Takashi Sakamoto [Fri, 31 Mar 2017 13:06:05 +0000 (22:06 +0900)]
ALSA: fireface: add proc node to help debugging
Drivers can retrieve the state and configuration of clock by read
transactions.
This commit allows protocol abstraction layer to to dump the
information for debugging, via proc interface.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Fri, 31 Mar 2017 13:06:04 +0000 (22:06 +0900)]
ALSA: fireface: add support for MIDI functionality
In previous commit, fireface driver supports unique transaction mechanism
for MIDI feature. This commit adds MIDI functionality for userspace
applications.
As I wrote in a followed commit, user space applications get some
requirement from this driver. It should not touch a register to which
units transmit MIDI messages. It should configure a register in which
MIDI transmission is controlled.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Fri, 31 Mar 2017 13:06:03 +0000 (22:06 +0900)]
ALSA: fireface: add transaction support
As long as investigating Fireface 400, MIDI messages are transferred by
asynchronous communication over IEEE 1394 bus.
Fireface 400 receives MIDI messages by write transactions to two addresses;
0x'0000'0801'8000 and 0x'0000'0801'9000. Each of two seems to correspond to
MIDI port 1 and 2.
Fireface 400 transfers MIDI messages by write transactions to certain
addresses which configured by drivers. The drivers can decide upper 4 byte
of the addresses by write transactions to 0x'0000'0801'03f4. For the rest
part of the address, drivers can select from below options:
* 0x'0000'0000
* 0x'0000'0080
* 0x'0000'0100
* 0x'0000'0180
Selected options are represented in register 0x'0000'0801'051c as bit
flags. Due to this mechanism, drivers are restricted to use addresses on
'Memory space' of IEEE 1222, even if transactions to the address have
some side effects.
This commit adds transaction support for MIDI messaging, based on my
assumption that the similar mechanism is used on the other protocols. To
receive asynchronous transactions, the driver allocates a range of address
in 'Memory space'. I apply a strategy to use 0x'0000'0000 as lower 4 byte
of the address. When getting failure from Linux FireWire subsystem, this
driver retries to allocate addresses.
Unfortunately, read transaction to address 0x'0000'0801'051c returns zero
always, however write transactions have effects to the other features such
as status of sampling clock. For this reason, this commit delegates a task
to configure this register to user space applications. The applications
should set 3rd bit in LSB in little endian order.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Fri, 31 Mar 2017 13:06:02 +0000 (22:06 +0900)]
ALSA: fireface: add an abstraction layer for model-specific protocols
As of 2016, RME discontinued its Fireface series, thus it's OK for us
to focus on released firmwares to drive known units.
As long as investigating Fireface 400 with Windows driver and comparing
the result to FFADO implementation, I can see these firmwares have
different register assignments. On the other hand, according to manuals
of each models, features relevant to packet streaming seem to be common,
because GUIs for these models have the same options. It's reasonable to
assume an abstraction layer of protocols to communicate to each models.
This commit adds the abstraction layer for the protocols. This layer
includes some functions to operate common features of models in this
series.
In IEC 61883-1/6, the sequence of packet can transfer timing information
to synchronize receivers to transmitters. Units of each node on IEEE 1394
bus can generate transmitter's timing clock by handling value of SYT field
in CIP header with high-precision clock. For audio and music units on
IEEE 1394 bus, this recovered clock is designed to used for sampling clock
to capture/generate PCM frames on DSP/ADC/DAC. (Actually, in this world,
there's no units to implement this specification as is, as long as I
know).
Fireface series doesn't use this mechanism. Besides, It doesn't use
isochronous packet with CIP header. It uses internal crystal unit as its
initial sampling clock. When detecting input signals which can be
available for sampling clock (e.g. ADAT input), drivers can configure
units to use the signals as source of sampling clock. When something goes
wrong, e.g. frequency mismatching between the signal and configured value,
units fallback to the other detected signals alternatively. When detecting
no alternatives, internal crystal unit is used as source of sampling
clock. On manual of Fireface 400, this mechanism is described as
'Autosync'.
On the units, packet streaming is controlled by write transactions to
certain registers. Format of the packet, e.g. the number of data channels
in a data block, is also configured by the same manner. For this purpose,
.begin_session and .finish_session is added.
The remarkable point of this protocol is to allow drivers to configure
arbitrary sampling transmission frequency; e.g. 12.345 Hz. As long as I
know, there's no actual DAC/ADC chips which support this kind of
capability. I think a pair of packet streaming layer and data block
processing layer is isolated from sampling data processing layer in a
point of governed clock. In short, between these parts, resampling layer
exists. Actually, for Fireface 400, write transactions to
0x'0000'8010'051c has an effect to change sampling clock frequency with
base frequencies (32.0/44.1/48.0 kHz) and its multipliers (x2/x4),
regardless of sampling transmission frequency.
For this reason, the abstraction layer doesn't handle parameters for
sampling clock. Instead, each implementation of .begin_session is
expected to configure sampling transmission frequency.
For packet streaming layer, it's enough to get current selection of
source signals for the sampling clock and its frequency. In the
abstraction layer, when internal crystal is selected, drivers can sets
arbitrary sampling frequency, else they should follow configured
frequency. For this purpose, .get_clock is added.
Drivers are allows to bank up data fetching from a pair of packet
streaming/data block processing layer and sampling data processing layer.
This feature seems to suppress noises at starting/stopping packet
streaming. For this purpose, .switch_fetching_mode is added.
As I described in the above, units have remarkable mechanism to manage
sampling clock and process sampling data. For debugging purpose,
.dump_sync_status and .dump_clock_config are added. I don't have a need
to common interface to represent the status and configuration,
developers can add actual implementation of the abstraction layer as they
like.
Unlike PCM frames, MIDI messages are transferred by asynchronous
communication over IEEE 1394 bus, thus target addresses are important for
this feature. The .midi_high_addr_reg, .midi_rx_port_0_reg and
.midi_rx_port_1_reg are for this purpose. I'll describe them in following
commit.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Fri, 31 Mar 2017 13:06:01 +0000 (22:06 +0900)]
ALSA: fireface: add model specific structure
RME Fireface series has several models and their specifications are
different. Currently, we find no way to retrieve the specifications
from actual devices and need to implement them in this driver.
This commit adds a structure to describe model specific data. This
structure has an identical name for each unit, and maximum number of
data channels in each mode. I'll describe about the mode in following
commits.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Fri, 31 Mar 2017 13:06:00 +0000 (22:06 +0900)]
ALSA: fireface: postpone sound card registration
Just after appearing on IEEE 1394 bus, this unit generates several bus
resets. This is due to loading firmware from on-board flash memory and
initialize hardware. It's better to postpone sound card registration.
This commit schedules workqueue to process actual probe processing
2 seconds after the last bus-reset. The card instance is kept at unit
probe callback and released at card free callback. Therefore, when the
actual probe processing fails, the memory block is wasted. This is due to
simplify driver implementation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Fri, 31 Mar 2017 13:05:59 +0000 (22:05 +0900)]
ALSA: fireface: add skeleton for RME Fireface series
This commit adds a new driver for RME Fireface series. This commit just
creates/removes card instance according to IEEE 1394 bus event. More
functions will be added in following commits.
Three types of firmware have released by RME GmbH; for Fireface 400, for
Fireface 800 and for UCX/802/UFX. It's reasonable that these models use
different protocol for communication. Currently, I've investigated
Fireface 400 and nothing others.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 29 Mar 2017 06:46:00 +0000 (08:46 +0200)]
ALSA: hda - Improved position reporting on SKL+
Apply the same methods to obtain the current stream position as ASoC
Intel SKL driver uses. It reads the position from DPIB for a playback
stream while it still reads from the position buffer for a capture
stream. For a capture stream, some ugly workaround is needed to
settle down the inconsistent position.
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 29 Mar 2017 06:39:19 +0000 (08:39 +0200)]
ALSA: hda - Move SKL+ vendor specific register definitions to hda_register.h
They may be used by both legacy and ASoC drivers.
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 29 Mar 2017 06:27:15 +0000 (08:27 +0200)]
ALSA: hda - Avoid tricky macros
The macros _snd_hdac_chip_read() and *_write() expand to different
types (b,w,l) per their argument. They were thought to be used only
internally for other snd_hdac_chip_*() macros, but in some situations
we need to call these directly, and they are way too ugly.
Instead of saving a few lines, we just write these macros explicitly
with the types, so that they can be used in a saner way.
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Matthias Kaehlcke [Sat, 1 Apr 2017 01:00:04 +0000 (18:00 -0700)]
ALSA: hda/ca0132: Limit values for chip addresses to 32-bit
With the previous unsigned long value clang generates warnings like
this:
sound/pci/hda/patch_ca0132.c:860:37: error: implicit conversion from
'unsigned long' to 'u32' (aka 'unsigned int') changes value from
18446744073709551615 to
4294967295 [-Werror,-Wconstant-conversion]
spec->curr_chip_addx = (res < 0) ? ~0UL : chip_addx;
~ ^~~~
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dan Carpenter [Fri, 31 Mar 2017 15:22:23 +0000 (18:22 +0300)]
ALSA: timer: Info leak in snd_timer_user_tinterrupt()
The "r1" struct has memory holes. We clear it with memset on one path
where it is used but not the other. Let's just memset it at the start
of the function so it's always safe.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dan Carpenter [Fri, 31 Mar 2017 15:21:41 +0000 (18:21 +0300)]
ALSA: timer: remove some dead code
We just checked "id.card < 0" on the lines before so we know it's not
true here. We can delete that check.
Also checkpatch.pl complains about some extra curly braces so we may as
well fix that while we're at it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dan Carpenter [Fri, 31 Mar 2017 13:53:40 +0000 (16:53 +0300)]
ALSA: emux: stop if copy_from_user() fails
If we can't fill the "patch" struct because "count" is too small (it can
be as low as 4 bytes) or because copy_from_user() failed, then just
return instead of using unintialized data.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 31 Mar 2017 09:19:19 +0000 (11:19 +0200)]
ALSA: usb-audio: Fake also USB device id when alias is given
Recently snd-usb-audio driver received a new option, quirk_alias, to
allow user to apply the existing quirk for a different device. This
works for many quirks as is, but some still need more tune-ups:
namely, some quirks check the USB vendor/device IDs in various places,
thus it doesn't work as long as the ID is different from the expected
one.
With this patch, the driver stores the aliased USB ID, so that these
rest quirks per device ID are applied. The transition to use the
cached USB ID was already done in the past, so what we needed now is
only to overwrite chip->usb_id.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clemens Ladisch [Wed, 29 Mar 2017 18:55:50 +0000 (20:55 +0200)]
ALSA: oxygen: simply setting of the shortname for Xonar DG cards
We don't need to manually set the card name; with an entry in the
names[] array, this happens automatically.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:28 +0000 (21:30 +0900)]
ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3
MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire
series, produced in 2008/2014. This model consists of three chips for
functionality on IEEE 1394 bus:
* TI TSB41AB2 (Physical layer for IEEE 1394 bus)
* Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet
processing and data block processing layer)
* TI TMS320C6722 (Digital signal processing)
This commit adds a support for this model, with its unique protocol as
version 3. This protocol has some additional features to protocol
version 2.
* Support several optical interfaces.
* Support a data chunk for return of reverb effect.
* Have a quirk of tx packets.
* Support heartbeat asynchronous transaction.
In this protocol, series of transferred packets has some quirks. Below
fields in CIP headers of the packets are out of IEC 61883-1:
- SID (source node id): always 0x0d
- DBS (data block size): always 0x04
- DBC (data block counter): always 0x00
- EOH (End of header): always 0x00
Below is an actual sample of transferred packets.
quads CIP1 CIP2
520 0x0D040400 0x22FFFFFF
8 0x0D040400 0x22FFFFFF
520 0x0D040400 0x22FFFFFF
520 0x0D040400 0x22FFFFFF
8 0x0D040400 0x22FFFFFF
Status of clock is configured by write transactions to 0x'ffff'f000'0b14,
as well as version 2, while meanings of fields are different from the
former protocols. Modes of optical interfaces are configured by write
transactions to 0x'ffff'f000'0c94.
Drivers can register its address to receive heatbeat transactions from the
unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is
for the lower part. Nevertheless, this feature is not useless for this
driver and this commit omits it.
Each data block consists of two parts in a point of the number of included
data chunks. In both of 'fixed' and 'differed' parts, the number of
included data blocks are a multiple of 4, thus depending on models there's
some empty data chunks. For example, 828mk3 includes one pair of empty
data chunks in its fixed part. When optical interface is configured to
S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part.
To reduce consumption of CPU cycles with additional conditions/loops, this
commit just exposes these empty chunks to user space as PCM channels.
Additionally, 828mk3 has a non-negligible overhead to change its sampling
transfer frequency. When softwares send asynchronous transaction to
perform it, LED on the unit starts to blink. In a worst case, it continues
blink during several seconds; e.g. 10 seconds. When stopping blinking,
the unit seems to be prepared for the requested sampling transfer
frequency. To wait for the preparation, this commit forces the driver
to call task scheduler and applications sleeps for 4 seconds.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:27 +0000 (21:30 +0900)]
ALSA: firewire-lib: add a quirk of packet without valid EOH in CIP format
In IEC 61883-1, when two quadlets CIP header is used, the most significant
bit in second CIP header stands. However, packets from units with MOTU
protocol version 3 have a quirk without this flag. Current packet streaming
layer handles this as protocol error.
This commit adds a new enumeration constant for this quirk, to handle MOTU
protocol version 3.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:26 +0000 (21:30 +0900)]
ALSA: firewire-motu: add support for MOTU 828mk2 as a model with protocol version 2
MOTU 828mk2 is one of second generation in MOTU FireWire series, produced in
2003. This model consists of four chips:
* TI TSB41AB2 (Physical layer for IEEE 1394 bus)
* PDI 1394L40BE (Link layer for IEEE 1394 bus and packet processing layer)
* ALTERA ACEX 1K EP1K30 Series FPGA (Data block processing layer)
* TI TMS320VC5402 (Digital signal processing)
This commit adds a support for this model, with its unique protocol as
version 2. The features of this protocol are:
* Support data chunks for status and control messages for both
directions.
* Support a pair of MIDI input/output.
* Support a data chunk for mic/instrument independent of analog line in.
* Support a data chunk for playback return.
* Support independent data chunks for S/PDIF of both optical/coaxial
interfaces.
* Support independent data chunks for each of main out and phone out.
Status of clock is configured by write transactions to 0x'ffff'f000'0b14.
Modes of optical interfaces are configured by write transactions to
0x'ffff'f000'0c04.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:25 +0000 (21:30 +0900)]
ALSA: firewire-motu: enable to read transaction cache via hwdep interface
MOTU FireWire series can transfer messages to registered address. These
messages are transferred for the status of internal clock synchronization
just after starting streams.
When the synchronization is stable, it's 0x01ffffff. Else, it's 0x05ffffff.
This commit adds a functionality for user space applications to receive
content of the message.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:24 +0000 (21:30 +0900)]
ALSA: firewire-motu: add hwdep interface
This commit adds hwdep interface so as the other sound drivers for units
on IEEE 1394 bus have.
This interface is designed for mixer/control applications. By using this
interface, an application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:23 +0000 (21:30 +0900)]
ALSA: firewire-motu: add MIDI functionality
In MOTU FireWire series, MIDI messages are multiplexed to isochronous
packets as well as PCM frames, while the way is different from the one
in IEC 61883-6.
MIDI messages are put into a certain position in message chunks. One data
block can includes one byte of the MIDI messages. When data block includes
a MIDI byte, the block has a flag in a certain position of the message
chunk. These positions are unique depending on protocols.
Once a data block includes a MIDI byte, some following data blocks includes
no MIDI bytes. Next MIDI byte appears on a data block corresponding to
next cycle of physical MIDI bus. This seems to avoid buffer overflow caused
by bandwidth differences between IEEE 1394 bus and physical MIDI bus.
This commit adds MIDI functionality to transfer/receive MIDI messages.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:22 +0000 (21:30 +0900)]
ALSA: firewire-motu: add PCM functionality
This commit adds PCM functionality to transmit/receive PCM samples.
When one of PCM substreams are running or external clock source is
selected, current sampling rate is used. Else, the sampling rate is
changed according to requests from a userspace application.
Available number of samples in a frame of PCM substream is determined at
open(2) to corresponding PCM character device. Later, packet streaming
starts by ioctl(2) with SNDRV_PCM_IOCTL_PREPARE. In theory, between them,
applications can change state of the unit by any write transaction to
change the number. In this case, this driver may fail packet streaming due
to wrong data format.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:21 +0000 (21:30 +0900)]
ALSA: firewire-motu: add proc node to show current statuc of clock and packet formats
This commit adds a proc node for debugging purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:20 +0000 (21:30 +0900)]
ALSA: firewire-motu: add stream management functionality
This commit adds a functionality to manage packet streaming for MOTU
FireWire series.
The streaming is not controlled by CMP, thus against IEC 61883-1. Write
transaction to certain addresses start/stop packet streaming.
Transactions to 0x'ffff'f000'0b00 results in isochronous channel number for
both directions and starting/stopping transmission of packets. The
isochronous channel number is represented in 6 bit field, thus units can
identify the channels up to 64, as IEEE 1394 bus specification described.
Transactions to 0x'ffff'f000'0b10 results in packet format for both
directions and transmission speed. When each of data block includes fixed
part of data chunks only, corresponding flags stand.
When bus reset occurs, the units continue to transmit packets with
non-contiguous data block counter. This causes discontinuity detection in
packet streaming engine and ALSA PCM applications receives EPIPE from any
I/O operation. In this case, typical applications manage to recover
corresponding PCM substream. This behaviour is kicked much earlier than
callback of bus reset handler by Linux FireWire subsystem, therefore
status of packet streaming is not changed in the handler.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:19 +0000 (21:30 +0900)]
ALSA: firewire-motu: handle transactions specific for MOTU FireWire models
All models of MOTU FireWire series can be controlled by write transaction
to addresses in a range from 0x'ffff'f0000'0b00 to 0x'ffff'f000'0cff.
The models support asynchronous notification. This notification has 32 bit
field data, and is transferred when status of clock changes. Meaning of
the value is not enough clear yet.
Drivers can register its address to receive the notification. Write
transaction to 0x'ffff'f000'0b04 registers higher 16 bits of the address.
Write transaction to 0x'ffff'f0000'0b08 registers the rest of bits. The
address includes node ID, thus it should be registered every time of bus
reset.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:18 +0000 (21:30 +0900)]
ALSA: firewire-motu: add MOTU specific protocol layer
MOTU FireWire series uses blocking transmission for AMDTP packet streaming.
They transmit/receive 8,000 packets per second, to handle the same number
of data blocks as current sampling transmission frequency. Thus,
IEC 61883-1/6 packet streaming engine of ALSA firewire stack is available
for them.
However, the sequence of packet and data blocks includes some quirks.
Below sample is a sequence of CIP headers of packets received by 828mk2,
at 44.1kHz of sampling transmission frequency.
quads CIP1 CIP2
488 0x020F04E8 0x8222FFFF
8 0x020F04F8 0x8222FFFF
488 0x020F0400 0x8222FFFF
488 0x020F0408 0x8222FFFF
8 0x020F04E8 0x8222FFFF
488 0x020F04F0 0x8222FFFF
488 0x020F04F8 0x8222FFFF
The SID (source node ID), DBS (data block size), SPH (source packet header),
FMT (format ID), FDF (format dependent field) and SYT (time stamp) fields
are in IEC 61883-1. Especially, FMT is 0x02, FDF is 0x22 and SYT is 0xffff
to define MOTU specific protocol. In an aspect of dbc field, the value
represents accumulated number of data blocks included the packet. This
is against IEC 61883-1, because according to the specification this value
should be the number of data blocks already transferred.
In ALSA IEC 61883-1/6 engine, this quirk is already supported by
CIP_DBC_IS_END_EVENT flag, because Echo Audio Fireworks has.
Each data block includes SPH as its first quadlet field, to represent its
presentation time stamp. Actual value of SPH is compliant to IEC 61883-1;
lower 25 bits of 32 bits width consists of 13 bits cycle count and 12 bits
cycle offset.
The rest of each data block consists of 24 bit chunks. All of PCM samples,
MIDI messages, status and control messages are transferred by the chunks.
This is similar to '24-bit * 4 Audio Pack' in IEC 61883-6. The position of
each kind of data depends on generations of each model. The number of
whole chunks in a data block is a multiple of 4, to consists of
quadlet-aligned packets.
This commit adds data block processing layer specific for the MOTU
protocol. The remarkable point is the way to generate SPH header. Time
stamps for each data blocks are generated by below calculation:
* Using pre-computed table for the number of ticks per event
* 44,1kHz: (557 + 123/441)
* 48.0kHz: (512 + 0/441)
* 88.2kHz: (278 + 282/441)
* 96.0kHz: (256 + 0/441)
* 176.4kHz: (139 + 141/441)
* 192.0kHz: (128 + 0/441)
* Accumulate the ticks and set the value to SPH for every events.
* This way makes sense only for blocking transmission because this mode
transfers fixed number or none of events.
This calculation assumes that each data block has a PCM frame which is
sampled according to event timing clock. Current packet streaming layer
has the same assumption.
Although this sequence works fine for MOTU FireWire series at sampling
transmission frequency based on 48.0kHz, it is not enough at the frequency
based on 44.1kHz. The units generate choppy noise every few seconds.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:17 +0000 (21:30 +0900)]
ALSA: firewire-lib: enable CIP_DBC_IS_END_EVENT for both directions of stream
Commit
c8bdf49b9935("ALSA: fireworks/firewire-lib: Add a quirk for the
meaning of dbc") adds CIP_DBC_IS_END_EVENT flag just for tx packets.
However, MOTU FireWire series has this quirk for rx packets.
This commit allows both directions with the flag.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:16 +0000 (21:30 +0900)]
ALSA: firewire-lib: add support for source packet header field in CIP header
In IEC 61883-1, CIP headers can have a SPH field. When a packet has 1 in
SPH field of its CIP header, the packet has a source packet headers. A
source packet header consists of 32 bit field (= 1 quadlet) and it
transfers time stamp, which is the same value as the lower 25 bits of the
IEEE 1394 CYCLE_TIMER register and the rest is zero.
This commit just supports source packet header field because IEC 61883-1
includes ambiguity the position of this header and its count. Each
protocol layer is allowed to have actual implementation according its
requirements.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:15 +0000 (21:30 +0900)]
ALSA: firewire-lib: record cycle count for the first packet
Currently, packet streaming layer passes generated SYT value to data block
processing layer. However, this is not enough in a case that the data block
processing layer generates time stamps by its own ways.
For out-packet stream, the packet streaming layer guarantees 8,000 times
calls of data block processing layers per sec. Therefore, when cycle count
of the first packet is recorded, data block processing layers can calculate
own time stamps with the recorded value.
For the reason, this commit allows packet streaming layer to record the
first cycle count. Each data block processing layer can read the count by
accessing a member of structure for packet streaming layer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:14 +0000 (21:30 +0900)]
ALSA: firewire-motu: add an abstraction layer for three types of protocols
In an aspect of used protocols to communicate, models of MOTU FireWire
units are categorized to three generations.
This commit adds an abstraction layer of the protocols for features
related to packet streaming functionality. This layer includes 5
operations.
When configuring packet streaming functionality with sampling rate and
sampling transmission frequency, .get_clock_rate and .set_clock_rate are
called with proper arguments. MOTU FireWire series supports up to 192.0kHz.
When checking current source of sampling clock (not clock for packetization
layer), .get_clock_source is used. Enumeration is added to represent the
sources supported by this series. This operation can be used to expose
available sampling rate to user space applications when the unit is
configured to use any input signal as source of clock instead of crystal
clock.
In the protocols, the path between packet processing layer and digital
signal processing layer can be controlled. This looks a functionality to
'mute' the unit. For this feature, .switch_fetching_mode is added. This
can be used to suppress noises every time packet streaming starts/stops.
In a point of the size of data blocks at a certain sampling transmission
frequency, the most units accept several modes. This is due to usage of
optical interfaces. The size differs depending on which modes are
configured to the interfaces; None, S/PDIF and ADAT. Additionally, format
of packet is different depending on protocols. To cache current size of
data blocks and its format, .cache_packet_formats is added. This is used
by PCM functionality, packet streaming functionality and data block
processing layer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:13 +0000 (21:30 +0900)]
ALSA: firewire-motu: add a structure for model-dependent parameters.
MOTU FireWire series doesn't tell drivers their capabilities, thus
the drivers should have and apply model-dependent parameters to detected
models.
This commit adds a structure to represent such parameters. Capabilities
are represented by enumeration except for the number of analog line
in/out. Identification name also be in the structure because the units has
no registers for this purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:12 +0000 (21:30 +0900)]
ALSA: firewire-motu: postpone sound card registration
Just after appearing on IEEE 1394 bus, this unit generates several bus
resets. This is due to loading firmware from on-board flash memory and
initialize hardware. It's better to postpone sound card registration.
This commit applies this idea.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Wed, 22 Mar 2017 12:30:11 +0000 (21:30 +0900)]
ALSA: firewire-motu: add skeleton for Mark of the unicorn (MOTU) FireWire series
This commit adds an new driver for MOTU FireWire series. In this commit,
this driver just creates/removes card instance according to bus event.
More functionalities will be added in following commits.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Arnd Bergmann [Thu, 23 Mar 2017 15:15:55 +0000 (16:15 +0100)]
ALSA: au88x0: avoid theoretical uninitialized access
The latest gcc-7.0.1 snapshot points out that we if nr_ch is zero, we never
initialize some variables:
sound/pci/au88x0/au88x0_core.c: In function 'vortex_adb_allocroute':
sound/pci/au88x0/au88x0_core.c:2304:68: error: 'mix[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
sound/pci/au88x0/au88x0_core.c:2305:58: error: 'src[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I assume this can never happen in practice, but adding a check here doesn't
hurt either and avoids the warning. The code has been unchanged since
the start of git history.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Matthias Kaehlcke [Wed, 15 Mar 2017 22:41:23 +0000 (15:41 -0700)]
ALSA: hda/ca0132: Remove double parentheses
The extra pairs of parantheses are not needed and causes clang to
generate warnings like this:
sound/pci/hda/patch_ca0132.c:1171:14: error: equality comparison with extraneous parentheses [-Werror,-Wparentheses-equality]
if ((buffer == NULL))
~~~~~~~^~~~~~~
sound/pci/hda/patch_ca0132.c:1171:14: note: remove extraneous parentheses around the comparison to silence this warning
if ((buffer == NULL))
~ ^ ~
sound/pci/hda/patch_ca0132.c:1171:14: note: use '=' to turn this equality comparison into an assignment
if ((buffer == NULL))
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Nicolas Iooss [Mon, 13 Mar 2017 19:22:50 +0000 (20:22 +0100)]
ALSA: es1688: Use strcpy() instead of sprintf()
There is no point in using sprintf() without a format string when
strcpy() can perform the same operation.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 20 Mar 2017 11:24:26 +0000 (12:24 +0100)]
Merge branch 'topic/for-4.12' into for-next
Jaroslav Kysela [Thu, 9 Mar 2017 12:30:09 +0000 (13:30 +0100)]
ALSA: hda - add support for docking station for HP 840 G3
This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 840 G3.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jaroslav Kysela [Thu, 9 Mar 2017 12:29:13 +0000 (13:29 +0100)]
ALSA: hda - add support for docking station for HP 820 G2
This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 820 G2.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 20 Mar 2017 09:08:19 +0000 (10:08 +0100)]
ALSA: ctxfi: Fix the incorrect check of dma_set_mask() call
In the commit [
15c75b09f8d1: ALSA: ctxfi: Fallback DMA mask to 32bit],
I forgot to put "!" at dam_set_mask() call check in cthw20k1.c (while
cthw20k2.c is OK). This patch fixes that obvious bug.
(As a side note: although the original commit was completely wrong,
it's still working for most of machines, as it sets to 32bit DMA mask
in the end. So the bug severity is low.)
Fixes:
15c75b09f8d1 ("ALSA: ctxfi: Fallback DMA mask to 32bit")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Mon, 20 Mar 2017 02:09:39 +0000 (19:09 -0700)]
Linux 4.11-rc3
Linus Torvalds [Mon, 20 Mar 2017 02:00:47 +0000 (19:00 -0700)]
mm/swap: don't BUG_ON() due to uninitialized swap slot cache
This BUG_ON() triggered for me once at shutdown, and I don't see a
reason for the check. The code correctly checks whether the swap slot
cache is usable or not, so an uninitialized swap slot cache is not
actually problematic afaik.
I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
I'm not sure why that seemingly pointless check was there. I suspect
the real fix is to just remove it entirely, but for now we'll warn about
it but not bring the machine down.
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 20 Mar 2017 01:49:28 +0000 (18:49 -0700)]
Merge tag 'powerpc-4.11-5' of git://git./linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
"A couple of minor powerpc fixes for 4.11:
- wire up statx() syscall
- don't print a warning on memory hotplug when HPT resizing isn't
available
Thanks to: David Gibson, Chandan Rajendra"
* tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Don't give a warning when HPT resizing isn't available
powerpc: Wire up statx() syscall
Linus Torvalds [Mon, 20 Mar 2017 01:11:13 +0000 (18:11 -0700)]
Merge branch 'parisc-4.11-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
modules with CONFIG_MODVERSIONS.
- Dave Anglin optimized the cache flushing for vmap ranges.
- Arvind Yadav provided a fix for a potential NULL pointer dereference
in the parisc perf code (and some code cleanups).
- I wired up the new statx system call, fixed some compiler warnings
with the access_ok() macro and fixed shutdown code to really halt a
system at shutdown instead of crashing & rebooting.
* 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix system shutdown halt
parisc: perf: Fix potential NULL pointer dereference
parisc: Avoid compiler warnings with access_ok()
parisc: Wire up statx system call
parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
parisc: support R_PARISC_SECREL32 relocation in modules
Linus Torvalds [Mon, 20 Mar 2017 01:06:31 +0000 (18:06 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"The bulk of the changes are in qla2xxx target driver code to address
various issues found during Cavium/QLogic's internal testing (stable
CC's included), along with a few other stability and smaller
miscellaneous improvements.
There are also a couple of different patch sets from Mike Christie,
which have been a result of his work to use target-core ALUA logic
together with tcm-user backend driver.
Finally, a patch to address some long standing issues with
pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
which will make folks using physical (or virtual) magnetic tape happy"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
qla2xxx: Update driver version to 9.00.00.00-k
qla2xxx: Fix delayed response to command for loop mode/direct connect.
qla2xxx: Change scsi host lookup method.
qla2xxx: Add DebugFS node to display Port Database
qla2xxx: Use IOCB interface to submit non-critical MBX.
qla2xxx: Add async new target notification
qla2xxx: Export DIF stats via debugfs
qla2xxx: Improve T10-DIF/PI handling in driver.
qla2xxx: Allow relogin to proceed if remote login did not finish
qla2xxx: Fix sess_lock & hardware_lock lock order problem.
qla2xxx: Fix inadequate lock protection for ABTS.
qla2xxx: Fix request queue corruption.
qla2xxx: Fix memory leak for abts processing
qla2xxx: Allow vref count to timeout on vport delete.
tcmu: Convert cmd_time_out into backend device attribute
tcmu: make cmd timeout configurable
tcmu: add helper to check if dev was configured
target: fix race during implicit transition work flushes
target: allow userspace to set state to transitioning
target: fix ALUA transition timeout handling
...
Linus Torvalds [Sun, 19 Mar 2017 22:45:02 +0000 (15:45 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull device-dax fixes from Dan Williams:
"The device-dax driver was not being careful to handle falling back to
smaller fault-granularity sizes.
The driver already fails fault attempts that are smaller than the
device's alignment, but it also needs to handle the cases where a
larger page mapping could be established. For simplicity of the
immediate fix the implementation just signals VM_FAULT_FALLBACK until
fault-size == device-alignment.
One fix is for -stable to address pmd-to-pte fallback from the
original implementation, another fix is for the new (introduced in
4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the
ride.
These have received a build success notification from the kbuild
robot"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: fix debug output typo
device-dax: fix pud fault fallback handling
device-dax: fix pmd/pte fault fallback handling
Himanshu Madhani [Wed, 15 Mar 2017 16:48:56 +0000 (09:48 -0700)]
qla2xxx: Update driver version to 9.00.00.00-k
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:55 +0000 (09:48 -0700)]
qla2xxx: Fix delayed response to command for loop mode/direct connect.
Current driver wait for FW to be in the ready state before
processing in-coming commands. For Arbitrated Loop or
Point-to- Point (not switch), FW Ready state can take a while.
FW will transition to ready state after all Nports have been
logged in. In the mean time, certain initiators have completed
the login and starts IO. Driver needs to start processing all
queues if FW is already started.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:54 +0000 (09:48 -0700)]
qla2xxx: Change scsi host lookup method.
For target mode, when new scsi command arrive, driver first performs
a look up of the SCSI Host. The current look up method is based on
the ALPA portion of the NPort ID. For Cisco switch, the ALPA can
not be used as the index. Instead, the new search method is based
on the full value of the Nport_ID via btree lib.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Himanshu Madhani [Wed, 15 Mar 2017 16:48:53 +0000 (09:48 -0700)]
qla2xxx: Add DebugFS node to display Port Database
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:52 +0000 (09:48 -0700)]
qla2xxx: Use IOCB interface to submit non-critical MBX.
The Mailbox interface is currently over subscribed. We like
to reserve the Mailbox interface for the chip managment and
link initialization. Any non essential Mailbox command will
be routed through the IOCB interface. The IOCB interface is
able to absorb more commands.
Following commands are being routed through IOCB interface
- Get ID List (007Ch)
- Get Port DB (0064h)
- Get Link Priv Stats (006Dh)
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:51 +0000 (09:48 -0700)]
qla2xxx: Add async new target notification
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Anil Gurumurthy [Wed, 15 Mar 2017 16:48:50 +0000 (09:48 -0700)]
qla2xxx: Export DIF stats via debugfs
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:49 +0000 (09:48 -0700)]
qla2xxx: Improve T10-DIF/PI handling in driver.
Add routines to support T10 DIF tag.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:48 +0000 (09:48 -0700)]
qla2xxx: Allow relogin to proceed if remote login did not finish
If the remote port have started the login process, then the
PLOGI and PRLI should be back to back. Driver will allow
the remote port to complete the process. For the case where
the remote port decide to back off from sending PRLI, this
local port sets an expiration timer for the PRLI. Once the
expiration time passes, the relogin retry logic is allowed
to go through and perform login with the remote port.
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:47 +0000 (09:48 -0700)]
qla2xxx: Fix sess_lock & hardware_lock lock order problem.
The main lock that needs to be held for CMD or TMR submission
to upper layer is the sess_lock. The sess_lock is used to
serialize cmd submission and session deletion. The addition
of hardware_lock being held is not necessary. This patch removes
hardware_lock dependency from CMD/TMR submission.
Use hardware_lock only for error response in this case.
Path1
CPU0 CPU1
---- ----
lock(&(&ha->tgt.sess_lock)->rlock);
lock(&(&ha->hardware_lock)->rlock);
lock(&(&ha->tgt.sess_lock)->rlock);
lock(&(&ha->hardware_lock)->rlock);
Path2/deadlock
*** DEADLOCK ***
Call Trace:
dump_stack+0x85/0xc2
print_circular_bug+0x1e3/0x250
__lock_acquire+0x1425/0x1620
lock_acquire+0xbf/0x210
_raw_spin_lock_irqsave+0x53/0x70
qlt_sess_work_fn+0x21d/0x480 [qla2xxx]
process_one_work+0x1f4/0x6e0
Cc: <stable@vger.kernel.org>
Cc: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:46 +0000 (09:48 -0700)]
qla2xxx: Fix inadequate lock protection for ABTS.
Normally, ABTS is sent to Target Core as Task MGMT command.
In the case of error, qla2xxx needs to send response, hardware_lock
is required to prevent request queue corruption.
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:45 +0000 (09:48 -0700)]
qla2xxx: Fix request queue corruption.
When FW notify driver or driver detects low FW resource,
driver tries to send out Busy SCSI Status to tell Initiator
side to back off. During the send process, the lock was not held.
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:44 +0000 (09:48 -0700)]
qla2xxx: Fix memory leak for abts processing
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Joe Carnuccio [Wed, 15 Mar 2017 16:48:43 +0000 (09:48 -0700)]
qla2xxx: Allow vref count to timeout on vport delete.
Cc: <stable@vger.kernel.org>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Sat, 18 Mar 2017 22:04:13 +0000 (15:04 -0700)]
tcmu: Convert cmd_time_out into backend device attribute
Instead of putting cmd_time_out under ../target/core/user_0/foo/control,
which has historically been used by parameters needed for initial
backend device configuration, go ahead and move cmd_time_out into
a backend device attribute.
In order to do this, tcmu_module_init() has been updated to create
a local struct configfs_attribute **tcmu_attrs, that is based upon
the existing passthrough_attrib_attrs along with the new cmd_time_out
attribute. Once **tcm_attrs has been setup, go ahead and point
it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core.
Also following MNC's previous change, ->cmd_time_out is stored in
milliseconds but exposed via configfs in seconds. Also, note this
patch restricts the modification of ->cmd_time_out to before +
after the TCMU device has been configured, but not while it has
active fabric exports.
Cc: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 9 Mar 2017 08:42:09 +0000 (02:42 -0600)]
tcmu: make cmd timeout configurable
A single daemon could implement multiple types of devices
using multuple types of real devices that may not support
restarting from crashes and/or handling tcmu timeouts. This
makes the cmd timeout configurable, so handlers that do not
support it can turn if off for now.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 9 Mar 2017 08:42:08 +0000 (02:42 -0600)]
tcmu: add helper to check if dev was configured
This adds a helper to check if the dev was configured. It
will be used in the next patch to prevent updates to some
config settings after the device has been setup.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Linus Torvalds [Sat, 18 Mar 2017 22:50:39 +0000 (15:50 -0700)]
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Pull OpenRISC fixes from Stafford Horne:
"OpenRISC fixes for build issues that were exposed by kbuild robots
after 4.11 merge. All from allmodconfig builds. This includes:
- bug in the handling of 8-byte get_user() calls
- module build failure due to multile missing symbol exports"
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
openrisc: Export symbols needed by modules
openrisc: fix issue handling 8 byte get_user calls
openrisc: xchg: fix `computed is not used` warning
Mike Christie [Thu, 2 Mar 2017 10:59:50 +0000 (04:59 -0600)]
target: fix race during implicit transition work flushes
This fixes the following races:
1. core_alua_do_transition_tg_pt could have read
tg_pt_gp_alua_access_state and gone into this if chunk:
if (!explicit &&
atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
ALUA_ACCESS_STATE_TRANSITION) {
and then core_alua_do_transition_tg_pt_work could update the
state. core_alua_do_transition_tg_pt would then only set
tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would
not get updated with the second calls state.
2. core_alua_do_transition_tg_pt could be setting
tg_pt_gp_transition_complete while the tg_pt_gp_transition_work
is already completing. core_alua_do_transition_tg_pt then waits on the
completion that will never be called.
To handle these issues, we just call flush_work which will return when
core_alua_do_transition_tg_pt_work has completed so there is no need
to do the complete/wait. And, if core_alua_do_transition_tg_pt_work
was running, instead of trying to sneak in the state change, we just
schedule up another core_alua_do_transition_tg_pt_work call.
Note that this does not handle a possible race where there are multiple
threads call core_alua_do_transition_tg_pt at the same time. I think
we need a mutex in target_tg_pt_gp_alua_access_state_store.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 10:59:49 +0000 (04:59 -0600)]
target: allow userspace to set state to transitioning
Userspace target_core_user handlers like tcmu-runner may want to set the
ALUA state to transitioning while it does implicit transitions. This
patch allows that state when set from configfs.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 10:59:48 +0000 (04:59 -0600)]
target: fix ALUA transition timeout handling
The implicit transition time tells initiators the min time
to wait before timing out a transition. We currently schedule
the transition to occur in tg_pt_gp_implicit_trans_secs
seconds so there is no room for delays. If
core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata
needs to write out info to a remote file, then the initiator can
easily time out the operation.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 05:13:26 +0000 (23:13 -0600)]
target: Use system workqueue for ALUA transitions
If tcmu-runner is processing a STPG and needs to change the kernel's
ALUA state then we cannot use the same work queue for task management
requests and ALUA transitions, because we could deadlock. The problem
occurs when a STPG times out before tcmu-runner is able to
call into target_tg_pt_gp_alua_access_state_store->
core_alua_do_port_transition -> core_alua_do_transition_tg_pt ->
queue_work. In this case, the tmr is on the work queue waiting for
the STPG to complete, but the STPG transition is now queued behind
the waiting tmr.
Note:
This bug will also be fixed by this patch:
http://www.spinics.net/lists/target-devel/msg14560.html
which switches the tmr code to use the system workqueues.
For both, I am not sure if we need a dedicated workqueue since
it is not a performance path and I do not think we need WQ_MEM_RECLAIM
to make forward progress to free up memory like the block layer does.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 05:13:25 +0000 (23:13 -0600)]
target: fail ALUA transitions for pscsi
We do not setup the LU group for pscsi devices, so if you write
a state to alua_access_state that will cause a transition you will
get a NULL pointer dereference.
This patch will fail attempts to try and transition the path
for backend devices that set the TRANSPORT_FLAG_PASSTHROUGH_ALUA
flag.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 05:13:24 +0000 (23:13 -0600)]
target: allow ALUA setup for some passthrough backends
This patch allows passthrough backends to use the core/base LIO
ALUA setup and state checks, but still handle the execution of
commands.
This will allow the target_core_user module to execute STPG and RTPG
in userspace, and not have to duplicate the ALUA state checks, path
information (needed so we can check if command is executable on
specific paths) and setup (rtslib sets/updates the configfs ALUA
interface like it does for iblock or file).
For STPG, the target_core_user userspace daemon, tcmu-runner will
still execute the STPG, and to update the core/base LIO state it
will use the existing configfs interface. For RTPG, tcmu-runner
will loop over configfs and/or cache the state.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 05:14:40 +0000 (23:14 -0600)]
tcmu: return on first Opt parse failure
We only were returing failure if the last opt to be parsed failed.
This has a return failure when we first detect a failure.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 05:14:39 +0000 (23:14 -0600)]
tcmu: allow hw_max_sectors greater than 128
tcmu hard codes the hw_max_sectors to 128 which is a litle small.
Userspace uses the max_sectors to report the optimal IO size and
some initiators perform better with larger IOs (open-iscsi seems
to do better with 256 to 512 depending on the test).
(Fix do not display hw max sectors twice - MNC)
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Wed, 8 Mar 2017 08:09:59 +0000 (00:09 -0800)]
target: Drop pointless tfo->check_stop_free check
All in-tree fabric drivers provide a tfo->check_stop_free(),
so there is no need to do the extra check within existing
transport_cmd_check_stop_to_fabric() code.
Just to be sure, add a check in target_fabric_tf_ops_check()
to notify any out-of-tree drivers that might be missing it.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Helge Deller [Sat, 18 Mar 2017 16:13:27 +0000 (17:13 +0100)]
parisc: Fix system shutdown halt
On those parisc machines which don't provide a software power off
function, the system currently kills the init process at the end of a
shutdown and unexpectedly restarts insteads of halting.
Fix it by adding a loop which will not return.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.9+
Arvind Yadav [Tue, 14 Mar 2017 09:54:51 +0000 (15:24 +0530)]
parisc: perf: Fix potential NULL pointer dereference
Fix potential NULL pointer dereference and clean up
coding style errors (code indent, trailing whitespaces).
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Linus Torvalds [Sat, 18 Mar 2017 15:33:44 +0000 (08:33 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull CPU hotplug fix from Thomas Gleixner:
"A single fix preventing the concurrent execution of the CPU hotplug
callback install/invocation machinery. Long standing bug caused by a
massive brain slip of that Gleixner dude, which went unnoticed for
almost a year"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Serialize callback invocations proper
Linus Torvalds [Sat, 18 Mar 2017 00:25:14 +0000 (17:25 -0700)]
Merge tag 'pm-4.11-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few more intel_pstate issues and one small issue in the
cpufreq core.
Specifics:
- Fix breakage in the intel_pstate's debugfs interface for PID
controller tuning (Rafael Wysocki)
- Fix computations related to P-state limits in intel_pstate to avoid
excessive rounding errors leading to visible inaccuracies (Srinivas
Pandruvada, Rafael Wysocki)
- Add a missing newline to a message printed by one function in the
cpufreq core and clean up that function (Rafael Wysocki)"
* tag 'pm-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Fix and clean up show_cpuinfo_cur_freq()
cpufreq: intel_pstate: Avoid percentages in limits-related computations
cpufreq: intel_pstate: Correct frequency setting in the HWP mode
cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
Rafael J. Wysocki [Fri, 17 Mar 2017 23:45:09 +0000 (00:45 +0100)]
Merge branches 'pm-cpufreq-fixes' and 'intel_pstate-fixes'
* pm-cpufreq-fixes:
cpufreq: Fix and clean up show_cpuinfo_cur_freq()
* intel_pstate-fixes:
cpufreq: intel_pstate: Avoid percentages in limits-related computations
cpufreq: intel_pstate: Correct frequency setting in the HWP mode
cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
Linus Torvalds [Fri, 17 Mar 2017 21:16:22 +0000 (14:16 -0700)]
Merge tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"We have a handful of stable fixes to fix kernel warnings and other
bugs that have been around for a while. We've also found a few other
reference counting bugs and memory leaks since the initial 4.11 pull.
Stable Bugfixes:
- Fix decrementing nrequests in NFS v4.2 COPY to fix kernel warnings
- Prevent a double free in async nfs4_exchange_id()
- Squelch a kbuild sparse complaint for xprtrdma
Other Bugfixes:
- Fix a typo (NFS_ATTR_FATTR_GROUP_NAME) that causes a memory leak
- Fix a reference leak that causes kernel warnings
- Make nfs4_cb_sv_ops static to fix a sparse warning
- Respect a server's max size in CREATE_SESSION
- Handle errors from nfs4_pnfs_ds_connect
- Flexfiles layout shouldn't mark devices as unavailable"
* tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
pNFS/flexfiles: never nfs4_mark_deviceid_unavailable
pNFS: return status from nfs4_pnfs_ds_connect
NFSv4.1 respect server's max size in CREATE_SESSION
NFS prevent double free in async nfs4_exchange_id
nfs: make nfs4_cb_sv_ops static
xprtrdma: Squelch kbuild sparse complaint
NFS: fix the fault nrequests decreasing for nfs_inode COPY
NFSv4: fix a reference leak caused WARNING messages
nfs4: fix a typo of NFS_ATTR_FATTR_GROUP_NAME
Linus Torvalds [Fri, 17 Mar 2017 21:05:03 +0000 (14:05 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"An assorted pile of fixes along with some hardware enablement:
- a fix for a KASAN / branch profiling related boot failure
- some more fallout of the PUD rework
- a fix for the Always Running Timer which is not initialized when
the TSC frequency is known at boot time (via MSR/CPUID)
- a resource leak fix for the RDT filesystem
- another unwinder corner case fixup
- removal of the warning for duplicate NMI handlers because there are
legitimate cases where more than one handler can be registered at
the last level
- make a function static - found by sparse
- a set of updates for the Intel MID platform which got delayed due
to merge ordering constraints. It's hardware enablement for a non
mainstream platform, so there is no risk"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mpx: Make unnecessarily global function static
x86/intel_rdt: Put group node in rdtgroup_kn_unlock
x86/unwind: Fix last frame check for aligned function stacks
mm, x86: Fix native_pud_clear build error
x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y
x86/platform/intel-mid: Add power button support for Merrifield
x86/platform/intel-mid: Use common power off sequence
x86/platform: Remove warning message for duplicate NMI handlers
x86/tsc: Fix ART for TSC_KNOWN_FREQ
x86/platform/intel-mid: Correct MSI IRQ line for watchdog device
Linus Torvalds [Fri, 17 Mar 2017 21:01:40 +0000 (14:01 -0700)]
Merge branch 'x86-acpi-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 acpi fixes from Thomas Gleixner:
"This update deals with the fallout of the recent work to make
cpuid/node mappings persistent.
It turned out that the boot time ACPI based mapping tripped over ACPI
inconsistencies and caused regressions. It's partially reverted and
the fragile part replaced by an implementation which makes the mapping
persistent when a CPU goes online for the first time"
* 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
acpi/processor: Check for duplicate processor ids at hotplug time
acpi/processor: Implement DEVICE operator for processor enumeration
x86/acpi: Restore the order of CPU IDs
Revert"x86/acpi: Enable MADT APIs to return disabled apicids"
Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"
Linus Torvalds [Fri, 17 Mar 2017 20:59:52 +0000 (13:59 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of perf related fixes:
- fix a CR4.PCE propagation issue caused by usage of mm instead of
active_mm and therefore propagated the wrong value.
- perf core fixes, which plug a use-after-free issue and make the
event inheritance on fork more robust.
- a tooling fix for symbol handling"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf symbols: Fix symbols__fixup_end heuristic for corner cases
x86/perf: Clarify why x86_pmu_event_mapped() isn't racy
x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm
perf/core: Better explain the inherit magic
perf/core: Simplify perf_event_free_task()
perf/core: Fix event inheritance on fork()
perf/core: Fix use-after-free in perf_release()
Linus Torvalds [Fri, 17 Mar 2017 20:19:07 +0000 (13:19 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"From the scheduler departement:
- a bunch of sched deadline related fixes which deal with various
buglets and corner cases.
- two fixes for the loadavg spikes which are caused by the delayed
NOHZ accounting"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Use deadline instead of period when calculating overflow
sched/deadline: Throttle a constrained deadline task activated after the deadline
sched/deadline: Make sure the replenishment timer fires in the next period
sched/loadavg: Use {READ,WRITE}_ONCE() for sample window
sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting
sched/deadline: Add missing update_rq_clock() in dl_task_timer()
Linus Torvalds [Fri, 17 Mar 2017 20:16:24 +0000 (13:16 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Three fixes related to locking:
- fix a SIGKILL issue for RWSEM_GENERIC_SPINLOCK which has been fixed
for the XCHGADD variant already
- plug a potential use after free in the futex code
- prevent leaking a held spinlock in an futex error handling code
path"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y
futex: Add missing error handling to FUTEX_REQUEUE_PI
futex: Fix potential use-after-free in FUTEX_REQUEUE_PI
Linus Torvalds [Fri, 17 Mar 2017 20:13:35 +0000 (13:13 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Just a simple revert of a new sched_clock implementation which turned
out to be buggy"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock"
Weston Andros Adamson [Thu, 9 Mar 2017 17:56:49 +0000 (12:56 -0500)]
pNFS/flexfiles: never nfs4_mark_deviceid_unavailable
The flexfiles layout should never mark a device unavailable.
Move nfs4_mark_deviceid_unavailable out of nfs4_pnfs_ds_connect and call
directly from files layout where it's still needed.
The flexfiles driver still handles marked devices in error paths, but will
now print a rate limited warning.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Weston Andros Adamson [Thu, 9 Mar 2017 17:56:48 +0000 (12:56 -0500)]
pNFS: return status from nfs4_pnfs_ds_connect
The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it
can wait on another context to reach the same failure.
This checks that the rpc_create succeeded and returns the error to the
caller.
When an error is returned, both the files and flexfiles layouts will return
NULL from _prepare_ds(). The flexfiles layout will also return the layout
with the error NFS4ERR_NXIO.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Olga Kornievskaia [Wed, 8 Mar 2017 19:39:15 +0000 (14:39 -0500)]
NFSv4.1 respect server's max size in CREATE_SESSION
Currently client doesn't respect max sizes server returns in CREATE_SESSION.
nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0
so they never get set to the sizes returned by the server.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Olga Kornievskaia [Mon, 13 Mar 2017 14:36:19 +0000 (10:36 -0400)]
NFS prevent double free in async nfs4_exchange_id
Since rpc_task is async, the release function should be called which
will free the impl_id, scope, and owner.
Trond pointed at 2 more problems:
-- use of client pointer after free in the nfs4_exchangeid_release() function
-- cl_count mismatch if rpc_run_task() isn't run
Fixes:
8d89bd70bc9 ("NFS setup async exchange_id")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org # 4.9
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Jason Yan [Fri, 10 Mar 2017 02:48:13 +0000 (10:48 +0800)]
nfs: make nfs4_cb_sv_ops static
Fixes the following sparse warning:
fs/nfs/callback.c:235:21: warning: symbol 'nfs4_cb_sv_ops' was not
declared. Should it be static?
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Sat, 11 Mar 2017 20:52:47 +0000 (15:52 -0500)]
xprtrdma: Squelch kbuild sparse complaint
New complaint from kbuild for 4.9.y:
net/sunrpc/xprtrdma/verbs.c:489:19: sparse: incompatible types in
comparison expression (different type sizes)
verbs.c:
489 max_sge = min(ia->ri_device->attrs.max_sge, RPCRDMA_MAX_SEND_SGES);
I can't reproduce this running sparse here. Likewise, "make W=1
net/sunrpc/xprtrdma/verbs.o" never indicated any issue.
A little poking suggests that because the range of its values is
small, gcc can make the actual width of RPCRDMA_MAX_SEND_SGES
smaller than the width of an unsigned integer.
Fixes:
16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Kinglong Mee [Thu, 9 Mar 2017 03:36:36 +0000 (11:36 +0800)]
NFS: fix the fault nrequests decreasing for nfs_inode COPY
The nfs_commit_file for NFSv4.2's COPY operation goes through
the commit path for normal WRITE, but without increase nrequests,
so, the nrequests decreased in nfs_commit_release_pages is fault.
After that, the nrequests will be wrong.
[ 5670.299881] ------------[ cut here ]------------
[ 5670.300295] WARNING: CPU: 0 PID: 27656 at fs/nfs/inode.c:127 nfs_clear_inode+0x66/0x90 [nfs]
[ 5670.300558] Modules linked in: nfsv4(E) nfs(E) fscache(E) tun bridge stp llc fuse ip_set nfnetlink vmw_vsock_vmci_transport vsock snd_seq_midi snd_seq_midi_event ppdev f2fs coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_ens1371 intel_rapl_perf gameport snd_ac97_codec vmw_balloon ac97_bus snd_seq snd_pcm joydev snd_rawmidi snd_timer snd_seq_device snd soundcore nfit parport_pc parport acpi_cpufreq tpm_tis tpm_tis_core tpm i2c_piix4 vmw_vmci shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c vmwgfx drm_kms_helper ttm drm e1000 crc32c_intel mptspi scsi_transport_spi serio_raw mptscsih mptbase ata_generic pata_acpi fjes [last unloaded: fscache]
[ 5670.302925] CPU: 0 PID: 27656 Comm: umount.nfs4 Tainted: G W E 4.11.0-rc1+ #519
[ 5670.303292] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
[ 5670.304094] Call Trace:
[ 5670.304510] dump_stack+0x63/0x86
[ 5670.304917] __warn+0xcb/0xf0
[ 5670.305276] warn_slowpath_null+0x1d/0x20
[ 5670.305661] nfs_clear_inode+0x66/0x90 [nfs]
[ 5670.306093] nfs4_evict_inode+0x61/0x70 [nfsv4]
[ 5670.306480] evict+0xbb/0x1c0
[ 5670.306888] dispose_list+0x4d/0x70
[ 5670.307233] evict_inodes+0x178/0x1a0
[ 5670.307579] generic_shutdown_super+0x44/0xf0
[ 5670.307985] nfs_kill_super+0x21/0x40 [nfs]
[ 5670.308325] deactivate_locked_super+0x43/0x70
[ 5670.308698] deactivate_super+0x5a/0x60
[ 5670.309036] cleanup_mnt+0x3f/0x90
[ 5670.309407] __cleanup_mnt+0x12/0x20
[ 5670.309837] task_work_run+0x80/0xa0
[ 5670.310162] exit_to_usermode_loop+0x89/0x90
[ 5670.310497] syscall_return_slowpath+0xaa/0xb0
[ 5670.310875] entry_SYSCALL_64_fastpath+0xa7/0xa9
[ 5670.311197] RIP: 0033:0x7f1bb3617fe7
[ 5670.311545] RSP: 002b:
00007ffecbabb828 EFLAGS:
00000206 ORIG_RAX:
00000000000000a6
[ 5670.311906] RAX:
0000000000000000 RBX:
0000000001dca1f0 RCX:
00007f1bb3617fe7
[ 5670.312239] RDX:
000000000000000c RSI:
0000000000000001 RDI:
0000000001dc83c0
[ 5670.312653] RBP:
0000000001dc83c0 R08:
0000000000000001 R09:
0000000000000000
[ 5670.312998] R10:
0000000000000755 R11:
0000000000000206 R12:
00007ffecbabc66a
[ 5670.313335] R13:
0000000001dc83a0 R14:
0000000000000000 R15:
0000000000000000
[ 5670.313758] ---[ end trace
bf4bfe7764e4eb40 ]---
Cc: linux-kernel@vger.kernel.org
Fixes:
67911c8f18 ("NFS: Add nfs_commit_file()")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Linus Torvalds [Fri, 17 Mar 2017 19:16:44 +0000 (12:16 -0700)]
Merge tag 'afs-
20170316' of git://git./linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Fixes to the AFS filesystem in the kernel.
They fix a variety of bugs. These include some issues fixed for
consistency with other AFS implementations:
- handle AFS mode bits better
- use the client mtime rather than the server mtime in the protocol
- handle the server returning more or less data than was requested in
a FetchData call
- distinguish mountpoints from symlinks based on the mode bits rather
than preemptively reading every symlink to find out what it
actually represents
One other notable change for the user is that files are now flushed on
close analogously with other network filesystems"
* tag 'afs-
20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (28 commits)
afs: Don't wait for page writeback with the page lock held
afs: ->writepage() shouldn't call clear_page_dirty_for_io()
afs: Fix abort on signal while waiting for call completion
afs: Fix an off-by-one error in afs_send_pages()
afs: Fix afs_kill_pages()
afs: Fix page leak in afs_write_begin()
afs: Don't set PG_error on local EINTR or ENOMEM when filling a page
afs: Populate and use client modification time
afs: Better abort and net error handling
afs: Invalid op ID should abort with RXGEN_OPCODE
afs: Fix the maths in afs_fs_store_data()
afs: Use a bvec rather than a kvec in afs_send_pages()
afs: Make struct afs_read::remain 64-bit
afs: Fix AFS read bug
afs: Prevent callback expiry timer overflow
afs: Migrate vlocation fields to 64-bit
afs: security: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
afs: inode: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
afs: Distinguish mountpoints from symlinks by file mode alone
afs: Flush outstanding writes when an fd is closed
...
Linus Torvalds [Fri, 17 Mar 2017 19:14:49 +0000 (12:14 -0700)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"Just one change to add the statx syscall this time around"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: wire up statx syscall
Linus Torvalds [Fri, 17 Mar 2017 18:25:46 +0000 (11:25 -0700)]
Merge tag 'for-linus-4.11b-rc3-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A minor fix for using the appropriate refcount_t instead of atomic_t"
* tag 'for-linus-4.11b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers, xen: convert grant_map.users from atomic_t to refcount_t
Linus Torvalds [Fri, 17 Mar 2017 18:19:52 +0000 (11:19 -0700)]
Merge tag 'drm-fixes-for-v4.11-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Bunch of fixes across the drivers, in a St Patrick's day pull request
(please turn terminal colors to green on black or black on green for
full effect).
On the arm side, tilcdc, omap and malidp got fixes, while amd has some
powermanagement fixes, and intel has a set of fixes across the driver.
Nothing seems to bad or scary at this point"
* tag 'drm-fixes-for-v4.11-rc3' of git://people.freedesktop.org/~airlied/linux: (27 commits)
drm/amd/amdgpu: Fix debugfs reg read/write address width
drm/amdgpu/si: add dpm quirk for Oland
drm/radeon/si: add dpm quirk for Oland
drm: amd: remove broken include path
drm/amd/powerplay: fix copy error in smu7_clockpoweragting.c
drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled
drm/tilcdc: Fix hardcoded fail-return value in tilcdc_crtc_create()
drm/i915: Fix forcewake active domain tracking
drm/i915: Nuke skl_update_plane debug message from the pipe update critical section
drm/i915: use correct node for handling cache domain eviction
uapi: fix drm/omap_drm.h userspace compilation errors
drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
drm/amdgpu: fix parser init error path to avoid crash in parser fini
drm/amd/amdgpu: Disable GFX_PG on Carrizo until compute issues solved
drm: mali-dp: Fix smart layer not going to composition
drm: mali-dp: Remove mclk rate management
drm/i915: Drain the freed state from the tail of the next commit
drm/i915: Nuke debug messages from the pipe update critical section
drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl
drm/i915: Store a permanent error in obj->mm.pages
...
Ingo Molnar [Fri, 17 Mar 2017 14:13:28 +0000 (15:13 +0100)]
Merge tag 'perf-urgent-for-mingo-4.11-
20170317' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fix from Arnaldo Carvalho de Melo:
- Fix symbols__fixup_end heuristic for corner cases, such as JITted eBPF
programs, that are loaded at page aligned addresses, just after the
kernel proper (Daniel Borkmann)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann [Wed, 15 Mar 2017 21:53:37 +0000 (22:53 +0100)]
perf symbols: Fix symbols__fixup_end heuristic for corner cases
The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:
i) If the symbol has a start address (f.e. exposed via kallsyms)
that is at a page boundary, then the roundup(curr->start, 4096)
for the last entry will result in curr->start == curr->end with
a symbol length of zero.
ii) If the symbol has a start address that is shortly before a page
boundary, then also here, curr->end - curr->start will just be
very few bytes, where it's unrealistic that we could perform a
match against.
Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.
Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.
Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes:
2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andy Lutomirski [Thu, 16 Mar 2017 19:59:40 +0000 (12:59 -0700)]
x86/perf: Clarify why x86_pmu_event_mapped() isn't racy
Naively, it looks racy, but ->mmap_sem saves it. Add a comment and a
lockdep assertion.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/03a1e629063899168dfc4707f3bb6e581e21f5c6.1489694270.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>