platform/kernel/linux-rpi.git
2 years agospi: hisi-kunpeng: Fix the debugfs directory name incorrect
oujiefeng [Wed, 17 Nov 2021 01:21:19 +0000 (09:21 +0800)]
spi: hisi-kunpeng: Fix the debugfs directory name incorrect

[ Upstream commit 40fafc8eca3f0d41b9dade5c10afb2dad723aad7 ]

Change the debugfs directory name from hisi_spi65535 to hisi_spi0.

Fixes: 2b2142f247eb ("spi: hisi-kunpeng: Add debugfs support")
Signed-off-by: oujiefeng <oujiefeng@huawei.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/20211117012119.55558-1-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoath11k: reset RSN/WPA present state for open BSS
Karthikeyan Kathirvel [Mon, 15 Nov 2021 10:04:41 +0000 (11:04 +0100)]
ath11k: reset RSN/WPA present state for open BSS

[ Upstream commit 64bc3aa02ae78b1fcb1b850e0eb1f0622002bfaa ]

The ath11k driver is caching the information about RSN/WPA IE in the
configured beacon template. The cached information is used during
associations to figure out whether 4-way PKT/2-way GTK peer flags need to
be set or not.

But the code never cleared the state when no such IE was found. This can
for example happen when moving from an WPA/RSN to an open setup. The
(seemingly connected) peer was then not able to communicate over the
link because the firmware assumed a different (encryption enabled) state
for the peer.

Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Fixes: 01e34233c645 ("ath11k: fix wmi peer flags in peer assoc command")
Cc: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
[sven@narfation.org: split into separate patches, clean up commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211115100441.33771-2-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoath11k: clear the keys properly via DISABLE_KEY
Karthikeyan Kathirvel [Mon, 15 Nov 2021 10:04:40 +0000 (11:04 +0100)]
ath11k: clear the keys properly via DISABLE_KEY

[ Upstream commit 436a4e88659842a7cf634d7cc088c8f2cc94ebf5 ]

DISABLE_KEY sets the key_len to 0, firmware will not delete the keys if
key_len is 0. Changing from security mode to open mode will cause mcast
to be still encrypted without vdev restart.

Set the proper key_len for DISABLE_KEY cmd to clear the keys in
firmware.

Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
[sven@narfation.org: split into separate patches, clean up commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211115100441.33771-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoath11k: Fix ETSI regd with weather radar overlap
Sven Eckelmann [Mon, 15 Nov 2021 09:29:55 +0000 (11:29 +0200)]
ath11k: Fix ETSI regd with weather radar overlap

[ Upstream commit 086c921a354089f209318501038d43c98d3f409f ]

Some ETSI countries have a small overlap in the wireless-regdb with an ETSI
channel (5590-5650). A good example is Australia:

  country AU: DFS-ETSI
   (2400 - 2483.5 @ 40), (36)
   (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
   (5250 - 5350 @ 80), (20), NO-OUTDOOR, AUTO-BW, DFS
   (5470 - 5600 @ 80), (27), DFS
   (5650 - 5730 @ 80), (27), DFS
   (5730 - 5850 @ 80), (36)
   (57000 - 66000 @ 2160), (43), NO-OUTDOOR

If the firmware (or the BDF) is shipped with these rules then there is only
a 10 MHz overlap with the weather radar:

* below: 5470 - 5590
* weather radar: 5590 - 5600
* above: (none for the rule "5470 - 5600 @ 80")

There are several wrong assumption in the ath11k code:

* there is always a valid range below the weather radar
  (actually: there could be no range below the weather radar range OR range
   could be smaller than 20 MHz)
* intersected range in the weather radar range is valid
  (actually: the range could be smaller than 20 MHz)
* range above weather radar is either empty or valid
  (actually: the range could be smaller than 20 MHz)

These wrong assumption will lead in this example to a rule

  (5590 - 5600 @ 20), (N/A, 27), (600000 ms), DFS, AUTO-BW

which is invalid according to is_valid_reg_rule() because the freq_diff is
only 10 MHz but the max_bandwidth is set to 20 MHz. Which results in a
rejection like:

  WARNING: at backports-20210222_001-4.4.60-b157d2276/net/wireless/reg.c:3984
  [...]
  Call trace:
  [<ffffffbffc3d2e50>] reg_get_max_bandwidth+0x300/0x3a8 [cfg80211]
  [<ffffffbffc3d3d0c>] regulatory_set_wiphy_regd_sync+0x3c/0x98 [cfg80211]
  [<ffffffbffc651598>] ath11k_regd_update+0x1a8/0x210 [ath11k]
  [<ffffffbffc652108>] ath11k_regd_update_work+0x18/0x20 [ath11k]
  [<ffffffc0000a93e0>] process_one_work+0x1f8/0x340
  [<ffffffc0000a9784>] worker_thread+0x25c/0x448
  [<ffffffc0000aedc8>] kthread+0xd0/0xd8
  [<ffffffc000085550>] ret_from_fork+0x10/0x40
  ath11k c000000.wifi: failed to perform regd update : -22
  Invalid regulatory domain detected

To avoid this, the algorithm has to be changed slightly. Instead of
splitting a rule which overlaps with the weather radar range into 3 pieces
and accepting the first two parts blindly, it must actually be checked for
each piece whether it is a valid range. And only if it is valid, add it to
the output array.

When these checks are in place, the processed rules for AU would end up as

  country AU: DFS-ETSI
          (2400 - 2483 @ 40), (N/A, 36), (N/A)
          (5150 - 5250 @ 80), (6, 23), (N/A), NO-OUTDOOR, AUTO-BW
          (5250 - 5350 @ 80), (6, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
          (5470 - 5590 @ 80), (6, 27), (0 ms), DFS, AUTO-BW
          (5650 - 5730 @ 80), (6, 27), (0 ms), DFS, AUTO-BW
          (5730 - 5850 @ 80), (6, 36), (N/A), AUTO-BW

and will be accepted by the wireless regulatory code.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112153116.1214421-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoBluetooth: stop proccessing malicious adv data
Pavel Skripkin [Mon, 1 Nov 2021 07:12:12 +0000 (10:12 +0300)]
Bluetooth: stop proccessing malicious adv data

[ Upstream commit 3a56ef719f0b9682afb8a86d64b2399e36faa4e6 ]

Syzbot reported slab-out-of-bounds read in hci_le_adv_report_evt(). The
problem was in missing validaion check.

We should check if data is not malicious and we can read next data block.
If we won't check ptr validness, code can read a way beyond skb->end and
it can cause problems, of course.

Fixes: e95beb414168 ("Bluetooth: hci_le_adv_report_evt code refactoring")
Reported-and-tested-by: syzbot+e3fcb9c4f3c2a931dc40@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomemory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails
Lad Prabhakar [Mon, 25 Oct 2021 20:56:29 +0000 (21:56 +0100)]
memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails

[ Upstream commit 818fdfa89baac77a8df5a2c30f4fb798cc937aa0 ]

Make sure we return error in case devm_ioremap_resource() fails for dirmap
resource.

Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211025205631.21151-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agofs: dlm: don't call kernel_getpeername() in error_report()
Alexander Aring [Mon, 15 Nov 2021 13:57:05 +0000 (08:57 -0500)]
fs: dlm: don't call kernel_getpeername() in error_report()

[ Upstream commit 4c3d90570bcc2b338f70f61f01110268e281ca3c ]

In some cases kernel_getpeername() will held the socket lock which is
already held when the socket layer calls error_report() callback. Since
commit 9dfc685e0262 ("inet: remove races in inet{6}_getname()") this
problem becomes more likely because the socket lock will be held always.
You will see something like:

bob9-u5 login: [  562.316860] BUG: spinlock recursion on CPU#7, swapper/7/0
[  562.318562]  lock: 0xffff8f2284720088, .magic: dead4ead, .owner: swapper/7/0, .owner_cpu: 7
[  562.319522] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.15.0+ #135
[  562.320346] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
[  562.321277] Call Trace:
[  562.321529]  <IRQ>
[  562.321734]  dump_stack_lvl+0x33/0x42
[  562.322282]  do_raw_spin_lock+0x8b/0xc0
[  562.322674]  lock_sock_nested+0x1e/0x50
[  562.323057]  inet_getname+0x39/0x110
[  562.323425]  ? sock_def_readable+0x80/0x80
[  562.323838]  lowcomms_error_report+0x63/0x260 [dlm]
[  562.324338]  ? wait_for_completion_interruptible_timeout+0xd2/0x120
[  562.324949]  ? lock_timer_base+0x67/0x80
[  562.325330]  ? do_raw_spin_unlock+0x49/0xc0
[  562.325735]  ? _raw_spin_unlock_irqrestore+0x1e/0x40
[  562.326218]  ? del_timer+0x54/0x80
[  562.326549]  sk_error_report+0x12/0x70
[  562.326919]  tcp_validate_incoming+0x3c8/0x530
[  562.327347]  ? kvm_clock_read+0x14/0x30
[  562.327718]  ? ktime_get+0x3b/0xa0
[  562.328055]  tcp_rcv_established+0x121/0x660
[  562.328466]  tcp_v4_do_rcv+0x132/0x260
[  562.328835]  tcp_v4_rcv+0xcea/0xe20
[  562.329173]  ip_protocol_deliver_rcu+0x35/0x1f0
[  562.329615]  ip_local_deliver_finish+0x54/0x60
[  562.330050]  ip_local_deliver+0xf7/0x110
[  562.330431]  ? inet_rtm_getroute+0x211/0x840
[  562.330848]  ? ip_protocol_deliver_rcu+0x1f0/0x1f0
[  562.331310]  ip_rcv+0xe1/0xf0
[  562.331603]  ? ip_local_deliver+0x110/0x110
[  562.332011]  __netif_receive_skb_core+0x46a/0x1040
[  562.332476]  ? inet_gro_receive+0x263/0x2e0
[  562.332885]  __netif_receive_skb_list_core+0x13b/0x2c0
[  562.333383]  netif_receive_skb_list_internal+0x1c8/0x2f0
[  562.333896]  ? update_load_avg+0x7e/0x5e0
[  562.334285]  gro_normal_list.part.149+0x19/0x40
[  562.334722]  napi_complete_done+0x67/0x160
[  562.335134]  virtnet_poll+0x2ad/0x408 [virtio_net]
[  562.335644]  __napi_poll+0x28/0x140
[  562.336012]  net_rx_action+0x23d/0x300
[  562.336414]  __do_softirq+0xf2/0x2ea
[  562.336803]  irq_exit_rcu+0xc1/0xf0
[  562.337173]  common_interrupt+0xb9/0xd0

It is and was always forbidden to call kernel_getpeername() in context
of error_report(). To get rid of the problem we access the destination
address for the peer over the socket structure. While on it we fix to
print out the destination port of the inet socket.

Fixes: 1a31833d085a ("DLM: Replace nodeid_to_addr with kernel_getpeername")
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: dts: meson-gxbb-wetek: fix missing GPIO binding
Christian Hewitt [Tue, 12 Oct 2021 05:25:21 +0000 (05:25 +0000)]
arm64: dts: meson-gxbb-wetek: fix missing GPIO binding

[ Upstream commit c019abb2feba3cbbd7cf7178f8e6499c4fa6fced ]

The absence of this binding appears to be harmless in Linux but it breaks
Ethernet support in mainline u-boot. So add the binding (which is present
in all other u-boot supported GXBB device-trees).

Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211012052522.30873-3-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: dts: meson-gxbb-wetek: fix HDMI in early boot
Christian Hewitt [Tue, 12 Oct 2021 05:25:20 +0000 (05:25 +0000)]
arm64: dts: meson-gxbb-wetek: fix HDMI in early boot

[ Upstream commit 8182a35868db5f053111d5d9d4da8fcb3f99259d ]

Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
node to ensure HDMI is powered in the early stages of boot.

Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211012052522.30873-2-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: dts: amlogic: Fix SPI NOR flash node name for ODROID N2/N2+
Alexander Stein [Tue, 26 Oct 2021 18:28:13 +0000 (20:28 +0200)]
arm64: dts: amlogic: Fix SPI NOR flash node name for ODROID N2/N2+

[ Upstream commit 95d35256b564aca33fb661eac77dc94bfcffc8df ]

Fix the schema warning: "spi-flash@0: $nodename:0: 'spi-flash@0' does
 not match '^flash(@.*)?$'" from jedec,spi-nor.yaml

Fixes: a084eaf3096c ("arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211026182813.900775-3-alexander.stein@mailbox.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: dts: amlogic: meson-g12: Fix GPU operating point table node name
Alexander Stein [Tue, 26 Oct 2021 18:28:12 +0000 (20:28 +0200)]
arm64: dts: amlogic: meson-g12: Fix GPU operating point table node name

[ Upstream commit bb98a6fd0b0e227cefb2ba91cea2b55455f203b7 ]

Starting with commit 94274f20f6bf ("dt-bindings: opp: Convert to DT
schema") the opp node name has a mandatory pattern. This change
fixes the dtbs_check warning:
gpu-opp-table: $nodename:0: 'gpu-opp-table' does not match
'^opp-table(-[a-z0-9]+)?$'
Put the 'gpu' part at the end to match the pattern.

Fixes: 916a0edc43f0 ("arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211026182813.900775-2-alexander.stein@mailbox.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: aspeed: Update signal status immediately to ensure sane hw state
Jammy Huang [Tue, 9 Nov 2021 03:12:27 +0000 (03:12 +0000)]
media: aspeed: Update signal status immediately to ensure sane hw state

[ Upstream commit af6d1bde395cac174ee71adcd3fa43f6435c7206 ]

If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But
v4l2_input_status won't be updated to no-signal immediately until
aspeed_video_get_resolution() in aspeed_video_resolution_work().

During the period of time, aspeed_video_start_frame() could be called
because it doesn't know signal becomes unstable now. If it goes with
aspeed_video_init_regs() of aspeed_video_irq_res_change()
simultaneously, it will mess up hw state.

To fix this problem, v4l2_input_status is updated to no-signal
immediately for VE_INTERRUPT_MODE_DETECT_WD irq.

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: em28xx: fix memory leak in em28xx_init_dev
Dongliang Mu [Mon, 1 Nov 2021 09:55:39 +0000 (09:55 +0000)]
media: em28xx: fix memory leak in em28xx_init_dev

[ Upstream commit 22be5a10d0b24eec9e45decd15d7e6112b25f080 ]

In the em28xx_init_rev, if em28xx_audio_setup fails, this function fails
to deallocate the media_dev allocated in the em28xx_media_device_init.

Fix this by adding em28xx_unregister_media_device to free media_dev.

BTW, this patch is tested in my local syzkaller instance, and it can
prevent the memory leak from occurring again.

CC: Pavel Skripkin <paskripkin@gmail.com>
Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: aspeed: fix mode-detect always time out at 2nd run
Jammy Huang [Wed, 3 Nov 2021 08:23:54 +0000 (08:23 +0000)]
media: aspeed: fix mode-detect always time out at 2nd run

[ Upstream commit 62cea52ad4bead0ae4be2cfe1142eb0aae0e9fbd ]

aspeed_video_get_resolution() will try to do res-detect again if the
timing got in last try is invalid. But it will always time out because
VE_SEQ_CTRL_TRIG_MODE_DET is only cleared after 1st mode-detect.

To fix the problem, just clear VE_SEQ_CTRL_TRIG_MODE_DET before setting
it in aspeed_video_enable_mode_detect().

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: atomisp: fix uninitialized bug in gmin_get_pmic_id_and_addr()
Dan Carpenter [Tue, 12 Oct 2021 08:21:50 +0000 (09:21 +0100)]
media: atomisp: fix uninitialized bug in gmin_get_pmic_id_and_addr()

[ Upstream commit cb4d67a998e97365afdf34965b069601da1dae60 ]

The "power" pointer is not initialized on the else path and that would
lead to an Oops.

Link: https://lore.kernel.org/linux-media/20211012082150.GA31086@kili
Fixes: c30f4cb2d4c7 ("media: atomisp: Refactor PMIC detection to a separate function")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: atomisp: fix enum formats logic
Mauro Carvalho Chehab [Mon, 25 Oct 2021 08:06:52 +0000 (09:06 +0100)]
media: atomisp: fix enum formats logic

[ Upstream commit fae46cb0531b45c789e39128f676f2bafa3a7b47 ]

Changeset 374d62e7aa50 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
added an extra verification for a pads parameter for enum mbus
format code.

Such change broke atomisp, because now the V4L2 core
refuses to enum MBUS formats if the state is empty.

So, add .which field in order to select the active formats,
in order to make it work again.

While here, improve error messages.

Fixes: 374d62e7aa50 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: atomisp: add NULL check for asd obtained from atomisp_video_pipe
Tsuchiya Yuto [Sun, 17 Oct 2021 16:23:34 +0000 (01:23 +0900)]
media: atomisp: add NULL check for asd obtained from atomisp_video_pipe

[ Upstream commit c10bcb13462e9cf43111d17f1e08b4bb4d4401b0 ]

This is almost a BUG report with RFC patch that just avoids kernel
oopses. Thus, prefixed with [BUG][RFC].

Here is the kernel log after running `v4l2-compliance -d /dev/video4`
with this patch applied:

kern  :err   : [25507.580392] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern  :warn  : [25507.592343] isys dma store at addr(0xcd408) val(0)
kern  :err   : [25507.592995] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.593685] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.593719] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.593727] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
[omitting 42 same messages]
kern  :err   : [25507.593976] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.594191] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.594449] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
[omitting 43 same messages]
kern  :err   : [25507.594756] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.594779] atomisp-isp2 0000:00:03.0: atomisp_g_ctrl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.594787] atomisp-isp2 0000:00:03.0: atomisp_s_ctrl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.594803] atomisp-isp2 0000:00:03.0: atomisp_camera_g_ext_ctrls(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.594880] atomisp-isp2 0000:00:03.0: atomisp_enum_fmt_cap(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.594915] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.595058] atomisp-isp2 0000:00:03.0: atomisp_try_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.595089] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.595124] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.595221] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.595241] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.601571] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern  :warn  : [25507.607496] isys dma store at addr(0xcd408) val(0)
kern  :err   : [25507.608604] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.611988] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern  :warn  : [25507.617420] isys dma store at addr(0xcd408) val(0)
kern  :err   : [25507.618429] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.618811] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.622193] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern  :warn  : [25507.627355] isys dma store at addr(0xcd408) val(0)
kern  :err   : [25507.628391] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.631143] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern  :warn  : [25507.635813] isys dma store at addr(0xcd408) val(0)
kern  :err   : [25507.636489] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.636504] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.636516] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.639111] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern  :warn  : [25507.646152] isys dma store at addr(0xcd408) val(0)
kern  :err   : [25507.646831] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.646847] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.650079] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern  :warn  : [25507.657476] isys dma store at addr(0xcd408) val(0)
kern  :err   : [25507.658741] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.658759] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.658771] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern  :err   : [25507.660959] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern  :warn  : [25507.666665] isys dma store at addr(0xcd408) val(0)
kern  :err   : [25507.667397] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC

[mchehab: fix coding style]
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: atomisp: fix ifdefs in sh_css.c
Tsuchiya Yuto [Sun, 17 Oct 2021 16:19:47 +0000 (01:19 +0900)]
media: atomisp: fix ifdefs in sh_css.c

[ Upstream commit 5a1b2725558f8a3b4cbf0504f53cffae8e163034 ]

 ## `if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG) {` case

The intel-aero atomisp has `#if defined(IS_ISP_2400_SYSTEM)` [1]. It is
to be defined in the following two places [2]:

  - css/hive_isp_css_common/system_global.h
  - css/css_2401_csi2p_system/system_global.h

and the former file is to be included on ISP2400 devices, too. So, it
is to be defined for both ISP2400 and ISP2401 devices.

Because the upstreamed atomisp driver now supports only ISP2400 and
ISP2401, just remove the ISP version test again. This matches the other
upstream commits like 3c0538fbad9f ("media: atomisp: get rid of most
checks for ISP2401 version").

While here, moved the comment for define GP_ISEL_TPG_MODE to the
appropriate place.

[1] https://github.com/intel-aero/linux-kernel/blob/a1b673258feb915268377275130c5c5df0eafc82/drivers/media/pci/atomisp/css/sh_css.c#L552-L558
[2] https://github.com/intel-aero/linux-kernel/search?q=IS_ISP_2400_SYSTEM

  ## `isys_stream_descr->polling_mode` case

This does not exist on the intel-aero atomisp. This is because it is
based on css version irci_stable_candrpv_0415_20150521_0458.

On the other hand, the upstreamed atomisp is based on the following css
version depending on the ISP version using ifdefs:

  - ISP2400: irci_stable_candrpv_0415_20150521_0458
  - ISP2401: irci_master_20150911_0724

The `isys_stream_descr->polling_mode` usage was added on updating css
version to irci_master_20150701_0213 [3].

So, it is not a ISP version specific thing, but css version specific
thing. Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, re-add the ISP version check for now.

I say "for now" because ISP2401 should eventually use the same css
version with ISP2400 (i.e., irci_stable_candrpv_0415_20150521_0458)

[3] https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
    ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")
    Link to Intel's Android kernel patch.

 ## `coord = &me->config.internal_frame_origin_bqs_on_sctbl;` case

it was added on commit 4f744a573db3 ("media: atomisp: make
sh_css_sp_init_pipeline() ISP version independent") for ISP2401. Because
the upstreamed atomisp for the ISP2401 part is based on
irci_master_20150911_0724, hence the difference.

Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, revert the test back to `if (IS_ISP2401)`.

Fixes: 27333dadef57 ("media: atomisp: adjust some code at sh_css that could be broken")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: atomisp: fix inverted error check for ia_css_mipi_is_source_port_valid()
Tsuchiya Yuto [Sun, 17 Oct 2021 16:19:45 +0000 (01:19 +0900)]
media: atomisp: fix inverted error check for ia_css_mipi_is_source_port_valid()

[ Upstream commit d21ce8c2f7bf6d737b60c09f86db141b9e8e47f0 ]

The function ia_css_mipi_is_source_port_valid() returns true if the port
is valid. So, we can't use the existing err variable as is.

To fix this issue while reusing that variable, invert the return value
when assigning it to the variable.

Fixes: 3c0538fbad9f ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: atomisp: do not use err var when checking port validity for ISP2400
Tsuchiya Yuto [Sun, 17 Oct 2021 16:19:44 +0000 (01:19 +0900)]
media: atomisp: do not use err var when checking port validity for ISP2400

[ Upstream commit 9f6b4fa2d2dfbff4b8a57eeb39b1128a6094ee20 ]

Currently, the `port >= N_CSI_PORTS || err` checks for ISP2400 are always
evaluated as true because the err variable is set to `-EINVAL` on
declaration but the variable is never used until the evaluation.

Looking at the diff of commit 3c0538fbad9f ("media: atomisp: get rid of
most checks for ISP2401 version"), the `port >= N_CSI_PORTS` check is
for ISP2400 and the err variable check is for ISP2401. Fix this issue
by adding ISP version test there accordingly.

Fixes: 3c0538fbad9f ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: atomisp: fix inverted logic in buffers_needed()
Tsuchiya Yuto [Sun, 17 Oct 2021 16:19:43 +0000 (01:19 +0900)]
media: atomisp: fix inverted logic in buffers_needed()

[ Upstream commit e1921cd14640f0f4d1fad5eb8e448c58a536415d ]

When config.mode is IA_CSS_INPUT_MODE_BUFFERED_SENSOR, it rather needs
buffers. Fix it by inverting the return value.

Fixes: 3c0538fbad9f ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: atomisp: fix punit_ddr_dvfs_enable() argument for mrfld_power up case
Tsuchiya Yuto [Sun, 17 Oct 2021 16:19:42 +0000 (01:19 +0900)]
media: atomisp: fix punit_ddr_dvfs_enable() argument for mrfld_power up case

[ Upstream commit 5bfbf65fcca7325e4d89d289b3c286e11220e386 ]

When comparing with intel-aero atomisp [1], it looks like
punit_ddr_dvfs_enable() should take `false` as an argument on mrfld_power
up case.

Code from the intel-aero kernel [1]:

        int atomisp_mrfld_power_down(struct atomisp_device *isp)
        {
        [...]
/*WA:Enable DVFS*/
if (IS_CHT)
punit_ddr_dvfs_enable(true);

        int atomisp_mrfld_power_up(struct atomisp_device *isp)
        {
        [...]
/*WA for PUNIT, if DVFS enabled, ISP timeout observed*/
if (IS_CHT)
punit_ddr_dvfs_enable(false);

This patch fixes the inverted argument as per the intel-aero code, as
well as its comment. While here, fix space issues for comments in
atomisp_mrfld_power().

Note that it does not seem to be possible to unify the up/down cases for
punit_ddr_dvfs_enable(), i.e., we can't do something like the following:

        if (IS_CHT)
punit_ddr_dvfs_enable(!enable);

because according to the intel-aero code [1], the DVFS is disabled
before "writing 0x0 to ISPSSPM0 bit[1:0]" and the DVFS is enabled after
"writing 0x3 to ISPSSPM0 bit[1:0]".

[1] https://github.com/intel-aero/linux-kernel/blob/a1b673258feb915268377275130c5c5df0eafc82/drivers/media/pci/atomisp/atomisp_driver/atomisp_v4l2.c#L431-L514

Fixes: 0f441fd70b1e ("media: atomisp: simplify the power down/up code")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: atomisp: add missing media_device_cleanup() in atomisp_unregister_entities()
Tsuchiya Yuto [Sun, 17 Oct 2021 16:19:41 +0000 (01:19 +0900)]
media: atomisp: add missing media_device_cleanup() in atomisp_unregister_entities()

[ Upstream commit ce3015b7212e96db426d0c36f80fd159c91155d1 ]

After the commit 9832e155f1ed ("[media] media-device: split media
initialization and registration"), calling media_device_cleanup()
is needed it seems. However, currently it is missing for the module
unload path.

Note that for the probe failure path, it is already added in
atomisp_register_entities().

This patch adds the missing call of media_device_cleanup() in
atomisp_unregister_entities().

Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomedia: videobuf2: Fix the size printk format
Dillon Min [Tue, 19 Oct 2021 08:43:19 +0000 (09:43 +0100)]
media: videobuf2: Fix the size printk format

[ Upstream commit c9ee220d76775e42f35d634479c978d9350077d3 ]

Since the type of parameter size is unsigned long,
it should printk by %lu, instead of %ld, fix it.

Fixes: 7952be9b6ece ("media: drivers/media/common/videobuf2: rename from videobuf")
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomtd: hyperbus: rpc-if: Check return value of rpcif_sw_init()
Lad Prabhakar [Mon, 25 Oct 2021 20:56:28 +0000 (21:56 +0100)]
mtd: hyperbus: rpc-if: Check return value of rpcif_sw_init()

[ Upstream commit 981387ed06b96908223a607f5fba6efa42728fc2 ]

rpcif_sw_init() can fail so make sure we check the return value
of it and on error exit rpcif_hb_probe() callback with error code.

Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211025205631.21151-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agobpftool: Fix memory leak in prog_dump()
Quentin Monnet [Wed, 10 Nov 2021 11:46:27 +0000 (11:46 +0000)]
bpftool: Fix memory leak in prog_dump()

[ Upstream commit ebbd7f64a3fbe9e0f235e39fc244ee9735e2a52a ]

Following the extraction of prog_dump() from do_dump(), the struct btf
allocated in prog_dump() is no longer freed on error; the struct
bpf_prog_linfo is not freed at all. Make sure we release them before
exiting the function.

Fixes: ec2025095cf6 ("bpftool: Match several programs with same tag")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-2-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoath11k: Send PPDU_STATS_CFG with proper pdev mask to firmware
Rameshkumar Sundaram [Wed, 10 Nov 2021 15:10:48 +0000 (17:10 +0200)]
ath11k: Send PPDU_STATS_CFG with proper pdev mask to firmware

[ Upstream commit 16a2c3d5406f95ef6139de52669c60a39443f5f7 ]

HTT_PPDU_STATS_CFG_PDEV_ID bit mask for target FW PPDU stats request message
was set as bit 8 to 15. Bit 8 is reserved for soc stats and pdev id starts from
bit 9. Hence change the bitmask as bit 9 to 15 and fill the proper pdev id in
the request message.

In commit 701e48a43e15 ("ath11k: add packet log support for QCA6390"), both
HTT_PPDU_STATS_CFG_PDEV_ID and pdev_mask were changed, but this pdev_mask
calculation is not valid for platforms which has multiple pdevs with 1 rxdma
per pdev, as this is writing same value(i.e. 2) for all pdevs.  Hence fixed it
to consider pdev_idx as well, to make it compatible for both single and multi
pd cases.

Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
Tested on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1

Fixes: 701e48a43e15 ("ath11k: add packet log support for QCA6390")

Co-developed-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Rameshkumar Sundaram <ramess@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-10-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agowcn36xx: fix RX BD rate mapping for 5GHz legacy rates
Benjamin Li [Thu, 4 Nov 2021 01:05:48 +0000 (18:05 -0700)]
wcn36xx: fix RX BD rate mapping for 5GHz legacy rates

[ Upstream commit cfdf6b19e750f7de8ae71a26932f63b52e3bf74c ]

The linear mapping between the BD rate field and the driver's 5GHz
legacy rates table (wcn_5ghz_rates) does not only apply for the latter
four rates -- it applies to all eight rates.

Fixes: 6ea131acea98 ("wcn36xx: Fix warning due to bad rate_idx")
Signed-off-by: Benjamin Li <benl@squareup.com>
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211104010548.1107405-3-benl@squareup.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agowcn36xx: populate band before determining rate on RX
Benjamin Li [Thu, 4 Nov 2021 01:05:47 +0000 (18:05 -0700)]
wcn36xx: populate band before determining rate on RX

[ Upstream commit c9c5608fafe4dae975c9644c7d14c51ad3b0ed73 ]

status.band is used in determination of status.rate -- for 5GHz on legacy
rates there is a linear shift between the BD descriptor's rate field and
the wcn36xx driver's rate table (wcn_5ghz_rates).

We have a special clause to populate status.band for hardware scan offload
frames. However, this block occurs after status.rate is already populated.
Correctly handle this dependency by moving the band block before the rate
block.

This patch addresses kernel warnings & missing scan results for 5GHz APs
that send their beacons/probe responses at the higher four legacy rates
(24-54 Mbps), when using hardware scan offload:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4532 ieee80211_rx_napi+0x744/0x8d8
  Modules linked in: wcn36xx [...]
  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         4.19.107-g73909fa #1
  Hardware name: Square, Inc. T2 (all variants) (DT)
  Call trace:
  dump_backtrace+0x0/0x148
  show_stack+0x14/0x1c
  dump_stack+0xb8/0xf0
  __warn+0x2ac/0x2d8
  warn_slowpath_null+0x44/0x54
  ieee80211_rx_napi+0x744/0x8d8
  ieee80211_tasklet_handler+0xa4/0xe0
  tasklet_action_common+0xe0/0x118
  tasklet_action+0x20/0x28
  __do_softirq+0x108/0x1ec
  irq_exit+0xd4/0xd8
  __handle_domain_irq+0x84/0xbc
  gic_handle_irq+0x4c/0xb8
  el1_irq+0xe8/0x190
  lpm_cpuidle_enter+0x220/0x260
  cpuidle_enter_state+0x114/0x1c0
  cpuidle_enter+0x34/0x48
  do_idle+0x150/0x268
  cpu_startup_entry+0x20/0x24
  rest_init+0xd4/0xe0
  start_kernel+0x398/0x430
  ---[ end trace ae28cb759352b403 ]---

Fixes: 8a27ca394782 ("wcn36xx: Correct band/freq reporting on RX")
Signed-off-by: Benjamin Li <benl@squareup.com>
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211104010548.1107405-2-benl@squareup.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agowcn36xx: Put DXE block into reset before freeing memory
Bryan O'Donoghue [Fri, 5 Nov 2021 12:21:52 +0000 (12:21 +0000)]
wcn36xx: Put DXE block into reset before freeing memory

[ Upstream commit ed04ea76e69e7194f7489cebe23a32a68f39218d ]

When deiniting the DXE hardware we should reset the block to ensure there
is no spurious DMA write transaction from the downstream WCNSS to upstream
MSM at a skbuff address we will have released.

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-4-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agowcn36xx: Release DMA channel descriptor allocations
Bryan O'Donoghue [Fri, 5 Nov 2021 12:21:51 +0000 (12:21 +0000)]
wcn36xx: Release DMA channel descriptor allocations

[ Upstream commit 3652096e5263ad67604b0323f71d133485f410e5 ]

When unloading the driver we are not releasing the DMA descriptors which we
previously allocated.

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-3-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agowcn36xx: Fix DMA channel enable/disable cycle
Bryan O'Donoghue [Fri, 5 Nov 2021 12:21:50 +0000 (12:21 +0000)]
wcn36xx: Fix DMA channel enable/disable cycle

[ Upstream commit 89dcb1da611d9b3ff0728502d58372fdaae9ebff ]

Right now we have a broken sequence where we enable DMA channel interrupts
which can be left enabled and never disabled if we hit an error path.

Worse still when we unload the driver, the DMA channel interrupt bits are
left intact. About the only saving grace here is that we do remember to
disable the wcnss interrupt when unload the driver.

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-2-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agolibbpf: Free up resources used by inner map definition
Andrii Nakryiko [Sun, 7 Nov 2021 16:55:14 +0000 (08:55 -0800)]
libbpf: Free up resources used by inner map definition

[ Upstream commit 8f7b239ea8cfdc8e64c875ee417fed41431a1f37 ]

It's not enough to just free(map->inner_map), as inner_map itself can
have extra memory allocated, like map name.

Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-3-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/vc4: hdmi: Enable the scrambler on reconnection
Maxime Ripard [Mon, 25 Oct 2021 15:29:02 +0000 (17:29 +0200)]
drm/vc4: hdmi: Enable the scrambler on reconnection

[ Upstream commit b7551457c5d0b3505b0be247d47919c1ee30506d ]

If we have a state already and disconnect/reconnect the display, the
SCDC messages won't be sent again since we didn't go through a disable /
enable cycle.

In order to fix this, let's call the vc4_hdmi_enable_scrambling function
in the detect callback if there is a mode and it needs the scrambler to
be enabled.

Fixes: c85695a2016e ("drm/vc4: hdmi: Enable the scrambler")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-10-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agowcn36xx: Indicate beacon not connection loss on MISSED_BEACON_IND
Bryan O'Donoghue [Wed, 27 Oct 2021 23:25:29 +0000 (00:25 +0100)]
wcn36xx: Indicate beacon not connection loss on MISSED_BEACON_IND

[ Upstream commit 588b45c88ae130fe373a8c50edaf54735c3f4fe3 ]

Firmware can trigger a missed beacon indication, this is not the same as a
lost signal.

Flag to Linux the missed beacon and let the WiFi stack decide for itself if
the link is up or down by sending its own probe to determine this.

We should only be signalling the link is lost when the firmware indicates

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211027232529.657764-1-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agowcn36xx: ensure pairing of init_scan/finish_scan and start_scan/end_scan
Benjamin Li [Wed, 27 Oct 2021 17:03:05 +0000 (10:03 -0700)]
wcn36xx: ensure pairing of init_scan/finish_scan and start_scan/end_scan

[ Upstream commit 8f1ba8b0ee2679f0b3d22d2a5c1bc70c436fd872 ]

An SMD capture from the downstream prima driver on WCN3680B shows the
following command sequence for connected scans:

- init_scan_req
    - start_scan_req, channel 1
    - end_scan_req, channel 1
    - start_scan_req, channel 2
    - ...
    - end_scan_req, channel 3
- finish_scan_req
- init_scan_req
    - start_scan_req, channel 4
    - ...
    - end_scan_req, channel 6
- finish_scan_req
- ...
    - end_scan_req, channel 165
- finish_scan_req

Upstream currently never calls wcn36xx_smd_end_scan, and in some cases[1]
still sends finish_scan_req twice in a row or before init_scan_req. A
typical connected scan looks like this:

- init_scan_req
    - start_scan_req, channel 1
- finish_scan_req
- init_scan_req
    - start_scan_req, channel 2
- ...
    - start_scan_req, channel 165
- finish_scan_req
- finish_scan_req

This patch cleans up scanning so that init/finish and start/end are always
paired together and correctly nested.

- init_scan_req
    - start_scan_req, channel 1
    - end_scan_req, channel 1
- finish_scan_req
- init_scan_req
    - start_scan_req, channel 2
    - end_scan_req, channel 2
- ...
    - start_scan_req, channel 165
    - end_scan_req, channel 165
- finish_scan_req

Note that upstream will not do batching of 3 active-probe scans before
returning to the operating channel, and this patch does not change that.
To match downstream in this aspect, adjust IEEE80211_PROBE_DELAY and/or
the 125ms max off-channel time in ieee80211_scan_state_decision.

[1]: commit d195d7aac09b ("wcn36xx: Ensure finish scan is not requested
before start scan") addressed one case of finish_scan_req being sent
without a preceding init_scan_req (the case of the operating channel
coinciding with the first scan channel); two other cases are:
1) if SW scan is started and aborted immediately, without scanning any
   channels, we send a finish_scan_req without ever sending init_scan_req,
   and
2) as SW scan logic always returns us to the operating channel before
   calling wcn36xx_sw_scan_complete, finish_scan_req is always sent twice
   at the end of a SW scan

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Benjamin Li <benl@squareup.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211027170306.555535-4-benl@squareup.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/vc4: crtc: Make sure the HDMI controller is powered when disabling
Maxime Ripard [Thu, 23 Sep 2021 18:50:13 +0000 (20:50 +0200)]
drm/vc4: crtc: Make sure the HDMI controller is powered when disabling

[ Upstream commit bca10db67bdaf15997a5a2a276e7aa9b6eea1393 ]

Since commit 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
time"), during the initial setup of the driver we call into the VC4 HDMI
controller hooks to make sure the controller is properly disabled.

However, we were never making sure that the device was properly powered
while doing so. This never resulted in any (reported) issue in practice,
but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
if we access the controller while disabled") we get a loud complaint
when we do that kind of access.

Let's make sure we have the HDMI controller properly powered while
disabling it.

Fixes: 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923185013.826679-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/vc4: hdmi: Rework the pre_crtc_configure error handling
Maxime Ripard [Thu, 19 Aug 2021 13:59:28 +0000 (15:59 +0200)]
drm/vc4: hdmi: Rework the pre_crtc_configure error handling

[ Upstream commit caa51a4c11f1cadba9bcf61ed9e0105711952ce7 ]

Since our pre_crtc_configure hook returned void, we didn't implement a
goto-based error path handling, leading to errors like failing to put
back the device in pm_runtime in all the error paths, but also failing
to disable the pixel clock if clk_set_min_rate on the HSM clock fails.

Move to a goto-based implementation to have an easier consitency.

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-4-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/vc4: hdmi: Make sure the controller is powered up during bind
Maxime Ripard [Thu, 19 Aug 2021 13:59:27 +0000 (15:59 +0200)]
drm/vc4: hdmi: Make sure the controller is powered up during bind

[ Upstream commit 9c6e4f6ed1d61d5f46946e5c151ceb279eedadb1 ]

In the bind hook, we actually need the device to have the HSM clock
running during the final part of the display initialisation where we
reset the controller and initialise the CEC component.

Failing to do so will result in a complete, silent, hang of the CPU.

Fixes: 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-3-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/vc4: hdmi: Make sure the controller is powered in detect
Maxime Ripard [Wed, 22 Sep 2021 12:54:19 +0000 (14:54 +0200)]
drm/vc4: hdmi: Make sure the controller is powered in detect

[ Upstream commit 0f5251339eda7f7eb7bd4467607ae1d01b24e129 ]

If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-6-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/vc4: hdmi: Move the HSM clock enable to runtime_pm
Maxime Ripard [Wed, 22 Sep 2021 12:54:18 +0000 (14:54 +0200)]
drm/vc4: hdmi: Move the HSM clock enable to runtime_pm

[ Upstream commit c86b41214362e8e715e1343e16d5d6af0562db05 ]

In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.

Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.

Since we also want to change the HSM clock rate and it's only valid
while the clock is disabled, we need to move the clk_set_min_rate() call
on the HSM clock above pm_runtime_get_and_sync().

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-5-maxime@cerno.tech
Link: https://lore.kernel.org/linux-arm-kernel/20210924152334.1342630-1-maxime@cerno.tech/
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/vc4: hdmi: Set a default HSM rate
Maxime Ripard [Wed, 22 Sep 2021 12:54:17 +0000 (14:54 +0200)]
drm/vc4: hdmi: Set a default HSM rate

[ Upstream commit 3e85b81591609bb794bb00cd619b20965b5b38cd ]

When the firmware doesn't setup the HSM rate (such as when booting
without an HDMI cable plugged in), its rate is 0 and thus any register
access results in a CPU stall, even though HSM is enabled.

Let's enforce a minimum rate at boot to avoid this issue.

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-4-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: bcm-2835: Remove rounding up the dividers
Maxime Ripard [Wed, 22 Sep 2021 12:54:16 +0000 (14:54 +0200)]
clk: bcm-2835: Remove rounding up the dividers

[ Upstream commit 8ca011ef4af48a7af7b15afd8a4a44039dd04cea ]

The driver, once it found a divider, tries to round it up by increasing
the least significant bit of the fractional part by one when the
round_up argument is set and there's a remainder.

However, since it increases the divider it will actually reduce the
clock rate below what we were asking for, leading to issues with
clk_set_min_rate() that will complain that our rounded clock rate is
below the minimum of the rate.

Since the dividers are fairly precise already, let's remove that part so
that we can have clk_set_min_rate() working.

This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round
up ability to the clock divisor").

Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: bcm-2835: Pick the closest clock rate
Maxime Ripard [Wed, 22 Sep 2021 12:54:15 +0000 (14:54 +0200)]
clk: bcm-2835: Pick the closest clock rate

[ Upstream commit 5517357a4733d7cf7c17fc79d0530cfa47add372 ]

The driver currently tries to pick the closest rate that is lower than
the rate being requested.

This causes an issue with clk_set_min_rate() since it actively checks
for the rounded rate to be above the minimum that was just set.

Let's change the logic a bit to pick the closest rate to the requested
rate, no matter if it's actually higher or lower.

Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoBluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails
Wang Hai [Mon, 25 Oct 2021 13:10:12 +0000 (21:10 +0800)]
Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails

[ Upstream commit 2a7ca7459d905febf519163bd9e3eed894de6bb7 ]

I got a kernel BUG report when doing fault injection test:

------------[ cut here ]------------
kernel BUG at lib/list_debug.c:45!
...
RIP: 0010:__list_del_entry_valid.cold+0x12/0x4d
...
Call Trace:
 proto_unregister+0x83/0x220
 cmtp_cleanup_sockets+0x37/0x40 [cmtp]
 cmtp_exit+0xe/0x1f [cmtp]
 do_syscall_64+0x35/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

If cmtp_init_sockets() in cmtp_init() fails, cmtp_init() still returns
success. This will cause a kernel bug when accessing uncreated ctmp
related data when the module exits.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoBluetooth: virtio_bt: fix memory leak in virtbt_rx_handle()
Soenke Huster [Wed, 20 Oct 2021 08:14:44 +0000 (10:14 +0200)]
Bluetooth: virtio_bt: fix memory leak in virtbt_rx_handle()

[ Upstream commit 1d0688421449718c6c5f46e458a378c9b530ba18 ]

On the reception of packets with an invalid packet type, the memory of
the allocated socket buffers is never freed. Add a default case that frees
these to avoid a memory leak.

Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/rockchip: dsi: Reconfigure hardware on resume()
Brian Norris [Tue, 28 Sep 2021 21:35:50 +0000 (14:35 -0700)]
drm/rockchip: dsi: Reconfigure hardware on resume()

commit e584cdc1549932f87a2707b56bc588cfac5d89e0 upstream.

Since commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we perform most HW configuration in the bind()
function. This configuration may be lost on suspend/resume, so we
need to call it again. That may lead to errors like this after system
suspend/resume:

  dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
  panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110

Tested on Acer Chromebook Tab 10 (RK3399 Gru-Scarlet).

Note that early mailing list versions of this driver borrowed Rockchip's
downstream/BSP solution, to do HW configuration in mode_set() (which
*is* called at the appropriate pre-enable() times), but that was
discarded along the way. I've avoided that still, because mode_set()
documentation doesn't suggest this kind of purpose as far as I can tell.

Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.2.I4e9d93aadb00b1ffc7d506e3186a25492bf0b732@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agodrm/rockchip: dsi: Disable PLL clock on bind error
Brian Norris [Tue, 28 Sep 2021 21:35:52 +0000 (14:35 -0700)]
drm/rockchip: dsi: Disable PLL clock on bind error

[ Upstream commit 5a614570172e1c9f59035d259dd735acd4f1c01b ]

Fix some error handling here noticed in review of other changes.

Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.4.I8bb7a91ecc411d56bc155763faa15f289d7fc074@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/rockchip: dsi: Hold pm-runtime across bind/unbind
Brian Norris [Tue, 28 Sep 2021 21:35:49 +0000 (14:35 -0700)]
drm/rockchip: dsi: Hold pm-runtime across bind/unbind

commit 514db871922f103886ad4d221cf406b4fcc5e74a upstream.

In commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we moved most HW configuration to bind(), but we
didn't move the runtime PM management. Therefore, depending on initial
boot state, runtime-PM workqueue delays, and other timing factors, we
may disable our power domain in between the hardware configuration
(bind()) and when we enable the display. This can cause us to lose
hardware state and fail to configure our display. For example:

  dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
  panel-innolux-p079zca ff960000.mipi.0: failed to write command 0

or:

  dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
  panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110

We should match the runtime PM to the lifetime of the bind()/unbind()
cycle.

Tested on Acer Chrometab 10 (RK3399 Gru-Scarlet), with panel drivers
built either as modules or built-in.

Side notes: it seems one is more likely to see this problem when the
panel driver is built into the kernel. I've also seen this problem
bisect down to commits that simply changed Kconfig dependencies, because
it changed the order in which driver init functions were compiled into
the kernel, and therefore the ordering and timing of built-in device
probe.

Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Link: https://lore.kernel.org/linux-rockchip/9aedfb528600ecf871885f7293ca4207c84d16c1.camel@gmail.com/
Reported-by: <aleksandr.o.makarov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.1.Ic2904d37f30013a7f3d8476203ad3733c186827e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agodrm/rockchip: dsi: Fix unbalanced clock on probe error
Brian Norris [Tue, 28 Sep 2021 21:35:51 +0000 (14:35 -0700)]
drm/rockchip: dsi: Fix unbalanced clock on probe error

[ Upstream commit 251888398753924059f3bb247a44153a2853137f ]

Our probe() function never enabled this clock, so we shouldn't disable
it if we fail to probe the bridge.

Noted by inspection.

Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.3.Ie8ceefb51ab6065a1151869b6fcda41a467d4d2c@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/panel: innolux-p079zca: Delete panel on attach() failure
Brian Norris [Fri, 24 Sep 2021 00:33:54 +0000 (17:33 -0700)]
drm/panel: innolux-p079zca: Delete panel on attach() failure

[ Upstream commit 32a267e9c057e1636e7afdd20599aa5741a73079 ]

If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.

This problem exists since the driver's introduction, but is especially
relevant after refactored for dual-DSI variants.

Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver")
Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/panel: kingdisplay-kd097d04: Delete panel on attach() failure
Brian Norris [Fri, 24 Sep 2021 00:33:53 +0000 (17:33 -0700)]
drm/panel: kingdisplay-kd097d04: Delete panel on attach() failure

[ Upstream commit 5f31dbeae8a88f31c3eb4eb526ab4807c40da241 ]

If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.

Fixes: 2a994cbed6b2 ("drm/panel: Add Kingdisplay KD097D04 panel driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.1.Icb4d9dbc1817f4e826361a4f1cea7461541668f0@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm: fix null-ptr-deref in drm_dev_init_release()
Wang Hai [Wed, 13 Oct 2021 11:41:39 +0000 (19:41 +0800)]
drm: fix null-ptr-deref in drm_dev_init_release()

[ Upstream commit acf20ed020ffa4d6cc8347e8d356509b95df3cbe ]

I got a null-ptr-deref report:

[drm:drm_dev_init [drm]] *ERROR* Cannot allocate anonymous inode: -12
==================================================================
BUG: KASAN: null-ptr-deref in iput+0x3c/0x4a0
...
Call Trace:
 dump_stack_lvl+0x6c/0x8b
 kasan_report.cold+0x64/0xdb
 __asan_load8+0x69/0x90
 iput+0x3c/0x4a0
 drm_dev_init_release+0x39/0xb0 [drm]
 drm_managed_release+0x158/0x2d0 [drm]
 drm_dev_init+0x3a7/0x4c0 [drm]
 __devm_drm_dev_alloc+0x55/0xd0 [drm]
 mi0283qt_probe+0x8a/0x2b5 [mi0283qt]
 spi_probe+0xeb/0x130
...
 entry_SYSCALL_64_after_hwframe+0x44/0xae

If drm_fs_inode_new() fails in drm_dev_init(), dev->anon_inode will point
to PTR_ERR(...) instead of NULL. This will result in null-ptr-deref when
drm_fs_inode_free(dev->anon_inode) is called.

drm_dev_init()
drm_fs_inode_new() // fail, dev->anon_inode = PTR_ERR(...)
drm_managed_release()
drm_dev_init_release()
drm_fs_inode_free() // access non-existent anon_inode

Define a temp variable and assign it to dev->anon_inode if the temp
variable is not PTR_ERR.

Fixes: 2cbf7fc6718b ("drm: Use drmm_ for drm_dev_init cleanup")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013114139.4042207-1-wanghai38@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/bridge: display-connector: fix an uninitialized pointer in probe()
Dan Carpenter [Wed, 13 Oct 2021 08:08:25 +0000 (11:08 +0300)]
drm/bridge: display-connector: fix an uninitialized pointer in probe()

[ Upstream commit 189723fbe9aca18d6f7d638c59a40288030932b5 ]

The "label" pointer is used for debug output.  The code assumes that it
is either NULL or valid, but it is never set to NULL.  It is either
valid or uninitialized.

Fixes: 0c275c30176b ("drm/bridge: Add bridge driver for display connectors")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013080825.GE6010@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoBluetooth: L2CAP: Fix not initializing sk_peer_pid
Luiz Augusto von Dentz [Thu, 7 Oct 2021 20:26:25 +0000 (13:26 -0700)]
Bluetooth: L2CAP: Fix not initializing sk_peer_pid

[ Upstream commit f5ff291098f70a70b344df1e388596755c3c8315 ]

In order to group sockets being connected using L2CAP_MODE_EXT_FLOWCTL
the pid is used but sk_peer_pid was not being initialized as it is
currently only done for af_unix.

Fixes: b48596d1dc25 ("Bluetooth: L2CAP: Add get_peer_pid callback")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodrm/ttm: Put BO in its memory manager's lru list
xinhui pan [Wed, 10 Nov 2021 04:31:48 +0000 (12:31 +0800)]
drm/ttm: Put BO in its memory manager's lru list

commit 781050b0a3164934857c300bb0bc291e38c26b6f upstream.

After we move BO to a new memory region, we should put it to
the new memory manager's lru list regardless we unlock the resv or not.

Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110043149.57554-1-xinhui.pan@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoshmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode
Gang Li [Fri, 14 Jan 2022 22:05:23 +0000 (14:05 -0800)]
shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode

commit 62c9827cbb996c2c04f615ecd783ce28bcea894b upstream.

Fix a data race in commit 779750d20b93 ("shmem: split huge pages beyond
i_size under memory pressure").

Here are call traces causing race:

   Call Trace 1:
     shmem_unused_huge_shrink+0x3ae/0x410
     ? __list_lru_walk_one.isra.5+0x33/0x160
     super_cache_scan+0x17c/0x190
     shrink_slab.part.55+0x1ef/0x3f0
     shrink_node+0x10e/0x330
     kswapd+0x380/0x740
     kthread+0xfc/0x130
     ? mem_cgroup_shrink_node+0x170/0x170
     ? kthread_create_on_node+0x70/0x70
     ret_from_fork+0x1f/0x30

   Call Trace 2:
     shmem_evict_inode+0xd8/0x190
     evict+0xbe/0x1c0
     do_unlinkat+0x137/0x330
     do_syscall_64+0x76/0x120
     entry_SYSCALL_64_after_hwframe+0x3d/0xa2

A simple explanation:

Image there are 3 items in the local list (@list).  In the first
traversal, A is not deleted from @list.

  1)    A->B->C
        ^
        |
        pos (leave)

In the second traversal, B is deleted from @list.  Concurrently, A is
deleted from @list through shmem_evict_inode() since last reference
counter of inode is dropped by other thread.  Then the @list is corrupted.

  2)    A->B->C
        ^  ^
        |  |
     evict pos (drop)

We should make sure the inode is either on the global list or deleted from
any local list before iput().

Fixed by moving inodes back to global list before we put them.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20211125064502.99983-1-ligang.bdlg@bytedance.com
Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoath11k: add string type to search board data in board-2.bin for WCN6855
Wen Gong [Mon, 15 Nov 2021 09:29:55 +0000 (11:29 +0200)]
ath11k: add string type to search board data in board-2.bin for WCN6855

commit fc95d10ac41d75c14a81afcc8722333d8b2cf80f upstream.

Currently ath11k only support string type with bus, chip id and board id
such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for ahb bus chip and
"bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCIe bus chip in
board-2.bin. For WCN6855, it is not enough to distinguish all different
chips.

This is to add a new string type which include bus, chip id, board id,
vendor, device, subsystem-vendor and subsystem-device for WCN6855.

ath11k will first load board-2.bin and search in it for the board data
with the above parameters, if matched one board data, then download it
to firmware, if not matched any one, then ath11k will download the file
board.bin to firmware.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211111065340.20187-1-quic_wgong@quicinc.com
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomm/page_alloc.c: do not warn allocation failure on zone DMA if no managed pages
Baoquan He [Fri, 14 Jan 2022 22:07:44 +0000 (14:07 -0800)]
mm/page_alloc.c: do not warn allocation failure on zone DMA if no managed pages

commit c4dc63f0032c77464fbd4e7a6afc22fa6913c4a7 upstream.

In kdump kernel of x86_64, page allocation failure is observed:

 kworker/u2:2: page allocation failure: order:0, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
 CPU: 0 PID: 55 Comm: kworker/u2:2 Not tainted 5.16.0-rc4+ #5
 Hardware name: AMD Dinar/Dinar, BIOS RDN1505B 06/05/2013
 Workqueue: events_unbound async_run_entry_fn
 Call Trace:
  <TASK>
  dump_stack_lvl+0x48/0x5e
  warn_alloc.cold+0x72/0xd6
  __alloc_pages_slowpath.constprop.0+0xc69/0xcd0
  __alloc_pages+0x1df/0x210
  new_slab+0x389/0x4d0
  ___slab_alloc+0x58f/0x770
  __slab_alloc.constprop.0+0x4a/0x80
  kmem_cache_alloc_trace+0x24b/0x2c0
  sr_probe+0x1db/0x620
  ......
  device_add+0x405/0x920
  ......
  __scsi_add_device+0xe5/0x100
  ata_scsi_scan_host+0x97/0x1d0
  async_run_entry_fn+0x30/0x130
  process_one_work+0x1e8/0x3c0
  worker_thread+0x50/0x3b0
  ? rescuer_thread+0x350/0x350
  kthread+0x16b/0x190
  ? set_kthread_struct+0x40/0x40
  ret_from_fork+0x22/0x30
  </TASK>
 Mem-Info:
 ......

The above failure happened when calling kmalloc() to allocate buffer with
GFP_DMA.  It requests to allocate slab page from DMA zone while no managed
pages at all in there.

 sr_probe()
 --> get_capabilities()
     --> buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);

Because in the current kernel, dma-kmalloc will be created as long as
CONFIG_ZONE_DMA is enabled.  However, kdump kernel of x86_64 doesn't have
managed pages on DMA zone since commit 6f599d84231f ("x86/kdump: Always
reserve the low 1M when the crashkernel option is specified").  The
failure can be always reproduced.

For now, let's mute the warning of allocation failure if requesting pages
from DMA zone while no managed pages.

[akpm@linux-foundation.org: fix warning]

Link: https://lkml.kernel.org/r/20211223094435.248523-4-bhe@redhat.com
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agodma/pool: create dma atomic pool only if dma zone has managed pages
Baoquan He [Fri, 14 Jan 2022 22:07:41 +0000 (14:07 -0800)]
dma/pool: create dma atomic pool only if dma zone has managed pages

commit a674e48c5443d12a8a43c3ac42367aa39505d506 upstream.

Currently three dma atomic pools are initialized as long as the relevant
kernel codes are built in.  While in kdump kernel of x86_64, this is not
right when trying to create atomic_pool_dma, because there's no managed
pages in DMA zone.  In the case, DMA zone only has low 1M memory
presented and locked down by memblock allocator.  So no pages are added
into buddy of DMA zone.  Please check commit f1d4d47c5851 ("x86/setup:
Always reserve the first 1M of RAM").

Then in kdump kernel of x86_64, it always prints below failure message:

 DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
 swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-0.rc5.20210611git929d931f2b40.42.fc35.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R910/0P658H, BIOS 2.12.0 06/04/2018
 Call Trace:
  dump_stack+0x7f/0xa1
  warn_alloc.cold+0x72/0xd6
  __alloc_pages_slowpath.constprop.0+0xf29/0xf50
  __alloc_pages+0x24d/0x2c0
  alloc_page_interleave+0x13/0xb0
  atomic_pool_expand+0x118/0x210
  __dma_atomic_pool_init+0x45/0x93
  dma_atomic_pool_init+0xdb/0x176
  do_one_initcall+0x67/0x320
  kernel_init_freeable+0x290/0x2dc
  kernel_init+0xa/0x111
  ret_from_fork+0x22/0x30
 Mem-Info:
 ......
 DMA: failed to allocate 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocation
 DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations

Here, let's check if DMA zone has managed pages, then create
atomic_pool_dma if yes.  Otherwise just skip it.

Link: https://lkml.kernel.org/r/20211223094435.248523-3-bhe@redhat.com
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomm_zone: add function to check if managed dma zone exists
Baoquan He [Fri, 14 Jan 2022 22:07:37 +0000 (14:07 -0800)]
mm_zone: add function to check if managed dma zone exists

commit 62b3107073646e0946bd97ff926832bafb846d17 upstream.

Patch series "Handle warning of allocation failure on DMA zone w/o
managed pages", v4.

**Problem observed:
On x86_64, when crash is triggered and entering into kdump kernel, page
allocation failure can always be seen.

 ---------------------------------
 DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
 swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
 CPU: 0 PID: 1 Comm: swapper/0
 Call Trace:
  dump_stack+0x7f/0xa1
  warn_alloc.cold+0x72/0xd6
  ......
  __alloc_pages+0x24d/0x2c0
  ......
  dma_atomic_pool_init+0xdb/0x176
  do_one_initcall+0x67/0x320
  ? rcu_read_lock_sched_held+0x3f/0x80
  kernel_init_freeable+0x290/0x2dc
  ? rest_init+0x24f/0x24f
  kernel_init+0xa/0x111
  ret_from_fork+0x22/0x30
 Mem-Info:
 ------------------------------------

***Root cause:
In the current kernel, it assumes that DMA zone must have managed pages
and try to request pages if CONFIG_ZONE_DMA is enabled. While this is not
always true. E.g in kdump kernel of x86_64, only low 1M is presented and
locked down at very early stage of boot, so that this low 1M won't be
added into buddy allocator to become managed pages of DMA zone. This
exception will always cause page allocation failure if page is requested
from DMA zone.

***Investigation:
This failure happens since below commit merged into linus's tree.
  1a6a9044b967 x86/setup: Remove CONFIG_X86_RESERVE_LOW and reservelow= options
  23721c8e92f7 x86/crash: Remove crash_reserve_low_1M()
  f1d4d47c5851 x86/setup: Always reserve the first 1M of RAM
  7c321eb2b843 x86/kdump: Remove the backup region handling
  6f599d84231f x86/kdump: Always reserve the low 1M when the crashkernel option is specified

Before them, on x86_64, the low 640K area will be reused by kdump kernel.
So in kdump kernel, the content of low 640K area is copied into a backup
region for dumping before jumping into kdump. Then except of those firmware
reserved region in [0, 640K], the left area will be added into buddy
allocator to become available managed pages of DMA zone.

However, after above commits applied, in kdump kernel of x86_64, the low
1M is reserved by memblock, but not released to buddy allocator. So any
later page allocation requested from DMA zone will fail.

At the beginning, if crashkernel is reserved, the low 1M need be locked
down because AMD SME encrypts memory making the old backup region
mechanims impossible when switching into kdump kernel.

Later, it was also observed that there are BIOSes corrupting memory
under 1M. To solve this, in commit f1d4d47c5851, the entire region of
low 1M is always reserved after the real mode trampoline is allocated.

Besides, recently, Intel engineer mentioned their TDX (Trusted domain
extensions) which is under development in kernel also needs to lock down
the low 1M. So we can't simply revert above commits to fix the page allocation
failure from DMA zone as someone suggested.

***Solution:
Currently, only DMA atomic pool and dma-kmalloc will initialize and
request page allocation with GFP_DMA during bootup.

So only initializ DMA atomic pool when DMA zone has available managed
pages, otherwise just skip the initialization.

For dma-kmalloc(), for the time being, let's mute the warning of
allocation failure if requesting pages from DMA zone while no manged
pages.  Meanwhile, change code to use dma_alloc_xx/dma_map_xx API to
replace kmalloc(GFP_DMA), or do not use GFP_DMA when calling kmalloc() if
not necessary.  Christoph is posting patches to fix those under
drivers/scsi/.  Finally, we can remove the need of dma-kmalloc() as people
suggested.

This patch (of 3):

In some places of the current kernel, it assumes that dma zone must have
managed pages if CONFIG_ZONE_DMA is enabled.  While this is not always
true.  E.g in kdump kernel of x86_64, only low 1M is presented and locked
down at very early stage of boot, so that there's no managed pages at all
in DMA zone.  This exception will always cause page allocation failure if
page is requested from DMA zone.

Here add function has_managed_dma() and the relevant helper functions to
check if there's DMA zone with managed pages.  It will be used in later
patches.

Link: https://lkml.kernel.org/r/20211223094435.248523-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20211223094435.248523-2-bhe@redhat.com
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoPCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
Yifeng Li [Thu, 2 Dec 2021 06:35:21 +0000 (06:35 +0000)]
PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller

commit e445375882883f69018aa669b67cbb37ec873406 upstream.

Like other SATA controller chips in the Marvell 88SE91xx series, the
Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents
it from working under IOMMU.  Add it to the list of devices that need the
quirk.

Without this patch, device initialization fails with DMA errors:

  ata8: softreset failed (1st FIS failed)
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear

After applying the patch, the controller can be successfully initialized:

  ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
  ata8.00: ATAPI: PIONEER BD-RW   BDR-207M, 1.21, max UDMA/100
  ata8.00: configured for UDMA/100
  scsi 7:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-207M 1.21 PQ: 0 ANSI: 5

Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work
Reported-by: Sam Bingner <sam@bingner.com>
Tested-by: Sam Bingner <sam@bingner.com>
Tested-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agodma_fence_array: Fix PENDING_ERROR leak in dma_fence_array_signaled()
Thomas Hellström [Mon, 29 Nov 2021 15:27:27 +0000 (16:27 +0100)]
dma_fence_array: Fix PENDING_ERROR leak in dma_fence_array_signaled()

commit 95d35838880fb040ccb9fe4a48816bd0c8b62df5 upstream.

If a dma_fence_array is reported signaled by a call to
dma_fence_is_signaled(), it may leak the PENDING_ERROR status.

Fix this by clearing the PENDING_ERROR status if we return true in
dma_fence_array_signaled().

v2:
- Update Cc list, and add R-b.

Fixes: 1f70b8b812f3 ("dma-fence: Propagate errors to dma-fence-array container")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211129152727.448908-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agovirtio/virtio_mem: handle a possible NULL as a memcpy parameter
Peng Hao [Wed, 22 Dec 2021 01:12:25 +0000 (09:12 +0800)]
virtio/virtio_mem: handle a possible NULL as a memcpy parameter

commit cf4a4493ff70874f8af26d75d4346c591c298e89 upstream.

There is a check for vm->sbm.sb_states before, and it should check
it here as well.

Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20211222011225.40573-1-flyingpeng@tencent.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agodrm/tegra: Add back arm_iommu_detach_device()
Dmitry Osipenko [Sat, 4 Dec 2021 14:58:49 +0000 (17:58 +0300)]
drm/tegra: Add back arm_iommu_detach_device()

commit d210919dbdc8a82c676cc3e3c370b1802be63124 upstream.

DMA buffers of 2D/3D engines aren't mapped properly when
CONFIG_ARM_DMA_USE_IOMMU=y. The memory management code of Tegra DRM driver
has a longstanding overhaul overdue and it's not obvious where the problem
is in this case. Hence let's add back the old workaround which we already
had sometime before. It explicitly detaches DRM devices from the offending
implicit IOMMU domain. This fixes a completely broken 2d/3d drivers in
case of ARM32 multiplatform kernel config.

Cc: stable@vger.kernel.org
Fixes: fa6661b7aa0b ("drm/tegra: Optionally attach clients to the IOMMU")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agogpu: host1x: Add back arm_iommu_detach_device()
Dmitry Osipenko [Sat, 4 Dec 2021 14:58:48 +0000 (17:58 +0300)]
gpu: host1x: Add back arm_iommu_detach_device()

commit d5185965c3b59073c4520bad7dd2adf725b9abba upstream.

Host1x DMA buffer isn't mapped properly when CONFIG_ARM_DMA_USE_IOMMU=y.
The memory management code of Host1x driver has a longstanding overhaul
overdue and it's not obvious where the problem is in this case. Hence
let's add back the old workaround which we already had sometime before.
It explicitly detaches Host1x device from the offending implicit IOMMU
domain. This fixes a completely broken Host1x DMA in case of ARM32
multiplatform kernel config.

Cc: stable@vger.kernel.org
Fixes: af1cbfb9bf0f ("gpu: host1x: Support DMA mapping of buffers")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoiommu/io-pgtable-arm-v7s: Add error handle for page table allocation failure
Yunfei Wang [Tue, 7 Dec 2021 11:33:15 +0000 (19:33 +0800)]
iommu/io-pgtable-arm-v7s: Add error handle for page table allocation failure

commit a556cfe4cabc6d79cbb7733f118bbb420b376fe6 upstream.

In __arm_v7s_alloc_table function:
iommu call kmem_cache_alloc to allocate page table, this function
allocate memory may fail, when kmem_cache_alloc fails to allocate
table, call virt_to_phys will be abnomal and return unexpected phys
and goto out_free, then call kmem_cache_free to release table will
trigger KE, __get_free_pages and free_pages have similar problem,
so add error handle for page table allocation failure.

Fixes: 29859aeb8a6e ("iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.10.*
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20211207113315.29109-1-yf.wang@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoARM: dts: at91: update alternate function of signal PD20
Hari Prasath [Wed, 8 Dec 2021 06:35:53 +0000 (12:05 +0530)]
ARM: dts: at91: update alternate function of signal PD20

commit 12f332d2dd3187472f595b678246adb10d886bd0 upstream.

The alternate function of PD20 is 4 as per the datasheet of
sama7g5 and not 5 as defined earlier.

Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com>
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211208063553.19807-1-Hari.PrasathGE@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoarm64: errata: Fix exec handling in erratum 1418040 workaround
D Scott Phillips [Mon, 20 Dec 2021 23:41:14 +0000 (15:41 -0800)]
arm64: errata: Fix exec handling in erratum 1418040 workaround

commit 38e0257e0e6f4fef2aa2966b089b56a8b1cfb75c upstream.

The erratum 1418040 workaround enables CNTVCT_EL1 access trapping in EL0
when executing compat threads. The workaround is applied when switching
between tasks, but the need for the workaround could also change at an
exec(), when a non-compat task execs a compat binary or vice versa. Apply
the workaround in arch_setup_new_exec().

This leaves a small window of time between SET_PERSONALITY and
arch_setup_new_exec where preemption could occur and confuse the old
workaround logic that compares TIF_32BIT between prev and next. Instead, we
can just read cntkctl to make sure it's in the state that the next task
needs. I measured cntkctl read time to be about the same as a mov from a
general-purpose register on N1. Update the workaround logic to examine the
current value of cntkctl instead of the previous task's compat state.

Fixes: d49f7d7376d0 ("arm64: Move handling of erratum 1418040 into C code")
Cc: <stable@vger.kernel.org> # 5.9.x
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211220234114.3926-1-scott@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agocxl/pmem: Fix reference counting for delayed work
Dan Williams [Fri, 29 Oct 2021 19:55:47 +0000 (12:55 -0700)]
cxl/pmem: Fix reference counting for delayed work

commit 08b9e0ab8af48895337192e683de44ab1e1b7427 upstream.

There is a potential race between queue_work() returning and the
queued-work running that could result in put_device() running before
get_device(). Introduce the cxl_nvdimm_bridge_state_work() helper that
takes the reference unconditionally, but drops it if no new work was
queued, to keep the references balanced.

Fixes: 8fdcb1704f61 ("cxl/pmem: Add initial infrastructure for pmem support")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163553734757.2509761.3305231863616785470.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agobus: mhi: core: Fix race while handling SYS_ERR at power up
Manivannan Sadhasivam [Thu, 16 Dec 2021 08:12:24 +0000 (13:42 +0530)]
bus: mhi: core: Fix race while handling SYS_ERR at power up

commit d651ce8e917fa1bf6cfab8dca74c512edffc35d3 upstream.

During SYS_ERR condition, as a response to the MHI_RESET from host, some
devices tend to issue BHI interrupt without clearing the SYS_ERR state in
the device. This creates a race condition and causes a failure in booting
up the device.

The issue is seen on the Sierra Wireless EM9191 modem during SYS_ERR
handling in mhi_async_power_up(). Once the host detects that the device
is in SYS_ERR state, it issues MHI_RESET and waits for the device to
process the reset request. During this time, the device triggers the BHI
interrupt to the host without clearing SYS_ERR condition. So the host
starts handling the SYS_ERR condition again.

To fix this issue, let's register the IRQ handler only after handling the
SYS_ERR check to avoid getting spurious IRQs from the device.

Fixes: e18d4e9fa79b ("bus: mhi: core: Handle syserr during power_up")
Cc: stable@vger.kernel.org
Reported-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Aleksander Morgado <aleksander@aleksander.es>
Tested-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agobus: mhi: core: Fix reading wake_capable channel configuration
Bhaumik Bhatt [Thu, 16 Dec 2021 08:12:23 +0000 (13:42 +0530)]
bus: mhi: core: Fix reading wake_capable channel configuration

commit 42c4668f7efe1485dfc382517b412c0c6ab102b8 upstream.

The 'wake-capable' entry in channel configuration is not set when
parsing the configuration specified by the controller driver. Add
the missing entry to ensure channel is correctly specified as a
'wake-capable' channel.

Link: https://lore.kernel.org/r/1638320491-13382-1-git-send-email-quic_bbhatt@quicinc.com
Fixes: 0cbf260820fa ("bus: mhi: core: Add support for registering MHI controllers")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bhaumik Bhatt <quic_bbhatt@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agobus: mhi: pci_generic: Graceful shutdown on freeze
Loic Poulain [Thu, 16 Dec 2021 08:12:19 +0000 (13:42 +0530)]
bus: mhi: pci_generic: Graceful shutdown on freeze

commit f77097ec8c0141a4b5cf3722a246be0cb5677e29 upstream.

There is no reason for shutting down MHI ungracefully on freeze,
this causes the MHI host stack & device stack to not be aligned
anymore since the proper MHI reset sequence is not performed for
ungraceful shutdown.

Link: https://lore.kernel.org/r/1635268180-13699-1-git-send-email-loic.poulain@linaro.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Cc: stable@vger.kernel.org
Suggested-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agolkdtm: Fix content of section containing lkdtm_rodata_do_nothing()
Christophe Leroy [Fri, 8 Oct 2021 16:58:40 +0000 (18:58 +0200)]
lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()

commit bc93a22a19eb2b68a16ecf04cdf4b2ed65aaf398 upstream.

On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA
test leads to "Illegal instruction" failure.

Looking at the content of rodata_objcopy.o, we see that the
function content zeroes only:

Disassembly of section .rodata:

0000000000000000 <.lkdtm_rodata_do_nothing>:
   0: 00 00 00 00  .long 0x0

Add the contents flag in order to keep the content of the section
while renaming it.

Disassembly of section .rodata:

0000000000000000 <.lkdtm_rodata_do_nothing>:
   0: 4e 80 00 20  blr

Fixes: e9e08a07385e ("lkdtm: support llvm-objcopy")
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/8900731fbc05fb8b0de18af7133a8fc07c3c53a1.1633712176.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoiio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046
Jonathan Cameron [Sun, 17 Oct 2021 17:22:09 +0000 (18:22 +0100)]
iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046

commit 9020ef659885f2622cfb386cc229b6d618362895 upstream.

IIO triggers are software IRQ chips that split an incoming IRQ into
separate IRQs routed to all devices using the trigger.
When all consumers are done then a trigger callback reenable() is
called.  There are a few circumstances under which this can happen
in atomic context.

1) A single user of the trigger that calls the iio_trigger_done()
function from interrupt context.
2) A race between disconnecting the last device from a trigger and
the trigger itself sucessfully being disabled.

To avoid a resulting scheduling whilst atomic, close this second corner
by using schedule_work() to ensure the reenable is not done in atomic
context.

Note that drivers must be careful to manage the interaction of
set_state() and reenable() callbacks to ensure appropriate reference
counting if they are relying on the same hardware controls.

Deliberately taking this the slow path rather than via a fixes tree
because the error has hard to hit and I would like it to soak for a while
before hitting a release kernel.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211017172209.112387-1-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoiio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
Jonathan Cameron [Sun, 5 Dec 2021 17:27:28 +0000 (17:27 +0000)]
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs

commit c9791a94384af07592d29504004d2255dbaf8663 upstream.

Unfortuanately a non standards compliant ACPI ID is known to be
in the wild on some AAEON boards.

Partly revert the removal of these IDs so that ADC081C will again
work + add a comment to that affect for future reference.

Whilst here use generic firmware properties rather than the ACPI
specific handling previously found in this driver.

Reported-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw>
Fixes: c458b7ca3fd0 ("iio:adc:ti-adc081c: Drop ACPI ids that seem very unlikely to be official.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw> #UP-extremei11
Link: https://lore.kernel.org/r/20211205172728.2826512-1-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomei: hbm: fix client dma reply status
Alexander Usyskin [Tue, 28 Dec 2021 08:20:47 +0000 (10:20 +0200)]
mei: hbm: fix client dma reply status

commit 6b0b80ac103b2a40c72a47c301745fd1f4ef4697 upstream.

Don't blindly copy status value received from the firmware
into internal client status field,
It may be positive and ERR_PTR(ret) will translate it
into an invalid address and the caller will crash.

Put the error code into the client status on failure.

Fixes: 369aea845951 ("mei: implement client dma setup.")
Cc: <stable@vger.kernel.org> # v5.11+
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: : Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20211228082047.378115-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agocan: softing_cs: softingcs_probe(): fix memleak on registration failure
Johan Hovold [Wed, 22 Dec 2021 10:48:43 +0000 (11:48 +0100)]
can: softing_cs: softingcs_probe(): fix memleak on registration failure

commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream.

In case device registration fails during probe, the driver state and
the embedded platform device structure needs to be freed using
platform_device_put() to properly free all resources (e.g. the device
name).

Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card")
Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org
Cc: stable@vger.kernel.org # 2.6.38
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: cec-pin: fix interrupt en/disable handling
Hans Verkuil [Wed, 1 Dec 2021 12:41:25 +0000 (13:41 +0100)]
media: cec-pin: fix interrupt en/disable handling

commit 713bdfa10b5957053811470d298def9537d9ff13 upstream.

The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.

Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.

If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 865463fc03ed (media: cec-pin: add error injection support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: stk1160: fix control-message timeouts
Johan Hovold [Mon, 25 Oct 2021 12:16:41 +0000 (13:16 +0100)]
media: stk1160: fix control-message timeouts

commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)")
Cc: stable@vger.kernel.org # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: pvrusb2: fix control-message timeouts
Johan Hovold [Mon, 25 Oct 2021 12:16:39 +0000 (13:16 +0100)]
media: pvrusb2: fix control-message timeouts

commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Cc: stable@vger.kernel.org # 2.6.18
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: redrat3: fix control-message timeouts
Johan Hovold [Mon, 25 Oct 2021 12:16:35 +0000 (13:16 +0100)]
media: redrat3: fix control-message timeouts

commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: dib0700: fix undefined behavior in tuner shutdown
Michael Kuron [Sun, 26 Sep 2021 20:51:26 +0000 (21:51 +0100)]
media: dib0700: fix undefined behavior in tuner shutdown

commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream.

This fixes a problem where closing the tuner would leave it in a state
where it would not tune to any channel when reopened. This problem was
discovered as part of https://github.com/hselasky/webcamd/issues/16.

Since adap->id is 0 or 1, this bit-shift overflows, which is undefined
behavior. The driver still worked in practice as the overflow would in
most environments result in 0, which rendered the line a no-op. When
running the driver as part of webcamd however, the overflow could lead
to 0xff due to optimizations by the compiler, which would, in the end,
improperly shut down the tuner.

The bug is a regression introduced in the commit referenced below. The
present patch causes identical behavior to before that commit for
adap->id equal to 0 or 1. The driver does not contain support for
dib0700 devices with more adapters, assuming such even exist.

Tests have been performed with the Xbox One Digital TV Tuner on amd64.
Not all dib0700 devices are expected to be affected by the regression;
this code path is only taken by those with incorrect endpoint numbers.

Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org
Cc: stable@vger.kernel.org
Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed")
Signed-off-by: Michael Kuron <michael.kuron@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: s2255: fix control-message timeouts
Johan Hovold [Mon, 25 Oct 2021 12:16:40 +0000 (13:16 +0100)]
media: s2255: fix control-message timeouts

commit f71d272ad4e354097020a4e6b1dc6e4b59feb50f upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Use the common control-message timeout define for the five-second
timeouts.

Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: cpia2: fix control-message timeouts
Johan Hovold [Mon, 25 Oct 2021 12:16:37 +0000 (13:16 +0100)]
media: cpia2: fix control-message timeouts

commit 10729be03327f53258cb196362015ad5c6eabe02 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support")
Cc: stable@vger.kernel.org # 2.6.17
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: em28xx: fix control-message timeouts
Johan Hovold [Mon, 25 Oct 2021 12:16:38 +0000 (13:16 +0100)]
media: em28xx: fix control-message timeouts

commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family")
Cc: stable@vger.kernel.org # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: mceusb: fix control-message timeouts
Johan Hovold [Mon, 25 Oct 2021 12:16:34 +0000 (13:16 +0100)]
media: mceusb: fix control-message timeouts

commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: stable@vger.kernel.org # 2.6.36
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: flexcop-usb: fix control-message timeouts
Johan Hovold [Mon, 25 Oct 2021 12:16:36 +0000 (13:16 +0100)]
media: flexcop-usb: fix control-message timeouts

commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Note that the driver was multiplying some of the timeout values with HZ
twice resulting in 3000-second timeouts with HZ=1000.

Also note that two of the timeout defines are currently unused.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: v4l2-ioctl.c: readbuffers depends on V4L2_CAP_READWRITE
Hans Verkuil [Wed, 3 Nov 2021 12:28:31 +0000 (12:28 +0000)]
media: v4l2-ioctl.c: readbuffers depends on V4L2_CAP_READWRITE

commit cd9d9377ed235b294a492a094e1666178a5e78fd upstream.

If V4L2_CAP_READWRITE is not set, then readbuffers must be set to 0,
otherwise v4l2-compliance will complain.

A note on the Fixes tag below: this patch does not really fix that commit,
but it can be applied from that commit onwards. For older code there is no
guarantee that device_caps is set, so even though this patch would apply,
it will not work reliably.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 049e684f2de9 (media: v4l2-dev: fix WARN_ON(!vdev->device_caps))
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: ov8865: Disable only enabled regulators on error path
Sakari Ailus [Wed, 15 Dec 2021 08:38:48 +0000 (09:38 +0100)]
media: ov8865: Disable only enabled regulators on error path

commit cbe0b3af73bf72fad197756f026084404e2bcdc7 upstream.

If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.

Fix this by disabling only clocks and regulators that were enabled
previously.

Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agomedia: cec: fix a deadlock situation
Hans Verkuil [Wed, 1 Dec 2021 12:41:26 +0000 (13:41 +0100)]
media: cec: fix a deadlock situation

commit a9e6107616bb8108aa4fc22584a05e69761a91f7 upstream.

The cec_devnode struct has a lock meant to serialize access
to the fields of this struct. This lock is taken during
device node (un)registration and when opening or releasing a
filehandle to the device node. When the last open filehandle
is closed the cec adapter might be disabled by calling the
adap_enable driver callback with the devnode.lock held.

However, if during that callback a message or event arrives
then the driver will call one of the cec_queue_event()
variants in cec-adap.c, and those will take the same devnode.lock
to walk the open filehandle list.

This obviously causes a deadlock.

This is quite easy to reproduce with the cec-gpio driver since that
uses the cec-pin framework which generated lots of events and uses
a kernel thread for the processing, so when adap_enable is called
the thread is still running and can generate events.

But I suspect that it might also happen with other drivers if an
interrupt arrives signaling e.g. a received message before adap_enable
had a chance to disable the interrupts.

This patch adds a new mutex to serialize access to the fhs list.
When adap_enable() is called the devnode.lock mutex is held, but
not devnode.lock_fhs. The event functions in cec-adap.c will now
use devnode.lock_fhs instead of devnode.lock, ensuring that it is
safe to call those functions from the adap_enable callback.

This specific issue only happens if the last open filehandle is closed
and the physical address is invalid. This is not something that
happens during normal operation, but it does happen when monitoring
CEC traffic (e.g. cec-ctl --monitor) with an unconfigured CEC adapter.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoksmbd: add reserved room in ipc request/response
Namjae Jeon [Thu, 6 Jan 2022 01:30:31 +0000 (10:30 +0900)]
ksmbd: add reserved room in ipc request/response

commit 41dbda16a0902798e732abc6599de256b9dc3b27 upstream.

Whenever new parameter is added to smb configuration, It is possible
to break the execution of the IPC daemon by mismatch size of
request/response. This patch tries to reserve space in ipc request/response
in advance to prevent that.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoksmbd: limits exceeding the maximum allowable outstanding requests
Namjae Jeon [Fri, 31 Dec 2021 00:26:25 +0000 (09:26 +0900)]
ksmbd: limits exceeding the maximum allowable outstanding requests

commit b589f5db6d4af8f14d70e31e1276b4c017668a26 upstream.

If the client ignores the CreditResponse received from the server and
continues to send the request, ksmbd limits the requests if it exceeds
smb2 max credits.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoksmbd: move credit charge deduction under processing request
Namjae Jeon [Wed, 29 Dec 2021 14:10:03 +0000 (23:10 +0900)]
ksmbd: move credit charge deduction under processing request

commit 914d7e5709ac59ded70bea7956d408fe2acd7c3c upstream.

Moves the credit charge deduction from total_credits under the processing
a request. When repeating smb2 lock request and other command request,
there will be a problem that ->total_credits does not decrease.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoksmbd: add support for smb2 max credit parameter
Namjae Jeon [Wed, 29 Dec 2021 14:08:46 +0000 (23:08 +0900)]
ksmbd: add support for smb2 max credit parameter

commit 004443b3f6d722b455cf963ed7c3edd7f4772405 upstream.

Add smb2 max credits parameter to adjust maximum credits value to limit
number of outstanding requests.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoksmbd: fix guest connection failure with nautilus
Namjae Jeon [Mon, 17 Jan 2022 13:16:01 +0000 (22:16 +0900)]
ksmbd: fix guest connection failure with nautilus

commit ac090d9c90b087d6fb714e54b2a6dd1e6c373ed6 upstream.

MS-SMB2 describe session sign like the following.
Session.SigningRequired MUST be set to TRUE under the following conditions:
 - If the SMB2_NEGOTIATE_SIGNING_REQUIRED bit is set in the SecurityMode
   field of the client request.
 - If the SMB2_SESSION_FLAG_IS_GUEST bit is not set in the SessionFlags
   field and Session.IsAnonymous is FALSE and either Connection.ShouldSign
   or global RequireMessageSigning is TRUE.

When trying guest account connection using nautilus, The login failure
happened on session setup. ksmbd does not allow this connection
when the user is a guest and the connection sign is set. Just do not set
session sign instead of error response as described in the specification.
And this change improves the guest connection in Nautilus.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agoksmbd: uninitialized variable in create_socket()
Dan Carpenter [Sat, 15 Jan 2022 11:49:00 +0000 (14:49 +0300)]
ksmbd: uninitialized variable in create_socket()

commit b207602fb04537cb21ac38fabd7577eca2fa05ae upstream.

The "ksmbd_socket" variable is not initialized on this error path.

Cc: stable@vger.kernel.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agonet: phy: marvell: add Marvell specific PHY loopback
Mohammad Athari Bin Ismail [Sat, 15 Jan 2022 09:25:15 +0000 (17:25 +0800)]
net: phy: marvell: add Marvell specific PHY loopback

commit 020a45aff1190c32b1087cd75b57fbf6bff46ea6 upstream.

Existing genphy_loopback() is not applicable for Marvell PHY. Besides
configuring bit-6 and bit-13 in Page 0 Register 0 (Copper Control
Register), it is also required to configure same bits  in Page 2
Register 21 (MAC Specific Control Register 2) according to speed of
the loopback is operating.

Tested working on Marvell88E1510 PHY for all speeds (1000/100/10Mbps).

FIXME: Based on trial and error test, it seem 1G need to have delay between
soft reset and loopback enablement.

Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agortc: cmos: take rtc_lock while reading from CMOS
Mateusz Jończyk [Fri, 10 Dec 2021 20:01:23 +0000 (21:01 +0100)]
rtc: cmos: take rtc_lock while reading from CMOS

commit 454f47ff464325223129b9b5b8d0b61946ec704d upstream.

Reading from the CMOS involves writing to the index register and then
reading from the data register. Therefore access to the CMOS has to be
serialized with rtc_lock. This invocation of CMOS_READ was not
serialized, which could cause trouble when other code is accessing CMOS
at the same time.

Use spin_lock_irq() like the rest of the function.

Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a
separate pair of spin_lock_irq() / spin_unlock_irq() before doing the
math.

Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-2-mat.jonczyk@o2.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 years agotools/nolibc: fix incorrect truncation of exit code
Willy Tarreau [Sun, 24 Oct 2021 17:28:16 +0000 (19:28 +0200)]
tools/nolibc: fix incorrect truncation of exit code

commit de0244ae40ae91145faaf164a4252347607c3711 upstream.

Ammar Faizi reported that our exit code handling is wrong. We truncate
it to the lowest 8 bits but the syscall itself is expected to take a
regular 32-bit signed integer, not an unsigned char. It's the kernel
that later truncates it to the lowest 8 bits. The difference is visible
in strace, where the program below used to show exit(255) instead of
exit(-1):

  int main(void)
  {
        return -1;
  }

This patch applies the fix to all archs. x86_64, i386, arm64, armv7 and
mips were all tested and confirmed to work fine now. Risc-v was not
tested but the change is trivial and exactly the same as for other archs.

Reported-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>