Alex Dewar [Mon, 14 Sep 2020 21:42:44 +0000 (22:42 +0100)]
mtd: rawnand: atmel: Check return values for nand_read_data_op
In atmel_nand_pmecc_read_pg(), nand_read_data_op() is called twice
without the return values being checked for errors. Add these checks.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200914214245.14626-1-alex.dewar90@gmail.com
YueHaibing [Wed, 9 Sep 2020 13:43:18 +0000 (21:43 +0800)]
mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()
commit
ecc40b8df59a ("mtd: rawnand: vf610_nfc: remove old hooks")
left behind this, remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200909134318.36340-1-yuehaibing@huawei.com
Krzysztof Kozlowski [Tue, 1 Sep 2020 14:25:35 +0000 (16:25 +0200)]
mtd: rawnand: qcom: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-6-krzk@kernel.org
Krzysztof Kozlowski [Tue, 1 Sep 2020 14:25:34 +0000 (16:25 +0200)]
mtd: rawnand: marvell: Fix and update kerneldoc
Fix kerneldoc comments and add missing documentation for members to fix
W=1 compile warnings like:
drivers/mtd/nand/raw/marvell_nand.c:251: warning:
cannot understand function prototype: 'struct marvell_hw_ecc_layout '
drivers/mtd/nand/raw/marvell_nand.c:342: warning:
Function parameter or member 'layout' not described in 'marvell_nand_chip'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-5-krzk@kernel.org
Krzysztof Kozlowski [Tue, 1 Sep 2020 14:25:33 +0000 (16:25 +0200)]
mtd: rawnand: marvell: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-4-krzk@kernel.org
Krzysztof Kozlowski [Tue, 1 Sep 2020 14:25:32 +0000 (16:25 +0200)]
mtd: rawnand: gpmi: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-3-krzk@kernel.org
Krzysztof Kozlowski [Tue, 1 Sep 2020 14:25:31 +0000 (16:25 +0200)]
mtd: rawnand: atmel: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-2-krzk@kernel.org
Krzysztof Kozlowski [Tue, 1 Sep 2020 14:25:30 +0000 (16:25 +0200)]
mtd: onenand: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-1-krzk@kernel.org
Chris Packham [Fri, 28 Aug 2020 01:12:37 +0000 (13:12 +1200)]
mtd: rawnand: marvell: Support panic_write for mtdoops
Under a panic context we can't get an interrupt. Actively poll for the
RB status when performing a panic_write.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200828011237.22066-1-chris.packham@alliedtelesis.co.nz
Hauke Mehrtens [Thu, 20 Aug 2020 16:51:21 +0000 (18:51 +0200)]
mtd: spinand: gigadevice: Add support for GD5F4GQ4xC
This adds support for the following 4GiB chips:
GD5F4GQ4RCYIG 1.8V
GD5F4GQ4UCYIG 3.3V
The datasheet can be found here:
https://www.novitronic.ch/sixcms/media.php/2/DS-00173-GD5F4GQ4xCxIG-Rev1.574695.pdf
The GD5F4GQ4UCYIGT (3.3V) version is used on the Imagination
Technologies Creator Ci40 (Marduk), the 1.8V version was not tested.
This device only works in single SPI mode and not in dual or quad mode
for me on this board.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-4-hauke@hauke-m.de
Hauke Mehrtens [Thu, 20 Aug 2020 16:51:20 +0000 (18:51 +0200)]
mtd: spinand: gigadevice: Add QE Bit
The following GigaDevice chips have the QE BIT in the feature flags, I
checked the datasheets, but did not try this.
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG
The Quad operations like 0xEB mention that the QE bit has to be set.
Fixes:
c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-3-hauke@hauke-m.de
Hauke Mehrtens [Thu, 20 Aug 2020 16:51:19 +0000 (18:51 +0200)]
mtd: spinand: gigadevice: Only one dummy byte in QUADIO
The datasheet only lists one dummy byte in the 0xEH operation for the
following chips:
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG
Fixes:
c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-2-hauke@hauke-m.de
Evgeny Novikov [Thu, 6 Aug 2020 07:26:34 +0000 (10:26 +0300)]
mtd: rawnand: vf610: disable clk on error handling path in probe
vf610_nfc_probe() does not invoke clk_disable_unprepare() on one error
handling path. The patch fixes that.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes:
6f0ce4dfc5a3 ("mtd: rawnand: vf610: Avoid a potential NULL pointer dereference")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200806072634.23528-1-novikov@ispras.ru
Pavel Machek [Fri, 24 Jul 2020 08:38:25 +0000 (10:38 +0200)]
mtd: rawnand: oxnas: cleanup/simplify code
Simplify oxnas_nand_probe.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200724083825.GA31437@amd
YouChing Lin [Wed, 22 Jul 2020 08:02:58 +0000 (16:02 +0800)]
mtd: spinand: macronix: Add support for MX31UF1GE4BC
The Macronix MX31UF1GE4BC is a 1.8V, 1Gbit (128MB) serial
NAND flash device.
Validated by read, erase, read back, write and read back
on Xilinx Zynq PicoZed FPGA board which included
Macronix SPI Host (driver/spi/spi-mxic.c).
Signed-off-by: YouChing Lin <ycllin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1595404978-31079-3-git-send-email-ycllin@mxic.com.tw
YouChing Lin [Wed, 22 Jul 2020 08:02:57 +0000 (16:02 +0800)]
mtd: spinand: macronix: Add support for MX31LF1GE4BC
The Macronix MX31LF1GE4BC is a 3V, 1Gbit (128MB) serial
NAND flash device.
Validated by read, erase, read back, write and read back
on Xilinx Zynq PicoZed FPGA board which included
Macronix SPI Host (driver/spi/spi-mxic.c).
Signed-off-by: YouChing Lin <ycllin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1595404978-31079-2-git-send-email-ycllin@mxic.com.tw
Wei Yongjun [Tue, 21 Jul 2020 15:16:57 +0000 (23:16 +0800)]
mtd: rawnand: pasemi: Make pasemi_device_ready() static
The sparse tool complains as follows:
drivers/mtd/nand/raw/pasemi_nand.c:71:5: warning:
symbol 'pasemi_device_ready' was not declared. Should it be static?
This function is not used outside of pasemi_nand.c, so this commit
marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200721151657.41027-1-weiyongjun1@huawei.com
Christophe Kerello [Tue, 21 Jul 2020 09:52:07 +0000 (11:52 +0200)]
mtd: rawnand: stm32_fmc2: fix a buffer overflow
This patch solves following static checker warning:
drivers/mtd/nand/raw/stm32_fmc2_nand.c:350 stm32_fmc2_nfc_select_chip()
error: buffer overflow 'nfc->data_phys_addr' 2 <= 2
The CS value can only be 0 or 1.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Fixes:
2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1595325127-32693-1-git-send-email-christophe.kerello@st.com
Boris Brezillon [Mon, 20 Jul 2020 13:13:56 +0000 (16:13 +0300)]
mtd: rawnand: atmel: Get rid of the legacy interface implementation
Now that exec_op() is implemented, we can get rid of all the legacy
hooks.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-7-tudor.ambarus@microchip.com
Boris Brezillon [Mon, 20 Jul 2020 13:13:55 +0000 (16:13 +0300)]
mtd: rawnand: atmel: Convert the driver to exec_op()
Both SMC and HSMC are converted to exec_op().
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-6-tudor.ambarus@microchip.com
Boris Brezillon [Mon, 20 Jul 2020 13:13:54 +0000 (16:13 +0300)]
mtd: rawnand: atmel: Use nand_prog_page_end_op()
The nand_prog_page_end_op() sequence is open-coded in
atmel_hsmc_nand_pmecc_write_pg(). Let's use the generic helper here.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-5-tudor.ambarus@microchip.com
Boris Brezillon [Mon, 20 Jul 2020 13:13:53 +0000 (16:13 +0300)]
mtd: rawnand: atmel: Use nand_{write,read}_data_op()
Use the nand_{write,read}_data_op() helpers instead of calling the
atmel_nand_{read,write}_buf() functions directly. This will ease the
transition to exec_op().
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-4-tudor.ambarus@microchip.com
Boris Brezillon [Mon, 20 Jul 2020 13:13:52 +0000 (16:13 +0300)]
mtd: rawnand: atmel: Drop redundant nand_read_page_op()
The legacy page read path in atmel_hsmc_nand_pmecc_read_pg() issues
a nand_read_page_op() that's already issued by
atmel_nand_pmecc_read_pg(). Let's get rid of the unneeded one.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-3-tudor.ambarus@microchip.com
Boris Brezillon [Mon, 20 Jul 2020 13:13:51 +0000 (16:13 +0300)]
mtd: rawnand: atmel: Enable the NFC controller at probe time
No need to enable it everytime select_chip() is called. If we really
care about PM, we should implement runtime PM hooks and disable the
controller and all its clocks when the controller has been unused for
some time.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-2-tudor.ambarus@microchip.com
Miquel Raynal [Thu, 27 Aug 2020 08:52:08 +0000 (10:52 +0200)]
mtd: rawnand: Use the NAND framework user_conf object for ECC flags
Instead of storing the ECC flags in chip->ecc.options, use
nanddev->ecc.user_conf.flags.
There is currently only one to save: NAND_ECC_MAXIMIZE.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-21-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:52:07 +0000 (10:52 +0200)]
mtd: rawnand: Use the ECC framework user input parsing bits
Many helpers are generic to all NAND chips, they should not be
raw-NAND specific, so use the generic ones.
To avoid moving all the raw NAND core "history" into the generic NAND
layer, we keep a part of this parsing in the raw NAND core to ensure
backward compatibility.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-20-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:52:06 +0000 (10:52 +0200)]
mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper
Plus, the new helper has a more "english" name.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-19-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:52:05 +0000 (10:52 +0200)]
mtd: rawnand: Use the ECC framework OOB layouts
No need to have our own in the raw NAND core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-18-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:52:04 +0000 (10:52 +0200)]
mtd: rawnand: Make use of the ECC framework
Just enable the ECC framework with raw NAND so that we can drop, one
by one, all the unnecessary/redundant definitions.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-17-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:52:03 +0000 (10:52 +0200)]
mtd: nand: Use the new generic ECC object
Embed a generic NAND ECC high-level object in the nand_device
structure to carry all the ECC engine configuration/data.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-16-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:52:02 +0000 (10:52 +0200)]
mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant
Instead of accessing ->strength/step_size directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-15-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:52:01 +0000 (10:52 +0200)]
mtd: nand: Create helpers to set/extract the ECC requirements
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC requirements access behind helpers so we can later
split those 2 concepts. As the structures have not been clarified yet,
these helpers access the same internal variable as
nanddev_get_ecc_conf() for now.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-14-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:52:00 +0000 (10:52 +0200)]
mtd: spinand: Use nanddev_get_ecc_conf() when relevant
Instead of accessing ->strength/step_size directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-13-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:59 +0000 (10:51 +0200)]
mtd: nand: Create a helper to extract the ECC configuration
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC configuration access behind a helper so we can later
split those 2 concepts.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-12-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:58 +0000 (10:51 +0200)]
mtd: rawnand: Use the new ECC engine type enumeration
Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.
The device tree parsing is also updated to return the new enumeration
from the old strings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:57 +0000 (10:51 +0200)]
mtd: rawnand: Separate the ECC engine type and the ECC byte placement
The use of "syndrome" placement should not be encoded in the ECC
engine mode/type.
Create a "placement" field in NAND chip and change all occurrences of
the NAND_ECC_HW_SYNDROME enumeration to be just NAND_ECC_HW and
possibly a placement entry like NAND_ECC_PLACEMENT_INTERLEAVED.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-10-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:56 +0000 (10:51 +0200)]
mtd: nand: Introduce the ECC engine framework
Create a generic ECC engine framework. This is a base to instantiate ECC
engine objects.
If we really want to be generic, bindings must evolve, so here is the
new logic. The following three properties are mutually exclusive:
- The nand-no-ecc-engine boolean property is set and there is no
ECC engine to retrieve.
- The nand-use-soft-ecc-engine boolean property is set and the core
will force using the use of software correction.
- There is a nand-ecc-engine property pointing at a node which will
act as ECC engine.
It the later case, the property may reference:
- The NAND chip node itself (for the on-die ECC case).
- The parent node if the NAND controller embeds an ECC engine.
- Any other node being an external ECC controller as well.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-9-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:55 +0000 (10:51 +0200)]
dt-bindings: mtd: Document boolean NAND ECC properties
Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
The former is here to force software correction, the latter prevents
any correction to happen.
These properties (along with nand-ecc-engine) are supposed to be more
accurate than the current nand-ecc-modes wich is very misleading and
very often people think it is mandatory while the core should be
relied upon to decide which correction to handle.
nand-ecc-mode was already inacurate, but it becomes totally
problematic with setups where there are several hardware engines.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-8-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:54 +0000 (10:51 +0200)]
dt-bindings: mtd: Document nand-ecc-engine
This property is needed to precisely point to the hardware ECC engine
to use when there are several of them available. Here, hardware also
refers to the on-die possibility.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-7-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:53 +0000 (10:51 +0200)]
dt-bindings: mtd: Document nand-ecc-placement
This optional property defines where the ECC bytes are expected to be
stored. No value defaults to an unknown location, while these
locations can be explicitly set to OOB or interleaved depending if
the ECC bytes are entirely stored in the OOB area or mixed with
regular data in the main area (also sometimes referred as
"syndrome").
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-6-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:52 +0000 (10:51 +0200)]
mtd: nand: Add a NAND page I/O request type
Use an enum to differentiate the type of I/O (reading or writing a
page). Also update the request iterator.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-5-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:51 +0000 (10:51 +0200)]
mtd: rawnand: Move the nand_ecc_algo enum to the generic NAND layer
This enumeration is generic and will be reused NAND-wide.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-4-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:50 +0000 (10:51 +0200)]
mtd: rawnand: Rename the ECC algorithm enumeration items
NAND_ECC_ is not a meaningful prefix, use NAND_ECC_ALGO_ instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-3-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 27 Aug 2020 08:51:49 +0000 (10:51 +0200)]
mtd: rawnand: Add a kernel doc to the ECC algorithm enumeration
Before moving it to the generic raw NAND core, ensure the enumeration
is properly described.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-2-miquel.raynal@bootlin.com
Linus Torvalds [Sun, 23 Aug 2020 21:08:43 +0000 (14:08 -0700)]
Linux 5.9-rc2
Linus Torvalds [Sun, 23 Aug 2020 18:37:23 +0000 (11:37 -0700)]
Merge tag 'powerpc-5.9-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add perf support for emitting extended registers for power10.
- A fix for CPU hotplug on pseries, where on large/loaded systems we
may not wait long enough for the CPU to be offlined, leading to
crashes.
- Addition of a raw cputable entry for Power10, which is not required
to boot, but is required to make our PMU setup work correctly in
guests.
- Three fixes for the recent changes on 32-bit Book3S to move modules
into their own segment for strict RWX.
- A fix for a recent change in our powernv PCI code that could lead to
crashes.
- A change to our perf interrupt accounting to avoid soft lockups when
using some events, found by syzkaller.
- A change in the way we handle power loss events from the hypervisor
on pseries. We no longer immediately shut down if we're told we're
running on a UPS.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.
* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
powerpc/pseries: Do not initiate shutdown when system is running on UPS
powerpc/perf: Fix soft lockups due to missed interrupt accounting
powerpc/powernv/pci: Fix possible crash when releasing DMA resources
powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
powerpc/fixmap: Fix the size of the early debug area
powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
powerpc/kernel: Cleanup machine check function declarations
powerpc: Add POWER10 raw mode cputable entry
powerpc/perf: Add extended regs support for power10 platform
powerpc/perf: Add support for outputting extended regs in perf intr_regs
powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
Linus Torvalds [Sun, 23 Aug 2020 18:21:16 +0000 (11:21 -0700)]
Merge tag 'x86-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for x86 which removes the RDPID usage from the paranoid
entry path and unconditionally uses LSL to retrieve the CPU number.
RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
and restores them either when leaving the run loop, on preemption or
when going out to user space. MSR_TSX_AUX is part of that lazy MSR
set, so after writing the guest value and before the lazy restore any
exception using the paranoid entry will read the guest value and use
it as CPU number to retrieve the GSBASE value for the current CPU when
FSGSBASE is enabled. As RDPID is only used in that particular entry
path, there is no reason to burden VMENTER/EXIT with two extra MSR
writes. Remove the RDPID optimization, which is not even backed by
numbers from the paranoid entry path instead"
* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
Linus Torvalds [Sun, 23 Aug 2020 18:15:14 +0000 (11:15 -0700)]
Merge tag 'perf-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single update for perf on x86 which has support for the broken down
bandwith counters"
* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
Linus Torvalds [Sun, 23 Aug 2020 18:08:32 +0000 (11:08 -0700)]
Merge tag 'efi-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
- Enforce NX on RO data in mixed EFI mode
- Destroy workqueue in an error handling path to prevent UAF
- Stop argument parser at '--' which is the delimiter for init
- Treat a NULL command line pointer as empty instead of dereferncing it
unconditionally.
- Handle an unterminated command line correctly
- Cleanup the 32bit code leftovers and remove obsolete documentation
* tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: efi: remove description of efi=old_map
efi/x86: Move 32-bit code into efi_32.c
efi/libstub: Handle unterminated cmdline
efi/libstub: Handle NULL cmdline
efi/libstub: Stop parsing arguments at "--"
efi: add missed destroy_workqueue when efisubsys_init fails
efi/x86: Mark kernel rodata non-executable for mixed mode
Linus Torvalds [Sun, 23 Aug 2020 18:05:47 +0000 (11:05 -0700)]
Merge tag 'core-urgent-2020-08-23' of git://git./linux/kernel/git/tip/tip
Pull entry fix from Thomas Gleixner:
"A single bug fix for the common entry code.
The transcription of the x86 version messed up the reload of the
syscall number from pt_regs after ptrace and seccomp which breaks
syscall number rewriting"
* tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Respect syscall number rewrites
Linus Torvalds [Sun, 23 Aug 2020 17:57:19 +0000 (10:57 -0700)]
Merge tag 'edac_urgent_for_v5.9_rc2' of git://git./linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A single fix correcting a reversed error severity determination check
which lead to a recoverable error getting marked as fatal, by Tony
Luck"
* tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
Linus Torvalds [Sun, 23 Aug 2020 17:52:33 +0000 (10:52 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
Linus Torvalds [Sun, 23 Aug 2020 00:11:38 +0000 (17:11 -0700)]
Merge branch 'work.epoll' of git://git./linux/kernel/git/viro/vfs
Pull epoll fixes from Al Viro:
"Fix reference counting and clean up exit paths"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_epoll_ctl(): clean the failure exits up a bit
epoll: Keep a reference on files added to the check list
Al Viro [Sat, 22 Aug 2020 22:25:52 +0000 (18:25 -0400)]
do_epoll_ctl(): clean the failure exits up a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Marc Zyngier [Wed, 19 Aug 2020 16:12:17 +0000 (17:12 +0100)]
epoll: Keep a reference on files added to the check list
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nikolay Aleksandrov [Sat, 22 Aug 2020 12:06:36 +0000 (15:06 +0300)]
net: nexthop: don't allow empty NHA_GROUP
Currently the nexthop code will use an empty NHA_GROUP attribute, but it
requires at least 1 entry in order to function properly. Otherwise we
end up derefencing null or random pointers all over the place due to not
having any nh_grp_entry members allocated, nexthop code relies on having at
least the first member present. Empty NHA_GROUP doesn't make any sense so
just disallow it.
Also add a WARN_ON for any future users of nexthop_create_group().
BUG: kernel NULL pointer dereference, address:
0000000000000080
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 558 Comm: ip Not tainted 5.9.0-rc1+ #93
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:fib_check_nexthop+0x4a/0xaa
Code: 0f 84 83 00 00 00 48 c7 02 80 03 f7 81 c3 40 80 fe fe 75 12 b8 ea ff ff ff 48 85 d2 74 6b 48 c7 02 40 03 f7 81 c3 48 8b 40 10 <48> 8b 80 80 00 00 00 eb 36 80 78 1a 00 74 12 b8 ea ff ff ff 48 85
RSP: 0018:
ffff88807983ba00 EFLAGS:
00010213
RAX:
0000000000000000 RBX:
ffff88807983bc00 RCX:
0000000000000000
RDX:
ffff88807983bc00 RSI:
0000000000000000 RDI:
ffff88807bdd0a80
RBP:
ffff88807983baf8 R08:
0000000000000dc0 R09:
000000000000040a
R10:
0000000000000000 R11:
ffff88807bdd0ae8 R12:
0000000000000000
R13:
0000000000000000 R14:
ffff88807bea3100 R15:
0000000000000001
FS:
00007f10db393700(0000) GS:
ffff88807dc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000080 CR3:
000000007bd0f004 CR4:
00000000003706f0
Call Trace:
fib_create_info+0x64d/0xaf7
fib_table_insert+0xf6/0x581
? __vma_adjust+0x3b6/0x4d4
inet_rtm_newroute+0x56/0x70
rtnetlink_rcv_msg+0x1e3/0x20d
? rtnl_calcit.isra.0+0xb8/0xb8
netlink_rcv_skb+0x5b/0xac
netlink_unicast+0xfa/0x17b
netlink_sendmsg+0x334/0x353
sock_sendmsg_nosec+0xf/0x3f
____sys_sendmsg+0x1a0/0x1fc
? copy_msghdr_from_user+0x4c/0x61
___sys_sendmsg+0x63/0x84
? handle_mm_fault+0xa39/0x11b5
? sockfd_lookup_light+0x72/0x9a
__sys_sendmsg+0x50/0x6e
do_syscall_64+0x54/0xbe
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f10dacc0bb7
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 8b 05 9a 4b 2b 00 85 c0 75 2e 48 63 ff 48 63 d2 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 b1 f2 2a 00 f7 d8 64 89 02 48
RSP: 002b:
00007ffcbe628bf8 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007ffcbe628f80 RCX:
00007f10dacc0bb7
RDX:
0000000000000000 RSI:
00007ffcbe628c60 RDI:
0000000000000003
RBP:
000000005f41099c R08:
0000000000000001 R09:
0000000000000008
R10:
00000000000005e9 R11:
0000000000000246 R12:
0000000000000000
R13:
0000000000000000 R14:
00007ffcbe628d70 R15:
0000563a86c6e440
Modules linked in:
CR2:
0000000000000080
CC: David Ahern <dsahern@gmail.com>
Fixes:
430a049190de ("nexthop: Add support for nexthop groups")
Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 22 Aug 2020 17:22:44 +0000 (10:22 -0700)]
Merge tag 'kbuild-fixes-v5.9' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- move -Wsign-compare warning from W=2 to W=3
- fix the keyword _restrict to __restrict in genksyms
- fix more bugs in qconf
* tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
kconfig: qconf: remove redundant help in the info view
kconfig: qconf: remove qInfo() to get back Qt4 support
kconfig: qconf: remove unused colNr
kconfig: qconf: fix the popup menu in the ConfigInfoView window
kconfig: qconf: fix signal connection to invalid slots
genksyms: keywords: Use __restrict not _restrict
kbuild: remove redundant patterns in filter/filter-out
extract-cert: add static to local data
Makefile.extrawarn: Move sign-compare from W=2 to W=3
Linus Torvalds [Sat, 22 Aug 2020 17:17:36 +0000 (10:17 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow booting of late secondary CPUs affected by erratum 1418040
(currently they are parked if none of the early CPUs are affected by
this erratum).
- Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
- Print a warning that untrusted guests without a CPU erratum
workaround (Cortex-A57 832075) may deadlock the affected system.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ARM64: vdso32: Install vdso32 from vdso_install
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
arm64: Allow booting of late CPUs affected by erratum 1418040
arm64: Move handling of erratum 1418040 into C code
Linus Torvalds [Sat, 22 Aug 2020 17:12:49 +0000 (10:12 -0700)]
Merge tag 's390-5.9-3' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- a couple of fixes for storage key handling relevant for debugging
- add cond_resched into potentially slow subchannels scanning loop
- fixes for PF/VF linking and to ignore stale PCI configuration request
events
* tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix PF/VF linking on hot plug
s390/pci: re-introduce zpci_remove_device()
s390/pci: fix zpci_bus_link_virtfn()
s390/ptrace: fix storage key handling
s390/runtime_instrumentation: fix storage key handling
s390/pci: ignore stale configuration request event
s390/cio: add cond_resched() in the slow_eval_known_fn() loop
Linus Torvalds [Sat, 22 Aug 2020 17:03:05 +0000 (10:03 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
Linus Torvalds [Sat, 22 Aug 2020 16:56:42 +0000 (09:56 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
of the changes are in qla2xxx and ufs and all are mostly small and
definitely don't impact the core"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
scsi: qla2xxx: Check if FW supports MQ before enabling
scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
scsi: qla2xxx: Reduce noisy debug message
scsi: qla2xxx: Fix login timeout
scsi: qla2xxx: Indicate correct supported speeds for Mezz card
scsi: qla2xxx: Flush I/O on zone disable
scsi: qla2xxx: Flush all sessions on zone disable
scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
scsi: scsi_debug: Fix scp is NULL errors
scsi: zfcp: Fix use-after-free in request timeout handlers
scsi: ufs: No need to send Abort Task if the task in DB was cleared
scsi: ufs: Clean up completed request without interrupt notification
scsi: ufs: Improve interrupt handling for shared interrupts
scsi: ufs: Fix interrupt error message for shared interrupts
scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
scsi: ufs-mediatek: Fix incorrect time to wait link status
...
Linus Torvalds [Sat, 22 Aug 2020 16:31:11 +0000 (09:31 -0700)]
Merge tag 'devicetree-fixes-for-5.9-2' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another set of DT fixes:
- restore range parsing error check
- workaround PCI range parsing with missing 'device_type' now
required
- correct description of 'phy-connection-type'
- fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema
- a couple of grammar and whitespace fixes
- update Shawn Guo's email"
* tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: vendor-prefixes: Remove trailing whitespace
dt-bindings: net: correct description of phy-connection-type
dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
of: address: Work around missing device_type property in pcie nodes
dt: writing-schema: Miscellaneous grammar fixes
dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings
of/address: check for invalid range.cpu_addr
Geert Uytterhoeven [Wed, 19 Aug 2020 09:20:58 +0000 (11:20 +0200)]
dt-bindings: vendor-prefixes: Remove trailing whitespace
Fixes:
f516fb704d02fff2 ("dt-bindings: Whitespace clean-ups in schema files")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819092058.1526-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Will Deacon [Tue, 11 Aug 2020 10:27:25 +0000 (11:27 +0100)]
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():
| BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394
| in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper
| INFO: lockdep is turned off.
| CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1
| Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
| Call trace:
| dump_backtrace+0x0/0x284
| show_stack+0x1c/0x28
| dump_stack+0xf0/0x1a4
| ___might_sleep+0x2bc/0x2cc
| unmap_stage2_range+0x160/0x1ac
| kvm_unmap_hva_range+0x1a0/0x1c8
| kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8
| __mmu_notifier_invalidate_range_start+0x218/0x31c
| mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0
| __oom_reap_task_mm+0x128/0x268
| oom_reap_task+0xac/0x298
| oom_reaper+0x178/0x17c
| kthread+0x1e4/0x1fc
| ret_from_fork+0x10/0x30
Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we
only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier
flags.
Cc: <stable@vger.kernel.org>
Fixes:
8b3405e345b5 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <
20200811102725.7121-3-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Will Deacon [Tue, 11 Aug 2020 10:27:24 +0000 (11:27 +0100)]
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <
20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Madalin Bucur [Thu, 20 Aug 2020 10:02:04 +0000 (13:02 +0300)]
dt-bindings: net: correct description of phy-connection-type
The phy-connection-type parameter is described in ePAPR 1.1:
Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/1597917724-11127-1-git-send-email-madalin.bucur@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Fri, 21 Aug 2020 21:59:16 +0000 (14:59 -0700)]
Merge tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Make sure the head link cancelation includes async work
- Get rid of kiocb_wait_page_queue_init(), makes no sense to have it as
a separate function since you moved it into io_uring itself
- io_import_iovec cleanups (Pavel, me)
- Use system_unbound_wq for ring exit work, to avoid spawning tons of
these if we have tons of rings exiting at the same time
- Fix req->flags overflow flag manipulation (Pavel)
* tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block:
io_uring: kill extra iovec=NULL in import_iovec()
io_uring: comment on kfree(iovec) checks
io_uring: fix racy req->flags modification
io_uring: use system_unbound_wq for ring exit work
io_uring: cleanup io_import_iovec() of pre-mapped request
io_uring: get rid of kiocb_wait_page_queue_init()
io_uring: find and cancel head link async work on files exit
Rob Herring [Wed, 19 Aug 2020 17:58:16 +0000 (11:58 -0600)]
dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
The intel,lgm-pcie binding is matching on all snps,dw-pcie instances
which is wrong. Add a custom 'select' entry to fix this.
Fixes:
e54ea45a4955 ("dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Fri, 21 Aug 2020 21:44:48 +0000 (14:44 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"11 patches.
Subsystems affected by this: misc, mm/hugetlb, mm/vmalloc, mm/misc,
romfs, relay, uprobes, squashfs, mm/cma, mm/pagealloc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, page_alloc: fix core hung in free_pcppages_bulk()
mm: include CMA pages in lowmem_reserve at boot
squashfs: avoid bio_alloc() failure with 1Mbyte blocks
uprobes: __replace_page() avoid BUG in munlock_vma_page()
kernel/relay.c: fix memleak on destroy relay channel
romfs: fix uninitialized memory leak in romfs_dev_read()
mm/rodata_test.c: fix missing function declaration
mm/vunmap: add cond_resched() in vunmap_pmd_range
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
hugetlb_cgroup: convert comma to semicolon
mailmap: add Andi Kleen
David S. Miller [Fri, 21 Aug 2020 19:54:50 +0000 (12:54 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2020-08-21
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 78 insertions(+), 24 deletions(-).
The main changes are:
1) three fixes in BPF task iterator logic, from Yonghong.
2) fix for compressed dwarf sections in vmlinux, from Jiri.
3) fix xdp attach regression, from Andrii.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 21 Aug 2020 19:32:42 +0000 (12:32 -0700)]
Merge tag 'riscv-for-linus-5.9-rc2' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- The CLINT driver has been split in two: one to handle the M-mode
CLINT (memory mapped and used on NOMMU systems) and one to handle the
S-mode CLINT (via SBI).
- The addition of SiFive's drivers to rv32_defconfig
* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SiFive drivers to rv32_defconfig
dt-bindings: timer: Add CLINT bindings
RISC-V: Remove CLINT related code from timer and arch
clocksource/drivers: Add CLINT timer driver
RISC-V: Add mechanism to provide custom IPI operations
Linus Torvalds [Fri, 21 Aug 2020 19:28:33 +0000 (12:28 -0700)]
Merge tag 'for-linus-5.9-rc2-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One build fix and a minor fix for suppressing a useless warning when
booting a Xen dom0 via UEFI"
* tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Fix build error when CONFIG_ACPI is not set/enabled:
efi: avoid error message when booting under Xen
Linus Torvalds [Fri, 21 Aug 2020 19:26:58 +0000 (12:26 -0700)]
Merge tag 'pm-5.9-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few issues in the operating performance points (OPP)
framework.
Specifics:
- Fix re-enabling of resources in dev_pm_opp_set_rate() (Rajendra
Nayak)
- Fix OPP table reference counting in error paths (Stephen Boyd)"
* tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Enable resources again if they were disabled earlier
opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails
opp: Put opp table in dev_pm_opp_set_rate() for empty tables
Tobias Klauser [Fri, 21 Aug 2020 13:36:42 +0000 (15:36 +0200)]
bpf: Fix two typos in uapi/linux/bpf.h
Also remove trailing whitespaces in bpf_skb_get_tunnel_key example code.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821133642.18870-1-tklauser@distanz.ch
Tom Rix [Fri, 21 Aug 2020 13:56:00 +0000 (06:56 -0700)]
net: dsa: b53: check for timeout
clang static analysis reports this problem
b53_common.c:1583:13: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will
also be garbage
ent.port &= ~BIT(port);
~~~~~~~~ ^
ent is set by a successful call to b53_arl_read(). Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.
So add -ETIMEDOUT to the switch statement. Because
b53_arl_op_wait() already prints out a message, do not add another
one.
Fixes:
1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Boyd [Tue, 18 Aug 2020 01:49:50 +0000 (18:49 -0700)]
ARM64: vdso32: Install vdso32 from vdso_install
Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
Fixes:
a7f71a2c8903 ("arm64: compat: Add vDSO")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20200818014950.42492-1-swboyd@chromium.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Fri, 21 Aug 2020 18:03:38 +0000 (11:03 -0700)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Improvements to ext4's block allocator performance for very large file
systems, especially when the file system or files which are highly
fragmented. There is a new mount option, prefetch_block_bitmaps which
will pull in the block bitmaps and set up the in-memory buddy bitmaps
when the file system is initially mounted.
Beyond that, a lot of bug fixes and cleanups. In particular, a number
of changes to make ext4 more robust in the face of write errors or
file system corruptions"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: limit the length of per-inode prealloc list
ext4: reorganize if statement of ext4_mb_release_context()
ext4: add mb_debug logging when there are lost chunks
ext4: Fix comment typo "the the".
jbd2: clean up checksum verification in do_one_pass()
ext4: change to use fallthrough macro
ext4: remove unused parameter of ext4_generic_delete_entry function
mballoc: replace seq_printf with seq_puts
ext4: optimize the implementation of ext4_mb_good_group()
ext4: delete invalid comments near ext4_mb_check_limits()
ext4: fix typos in ext4_mb_regular_allocator() comment
ext4: fix checking of directory entry validity for inline directories
fs: prevent BUG_ON in submit_bh_wbc()
ext4: correctly restore system zone info when remount fails
ext4: handle add_system_zone() failure in ext4_setup_system_zone()
ext4: fold ext4_data_block_valid_rcu() into the caller
ext4: check journal inode extents more carefully
ext4: don't allow overlapping system zones
ext4: handle error of ext4_setup_system_zone() on remount
ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp()
...
David Howells [Fri, 21 Aug 2020 09:15:12 +0000 (10:15 +0100)]
afs: Fix NULL deref in afs_dynroot_depopulate()
If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry. If the superblock has a dynamic root
(ie. what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.
Fix this by skipping that bit of code if there is no root dentry.
This leads to an oops looking like:
general protection fault, ...
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
...
RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385
...
Call Trace:
afs_kill_super+0x13b/0x180 fs/afs/super.c:535
deactivate_locked_super+0x94/0x160 fs/super.c:335
afs_get_tree+0x1124/0x1460 fs/afs/super.c:598
vfs_get_tree+0x89/0x2f0 fs/super.c:1547
do_new_mount fs/namespace.c:2875 [inline]
path_mount+0x1387/0x2070 fs/namespace.c:3192
do_mount fs/namespace.c:3205 [inline]
__do_sys_mount fs/namespace.c:3413 [inline]
__se_sys_mount fs/namespace.c:3390 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
which is oopsing on this line:
inode_lock(root->d_inode);
presumably because sb->s_root was NULL.
Fixes:
0da0b7fd73e4 ("afs: Display manually added cells in dynamic root mount")
Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 21 Aug 2020 17:14:16 +0000 (10:14 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"One regression from 5.8 and a few bugs from earlier kernels:
- Various spelling corrections in kernel prints
- Bug fixes in hfi1 and bntx_re
- Revert a 5.8 patch in hns
- Batch update for Mellanox and Cumulus maintainers emails"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain
Revert "RDMA/hns: Reserve one sge in order to avoid local length error"
RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request
RDMA/bnxt_re: Do not add user qps to flushlist
RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"
RDMA/usnic: Fix spelling mistake "transistion" -> "transition"
RDMA/hns: Fix spelling mistake "epmty" -> "empty"
Linus Torvalds [Fri, 21 Aug 2020 17:07:54 +0000 (10:07 -0700)]
Merge tag 'sound-5.9-rc2' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes over several drivers, but all are driver-
specific and nothing looks scary.
Slightly large changes are seen in ASoC qcom driver for the bugs that
were revealed by the recent ASoC core change to report the invalid
register access errors. Also ASoC fsl got a slight intensive change
for the distortion fix.
Others are only trivial fixes or device-specific quirks"
* tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda: avoid reset of sdo_limit
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion
ALSA: usb-audio: ignore broken processing/extension unit
ASoC: intel: Fix memleak in sst_media_open
ASoC: wm8994: Avoid attempts to read unreadable registers
ASoC: msm8916-wcd-analog: fix register Interrupt offset
ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
ALSA: hda/realtek: Add model alc298-samsung-headphone
ALSA: usb-audio: Update documentation comment for MS2109 quirk
ALSA: isa: fix spelling mistakes in the comments
ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)
ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book
ASoC: q6routing: add dummy register read/write function
ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM
ASoC: Make soc_component_read() returning an error code again
ASoC: amd: Replacing component->name with codec_dai->name.
ASoC: fsl: Fix unused variable warning
ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n
ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n
...
Linus Torvalds [Fri, 21 Aug 2020 17:02:44 +0000 (10:02 -0700)]
Merge tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes pull for rc2. Usual rc2 doesn't seem too busy, mainly
i915 and amdgpu. I'd expect the usual uptick for rc3.
amdgpu:
- Fix allocation size
- SR-IOV fixes
- Vega20 SMU feature state caching fix
- Fix custom pptable handling
- Arcturus golden settings update
- Several display fixes
- Fixes for Navy Flounder
- Misc display fixes
- RAS fix
amdkfd:
- SDMA fix for renoir
i915:
- Fix device parameter usage for selftest mock i915 device
- Fix LPSP capability debugfs NULL dereference
- Fix buddy register pagemask table
- Fix intel_atomic_check() non-negative return value
- Fix selftests passing a random 0 into ilog2()
- Fix TGL power well enable/disable ordering
- Switch to PMU module refcounting
- GVT fixes
virtio:
- Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl()
- Fix memory leak in virtio_gpu_cleanup_object()"
* tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm: (34 commits)
Revert "drm/amdgpu: disable gfxoff for navy_flounder"
drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells
drm/i915/selftests: Avoid passing a random 0 into ilog2
drm/i915: Fix wrong return value in intel_atomic_check()
drm/i915: Update bw_buddy pagemask table
drm/i915/display: Check for an LPSP encoder before dereferencing
drm/i915: Copy default modparams to mock i915_device
drm/i915: Provide the perf pmu.module
drm/amd/display: fix pow() crashing when given base 0
drm/amd/display: Reset scrambling on Test Pattern
drm/amd/display: fix dcn3 wide timing dsc validation
drm/amd/display: Fix DFPstate hang due to view port changed
drm/amd/display: Assign correct left shift
drm/amd/display: Call DMUB for eDP power control
drm/amdkfd: fix the wrong sdma instance query for renoir
drm/amdgpu: parse ta firmware for navy_flounder
drm/amdgpu: fix NULL pointer access issue when unloading driver
drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event()
drm/amdgpu: disable gfxoff for navy_flounder
drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal
...
Charan Teja Reddy [Fri, 21 Aug 2020 00:42:27 +0000 (17:42 -0700)]
mm, page_alloc: fix core hung in free_pcppages_bulk()
The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.
P1 P2
Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.
Allocate the pages from the
movable zone.
Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
This process is entered into
the exit path thus it tries
to release the order-0 pages
to pcp lists through
free_unref_page_commit().
As pcp->high = 0, pcp->count = 1
proceed to call the function
free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
Read the pcp's batch value using
READ_ONCE() and pass the same to
free_pcppages_bulk(), pcp values
passed here are, batch = 63,
count = 1.
Since num of pages in the pcp
lists are less than ->batch,
then it will stuck in
while(list_empty(list)) loop
with interrupts disabled thus
a core hung.
Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.
The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.
With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.
This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).
[1]: https://patchwork.kernel.org/patch/
11696389/
Fixes:
5f8dcc21211a ("page-allocator: split per-cpu list into one-list-per-migrate-type")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org> [2.6+]
Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Doug Berger [Fri, 21 Aug 2020 00:42:24 +0000 (17:42 -0700)]
mm: include CMA pages in lowmem_reserve at boot
The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones. Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.
The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.
The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.
The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall. This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order. With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.
This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.
In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout
cma: Reserved 256 MiB at 0x0000000030000000
Zone ranges:
DMA [mem 0x0000000000000000-0x000000002fffffff]
Normal empty
HighMem [mem 0x0000000030000000-0x000000003fffffff]
would result in 0 lowmem_reserve for the DMA zone. This would allow
userspace to deplete the DMA zone easily.
Funnily enough
$ cat /proc/sys/vm/lowmem_reserve_ratio
would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.
This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.
Fixes:
bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Phillip Lougher [Fri, 21 Aug 2020 00:42:21 +0000 (17:42 -0700)]
squashfs: avoid bio_alloc() failure with 1Mbyte blocks
This is a regression introduced by the patch "migrate from ll_rw_block
usage to BIO".
Bio_alloc() is limited to 256 pages (1 Mbyte). This can cause a failure
when reading 1 Mbyte block filesystems. The problem is a datablock can be
fully (or almost uncompressed), requiring 256 pages, but, because blocks
are not aligned to page boundaries, it may require 257 pages to read.
Bio_kmalloc() can handle 1024 pages, and so use this for the edge
condition.
Fixes:
93e72b3c612a ("squashfs: migrate from ll_rw_block usage to BIO")
Reported-by: Nicolas Prochazka <nicolas.prochazka@gmail.com>
Reported-by: Tomoatsu Shimada <shimada@walbrix.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: Philippe Liard <pliard@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: Daniel Rosenberg <drosen@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200815035637.15319-1-phillip@squashfs.org.uk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 21 Aug 2020 00:42:17 +0000 (17:42 -0700)]
uprobes: __replace_page() avoid BUG in munlock_vma_page()
syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when
called from uprobes __replace_page(). Which of many ways to fix it?
Settled on not calling when PageCompound (since Head and Tail are equals
in this context, PageCompound the usual check in uprobes.c, and the prior
use of FOLL_SPLIT_PMD will have cleared PageMlocked already).
Fixes:
5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [5.4+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Yongjun [Fri, 21 Aug 2020 00:42:14 +0000 (17:42 -0700)]
kernel/relay.c: fix memleak on destroy relay channel
kmemleak report memory leak as follows:
unreferenced object 0x607ee4e5f948 (size 8):
comm "syz-executor.1", pid 2098, jiffies
4295031601 (age 288.468s)
hex dump (first 8 bytes):
00 00 00 00 00 00 00 00 ........
backtrace:
relay_open kernel/relay.c:583 [inline]
relay_open+0xb6/0x970 kernel/relay.c:563
do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557
__blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597
blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738
blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613
block_ioctl+0xe5/0x120 fs/block_dev.c:1871
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
'chan->buf' is malloced in relay_open() by alloc_percpu() but not free
while destroy the relay channel. Fix it by adding free_percpu() before
return from relay_destroy_channel().
Fixes:
017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David Rientjes <rientjes@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Akash Goel <akash.goel@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann Horn [Fri, 21 Aug 2020 00:42:11 +0000 (17:42 -0700)]
romfs: fix uninitialized memory leak in romfs_dev_read()
romfs has a superblock field that limits the size of the filesystem; data
beyond that limit is never accessed.
romfs_dev_read() fetches a caller-supplied number of bytes from the
backing device. It returns 0 on success or an error code on failure;
therefore, its API can't represent short reads, it's all-or-nothing.
However, when romfs_dev_read() detects that the requested operation would
cross the filesystem size limit, it currently silently truncates the
requested number of bytes. This e.g. means that when the content of a
file with size 0x1000 starts one byte before the filesystem size limit,
->readpage() will only fill a single byte of the supplied page while
leaving the rest uninitialized, leaking that uninitialized memory to
userspace.
Fix it by returning an error code instead of truncating the read when the
requested read operation would go beyond the end of the filesystem.
Fixes:
da4458bda237 ("NOMMU: Make it possible for RomFS to use MTD devices directly")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Leon Romanovsky [Fri, 21 Aug 2020 00:42:08 +0000 (17:42 -0700)]
mm/rodata_test.c: fix missing function declaration
The compilation with CONFIG_DEBUG_RODATA_TEST set produces the following
warning due to the missing include.
mm/rodata_test.c:15:6: warning: no previous prototype for 'rodata_test' [-Wmissing-prototypes]
15 | void rodata_test(void)
| ^~~~~~~~~~~
Fixes:
2959a5f726f6 ("mm: add arch-independent testcases for RODATA")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200819080026.918134-1-leon@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aneesh Kumar K.V [Fri, 21 Aug 2020 00:42:05 +0000 (17:42 -0700)]
mm/vunmap: add cond_resched() in vunmap_pmd_range
Like zap_pte_range add cond_resched so that we can avoid softlockups as
reported below. On non-preemptible kernel with large I/O map region (like
the one we get when using persistent memory with sector mode), an unmap of
the namespace can report below softlockups.
22724.027334] watchdog: BUG: soft lockup - CPU#49 stuck for 23s! [ndctl:50777]
NIP [
c0000000000dc224] plpar_hcall+0x38/0x58
LR [
c0000000000d8898] pSeries_lpar_hpte_invalidate+0x68/0xb0
Call Trace:
flush_hash_page+0x114/0x200
hpte_need_flush+0x2dc/0x540
vunmap_page_range+0x538/0x6f0
free_unmap_vmap_area+0x30/0x70
remove_vm_area+0xfc/0x140
__vunmap+0x68/0x270
__iounmap.part.0+0x34/0x60
memunmap+0x54/0x70
release_nodes+0x28c/0x300
device_release_driver_internal+0x16c/0x280
unbind_store+0x124/0x170
drv_attr_store+0x44/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
__vfs_write+0x3c/0x70
vfs_write+0xd8/0x260
ksys_write+0xdc/0x130
system_call+0x5c/0x70
Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200807075933.310240-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 21 Aug 2020 00:42:02 +0000 (17:42 -0700)]
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in
__khugepaged_enter(): yes, when one thread is about to dump core, has set
core_state, and is waiting for others, another might do something calling
__khugepaged_enter(), which now crashes because I lumped the core_state
test (known as "mmget_still_valid") into khugepaged_test_exit(). I still
think it's best to lump them together, so just in this exceptional case,
check mm->mm_users directly instead of khugepaged_test_exit().
Fixes:
bbe98f9cadff ("khugepaged: khugepaged_test_exit() check mmget_still_valid()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org> [4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xu Wang [Fri, 21 Aug 2020 00:41:59 +0000 (17:41 -0700)]
hugetlb_cgroup: convert comma to semicolon
Replace a comma between expression statements by a semicolon.
Fixes:
faced7e0806cf4 ("mm: hugetlb controller for cgroups v2")
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Link: http://lkml.kernel.org/r/20200818064333.21759-1-vulab@iscas.ac.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Desaulniers [Fri, 21 Aug 2020 00:41:56 +0000 (17:41 -0700)]
mailmap: add Andi Kleen
I keep getting bounce back from the suse.de address.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Quentin Perret <qperret@qperret.net>
Link: http://lkml.kernel.org/r/20200818203214.659955-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Wed, 19 Aug 2020 19:44:39 +0000 (21:44 +0200)]
core/entry: Respect syscall number rewrites
The transcript of the x86 entry code to the generic version failed to
reload the syscall number from ptregs after ptrace and seccomp have run,
which both can modify the syscall number in ptregs. It returns the original
syscall number instead which is obviously not the right thing to do.
Reload the syscall number to fix that.
Fixes:
142781e108b1 ("entry: Provide generic syscall entry functionality")
Reported-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Tested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/87blj6ifo8.fsf@nanos.tec.linutronix.de
Sean Christopherson [Fri, 21 Aug 2020 10:52:29 +0000 (06:52 -0400)]
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
KVM has an optmization to avoid expensive MRS read/writes on
VMENTER/EXIT. It caches the MSR values and restores them either when
leaving the run loop, on preemption or when going out to user space.
The affected MSRs are not required for kernel context operations. This
changed with the recently introduced mechanism to handle FSGSBASE in the
paranoid entry code which has to retrieve the kernel GSBASE value by
accessing per CPU memory. The mechanism needs to retrieve the CPU number
and uses either LSL or RDPID if the processor supports it.
Unfortunately RDPID uses MSR_TSC_AUX which is in the list of cached and
lazily restored MSRs, which means between the point where the guest value
is written and the point of restore, MSR_TSC_AUX contains a random number.
If an NMI or any other exception which uses the paranoid entry path happens
in such a context, then RDPID returns the random guest MSR_TSC_AUX value.
As a consequence this reads from the wrong memory location to retrieve the
kernel GSBASE value. Kernel GS is used to for all regular this_cpu_*()
operations. If the GSBASE in the exception handler points to the per CPU
memory of a different CPU then this has the obvious consequences of data
corruption and crashes.
As the paranoid entry path is the only place which accesses MSR_TSX_AUX
(via RDPID) and the fallback via LSL is not significantly slower, remove
the RDPID alternative from the entry path and always use LSL.
The alternative would be to write MSR_TSC_AUX on every VMENTER and VMEXIT
which would be inflicting massive overhead on that code path.
[ tglx: Rewrote changelog ]
Fixes:
eaad981291ee3 ("x86/entry/64: Introduce the FIND_PERCPU_BASE macro")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Debugged-by: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200821105229.18938-1-pbonzini@redhat.com
Leon Romanovsky [Mon, 10 Aug 2020 09:10:59 +0000 (12:10 +0300)]
MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain
Mellanox and Cumulus Network were acquired by Nvidia, so change the
maintainers emails to new domain name.
Link: https://lore.kernel.org/r/20200810091100.243932-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Kajol Jain [Fri, 21 Aug 2020 08:06:10 +0000 (13:36 +0530)]
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
Commit
792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7
device to show cpumask") added cpumask file as part of hv-24x7 driver
inside the interface folder. The cpumask file is supposed to be in the
top folder of the PMU driver in order to make hotplug work.
This patch fixes that issue and creates new group 'cpumask_attr_group'
to add cpumask file and make sure it added in top folder.
command:# cat /sys/devices/hv_24x7/cpumask
0
Fixes:
792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821080610.123997-1-kjain@linux.ibm.com
Christophe Leroy [Fri, 21 Aug 2020 07:15:25 +0000 (07:15 +0000)]
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
In is_module_segment(), when VMALLOC_END is over 0xf0000000,
ALIGN(VMALLOC_END, SZ_256M) has value 0.
In that case, addr >= ALIGN(VMALLOC_END, SZ_256M) is always
true then is_module_segment() always returns false.
Use (ALIGN(VMALLOC_END, SZ_256M) - 1) which will have
value 0xffffffff and will be suitable for the comparison.
Fixes:
c49643319715 ("powerpc/32s: Only leave NX unset on segments used for modules")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/09fc73fe9c7423c6b4cf93f93df9bb0ed8eefab5.1597994047.git.christophe.leroy@csgroup.eu
Rob Herring [Mon, 3 Aug 2020 19:31:25 +0000 (13:31 -0600)]
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
If guests don't have certain CPU erratum workarounds implemented, then
there is a possibility a guest can deadlock the system. IOW, only trusted
guests should be used on systems with the erratum.
This is the case for Cortex-A57 erratum 832075.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: kvmarm@lists.cs.columbia.edu
Link: https://lore.kernel.org/r/20200803193127.3012242-2-robh@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Fri, 31 Jul 2020 17:38:24 +0000 (18:38 +0100)]
arm64: Allow booting of late CPUs affected by erratum 1418040
As we can now switch from a system that isn't affected by 1418040
to a system that globally is affected, let's allow affected CPUs
to come in at a later time.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200731173824.107480-3-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Marc Zyngier [Fri, 31 Jul 2020 17:38:23 +0000 (18:38 +0100)]
arm64: Move handling of erratum 1418040 into C code
Instead of dealing with erratum 1418040 on each entry and exit,
let's move the handling to __switch_to() instead, which has
several advantages:
- It can be applied when it matters (switching between 32 and 64
bit tasks).
- It is written in C (yay!)
- It can rely on static keys rather than alternatives
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200731173824.107480-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
projects / platform / kernel / linux-rpi.git / log