x86/mm: Move LDT remap out of KASLR region on 5-level paging

commit d52888aa2753e3063a9d3a0c9f72f94aa9809c15 upstream

On 5-level paging the LDT remap area is placed in the middle of the KASLR
randomization region and it can overlap with the direct mapping, the
vmalloc or the vmap area.

The LDT mapping is per mm, so it cannot be moved into the P4D page table
next to the CPU_ENTRY_AREA without complicating PGD table allocation for
5-level paging.

The 4 PGD slot gap just before the direct mapping is reserved for
hypervisors, so it cannot be used.

Move the direct mapping one slot deeper and use the resulting gap for the
LDT remap area. The resulting layout is the same for 4 and 5 level paging.

[ tglx: Massaged changelog ]

Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: dave.hansen@linux.intel.com
Cc: peterz@infradead.org
Cc: boris.ostrovsky@oracle.com
Cc: jgross@suse.com
Cc: bhe@redhat.com
Cc: willy@infradead.org
Cc: linux-mm@kvack.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181026122856.66224-2-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test code-reading: Fix perf_env setup for PTI entry trampolines

commit f6c66d73bb8192d357bb5fb8cd5826920f811d8c upstream.

The "Object code reading" test will not create maps for the PTI entry
trampolines unless the machine environment exists to show that the arch is
x86_64.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1528183800-21577-1-git-send-email-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf machine: Workaround missing maps for x86 PTI entry trampolines

commit 4d99e4136580d178e3523281a820be17bf814bf8 upstream.

On x86_64 the PTI entry trampolines are not in the kernel map created by
perf tools. That results in the addresses having no symbols and prevents
annotation.  It also causes Intel PT to have decoding errors at the
trampoline addresses.

Workaround that by creating maps for the trampolines.

At present the kernel does not export information revealing where the
trampolines are.  Until that happens, the addresses are hardcoded.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf machine: Add nr_cpus_avail()

commit 9cecca325ea879c84fcd31a5e609a514c1a1dbd1 upstream.

Add a function to return the number of the machine's available CPUs.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix kernel_start for PTI on x86

commit 19422a9f2a3be7f3a046285ffae4cbb571aa853a upstream.

On x86_64, PTI entry trampolines are less than the start of kernel text,
but still above 2^63. So leave kernel_start = 1ULL << 63 for x86_64.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526548928-20790-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf machine: Add machine__is() to identify machine arch

commit dbbd34a666ee117d0e39e71a47f38f02c4a5c698 upstream.

Add a function to identify the machine architecture.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526548928-20790-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / watchdog: Prefer iTCO_wdt always when WDAT table uses RTC SRAM

[ Upstream commit 5a802a7a285c8877ca872e44eeb0f06afcb5212f ]

After we added quirk for Lenovo Z50-70 it turns out there are at least
two more systems where WDAT table includes instructions accessing RTC
SRAM. Instead of quirking each system separately, look for such
instructions in the table and automatically prefer iTCO_wdt if found.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199033
Reported-by: Arnold Guy <aurnoldg@gmail.com>
Reported-by: Alois Nespor <nespor@fssp.cz>
Reported-by: Yury Pakin <zxwarior@gmail.com>
Reported-by: Ihor Chyhin <ihorchyhin@ukr.net>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer()

[ Upstream commit 025911a5f4e36955498ed50806ad1b02f0f76288 ]

There is no need to have the '__be32 *p' variable static since new value
always be assigned before use it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

zram: close udev startup race condition as default groups

commit fef912bf860e upstream.
commit 98af4d4df889 upstream.

I got a report from Howard Chen that he saw zram and sysfs race(ie,
zram block device file is created but sysfs for it isn't yet)
when he tried to create new zram devices via hotadd knob.

v4.20 kernel fixes it by [1, 2] but it's too large size to merge
into -stable so this patch fixes the problem by registering defualt
group by Greg KH's approach[3].

This patch should be applied to every stable tree [3.16+] currently
existing from kernel.org because the problem was introduced at 2.6.37
by [4].

[1] fef912bf860e, block: genhd: add 'groups' argument to device_add_disk
[2] 98af4d4df889, zram: register default groups with device_add_disk()
[3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/
[4] 33863c21e69e9, Staging: zram: Replace ioctls with sysfs interface

Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Tested-by: Howard Chen <howardsoc@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Fix RX packet size > 8191

[ Upstream commit 8137b6ef0ce469154e5cf19f8e7fe04d9a72ac5e ]

Ping problems with packets > 8191 as shown:

PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data.
8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms
wrong data byte 8144 should be 0xd0 but was 0x0
16    10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
      20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
%< ---------------snip--------------------------------------
8112  b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
      c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
8144  0 0 0 0 d0 d1
      ^^^^^^^
Notice the 4 bytes of 0 before the expected byte of d0.

Databook notes that the RX buffer must be a multiple of 4/8/16
bytes [1].

Update the DMA Buffer size define to 8188 instead of 8192. Remove
the -1 from the RX buffer size allocations and use the new
DMA Buffer size directly.

[1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a
    [section 8.4.2 - Table 8-24]

Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets.

Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)")
Suggested-by: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix potential memory corruption

[ Upstream commit fa5c448d98f0df660bfcad3dd5facc027ef84cd3 ]

A stuck ramrod should be deleted from the completion_pending list,
otherwise it will be added again in the future and corrupt the list.

Return error value to inform that ramrod is stuck and should be deleted.

Signed-off-by: Sagiv Ozeri <sagiv.ozeri@cavium.com>
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix blocking/unlimited SPQ entries leak

[ Upstream commit 2632f22ebd08da249c2017962a199a0cfb2324bf ]

When there are no SPQ entries left in the free_pool, new entries are
allocated and are added to the unlimited list. When an entry in the pool
is available, the content is copied from the original entry, and the new
entry is sent to the device. qed_spq_post() is not aware of that, so the
additional entry is stored in the original entry as p_post_ent, which can
later be returned to the pool.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix memory/entry leak in qed_init_sp_request()

[ Upstream commit 39477551df940ddb1339203817de04f5caaacf7a ]

Free the allocated SPQ entry or return the acquired SPQ entry to the free
list in error flows.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: restore NETIF_F_GSO_IPXIP[46] to netdev features

[ Upstream commit ba766b8b99c30ad3c55ed8cf224d1185ecff1476 ]

Since commit bacd75cfac8a ("i40e/i40evf: Add capability exchange for
outer checksum", 2017-04-06) the i40e driver has not reported support
for IP-in-IP offloads. This likely occurred due to a bad rebase, as the
commit extracts hw_enc_features into its own variable. As part of this
change, it dropped the NETIF_F_FSO_IPXIP flags from the
netdev->hw_enc_features. This was unfortunately not caught during code
review.

Fix this by adding back the missing feature flags.

For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318daa4a
("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20),
replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT.

NETIF_F_GSO_IPXIP6 was added in commit bf2d1df39502 ("intel: Add support
for IPv6 IP-in-IP offload", 2016-05-20).

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix undefined symbol scnprintf in libperf-jvmti.so

[ Upstream commit 6ac2226229d931153331a93d90655a3de05b9290 ]

Currently jvmti agent can not be used because function scnprintf is not
present in the agent libperf-jvmti.so. As a result the JVM when using
such agent to record JITed code profiling information will fail on
looking up scnprintf:

  java: symbol lookup error: lib/libperf-jvmti.so: undefined symbol: scnprintf

This commit fixes that by reverting to the use of snprintf, that can be
looked up, instead of scnprintf, adding a proper check for the returned
value in order to print a better error message when the jitdump file
pathname is too long. Checking the returned value also helps to comply
with some recent gcc versions, like gcc8, which will fail due to
truncated writing checks related to the -Werror=format-truncation= flag.

Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 1541117601-18937-2-git-send-email-gromero@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-mvpxxxy7wnzaj74cq75muw3f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Take the hotplug lock in sched_init_smp()

[ Upstream commit 40fa3780bac2b654edf23f6b13f4e2dd550aea10 ]

When running on linux-next (8c60c36d0b8c ("Add linux-next specific files
for 20181019")) + CONFIG_PROVE_LOCKING=y on a big.LITTLE system (e.g.
Juno or HiKey960), we get the following report:

 [    0.748225] Call trace:
 [    0.750685]  lockdep_assert_cpus_held+0x30/0x40
 [    0.755236]  static_key_enable_cpuslocked+0x20/0xc8
 [    0.760137]  build_sched_domains+0x1034/0x1108
 [    0.764601]  sched_init_domains+0x68/0x90
 [    0.768628]  sched_init_smp+0x30/0x80
 [    0.772309]  kernel_init_freeable+0x278/0x51c
 [    0.776685]  kernel_init+0x10/0x108
 [    0.780190]  ret_from_fork+0x10/0x18

The static_key in question is 'sched_asym_cpucapacity' introduced by
commit:

  df054e8445a4 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations")

In this particular case, we enable it because smp_prepare_cpus() will
end up fetching the capacity-dmips-mhz entry from the devicetree,
so we already have some asymmetry detected when entering sched_init_smp().

This didn't get detected in tip/sched/core because we were missing:

  commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations")

Calls to build_sched_domains() post sched_init_smp() will hold the
hotplug lock, it just so happens that this very first call is a
special case. As stated by a comment in sched_init_smp(), "There's no
userspace yet to cause hotplug operations" so this is a harmless
warning.

However, to both respect the semantics of underlying
callees and make lockdep happy, take the hotplug lock in
sched_init_smp(). This also satisfies the comment atop
sched_init_domains() that says "Callers must hold the hotplug lock".

Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: quentin.perret@arm.com
Link: http://lkml.kernel.org/r/1540301851-3048-1-git-send-email-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/perf: Change CPUM_CF return code in event init function

[ Upstream commit 0bb2ae1b26e1fb7543ec7474cdd374ac4b88c4da ]

The function perf_init_event() creates a new event and
assignes it to a PMU. This a done in a loop over all existing
PMUs. For each listed PMU the event init function is called
and if this function does return any other error than -ENOENT,
the loop is terminated the creation of the event fails.

If the event is invalid, return -ENOENT to try other PMUs.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/raid6: Fix arm64 test build

[ Upstream commit 313a06e636808387822af24c507cba92703568b1 ]

The lib/raid6/test fails to build the neon objects
on arm64 because the correct machine type is 'aarch64'.

Once this is correctly enabled, the neon recovery objects
need to be added to the build.

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: fixed-factor: fix of_node_get-put imbalance

[ Upstream commit f98e8a572bddbf27032114127d2fcc78fa5e6a9d ]

When the fixed factor clock is created by devicetree,
of_clk_add_provider is called.  Add a call to
of_clk_del_provider in the remove function to balance
it out.

Reported-by: Alan Tull <atull@kernel.org>
Fixes: 971451b3b15d ("clk: fixed-factor: Convert into a module platform driver")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "drm/exynos/decon5433: implement frame counter"

[ Upstream commit 6ca469e22a30992b4478d2ab88737c70667c1e00 ]

This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b

This patch makes it to need get_vblank_counter callback in crtc
to get frame counter from decon driver.

However, drm_dev->max_vblank_count is a member unique to
vendor's DRM driver but in case of ARM DRM, some CRTC devices
don't provide the frame counter value. As a result, this patch
made extension and clone mode not working.

Instead of this patch, we may need separated max_vblank_count
which belongs to each CRTC device, or need to implement frame
counter emulation for them who don't support HW frame counter.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ibmpowernv) Remove bogus __init annotations

[ Upstream commit e3e61f01d755188cb6c2dcf5a244b9c0937c258e ]

If gcc decides not to inline make_sensor_label():

    WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label()
    The function .create_device_attrs() references
    the function __init .make_sensor_label().
    This is often because .create_device_attrs lacks a __init
    annotation or the annotation of .make_sensor_label is wrong.

As .probe() can be called after freeing of __init memory, all __init
annotiations in the driver are bogus, and should be removed.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: fix HiperSockets sniffer

[ Upstream commit bd74a7f9cc033cf4d405788f80292268987dc0c5 ]

Sniffing mode for L3 HiperSockets requires that no IP addresses are
registered with the HW. The preferred way to achieve this is for
userspace to delete all the IPs on the interface. But qeth is expected
to also tolerate a configuration where that is not the case, by skipping
the IP registration when in sniffer mode.
Since commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
reworked the IP registration logic in the L3 subdriver, this no longer
works. When the qeth device is set online, qeth_l3_recover_ip() now
unconditionally registers all unicast addresses from our internal
IP table.

While we could fix this particular problem by skipping
qeth_l3_recover_ip() on a sniffer device, the more future-proof change
is to skip the IP address registration at the lowest level. This way we
a) catch any future code path that attempts to register an IP address
   without considering the sniffer scenario, and
b) continue to build up our internal IP table, so that if sniffer mode
   is switched off later we can operate just like normal.

Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: xt_IDLETIMER: add sysfs filename checking routine

[ Upstream commit 54451f60c8fa061af9051a53be9786393947367c ]

When IDLETIMER rule is added, sysfs file is created under
/sys/class/xt_idletimer/timers/
But some label name shouldn't be used.
".", "..", "power", "uevent", "subsystem", etc...
So that sysfs filename checking routine is needed.

test commands:
   %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power"

splat looks like:
[95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power'
[95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20
[95765.449755] Call Trace:
[95765.449755]  dump_stack+0xc9/0x16b
[95765.449755]  ? show_regs_print_info+0x5/0x5
[95765.449755]  sysfs_warn_dup+0x74/0x90
[95765.449755]  sysfs_add_file_mode_ns+0x352/0x500
[95765.449755]  sysfs_create_file_ns+0x179/0x270
[95765.449755]  ? sysfs_add_file_mode_ns+0x500/0x500
[95765.449755]  ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER]
[95765.449755]  ? rcu_read_lock_sched_held+0x114/0x130
[95765.449755]  ? __kmalloc_track_caller+0x211/0x2b0
[95765.449755]  ? memcpy+0x34/0x50
[95765.449755]  idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER]
[ ... ]

Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: Correct rcu_dereference() call in ip_set_put_comment()

[ Upstream commit 17b8b74c0f8dbf9b9e3301f9ca5b65dd1c079951 ]

The function is called when rcu_read_lock() is held and not
when rcu_read_lock_bh() is held.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mm: Fix ERROR: "__node_distance" undefined!

[ Upstream commit a541f0ebcc08ed8bc0cc492eec9a86cb280a9f24 ]

Fixes:
ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
make: *** [Makefile:1275: modules] Error 2
+ exit 1

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net

[ Upstream commit 886503f34d63e681662057448819edb5b1057a97 ]

Allow /0 as advertised for hash:net,port,net sets.

For "hash:net,port,net", ipset(8) says that "either subnet
is permitted to be a /0 should you wish to match port
between all destinations."

Make that statement true.

Before:

    # ipset create cidrzero hash:net,port,net
    # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
    ipset v6.34: The value of the CIDR parameter of the IP address is invalid

    # ipset create cidrzero6 hash:net,port,net family inet6
    # ipset add cidrzero6 ::/0,12345,::/0
    ipset v6.34: The value of the CIDR parameter of the IP address is invalid

After:

    # ipset create cidrzero hash:net,port,net
    # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
    # ipset test cidrzero 192.168.205.129,12345,172.16.205.129
    192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero.

    # ipset create cidrzero6 hash:net,port,net family inet6
    # ipset add cidrzero6 ::/0,12345,::/0
    # ipset test cidrzero6 fe80::1,12345,ff00::1
    fe80::1,tcp:12345,ff00::1 is in set cidrzero6.

See also:

  https://bugzilla.kernel.org/show_bug.cgi?id=200897
  https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9c

Signed-off-by: Eric Westbrook <linux@westbrook.io>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: list:set: Decrease refcount synchronously on deletion and replace

[ Upstream commit 439cd39ea136d2c026805264d58a91f36b6b64ca ]

Commit 45040978c899 ("netfilter: ipset: Fix set:list type crash
when flush/dump set in parallel") postponed decreasing set
reference counters to the RCU callback.

An 'ipset del' command can terminate before the RCU grace period
is elapsed, and if sets are listed before then, the reference
counter shown in userspace will be wrong:

 # ipset create h hash:ip; ipset create l list:set; ipset add l
 # ipset del l h; ipset list h
 Name: h
 Type: hash:ip
 Revision: 4
 Header: family inet hashsize 1024 maxelem 65536
 Size in memory: 88
 References: 1
 Number of entries: 0
 Members:
 # sleep 1; ipset list h
 Name: h
 Type: hash:ip
 Revision: 4
 Header: family inet hashsize 1024 maxelem 65536
 Size in memory: 88
 References: 0
 Number of entries: 0
 Members:

Fix this by making the reference count update synchronous again.

As a result, when sets are listed, ip_set_name_byindex() might
now fetch a set whose reference count is already zero. Instead
of relying on the reference count to protect against concurrent
set renaming, grab ip_set_ref_lock as reader and copy the name,
while holding the same lock in ip_set_rename() as writer
instead.

Reported-by: Li Shuang <shuali@redhat.com>
Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/vdso: add missing FORCE to build targets

[ Upstream commit b44b136a3773d8a9c7853f8df716bd1483613cbb ]

According to Documentation/kbuild/makefiles.txt all build targets using
if_changed should use FORCE as well. Add missing FORCE to make sure
vdso targets are rebuild properly when not just immediate prerequisites
have changed but also when build command differs.

Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: percpu: Initialize ret in the default case

[ Upstream commit b5bb425871186303e6936fa2581521bdd1964a58 ]

Clang warns that if the default case is taken, ret will be
uninitialized.

./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
        default:
        ^~~~~~~
./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs
here
        return ret;
               ^~~
./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable
'ret' to silence this warning
        unsigned long ret, loop;
                         ^
                          = 0

This warning appears several times while building the erofs filesystem.
While it's not strictly wrong, the BUILD_BUG will prevent this from
becoming a true problem. Initialize ret to 0 in the default case right
before the BUILD_BUG to silence all of these warnings.

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: acerhdf: Add BIOS entry for Gateway LT31 v1.3307

[ Upstream commit 684238d79ad85c5e19a71bb5818e77e329912fbc ]

To fix:

  acerhdf: unknown (unsupported) BIOS version Gateway  /LT31   /v1.3307 , please report, aborting!

As can be seen in the context, the BIOS registers haven't changed in
the previous versions, so the assumption is they won't have changed
in this last update for this somewhat older platform either.

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/earlyprintk: Add a force option for pciserial device

[ Upstream commit d2266bbfa9e3e32e3b642965088ca461bd24a94f ]

The "pciserial" earlyprintk variant helps much on many modern x86
platforms, but unfortunately there are still some platforms with PCI
UART devices which have the wrong PCI class code. In that case, the
current class code check does not allow for them to be used for logging.

Add a sub-option "force" which overrides the class code check and thus
the use of such device can be enforced.

 [ bp: massage formulations. ]

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Stuart R . Anderson" <stuart.r.anderson@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H Peter Anvin <hpa@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thymo van Beers <thymovanbeers@gmail.com>
Cc: alan@linux.intel.com
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20181002164921.25833-1-feng.tang@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix uninitialized value in aa_split_fqname

[ Upstream commit 250f2da49cb8e582215a65c03f50e8ddf5cd119c ]

Syzkaller reported a OOB-read with the stacktrace below. This occurs
inside __aa_lookupn_ns as `n` is not initialized. `n` is obtained from
aa_splitn_fqname. In cases where `name` is invalid, aa_splitn_fqname
returns without initializing `ns_name` and `ns_len`.

Fix this by always initializing `ns_name` and `ns_len`.

__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
memcmp+0xe3/0x160 lib/string.c:861
strnstr+0x4b/0x70 lib/string.c:934
__aa_lookupn_ns+0xc1/0x570 security/apparmor/policy_ns.c:209
aa_lookupn_ns+0x88/0x1e0 security/apparmor/policy_ns.c:240
aa_fqlookupn_profile+0x1b9/0x1010 security/apparmor/policy.c:468
fqlookupn_profile+0x80/0xc0 security/apparmor/label.c:1844
aa_label_strn_parse+0xa3a/0x1230 security/apparmor/label.c:1908
aa_label_parse+0x42/0x50 security/apparmor/label.c:1943
aa_change_profile+0x513/0x3510 security/apparmor/domain.c:1362
apparmor_setprocattr+0xaa4/0x1150 security/apparmor/lsm.c:658
security_setprocattr+0x66/0xc0 security/security.c:1298
proc_pid_attr_write+0x301/0x540 fs/proc/base.c:2555
__vfs_write+0x119/0x9f0 fs/read_write.c:485
vfs_write+0x1fc/0x560 fs/read_write.c:549
ksys_write+0x101/0x260 fs/read_write.c:598
__do_sys_write fs/read_write.c:610 [inline]
__se_sys_write fs/read_write.c:607 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:607
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3b0aaf5866bf ("apparmor: add lib fn to find the "split" for fqnames")
Reported-by: syzbot+61e4b490d9d2da591b50@syzkaller.appspotmail.com
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: exynos5420: Enable PERIS clocks for suspend

[ Upstream commit b33228029d842269e17bba591609e83ed422005d ]

Ensure that clocks for core SoC modules (including TZPC0..9 modules)
are enabled for suspend/resume cycle. This fixes suspend/resume
support on Exynos5422-based Odroid XU3/XU4 boards.

Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/exofs: fix potential memory leak in mount option parsing

[ Upstream commit 515f1867addaba49c1c6ac73abfaffbc192c1db4 ]

There are some cases can cause memory leak when parsing
option 'osdname'.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf symbols: Set PLT entry/header sizes properly on Sparc

[ Upstream commit d6afa561e1471ccfdaf7191230c0c59a37e45a5b ]

Using the sh_entsize for both values isn't correct.  It happens to be
correct on x86...

For both 32-bit and 64-bit sparc, there are four PLT entries in the PLT
section.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: David Tolnay <dtolnay@gmail.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Fixes: b2f7605076d6 ("perf symbols: Fix plt entry calculation for ARM and AARCH64")
Link: http://lkml.kernel.org/r/20181017.120859.2268840244308635255.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: fixed-rate: fix of_node_get-put imbalance

[ Upstream commit 52091c256bdcad0d01e2852a63f19cd2cce6af96 ]

When the fixed rate clock is created by devicetree,
of_clk_add_provider is called.  Add a call to
of_clk_del_provider in the remove function to balance
it out.

Signed-off-by: Alan Tull <atull@kernel.org>
Fixes: 435779fe1336 ("clk: fixed-rate: Convert into a module platform driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_telemetry: report debugfs failure

[ Upstream commit 8d98b1ef368feeb7720b8b9b6f3bd93f2ad892bc ]

On some Goldmont based systems such as ASRock J3455M the BIOS may not
enable the IPC1 device that provides access to the PMC and PUNIT. In
such scenarios, the IOSS and PSS resources from the platform device can
not be obtained and result in a invalid telemetry_plt_config which is an
internal data structure that holds platform config and is maintained by
the telemetry platform driver.

This is also applicable to the platforms where the BIOS supports IPC1
device under debug configurations but IPC1 is disabled by user or the
policy.

This change allows user to know the reason for not seeing entries under
/sys/kernel/debug/telemetry/* when there is no apparent failure at boot.

Cc: Matt Turner <matt.turner@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198779
Acked-by: Matt Turner <matt.turner@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/edid: Add 6 bpc quirk for BOE panel.

[ Upstream commit 922dceff8dc1fb4dafc9af78139ba65671408103 ]

BOE panel (ID: 0x0771) that reports "DFP 1.x compliant TMDS".
But it's 6bpc panel only instead of 8 bpc.

Add panel ID to edid quirk list and set 6 bpc as default to
work around this issue.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540792173-7288-1-git-send-email-shawn.c.lee@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Give start_idle_thread() a return code

[ Upstream commit 7ff1e34bbdc15acab823b1ee4240e94623d50ee8 ]

Fixes:
arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of
non-void function [-Wreturn-type]

longjmp() never returns but gcc still warns that the end of the function
can be reached.
Add a return code and debug aid to detect this impossible case.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfsplus: prevent btree data loss on root split

[ Upstream commit 0a3021d4f5295aa073c7bf5c5e4de60a2e292578 ]

Creating, renaming or deleting a file may cause catalog corruption and
data loss.  This bug is randomly triggered by xfstests generic/027, but
here is a faster reproducer:

  truncate -s 50M fs.iso
  mkfs.hfsplus fs.iso
  mount fs.iso /mnt
  i=100
  while [ $i -le 150 ]; do
    touch /mnt/$i &>/dev/null
    ((++i))
  done
  i=100
  while [ $i -le 150 ]; do
    mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null
    ((++i))
  done
  umount /mnt
  fsck.hfsplus -n fs.iso

The bug is triggered whenever hfs_brec_update_parent() needs to split the
root node.  The height of the btree is not increased, which leaves the new
node orphaned and its records lost.

Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs: prevent btree data loss on root split

[ Upstream commit d057c036672f33d43a5f7344acbb08cf3a8a0c09 ]

This bug is triggered whenever hfs_brec_update_parent() needs to split
the root node.  The height of the btree is not increased, which leaves
the new node orphaned and its records lost.  It is not possible for this
to happen on a valid hfs filesystem because the index nodes have fixed
length keys.

For reasons I ignore, the hfs module does have support for a number of
hfsplus features.  A corrupt btree header may report variable length
keys and trigger this bug, so it's better to fix it.

Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reiserfs: propagate errors from fill_with_dentries() properly

[ Upstream commit b10298d56c9623f9b173f19959732d3184b35f4f ]

fill_with_dentries() failed to propagate errors up to
reiserfs_for_each_xattr() properly.  Plumb them through.

Note that reiserfs_for_each_xattr() is only used by
reiserfs_delete_xattrs() and reiserfs_chown_xattrs().  The result of
reiserfs_delete_xattrs() is discarded anyway, the only difference there is
whether a warning is printed to dmesg.  The result of
reiserfs_chown_xattrs() does matter because it can block chowning of the
file to which the xattrs belong; but either way, the resulting state can
have misaligned ownership, so my patch doesn't improve things greatly.

Credit for making me look at this code goes to Al Viro, who pointed out
that the ->actor calling convention is suboptimal and should be changed.

Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: fix MAC anti-spoofing filter after VFLR

[ Upstream commit 6702185c1ffec3421181b5e24491e3fac920cb61 ]

This change resolves a driver bug where the driver is logging a
message that says "Spoofed packets detected". This can occur on the PF
(host) when a VF has VLAN+MACVLAN enabled and is re-started with a
different MAC address.

MAC and VLAN anti-spoofing filters are to be enabled together.

Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Acked-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: kprobe: make page to RO mode when allocate it

[ Upstream commit 966866892cf89d606544bca22d584ba2ef9ec208 ]

Commit 1404d6f13e47 ("arm64: dump: Add checking for writable and exectuable pages")
has successfully identified code that leaves a page with W+X
permissions.

[    3.245140] arm64/mm: Found insecure W+X mapping at address (____ptrval____)/0xffff000000d90000
[    3.245771] WARNING: CPU: 0 PID: 1 at ../arch/arm64/mm/dump.c:232 note_page+0x410/0x420
[    3.246141] Modules linked in:
[    3.246653] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5-next-20180928-00001-ge70ae259b853-dirty #62
[    3.247008] Hardware name: linux,dummy-virt (DT)
[    3.247347] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    3.247623] pc : note_page+0x410/0x420
[    3.247898] lr : note_page+0x410/0x420
[    3.248071] sp : ffff00000804bcd0
[    3.248254] x29: ffff00000804bcd0 x28: ffff000009274000
[    3.248578] x27: ffff00000921a000 x26: ffff80007dfff000
[    3.248845] x25: ffff0000093f5000 x24: ffff000009526f6a
[    3.249109] x23: 0000000000000004 x22: ffff000000d91000
[    3.249396] x21: ffff000000d90000 x20: 0000000000000000
[    3.249661] x19: ffff00000804bde8 x18: 0000000000000400
[    3.249924] x17: 0000000000000000 x16: 0000000000000000
[    3.250271] x15: ffffffffffffffff x14: 295f5f5f5f6c6176
[    3.250594] x13: 7274705f5f5f5f28 x12: 2073736572646461
[    3.250941] x11: 20746120676e6970 x10: 70616d20582b5720
[    3.251252] x9 : 6572756365736e69 x8 : 3039643030303030
[    3.251519] x7 : 306666666678302f x6 : ffff0000095467b2
[    3.251802] x5 : 0000000000000000 x4 : 0000000000000000
[    3.252060] x3 : 0000000000000000 x2 : ffffffffffffffff
[    3.252323] x1 : 4d151327adc50b00 x0 : 0000000000000000
[    3.252664] Call trace:
[    3.252953]  note_page+0x410/0x420
[    3.253186]  walk_pgd+0x12c/0x238
[    3.253417]  ptdump_check_wx+0x68/0xf8
[    3.253637]  mark_rodata_ro+0x68/0x98
[    3.253847]  kernel_init+0x38/0x160
[    3.254103]  ret_from_fork+0x10/0x18

kprobes allocates a writable executable page with module_alloc() in
order to store executable code.
Reworked to that when allocate a page it sets mode RO. Inspired by
commit 63fef14fc98a ("kprobes/x86: Make insn buffer always ROX and use text_poke()").

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[catalin.marinas@arm.com: removed unnecessary casts]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix return value for cifs_listxattr

[ Upstream commit 0c5d6cb6643f48ad3775322f3ebab6c7eb67484e ]

If the application buffer was too small to fit all the names
we would still count the number of bytes and return this for
listxattr. This would then trigger a BUG in usercopy.c

Fix the computation of the size so that we return -ERANGE
correctly when the buffer is too small.

This fixes the kernel BUG for xfstest generic/377

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: don't dereference smb_file_target before null check

[ Upstream commit 8c6c9bed8773375b1d54ccca2911ec892c59db5d ]

There is a null check on dst_file->private data which suggests
it can be potentially null. However, before this check, pointer
smb_file_target is derived from dst_file->private and dereferenced
in the call to tlink_tcon, hence there is a potential null pointer
deference.

Fix this by assigning smb_file_target and target_tcon after the
null pointer sanity checks.

Detected by CoverityScan, CID#1475302 ("Dereference before null check")

Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.14.83

ARM: dts: r8a7793: Correct critical CPU temperature

commit 1dfc65cef481ac6af64380f26186d5cc585b46eb upstream.

The R-Car M2N hardware manual states that Tc = –40°C to +105°C. The
thermal sensor has an accuracy of ±5°C and there can be a temperature
difference of 1 or 2 degrees between Tjmax and the thermal sensor due
to the location of the latter.

This means that 95°C is a safer value to use.

Fixes: 57f9156bc620ac56 ("ARM: dts: r8a7793: enable to use thermal-zone")
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: r8a7791: Correct critical CPU temperature

commit e4fdf59bcce3b490bbc7197145bcb9f9d5a18cd3 upstream.

The R-Car M2W hardware manual states that Tc = –40°C to +105°C. The
thermal sensor has an accuracy of ±5°C and there can be a temperature
difference of 1 or 2 degrees between Tjmax and the thermal sensor due
to the location of the latter.

This means that 95°C is a safer value to use.

Fixes: cac68a56e34b9810 ("ARM: dts: r8a7791: enable to use thermal-zone")
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation"

This reverts commit 8a13906ae519b3ed95cd0fb73f1098b46362f6c4 which is
commit 53c613fe6349994f023245519265999eed75957f upstream.

It's not ready for the stable trees as there are major slowdowns
involved with this patch.

Reported-by: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "WoodhouseDavid" <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: "SchauflerCasey" <casey.schaufler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: frags: better deal with smp races

[ Upstream commit 0d5b9311baf27bb545f187f12ecfd558220c607d ]

Multiple cpus might attempt to insert a new fragment in rhashtable,
if for example RPS is buggy, as reported by 배석진 in
https://patchwork.ozlabs.org/patch/994601/

We use rhashtable_lookup_get_insert_key() instead of
rhashtable_insert_fast() to let cpus losing the race
free their own inet_frag_queue and use the one that
was inserted by another cpu.

Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: 배석진 <soukjin.bae@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbnet: smsc95xx: disable carrier check while suspending

[ Upstream commit 7b900ead6cc66b2ee873cb042dfba169aa68b56c ]

We need to make sure, that the carrier check polling is disabled
while suspending. Otherwise we can end up with usbnet_read_cmd()
being issued when only usbnet_read_cmd_nopm() is allowed. If this
happens, read operations lock up.

Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: smsc95xx: Fix MTU range

[ Upstream commit 85b18b0237ce9986a81a1b9534b5e2ee116f5504 ]

The commit f77f0aee4da4 ("net: use core MTU range checking in USB NIC
drivers") introduce a common MTU handling for usbnet. But it's missing
the necessary changes for smsc95xx. So set the MTU range accordingly.

This patch has been tested on a Raspberry Pi 3.

Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum: Fix IP2ME CPU policer configuration

[ Upstream commit 96801552f846460fe9ac10f1b189602992f004e1 ]

The CPU policer used to police packets being trapped via a local route
(IP2ME) was incorrectly configured to police based on bytes per second
instead of packets per second.

Change the policer to police based on packets per second and avoid
packet loss under certain circumstances.

Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups")
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: not increase stream's incnt before sending addstrm_in request

[ Upstream commit e1e46479847e66f78f79d8c24d5169a5954b3fc2 ]

Different from processing the addstrm_out request, The receiver handles
an addstrm_in request by sending back an addstrm_out request to the
sender who will increase its stream's in and incnt later.

Now stream->incnt has been increased since it sent out the addstrm_in
request in sctp_send_add_streams(), with the wrong stream->incnt will
even cause crash when copying stream info from the old stream's in to
the new one's in sctp_process_strreset_addstrm_out().

This patch is to fix it by simply removing the stream->incnt change
from sctp_send_add_streams().

Fixes: 242bd2d519d7 ("sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs

[ Upstream commit df5a8ec64eed7fe45b556cfff503acd6429ab817 ]

Up until commit 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod
functions where possible"), the _cansleep variants of the gpio_ API was
used. After that commit and the change to gpiod_ API, the _cansleep()
was dropped. This then results in WARN_ON() when used with GPIO
devices which do sleep. Add back the _cansleep() to avoid this.

Fixes: 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fix strchange_flags name for Stream Change Event

[ Upstream commit fd82d61ba142f0b83463e47064bf5460aac57b6e ]

As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED
and SCTP_STREAM_CHANGE_FAILED should be used instead of
SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED.

To keep the compatibility, fix it by adding two macros.

Fixes: b444153fb5a6 ("sctp: add support for generating add stream change event notification")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: microchip: initialize mutex before use

[ Upstream commit 284fb78ed7572117846f8e1d1d8e3dbfd16880c2 ]

Initialize mutex before use.  Avoid kernel complaint when
CONFIG_DEBUG_LOCK_ALLOC is enabled.

Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qualcomm: rmnet: Fix incorrect assignment of real_dev

[ Upstream commit d02854dc1999ed3e7fd79ec700c64ac23ac0c458 ]

A null dereference was observed when a sysctl was being set
from userspace and rmnet was stuck trying to complete some actions
in the NETDEV_REGISTER callback. This is because the real_dev is set
only after the device registration handler completes.

sysctl call stack -

<6> Unable to handle kernel NULL pointer dereference at
    virtual address 00000108
<2> pc : rmnet_vnd_get_iflink+0x1c/0x28
<2> lr : dev_get_iflink+0x2c/0x40
<2>  rmnet_vnd_get_iflink+0x1c/0x28
<2>  inet6_fill_ifinfo+0x15c/0x234
<2>  inet6_ifinfo_notify+0x68/0xd4
<2>  ndisc_ifinfo_sysctl_change+0x1b8/0x234
<2>  proc_sys_call_handler+0xac/0x100
<2>  proc_sys_write+0x3c/0x4c
<2>  __vfs_write+0x54/0x14c
<2>  vfs_write+0xcc/0x188
<2>  SyS_write+0x60/0xc0
<2>  el0_svc_naked+0x34/0x38

device register call stack -

<2>  notifier_call_chain+0x84/0xbc
<2>  raw_notifier_call_chain+0x38/0x48
<2>  call_netdevice_notifiers_info+0x40/0x70
<2>  call_netdevice_notifiers+0x38/0x60
<2>  register_netdevice+0x29c/0x3d8
<2>  rmnet_vnd_newlink+0x68/0xe8
<2>  rmnet_newlink+0xa0/0x160
<2>  rtnl_newlink+0x57c/0x6c8
<2>  rtnetlink_rcv_msg+0x1dc/0x328
<2>  netlink_rcv_skb+0xac/0x118
<2>  rtnetlink_rcv+0x24/0x30
<2>  netlink_unicast+0x158/0x1f0
<2>  netlink_sendmsg+0x32c/0x338
<2>  sock_sendmsg+0x44/0x60
<2>  SyS_sendto+0x150/0x1ac
<2>  el0_svc_naked+0x34/0x38

Fixes: b752eff5be24 ("net: qualcomm: rmnet: Implement ndo_get_iflink")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: Protect stop from timeout

[ Upstream commit 7cb6a2a2c72c1ed8f42fb01f1a661281b568dead ]

A timing hazard exists when the network interface is stopped that
allows a watchdog timeout to be processed by a separate core in
parallel. This creates the potential for the timeout handler to
wake the queues while the driver is shutting down, or access
registers after their clocks have been removed.

The more common case is that the watchdog timeout will produce a
warning message which doesn't lead to a crash. The chances of this
are greatly increased by the fact that bcm_sysport_netif_stop stops
the transmit queues which can easily precipitate a watchdog time-
out because of stale trans_start data in the queues.

This commit corrects the behavior by ensuring that the watchdog
timeout is disabled before enterring bcm_sysport_netif_stop. There
are currently only two users of the bcm_sysport_netif_stop function:
close and suspend.

The close case already handles the issue by exiting the RUNNING
state before invoking the driver close service.

The suspend case now performs the netif_device_detach to exit the
PRESENT state before the call to bcm_sysport_netif_stop rather than
after it.

These behaviors prevent any future scheduling of the driver timeout
service during the window. The netif_tx_stop_all_queues function
in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure
synchronization with any transmit or timeout threads that may
already be executing on other cores.

For symmetry, the netif_device_attach call upon resume is moved to
after the call to bcm_sysport_netif_start. Since it wakes the transmit
queues it is not necessary to invoke netif_tx_start_all_queues from
bcm_sysport_netif_start so it is moved into the driver open service.

Fixes: 40755a0fce17 ("net: systemport: add suspend and resume support")
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tuntap: fix multiqueue rx

[ Upstream commit 8ebebcba559a1bfbaec7bbda64feb9870b9c58da ]

When writing packets to a descriptor associated with a combined queue, the
packets should end up on that queue.

Before this change all packets written to any descriptor associated with a
tap interface end up on rx-0, even when the descriptor is associated with a
different queue.

The rx traffic can be generated by either of the following.
  1. a simple tap program which spins up multiple queues and writes packets
     to each of the file descriptors
  2. tx from a qemu vm with a tap multiqueue netdev

The queue for rx traffic can be observed by either of the following (done
on the hypervisor in the qemu case).
  1. a simple netmap program which opens and reads from per-queue
     descriptors
  2. configuring RPS and doing per-cpu captures with rxtxcpu

Alternatively, if you printk() the return value of skb_get_rx_queue() just
before each instance of netif_receive_skb() in tun.c, you will get 65535
for every skb.

Calling skb_record_rx_queue() to set the rx queue to the queue_index fixes
the association between descriptor and rx queue.

Signed-off-by: Matthew Cover <matthew.cover@stackpath.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tg3: Add PHY reset for 5717/5719/5720 in change ring and flow control paths

[ Upstream commit 59663e42199c93d1d7314d1446f6782fc4b1eb81 ]

This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change
ring and flow control paths. This patch solves the RX hang while doing
continuous ring or flow control parameters with heavy traffic from peer.

Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: not allow to set asoc prsctp_enable by sockopt

[ Upstream commit cc3ccf26f0649089b3a34a2781977755ea36e72c ]

As rfc7496#section4.5 says about SCTP_PR_SUPPORTED:

   This socket option allows the enabling or disabling of the
   negotiation of PR-SCTP support for future associations.  For existing
   associations, it allows one to query whether or not PR-SCTP support
   was negotiated on a particular association.

It means only sctp sock's prsctp_enable can be set.

Note that for the limitation of SCTP_{CURRENT|ALL}_ASSOC, we will
add it when introducing SCTP_{FUTURE|CURRENT|ALL}_ASSOC for linux
sctp in another patchset.

v1->v2:
  - drop the params.assoc_id check as Neil suggested.

Fixes: 28aa4c26fce2 ("sctp: add SCTP_PR_SUPPORTED on sctp sockopt")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net-gro: reset skb->pkt_type in napi_reuse_skb()

[ Upstream commit 33d9a2c72f086cbf1087b2fd2d1a15aa9df14a7f ]

eth_type_trans() assumes initial value for skb->pkt_type
is PACKET_HOST.

This is indeed the value right after a fresh skb allocation.

However, it is possible that GRO merged a packet with a different
value (like PACKET_OTHERHOST in case macvlan is used), so
we need to make sure napi->skb will have pkt_type set back to
PACKET_HOST.

Otherwise, valid packets might be dropped by the stack because
their pkt_type is not PACKET_HOST.

napi_reuse_skb() was added in commit 96e93eab2033 ("gro: Add
internal interfaces for VLAN"), but this bug always has
been there.

Fixes: 96e93eab2033 ("gro: Add internal interfaces for VLAN")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF

[ Upstream commit 7ddacfa564870cdd97275fd87decb6174abc6380 ]

Preethi reported that PMTU discovery for UDP/raw applications is not
working in the presence of VRF when the socket is not bound to a device.
The problem is that ip6_sk_update_pmtu does not consider the L3 domain
of the skb device if the socket is not bound. Update the function to
set oif to the L3 master device if relevant.

Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack")
Reported-by: Preethi Ramachandra <preethir@juniper.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip_tunnel: don't force DF when MTU is locked

[ Upstream commit 16f7eb2b77b55da816c4e207f3f9440a8cafc00a ]

The various types of tunnels running over IPv4 can ask to set the DF
bit to do PMTU discovery. However, PMTU discovery is subject to the
threshold set by the net.ipv4.route.min_pmtu sysctl, and is also
disabled on routes with "mtu lock". In those cases, we shouldn't set
the DF bit.

This patch makes setting the DF bit conditional on the route's MTU
locking state.

This issue seems to be older than git history.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: fix accelerated VLAN handling

[ Upstream commit e84b47941e15e6666afb8ee8b21d1c3fc1a013af ]

Don't request tag insertion when it isn't present in outgoing skb.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

flow_dissector: do not dissect l4 ports for fragments

[ Upstream commit 62230715fd2453b3ba948c9d83cfb3ada9169169 ]

Only first fragment has the sport/dport information,
not the following ones.

If we want consistent hash for all fragments, we need to
ignore ports even for first fragment.

This bug is visible for IPv6 traffic, if incoming fragments
do not have a flow label, since skb_get_hash() will give
different results for first fragment and following ones.

It is also visible if any routing rule wants dissection
and sport or dport.

See commit 5e5d6fed3741 ("ipv6: route: dissect flow
in input path if fib rules need it") for details.

[edumazet] rewrote the changelog completely.

Fixes: 06635a35d13d ("flow_dissect: use programable dissector in skb_flow_dissect and friends")
Signed-off-by: 배석진 <soukjin.bae@samsung.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.82

gpio: brcmstb: release the bgpio lock during irq handlers

commit 142c168e0e50164e67c9399c28dedd65a307cfe5 upstream.

The basic memory-mapped GPIO controller lock must be released
before calling the registered GPIO interrupt handlers to allow
the interrupt handlers to access the hardware.

Examples of why a GPIO interrupt handler might want to access
the GPIO hardware include an interrupt that is configured to
trigger on rising and falling edges that needs to read the
current level of the input to know how to respond, or an
interrupt that causes a change in a GPIO output in the same
bank. If the lock is not released before enterring the handler
the hardware accesses will deadlock when they attempt to grab
the lock.

Since the lock is only needed to protect the calculation of
unmasked pending interrupts create a dedicated function to
perform this and hide the complexity.

Fixes: 19a7b6940b78 ("gpio: brcmstb: Add interrupt and wakeup source support")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-loop: fix kernel oops in case of unhandled command

commit 11d9ea6f2ca69237d35d6c55755beba3e006b106 upstream.

When nvmet_req_init() fails, __nvmet_req_complete() is called
to handle the target request via .queue_response(), so
nvme_loop_queue_response() shouldn't be called again for
handling the failure.

This patch fixes this case by the following way:

- move blk_mq_start_request() before nvmet_req_init(), so
nvme_loop_queue_response() may work well to complete this
host request

- don't call nvme_cleanup_cmd() which is done in nvme_loop_complete_rq()

- don't call nvme_loop_queue_response() which is done via
.queue_response()

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[trimmed changelog]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: Never set console_may_schedule in console_trylock()

commit fd5f7cde1b85d4c8e09ca46ce948e008a2377f64 upstream.

This patch, basically, reverts commit 6b97a20d3a79 ("printk:
set may_schedule for some of console_trylock() callers").
That commit was a mistake, it introduced a big dependency
on the scheduler, by enabling preemption under console_sem
in printk()->console_unlock() path, which is rather too
critical. The patch did not significantly reduce the
possibilities of printk() lockups, but made it possible to
stall printk(), as has been reported by Tetsuo Handa [1].

Another issues is that preemption under console_sem also
messes up with Steven Rostedt's hand off scheme, by making
it possible to sleep with console_sem both in console_unlock()
and in vprintk_emit(), after acquiring the console_sem
ownership (anywhere between printk_safe_exit_irqrestore() in
console_trylock_spinning() and printk_safe_enter_irqsave()
in console_unlock()). This makes hand off less likely and,
at the same time, may result in a significant amount of
pending logbuf messages. Preempted console_sem owner makes
it impossible for other CPUs to emit logbuf messages, but
does not make it impossible for other CPUs to append new
messages to the logbuf.

Reinstate the old behavior and make printk() non-preemptible.
Should any printk() lockup reports arrive they must be handled
in a different way.

[1] http://lkml.kernel.org/r/201603022101.CAH73907.OVOOMFHFFtQJSL%20()%20I-love%20!%20SAKURA%20!%20ne%20!%20jp
Fixes: 6b97a20d3a79 ("printk: set may_schedule for some of console_trylock() callers")
Link: http://lkml.kernel.org/r/20180116044716.GE6607@jagdpanzerIV
To: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: akpm@linux-foundation.org
Cc: linux-mm@kvack.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: check whiteout in ovl_create_over_whiteout()

commit 5e1275808630ea3b2c97c776f40e475017535f72 upstream.

Kaixuxia repors that it's possible to crash overlayfs by removing the
whiteout on the upper layer before creating a directory over it.  This is a
reproducer:

 mkdir lower upper work merge
 touch lower/file
 mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge
 rm merge/file
 ls -al merge/file
 rm upper/file
 ls -al merge/
 mkdir merge/file

Before commencing with a vfs_rename(..., RENAME_EXCHANGE) verify that the
lookup of "upper" is positive and is a whiteout, and return ESTALE
otherwise.

Reported by: kaixuxia <xiakaixu1987@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: e9be9d5e76e3 ("overlay filesystem")
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_XEN_PV breaks xen_create_contiguous_region on ARM

commit f9005571701920551bcf54a500973fb61f2e1eda upstream.

xen_create_contiguous_region has now only an implementation if
CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but
we do have an implementation of xen_create_contiguous_region which is
required for swiotlb-xen to work correctly (although it just sets
*dma_handle).

[backport: remove change to xen_remap_pfn]

Cc: <stable@vger.kernel.org> # 4.12
Fixes: 16624390816c ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds")
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: Jeff.Kubascik@dornerworks.com
CC: Jarvis.Roach@dornerworks.com
CC: Nathan.Studer@dornerworks.com
CC: vkuznets@redhat.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: julien.grall@arm.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/execlists: Force write serialisation into context image vs execution

commit 0a823e8fd4fd67726697854578f3584ee3a49b1d upstream.

Ensure that the writes into the context image are completed prior to the
register mmio to trigger execution. Although previously we were assured
by the SDM that all writes are flushed before an uncached memory
transaction (our mmio write to submit the context to HW for execution),
we have empirical evidence to believe that this is not actually the
case.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656
References: https://bugs.freedesktop.org/show_bug.cgi?id=108315
References: https://bugs.freedesktop.org/show_bug.cgi?id=106887
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit 987abd5c62f92ee4970b45aa077f47949974e615)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Mark pin flags as u64

commit 0014868b9c3c1dda1de6711cf58c3486fb422d07 upstream.

Since the flags are being used to operate on a u64 variable, they too
need to be marked as such so that the inverses are full width (and not
zero extended on 32b kernels and bdw+).

Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk
(cherry picked from commit 83b466b1dc5f0b4d33f0a901e8b00197a8f3582d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Don't oops during modeset shutdown after lpe audio deinit

commit 6a8915d0f8cf323e1beb792a33095cf652db4056 upstream.

We deinit the lpe audio device before we call
drm_atomic_helper_shutdown(), which means the platform device
may already be gone when it comes time to shut down the crtc.
As we don't know when the last reference to the platform
device gets dropped by the audio driver we can't assume that
the device and its data are still around when turning off the
crtc. Mark the platform device as gone as soon as we do the
audio deinit.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit f45a7977d1140c11f334e01a9f77177ed68e3bfa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/hdmi: Add HDMI 2.0 audio clock recovery N values

commit 6503493145cba4413ecd3d4d153faeef4a1e9b85 upstream.

HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value
mode instead of HDMI specification values.

V2: Fix 88.2 Hz N value

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com
(cherry picked from commit 5a400aa3c562c4a726b4da286e63c96db905ade1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Large page offsets for pread/pwrite

commit ab0d6a141843e0b4b2709dfd37b53468b5452c3a upstream.

Handle integer overflow when computing the sub-page length for shmem
backed pread/pwrite.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012140228.29783-1-chris@chris-wilson.co.uk
(cherry picked from commit a5e856a5348f6cd50889d125c40bbeec7328e466)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Skip vcpi allocation for MSTB ports that are gone

commit c02ba4ef16eefe663fdefcccaa57fad32d5481bf upstream.

Since we need to be able to allow DPMS on->off prop changes after an MST
port has disappeared from the system, we need to be able to make sure we
can compute a config for the resulting atomic commit. Currently this is
impossible when the port has disappeared, since the VCPI slot searching
we try to do in intel_dp_mst_compute_config() will fail with -EINVAL.

Since the only commits we want to allow on no-longer-present MST ports
are ones that shut off display hardware, we already know that no VCPI
allocations are needed. So, hardcode the VCPI slot count to 0 when
intel_dp_mst_compute_config() is called on an MST port that's gone.

Changes since V4:
- Don't use mst_port_gone at all, just check whether or not the drm
  connector is registered - Daniel Vetter

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com
(cherry picked from commit f67207d78ceaf98b7531bc22df6f21328559c8d4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Don't unset intel_connector->mst_port

commit 80c188695a77eddaa6e8885510ff4ef59fd478c3 upstream.

Currently we set intel_connector->mst_port to NULL to signify that the
MST port has been removed from the system so that we can prevent further
action on the port such as connector probes, mode probing, etc.
However, we're going to need access to intel_connector->mst_port in
order to fixup ->best_encoder() so that it can always return the correct
encoder for an MST port to prevent legacy DPMS prop changes from
failing. This should be safe, so instead keep intel_connector->mst_port
always set and instead just check the status of
drm_connector->regustered to signify whether or not the connector has
disappeared from the system.

Changes since v2:
- Add a comment to mst_port_gone (Jani Nikula)
- Change mst_port_gone to a u8 instead of a bool, per the kernel bot.
  Apparently bool is discouraged in structs these days
Changes since v4:
- Don't use mst_port_gone at all! Just check if the connector is
  registered or not - Daniel Vetter

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-4-lyude@redhat.com
(cherry picked from commit 6ed5bb1fbad34382c8cfe9a9bf737e9a43053df5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Restore vblank interrupts earlier

commit 7cada4d0b7a0fb813dbc9777fec092e9ed0546e9 upstream.

Plane sanitation needs vblank interrupts (on account of CxSR disable).
So let's restore vblank interrupts earlier.

v2: Make it actually build
v3: Add comment to explain why we need this (Daniel)

Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003144951.4397-1-ville.syrjala@linux.intel.com
(cherry picked from commit 68bc30deac625b8be8d3950b30dc93d09a3645f5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp_mst: Check if primary mstb is null

commit 23d8003907d094f77cf959228e2248d6db819fa7 upstream.

Unfortunately drm_dp_get_mst_branch_device which is called from both
drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely
on that mgr->mst_primary is not NULL, which seem to be wrong as it can be
cleared with simultaneous mode set, if probing fails or in other case.
mgr->lock mutex doesn't protect against that as it might just get
assigned to NULL right before, not simultaneously.

There are currently bugs 107738, 108616 bugs which crash in
drm_dp_get_mst_branch_device, caused by this issue.

v2: Refactored the code, as it was nicely noticed.
    Fixed Bugzilla bug numbers(second was 108616, but not 108816)
    and added links.

[changed title and added stable cc]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738
Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: Check backlight IDs are >= 0, not > 0

commit dc854914999d5d52ac1b31740cb0ea8d89d0372e upstream.

Remember, ida IDs start at 0, not 1!

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add missing CHIP_HAINAN in amdgpu_ucode_get_load_type

commit d9997b64c52b70bd98c48f443f068253621d1ffc upstream.

This caused a confusing error message, but there is functionally
no problem since the default method is DIRECT.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: Allow driver to be shutdown on reboot/kexec

commit 7f3ef5dedb146e3d5063b6845781ad1bb59b92b5 upstream.

Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.

In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).

A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/arm/libstub: Pack FDT after populating it

commit 72a58a63a164b4e9d2d914e65caeb551846883f1 upstream.

Commit:

  24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")

increased the allocation size for the FDT image created by the stub to a
fixed value of 2 MB, to simplify the former code that made several
attempts with increasing values for the size. This is reasonable
given that the allocation is of type EFI_LOADER_DATA, which is released
to the kernel unless it is explicitly memblock_reserve()d by the early
boot code.

However, this allocation size leaked into the 'size' field of the FDT
header metadata, and so the entire allocation remains occupied by the
device tree binary, even if most of it is not used to store device tree
information.

So call fdt_pack() to shrink the FDT data structure to its minimum size
after populating all the fields, so that the remaining memory is no
longer wasted.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/swapfile.c: use kvzalloc for swap_info_struct allocation

commit 873d7bcfd066663e3e50113dc4a0de19289b6354 upstream.

Commit a2468cc9bfdf ("swap: choose swap device according to numa node")
changed 'avail_lists' field of 'struct swap_info_struct' to an array.
In popular linux distros it increased size of swap_info_struct up to 40
Kbytes and now swap_info_struct allocation requires order-4 page.
Switch to kvzmalloc allows to avoid unexpected allocation failures.

Link: http://lkml.kernel.org/r/fc23172d-3c75-21e2-d551-8b1808cbe593@virtuozzo.com
Fixes: a2468cc9bfdf ("swap: choose swap device according to numa node")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!

commit 5e41540c8a0f0e98c337dda8b391e5dda0cde7cf upstream.

This bug has been experienced several times by the Oracle DB team.  The
BUG is in remove_inode_hugepages() as follows:

/*
 * If page is mapped, it was faulted in after being
 * unmapped in caller.  Unmap (again) now after taking
 * the fault mutex.  The mutex will prevent faults
 * until we finish removing the page.
 *
 * This race can only happen in the hole punch case.
 * Getting here in a truncate operation is a bug.
 */
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);

In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code.  Consider the following:

 - Process A maps a hugetlbfs file of sufficient size and alignment
   (PUD_SIZE) that a pmd page could be shared.

 - Process B maps the same hugetlbfs file with the same size and
   alignment such that a pmd page is shared.

 - Process B then calls mprotect() to change protections for the mapping
   with the shared pmd. As a result, the pmd is 'unshared'.

 - Process B then calls mprotect() again to chage protections for the
   mapping back to their original value. pmd remains unshared.

 - Process B then forks and process C is created. During the fork
   process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
   tables. Copying page tables for hugetlb mappings is done in the
   routine copy_hugetlb_page_range.

In copy_hugetlb_page_range(), the destination pte is obtained by:

dst_pte = huge_pte_alloc(dst, addr, sz);

If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table.  In the situation above, process C could share with
either process A or process B.  Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.

However, the check for pmd sharing in copy_hugetlb_page_range is:

/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;

Since process C is sharing with process A instead of process B, the
above test fails.  The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte.  It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page.  This is how we end up with an elevated map count.

To solve, check the dst_pte entry for huge_pte_none.  If !none, this
implies PMD sharing so do not copy.

Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn

commit 1c23b4108d716cc848b38532063a8aca4f86add8 upstream.

gcc-8 complains about the prototype for this function:

  lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes]

This is actually a GCC's bug. In GCC internals
__ubsan_handle_builtin_unreachable() declared with both 'noreturn' and
'const' attributes instead of only 'noreturn':

   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210

Workaround this by removing the noreturn attribute.

[aryabinin: add information about GCC bug in changelog]
Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: user - fix leaking uninitialized memory to userspace

commit f43f39958beb206b53292801e216d9b8a660f087 upstream.

All bytes of the NETLINK_CRYPTO report structures must be initialized,
since they are copied to userspace.  The change from strncpy() to
strlcpy() broke this.  As a minimal fix, change it back.

Fixes: 4473710df1f8 ("crypto: user - Prepare for CRYPTO_MAX_ALG_NAME expansion")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Put bitmap buffers in put_super

commit 10283ea525d30f2e99828978fd04d8427876a7ad upstream.

gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects
attached to the resource group glocks.  That function should release the
buffers attached to the gfs2_bitmap objects (bi_bh), but the call to
gfs2_rgrp_brelse for doing that is missing.

When gfs2_releasepage later runs across these buffers which are still
referenced, it refuses to free them.  This causes the pages the buffers
are attached to to remain referenced as well.  With enough mount/unmount
cycles, the system will eventually run out of memory.

Fix this by adding the missing call to gfs2_rgrp_brelse in
gfs2_clear_rgrpd.

(Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.)

Fixes: 39b0f1e92908 ("GFS2: Don't brelse rgrp buffer_heads every allocation")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

configfs: replace strncpy with memcpy

commit 1823342a1f2b47a4e6f5667f67cd28ab6bc4d6cd upstream.

gcc 8.1.0 complains:

fs/configfs/symlink.c:67:3: warning:
'strncpy' output truncated before terminating nul copying as many
bytes from a string as its length
fs/configfs/symlink.c: In function 'configfs_get_link':
fs/configfs/symlink.c:63:13: note: length computed here

Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix leaked notify reply

commit 7fabaf303458fcabb694999d6fa772cc13d4e217 upstream.

fuse_request_send_notify_reply() may fail if the connection was reset for
some reason (e.g. fs was unmounted).  Don't leak request reference in this
case.  Besides leaking memory, this resulted in fc->num_waiting not being
decremented and hence fuse_wait_aborted() left in a hanging and unkillable
state.

Fixes: 2d45ba381a74 ("fuse: add retrieve request")
Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests")
Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> #v2.6.36
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix use-after-free in fuse_direct_IO()

commit ebacb81273599555a7a19f7754a1451206a5fc4f upstream.

In async IO blocking case the additional reference to the io is taken for
it to survive fuse_aio_complete(). In non blocking case this additional
reference is not needed, however we still reference io to figure out
whether to wait for completion or not. This is wrong and will lead to
use-after-free. Fix it by storing blocking information in separate
variable.

This was spotted by KASAN when running generic/208 fstest.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 744742d692e3 ("fuse: Add reference counting for fuse_io_priv")
Cc: <stable@vger.kernel.org> # v4.6
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: hctosys: Add missing range error reporting

commit 7ce9a992ffde8ce93d5ae5767362a5c7389ae895 upstream.

Fix an issue with the 32-bit range error path in `rtc_hctosys' where no
error code is set and consequently the successful preceding call result
from `rtc_read_time' is propagated to `rtc_hctosys_ret'.  This in turn
makes any subsequent call to `hctosys_show' incorrectly report in sysfs
that the system time has been set from this RTC while it has not.

Set the error to ERANGE then if we can't express the result due to an
overflow.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Fixes: b3a5ac42ab18 ("rtc: hctosys: Ensure system time doesn't overflow time_t")
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: COPY and CLONE operations require the saved filehandle to be set

commit 01310bb7c9c98752cc763b36532fab028e0f8f81 upstream.

Make sure we have a saved filehandle, otherwise we'll oops with a null
pointer dereference in nfs4_preprocess_stateid_op().

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunrpc: correct the computation for page_ptr when truncating

commit 5d7a5bcb67c70cbc904057ef52d3fcfeb24420bb upstream.

When truncating the encode buffer, the page_ptr is getting
advanced, causing the next page to be skipped while encoding.
The page is still included in the response, so the response
contains a page of bogus data.

We need to adjust the page_ptr backwards to ensure we encode
the next page into the correct place.

We saw this triggered when concurrent directory modifications caused
nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting
call to xdr_truncate_encode() corrupted the READDIR reply.

Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdb: print real address of pointers instead of hashed addresses

commit 568fb6f42ac6851320adaea25f8f1b94de14e40a upstream.

Since commit ad67b74d2469 ("printk: hash addresses printed with %p"),
all pointers printed with %p are printed with hashed addresses
instead of real addresses in order to avoid leaking addresses in
dmesg and syslog. But this applies to kdb too, with is unfortunate:

    Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry
    kdb> ps
    15 sleeping system daemon (state M) processes suppressed,
    use 'ps A' to see all.
    Task Addr       Pid   Parent [*] cpu State Thread     Command
    0x(ptrval)      329      328  1    0   R  0x(ptrval) *sh

    0x(ptrval)        1        0  0    0   S  0x(ptrval)  init
    0x(ptrval)        3        2  0    0   D  0x(ptrval)  rcu_gp
    0x(ptrval)        4        2  0    0   D  0x(ptrval)  rcu_par_gp
    0x(ptrval)        5        2  0    0   D  0x(ptrval)  kworker/0:0
    0x(ptrval)        6        2  0    0   D  0x(ptrval)  kworker/0:0H
    0x(ptrval)        7        2  0    0   D  0x(ptrval)  kworker/u2:0
    0x(ptrval)        8        2  0    0   D  0x(ptrval)  mm_percpu_wq
    0x(ptrval)       10        2  0    0   D  0x(ptrval)  rcu_preempt

The whole purpose of kdb is to debug, and for debugging real addresses
need to be known. In addition, data displayed by kdb doesn't go into
dmesg.

This patch replaces all %p by %px in kdb in order to display real
addresses.

Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdb: use correct pointer when 'btc' calls 'btt'

commit dded2e159208a9edc21dd5c5f583afa28d378d39 upstream.

On a powerpc 8xx, 'btc' fails as follows:

Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0x0

when booting the kernel with 'debug_boot_weak_hash', it fails as well

Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0xba99ad80

On other platforms, Oopses have been observed too, see
https://github.com/linuxppc/linux/issues/139

This is due to btc calling 'btt' with %p pointer as an argument.

This patch replaces %p by %px to get the real pointer value as
expected by 'btt'

Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>