Suzuki K Poulose [Mon, 18 May 2020 18:02:31 +0000 (12:02 -0600)]
coresight: Fix support for sparsely populated ports
On some systems the firmware may not describe all the ports
connected to a component (e.g, for security reasons). This
could be especially problematic for "funnels" where we could
end up in modifying memory beyond the allocated space for
refcounts.
e.g, for a funnel with input ports listed 0, 3, 5, nr_inport = 3.
However the we could access refcnts[5] while checking for
references, like :
[ 526.110401] ==================================================================
[ 526.117988] BUG: KASAN: slab-out-of-bounds in funnel_enable+0x54/0x1b0
[ 526.124706] Read of size 4 at addr
ffffff8135f9549c by task bash/1114
[ 526.131324]
[ 526.132886] CPU: 3 PID: 1114 Comm: bash Tainted: G S 5.4.25 #232
[ 526.140397] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
[ 526.147113] Call trace:
[ 526.149653] dump_backtrace+0x0/0x188
[ 526.153431] show_stack+0x20/0x2c
[ 526.156852] dump_stack+0xdc/0x144
[ 526.160370] print_address_description+0x3c/0x494
[ 526.165211] __kasan_report+0x144/0x168
[ 526.169170] kasan_report+0x10/0x18
[ 526.172769] check_memory_region+0x1a4/0x1b4
[ 526.177164] __kasan_check_read+0x18/0x24
[ 526.181292] funnel_enable+0x54/0x1b0
[ 526.185072] coresight_enable_path+0x104/0x198
[ 526.189649] coresight_enable+0x118/0x26c
...
[ 526.237782] Allocated by task 280:
[ 526.241298] __kasan_kmalloc+0xf0/0x1ac
[ 526.245249] kasan_kmalloc+0xc/0x14
[ 526.248849] __kmalloc+0x28c/0x3b4
[ 526.252361] coresight_register+0x88/0x250
[ 526.256587] funnel_probe+0x15c/0x228
[ 526.260365] dynamic_funnel_probe+0x20/0x2c
[ 526.264679] amba_probe+0xbc/0x158
[ 526.268193] really_probe+0x144/0x408
[ 526.271970] driver_probe_device+0x70/0x140
...
[ 526.316810]
[ 526.318364] Freed by task 0:
[ 526.321344] (stack is not available)
[ 526.325024]
[ 526.326580] The buggy address belongs to the object at
ffffff8135f95480
[ 526.326580] which belongs to the cache kmalloc-128 of size 128
[ 526.339439] The buggy address is located 28 bytes inside of
[ 526.339439] 128-byte region [
ffffff8135f95480,
ffffff8135f95500)
[ 526.351399] The buggy address belongs to the page:
[ 526.356342] page:
ffffffff04b7e500 refcount:1 mapcount:0 mapping:
ffffff814b00c380 index:0x0 compound_mapcount: 0
[ 526.366711] flags: 0x4000000000010200(slab|head)
[ 526.371475] raw:
4000000000010200 ffffffff05034008 ffffffff0501eb08 ffffff814b00c380
[ 526.379435] raw:
0000000000000000 0000000000190019 00000001ffffffff 0000000000000000
[ 526.387393] page dumped because: kasan: bad access detected
[ 526.393128]
[ 526.394681] Memory state around the buggy address:
[ 526.399619]
ffffff8135f95380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.407046]
ffffff8135f95400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.414473] >
ffffff8135f95480: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.421900] ^
[ 526.426029]
ffffff8135f95500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.433456]
ffffff8135f95580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 526.440883] ==================================================================
To keep the code simple, we now track the maximum number of
possible input/output connections to/from this component
@ nr_inport and nr_outport in platform_data, respectively.
Thus the output connections could be sparse and code is
adjusted to skip the unspecified connections.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Yan [Mon, 18 May 2020 18:02:30 +0000 (12:02 -0600)]
coresight: etb10: Make coresight_etb_groups static
Fix the following sparse warning:
drivers/hwtracing/coresight/coresight-etb10.c:720:30: warning: symbol
'coresight_etb_groups' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Yan [Mon, 18 May 2020 18:02:29 +0000 (12:02 -0600)]
coresight: cti: Make some symbols static
Fix the following sparse warning:
drivers/hwtracing/coresight/coresight-cti.c:22:1: warning: symbol
'ect_net' was not declared. Should it be static?
drivers/hwtracing/coresight/coresight-cti.c:625:32: warning: symbol
'cti_ops_ect' was not declared. Should it be static?
drivers/hwtracing/coresight/coresight-cti.c:630:28: warning: symbol
'cti_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sai Prakash Ranjan [Mon, 18 May 2020 18:02:28 +0000 (12:02 -0600)]
coresight: etm4x: Replace ETM PIDs with UCI IDs for Kryo385
Replace the AMBA ETM PIDs with UCI IDs to avoid future
conflicts when adding the CTI support for QCOM Kryo385
CPU cores.
Fixes:
17b4add0d4e0 ("coresight: etm4x: Add ETM PIDs for SDM845 and MSM8996")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sai Prakash Ranjan [Mon, 18 May 2020 18:02:27 +0000 (12:02 -0600)]
coresight: etm4x: Add support for Qualcomm SC7180 SoC
Add ETM UCI IDs for Qualcomm SC7180 SoC. It has 2
big CPU cores based on Cortex-A76 and 6 LITTLE CPU
cores based on Cortex-A55.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Mon, 18 May 2020 18:02:26 +0000 (12:02 -0600)]
docs: trace: coresight-ect.rst: Fix a build warning
Sphinx wants a line after "..", as otherwise it complains with:
Documentation/trace/coresight/coresight-ect.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Leach [Mon, 18 May 2020 18:02:25 +0000 (12:02 -0600)]
coresight: docs: Add information about the topology representations
Update the CoreSight documents to describe the new connections directory
and the links between CoreSight devices in this directory.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Leach [Mon, 18 May 2020 18:02:24 +0000 (12:02 -0600)]
coresight: cti: Add in sysfs links to other coresight devices
Adds in sysfs links for connections where the connected device is another
coresight device. This allows examination of the coresight topology.
Non-coresight connections remain just as a reference name.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Mon, 18 May 2020 18:02:23 +0000 (12:02 -0600)]
coresight: Expose device connections via sysfs
Coresight device connections are a bit complicated and is not
exposed currently to the user. One has to look at the platform
descriptions (DT bindings or ACPI bindings) to make an understanding.
Given the new naming scheme, it will be helpful to have this information
to choose the appropriate devices for tracing. This patch exposes
the device connections via links in the sysfs directories.
e.g, for a connection devA[OutputPort_X] -> devB[InputPort_Y]
is represented as two symlinks:
/sys/bus/coresight/.../devA/out:X -> /sys/bus/coresight/.../devB
/sys/bus/coresight/.../devB/in:Y -> /sys/bus/coresight/.../devA
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Revised to use the generic sysfs links functions & link structures.
Provides a connections sysfs group in each device to hold the links.]
Co-developed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Leach [Mon, 18 May 2020 18:02:22 +0000 (12:02 -0600)]
coresight: Add generic sysfs link creation functions
To allow the connections between coresight components to be represented
in sysfs, generic methods for creating sysfs links between two coresight
devices are added.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Mon, 18 May 2020 18:02:21 +0000 (12:02 -0600)]
coresight: Add return value for fixup connections
Handle failures in fixing up connections for a newly registered
device. This will be useful to handle cases where we fail to expose
the links via sysfs for the connections.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Mon, 18 May 2020 18:02:20 +0000 (12:02 -0600)]
coresight: Pass coresight_device for coresight_release_platform_data
As we prepare to expose the links between the devices in
sysfs, pass the coresight_device instance to the
coresight_release_platform_data in order to free up the connections
when the device is removed.
No functional changes as such in this patch.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 19 May 2020 14:22:38 +0000 (16:22 +0200)]
Merge tag 'misc-habanalabs-next-2020-05-19' of git://people.freedesktop.org/~gabbayo/linux into char-misc-next
Oded writes:
This tag contains the following changes for kernel 5.8:
- GAUDI ASIC support. The tag contains code and header files needed to
initialize the GAUDI ASIC and run workloads on it. There are changes to
the common code that are needed for GAUDI and there is the addition of
new ASIC-dependent code of GAUDI.
- Add new feature of signal/wait command submissions. This is relevant to
GAUDI only and allows the user to sync between streams (queues) inside
the device.
- Allow user to retrieve the device time alongside the host time, to allow
a user application to synchronize device time together with host
time during profiling.
- Change ASIC's CPU initialization by loading its boot loader code from the
Host memory (instead of it being programmed on the on-board FLASH).
- Expose more attributes through HWMON.
- Move the ASIC event handling code to be "common code". This will be
shared between GAUDI and future ASICs. Goya will still use its own code.
- Fix bug in command submission parsing in Goya.
- Small fixes to security configuration (open up some registers for user
access).
- Improvements to ASIC reset code.
* tag 'misc-habanalabs-next-2020-05-19' of git://people.freedesktop.org/~gabbayo/linux: (38 commits)
habanalabs: update patched_cb_size for Wreg32
habanalabs: move event handling to common firmware file
habanalabs: enable gaudi code in driver
habanalabs: add gaudi profiler module
habanalabs: add gaudi security module
habanalabs: add hwmgr module for gaudi
habanalabs: add gaudi asic-dependent code
uapi: habanalabs: add gaudi defines
habanalabs: add gaudi asic registers header files
habanalabs: get card type, location from F/W
habanalabs: support clock gating enable/disable
habanalabs: set PM profile to auto only for goya
habanalabs: add dedicated define for hard reset
habanalabs: check if CoreSight is supported
habanalabs: add signal/wait to CS IOCTL operations
habanalabs: handle the h/w sync object
habanalabs: define ASIC-dependent interface for signal/wait
uapi: habanalabs: add signal/wait operations
habanalabs: add missing MODULE_DEVICE_TABLE
habanalabs: print all CB handles as hex numbers
...
Rachel Stahl [Sun, 17 May 2020 05:33:54 +0000 (08:33 +0300)]
habanalabs: update patched_cb_size for Wreg32
The patch_cb_size is not updated for Wreg32 in its validate function, so
updated in goya_validate_cb.
Signed-off-by: Rachel Stahl <rstahl@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Ofir Bitton [Sun, 10 May 2020 10:41:28 +0000 (13:41 +0300)]
habanalabs: move event handling to common firmware file
Instead of writing similar event handling code for each ASIC, move the code
to the common firmware file. This code will be used for GAUDI and all
future ASICs.
In addition, add two new fields to the auto-generated events file: valid
and description. This will save the need to manually write the events
description in the source code and simplify the code.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Mon, 11 May 2020 07:47:05 +0000 (10:47 +0300)]
habanalabs: enable gaudi code in driver
Enable the GAUDI ASIC code in the pci probe callback of the driver so the
driver will handle GAUDI ASICs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Mon, 11 May 2020 07:46:29 +0000 (10:46 +0300)]
habanalabs: add gaudi profiler module
Add the GAUDI code to initialize the ASIC's profiler. The profile receives
its initialization values from the user, same as in Goya, but the code to
initialize is in the driver because the configuration space of the
device is not directly exposed to the user.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Mon, 11 May 2020 07:45:12 +0000 (10:45 +0300)]
habanalabs: add gaudi security module
Add the code to initialize the security module of GAUDI. Similar to Goya,
we have two dedicated mechanisms for security: Range Registers and
Protection bits. Those mechanisms protect sensitive memory and
configuration areas inside the device.
In addition, in Gaudi we moved to a 3-level security scheme, where the F/W
runs with the highest security level (Privileged), the driver runs with a
less secured level (Secured) and the user is neither privileged nor
secured. The security module in the driver configures the Secured parts so
the user won't be able to access them. The Privileged parts are configured
by the F/W.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Mon, 11 May 2020 07:41:37 +0000 (10:41 +0300)]
habanalabs: add hwmgr module for gaudi
The hwmgr module is responsible for messages sent to GAUDI F/W that are
not common to all habanalabs ASICs.
In GAUDI, we provide the user a simplified mode of controlling the ASIC
clock frequency. Instead of three different clocks, we present a single
clock property that the user can configure via sysfs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Mon, 11 May 2020 07:29:27 +0000 (10:29 +0300)]
habanalabs: add gaudi asic-dependent code
Add the ASIC-dependent code for GAUDI. Supply (almost) all of the function
callbacks that the driver's common code need to initialize, finalize and
submit workloads to the GAUDI ASIC.
It also contains the code to initialize the F/W of the GAUDI ASIC and to
receive events from the F/W.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Mon, 11 May 2020 07:32:10 +0000 (10:32 +0300)]
uapi: habanalabs: add gaudi defines
Add the new defines for GAUDI uapi interface. It includes the queue IDs,
the engine IDs, SRAM reserved space and Sync Manager reserved resources.
There is no new IOCTL or additional operations in existing IOCTLs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Sun, 3 May 2020 14:33:40 +0000 (17:33 +0300)]
habanalabs: add gaudi asic registers header files
Add the relevant GAUDI ASIC registers header files. These files are
generated automatically from a tool maintained by the VLSI engineers.
There are more files which are not upstreamed because only very few defines
from those files are used in the driver. For those files, we copied the
relevant defines into gaudi_regs.h and gaudi_masks.h, to reduce the size of
this patch.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Sun, 3 May 2020 14:35:54 +0000 (17:35 +0300)]
habanalabs: get card type, location from F/W
For Gaudi the driver gets two new additional properties from the F/W:
1. The card's type - PCI or PMC
2. The card's location in the Gaudi's box (relevant only for PMC).
The card's location is also passed to the user in the HW IP info structure
as it needs this property for establishing communication between Gaudis.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Sat, 9 May 2020 09:17:21 +0000 (12:17 +0300)]
habanalabs: support clock gating enable/disable
In Gaudi there is a feature of clock gating certain engines.
Therefore, add this property to the device structure.
In addition, due to a limitation of this feature, the driver needs to
dynamically enable or disable this feature during run-time. Therefore, add
ASIC interface functions to enable/disable this function from the common
code.
Moreover, this feature must be turned off when the user wishes to debug the
ASIC by reading/writing registers and/or memory through the driver's
debugfs. Therefore, add an option to enable/disable clock gating via the
debugfs interface.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Sat, 9 May 2020 09:18:26 +0000 (12:18 +0300)]
habanalabs: set PM profile to auto only for goya
For Gaudi, the driver doesn't change the PM profile automatically due to
device-controlled PM capabilities. Therefore, set the PM profile to auto
only for Goya so the driver's code to automatically change the profile
won't run on Gaudi.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Sat, 9 May 2020 09:18:01 +0000 (12:18 +0300)]
habanalabs: add dedicated define for hard reset
Gaudi requires longer waiting during reset due to closing of network ports.
Add this explanation to the relevant comment in the code and add a
dedicated define for this reset timeout period, instead of multiplying
another define.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Sun, 10 May 2020 11:10:15 +0000 (14:10 +0300)]
habanalabs: check if CoreSight is supported
Coresight is not supported on simulator, therefore add a boolean for
checking that (currently used by un-upstreamed code).
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Thu, 7 May 2020 11:31:49 +0000 (14:31 +0300)]
habanalabs: add signal/wait to CS IOCTL operations
Add the following two operations to the CS IOCTL:
Signal:
The signal operation is basically a command submission, that is created by
the driver upon user request. It will be implemented using a dedicated PQE
that will increment a specific SOB. There will be a new flag:
HL_CS_FLAGS_SIGNAL. When the user set this flag in the CS IOCTL structure,
the driver will execute a dedicated code path that will prepare this
special PQE and submit it. The user only needs to provide a queue index on
which to put the signal.
Wait:
The wait operation is also a command submission that is created by the
driver upon user request. It will be implemented using a dedicated PQE that
will contain packets of "ARM a monitor" + FENCE packet. There will be a new
flag: HL_CS_FLAGS_WAIT. When the user set this flag in the CS structure,
the driver will execute a dedicated code path that will prepare this
special PQE and submit it.
The user needs to provide the following parameters:
1. queue ID
2. an array of signal_seq numbers and the number of signals to wait on
(the length of signal_seq_arr).
The IOCTL will return the CS sequence number of the wait it put on the
queue ID.
Currently, the code supports signal_seq_nr==1. But this API definition will
allow us to put a single PQE that waits on multiple signals.
To correctly configure the monitor and fence, the driver will need to
retrieve the specified signal CS object that contains the relevant SOB and
its expected value. In case the signal CS has already been completed, there
is no point of adding a wait operation. In this case, the driver will
return to the user *without* putting anything on the PQ. The return code
should reflect to the user that the signal was completed, as we won't
return a CS sequence number for this wait.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Thu, 7 May 2020 10:57:36 +0000 (13:57 +0300)]
habanalabs: handle the h/w sync object
Define a structure representing the h/w sync object (SOB).
a SOB can contain up to 2^15 values. Each signal CS will increment the SOB
by 1, so after some time we will reach the maximum number the SOB can
represent. When that happens, the driver needs to move to a different SOB
for the signal operation.
A SOB can be in 1 of 4 states:
1. Working state with value < 2^15
2. We reached a value of 2^15, but the signal operations weren't completed
yet OR there are pending waits on this signal. For the next submission, the
driver will move to another SOB.
3. ALL the signal operations on the SOB have finished AND there are no more
pending waits on the SOB AND we reached a value of 2^15 (This basically
means the refcnt of the SOB is 0 - see explanation below). When that
happens, the driver can clear the SOB by simply doing WREG32 0 to it and
set the refcnt back to 1.
4. The SOB is cleared and can be used next time by the driver when it needs
to reuse an SOB.
Per SOB, the driver will maintain a single refcnt, that will be initialized
to 1. When a signal or wait operation on this SOB is submitted to the PQ,
the refcnt will be incremented. When a signal or wait operation on this SOB
completes, the refcnt will be decremented. After the submission of the
signal operation that increments the SOB to a value of 2^15, the refcnt is
also decremented.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Thu, 7 May 2020 10:43:05 +0000 (13:43 +0300)]
habanalabs: define ASIC-dependent interface for signal/wait
This feature requires handling h/w resources which are a bit different from
one ASIC to the other. Therefore, we need to define a set of interfaces the
ASIC code provides to the common code to signal, wait, reset sync object
and to reset and init a queue.
As this feature is not supported in Goya, provide an empty implementation
of those functions.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Thu, 7 May 2020 10:41:16 +0000 (13:41 +0300)]
uapi: habanalabs: add signal/wait operations
This is a pre-requisite to upstreaming GAUDI support.
Signal/wait operations are done by the user to perform sync between two
Primary Queues (PQs). The sync is done using the sync manager and it is
usually resolved inside the device, but sometimes it can be resolved in the
host, i.e. the user should be able to wait in the host until a signal has
been completed.
The mechanism to define signal and wait operations is done by the driver
because it needs atomicity and serialization, which is already done in the
driver when submitting work to the different queues.
To implement this feature, the driver "takes" a couple of h/w resources,
and this is reflected by the defines added to the uapi file.
The signal/wait operations are done via the existing CS IOCTL, and they use
the same data structure. There is a difference in the meaning of some of
the parameters, and for that we added unions to make the code more
readable.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Sun, 3 May 2020 12:30:55 +0000 (15:30 +0300)]
habanalabs: add missing MODULE_DEVICE_TABLE
PCI drivers should use this define to declare their PCI ID table.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Dotan Barak [Tue, 28 Apr 2020 05:43:19 +0000 (08:43 +0300)]
habanalabs: print all CB handles as hex numbers
Make all the CB handles printed in the same way and not some as decimal and
some as hex numbers.
Signed-off-by: Dotan Barak <dbarak@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Wed, 22 Apr 2020 10:42:28 +0000 (13:42 +0300)]
habanalabs: update F/W register map
Update the mapping to the latest one used by the Firmware. No impact on the
driver in this update.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Adam Aharon [Wed, 22 Apr 2020 06:37:54 +0000 (09:37 +0300)]
habanalabs: enable trace data compression (profiler)
Set the STMTCSR.COMPEN bit to enable leading-zero trace data
compression functionality for the extended stimulus ports.
Signed-off-by: Adam Aharon <aaharon@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Ofir Bitton [Thu, 16 Apr 2020 10:47:15 +0000 (13:47 +0300)]
habanalabs: load CPU device boot loader from host
Load CPU device boot loader during driver boot time in order to avoid flash
write for every boot loader update.
To preserve backward-compatibility, skip the device boot load if the device
doesn't request it.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Fri, 17 Apr 2020 09:12:13 +0000 (12:12 +0300)]
habanalabs: leave space for 2xMSG_PROT in CB
The user must leave space for 2xMSG_PROT in the external CB, so adjust the
define of max size accordingly. The driver, however, can still create a CB
with the maximum size of 2MB. Therefore, we need to add a check
specifically for the user requested size.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Christine Gharzuzi [Thu, 16 Apr 2020 13:43:26 +0000 (16:43 +0300)]
habanalabs: support hwmon_reset_history attribute
Support hwmon_temp_reset_histroy, hwmon_in_reset_history and
hwmon_curr_reset attribute which resets the historical highest value.
Signed-off-by: Christine Gharzuzi <cgharzuzi@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Tomer Tayar [Wed, 1 Apr 2020 16:30:29 +0000 (19:30 +0300)]
habanalabs: Align protection bits configuration of all TPCs
Align the protection bits configuration of all TPC cores to be as of TPC
core 0.
Fixes:
a513f9a7eca5 ("habanalabs: make tpc registers secured")
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Tomer Tayar [Tue, 31 Mar 2020 17:00:30 +0000 (20:00 +0300)]
habanalabs: Allow access to TPC LFSR register
Allow user access to TPC LFSR register, as it might be accessed by TPC
kernels.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Tomer Tayar [Tue, 31 Mar 2020 19:46:36 +0000 (22:46 +0300)]
habanalabs: Add INFO IOCTL opcode for time sync information
Add a new opcode to the INFO IOCTL that retrieves the device time
alongside the host time, to allow a user application that want to measure
device time together with host time (such as a profiler) to synchronize
these times.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
kbuild test robot [Sun, 5 Apr 2020 16:01:31 +0000 (00:01 +0800)]
habanalabs: hl_pci_set_dma_mask() can be static
set function to be static as it is not called from outside its file.
Signed-off-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Tue, 31 Mar 2020 08:57:11 +0000 (11:57 +0300)]
habanalabs: handle barriers in DMA QMAN streams
When we have DMA QMAN with multiple streams, we need to know whether the
command buffer contains at least one DMA packet in order to configure the
barriers correctly when adding the 2xMSG_PROT at the end of the JOB. If
there is no DMA packet, then there is no need to put engine barrier. This
is relevant only for GAUDI as GOYA doesn't have streams so the engine can't
be busy by another stream.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Sun, 29 Mar 2020 10:18:30 +0000 (13:18 +0300)]
habanalabs: retrieve DMA mask indication from firmware
Retrieve from the firmware the DMA mask value we need to set according to
the device's PCI controller configuration. This is needed when working on
POWER9 machines, as the device's PCI controller is configured in a
different way in those machines.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Sat, 28 Mar 2020 09:00:07 +0000 (12:00 +0300)]
habanalabs: update firmware definitions
Add comments for the various errors and states of the firmware during boot.
Add a mapping of a new register that will tell the driver whether the
firmware executed the request from the driver or if it has encountered an
error.
Add a new enum for the possible values of this register.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Fri, 27 Mar 2020 13:38:37 +0000 (16:38 +0300)]
habanalabs: increase timeout during reset
When doing training, the DL framework (e.g. tensorflow) performs hundreds
of thousands of memory allocations and mappings. In case the driver needs
to perform hard-reset during training, the driver kills the application and
unmaps all those memory allocations. Unfortunately, because of that large
amount of mappings, the driver isn't able to do that in the current timeout
(5 seconds). Therefore, increase the timeout significantly to 30 seconds
to avoid situation where the driver resets the device with active mappings,
which sometime can cause a kernel bug.
BTW, it doesn't mean we will spend all the 30 seconds because the reset
thread checks every one second if the unmap operation is done.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Fri, 27 Mar 2020 13:32:33 +0000 (16:32 +0300)]
habanalabs: print warning when reset is requested
When the system administrator asks the driver to soft or hard reset the
device through sysfs, the driver should display a warning in the kernel log
to explain why it suddenly resets the device.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Thu, 26 Mar 2020 10:32:56 +0000 (12:32 +0200)]
habanalabs: unify and improve device cpu init
Move the code of device CPU initialization from being ASIC-Dependent to
common code. In addition, add support for the new error reporting feature
of the firmware boot code.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Sun, 1 Mar 2020 17:59:39 +0000 (19:59 +0200)]
habanalabs: re-factor H/W queues initialization
We want to remove the following restrictions/assumptions in our driver:
1. The H/W queue index is also the completion queue index.
2. The H/W queue index is also the IRQ number of the completion queue.
3. All queues of the same type have consecutive indexes.
Therefore we add the support for H/W queues of the same type with
nonconsecutive indexes and completion queue index and IRQ number different
than the H/W queue index.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Omer Shpigelman [Sun, 22 Mar 2020 19:12:51 +0000 (21:12 +0200)]
habanalabs: remove stop-on-error flag from DMA
Stop-on-error mode in DMA is useful as it stops the transaction
immediately upon error e.g. page fault.
But it may cause the next command submission to fail as is leaves the DMA
in unstable state.
Therefore we remove the stop-on-error configuration from the DMA.
Stop-on-err is still available for debug.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Tue, 24 Mar 2020 08:45:58 +0000 (10:45 +0200)]
habanalabs: don't wait for ASIC CPU after reset
Upon reset of the ASIC, the driver would have waited for the CPU to come
out of reset before finishing the reset process. This was done for the
purpose of making the CPU available to answer FLR requests. However, when a
VM shuts down, the driver isn't removed so a reset never happens.
Therefore, remove this waiting period as we don't need it.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Akira Shimahara [Mon, 11 May 2020 20:38:20 +0000 (22:38 +0200)]
w1_therm: adding bulk read support to trigger multiple conversion on bus
Adding bulk read support:
Sending a 'trigger' command in the dedicated sysfs entry of bus master
device send a conversion command for all the slaves on the bus. The sysfs
entry is added as soon as at least one device supporting this feature
is detected on the bus.
The behavior of the sysfs reading temperature on the device is as follow:
* If no bulk read pending, trigger a conversion on the device, wait for
the conversion to be done, read the temperature in device RAM
* If a bulk read has been trigger, access directly the device RAM
This behavior is the same on the 2 sysfs entries ('temperature' and
'w1_slave').
Reading the therm_bulk_read sysfs give the status of bulk operations:
* '-1': conversion in progress on at least 1 sensor
* '1': conversion complete but at least one sensor has not been read yet
* '0': no bulk operation. Reading temperature on ecah device will trigger
a conversion
As not all devices support bulk read feature, it has been added in device
family structure.
The attribute is set at master level as soon as a supporting device is
discover. It is removed when the last supported device leave the bus.
The count of supported device is kept with the static counter
bulk_read_device_counter.
A strong pull up is apply on the line if at least one device required it.
The duration of the pull up is the max time required by a device on the
line, which depends on the resolution settings of each device. The strong
pull up could be adjust with the a module parameter.
Updating documentation in Documentation/ABI/testing/sysfs-driver-w1_therm
and Documentation/w1/slaves/w1_therm.rst accordingly.
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203820.411483-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akira Shimahara [Mon, 11 May 2020 20:38:01 +0000 (22:38 +0200)]
w1_therm: adding alarm sysfs entry
Adding device alarms settings by a dedicated sysfs entry alarms (RW):
read or write TH and TL in the device RAM. Checking devices in alarm
state could be performed using the master search command.
As alarms temperature level are store in a 8 bit register on the device
and are signed values, a safe cast shall be performed using the min and
max temperature that device are able to measure. This is done by
int_to_short inline function.
A 'write_data' field is added in the device structure, to bind the
correct writing function, as some devices may have 2 or 3 bytes RAM.
Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203801.411253-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akira Shimahara [Mon, 11 May 2020 20:37:42 +0000 (22:37 +0200)]
w1_therm: optimizing temperature read timings
Optimizing temperature reading by reducing waiting conversion time
according to device resolution settings, as per device specification.
This is device dependent as not all the devices supports resolution
setting, so it has been added in device family structures.
The process to read the temperature on the device has been adapted in a
new function 'convert_t()', which replace the former 'read_therm()', is
introduce to deal with this timing. Strong pull up is also applied during
the required time, according to device power status needs and
'strong_pullup' module parameter.
'temperature_from_RAM()' function is introduced to get the correct
temperature computation (device dependent) from device RAM data.
An new sysfs entry has been added to ouptut only temperature. The old
entry w1_slave has been kept for compatibility, without changing its
output format.
Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203742.411039-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akira Shimahara [Mon, 11 May 2020 20:37:25 +0000 (22:37 +0200)]
w1_therm: adding eeprom sysfs entry
The driver implement 2 hardware functions to access device RAM:
* copy_scratchpad
* recall_scratchpad
They act according to device specifications.
As EEPROM operations are not device dependent (all w1_therm can perform
EEPROM read/write operation following the same protocol), it is removed
from device families structures.
Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203725.410844-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akira Shimahara [Mon, 11 May 2020 20:37:08 +0000 (22:37 +0200)]
w1_therm: adding resolution sysfs entry
Adding resolution sysfs entry (RW) to get or set the device resolution
Write values are managed as follow:
* '9..12': resolution to set in bit
* Anything else: do nothing
Read values are :
* '9..12': device resolution in bit
* '-xx': xx is kernel error when reading the resolution
Only supported devices will show the sysfs entry. A new family has been
created for DS18S20 devices as they do not implement resolution feature.
The resolution of each device is check when the device is
discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'.
The status is stored in the device structure w1_therm_family_data so
that the driver always knows the resolution of each device, which could
be used later to determine the required conversion duration (resolution
dependent).
The resolution is re evaluate each time a user read or write the sysfs
entry.
To avoid looping through the w1_therm_families at run time, the pointer
'specific_functions' is set up to the correct 'w1_therm_family_converter'
when the slave is added (which mean when it is discovered by the master).
This initialization is done by a helper function
'device_family(struct w1_slave *sl)', and a dedicated macro
'SLAVE_SPECIFIC_FUNC(sl)' allow the access to the specific function of the
slave device.
'read_scratchpad' and 'write_scratchpad' are the hardware functions to
access the device RAM, as per protocol specification.
It cancel the former 'precision' functions, which was only set and never
read (so not stored in the device struct).
Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203708.410649-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akira Shimahara [Mon, 11 May 2020 20:36:50 +0000 (22:36 +0200)]
w1_therm: adding ext_power sysfs entry
Adding ext_power sysfs entry (RO). Return the power status of the device:
- 0: device parasite powered
- 1: device externally powered
- xx: xx is kernel error
The power status of each device is check when the device is
discover by the bus master, in 'w1_therm_add_slave(struct w1_slave *)'.
The status is stored in the device structure w1_therm_family_data so
that the driver always knows the power state of each device, which could
be used later to determine the required strong pull up to apply on the
line.
The power status is re evaluate each time the sysfs ext_power read by
a user.
The hardware function 'read_powermode(struct w1_slave *sl)' act just as
per device specifications, sending W1_READ_PSUPPLY command on the bus,
and issue a read time slot, reading only one bit.
A helper function 'bool bus_mutex_lock(struct mutex *lock)' is introduced.
It try to aquire the bus mutex several times (W1_THERM_MAX_TRY), waiting
W1_THERM_RETRY_DELAY between two attempt.
Updating Documentation/ABI/testing/sysfs-driver-w1_therm accordingly.
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203650.410439-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akira Shimahara [Mon, 11 May 2020 20:36:31 +0000 (22:36 +0200)]
w1_therm: adding sysfs-driver-w1_therm doc
Adding a sysfs-driver-w1_therm documentation file in
Documentation/ABI/testing. It describe the onlys sysfs entry of w1_therm
module, based on Documentation/w1/slaves/w1_therm.rst
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203631.410227-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akira Shimahara [Mon, 11 May 2020 20:36:10 +0000 (22:36 +0200)]
w1_therm: fix reset_select_slave during discovery
Fix reset_select_slave issue during devices discovery by the master on
bus. The w1_reset_select_slave() from w1_io.c, which was previously used,
assume that if the slave count is 1 there is only one slave attached on
the bus. This is not always true. For example when discovering devices,
when the first device is discover by the bus master, its slave count is
1, but some other slaves may be on the bus.
In that case instead of adressing command to the attached slave the
master throw a SKIP ROM command so that all slaves attached on the bus
will answer simultenaously causing data collision.
A dedicated reset_select_slave() function is implemented here,
it always perform an adressing to each slave using the MATCH ROM
command.
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203610.409975-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akira Shimahara [Mon, 11 May 2020 20:35:35 +0000 (22:35 +0200)]
w1_therm: adding code comments and code reordering
Adding code comments to split code in dedicated parts. After the global
declarations (defines, macros and function declarations), code is organized
as follow :
- Device and family dependent structures and functions
- Interfaces functions
- Helpers functions
- Hardware functions
- Sysfs interface functions
Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
Link: https://lore.kernel.org/r/20200511203535.409599-1-akira215corp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Souptick Joarder [Tue, 5 May 2020 20:18:32 +0000 (01:48 +0530)]
VMCI: Avoid extra check for access_ok()
get_user_pages_fast() is already having a check for the same. This
double check can be removed.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lore.kernel.org/r/1588709912-8065-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tang Bin [Thu, 7 May 2020 11:12:24 +0000 (19:12 +0800)]
dca: Use PTR_ERR_OR_ZERO() to simplify code
The function PTR_ERR_OR_ZERO() contains the check of
IS_ERR() and the return of PTR_ERR() or zero.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200507111224.4176-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Angelo Dureghello [Thu, 7 May 2020 19:50:50 +0000 (21:50 +0200)]
w1: ds2430: fix eeprom size in driver description
Non functional fix, set Kb to b, to avoid any misundertanding.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Link: https://lore.kernel.org/r/20200507195050.472483-1-angelo.dureghello@timesys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Kandagatla [Tue, 12 May 2020 11:09:30 +0000 (12:09 +0100)]
misc: fastrpc: fix potential fastrpc_invoke_ctx leak
fastrpc_invoke_ctx can have refcount of 2 in error path where
rpmsg_send() fails to send invoke message. decrement the refcount
properly in the error path to fix this leak.
This also fixes below static checker warning:
drivers/misc/fastrpc.c:990 fastrpc_internal_invoke()
warn: 'ctx->refcount.refcount.ref.counter' not decremented on lines: 990.
Fixes:
c68cfb718c8f ("misc: fastrpc: Add support for context")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200512110930.2550-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Kandagatla [Mon, 11 May 2020 16:27:22 +0000 (17:27 +0100)]
misc: fastrpc: Fix an incomplete memory release in fastrpc_rpmsg_probe()
fastrpc_channel_ctx is not freed if misc_register() fails, this would
lead to a memory leak. Fix this leak by adding kfree in misc_register()
error path.
Fixes:
278d56f970ae ("misc: fastrpc: Reference count channel context")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200511162722.2552-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saravana Kannan [Mon, 11 May 2020 15:13:34 +0000 (16:13 +0100)]
slimbus: core: Fix mismatch in of_node_get/put
Adding missing corresponding of_node_put
Fixes:
7588a511bdb4 ("slimbus: core: add support to device tree helper")
Signed-off-by: Saravana Kannan <saravanak@google.com>
[Srini: added fixes tag, removed NULL check and updated log]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200511151334.362-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saravana Kannan [Mon, 11 May 2020 15:13:33 +0000 (16:13 +0100)]
slimbus: core: Set fwnode for a device when setting of_node
When setting the of_node for a newly created device, also set the
fwnode. This allows fw_devlink feature to work for slimbus devices.
Also, remove some unnecessary NULL checks. The functions in question
already do NULL checks.
Signed-off-by: Saravana Kannan <saravanak@google.com>
[Srini: removed unnecessary NULL check from other patch]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200511151334.362-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Zou [Mon, 11 May 2020 14:50:42 +0000 (15:50 +0100)]
nvmem: jz4780-efuse: Use PTR_ERR_OR_ZERO() to simplify code
Fixes coccicheck warning:
drivers/nvmem/jz4780-efuse.c:214:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200511145042.31223-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Auchter [Mon, 11 May 2020 14:50:41 +0000 (15:50 +0100)]
nvmem: ensure sysfs writes handle write-protect pin
Commit
2a127da461a9 ("nvmem: add support for the write-protect pin")
added support for handling write-protect pins to the nvmem core, and
Commit
1c89074bf850 ("eeprom: at24: remove the write-protect pin support")
retrofitted the at24 driver to use this support.
These changes broke write() on the nvmem sysfs attribute for eeproms
which utilize a write-protect pin, as the write callback invokes the
nvmem device's reg_write callback directly which no longer handles
changing the state of the write-protect pin.
Change the read and write callbacks for the sysfs attribute to invoke
nvmme_reg_read/nvmem_reg_write helpers which handle this, rather than
calling reg_read/reg_write directly.
Fixes:
2a127da461a9 ("nvmem: add support for the write-protect pin")
Signed-off-by: Michael Auchter <michael.auchter@ni.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200511145042.31223-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anson Huang [Mon, 11 May 2020 14:50:40 +0000 (15:50 +0100)]
nvmem: imx-ocotp: Improve logic to save many code lines
Several logic improvements to save many code lines:
- no need to use goto;
- no need to assign return value;
- combine different conditions of return value into one line.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200511145042.31223-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Sun, 10 May 2020 13:03:57 +0000 (15:03 +0200)]
firmware: xilinx: Fix an error handling path in 'zynqmp_firmware_probe()'
If 'mfd_add_devices()' fails, we must undo 'zynqmp_pm_api_debugfs_init()'
otherwise some debugfs directory and files will be left.
Just move the call to 'zynqmp_pm_api_debugfs_init()' a few lines below to
fix the issue.
Fixes:
e23d9c6d0d49 ("drivers: soc: xilinx: Add ZynqMP power domain driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/20200510130357.233364-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harshal Chaudhari [Sun, 10 May 2020 16:43:08 +0000 (22:13 +0530)]
misc: xilinx-sdfec: convert to module_platform_driver()
The driver init and exit function don't do anything besides registering
and unregistering the platform driver, so the module_platform_driver()
macro could just be used instead of having separate functions.
Signed-off-by: Harshal Chaudhari <harshalchau04@gmail.com>
Acked-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Link: https://lore.kernel.org/r/20200510164308.31358-1-harshalchau04@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuhong Yuan [Thu, 7 May 2020 15:13:43 +0000 (23:13 +0800)]
uio_hv_generic: add missed sysfs_remove_bin_file
This driver calls sysfs_create_bin_file() in probe, but forgets to
call sysfs_remove_bin_file() in remove.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20200507151343.792816-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 15 May 2020 14:09:24 +0000 (16:09 +0200)]
Merge tag 'fpga-for-5.8' of git://git./linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager changes for 5.8
Here's the first set of changes for the 5.8-rc1 merge window.
Dominic's change adds support for accessing AFU regions with gdb.
Gustavo's change is a cleanup patch regarding variable lenght arrays.
Richard's changes update dt-bindings and add support for stratix and agilex.
Sergiu's changes update spi transfers with the new delay field.
Xu's change addresses an issue with a wrong return value.
Shubhrajyoti's change makes the Zynq FPGA driver return -EPROBE_DEFER on
check of devm_clk_get failure.
Xu's change for DFL enables multiple opens.
All of these patches have been reviewed, have appropriate Acked-by's and
have been in the last few linux-next releases without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: afu: support debug access to memory-mapped afu regions
fpga: dfl.h: Replace zero-length array with flexible-array member
arm64: dts: agilex: correct service layer driver's compatible value
dt-bindings, firmware: add compatible value Intel Stratix10 service layer binding
fpga: stratix10-soc: add compatible property value for intel agilex
arm64: dts: agilex: correct FPGA manager driver's compatible value
dt-bindings: fpga: add compatible value to Stratix10 SoC FPGA manager binding
fpga: machxo2-spi: Use new structure for SPI transfer delays
fpga: ice40-spi: Use new structure for SPI transfer delays
fpga: dfl: support multiple opens on feature device node.
Gustavo A. R. Silva [Thu, 7 May 2020 18:53:18 +0000 (13:53 -0500)]
greybus: Replace zero-length array with flexible-array
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507185318.GA14393@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 11 May 2020 07:17:15 +0000 (09:17 +0200)]
Merge 5.7-rc5 into char-misc-next
We want the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 10 May 2020 22:16:58 +0000 (15:16 -0700)]
Linux 5.7-rc5
Linus Torvalds [Sun, 10 May 2020 18:59:53 +0000 (11:59 -0700)]
Merge tag 'x86-urgent-2020-05-10' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Ensure that direct mapping alias is always flushed when changing
page attributes. The optimization for small ranges failed to do so
when the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it
is guaranteed to only be called once during boot and cannot be
rearmed by clearing warn_once after boot. If it's invoked post boot
then lockdep rightfully complains about a potential deadlock as the
calling context is different.
- A series of fixes for objtool and the ORC unwinder addressing
variety of small issues:
- Stack offset tracking for indirect CFAs in objtool ignored
subsequent pushs and pops
- Repair the unwind hints in the register clearing entry ASM code
- Make the unwinding in the low level exit to usermode code stop
after switching to the trampoline stack. The unwind hint is no
longer valid and the ORC unwinder emits a warning as it can't
find the registers anymore.
- Fix unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
- Prevent unwinder warnings when dumping the stack of a
non-current task as there is no way to be sure about the
validity because the dumped stack can be a moving target.
- Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip
the first frame.
- Prevent ORC unwinding before ORC data has been initialized
- Immediately terminate unwinding when a unknown ORC entry type
is found.
- Prevent premature stop of the unwinder caused by IRET frames.
- Fix another infinite loop in objtool caused by a negative
offset which was not catched.
- Address a few build warnings in the ORC unwinder and add
missing static/ro_after_init annotations"
* tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES
x86/apic: Move TSC deadline timer debug printk
ftrace/x86: Fix trace event registration for syscalls without arguments
x86/mm/cpa: Flush direct map alias during cpa
objtool: Fix infinite loop in for_offset_range()
x86/unwind/orc: Fix premature unwind stoppage due to IRET frames
x86/unwind/orc: Fix error path for bad ORC entry type
x86/unwind/orc: Prevent unwinding before ORC initialization
x86/unwind/orc: Don't skip the first frame for inactive tasks
x86/unwind: Prevent false warnings for non-current tasks
x86/unwind/orc: Convert global variables to static
x86/entry/64: Fix unwind hints in rewind_stack_do_exit()
x86/entry/64: Fix unwind hints in __switch_to_asm()
x86/entry/64: Fix unwind hints in kernel exit path
x86/entry/64: Fix unwind hints in register clearing code
objtool: Fix stack offset tracking for indirect CFAs
Linus Torvalds [Sun, 10 May 2020 18:42:14 +0000 (11:42 -0700)]
Merge tag 'objtool-urgent-2020-05-10' of git://git./linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single fix for objtool to prevent an infinite loop in the
jump table search which can be triggered when building the
kernel with '-ffunction-sections'"
* tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix infinite loop in find_jump_table()
Linus Torvalds [Sun, 10 May 2020 18:39:31 +0000 (11:39 -0700)]
Merge tag 'locking-urgent-2020-05-10' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix for the fallout of the recent futex uacess rework.
With those changes GCC9 fails to analyze arch_futex_atomic_op_inuser()
correctly and emits a 'maybe unitialized' warning. While we usually
ignore compiler stupidity the conditional store is pointless anyway
because the correct case has to store. For the fault case the extra
store does no harm"
* tag 'locking-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ARM: futex: Address build warning
Linus Torvalds [Sun, 10 May 2020 18:26:23 +0000 (11:26 -0700)]
Merge tag 'iommu-fixes-v5.7-rc4' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Race condition fixes for the AMD IOMMU driver.
These are five patches fixing two race conditions around
increase_address_space(). The first race condition was around the
non-atomic update of the domain page-table root pointer and the
variable containing the page-table depth (called mode). This is fixed
now be merging page-table root and mode into one 64-bit field which
is read/written atomically.
The second race condition was around updating the page-table root
pointer and making it public before the hardware caches were flushed.
This could cause addresses to be mapped and returned to drivers which
are not reachable by IOMMU hardware yet, causing IO page-faults. This
is fixed too by adding the necessary flushes before a new page-table
root is published.
Related to the race condition fixes these patches also add a missing
domain_flush_complete() barrier to update_domain() and a fix to bail
out of the loop which tries to increase the address space when the
call to increase_address_space() fails.
Qian was able to trigger the race conditions under high load and
memory pressure within a few days of testing. He confirmed that he
has seen no issues anymore with the fixes included here.
- Fix for a list-handling bug in the VirtIO IOMMU driver.
* tag 'iommu-fixes-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/virtio: Reverse arguments to list_add
iommu/amd: Do not flush Device Table in iommu_map_page()
iommu/amd: Update Device Table in increase_address_space()
iommu/amd: Call domain_flush_complete() in update_domain()
iommu/amd: Do not loop forever when trying to increase address space
iommu/amd: Fix race in increase_address_space()/fetch_pte()
Linus Torvalds [Sun, 10 May 2020 18:16:07 +0000 (11:16 -0700)]
Merge tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- a small series fixing a use-after-free of bdi name (Christoph,Yufen)
- NVMe fix for a regression with the smaller CQ update (Alexey)
- NVMe fix for a hang at namespace scanning error recovery (Sagi)
- fix race with blk-iocost iocg->abs_vdebt updates (Tejun)
* tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block:
nvme: fix possible hang when ns scanning fails during error recovery
nvme-pci: fix "slimmer CQ head update"
bdi: add a ->dev_name field to struct backing_dev_info
bdi: use bdi_dev_name() to get device name
bdi: move bdi_dev_name out of line
vboxsf: don't use the source name in the bdi name
iocost: protect iocg->abs_vdebt with iocg->waitq.lock
Linus Torvalds [Sun, 10 May 2020 00:50:03 +0000 (17:50 -0700)]
gcc-10: mark more functions __init to avoid section mismatch warnings
It seems that for whatever reason, gcc-10 ends up not inlining a couple
of functions that used to be inlined before. Even if they only have one
single callsite - it looks like gcc may have decided that the code was
unlikely, and not worth inlining.
The code generation difference is harmless, but caused a few new section
mismatch errors, since the (now no longer inlined) function wasn't in
the __init section, but called other init functions:
Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem()
Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap()
Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap()
So add the appropriate __init annotation to make modpost not complain.
In both cases there were trivially just a single callsite from another
__init function.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 9 May 2020 23:24:16 +0000 (16:24 -0700)]
Merge tag 'riscv-for-linus-5.7-rc5' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A smattering of fixes and cleanups:
- Dead code removal.
- Exporting riscv_cpuid_to_hartid_mask for modules.
- Per-CPU tracking of ISA features.
- Setting max_pfn correctly when probing memory.
- Adding a note to the VDSO so glibc can check the kernel's version
without a uname().
- A fix to force the bootloader to initialize the boot spin tables,
which still get used as a fallback when SBI-0.1 is enabled"
* tag 'riscv-for-linus-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Remove unused code from STRICT_KERNEL_RWX
riscv: force __cpu_up_ variables to put in data section
riscv: add Linux note to vdso
riscv: set max_pfn to the PFN of the last page
RISC-V: Remove N-extension related defines
RISC-V: Add bitmap reprensenting ISA features common across CPUs
RISC-V: Export riscv_cpuid_to_hartid_mask() API
Linus Torvalds [Sat, 9 May 2020 22:58:04 +0000 (15:58 -0700)]
gcc-10: avoid shadowing standard library 'free()' in crypto
gcc-10 has started warning about conflicting types for a few new
built-in functions, particularly 'free()'.
This results in warnings like:
crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch]
because the crypto layer had its local freeing functions called
'free()'.
Gcc-10 is in the wrong here, since that function is marked 'static', and
thus there is no chance of confusion with any standard library function
namespace.
But the simplest thing to do is to just use a different name here, and
avoid this gcc mis-feature.
[ Side note: gcc knowing about 'free()' is in itself not the
mis-feature: the semantics of 'free()' are special enough that a
compiler can validly do special things when seeing it.
So the mis-feature here is that gcc thinks that 'free()' is some
restricted name, and you can't shadow it as a local static function.
Making the special 'free()' semantics be a function attribute rather
than tied to the name would be the much better model ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 9 May 2020 22:45:21 +0000 (15:45 -0700)]
gcc-10: disable 'restrict' warning for now
gcc-10 now warns about passing aliasing pointers to functions that take
restricted pointers.
That's actually a great warning, and if we ever start using 'restrict'
in the kernel, it might be quite useful. But right now we don't, and it
turns out that the only thing this warns about is an idiom where we have
declared a few functions to be "printf-like" (which seems to make gcc
pick up the restricted pointer thing), and then we print to the same
buffer that we also use as an input.
And people do that as an odd concatenation pattern, with code like this:
#define sysfs_show_gen_prop(buffer, fmt, ...) \
snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)
where we have 'buffer' as both the destination of the final result, and
as the initial argument.
Yes, it's a bit questionable. And outside of the kernel, people do have
standard declarations like
int snprintf( char *restrict buffer, size_t bufsz,
const char *restrict format, ... );
where that output buffer is marked as a restrict pointer that cannot
alias with any other arguments.
But in the context of the kernel, that 'use snprintf() to concatenate to
the end result' does work, and the pattern shows up in multiple places.
And we have not marked our own version of snprintf() as taking restrict
pointers, so the warning is incorrect for now, and gcc picks it up on
its own.
If we do start using 'restrict' in the kernel (and it might be a good
idea if people find places where it matters), we'll need to figure out
how to avoid this issue for snprintf and friends. But in the meantime,
this warning is not useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 9 May 2020 22:40:52 +0000 (15:40 -0700)]
gcc-10: disable 'stringop-overflow' warning for now
This is the final array bounds warning removal for gcc-10 for now.
Again, the warning is good, and we should re-enable all these warnings
when we have converted all the legacy array declaration cases to
flexible arrays. But in the meantime, it's just noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sagi Grimberg [Wed, 6 May 2020 22:44:02 +0000 (15:44 -0700)]
nvme: fix possible hang when ns scanning fails during error recovery
When the controller is reconnecting, the host fails I/O and admin
commands as the host cannot reach the controller. ns scanning may
revalidate namespaces during that period and it is wrong to remove
namespaces due to these failures as we may hang (see
205da2434301).
One command that may fail is nvme_identify_ns_descs. Since we return
success due to having ns identify descriptor list optional, we continue
to compare ns identifiers in nvme_revalidate_disk, obviously fail and
return -ENODEV to nvme_validate_ns, which will remove the namespace.
Exactly what we don't want to happen.
Fixes:
22802bf742c2 ("nvme: Namepace identification descriptor list is optional")
Tested-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Alexey Dobriyan [Thu, 7 May 2020 20:07:04 +0000 (23:07 +0300)]
nvme-pci: fix "slimmer CQ head update"
Pre-incrementing ->cq_head can't be done in memory because OOB value
can be observed by another context.
This devalues space savings compared to original code :-\
$ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux
add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-32 (-32)
Function old new delta
nvme_poll_irqdisable 464 456 -8
nvme_poll 455 447 -8
nvme_irq 388 380 -8
nvme_dev_disable 955 947 -8
But the code is minimal now: one read for head, one read for q_depth,
one increment, one comparison, single instruction phase bit update and
one write for new head.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Fixes:
e2a366a4b0feaeb ("nvme-pci: slimmer CQ head update")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Mon, 4 May 2020 12:47:56 +0000 (14:47 +0200)]
bdi: add a ->dev_name field to struct backing_dev_info
Cache a copy of the name for the life time of the backing_dev_info
structure so that we can reference it even after unregistering.
Fixes:
68f23b89067f ("memcg: fix a crash in wb_workfn when a device disappears")
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yufen Yu [Mon, 4 May 2020 12:47:55 +0000 (14:47 +0200)]
bdi: use bdi_dev_name() to get device name
Use the common interface bdi_dev_name() to get device name.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Add missing <linux/backing-dev.h> include BFQ
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sat, 9 May 2020 21:52:44 +0000 (14:52 -0700)]
gcc-10: disable 'array-bounds' warning for now
This is another fine warning, related to the 'zero-length-bounds' one,
but hitting the same historical code in the kernel.
Because C didn't historically support flexible array members, we have
code that instead uses a one-sized array, the same way we have cases of
zero-sized arrays.
The one-sized arrays come from either not wanting to use the gcc
zero-sized array extension, or from a slight convenience-feature, where
particularly for strings, the size of the structure now includes the
allocation for the final NUL character.
So with a "char name[1];" at the end of a structure, you can do things
like
v = my_malloc(sizeof(struct vendor) + strlen(name));
and avoid the "+1" for the terminator.
Yes, the modern way to do that is with a flexible array, and using
'offsetof()' instead of 'sizeof()', and adding the "+1" by hand. That
also technically gets the size "more correct" in that it avoids any
alignment (and thus padding) issues, but this is another long-term
cleanup thing that will not happen for 5.7.
So disable the warning for now, even though it's potentially quite
useful. Having a slew of warnings that then hide more urgent new issues
is not an improvement.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 9 May 2020 21:30:29 +0000 (14:30 -0700)]
gcc-10: disable 'zero-length-bounds' warning for now
This is a fine warning, but we still have a number of zero-length arrays
in the kernel that come from the traditional gcc extension. Yes, they
are getting converted to flexible arrays, but in the meantime the gcc-10
warning about zero-length bounds is very verbose, and is hiding other
issues.
I missed one actual build failure because it was hidden among hundreds
of lines of warning. Thankfully I caught it on the second go before
pushing things out, but it convinced me that I really need to disable
the new warnings for now.
We'll hopefully be all done with our conversion to flexible arrays in
the not too distant future, and we can then re-enable this warning.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 9 May 2020 20:57:10 +0000 (13:57 -0700)]
Stop the ad-hoc games with -Wno-maybe-initialized
We have some rather random rules about when we accept the
"maybe-initialized" warnings, and when we don't.
For example, we consider it unreliable for gcc versions < 4.9, but also
if -O3 is enabled, or if optimizing for size. And then various kernel
config options disabled it, because they know that they trigger that
warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES).
And now gcc-10 seems to be introducing a lot of those warnings too, so
it falls under the same heading as 4.9 did.
At the same time, we have a very straightforward way to _enable_ that
warning when wanted: use "W=2" to enable more warnings.
So stop playing these ad-hoc games, and just disable that warning by
default, with the known and straight-forward "if you want to work on the
extra compiler warnings, use W=123".
Would it be great to have code that is always so obvious that it never
confuses the compiler whether a variable is used initialized or not?
Yes, it would. In a perfect world, the compilers would be smarter, and
our source code would be simpler.
That's currently not the world we live in, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 9 May 2020 19:02:09 +0000 (12:02 -0700)]
Merge tag 'io_uring-5.7-2020-05-08' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix finish_wait() balancing in file cancelation (Xiaoguang)
- Ensure early cleanup of resources in ring map failure (Xiaoguang)
- Ensure IORING_OP_SLICE does the right file mode checks (Pavel)
- Remove file opening from openat/openat2/statx, it's not needed and
messes with O_PATH
* tag 'io_uring-5.7-2020-05-08' of git://git.kernel.dk/linux-block:
io_uring: don't use 'fd' for openat/openat2/statx
splice: move f_mode checks to do_{splice,tee}()
io_uring: handle -EFAULT properly in io_uring_setup()
io_uring: fix mismatched finish_wait() calls in io_uring_cancel_files()
Linus Torvalds [Fri, 8 May 2020 17:36:56 +0000 (10:36 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four minor fixes, all in drivers (qla2xxx, ibmvfc, ibmvscsi)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvscsi: Fix WARN_ON during event pool release
scsi: ibmvfc: Don't send implicit logouts prior to NPIV login
scsi: qla2xxx: Delete all sessions before unregister local nvme port
scsi: qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV
Linus Torvalds [Fri, 8 May 2020 17:27:00 +0000 (10:27 -0700)]
Merge tag 'ceph-for-5.7-rc5' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Fixes for an endianness handling bug that prevented mounts on
big-endian arches, a spammy log message and a couple error paths.
Also included a MAINTAINERS update"
* tag 'ceph-for-5.7-rc5' of git://github.com/ceph/ceph-client:
ceph: demote quotarealm lookup warning to a debug message
MAINTAINERS: remove myself as ceph co-maintainer
ceph: fix double unlock in handle_cap_export()
ceph: fix special error code in ceph_try_get_caps()
ceph: fix endianness bug when handling MDS session feature bits
Luis Henriques [Tue, 5 May 2020 12:59:02 +0000 (13:59 +0100)]
ceph: demote quotarealm lookup warning to a debug message
A misconfigured cephx can easily result in having the kernel client
flooding the logs with:
ceph: Can't lookup inode 1 (err: -13)
Change this message to debug level.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/44546
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Linus Torvalds [Fri, 8 May 2020 16:11:53 +0000 (09:11 -0700)]
Merge tag 'char-misc-5.7-rc5' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 5.7-rc5 that resolve a number of
minor reported issues:
- mhi bus driver fixes found as people actually use the code
- phy driver fixes and compat string additions
- most driver fix due to link order changing when the core moved out
of staging
- mei driver fix
- interconnect build warning fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
bus: mhi: core: Fix channel device name conflict
bus: mhi: core: Fix typo in comment
bus: mhi: core: Offload register accesses to the controller
bus: mhi: core: Remove link_status() callback
bus: mhi: core: Make sure to powerdown if mhi_sync_power_up fails
bus: mhi: Fix parsing of mhi_flags
mei: me: disable mei interface on LBG servers.
phy: qualcomm: usb-hs-28nm: Prepare clocks in init
MAINTAINERS: Add Vinod Koul as Generic PHY co-maintainer
interconnect: qcom: Move the static keyword to the front of declaration
most: core: use function subsys_initcall()
bus: mhi: core: Fix a NULL vs IS_ERR check in mhi_create_devices()
phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string
phy: tegra: Select USB_COMMON for usb_get_maximum_speed()
Linus Torvalds [Fri, 8 May 2020 16:06:34 +0000 (09:06 -0700)]
Merge tag 'driver-core-5.7-rc5' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are a number of small driver core fixes for 5.7-rc5 to resolve a
bunch of reported issues with the current tree.
Biggest here are the reverts and patches from John Stultz to resolve a
bunch of deferred probe regressions we have been seeing in 5.7-rc
right now.
Along with those are some other smaller fixes:
- coredump crash fix
- devlink fix for when permissive mode was enabled
- amba and platform device dma_parms fixes
- component error silenced for when deferred probe happens
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
regulator: Revert "Use driver_deferred_probe_timeout for regulator_init_complete_work"
driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires
driver core: Use dev_warn() instead of dev_WARN() for deferred_probe_timeout warnings
driver core: Revert default driver_deferred_probe_timeout value to 0
component: Silence bind error on -EPROBE_DEFER
driver core: Fix handling of fw_devlink=permissive
coredump: fix crash when umh is disabled
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices