lib/oeqa/runtime: ping: fix ping false fail

We run the ping test as soon as we reach the login prompt.
But sometimes (seen in sato systemd) we end up with link down/link up stuff like:

    qemux86-64 login: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

The logic behind ping -w 30 -c 1 was to wait at most 30 seconds
for at least one reply,  but there is a catch: reply doesn't seems
to be echo reply but any reply (non-reply means loss not network error)
ping's man page:
    -w deadline
              Specify  a  timeout, in seconds, before ping exits regardless of
              how many packets have been sent or received. In this  case  ping
              does  not  stop after count packet are sent, it waits either for
              deadline expire or until count probes are answered or  for  some
              error notification from network.

Just when the link up/link down happens ping returns:
    From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
    --- 192.168.7.2 ping statistics ---
    1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms

and exits sooner than the 30 seconds timeout.

This patch should do what was originally intended (wait at most
30 seconds for at least one reply).

(From OE-Core rev: 56d144fd22d37189e49cdf3032afb00f0be469c6)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python: Backport 2 CVE from upstream

These are back ports of 2 patches from upstream to address
CVE-2011-4944
CVE-2013-4238

(From OE-Core rev: 4606eab53e8eff57d6369ea20a5ea63916ea3ea7)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

perl: Backport 2 CVE Patches

These patches are backported from upstream since it might be risky to update right now
They address the following CVEs

CVE-2012-6329
CVE-2013-1667

(From OE-Core rev: b6c286c447e50fe499f03b64c6be80ac18504265)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

btrfs-tools: Add dependency on lzo acl e2fsprogs

Add dependency on lzo acl e2fsprogs to fix the below building failure
1. commit b268a417259b9[add lzo compression support to restore] needs lzo
cmds-restore.c:30:25: fatal error: lzo/lzoconf.h: No such file or directory

2. btrfs-tools includes <sys/acl.h> which is provided by acl
btrfs-convert.c:32:21: fatal error: sys/acl.h: No such file or directory

3. btrfs-tools always needs e2fsprogs
btrfs-convert.c:44:28: fatal error: ext2fs/ext2_fs.h: No such file or directory

(From OE-Core rev: 51bb56a19f03e341a0b46199dddbbc3e9b209904)

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: use /bin/mkdir instead of host mkdir path

(From OE-Core rev: 9ee883f2f9f36f6d5cca56ac5f179468dfa5b686)

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gcc-4.8: fix ICE of cross-compile for PowerPC e500v2 targets

  * http://gcc.gnu.org/bugzilla//show_bug.cgi?id=57717#c7

  * fix the segfault issue of dd on e500v2 targets
    Since double-float is disabled for e500v2 targets build due to ICE of gcc-4.8.1,
    accordingly %Ld format of sprintf is disabled.
    Address Bug 4910 - [p1022ds]urandom: segmentation fault

(From OE-Core rev: a4fefac26d91bc56d5d28e1c9973a189d2509d45)

Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libsamplerate0: add PACKAGECONFIG for fftw

fftw is autodetected from sysroot, add PACKAGECONFIG to make it deterministic

(From OE-Core rev: 5e00319ea942764ed2e7d6bc8c74e5d48166231b)

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

mesa: add missing elfutils dependency for r600 PACKAGECONFIG

Fixes the following configure error:
configure:23490: error: radeonsi and r600g require libelf when using LLVM

(From OE-Core rev: 43e7f168c84128b5d48bbfde9d6c07f2fb656b00)

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bluez4: fix network Connect parameter validation

The incorrect validation prevents connection to the NAP service on another
device.

(From OE-Core rev: 895a0840e82ddfd05c4441b7f8f358e27e6cb38a)

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

multilib.bbclass: Expand the WHITELISTs with multilib prefix

fix the following failures:
ERROR: Nothing PROVIDES 'virtual/lib32-i586-pokymllib32-linux-compilerlibs'
ERROR: Nothing RPROVIDES 'lib32-update-alternatives-cworth'

(From OE-Core rev: a27d5b08d438861309827aecb731c29218679730)

Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oe-setup-rpmrepo: add native sysroot so nativepython can be found by env

This avoids the following new behavior resulting from the create_wrapper
fixes:

  llc[11]$ ../poky/scripts/oe-setup-rpmrepo
  /usr/bin/env: nativepython: No such file or directory

(From OE-Core rev: ce37ef05c14ba28773823d1f14f629c37c76d827)

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: prserv: Allow 'table is locked' matching for retry loop

Try and avoid errors like "ERROR: database table is locked: PRMAIN_nohist"
by retrying if we see the string "is locked".

(Bitbake rev: 1a175b51f80d13f747b653d29e9c0d2201b5109c)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: server/xmlrpc: Increase timeout to 60s

This is a better value that the earlier infinite timeout yet still
allows for servers with high loads. It does mean the bitbake process
can hang at exit for the timeout period but that should never happen
and only happened for me in some test cases which wouldn't happen
in normal use.

(Bitbake rev: ab8d926b9bc27c58011e7db9327e031ac76ba34b)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: cookerdata: Allow bblayers.conf to be found using BBPATH

It should be possible to run a build anywhere on the filesystem and have
bitbake find the correct build directory if its set somehow. The BBPATH
variable makes perfect sense for this usage. Therefore use any available
value of BBPATH to search for conf/bblayers.conf before walking the parent
directory structure.

This restores the option of being able to run bitbake from anywhere if
the user has set things up to operate in that environment.

(Bitbake rev: e86336b3fe245bc97fe74c9b9d6a21d38a536fb7)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: cookerdata: Set TOPDIR when using bblayers.conf

By definition, bblayers.conf is at the top of the build tree. We'd like
to support running bitbake anywhere within that build tree but TOPDIR
gets set to wherever cwd is. Change the code to reset TOPDIR
to the top of the build directory.

This shouldn't break anything but does make the system more usable.

(Bitbake rev: b266db27de0bba19a418e4d42e870649136b116b)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

web-webkit: Drop, we have midori now

This was never a particularly useful browser and is a dead codebase, retire
it and suggest midori instead.

[YOCTO #2318]

(From OE-Core rev: 3883d2cb03fb79fa39a7d85505c79784a996f178)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

runqemu-ifdown: clean up the remaining iptables rules

The iptables rules for the tap interface are added by runqemu-ifup
everytime we use runqemu to start a qemu target. But it's not cleaned
up when runqemu exits.

This patch cleans up the remaining iptables rules for the tap interface
in runqemu-ifdown.

[YOCTO #5047]

(From OE-Core rev: ef38a0aed35357d035ca587162158cd2f55b958f)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

runqemu-internal: provide more info if a preconfigured tap is used

We should provide the user more information if a preconfigured tap
is used. This is because the user might have manually set up the tap
interface to be used by other qemu binaries.

So at a minimum, we should let the user know how to make runqemu skip
that tap interface.

[YOCTO #5047]

(From OE-Core rev: ec08d92641cc51c567cc3745937b1839d3faa095)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

runqemu-internal: don't bring down preconfigured tap interface

runqemu-ifup and runqemu-ifdown should be pairs. If we're using a
preconfigured tap interface, the runqemu-ifdown should not be invoked
to bring it down.

(From OE-Core rev: f60f215f74b5fe5a43943c9d3ccdbe0fa06b7828)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: syslog: fix test for logger in case of systemd

Recently syslog behaviour changed for systemd images (log
it's in a buffer not in /var/log/messages), account
for the new stuff.

(From OE-Core rev: 32576c4cc1621fa3013eac66c7caaa1e1fd14995)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

list-packageconfig-flags.py: fix searching bitbake module failed

Run list-packageconfig-flags.py on wrlinux's platform in which
the oe-core layer and bitbake layer in different directories:
----
../layers/oe-core/scripts/contrib/list-packageconfig-flags.py
Traceback (most recent call last):
  File "../layers/oe-core/scripts/contrib/list-packageconfig-flags.py", line 28, in <module>
    import bb.cache
ImportError: No module named bb.cache
----

The script import bb module from bitbake lib dir, the previous
lib dir was hardcode and only worked on poky but not for others.

In this situation, look for bitbake/bin dir in PATH could fix this issue.

[YOCTO #5060]

(From OE-Core rev: 9e749c430f97b1a30cdf0c13dacd2a985ef7b433)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk+3: pull forward the gtk+2 hardcoded libtool patch

Without this, it tries to run ./libtool, not the sys-prefixed libtool, which
fails, resulting in dynamic modules being disabled, which in turn results in
compiling the immodules directly into the gtk+3 library.

I tried switching it to using $LIBTOOL rather than hardcoding the path, as
LT_INIT sets LIBTOOL, but it didn't work, I didn't have time to dig further,
and this gets the job done for now.

(From OE-Core rev: f74e456772fc80c2333fbdf57c629a18412375e8)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk+3: only set GTKIMMODULES_PACKAGES if we have immodules

(From OE-Core rev: 9191c8b08ea25641d228acc83f2d4ad6a14333fe)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/utils: qemurunner: fix when runqemu errors out

When qemu doesn't start or runqemu errors out
(some wrong option passed or sudo needs a password for setting tap) we
want to display the output but oe-core commit 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b/
poky commit 51588936d4a8cde3c9bb05800240c0a0f5dedf8d
changed the kill method and broke this code, so let's fix it.

(From OE-Core rev: 923d4bd548911caa0b419c10905895af1e8e7026)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lttng-ust: Update to version 2.2.1

Update lttng-ust to version 2.2.1 to correspond to the LTTng 2.2
"Cuda" - Tracer toolchain stable release.

This also removes all the local lttng-ust patches, which are now
upstream.

(From OE-Core rev: 3f856556972617560b24cc86bfab027bed83bd49)

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lttng-tools: Update to version 2.2.3

Update lttng-tools to version 2.2.3 to correspond to the LTTng 2.2
"Cuda" - Tracer toolchain stable release.

(From OE-Core rev: 303abf7f2d8e79e8d14ce5b9aff287347aae43be)

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

util-linux: package mkfs.cramfs and fsck.cramfs

The recipe builds the two utils which are unpackaged.

(From OE-Core rev: a8212a5170940b9ba9ca7a594b65939b06aac86c)

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image_types.bbclass: use mkfs.cramfs instead of makecramfs

The former is provided by util-linux and the latter is
now to be removed for meta-filesystems.

This allows to generate cramfs images whithout extra layers.

(From OE-Core rev: 451546a9d2f675ac331f72f4e66317685d931aba)

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

busybox: configure system user id to range from 100 to 999

Previously, the range was 0 to 0. This made it impossible to use
busybox's adduser utility to add a system user. The following error
would appear.

      adduser: no uids left

This patch fixes this problem by giving it a reasonable range.

(From OE-Core rev: c4555007d04ccacbc192827b70a97f9a48500a22)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-self-hosted: Add missing python code

These are in the Toolchain list, so they should also be installed on the build appliance

[YOCTO #5061]

(From OE-Core rev: 82374feece5c576f9950bad6861b1e00c6b30d84)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

build-appliance-image: upgrade to commit 5745e45b18e5099e94b4d5a73bc97dc6d4cdc91f

Improvements to poky gets in this way
reflected in Build Appliance.

Notable improvements/fixes to bitbake.
New hardware targets.

(From OE-Core rev: ced23e66ad3c255fdccfba24301c99cb60832cff)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

remove the unnecessary protocol parameters

It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.

(From OE-Core rev: a2bab241c64428d5109c3c5ac5de4463fbad70c5)

Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

builder: register html links and files with Midori

HTML files and links will open in a tab in Midori.

[YOCTO #3506]

(From OE-Core rev: 1177aee9a6761a6a46a6213f7c4d35827ea54022)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-self-hosted: integrate midori

Integrate the Midori web browser in Build Appliance. This will allow the
users to get help and file a bug from Hob in Build Appliance.

[YOCTO #3506]

(From OE-Core rev: 18109cf0c71cbd3b77bcf133996774abe4bbccae)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa: move skeletoninit.py where it belongs

OE-core commit fcc59cbcdb1550489d372edf9f465efa7165245f /
poky commit 748ddc39e56623f4e48987f0467f4722f6e162f2 added a new test, but
in the wrong location.
I took the patch from Alex's branch but renamed it from meta/lib/oeqa/runtime/skeleton.py to meta/lib/oeqa/skeletoninit.py before sending. This was
unintentional, it should have been under meta/lib/oeqa/runtime.

(From OE-Core rev: f12c346ef48cb44be2e356e4cf4f28d015c3f507)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libnfsidmap: Add and modify idmapd.conf

add configuration file to make rpc.idmapd to not report below error:
rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
rpc.idmapd: Could not find group "nobody"

(From OE-Core rev: 6ecd6fb730f473fb90cefd7d0b431d5b8d2c05f7)

Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

busybox: set default log buffer size to 64 at compile time

This provides a more reasonable log buffer size to avoid losing earlier
events, and 64K is not a problem for modern systems. When the buffer is
used on sysvinit-based systems, which it isn't by default, 64K is already
the runtime default size unless /etc/syslog-startup.conf is modified or
deleted, so this only really affects systems using systemd. This
completely removes the need for the busybox bbappend in meta-oe.

(From OE-Core rev: 6d6a3f805b0fad6f904afb52dc12bfb543e3eec5)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

buildtools-tarball: Add python-pkgutil

This is needed by some recently added automated QA tests so we should add it
to the buildtools tarball.

(From OE-Core rev: 7d93288117e7054472d8a01dde0b38bc0ff98c27)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: prserv/serv: Multithread the server

This makes the PR server multithreaded and able to handle multiple connections
at once which means its no longer a build bottle neck when serving one connection
at a time. I've experimented and database connection for each thread seems to
cause the least issues, pushing the contention for sqllite to handle itself.

This means moving the db/table connection code into the actual function methods.
It doesn't abstract well as a function since we need the db object around for
the lifetime of the function as well as the table else we lose the connection.

(Bitbake rev: bf9be2029b2bded5f532bdda4c38ae3dff5d1cf6)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: prserv/db: Threading fixes

Enabling threading for the PRServer causes a number of issues. Firstly is
the obtuse error:

sqlite3.InterfaceError: Error binding parameter 0 - probably unsupported type

which is due to the class not being derived from object. See:
http://docs.python.org/2/library/sqlite3.html#registering-an-adapter-callable

Secondly, we want to enable multithreadded access to the database so we do this
when we open it. This opens the way up to multithreading the PR server.

(Bitbake rev: 5709efc2ff1e36529bd28f49cd093ccfa7abff7f)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/testimage: add support for finding tests in other layers

A layer can add tests in lib/oeqa/runtime (provided it extends BBPATH as
normal) and enable them with TEST_SUITES_append = " testname". Test
module names shouldn't collide though.

(From OE-Core rev: e1e347a2d509303e1c566450b0f2b485d3d6629f)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/testimage: increase default boot timeout

While I can't reproduce on local builds, sometimes images fail
to boot on AB (which runs many builds at once). Assuming
there isn't something weird going on, let's just give it more time.

(From OE-Core rev: db38e10701cd2392a57e559573b715fd6daf6e2a)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: remove some unnecessary checks from setUpModule

These checks are unnecessary.
setUpModule is run when a module is loaded and we
shouldn't run commands on the target here, (plus if
ssh doesn't work we error out in setup multiple times, instead
of skipping the real test, which might depend on test_ssh).

(From OE-Core rev: 188acd0a75e188fd7c0d2979acaf13fd18b12106)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.4: v3.4.59, mohonpeak

This is a standard refresh of the 3.4 LTSI kernel to include v3.4.59 and to
introduce the updated mohonpeak BSP.

Build and boot testing on qemu showed no issues.

(From OE-Core rev: 3f8d61517d31c3351a45f95adbd81e1c0147b98e)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: fix ssh login and restore CC_OPTIMIZE_FOR_SIZE

Updating the BSP SRCREVs with the following changes:

  7144bcc Revert "timer_list: Split timer_list_show_tickdevices"
  1c0d1d8 Revert "timer_list: Convert timer list to be a proper seq_file"

To temporarily fix the ability to log in via ssh on some host/image combinations.

Updating the meta SRCREV for:

  cd502a8 meta/standard: standard configuration fragment must be first

Which was incorrectly overriding feature and arch configuration values.

[YOCTO #5064]
[YOCTO #5062]

(From OE-Core rev: 3bfe8aa750f88efad7e87185b8eff8c03418efd4)

Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

midori: use BPN instead of PN

Otherwise multilib builds break as the SRC_URI becomes invalid.

(From OE-Core rev: 82c6ab123fafa2acc3d437328a7ca856dfd078d6)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: serv.py: Fix regression from 972bc43e6d5b

commit 972bc43e6d5b1207b944b3baa8f9805adb35dda7 (serv.py: Fix hang
when spawned dynamically with bitbake) introduced a regression,
because the wrong patch was submitted.  The syntax was incorrect in
the original patch.  The logger iterator must be used with a call to
getLogger().

[YOCTO #5059]

(Bitbake rev: 85fed8acc3af3e15bf119db2f51c486a9de3646b)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

midori: add version 0.5.5 from meta-gnome

Midori is a lightweight web browser that uses the WebKit
rendering engine and the GTK interface. This allows a more
easy testing of the functionality of webkit-gtk component
that is already in oe-core.

(From OE-Core rev: 88d9d7e47dedd9bfa26da860e6ff77ee5206d9e8)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-docutils: add version 0.11 from meta-oe

Docutils is a text processing system for processing plaintext
documentation into useful formats(HTML, XML, man-pages). This is
required by the Midori web-browser.

* Update 0.5 from meta-oe to 0.11.

(From OE-Core rev: 1bc1ff887c29376bb0d05beee1bbc2cf25b08419)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libnotify: add version 0.6.0 from meta-gnome

Libnotify is a library that can be used to send
desktop notifications to a daemon. It's required
by the Midori web-browser.

(From OE-Core rev: f72c0ff46d6895978e7e5230cb882d8eee4005ba)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

vala.bbclass: add class from meta-oe

This can be used by packages written in vala.
It is required by the Midori web-browser.

(From OE-Core rev: 807285c751862aaa775db5a13293007bfb3c29df)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

vala: add version 0.16 from meta-oe

Vala is a C#-like language dedicated to ease GObject programming.
It is required by the Midori web-browser.

(From OE-Core rev: 649b48557d8702daaf4f28482848ab0b07abed83)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dpkg: fix configuration issue for mips64

CQID: 431771

configure cannot determine the proper cpu, os, or
architecture for mips64, and possibly other arch's,
because of faulty code added to Arch.pm in the latest
release from upstream.  We remove that code.

(From OE-Core rev: e56b4af3a325d6d5332c779e6253da9b3cd2fce0)

Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: Upgrade to 206

Add new PACKAGE systemd-rpm-macros, this will hold
the macros which are interesting when rpm is used as
package management backend

Forward port uclibc only patches. Add a new patch
to stub out use of preadv/pwritev in testcases

Delete patches that have been merged upstream in systemd

Remove force export of GPERF variable in environment
this was causing AC_CHECK_TOOL to not populate GPERF
variable as expected

systemd needs kmod to be present on rootfs so add it
to RDEPENDS

some services substitute discovered kmod when the service
file is generated during boot, however the discovered kmod
is from native sysroot and it gets into the service file
with absolute path. So specify the target path of kmod using
KMOD variable so the unit files have correct pointer to kmod
on target

Add a patch to make sure that mknod capability is checked
before the service which excercise mknod, this patch is also
submitted to upstream systemd

(From OE-Core rev: 3f1788f8edf18a292cb5d8e16a2a98a19ec89239)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kmod: Upgrade to version 14

The update is a requirement for systemd-206

(From OE-Core rev: faacfeb7cb7bed9ad5eb387d358309a2b1d40f06)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: data_smart: allow removal of multiple words at once with _remove

    FOO = "foo bar baz"
    FOO_remove = "foo baz"

(Bitbake rev: 04127dec207d6dfc0ada56c5cc67ec9ad30517a8)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: data_smart: use a split/filter/rejoin for _remove

This is more idiomatic, and from the limited performance testing I did, is
faster as well. See https://gist.github.com/kergoth/6360248 for the naive
benchmark.

(Bitbake rev: 1aa49226d5a2bac911feeb90e3d9f19529bc1a3e)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: serv.py: Fix hang when spawned dynamically with bitbake

The PRServer has the possibility to hang indefinitely blocking on a
semaphore processing a xmlrpc request to send an event back to the
main bitbake instance.  This was observed during a "bitbake -e" on a
heavily loaded machine and the main bitbake instance and cooker exited
before the PRServer emitted its first log.

The stack trace is provided below as to show what happens every time a
logger.info() is executed in the PRServer.  Not only does it write to
the stream handler but it also tries to send the event to the main
event processor.

    self._notempty.acquire()
    self.queue.put(event)
    _ui_handlers[h].event.send(event)
    fire_ui_handlers(event, d)
    fire(record, None)
    self.emit(record)
    hdlr.handle(record)
    self.callHandlers(record)
    self.handle(record)
    self._log(INFO, msg, args, **kwargs)
    (self.dbfile, self.host, self.port, str(os.getpid())))
    self.work_forever()
    pid = self.daemonize()
    self.prserv.start()
    singleton.start()
    self.prhost = prserv.serv.auto_start(self.data)
    cooker.pre_serve()
    bb.cooker.server_main(self.cooker, self.main)
    self.run()
    code = process_obj._bootstrap()
    self._popen = Popen(self)
    self.serverImpl.start()
    server.detach()
    server = start_server(servermodule, configParams, configuration)
    ret = main()

It was never intended for the PRServer to send its logs anywhere but
its own log file.  The event processing is an artifact of how the
PRServer was forked and it inherits the event log handlers.  The
simple fix is to clean up and purge all the log handlers after the
fork() but before doing any of the typical PRServer work or logging.

(Bitbake rev: 972bc43e6d5b1207b944b3baa8f9805adb35dda7)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto-rt: add qemumips and qemuppc to COMPATIBLE_MACHINES

3.10-rt boots and has good cyclictest results on qemuppc and qemumips,
so we can now safely add them into COMPATIBLE_MACHINES.

(From OE-Core rev: 9dd21e4baf0d6220c2f751e62f417b73c6474759)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gcc-4.8.inc: Allow lto to be configurable

For some platforms its useful to be able to configure LTO so provide a variable
to allow this to happen.

(From OE-Core rev: e4582a51a2500ad3b418e53170f5fb6b2cbd98a5)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

perf: Ensure we general PIC code to avoid build failures

Without this we see relocation errors on mips with 3.10. This should be
safe to be included in general.

(From OE-Core rev: 9958653b2bf9e43312a39c6b89ff0ca1cc46995c)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: hob: fixes for image combo box

When an image from scratch is selected, and recipes parsing
is canceled, the image shown by the combo box isn't correct.

[YOCTO #5000]
(Bitbake rev: f8166ace0bd9155199166990ce15da24eb2e793b)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: hob: add event handlers filtering in Hob

Create the _evt_list for hob; it is longer than the knotty
uses because it handles more events.

(Bitbake rev: 715aed74f972bb6e9b6a5130ca9ede48d4f79f0a)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake/event.py: UIhandler filter should work without a mask

The default for the mask will be * (all the handlers)

(Bitbake rev: 4c95e5f46cf2a656100bbf5a0e5a09d506abf9b9)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lttng-modules: Update to 2.2.1 based release

(From OE-Core rev: 8792f38de43b391896c2eccb8086538eb3f6c47b)

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

README.hardware: Replace atom-pc with genericx86

Update README.hardware to reflect the recent replacement of
atom-pc with genericx86.

(From meta-yocto rev: 632d92087cebb11ff9cb0110f9dae01d04bdd83b)

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto: add bc-native dependency, and move to linux-yocto.inc

As reported by Martin Jansa <martin.jansa@gmail.com>, the following error happens
when building in a minimal environment:

   |   BC      kernel/timeconst.h
   | /bin/sh: bc: command not found
   | make[3]: *** [kernel/timeconst.h] Error 127
   | make[2]: *** [kernel] Error 2
   | make[2]: *** Waiting for unfinished jobs....

kernel commit 70730bca [kernel: Replace timeconst.pl with a bc script] added
a kernel dependency on bc. To support the build of linux-yocto recipes in
these configurations, we add bc-native to the common dependencies.

(From OE-Core rev: c888857b060f04b8689f393ec2d77a950da40f5a)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kern-tools: fix patch series to git tree validation

Previous changes to the kern-tools improved functionality to ensure that
as a series is considered, it is checked against the tree to confirm that
all patches are really applied.

There was a bug in the subject based detection, such that the first matching
patch was take, and not the last. This change ensures that we start from
the end of a series, not the start.

(From OE-Core rev: 6357657ec5b5687defaf1acdd94c1cf89aa06541)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bc: add bc-native

To support the building of recent kernels in minimal environments, we should
provide bc-native.

(From OE-Core rev: 2138961cc75be2690f2f9b5df8cb2d810dcebc99)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: smart: add checks for smart output

Sometimes smart throws:

    Committing transaction...
    Preparing...                    ######################################## [  0%]
       1:Removing psplash-default   ######################################## [100%]
    error: Couldn't fork %postun: Cannot allocate memory

and returns a 0 exit code (it thinks it succesfully removed the package,
when in reality it didn't), so we need to catch those specifically.

Also, sometimes output from download command is:
    Saving cache...http://192.168.7.1:49456/rpm/x86_64_x32/psplash-default-0.1+git0+afd4e228c6-r15.x86_64_x32.rpm
and that tricks our smart download test, so use a regex there.

(From OE-Core rev: 2ac7783e04f5e8e6005f967e1a6dd65d2fc6a19a)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: multilib: fix typo

The check was obviously wrong and it surfaced
with the recent change in behaviour for skipping tests.

(From OE-Core rev: 4a14535cd493cb2bdd46b2a5f2a1cd2b38161f0a)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

u-boot: update to 2013.07

(From OE-Core rev: b2d6f08ff4f03079973eab76a790bf4555e32236)

Signed-off-by: Laszlo Papp <lpapp-RoXCvvDuEio@public.gmane.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gettext: update to upstream version 0.18.3.1

(From OE-Core rev: 18170af0d466815491f445ac7ff23906f7474d1a)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: command.py: Call updateCache for all states != running

updateCache handles the logic for shutting down the parsing so we need
to call it for all cases when we're not running.

This fixes hangs if Ctrl+C is pressed during parsing.

(Bitbake rev: 552b8935dd2f9f11e8d5c08a597a7e966b891480)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

read-only-rootfs-hook.sh: check before bind mounting /var/lib

It's possible that /var/lib is on a separate writable partition. In such
situation, we should not bind mount /var/lib with tmpfs, becasue it's
already writable.

This patch fixes this problem by checking whether /var/lib is already
on a writable partition.

[YOCTO #4888]

(From OE-Core rev: 86ac10995fd08226f82d87e23fda5d4898c3190f)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

checkroot.sh: check for conflicting configurations

In our current boot scripts, two ways are used to determine whether
the rootfs is read-only or not. One by checking the READ_ONLY_ROOTFS
value in /etc/default/rcS, the other by checking the /etc/fstab entry.

>From a normal Linux user's point of view, the way of checking the
/etc/fstab entry is preferred. However, as there are several boot scripts
that need to know whether rootfs is read-only or not, checking /etc/fstab
in each script brings too much overhead. Thus, these boot scripts
use the READ_ONLY_ROOTFS value in /etc/default/rcS.

In normal use cases, there would be no problem, as both /etc/default/rcS and
the /etc/fstab are modified at rootfs time. However, if the user changes
the mount option for rootfs in /etc/fstab to read-write, and he/she forgets
to change the value in /etc/default/rcS, there would be unexpected results.
For example, the udev-cache would still be disabled.

So at a minimal, a check for conflicting configurations between /etc/fstab
and /etc/default/rcS should be added in checkroot.sh so that there would be
reasonable warnings if users have configured the system in a non-consistent
way.

[YOCTO #4880]

(From OE-Core rev: 1565a0c5a3f245703e280ca90cf11d3f9374788a)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

eglibc: fix directory cleanup for 2.17

Commit e0c2dd275827a4b37b8116d0f0119333638461af broke building
eglibc 2.17, which still ships pt_chown under eglibc/ directory.

Fix by only deleting directory when pt_chown is not there.

Cc: Khem Raj <raj.khem@gmail.com>
(From OE-Core rev: 10722a37bb7efa563425a7389100b9322d96492e)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

SPDX:real-time license scanning and SPDX output.

SPDX integrates real-time license scanning, generates
SPDX standard output and license verification
information during the OE-Core build process. The
existing module includes scanning patched packages
and creating package and file level SPDX documents.

(From OE-Core rev: 7a37cc81fb95d56b5ac5e5ca22a1900e45717911)

Signed-off-by: liangcao <liangcao@unomaha.edu>
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classess/testimage: change default test suites

Some new tests were added, safe to have them in the defaults
for sato-sdk and sato. Not all of the new tests are here though,
either because they aren't applicable to default images or take too long.
(like build iptables/cvs/sudoky ones, they can be enabled
in local.conf and a special target on AB setups.). Also reorder them a bit.

(From OE-Core rev: caa18a99ec002e4e87e32cae8a2d28bb0e32c5a6)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-2.7-manifest: Add missing python-ctypes dependency to python-multiprocessing

(From OE-Core rev: 5abf18a7f11ee9e88e0eec1b66cc63427d9097a8)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image_types.bbclass: replace genext2fs with populate-extfs.sh

* The benefits:
  - Really support ext4

  - Support the sparse file (we lost the sparse file in the image in the
    past, the sparse file became into the common file)

  - Fix the error reported by fsck: (ext2/ext3)
      Inode 1025, i_size is 16384, should be 17408.

  - Have a uniform code for ext2/3/4 generation

* Comments from Darren Hart:
Basically, genext2fs doesn't support creating ext4 filesystems. It
creates, as I understand it, an ext2 filesystem, then adds a journal,
and sets some bits. It can't support the newer features like extents. So
what we end up with is a bit of a hack for a filesystem.

The ext tools (e2fsprogs) unfortunately don't provide an integrated
solution for generating prepopulated filesystem images as many other
mkfs* tools do. One thing missing was symlink support in libext2fs. I
added that support and demonstrated a script which uses the e2fsprogs
debugfs tool that can populate the newly formatted filesystem from a
directory and without root privileges.

[YOCTO #3848]

(From OE-Core rev: 40c3e18f43b2f074cec97d21aeb8d21f26dd5048)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa: change behaviour for unskippable tests

When a test module wants to be skipped because it doesn't
apply to the image but it was nevertheless a required
test (one in TEST_SUITES), we issued an warning that it
was a required test and went on with running the module.
Usually all tests in the module failed (e.g gcc tests on a non-sdk image),
but this allowed us to know that something went wrong with the image
(some package/feature didn't make it).

However, instead of just issuing an warning and running the tests
it's better to throw an exception. The traceback will tell us what's wrong,
and we don't run every single test method.
Output will look like this:
--snip--
| NOTE: Test modules  ['oeqa.runtime.ping', 'oeqa.runtime.ssh', 'oeqa.runtime.gcc']
| NOTE: Found 5 tests
| test_ping (oeqa.runtime.ping.PingTest) ... ok
| test_ssh (oeqa.runtime.ssh.SshTest) ... ok
| ERROR
|
| ======================================================================
| ERROR: setUpModule (oeqa.runtime.gcc)
| ----------------------------------------------------------------------
| Traceback (most recent call last):
|   File "/mnt/back/yocto/poky/meta/lib/oeqa/runtime/gcc.py", line 8, in setUpModule
|     skipModule("Image doesn't have tools-sdk in IMAGE_FEATURES")
|   File "/mnt/back/yocto/poky/meta/lib/oeqa/oetest.py", line 108, in skipModule
|     "\nor the image really doesn't have the requred feature/package when it should." % (modname, reason))
| Exception:
| Test gcc wants to be skipped.
| Reason is: Image doesn't have tools-sdk in IMAGE_FEATURES
| Test was required in TEST_SUITES, so either the condition for skipping is wrong
| or the image really doesn't have the requred feature/package when it should.
|
| ----------------------------------------------------------------------
| Ran 2 tests in 1.036s
|
| FAILED (errors=1)
| NOTE: Sending SIGTERM to runqemu
--snip--

(From OE-Core rev: fd51cecf8b258d9f839a0ecebde69d09f75dc468)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add iptables, cvs and sudoku projects build tests on target

Downloads iptables/cvs/sudoku-savant sources and builds them on target.

(From OE-Core rev: df4568205c3a7e0b20c6299e29f96bd30560146b)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/utils: targetbuild: Add helper class for building packages on target

This class can be used for test cases that configure
and build packages on target.

(From OE-Core rev: 4b15e82c4fcb0c40b0e316ef2050944eee4418ef)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa: make it possible to restart the target

Tweak QemuRunner so we can actually restart the
qemu target in a test (if we want more memory for example).
Also add a restart method to the base test class so that tests
can use it.

(From OE-Core rev: 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: smart: add new smart tests

Add class to be inherited by smart tests, along with more basic tests and tests
using a rpm repository.

(From OE-Core rev: f6186b4204dcc421b4e616774315c8a2a77fb5c5)

Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/utils: decorators: return the decorated method

Decorators should return whatever the decorated methods return.

(From OE-Core rev: c92513d6ff3f8f06d937a5cdf4d94708f27c3850)

Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/utils: qemurunner: save host IP address

Save host IP address to host_ip.
Read /proc/PID/cmdline on host to look for IPs of target and host;
instead of running 'ps'.
Also removed some extra empty lines from file.

(From OE-Core rev: 1fcf10db10fa36430e37c95c9fee27197e73f7a5)

Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/utils: new file: httpserver.py useful for serving files over HTTP to the target

It can be used by smart repo/channel tests to serve deploy_dir.

(From OE-Core rev: e38e18d6923cc3db50b56fa3fc64081fe4aa8669)

Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: rpm: add install and erase tests

Copies to target rpm-doc file from deploy_dir
and tries to install and then remove that package.
rpm-doc was chosen because it's small, it only adds
a few files to target, and it's almost always found in
deploy_dir for images with package-management/rpm.

(From OE-Core rev: a2d2f2b7b111863d3c50dedded37aab813d9634f)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add vncserver for target test

(From OE-Core rev: 56bc5d717b34563ed36c0618305e4ec5080c3a27)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add adjust date and time test

(From OE-Core rev: ede300f44f1770b1e3e5c59f65cf5079379a2bc1)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add new scp test

Copies a 5MB to target using scp, more of an
network test than a scp one.

(From OE-Core rev: 2ec4a0686b9a91e56dfba3fa2e574c0c531508ff)

Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add new PAM support test

New test which verifies some usual commands functionality with PAM support

(From OE-Core rev: 06c7914e3354ff4e430a6b664f40e5a71e212761)

Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add new skeletoninit test

New test which verifies the usage of skeleton init script available with meta-skeleton layer

(From OE-Core rev: fcc59cbcdb1550489d372edf9f465efa7165245f)

Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add new logrotate test

New logrotate test which verifies the log directory change in logrotate.conf.
Needs an image with logrotate installed.

(From OE-Core rev: 186d79a603b5cbf5a93e6f5dbba5f62ed8d4d8d8)

Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add a test for ldd

This test checks that at least one path in RTLDLIST exists.

(From OE-Core rev: d53ffbf21a6b17f0f0537929a95a502958d82a09)

Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add test for perl

This test runs a perl script on the target and checks the output.

(From OE-Core rev: 95abdbf2d715c9e7e3368f5193167feb5efc6261)

Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa/runtime: add basic test for x32 images

Checks that an x86-64-x32 image has the right binaries.

(From OE-Core rev: da42e38b2bc4a606b717ac302cfc77aefb1a5795)

Signed-off-by: Alexandru Georgescu <alexandru.c.georgescu@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

connman-gnome: fix DHCP segfault

In networks that don't have a DHCP server configured, ipv4 address
allocation fails and the ipv4 structure doesn't get populated.
The patch checks this case also.

[YOCTO #3945]

(From OE-Core rev: 2e3bff33f4ebeb6ac2272ab377d00416ef1af83f)

Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu at intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>