procfs.c: Remove unused functions and make many functions static

gdb/ChangeLog:

        * procfs.c (procfs_find_new_threads, procfs_pid_to_str,
        proc_warn, proc_error, proc_get_status, proc_flags,
        proc_why, proc_what, proc_nsysarg, proc_sysargs,
        proc_set_run_on_last_close, proc_unset_run_on_last_close,
        proc_unset_inherit_on_fork, proc_set_async, proc_unset_async,
        proc_stop_process, proc_wait_for_stop, proc_run_process,
        proc_set_traced_signals, proc_set_traced_faults,
        proc_set_traced_sysentry, proc_set_traced_sysexit,
        proc_set_held_signals, proc_get_held_signals,
        proc_get_traced_signals, proc_get_traced_faults,
        proc_get_traced_sysentry, proc_get_traced_sysexit,
        proc_clear_current_fault, proc_set_current_signal,
        proc_clear_current_signal, proc_get_gregs, proc_get_fpregs,
        proc_set_gregs, proc_set_fpregs, proc_kill, proc_parent_pid,
        proc_get_nthreads, proc_get_nthreads, proc_get_nthreads,
        proc_get_current_thread, proc_get_current_thread,
        proc_get_current_thread, proc_update_threads,
        proc_update_threads, proc_update_threads, proc_update_threads,
        proc_iterate_over_threads, procfs_find_new_threads,
        procfs_pid_to_str): Make static.  Remove advance declaration.
        (proc_cursig): Make static.  Conditionalized defintion on
        PROCFS_DONT_PIOCSSIG_CURSIG being defined.
        (proc_syscall, proc_set_kill_on_last_close,
        proc_unset_kill_on_last_close, proc_set_inherit_on_fork,
        proc_get_pending_signals, proc_get_signal_actions,
        proc_trace_signal, proc_ignore_signal): Delete.

Expect addend as signed

binutils/testsuite/

* binutils-all/hppa/objdump.exp: Expect addend as signed.

gas/testsuite/

* gas/all/weakref1.d: Expect addend as signed.
* gas/arm/pic_vxworks.d: Likewise.
* gas/arm/wince.d: Likewise.
* gas/h8300/h8300.exp: Likewise.
* gas/i386/sub.d: Likewise.
* gas/mips/ecoff@ld.d: Likewise.
* gas/mips/ecoff@sd.d: Likewise.
* gas/mips/l_d-n32.d: Likewise.
* gas/mips/l_d-n64.d: Likewise.
* gas/mips/l_d.d: Likewise.
* gas/mips/ld-n32.d: Likewise.
* gas/mips/ld-n64.d: Likewise.
* gas/mips/ld.d: Likewise.
* gas/mips/mips1@l_d.d: Likewise.
* gas/mips/mips1@ld-forward.d: Likewise.
* gas/mips/mips1@ld.d: Likewise.
* gas/mips/mips1@s_d.d: Likewise.
* gas/mips/s_d-n32.d: Likewise.
* gas/mips/s_d-n64.d: Likewise.
* gas/mips/s_d.d: Likewise.
* gas/mips/sd-n32.d: Likewise.
* gas/mips/sd-n64.d: Likewise.
* gas/mips/sd.d: Likewise.
* gas/mmix/bz-c.d: Likewise.
* gas/mmix/geta-c.d: Likewise.
* gas/mmix/jump-c.d: Likewise.
* gas/mmix/pushj-c.d: Likewise.
* gas/mmix/pushj-cs.d: Likewise.
* gas/mmix/reloc16-n.d: Likewise.
* gas/mmix/reloc16-r.d: Likewise.
* gas/mmix/reloc16.d: Likewise.
* gas/mmix/reloc8-r.d: Likewise.
* gas/mmix/reloc8.d: Likewise.
* gas/mmix/relocxrn.d: Likewise.
* gas/sh/sh64/case-1.d: Likewise.
* gas/sh/sh64/mix-1.d: Likewise.
* gas/sh/sh64/pt32-1.d: Likewise.
* gas/sh/sh64/pt64-1.d: Likewise.
* gas/sh/sh64/pt64-32-2.d: Likewise.
* gas/sh/sh64/rel32-2.d: Likewise.
* gas/sh/sh64/rel32-4.d: Likewise.
* gas/sh/sh64/rel64-2.d: Likewise.
* gas/sh/sh64/rel64-4.d: Likewise.
* gas/tic6x/data-reloc.d: Likewise.
* gas/tic6x/pcr-relocs.d: Likewise.
* gas/xstormy16/allinsn.d: Likewise.
* gas/xstormy16/reloc-1.d: Likewise.
* gas/xstormy16/reloc-2.d: Likewise.

ld/testsuite/

* ld-arm/emit-relocs1-vxworks.d: Expect addend as signed.
* ld-spu/pic.d: Likewise.

PR 14072
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.

* lib/ld-lib.exp (run_dump_test): For options "warning" and
"error", append to earlier option values without adding a space.

typo fixes

binutils/
* dwarf.c (process_debug_info): Display abbrev offset in hex.
(display_debug_abbrev): Show offset of abbrev.

binutils/testsuite/
* binutils-all/objdump.W: Update.
* binutils-all/readelf.wa: Update.
* binutils-all/i386/compressed-1a.d: Update.
* binutils-all/x86-64/compressed-1a.d: Update.

gas/testsuite/
* gas/elf/dwarf2-1.d: Update.
* gas/elf/dwarf2-2.d: Update.
* gas/i386/dw2-compress-1.d: Update.

* dwarf.c (display_debug_ranges): Don't report more than one use
of the same range set as an overlap.

* gas/ppc/vle.d: Pass -a32 to assembler.
* gas/ppc/vle-reloc.d: Likewise.
* gas/ppc/vle-simple-1.d: Likewise, also match wider addresses.
* gas/ppc/vle-simple-2.d: Likewise.
* gas/ppc/vle-simple-3.d: Likewise.
* gas/ppc/vle-simple-4.d: Likewise.
* gas/ppc/vle-simple-5.d: Likewise.
* gas/ppc/vle-simple-6.d: Likewise.

* elf.c (ignore_section_sym): Correct comment.  Don't return
true for absolute section.
(elf_map_symbols): Move stray comment.  Adjust for above change.
Don't discard global section symbols.

* ld-m68k/tls-ld-1.d: Update.

bfd/
* elf32-ppc.c (ppc_elf_finish_dynamic_symbol): Don't make _DYNAMIC,
_GLOBAL_OFFSET_TABLE_ or _PROCEDURE_LINKAGE_TABLE_ absolute.
* elf64-ppc.c (ppc64_elf_finish_dynamic_symbol): Don't make _DYNAMIC
absolute.
ld/testsuite/
* ld-powerpc/tlsso.r: Update for dynamic sym changes.
* ld-powerpc/tlsso32.d: Likewise.
* ld-powerpc/tlsso32.r: Likewise.
* ld-powerpc/tlstocso.r: Likewise.

bfd/
* elf32-ppc.c (has_tls_reloc, has_tls_get_addr_call, has_vle_insns,
is_ppc_vle): Move to..
* elf32-ppc.h: ..here, making is_ppc_vle a macro.
opcodes/
* ppc_dis.c: Don't include elf/ppc.h.

*** empty log message ***

daily update

2012-05-16  Sergio Durigan Junior  <sergiodj@redhat.com>

* coffread.c (cs_section_address): Passing proper argument for
`bfd_get_section_vma'.
* dwarf2read.c (dwarf2_locate_sections): Likewise, for
`bfd_get_section_flags'.
* remote.c (remote_trace_set_readonly_regions): Likewise, for
`bfd_get_section_vma'.

PR macros/13205:
* macrotab.h: (macro_define_special): Declare.
(enum macro_special_kind): New.
(struct macro_definition) <argc, replacement>: Update comments.
* macrotab.c (new_macro_definition): Unconditionally set 'argc'.
(macro_define_object_internal): New function.
(macro_define_object): Use it.
(macro_define_special): New function.
(fixup_definition): New function.
(macro_lookup_definition, foreach_macro_in_scope)
(foreach_macro): Use fixup_definition.
* macroexp.h (macro_stringify): Declare.
* macroexp.c (free_buffer_return_text): New function.
(stringify): Constify "arg".
(macro_stringify): New function.
* dwarf2read.c (macro_start_file): Call macro_define_special.
testsuite
* gdb.base/macscp1.c (macscp_expr): Add comment.
* gdb.base/macscp.exp: Test __FILE__ and __LINE__.

* ld-arm/gc-hidden-1.d: Fix disassembly pattern.

Fix one of my ChangeLog entries.

I copy/pasted the wrong text... This fixes it.

* bfd-in.h (bfd_get_section_name, bfd_get_section_vma,
bfd_get_section_lma, bfd_get_section_alignment,
bfd_get_section_flags, bfd_get_section_userdata): Rewrite macros
in order to use the `bfd' argument.
* bfd-in2.h: Regenerate.
* elf-vxworks.c (elf_vxworks_finish_dynamic_entry): Pass proper `bfd'
as the first argument for `bfd_get_section_alignment'.
* elf32-arm.c (create_ifunc_sections): Likewise, for
`bfd_set_section_alignment'.
* elf32-m32r.c (m32r_elf_relocate_section): Likewise, for
`bfd_get_section_name'.
* elf32-microblaze.c (microblaze_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf64-mmix.c (mmix_final_link_relocate): Likewise, for
`bfd_get_section_vma'.
* elf64-ppc.c (create_linkage_sections): Likewise, for
`bfd_set_section_alignment'.

* emultempl/m68hc1xelf.em (hook_in_stub): Pass proper `bfd'
as the first argument for `bfd_get_section_name'.

* config/tc-alpha.c (maybe_set_gp): Pass proper `bfd'
as the first argument for `bfd_get_section_vma'.

PR gas/14082
* app.c (do_scrub_chars): Prevent possible out of bounds access to
lex[] array.

PR 13503
* reloc.c: Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenrate.
* elf32-avr.c (elf_avr_howto_table): Rename R_AVR_8_HHI8 to
R_AVR_8_HLO8.
(avr_reloc_map): Ditto.

* config/tc-avr.c (avr_cons_fix_new): Rename R_AVR_8_HHI8 to
R_AVR_8_HLO8.
(exp_mod_data) Ditto. And replace "hhi8" with "hlo8".
(md_apply_fix): Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.

* avr.h (RELOC_NUMBERS): Rename R_AVR_8_HHI8 to R_AVR_8_HLO8.

gdb/
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested.  Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise.  Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention.  Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.

gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.

PR binutils/13558
* bfd/aout-cris.c: Include sysdep.h before bfd.h.
* bfd/aout-ns32k.c: Likewise.
* bfd/aout-sparcle.c: Likewise.
* bfd/aout0.c: Likewise.
* bfd/bfd-in2.h: Likewise.
* bfd/coff-stgo32.c: Likewise.
* bfd/cpu-lm32.c: Likewise.
* bfd/cpu-microblaze.c: Likewise.
* bfd/cpu-score.c: Likewise.
* bfd/cpu-tilegx.c: Likewise.
* bfd/cpu-tilepro.c: Likewise.
* bfd/elf32-lm32.c: Likewise.
* bfd/elf32-microblaze.c: Likewise.
* bfd/elf32-score7.c: Likewise.
* bfd/elf32-tilepro.c: Likewise.
* bfd/elfxx-tilegx.c: Likewise.
* bfd/mach-o.h: Likewise.
* bfd/nlm32-ppc.c: Likewise.
* bfd/ns32knetbsd.c: Likewise.
* bfd/pef.h: Likewise.
* bfd/plugin.c: Likewise.
* bfd/stab-syms.c: Likewise.
* bfd/sunos.c: Likewise.
* bfd/syms.c: Likewise.
* bfd/xsym.h: Likewise.

* Makefile.am (CFILES): Add syslex_wrap.c.
(sysinfo): Depend upon syslex_wrap.o.
(syslex_wrap.o): New rule.
(syslex.o): Delete rule.
* syslex_wrap.c: New file.
* Makefile.in: Regenerate.

* elflink.c: Rename flaginfo to flinfo throughout, except..
(bfd_elf_lookup_section_flags): ..here, rename finfo to flaginfo.
Formatting, style.  Simplify flag match.

* dwarf2.c: Formatting.
(arange_add): Pass in unit rather than bfd.  Update callers.
Ignore empty ranges.  Don't ask for cleared memory.
(parse_comp_unit): Only set unit->base_address if processing
DW_TAG_compile_unit.
(find_debug_info): Optimise section lookup.
(place_sections): Use bfd_alloc for stash->adjusted_sections.
(find_line): Match previously parsed comp unit addresses as we
do for newly parsed comp units.

* archive.c (_bfd_generic_read_ar_hdr_mag):  Ensure sscanf
stops at end of ar_size field.

* arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
to PUSH/POP {reg}.

* binutils-all/arm/objdump.exp:
STMFD/LDMIA sp!, {reg} don't disassemble to PUSH/POP {reg} any longer.

* gas/arm/stm-ldm.d: STMFD/LDMIA sp!, {reg} don't disassemble to
PUSH/POP {reg} any longer.  Some new test cases have been added as well.
* gas/arm/stm-ldm.s: Likewise.

PR ld/14069
* emultempl/elf32.em: Include *-*-gnu* targets in ld.so.conf
support.

* config/tc-m68k.c (m68k_cpus): Add 51ag, 51je, 51jf, 51jg, 51mm,
51qm variants.

  PR ld/13962
  PR ld/7023
* elf.c (bfd_section_from_shdr): Fail when .dynsym sh_info is
out of range.  As a special case, fix sh_info for zero sh_size.
Do the same for .symtab.

daily update

*** empty log message ***

* python/python.c (gdbpy_find_pc_line): Use gdb_py_ulongest.

Rewrote a loop that caused a seg fault on Windows systems.

init_breakpoint_sal: Add quotes around part of command in error message

gdb/ChangeLog:

        * breakpoint.c (init_breakpoint_sal): Add quotes around part
        of command in two error message.

Remove trailing spaces in breakpoint.c:init_breakpoint_sal

gdb/ChangeLog:

        * breakpoint.c (init_breakpoint_sal): Remove trailing spaces.

Minor style fixes in breakpoint.c:find_condition_and_thread

Mostly removing trailing spaces at end of lines, and also adding
an empty line after the function's documentation.

gdb/ChangeLog:

        * breakpoint.c (find_condition_and_thread): Minor reformatting.

gdb/testsuite/
* gdb.base/dprintf.exp: Remove now redundant breakpoint for main.

gdb/testsuite/
PR testsuite/12649
* gdb.base/dprintf.exp: Replace gdb_run_cmd by runto main.

* config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Tweak target flags to match other tools. (i.e. -m m68hc11).
* doc/as.texinfo: Mention new options.
* doc/c-m68hc11.texi: Document new options.
* NEWS: Mention new support.

* archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg.
* config.bfd: Likewise.
* cpu-m9s12x.c: New.
* cpu-m9s12xg.c: New.
* elf32-m68hc12.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Fix carry bug in IMM16 (IMM8 low/high) relocate.
* Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg.
(ALL_MACHINES_CFILES): Likewise.
* reloc.c: Add S12X relocs.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.

* gas/m68hc11/insns9s12x.s: New
* gas/m68hc11/insns9s12x.d: New
* gas/m68hc11/hexprefix.s: New
* gas/m68hc11/hexprefix.d: New
* gas/m68hc11/9s12x-exg-sex-tfr.s: New
* gas/m68hc11/9s12x-exg-sex-tfr.d: New
* gas/m68hc11/insns9s12xg.s: New
* gas/m68hc11/insns9s12xg.d: New
* gas/m68hc11/9s12x-mov.s: New
* gas/m68hc11/9s12x-mov.d: New
* gas/m68hc11/m68hc11.exp: Updated
* gas/m68hc11/*.d: Brought in line with changed objdump output.
* gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3.
* gas/elf/elf.exp: XFAIL all hc11/12 targets for redef.
* gas/elf/dwarf2-1.d: Skip for hc11/12 targets.
* gas/elf/dwarf2-2.d: Likewise.

* ld-m68hc11/xgate-link.s: New.
* ld-m68hc11/xgate-link.d: New.
* ld-m68hc11/xgate-offset.s: New.
* ld-m68hc11/xgate-offset.d: New.
* ld-m68hc11/xgate1.s: New.
* ld-m68hc11/xgate1.d: New.
* ld-m68hc11/xgate2.s: New.
* ld-m68hc11/m68hc11.exp: Updated.
* ld-m68hc11/*.d: Brought in line with changed objdump output.
* ld-gc/gc.exp: Update CFLAGS for m68hc11.
* ld-plugin/plugin.exp: Likewise.
* ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12.

* configure.in: Add S12X and XGATE co-processor support to m68hc11
target.
* disassemble.c: Likewise.
* configure: Regenerate.
* m68hc11-dis.c: Make objdump output more consistent, use hex
instead of decimal and use 0x prefix for hex.
* m68hc11-opc.c: Add S12X and XGATE opcodes.
* dis-asm.h (print_insn_m9s12x): Prototype.
(print_insn_m9s12xg): Prototype.

* m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10)
R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations.
(E_M68HC11_XGATE_RAMOFFSET): Define.

* m68hc11.h: Add XGate definitions.
(struct m68hc11_opcode): Add xg_mask field.

gdb/
* NEWS (show auto-load scripts-directory): Add forgotten command.

gdb/
* spu-tdep.c (spu_catch_start): Update create_breakpoint caller
parameters.

Fix PLT section number regexps in sparc TLS tests.

ld/testsuite/

* ld-sparc/tlssunbin32.rd: Update.
* ld-sparc/tlssunbin64.rd: Likewise.

* config/rx-parse.y (rx_range): declare.
(O1,O2,O3,O4): Add calls to rx_range.
(UO1,UO2,UO3): Likewise.
(IMM2,IMMB): Likewise.
(rx_range): New.

* config/tc-rx.c (rx_fetchalign): Declare.
(md_pseudo_table): Add .fetchalign.
(RX_NBASE_FETCHALIGN): New.
(fetchalign_bytes): New.
(rx_fetchalign): New.
(rx_frag_init): If a "magic" value is found, also init the
machine-specific data.
(md_assemble): Note following opcode size if called for.
(rx_next_opcode): New.
(rx_relax_frag): Support .fetchalign.
(md_convert_frag): Likewise.
* doc/c-rx.texi (RX-Directives): Add .fetchalign.

daily update

*** empty log message ***

gdb/testsuite/ChangeLog:
2012-05-14  Sergio Durigan Junior  <sergiodj@redhat.com>

* gdb.base/stap-probe.exp (stap_test): Remove calls to
`rerun_to_main'.
(stap_test_no_debuginfo): Likewise.

Add support for PowerPC VLE.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

* NEWS:  Mention PowerPC VLE port.

2012-05-14  James Lemke <jwlemke@codesourcery.com>
    Catherine Moore  <clm@codesourcery.com>

bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
    Rhonda Wittels  <rhonda@codesourcery.com>

gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS:  Mention PowerPC VLE port.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
    Rhonda Wittels  <rhonda@codesourcery.com>

gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
    James Lemke  <jwlemke@codesourcery.com>

include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
    Rhonda Wittels  <rhonda@codesourcery.com>

include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

ld/
* NEWS:  Mention PowerPC VLE port.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
    Rhonda Wittels  <rhonda@codesourcery.com>
    Nathan Froyd <froydnj@codesourcery.com>

opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
  (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
  (BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
  (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
  (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions.  Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.

Call initialize_tdesc_x32/initialize_tdesc_x32_avx

* amd64-tdep.c: Include features/i386/x32.c and
features/i386/x32-avx.c.
(_initialize_amd64_tdep): Call initialize_tdesc_x32 and
initialize_tdesc_x32_avx.

gold/

* layout.cc (Layout::make_output_section): Mark .tdata section
as RELRO.
* testsuite/relro_test.cc: Add a TLS variable.

2012-05-14  Stan Shebs  <stan@codesourcery.com>

Add dynamic printf.
* breakpoint.h (enum bptype): New type bp_dprintf.
(struct breakpoint): New field extra_string.
(struct breakpoint_ops): Add arg to create_breakpoints_sal.
(create_breakpoint): Add extra_string arg.
* breakpoint.c (dprintf_breakpoint_ops): New.
(is_breakpoint): Add bp_dprintf.
(bpstat_what): Add dprintf case.
(bptype_string): Ditto.
(print_one_breakpoint_location): Ditto.
(init_bp_location): Ditto.
(bkpt_print_mention): Ditto.
(dprintf_style_enums): New array.
(dprintf_style): New global.
(dprintf_function): New global.
(dprintf_channel): New global.
(update_dprintf_command_list): New function.
(update_dprintf_commands): New function.
(init_breakpoint_sal): Add extra_string argument, handle it.
(create_breakpoint_sal): Add extra_string argument.
(create_breakpoints_sal): Add extra_string argument, update callers.
(find_condition_and_thread): Add extra argument.
(create_breakpoint): Add extra_string argument, record it.
(dprintf_command): New function.
(break_command_1): Add arg to create_breakpoint call.
(handle_gnu_v3_exceptions): Ditto.
(trace_command): Ditto.
(ftrace_command): Ditto.
(strace_command): Ditto.
(bkpt_print_mention): Add dprintf case.
(create_breakpoint_sal_default): Add extra_string argument.
(_initialize_breakpoint): Add new commands.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Add arg to call.
* python/py-breakpoint.c (bppy_init): Ditto.
* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.

* gdb.texinfo (Dynamic Printf): New subsection.

* gdb.base/dprintf.c: New file.
* gdb.base/dprintf.exp: New file.

Expect addend as signed

* gas/cris/rd-pic-1.d: Expect addend as signed.
* gas/cris/rd-tls-1.d: Likewise.
* gas/cris/rd-tls-2.d: Likewise.

* mips-tdep.c (mips_push_dummy_code): Correct description typo.

2012-05-14  Siva Chandra Reddy  <sivachandra@google.com>

* python/python.c (gdbpy_find_pc_line): Use ULONGEST instead of
unsigned long long.

Print addend as signed in objdump

binutils/

* objdump.c (disassemble_bytes): Print addend as signed.
(dump_reloc_set): Likewise.

gas/testsuite/

* gas/all/fwdexp.d: Expect addend as signed.
* gas/alpha/elf-reloc-1.d: Likewise.
* gas/i386/mixed-mode-reloc64.d: Likewise.
* gas/i386/reloc64.d: Likewise.
* gas/i386/ilp32/mixed-mode-reloc64.d: Expect addend as signed.
* gas/i386/ilp32/reloc64.d: Likewise.
* gas/ia64/pcrel.d: Likewise.
* gas/mips/branch-misc-2-64.d: Likewise.
* gas/mips/branch-misc-2pic-64.d: Likewise.
* gas/mips/branch-misc-4-64.d: Likewise.
* gas/mips/ldstla-n64-sym32.d: Likewise.
* gas/mips/micromips@branch-misc-2-64.d: Likewise.
* gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* gas/mips/micromips@branch-misc-4-64.d: Likewise.
* gas/mips/mips16-hilo-n32.d: Likewise.
* gas/ppc/astest.d: Likewise.
* gas/ppc/astest2.d: Likewise.
* gas/ppc/astest2_64.d: Likewise.
* gas/ppc/astest64.d: Likewise.
* gas/ppc/test1elf32.d: Likewise.
* gas/ppc/test1elf64.d: Likewise.
* gas/sparc/reloc64.d: Likewise.

2012-05-11  Hui Zhu  <hui_zhu@mentor.com>

* gdb.trace/Makefile.in (PROGS): Add disconnected-tracing.
* gdb.trace/disconnected-tracing.c: New file.
* gdb.trace/disconnected-tracing.exp: New file.

*** empty log message ***

daily update

2012-05-13  Siva Chandra Reddy  <sivachandra@google.com>

Add a new function gdb.find_pc_line to the Python API.
* NEWS (Python Scripting): Add entry about the new function.
* python/python.c (gdbpy_find_pc_line): New function which
implements gdb.find_pc_line.
(GdbMethods): Add entry for the new function.

doc/
* gdb.texinfo (Basic Python): Add description about the function
gdb.find_pc_line

testsuite/
* gdb.python/python.c: Add a new breakpoint comment.
* gdb.python/python.exp: Add tests to test gdb.find_pc_line.

ld/testsuite/
* ld-mips-elf/mips-elf.exp (mips16_call_global_test): Use the
no-shared-1.ld linker script.
* ld-mips-elf/mips16-call-global-1.s: Add alignment directive.
* ld-mips-elf/mips16-call-global-2.s: Likewise.
* ld-mips-elf/mips16-call-global-3.s: Likewise.
* ld-mips-elf/mips16-call-global.d: Use 50000 as the base address.

ld/testsuite/
* ld-mips-elf/attr-gnu-4-00.d: Remove assembler options and emulator
linker option.
* ld-mips-elf/attr-gnu-4-01.d, ld-mips-elf/attr-gnu-4-02.d,
ld-mips-elf/attr-gnu-4-03.d, ld-mips-elf/attr-gnu-4-04.d,
ld-mips-elf/attr-gnu-4-05.d, ld-mips-elf/attr-gnu-4-10.d,
ld-mips-elf/attr-gnu-4-11.d, ld-mips-elf/attr-gnu-4-12.d,
ld-mips-elf/attr-gnu-4-13.d, ld-mips-elf/attr-gnu-4-14.d,
ld-mips-elf/attr-gnu-4-15.d, ld-mips-elf/attr-gnu-4-20.d,
ld-mips-elf/attr-gnu-4-21.d, ld-mips-elf/attr-gnu-4-22.d,
ld-mips-elf/attr-gnu-4-23.d, ld-mips-elf/attr-gnu-4-24.d,
ld-mips-elf/attr-gnu-4-25.d, ld-mips-elf/attr-gnu-4-30.d,
ld-mips-elf/attr-gnu-4-31.d, ld-mips-elf/attr-gnu-4-32.d,
ld-mips-elf/attr-gnu-4-33.d, ld-mips-elf/attr-gnu-4-34.d,
ld-mips-elf/attr-gnu-4-35.d, ld-mips-elf/attr-gnu-4-40.d,
ld-mips-elf/attr-gnu-4-41.d, ld-mips-elf/attr-gnu-4-42.d,
ld-mips-elf/attr-gnu-4-43.d, ld-mips-elf/attr-gnu-4-44.d,
ld-mips-elf/attr-gnu-4-45.d, ld-mips-elf/attr-gnu-4-51.d: Likewise.

ld/testsuite/
* ld-mips-elf/eh-frame1.ld (.gcc_compiled_long32): Add KEEP.
* ld-mips-elf/eh-frame3.d: Move definition of foo to the link line
and change to a 32-bit value.  Expect CIEs to be marged.
* ld-mips-elf/eh-frame4.d: Move definition of foo to the link line.

daily update

*** empty log message ***

gdb/doc/
* gdb.texinfo (Separate Debug Files): Use plural form for global
debugging information directory.

Adjust testcases for readelf addend change

gas/testsuite/

* gas/mips/elf-rel10.d: Updated.
* gas/mips/elf-rel22.d: Likewise.
* gas/mmix/comment-1.d: Likewise.

ld/testsuite/

* ld-alpha/tlspic.rd: Updated.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlsso32.r: Likewise.
* ld-powerpc/vxworks1-lib.rd: Likewise.
* ld-s390/tlspic.rd: Likewise.
* ld-s390/tlspic_64.rd: Likewise.
* ld-sh/shared-1.d: Likewise.
* ld-sh/tlspic-2.d: Likewise.
* ld-sparc/tlssunnopic32.rd: Likewise.
* ld-sparc/tlssunnopic64.rd: Likewise.
* ld-sparc/tlssunpic32.rd: Likewise.
* ld-sparc/tlssunpic64.rd: Likewise.

Remove x32 addend overflow for BFD_RELOC_64

gas/

* config/tc-i386.c (tc_gen_reloc): Remove x32 addend overflow
for BFD_RELOC_64.

gas/testsuite/

* gas/i386/ilp32/ilp32.exp: Don't run reloc64-inval.

* gas/i386/ilp32/reloc64.s: Add test for -4294967295 addend.
* gas/i386/ilp32/reloc64.d: Updated.

* gas/i386/ilp32/reloc64-inval.l: Removed.
* gas/i386/ilp32/reloc64-inval.s: Likewise.

2012-05-12  Pedro Alves  <palves@redhat.com>

* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Call
initialize_tdesc_x32_linux and initialize_tdesc_x32_avx_linux.

 src/inferior.c: Include completer.h
 (initialize_inferiors): Set completer of add-inferior to filename_completer.

MAINTAINERS: clarify policy with config/ (and other top level files)

Rather than copy & paste more text, just merge the existing config/
section with the existing intl/ section.  This ends up clarifying
the policy with that subdir (and top level files) that any commit
made to gcc's repo is allowed to be merged with the sourceware tree
without pre-approval.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Adjust testcases for readelf addend change

* ld-cris/hiddef1.d: Updated.
* ld-cris/libdso-2.d: Likewise.
* ld-cris/tls-js1.d: Likewise.
* ld-cris/tls-local-63.d: Likewise.
* ld-cris/tls-local-64.d: Likewise.

daily update

*** empty log message ***

Check gdbarch_ptr_bit for x32 core dump

* amd64-linux-tdep.c (amd64_linux_core_read_description): Check
gdbarch_ptr_bit for x32 core dump.

Include 32-linux.c and x32-avx-linux.c

* amd64-linux-tdep.c: Include features/i386/x32-linux.c
and features/i386/x32-avx-linux.c.

2012-05-11  Stan Shebs  <stan@codesourcery.com>
    Kwok Cheung Yeung  <kcy@codesourcery.com>

* NEWS: Describe new info os commands.
* common/linux-osdata.c (PID_T, TIME_T): Define.
(MAX_PID_T_STRLEN): New.
(linux_common_core_of_thread): Add comment.  Change to use PID_T and
MAX_PID_T_STRLEN.
(command_from_pid): Add comment.  Change to use PID_T.
(commandline_from_pid):  Change to use PID_T.
(user_from_pid): Add comment.
(get_process_owner): Add comment. Change to use PID_T and
MAX_PID_T_STRLEN.
(get_number_of_cpu_cores): Add comment.
(get_cores_used_by_process): Add comment.  Change to use PID_T and
MAX_PID_T_STRLEN.
(linux_xfer_osdata_processes): Change to use PID_T and
MAX_PID_T_STRLEN.
(compare_processes): New function.
(linux_xfer_osdata_processgroups): New function.
(linux_xfer_osdata_threads): Change to use PID_T.
(linux_xfer_osdata_fds): New function.
(format_socket_state, print_sockets): New functions.
(union socket_addr): New union.
(linux_xfer_osdata_isockets): New function.
(time_from_time_t, group_from_gid): New functions.
(linux_xfer_osdata_shm): New function.
(linux_xfer_osdata_sem): New function.
(linux_xfer_osdata_msg): New function.
(linux_xfer_osdata_modules): New function.
(osdata_table): Add new entries.
* common/buffer.c (buffer_xml_printf): Add support for long and
long long format specifiers.

* gdb.texinfo (Operating System Auxiliary Information): Document new
'info os' subcommands.

* gdb.base/info-os.exp: New file.
* gdb.base/info-os.c: New file.

Declare tdesc_x32_linux/tdesc_x32_avx_linux

* amd64-linux-tdep.h (tdesc_x32_linux): New.
(tdesc_x32_avx_linux): Likewise.

gdb/doc/
* gdb.texinfo (Auto-loading, Init File in the Current Directory)
(libthread_db.so.1 file, objfile-gdb.gdb file, objfile-gdb.py file)
(dotdebug_gdb_scripts section): Add reference
to 'Auto-loading safe path'.

gdb/
Implement multi-component --with-auto-load-dir.
* NEWS (set auto-load scripts-directory, --with-auto-load-dir): New
entries.
(--with-auto-load-safe-path): Update the default value description.
* auto-load.c (auto_load_dir, set_auto_load_dir, show_auto_load_dir):
New.
(auto_load_objfile_script): Add DEBUG_AUTO_LOAD output.  Remove
GDB_DATADIR NULL check.  Replace GDB_DATADIR/auto-load by
AUTO_LOAD_DIR.  Support $ddir and multiple components in it.
(_initialize_auto_load): Initialize also auto_load_dir.  Install new
"set auto-load scripts-directory".
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (--with-auto-load-dir): New configure option.
(--auto-load-safe-path): Change the default to --with-auto-load-dir.

gdb/doc/
Implement multi-component --with-auto-load-dir.
* gdb.texinfo (Auto-loading): New references
for 'set auto-load scripts-directory'
and 'show auto-load scripts-directory'.
(Auto-loading safe path): Describe the new default.  Move $ddir
substituation reference to 'objfile-gdb.py file'.
(objfile-gdb.py file): Describe script-name alias.  Change real-name to
script-name.  Describe new 'set auto-load scripts-directory'
and 'show auto-load scripts-directory'.

* doc/binutils.texi: Add --dwarf-check option.
* dwarf.c (dwarf_check): New global flag.
(fetch_indexed_string): New function.
(fetch_indexed_value): New function.
(get_FORM_name): Add DW_FORM_GNU_str_index and DW_FORM_GNU_addr_index.
(decode_location_expression): Add DW_OP_GNU_addr_index.
(read_and_display_attr_value): Add DW_FORM_GNU_str_index,
DW_FORM_GNU_addr_index, DW_AT_GNU_addr_base, and DW_AT_GNU_ranges_base.
(get_AT_name): Add new attributes for Fission.
(process_debug_info): Load new debug sections for Fission.
(load_debug_info): Check for .debug_info.dwo section.
(display_loc_list, display_loc_list_dwo): New functions.
(display_debug_loc): Move logic to above two functions.
(display_debug_info): Choose abbrev section based on info section.
(display_debug_types): Likewise.
(display_trace_info): Likewise.
(comp_addr_base): New function.
(display_debug_addr): New function.
(display_debug_str_offsets): New function.
(display_debug_ranges): Allow missing range lists.  Suppress
diagnostics if dwarf_check not set.
(debug_displays): Add column to select abbrev section.
* dwarf.h (enum dwarf_section_display_enum): Add new debug sections
for Fission.
(struct dwarf_section): Add abbrev_sec field.
(struct dwarf_section_display): New type.
(debug_info): Add addr_base, ranges_base fields.
(dwarf_check): New global variable.
* objdump.c (usage): Add --dwarf-check option.
(enum option_values): Add OPTION_DWARF_CHECK.
(long_options): Add --dwarf-check.
(main): Likewise.
* readelf.c (OPTION_DWARF_CHECK): New macro.
(options): Add --dwarf-check.
(parse_args): Likewise.
(process_section_headers): Use const_strneq instead of
streq.

gdb/
Provide $ddir substitution for --with-auto-load-safe-path.
* NEWS (--with-auto-load-safe-path, --without-auto-load-safe-path): New
entries.
* auto-load.c: Include observer.h.
(auto_load_safe_path_vec_update): Call substitute_path_component for
each component.  New variable ddir_subst.
(auto_load_gdb_datadir_changed): New function.
(set_auto_load_safe_path): Rename DEFAULT_AUTO_LOAD_SAFE_PATH to
AUTO_LOAD_SAFE_PATH.  New comment.
(_initialize_auto_load): Rename DEFAULT_AUTO_LOAD_SAFE_PATH to
AUTO_LOAD_SAFE_PATH.  Install auto_load_gdb_datadir_changed.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (--auto-load-safe-path): Rename
DEFAULT_AUTO_LOAD_SAFE_PATH to AUTO_LOAD_SAFE_PATH.  Default to
GDB_DATADIR/auto-load.
* defs.h (substitute_path_component): New declaration.
* top.c: Include observer.h.
(set_gdb_datadir): New function.
(init_main): Install it for "set data-directory".
* utils.c (substitute_path_component): New function.

gdb/doc/
Provide $ddir substitution for --with-auto-load-safe-path.
* gdb.texinfo (Auto-loading): Replace /usr/local by $ddir/auto-load.
(Auto-loading safe path): Likewise.  Mention the default value,
$ddir substitution, --with-auto-load-safe-path and
--without-auto-load-safe-path.
* observer.texi (gdb_datadir_changed): New.

gdb/
Make auto-load handle multiple components of DEBUG_FILE_DIRECTORY.
* auto-load.c (auto_load_objfile_script): Remove check for NULL
DEBUG_FILE_DIRECTORY.  Handle multiple components of
DEBUG_FILE_DIRECTORY.

Always display addend as signed hex number

binutils/

PR binutils/14088
* readelf.c (dump_relocations): Always display addend as
signed hex number.

ld/testsuite/

PR binutils/14088
* ld-ia64/tlspic.rd: Updated.
* ld-x86-64/tlsdesc-nacl.rd: Likewise.
* ld-x86-64/tlsdesc.rd: Likewise.
* ld-x86-64/tlspic-nacl.rd: Likewise.
* ld-x86-64/tlspic.rd: Likewise.

PR binutils/14028
* configure.in: Invoke ACX_HEADER_STRING.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: If STRINGS_WITH_STRING is defined then include both
string.h and strings.h.

2012-05-11  Yao Qi  <yao@codesourcery.com>
    Pedro Alves  <palves@redhat.com>

* linux-low.c (enum stopping_threads_kind): New.
(stopping_threads): Change type to `enum stopping_threads_kind'.
(handle_extended_wait): If stopping and suspending threads, leave
the new_lwp suspended too.
(linux_wait_for_event): Adjust.
(stop_all_lwps): Set `stopping_threads' to
STOPPING_AND_SUSPENDING_THREADS or STOPPING_THREADS depending on
whether we're suspending threads or just stopping them.  Assert no
recursion happens.

PR 13503
* reloc.c: Add new ENUM for BFD_RELOC_AVR_8_LO,
BFD_RELOC_AVR_8_HI, BFD_RELOC_AVR_8_HHI.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenrate.
* elf32-avr.c (elf_avr_howto_table): Add entries for
R_AVR_8_LO8, R_AVR_8_HI8, R_AVR_8_HHI8.
(avr_reloc_map): Add RELOC mappings for R_AVR_8_LO8, R_AVR_8_HI8,
R_AVR_8_HHI8.

* config/tc-avr.c (exp_mod_pm): Remove variable.
(exp_mod_data_t): New typedef.
(pexp_mod_data, exp_mod_data): New variables.
(avr_parse_cons_expression): Scan through exp_mod_data[] to find
data expression modifiers "pm", "gs", "lo8", hi8", "hhi8", "hh8"
and set pexp_mod_data accordingly to be used in avr_cons_fix_new.
(avr_cons_fix_new): Handle new data expression modifiers shipped
in pexp_mod_data.
(md_apply_fix): Handle BFD_RELOC_AVR_8_LO, BFD_RELOC_AVR_8_HI,
BFD_RELOC_AVR_8_HHI.

* elf/avr.h (RELOC_NUMBERS): Add values for R_AVR_8_LO8,
R_AVR_8_HI8, R_AVR_8_HHI8.

Handle R_X86_64_64 properly for x32

elfcpp/

PR gold/14091
* x86_64.h (R_X86_64_RELATIVE64): New.

gold/

PR gold/14091
* x86_64.cc (Target_x86_64::Scan::local): For x32, generate
R_X86_64_RELATIVE64 instead of R_X86_64_RELATIVE in case of
R_X86_64_64.

PR binutils/14006
* arm-dis.c (print_insn): Fix detection of instruction mode in
files containing multiple executable sections.

Use int and bfd_signed_vma in x32 addend overflow check

bfd/

* elf64-x86-64.c (elf_x86_64_relocate_section): Use int in x32
addend overflow check.

gas/

* config/tc-i386.c (tc_gen_reloc): Use bfd_signed_vma in x32
addend overflow check.

* elf32-rx.c (rx_elf_object_p): Ignore empty segments.

daily update

*** empty log message ***

Display signed hex number in x32 addend overflow check

bfd/

* elf64-x86-64.c (elf_x86_64_relocate_section): Display signed
hex number in x32 addend overflow check.

gas/

* config/tc-i386.c (tc_gen_reloc): Display signed hex number in
x32 addend overflow check.

ld/testsuite/

* ld-x86-64/ilp32-11.d: Updated.

* dwarf2read.c (recursively_write_psymbols): New function.
(write_psymtabs_to_index): Use it.

* dwarf2read.c (struct dwarf2_queue_item) <pretend_language>: New
field.
(load_cu, dw2_do_instantiate_symtab, process_psymtab_comp_unit)
(load_partial_comp_unit): Update.
(queue_comp_unit): Add argument 'pretend_language'.
(process_queue): Update.
(psymtab_to_symtab_1): Skip dependencies that have a user.
(load_partial_comp_unit_reader): Give meaning to the 'data'
argument.
(load_full_comp_unit): Add 'pretend_language' argument.
(process_full_comp_unit): Add 'pretend_language' argument.  Set
language on CU.
(process_imported_unit_die, read_file_scope, read_type_unit_scope):
Update.
(maybe_queue_comp_unit): Add 'pretend_language' argument.
(follow_die_offset, follow_die_sig, read_signatured_type_reader):
Update.
(prepare_one_comp_unit): Add 'pretend_language' argument.

* dwarf2read.c: (dwarf2_per_cu_ptr): New typedef.
(struct dwarf2_per_objfile) <just_read_cus>: New field.
(struct dwarf2_per_cu_data) <imported_symtabs>: New field.
(dw2_do_instantiate_symtab): Check whether symtab was read in
before queueing.
(dw2_instantiate_symtab): Add assertion.  Call
process_cu_includes.
(process_psymtab_comp_unit): Compute 'dependencies' for psymtab.
(partial_symtab_p): New typedef.
(set_partial_user): New function.
(dwarf2_build_psymtabs_hard): Use set_partial_user.
(scan_partial_symbols): Add imported CU to imported_symtabs.
(dwarf2_psymtab_to_symtab): Call process_cu_includes.
(psymtab_to_symtab_1): Do nothing if psymtab is readin.
(get_symtab, recursively_compute_inclusions)
(compute_symtab_includes, process_cu_includes)
(process_imported_unit_die): New functions.
(process_die) <DW_TAG_imported_unit>: New case.
(dwarf2_per_objfile_free): Free 'imported_symtabs'.

* dwarf2read.c (struct dwarf2_per_cu_data) <psymtab>: Update
comment.
(struct partial_die_info) <locdesc>: Remove.
<d>: New field.
(process_psymtab_comp_unit): Add 'read_partial' argument.
Update.
(process_type_comp_unit, dwarf2_build_psymtabs_hard): Update.
(scan_partial_symbols): Handle DW_TAG_imported_unit.
(add_partial_symbol): Update.
(process_die): Handle DW_TAG_partial_unit.
(read_file_scope): Update comment.
(load_partial_dies): Handle DW_TAG_imported_unit.
(read_partial_die): Handle DW_TAG_partial_unit, DW_AT_import.
(determine_prefix, dwarf2_name): Handle DW_TAG_partial_unit.

* cc-with-dwz.sh: New file.

* symtab.h (struct symtab) <includes, user>: New fields.
* block.h (struct block_iterator) <d, idx, which>: New fields.
* block.c (initialize_block_iterator, find_iterator_symtab)
(block_iterator_step, block_iter_name_step)
(block_iter_match_step): New functions.
(block_iterator_first, block_iterator_next)
(block_iter_name_first, block_iter_name_next)
(block_iter_match_first, block_iter_match_next): Rewrite.
(get_block_symtab): New function.

* jv-lang.c (get_java_class_symtab): Use allocate_global_block,
set_block_symtab.
* jit.c (finalize_symtab): Use allocate_global_block,
set_block_symtab.
* buildsym.c (finish_block_internal): New function, from old
finish_block.
(finish_block): Rewrite.
(end_symtab): Use finish_block_internal, set_block_symtab.
* block.h (struct global_block): New.
(allocate_global_block, set_block_symtab): Declare.
* block.c (allocate_global_block, set_block_symtab): New
functions.

* psymtab.c (partial_map_expand_apply): Add assertion.
(partial_map_symtabs_matching_filename): Skip included psymtabs.
(psymtab_to_symtab): Find unshared psymtab.
(dump_psymtab): Print including psymtabs.
(recursively_search_psymtabs): New function.
(expand_symtabs_matching_via_partial): Use it.
* psympriv.h (struct partial_symtab) <user, searched_flag>: New
fields.
(enum psymtab_search_status): New.

* tracepoint.c (scope_info): Update.
* symtab.c (lookup_block_symbol, iterate_over_symbols)
(find_pc_sect_symtab, search_symbols)
(default_make_symbol_completion_list_break_on)
(make_file_symbol_completion_list): Update.
* symmisc.c (dump_symtab_1): Update.
* stack.c (print_frame_args, iterate_over_block_locals)
(print_frame_labels, iterate_over_block_arg_vars): Update.
* python/py-block.c (block_object) <dict>: Remove.
<block>: New field.
<iter>: Change type.
(blpy_iter): Update.
(blpy_block_syms_iternext): Update.
* psymtab.c (map_block): Use block iterators.
* objfiles.c (objfile_relocate1): Use ALL_DICT_SYMBOLS.
* mi/mi-cmd-stack.c (list_args_or_locals): Update.
* mdebugread.c (parse_symbol, mylookup_symbol): Update.
* infrun.c (check_exception_resume): Update.
* cp-support.c (make_symbol_overload_list_block): Update.
* coffread.c (patch_opaque_types): Update.
* buildsym.c (finish_block, end_symtab): Use ALL_DICT_SYMBOLS.
* block.h (struct block_iterator): New.
(block_iterator_first, block_iterator_next, block_iter_name_first)
(block_iter_name_next, block_iter_match_first)
(block_iter_match_next): Declare.
(ALL_BLOCK_SYMBOLS): Redefine.
* block.c (block_iterator_first, block_iterator_next)
(block_iter_name_first, block_iter_name_next)
(block_iter_match_first, block_iter_match_next): New functions.
* ada-lang.c (ada_add_block_symbols)
(ada_make_symbol_completion_list): Use block iterator.