docs: andes-ae350.md: fix watchdog nodename in dts example

The example should use watchdog as nodename instead of wdt.
This is defined in watchdog common schemas:
https://github.com/torvalds/linux/blob/v6.0/Documentation/devicetree/bindings/watchdog/watchdog.yaml#L19

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: platform: Update AE350 and generic platform documentation

Update compile option and platform compatible string for AE350 and
add it to the generic platform list.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic/andes: Enable generic platform support for AE350

We move andes directory to platform/generic as the necessary fdt
drivers are available, the users can enable the console, timer, ipi,
irqchip and reset devices by adding device tree nodes stated in the
docs/platform/andes-ae350.md.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

firmware: Minor optimization for relocate

The t3 register stores the address of _load_end. If relocation is not
required, it is unnecessary to calculate the address of _load_end.

This can reduce the operation time of two instructions.

Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: fix fdt_parse_aclint_node()

After determining cpu_offset we have to check this variable and not
cpu_intc_offset.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: simplify fdt_translate_address()

Don't assign a value to offset which is never used.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: fix fdt_parse_plicsw_node()

cpu_offset and cpu_intc_offset must be int to detect failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().

After determining cpu_offset we have to check this value and not
cpu_intc_offset.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: fix fdt_parse_plmt_node()

cpu_offset, cpu_intc_offset must be int to discover failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().

After determining cpu_offset we have to check this value and not
cpu_intc_offset.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: simplify fdt_parse_plicsw_node()

We should not check !plicsw_base || !size twice.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: simplify fdt_parse_plmt_node()

We should not check !plmt_base || !plmt_size twice.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: sbi: Fix is_region_valid()

When order is equal to __riscv_xlen, the shift operation will not perform
any operation, which will cause reg->base & (BIT(reg->order) - 1) to always
be 0, and the condition has not been established.

This patch fixes this bug.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Simplified mmio match checking

We simplify the mmio flag matching in sbi_domain_check_addr().

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: bugfix for handling platform paths

If the path where this repo is located contains the platform name on
it, the original Makefile replaced its occurrences from the path making
it an invalid path. This commit prevents this behavior replacing only
the last part of the path as intended.

Signed-off-by: Alejandro Cabrera Aldaya <aldaya@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: replace `echo` with `printf` for compatibility

I don't know why but `echo -n` didn't work for me. macOS supports
the `-n` option but it doesn't work in the makefile. What it does
instead is it literally writes `-n` to the file and then also
leaves a newline at the end.

I'm using GNU Make 4.4 (`gmake` from Homebrew).

Signed-off-by: KaDiWa <kalle.wachsmuth@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic/allwinner: Remove ghostly type cast

Corrected the same parameter of writel_relaxed in sun20i_d1_riscv_cfg_init
to be u32 for a while and u64 for a while.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic/allwinner: Remove unused header files

Remove "#include <sbi/sbi_console.h>"

Signed-off-by: Leizheng Zhang <zhangleizheng@eswincomputing.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Xiang W <wxjstz@126.com>

firmware: payloads: Optimize usage of "ALIGN"

Delete the redundant "ALIGN" and adjust the position of "ALIGN"

Signed-off-by: Leizheng Zhang <zhangleizheng@eswincomputing.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: sbi_ecall: Split up sbi_ecall_replace

Split up sbi_ecall_replace so that each extension is in its individual
file.

Also reorganize the corresponding section in lib/sbi/objects.mk so
that it is grouped by extension, now that the object file targets are
split up.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/serial: Fix semihosting compile error using LLVM

We fix the following semihosting compile error observed using LLVM:
lib/utils/serial/semihosting.c:158:12: error: result of comparison of constant -1 with expression of type 'char' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
                ret = ch > -1 ? ch : -1;
                      ~~ ^ ~~

Fixes: 7f09fba86e43 ("lib: utils/serial: add semihosting support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

docs: fix some typos

Corrected the typos of some documents in the 'docs' folder.

Signed-off-by: zhangdongdong <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt: Simplified code

Simplified fdt_parse_xxx_uart_node which direct call
fdt_parse_uart_node_common.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt: Remove redundant code

uart->reg_offset and uart->reg_io_width are only used on uart8250 and
not required on other platforms. Remove for sifive and gaisler.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_ecall: Add Kconfig option for each extension

For each SBI extension, we:

- Add a Kconfig option for it
- Add the extension to sbi_ecall_exts only if the extension is enabled
- Add the corresponding sbi_ecall_* object file only if the extension is
  enabled

Special cases are as follows:

- The legacy extensions are lumped together as one 'big' extension, as
  has always been the case in OpenSBI code.
- The platform-defined vendor extensions are regarded as one extension.
- The Base extension cannot be disabled.
- sbi_ecall_replace implements multiple extensions, so it's not easy to
  avoid linking it in. Enable it always, and use #ifdef to
  disable/enable individual extensions.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_ecall: Generate extensions list with carray

Instead of hard-coding the list of extensions in C code, use carray to
generate the list of extensions.

Using carray makes adding and removing extensions slightly cleaner. This
also paves the way for using Kconfig to disable unneeded extensions.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: Add rules for carray sources in lib/sbi

Add back the missing rules needed to build carray files in lib/sbi. This
allows future usage of carray in lib/sbi.

Fixes: de80e9337d81 ("Makefile: Compile lib/utils sources separately for each platform")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs/firmware: update the document

Since
commit 9c07c513aa9b ("firmware:Remove FW_PAYLOAD_FDT_PATH compile-time option"),
the section where FDT would be embedded in has changed from *.text* to *.rodata*,
but some places in fw_payload.md and fw.md are still *.text*.
This patch updates the document.

Signed-off-by: Yangjie Zhang <pyjmstr@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: Add cscope support

Add cscope support so that running `make cscope` will generate/update
cscope files used for source code browsing, while running `make
distclean` will remove the cscope files.

Also add entry in .gitignore to ignore generated cscope files.

Signed-off-by: Tan En De <ende.tan@linux.starfivetech.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

docs: andes-ae350.md: Update ae350 documentation for fdt driver support

We update ae350 documentation to add details about platform device tree.
The nodes and their properties must be provided to properly initialize
data of underlying hardware and access their mmio registers.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Add AE350 domain support

Add domains_init platform hook for Andes AE350, users can add domain
description in device tree and select FDT domain support in Kconfig
to achieve system-level partitioning.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/ipi: Add Andes fdt ipi driver support

Move Andes PLICSW ipi device to fdt ipi framework, this patch is based
on Leo's modified IPI scheme on PLICSW.

Current IPI scheme uses bit 0 of pending reigster on PLICSW to send IPI
from hart 0 to hart 7, but bit 0 needs to be hardwired to 0 according
to spec. After some investigation, self-IPI seems to be seldom or never
used, so we re-order the IPI scheme to support 8 core platforms.

dts example (Quad-core AX45MP):

  plicsw: interrupt-controller@e6400000 {
          compatible = "andestech,plicsw";
          reg = <0x00000000 0xe6400000 0x00000000 0x00400000>;
          interrupts-extended = <&CPU0_intc 3
                                 &CPU1_intc 3
                                 &CPU2_intc 3
                                 &CPU3_intc 3>;
          interrupt-controller;
          #address-cells = <2>;
          #interrupt-cells = <2>;
  };

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Add fw_platform_init for platform initialization

This patch adds fw_platform_init() to initialize ae350 platform.name
and platform.hart_count by parsing device tree.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Use fdt irqchip driver

Andes PLIC is compatible with plic driver. The PLIC base address and
number of source can be obtained by parsing the device tree.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/reset: Add Andes fdt reset driver support

Add ATCWDT200 as reset device of AE350 platform, this driver requires
SMU to program the reset vector registers before triggering WDT software
restart signal.

dts example:

  smu@f0100000 {
    compatible = "andestech,atcsmu";
    reg = <0x00000000 0xf0100000 0x00000000 0x00001000>;
  };

  wdt: wdt@f0500000 {
    compatible = "andestech,atcwdt200";
    reg = <0x00000000 0xf0500000 0x00000000 0x00001000>;
    interrupts = <3 4>;
    interrupt-parent = <&plic0>;
    clock-frequency = <15000000>;
  };

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/timer: Add Andes fdt timer support

Since we can get the PLMT base address and timer frequency from
device tree, move plmt timer device to fdt timer framework.

dts example (Quad-core AX45MP):

  cpus {
      ...
      timebase-frequency = <0x3938700>;
      ...
  }
  soc {
      ...
      plmt0@e6000000 {
          compatible = "andestech,plmt0";
          reg = <0x00 0xe6000000 0x00 0x100000>;
          interrupts-extended = <&cpu0_intc 0x07
                                 &cpu1_intc 0x07
                                 &cpu2_intc 0x07
                                 &cpu3_intc 0x07>;
      };
      ...
  }

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Use fdt serial driver

Andes UART is compatible with uart8250 driver. We can use
fdt_serial_init() as platform console init hook.

dts example:

  serial0: serial@f0300000 {
    compatible = "andestech,uart16550", "ns16550a";
    reg = <0x00000000 0xf0300000 0x00000000 0x00001000>;
    interrupts = <9 4>;
    interrupt-parent = <&plic0>;
    clock-frequency = <19660800>;
    current-speed = <38400>;
    reg-shift = <2>;
    reg-offset = <32>;
    reg-io-width = <4>;
    no-loopback-test = <1>;
  };

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Use kconfig to set platform version and default name

This patch makes andes platform name and version can be set in
menuconfig interface.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Remove enabling cache from an350_final_init

The boot-time cache operations have been handled by U-boot SPL, so we
can drop duplicate code.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Add sbi_domain_root_add_memrange() API

This patch generalizes the logic to add a memory range with desired
alignment and flags of consecutive regions to the root domain.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: sbi: Fix grammar in comment

Fix minor grammar issue in function description.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Fix typo in comment

%s/is is/is

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: sbi: Fix typo in comment

%s/Priviledge/Privilege

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: allwinner: add support for c9xx pmu

With the T-HEAD C9XX cores being designed before or during ratification
of the SSCOFPMF extension, they implement a PMU extension that behaves
very similar but not equal to it by providing overflow interrupts though
in a slightly different registers format.

The sun20i-d1 is using this core. So implement the necessary overrides
to allow its pmu to be used via the standard sbi-pmu extension.

For now it's also the only soc using this core, so keep the additional
code in the d1-space for now.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

platform: generic: add extensions_init handler and platform-override

Init of non-standard extensions is a platform-specific thing,
so allow generic platforms to do this via a platform-override.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

lib: sbi_platform: expose hart_features to extension_init callback

The platform-specific extension_init callback is supposed to
set specific things for the platform opensbi is running on.

So it's also the right place to override specific hart_features
if needed - when it's know that autodetection has provided
wrong results for example.

Suggested-by: Atish Patra <atishp@atishpatra.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

lib: sbi_hart: move hart_features struct to a public location

Platforms may need to override auto-detected hart features
in their override functions. So move the hart_features
struct to the sbi_hart.h header allowing us to pass it over
to platform-handlers.

Suggested-by: Atish Patra <atishp@atishpatra.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

lib: sbi_pmu: move pmu irq information into pmu itself

Don't spread checking for pmu extensions through the code
but instead introduce a sbi-pmu function that other code can
call to get the correct information about the existence of the
pmu interrupt.

Add a sbi_pmu_device override function to allow overridung this
bit as well if needed.

Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

docs: Fix some typos

We fix few typos in documentation.

Signed-off-by: zhangdongdong <zhangdongdong@eswincomputing.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs/firmware: Update FW_JUMP documentation

Add a tip for OpenSBI's FW_JUMP which helps
users avoid overwriting the kernel.

Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/serial: add semihosting support

We add RISC-V semihosting based serial console for JTAG based early
debugging.

The RISC-V semihosting specification is available at:
https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Fix sbi_strnlen wrong count decrement

count(maxlen) should not be decremented here

Fixes: 1901e8a287bc ("platform: Add minimal libc support.")
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt: Fix DT parsing in fdt_pmu_setup()

This patch does following fixes in fdt_pmu_setup():
1) If any of the event mapping DT property is absent or too small
   then don't skip parsing of other DT properties.
2) Return failure if sbi_pmu_add_hw_event_counter_map() fails.
3) Return failure if sbi_pmu_add_raw_event_counter_map() fails.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi_misaligned_ldst: Set GVA if not emulating

If a particular misaligned load or store cannot be emulated at all, for
the redirected trap, trap.gva is set to 0, but it should be the same as
mstatus[h].GVA of the original trap. Fix this so that if the trap is
destined for HS-mode, hstatus.GVA is then set correctly.

Fixes: 1c4ce74f5128 ("lib: sbi: Set gva when creating sbi_trap_info")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_trap: Add helper to get GVA in sbi_trap_regs

The GVA bit is in mstatus on RV64, and in mstatush in RV32. Refactor
code handling this in sbi_trap_handler into a helper function to extract
GVA from sbi_trap_regs, so that future code accessing GVA can be
XLEN-agnostic.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: pmu: extend bindings example for Unmatched

Extend example for Unmatched board to provide SBI PMU bindings
for generalized and cache event's where they are applicable.

Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: pmu: fix Unmatched example typo

bitmap for MHPMCOUNTERx should be 0x18 and not 0x0c, we check
against SBI_PMU_FIXED_CTR_MASK which assumes than first 3 bits are
dedicated to mcycle, mtime and minstret, u74 has 2 hardware counters.

Reported-by: Zhang Xin <zhangxin.xa@gmail.com>
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: sbi: Reduce includes in sbi_pmu.h

The sbi_pmu.h should only include minimal required headers whereas
sbi_pmu.c should include all required headers.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi: Print platform PMU device at boot-time

Let us print the platform PMU device name at the boot-time so that users
know whether the underlying platform has custom per-HART PMU operations.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi_pmu: Add custom PMU device operations

We extend SBI PMU implementation to allow custom PMU device operations
which a platform can use for platform specific quirks.

The custom PMU device operations added by this patch include:
1) Operations to allow a platform implement custom firmware events.
   These custom firmware events can be SBI vendor extension related
   events or platform specific per-HART events are not possible to
   count through HPM CSRs.
2) Operations to allow a platform implement custom way for enabling
   (or disabling) an overflow interrupt (e.g. T-Head C9xx).

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi_pmu: Simplify FW counters to reduce memory usage

Currently, we have 32 elements (i.e. SBI_PMU_FW_EVENT_MAX) array of
"struct sbi_pmu_fw_event" for each of 128 possible HARTs
(i.e. SBI_HARTMASK_MAX_BITS).

To reduce memory usage of OpenSBI, we update FW counter implementation
as follows:
1) Remove SBI_PMU_FW_EVENT_MAX
2) Remove "struct sbi_pmu_fw_event"
3) Create per-HART bitmap of XLEN bits to track FW counters
   which are started on each HART
4) Create per-HART uint64_t array to track values of FW
   counters on each HART.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi_pmu: Firmware counters are always 64 bits wide

As-per SBI specification, all firmware counters are always 64 bits
wide so let us update the SBI PMU implementation to reflect this fact.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi_pmu: Replace sbi_pmu_ctr_read() with sbi_pmu_ctr_fw_read()

The "read a firmware counter" SBI call should only work for firmware
counters so let us replace sbi_pmu_ctr_read() with sbi_pmu_ctr_fw_read()
which works only on firmware counters.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi_pmu: Remove "event_idx" member from struct sbi_pmu_fw_event

The "event_idx" member of struct sbi_pmu_fw_event is not used
anywhere so let us remove it.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

include: Remove sideleg and sedeleg

sideleg and sedeleg csrs are not part of riscv isa spec
anymore, these csrs were part of N extension which
is removed from the riscv isa specification.

These commits removed all traces of these csrs from
riscv spec (https://github.com/riscv/riscv-isa-manual) -

commit f8d27f805b65 ("Remove or downgrade more references to N extension (#674)")
commit b6cade07034d ("Remove N extension chapter for now")

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils: serial: Add Cadence UART driver

Add Cadence UART driver

Signed-off-by: Jun Liang Tan <junliang.tan@linux.starfivetech.com>
Signed-off-by: Wei Liang Lim <weiliang.lim@linux.starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Use the official extension name for AIA M-mode CSRs

The arch review of AIA spec is completed and we now have official
extension names for AIA: Smaia (M-mode AIA CSRs) and Ssaia (S-mode
AIA CSRs).

Refer, section 1.6 of the latest AIA v0.3.1 stable specification at
https://github.com/riscv/riscv-aia/releases/download/0.3.1-draft.32/riscv-interrupts-032.pdf)

Based on above, we update generic library to use "Smaia" extension
name for AIA M-mode CSRs.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi_illegal_insn: Fix FENCE.TSO emulation infinite trap loop

In case of missing "FENCE.TSO" instruction implementation,
opensbi can emulate the "FENCE.TSO" with "FENCE RW,RW", but
mepc was not incremented to continue from the next instruction
causing infinite trap.

Fixes: cb8271c8 ("lib: sbi_illegal_insn: Add emulation for fence.tso")
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>

lib: sbi_trap: Set hstatus.GVA when going to HS-mode

The privileged spec specifies that on a trap to HS-mode, hstatus.GVA
should be set to 1 if stval is written with a guest virtual address, and
to 0 otherwise. Implement this by setting hstatus.GVA to trap->gva when
redirecting traps to HS-mode.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_trap: Set hypervisor CSRs for HS-mode

The hypervisor CSRs hstatus, htval, htinst should always be set if the
trap is to be taken in HS-mode, regardless of which mode it came from.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Set gva when creating sbi_trap_info

In some cases the sbi_trap_info argument passed to sbi_trap_redirect is
created from scratch by filling its fields. Since we previously added a
gva field to struct sbi_trap_info, initialize gva in these cases also.

Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_trap: Save mstatus[h].GVA in trap->gva

The machine mode GVA field is available if the hypervisor extension is
implemented, and indicates if mtval is a guest virtual address. Add a
gva field to sbi_trap_info for this, and in __sbi_expected_trap_hext,
save mstatus[h].GVA to it, so that gva indicates if tval is a guest
virtual address. If the hypervisor extension is not implemented, always
set gva to 0.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: Add mstatus[h].GVA encodings

The machine mode GVA field is in mstatus for RV64 and mstatush for RV32,
and is available if the hypervisor extension is available. If an
exception occurs, we may need to redirect the trap to HS-mode, in which
case, hstatus.GVA should be set to same as the machine mode GVA bit.

Add MSTATUS_GVA for RV64, MSTATUSH_GVA for RV32, and their SHIFT
encodings. The SHIFT index is helpful in assembly code, since field
extraction can be implemented in only one register. In pseudocode:

- For RV32: gva = (mstatus >> MSTATUS_GVA_SHIFT) & 1;
- For RV64: gva = (mstatush >> MSTATUSH_GVA_SHIFT) & 1;

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: Fix typo related to object.mk

The "object.mk" name referred in top-level makefile should be
"objects.mk".

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

docs: Update documentation for kconfig support

We update all documentation files to:
1) Remove references to platform specific config.mk file since it is
   has been removed.
2) Add details about platform specific configs/defconfig and Kconfig
   files mandatory for each platform.
3) Add required packages in top-level README.md
4) Fix typo releated to object.mk in docs/platform/platform.md

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

platform: Remove redundant config.mk from all platforms

The options defined in config.mk can be specified in objects.mk of each
platform so let us remove config.mk from all platforms.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

platform: generic: Use kconfig to set platform version and default name

The generic platform version and default name should be set based
on kconfig options so that users can override it.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

platform: generic: Use kconfig for enabling/disabling overrides

We update generic platform to use kconfig for enabling/disabling
platform overrides. We also enable all platform overrides in generic
platform defconfig.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: utils/fdt: Use kconfig for enabling/disabling

We update FDT support makefile to use kconfig for enabling/disabling.
To avoid compilation errors, we also enable FDT for each platform.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: utils/gpio: Use kconfig for enabling/disabling drivers

We update gpio drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate gpio
drivers for each platform.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: utils/i2c: Use kconfig for enabling/disabling drivers

We update i2c drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate i2c
drivers for each platform.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: utils/irqchip: Use kconfig for enabling/disabling drivers

We update irqchip drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate irqchip
drivers for each platform.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: utils/ipi: Use kconfig for enabling/disabling drivers

We update ipi drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate ipi
drivers for each platform.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: utils/timer: Use kconfig for enabling/disabling drivers

We update timer drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate timer
drivers for each platform.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: utils/sys: Use kconfig for enabling/disabling drivers

We update system drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate system
drivers for each platform.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: utils/reset: Use kconfig for enabling/disabling drivers

We update reset drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate reset
drivers for each platform.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: utils/serial: Use kconfig for enabling/disabling drivers

We update serial drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate serial
drivers for each platform.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

Makefile: Compile lib/utils sources separately for each platform

Currently, if same build directory is used to compile two different
platforms then lib/utils objects are shared for these platforms.

We will be having platform specific configs to enable/disable drivers
in lib/utils and select compile time options for lib/utils sources.
This means lib/utils sources will now be compiled in a platform
specific way.

To tackle above, we update top-level Makefile as follows:
1) Don't create libsbiutils.a anymore because this can't be shared
   between platforms.
2) Compile lib/utils sources separately for each platform.
3) Add comments showing which make rules are for lib/sbi, lib/utils,
   firmware, and platform sources.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

Makefile: Add initial kconfig support for each platform

We extend the top-level makefile to allow kconfig based configuration
for each platform where each platform has it's own set of configs with
"defconfig" being the default config.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

scripts: Add Kconfiglib v14.1.0 under scripts directory

We adopt Kconfiglib v14.1.0 sources under scripts directory so that
top-level OpenSBI makefile can directly use Kconfiglib scripts without
expecting users to install a particular version of Kconfiglib on their
build system.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>

lib: sbi: Fix printf handling of long long

Read long long arguments directly using va_arg. Remove original hack for
RV32 that read a long long arg as two long args.

This un-breaks the case on RV64 where e.g. the long long is followed by
an odd number of ints:

    sbi_printf("%d %lld", (int) 1, (long long) 2LL);

Also remove the acnt variable, which is now unused.

Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/serial: Ensure baudrate is non-zero before using

RISC-V doesn't generate exceptions on divide-by-zero, but the result,
all bits set, is not likely what people expect either. In all cases
where we divide by baudrate there's a chance it's zero (when the DT
it came from is "bad"). To avoid difficult to debug situations, leave
baudrate dependent registers alone when baudrate is zero, as, also in
all cases, it appears we can skip initialization of those registers
and still [hopefully] have a functioning UART.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: serial: Clean up coding style in sifive-uart.c

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/serial: Initialize platform_uart_data to zero

While it doesn't look like there are any current cases of using
uninitialized data, let's zero all the UART data members to be
safe. Zero may not actually be better than a random number in
some cases, so all structure members should still be validated
before use, but at least zero is usually easier to debug than
some random stack garbage...

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt: Factor out common uart node code

Factor out the common code used by the fdt UART node parsers,
allowing us to drop duplicate code.

Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Fix fw_event_map initialization

fw_event_map represents array of firmware events. It should initialized
for maximum number of firmware events not counters.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Fix possible buffer overrun in counter validation

The active_events array is accessed with counter ID passed from the supervisor
software before the counter ID bound check. This may cause a buffer overrun
if a supervisor passes an invalid counter ID.

Fix this by moving the access part after the bound check.

Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Add the bound check for events during config match

Currently, there is no sanity check for firmware event code. We don't see
any issue as Linux kernel driver does a bound check on firmware events
already. However, OpenSBI can't assume sane supervisor mode software
always. Thus, an invalid event idx can cause a buffer overflow error.
For hardware events, the match will fail for invalid event code anyways.
However, a search is unecessary if event code is invalid.

Add a event ID validation function to solve the issue.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Fix counter index sanity check

The current implementation computes the possible counter range
by doing a left shift of counter base. However, this may overflow depending
on the counter base value. In case of overflow, the highest counter id
may be computed incorrectly. As per the SBI specification, the respective
function should return an error if any of the counter is not valid.

Fix the counter index check by avoiding left shifting while doing the
sanity checks. Without the shift, the implementation just iterates
over the counter mask and computes the correct counter index by adding
the base to it.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Fix sbi_snprintf

printc would happily write to 'out' even when 'out_len' was zero,
potentially overflowing buffers. Rework printc to not do that and
also ensure the null byte is written at the last position when
necessary, as stated in the snprintf man page. Also, panic if
sprintf or snprintf are called with NULL output strings (except
the special case of snprintf having a NULL output string and
a zero output size, allowing it to be used to get the number of
characters that would have been written). Finally, rename a
goto label which clashed with 'out'.

Fixes: 9e8ff05cb61f ("Initial commit.")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/serial: Update Shakti UART based on latest implementation

The age old version of Shakti UART was upgraded long back, but we missed
updating the driver in OpenSBI. The old version of UART is not supported
anymore, hence removed the inline comment which is also outdated now.

Signed-off-by: Prasanna T <ptprasanna@gmail.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>

lib: sbi_hart: Shorten the code to set MPV bit

MPV bit is set when the value of next_virt boolean variable equals
true. Since the value of next_virt is either 0 or 1, we can set
MPV bit without if-else logic.

Signed-off-by: Che-Chia Chang <alvinga@andestech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>