Guillaume BRUN [Wed, 16 Nov 2022 14:35:23 +0000 (15:35 +0100)]
drm: bridge: dw_hdmi: fix preference of RGB modes over YUV420
Cheap monitors sometimes advertise YUV modes they don't really have
(HDMI specification mandates YUV support so even monitors without actual
support will often wrongfully advertise it) which results in YUV matches
and user forum complaints of a red tint to light colour display areas in
common desktop environments.
Moving the default RGB fall-back before YUV selection results in RGB
mode matching in most cases, reducing complaints.
Fixes:
6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Guillaume BRUN <the.cheaterman@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116143523.2126-1-the.cheaterman@gmail.com
Qiqi Zhang [Fri, 25 Nov 2022 10:45:58 +0000 (18:45 +0800)]
drm/bridge: ti-sn65dsi86: Fix output polarity setting bug
According to the description in ti-sn65dsi86's datasheet:
CHA_HSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
CHA_VSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (Default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
We should only set these bits when the polarity is negative.
Fixes:
a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Qiqi Zhang <eddy.zhang@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125104558.84616-1-eddy.zhang@rock-chips.com
Dawei Li [Wed, 9 Nov 2022 15:37:34 +0000 (23:37 +0800)]
drm/vmwgfx: Fix race issue calling pin_user_pages
pin_user_pages() is unsafe without protection of mmap_lock,
fix it by calling pin_user_pages_fast().
Fixes:
7a7a933edd6c ("drm/vmwgfx: Introduce VMware mks-guest-stats")
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/TYWP286MB23193621CB443E1E1959A00BCA3E9@TYWP286MB2319.JPNP286.PROD.OUTLOOK.COM
Tetsuo Handa [Thu, 17 Nov 2022 15:27:58 +0000 (00:27 +0900)]
fbcon: Use kzalloc() in fbcon_prepare_logo()
A kernel built with syzbot's config file reported that
scr_memcpyw(q, save, array3_size(logo_lines, new_cols, 2))
causes uninitialized "save" to be copied.
----------
[drm] Initialized vgem 1.0.0
20120112 for vgem on minor 0
[drm] Initialized vkms 1.0.0
20180514 for vkms on minor 1
Console: switching to colour frame buffer device 128x48
=====================================================
BUG: KMSAN: uninit-value in do_update_region+0x4b8/0xba0
do_update_region+0x4b8/0xba0
update_region+0x40d/0x840
fbcon_switch+0x3364/0x35e0
redraw_screen+0xae3/0x18a0
do_bind_con_driver+0x1cb3/0x1df0
do_take_over_console+0x11cb/0x13f0
fbcon_fb_registered+0xacc/0xfd0
register_framebuffer+0x1179/0x1320
__drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
drm_fbdev_client_hotplug+0xbea/0xda0
drm_fbdev_generic_setup+0x65e/0x9d0
vkms_init+0x9f3/0xc76
(...snipped...)
Uninit was stored to memory at:
fbcon_prepare_logo+0x143b/0x1940
fbcon_init+0x2c1b/0x31c0
visual_init+0x3e7/0x820
do_bind_con_driver+0x14a4/0x1df0
do_take_over_console+0x11cb/0x13f0
fbcon_fb_registered+0xacc/0xfd0
register_framebuffer+0x1179/0x1320
__drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
drm_fbdev_client_hotplug+0xbea/0xda0
drm_fbdev_generic_setup+0x65e/0x9d0
vkms_init+0x9f3/0xc76
(...snipped...)
Uninit was created at:
__kmem_cache_alloc_node+0xb69/0x1020
__kmalloc+0x379/0x680
fbcon_prepare_logo+0x704/0x1940
fbcon_init+0x2c1b/0x31c0
visual_init+0x3e7/0x820
do_bind_con_driver+0x14a4/0x1df0
do_take_over_console+0x11cb/0x13f0
fbcon_fb_registered+0xacc/0xfd0
register_framebuffer+0x1179/0x1320
__drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
drm_fbdev_client_hotplug+0xbea/0xda0
drm_fbdev_generic_setup+0x65e/0x9d0
vkms_init+0x9f3/0xc76
(...snipped...)
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc4-00356-g8f2975c2bb4c #924
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
----------
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cad03d25-0ea0-32c4-8173-fd1895314bce@I-love.SAKURA.ne.jp
Dawei Li [Fri, 4 Nov 2022 16:05:36 +0000 (00:05 +0800)]
dma-buf: fix racing conflict of dma_heap_add()
Racing conflict could be:
task A task B
list_for_each_entry
strcmp(h->name))
list_for_each_entry
strcmp(h->name)
kzalloc kzalloc
...... .....
device_create device_create
list_add
list_add
The root cause is that task B has no idea about the fact someone
else(A) has inserted heap with same name when it calls list_add,
so a potential collision occurs.
Fixes:
c02a81fba74f ("dma-buf: Add dma-buf heaps framework")
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/TYCP286MB2323873BBDF88020781FB986CA3B9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Jason Ekstrand [Tue, 2 Aug 2022 21:01:58 +0000 (16:01 -0500)]
dma-buf: Use dma_fence_unwrap_for_each when importing fences
Ever since
68129f431faa ("dma-buf: warn about containers in dma_resv object"),
dma_resv_add_shared_fence will warn if you attempt to add a container fence.
While most drivers were fine, fences can also be added to a dma_resv via the
recently added DMA_BUF_IOCTL_IMPORT_SYNC_FILE. Use dma_fence_unwrap_for_each
to add each fence one at a time.
Fixes:
594740497e99 ("dma-buf: Add an API for importing sync files (v10)")
Signed-off-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reported-by: Sarah Walker <Sarah.Walker@imgtec.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220802210158.4162525-1-jason.ekstrand@collabora.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Christian König [Fri, 18 Nov 2022 12:32:30 +0000 (13:32 +0100)]
drm/amdgpu: handle gang submit before VMID
Otherwise it can happen that not all gang members can get a VMID
assigned and we deadlock.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Fixes:
68ce8b242242 ("drm/amdgpu: add gang submit backend v2")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118153023.312582-1-christian.koenig@amd.com
Simon Rettberg [Thu, 6 Oct 2022 09:33:14 +0000 (11:33 +0200)]
drm/display: Don't assume dual mode adaptors support i2c sub-addressing
Current dual mode adaptor ("DP++") detection code assumes that all
adaptors support i2c sub-addressing for read operations from the
DP-HDMI adaptor ID buffer. It has been observed that multiple
adaptors do not in fact support this, and always return data starting
at register 0. On affected adaptors, the code fails to read the proper
registers that would identify the device as a type 2 adaptor, and
handles those as type 1, limiting the TMDS clock to 165MHz, even if
the according register would announce a higher TMDS clock.
Fix this by always reading the ID buffer starting from offset 0, and
discarding any bytes before the actual offset of interest.
We tried finding authoritative documentation on whether or not this is
allowed behaviour, but since all the official VESA docs are paywalled,
the best we could come up with was the spec sheet for Texas Instruments'
SNx5DP149 chip family.[1] It explicitly mentions that sub-addressing is
supported for register writes, but *not* for reads (See NOTE in
section 8.5.3). Unless TI openly decided to violate the VESA spec, one
could take that as a hint that sub-addressing is in fact not mandated
by VESA.
The other two adaptors affected used the PS8409(A) and the LT8611,
according to the data returned from their ID buffers.
[1] https://www.ti.com/lit/ds/symlink/sn75dp149.pdf
Cc: stable@vger.kernel.org
Signed-off-by: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
Reviewed-by: Rafael Gieschke <rafael.gieschke@rz.uni-freiburg.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006113314.41101987@computer
Acked-by: Jani Nikula <jani.nikula@intel.com>
Simon Ser [Mon, 17 Oct 2022 15:31:57 +0000 (15:31 +0000)]
Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"
This reverts commit
981f09295687f856d5345e19c7084aca481c1395.
It turns out this causes logically active but disconnected DP MST
connectors to disappear from the KMS resources list, and Mutter
then assumes the connector is already disabled. Later on Mutter tries
to re-use the same CRTC but fails since on the kernel side it's still
tied to the disconnected DP MST connector.
Signed-off-by: Simon Ser <contact@emersion.fr>
Tested-by: Jonas Ådahl <jadahl@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-1-contact@emersion.fr
Christian König [Wed, 9 Nov 2022 18:54:09 +0000 (19:54 +0100)]
drm/amdgpu: use the last IB as gang leader v2
It turned out that not the last IB specified is the gang leader,
but instead the last job allocated.
This is a bit unfortunate and not very intuitive for the CS
interface, so try to fix this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115094206.6181-1-christian.koenig@amd.com
Tested-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes:
4624459c84d7 ("drm/amdgpu: add gang submit frontend v6")
Erico Nunes [Thu, 27 Oct 2022 07:32:00 +0000 (09:32 +0200)]
drm/lima: Fix opp clkname setting in case of missing regulator
Commit
d8c32d3971e4 ("drm/lima: Migrate to dev_pm_opp_set_config()")
introduced a regression as it may undo the clk_names setting in case
the optional regulator is missing. This resulted in test and performance
regressions with lima.
Restore the old behavior where clk_names is set separately so it is not
undone in case of a missing optional regulator.
Fixes:
d8c32d3971e4 ("drm/lima: Migrate to dev_pm_opp_set_config()")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027073200.3885839-1-nunes.erico@gmail.com
Shang XiaoJing [Tue, 1 Nov 2022 07:07:16 +0000 (15:07 +0800)]
drm: Fix potential null-ptr-deref in drm_vblank_destroy_worker()
drm_vblank_init() call drmm_add_action_or_reset() with
drm_vblank_init_release() as action. If __drmm_add_action() failed, will
directly call drm_vblank_init_release() with the vblank whose worker is
NULL. As the resule, a null-ptr-deref will happen in
kthread_destroy_worker(). Add the NULL check before calling
drm_vblank_destroy_worker().
BUG: null-ptr-deref
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 5 PID: 961 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf-dirty
RIP: 0010:kthread_destroy_worker+0x25/0xb0
Call Trace:
<TASK>
drm_vblank_init_release+0x124/0x220 [drm]
? drm_crtc_vblank_restore+0x8b0/0x8b0 [drm]
__drmm_add_action_or_reset+0x41/0x50 [drm]
drm_vblank_init+0x282/0x310 [drm]
vkms_init+0x35f/0x1000 [vkms]
? 0xffffffffc4508000
? lock_is_held_type+0xd7/0x130
? __kmem_cache_alloc_node+0x1c2/0x2b0
? lock_is_held_type+0xd7/0x130
? 0xffffffffc4508000
do_one_initcall+0xd0/0x4f0
...
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes:
5e6c2b4f9161 ("drm/vblank: Add vblank works")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101070716.9189-3-shangxiaojing@huawei.com
Shang XiaoJing [Tue, 1 Nov 2022 07:07:15 +0000 (15:07 +0800)]
drm/drv: Fix potential memory leak in drm_dev_init()
drm_dev_init() will add drm_dev_init_release() as a callback. When
drmm_add_action() failed, the release function won't be added. As the
result, the ref cnt added by device_get() in drm_dev_init() won't be put
by drm_dev_init_release(), which leads to the memleak. Use
drmm_add_action_or_reset() instead of drmm_add_action() to prevent
memleak.
unreferenced object 0xffff88810bc0c800 (size 2048):
comm "modprobe", pid 8322, jiffies
4305809845 (age 15.292s)
hex dump (first 32 bytes):
e8 cc c0 0b 81 88 ff ff ff ff ff ff 00 00 00 00 ................
20 24 3c 0c 81 88 ff ff 18 c8 c0 0b 81 88 ff ff $<.............
backtrace:
[<
000000007251f72d>] __kmalloc+0x4b/0x1c0
[<
0000000045f21f26>] platform_device_alloc+0x2d/0xe0
[<
000000004452a479>] platform_device_register_full+0x24/0x1c0
[<
0000000089f4ea61>] 0xffffffffa0736051
[<
00000000235b2441>] do_one_initcall+0x7a/0x380
[<
0000000001a4a177>] do_init_module+0x5c/0x230
[<
000000002bf8a8e2>] load_module+0x227d/0x2420
[<
00000000637d6d0a>] __do_sys_finit_module+0xd5/0x140
[<
00000000c99fc324>] do_syscall_64+0x3f/0x90
[<
000000004d85aa77>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes:
2cbf7fc6718b ("drm: Use drmm_ for drm_dev_init cleanup")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101070716.9189-2-shangxiaojing@huawei.com
Aishwarya Kothari [Wed, 31 Aug 2022 14:16:22 +0000 (16:16 +0200)]
drm/panel: simple: set bpc field for logic technologies displays
In case bpc is not set for a panel it then throws a WARN(). Add bpc to
the panels logictechno_lt170410_2whc and logictechno_lt161010_2nh.
Fixes:
5728fe7fa539 ("drm/panel: simple: add display timings for logic technologies displays")
Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831141622.39605-1-francesco.dolcini@toradex.com
Gaosheng Cui [Thu, 10 Nov 2022 09:44:45 +0000 (17:44 +0800)]
drm/vc4: kms: Fix IS_ERR() vs NULL check for vc4_kms
The drm_atomic_get_new_private_obj_state() function returns NULL
on error path, drm_atomic_get_old_private_obj_state() function
returns NULL on error path, too, they does not return error pointers.
By the way, vc4_hvs_get_new/old_global_state() should return
ERR_PTR(-EINVAL), otherwise there will be null-ptr-defer issue,
such as follows:
In function vc4_atomic_commit_tail():
|-- old_hvs_state = vc4_hvs_get_old_global_state(state); <-- return NULL
|-- if (WARN_ON(IS_ERR(old_hvs_state))) <-- no return
|-- unsigned long state_rate = max(old_hvs_state->core_clock_rate,
new_hvs_state->core_clock_rate); <-- null-ptr-defer
Fixes:
9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110094445.2930509-6-cuigaosheng1@huawei.com
Robin Murphy [Tue, 8 Nov 2022 17:06:19 +0000 (17:06 +0000)]
drm/panfrost: Split io-pgtable requests properly
Although we don't use 1GB block mappings, we still need to split
map/unmap requests at 1GB boundaries to match what io-pgtable expects.
Fix that, and add some explanation to make sense of it all.
Fixes:
3740b081795a ("drm/panfrost: Update io-pgtable API")
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/49e54bb4019cd06e01549b106d7ac37c3d182cd3.1667927179.git.robin.murphy@arm.com
Ma Jun [Wed, 14 Sep 2022 12:53:31 +0000 (20:53 +0800)]
drm/amdgpu: Fix the lpfn checking condition in drm buddy
Because the value of man->size is changed during suspend/resume process,
use mgr->mm.size instead of man->size here for lpfn checking.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914125331.2467162-1-Jun.Ma2@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Hans de Goede [Sun, 6 Nov 2022 21:50:52 +0000 (22:50 +0100)]
drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017)
Like the Acer Switch One 10 S1003, for which there already is a quirk,
the Acer Switch V 10 (SW5-017) has a 800x1280 portrait screen mounted
in the tablet part of a landscape oriented 2-in-1. Add a quirk for this.
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20221106215052.66995-1-hdegoede@redhat.com
Hans de Goede [Mon, 19 Sep 2022 13:32:58 +0000 (15:32 +0200)]
drm: panel-orientation-quirks: Add quirk for Nanote UMPC-01
The Nanote UMPC-01 is a mini laptop with a 1200x1920 portrait screen
mounted in a landscape oriented clamshell case. Add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919133258.711639-1-hdegoede@redhat.com
Steven Price [Thu, 3 Nov 2022 11:40:36 +0000 (11:40 +0000)]
drm/panfrost: Remove type name from internal struct again
Commit
72655fb942c1 ("drm/panfrost: replace endian-specific types with
native ones") accidentally reverted part of the parent commit
7228d9d79248 ("drm/panfrost: Remove type name from internal structs")
leading to the situation that the Panfrost UAPI header still doesn't
compile correctly in C++.
Revert the accidental revert and pass me a brown paper bag.
Reported-by: Alyssa Rosenzweig <alyssa@collabora.com>
Fixes:
72655fb942c1 ("drm/panfrost: replace endian-specific types with native ones")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103114036.1581854-1-steven.price@arm.com
Yuan Can [Thu, 3 Nov 2022 01:47:05 +0000 (01:47 +0000)]
drm/vc4: Fix missing platform_unregister_drivers() call in vc4_drm_register()
A problem about modprobe vc4 failed is triggered with the following log
given:
[ 420.327987] Error: Driver 'vc4_hvs' is already registered, aborting...
[ 420.333904] failed to register platform driver vc4_hvs_driver [vc4]: -16
modprobe: ERROR: could not insert 'vc4': Device or resource busy
The reason is that vc4_drm_register() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
fails, it returns without unregistering all the vc4 drivers, resulting the
vc4 can never be installed later.
A simple call graph is shown as below:
vc4_drm_register()
platform_register_drivers() # all vc4 drivers are registered
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without unregister drivers
Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.
Fixes:
c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103014705.109322-1-yuancan@huawei.com
maxime@cerno.tech [Fri, 21 Oct 2022 13:13:39 +0000 (15:13 +0200)]
drm/vc4: hdmi: Fix HSM clock too low on Pi4
Commit
ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at
runtime_resume") reintroduced the call to clk_set_min_rate in an attempt
to fix the boot without a monitor connected on the RaspberryPi3.
However, that introduced a regression breaking the display output
entirely (black screen but no vblank timeout) on the Pi4.
This is due to the fact that we now have in a typical modeset at boot,
in vc4_hdmi_encoder_pre_crtc_configure(), we have a first call to
clk_set_min_rate() asking for the minimum rate of the HSM clock for our
given resolution, and then a call to pm_runtime_resume_and_get(). We
will thus execute vc4_hdmi_runtime_resume() which, since the commit
mentioned above, will call clk_set_min_rate() a second time with the
absolute minimum rate we want to enforce on the HSM clock.
We're thus effectively erasing the minimum mandated by the mode we're
trying to set. The fact that only the Pi4 is affected is due to the fact
that it uses a different clock driver that tries to minimize the HSM
clock at all time. It will thus lower the HSM clock rate to 120MHz on
the second clk_set_min_rate() call.
The Pi3 doesn't use the same driver and will not change the frequency on
the second clk_set_min_rate() call since it's still within the new
boundaries and it doesn't have the code to minimize the clock rate as
needed. So even though the boundaries are still off, the clock rate is
still the right one for our given mode, so everything works.
There is a lot of moving parts, so I couldn't find any obvious
solution:
- Reverting the original is not an option, as that would break the Pi3
again.
- We can't move the clk_set_min_rate() call in _pre_crtc_configure()
since because, on the Pi3, the HSM clock has the CLK_SET_RATE_GATE
flag which prevents the clock rate from being changed after it's
been enabled. Our calls to clk_set_min_rate() can change it, so they
need to be done before clk_prepare_enable().
- We can't remove the call to clk_prepare_enable() from the
runtime_resume hook to put it into _pre_crtc_configure() either,
since we need that clock to be enabled to access the registers, and
we can't count on the fact that the display will be active in all
situations (doing any CEC operation, or listing the modes while
inactive are valid for example()).
- We can't drop the call to clk_set_min_rate() in
_pre_crtc_configure() since we would need to still enforce the
minimum rate for a given resolution, and runtime_resume doesn't have
access to the current mode, if there's any.
- We can't copy the TMDS character rate into vc4_hdmi and reuse it
since, because it's part of the KMS atomic state, it needs to be
protected by a mutex. Unfortunately, some functions (CEC operations,
mostly) can be reentrant (through the CEC framework) and still need
a pm_runtime_get.
However, we can work around this issue by leveraging the fact that the
clk_set_min_rate() calls set boundaries for its given struct clk, and
that each different clk_get() call will return a different instance of
struct clk. The clock framework will then aggregate the boundaries for
each struct clk instances linked to a given clock, plus its hardware
boundaries, and will use that.
We can thus get an extra HSM clock user for runtime_pm use only, and use
our different clock instances depending on the context: runtime_pm will
use its own to set the absolute minimum clock setup so that we never
lock the CPU waiting for a register access, and the modeset part will
set its requirement for the current resolution. And we let the CCF do
the coordination.
It's not an ideal solution, but it's fairly unintrusive and doesn't
really change any part of the logic so it looks like a rather safe fix.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2136234
Fixes:
ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at runtime_resume")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20221021131339.2203291-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
maxime@cerno.tech [Mon, 24 Oct 2022 09:36:34 +0000 (11:36 +0200)]
drm/vc4: hdmi: Fix outdated function name in comment
A comment introduced by commit
6bed2ea3cb38 ("drm/vc4: hdmi: Reset link
on hotplug") mentions a drm_atomic_helper_connector_hdmi_reset_link()
function that was part of the earlier versions but got moved internally
and is now named vc4_hdmi_reset_link(). Let's fix the function name.
Fixes:
6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
maxime@cerno.tech [Mon, 24 Oct 2022 09:36:33 +0000 (11:36 +0200)]
drm/vc4: hdmi: Take our lock to reset the link
We access some fields protected by our internal mutex in
vc4_hdmi_reset_link() (saved_adjusted_mode, output_bpc, output_format)
and are calling functions that need to have that lock taken
(vc4_hdmi_supports_scrambling()).
However, the current code doesn't lock that mutex. Let's make sure it
does.
Fixes:
6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Nathan Huckleberry [Tue, 13 Sep 2022 20:55:44 +0000 (13:55 -0700)]
drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid
The mode_valid field in drm_connector_helper_funcs is expected to be of
type:
enum drm_mode_status (* mode_valid) (struct drm_connector *connector,
struct drm_display_mode *mode);
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of imx_tve_connector_mode_valid should be changed from
int to enum drm_mode_status.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913205544.155106-1-nhuck@google.com
Liu Ying [Sun, 9 Oct 2022 02:35:27 +0000 (10:35 +0800)]
drm/imx: Kconfig: Remove duplicated 'select DRM_KMS_HELPER' line
A duplicated line 'select DRM_KMS_HELPER' was introduced in Kconfig file
by commit
09717af7d13d ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option"),
so remove it.
Fixes:
09717af7d13d ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221009023527.3669647-1-victor.liu@nxp.com
Hector Martin [Thu, 27 Oct 2022 13:57:11 +0000 (22:57 +0900)]
drm/format-helper: Only advertise supported formats for conversion
drm_fb_build_fourcc_list() currently returns all emulated formats
unconditionally as long as the native format is among them, even though
not all combinations have conversion helpers. Although the list is
arguably provided to userspace in precedence order, userspace can pick
something out-of-order (and thus break when it shouldn't), or simply
only support a format that is unsupported (and thus think it can work,
which results in the appearance of a hang as FB blits fail later on,
instead of the initialization error you'd expect in this case).
Add checks to filter the list of emulated formats to only those
supported for conversion to the native format. This presumes that there
is a single native format (only the first is checked, if there are
multiple). Refactoring this API to drop the native list or support it
properly (by returning the appropriate emulated->native mapping table)
is left for a future patch.
The simpledrm driver is left as-is with a full table of emulated
formats. This keeps all currently working conversions available and
drops all the broken ones (i.e. this a strict bugfix patch, adding no
new supported formats nor removing any actually working ones). In order
to avoid proliferation of emulated formats, future drivers should
advertise only XRGB8888 as the sole emulated format (since some
userspace assumes its presence).
This fixes a real user regression where the ?RGB2101010 support commit
started advertising it unconditionally where not supported, and KWin
decided to start to use it over the native format and broke, but also
the fixes the spurious RGB565/RGB888 formats which have been wrongly
unconditionally advertised since the dawn of simpledrm.
Fixes:
6ea966fca084 ("drm/simpledrm: Add [AX]RGB2101010 formats")
Fixes:
11e8f5fd223b ("drm: Add simpledrm driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027135711.24425-1-marcan@marcan.st
Michael Tretter [Fri, 28 Oct 2022 09:52:06 +0000 (11:52 +0200)]
drm/rockchip: vop2: disable planes when disabling the crtc
The vop2 driver needs to explicitly disable the planes if the crtc is
disabled. Unless the planes are explicitly disabled, the address of the
last framebuffer is kept in the registers of the VOP2. When re-enabling
the encoder after it has been disabled by the driver, the VOP2 will
start and read the framebuffer that has been freed but is still pointed
to by the register. The iommu will catch these read accesses and print
errors.
Explicitly disable the planes when the crtc is disabled to reset the
registers.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028095206.2136601-3-m.tretter@pengutronix.de
Michael Tretter [Fri, 28 Oct 2022 09:52:05 +0000 (11:52 +0200)]
drm/rockchip: vop2: fix null pointer in plane_atomic_disable
If the vop2_plane_atomic_disable function is called with NULL as a
state, accessing the old_pstate runs into a null pointer exception.
However, the drm_atomic_helper_disable_planes_on_crtc function calls the
atomic_disable callback with state NULL.
Allow to disable a plane without passing a plane state by checking the
old_pstate only if a state is passed.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028095206.2136601-2-m.tretter@pengutronix.de
Ondrej Jirman [Sun, 23 Oct 2022 16:07:47 +0000 (18:07 +0200)]
drm/rockchip: dsi: Fix VOP selection on SoCs that support it
lcdsel_grf_reg is defined as u32, so "< 0" comaprison is always false,
which breaks VOP selection on eg. RK3399. Compare against 0.
Fixes:
f3aaa6125b6f ("drm/rockchip: dsi: add rk3568 support")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221023160747.607943-1-megi@xff.cz
John Keeping [Thu, 20 Oct 2022 18:12:47 +0000 (19:12 +0100)]
drm/rockchip: fix fbdev on non-IOMMU devices
When switching to the generic fbdev infrastructure, it was missed that
framebuffers were created with the alloc_kmap parameter to
rockchip_gem_create_object() set to true. The generic infrastructure
calls this via the .dumb_create() driver operation and thus creates a
buffer without an associated kmap.
alloc_kmap only makes a difference on devices without an IOMMU, but when
it is missing rockchip_gem_prime_vmap() fails and the framebuffer cannot
be used.
Detect the case where a buffer is being allocated for the framebuffer
and ensure a kernel mapping is created in this case.
Fixes:
24af7c34b290 ("drm/rockchip: use generic fbdev setup")
Reported-by: Johan Jonker <jbx6244@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020181248.2497065-1-john@metanate.com
Brian Norris [Thu, 20 Oct 2022 00:03:49 +0000 (17:03 -0700)]
drm/rockchip: dsi: Force synchronous probe
We can't safely probe a dual-DSI display asynchronously
(driver_async_probe='*' or driver_async_probe='dw-mipi-dsi-rockchip'
cmdline), because dw_mipi_dsi_rockchip_find_second() pokes one DSI
device's drvdata from the other device without any locking.
Request synchronous probe, at least until this driver learns some
appropriate locking for dual-DSI initialization.
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019170255.2.I6b985b0ca372b7e35c6d9ea970b24bcb262d4fc1@changeid
Brian Norris [Thu, 20 Oct 2022 00:03:48 +0000 (17:03 -0700)]
drm/rockchip: dsi: Clean up 'usage_mode' when failing to attach
If we fail to attach the first time (especially: EPROBE_DEFER), we fail
to clean up 'usage_mode', and thus will fail to attach on any subsequent
attempts, with "dsi controller already in use".
Re-set to DW_DSI_USAGE_IDLE on attach failure.
This is especially common to hit when enabling asynchronous probe on a
duel-DSI system (such as RK3399 Gru/Scarlet), such that we're more
likely to fail dw_mipi_dsi_rockchip_find_second() the first time.
Fixes:
71f68fe7f121 ("drm/rockchip: dsi: add ability to work as a phy instead of full dsi")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019170255.1.Ia68dfb27b835d31d22bfe23812baf366ee1c6eac@changeid
Aurelien Jarno [Mon, 26 Sep 2022 20:37:52 +0000 (22:37 +0200)]
drm/rockchip: dw_hdmi: filter regulator -EPROBE_DEFER error messages
When the avdd-0v9 or avdd-1v8 supply are not yet available, EPROBE_DEFER
is returned by rockchip_hdmi_parse_dt(). This causes the following error
message to be printed multiple times:
dwhdmi-rockchip
fe0a0000.hdmi: [drm:dw_hdmi_rockchip_bind [rockchipdrm]] *ERROR* Unable to parse OF data
Fix that by not printing the message when rockchip_hdmi_parse_dt()
returns -EPROBE_DEFER.
Fixes:
ca80c4eb4b01 ("drm/rockchip: dw_hdmi: add regulator support")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926203752.5430-1-aurelien@aurel32.net
Michał Mirosław [Thu, 27 Oct 2022 00:06:16 +0000 (02:06 +0200)]
fbdev/core: Avoid uninitialized read in aperture_remove_conflicting_pci_device()
Return on error directly from the BAR-iterating loop instead of
break+return.
This is actually a cosmetic fix, since it would be highly unusual to
have this called for a PCI device without any memory BARs.
Fixes:
9d69ef183815 ("fbdev/core: Remove remove_conflicting_pci_framebuffers()")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/e75323732bedc46d613d72ecb40f97e3bc75eea8.1666829073.git.mirq-linux@rere.qmqm.pl
Christian König [Tue, 27 Sep 2022 16:43:03 +0000 (18:43 +0200)]
drm/scheduler: fix fence ref counting
We leaked dependency fences when processes were beeing killed.
Additional to that grab a reference to the last scheduled fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929180151.139751-1-christian.koenig@amd.com
Maarten Lankhorst [Mon, 24 Oct 2022 09:40:08 +0000 (11:40 +0200)]
Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes
Update to v6.1-rc2 to grab more fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Linus Torvalds [Sun, 23 Oct 2022 22:27:33 +0000 (15:27 -0700)]
Linux 6.1-rc2
Linus Torvalds [Sun, 23 Oct 2022 22:00:43 +0000 (15:00 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings for very
large and very sparse device topology
- Work around a relocation handling error when compiling the nVHE
object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock for too long
by limiting the walk to the largest block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools: include: sync include/api/linux/kvm.h
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
kvm: Add support for arch compat vm ioctls
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
KVM: arm64: vgic: Fix exit condition in scan_its_table()
KVM: arm64: nvhe: Fix build with profile optimization
KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
KVM: arm64: selftests: Fix multiple versions of GIC creation
KVM: arm64: Enable stack protection and branch profiling for VHE
KVM: arm64: Limit stage2_apply_range() batch size to largest block
KVM: arm64: Work out supported block level at compile time
Jason A. Donenfeld [Sat, 8 Oct 2022 15:47:00 +0000 (09:47 -0600)]
Revert "mfd: syscon: Remove repetition of the regmap_get_val_endian()"
This reverts commit
72a95859728a7866522e6633818bebc1c2519b17.
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes:
72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 23 Oct 2022 19:01:01 +0000 (12:01 -0700)]
kernel/utsname_sysctl.c: Fix hostname polling
Commit
bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.
Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c. But apparently journald-systemd
actually uses this to detect hostname changes.
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Fixes:
bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 23 Oct 2022 17:14:45 +0000 (10:14 -0700)]
Merge tag 'perf_urgent_for_v6.1_rc2' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
Linus Torvalds [Sun, 23 Oct 2022 17:10:55 +0000 (10:10 -0700)]
Merge tag 'sched_urgent_for_v6.1_rc2' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Adjust code to not trip up CFI
- Fix sched group cookie matching
* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Introduce struct balance_callback to avoid CFI mismatches
sched/core: Fix comparison in sched_group_cookie_match()
Linus Torvalds [Sun, 23 Oct 2022 17:07:01 +0000 (10:07 -0700)]
Merge tag 'objtool_urgent_for_v6.1_rc2' of git://git./linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Fix ORC stack unwinding when GCOV is enabled
* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unreliable stack dump with gcov
Linus Torvalds [Sun, 23 Oct 2022 17:01:34 +0000 (10:01 -0700)]
Merge tag 'x86_urgent_for_v6.0_rc2' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As usually the case, right after a major release, the tip urgent
branches accumulate a couple more fixes than normal. And here is the
x86, a bit bigger, urgent pile.
- Use the correct CPU capability clearing function on the error path
in Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache
allocation on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration
info properly
- Drop a -mabi=ms compiler option check as both compilers support it
now anyway
- A couple of fixes to how the initial, statically allocated FPU
buffer state is setup and its interaction with dynamic states at
runtime"
* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
x86/ftrace: Remove ftrace_epilogue()
x86/resctrl: Fix min_cbm_bits for AMD
x86/microcode/AMD: Apply the patch early on every logical thread
x86/topology: Fix duplicated core ID within a package
x86/topology: Fix multiple packages shown on a single-package system
hwmon/coretemp: Handle large core ID value
x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
x86/fpu: Exclude dynamic states from init_fpstate
x86/fpu: Fix the init_fpstate size check with the actual size
x86/fpu: Configure init_fpstate attributes orderly
Linus Torvalds [Sun, 23 Oct 2022 16:55:50 +0000 (09:55 -0700)]
Merge tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux
Pull io_uring follow-up from Jens Axboe:
"Currently the zero-copy has automatic fallback to normal transmit, and
it was decided that it'd be cleaner to return an error instead if the
socket type doesn't support it.
Zero-copy does work with UDP and TCP, it's more of a future proofing
kind of thing (eg for samba)"
* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
io_uring/net: fail zc sendmsg when unsupported by socket
io_uring/net: fail zc send when unsupported by socket
net: flag sockets supporting msghdr originated zerocopy
Linus Torvalds [Sat, 22 Oct 2022 23:04:34 +0000 (16:04 -0700)]
Merge tag 'hwmon-for-v6.1-rc2' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
Linus Torvalds [Sat, 22 Oct 2022 22:59:46 +0000 (15:59 -0700)]
Merge tag 'i2c-for-6.1-rc2' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"RPM fix for qcom-cci, platform module alias for xiic, build warning
fix for mlxbf, typo fixes in comments"
* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxbf: depend on ACPI; clean away ifdeffage
i2c: fix spelling typos in comments
i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
i2c: xiic: Add platform module alias
Linus Torvalds [Sat, 22 Oct 2022 22:52:36 +0000 (15:52 -0700)]
Merge tag 'pci-v6.1-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Revert a simplification that broke pci-tegra due to a masking error
- Update MAINTAINERS for Kishon's email address change and TI
DRA7XX/J721E maintainer change
* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
Linus Torvalds [Sat, 22 Oct 2022 22:30:15 +0000 (15:30 -0700)]
Merge tag 'media/v6.1-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
Pavel Begunkov [Fri, 21 Oct 2022 10:16:41 +0000 (11:16 +0100)]
io_uring/net: fail zc sendmsg when unsupported by socket
The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 21 Oct 2022 10:16:40 +0000 (11:16 +0100)]
io_uring/net: fail zc send when unsupported by socket
If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 21 Oct 2022 10:16:39 +0000 (11:16 +0100)]
net: flag sockets supporting msghdr originated zerocopy
We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wilken Gottwalt [Sat, 8 Oct 2022 11:35:34 +0000 (11:35 +0000)]
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
Also update the documentation accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Paolo Bonzini [Sat, 22 Oct 2022 11:43:52 +0000 (07:43 -0400)]
tools: include: sync include/api/linux/kvm.h
Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Fixes:
17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexander Graf [Mon, 17 Oct 2022 18:45:41 +0000 (20:45 +0200)]
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.
This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes:
1a155254ff937 ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <
20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexander Graf [Mon, 17 Oct 2022 18:45:40 +0000 (20:45 +0200)]
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <
20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexander Graf [Mon, 17 Oct 2022 18:45:39 +0000 (20:45 +0200)]
kvm: Add support for arch compat vm ioctls
We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <
20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 22 Oct 2022 07:33:58 +0000 (03:33 -0400)]
Merge tag 'kvm-riscv-fixes-6.1-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 6.1, take #1
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
Paolo Bonzini [Sat, 22 Oct 2022 07:33:26 +0000 (03:33 -0400)]
Merge tag 'kvmarm-fixes-6.1-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.1, take #2
- Fix a bug preventing restoring an ITS containing mappings
for very large and very sparse device topology
- Work around a relocation handling error when compiling
the nVHE object with profile optimisation
Paolo Bonzini [Sat, 22 Oct 2022 07:32:23 +0000 (03:32 -0400)]
Merge tag 'kvmarm-fixes-6.1-1' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.1, take #1
- Fix for stage-2 invalidation holding the VM MMU lock
for too long by limiting the walk to the largest
block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
Linus Torvalds [Sat, 22 Oct 2022 01:26:00 +0000 (18:26 -0700)]
Merge tag 'thermal-6.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"This fixes the control CPU selection in the intel_powerclamp thermal
driver"
* tag 'thermal-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel_powerclamp: Use first online CPU as control_cpu
Linus Torvalds [Sat, 22 Oct 2022 01:19:42 +0000 (18:19 -0700)]
Merge tag 'pm-6.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some issues and clean up code in ARM cpufreq drivers.
Specifics:
- Fix module loading in the Tegra124 cpufreq driver (Jon Hunter)
- Fix memory leak and update to read-only region in the qcom cpufreq
driver (Fabien Parent)
- Miscellaneous minor cleanups to cpufreq drivers (Fabien Parent,
Yang Yingliang)"
* tag 'pm-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: sun50i: Switch to use dev_err_probe() helper
cpufreq: qcom-nvmem: Switch to use dev_err_probe() helper
cpufreq: imx6q: Switch to use dev_err_probe() helper
cpufreq: dt: Switch to use dev_err_probe() helper
cpufreq: qcom: remove unused parameter in function definition
cpufreq: qcom: fix writes in read-only memory region
cpufreq: qcom: fix memory leak in error path
cpufreq: tegra194: Fix module loading
Linus Torvalds [Sat, 22 Oct 2022 01:08:30 +0000 (18:08 -0700)]
Merge tag 'acpi-6.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced during this merge window (ACPI/PCI, device
enumeration and documentation) and some other ones found recently.
Specifics:
- Add missing device reference counting to acpi_get_pci_dev() after
changing it recently (Rafael Wysocki)
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy)
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby)
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra)
- Fix multiple error records handling in one of the ACPI extlog
driver code paths (Tony Luck)
- Prune DSDT override documentation from index after dropping it
(Bagas Sanjaya)"
* tag 'acpi-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Fix DMA range assignment
ACPI: PCI: Fix device reference counting in acpi_get_pci_dev()
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
ACPI: extlog: Handle multiple records
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
Documentation: ACPI: Prune DSDT override documentation from index
Linus Torvalds [Sat, 22 Oct 2022 01:02:36 +0000 (18:02 -0700)]
Merge tag 'efi-fixes-for-v6.1-1' of git://git./linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- fixes for the EFI variable store refactor that landed in v6.0
- fixes for issues that were introduced during the merge window
- back out some changes related to EFI zboot signing - we'll add a
better solution for this during the next cycle
* tag 'efi-fixes-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: runtime: Don't assume virtual mappings are missing if VA == PA == 0
efi: libstub: Fix incorrect payload size in zboot header
efi: libstub: Give efi_main() asmlinkage qualification
efi: efivars: Fix variable writes without query_variable_store()
efi: ssdt: Don't free memory if ACPI table was loaded successfully
efi: libstub: Remove zboot signing from build options
Linus Torvalds [Sat, 22 Oct 2022 00:47:39 +0000 (17:47 -0700)]
Merge tag 'iommu-fixes-v6.1-rc1' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Intel VT-d fixes:
- Fix a lockdep splat issue in intel_iommu_init()
- Allow NVS regions to pass RMRR check
- Domain cleanup in error path"
* tag 'iommu-fixes-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Clean up si_domain in the init_dmars() error path
iommu/vt-d: Allow NVS regions in arch_rmrr_sanity_check()
iommu/vt-d: Use rcu_lock in get_resv_regions
iommu: Add gfp parameter to iommu_alloc_resv_region
Linus Torvalds [Sat, 22 Oct 2022 00:41:57 +0000 (17:41 -0700)]
Merge tag 'for-linus-
2022102101' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- a 12 year old bug fix for the Apple Magic Trackpad v1 (José Expósito)
- a fix for a potential crash on removal of the Playstation controllers
(Roderick Colenbrander)
- a few new device IDs and device-specific quirks, most notably support
of the new Playstation DualSense Edge controller
* tag 'for-linus-
2022102101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Make array tp10ubkbd_led static const
HID: saitek: add madcatz variant of MMO7 mouse device ID
HID: playstation: support updated DualSense rumble mode.
HID: playstation: add initial DualSense Edge controller support
HID: playstation: stop DualSense output work on remove.
HID: magicmouse: Do not set BTN_MOUSE on double report
Linus Torvalds [Fri, 21 Oct 2022 23:01:53 +0000 (16:01 -0700)]
Merge tag '6.1-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- memory leak fixes
- fixes for directory leases, including an important one which fixes a
problem noticed by git functional tests
- fixes relating to missing free_xid calls (helpful for
tracing/debugging of entry/exit into cifs.ko)
- a multichannel fix
- a small cleanup fix (use of list_move instead of list_del/list_add)
* tag '6.1-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: fix memory leaks in session setup
cifs: drop the lease for cached directories on rmdir or rename
smb3: interface count displayed incorrectly
cifs: Fix memory leak when build ntlmssp negotiate blob failed
cifs: set rc to -ENOENT if we can not get a dentry for the cached dir
cifs: use LIST_HEAD() and list_move() to simplify code
cifs: Fix xid leak in cifs_get_file_info_unix()
cifs: Fix xid leak in cifs_ses_add_channel()
cifs: Fix xid leak in cifs_flock()
cifs: Fix xid leak in cifs_copy_file_range()
cifs: Fix xid leak in cifs_create()
Linus Torvalds [Fri, 21 Oct 2022 22:51:30 +0000 (15:51 -0700)]
Merge tag 'nfsd-6.1-2' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Fixes for patches merged in v6.1"
* tag 'nfsd-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: ensure we always call fh_verify_error tracepoint
NFSD: unregister shrinker when nfsd_init_net() fails
Chang S. Bae [Fri, 21 Oct 2022 18:58:44 +0000 (11:58 -0700)]
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
When an extended state component is not present in fpstate, but in init
state, the function copies from init_fpstate via copy_feature().
But, dynamic states are not present in init_fpstate because of all-zeros
init states. Then retrieving them from init_fpstate will explode like this:
BUG: kernel NULL pointer dereference, address:
0000000000000000
...
RIP: 0010:memcpy_erms+0x6/0x10
? __copy_xstate_to_uabi_buf+0x381/0x870
fpu_copy_guest_fpstate_to_uabi+0x28/0x80
kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm]
? __this_cpu_preempt_check+0x13/0x20
? vmx_vcpu_put+0x2e/0x260 [kvm_intel]
kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
? kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
? __fget_light+0xd4/0x130
__x64_sys_ioctl+0xe3/0x910
? debug_smp_processor_id+0x17/0x20
? fpregs_assert_state_consistent+0x27/0x50
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Adjust the 'mask' to zero out the userspace buffer for the features that
are not available both from fpstate and from init_fpstate.
The dynamic features depend on the compacted XSAVE format. Ensure it is
enabled before reading XCOMP_BV in init_fpstate.
Fixes:
2308ee57d93d ("x86/fpu/amx: Enable the AMX feature in 64-bit mode")
Reported-by: Yuan Yao <yuan.yao@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/lkml/BYAPR11MB3717EDEF2351C958F2C86EED95259@BYAPR11MB3717.namprd11.prod.outlook.com/
Link: https://lkml.kernel.org/r/20221021185844.13472-1-chang.seok.bae@intel.com
Linus Torvalds [Fri, 21 Oct 2022 22:19:43 +0000 (15:19 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small changes, one in the lpfc driver and the other in the core.
The core change is an additional footgun guard which prevents users
from writing the wrong state to sysfs and causing a hang"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Fix memory leak in lpfc_create_port()
scsi: core: Restrict legal sdev_state transitions via sysfs
Linus Torvalds [Fri, 21 Oct 2022 22:14:14 +0000 (15:14 -0700)]
Merge tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix nvme-hwmon for DMA non-cohehrent architectures (Serge Semin)
- add a nvme-hwmong maintainer (Christoph Hellwig)
- fix error pointer dereference in error handling (Dan Carpenter)
- fix invalid memory reference in nvmet_subsys_attr_qid_max_show
(Daniel Wagner)
- don't limit the DMA segment size in nvme-apple (Russell King)
- fix workqueue MEM_RECLAIM flushing dependency (Sagi Grimberg)
- disable write zeroes on various Kingston SSDs (Xander Li)
- fix a memory leak with block device tracing (Ye)
- flexible-array fix for ublk (Yushan)
- document the ublk recovery feature from this merge window
(ZiyangZhang)
- remove dead bfq variable in struct (Yuwei)
- error handling rq clearing fix (Yu)
- add an IRQ safety check for the cached bio freeing (Pavel)
- drbd bio cloning fix (Christoph)
* tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linux:
blktrace: remove unnessary stop block trace in 'blk_trace_shutdown'
blktrace: fix possible memleak in '__blk_trace_remove'
blktrace: introduce 'blk_trace_{start,stop}' helper
bio: safeguard REQ_ALLOC_CACHE bio put
block, bfq: remove unused variable for bfq_queue
drbd: only clone bio if we have a backing device
ublk_drv: use flexible-array member instead of zero-length array
nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_show
nvmet: fix workqueue MEM_RECLAIM flushing dependency
nvme-hwmon: kmalloc the NVME SMART log buffer
nvme-hwmon: consistently ignore errors from nvme_hwmon_init
nvme: add Guenther as nvme-hwmon maintainer
nvme-apple: don't limit DMA segement size
nvme-pci: disable write zeroes on various Kingston SSD
nvme: fix error pointer dereference in error handling
Documentation: document ublk user recovery feature
blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping()
Linus Torvalds [Fri, 21 Oct 2022 22:09:10 +0000 (15:09 -0700)]
Merge tag 'io_uring-6.1-2022-10-20' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix a potential memory leak in the error handling path of io-wq setup
(Rafael)
- Kill an errant debug statement that got added in this release (me)
- Fix an oops with an invalid direct descriptor with IORING_OP_MSG_RING
(Harshit)
- Remove unneeded FFS_SCM flagging (Pavel)
- Remove polling off the exit path (Pavel)
- Move out direct descriptor debug check to the cleanup path (Pavel)
- Use the proper helper rather than open-coding cached request get
(Pavel)
* tag 'io_uring-6.1-2022-10-20' of git://git.kernel.dk/linux:
io-wq: Fix memory leak in worker creation
io_uring/msg_ring: Fix NULL pointer dereference in io_msg_send_fd()
io_uring/rw: remove leftover debug statement
io_uring: don't iopoll from io_ring_ctx_wait_and_kill()
io_uring: reuse io_alloc_req()
io_uring: kill hot path fixed file bitmap debug checks
io_uring: remove FFS_SCM
Linus Torvalds [Fri, 21 Oct 2022 21:43:09 +0000 (14:43 -0700)]
Merge tag 'for-linus-6.1-rc2-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Just two fixes for the new 'virtio with grants' feature"
* tag 'for-linus-6.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/virtio: Convert PAGE_SIZE/PAGE_SHIFT/PFN_UP to Xen counterparts
xen/virtio: Handle cases when page offset > PAGE_SIZE properly
Linus Torvalds [Fri, 21 Oct 2022 21:33:36 +0000 (14:33 -0700)]
Merge tag 'selinux-pr-
20221020' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A small SELinux fix for a GFP_KERNEL allocation while a spinlock is
held.
The patch, while still fairly small, is a bit larger than one might
expect from a simple s/GFP_KERNEL/GFP_ATOMIC/ conversion because we
added support for the function to be called with different gfp flags
depending on the context, preserving GFP_KERNEL for those cases that
can safely sleep"
* tag 'selinux-pr-
20221020' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()
Linus Torvalds [Fri, 21 Oct 2022 19:33:03 +0000 (12:33 -0700)]
Merge tag 'mm-hotfixes-stable-2022-10-20' of git://git./linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morron:
"Seventeen hotfixes, mainly for MM.
Five are cc:stable and the remainder address post-6.0 issues"
* tag 'mm-hotfixes-stable-2022-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nouveau: fix migrate_to_ram() for faulting page
mm/huge_memory: do not clobber swp_entry_t during THP split
hugetlb: fix memory leak associated with vma_lock structure
mm/page_alloc: reduce potential fragmentation in make_alloc_exact()
mm: /proc/pid/smaps_rollup: fix maple tree search
mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages
mm/mmap: fix MAP_FIXED address return on VMA merge
mm/mmap.c: __vma_adjust(): suppress uninitialized var warning
mm/mmap: undo ->mmap() when mas_preallocate() fails
init: Kconfig: fix spelling mistake "satify" -> "satisfy"
ocfs2: clear dinode links count in case of error
ocfs2: fix BUG when iput after ocfs2_mknod fails
gcov: support GCC 12.1 and newer compilers
zsmalloc: zs_destroy_pool: add size_class NULL check
mm/mempolicy: fix mbind_range() arguments to vma_merge()
mailmap: update email for Qais Yousef
mailmap: update Dan Carpenter's email address
Linus Torvalds [Fri, 21 Oct 2022 19:29:52 +0000 (12:29 -0700)]
Merge tag 'trace-tools-6.1-rc1' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing tool update from Steven Rostedt:
- Make dot2c generate monitor's automata definition static
* tag 'trace-tools-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv/dot2c: Make automaton definition static
Linus Torvalds [Fri, 21 Oct 2022 19:25:39 +0000 (12:25 -0700)]
Merge tag 'linux-watchdog-6.1-rc2' of git://linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add tracing events for the most common watchdog events
* tag 'linux-watchdog-6.1-rc2' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add tracing events for the most usual watchdog events
Rafael J. Wysocki [Fri, 21 Oct 2022 18:07:41 +0000 (20:07 +0200)]
Merge branches 'acpi-scan', 'acpi-resource', 'acpi-apei', 'acpi-extlog' and 'acpi-docs'
Merge assorted ACPI fixes for 6.1-rc2:
- Fix resource list walk in acpi_dma_get_range() (Robin Murphy).
- Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
override warning message (Jiri Slaby).
- Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra).
- Fix multiple error records handling in one of the ACPI extlog driver
code paths (Tony Luck).
- Prune DSDT override documentation from index after dropping it (Bagas
Sanjaya).
* acpi-scan:
ACPI: scan: Fix DMA range assignment
* acpi-resource:
ACPI: resource: note more about IRQ override
ACPI: resource: do IRQ override on LENOVO IdeaPad
* acpi-apei:
ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
* acpi-extlog:
ACPI: extlog: Handle multiple records
* acpi-docs:
Documentation: ACPI: Prune DSDT override documentation from index
Douglas Anderson [Mon, 17 Oct 2022 19:18:51 +0000 (12:18 -0700)]
drm/bridge: ps8640: Add back the 50 ms mystery delay after HPD
Back in commit
826cff3f7ebb ("drm/bridge: parade-ps8640: Enable
runtime power management") we removed a mysterious 50 ms delay because
"Parade's support [couldn't] explain what the delay [was] for".
While I'm always a fan of removing mysterious delays, I suspect that
we need this mysterious delay to avoid some problems.
Specifically, what I found recently is that on sc7180-trogdor-homestar
sometimes the AUX backlight wasn't initializing properly. Some
debugging showed that the drm_dp_dpcd_read() function that the AUX
backlight driver was calling was returning bogus data about 1% of the
time when I booted up. This confused
drm_panel_dp_aux_backlight(). From continued debugging:
- If I retried the read then the read worked just fine.
- If I added a loop to perform the same read that
drm_panel_dp_aux_backlight() was doing 30 times at bootup I could
see that some percentage of the time the first read would give bogus
data but all 29 additional reads would always be fine.
- If I added a large delay _after_ powering on the panel but before
powering on PS8640 I could still reproduce the problem.
- If I added a delay after PS8640 powered on then I couldn't reproduce
the problem.
- I couldn't reproduce the problem on a board with the same panel but
the ti-sn65dsi86 bridge chip.
To me, the above indicated that there was a problem with PS8640 and
not the panel.
I don't really have any insight into what's going on in the MCU, but
my best guess is that when the MCU itself sees the HPD go high that it
does some AUX transfers itself and this is confusing things.
Let's go back and add back in the mysterious 50 ms delay. We only want
to do this the first time we see HPD go high after booting the MCU,
not every time we double-check HPD.
With this, the backlight initializes reliably on homestar.
Fixes:
826cff3f7ebb ("drm/bridge: parade-ps8640: Enable runtime power management")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017121813.1.I59700c745fbc31559a5d5c8e2a960279c751dbd5@changeid
Chen Zhongjin [Wed, 27 Jul 2022 03:15:06 +0000 (11:15 +0800)]
x86/unwind/orc: Fix unreliable stack dump with gcov
When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL
enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder,
causing the stack trace to show all text addresses as unreliable:
# echo l > /proc/sysrq-trigger
[ 477.521031] sysrq: Show backtrace of all active CPUs
[ 477.523813] NMI backtrace for cpu 0
[ 477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 #65
[ 477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
[ 477.526439] Call Trace:
[ 477.526854] <TASK>
[ 477.527216] ? dump_stack_lvl+0xc7/0x114
[ 477.527801] ? dump_stack+0x13/0x1f
[ 477.528331] ? nmi_cpu_backtrace.cold+0xb5/0x10d
[ 477.528998] ? lapic_can_unplug_cpu+0xa0/0xa0
[ 477.529641] ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0
[ 477.530393] ? arch_trigger_cpumask_backtrace+0x1d/0x30
[ 477.531136] ? sysrq_handle_showallcpus+0x1b/0x30
[ 477.531818] ? __handle_sysrq.cold+0x4e/0x1ae
[ 477.532451] ? write_sysrq_trigger+0x63/0x80
[ 477.533080] ? proc_reg_write+0x92/0x110
[ 477.533663] ? vfs_write+0x174/0x530
[ 477.534265] ? handle_mm_fault+0x16f/0x500
[ 477.534940] ? ksys_write+0x7b/0x170
[ 477.535543] ? __x64_sys_write+0x1d/0x30
[ 477.536191] ? do_syscall_64+0x6b/0x100
[ 477.536809] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 477.537609] </TASK>
This happens when the compiled code for show_stack() has a single word
on the stack, and doesn't use a tail call to show_stack_log_lvl().
(CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.) Then the
__unwind_start() skip logic hits an off-by-one bug and fails to unwind
all the way to the intended starting frame.
Fix it by reverting the following commit:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
The original justification for that commit no longer exists. That
original issue was later fixed in a different way, with the following
commit:
f2ac57a4c49d ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels")
Fixes:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
[jpoimboe: rewrite commit log]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Ard Biesheuvel [Thu, 20 Oct 2022 13:16:09 +0000 (15:16 +0200)]
efi: runtime: Don't assume virtual mappings are missing if VA == PA == 0
The generic EFI stub can be instructed to avoid SetVirtualAddressMap(),
and simply run with the firmware's 1:1 mapping. In this case, it
populates the virtual address fields of the runtime regions in the
memory map with the physical address of each region, so that the mapping
code has to be none the wiser. Only if SetVirtualAddressMap() fails, the
virtual addresses are wiped and the kernel code knows that the regions
cannot be mapped.
However, wiping amounts to setting it to zero, and if a runtime region
happens to live at physical address 0, its valid 1:1 mapped virtual
address could be mistaken for a wiped field, resulting on loss of access
to the EFI services at runtime.
So let's only assume that VA == 0 means 'no runtime services' if the
region in question does not live at PA 0x0.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Thu, 20 Oct 2022 09:26:42 +0000 (11:26 +0200)]
efi: libstub: Fix incorrect payload size in zboot header
The linker script symbol definition that captures the size of the
compressed payload inside the zboot decompressor (which is exposed via
the image header) refers to '.' for the end of the region, which does
not give the correct result as the expression is not placed at the end
of the payload. So use the symbol name explicitly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Fri, 14 Oct 2022 17:29:57 +0000 (19:29 +0200)]
efi: libstub: Give efi_main() asmlinkage qualification
To stop the bots from sending sparse warnings to me and the list about
efi_main() not having a prototype, decorate it with asmlinkage so that
it is clear that it is called from assembly, and therefore needs to
remain external, even if it is never declared in a header file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Wed, 19 Oct 2022 21:29:58 +0000 (23:29 +0200)]
efi: efivars: Fix variable writes without query_variable_store()
Commit
bbc6d2c6ef22 ("efi: vars: Switch to new wrapper layer")
refactored the efivars layer so that the 'business logic' related to
which UEFI variables affect the boot flow in which way could be moved
out of it, and into the efivarfs driver.
This inadvertently broke setting variables on firmware implementations
that lack the QueryVariableInfo() boot service, because we no longer
tolerate a EFI_UNSUPPORTED result from check_var_size() when calling
efivar_entry_set_get_size(), which now ends up calling check_var_size()
a second time inadvertently.
If QueryVariableInfo() is missing, we support writes of up to 64k -
let's move that logic into check_var_size(), and drop the redundant
call.
Cc: <stable@vger.kernel.org> # v6.0
Fixes:
bbc6d2c6ef22 ("efi: vars: Switch to new wrapper layer")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Fri, 14 Oct 2022 10:25:52 +0000 (12:25 +0200)]
efi: ssdt: Don't free memory if ACPI table was loaded successfully
Amadeusz reports KASAN use-after-free errors introduced by commit
3881ee0b1edc ("efi: avoid efivars layer when loading SSDTs from
variables"). The problem appears to be that the memory that holds the
new ACPI table is now freed unconditionally, instead of only when the
ACPI core reported a failure to load the table.
So let's fix this, by omitting the kfree() on success.
Cc: <stable@vger.kernel.org> # v6.0
Link: https://lore.kernel.org/all/a101a10a-4fbb-5fae-2e3c-76cf96ed8fbd@linux.intel.com/
Fixes:
3881ee0b1edc ("efi: avoid efivars layer when loading SSDTs from variables")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Mon, 17 Oct 2022 10:48:46 +0000 (12:48 +0200)]
efi: libstub: Remove zboot signing from build options
The zboot decompressor series introduced a feature to sign the PE/COFF
kernel image for secure boot as part of the kernel build. This was
necessary because there are actually two images that need to be signed:
the kernel with the EFI stub attached, and the decompressor application.
This is a bit of a burden, because it means that the images must be
signed on the the same system that performs the build, and this is not
realistic for distros.
During the next cycle, we will introduce changes to the zboot code so
that the inner image no longer needs to be signed. This means that the
outer PE/COFF image can be handled as usual, and be signed later in the
release process.
Let's remove the associated Kconfig options now so that they don't end
up in a LTS release while already being deprecated.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Jerry Snitselaar [Wed, 19 Oct 2022 00:44:47 +0000 (08:44 +0800)]
iommu/vt-d: Clean up si_domain in the init_dmars() error path
A splat from kmem_cache_destroy() was seen with a kernel prior to
commit
ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool")
when there was a failure in init_dmars(), because the iommu_domain
cache still had objects. While the mempool code is now gone, there
still is a leak of the si_domain memory if init_dmars() fails. So
clean up si_domain in the init_dmars() error path.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes:
86080ccc223a ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221010144842.308890-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Charlotte Tan [Wed, 19 Oct 2022 00:44:46 +0000 (08:44 +0800)]
iommu/vt-d: Allow NVS regions in arch_rmrr_sanity_check()
arch_rmrr_sanity_check() warns if the RMRR is not covered by an ACPI
Reserved region, but it seems like it should accept an NVS region as
well. The ACPI spec
https://uefi.org/specs/ACPI/6.5/15_System_Address_Map_Interfaces.html
uses similar wording for "Reserved" and "NVS" region types; for NVS
regions it says "This range of addresses is in use or reserved by the
system and must not be used by the operating system."
There is an old comment on this mailing list that also suggests NVS
regions should pass the arch_rmrr_sanity_check() test:
The warnings come from arch_rmrr_sanity_check() since it checks whether
the region is E820_TYPE_RESERVED. However, if the purpose of the check
is to detect RMRR has regions that may be used by OS as free memory,
isn't E820_TYPE_NVS safe, too?
This patch overlaps with another proposed patch that would add the region
type to the log since sometimes the bug reporter sees this log on the
console but doesn't know to include the kernel log:
https://lore.kernel.org/lkml/
20220611204859.234975-3-atomlin@redhat.com/
Here's an example of the "Firmware Bug" apparent false positive (wrapped
for line length):
DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR
[0x000000006f760000-0x000000006f762fff], contact BIOS vendor for
fixes
DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR
[0x000000006f760000-0x000000006f762fff]
This is the snippet from the e820 table:
BIOS-e820: [mem 0x0000000068bff000-0x000000006ebfefff] reserved
BIOS-e820: [mem 0x000000006ebff000-0x000000006f9fefff] ACPI NVS
BIOS-e820: [mem 0x000000006f9ff000-0x000000006fffefff] ACPI data
Fixes:
f036c7fa0ab6 ("iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved")
Cc: Will Mortensen <will@extrahop.com>
Link: https://lore.kernel.org/linux-iommu/64a5843d-850d-e58c-4fc2-0a0eeeb656dc@nec.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216443
Signed-off-by: Charlotte Tan <charlotte@extrahop.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Link: https://lore.kernel.org/r/20220929044449.32515-1-charlotte@extrahop.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lu Baolu [Wed, 19 Oct 2022 00:44:45 +0000 (08:44 +0800)]
iommu/vt-d: Use rcu_lock in get_resv_regions
Commit
5f64ce5411b46 ("iommu/vt-d: Duplicate iommu_resv_region objects
per device list") converted rcu_lock in get_resv_regions to
dmar_global_lock to allow sleeping in iommu_alloc_resv_region(). This
introduced possible recursive locking if get_resv_regions is called from
within a section where intel_iommu_init() already holds dmar_global_lock.
Especially, after commit
57365a04c921 ("iommu: Move bus setup to IOMMU
device registration"), below lockdep splats could always be seen.
============================================
WARNING: possible recursive locking detected
6.0.0-rc4+ #325 Tainted: G I
--------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffffa8a18c90 (dmar_global_lock){++++}-{3:3}, at:
intel_iommu_get_resv_regions+0x25/0x270
but task is already holding lock:
ffffffffa8a18c90 (dmar_global_lock){++++}-{3:3}, at:
intel_iommu_init+0x36d/0x6ea
...
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x5f
__lock_acquire.cold.73+0xad/0x2bb
lock_acquire+0xc2/0x2e0
? intel_iommu_get_resv_regions+0x25/0x270
? lock_is_held_type+0x9d/0x110
down_read+0x42/0x150
? intel_iommu_get_resv_regions+0x25/0x270
intel_iommu_get_resv_regions+0x25/0x270
iommu_create_device_direct_mappings.isra.28+0x8d/0x1c0
? iommu_get_dma_cookie+0x6d/0x90
bus_iommu_probe+0x19f/0x2e0
iommu_device_register+0xd4/0x130
intel_iommu_init+0x3e1/0x6ea
? iommu_setup+0x289/0x289
? rdinit_setup+0x34/0x34
pci_iommu_init+0x12/0x3a
do_one_initcall+0x65/0x320
? rdinit_setup+0x34/0x34
? rcu_read_lock_sched_held+0x5a/0x80
kernel_init_freeable+0x28a/0x2f3
? rest_init+0x1b0/0x1b0
kernel_init+0x1a/0x130
ret_from_fork+0x1f/0x30
</TASK>
This rolls back dmar_global_lock to rcu_lock in get_resv_regions to avoid
the lockdep splat.
Fixes:
57365a04c921 ("iommu: Move bus setup to IOMMU device registration")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lu Baolu [Wed, 19 Oct 2022 00:44:44 +0000 (08:44 +0800)]
iommu: Add gfp parameter to iommu_alloc_resv_region
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify
the memory allocation behavior. Thus iommu_alloc_resv_region() could also
be available in critical contexts.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Anup Patel [Fri, 21 Oct 2022 06:22:45 +0000 (11:52 +0530)]
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
The kvm_riscv_vcpu_timer_pending() checks per-VCPU next_cycles
and per-VCPU software injected VS timer interrupt. This function
returns incorrect value when Sstc is available because the per-VCPU
next_cycles are only updated by kvm_riscv_vcpu_timer_save() called
from kvm_arch_vcpu_put(). As a result, when Sstc is available the
VCPU does not block properly upon WFI traps.
To fix the above issue, we introduce kvm_riscv_vcpu_timer_sync()
which will update per-VCPU next_cycles upon every VM exit instead
of kvm_riscv_vcpu_timer_save().
Fixes:
8f5cb44b1bae ("RISC-V: KVM: Support sstc extension")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Andrew Jones [Fri, 21 Oct 2022 06:22:39 +0000 (11:52 +0530)]
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
riscv_cbom_block_size and riscv_init_cbom_blocksize() should always
be available and riscv_init_cbom_blocksize() should always be
invoked, even when compiling without RISCV_ISA_ZICBOM enabled. This
is because disabling RISCV_ISA_ZICBOM means "don't use zicbom
instructions in the kernel" not "pretend there isn't zicbom, even
when there is". When zicbom is available, whether the kernel enables
its use with RISCV_ISA_ZICBOM or not, KVM will offer it to guests.
Ensure we can build KVM and that the block size is initialized even
when compiling without RISCV_ISA_ZICBOM.
Fixes:
8f7e001e0325 ("RISC-V: Clean up the Zicbom block size probing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
Adam Borowski [Mon, 10 Oct 2022 18:33:51 +0000 (20:33 +0200)]
i2c: mlxbf: depend on ACPI; clean away ifdeffage
This fixes maybe_unused warnings/errors.
According to a comment during device tree removal, only ACPI is supported,
thus let's actually require it.
Fixes:
be18c5ede25d ("i2c: mlxbf: remove device tree support")
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Alistair Popple [Wed, 19 Oct 2022 12:29:34 +0000 (23:29 +1100)]
nouveau: fix migrate_to_ram() for faulting page
Commit
16ce101db85d ("mm/memory.c: fix race when faulting a device private
page") changed the migrate_to_ram() callback to take a reference on the
device page to ensure it can't be freed while handling the fault.
Unfortunately the corresponding update to Nouveau to accommodate this
change was inadvertently dropped from that patch causing GPU to CPU
migration to fail so add it here.
Link: https://lkml.kernel.org/r/20221019122934.866205-1-apopple@nvidia.com
Fixes:
16ce101db85d ("mm/memory.c: fix race when faulting a device private page")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Wed, 19 Oct 2022 13:41:56 +0000 (14:41 +0100)]
mm/huge_memory: do not clobber swp_entry_t during THP split
The following has been observed when running stressng mmap since commit
b653db77350c ("mm: Clear page->private when splitting or migrating a page")
watchdog: BUG: soft lockup - CPU#75 stuck for 26s! [stress-ng:9546]
CPU: 75 PID: 9546 Comm: stress-ng Tainted: G E 6.0.0-revert-
b653db77-fix+ #29
0357d79b60fb09775f678e4f3f64ef0579ad1374
Hardware name: SGI.COM C2112-4GP3/X10DRT-P-Series, BIOS 2.0a 05/09/2016
RIP: 0010:xas_descend+0x28/0x80
Code: cc cc 0f b6 0e 48 8b 57 08 48 d3 ea 83 e2 3f 89 d0 48 83 c0 04 48 8b 44 c6 08 48 89 77 18 48 89 c1 83 e1 03 48 83 f9 02 75 08 <48> 3d fd 00 00 00 76 08 88 57 12 c3 cc cc cc cc 48 c1 e8 02 89 c2
RSP: 0018:
ffffbbf02a2236a8 EFLAGS:
00000246
RAX:
ffff9cab7d6a0002 RBX:
ffffe04b0af88040 RCX:
0000000000000002
RDX:
0000000000000030 RSI:
ffff9cab60509b60 RDI:
ffffbbf02a2236c0
RBP:
0000000000000000 R08:
ffff9cab60509b60 R09:
ffffbbf02a2236c0
R10:
0000000000000001 R11:
ffffbbf02a223698 R12:
0000000000000000
R13:
ffff9cab4e28da80 R14:
0000000000039c01 R15:
ffff9cab4e28da88
FS:
00007fab89b85e40(0000) GS:
ffff9cea3fcc0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fab84e00000 CR3:
00000040b73a4003 CR4:
00000000003706e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
xas_load+0x3a/0x50
__filemap_get_folio+0x80/0x370
? put_swap_page+0x163/0x360
pagecache_get_page+0x13/0x90
__try_to_reclaim_swap+0x50/0x190
scan_swap_map_slots+0x31e/0x670
get_swap_pages+0x226/0x3c0
folio_alloc_swap+0x1cc/0x240
add_to_swap+0x14/0x70
shrink_page_list+0x968/0xbc0
reclaim_page_list+0x70/0xf0
reclaim_pages+0xdd/0x120
madvise_cold_or_pageout_pte_range+0x814/0xf30
walk_pgd_range+0x637/0xa30
__walk_page_range+0x142/0x170
walk_page_range+0x146/0x170
madvise_pageout+0xb7/0x280
? asm_common_interrupt+0x22/0x40
madvise_vma_behavior+0x3b7/0xac0
? find_vma+0x4a/0x70
? find_vma+0x64/0x70
? madvise_vma_anon_name+0x40/0x40
madvise_walk_vmas+0xa6/0x130
do_madvise+0x2f4/0x360
__x64_sys_madvise+0x26/0x30
do_syscall_64+0x5b/0x80
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
? do_syscall_64+0x67/0x80
? common_interrupt+0x8b/0xa0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The problem can be reproduced with the mmtests config
config-workload-stressng-mmap. It does not always happen and when it
triggers is variable but it has happened on multiple machines.
The intent of commit
b653db77350c patch was to avoid the case where
PG_private is clear but folio->private is not-NULL. However, THP tail
pages uses page->private for "swp_entry_t if folio_test_swapcache()" as
stated in the documentation for struct folio. This patch only clobbers
page->private for tail pages if the head page was not in swapcache and
warns once if page->private had an unexpected value.
Link: https://lkml.kernel.org/r/20221019134156.zjyyn5aownakvztf@techsingularity.net
Fixes:
b653db77350c ("mm: Clear page->private when splitting or migrating a page")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mike Kravetz [Wed, 19 Oct 2022 20:19:57 +0000 (13:19 -0700)]
hugetlb: fix memory leak associated with vma_lock structure
The hugetlb vma_lock structure hangs off the vm_private_data pointer of
sharable hugetlb vmas. The structure is vma specific and can not be
shared between vmas. At fork and various other times, vmas are duplicated
via vm_area_dup(). When this happens, the pointer in the newly created
vma must be cleared and the structure reallocated. Two hugetlb specific
routines deal with this hugetlb_dup_vma_private and hugetlb_vm_op_open.
Both routines are called for newly created vmas. hugetlb_dup_vma_private
would always clear the pointer and hugetlb_vm_op_open would allocate the
new vms_lock structure. This did not work in the case of this calling
sequence pointed out in [1].
move_vma
copy_vma
new_vma = vm_area_dup(vma);
new_vma->vm_ops->open(new_vma); --> new_vma has its own vma lock.
is_vm_hugetlb_page(vma)
clear_vma_resv_huge_pages
hugetlb_dup_vma_private --> vma->vm_private_data is set to NULL
When clearing hugetlb_dup_vma_private we actually leak the associated
vma_lock structure.
The vma_lock structure contains a pointer to the associated vma. This
information can be used in hugetlb_dup_vma_private and hugetlb_vm_op_open
to ensure we only clear the vm_private_data of newly created (copied)
vmas. In such cases, the vma->vma_lock->vma field will not point to the
vma.
Update hugetlb_dup_vma_private and hugetlb_vm_op_open to not clear
vm_private_data if vma->vma_lock->vma == vma. Also, log a warning if
hugetlb_vm_op_open ever encounters the case where vma_lock has already
been correctly allocated for the vma.
[1] https://lore.kernel.org/linux-mm/
5154292a-4c55-28cd-0935-
82441e512fc3@huawei.com/
Link: https://lkml.kernel.org/r/20221019201957.34607-1-mike.kravetz@oracle.com
Fixes:
131a79b474e9 ("hugetlb: fix vma lock handling during split vma and range unmapping")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: James Houghton <jthoughton@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam R. Howlett [Tue, 31 May 2022 13:20:51 +0000 (09:20 -0400)]
mm/page_alloc: reduce potential fragmentation in make_alloc_exact()
Try to avoid using the left over split page on the next request for a page
by calling __free_pages_ok() with FPI_TO_TAIL. This increases the
potential of defragmenting memory when it's used for a short period of
time.
Link: https://lkml.kernel.org/r/20220531185626.yvlmymbxyoe5vags@revolver
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugh Dickins [Wed, 19 Oct 2022 03:18:38 +0000 (20:18 -0700)]
mm: /proc/pid/smaps_rollup: fix maple tree search
/proc/pid/smaps_rollup showed 0 kB for everything: now find first vma.
Link: https://lkml.kernel.org/r/3011bee7-182-97a2-1083-d5f5b688e54b@google.com
Fixes:
c4c84f06285e ("fs/proc/task_mmu: stop using linked list and highest_vm_end")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rik van Riel [Tue, 18 Oct 2022 00:25:05 +0000 (20:25 -0400)]
mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages
The h->*_huge_pages counters are protected by the hugetlb_lock, but
alloc_huge_page has a corner case where it can decrement the counter
outside of the lock.
This could lead to a corrupted value of h->resv_huge_pages, which we have
observed on our systems.
Take the hugetlb_lock before decrementing h->resv_huge_pages to avoid a
potential race.
Link: https://lkml.kernel.org/r/20221017202505.0e6a4fcd@imladris.surriel.com
Fixes:
a88c76954804 ("mm: hugetlb: fix hugepage memory leak caused by wrong reserve count")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Glen McCready <gkmccready@meta.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / platform / kernel / linux-starfive.git / log