduce symbolic names for feature bits.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: allow hot-adding devices to arrays with non-persistant superblocks.

It is possibly (and occasionally useful) to have a raid1 without persistent
superblocks.  The code in add_new_disk for adding a device to such an array
always tries to read a superblock.

This will obviously fail.

So do the appropriate test and call md_import_device with
appropriate args.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: do not set mddev->bitmap until bitmap is fully initialised

When hot-adding a bitmap, bitmap_daemon_work could get called while the bitmap
is being created, so don't set mddev->bitmap until the bitmap is ready.

This requires freeing the bitmap inside bitmap_create if creation failed
part-way through.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: make sure bitmap_daemon_work actually does work.

The 'lastrun' time wasn't being initialised, so it could be half a
jiffie-cycle before it seemed to be time to do work again.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: raid1_quiesce is back to front, fix it.

A state of 0 mean 'not quiesced'
A state of 1 means 'is quiesced'

The original code got this wrong.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: support md/linear array with components greater than 2 terabytes.

linear currently uses division by the size of the smallest componenet device
to find which device a request goes to.  If that smallest device is larger
than 2 terabytes, then the division will not work on some systems.

So we introduce a pre-shift, and take care not to make the hash table too
large, much like the code in raid0.

Also get rid of conf->nr_zones, which is not needed.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: add write-behind support for md/raid1

If a device is flagged 'WriteMostly' and the array has a bitmap, and the
bitmap superblock indicates that write_behind is allowed, then write_behind is
enabled for WriteMostly devices.

Write requests will be acknowledges as complete to the caller (via b_end_io)
when all non-WriteMostly devices have completed the write, but will not be
cleared from the bitmap until all devices complete.

This requires memory allocation to make a local copy of the data being
written.  If there is insufficient memory, then we fall-back on normal write
semantics.

Signed-Off-By: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: support write-mostly device in raid1

This allows a device in a raid1 to be marked as "write mostly".  Read requests
will only be sent if there is no other option.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: all hot-add and hot-remove of md intent logging bitmaps

Both file-bitmaps and superblock bitmaps are supported.

If you add a bitmap file on the array device, you lose.

This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used
for adding a superblock bitmap doesn't have room for giving an offset.  Later,
this value will be setable via sysfs.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: improve handling of bitmap initialisation.

When we find a 'stale' bitmap, possibly because it is new, we should just
assume every bit needs to be set, but rather base the setting of bits on the
current state of the array (degraded and recovery_cp).

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: don't allow new md/bitmap file to be set if one already exists

... otherwise we loose a reference and can never free the file.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: fix rh_dec()/rh_inc() race in dm-raid1.c

Fix another bug in dm-raid1.c that the dirty region may stay in or be moved
to clean list and freed while in use.

It happens as follows:

   CPU0                                   CPU1
   ------------------------------------------------------------------------------
   rh_dec()
     if (atomic_dec_and_test(pending))
        <the region is still marked dirty>
                                          rh_inc()
                                            if the region is clean
                                               mark the region dirty
                                               and remove from clean list
        mark the region clean
        and move to clean list
                                                  atomic_inc(pending)

At this stage, the region is in clean list and will be mistakenly reclaimed
by rh_update_states() later.

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fail IO request to md that require a barrier.

md does not yet support BIO_RW_BARRIER, so be honest about it and fail
(-EOPNOTSUPP) any such requests.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fix minor error in raid10 read-balancing calculation.

'this_sector' is a virtual (array) address while 'head_position' is a physical
(device) address, so substraction doesn't make any sense.  devs[slot].addr
should be used instead of this_sector.

However, this patch doesn't make much practical different to the read
balancing due to the effects of later code.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge /pub/scm/linux/kernel/git/sam/kbuild

Remove "must_check" attributes in PCI-land

Don't just irritate all other kernel developers.  Fix the users first,
then you can re-introduce the must-check infrastructure to avoid new
cases creeping in.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Preempt-safe RCU file usage

Fix up fs/compat.c fixes.

[PATCH] Update PCI IOMEM allocation start

This fixes the problem with "Averatec 6240 pcmcia_socket0: unable to
apply power", which was due to the CardBus IOMEM register region being
allocated at an address that was actually inside the RAM window that had
been reserved for video frame-buffers in an UMA setup.

The BIOS _should_ have marked that region reserved in the e820 memory
descriptor tables, but did not.

It is fixed by rounding up the default starting address of PCI memory
allocations, so that we leave a bigger gap after the final known memory
location.  The amount of rounding depends on how big the unused memory
gap is that we can allocate IOMEM from.

Based on example code by Linus.

Acked-by: Greg KH <greg@kroah.com>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

Fix up lost patch in compat_sys_select() for new RCU files world order

Andrew lost this in patch reject resolution, and never noticed, since
the compat code isn't in use on x86.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

[PATCH] Lost sockfd_put() in routing_ioctl()

This patch adds lost sockfd_put() in 32bit compat rounting_ioctl() on
64bit platforms

Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-Off-By: Maxim Giryaev <gem@sw.ru>
Signed-off-By: Linus Torvalds <torvalds@osdl.org>

[PATCH] lost fput in 32bit ioctl on x86-64

This adds a lost fput in 32bit tiocgdev ioctl on x86-64

[ chrisw: Updated to use fget_light/fput_light ]

Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-Off-By: Maxim Giryaev <gem@sw.ru>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

kbuild: um fix so it compile with generic asm-offsets.h support

um has it own set of files for asm-offsets. So for now the
gen-asm-offset macro is just duplicated in the um Makefile.

This may well be the final solution since um is a bit special compared
to other architectures - time will tell.

Also added a dummy arch/um/kernel/asm-offsets.h file to keep kbuild happy.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

[PATCH] trivial iomem annotations in qla2xxx/qla_dbg.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] trivial __user annotations (md)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] trivial __user annotations (evdev)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] trivial __user cleanup (video1394)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] trivial __user annotations (ipmi)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] more SPIN_LOCK_UNLOCKED -> DEFINE_SPINLOCK conversions

This converts the final 20 DEFINE_SPINLOCK holdouts.  (another 580 places
are already using DEFINE_SPINLOCK).  Build tested on x86.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] timer initialization cleanup: DEFINE_TIMER

Clean up timer initialization by introducing DEFINE_TIMER a'la
DEFINE_SPINLOCK.  Build and boot-tested on x86.  A similar patch has been
been in the -RT tree for some time.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE: don't allow restarting of system calls

This patch removes ability to interrupt and restart operations while there
hasn't been any side-effect.

The reason: applications.  There are some apps it seems that generate
signals at a fast rate.  This means, that if the operation cannot make
enough progress between two signals, it will be restarted for ever.  This
bug actually manifested itself with 'krusader' trying to open a file for
writing under sshfs.  Thanks to Eduard Czimbalmos for the report.

The problem can be solved just by making open() uninterruptible, because in
this case it was the truncate operation that slowed down the progress.  But
it's better to solve this by simply not allowing interrupts at all (except
SIGKILL), because applications don't expect file operations to be
interruptible anyway.  As an added bonus the code is simplified somewhat.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE: add fsync operation for directories

This patch adds a new FSYNCDIR request, which is sent when fsync is called
on directories.  This operation is available in libfuse 2.3-pre1 or
greater.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: don't update file times

Don't change mtime/ctime/atime to local time on read/write.  Rather invalidate
file attributes, so next stat() will force a GETATTR call.  Bug reported by
Ben Grimm.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: more flexible caching

Make data caching behavior selectable on a per-open basis instead of
per-mount.  Compatibility for the old mount options 'kernel_cache' and
'direct_io' is retained in the userspace library (version 2.4.0-pre1 or
later).

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: transfer readdir data through device

This patch removes a long lasting "hack" in FUSE, which used a separate
channel (a file descriptor refering to a disk-file) to transfer directory
contents from userspace to the kernel.

The patch adds three new operations (OPENDIR, READDIR, RELEASEDIR), which
have semantics and implementation exactly maching the respective file
operations (OPEN, READ, RELEASE).

This simplifies the directory reading code.  Also disk space is not
necessary, which can be important in embedded systems.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - direct I/O

This patch adds support for the "direct_io" mount option of FUSE.

When this mount option is specified, the page cache is bypassed for
read and write operations.  This is useful for example, if the
filesystem doesn't know the size of files before reading them, or when
any kind of caching is harmful.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: stricter mount option checking

Check for the presence of all mandatory mount options.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE: tighten check for processes allowed access

This patch tightens the check for allowing processes to access non-privileged
mounts.  The rational is that the filesystem implementation can control the
behavior or get otherwise unavailable information of the filesystem user.  If
the filesystem user process has the same uid, gid, and is not suid or sgid
application, then access is safe.  Otherwise access is not allowed unless the
"allow_other" mount option is given (for which policy is controlled by the
userspace mount utility).

Thanks to everyone linux-fsdevel, especially Martin Mares who helped uncover
problems with the previous approach.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - readpages operation

This patch adds readpages support to FUSE.

With the help of the readpages() operation multiple reads are bundled
together and sent as a single request to userspace.  This can improve
reading performace.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE: add padding

Add padding to structures to make sizes the same on 32bit and 64bit archs.
Initial testing and test machine generously provided by Franco Broi.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - extended attribute operations

This patch adds the extended attribute operations to FUSE.

The following operations are added:

 o getxattr
 o setxattr
 o listxattr
 o removexattr

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - mount options

This patch adds miscellaneous mount options to the FUSE filesystem.

The following mount options are added:

 o default_permissions:  check permissions with generic_permission()
 o allow_other:          allow other users to access files
 o allow_root:           allow root to access files
 o kernel_cache:         don't invalidate page cache on open

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - file operations

This patch adds the file operations of FUSE.

The following operations are added:

 o open
 o flush
 o release
 o fsync
 o readpage
 o commit_write

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - read-write operations

This patch adds the write filesystem operations of FUSE.

The following operations are added:

 o setattr
 o symlink
 o mknod
 o mkdir
 o create
 o unlink
 o rmdir
 o rename
 o link

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - read-only operations

This patch adds the read-only filesystem operations of FUSE.

This contains the following files:

 o dir.c
    - directory, symlink and file-inode operations

The following operations are added:

 o lookup
 o getattr
 o readlink
 o follow_link
 o directory open
 o readdir
 o directory release
 o permission
 o dentry revalidate
 o statfs

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - device functions

This adds the FUSE device handling functions.

This contains the following files:

 o dev.c
    - fuse device operations (read, write, release, poll)
    - registers misc device
    - support for sending requests to userspace

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - core

This patch adds FUSE core.

This contains the following files:

 o inode.c
    - superblock operations (alloc_inode, destroy_inode, read_inode,
      clear_inode, put_super, show_options)
    - registers FUSE filesystem

 o fuse_i.h
    - private header file

Requirements
============

 The most important difference between orinary filesystems and FUSE is
 the fact, that the filesystem data/metadata is provided by a userspace
 process run with the privileges of the mount "owner" instead of the
 kernel, or some remote entity usually running with elevated
 privileges.

 The security implication of this is that a non-privileged user must
 not be able to use this capability to compromise the system.  Obvious
 requirements arising from this are:

  - mount owner should not be able to get elevated privileges with the
    help of the mounted filesystem

  - mount owner should not be able to induce undesired behavior in
    other users' or the super user's processes

  - mount owner should not get illegitimate access to information from
    other users' and the super user's processes

 These are currently ensured with the following constraints:

  1) mount is only allowed to directory or file which the mount owner
    can modify without limitation (write access + no sticky bit for
    directories)

  2) nosuid,nodev mount options are forced

  3) any process running with fsuid different from the owner is denied
     all access to the filesystem

 1) and 2) are ensured by the "fusermount" mount utility which is a
    setuid root application doing the actual mount operation.

 3) is ensured by a check in the permission() method in kernel

 I started thinking about doing 3) in a different way because Christoph
 H. made a big deal out of it, saying that FUSE is unacceptable into
 mainline in this form.

 The suggested use of private namespaces would be OK, but in their
 current form have many limitations that make their use impractical (as
 discussed in this thread).

 Suggested improvements that would address these limitations:

   - implement shared subtrees

   - allow a process to join an existing namespace (make namespaces
     first-class objects)

   - implement the namespace creation/joining in a PAM module

 With all that in place the check of owner against current->fsuid may
 be removed from the FUSE kernel module, without compromising the
 security requirements.

 Suid programs still interesting questions, since they get access even
 to the private namespace causing some information leak (exact
 order/timing of filesystem operations performed), giving some
 ptrace-like capabilities to unprivileged users.  BTW this problem is
 not strictly limited to the namespace approach, since suid programs
 setting fsuid and accessing users' files will succeed with the current
 approach too.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FUSE - MAINTAINERS, Kconfig and Makefile changes

This patch adds FUSE filesystem to MAINTAINERS, fs/Kconfig and
fs/Makefile.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Documentation/sparse snapshot URL

The URL for Documentation/sparse is wrong now that it is in git.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] VFS: update documentation

This patch brings the now out-of-date Documentation/filesystems/vfs.txt
back to life.  Thanks to Carsten Otte, Trond Myklebust, and Anton
Altaparmakov for their help on updating this documentation.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Kdump: Documentation Update

There are minor changes in command line options in kexec-tools for kdump.
This patch updates the documentation to reflect those changes.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] DocBook: fix kernel-api documentation generation

This patch changes a macro definition so that kernel-doc can understand it.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] update kfree, vfree, and vunmap kerneldoc

This patch clarifies NULL handling of kfree() and vfree().  I addition,
wording of calling context restriction for vfree() and vunmap() are changed
from "may not" to "must not."

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] docs: fix misinformation about overcommit_memory

Someone complained about the docs for vm_overcommit_memory being wrong.
This patch copies the text from the vm documentation into procfs.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ISA DMA API documentation

Documentation for how the ISA DMA controller is handled in the kernel.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Documentation: how to apply patches for various trees

Add a new document describing the major kernel trees and how to apply their
patches.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Update Documentation/DocBook/kernel-hacking.tmpl

Update the hacking guide, before CONFIG_PREEMPT_RT goes in and it needs
rewriting again.

Changes include modernization of quotes, removal of most references to
bottom halves (some mention required because we still use bh in places to
mean softirq).

It would be nice to have a discussion of sparse and various annotations.
Please send patches straight to akpm.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (authored)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s3c2410fb: Platform support for ARM S3C2410 framebuffer driver

This patch add the plateform specific stuff needed to configure and use the
driver.

Signed-Off-By: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Dooks <ben@trinity.fluff.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s3c2410fb: ARM S3C2410 framebuffer driver

This set of two patches add support for the framebuffer of the Samsung S3C2410
ARM SoC.  This driver was started about one year ago and is now used on iPAQ
h1930/h1940, Acer n30 and probably other s3c2410-based machines I'm not aware
of.  I've also heard yesterday that it's working also on iPAQ rx3715/rx3115
(s3c2440-based machines).

Signed-Off-By: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Ben Dooks <ben@trinity.fluff.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] quiet non-x86 option ROM warnings

Quiet an incorrect warning in aty128fb and radeonfb about the PCI ROM
content.  Macs work just find without that signature.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i810fb: Stop LCD displays from flickering

Stop LCD displays from flickering during high loads.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i810fb: Add i2c/DDC support

Add ddc/i2c support for i810fb.  This will allow the driver to get display
information, especially for monitors with fickle timings.  The i2c support
depends on CONFIG_FB_I810_GTF.

Changed __init* to __devinit*

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbcon: Break up bit_putcs into its component functions

The function bit_putcs() in drivers/video/console/bitblit.c is becoming large.
 Break it up into its component functions (bit_putcs_unaligned and
bit_putcs_aligned).

Incorporated fb_pad_aligned_buffer() optimization by Roman Zippel.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pxafb: Add hsync time reporting hook

To solve touchscreen interference problems devices like the Sharp Zaurus
SL-C3000 need to know the length of the horitzontal sync pulses.  This patch
adds a hook to pxafb so the touchscreen driver can function correctly.

Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Initialize var structure in calc_mode_timings

The var structure in calc_mode_timings is not properly initialized (zero set)
which leads to undefined behavior when it is passed to fb_get_mode().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nvidiafb: Fixed mirrored characters in big endian machines

nvidiafb_imageblit converts the bitdata stream from big_endian to little
endian.  This produces mirrored characters when machine is big_endian.  Do not
endian convert on big endian machines.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbcon: Stop cursor timer if console is inactive

If console is blanked or in KD_GRAPHICS mode, delete cursor timer.  No sense
flashing the cursor when there's nothing to be seen.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] savagefb: Make mode_option available when compiled as a module

Make "mode_option" available when compiled as a module.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nvidiafb: Use CVT to get mode for digital displays

If no EDID block is probed, if the display is digital and if no mode option is
specified by the user, get the timings by CVT instead of using the global mode
database.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) support

The Coordinated Video Timings (CVT) is the latest standard approved by VESA
concerning video timings generation.  It addresses the limitation of GTF which
is designed mainly for CRT displays.  CRT's have a high blanking requirement
(as much as 25% of the horizontal frame length) which artificially increases
the pixelclock.  Digital displays, on the other hand, needs to conserve the
pixelclock as much as possible.  The GTF also does not take into account the
different aspect ratios in its calculation.

The new function added is fb_find_mode_cvt().  It is called by fb_find_mode()
if it recognizes a mode option string formatted for CVT.  The format is:

<xres>x<yres>[M][R][-<bpp>][<at-sign><refresh>][i][m]

The 'M' tells the function to calculate using CVT.  On it's own, it will
compute a timing for CRT displays at 60Hz.  If the 'R' is specified, 'reduced
blanking' computation will be used, best for flatpanels.  The 'i' and the 'm'
is for 'interlaced mode' and 'with margins' respectively.

To determine if CVT was used, check for dmesg for something like this:

CVT Mode - <pix>M<n>[-R], ie: .480M3-R  (800x600 reduced blanking)

where: pix - product of xres and yres, in MB
    M   - is a CVT mode
    n   - the aspect ratio (3 - 4:3; 4 - 5:4; 9 - 16:9, 15:9; A - 16:10)
    -R   - reduced blanking

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PCI: Small rearrangement of PCI probing code

This patch makes some small rearrangements of the PCI probing code in
order to make it possible for arch code to set up the PCI tree
without needing to duplicate code from the PCI layer unnecessarily.
PPC64 will use this to set up the PCI tree from the Open Firmware
device tree, which we need to do on logically-partitioned pSeries
systems.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: Unhide SMBus on Compaq Evo N620c

Trivial patch against 2.6.13 to unhide SMBus on Compaq Evo N620c laptop using
Intel 82855PM chipset.

Signed-off-by: Rumen Zarev <rzarev@caltech.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>