x86: do not zap_low_mappings in __smp_prepare_cpus

It was okay when cpus were cold booted before this point.
But with the new state machine, they will not have arrived to
the trampoline yet. zapping low mappings will have the bad effect
of breaking it completely after paging enablement

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: schedule work only if keventd is already running

Only call schedule_work if keventd is already running.
This is already the way x86_64 does

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: don't initialize sibling and core maps during preparation

it is redundant, since it is already done by set_cpu_sibling_map()

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: call nmi_watchdog_default in i386

this does not exist, so it will be an empty macro

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: call check_nmi_watchdog explicitly in native_smp_cpus_done

With this, remove its late_initcall marker from nmi_32.c

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unify nmi_32.h and nmi_64.h

Two more files goes away. nmi_64.h and nmi_32.h gives birth
to nmi.h

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: wipe get_nmi_reason out of nmi_64.h

use mach_traps when it is supposed to be used.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: don't set maps in native_smp_prepare_boot_cpu()

By this time, they are already set in init routines

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move smp_intr_init away from smpboot_32.c

We move it to apic_32.c, since it's irq related anyway,
and only called from that file.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: include smpboot_hooks.h in smpboot_64.c

We do it and also fix conflicts, which makes x86_64 automatically
closer to i386

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: include mach_wakecpu.h in smpboot_64

Do it and also fix conflicts, which automatically makes
x86_64 look closer to i386

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add subarch support (for headers) to x86_64

this patch allows x86_64 to use subarch mach_ headers
in practice, since x86_64 does not have any subarch, it
will use mach_default. But it will allow for substantially
less code duplication

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move impress_friends and smp_check to cpus_done

the cpu count is changed accordingly: now, what matters is
online cpus.
Also, we add those functions for x86_64

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: do smp tainting checks in a separate function

It will ease integration for x86_64

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: allow user to impress friends.

Impressing friends is a very important thing.
Do it in a separate function to make it even more
explicit, and ease integration.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: get rid of cpucount

weighting a map will do.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fill cpu to apicid and present map in mpparse, fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fill cpu to apicid and present map in mpparse

This is the way x86_64 does, and complement the already
present patch that does the bios cpu to apicid mapping here

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fill bios cpu to apicid maps

We fill the per-cpu (or array) that maps
bios cpu id to apicid in mpparse_32.c, the way x86_64 does

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use specialized routine for setup per-cpu area

We use the same routing as x86_64, moved now to setup.c.
Just with a few ifdefs inside.
Note that this routing uses prefill_possible_map().
It has the very nice side effect of allowing hotplugging of
cpus that are marked as present but disabled by acpi bios.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix alloc_bootmem_pages_node macro

missing a semicolon

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: make node to apic mapping declarations unconditional

Instead of declaring them inside of X86_64 ifdef, do it
unconditionally

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: initialize map pointers in setup_32.c

this will serve as a reference as to whether or not to
use the per_cpu variables in mpparse. Done the same way
as x86_64

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: define bios to apicid mapping

This mapping already exists in x86_64, just provide it for
i386

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unify extern masks declaration

take them off smp_{32,64}.h and move to smp.h

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move assignment of CPU_PREPARE before do_boot_cpu

Done to match x86_64

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: make __smp_prepare_cpu void

We have already removed the only condition that could fail here.
so just don't test for any return value

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: do tests before do_boot_cpu in i386

Do tests before do_boot_cpu in native_cpu_up for i386.
Tests are a little bit broader than originally, and are the
same as x86_64. Test for smp_callin is not applicable right now
and is deferred.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: isolate logic to disable smp

Put it in a disable_smp() function, as x86_64 does

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: isolate sanity checking

Isolate all sanity checking in a smp_sanity_check()
function as x86_64 does.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add barriers statement

goal is to have i386 and x86_64 closer, so we
add barriers to match

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use APIC_INTEGRATED tests in x86_64

This patch does not change the behaviour of x86_64, since APIC_INTEGRATED
is always defined as (1). But the code now matches exactly i386 version
(well, this part of the code, at least)

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: provide APIC_INTEGRATED definition for x86_64

it is always integrated, so define as 1.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move state update out of ipi_lock

it does not need to be inside lock. Do the way i386 does.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move setup_secondary_clock a little bit down in the function

This is done so we call setup_secondary_clock() in the same place x86_64
does. A separate patch for this is appearantly not needed. But clock
initialization is such a delicate thing, that it's safer to do this way

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: don't call local_irq_enable before entering idle

the call to idle is guaranteed to do it.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: always enable irqs when entering idle

This matches x86_64 behaviour, which is a superior one IMHO

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge smp_store_cpu_info

now that it is the same between arches, put it into smpboot.c

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: call identify_secondary_cpu in smp_store_cpu_info

Call it conditionally for secondary cpus. This behaviour
matches i386

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use identify_boot_cpu

Call this function instead of identify_cpu in bugs_64.c

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: provide specialized identification routines for x86_64

provide two specialized identify_secondary_cpu() and identify_boot_cpu()
routines for x86_64. Although not strictly needed, they are functionally
correct, and will ease integration with i386

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: decouple call to print_cpu_info from smp_store_cpu_info

This will ease integration with i386

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add an smp_apply_quirks to smpboot_32.c

The split of smp_store_cpu_info in a quirks-only part
will ease integration with x86_64

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use start_ipi_hook in x86_64

It is used to match i386. The definition for the non-paravirt
case is moved to smp.h instead of smp_32.h

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use apic_*_around instead of apic_write in x86_64

This patch replaces apic_read() for apic_read_around()
and apic_write for apic_write_around() in smpboot_64.c
We do it to have a common usage between x86_64 and i386.
In the former, it will always simply expand to apic_write

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add loglevel to printks

Add loglevel facilities to printks in __inquire_remote_apic.
the levels are the ones to match x86_64 ones.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: change var types in __inquire_remote_apic

change some variables' types in __inquire_remote_apic to
match x86_64

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 iommu: add more documentation

Fix coding style in pci-dma_64.c and add stubs for documentation. I
hope someone fills the rest, I understand maybe off and soft...

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move mp_bus_id_to_node to numa.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move mp_bus_id_to_local to numa.c

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: make mp_bus_id_to_type optional

[ mingo@elte.hu: fix boot regression. ]

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: rearrange bus_type parse

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use not_pci bitmap #6

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use not_pci bitmap #5

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use not_pci bitmap #4

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use not_pci bitmap #3

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use not_pci bitmap #2

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use not_pci bitmap #1

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add mp_bus_not_pci bitmap to mpparse_32.c

Signed-off: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: get boot_cpu_id as early for k8_scan_nodes

When acpi=off or there is no SRAT defined, apicid_to_node is got from K8
Northbridge PCI configuration space in k8_scan_nodes() in
arch/x86_64/mm/k8toplogy.c.

The problem is that it assumes bsp apic id is 0 at that point.

For four socket system with Quad core cpus installed, all cpus apic id
is offset by 4, and bsp apic id is 4.

For eight socket system with dual core cpus installed, all cpus apic id
is offset by 2, and bsp apic id is 2.

We need get boot_cpu_id --- bsp apic id, before k8_scan_nodes by called.

So create early_acpi_boot_init and early_get_smp_config for get boot_cpu_id.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move quad_local_to_mp_bus_id to numa.c

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: correct/clarify comment in nops.h

<asm-x86/nops.h> describes certain multibyte instructions as
"generic" nops when in fact they aren't nops at all in 64-bit
mode (missing REX.W causing truncation of a register).

Update the comment to state that K8 or P6 style nops should be
used in 64-bit mode. This matches what the alternatives code does.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Remove redundant display of free swap space in show_mem()

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: prevent unconditional writes to DebugCtl MSR

Otherwise, enabling (or better, subsequent disabling) of single
stepping would cause a kernel oops on CPUs not having this MSR.

The patch could have been added a conditional to the MSR write in
user_disable_single_step(), but centralizing the updates seems safer
and (looking forward) better manageable.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Don't send RESCHEDULE_VECTOR to offlined cpus

In the x86 native_smp_send_reschedule_function(), don't send the IPI if the
cpu has gone offline already. Warn nevertheless!!

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add AMD Northbridge MSR definition

adds AMD Northbridge config MSR definition

Signed-off-by: Stephane Eranian <eranian@gmail.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add cpu_has_arch_perfmon

adds cpu_has_arch_perfmon to test presence of architectural perfmon on
Intel x86 processor

Signed-off-by: Stephane Eranian <eranian@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: cleanup duplicate includes

Signed-off-by: Joe Perches <joe@perches.com>
 arch/x86/kernel/reboot.c      |    1 -
 include/asm-x86/elf.h         |    5 ++---
 include/asm-x86/posix_types.h |    8 +-------
 include/asm-x86/processor.h   |    3 +--
 include/asm-x86/unistd.h      |    8 +-------
 5 files changed, 5 insertions(+), 20 deletions(-)

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: coding style fixes to arch/x86/kernel/setup_32.c

Fix:

  ERROR: do not initialise externals to 0 or NULL

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: sort address_markers for dump_pagetables

otherwise Vmemmap and High Kernel Mapping string is not showing up.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce initial apicid

store initial_apicid from early identify. it is could be different from
phys_proc_id later.

also print it out in /proc/cpuinfo.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove mach_reboot.h

all reboot details are handled in reboot.c and quirks are handled
via reboot_fixups_32.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: enhance DEBUG_RODATA support for hotplug and kprobes

Standardize DEBUG_RODATA, removing special cases for hotplug and kprobes.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: pageexec@freemail.hu
Cc: akpm@linux-foundation.org
CC: Andi Kleen <andi@firstfloor.org>
CC: pageexec@freemail.hu
CC: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: enhance DEBUG_RODATA support - alternatives

Fix a memcpy that should be a text_poke (in apply_alternatives).

Use kernel_wp_save/kernel_wp_restore in text_poke to support DEBUG_RODATA
correctly and so the CPU HOTPLUG special case can be removed.

Add text_poke_early, for alternatives and paravirt boot-time and module load
time patching.

Changelog:

- Fix text_set and text_poke alignment check (mixed up bitwise and and or)
- Remove text_set
- Export add_nops, so it can be used by others.
- Document text_poke_early.
- Remove clflush, since it breaks some VIA architectures and is not strictly
  necessary.
- Add kerneldoc to text_poke and text_poke_early.
- Create a second vmap instead of using the WP bit to support Xen and VMI.
- Move local_irq disable within text_poke and text_poke_early to be able to
  be sleepable in these functions.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Andi Kleen <andi@firstfloor.org>
CC: pageexec@freemail.hu
CC: H. Peter Anvin <hpa@zytor.com>
CC: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: replace remaining __FUNCTION__ occurances

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: show apicid for cpu in proc

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix amd_detect_cmp

for system with apicid lifting, boot cpu apicid will be 4

got:

  CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  CPU: L2 Cache: 512K (64 bytes/line)
  CPU 0/4 -> Node 0
  CPU: Physical Processor ID: 1
  CPU: Processor Core ID: 0

so try to offset apicid back before get phys_proc_id with bits shift.
then we can get correct socket ID

also remove remove cpu_data(0) reference.

because cpu_data(0) only be ready after smp_prepare_cpus with the assignment
from boot_cpu_data to current_cpu_data aka cpu_data(0).

and check_bugs()==>identify_cpu(&boot_cpu_data) is quite before than
smp_prepare_cpus. So just use boot_cpu_id instead.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add KERN_INFO to show_unhandled_signals printout

Before:
   total: 0 errors, 1 warnings, 678 lines checked
After:
   total: 0 errors, 0 warnings, 678 lines checked

No code changed:

arch/x86/kernel/signal_32.o:

   text    data     bss     dec     hex filename
   5333       0       4    5337    14d9 signal_32.o.before
   5336       0       4    5340    14dc signal_32.o.after

md5:
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.before.asm
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move extern declaration to vdso.h

Before:
   total: 0 errors, 3 warnings, 685 lines checked
After:
   total: 0 errors, 1 warnings, 678 lines checked

No code changed:

arch/x86/kernel/signal_32.o:

   text    data     bss     dec     hex filename
   5333       0       4    5337    14d9 signal_32.o.before
   5333       0       4    5337    14d9 signal_32.o.after

md5:
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.before.asm
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up arch/x86/kernel/signal_32.c

Before:
   total: 21 errors, 6 warnings, 665 lines checked
After:
   total: 0 errors, 3 warnings, 685 lines checked

No code changed:

arch/x86/kernel/signal_32.o:

   text    data     bss     dec     hex filename
   5333       0       4    5337    14d9 signal_32.o.before
   5333       0       4    5337    14d9 signal_32.o.after

md5:
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.before.asm
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove DEBUG_SIG

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: arch/x86/kernel/cpu/feature_names.c - use angle brackets for include

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: include/asm-x86/mutex_32.h - use angle brackets for include

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up i387.c

minor coding style cleanups.

Before:
   total: 0 errors, 3 warnings, 479 lines checked
After:
   total: 0 errors, 1 warnings, 483 lines checked

No code changed:

arch/x86/kernel/i387.o:

   text    data     bss     dec     hex filename
   2379       4       8    2391     957 i387.o.before
   2379       4       8    2391     957 i387.o.after

md5:
   e1434553a3b4ff1f52ad97a68b1fad8a  i387.o.before.asm
   e1434553a3b4ff1f52ad97a68b1fad8a  i387.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add comments to processor.h

add comments to the FPU structures of processor.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use cpu_relax instead of rep_nop

This is done for smpboot_32.c

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use wait_for_init_deassert in x86_64

wraps the busy loop for wait_for_init_deasserted() in a function,
so smp_callin in x86_64 looks like more i386

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unify setup_trampoline

setup_trampoline() looks very similar between architectures, and this
patch unifies them. The i386 version allocates bootmem memory, while
the x86_64 version uses a fixed address.

In this patch, we initialize the global trampoline_base to the x86_64 version,
and i386 allocation can later override it.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: adapt voyager's setup_trampoline

make setup_trampoline non-static. This way, it won't conflict
with the extern declaration in smp.h

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: adapt voyager's trampoline_base

Change voyager's trampoline base to unsigned char *
instead of u32. This way, it won't conflict with
the other architectures when including smp.h

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move trampoline arrays extern definition to smp.h

In here, they can serve both architectures

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: make x86_64 accept the max_cpus parameter

The parameter passing parsing is done in the common smpboot.c

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge __cpu_disable and cpu_die

They are now equal, and are moved to a common file

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: do not clear cpu_online_map

it was already cleared two lines above, and so, this removal
is bogus

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use remove_from_maps in cpu_disable

it is already used in x86_64. In i386, it only
removes from cpu_online_map

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove vector_lock around cpu_online_map

This lock does not protect cpu_online_map, so its
length can be shortened, and in some cases, removed.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move cpu_coregroup_map to common file

it is equal between architectures

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move sibling functions to common file

set_cpu_sibling_map() and remove_sibling_info() are
equal between architectures, and are now moved to common
file

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move hotplug related extern definitions to smp.h

definitions that are inside CONFIG_HOTPLUG_CPU in
the arch-specific smp*.h files are moved to common
header

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: make remove_siblinginfo non-static

this is done to match i386

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>