drm/amd/powerplay: fix smu clock type change miss error

in the smu module, use the smu_xxxclk type to identify the CLK type
use SMU_SCLK, SMU_MCLK to replace PP_SCLK, PP_MCLK.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support key database loading for navi10

Starting from navi10, driver should send Key Database Load command
to bootloader before loading sys_drv and sos

Signed-off-by: John Clements <John.Clements@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to macro for psp bootloader command

The command will be sent to psp bootloader from driver
to ask psp bootloader to exerise tOS, sys_drv and kdb loading

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Print out voltage in DM_PPLIB

As the clock is already logged, also log the voltage.

Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add drm_audio_component support to amdgpu_dm

[Why]
The drm_audio_component can be used to give pin ELD notifications
directly to the sound driver. This fixes audio endpoints disappearing
due to missing unsolicited notifications.

[How]
Send the notification via the audio component whenever we enable or
disable audio state on a stream. This matches what i915 does with
their drm_audio_component and what Takashi Iwai's proposed hack for
radeon/amdpgu did.

This is a bit delayed in when the notification actually occurs, however.
We wait until after all the programming is complete rather than sending
the notification mid sequence.

Particular care is needed for the get ELD callback since it can happen
outside the locking and fencing DRM does for atomic commits.

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expose audio inst from DC to DM

[Why]
In order to give pin notifications to the sound driver from DM we need
to know whether audio is enabled on a stream and what pin it's using
from DC.

[How]
Expose the instance via stream status if it's a mapped resource for
the stream. It will be -1 if there's no audio mapped.

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix cp hang in eviction

The cp hang occurs in OCL conformance test only on supermicro
platform which has 40 cores and the test generates 40 threads.
The root cause is race condition in non-protected flags.

The fix is to add flags of is_evicted and is_active(init_mqd())
into protected area.

Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable IP discovery by default on navi

Use the IP discovery table rather than hardcoding the
settings in the driver.

Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: fix DCE_HWIP mapping error in hw_id_map array

ID of DCE_HWIP from vbios is DMU_HWID,
mismatch cause null pointer crash in navi10 modprobe.

Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: bug fix for sysfs

when we set profile_peak to sysfs:power_dpm_force_performance_level,
we gets the wrong socclk level and mclk level.this patch fix this issue.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: increase the SMU msg response waiting time

This is expected to fix some mode1 reset failures. And this
affects SMU part only as the timeout setting for other parts
is controlled by a different macro.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix potential integer overflows

With mm_nodes larger than 4GB, byte_count in amdgpu_fill_buffer would
overflow.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: add a mutex to protect access to the psp ring

We need to serialize access to the psp ring if there are multiple
callers at runtime.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/navi10: add uclk activity sensor

Query the metrics table for the current uclk activity.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: properly guard the generic discovery code

It's only available on navi and newer.

Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add missing documentation on new module parameters

New parameters added for navi lack documentation.

Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback

This RELEASE_MEM use has the Release semantic, which means we should write
back but not invalidate. Invalidations only make sense with the Acquire
semantic (ACQUIRE_MEM), or when RELEASE_MEM is used to do the combined
Acquire-Release semantic, which is a barrier, not a fence.

The undesirable side effect of doing invalidations for the Release semantic
is that it invalidates caches while shaders are running, because the Release
can execute in the middle of the next IB.

UMDs should use ACQUIRE_MEM at the beginning of IBs. Doing cache
invalidations for a fence (like in this case) doesn't do anything
for correctness.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: avoid 64-bit division

On 32-bit architectures, dividing a 64-bit integer in the kernel
leads to a link error:

ERROR: "__udivdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: "__divdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!

Change the two recently introduced instances to a multiply+shift
operation that is also much cheaper on 32-bit architectures.
We can do that here, since both of them are really 32-bit numbers
that change a few percent.

Fixes: bedbbe6af4be ("drm/amd/display: Move link functions from dc to dc_link")
Fixes: f18bc4e53ad6 ("drm/amd/display: update calculated bounding box logic for NV")
Acked-by: Slava Abramov <slava.abramov@amd.com>
Tested-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp11: simplify the ucode register logic

Split it between navi10 and newer and everything before
navi10.

Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: properly guard DC support in navi code

Need to add appropriate ifdef.

Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: vega20: fix uninitialized variable use

If smu_get_current_rpm() fails, we can't use the output,
as that may be uninitialized:

drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3023:8: error: variable 'current_rpm' is used uninitialized whenever '?:' condition is false [-Werror,-Wsometimes-uninitialized]
        ret = smu_get_current_rpm(smu, &current_rpm);
              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/inc/amdgpu_smu.h:735:3: note: expanded from macro 'smu_get_current_rpm'
        ((smu)->funcs->get_current_rpm ? (smu)->funcs->get_current_rpm((smu), (speed)) : 0)
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3024:12: note: uninitialized use occurs here
        percent = current_rpm * 100 / pptable->FanMaximumRpm;
                  ^~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3023:8: note: remove the '?:' if its condition is always true
        ret = smu_get_current_rpm(smu, &current_rpm);
              ^
drivers/gpu/drm/amd/amdgpu/../powerplay/inc/amdgpu_smu.h:735:3: note: expanded from macro 'smu_get_current_rpm'
        ((smu)->funcs->get_current_rpm ? (smu)->funcs->get_current_rpm((smu), (speed)) : 0)
         ^
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3020:22: note: initialize the variable 'current_rpm' to silence this warning
        uint32_t current_rpm;

Propagate the error code in that case.

Fixes: ee0db82027ee ("drm/amd/powerplay: move PPTable_t uses into asic level")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dcn20: include linux/delay.h

Without this header, we get a compiler error in some configurations:

.../dc/dcn20/dcn20_hwseq.c: In function 'dcn20_hwss_wait_for_blank_complete':
.../dc/dcn20/dcn20_hwseq.c:1493:3: error: implicit declaration of function 'udelay' [-Werror=implicit-function-declaration]

Note: the use of udelay itself may be problematic, as can occupy
the CPU for 200ms in a busy-loop here.

Fixes: 7ed4e6352c16 ("drm/amd/display: Add DCN2 HW Sequencer and Resource")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu: make pmu support optional

When CONFIG_PERF_EVENTS is disabled, we cannot compile the pmu
portion of the amdgpu driver:

drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:48:38: error: no member named 'hw' in 'struct perf_event'
        struct hw_perf_event *hwc = &event->hw;
                                     ~~~~~  ^
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:51:13: error: no member named 'attr' in 'struct perf_event'
        if (event->attr.type != event->pmu->type)
            ~~~~~  ^
...

Use conditional compilation for this file.

Fixes: 9c7c85f7ea1f ("drm/amdgpu: add pmu counters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent

clang warns (trimmed for brevity):

drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3023:8: warning:
variable 'current_rpm' is used uninitialized whenever '?:' condition is
false [-Wsometimes-uninitialized]
        ret = smu_get_current_rpm(smu, &current_rpm);
              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

smu_get_current_rpm expands to a ternary operator conditional on
smu->funcs->get_current_rpm being not NULL. When this is false,
current_rpm will be uninitialized. Zero initialize current_rpm to
avoid using random stack values if that ever happens.

Fixes: ee0db82027ee ("drm/amd/powerplay: move PPTable_t uses into asic level")
Link: https://github.com/ClangBuiltLinux/linux/issues/588
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq

clang warns (trimmed for brevity):

drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1098:10: warning:
variable 'freq' is used uninitialized whenever '?:' condition is false
[-Wsometimes-uninitialized]
                ret =  smu_get_current_clk_freq_by_table(smu, clk_id, &freq);
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If get_current_clk_freq_by_table is ever NULL, freq will fail to be
properly initialized. Zero initialize it to avoid using uninitialized
stack values.

smu_get_current_clk_freq_by_table expands to a ternary operator
conditional on smu->funcs->get_current_clk_freq_by_table being not NULL.
When this is false, freq will be uninitialized. Zero initialize freq to
avoid using random stack values if that ever happens.

Fixes: e36182490dec ("drm/amd/powerplay: fix dpm freq unit error (10KHz -> Mhz)")
Link: https://github.com/ClangBuiltLinux/linux/issues/585
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Use memset to initialize metrics structs

clang warns:

drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:601:33: warning:
suggest braces around initialization of subobject [-Wmissing-braces]
        static SmuMetrics_t metrics = {0};
                                       ^
                                       {}
drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:905:26: warning:
suggest braces around initialization of subobject [-Wmissing-braces]
        SmuMetrics_t metrics = {0};
                                ^
                                {}
2 warnings generated.

One way to fix these warnings is to add additional braces like clang
suggests; however, there has been a bit of push back from some
maintainers[1][2], who just prefer memset as it is unambiguous, doesn't
depend on a particular compiler version[3], and properly initializes all
subobjects. Do that here so there are no more warnings.

[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
[3]: https://lore.kernel.org/lkml/20181116150432.2408a075@redhat.com/

Fixes: 98e1a543c7b1 ("drm/amd/powerplay: add function get current clock freq interface for navi10")
Fixes: ab43c4bf1cc8 ("drm/amd/powerplay: fix fan speed show error (for hwmon pwm)")
Link: https://github.com/ClangBuiltLinux/linux/issues/583
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes10.1: Fix header guard

clang warns:

 In file included from drivers/gpu/drm/amd/amdgpu/nv.c:53:
 drivers/gpu/drm/amd/amdgpu/../amdgpu/mes_v10_1.h:24:9: warning:
 '__MES_V10_1_H__' is used as a header guard here, followed by #define of
 a different macro [-Wheader-guard]
 #ifndef __MES_V10_1_H__
         ^~~~~~~~~~~~~~~
 drivers/gpu/drm/amd/amdgpu/../amdgpu/mes_v10_1.h:25:9: note:
 '__MES_v10_1_H__' is defined here; did you mean '__MES_V10_1_H__'?
 #define __MES_v10_1_H__
         ^~~~~~~~~~~~~~~
         __MES_V10_1_H__
 1 warning generated.

Capitalize the V.

Fixes: 886f82aa7a1d ("drm/amdgpu/mes10.1: add ip block mes10.1 (v2)")
Link: https://github.com/ClangBuiltLinux/linux/issues/582
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add temperature sensor support for navi10

the hwmon interface need temperature sensor type support.
1. SENSOR_HOTSPOT_TEMP
2. SENSOR_EDGE_TEMP(SENSOR_GPU_TEMP)
3. SENSOR_MEM_TEMP

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix scheduler timeout calc

scheduler timeout is in jiffies
v2: move timeout check to amdgpu_device_get_job_timeout_settings after
parsing the value
v3: add lockup_timeout param check. 0: keep default value. negative:
infinity timeout.
v4: refactor codes.

Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Prepare for hmm_range_register API change (v2)

An upcoming change in the hmm_range_register API requires passing in
a pointer to an hmm_mirror instead of mm_struct. To access the
hmm_mirror we need pass bo instead of ttm to amdgpu_ttm_tt_get_user_pages
because mirror is part of amdgpu_mn structure, which is accessible from bo.

v2: fix building without CONFIG_HMM_MIRROR (Arnd)

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mode1 (psp) reset for navi asic

add mode1 (by psp) reset for navi asic.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Disable ras features on all IPs before gpu reset

Perform a ras_suspend to disable ras on all IPs to workaround
some ROCm stability issue.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add baco smu reset function for smu11

add baco reset support for smu11.
it can help gpu do asic reset when gpu recovery.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: increase waiting time for smu response

We observed some SMU commands take more time for execution,
so increase waiting time for response.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay/smu7_hwmgr: replace blocking delay with non-blocking

This driver currently contains a repeated 500ms blocking delay call
which causes frequent major buffer underruns in PulseAudio. This patch
fixes this issue by replacing the blocking delay with a non-blocking
sleep call.

Signed-off-by: Yrjan Skrimstad <yrjan@skrimstad.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use kmemdup rather than duplicating its implementation

kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.

Reviewed-by: Christian König <Christian.Koenig@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Disable idle optimization for chained runlist

This works around difficult-to-reproduce soft hangs on oversubscribed
runlists.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add chained_runlist_idle_disable flag to pm4_mes_runlist

New flag to disable an idle runlist optimization that is causing soft
hangs with some diffult-to-reproduce customer workloads. This will
serve as a workaround until the problem can be reproduced and the
root-cause determined.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix tracking of invalid userptrs

Restore the code that resets mem->invalid. Othewise so mapping
userptrs after they got an MMU notifiers would always be skipped.

This also avoids unnecessarily calling get_user_pages on BOs that
have not been invalidated since the last try.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use FENCE_OWNER_KFD in process_sync_pds_resv

We don't want eviction fences to trigger when waiting for page table
updates to complete during restore. In theory there shouldn't be any
unsignaled eviction fences in the PD reservation object, but I'm
seeing them in instrumented code for reasons not fully understood.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Print a warning when the runlist becomes oversubscribed

Oversubscription of queues or processes results in poor performance
mostly because HWS blinbly schedules busy and idle queues, resulting
in poor occupancy if many queues are idle.

Let users know with a warning message when transitioning from a
non-oversubscribed to an oversubscribed runlist.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remove an unused variable

Just for cleanup.

Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: fix interrupt client id for navi

All asics newer than vega10 use client ids, so simplify the
check.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remove duplicated PCIE atomics request

Since amdgpu has always requested PCIE atomics, kfd don't
need duplicated PCIE atomics enablement. Referring to amdgpu
request result is enough.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable PCIE atomics ops support

GPU atomics operation depends on PCIE atomics support.
Always enable PCIE atomics ops support in case that
it hasn't been enabled.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add field indicating if has PCIE atomics support

The new field in amdgpu device is used to record whether the
system has PCIE atomics support. The field can be exposed to
UMD or kfd whether PCIE atomics have supported.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: use hardware fan control if no powerplay fan table

Otherwise, you may get divided-by-zero error or corrput the SMU fan
control feature.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Slava Abramov <slava.abramov@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix MGPU fan boost enablement for XGMI reset

MGPU fan boost feature should not be enabled until all the
devices from the same hive are all back from reset.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: handle AMDGPU_IB_FLAG_RESET_GDS_MAX_WAVE_ID on gfx10

Add the gfx10 equivalent of the gfx9 code.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)

v2: update emit_ib_size
(though it's still wrong because it was wrong before)

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: use reset default for PA_SC_FIFO_SIZE

Recommended by the hw team.

Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: use reset default for PA_SC_FIFO_SIZE

Recommended by the hw team.

Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Don't skip display settings in hwmgr_resume()

I'm not entirely sure why this is, but for some reason:

921935dc6404 ("drm/amd/powerplay: enforce display related settings only on needed")

Breaks runtime PM resume on the Radeon PRO WX 3100 (Lexa) in one the
pre-production laptops I have. The issue manifests as the following
messages in dmesg:

[drm] UVD and UVD ENC initialized successfully.
amdgpu 0000:3b:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vce1 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-110).

And happens after about 6-10 runtime PM suspend/resume cycles (sometimes
sooner, if you're lucky!). Unfortunately I can't seem to pin down
precisely which part in psm_adjust_power_state_dynamic that is causing
the issue, but not skipping the display setting setup seems to fix it.
Hopefully if there is a better fix for this, this patch will spark
discussion around it.

Fixes: 921935dc6404 ("drm/amd/powerplay: enforce display related settings only on needed")
Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update smu11_driver_if_navi10.h

update the smu11_driver_if_navi10.h since navi10 smu fw
update to 42.28

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix a couple of spelling mistakes

There are a couple of spelling mistakes in dm_error messages and
a comment. Fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: no memory activity support on Vega10

Make mem_busy_percent sysfs interface invisible on Vega10.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remove unnecessary warning message on gpu reset

In XGMI configuration, more than one asic can be reset at same time,
kfd is able to handle this and no need to trigger the warning

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set queue_preemption_timeout_ms default value

Set default value of this kernel parameter to 9000

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add missing smu_get_clk_info_from_vbios() call

This seems a merge error.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: support runtime ppfeatures setting on Navi10

Implement Navi10 backend for runtime ppfeatures status retrieving
and setting support.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: check prerequisite for VCN power gating

VCN DPM is a necessary prerequisite for VCN power gating.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: return -EBUSY if waiting for busy BO fails

Returning -EAGAIN prevents ttm_bo_mem_space from trying alternate
placements and can lead to live-locks in amdgpu_cs, retrying
indefinitely and never succeeding.

Fixes: d367bd2a5e2b12 ("drm/ttm: fix busy memory to fail other user v10")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop copy/paste leftover to fix big endian

The buf swap field doesn't exist on RB1.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix warning on 32 bit

Properly cast pointer to int.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-next-5.3-2019-06-25' of git://people.freedesktop.org/~agd5f/linux into drm-next

drm-next-5.3-2019-06-25:

Merge drm-next

amdgpu:
- SR-IOV L1 policy fixes
- Removed no longer needed vram_page_split module parameter
- Add module parameter to override default ABM level
- Gamma fixes
- No need to check return values for debugfs
- Improve HMM error handling
- Avoid possible OOM situations when lots of thread are submitting with
  memory contention
- Improve hw i2c access abritration
- DSC (Display Stream Compression) support in DC
- Initial navi10 support
  * DC support
  * GFX/Compute support
  * SDMA support
  * Power Management support
  * VCN support
- Static checker fixes
- Misc cleanups
- fix long udelay on arm

amdkfd:
- Implement priority controls for gfx9
- Enable VEGAM
- Rework mqd allocation and init
- Circular locking fix
- Fix SDMA queue allocation race condition
- No need to check return values for debugfs
- Add proc style process information
- Initial navi10 support

radeon:
- No need to check return values for debugfs

UAPI changes:
- GDDR6 added to vram type query
- New Navi10 details added gpu info query
- Navi family added to asic family query

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625195520.3817-1-alexander.deucher@amd.com

Merge tag 'for-airlie-tda998x' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next

TDA998x updates:
- improve the driver's approach to audio, adding support for more I2S
  based formats, particularly other justifications, and preparing the
  driver to support other bclk ratios.

- add support for pixel repeated modes, tested with a Panasonic TV.

- correct the quantisation range handling; in particular, do not send
  full range RGB to the sink when the sink does not support full range
  RGB.

- Send the HDMI vendor info frame when required.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Russell King <rmk@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625125005.GA31503@rmk-PC.armlinux.org.uk

drm/amd/powerplay: make athub pg bit configured by pg_flags

The athub pg features enabling should be indicated by pg_flags.

Reported-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: make mmhub pg bit configured by pg_flags

The mmhub pg features enabling should be indicated by pg_flags.

Reported-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add feature check in unforce_dpm_levels function (v2)

if not check dpm feature is enabled, it will cause show smc send message
failed log in dmesg log.
eg:
echo "auto" > power_dpm_force_performance_level

v2: whitespace fix (Alex)

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: check gfxclk dpm enablement before proceeding

Support gfxclk dpm disablement.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: print smu versions only if version mismatch

only printf smu version when if version not matched.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix fan speed show error (for hwmon pwm)

the navi asic can't get current rpm by MSG_GetCurrentRpm,
it will cause show fan rpm error, use Metrics_t to replace it.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update infoframe after dig fe is turned on (v2)

[Why]
The AVI infoframe is incorrectly programmed on DCN1/2 when enabling a
stream - causing the wrong pixel encoding to be used for display.

This is because the AVI infoframe is programmed before the DIG BE is
connected to the FE and turned on, so enabling the AFMT block doesn't
actually work and the registers subsequently can't be written to.

[How]
Program the infoframe *after* turning on the DIG FE. This was the
behavior previously used but it was incorrectly reverted
when adding the DCN2 HW sequencer code.

v2: Don't call update_info_frame twice

Fixes: 7ed4e6352c16fe01 ("drm/amd/display: Add DCN2 HW Sequencer and Resource")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay:clean up the residual mutex for smu_hw_init

The mutex for procting SMU during hw_init was removed as system
will be deadlock when smu_populate_umd_state_clk try get SMU mutex.
Therefore need remove the residual mutex from failed path.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: sdma_v4_0_start: initialize r

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1167 sdma_v4_0_start() error: uninitialized symbol 'r'.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix style issues in dcn20_resource.c

Inconsistent indentation and mixed use of brackets.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Check stream in amdgpu_dm_commit_planes

Reported by smatch:
amdgpu_dm.c:5637 amdgpu_dm_commit_planes() error: we previously assumed 'acrtc_state->stream' could be null
This seems to be checked for null pretty consistently elsewhere.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: amdgpu_hwmon_show_temp: initialize temp

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:1496 amdgpu_hwmon_show_temp() error: uninitialized symbol 'temp'.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix amdgpu_set_pp_od_clk_voltage error check

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:693 amdgpu_set_pp_od_clk_voltage() error: uninitialized symbol 'ret'.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Indent AMD_IS_APU properly

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/soc15.c:715 soc15_get_pcie_usage() warn: inconsistent indenting
And a similar one in si.c.

Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: drop ifdefs around comments

No need to protect the comments.  The DCN1_01 config
was dopped anyway.  Got accidently brought back with the
navi merge.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: switch udelay to msleep

We may need to sleep for up to 80ms
(8ms per each of up to 10 loop iterations):

/* First DPCD read after VDD ON can fail if the particular board
 * does not have HPD pin wired correctly. So if DPCD read fails,
 * which it should never happen, retry a few times. Target worst
 * case scenario of 80 ms.
 */

Switch udelay to msleep to avoid limits on arm.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: FEATURE_MASK is 64 bit so use ULL

ULL is needed for 32 bit arches.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'drm-next' into drm-next-5.3

Backmerge drm-next and fix up conflicts due to drmP.h removal.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/edid: use for_each_displayid_db where applicable

Replace the duplicated versions of the while loop with the new macro.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619183033.6922-1-andresx7@gmail.com

drm/edid: parse CEA blocks embedded in DisplayID

DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.

This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.

This change fixes audio support for the Valve Index HMD.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com

Merge tag 'drm/tegra/for-5.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v5.3-rc1

This contains a couple of small improvements and cleanups for the Tegra
DRM driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621150753.19550-1-thierry.reding@gmail.com

Merge commit 'refs/for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next

Picking up pace on the upstreaming of Komeda driver, with quite a lot
of new features added this time. On top of that we have the small
cleanups and improved usage of the debugfs functions. Please pull!

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621095349.GI17204@e110455-lin.cambridge.arm.com

drm/amdgpu: disable gfxoff on navi10

The gfxoff brings unstability, disable it by default

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix modprobe failure for uvd_4/5/6

For uvd_4/5/6, amdgpu driver will only power on them when
there are jobs assigned to decode/enc rings.uvd_4/5/6 dpm was broken
since amdgpu_dpm_set_powergating_by_smu only covers gfx block.

The change would add more IP block support in amdgpu_dpm_set_powergating_by_smu
For GFX/UVD/VCN/VCE, if the new SMU driver is supported, invoke new
power gate helper function smu_dpm_set_power_gate, otherwise, fallback to
legacy powerplay helper function pp_set_powergating_by_smu. For other IP blocks
always invoke legacy powerplay helper function.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop unused df init callback

It was replaced with the sw_init callback so is no longer
needed.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:  add sw_init to df_v1_7

change df_init to df_sw_init df 1.7 to prevent regression issues on pre-vega20
products when callback is called in sw_common_sw_init.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Set gws_mask to 64 bit 1s

Previous kfd doesn't use gws so this mask was set to 0.
Set it to 64 bit 1s because now kfd can use all 64 gws
resources.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc: set num-dwb = 1 as navi10 asic cap

during navi10 bring up, dwb causes system hang.
to continue debug major issue, disable dwb by
set num-dwb = 0. the hang issue is not reproduced now
by enable num-dwb =1. dc source is shared by all os.
win needs num-dwb = 1.

Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make clk_mgr call enable_pme_wa

[why]
Before for raven and navi we are calling pp_smu functions for pme

[how]
refactor a code so we will call clk_mgr's enable_pme_wa function so we
can use pme_wa for future asics. This way we don't need to worry about
different ASIC since clk_mgr already have that information

Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: expose dentist_get_did_from_divider

for future use

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add missing mod_vmid destructor

mod_vmid is missing a destructor.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Underflow Asserts to dc

[Why]
For debugging underflow issues it can be useful to have asserts when the
underflow initially occurs.

[How]
Read the underflow status registers after actions that have a high risk
of causing underflow and assert that no underflow occurred. If underflow
occurred, clear the bit.

Signed-off-by: Thomas Lim <Thomas.Lim@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move vmid determination logic to a module

Currently vmid is decided internally inside dc. With the introduction
of new asics we are required to coordinate vmid use with external
components.

This change converts vmid logic to a DAL module allowing vmid to be
passed in as a parameter to DC.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dcn2 use fixed clocks.

[Description]
dcn2 use fixed clocks and not program DPP CLK or Disp_CLK.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>