Merge tag 'nvme-6.4-2023-04-14' of git://git.infradead.org/nvme into for-6.4/block

Pull NVMe updates from Christoph:

"nvme updates for Linux 6.4

 - drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
 - validate nvmet module parameters (Chaitanya Kulkarni)
 - fence TCP socket on receive error (Chris Leech)
 - fix async event trace event (Keith Busch)
 - minor cleanups (Chaitanya Kulkarni, zhenwei pi)
 - fix and cleanup nvmet Identify handling (Damien Le Moal,
   Christoph Hellwig)
 - fix double blk_mq_complete_request race in the timeout handler
   (Lei Yin)
 - fix irq locking in nvme-fcloop (Ming Lei)
 - remove queue mapping helper for rdma devices (Sagi Grimberg)"

* tag 'nvme-6.4-2023-04-14' of git://git.infradead.org/nvme:
  nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage"
  blk-mq-rdma: remove queue mapping helper for rdma devices
  nvme-rdma: minor cleanup in nvme_rdma_create_cq()
  nvme: fix double blk_mq_complete_request for timeout request with low probability
  nvme: fix async event trace event
  nvme-apple: return directly instead of else
  nvme-apple: return directly instead of else
  nvmet-tcp: validate idle poll modparam value
  nvmet-tcp: validate so_priority modparam value
  nvme-tcp: fence TCP socket on receive error
  nvmet: remove nvmet_req_cns_error_complete
  nvmet: rename nvmet_execute_identify_cns_cs_ns
  nvmet: fix Identify Identification Descriptor List handling
  nvmet: cleanup nvmet_execute_identify()
  nvmet: fix I/O Command Set specific Identify Controller
  nvmet: fix Identify Active Namespace ID list handling
  nvmet: fix Identify Controller handling
  nvmet: fix Identify Namespace handling
  nvmet: fix error handling in nvmet_execute_identify_cns_cs_ns()
  nvme-pci: drop redundant pci_enable_pcie_error_reporting()

block: null_blk: make fault-injection dynamically configurable per device

The null_blk driver has multiple driver-specific fault injection
mechanisms.  Each fault injection configuration can only be specified by a
module parameter and cannot be reconfigured without reloading the driver.
Also, each configuration is common to all devices and is initialized every
time a new device is added.

This change adds the following subdirectories for each null_blk device.

/sys/kernel/config/nullb/<disk>/timeout_inject
/sys/kernel/config/nullb/<disk>/requeue_inject
/sys/kernel/config/nullb/<disk>/init_hctx_fault_inject

Each fault injection attribute can be dynamically set per device by a
corresponding file in these directories.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20230327143733.14599-3-akinobu.mita@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

fault-inject: allow configuration via configfs

This provides a helper function to allow configuration of fault-injection
for configfs-based drivers.

The config items created by this function have the same interface as the
one created under debugfs by fault_create_debugfs_attr().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20230327143733.14599-2-akinobu.mita@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove __blk_mq_run_hw_queue

__blk_mq_run_hw_queue just contains a WARN_ON_ONCE for calls from
interrupt context and a blk_mq_run_dispatch_ops-protected call to
blk_mq_sched_dispatch_requests.  Open code the call to
blk_mq_sched_dispatch_requests in both callers, and move the WARN_ON_ONCE
to blk_mq_run_hw_queue where it can be extended to all !async calls,
while the other call is from workqueue context and thus obviously does
not need the assert.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: move the !async handling out of __blk_mq_delay_run_hw_queue

Only blk_mq_run_hw_queue can call __blk_mq_delay_run_hw_queue with
async=false, so move the handling there.

With this __blk_mq_delay_run_hw_queue can be merged into
blk_mq_delay_run_hw_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: move the blk_mq_hctx_stopped check in __blk_mq_delay_run_hw_queue

For the in-context dispatch, blk_mq_hctx_stopped is alredy checked in
blk_mq_sched_dispatch_requests under blk_mq_run_dispatch_ops() protection.
For the async dispatch case having a check before scheduling the work
still makes sense to avoid needless workqueue scheduling, so just keep it
for that case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove the blk_mq_hctx_stopped check in blk_mq_run_work_fn

blk_mq_hctx_stopped is already checked in blk_mq_sched_dispatch_requests
under blk_mq_run_dispatch_ops() protection, so remove the duplicate check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: cleanup __blk_mq_sched_dispatch_requests

__blk_mq_sched_dispatch_requests currently has duplicated logic
for the cases where requests are on the hctx dispatch list or not.
Merge the two with a new need_dispatch variable and remove a few
pointless local variables.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413060651.694656-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: pass a flags argument to blk_mq_add_to_requeue_list

Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: pass a flags argument to elevator_type->insert_requests

Instead of passing a bool at_head, pass down the full flags from the
blk_mq_insert_request interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: pass a flags argument to blk_mq_request_bypass_insert

Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: pass a flags argument to blk_mq_insert_request

Replace the at_head bool with a flags argument that so far only contains
a single BLK_MQ_INSERT_AT_HEAD value.  This makes it much easier to grep
for head insertions into the blk-mq dispatch queues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: don't kick the requeue_list in blk_mq_add_to_requeue_list

blk_mq_add_to_requeue_list takes a bool parameter to control how to kick
the requeue list at the end of the function.  Move the call to
blk_mq_kick_requeue_list to the callers that want it instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: don't run the hw_queue from blk_mq_request_bypass_insert

blk_mq_request_bypass_insert takes a bool parameter to control how to run
the queue at the end of the function.  Move the blk_mq_run_hw_queue call
to the callers that want it instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: don't run the hw_queue from blk_mq_insert_request

blk_mq_insert_request takes two bool parameters to control how to run
the queue at the end of the function.  Move the blk_mq_run_hw_queue call
to the callers that want it instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fold __blk_mq_try_issue_directly into its two callers

Due to the wildly different behavior based on the bypass_insert argument,
not a whole lot of code in __blk_mq_try_issue_directly is actually shared
between blk_mq_try_issue_directly and blk_mq_request_issue_directly.

Remove __blk_mq_try_issue_directly and fold the code into the two callers
instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: factor out a blk_mq_get_budget_and_tag helper

Factor out a helper from __blk_mq_try_issue_directly in preparation
of folding that function into its two callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: refactor the DONTPREP/SOFTBARRIER andling in blk_mq_requeue_work

Split the RQF_DONTPREP and RQF_SOFTBARRIER in separate branches to make
the code more readable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: refactor passthrough vs flush handling in blk_mq_insert_request

While both passthrough and flush requests call directly into
blk_mq_request_bypass_insert, the parameters aren't the same.
Split the handling into two separate conditionals and turn the whole
function into an if/elif/elif/else flow instead of the gotos.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove blk_flush_queue_rq

Just call blk_mq_add_to_requeue_list directly from the two callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fold __blk_mq_insert_req_list into blk_mq_insert_request

Remove this very small helper and fold it into the only caller.

Note that this moves the trace_block_rq_insert out of ctx->lock, matching
the other calls to this tracepoint.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fold __blk_mq_insert_request into blk_mq_insert_request

There is no good point in keeping the __blk_mq_insert_request around
for two function calls and a singler caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: move blk_mq_sched_insert_request to blk-mq.c

blk_mq_sched_insert_request is the main request insert helper and not
directly I/O scheduler related.  Move blk_mq_sched_insert_request to
blk-mq.c, rename it to blk_mq_insert_request and mark it static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fold blk_mq_sched_insert_requests into blk_mq_dispatch_plug_list

blk_mq_dispatch_plug_list is the only caller of
blk_mq_sched_insert_requests, and it makes sense to just fold it there
as blk_mq_sched_insert_requests isn't specific to I/O schedulers despite
the name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: move more logic into blk_mq_insert_requests

Move all logic related to the direct insert (including the call to
blk_mq_run_hw_queue) into blk_mq_insert_requests to streamline the code
flow up a bit, and to allow marking blk_mq_try_issue_list_directly
static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: include <linux/blk-mq.h> in block/blk-mq.h

block/blk-mq.h needs various definitions from <linux/blk-mq.h>,
include it there instead of relying on the source files to include
both.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove blk-mq-tag.h

blk-mq-tag.h is always included by blk-mq.h, and causes recursive
inclusion hell with further changes.  Just merge it into blk-mq.h
instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: don't plug for head insertions in blk_execute_rq_nowait

Plugs never insert at head, so don't plug for head insertions.

Fixes: 1c2d2fff6dc0 ("block: wire-up support for passthrough plugging")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-throttle: only enable blk-stat when BLK_DEV_THROTTLING_LOW

blk_throtl_register() will unconditionally enable blk-stat for gendisk
when register, even when we have no BLK_DEV_THROTTLING_LOW config.

Since the kernel always has only BLK_DEV_THROTTLING config and the
BLK_DEV_THROTTLING_LOW config is still in EXPERIMENTAL state, we can
just skip blk-stat when !BLK_DEV_THROTTLING_LOW.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-stat: fix QUEUE_FLAG_STATS clear

We need to set QUEUE_FLAG_STATS for two cases:
1. blk_stat_enable_accounting()
2. blk_stat_add_callback()

So we should clear it only when ((q->stats->accounting == 0) &&
list_empty(&q->stats->callbacks)).

blk_stat_disable_accounting() only check if q->stats->accounting
is 0 before clear the flag, this patch fix it.

Also add list_empty(&q->stats->callbacks)) check when enable, or
the flag is already set.

The bug can be reproduced on kernel without BLK_DEV_THROTTLING
(since it unconditionally enable accounting, see the next patch).

  # cat /sys/block/sr0/queue/scheduler
  none mq-deadline [bfq]

  # cat /sys/kernel/debug/block/sr0/state
  SAME_COMP|IO_STAT|INIT_DONE|STATS|REGISTERED|NOWAIT|30

  # echo none > /sys/block/sr0/queue/scheduler

  # cat /sys/kernel/debug/block/sr0/state
  SAME_COMP|IO_STAT|INIT_DONE|REGISTERED|NOWAIT

  # cat /sys/block/sr0/queue/wbt_lat_usec
  75000

We can see that after changing elevator from "bfq" to "none",
"STATS" flag is lost even though WBT callback still need it.

Fixes: 68497092bde9 ("block: make queue stat accounting a reference")
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iolatency: Make initialization lazy

Other rq_qos policies such as wbt and iocost are lazy-initialized when they
are configured for the first time for the device but iolatency is
initialized unconditionally from blkcg_init_disk() during gendisk init. Lazy
init is beneficial because rq_qos policies add runtime overhead when
initialized as every IO has to walk all registered rq_qos callbacks.

This patch switches iolatency to lazy initialization too so that it only
registered its rq_qos policy when it is first configured.

Note that there is a known race condition between blkcg config file writes
and del_gendisk() and this patch makes iolatency susceptible to it by
exposing the init path to race against the deletion path. However, that
problem already exists in iocost and is being worked on.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230413000649.115785-5-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iolatency: s/blkcg_rq_qos/iolat_rq_qos/

The name was too generic given that there are multiple blkcg rq-qos
policies.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230413000649.115785-4-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: Restructure blkg_conf_prep() and friends

We want to support lazy init of rq-qos policies so that iolatency is enabled
lazily on configuration instead of gendisk initialization. The way blkg
config helpers are structured now is a bit awkward for that. Let's
restructure:

* blkcg_conf_open_bdev() is renamed to blkg_conf_open_bdev(). The blkcg_
  prefix was used because the bdev opening step is blkg-independent.
  However, the distinction is too subtle and confuses more than helps. Let's
  switch to blkg prefix so that it's consistent with the type and other
  helper names.

* struct blkg_conf_ctx now remembers the original input string and is always
  initialized by the new blkg_conf_init().

* blkg_conf_open_bdev() is updated to take a pointer to blkg_conf_ctx like
  blkg_conf_prep() and can be called multiple times safely. Instead of
  modifying the double pointer to input string directly,
  blkg_conf_open_bdev() now sets blkg_conf_ctx->body.

* blkg_conf_finish() is renamed to blkg_conf_exit() for symmetry and now
  must be called on all blkg_conf_ctx's which were initialized with
  blkg_conf_init().

Combined, this allows the users to either open the bdev first or do it
altogether with blkg_conf_prep() which will help implementing lazy init of
rq-qos policies.

blkg_conf_init/exit() will also be used implement synchronization against
device removal. This is necessary because iolat / iocost are configured
through cgroupfs instead of one of the files under /sys/block/DEVICE. As
cgroupfs operations aren't synchronized with block layer, the lazy init and
other configuration operations may race against device removal. This patch
makes blkg_conf_init/exit() used consistently for all cgroup-orginating
configurations making them a good place to implement explicit
synchronization.

Users are updated accordingly. No behavior change is intended by this patch.

v2: bfq wasn't updated in v1 causing a build error. Fixed.

v3: Update the description to include future use of blkg_conf_init/exit() as
    synchronization points.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230413000649.115785-3-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()

Now that all RCU flavors have been combined either holding a spin lock,
disabling irq or disabling preemption implies RCU read lock, so there's no
need to use rcu_read_[un]lock() explicitly while holding queue_lock. This
shouldn't cause any behavior changes.

v2: Description updated. Leave __acquires/release on queue_lock alone.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230413000649.115785-2-tj@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage"

fcloop_fcp_op() could be called from flush request's ->end_io(flush_end_io) in
which the spinlock of fq->mq_flush_lock is grabbed with irq saved/disabled.

So fcloop_fcp_op() can't call spin_unlock_irq(&tfcp_req->reqlock) simply
which enables irq unconditionally.

Fixes the warning by switching to spin_lock_irqsave()/spin_unlock_irqrestore()

Fixes: c38dbbfab1bc ("nvme-fcloop: fix inconsistent lock state warnings")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

blk-mq-rdma: remove queue mapping helper for rdma devices

No rdma device exposes its irq vectors affinity today. So the only
mapping that we have left, is the default blk_mq_map_queues, which
we fallback to anyways. Also fixup the only consumer of this helper
(nvme-rdma).

Remove this now dead code.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-rdma: minor cleanup in nvme_rdma_create_cq()

Before cleanup:
enum ib_poll_context poll_ctx;

if (nvme_rdma_poll_queue(queue)) {
        poll_ctx = IB_POLL_DIRECT;
        queue->ib_cq = ib_alloc_cq(ibdev, queue, queue->cq_size,
                                   comp_vector, poll_ctx);
} else {
        poll_ctx = IB_POLL_SOFTIRQ;
        queue->ib_cq = ib_cq_pool_get(ibdev, queue->cq_size,
                                      comp_vector, poll_ctx);
}

After cleanup:
if (nvme_rdma_poll_queue(queue))
        queue->ib_cq = ib_alloc_cq(ibdev, queue, queue->cq_size,
                                   comp_vector, IB_POLL_DIRECT);
else
        queue->ib_cq = ib_cq_pool_get(ibdev, queue->cq_size,
                                      comp_vector, IB_POLL_SOFTIRQ);

IB_POLL_SOFTIRQ/IB_POLL_SOFTIRQ gets used directly in function, this
seems more accessible.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: fix double blk_mq_complete_request for timeout request with low probability

When nvme_cancel_tagset traverses all tagsets and executes
nvme_cancel_request, this request may be executing blk_mq_free_request
that is called by nvme_rdma_complete_timed_out/nvme_tcp_complete_timed_out.
When blk_mq_free_request executes to WRITE_ONCE(rq->state, MQ_RQ_IDLE) and
__blk_mq_free_request(rq), it will cause double blk_mq_complete_request for
this request, and it will cause a null pointer error in the second
execution of this function because rq->mq_hctx has set to NULL in first
execution.

Signed-off-by: Lei Yin <yinlei2@lenovo.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: fix async event trace event

Mixing AER Event Type and Event Info has masking clashes. Just print the
event type, but also include the event info of the AER result in the
trace.

Fixes: 09bd1ff4b15143b ("nvme-core: add async event trace helper")
Reported-by: Nate Thornton <nate.thornton@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-apple: return directly instead of else

There is no need for the else when direct return is used at the end of
the function.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-apple: return directly instead of else

There is no need for the else when direct return is used at the end of
the function.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet-tcp: validate idle poll modparam value

The module parameter idle_poll_period_usecs is passed to the function
usecs_to_jiffies() which has following prototype and expect
idle_poll_period_usecs arg type to be unsigned int:-

unsigned long usecs_to_jiffies(const unsigned int u);

Use similar module parameter validation callback as previous patch.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet-tcp: validate so_priority modparam value

The module parameter so_priority is passed to the function
sock_set_priority() which has following prototype and expect
priotity arg type to be u32:-

void sock_set_priority(struct sock *sk, u32 priority);

Add a module parameter validation callback to reject any negative
values for the so_priority as it is defigned as int. Use this
oppurtunity to update the module parameter description and print the
default value.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-tcp: fence TCP socket on receive error

Ensure that no further socket reads occur after a receive processing
error, either from io_work being re-scheduled or nvme_tcp_poll.

Failing to do so can result in unrecognised PDU payloads or TCP stream
garbage being processed as a C2H data PDU, and potentially start copying
the payload to an invalid destination after looking up a request using a
bogus command id.

Signed-off-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: remove nvmet_req_cns_error_complete

Just fold it into the only caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

nvmet: rename nvmet_execute_identify_cns_cs_ns

nvmet_execute_identify_ns_zns is a more descriptive name for the
function handling the "I/O Command Set Specific Identify Namespace
Data Structure for the Zoned Namespace Command Set".

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

nvmet: fix Identify Identification Descriptor List handling

The Identification Descriptor List CNS value does not check the CSI
value, so remove the code trying to handle it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

nvmet: cleanup nvmet_execute_identify()

Change the order of the cases in nvmet_execute_identify() main
switch-case to match the NVMe 2.0 specification order as defined in
table 273. This is also the increasing order of CNS values.

While at it, for clarity, make it explicit that identify with cns set
to NVME_ID_CNS_CS_NS does not support NVM command set specific data.

No functional changes are introduced by this cleanup.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix I/O Command Set specific Identify Controller

For an identify command with cns set to NVME_ID_CNS_CS_CTRL, the NVMe
2.0 specification states that:

If the I/O Command Set specified by the CSI field does not have an
Identify Controller data structure, then the controller shall return
a zero filled data structure. If the host requests a data structure for
an I/O Command Set that the controller does not support, the controller
shall abort the command with a status code of Invalid Field in Command.

However, the current implementation of this identify command in
nvmet_execute_identify() only handles the ZNS command set, returning an
error for the NVM command set, which is not compliant with the
specifications as we do support this command set.

Fix this by:
1) Renaming nvmet_execute_identify_cns_cs_ctrl() to
   nvmet_execute_identify_ctrl_zns() to continue handling the
   ZNS command set as is.
2) Introduce a nvmet_execute_identify_ctrl_ns() helper to handle the
   NVM command set, returning a zero filled nvme_id_ctrl_nvm data
   structure.
3) Modify nvmet_execute_identify() to call these helpers based on
   the csi specified, returning an error for unsupported command sets.

Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix Identify Active Namespace ID list handling

The identify command with cns set to NVME_ID_CNS_NS_ACTIVE_LIST does
not depend on the command set. The execution of this command should
thus not look at the csi field specified in the command. Simplify
nvmet_execute_identify() to directly call
nvmet_execute_identify_nslist() without the csi switch-case.

Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix Identify Controller handling

The identify command with cns set to NVME_ID_CNS_CTRL does not depend on
the command set. The execution of this command should thus not look at
the csi specified in the command. Simplify nvmet_execute_identify() to
directly call nvmet_execute_identify_ctrl() without the csi switch-case.

Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix Identify Namespace handling

The identify command with cns set to NVME_ID_CNS_NS does not directly
depend on the command set. The NVMe specifications is rather confusing
here as it appears that this command only applies to the NVM command
set. However, footnote 8 of Figure 273 in the NVMe 2.0 base
specifications clearly state that this command applies to NVM command
sets that support logical blocks, that is, NVM and ZNS. Both the NVM and
ZNS command set specifications also list this identify as mandatory.

The command handling should thus not look at the csi field since it is
defined as unused for this command. Given that we do not support the
KV command set, simply remove the csi switch-case for that command
handling and call directly nvmet_execute_identify_ns() in
nvmet_execute_identify().

Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: fix error handling in nvmet_execute_identify_cns_cs_ns()

Nvme specifications state that:

If the I/O Command Set associated with the namespace identified by the
NSID field does not support the Identify Namespace data structure
specified by the CSI field, the controller shall abort the command with
a status code of Invalid Field in Command.

In other words, if nvmet_execute_identify_cns_cs_ns() is called for a
target with a block device that is not zoned, we should not return any
data and set the status to NVME_SC_INVALID_FIELD.

While at it, it is also better to revalidate the ns block devie *before*
checking if the block device is zoned, to ensure that
nvmet_execute_identify_cns_cs_ns() operates against updated device
characteristics.

Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-pci: drop redundant pci_enable_pcie_error_reporting()

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

s390/dasd: fix hanging blockdevice after request requeue

The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.

Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.

Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add autoquiesce event for start IO error

Add a check for errors in the start_io function that signal a not
working device. Trigger an autoquiesce event in that case.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-7-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add aq_timeouts autoquiesce trigger

Add a sysfs attribute aq_timeouts that controls after how many
timeouts a autoquiesce event might be triggered.

The default value is 32768 which is the maximum number of retries
for the DASD device driver DASD_RETRIES_MAX. This means that the
timeout trigger will never happen.

The default value for DASD retries is 255.
Setting the value to below 255 will trigger the timeout autoquiesce
event before an IO error is generated.

Also add the check for the configured amount of timeouts and trigger
an autoquiesce event if exceeded.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add aq_requeue sysfs attribute

Add a sysfs attribute to control if all IO requests will be requeued to
the blocklayer in case of an autoquiesce event or not.

A value of 1 means that in case of an autoquiesce event all IO requests
will be requeued to the blocklayer.

A value of 0 means that the device will only be stopped.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add aq_mask sysfs attribute

Add sysfs attribute that controls the DASD autoquiesce feature.
The autoquiesce is disabled when 0 is echoed to the attribute.

A value greater than 0 will enable the feature.
The aq_mask attribute will accept an unsigned integer and the value
will be interpreted as bitmask defining the trigger events that will
lead to an automatic quiesce.

The following autoquiesce triggers will currently be available:

DASD_EER_FATALERROR  1 - any final I/O error
DASD_EER_NOPATH      2 - no remaining paths for the device
DASD_EER_STATECHANGE 3 - a state change interrupt occurred
DASD_EER_PPRCSUSPEND 4 - the device is PPRC suspended
DASD_EER_NOSPC       5 - there is no space remaining on an ESE device
DASD_EER_TIMEOUT     6 - a certain amount of timeouts occurred
DASD_EER_STARTIO     7 - the IO start function encountered an error

The currently supported maximum value is 255.

Bit 31 is reserved for internal usage.
Bit 0 is not used.

Example:

 - deactivate autoquiesce
   $ echo 0 > /sys/bus/ccw/0.0.1234/aq_mask

 - enable autoquiesce for FATALERROR, NOPATH and TIMEOUT
   (0000 0000 0000 0000  0000 0000 0100 0110 => 70)
   $ echo 70 > /sys/bus/ccw/0.0.1234/aq_mask

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: add autoquiesce feature

Add the internal logic to check for autoquiesce triggers and handle
them.

Quiesce and resume are functions that tell Linux to stop/resume
issuing I/Os to a specific DASD.
The DASD driver allows a manual quiesce/resume via ioctl.

Autoquiesce will define an amount of triggers that will lead to
an automatic quiesce if a certain event occurs.
There is no automatic resume.

All events will be reported via DASD Extended Error Reporting (EER)
if configured.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: remove unused DASD EER defines

Remove definitions that have never been used.

Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: delete cpd_init_fn of blkcg_policy

blkcg_policy cpd_init_fn() is used to just initialize some default
fields of policy data, which is enough to do in cpd_alloc_fn().

This patch delete the only user bfq_cpd_init(), and remove cpd_init_fn
from blkcg_policy.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230406145050.49914-4-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: delete cpd_bind_fn of blkcg_policy

cpd_bind_fn is just used for update default weight when block
subsys attached to a hierarchy. No any policy need it anymore.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230406145050.49914-3-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block, bfq: remove BFQ_WEIGHT_LEGACY_DFL

BFQ_WEIGHT_LEGACY_DFL is the same as CGROUP_WEIGHT_DFL, which means
we don't need cpd_bind_fn() callback to update default weight when
attached to a hierarchy.

This patch remove BFQ_WEIGHT_LEGACY_DFL and cpd_bind_fn().

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230406145050.49914-2-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: Add command to read locking range parameters.

It returns following attributes:

locking range start
locking range length
read lock enabled
write lock enabled
lock state (RW, RO or LK)

It can be retrieved by user authority provided the authority
was added to locking range via prior IOC_OPAL_ADD_USR_TO_LR
ioctl command. The command was extended to add user in ACE that
allows to read attributes listed above.

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20230405111223.272816-6-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: add helper to get multiple columns at once.

Refactors current code querying single column to use the
new helper. Real multi column usage will be added later.

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230405111223.272816-5-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: allow user authority to get locking range attributes.

Extend ACE set of locking range attributes accessible to user
authority. This patch allows user authority to get following
locking range attribues when user get added to locking range via
IOC_OPAL_ADD_USR_TO_LR:

locking range start
locking range end
read lock enabled
write lock enabled
read locked
write locked
lock on reset
active key

Note: Admin1 authority always remains in the ACE. Otherwise
it breaks current userspace expecting Admin1 in the ACE (sedutils).

See TCG OPAL2 s.4.3.1.7 "ACE_Locking_RangeNNNN_Get_RangeStartToActiveKey".

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230405111223.272816-4-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: add helper for adding user authorities in ACE.

Move ACE construction away from add_user_to_lr routine
and refactor it to be used also in later code.

Also adds boolean operators defines from TCG Core
specification.

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20230405111223.272816-3-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sed-opal: do not add same authority twice in boolean ace.

While adding user authority in boolean ace value
of uid OPAL_LOCKINGRANGE_ACE_WRLOCKED or
OPAL_LOCKINGRANGE_ACE_RDLOCKED, it was added twice.

It seemed redundant when only single authority was added
in the set method aka { authority1, authority1, OR }:

TCG Storage Architecture Core Specification, 5.1.3.3 ACE_expression

"This is an alternative type where the options are either a uidref to an
Authority object or one of the boolean_ACE (AND = 0 and OR = 1) options.
This type is used within the AC_element list to form a postfix Boolean
expression of Authorities."

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230405111223.272816-2-okozina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: ublk_drv: cleanup 'struct ublk_map_data'

'struct ublk_map_data' is passed to ublk_copy_user_pages()
for copying data between userspace buffer and request pages.

Here what matters is userspace buffer address/len and 'struct request',
so replace ->io field with user buffer address, and rename max_bytes
as len.

Meantime remove 'ubq' field from ublk_map_data, since it isn't used
any more.

Then code becomes more readable.

Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: ublk_drv: clean up several helpers

Convert the following pattern in several helpers
if (Z)
return true
return false
into:
return Z;

Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: ublk_drv: add two helpers to clean up map/unmap request

Add two helpers for checking if map/unmap is needed, since we may have
passthrough request which needs map or unmap in future, such as for
supporting report zones.

Meantime don't mark ublk_copy_user_pages as inline since this function
is a bit fat now.

Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: ublk_drv: don't consider flush request in map/unmap io

There isn't data in request of REQ_OP_FLUSH always, so don't consider
it in both ublk_map_io() and ublk_unmap_io().

Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: ublk_drv: add common exit handling

Simplify exit handling a bit, and prepare for supporting fused command.

Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Pass a peer device to the resync and online verify functions

Originally-from: Andreas Grünbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: pass drbd_peer_device to __req_mod

In preparation to support multiple connections, we need to know which
one we need to modify the request state for.

Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: drbd_uuid_compare: pass a peer_device

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: INFO_bm_xfer_stats(): Pass a peer device argument

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Add peer device parameter to whole-bitmap I/O handlers

Pass a peer device parameter through the bitmap I/O functions to the I/O
handlers.  In after_state_ch(), set that parameter when queuing the
drbd_send_bitmap operation so that this operation knows where to send the
bitmap.

Signed-off-by: Andreas Gruenbacher <agruen@kernel.org>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: Rip out the ERR_IF_CNT_IS_NEGATIVE macro

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

genetlink: make _genl_cmd_to_str static

Primarily to silence warnings like:
warning: no previous prototype for 'xxx_genl_cmd_to_str' [-Wmissing-prototypes]

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: use kmap_local_page() and kunmap_local()

Replace the deprecated API kmap_atomic() and kunmap_atomic() with
kmap_local_page() and kunmap_local() in null_flush_cache_page().

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230330184926.64209-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: use non-deprecated lib functions

Use library helper memcpy_page() to copy source page into destination
instead of having duplicate code in copy_to_nullb() & copy_from_nullb().
In copy_from_nullb() also replace the memset call with zero_user().

Use library helper memset_page() to set the buffer to 0xFF instead of
having duplicate code.

This also removes deprecated API kmap_atomic() from copy_to_nullb()
copy_from_nullb() and nullb_fill_pattern(),
from :include/linux/highmem.h:
"kmap_atomic - Atomically map a page for temporary usage - Deprecated!"

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230330184926.64209-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: open code __blk_account_io_done()

There is only one caller for __blk_account_io_done(), the function
is small enough to fit in its caller blk_account_io_done().

Remove the function and opencode in the its caller
blk_account_io_done().

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: open code __blk_account_io_start()

There is only one caller for __blk_account_io_start(), the function
is small enough to fit in its caller blk_account_io_start().

Remove the function and opencode in the its caller
blk_account_io_start().

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: remove hybrid polling

io_uring provides the only way user space can poll completions, and that
always sets BLK_POLL_NOSLEEP. This effectively makes hybrid polling dead
code, so remove it and everything supporting it.

Hybrid polling was effectively killed off with 9650b453a3d4b1, "block:
ignore RWF_HIPRI hint for sync dio", but still potentially reachable
through io_uring until d729cf9acb93119, "io_uring: don't sleep when
polling for I/O", but hybrid polling probably should not have been
reachable through that async interface from the beginning.

Fixes: 9650b453a3d4 ("block: ignore RWF_HIPRI hint for sync dio")
Fixes: d729cf9acb93 ("io_uring: don't sleep when polling for I/O")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20230320194926.3353144-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: drop the NULL check from blk_crypto_put_keyslot()

Now that all callers of blk_crypto_put_keyslot() check for NULL before
calling it, there is no need for blk_crypto_put_keyslot() to do the NULL
check itself.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: return actual keyslot error in blk_insert_cloned_request()

To avoid hiding information, pass on the error code from
blk_crypto_rq_get_keyslot() instead of always using BLK_STS_IOERR.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: remove blk_crypto_insert_cloned_request()

blk_crypto_insert_cloned_request() is the same as
blk_crypto_rq_get_keyslot(), so just use that directly.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: make blk_crypto_evict_key() more robust

If blk_crypto_evict_key() sees that the key is still in-use (due to a
bug) or that ->keyslot_evict failed, it currently just returns while
leaving the key linked into the keyslot management structures.

However, blk_crypto_evict_key() is only called in contexts such as inode
eviction where failure is not an option.  So actually the caller
proceeds with freeing the blk_crypto_key regardless of the return value
of blk_crypto_evict_key().

These two assumptions don't match, and the result is that there can be a
use-after-free in blk_crypto_reprogram_all_keys() after one of these
errors occurs.  (Note, these errors *shouldn't* happen; we're just
talking about what happens if they do anyway.)

Fix this by making blk_crypto_evict_key() unlink the key from the
keyslot management structures even on failure.

Also improve some comments.

Fixes: 1b2628397058 ("block: Keyslot Manager for Inline Encryption")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: make blk_crypto_evict_key() return void

blk_crypto_evict_key() is only called in contexts such as inode eviction
where failure is not an option.  So there is nothing the caller can do
with errors except log them.  (dm-table.c does "use" the error code, but
only to pass on to upper layers, so it doesn't really count.)

Just make blk_crypto_evict_key() return void and log errors itself.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: release crypto keyslot before reporting I/O complete

Once all I/O using a blk_crypto_key has completed, filesystems can call
blk_crypto_evict_key().  However, the block layer currently doesn't call
blk_crypto_put_keyslot() until the request is being freed, which happens
after upper layers have been told (via bio_endio()) the I/O has
completed.  This causes a race condition where blk_crypto_evict_key()
can see 'slot_refs != 0' without there being an actual bug.

This makes __blk_crypto_evict_key() hit the
'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without
doing anything, eventually causing a use-after-free in
blk_crypto_reprogram_all_keys().  (This is a very rare bug and has only
been seen when per-file keys are being used with fscrypt.)

There are two options to fix this: either release the keyslot before
bio_endio() is called on the request's last bio, or make
__blk_crypto_evict_key() ignore slot_refs.  Let's go with the first
solution, since it preserves the ability to report bugs (via
WARN_ON_ONCE) where a key is evicted while still in-use.

Fixes: a892c8d52c02 ("block: Inline encryption support for blk-mq")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nbd: use the structured req attr check

Use the macro for checking presence of required attributes.
It has the advantage of reporting to the user which attr
was missing in a machine-readable format (extack).

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230224021301.1630703-2-kuba@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nbd: allow genl access outside init_net

NBD doesn't have much to do with networking, allow users outside
init_net to access the family.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230224021301.1630703-1-kuba@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Linux 6.3-rc2

wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"

This reverts part of commit 015b8cc5e7c4 ("wifi: cfg80211: Fix use after
free for wext")

This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'tpm-v6.3-rc3' of git://git./linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
 "Two additional bug fixes for v6.3"

* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: disable hwrng for fTPM on some AMD designs
  tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

tpm: disable hwrng for fTPM on some AMD designs

AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS.  This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.

This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.

So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions.  As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.

It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.

Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it.  If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.

Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.

Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Merge tag 'xfs-6.3-fixes-1' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:

 - Fix a crash if mount time quotacheck fails when there are inodes
   queued for garbage collection.

 - Fix an off by one error when discarding folios after writeback
   failure.

* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix off-by-one-block in xfs_discard_folio()
  xfs: quotacheck failure can race with background inode inactivation