rtc: mc146818-lib: Adjust failure return code for mc146818_get_time()

commit af838635a3eb9b1bc0d98599c101ebca98f31311 upstream.

mc146818_get_time() calls mc146818_avoid_UIP() to avoid fetching the
time while RTC update is in progress (UIP). When this fails, the return
code is -EIO, but actually there was no IO failure.

The reason for the return from mc146818_avoid_UIP() is that the UIP
wasn't cleared in the time period. Adjust the return code to -ETIMEDOUT
to match the behavior.

Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: <stable@vger.kernel.org>
Fixes: 2a61b0ac5493 ("rtc: mc146818-lib: refactor mc146818_get_time")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231128053653.101798-2-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: Adjust failure return code for cmos_set_alarm()

commit 1311a8f0d4b23f58bbababa13623aa40b8ad4e0c upstream.

When mc146818_avoid_UIP() fails to return a valid value, this is because
UIP didn't clear in the timeout period. Adjust the return code in this
case to -ETIMEDOUT.

Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: <stable@vger.kernel.org>
Fixes: cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time")
Fixes: cd17420ebea5 ("rtc: cmos: avoid UIP when writing alarm time")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231128053653.101798-3-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: cmos: Use ACPI alarm for non-Intel x86 systems too

commit 3d762e21d56370a43478b55e604b4a83dd85aafc upstream.

Intel systems > 2015 have been configured to use ACPI alarm instead
of HPET to avoid s2idle issues.

Having HPET programmed for wakeup causes problems on AMD systems with
s2idle as well.

One particular case is that the systemd "SuspendThenHibernate" feature
doesn't work properly on the Framework 13" AMD model. Switching to
using ACPI alarm fixes the issue.

Adjust the quirk to apply to AMD/Hygon systems from 2021 onwards.
This matches what has been tested and is specifically to avoid potential
risk to older systems.

Cc: <stable@vger.kernel.org> # 6.1+
Reported-by: <alvin.zhuge@gmail.com>
Reported-by: <renzhamin@gmail.com>
Closes: https://github.com/systemd/systemd/issues/24279
Reported-by: Kelvie Wong <kelvie@kelvie.ca>
Closes: https://community.frame.work/t/systemd-suspend-then-hibernate-wakes-up-after-5-minutes/39392
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231106162310.85711-1-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD

commit 832dd634bd1b4e3bbe9f10b9c9ba5db6f6f2b97f upstream.

Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.

The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:

* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en

In both cases the workaround is described as:

| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
|    unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.

The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".

Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:

| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
|  tlbi vale1, xzr
|  dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
|  ldr lr, [sp, #S_LR]
|  add sp, sp, #PT_REGS_SIZE // restore sp
|  eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]

This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.

The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:

| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
|  [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
|  ldr lr, [sp, #S_LR]
|  add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
|  tlbi vale1, xzr
|  dsb nsh
| alternative_else_nop_endif
|  eret

The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:

| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.

... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled".

Fixes: 471470bc7052 ("arm64: errata: Add Cortex-A520 speculative unprivileged load workaround")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240116110221.420467-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/sme: Always exit sme_alloc() early with existing storage

commit dc7eb8755797ed41a0d1b5c0c39df3c8f401b3d9 upstream.

When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.

Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.

Fixes: 5d0a8d2fba50 ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: errata: Add Cortex-A510 speculative unprivileged load workaround

commit f827bcdafa2a2ac21c91e47f587e8d0c76195409 upstream.

Implement the workaround for ARM Cortex-A510 erratum 3117295. On an
affected Cortex-A510 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.

The erratum and workaround are the same as ARM Cortex-A520 erratum
2966298, so reuse the existing workaround.

Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-2-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Rename ARM64_WORKAROUND_2966298

commit 546b7cde9b1dd36089649101b75266564600ffe5 upstream.

In preparation to apply ARM64_WORKAROUND_2966298 for multiple errata,
rename the kconfig and capability. No functional change.

Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-1-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: Fixup compat mode boot failure

commit 5f449e245e5b0d9d63eef6c8968fbdc3a8594407 upstream.

In COMPAT mode, the STACK_TOP is DEFAULT_MAP_WINDOW (0x80000000), but
the TASK_SIZE is 0x7fff000. When the user stack is upon 0x7fff000, it
will cause a user segment fault. Sometimes, it would cause boot
failure when the whole rootfs is rv32.

Freeing unused kernel image (initmem) memory: 2236K
Run /sbin/init as init process
Starting init: /sbin/init exists but couldn't execute it (error -14)
Run /etc/init as init process
...

Increase the TASK_SIZE to cover STACK_TOP.

Cc: stable@vger.kernel.org
Fixes: add2cc6b6515 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231222115703.2404036-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: Fixup compat arch_get_mmap_end

commit 97b7ac69be2e5a683e898f5267f659fde52efdd5 upstream.

When the task is in COMPAT mode, the arch_get_mmap_end should be 2GB,
not TASK_SIZE_64. The TASK_SIZE has contained is_compat_mode()
detection, so change the definition of STACK_TOP_MAX to TASK_SIZE
directly.

Cc: stable@vger.kernel.org
Fixes: add2cc6b6515 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231222115703.2404036-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run

commit 206c857dd17d4d026de85866f1b5f0969f2a109e upstream.

In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work.

In mtk_jpeg_dec_device_run, if error happens in
mtk_jpeg_set_dec_dst, it will finally start the worker while
mark the job as finished by invoking v4l2_m2m_job_finish.

There are two methods to trigger the bug. If we remove the
module, it which will call mtk_jpeg_remove to make cleanup.
The possible sequence is as follows, which will cause a
use-after-free bug.

CPU0                  CPU1
mtk_jpeg_dec_...    |
  start worker     |
                    |mtk_jpeg_job_timeout_work
mtk_jpeg_remove     |
  v4l2_m2m_release  |
    kfree(m2m_dev); |
                    |
                    | v4l2_m2m_get_curr_priv
                    |   m2m_dev->curr_ctx //use

If we close the file descriptor, which will call mtk_jpeg_release,
it will have a similar sequence.

Fix this bug by starting timeout worker only if started jpegdec worker
successfully. Then v4l2_m2m_job_finish will only be called in
either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.

Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mtk-jpeg: Fix timeout schedule error in mtk_jpegdec_worker.

commit 38e1857933def4b3fafc28cc34ff3bbc84cad2c3 upstream.

In mtk_jpegdec_worker, if error occurs in mtk_jpeg_set_dec_dst, it
will start the timeout worker and invoke v4l2_m2m_job_finish at
the same time. This will break the logic of design for there should
be only one function to call v4l2_m2m_job_finish. But now the timeout
handler and mtk_jpegdec_worker will both invoke it.

Fix it by start the worker only if mtk_jpeg_set_dec_dst successfully
finished.

Fixes: da4ede4b7fd6 ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: i2c: st-mipid02: correct format propagation

commit b33cb0cbe2893b96ecbfa16254407153f4b55d16 upstream.

Use a copy of the struct v4l2_subdev_format when propagating
format from the sink to source pad in order to avoid impacting the
sink format returned to the application.

Thanks to Jacopo Mondi for pointing the issue.

Fixes: 6c01e6f3f27b ("media: st-mipid02: Propagate format from sink to source pad")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mmc_spi: remove custom DMA mapped buffers

commit 84a6be7db9050dd2601c9870f65eab9a665d2d5d upstream.

There is no need to duplicate what SPI core or individual controller
drivers already do, i.e. mapping the buffers for DMA capable transfers.

Note, that the code, besides its redundancy, was buggy: strictly speaking
there is no guarantee, while it's true for those which can use this code
(see below), that the SPI host controller _is_ the device which does DMA.

Also see the Link tags below.

Additional notes. Currently only two SPI host controller drivers may use
premapped (by the user) DMA buffers:

  - drivers/spi/spi-au1550.c

  - drivers/spi/spi-fsl-spi.c

Both of them have DMA mapping support code. I don't expect that SPI host
controller code is worse than what has been done in mmc_spi. Hence I do
not expect any regressions here. Otherwise, I'm pretty much sure these
regressions have to be fixed in the respective drivers, and not here.

That said, remove all related pieces of DMA mapping code from mmc_spi.

Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/
Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Use mrq.sbc in close-ended ffu

commit 4d0c8d0aef6355660b6775d57ccd5d4ea2e15802 upstream.

Field Firmware Update (ffu) may use close-ended or open ended sequence.
Each such sequence is comprised of a write commands enclosed between 2
switch commands - to and from ffu mode. So for the close-ended case, it
will be: cmd6->cmd23-cmd25-cmd6.

Some host controllers however, get confused when multi-block rw is sent
without sbc, and may generate auto-cmd12 which breaks the ffu sequence.
I encountered  this issue while testing fwupd (github.com/fwupd/fwupd)
on HP Chromebook x2, a qualcomm based QC-7c, code name - strongbad.

Instead of a quirk, or hooking the request function of the msm ops,
it would be better to fix the ioctl handling and make it use mrq.sbc
instead of issuing SET_BLOCK_COUNT separately.

Signed-off-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231129092535.3278-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: videobuf2-dma-sg: fix vmap callback

commit 608ca5a60ee47b48fec210aeb7a795a64eb5dcee upstream.

For dmabuf import users to be able to use the vaddr from another
videobuf2-dma-sg source, the exporter needs to set a proper vaddr on
vb2_dma_sg_dmabuf_ops_vmap callback. This patch adds vmap on map if
buf->vaddr was not set.

Cc: stable@kernel.org
Fixes: 7938f4218168 ("dma-buf-map: Rename to iosys-map")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/get_abi: fix source path leak

commit 5889d6ede53bc17252f79c142387e007224aa554 upstream.

The code currently leaks the absolute path of the ABI files into the
rendered documentation.

There exists code to prevent this, but it is not effective when an
absolute path is passed, which it is when $srctree is used.

I consider this to be a minimal, stop-gap fix; a better fix would strip
off the actual prefix instead of hacking it off with a regex.

Link: https://mastodon.social/@vegard/111677490643495163
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: kernel_abi.py: fix command injection

commit 3231dd5862779c2e15633c96133a53205ad660ce upstream.

The kernel-abi directive passes its argument straight to the shell.
This is unfortunate and unnecessary.

Let's always use paths relative to $srctree/Documentation/ and use
subprocess.check_call() instead of subprocess.Popen(shell=True).

This also makes the code shorter.

Link: https://fosstodon.org/@jani/111676532203641247
Reported-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-2-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dlm: use kernel_connect() and kernel_bind()

commit e9cdebbe23f1aa9a1caea169862f479ab3fa2773 upstream.

Recent changes to kernel_connect() and kernel_bind() ensure that
callers are insulated from changes to the address parameter made by BPF
SOCK_ADDR hooks. This patch wraps direct calls to ops->connect() and
ops->bind() with kernel_connect() and kernel_bind() to protect callers
in such cases.

Link: https://lore.kernel.org/netdev/9944248dba1bce861375fcce9de663934d933ba9.camel@redhat.com/
Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect")
Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind")
Cc: stable@vger.kernel.org
Signed-off-by: Jordan Rife <jrife@google.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lsm: new security_file_ioctl_compat() hook

commit f1bb47a31dff6d4b34fb14e99850860ee74bb003 upstream.

Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).

However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.

This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".

This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.

Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.

Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: qcom: sdx55: fix USB SS wakeup

commit 710dd03464e4ab5b3d329768388b165d61958577 upstream.

The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.

Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231213173131.29436-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sdm670: fix USB SS wakeup

commit 047b2edc35b8db22354b4fba37818b548fc18896 upstream.

The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.

Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231214074319.11023-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sdm670: fix USB DP/DM HS PHY interrupts

commit c42d12ea105f67b0f137f1e52d5c59d13fe12b1f upstream.

The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.

A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.

Fixes: de3b3de30999 ("arm64: dts: qcom: sdm670: fix USB wakeup interrupt types")
Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231214074319.11023-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sc8180x: fix USB SS wakeup

commit 0afa885d42d05d30161ab8eab1ebacd993edb82b upstream.

The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.

Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231214074319.11023-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sc8180x: fix USB DP/DM HS PHY interrupts

commit 687d402bb350b392fa330e9d9d1b917777ee9ed1 upstream.

The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.

A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.

Fixes: 0dc0f6da3d43 ("arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types")
Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sm8150: fix USB SS wakeup

commit cc4e1da491b84ca05339a19893884cda78f74aef upstream.

The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.

Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts

commit 134de5e831775e8b178db9b131c1d3769a766982 upstream.

The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.

A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.

Fixes: 54524b6987d1 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types")
Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sdm845: fix USB SS wakeup

commit 971f5d8b0618d09db75184ddd8cca0767514db5d upstream.

The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.

Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sdm845: fix USB DP/DM HS PHY interrupts

commit 204f9ed4bad6293933179517624143b8f412347c upstream.

The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.

A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.

Fixes: 84ad9ac8d9ca ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types")
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: qcom: sdx55: fix USB DP/DM HS PHY interrupts

commit de95f139394a5ed82270f005bc441d2e7c1e51b7 upstream.

The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.

A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.

Fixes: d0ec3c4c11c3 ("ARM: dts: qcom: sdx55: fix USB wakeup interrupt types")
Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231213173131.29436-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: Add missing vio-supply for AW2013

commit cc1ec484f2d0f464ad11b56fe3de2589c23f73ec upstream.

Add the missing vio-supply to all usages of the AW2013 LED controller
to ensure that the regulator needed for pull-up of the interrupt and
I2C lines is really turned on. While this seems to have worked fine so
far some of these regulators are not guaranteed to be always-on. For
example, pm8916_l6 is typically turned off together with the display
if there aren't any other devices (e.g. sensors) keeping it always-on.

Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20231204-qcom-aw2013-vio-v1-1-5d264bb5c0b2@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sc7280: fix usb_1 wakeup interrupt types

commit c34199d967a946e55381404fa949382691737521 upstream.

A recent cleanup reordering the usb_1 wakeup interrupts inadvertently
switched the DP and SuperSpeed interrupt trigger types.

Fixes: 4a7ffc10d195 ("arm64: dts: qcom: align DWC3 USB interrupts with DT schema")
Cc: stable@vger.kernel.org # 5.19
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231120164331.8116-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types

commit 0dc0f6da3d43da8d2297105663e51ecb01b6f790 upstream.

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sm8150: fix USB wakeup interrupt types

commit 54524b6987d1fffe64cbf3dded1b2fa6b903edf9 upstream.

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Jack Pham <quic_jackp@quicinc.com>
Link: https://lore.kernel.org/r/20231120164331.8116-11-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sdm670: fix USB wakeup interrupt types

commit de3b3de30999106549da4df88a7963d0ac02b91e upstream.

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231120164331.8116-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sdm845: fix USB wakeup interrupt types

commit 84ad9ac8d9ca29033d589e79a991866b38e23b85 upstream.

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sc7180: fix USB wakeup interrupt types

commit 9b956999bf725fd62613f719c3178fdbee6e5f47 upstream.

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: msm8939: Make blsp_dma controlled-remotely

commit 4bbda9421f316efdaef5dbf642e24925ef7de130 upstream.

The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.

In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.

Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L866-872

Cc: stable@vger.kernel.org # 6.5
Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-2-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: msm8916: Make blsp_dma controlled-remotely

commit 7c45b6ddbcff01f9934d11802010cfeb0879e693 upstream.

The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.

In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.

Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8916.dtsi#L1466-1472

Cc: stable@vger.kernel.org # 6.5
Fixes: a0e5fb103150 ("arm64: dts: qcom: Add msm8916 BLSP device nodes")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-1-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: Fix rk3588 USB power-domain clocks

commit 44de8996ed5a10f08f2fe947182da6535edcfae5 upstream.

The QoS blocks saved/restored when toggling the PD_USB power domain are
clocked by ACLK_USB. Attempting to access these memory regions without
that clock running will result in an indefinite CPU stall.

The PD_USB node wasn't specifying this clock dependency, resulting in
hangs when trying to toggle the power domain (either on or off), unless
we get "lucky" and have ACLK_USB running for another reason at the time.
This "luck" can result from the bootloader leaving USB powered/clocked,
and if no built-in driver wants USB, Linux will disable the unused
PD+CLK on boot when {pd,clk}_ignore_unused aren't given. This can also
be unlucky because the two cleanup tasks run in parallel and race: if
the CLK is disabled first, the PD deactivation stalls the boot. In any
case, the PD cannot then be reenabled (if e.g. the driver loads later)
once the clock has been stopped.

Fix this by specifying a dependency on ACLK_USB, instead of only
ACLK_USB_ROOT. The child-parent relationship means the former implies
the latter anyway.

Fixes: c9211fa2602b8 ("arm64: dts: rockchip: Add base DT for rk3588 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231216021019.1543811-1-CFSworks@gmail.com
[changed to only include the missing clock, not dropping the root-clocks]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: configure eth pad driver strength for orangepi r1 plus lts

commit fc5a80a432607d05e85bba37971712405f75c546 upstream.

The default strength is not enough to provide stable connection
under 3.3v LDO voltage.

Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS")
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20231216040723.17864-1-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: sprd: fix the cpu node for UMS512

commit 2da4f4a7b003441b80f0f12d8a216590f652a40f upstream.

The UMS512 Socs have 8 cores contains 6 a55 and 2 a75.
modify the cpu nodes to correct information.

Fixes: 2b4881839a39 ("arm64: dts: sprd: Add support for Unisoc's UMS512")
Cc: stable@vger.kernel.org
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Link: https://lore.kernel.org/r/20230711162346.5978-1-cixi.geng@linux.dev
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: qcom: sdx55: fix pdc '#interrupt-cells'

commit cc25bd06c16aa582596a058d375b2e3133f79b93 upstream.

The Qualcomm PDC interrupt controller binding expects two cells in
interrupt specifiers.

Fixes: 9d038b2e62de ("ARM: dts: qcom: Add SDX55 platform and MTP board support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231213173131.29436-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12

commit 84228d5e29dbc7a6be51e221000e1d122125826c upstream.

The kernel hangs for a good 12 seconds without any info being printed to
dmesg, very early in the boot process, if this regulator is not enabled.

Force-enable it to work around this issue, until we know more about the
underlying problem.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Cc: stable@vger.kernel.org # v5.8+
Link: https://lore.kernel.org/r/20231206221556.15348-2-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: qcom: sdx55: fix USB wakeup interrupt types

commit d0ec3c4c11c3b30e1f2d344973b2a7bf0f986734 upstream.

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sc8280xp-crd: fix eDP phy compatible

commit 663affdb12b3e26c77d103327cf27de720c8117e upstream.

The sc8280xp Display Port PHYs can be used in either DP or eDP mode and
this is configured using the devicetree compatible string which defaults
to DP mode in the SoC dtsi.

Override the default compatible string for the CRD eDP PHY node so that
the eDP settings are used.

Fixes: 4a883a8d80b5 ("arm64: dts: qcom: sc8280xp-crd: Enable EDP")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231016080658.6667-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6q-apalis: add can power-up delay on ixora board

commit b76bbf835d8945080b22b52fc1e6f41cde06865d upstream.

Newer variants of Ixora boards require a power-up delay when powering up
the CAN transceiver of up to 1ms.

Cc: stable@vger.kernel.org
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/power: Fix power soft-off button emulation on qemu

commit 6472036581f947109b20664121db1d143e916f0b upstream.

Make sure to start the kthread to check the power button on qemu as
well if the power button address was provided.
This fixes the qemu built-in system_powerdown runtime command.

Fixes: d0c219472980 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/firmware: Fix F-extend for PDC addresses

commit 735ae74f73e55c191d48689bd11ff4a06ea0508f upstream.

When running with narrow firmware (64-bit kernel using a 32-bit
firmware), extend PDC addresses into the 0xfffffff0.00000000
region instead of the 0xf0f0f0f0.00000000 region.

This fixes the power button on the C3700 machine in qemu (64-bit CPU
with 32-bit firmware), and my assumption is that the previous code was
really never used (because most 64-bit machines have a 64-bit firmware),
or it just worked on very old machines because they may only decode
40-bit of virtual addresses.

Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: Add spinlock to protect WP access when queueing TREs

commit b89b6a863dd53bc70d8e52d50f9cfaef8ef5e9c9 upstream.

Protect WP accesses such that multiple threads queueing buffers for
incoming data do not race.

Meanwhile, if CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once
__local_bh_enable_ip is called as part of write_unlock_bh. Hence, let's
take irqsave lock after TRE is generated to avoid running write_unlock_bh
when irqsave lock is held.

Cc: stable@vger.kernel.org
Fixes: 189ff97cca53 ("bus: mhi: core: Add support for data transfer")
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-2-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: Drop chan lock before queuing buffers

commit 01bd694ac2f682fb8017e16148b928482bc8fa4b upstream.

Ensure read and write locks for the channel are not taken in succession by
dropping the read lock from parse_xfer_event() such that a callback given
to client can potentially queue buffers and acquire the write lock in that
process. Any queueing of buffers should be done without channel read lock
acquired as it can result in multiple locks and a soft lockup.

Cc: <stable@vger.kernel.org> # 5.7
Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-3-git-send-email-quic_qianyu@quicinc.com
[mani: added fixes tag and cc'ed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: host: Add alignment check for event ring read pointer

commit eff9704f5332a13b08fbdbe0f84059c9e7051d5f upstream.

Though we do check the event ring read pointer by "is_valid_ring_ptr"
to make sure it is in the buffer range, but there is another risk the
pointer may be not aligned.  Since we are expecting event ring elements
are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer
could lead to multiple issues like DoS or ring buffer memory corruption.

So add a alignment check for event ring read pointer.

Fixes: ec32332df764 ("bus: mhi: core: Sanity check values from remote device before use")
cc: stable@vger.kernel.org
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231031-alignment_check-v2-1-1441db7c5efd@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: Fix max_mapnr being uninitialized on early stages

commit e1a9ae45736989c972a8d1c151bc390678ae6205 upstream.

max_mapnr variable is utilized in the pfn_valid() method in order to
determine the upper PFN space boundary. Having it uninitialized
effectively makes any PFN passed to that method invalid. That in its turn
causes the kernel mm-subsystem occasion malfunctions even after the
max_mapnr variable is actually properly updated. For instance,
pfn_valid() is called in the init_unavailable_range() method in the
framework of the calls-chain on MIPS:
setup_arch()
+-> paging_init()
    +-> free_area_init()
        +-> memmap_init()
            +-> memmap_init_zone_range()
                +-> init_unavailable_range()

Since pfn_valid() always returns "false" value before max_mapnr is
initialized in the mem_init() method, any flatmem page-holes will be left
in the poisoned/uninitialized state including the IO-memory pages. Thus
any further attempts to map/remap the IO-memory by using MMU may fail.
In particular it happened in my case on attempt to map the SRAM region.
The kernel bootup procedure just crashed on the unhandled unaligned access
bug raised in the __update_cache() method:

> Unhandled kernel unaligned access[#1]:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-XXX-dirty #2056
> ...
> Call Trace:
> [<8011ef9c>] __update_cache+0x88/0x1bc
> [<80385944>] ioremap_page_range+0x110/0x2a4
> [<80126948>] ioremap_prot+0x17c/0x1f4
> [<80711b80>] __devm_ioremap+0x8c/0x120
> [<80711e0c>] __devm_ioremap_resource+0xf4/0x218
> [<808bf244>] sram_probe+0x4f4/0x930
> [<80889d20>] platform_probe+0x68/0xec
> ...

Let's fix the problem by initializing the max_mapnr variable as soon as
the required data is available. In particular it can be done right in the
paging_init() method before free_area_init() is called since all the PFN
zone boundaries have already been calculated by that time.

Cc: stable@vger.kernel.org
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: always initialize struct msghdr completely

commit 78fbb92af27d0982634116c7a31065f24d092826 upstream.

syzbot complains that msg->msg_get_inq value can be uninitialized [1]

struct msghdr got many new fields recently, we should always make
sure their values is zero by default.

[1]
 BUG: KMSAN: uninit-value in tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571
  tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571
  inet_recvmsg+0x131/0x580 net/ipv4/af_inet.c:879
  sock_recvmsg_nosec net/socket.c:1044 [inline]
  sock_recvmsg+0x12b/0x1e0 net/socket.c:1066
  __sock_xmit+0x236/0x5c0 drivers/block/nbd.c:538
  nbd_read_reply drivers/block/nbd.c:732 [inline]
  recv_work+0x262/0x3100 drivers/block/nbd.c:863
  process_one_work kernel/workqueue.c:2627 [inline]
  process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2700
  worker_thread+0xf45/0x1490 kernel/workqueue.c:2781
  kthread+0x3ed/0x540 kernel/kthread.c:388
  ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242

Local variable msg created at:
  __sock_xmit+0x4c/0x5c0 drivers/block/nbd.c:513
  nbd_read_reply drivers/block/nbd.c:732 [inline]
  recv_work+0x262/0x3100 drivers/block/nbd.c:863

CPU: 1 PID: 7465 Comm: kworker/u5:1 Not tainted 6.7.0-rc7-syzkaller-00041-gf016f7547aee #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: nbd5-recv recv_work

Fixes: f94fd25cb0aa ("tcp: pass back data left in socket after receive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: nbd@other.debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240112132657.647112-1-edumazet@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/vfio-ap: do not reset queue removed from host config

commit b9bd10c43456d16abd97b717446f51afb3b88411 upstream.

When a queue is unbound from the vfio_ap device driver, it is reset to
ensure its crypto data is not leaked when it is bound to another device
driver. If the queue is unbound due to the fact that the adapter or domain
was removed from the host's AP configuration, then attempting to reset it
will fail with response code 01 (APID not valid) getting returned from the
reset command. Let's ensure that the queue is assigned to the host's
configuration before resetting it.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: eeb386aeb5b7 ("s390/vfio-ap: handle config changed and scan complete notification")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-7-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/vfio-ap: reset queues associated with adapter for queue unbound from driver

commit f009cfa466558b7dfe97f167ba1875d6f9ea4c07 upstream.

When a queue is unbound from the vfio_ap device driver, if that queue is
assigned to a guest's AP configuration, its associated adapter is removed
because queues are defined to a guest via a matrix of adapters and
domains; so, it is not possible to remove a single queue.

If an adapter is removed from the guest's AP configuration, all associated
queues must be reset to prevent leaking crypto data should any of them be
assigned to a different guest or device driver. The one caveat is that if
the queue is being removed because the adapter or domain has been removed
from the host's AP configuration, then an attempt to reset the queue will
fail with response code 01, AP-queue number not valid; so resetting these
queues should be skipped.

Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Fixes: 09d31ff78793 ("s390/vfio-ap: hot plug/unplug of AP devices when probed/removed")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-6-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/vfio-ap: reset queues filtered from the guest's AP config

commit f848cba767e59f8d5c54984b1d45451aae040d50 upstream.

When filtering the adapters from the configuration profile for a guest to
create or update a guest's AP configuration, if the APID of an adapter and
the APQI of a domain identify a queue device that is not bound to the
vfio_ap device driver, the APID of the adapter will be filtered because an
individual APQN can not be filtered due to the fact the APQNs are assigned
to an AP configuration as a matrix of APIDs and APQIs. Consequently, a
guest will not have access to all of the queues associated with the
filtered adapter. If the queues are subsequently made available again to
the guest, they should re-appear in a reset state; so, let's make sure all
queues associated with an adapter unplugged from the guest are reset.

In order to identify the set of queues that need to be reset, let's allow a
vfio_ap_queue object to be simultaneously stored in both a hashtable and a
list: A hashtable used to store all of the queues assigned
to a matrix mdev; and/or, a list used to store a subset of the queues that
need to be reset. For example, when an adapter is hot unplugged from a
guest, all guest queues associated with that adapter must be reset. Since
that may be a subset of those assigned to the matrix mdev, they can be
stored in a list that can be passed to the vfio_ap_mdev_reset_queues
function.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-5-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/vfio-ap: let on_scan_complete() callback filter matrix and update guest's APCB

commit 774d10196e648e2c0b78da817f631edfb3dfa557 upstream.

When adapters and/or domains are added to the host's AP configuration, this
may result in multiple queue devices getting created and probed by the
vfio_ap device driver. For each queue device probed, the matrix of adapters
and domains assigned to a matrix mdev will be filtered to update the
guest's APCB. If any adapters or domains get added to or removed from the
APCB, the guest's AP configuration will be dynamically updated (i.e., hot
plug/unplug). To dynamically update the guest's configuration, its VCPUs
must be taken out of SIE for the period of time it takes to make the
update. This is disruptive to the guest's operation and if there are many
queues probed due to a change in the host's AP configuration, this could be
troublesome. The problem is exacerbated by the fact that the
'on_scan_complete' callback also filters the mdev's matrix and updates
the guest's AP configuration.

In order to reduce the potential amount of disruption to the guest that may
result from a change to the host's AP configuration, let's bypass the
filtering of the matrix and updating of the guest's AP configuration in the
probe callback - if due to a host config change - and defer it until the
'on_scan_complete' callback is invoked after the AP bus finishes its device
scan operation. This way the filtering and updating will be performed only
once regardless of the number of queues added.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-4-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/vfio-ap: loop over the shadow APCB when filtering guest's AP configuration

commit 16fb78cbf56e42b8efb2682a4444ab59e32e7959 upstream.

While filtering the mdev matrix, it doesn't make sense - and will have
unexpected results - to filter an APID from the matrix if the APID or one
of the associated APQIs is not in the host's AP configuration. There are
two reasons for this:

1. An adapter or domain that is not in the host's AP configuration can be
   assigned to the matrix; this is known as over-provisioning. Queue
   devices, however, are only created for adapters and domains in the
   host's AP configuration, so there will be no queues associated with an
   over-provisioned adapter or domain to filter.

2. The adapter or domain may have been externally removed from the host's
   configuration via an SE or HMC attached to a DPM enabled LPAR. In this
   case, the vfio_ap device driver would have been notified by the AP bus
   via the on_config_changed callback and the adapter or domain would
   have already been filtered.

Since the matrix_mdev->shadow_apcb.apm and matrix_mdev->shadow_apcb.aqm are
copied from the mdev matrix sans the APIDs and APQIs not in the host's AP
configuration, let's loop over those bitmaps instead of those assigned to
the matrix.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-3-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/vfio-ap: always filter entire AP matrix

commit 850fb7fa8c684a4c6bf0e4b6978f4ddcc5d43d11 upstream.

The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or
domain is assigned to the mdev. The purpose of the function is to update
the guest's AP configuration by filtering the matrix of adapters and
domains assigned to the mdev. When an adapter or domain is assigned, only
the APQNs associated with the APID of the new adapter or APQI of the new
domain are inspected. If an APQN does not reference a queue device bound to
the vfio_ap device driver, then it's APID will be filtered from the mdev's
matrix when updating the guest's AP configuration.

Inspecting only the APID of the new adapter or APQI of the new domain will
result in passing AP queues through to a guest that are not bound to the
vfio_ap device driver under certain circumstances. Consider the following:

guest's AP configuration (all also assigned to the mdev's matrix):
14.0004
14.0005
14.0006
16.0004
16.0005
16.0006

unassign domain 4
unbind queue 16.0005
assign domain 4

When domain 4 is re-assigned, since only domain 4 will be inspected, the
APQNs that will be examined will be:
14.0004
16.0004

Since both of those APQNs reference queue devices that are bound to the
vfio_ap device driver, nothing will get filtered from the mdev's matrix
when updating the guest's AP configuration. Consequently, queue 16.0005
will get passed through despite not being bound to the driver. This
violates the linux device model requirement that a guest shall only be
given access to devices bound to the device driver facilitating their
pass-through.

To resolve this problem, every adapter and domain assigned to the mdev will
be inspected when filtering the mdev's matrix.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-2-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: fsl: cpm1: qmc: Fix rx channel reset

commit dfe66d012af2ddfa566cf9c860b8472b412fb7e4 upstream.

The qmc_chan_reset_rx() set the is_rx_stopped flag. This leads to an
inconsistent state in the following sequence.
    qmc_chan_stop()
    qmc_chan_reset()
Indeed, after the qmc_chan_reset() call, the channel must still be
stopped. Only a qmc_chan_start() call can move the channel from stopped
state to started state.

Fix the issue removing the is_rx_stopped flag setting from
qmc_chan_reset()

Fixes: 3178d58e0b97 ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: fsl: cpm1: qmc: Fix __iomem addresses declaration

commit a5ec3a21220da06bdda2e686012ca64fdb6c513d upstream.

Running sparse (make C=1) on qmc.c raises a lot of warning such as:
  ...
  warning: incorrect type in assignment (different address spaces)
     expected struct cpm_buf_desc [usertype] *[noderef] __iomem bd
     got struct cpm_buf_desc [noderef] [usertype] __iomem *txbd_free
  ...

Indeed, some variable were declared 'type *__iomem var' instead of
'type __iomem *var'.

Use the correct declaration to remove these warnings.

Fixes: 3178d58e0b97 ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-3-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: fsl: cpm1: tsa: Fix __iomem addresses declaration

commit fc0c64154e5ddeb6f63c954735bd646ce5b8d9a4 upstream.

Running sparse (make C=1) on tsa.c raises a lot of warning such as:
  --- 8< ---
  warning: incorrect type in assignment (different address spaces)
     expected void *[noderef] si_regs
     got void [noderef] __iomem *
  --- 8< ---

Indeed, some variable were declared 'type *__iomem var' instead of
'type __iomem *var'.

Use the correct declaration to remove these warnings.

Fixes: 1d4ba0b81c1c ("soc: fsl: cpm1: Add support for TSA")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312051959.9YdRIYbg-lkp@intel.com/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-2-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov01a10: Enable runtime PM before registering async sub-device

commit 47a78052db51b16e8045524fbf33373b58f1323b upstream.

As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.

So runtime PM should be ready before its async sub-device is registered
and accessible by others.

It also sets the runtime PM status to active as the sensor was turned
on by i2c-core.

Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov13b10: Enable runtime PM before registering async sub-device

commit 7b0454cfd8edb3509619407c3b9f78a6d0dee1a5 upstream.

As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.

So runtime PM should be ready before its async sub-device is registered
and accessible by others.

Fixes: 7ee850546822 ("media: Add sensor driver support for the ov13b10 camera.")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov9734: Enable runtime PM before registering async sub-device

commit e242e9c144050ed120cf666642ba96b7c4462a4c upstream.

As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.

So runtime PM should be ready before its async sub-device is registered
and accessible by others.

Fixes: d3f863a63fe4 ("media: i2c: Add ov9734 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rpmsg: virtio: Free driver_override when rpmsg_remove()

commit d5362c37e1f8a40096452fc201c30e705750e687 upstream.

Free driver_override when rpmsg_remove(), otherwise
the following memory leak will occur:

unreferenced object 0xffff0000d55d7080 (size 128):
  comm "kworker/u8:2", pid 56, jiffies 4294893188 (age 214.272s)
  hex dump (first 32 bytes):
    72 70 6d 73 67 5f 6e 73 00 00 00 00 00 00 00 00  rpmsg_ns........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000009c94c9c1>] __kmem_cache_alloc_node+0x1f8/0x320
    [<000000002300d89b>] __kmalloc_node_track_caller+0x44/0x70
    [<00000000228a60c3>] kstrndup+0x4c/0x90
    [<0000000077158695>] driver_set_override+0xd0/0x164
    [<000000003e9c4ea5>] rpmsg_register_device_override+0x98/0x170
    [<000000001c0c89a8>] rpmsg_ns_register_device+0x24/0x30
    [<000000008bbf8fa2>] rpmsg_probe+0x2e0/0x3ec
    [<00000000e65a68df>] virtio_dev_probe+0x1c0/0x280
    [<00000000443331cc>] really_probe+0xbc/0x2dc
    [<00000000391064b1>] __driver_probe_device+0x78/0xe0
    [<00000000a41c9a5b>] driver_probe_device+0xd8/0x160
    [<000000009c3bd5df>] __device_attach_driver+0xb8/0x140
    [<0000000043cd7614>] bus_for_each_drv+0x7c/0xd4
    [<000000003b929a36>] __device_attach+0x9c/0x19c
    [<00000000a94e0ba8>] device_initial_probe+0x14/0x20
    [<000000003c999637>] bus_probe_device+0xa0/0xac

Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Fixes: b0b03b811963 ("rpmsg: Release rpmsg devices in backends")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231215020049.78750-1-xiaolei.wang@windriver.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: imx355: Enable runtime PM before registering async sub-device

commit efa5fe19c0a9199f49e36e1f5242ed5c88da617d upstream.

As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.

So runtime PM should be ready before its async sub-device is registered
and accessible by others.

Fixes: df0b5c4a7ddd ("media: add imx355 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom: pmic_glink_altmode: fix port sanity check

commit c4fb7d2eac9ff9bfc35a2e4d40c7169a332416e0 upstream.

The PMIC GLINK altmode driver currently supports at most two ports.

Fix the incomplete port sanity check on notifications to avoid
accessing and corrupting memory beyond the port array if we ever get a
notification for an unsupported port.

Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231109093100.19971-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: Clarify conditions to enable continuous reads

commit 828f6df1bcba7f64729166efc7086ea657070445 upstream.

The current logic is probably fine but is a bit convoluted. Plus, we
don't want partial pages to be part of the sequential operation just in
case the core would optimize the page read with a subpage read (which
would break the sequence). This may happen on the first and last page
only, so if the start offset or the end offset is not aligned with a
page boundary, better avoid them to prevent any risk.

Cc: stable@vger.kernel.org
Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-5-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: Prevent sequential reads with on-die ECC engines

commit a62c4597953fe54c6af04166a5e2872efd0e1490 upstream.

Some devices support sequential reads when using the on-die ECC engines,
some others do not. It is a bit hard to know which ones will break other
than experimentally, so in order to avoid such a difficult and painful
task, let's just pretend all devices should avoid using this
optimization when configured like this.

Cc: stable@vger.kernel.org
Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-4-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: Fix core interference with sequential reads

commit 7c9414c870c027737d0f2ed7b0ed10f26edb1c61 upstream.

A couple of reports pointed at some strange failures happening a bit
randomly since the introduction of sequential page reads support. After
investigation it turned out the most likely reason for these issues was
the fact that sometimes a (longer) read might happen, starting at the
same page that was read previously. This is optimized by the raw NAND
core, by not sending the READ_PAGE command to the NAND device and just
reading out the data in a local cache. When this page is also flagged as
being the starting point for a sequential read, it means the page right
next will be accessed without the right instructions. The NAND chip will
be confused and will not output correct data. In order to avoid such
situation from happening anymore, we can however handle this case with a
bit of additional logic, to postpone the initialization of the read
sequence by one page.

Reported-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Closes: https://lore.kernel.org/linux-mtd/CAP1tNvS=NVAm-vfvYWbc3k9Cx9YxMc2uZZkmXk8h1NhGX877Zg@mail.gmail.com/
Reported-by: Måns Rullgård <mans@mansr.com>
Closes: https://lore.kernel.org/linux-mtd/yw1xfs6j4k6q.fsf@mansr.com/
Reported-by: Martin Hundebøll <martin@geanix.com>
Closes: https://lore.kernel.org/linux-mtd/9d0c42fcde79bfedfe5b05d6a4e9fdef71d3dd52.camel@geanix.com/
Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-3-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: Prevent crossing LUN boundaries during sequential reads

commit bbcd80f53a5e8c27c2511f539fec8c373f500cf4 upstream.

The ONFI specification states that devices do not need to support
sequential reads across LUN boundaries. In order to prevent such event
from happening and possibly failing, let's introduce the concept of
"pause" in the sequential read to handle these cases. The first/last
pages remain the same but any time we cross a LUN boundary we will end
and restart (if relevant) the sequential read operation.

Cc: stable@vger.kernel.org
Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: maps: vmu-flash: Fix the (mtd core) switch to ref counters

commit a7d84a2e7663bbe12394cc771107e04668ea313a upstream.

While switching to ref counters for track mtd devices use, the vmu-flash
driver was forgotten. The reason for reading the ref counter seems
debatable, but let's just fix the build for now.

Fixes: 19bfa9ebebb5 ("mtd: use refcount to prevent corruption")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312022315.79twVRZw-lkp@intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231205075936.13831-1-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / devfreq: Fix buffer overflow in trans_stat_show

commit 08e23d05fa6dc4fc13da0ccf09defdd4bbc92ff4 upstream.

Fix buffer overflow in trans_stat_show().

Convert simple snprintf to the more secure scnprintf with size of
PAGE_SIZE.

Add condition checking if we are exceeding PAGE_SIZE and exit early from
loop. Also add at the end a warning that we exceeded PAGE_SIZE and that
stats is disabled.

Return -EFBIG in the case where we don't have enough space to write the
full transition table.

Also document in the ABI that this function can return -EFBIG error.

Link: https://lore.kernel.org/all/20231024183016.14648-2-ansuelsmth@gmail.com/
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218041
Fixes: e552bbaf5b98 ("PM / devfreq: Add sysfs node for representing frequency transition information.")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/vfio-ap: unpin pages on gisc registration failure

commit 7b2d039da622daa9ba259ac6f38701d542b237c3 upstream.

In the vfio_ap_irq_enable function, after the page containing the
notification indicator byte (NIB) is pinned, the function attempts
to register the guest ISC. If registration fails, the function sets the
status response code and returns without unpinning the page containing
the NIB. In order to avoid a memory leak, the NIB should be unpinned before
returning from the vfio_ap_irq_enable function.

Co-developed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: 783f0a3ccd79 ("s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231109164427.460493-2-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: s390/aes - Fix buffer overread in CTR mode

commit d07f951903fa9922c375b8ab1ce81b18a0034e3b upstream.

When processing the last block, the s390 ctr code will always read
a whole block, even if there isn't a whole block of data left.  Fix
this by using the actual length left and copy it into a buffer first
for processing.

Fixes: 0200f3ecc196 ("crypto: s390 - add System z hardware support for CTR mode")
Cc: <stable@vger.kernel.org>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewd-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwrng: core - Fix page fault dead lock on mmap-ed hwrng

commit 78aafb3884f6bc6636efcc1760c891c8500b9922 upstream.

There is a dead-lock in the hwrng device read path.  This triggers
when the user reads from /dev/hwrng into memory also mmap-ed from
/dev/hwrng.  The resulting page fault triggers a recursive read
which then dead-locks.

Fix this by using a stack buffer when calling copy_to_user.

Reported-by: Edward Adam Davis <eadavis@qq.com>
Reported-by: syzbot+c52ab18308964d248092@syzkaller.appspotmail.com
Fixes: 9996508b3353 ("hwrng: core - Replace u32 in driver API with byte array")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: hibernate: Enforce ordering during image compression/decompression

commit 71cd7e80cfde548959952eac7063aeaea1f2e1c6 upstream.

An S4 (suspend to disk) test on the LoongArch 3A6000 platform sometimes
fails with the following error messaged in the dmesg log:

Invalid LZO compressed length

That happens because when compressing/decompressing the image, the
synchronization between the control thread and the compress/decompress/crc
thread is based on a relaxed ordering interface, which is unreliable, and the
following situation may occur:

CPU 0 CPU 1
save_image_lzo lzo_compress_threadfn
  atomic_set(&d->stop, 1);
  atomic_read(&data[thr].stop)
  data[thr].cmp = data[thr].cmp_len;
     WRITE data[thr].cmp_len

Then CPU0 gets a stale cmp_len and writes it to disk. During resume from S4,
wrong cmp_len is loaded.

To maintain data consistency between the two threads, use the acquire/release
variants of atomic set and read operations.

Fixes: 081a9d043c98 ("PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Co-developed-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Weihao Li <liweihao@loongson.cn>
[ rjw: Subject rewrite and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: api - Disallow identical driver names

commit 27016f75f5ed47e2d8e0ca75a8ff1f40bc1a5e27 upstream.

Disallow registration of two algorithms with identical driver names.

Cc: <stable@vger.kernel.org>
Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: fix lz4 inplace decompression

commit 3c12466b6b7bf1e56f9b32c366a3d83d87afb4de upstream.

Currently EROFS can map another compressed buffer for inplace
decompression, that was used to handle the cases that some pages of
compressed data are actually not in-place I/O.

However, like most simple LZ77 algorithms, LZ4 expects the compressed
data is arranged at the end of the decompressed buffer and it
explicitly uses memmove() to handle overlapping:
  __________________________________________________________
 |_ direction of decompression --> ____ |_ compressed data _|

Although EROFS arranges compressed data like this, it typically maps two
individual virtual buffers so the relative order is uncertain.
Previously, it was hardly observed since LZ4 only uses memmove() for
short overlapped literals and x86/arm64 memmove implementations seem to
completely cover it up and they don't have this issue.  Juhyung reported
that EROFS data corruption can be found on a new Intel x86 processor.
After some analysis, it seems that recent x86 processors with the new
FSRM feature expose this issue with "rep movsb".

Let's strictly use the decompressed buffer for lz4 inplace
decompression for now.  Later, as an useful improvement, we could try
to tie up these two buffers together in the correct order.

Reported-and-tested-by: Juhyung Park <qkrwngud825@gmail.com>
Closes: https://lore.kernel.org/r/CAD14+f2AVKf8Fa2OO1aAUdDNTDsVzzR6ctU_oJSmTyd6zSYR2Q@mail.gmail.com
Fixes: 0ffd71bcc3a0 ("staging: erofs: introduce LZ4 decompression inplace")
Fixes: 598162d05080 ("erofs: support decompress big pcluster for lz4 backend")
Cc: stable <stable@vger.kernel.org> # 5.4+
Tested-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206045534.3920847-1-hsiangkao@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: lib/mpi - Fix unexpected pointer access in mpi_ec_init

commit ba3c5574203034781ac4231acf117da917efcd2a upstream.

When the mpi_ec_ctx structure is initialized, some fields are not
cleared, causing a crash when referencing the field when the
structure was released. Initially, this issue was ignored because
memory for mpi_ec_ctx is allocated with the __GFP_ZERO flag.
For example, this error will be triggered when calculating the
Za value for SM2 separately.

Fixes: d58bb7e55a8a ("lib/mpi: Introduce ec implementation to MPI library")
Cc: stable@vger.kernel.org # v6.5
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: sysfs: validate scrub_speed_max value

commit 2b0122aaa800b021e36027d7f29e206f87c761d6 upstream.

The value set as scrub_speed_max accepts size with suffixes
(k/m/g/t/p/e) but we should still validate it for trailing characters,
similar to what we do with chunk_size_store.

CC: stable@vger.kernel.org # 5.15+
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

OPP: Pass rounded rate to _set_opp()

commit 7269c250db1b89cda72ca419b7bd5e37997309d6 upstream.

The OPP core finds the eventual frequency to set with the help of
clk_round_rate() and the same was earlier getting passed to _set_opp()
and that's what would get configured.

The commit 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of
frequency") mistakenly changed that. Fix it.

Fixes: 1efae8d2e777 ("OPP: Make dev_pm_opp_set_opp() independent of frequency")
Cc: v5.18+ <stable@vger.kernel.org> # v6.0+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: properly install vmlinuz.efi

commit 7b21ed7d119dc06b0ed2ba3e406a02cafe3a8d03 upstream.

If you select CONFIG_EFI_ZBOOT, we will generate vmlinuz.efi, and then
when we go to install the kernel we'll install the vmlinux instead
because install.sh only recognizes Image.gz as wanting the compressed
install image.  With CONFIG_EFI_ZBOOT we don't get the proper kernel
installed, which means it doesn't boot, which makes for a very confused
and subsequently angry kernel developer.

Fix this by properly installing our compressed kernel if we've enabled
CONFIG_EFI_ZBOOT.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Cc: <stable@vger.kernel.org> # 6.1.x
Fixes: c37b830fef13 ("arm64: efi: enable generic EFI compressed boot")
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/6edb1402769c2c14c4fbef8f7eaedb3167558789.1702570674.git.josef@toxicpanda.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: sleep: Fix possible deadlocks in core system-wide PM code

commit 7839d0078e0d5e6cc2fa0b0dfbee71de74f1e557 upstream.

It is reported that in low-memory situations the system-wide resume core
code deadlocks, because async_schedule_dev() executes its argument
function synchronously if it cannot allocate memory (and not only in
that case) and that function attempts to acquire a mutex that is already
held.  Executing the argument function synchronously from within
dpm_async_fn() may also be problematic for ordering reasons (it may
cause a consumer device's resume callback to be invoked before a
requisite supplier device's one, for example).

Address this by changing the code in question to use
async_schedule_dev_nocall() for scheduling the asynchronous
execution of device suspend and resume functions and to directly
run them synchronously if async_schedule_dev_nocall() returns false.

Link: https://lore.kernel.org/linux-pm/ZYvjiqX6EsL15moe@perf/
Reported-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: 5.7+ <stable@vger.kernel.org> # 5.7+: 6aa09a5bccd8 async: Split async_schedule_node_domain()
Cc: 5.7+ <stable@vger.kernel.org> # 5.7+: 7d4b5d7a37bd async: Introduce async_schedule_dev_nocall()
Cc: 5.7+ <stable@vger.kernel.org> # 5.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

async: Introduce async_schedule_dev_nocall()

commit 7d4b5d7a37bdd63a5a3371b988744b060d5bb86f upstream.

In preparation for subsequent changes, introduce a specialized variant
of async_schedule_dev() that will not invoke the argument function
synchronously when it cannot be scheduled for asynchronous execution.

The new function, async_schedule_dev_nocall(), will be used for fixing
possible deadlocks in the system-wide power management core code.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> for the series.
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

async: Split async_schedule_node_domain()

commit 6aa09a5bccd8e224d917afdb4c278fc66aacde4d upstream.

In preparation for subsequent changes, split async_schedule_node_domain()
in two pieces so as to allow the bottom part of it to be called from a
somewhat different code path.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: allow for the last group to be marked as trimmed

commit 7c784d624819acbeefb0018bac89e632467cca5a upstream.

The ext4 filesystem tracks the trim status of blocks at the group
level.  When an entire group has been trimmed then it is marked as
such and subsequent trim invocations with the same minimum trim size
will not be attempted on that group unless it is marked as able to be
trimmed again such as when a block is freed.

Currently the last group can't be marked as trimmed due to incorrect
logic in ext4_last_grp_cluster(). ext4_last_grp_cluster() is supposed
to return the zero based index of the last cluster in a group. This is
then used by ext4_try_to_trim_range() to determine if the trim
operation spans the entire group and as such if the trim status of the
group should be recorded.

ext4_last_grp_cluster() takes a 0 based group index, thus the valid
values for grp are 0..(ext4_get_groups_count - 1). Any group index
less than (ext4_get_groups_count - 1) is not the last group and must
have EXT4_CLUSTERS_PER_GROUP(sb) clusters. For the last group we need
to calculate the number of clusters based on the number of blocks in
the group. Finally subtract 1 from the number of clusters as zero
based indexing is expected.  Rearrange the function slightly to make
it clear what we are calculating and returning.

Reproducer:
// Create file system where the last group has fewer blocks than
// blocks per group
$ mkfs.ext4 -b 4096 -g 8192 /dev/nvme0n1 8191
$ mount /dev/nvme0n1 /mnt

Before Patch:
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group not marked as trimmed so second invocation still discards blocks
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed

After Patch:
fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group marked as trimmed so second invocation DOESN'T discard any blocks
fstrim -v /mnt
/mnt: 0 B (0 bytes) trimmed

Fixes: 45e4ab320c9b ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213051635.37731-1-surajjs@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2

commit 482b718a84f08b6fc84879c3e90cc57dba11c115 upstream.

Commit 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian
builds"), merged in Linux-6.5-rc1 changes the calling ABI in a way
that is incompatible with the current code for the PS3's LV1 hypervisor
calls.

This change just adds the line '# CONFIG_PPC64_BIG_ENDIAN_ELF_ABI_V2 is not set'
to the ps3_defconfig file so that the PPC64_ELF_ABI_V1 is used.

Fixes run time errors like these:

  BUG: Kernel NULL pointer dereference at 0x00000000
  Faulting instruction address: 0xc000000000047cf0
  Oops: Kernel access of bad area, sig: 11 [#1]
  Call Trace:
  [c0000000023039e0] [c00000000100ebfc] ps3_create_spu+0xc4/0x2b0 (unreliable)
  [c000000002303ab0] [c00000000100d4c4] create_spu+0xcc/0x3c4
  [c000000002303b40] [c00000000100eae4] ps3_enumerate_spus+0xa4/0xf8

Fixes: 8c5fa3b5c4df ("powerpc/64: Make ELFv2 the default for big-endian builds")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/df906ac1-5f17-44b9-b0bb-7cd292a0df65@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: update iface_last_update on each query-and-update

[ Upstream commit 78e727e58e54efca4c23863fbd9e16e9d2d83f81 ]

iface_last_update was an unused field when it was introduced.
Later, when we had periodic update of server interface list,
this field was used regularly to decide when to update next.

However, with the new logic of updating the interfaces, it
becomes crucial that this field be updated whenever
parse_server_interfaces runs successfully.

This change updates this field when either the server does
not support query of interfaces; so that we do not query
the interfaces repeatedly. It also updates the field when
the function reaches the end.

Fixes: aa45dadd34e4 ("cifs: change iface_list from array to sorted linked list")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: handle servers that still advertise multichannel after disabling

[ Upstream commit f591062bdbf4742b7f1622173017f19e927057b0 ]

Some servers like Azure SMB servers always advertise multichannel
capability in server capabilities list. Such servers return error
STATUS_NOT_IMPLEMENTED for ioctl calls to query server interfaces,
and expect clients to consider that as a sign that they do not support
multichannel.

We already handled this at mount time. Soon after the tree connect,
we query server interfaces. And when server returned STATUS_NOT_IMPLEMENTED,
we kept interface list as empty. When cifs_try_adding_channels gets
called, it would not find any interfaces, so will not add channels.

For the case where an active multichannel mount exists, and multichannel
is disabled by such a server, this change will now allow the client
to disable secondary channels on the mount. It will check the return
status of query server interfaces call soon after a tree reconnect.
If the return status is EOPNOTSUPP, then instead of the check to add
more channels, we'll disable the secondary channels instead.

For better code reuse, this change also moves the common code for
disabling multichannel to a helper function.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 78e727e58e54 ("cifs: update iface_last_update on each query-and-update")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: reconnect worker should take reference on server struct unconditionally

[ Upstream commit 04909192ada3285070f8ced0af7f07735478b364 ]

Reconnect worker currently assumes that the server struct
is alive and only takes reference on the server if it needs
to call smb2_reconnect.

With the new ability to disable channels based on whether the
server has multichannel disabled, this becomes a problem when
we need to disable established channels. While disabling the
channels and deallocating the server, there could be reconnect
work that could not be cancelled (because it started).

This change forces the reconnect worker to unconditionally
take a reference on the server when it runs.

Also, this change now allows smb2_reconnect to know if it was
called by the reconnect worker. Based on this, the cifs_put_tcp_session
can decide whether it can cancel the reconnect work synchronously or not.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 78e727e58e54 ("cifs: update iface_last_update on each query-and-update")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "cifs: reconnect work should have reference on server struct"

[ Upstream commit 823342524868168bf681f135d01b4ae10f5863ec ]

This reverts commit 19a4b9d6c372cab6a3b2c9a061a236136fe95274.

This earlier commit was making an assumption that each mod_delayed_work
called for the reconnect work would result in smb2_reconnect_server
being called twice. This assumption turns out to be untrue. So reverting
this change for now.

I will submit a follow-up patch to fix the actual problem in a different
way.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 78e727e58e54 ("cifs: update iface_last_update on each query-and-update")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: handle when server stops supporting multichannel

[ Upstream commit ee1d21794e55ab76505745d24101331552182002 ]

When a server stops supporting multichannel, we will
keep attempting reconnects to the secondary channels today.
Avoid this by freeing extra channels when negotiate
returns no multichannel support.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 78e727e58e54 ("cifs: update iface_last_update on each query-and-update")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: handle when server starts supporting multichannel

[ Upstream commit 705fc522fe9d58848c253ee0948567060f36e2a7 ]

When the user mounts with multichannel option, but the
server does not support it, there can be a time in future
where it can be supported.

With this change, such a case is handled.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Stable-dep-of: 78e727e58e54 ("cifs: update iface_last_update on each query-and-update")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: reconnect work should have reference on server struct

[ Upstream commit 19a4b9d6c372cab6a3b2c9a061a236136fe95274 ]

The delayed work for reconnect takes server struct
as a parameter. But it does so without holding a ref
to it. Normally, this may not show a problem as
the reconnect work is only cancelled on umount.

However, since we now plan to support scaling down of
channels, and the scale down can happen from reconnect
work itself, we need to fix it.

This change takes a reference on the server struct
before it is passed to the delayed work. And drops
the reference in the delayed work itself. Or if
the delayed work is successfully cancelled, by the
process that cancels it.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 78e727e58e54 ("cifs: update iface_last_update on each query-and-update")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: handle cases where a channel is closed

[ Upstream commit 0c51cc6f2cb0108e7d49805f6e089cd85caab279 ]

So far, SMB multichannel could only scale up, but not
scale down the number of channels. In this series of
patch, we now allow the client to deal with the case
of multichannel disabled on the server when the share
is mounted. With that change, we now need the ability
to scale down the channels.

This change allows the client to deal with cases of
missing channels more gracefully.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 78e727e58e54 ("cifs: update iface_last_update on each query-and-update")
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb: client: fix parsing of SMB3.1.1 POSIX create context

[ Upstream commit 76025cc2285d9ede3d717fe4305d66f8be2d9346 ]

The data offset for the SMB3.1.1 POSIX create context will always be
8-byte aligned so having the check 'noff + nlen >= doff' in
smb2_parse_contexts() is wrong as it will lead to -EINVAL because noff
+ nlen == doff.

Fix the sanity check to correctly handle aligned create context data.

Fixes: af1689a9b770 ("smb: client: fix potential OOBs in smb2_parse_contexts()")
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: ecovec24: Rename missed backlight field from fbdev to dev

[ Upstream commit d87123aa9a7920e88633ffc5c5a0a22ab08bdc06 ]

One instance of gpio_backlight_platform_data.fbdev was renamed, but the
second instance was forgotten, causing a build failure:

    arch/sh/boards/mach-ecovec24/setup.c: In function ‘arch_setup’:
    arch/sh/boards/mach-ecovec24/setup.c:1223:37: error: ‘struct gpio_backlight_platform_data’ has no member named ‘fbdev’; did you mean ‘dev’?
     1223 |                 gpio_backlight_data.fbdev = NULL;
  |                                     ^~~~~
  |                                     dev

Fix this by updating the second instance.

Fixes: ed369def91c1579a ("backlight/gpio_backlight: Rename field 'fbdev' to 'dev'")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309231601.Uu6qcRnU-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230925111022.3626362-1-geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Kick the requeue list after inserting when flushing

[ Upstream commit 6df0e077d76bd144c533b61d6182676aae6b0a85 ]

When libata calls ata_link_abort() to abort all ata queued commands, it
calls blk_abort_request() on the SCSI command representing each QC.

This causes scsi_timeout() to be called, which calls scsi_eh_scmd_add() for
each SCSI command.

scsi_eh_scmd_add() sets the SCSI host to state recovery, and then adds the
command to shost->eh_cmd_q.

This will wake up the SCSI EH, and eventually the libata EH strategy
handler will be called, which calls scsi_eh_flush_done_q() to either flush
retry or flush finish each failed command.

The commands that are flush retried by scsi_eh_flush_done_q() are done so
using scsi_queue_insert().

Before commit 8b566edbdbfb ("scsi: core: Only kick the requeue list if
necessary"), __scsi_queue_insert() called blk_mq_requeue_request() with the
second argument set to true, indicating that it should always kick/run the
requeue list after inserting.

After commit 8b566edbdbfb ("scsi: core: Only kick the requeue list if
necessary"), __scsi_queue_insert() does not kick/run the requeue list after
inserting, if the current SCSI host state is recovery (which is the case in
the libata example above).

This optimization is probably fine in most cases, as I can only assume that
most often someone will eventually kick/run the queues.

However, that is not the case for scsi_eh_flush_done_q(), where we can see
that the request gets inserted to the requeue list, but the queue is never
started after the request has been inserted, leading to the block layer
waiting for the completion of command that never gets to run.

Since scsi_eh_flush_done_q() is called by SCSI EH context, the SCSI host
state is most likely always in recovery when this function is called.

Thus, let scsi_eh_flush_done_q() explicitly kick the requeue list after
inserting a flush retry command, so that scsi_eh_flush_done_q() keeps the
same behavior as before commit 8b566edbdbfb ("scsi: core: Only kick the
requeue list if necessary").

Simple reproducer for the libata example above:
$ hdparm -Y /dev/sda
$ echo 1 > /sys/class/scsi_device/0\:0\:0\:0/device/delete

Fixes: 8b566edbdbfb ("scsi: core: Only kick the requeue list if necessary")
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Closes: https://lore.kernel.org/linux-scsi/ZZw3Th70wUUvCiCY@kevinlocke.name/
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240111120533.3612509-1-cassel@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>