Cameron Gutman [Mon, 28 Nov 2016 04:37:31 +0000 (20:37 -0800)]
Input: xpad - add product ID for Xbox One S pad
[ Upstream commit
599b8c09d974d6e4d85a8f7bc8ed7442977866a8 ]
This is the new gamepad that ships with the Xbox One S which
includes Bluetooth functionality.
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cameron Gutman [Wed, 27 Jul 2016 21:24:55 +0000 (14:24 -0700)]
Input: xpad - power off wireless 360 controllers on suspend
[ Upstream commit
f712a5a05228058f6b74635546549d4a46e117fc ]
When the USB wireless adapter is suspended, the controllers
lose their connection. This causes them to start flashing
their LED rings and searching for the wireless adapter
again, wasting the controller's battery power.
Instead, we will tell the controllers to power down when
we suspend. This mirrors the behavior of the controllers
when connected to the console itself and how the official
Xbox One wireless adapter behaves on Windows.
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cameron Gutman [Thu, 23 Jun 2016 17:24:42 +0000 (10:24 -0700)]
Input: xpad - fix oops when attaching an unknown Xbox One gamepad
[ Upstream commit
c7f1429389ec1aa25e042bb13451385fbb596f8c ]
Xbox One controllers have multiple interfaces which all have the
same class, subclass, and protocol. One of the these interfaces
has only a single endpoint. When Xpad attempts to bind to this
interface, it causes an oops when trying initialize the output URB
by trying to access the second endpoint's descriptor.
This situation was avoided for known Xbox One devices by checking
the XTYPE constant associated with the VID and PID tuple. However,
this breaks when new or previously unknown Xbox One controllers
are attached to the system.
This change addresses the problem by deriving the XTYPE for Xbox
One controllers based on the interface protocol before checking
the interface number.
Fixes:
1a48ff81b391 ("Input: xpad - add support for Xbox One controllers")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cameron Gutman [Wed, 1 Jun 2016 18:32:51 +0000 (11:32 -0700)]
Input: xpad - fix rumble on Xbox One controllers with 2015 firmware
[ Upstream commit
540c26087bfbad6ea72758b76b16ae6282a73fea ]
Xbox One controllers that shipped with or were upgraded to the 2015
firmware discard the current rumble packets we send. This patch changes
the Xbox One rumble packet to a form that both the newer and older
firmware will accept.
It is based on changes made to support newer Xbox One controllers in
the SteamOS brewmaster-4.1 kernel branch.
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Fri, 27 May 2016 23:24:40 +0000 (16:24 -0700)]
Input: xpad - xbox one elite controller support
[ Upstream commit
6f49a398b266d4895bd7e041db77a2b2ee1482a6 ]
added the according id and incresed XPAD_PKT_LEN to 64 as the elite
controller sends at least 33 byte messages [1].
Verified to be working by [2].
[1]: https://franticrain.github.io/sniffs/XboxOneSniff.html
[2]: https://github.com/paroj/xpad/issues/23
Signed-off-by: Pierre-Loup A. Griffais <eduke32@plagman.net>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Fri, 27 May 2016 23:24:20 +0000 (16:24 -0700)]
Input: xpad - add more third-party controllers
[ Upstream commit
6538c3b2d2d220a974e47928b165ea09b9cfa6b4 ]
Signed-off-by: Pierre-Loup A. Griffais <eduke32@plagman.net>
Signed-off-by: Thomas Debesse <dev@illwieckz.net>
Signed-off-by: aronschatz <aronschatz@aselabs.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cameron Gutman [Fri, 27 May 2016 23:23:50 +0000 (16:23 -0700)]
Input: xpad - prevent spurious input from wired Xbox 360 controllers
[ Upstream commit
1ff5fa3c6732f08e01ae12f12286d4728c9e4d86 ]
After initially connecting a wired Xbox 360 controller or sending it
a command to change LEDs, a status/response packet is interpreted as
controller input. This causes the state of buttons represented in
byte 2 of the controller data packet to be incorrect until the next
valid input packet. Wireless Xbox 360 controllers are not affected.
Writing a new value to the LED device while holding the Start button
and running jstest is sufficient to reproduce this bug. An event will
come through with the Start button released.
Xboxdrv also won't attempt to read controller input from a packet
where byte 0 is non-zero. It also checks that byte 1 is 0x14, but
that value differs between wired and wireless controllers and this
code is shared by both. I think just checking byte 0 is enough to
eliminate unwanted packets.
The following are some examples of 3-byte status packets I saw:
01 03 02
02 03 00
03 03 03
08 03 00
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Fri, 27 May 2016 23:22:25 +0000 (16:22 -0700)]
Input: xpad - move pending clear to the correct location
[ Upstream commit
4efc6939a83c54fb3417541be48991afd0290ba3 ]
otherwise we lose ff commands: https://github.com/paroj/xpad/issues/27
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Silvan Jegen [Fri, 18 Mar 2016 00:15:01 +0000 (17:15 -0700)]
Input: xpad - add Mad Catz FightStick TE 2 VID/PID
[ Upstream commit
d63b0f0c0f19dc8687387ead5a28148dcad1a4b9 ]
This adds the VID/PID combination for the Xbox One version of the Mad
Catz FightStick TE 2.
The functionality that this provides is about on par with what the
Windows drivers for the stick manage to deliver.
What works:
- Digital stick
- 6 main buttons
- Xbox button
- The two buttons on the back
- The locking buttons (preventing accidental Xbox button press)
What doesn't work:
- Two of the main buttons (don't work on Windows either)
- The "Haptic" button setting does not have an effect (not sure if it
works on Windows)
I added the MAP_TRIGGERS_TO_BUTTONS option but in my (limited) testing
there was no practical difference with or without. The FightStick does
not have triggers though so adding it makes sense.
Signed-off-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Wed, 27 Jan 2016 23:42:25 +0000 (15:42 -0800)]
Input: xpad - remove unused function
[ Upstream commit
a6ed4a18ba6a6f5a01e024b9d221d6439bf6ca4c ]
There are two definitions of xpad_identify_controller(), one is used
when CONFIG_JOYSTICK_XPAD_LEDS is set, but the other one is empty
and never used, and we get a gcc warning about it:
drivers/input/joystick/xpad.c:1210:13: warning: 'xpad_identify_controller' defined but not used [-Wunused-function]
This removes the second definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
cae705baa40b ("Input: xpad - re-send LED command on present event")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Tue, 12 Jan 2016 22:35:51 +0000 (14:35 -0800)]
Input: xpad - correct xbox one pad device name
[ Upstream commit
95162dc8493ed92e5f7dcc8874e58c2ba3836b43 ]
Apparently the Covert Forces ID is not Covert Forces pad exclusive, but
rather denotes a new firmware version that can be found on all new
controllers and can be also updated on old hardware using Windows 10.
see: https://github.com/paroj/xpad/issues/19
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Wed, 16 Dec 2015 22:24:58 +0000 (14:24 -0800)]
Input: xpad - use LED API when identifying wireless controllers
[ Upstream commit
d9be398afb2c3333716324352d062c50112e4e86 ]
When lighting up the segment identifying wireless controller, Instead of
sending command directly to the controller, let's do it via LED API (usinf
led_set_brightness) so that LED object state is in sync with controller
state and we'll light up the correct segment on resume as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Wed, 9 Dec 2015 21:30:34 +0000 (13:30 -0800)]
Input: xpad - workaround dead irq_out after suspend/ resume
[ Upstream commit
4220f7db1e424f2a086ad41217b5770cc9f003a9 ]
The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also
reproduced by Zachary Lund [0]) Work around this by implementing
suspend, resume, and reset_resume callbacks and properly shutting down
URBs on suspend and restarting them on resume.
[0]: https://github.com/paroj/xpad/issues/6
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Loup A. Griffais [Wed, 9 Dec 2015 21:40:37 +0000 (13:40 -0800)]
Input: xpad - update Xbox One Force Feedback Support
[ Upstream commit
2a6d7527b35cf987260800807e328d167aef22ac ]
There's apparently a serial number woven into both input and output
packets; neglecting to specify a valid serial number causes the controller
to ignore the rumble packets.
The scale of the rumble was also apparently halved in the packets.
The initialization packet had to be changed to allow force feedback to
work.
see https://github.com/paroj/xpad/issues/7 for details.
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Wed, 9 Dec 2015 19:57:01 +0000 (11:57 -0800)]
Input: xpad - correctly handle concurrent LED and FF requests
[ Upstream commit
7fc595f4c02636eadaeeecfe7bbc45b57c173004 ]
Track the status of the irq_out URB to prevent submission iof new requests
while current one is active. Failure to do so results in the "URB submitted
while active" warning/stack trace.
Store pending brightness and FF effect in the driver structure and replace
it with the latest requests until the device is ready to process next
request. Alternate serving LED vs FF requests to make sure one does not
starve another. See [1] for discussion. Inspired by patch of Sarah Bessmer
[2].
[1]: http://www.spinics.net/lists/linux-input/msg40708.html
[2]: http://www.spinics.net/lists/linux-input/msg31450.html
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Loup A. Griffais [Wed, 9 Dec 2015 19:46:25 +0000 (11:46 -0800)]
Input: xpad - handle "present" and "gone" correctly
[ Upstream commit
09c8b00ae3e16c8d0fd4beb2ca064502a76c0f17 ]
Handle the "a new device is present" message properly by dynamically
creating the input device at this point in time. This means we now do not
"preallocate" all 4 devices when a single wireless base station is seen.
This requires a workqueue as we are in interrupt context when we learn
about this.
Also properly disconnect any devices that we are told are removed.
Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clement Calmels [Sun, 13 Dec 2015 05:20:11 +0000 (21:20 -0800)]
Input: xpad - remove spurious events of wireless xpad 360 controller
[ Upstream commit
93a017aa2f77291752e637bfd83f2459dba714cb ]
When powering up a wireless xbox 360 controller, some wrong joystick
events are generated. It is annoying because, for example, it makes
unwanted moves in Steam big picture mode's menu.
When my controller is powering up, this packet is received by the
driver:
00000000: 00 0f 00 f0 00 cc ff cf 8b e0 86 6a 68 f0 00 20 ...........jh..
00000010: 13 e3 20 1d 30 03 40 01 50 01 ff ff .. .0.@.P...
According to xboxdrv userspace driver source code, this packet is only
dumping a serial id and should not be interpreted as joystick events.
This issue can be easily seen with jstest:
$ jstest --event /dev/input/js0
This patch only adds a way to filter out this "serial" packet and as a
result it removes the spurous events.
Signed-off-by: Clement Calmels <clement.calmels@free.fr>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Mon, 19 Oct 2015 07:06:58 +0000 (00:06 -0700)]
Input: xpad - fix clash of presence handling with LED setting
[ Upstream commit
fbe6a3114471cccaeaeabfa56937731503ece545 ]
Do not call xpad_identify_controller at init with wireless devices: it
conflicts with the already sent presence packet and will be called by
xpad360w_process_packet as needed anyway.
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Sat, 10 Oct 2015 16:36:17 +0000 (09:36 -0700)]
Input: xpad - query wireless controller state at init
[ Upstream commit
aba54876bb38dde81abead1ed1936eb04fa30ca9 ]
When we initialize the driver/device, we really don't know how many
controllers are connected. So send a "query presence" command to the
base-station. (Command discovered by Zachary Lund)
Presence packet taken from:
https://github.com/computerquip/xpad5
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Loup A. Griffais [Sat, 10 Oct 2015 16:34:17 +0000 (09:34 -0700)]
Input: xpad - move the input device creation to a new function
[ Upstream commit
b8154002cbdfde1aed2f86bd27f5e2c7e832cabb ]
To allow us to later create / destroy the input device from the urb
callback, we need to initialize/ deinitialize the input device from a
separate function. So pull that logic out now to make later patches
more "obvious" as to what they do.
Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Sat, 10 Oct 2015 16:33:52 +0000 (09:33 -0700)]
Input: xpad - x360w: report dpad as buttons and axes
[ Upstream commit
5ee8bda943de20017636845a5c8d7069a4a283b8 ]
as discussed here[0], x360w is the only pad that maps dpad_to_button.
This is bad for downstream developers as they have to differ between
x360 and x360w which is not intuitive.
This patch implements the suggested solution of exposing the dpad both
as axes and as buttons. This retains backward compatibility with software
already dealing with the difference while makes new software work as
expected across x360/ x360w pads.
[0] http://www.spinics.net/lists/linux-input/msg34421.html
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Sat, 10 Oct 2015 16:32:55 +0000 (09:32 -0700)]
Input: xpad - factor out URB submission in xpad_play_effect
[ Upstream commit
060081529c64cfa9baa2748a4b949159e700da0d ]
Move submission logic to a single point at the end of the function.
This makes it easy to add locking/ queuing code later on.
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Wed, 7 Oct 2015 00:07:31 +0000 (17:07 -0700)]
Input: xpad - remove needless bulk out URB used for LED setup
[ Upstream commit
a306a65f46acb040d208523592a2d34f67d47a61 ]
This code was probably wrong ever since and is redundant with
xpad_send_led_command. Both try to send a similar command to the xbox360
controller. However xpad_send_led_command correctly uses the pad_nr instead
of bInterfaceNumber to select the led and re-uses the irq_out URB instead
of creating a new one.
Note that this change only affects the two supported wireless controllers.
Tested using the xbox360 wireless controller (PC).
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Sat, 10 Oct 2015 17:00:49 +0000 (10:00 -0700)]
Input: xpad - use ida() for finding the pad_nr
[ Upstream commit
e3b651745a03810efffd7ebf2a9b5be65fb70ec3 ]
The pad_nr corresponds to the lit up LED on the controller. Therefore there
should be no gaps when enumerating. Currently a LED is only re-assigned
after a controller is re-connected 4 times.
This patch uses ida to track connected pads - this way we can re-assign
freed up pad number immediately.
Consider the following case:
1. pad A is connected and gets pad_nr = 0
2. pad B is connected and gets pad_nr = 1
3. pad A is disconnected
4. pad A is connected again
using ida_simple_get() controller A now correctly gets pad_nr = 0 again.
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Wed, 7 Oct 2015 00:06:16 +0000 (17:06 -0700)]
Input: xpad - clarify LED enumeration
[ Upstream commit
1f6f02b728eef0d937d5138ae60dbf8fbd045f3e ]
Rename led_no -> pad_nr: the number stored there is not the LED number - it
gets translated later on to a LED number in xpad_identify_controller;
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dario Scarpa [Wed, 7 Oct 2015 00:04:36 +0000 (17:04 -0700)]
Input: xpad - fix Razer Atrox Arcade Stick button mapping
[ Upstream commit
470446ecef213b17b2c01df9879102948d77f999 ]
The "Razer Atrox Arcade Stick" features 10 buttons, and two of them (LT/RT)
don't work properly. Change its definition in xpad_device[] (mapping
field) to fix.
Signed-off-by: Dario Scarpa <dario.scarpa@duskzone.it>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Erik Lundgren [Wed, 7 Oct 2015 00:04:11 +0000 (17:04 -0700)]
Input: xpad - add Covert Forces edition of the Xbox One controller
[ Upstream commit
39a7a88872df98f0c3c50fe278fd1a1f597afd95 ]
It is identical to the Xbox One controller but has a different product ID.
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Rojtberg [Mon, 22 Jun 2015 21:11:30 +0000 (14:11 -0700)]
Input: xpad - re-send LED command on present event
[ Upstream commit
cae705baa40b2c20de8f9bb79ef4bcc6b2418c7c ]
The controller only receives commands when its present. So for the
correct LED to be lit the LED command has to be sent on the present
event.
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Loup A. Griffais [Mon, 22 Jun 2015 21:10:36 +0000 (14:10 -0700)]
Input: xpad - set the LEDs properly on XBox Wireless controllers
[ Upstream commit
75b7f05d2798ee3a1cc5bbdd54acd0e318a80396 ]
Based on Patch by Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>:
Add the logic to set the LEDs on XBox Wireless controllers. Command
sequence found by sniffing the Windows data stream when plugging the
device in.
Updated based on comments on linux-input:
unify codepaths in xpad_send_led_command for wired/ wireless controller.
Also document command values for clarification.
All values tested on Xbox 360 Wireless Controller.
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming-ting Yao Wei [Tue, 14 Apr 2015 23:59:11 +0000 (16:59 -0700)]
Input: xpad - add rumble support for Xbox One controller
[ Upstream commit
0604949ce3b9a59cff419daf706272620a9a0df0 ]
This adds rumble support for Xbox One controller by sending continuous
rumble command. Trigger button rumbling is not yet implemented.
Signed-off-by: Ming-ting Yao Wei <mwei@lxde.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aniroop Mathur [Wed, 3 Dec 2014 22:27:42 +0000 (14:27 -0800)]
Input: initialize device counter variables with -1
[ Upstream commit
939ffb1712890ee22146d2dfc24adbc7da6afa84 ]
Let's initialize atomic_t variables keeping track of number of various
devices created so far with -1 in order to avoid extra subtraction
operation.
Signed-off-by: Aniroop Mathur <aniroop.mathur@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Hackmann [Tue, 27 Nov 2018 19:15:20 +0000 (11:15 -0800)]
arm64: remove no-op -p linker flag
(commit
1a381d4a0a9a0f999a13faaba22bf6b3fc80dcb9 upstream)
Linking the ARM64 defconfig kernel with LLVM lld fails with the error:
ld.lld: error: unknown argument: -p
Makefile:1015: recipe for target 'vmlinux' failed
Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.
After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM. binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored. A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".
Since this flag is a no-op on ARM64, we can safely drop it.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yufen Yu [Fri, 16 Nov 2018 23:08:39 +0000 (15:08 -0800)]
tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
[ Upstream commit
1a413646931cb14442065cfc17561e50f5b5bb44 ]
Other filesystems such as ext4, f2fs and ubifs all return ENXIO when
lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset.
man 2 lseek says
: EINVAL whence is not valid. Or: the resulting file offset would be
: negative, or beyond the end of a seekable device.
:
: ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond
: the end of the file.
Make tmpfs return ENXIO under these circumstances as well. After this,
tmpfs also passes xfstests's generic/448.
[akpm@linux-foundation.org: rewrite changelog]
Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Satheesh Rajendran [Thu, 8 Nov 2018 05:17:56 +0000 (10:47 +0530)]
powerpc/numa: Suppress "VPHN is not supported" messages
[ Upstream commit
437ccdc8ce629470babdda1a7086e2f477048cbd ]
When VPHN function is not supported and during cpu hotplug event,
kernel prints message 'VPHN function not supported. Disabling
polling...'. Currently it prints on every hotplug event, it floods
dmesg when a KVM guest tries to hotplug huge number of vcpus, let's
just print once and suppress further kernel prints.
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Prarit Bhargava [Thu, 20 Sep 2018 12:59:14 +0000 (08:59 -0400)]
kdb: Use strscpy with destination buffer size
[ Upstream commit
c2b94c72d93d0929f48157eef128c4f9d2e603ce ]
gcc 8.1.0 warns with:
kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’:
kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
strncpy(prefix_name, name, strlen(name)+1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/debug/kdb/kdb_support.c:239:31: note: length computed here
Use strscpy() with the destination buffer size, and use ellipses when
displaying truncated symbols.
v2: Use strscpy()
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Mon, 12 Nov 2018 21:06:51 +0000 (16:06 -0500)]
SUNRPC: Fix a bogus get/put in generic_key_to_expire()
[ Upstream commit
e3d5e573a54dabdc0f9f3cb039d799323372b251 ]
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anson Huang [Mon, 5 Nov 2018 00:59:28 +0000 (00:59 +0000)]
cpufreq: imx6q: add return value check for voltage scale
[ Upstream commit
6ef28a04d1ccf718eee069b72132ce4aa1e52ab9 ]
Add return value check for voltage scale when ARM clock
rate change fail.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Kleine-Budde [Wed, 31 Oct 2018 13:15:13 +0000 (14:15 +0100)]
can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb
commit
7da11ba5c5066dadc2e96835a6233d56d7b7764a upstream.
Prior to echoing a successfully transmitted CAN frame (by calling
can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling
can_put_echo_skb() in the transmit function). These put and get function
take an index as parameter, which is used to identify the CAN frame.
A driver calling can_get_echo_skb() with a index not pointing to a skb
is a BUG, so add an appropriate error message.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Kleine-Budde [Wed, 31 Oct 2018 13:05:26 +0000 (14:05 +0100)]
can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb is accessed out of bounds
commit
e7a6994d043a1e31d5b17706a22ce33d2a3e4cdc upstream.
If the "struct can_priv::echo_skb" is accessed out of bounds would lead
to a kernel crash. Better print a sensible warning message instead and
try to recover.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Kleine-Budde [Wed, 31 Oct 2018 10:08:21 +0000 (11:08 +0100)]
can: dev: __can_get_echo_skb(): replace struct can_frame by canfd_frame to access frame length
commit
200f5c49f7a2cd694436bfc6cb0662b794c96736 upstream.
This patch replaces the use of "struct can_frame::can_dlc" by "struct
canfd_frame::len" to access the frame's length. As it is ensured that
both structures have a compatible memory layout for this member this is
no functional change. Futher, this compatibility is documented in a
comment.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Kleine-Budde [Wed, 31 Oct 2018 09:37:46 +0000 (10:37 +0100)]
can: dev: can_get_echo_skb(): factor out non sending code to __can_get_echo_skb()
commit
a4310fa2f24687888ce80fdb0e88583561a23700 upstream.
This patch factors out all non sending parts of can_get_echo_skb() into
a seperate function __can_get_echo_skb(), so that it can be re-used in
an upcoming patch.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Y.C. Chen [Wed, 3 Oct 2018 06:57:47 +0000 (14:57 +0800)]
drm/ast: change resolution may cause screen blurred
commit
1a37bd823891568f8721989aed0615835632d81a upstream.
The value of pitches is not correct while calling mode_set.
The issue we found so far on following system:
- Debian8 with XFCE Desktop
- Ubuntu with KDE Desktop
- SUSE15 with KDE Desktop
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Y.C. Chen [Tue, 30 Oct 2018 03:34:46 +0000 (11:34 +0800)]
drm/ast: fixed cursor may disappear sometimes
commit
7989b9ee8bafe5cc625381dd0c3c4586de27ca26 upstream.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 22 Oct 2018 16:24:27 +0000 (09:24 -0700)]
llc: do not use sk_eat_skb()
commit
604d415e2bd642b7e02c80e719e0396b9d4a77a6 upstream.
syzkaller triggered a use-after-free [1], caused by a combination of
skb_get() in llc_conn_state_process() and usage of sk_eat_skb()
sk_eat_skb() is assuming the skb about to be freed is only used by
the current thread. TCP/DCCP stacks enforce this because current
thread holds the socket lock.
llc_conn_state_process() wants to make sure skb does not disappear,
and holds a reference on the skb it manipulates. But as soon as this
skb is added to socket receive queue, another thread can consume it.
This means that llc must use regular skb_unlink() and kfree_skb()
so that both producer and consumer can safely work on the same skb.
[1]
BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
BUG: KASAN: use-after-free in refcount_read include/linux/refcount.h:43 [inline]
BUG: KASAN: use-after-free in skb_unref include/linux/skbuff.h:967 [inline]
BUG: KASAN: use-after-free in kfree_skb+0xb7/0x580 net/core/skbuff.c:655
Read of size 4 at addr
ffff8801d1f6fba4 by task ksoftirqd/1/18
CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.19.0-rc8+ #295
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c4/0x2b6 lib/dump_stack.c:113
print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272
atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
refcount_read include/linux/refcount.h:43 [inline]
skb_unref include/linux/skbuff.h:967 [inline]
kfree_skb+0xb7/0x580 net/core/skbuff.c:655
llc_sap_state_process+0x9b/0x550 net/llc/llc_sap.c:224
llc_sap_rcv+0x156/0x1f0 net/llc/llc_sap.c:297
llc_sap_handler+0x65e/0xf80 net/llc/llc_sap.c:438
llc_rcv+0x79e/0xe20 net/llc/llc_input.c:208
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
process_backlog+0x218/0x6f0 net/core/dev.c:5829
napi_poll net/core/dev.c:6249 [inline]
net_rx_action+0x7c5/0x1950 net/core/dev.c:6315
__do_softirq+0x30c/0xb03 kernel/softirq.c:292
run_ksoftirqd+0x94/0x100 kernel/softirq.c:653
smpboot_thread_fn+0x68b/0xa00 kernel/smpboot.c:164
kthread+0x35a/0x420 kernel/kthread.c:246
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413
Allocated by task 18:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
kmem_cache_alloc_node+0x144/0x730 mm/slab.c:3644
__alloc_skb+0x119/0x770 net/core/skbuff.c:193
alloc_skb include/linux/skbuff.h:995 [inline]
llc_alloc_frame+0xbc/0x370 net/llc/llc_sap.c:54
llc_station_ac_send_xid_r net/llc/llc_station.c:52 [inline]
llc_station_rcv+0x1dc/0x1420 net/llc/llc_station.c:111
llc_rcv+0xc32/0xe20 net/llc/llc_input.c:220
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
process_backlog+0x218/0x6f0 net/core/dev.c:5829
napi_poll net/core/dev.c:6249 [inline]
net_rx_action+0x7c5/0x1950 net/core/dev.c:6315
__do_softirq+0x30c/0xb03 kernel/softirq.c:292
Freed by task 16383:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kmem_cache_free+0x83/0x290 mm/slab.c:3756
kfree_skbmem+0x154/0x230 net/core/skbuff.c:582
__kfree_skb+0x1d/0x20 net/core/skbuff.c:642
sk_eat_skb include/net/sock.h:2366 [inline]
llc_ui_recvmsg+0xec2/0x1610 net/llc/af_llc.c:882
sock_recvmsg_nosec net/socket.c:794 [inline]
sock_recvmsg+0xd0/0x110 net/socket.c:801
___sys_recvmsg+0x2b6/0x680 net/socket.c:2278
__sys_recvmmsg+0x303/0xb90 net/socket.c:2390
do_sys_recvmmsg+0x181/0x1a0 net/socket.c:2466
__do_sys_recvmmsg net/socket.c:2484 [inline]
__se_sys_recvmmsg net/socket.c:2480 [inline]
__x64_sys_recvmmsg+0xbe/0x150 net/socket.c:2480
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff8801d1f6fac0
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 228 bytes inside of
232-byte region [
ffff8801d1f6fac0,
ffff8801d1f6fba8)
The buggy address belongs to the page:
page:
ffffea000747dbc0 count:1 mapcount:0 mapping:
ffff8801d9be7680 index:0xffff8801d1f6fe80
flags: 0x2fffc0000000100(slab)
raw:
02fffc0000000100 ffffea0007346e88 ffffea000705b108 ffff8801d9be7680
raw:
ffff8801d1f6fe80 ffff8801d1f6f0c0 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801d1f6fa80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8801d1f6fb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff8801d1f6fb80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
^
ffff8801d1f6fc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801d1f6fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Price [Mon, 8 Oct 2018 12:52:43 +0000 (07:52 -0500)]
gfs2: Don't leave s_fs_info pointing to freed memory in init_sbd
commit
4c62bd9cea7bcf10292f7e4c57a2bca332942697 upstream.
When alloc_percpu() fails, sdp gets freed but sb->s_fs_info still points
to the same address. Move the assignment after that error check so that
s_fs_info can only point to a valid sdp or NULL, which is checked for
later in the error path, in gfs2_kill_super().
Reported-by: syzbot+dcb8b3587445007f5808@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Mon, 29 Oct 2018 15:10:29 +0000 (23:10 +0800)]
sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer
commit
df132eff463873e14e019a07f387b4d577d6d1f9 upstream.
If a transport is removed by asconf but there still are some chunks with
this transport queuing on out_chunk_list, later an use-after-free issue
will be caused when accessing this transport from these chunks in
sctp_outq_flush().
This is an old bug, we fix it by clearing the transport of these chunks
in out_chunk_list when removing a transport in sctp_assoc_rm_peer().
Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Fri, 2 Nov 2018 22:48:42 +0000 (15:48 -0700)]
bfs: add sanity check at bfs_fill_super()
commit
9f2df09a33aa2c76ce6385d382693f98d7f2f07e upstream.
syzbot is reporting too large memory allocation at bfs_fill_super() [1].
Since file system image is corrupted such that bfs_sb->s_start == 0,
bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix
this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and
printf().
[1] https://syzkaller.appspot.com/bug?id=
16a87c236b951351374a84c8a32f40edbc034e96
Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tigran Aivazian <aivazian.tigran@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dominique Martinet [Mon, 27 Aug 2018 06:12:05 +0000 (15:12 +0900)]
v9fs_dir_readdir: fix double-free on p9stat_read error
commit
81c99089bce693b94b775b6eb888115d2d540086 upstream.
p9stat_read will call p9stat_free on error, we should only free the
struct content on success.
There also is no need to "p9stat_init" st as the read function will
zero the whole struct for us anyway, so clean up the code a bit while
we are here.
Link: http://lkml.kernel.org/r/1535410108-20650-1-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dennis Wassenberg [Tue, 13 Nov 2018 13:40:34 +0000 (14:40 +0100)]
usb: core: Fix hub port connection events lost
commit
22454b79e6de05fa61a2a72d00d2eed798abbb75 upstream.
This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset
only if a device is was attached to the hub port before resetting the hub port.
Using a Lenovo T480s attached to the ultra dock it was not possible to detect
some usb-c devices at the dock usb-c ports because the hub_port_reset code
will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset.
Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the
actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit.
This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the
new device was attached such that it was not detected.
This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is
currently no device attached to the port before the hub port reset.
This will avoid clearing the connection bit for new attached devices.
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 27 Nov 2018 15:05:38 +0000 (16:05 +0100)]
Linux 3.18.127
Eric Biggers [Wed, 14 Nov 2018 21:55:09 +0000 (13:55 -0800)]
HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges
commit
8c01db7619f07c85c5cd81ec5eb83608b56c88f5 upstream.
When a UHID_CREATE command is written to the uhid char device, a
copy_from_user() is done from a user pointer embedded in the command.
When the address limit is KERNEL_DS, e.g. as is the case during
sys_sendfile(), this can read from kernel memory. Alternatively,
information can be leaked from a setuid binary that is tricked to write
to the file descriptor. Therefore, forbid UHID_CREATE in these cases.
No other commands in uhid_char_write() are affected by this bug and
UHID_CREATE is marked as "obsolete", so apply the restriction to
UHID_CREATE only rather than to uhid_char_write() entirely.
Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to
Jann Horn for commit
9da3f2b740544 ("x86/fault: BUG() when uaccess
helpers fault on kernel addresses"), allowing this bug to be found.
Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com
Fixes:
d365c6cfd337 ("HID: uhid: add UHID_CREATE and UHID_DESTROY events")
Cc: <stable@vger.kernel.org> # v3.6+
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Tue, 21 Mar 2017 01:08:07 +0000 (21:08 -0400)]
new helper: uaccess_kernel()
commit
db68ce10c4f0a27c1ff9fa0e789e5c41f8c4ea63 upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[only take the include/linux/uaccess.h portion - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 19 Nov 2018 18:06:01 +0000 (19:06 +0100)]
ACPI / platform: Add SMB0001 HID to forbidden_id_list
commit
2bbb5fa37475d7aa5fa62f34db1623f3da2dfdfa upstream.
Many HP AMD based laptops contain an SMB0001 device like this:
Device (SMBD)
{
Name (_HID, "SMB0001") // _HID: Hardware ID
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
IO (Decode16,
0x0B20, // Range Minimum
0x0B20, // Range Maximum
0x20, // Alignment
0x20, // Length
)
IRQ (Level, ActiveLow, Shared, )
{7}
})
}
The legacy style IRQ resource here causes acpi_dev_get_irqresource() to
be called with legacy=true and this message to show in dmesg:
ACPI: IRQ 7 override to edge, high
This causes issues when later on the AMD0030 GPIO device gets enumerated:
Device (GPIO)
{
Name (_HID, "AMDI0030") // _HID: Hardware ID
Name (_CID, "AMDI0030") // _CID: Compatible ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
{
0x00000007,
}
Memory32Fixed (ReadWrite,
0xFED81500, // Address Base
0x00000400, // Address Length
)
})
Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */
}
}
Now acpi_dev_get_irqresource() gets called with legacy=false, but because
of the earlier override of the trigger-type acpi_register_gsi() returns
-EBUSY (because we try to register the same interrupt with a different
trigger-type) and we end up setting IORESOURCE_DISABLED in the flags.
The setting of IORESOURCE_DISABLED causes platform_get_irq() to call
acpi_irq_get() which is not implemented on x86 and returns -EINVAL.
resulting in the following in dmesg:
amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22
amd_gpio: probe of AMDI0030:00 failed with error -22
The SMB0001 is a "virtual" device in the sense that the only way the OS
interacts with it is through calling a couple of methods to do SMBus
transfers. As such it is weird that it has IO and IRQ resources at all,
because the driver for it is not expected to ever access the hardware
directly.
The Linux driver for the SMB0001 device directly binds to the acpi_device
through the acpi_bus, so we do not need to instantiate a platform_device
for this ACPI device. This commit adds the SMB0001 HID to the
forbidden_id_list, avoiding the instantiating of a platform_device for it.
Not instantiating a platform_device means we will no longer call
acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of
the AMDI0030 device failing.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523
Reported-by: Lukas Kahnert <openproggerfreak@gmail.com>
Tested-by: Marc <suaefar@googlemail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mattias Jacobsson [Sun, 21 Oct 2018 09:25:37 +0000 (11:25 +0200)]
USB: misc: appledisplay: add 20" Apple Cinema Display
commit
f6501f49199097b99e4e263644d88c90d1ec1060 upstream.
Add another Apple Cinema Display to the list of supported displays
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 17 Oct 2018 17:09:02 +0000 (10:09 -0700)]
misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data
commit
7c97301285b62a41d6bceded7d964085fc8cc50f upstream.
After building the kernel with Clang, the following section mismatch
warning appears:
WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from
the function ssc_probe() to the function
.init.text:atmel_ssc_get_driver_data()
The function ssc_probe() references
the function __init atmel_ssc_get_driver_data().
This is often because ssc_probe lacks a __init
annotation or the annotation of atmel_ssc_get_driver_data is wrong.
Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emmanuel Pescosta [Fri, 26 Oct 2018 12:48:09 +0000 (14:48 +0200)]
usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB
commit
a77112577667cbda7c6292c52d909636aef31fd9 upstream.
Following on from this patch: https://lkml.org/lkml/2017/11/3/516,
Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to
start correctly at boot.
Dmesg output:
usb 1-6: string descriptor 0 read error: -110
usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: can't set config #1, error -110
Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Fri, 26 Oct 2018 05:33:15 +0000 (13:33 +0800)]
USB: quirks: Add no-lpm quirk for Raydium touchscreens
commit
deefd24228a172d1b27d4a9adbfd2cdacd60ae64 upstream.
Raydium USB touchscreen fails to set config if LPM is enabled:
[ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119
[ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.030660] usb 1-8: Product: Raydium Touch System
[ 2.030661] usb 1-8: Manufacturer: Raydium Corporation
[ 7.132209] usb 1-8: can't set config #1, error -110
Same behavior can be observed on 2386:3114.
Raydium claims the touchscreen supports LPM under Windows, so I used
Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows
that the LPM doesn't work under Windows, either. So let's just disable LPM
for Raydium touchscreens.
[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Jacobs [Mon, 19 Nov 2018 23:18:49 +0000 (23:18 +0000)]
usb: cdc-acm: add entry for Hiro (Conexant) modem
commit
63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream.
The cdc-acm kernel module currently does not support the Hiro (Conexant)
H05228 USB modem. The patch below adds the device specific information:
idVendor 0x0572
idProduct 0x1349
Signed-off-by: Maarten Jacobs <maarten256@outlook.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 26 Oct 2018 07:19:51 +0000 (10:19 +0300)]
uio: Fix an Oops on load
commit
432798195bbce1f8cd33d1c0284d0538835e25fb upstream.
I was trying to solve a double free but I introduced a more serious
NULL dereference bug. The problem is that if there is an IRQ which
triggers immediately, then we need "info->uio_dev" but it's not set yet.
This patch puts the original initialization back to how it was and just
sets info->uio_dev to NULL on the error path so it should solve both
the Oops and the double free.
Fixes:
f019f07ecf6a ("uio: potential double frees if __uio_register_device() fails")
Reported-by: Mathias Thore <Mathias.Thore@infinera.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Mathias Thore <Mathias.Thore@infinera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sakari Ailus [Mon, 5 Nov 2018 14:35:44 +0000 (09:35 -0500)]
media: v4l: event: Add subscription to list before calling "add" operation
commit
92539d3eda2c090b382699bbb896d4b54e9bdece upstream.
Patch
ad608fbcf166 changed how events were subscribed to address an issue
elsewhere. As a side effect of that change, the "add" callback was called
before the event subscription was added to the list of subscribed events,
causing the first event queued by the add callback (and possibly other
events arriving soon afterwards) to be lost.
Fix this by adding the subscription to the list before calling the "add"
callback, and clean up afterwards if that fails.
Fixes:
ad608fbcf166 ("media: v4l: event: Prevent freeing event subscriptions while accessed")
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org (for 4.14 and up)
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 26 Nov 2018 07:22:30 +0000 (08:22 +0100)]
Revert "Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV"
This reverts commit
209c27b04ccc679bd7da0b84c2144733ce79c8a3 which is
commit
6c3711ec64fd23a9abc8aaf59a9429569a6282df upstream.
You Ling writes that this config option isn't even in 3.18.y yet, so it
causes a regression. Revert the patch because of this.
Reported-by: youling 257 <youling257@gmail.com>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Thu, 8 Nov 2018 02:04:57 +0000 (02:04 +0000)]
SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer()
[ Upstream commit
025911a5f4e36955498ed50806ad1b02f0f76288 ]
There is no need to have the '__be32 *p' variable static since new value
always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Levin [Fri, 23 Nov 2018 19:05:17 +0000 (14:05 -0500)]
Revert "Revert "drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES""
This reverts commit
bc07ee33284ac6e6872d5efad1b321ec0b7b46a4. Which is
upstream commit
a50940510e94f5fb65ffd79877a60592d85598a9.
This revert relies on upstream commit
a63b03e2d24 ("mutex: Always clear
owner field upon mutex_unlock()") being in the tree, but that commit
should not be backported.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minchan Kim [Fri, 23 Nov 2018 06:30:22 +0000 (15:30 +0900)]
zram: close udev startup race condition as default groups
commit
fef912bf860e upstream.
commit
98af4d4df889 upstream.
I got a report from Howard Chen that he saw zram and sysfs race(ie,
zram block device file is created but sysfs for it isn't yet)
when he tried to create new zram devices via hotadd knob.
v4.20 kernel fixes it by [1, 2] but it's too large size to merge
into -stable so this patch fixes the problem by registering defualt
group by Greg KH's approach[3].
This patch should be applied to every stable tree [3.16+] currently
existing from kernel.org because the problem was introduced at 2.6.37
by [4].
[1]
fef912bf860e, block: genhd: add 'groups' argument to device_add_disk
[2]
98af4d4df889, zram: register default groups with device_add_disk()
[3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/
[4]
33863c21e69e9, Staging: zram: Replace ioctls with sysfs interface
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Tested-by: Howard Chen <howardsoc@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeremy Linton [Tue, 6 Nov 2018 00:14:41 +0000 (18:14 -0600)]
lib/raid6: Fix arm64 test build
[ Upstream commit
313a06e636808387822af24c507cba92703568b1 ]
The lib/raid6/test fails to build the neon objects
on arm64 because the correct machine type is 'aarch64'.
Once this is correctly enabled, the neon recovery objects
need to be added to the build.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Gorbik [Fri, 19 Oct 2018 13:37:01 +0000 (15:37 +0200)]
s390/vdso: add missing FORCE to build targets
[ Upstream commit
b44b136a3773d8a9c7853f8df716bd1483613cbb ]
According to Documentation/kbuild/makefiles.txt all build targets using
if_changed should use FORCE as well. Add missing FORCE to make sure
vdso targets are rebuild properly when not just immediate prerequisites
have changed but also when build command differs.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Mon, 24 Sep 2018 11:01:20 +0000 (13:01 +0200)]
clk: samsung: exynos5420: Enable PERIS clocks for suspend
[ Upstream commit
b33228029d842269e17bba591609e83ed422005d ]
Ensure that clocks for core SoC modules (including TZPC0..9 modules)
are enabled for suspend/resume cycle. This fixes suspend/resume
support on Exynos5422-based Odroid XU3/XU4 boards.
Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chengguang Xu [Wed, 13 Jun 2018 04:05:13 +0000 (12:05 +0800)]
fs/exofs: fix potential memory leak in mount option parsing
[ Upstream commit
515f1867addaba49c1c6ac73abfaffbc192c1db4 ]
There are some cases can cause memory leak when parsing
option 'osdname'.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Weinberger [Fri, 15 Jun 2018 14:42:56 +0000 (16:42 +0200)]
um: Give start_idle_thread() a return code
[ Upstream commit
7ff1e34bbdc15acab823b1ee4240e94623d50ee8 ]
Fixes:
arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of
non-void function [-Wreturn-type]
longjmp() never returns but gcc still warns that the end of the function
can be reached.
Add a return code and debug aid to detect this impossible case.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ernesto A. Fernández [Tue, 30 Oct 2018 22:06:00 +0000 (15:06 -0700)]
hfsplus: prevent btree data loss on root split
[ Upstream commit
0a3021d4f5295aa073c7bf5c5e4de60a2e292578 ]
Creating, renaming or deleting a file may cause catalog corruption and
data loss. This bug is randomly triggered by xfstests generic/027, but
here is a faster reproducer:
truncate -s 50M fs.iso
mkfs.hfsplus fs.iso
mount fs.iso /mnt
i=100
while [ $i -le 150 ]; do
touch /mnt/$i &>/dev/null
((++i))
done
i=100
while [ $i -le 150 ]; do
mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null
((++i))
done
umount /mnt
fsck.hfsplus -n fs.iso
The bug is triggered whenever hfs_brec_update_parent() needs to split the
root node. The height of the btree is not increased, which leaves the new
node orphaned and its records lost.
Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ernesto A. Fernández [Tue, 30 Oct 2018 22:06:07 +0000 (15:06 -0700)]
hfs: prevent btree data loss on root split
[ Upstream commit
d057c036672f33d43a5f7344acbb08cf3a8a0c09 ]
This bug is triggered whenever hfs_brec_update_parent() needs to split
the root node. The height of the btree is not increased, which leaves
the new node orphaned and its records lost. It is not possible for this
to happen on a valid hfs filesystem because the index nodes have fixed
length keys.
For reasons I ignore, the hfs module does have support for a number of
hfsplus features. A corrupt btree header may report variable length
keys and trigger this bug, so it's better to fix it.
Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jann Horn [Tue, 30 Oct 2018 22:06:38 +0000 (15:06 -0700)]
reiserfs: propagate errors from fill_with_dentries() properly
[ Upstream commit
b10298d56c9623f9b173f19959732d3184b35f4f ]
fill_with_dentries() failed to propagate errors up to
reiserfs_for_each_xattr() properly. Plumb them through.
Note that reiserfs_for_each_xattr() is only used by
reiserfs_delete_xattrs() and reiserfs_chown_xattrs(). The result of
reiserfs_delete_xattrs() is discarded anyway, the only difference there is
whether a warning is printed to dmesg. The result of
reiserfs_chown_xattrs() does matter because it can block chowning of the
file to which the xattrs belong; but either way, the resulting state can
have misaligned ownership, so my patch doesn't improve things greatly.
Credit for making me look at this code goes to Al Viro, who pointed out
that the ->actor calling convention is suboptimal and should be changed.
Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Sun, 18 Nov 2018 05:57:02 +0000 (21:57 -0800)]
net-gro: reset skb->pkt_type in napi_reuse_skb()
[ Upstream commit
33d9a2c72f086cbf1087b2fd2d1a15aa9df14a7f ]
eth_type_trans() assumes initial value for skb->pkt_type
is PACKET_HOST.
This is indeed the value right after a fresh skb allocation.
However, it is possible that GRO merged a packet with a different
value (like PACKET_OTHERHOST in case macvlan is used), so
we need to make sure napi->skb will have pkt_type set back to
PACKET_HOST.
Otherwise, valid packets might be dropped by the stack because
their pkt_type is not PACKET_HOST.
napi_reuse_skb() was added in commit
96e93eab2033 ("gro: Add
internal interfaces for VLAN"), but this bug always has
been there.
Fixes:
96e93eab2033 ("gro: Add internal interfaces for VLAN")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 22 Nov 2018 06:32:49 +0000 (07:32 +0100)]
Linux 3.18.126
Mike Kravetz [Fri, 16 Nov 2018 23:08:04 +0000 (15:08 -0800)]
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
commit
5e41540c8a0f0e98c337dda8b391e5dda0cde7cf upstream.
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes:
c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sun, 1 Jul 2018 20:56:54 +0000 (13:56 -0700)]
configfs: replace strncpy with memcpy
commit
1823342a1f2b47a4e6f5667f67cd28ab6bc4d6cd upstream.
gcc 8.1.0 complains:
fs/configfs/symlink.c:67:3: warning:
'strncpy' output truncated before terminating nul copying as many
bytes from a string as its length
fs/configfs/symlink.c: In function 'configfs_get_link':
fs/configfs/symlink.c:63:13: note: length computed here
Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Fri, 9 Nov 2018 14:52:16 +0000 (15:52 +0100)]
fuse: fix leaked notify reply
commit
7fabaf303458fcabb694999d6fa772cc13d4e217 upstream.
fuse_request_send_notify_reply() may fail if the connection was reset for
some reason (e.g. fs was unmounted). Don't leak request reference in this
case. Besides leaking memory, this resulted in fc->num_waiting not being
decremented and hence fuse_wait_aborted() left in a hanging and unkillable
state.
Fixes:
2d45ba381a74 ("fuse: add retrieve request")
Fixes:
b8f95e5d13f5 ("fuse: umount should wait for all requests")
Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> #v2.6.36
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Sorenson [Tue, 30 Oct 2018 20:10:40 +0000 (15:10 -0500)]
sunrpc: correct the computation for page_ptr when truncating
commit
5d7a5bcb67c70cbc904057ef52d3fcfeb24420bb upstream.
When truncating the encode buffer, the page_ptr is getting
advanced, causing the next page to be skipped while encoding.
The page is still included in the response, so the response
contains a page of bogus data.
We need to adjust the page_ptr backwards to ensure we encode
the next page into the correct place.
We saw this triggered when concurrent directory modifications caused
nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting
call to xdr_truncate_encode() corrupted the READDIR reply.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Thu, 25 Oct 2018 17:05:11 +0000 (12:05 -0500)]
mount: Prevent MNT_DETACH from disconnecting locked mounts
commit
9c8e0a1b683525464a2abe9fb4b54404a50ed2b4 upstream.
Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote:
> As per mount_namespaces(7) unprivileged users should not be able to look under mount points:
>
> Mounts that come as a single unit from more privileged mount are locked
> together and may not be separated in a less privileged mount namespace.
>
> However they can:
>
> 1. Create a mount namespace.
> 2. In the mount namespace open a file descriptor to the parent of a mount point.
> 3. Destroy the mount namespace.
> 4. Use the file descriptor to look under the mount point.
>
> I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8.
>
> The setup:
>
> $ sudo sysctl kernel.unprivileged_userns_clone=1
> kernel.unprivileged_userns_clone = 1
> $ mkdir -p A/B/Secret
> $ sudo mount -t tmpfs hide A/B
>
>
> "Secret" is indeed hidden as expected:
>
> $ ls -lR A
> A:
> total 0
> drwxrwxrwt 2 root root 40 Feb 12 21:08 B
>
> A/B:
> total 0
>
>
> The attack revealing "Secret":
>
> $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A"
> /proc/self/fd/4/:
> total 0
> drwxr-xr-x 3 root root 60 Feb 12 21:08 B
>
> /proc/self/fd/4/B:
> total 0
> drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret
>
> /proc/self/fd/4/B/Secret:
> total 0
I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and
disconnecting all of the mounts in a mount namespace. Fix this by
factoring drop_mounts out of drop_collected_mounts and passing
0 instead of UMOUNT_SYNC.
There are two possible behavior differences that result from this.
- No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on
the vfsmounts being unmounted. This effects the lazy rcu walk by
kicking the walk out of rcu mode and forcing it to be a non-lazy
walk.
- No longer disconnecting locked mounts will keep some mounts around
longer as they stay because the are locked to other mounts.
There are only two users of drop_collected mounts: audit_tree.c and
put_mnt_ns.
In audit_tree.c the mounts are private and there are no rcu lazy walks
only calls to iterate_mounts. So the changes should have no effect
except for a small timing effect as the connected mounts are disconnected.
In put_mnt_ns there may be references from process outside the mount
namespace to the mounts. So the mounts remaining connected will
be the bug fix that is needed. That rcu walks are allowed to continue
appears not to be a problem especially as the rcu walk change was about
an implementation detail not about semantics.
Cc: stable@vger.kernel.org
Fixes:
5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Tested-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Thu, 25 Oct 2018 14:04:18 +0000 (09:04 -0500)]
mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts
commit
df7342b240185d58d3d9665c0bbf0a0f5570ec29 upstream.
Jonathan Calmels from NVIDIA reported that he's able to bypass the
mount visibility security check in place in the Linux kernel by using
a combination of the unbindable property along with the private mount
propagation option to allow a unprivileged user to see a path which
was purposefully hidden by the root user.
Reproducer:
# Hide a path to all users using a tmpfs
root@castiana:~# mount -t tmpfs tmpfs /sys/devices/
root@castiana:~#
# As an unprivileged user, unshare user namespace and mount namespace
stgraber@castiana:~$ unshare -U -m -r
# Confirm the path is still not accessible
root@castiana:~# ls /sys/devices/
# Make /sys recursively unbindable and private
root@castiana:~# mount --make-runbindable /sys
root@castiana:~# mount --make-private /sys
# Recursively bind-mount the rest of /sys over to /mnnt
root@castiana:~# mount --rbind /sys/ /mnt
# Access our hidden /sys/device as an unprivileged user
root@castiana:~# ls /mnt/devices/
breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe
LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system
tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual
Solve this by teaching copy_tree to fail if a mount turns out to be
both unbindable and locked.
Cc: stable@vger.kernel.org
Fixes:
5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Jonathan Calmels <jcalmels@nvidia.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Mon, 22 Oct 2018 15:21:38 +0000 (10:21 -0500)]
mount: Retest MNT_LOCKED in do_umount
commit
25d202ed820ee347edec0bf3bf553544556bf64b upstream.
It was recently pointed out that the one instance of testing MNT_LOCKED
outside of the namespace_sem is in ksys_umount.
Fix that by adding a test inside of do_umount with namespace_sem and
the mount_lock held. As it helps to fail fails the existing test is
maintained with an additional comment pointing out that it may be racy
because the locks are not held.
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes:
5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Thu, 8 Nov 2018 03:36:23 +0000 (22:36 -0500)]
ext4: fix buffer leak in __ext4_read_dirblock() on error path
commit
de59fae0043f07de5d25e02ca360f7d57bfa5866 upstream.
Fixes:
dc6982ff4db1 ("ext4: refactor code to read directory blocks ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Wed, 7 Nov 2018 16:10:21 +0000 (11:10 -0500)]
ext4: fix buffer leak in ext4_xattr_move_to_block() on error path
commit
6bdc9977fcdedf47118d2caf7270a19f4b6d8a8f upstream.
Fixes:
3f2571c1f91f ("ext4: factor out xattr moving")
Fixes:
6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.23
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Wed, 7 Nov 2018 16:07:01 +0000 (11:07 -0500)]
ext4: release bs.bh before re-using in ext4_xattr_block_find()
commit
45ae932d246f721e6584430017176cbcadfde610 upstream.
bs.bh was taken in previous ext4_xattr_block_find() call,
it should be released before re-using
Fixes:
7e01c8e5420b ("ext3/4: fix uninitialized bs in ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.26
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Wed, 7 Nov 2018 15:32:53 +0000 (10:32 -0500)]
ext4: fix possible leak of sbi->s_group_desc_leak in error path
commit
9e463084cdb22e0b56b2dfbc50461020409a5fd3 upstream.
Fixes:
bfe0a5f47ada ("ext4: add more mount time checks of the superblock")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.18
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 6 Nov 2018 22:18:17 +0000 (17:18 -0500)]
ext4: avoid possible double brelse() in add_new_gdb() on error path
commit
4f32c38b4662312dd3c5f113d8bdd459887fb773 upstream.
Fixes:
b40971426a83 ("ext4: add error checking to calls to ...")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.38
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Tue, 6 Nov 2018 21:16:01 +0000 (16:16 -0500)]
ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing
commit
f348e2241fb73515d65b5d77dd9c174128a7fbf2 upstream.
Fixes:
117fff10d7f1 ("ext4: grow the s_flex_groups array as needed ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Tue, 6 Nov 2018 22:01:36 +0000 (17:01 -0500)]
ext4: avoid buffer leak in ext4_orphan_add() after prior errors
commit
feaf264ce7f8d54582e2f66eb82dd9dd124c94f3 upstream.
Fixes:
d745a8c20c1f ("ext4: reduce contention on s_orphan_lock")
Fixes:
6e3617e579e0 ("ext4: Handle non empty on-disk orphan link")
Cc: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.34
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Tue, 6 Nov 2018 21:20:40 +0000 (16:20 -0500)]
ext4: fix possible inode leak in the retry loop of ext4_resize_fs()
commit
db6aee62406d9fbb53315fcddd81f1dc271d49fa upstream.
Fixes:
1c6bd7173d66 ("ext4: convert file system to meta_bg if needed ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Sat, 3 Nov 2018 20:13:17 +0000 (16:13 -0400)]
ext4: avoid potential extra brelse in setup_new_flex_group_blocks()
commit
9e4028935cca3f9ef9b6a90df9da6f1f94853536 upstream.
Currently bh is set to NULL only during first iteration of for cycle,
then this pointer is not cleared after end of using.
Therefore rollback after errors can lead to extra brelse(bh) call,
decrements bh counter and later trigger an unexpected warning in __brelse()
Patch moves brelse() calls in body of cycle to exclude requirement of
brelse() call in rollback.
Fixes:
33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Sat, 3 Nov 2018 20:50:08 +0000 (16:50 -0400)]
ext4: add missing brelse() add_new_gdb_meta_bg()'s error path
commit
61a9c11e5e7a0dab5381afa5d9d4dd5ebf18f7a0 upstream.
Fixes:
01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Sat, 3 Nov 2018 20:22:10 +0000 (16:22 -0400)]
ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path
commit
cea5794122125bf67559906a0762186cf417099c upstream.
Fixes:
33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Cc: stable@kernel.org # 3.3
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Sat, 3 Nov 2018 21:11:19 +0000 (17:11 -0400)]
ext4: add missing brelse() update_backups()'s error path
commit
ea0abbb648452cdb6e1734b702b6330a7448fcf8 upstream.
Fixes:
ac27a0ec112a ("ext4: initial copy of files from ext3")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Peter Anvin (Intel) [Mon, 22 Oct 2018 16:19:05 +0000 (09:19 -0700)]
arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
commit
d0ffb805b729322626639336986bc83fc2e60871 upstream.
Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags
using arbitrary flags. Because BOTHER is not defined, the general
Linux code doesn't allow setting arbitrary baud rates, and because
CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in
drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037.
Resolve both problems by #defining BOTHER to 037 on Alpha.
However, userspace still needs to know if setting BOTHER is actually
safe given legacy kernels (does anyone actually care about that on
Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even
though they use the same structure. Define struct termios2 just for
compatibility; it is the exact same structure as struct termios. In a
future patchset, this will be cleaned up so the uapi headers are
usable from libc.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: <linux-alpha@vger.kernel.org>
Cc: <linux-serial@vger.kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Peter Anvin [Mon, 22 Oct 2018 16:19:04 +0000 (09:19 -0700)]
termios, tty/tty_baudrate.c: fix buffer overrun
commit
991a25194097006ec1e0d2e0814ff920e59e3465 upstream.
On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does
not do any limit checking on the tty_baudrate[] array, and in fact a
buffer overrun is possible on both architectures. Add a limit check to
prevent that situation.
This will be followed by a much bigger cleanup/simplification patch.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Requested-by: Cc: Johan Hovold <johan@kernel.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 11 Oct 2018 11:06:16 +0000 (13:06 +0200)]
mtd: docg3: don't set conflicting BCH_CONST_PARAMS option
commit
be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream.
I noticed during the creation of another bugfix that the BCH_CONST_PARAMS
option that is set by DOCG3 breaks setting variable parameters for any
other users of the BCH library code.
The only other user we have today is the MTD_NAND software BCH
implementation (most flash controllers use hardware BCH these days
and are not affected). I considered removing BCH_CONST_PARAMS entirely
because of the inherent conflict, but according to the description in
lib/bch.c there is a significant performance benefit in keeping it.
To avoid the immediate problem of the conflict between MTD_NAND_BCH
and DOCG3, this only sets the constant parameters if MTD_NAND_BCH
is disabled, which should fix the problem for all cases that
are affected. This should also work for all stable kernels.
Note that there is only one machine that actually seems to use the
DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have
the driver disabled, but it almost certainly shows up if we wanted
to test random kernels on machines that use software BCH in MTD.
Fixes:
d13d19ece39f ("mtd: docg3: add ECC correction code")
Cc: stable@vger.kernel.org
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changwei Ge [Fri, 2 Nov 2018 22:48:15 +0000 (15:48 -0700)]
ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry
commit
29aa30167a0a2e6045a0d6d2e89d8168132333d5 upstream.
Somehow, file system metadata was corrupted, which causes
ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
According to the original design intention, if above happens we should
skip the problematic block and continue to retrieve dir entry. But
there is obviouse misuse of brelse around related code.
After failure of ocfs2_check_dir_entry(), current code just moves to
next position and uses the problematic buffer head again and again
during which the problematic buffer head is released for multiple times.
I suppose, this a serious issue which is long-lived in ocfs2. This may
cause other file systems which is also used in a the same host insane.
So we should also consider about bakcporting this patch into linux
-stable.
Link: http://lkml.kernel.org/r/HK2PR06MB045211675B43EED794E597B6D56E0@HK2PR06MB0452.apcprd06.prod.outlook.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Mon, 8 Oct 2018 10:57:35 +0000 (12:57 +0200)]
mach64: fix image corruption due to reading accelerator registers
commit
c09bcc91bb94ed91f1391bffcbe294963d605732 upstream.
Reading the registers without waiting for engine idle returns
unpredictable values. These unpredictable values result in display
corruption - if atyfb_imageblit reads the content of DP_PIX_WIDTH with the
bit DP_HOST_TRIPLE_EN set (from previous invocation), the driver would
never ever clear the bit, resulting in display corruption.
We don't want to wait for idle because it would degrade performance, so
this patch modifies the driver so that it never reads accelerator
registers.
HOST_CNTL doesn't have to be read, we can just write it with
HOST_BYTE_ALIGN because no other part of the driver cares if
HOST_BYTE_ALIGN is set.
DP_PIX_WIDTH is written in the functions atyfb_copyarea and atyfb_fillrect
with the default value and in atyfb_imageblit with the value set according
to the source image data.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Mon, 8 Oct 2018 10:57:34 +0000 (12:57 +0200)]
mach64: fix display corruption on big endian machines
commit
3c6c6a7878d00a3ac997a779c5b9861ff25dfcc8 upstream.
The code for manual bit triple is not endian-clean. It builds the variable
"hostdword" using byte accesses, therefore we must read the variable with
"le32_to_cpu".
The patch also enables (hardware or software) bit triple only if the image
is monochrome (image->depth). If we want to blit full-color image, we
shouldn't use the triple code.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Wed, 26 Sep 2018 16:03:16 +0000 (18:03 +0200)]
libceph: bump CEPH_MSG_MAX_DATA_LEN
commit
94e6992bb560be8bffb47f287194adf070b57695 upstream.
If the read is large enough, we end up spinning in the messenger:
libceph: osd0 192.168.122.1:6801 io error
libceph: osd0 192.168.122.1:6801 io error
libceph: osd0 192.168.122.1:6801 io error
This is a receive side limit, so only reads were affected.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>