arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage

[ Upstream commit 5f16a046f8e144c294ef98cd29d9458b5f8273e5 ]

FUTEX_OP_OPARG_SHIFT instructs the futex code to treat the 12-bit oparg
field as a shift value, potentially leading to a left shift value that
is negative or with an absolute value that is significantly larger then
the size of the type. UBSAN chokes with:

================================================================================
UBSAN: Undefined behaviour in ./arch/arm64/include/asm/futex.h:60:13
shift exponent -1 is negative
CPU: 1 PID: 1449 Comm: syz-executor0 Not tainted 4.11.0-rc4-00005-g977eb52-dirty #11
Hardware name: linux,dummy-virt (DT)
Call trace:
[<ffff200008094778>] dump_backtrace+0x0/0x538 arch/arm64/kernel/traps.c:73
[<ffff200008094cd0>] show_stack+0x20/0x30 arch/arm64/kernel/traps.c:228
[<ffff200008c194a8>] __dump_stack lib/dump_stack.c:16 [inline]
[<ffff200008c194a8>] dump_stack+0x120/0x188 lib/dump_stack.c:52
[<ffff200008cc24b8>] ubsan_epilogue+0x18/0x98 lib/ubsan.c:164
[<ffff200008cc3098>] __ubsan_handle_shift_out_of_bounds+0x250/0x294 lib/ubsan.c:421
[<ffff20000832002c>] futex_atomic_op_inuser arch/arm64/include/asm/futex.h:60 [inline]
[<ffff20000832002c>] futex_wake_op kernel/futex.c:1489 [inline]
[<ffff20000832002c>] do_futex+0x137c/0x1740 kernel/futex.c:3231
[<ffff200008320504>] SYSC_futex kernel/futex.c:3281 [inline]
[<ffff200008320504>] SyS_futex+0x114/0x268 kernel/futex.c:3249
[<ffff200008084770>] el0_svc_naked+0x24/0x28
================================================================================
syz-executor1 uses obsolete (PF_INET,SOCK_PACKET)
sock: process `syz-executor0' is using obsolete setsockopt SO_BSDCOMPAT

This patch attempts to fix some of this by:

  * Making encoded_op an unsigned type, so we can shift it left even if
    the top bit is set.

  * Casting to signed prior to shifting right when extracting oparg
    and cmparg

  * Consider only the bottom 5 bits of oparg when using it as a left-shift
    value.

Whilst I think this catches all of the issues, I'd much prefer to remove
this stuff, as I think it's unused and the bugs are copy-pasted between
a bunch of architectures.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: imx-sdma: Handle return value of clk_prepare_enable

[ Upstream commit fb9caf370f4d0457789d13a1a1b110a8db846e5e ]

clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE]

[ Upstream commit 6e2f03e292ef46eed2b31b0a344a91d514f9cd81 ]

Prevent a kernel panic caused by unintentionally clearing TCR watchdog
bits. At this point in the kernel boot, the watchdog may have already
been enabled by u-boot. The original code's attempt to write to the TCR
register results in an inadvertent clearing of the watchdog
configuration bits, causing the 476 to reset.

Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: filter trusted xattr for non-admin

[ Upstream commit a082c6f680da298cf075886ff032f32ccb7c5e1a ]

Filesystems filter out extended attributes in the "trusted." domain for
unprivlieged callers.

Overlay calls underlying filesystem's method with elevated privs, so need
to do the filtering in overlayfs too.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hdlcdrv: Fix divide by zero in hdlcdrv_ioctl

[ Upstream commit fb3ce90b7d7761b6f7f28f0ff5c456ef6b5229a1 ]

syszkaller fuzzer triggered a divide by zero, when set calibration
through ioctl().

To fix it, test 'bitrate' if it is negative or 0, just return -EINVAL.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wl1251: check return from call to wl1251_acx_arp_ip_filter

[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ]

Currently the less than zero error check on ret is incorrect
as it is checking a far earlier ret assignment rather than the
return from the call to wl1251_acx_arp_ip_filter. Fix this by
adding in the missing assginment.

Detected by CoverityScan, CID#1164835 ("Logically dead code")

Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'

[ Upstream commit eaadb1caa966a91128297b754e90b7c92b350a00 ]

In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.

Fix it and return the error code if such an error paths is taken.

Fixes: 3d9ff34622ba ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: label descriptors using the device name

[ Upstream commit 24e78079bf2250874e33da2e7cfbb6db72d3caf4 ]

Some GPIO lines appear named "?" in the lsgpio dump due to their
requesting drivers not passing a reasonable label.

Most typically this happens if a device tree node just defines
gpios = <...> and not foo-gpios = <...>, the former gets named
"foo" and the latter gets named "?".

However the struct device passed in is always valid so let's
just label the GPIO with dev_name() on the device if no proper
label was passed.

Cc: Reported-by: Jason Kridner <jkridner@beagleboard.org>
Reported-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfb: fix video mode and line_length being set when loaded

[ Upstream commit 7b9faf5df0ac495a1a3d7cdb64921c179f9008ac ]

Currently, when loading the vfb module, the newly created fbdev
has a line_length of 0, and its video mode would be PSEUDOCOLOR
regardless of color depth. (The former could be worked around by
calling the FBIOPUT_VSCREENINFO ioctl with having the FBACTIVIATE_FORCE
flag set.) This patch automatically sets the line_length correctly,
and the video mode is derived from the bit depth now as well.

Thanks to Geert Uytterhoeven for confirming the bug and helping me with
the patch.

Output of `fbset -i' before the patch:
mode "1366x768-60"
    # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
    geometry 1366 768 1366 768 32
    timings 13806 120 10 14 3 32 5
    rgba 8/0,8/8,8/16,8/24
endmode

Frame buffer device information:
    Name        : Virtual FB
    Address     : 0xffffaa1405d85000
    Size        : 4196352
    Type        : PACKED PIXELS
    Visual      : PSEUDOCOLOR
    XPanStep    : 1
    YPanStep    : 1
    YWrapStep   : 1
    LineLength  : 0                    <-- note this
    Accelerator : No

After:
mode "1366x768-60"
    # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
    geometry 1366 768 1366 768 32
    timings 13806 120 10 14 3 32 5
    rgba 8/0,8/8,8/16,8/24
endmode

Frame buffer device information:
    Name        : Virtual FB
    Address     : 0xffffaa1405d85000
    Size        : 4196352
    Type        : PACKED PIXELS
    Visual      : TRUECOLOR
    XPanStep    : 1
    YPanStep    : 1
    YWrapStep   : 1
    LineLength  : 5464
    Accelerator : No

Signed-off-by: "Pieter \"PoroCYon\" Sluys" <pcy@national.shitposting.agency>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
[b.zolnierkie: minor fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag.

[ Upstream commit f49d4aed1315a7b766d855f1367142e682b0cc87 ]

1. In IO path, setting of "ATA command pending" flag early before device
   removal, invalid device handle etc., checks causes any new commands
   to be always returned with SAM_STAT_BUSY and when the driver removes
   the drive the SML issues SYNC Cache command and that command is
   always returned with SAM_STAT_BUSY and thus making SYNC Cache command
   to requeued.

2. If the driver gets an ATA PT command for a SATA drive then the driver
   set "ATA command pending" flag in device specific data structure not
   to allow any further commands until the ATA PT command is completed.
   However, after setting the flag if the driver decides to return the
   command back to upper layers without actually issuing to the firmware
   (i.e., returns from qcmd failure return paths) then the corresponding
   flag is not cleared and this prevents the driver from sending any new
   commands to the drive.

This patch fixes above two issues by setting of "ATA command pending"
flag after checking for whether device deleted, invalid device handle,
device busy with task management. And by setting "ATA command pending"
flag to false in all of the qcmd failure return paths after setting the
flag.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libiscsi: Allow sd_shutdown on bad transport

[ Upstream commit d754941225a7dbc61f6dd2173fa9498049f9a7ee ]

If, for any reason, userland shuts down iscsi transport interfaces
before proper logouts - like when logging in to LUNs manually, without
logging out on server shutdown, or when automated scripts can't
umount/logout from logged LUNs - kernel will hang forever on its
sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all
still existent paths.

PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow"
 #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee
 #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5
 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199
 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604
 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c
 #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10
 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7
 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe
 #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7
 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c

This happens because iscsi_eh_cmd_timed_out(), the transport layer
timeout helper, would tell the queue timeout function (scsi_times_out)
to reset the request timer over and over, until the session state is
back to logged in state. Unfortunately, during server shutdown, this
might never happen again.

Other option would be "not to handle" the issue in the transport
layer. That would trigger the error handler logic, which would also need
the session state to be logged in again.

Best option, for such case, is to tell upper layers that the command was
handled during the transport layer error handler helper, marking it as
DID_NO_CONNECT, which will allow completion and inform about the
problem.

After the session was marked as ISCSI_STATE_FAILED, due to the first
timeout during the server shutdown phase, all subsequent cmds will fail
to be queued, allowing upper logic to fail faster.

Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: cht_bsw_rt5645: Analog Mic support

[ Upstream commit b70b309950418437bbd2a30afd169c4f09dee3e5 ]

Various Cherry Trail boards with a rt5645 codec have an analog mic
connected to IN2P + IN2N. The mic on this boards also needs micbias to
be enabled, on some boards micbias1 is used and on others micbias2, so
we enable both.

This commit adds a new "Int Analog Mic" DAPM widget for this, so that we
do not end up enabling micbias on boards with a digital mic which uses
the already present "Int Mic" widget. Some existing UCM files already
refer to "Int Mic" for their "Internal Analog Microphones" SectionDevice,
but these don't work anyways since they enable the RECMIX BST1 Switch
instead of the BST2 switch.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: videobuf2-core: don't go out of the buffer range

[ Upstream commit df93dc61b0d8b19a5c9db545cf3fcc24f88dfde4 ]

Currently, there's no check if an invalid buffer range
is passed. However, while testing DVB memory mapped apps,
I got this:

   videobuf2_core: VB: num_buffers -2143943680, buffer 33, index -2143943647
   unable to handle kernel paging request at ffff888b773c0890
   IP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core]
   PGD 4142c7067 P4D 4142c7067 PUD 0
   Oops: 0002 [#1] SMP
   Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc rc_dvbsky sp2 ts2020 intel_rapl x86_pkg_temp_thermal dvb_usb_dvbsky intel_powerclamp dvb_usb_v2 coretemp m88ds3103 kvm_intel i2c_mux dvb_core snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul videobuf2_vmalloc videobuf2_memops snd_hda_intel ghash_clmulni_intel videobuf2_core snd_hda_codec rc_core mei_me intel_cstate snd_hwdep snd_hda_core videodev intel_uncore snd_pcm mei media tpm_tis tpm_tis_core intel_rapl_perf tpm snd_timer lpc_ich snd soundcore kvm irqbypass libcrc32c i915 i2c_algo_bit drm_kms_helper
   e1000e ptp drm crc32c_intel video pps_core
   CPU: 3 PID: 1776 Comm: dvbv5-zap Not tainted 4.14.0+ #78
   Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
   task: ffff88877c73bc80 task.stack: ffffb7c402418000
   RIP: 0010:__vb2_queue_alloc+0x134/0x4e0 [videobuf2_core]
   RSP: 0018:ffffb7c40241bc60 EFLAGS: 00010246
   RAX: 0000000080360421 RBX: 0000000000000021 RCX: 000000000000000a
   RDX: ffffb7c40241bcf4 RSI: ffff888780362c60 RDI: ffff888796d8e130
   RBP: ffffb7c40241bcc8 R08: 0000000000000316 R09: 0000000000000004
   R10: ffff888780362c00 R11: 0000000000000001 R12: 000000000002f000
   R13: ffff8887758be700 R14: 0000000000021000 R15: 0000000000000001
   FS:  00007f2849024740(0000) GS:ffff888796d80000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   CR2: ffff888b773c0890 CR3: 000000043beb2005 CR4: 00000000003606e0
   Call Trace:
    vb2_core_reqbufs+0x226/0x420 [videobuf2_core]
    dvb_vb2_reqbufs+0x2d/0xc0 [dvb_core]
    dvb_dvr_do_ioctl+0x98/0x1d0 [dvb_core]
    dvb_usercopy+0x53/0x1b0 [dvb_core]
    ? dvb_demux_ioctl+0x20/0x20 [dvb_core]
    ? tty_ldisc_deref+0x16/0x20
    ? tty_write+0x1f9/0x310
    ? process_echoes+0x70/0x70
    dvb_dvr_ioctl+0x15/0x20 [dvb_core]
    do_vfs_ioctl+0xa5/0x600
    SyS_ioctl+0x79/0x90
    entry_SYSCALL_64_fastpath+0x1a/0xa5
   RIP: 0033:0x7f28486f7ea7
   RSP: 002b:00007ffc13b2db18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
   RAX: ffffffffffffffda RBX: 000055b10fc06130 RCX: 00007f28486f7ea7
   RDX: 00007ffc13b2db48 RSI: 00000000c0086f3c RDI: 0000000000000007
   RBP: 0000000000000203 R08: 000055b10df1e02c R09: 000000000000002e
   R10: 0036b42415108357 R11: 0000000000000246 R12: 0000000000000000
   R13: 00007f2849062f60 R14: 00000000000001f1 R15: 00007ffc13b2da54
   Code: 74 0a 60 8b 0a 48 83 c0 30 48 83 c2 04 89 48 d0 89 48 d4 48 39 f0 75 eb 41 8b 42 08 83 7d d4 01 41 c7 82 ec 01 00 00 ff ff ff ff <4d> 89 94 c5 88 00 00 00 74 14 83 c3 01 41 39 dc 0f 85 f1 fe ff
   RIP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] RSP: ffffb7c40241bc60
   CR2: ffff888b773c0890

So, add a sanity check in order to prevent going past array.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (ina2xx) Make calibration register value fixed

[ Upstream commit 5d389b125186cf254ad5b8015763ac07c151aea4 ]

Calibration register is used for calculating current register in
hardware according to datasheet:
current = shunt_volt * calib_register / 2048 (ina 226)
current = shunt_volt * calib_register / 4096 (ina 219)

Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in
order to avoid truncation error and provide best precision allowed
by shunt_voltage measurement. Make current scale value follow changes
of shunt_resistor from sysfs as calib_register value is now fixed.

Power_lsb value should also follow shunt_resistor changes as stated in
datasheet:
power_lsb = 25 * current_lsb (ina 226)
power_lsb = 20 * current_lsb (ina 219)

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rds; Reset rs->rs_bound_addr in rds_add_bound() failure path

[ Upstream commit 7ae0c649c47f1c5d2db8cee6dd75855970af1669 ]

If the rds_sock is not added to the bind_hash_table, we must
reset rs_bound_addr so that rds_remove_bound will not trip on
this rds_sock.

rds_add_bound() does a rds_sock_put() in this failure path, so
failing to reset rs_bound_addr will result in a socket refcount
bug, and will trigger a WARN_ON with the stack shown below when
the application subsequently tries to close the PF_RDS socket.

     WARNING: CPU: 20 PID: 19499 at net/rds/af_rds.c:496 \
rds_sock_destruct+0x15/0x30 [rds]
       :
     __sk_destruct+0x21/0x190
     rds_remove_bound.part.13+0xb6/0x140 [rds]
     rds_release+0x71/0x120 [rds]
     sock_release+0x1a/0x70
     sock_close+0xe/0x20
     __fput+0xd5/0x210
     task_work_run+0x82/0xa0
     do_exit+0x2ce/0xb30
     ? syscall_trace_enter+0x1cc/0x2b0
     do_group_exit+0x39/0xa0
     SyS_exit_group+0x10/0x10
     do_syscall_64+0x61/0x1a0

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: fix missing print session offset info

[ Upstream commit 820da5357572715c6235ba3b3daa2d5b43a1198f ]

Report offset parameter in L2TP_CMD_SESSION_GET command if
it has been configured by userspace

Fixes: 309795f4bec ("l2tp: Add netlink control API for L2TP")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Add warning message if there is unexpected event name

[ Upstream commit 9f5c6d8777a2d962b0eeacb2a16f37da6bea545b ]

This improve the error message so that user can know event-name error
before writing new events to kprobe-events interface.

E.g.
   ======
   #./perf probe -x /lib64/libc-2.25.so malloc_get_state*
   Internal error: "malloc_get_state@GLIBC_2" is an invalid event name.
     Error: Failed to add events.
   ======

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151275040665.24652.5188568529237584489.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: power_allocator: fix one race condition issue for thermal_instances list

[ Upstream commit a5de11d67dcd268b8d0beb73dc374de5e97f0caf ]

When invoking allow_maximum_power and traverse tz->thermal_instances,
we should grab thermal_zone_device->lock to avoid race condition. For
example, during the system reboot, if the mali GPU device implements
device shutdown callback and unregister GPU devfreq cooling device,
the deleted list head may be accessed to cause panic, as the following
log shows:

[   33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address dead000000000070
[   33.566708] c3 25 (kworker/3:0) pgd = ffffffc0ed290000
[   33.572071] c3 25 (kworker/3:0) [dead000000000070] *pgd=00000001ed292003, *pud=00000001ed292003, *pmd=0000000000000000
[   33.581515] c3 25 (kworker/3:0) Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912
[   33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check
[   33.620245] c3 25 (kworker/3:0) task: ffffffc0f32e4200 ti: ffffffc0f32f0000 task.ti: ffffffc0f32f0000
[   33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4
[   33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4
[   33.643742] c3 25 (kworker/3:0) pc : [<ffffff8008683dd0>] lr : [<ffffff8008683e10>] pstate: 20000145
[   33.652874] c3 25 (kworker/3:0) sp : ffffffc0f32f3bb0
[   34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020)
[   34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000)
[   34.819822] c3 25 (kworker/3:0) Call trace:
[   34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0)
[   34.924993] c3 25 (kworker/3:0) [<ffffff8008683dd0>] power_allocator_throttle+0x7c8/0x8a4
[   34.933184] c3 25 (kworker/3:0) [<ffffff80086807f4>] handle_thermal_trip.part.25+0x70/0x224
[   34.941545] c3 25 (kworker/3:0) [<ffffff8008680a68>] thermal_zone_device_update+0xc0/0x20c
[   34.949818] c3 25 (kworker/3:0) [<ffffff8008680bd4>] thermal_zone_device_check+0x20/0x2c
[   34.957924] c3 25 (kworker/3:0) [<ffffff80080b93a4>] process_one_work+0x168/0x458
[   34.965414] c3 25 (kworker/3:0) [<ffffff80080ba068>] worker_thread+0x13c/0x4b4
[   34.972650] c3 25 (kworker/3:0) [<ffffff80080c0a4c>] kthread+0xe8/0xfc
[   34.979187] c3 25 (kworker/3:0) [<ffffff8008084e90>] ret_from_fork+0x10/0x40
[   34.986244] c3 25 (kworker/3:0) Code: f9405e73 eb1302bf d102e273 54ffc460 (b9402a61)
[   34.994339] c3 25 (kworker/3:0) ---[ end trace 32057901e3b7e1db ]---

Signed-off-by: Yi Zeng <yizeng@asrmicro.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node

[ Upstream commit d5c7b4d5ac2237a6da7ced3adfe6b8bf769f8cc6 ]

Commit a22950c888e3 (mmc: sdhci-of-esdhc: add quirk
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to
enable the broken timeout val quirk for ls1021a, but did not add the
corresponding compatible string to the device tree, so it didn't really
have any effect. Fix that.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: llc: add lock_sock in llc_ui_bind to avoid a race condition

[ Upstream commit 0908cf4dfef35fc6ac12329007052ebe93ff1081 ]

There is a race condition in llc_ui_bind if two or more processes/threads
try to bind a same socket.

If more processes/threads bind a same socket success that will lead to
two problems, one is this action is not what we expected, another is
will lead to kernel in unstable status or oops(in my simple test case,
cause llc2.ko can't unload).

The current code is test SOCK_ZAPPED bit to avoid a process to
bind a same socket twice but that is can't avoid more processes/threads
try to bind a same socket at the same time.

So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect.

Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Fix handling of lmsw instruction

[ Upstream commit e1d39b17e044e8ae819827810d87d809ba5f58c0 ]

The decision whether or not to exit from L2 to L1 on an lmsw instruction is
based on bogus values: instead of using the information encoded within the
exit qualification, it uses the data also used for the mov-to-cr
instruction, which boils down to using whatever is in %eax at that point.

Use the correct values instead.

Without this fix, an L1 may not get notified when a 32-bit Linux L2
switches its secondary CPUs to protected mode; the L1 is only notified on
the next modification of CR0. This short time window poses a problem, when
there is some other reason to exit to L1 in between. Then, L2 will be
resumed in real mode and chaos ensues.

Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: Don't update slave->link until ready to commit

[ Upstream commit 797a93647a48d6cb8a20641a86a71713a947f786 ]

In the loadbalance arp monitoring scheme, when a slave link change is
detected, the slave->link is immediately updated and slave_state_changed
is set. Later down the function, the rtnl_lock is acquired and the
changes are committed, updating the bond link state.

However, the acquisition of the rtnl_lock can fail. The next time the
monitor runs, since slave->link is already updated, it determines that
link is unchanged. This results in the bond link state permanently out
of sync with the slave link.

This patch modifies bond_loadbalance_arp_mon() to handle link changes
identical to bond_ab_arp_{inspect/commit}(). The new link state is
maintained in slave->new_link until we're ready to commit at which point
it's copied into slave->link.

NOTE: miimon_{inspect/commit}() has a more complex state machine
requiring the use of the bond_{propose,commit}_link_state() functions
which maintains the intermediate state in slave->link_new_state. The arp
monitors don't require that.

Testing: This bug is very easy to reproduce with the following steps.
1. In a loop, toggle a slave link of a bond slave interface.
2. In a separate loop, do ifconfig up/down of an unrelated interface to
create contention for rtnl_lock.
Within a few iterations, the bond link goes out of sync with the slave
link.

Signed-off-by: Nithin Nayak Sujir <nsujir@tintri.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - clear INT before resetting controller

[ Upstream commit 4b3c7dbbfff0673e8a89575414b864d8b001d3bb ]

Some old touchpad FWs need to have interrupt cleared before issuing reset
command after updating firmware. We clear interrupt by attempting to read
full report from the controller, and discarding any data read.

Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: move somaxconn init from sysctl code

[ Upstream commit 7c3f1875c66fbc19762760097cabc91849ea0bbb ]

The default value for somaxconn is set in sysctl_core_net_init(), but this
function is not called when kernel is configured without CONFIG_SYSCTL.

This results in the kernel not being able to accept TCP connections,
because the backlog has zero size. Usually, the user ends up with:
"TCP: request_sock_TCP: Possible SYN flooding on port 7. Dropping request.  Check SNMP counters."
If SYN cookies are not enabled the connection is rejected.

Before ef547f2ac16 (tcp: remove max_qlen_log), the effects were less
severe, because the backlog was always at least eight slots long.

Signed-off-by: Roman Kapl <roman.kapl@sysgo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: better validation of received ack sequences

[ Upstream commit d0e1a1b5a833b625c93d3d49847609350ebd79db ]

Paul Fiterau Brostean reported :

<quote>
Linux TCP stack we analyze exhibits behavior that seems odd to me.
The scenario is as follows (all packets have empty payloads, no window
scaling, rcv/snd window size should not be a factor):

       TEST HARNESS (CLIENT)                        LINUX SERVER

   1.  -                                          LISTEN (server listen,
then accepts)

   2.  - --> <SEQ=100><CTL=SYN>               --> SYN-RECEIVED

   3.  - <-- <SEQ=300><ACK=101><CTL=SYN,ACK>  <-- SYN-RECEIVED

   4.  - --> <SEQ=101><ACK=301><CTL=ACK>      --> ESTABLISHED

   5.  - <-- <SEQ=301><ACK=101><CTL=FIN,ACK>  <-- FIN WAIT-1 (server
opts to close the data connection calling "close" on the connection
socket)

   6.  - --> <SEQ=101><ACK=99999><CTL=FIN,ACK> --> CLOSING (client sends
FIN,ACK with not yet sent acknowledgement number)

   7.  - <-- <SEQ=302><ACK=102><CTL=ACK>      <-- CLOSING (ACK is 102
instead of 101, why?)

... (silence from CLIENT)

   8.  - <-- <SEQ=301><ACK=102><CTL=FIN,ACK>  <-- CLOSING
(retransmission, again ACK is 102)

Now, note that packet 6 while having the expected sequence number,
acknowledges something that wasn't sent by the server. So I would
expect
the packet to maybe prompt an ACK response from the server, and then be
ignored. Yet it is not ignored and actually leads to an increase of the
acknowledgement number in the server's retransmission of the FIN,ACK
packet. The explanation I found is that the FIN  in packet 6 was
processed, despite the acknowledgement number being unacceptable.
Further experiments indeed show that the server processes this FIN,
transitioning to CLOSING, then on receiving an ACK for the FIN it had
send in packet 5, the server (or better said connection) transitions
from CLOSING to TIME_WAIT (as signaled by netstat).

</quote>

Indeed, tcp_rcv_state_process() calls tcp_ack() but
does not exploit the @acceptable status but for TCP_SYN_RECV
state.

What we want here is to send a challenge ACK, if not in TCP_SYN_RECV
state. TCP_FIN_WAIT1 state is not the only state we should fix.

Add a FLAG_NO_CHALLENGE_ACK so that tcp_rcv_state_process()
can choose to send a challenge ACK and discard the packet instead
of wrongly change socket state.

With help from Neal Cardwell.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Paul Fiterau Brostean <p.fiterau-brostean@science.ru.nl>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()

[ Upstream commit 624327f8794704c5066b11a52f9da6a09dce7f9a ]

ext4_find_unwritten_pgoff() is used to search for offset of hole or
data in page range [index, end] (both inclusive), and the max number
of pages to search should be at least one, if end == index.
Otherwise the only page is missed and no hole or data is found,
which is not correct.

When block size is smaller than page size, this can be demonstrated
by preallocating a file with size smaller than page size and writing
data to the last block. E.g. run this xfs_io command on a 1k block
size ext4 on x86_64 host.

  # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \
       -c "seek -d 0" /mnt/ext4/testfile
  wrote 1024/1024 bytes at offset 2048
  1 KiB, 1 ops; 0.0000 sec (42.459 MiB/sec and 43478.2609 ops/sec)
  Whence  Result
  DATA    EOF

Data at offset 2k was missed, and lseek(2) returned ENXIO.

This is unconvered by generic/285 subtest 07 and 08 on ppc64 host,
where pagesize is 64k. Because a recent change to generic/285
reduced the preallocated file size to smaller than 64k.

Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix race in drivers/char/random.c:get_reg()

[ Upstream commit 9dfa7bba35ac08a63565d58c454dccb7e1bb0a08 ]

get_reg() can be reentered on architectures with prioritized interrupts
(m68k in this case), causing f->reg_index to be incremented after the
range check. Out of bounds memory access past the pt_regs struct results.
This will go mostly undetected unless access is beyond end of memory.

Prevent the race by disabling interrupts in get_reg().

Tested on m68k (Atari Falcon, and ARAnyM emulator).

Kudos to Geert Uytterhoeven for helping to trace this race.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()

[ Upstream commit c2dd893a3b0772d1c680e109b9d5715d7f73022b ]

If multiple tasks attempt to read the stats, it may happen that the
start_req_done completion is re-initialized while still being used by
another task, causing a list corruption.

This patch fixes the bug by adding a mutex to serialize the calls to
bnx2fc_get_host_stats().

WARNING: at lib/list_debug.c:48 list_del+0x6e/0xa0() (Not tainted)
Hardware name: PowerEdge R820
list_del corruption. prev->next should be ffff882035627d90, but was ffff884069541588

Pid: 40267, comm: perl Not tainted 2.6.32-642.3.1.el6.x86_64 #1
Call Trace:
 [<ffffffff8107c691>] ? warn_slowpath_common+0x91/0xe0
 [<ffffffff8107c796>] ? warn_slowpath_fmt+0x46/0x60
 [<ffffffff812ad16e>] ? list_del+0x6e/0xa0
 [<ffffffff81547eed>] ? wait_for_common+0x14d/0x180
 [<ffffffff8106c4a0>] ? default_wake_function+0x0/0x20
 [<ffffffff81547fd3>] ? wait_for_completion_timeout+0x13/0x20
 [<ffffffffa05410b1>] ? bnx2fc_get_host_stats+0xa1/0x280 [bnx2fc]
 [<ffffffffa04cf630>] ? fc_stat_show+0x90/0xc0 [scsi_transport_fc]
 [<ffffffffa04cf8b6>] ? show_fcstat_tx_frames+0x16/0x20 [scsi_transport_fc]
 [<ffffffff8137c647>] ? dev_attr_show+0x27/0x50
 [<ffffffff8113b9be>] ? __get_free_pages+0xe/0x50
 [<ffffffff812170e1>] ? sysfs_read_file+0x111/0x200
 [<ffffffff8119a305>] ? vfs_read+0xb5/0x1a0
 [<ffffffff8119b0b6>] ? fget_light_pos+0x16/0x50
 [<ffffffff8119a651>] ? sys_read+0x51/0xb0
 [<ffffffff810ee1fe>] ? __audit_syscall_exit+0x25e/0x290
 [<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: SSI PIO adjust to 24bit mode

[ Upstream commit 7819a942de7b993771bd9377babc80485fe7606b ]

commit 90431eb49bff ("ASoC: rsnd: don't use PDTA bit for 24bit on SSI")
fixups 24bit mode data alignment, but PIO was not cared.
This patch fixes PIO mode 24bit data alignment

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()

[ Upstream commit 662f9a105b4322b8559d448f86110e6ec24b8738 ]

If xdr_inline_decode() fails then we end up returning ERR_PTR(0).  The
caller treats NULL returns as -ENOMEM so it doesn't really hurt runtime,
but obviously we intended to set an error code here.

Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize

[ Upstream commit fefa92679dbe0c613e62b6c27235dcfbe9640ad1 ]

If nf_conntrack_htable_size was adjusted by the user during the ct
dump operation, we may invoke nf_ct_put twice for the same ct, i.e.
the "last" ct. This will cause the ct will be freed but still linked
in hash buckets.

It's very easy to reproduce the problem by the following commands:
  # while : ; do
  echo $RANDOM > /proc/sys/net/netfilter/nf_conntrack_buckets
  done
  # while : ; do
  conntrack -L
  done
  # iperf -s 127.0.0.1 &
  # iperf -c 127.0.0.1 -P 60 -t 36000

After a while, the system will hang like this:
  NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [bash:20184]
  NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [iperf:20382]
  ...

So at last if we find cb->args[1] is equal to "last", this means hash
resize happened, then we can set cb->args[1] to 0 to fix the above
issue.

Fixes: d205dc40798d ("[NETFILTER]: ctnetlink: fix deadlock in table dumping")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: NULL deref on crush_decode() error path

[ Upstream commit 293dffaad8d500e1a5336eeb90d544cf40d4fbd8 ]

If there is not enough space then ceph_decode_32_safe() does a goto bad.
We need to return an error code in that situation.  The current code
returns ERR_PTR(0) which is NULL.  The callers are not expecting that
and it results in a NULL dereference.

Fixes: f24e9980eb86 ("ceph: OSD client")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ieee802154: fix net_device reference release too early

[ Upstream commit a611c58b3d42a92e6b23423e166dd17c0c7fffce ]

This patch fixes the kernel oops when release net_device reference in
advance. In function raw_sendmsg(i think the dgram_sendmsg has the same
problem), there is a race condition between dev_put and dev_queue_xmit
when the device is gong that maybe lead to dev_queue_ximt to see
an illegal net_device pointer.

My test kernel is 3.13.0-32 and because i am not have a real 802154
device, so i change lowpan_newlink function to this:

        /* find and hold real wpan device */
        real_dev = dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK]));
        if (!real_dev)
                return -ENODEV;
//      if (real_dev->type != ARPHRD_IEEE802154) {
//              dev_put(real_dev);
//              return -EINVAL;
//      }
        lowpan_dev_info(dev)->real_dev = real_dev;
        lowpan_dev_info(dev)->fragment_tag = 0;
        mutex_init(&lowpan_dev_info(dev)->dev_list_mtx);

Also, in order to simulate preempt, i change the raw_sendmsg function
to this:

        skb->dev = dev;
        skb->sk  = sk;
        skb->protocol = htons(ETH_P_IEEE802154);
        dev_put(dev);
        //simulate preempt
        schedule_timeout_uninterruptible(30 * HZ);
        err = dev_queue_xmit(skb);
        if (err > 0)
                err = net_xmit_errno(err);

and this is my userspace test code named test_send_data:

int main(int argc, char **argv)
{
        char buf[127];
        int sockfd;
        sockfd = socket(AF_IEEE802154, SOCK_RAW, 0);
        if (sockfd < 0) {
                printf("create sockfd error: %s\n", strerror(errno));
                return -1;
        }
        send(sockfd, buf, sizeof(buf), 0);
        return 0;
}

This is my test case:

root@zhanglin-x-computer:~/develop/802154# uname -a
Linux zhanglin-x-computer 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15
03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
root@zhanglin-x-computer:~/develop/802154# ip link add link eth0 name
lowpan0 type lowpan
root@zhanglin-x-computer:~/develop/802154#
//keep the lowpan0 device down
root@zhanglin-x-computer:~/develop/802154# ./test_send_data &
//wait a while
root@zhanglin-x-computer:~/develop/802154# ip link del link dev lowpan0
//the device is gone
//oops
[381.303307] general protection fault: 0000 [#1]SMP
[381.303407] Modules linked in: af_802154 6lowpan bnep rfcomm
bluetooth nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek
rts5139(C) snd_hda_intel
snd_had_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi
snd_seq_midi_event snd_rawmidi snd_req intel_rapl snd_seq_device
coretemp i915 kvm_intel
kvm snd_timer snd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel
cypted drm_kms_helper drm i2c_algo_bit soundcore video mac_hid
parport_pc ppdev ip parport hid_generic
usbhid hid ahci r8169 mii libahdi
[381.304286] CPU:1 PID: 2524 Commm: 1 Tainted: G C 0 3.13.0-32-generic
[381.304409] Hardware name: Haier Haier DT Computer/Haier DT Codputer,
BIOS FIBT19H02_X64 06/09/2014
[381.304546] tasks: ffff000096965fc0 ti: ffffB0013779c000 task.ti:
ffffB8013779c000
[381.304659] RIP: 0010:[<ffffffff01621fe1>] [<ffffffff81621fe1>]
__dev_queue_ximt+0x61/0x500
[381.304798] RSP: 0018:ffffB8013779dca0 EFLAGS: 00010202
[381.304880] RAX: 272b031d57565351 RBX: 0000000000000000 RCX: ffff8800968f1a00
[381.304987] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800968f1a00
[381.305095] RBP: ffff8e013773dce0 R08: 0000000000000266 R09: 0000000000000004
[381.305202] R10: 0000000000000004 R11: 0000000000000005 R12: ffff88013902e000
[381.305310] R13: 000000000000007f R14: 000000000000007f R15: ffff8800968f1a00
[381.305418] FS:  00007fc57f50f740(0000) GS: ffff88013fc80000(0000)
knlGS: 0000000000000000
[381.305540] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[381.305627] CR2: 00007fad0841c000 CR3: 00000001368dd000 CR4: 00000000001007e0
[361.905734] Stack:
[381.305768]  00000000002052d0 000000003facb30a ffff88013779dcc0
ffff880137764000
[381.305898]  ffff88013779de70 000000000000007f 000000000000007f
ffff88013902e000
[381.306026]  ffff88013779dcf0 ffffffff81622490 ffff88013779dd39
ffffffffa03af9f1
[381.306155] Call Trace:
[381.306202]  [<ffffffff81622490>] dev_queue_xmit+0x10/0x20
[381.306294]  [<ffffffffa03af9f1>] raw_sendmsg+0x1b1/0x270 [af_802154]
[381.306396]  [<ffffffffa03af054>] ieee802154_sock_sendmsg+0x14/0x20 [af_802154]
[381.306512]  [<ffffffff816079eb>] sock_sendmsg+0x8b/0xc0
[381.306600]  [<ffffffff811d52a5>] ? __d_alloc+0x25/0x180
[381.306687]  [<ffffffff811a1f56>] ? kmem_cache_alloc_trace+0x1c6/0x1f0
[381.306791]  [<ffffffff81607b91>] SYSC_sendto+0x121/0x1c0
[381.306878]  [<ffffffff8109ddf4>] ? vtime_account_user+x54/0x60
[381.306975]  [<ffffffff81020d45>] ? syscall_trace_enter+0x145/0x250
[381.307073]  [<ffffffff816086ae>] SyS_sendto+0xe/0x10
[381.307156]  [<ffffffff8172c87f>] tracesys+0xe1/0xe6
[381.307233] Code: c6 a1 a4 ff 41 8b 57 78 49 8b 47 20 85 d2 48 8b 80
78 07 00 00 75 21 49 8b 57 18 48 85 d2 74 18 48 85 c0 74 13 8b 92 ac
01 00 00 <3b> 50 10 73 08 8b 44 90 14 41 89 47 78 41 f6 84 24 d5 00 00
00
[381.307801] RIP [<ffffffff81621fe1>] _dev_queue_xmit+0x61/0x500
[381.307901]  RSP <ffff88013779dca0>
[381.347512] Kernel panic - not syncing: Fatal exception in interrupt
[381.347747] drm_kms_helper: panic occurred, switching back to text console

In my opinion, there is always exist a chance that the device is gong
before call dev_queue_xmit.

I think the latest kernel is have the same problem and that
dev_put should be behind of the dev_queue_xmit.

Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx5: fix bug reading rss_hash_type from CQE

[ Upstream commit 12e8b570e732eaa5eae3a2895ba3fbcf91bde2b4 ]

Masks for extracting part of the Completion Queue Entry (CQE)
field rss_hash_type was swapped, namely CQE_RSS_HTYPE_IP and
CQE_RSS_HTYPE_L4.

The bug resulted in setting skb->l4_hash, even-though the
rss_hash_type indicated that hash was NOT computed over the
L4 (UDP or TCP) part of the packet.

Added comments from the datasheet, to make it more clear what
these masks are selecting.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix an error code in add_partition()

[ Upstream commit 7bd897cfce1eb373892d35d7f73201b0f9b221c4 ]

We don't set an error code on this path.  It means that we return NULL
instead of an error pointer and the caller does a NULL dereference.

Fixes: 6d1d8050b4bc ("block, partition: add partition_meta_info to hd_struct")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: do not check open permission on sockets

[ Upstream commit ccb544781d34afdb73a9a73ae53035d824d193bf ]

open permission is currently only defined for files in the kernel
(COMMON_FILE_PERMS rather than COMMON_FILE_SOCK_PERMS). Construction of
an artificial test case that tries to open a socket via /proc/pid/fd will
generate a recvfrom avc denial because recvfrom and open happen to map to
the same permission bit in socket vs file classes.

open of a socket via /proc/pid/fd is not supported by the kernel regardless
and will ultimately return ENXIO. But we hit the permission check first and
can thus produce these odd/misleading denials.  Omit the open check when
operating on a socket.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Tolerate irq_set_affinity_hint() failures

[ Upstream commit b665d98edc9ab295169be2fc5bb4e89a46de0a1a ]

Add tolerance to failures of irq_set_affinity_hint().
Its role is to give hints that optimizes performance,
and should not block the driver load.

In non-SMP systems, functionality is not available as
there is a single core, and all these calls definitely
fail.  Hence, do not call the function and avoid the
warning prints.

Fixes: db058a186f98 ("net/mlx5_core: Set irq affinity hints")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/numa: Use down_read_trylock() for the mmap_sem

[ Upstream commit 8655d5497735b288f8a9b458bd22e7d1bf95bb61 ]

A customer has reported a soft-lockup when running an intensive
memory stress test, where the trace on multiple CPU's looks like this:

 RIP: 0010:[<ffffffff810c53fe>]
  [<ffffffff810c53fe>] native_queued_spin_lock_slowpath+0x10e/0x190
...
 Call Trace:
  [<ffffffff81182d07>] queued_spin_lock_slowpath+0x7/0xa
  [<ffffffff811bc331>] change_protection_range+0x3b1/0x930
  [<ffffffff811d4be8>] change_prot_numa+0x18/0x30
  [<ffffffff810adefe>] task_numa_work+0x1fe/0x310
  [<ffffffff81098322>] task_work_run+0x72/0x90

Further investigation showed that the lock contention here is pmd_lock().

The task_numa_work() function makes sure that only one thread is let to perform
the work in a single scan period (via cmpxchg), but if there's a thread with
mmap_sem locked for writing for several periods, multiple threads in
task_numa_work() can build up a convoy waiting for mmap_sem for read and then
all get unblocked at once.

This patch changes the down_read() to the trylock version, which prevents the
build up. For a workload experiencing mmap_sem contention, it's probably better
to postpone the NUMA balancing work anyway. This seems to have fixed the soft
lockups involving pmd_lock(), which is in line with the convoy theory.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170515131316.21909-1-vbabka@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

leds: pca955x: Correct I2C Functionality

[ Upstream commit aace34c0bb8ea3c8bdcec865b6a4be4db0a68e33 ]

The driver checks an incorrect flag of functionality of adapter.
When a driver requires i2c_smbus_read_byte_data and
i2c_smbus_write_byte_data, it should check I2C_FUNC_SMBUS_BYTE_DATA
instead I2C_FUNC_I2C.
This patch fixes the problem.

Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ray_cs: Avoid reading past end of buffer

[ Upstream commit e48d661eb13f2f83861428f001c567fdb3f317e8 ]

Using memcpy() from a buffer that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. In this case, the source was made longer, since it did not
match the destination structure size. Additionally removes a needless cast.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: davinci: da8xx: Create DSP device only when assigned memory

[ Upstream commit f97f03578b997a8ec2b9bc4928f958a865137268 ]

The DSP device on Davinci platforms does not have an MMU and requires
specific DDR memory to boot. This memory is reserved using the rproc_mem
kernel boot parameter and is assigned to the device on non-DT boots.
The remoteproc core uses the DMA API and so will fall back to assigning
random memory if this memory is not assigned to the device, but the DSP
remote processor boot will not be successful in such cases. So, check
that memory has been reserved and assigned to the device specifically
before even creating the DSP device.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md-cluster: fix potential lock issue in add_new_disk

[ Upstream commit 2dffdc0724004f38f5e39907747b53e4b0d80e59 ]

The add_new_disk returns with communication locked if
__sendmsg returns failure, fix it with call unlock_comm
before return.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
CC: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors

[ Upstream commit 9651e6b2e20648d04d5e1fe6479a3056047e8781 ]

I've got another report about breaking ext4 by ENOMEM error returned from
ext4_mb_load_buddy() caused by memory shortage in memory cgroup.
This time inside ext4_discard_preallocations().

This patch replaces ext4_error() with ext4_warning() where errors returned
from ext4_mb_load_buddy() are not fatal and handled by caller:
* ext4_mb_discard_group_preallocations() - called before generating ENOSPC,
  we'll try to discard other group or return ENOSPC into user-space.
* ext4_trim_all_free() - just stop trimming and return ENOMEM from ioctl.

Some callers cannot handle errors, thus __GFP_NOFAIL is used for them:
* ext4_discard_preallocations()
* ext4_mb_discard_lg_preallocations()

Fixes: adb7ef600cc9 ("ext4: use __GFP_NOFAIL in ext4_free_blocks()")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: hi8435: cleanup reset gpio

[ Upstream commit 61305664a542f874283f74bf0b27ddb31f5045d7 ]

Reset GPIO is active low.

Currently driver uses gpiod_set_value(1) to clean reset, which depends
on device tree to contain GPIO_ACTIVE_HIGH - that does not match reality.

This fixes driver to use _raw version of gpiod_set_value() to enforce
active-low semantics despite of what's written in device tree. Allowing
device tree to override that only opens possibility for errors and does
not add any value.

Additionally, use _cansleep version to make things work with i2c-gpio
and other sleeping gpio drivers.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: hi8435: avoid garbage event at first enable

[ Upstream commit ee19ac340c5fdfd89c6348be4563453c61ab54a9 ]

Currently, driver generates events for channels if new reading differs
from previous one. This "previous value" is initialized to zero, which
results into event if value is constant-one.

Fix that by initializing "previous value" by reading at event enable
time.

This provides reliable sequence for userspace:
- enable event,
- AFTER THAT read current value,
- AFTER THAT each event will correspond to change.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: fix state migration copy replay sequence numbers

[ Upstream commit a486cd23661c9387fb076c3f6ae8b2aa9d20d54a ]

During xfrm migration copy replay and preplay sequence numbers
from the previous state.

Here is a tcpdump output showing the problem.
10.0.10.46 is running vanilla kernel, is the IKE/IPsec responder.
After the migration it sent wrong sequence number, reset to 1.
The migration is from 10.0.0.52 to 10.0.0.53.

IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7cf), length 136
IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7cf), length 136
IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d0), length 136
IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7d0), length 136

IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa  inf2[I]
IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa  inf2[R]
IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa  inf2[I]
IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa  inf2[R]

IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d1), length 136

NOTE: next sequence is wrong 0x1

IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x1), length 136
IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d2), length 136
IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x2), length 136

Signed-off-by: Antony Antony <antony@phenome.org>
Reviewed-by: Richard Guy Briggs <rgb@tricolour.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/powerpc: Fix TM resched DSCR test with some compilers

[ Upstream commit fe06fe860250a4f01d0eaf70a2563b1997174a74 ]

The tm-resched-dscr test has started failing sometimes, depending on
what compiler it's built with, eg:

  test: tm_resched_dscr
  Check DSCR TM context switch: tm-resched-dscr: tm-resched-dscr.c:76: test_body: Assertion `rv' failed.
  !! child died by signal 6

When it fails we see that the compiler doesn't initialise rv to 1 before
entering the inline asm block. Although that's counter intuitive, it
is allowed because we tell the compiler that the inline asm will write
to rv (using "=r"), meaning the original value is irrelevant.

Marking it as a read/write parameter would presumably work, but it seems
simpler to fix it by setting the initial value of rv in the inline asm.

Fixes: 96d016108640 ("powerpc: Correct DSCR during TM context switch")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath5k: fix memory leak on buf on failed eeprom read

[ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ]

The AR5K_EEPROM_READ macro returns with -EIO if a read error
occurs causing a memory leak on the allocated buffer buf. Fix
this by explicitly calling ath5k_hw_nvram_read and exiting on
the via the freebuf label that performs the necessary free'ing
of buf when a read error occurs.

Detected by CoverityScan, CID#1248782 ("Resource Leak")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash

[ Upstream commit e41e53cd4fe331d0d1f06f8e4ed7e2cc63ee2c34 ]

virt_addr_valid() is supposed to tell you if it's OK to call virt_to_page() on
an address. What this means in practice is that it should only return true for
addresses in the linear mapping which are backed by a valid PFN.

We are failing to properly check that the address is in the linear mapping,
because virt_to_pfn() will return a valid looking PFN for more or less any
address. That bug is actually caused by __pa(), used in virt_to_pfn().

eg: __pa(0xc000000000010000) = 0x10000  # Good
    __pa(0xd000000000010000) = 0x10000  # Bad!
    __pa(0x0000000000010000) = 0x10000  # Bad!

This started happening after commit bdbc29c19b26 ("powerpc: Work around gcc
miscompilation of __pa() on 64-bit") (Aug 2013), where we changed the definition
of __pa() to work around a GCC bug. Prior to that we subtracted PAGE_OFFSET from
the value passed to __pa(), meaning __pa() of a 0xd or 0x0 address would give
you something bogus back.

Until we can verify if that GCC bug is no longer an issue, or come up with
another solution, this commit does the minimal fix to make virt_addr_valid()
work, by explicitly checking that the address is in the linear mapping region.

Fixes: bdbc29c19b26 ("powerpc: Work around gcc miscompilation of __pa() on 64-bit")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Tested-by: Breno Leitao <breno.leitao@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: csiostor: fix use after free in csio_hw_use_fwconfig()

[ Upstream commit a351e40b6de550049423a26f7ded7b639e363d89 ]

mbp pointer is passed to csio_hw_validate_caps() so call mempool_free()
after calling csio_hw_validate_caps().

Signed-off-by: Varun Prakash <varun@chelsio.com>
Fixes: 541c571fa2fd ("csiostor:Use firmware version from cxgb4/t4fw_version.h")
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh_eth: Use platform device for printing before register_netdev()

[ Upstream commit 5f5c5449acad0cd3322e53e1ac68c044483b0aa5 ]

The MDIO initialization failure message is printed using the network
device, before it has been registered, leading to:

     (null): failed to initialise MDIO

Use the platform device instead to fix this:

    sh-eth ee700000.ethernet: failed to initialise MDIO

Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sh-sci: Fix race condition causing garbage during shutdown

[ Upstream commit 1cf4a7efdc71cab84c42cfea7200608711ea954f ]

If DMA is enabled and used, a burst of old data may be seen on the
serial console during "poweroff" or "reboot".  uart_flush_buffer()
clears the circular buffer, but sci_port.tx_dma_len is not reset.
This leads to a circular buffer overflow, dumping (UART_XMIT_SIZE -
sci_port.tx_dma_len) bytes.

To fix this, add a .flush_buffer() callback that resets
sci_port.tx_dma_len.

Inspired by commit 31ca2c63fdc0aee7 ("tty/serial: atmel: fix race
condition (TX+DMA)").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: omap: Disable DMA for console UART

[ Upstream commit 84b40e3b57eef1417479c00490dd4c9f6e5ffdbc ]

Kernel always writes log messages to console via
serial8250_console_write()->serial8250_console_putchar() which directly
accesses UART_TX register _without_ using DMA.

But, if other processes like systemd using same UART port, then these
writes are handled by a different code flow using 8250_omap driver where
there is provision to use DMA.

It seems that it is possible that both DMA and CPU might simultaneously
put data to UART FIFO and lead to potential loss of data due to FIFO
overflow and weird data corruption. This happens when both kernel
console and userspace tries to write simultaneously to the same UART
port. Therefore, disable DMA on kernel console port to avoid potential
race between CPU and DMA.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ene_usb6250: fix SCSI residue overwriting

[ Upstream commit aa18c4b6e0e39bfb00af48734ec24bc189ac9909 ]

In the ene_usb6250 sub-driver for usb-storage, the SCSI residue is not
reported correctly.  The residue is initialized to 0, but this value
is overwritten whenever the driver sends firmware to the card reader
before performing the current command.  As a result, a valid READ or
WRITE operation appears to have failed, causing the SCSI core to retry
the command multiple times and eventually fail.

This patch fixes the problem by resetting the SCSI residue to 0 after
sending firmware to the device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: x25: fix one potential use-after-free issue

[ Upstream commit 64df6d525fcff1630098db9238bfd2b3e092d5c1 ]

The function x25_init is not properly unregister related resources
on error handler.It is will result in kernel oops if x25_init init
failed, so add properly unregister call on error handler.

Also, i adjust the coding style and make x25_register_sysctl properly
return failure.

Signed-off-by: linzhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ene_usb6250: fix first command execution

[ Upstream commit 4b309f1c4972c8f09e03ac64fc63510dbf5591a4 ]

In the ene_usb6250 sub-driver for usb-storage, the ene_transport()
routine is supposed to initialize the driver before executing the
current command, if the initialization has not already been performed.
However, a bug in the routine causes it to skip the command after
doing the initialization.  Also, the routine does not return an
appropriate error code if either the initialization or the command
fails.

As a result of the first bug, the first command (a SCSI INQUIRY) is
not carried out.  The results can be seen in the system log, in the
form of a warning message and empty or garbage INQUIRY data:

Apr 18 22:40:08 notebook2 kernel: scsi host6: scsi scan: INQUIRY result too short (5), using 36
Apr 18 22:40:08 notebook2 kernel: scsi 6:0:0:0: Direct-Access                                    PQ: 0 ANSI: 0

This patch fixes both errors.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: properly handle host or gadget initialization failure

[ Upstream commit c4a0bbbdb7f6e3c37fa6deb3ef28c5ed99da6175 ]

If ci_hdrc_host_init() or ci_hdrc_gadget_init() returns error and the
error != -ENXIO, as Peter pointed out, "it stands for initialization
for host or gadget has failed", so we'd better return failure rather
continue.

And before destroying the otg, i.e ci_hdrc_otg_destroy(ci), we should
also check ci->roles[CI_ROLE_GADGET].

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arp: honour gratuitous ARP _replies_

[ Upstream commit 23d268eb240954e6e78f7cfab04f2b1e79f84489 ]

When arp_accept is 1, gratuitous ARPs are supposed to override matching
entries irrespective of whether they arrive during locktime. This was
implemented in commit 56022a8fdd87 ("ipv4: arp: update neighbour address
when a gratuitous arp is received and arp_accept is set")

There is a glitch in the patch though. RFC 2002, section 4.6, "ARP,
Proxy ARP, and Gratuitous ARP", defines gratuitous ARPs so that they can
be either of Request or Reply type. Those Reply gratuitous ARPs can be
triggered with standard tooling, for example, arping -A option does just
that.

This patch fixes the glitch, making both Request and Reply flavours of
gratuitous ARPs to behave identically.

As per RFC, if gratuitous ARPs are of Reply type, their Target Hardware
Address field should also be set to the link-layer address to which this
cache entry should be updated. The field is present in ARP over Ethernet
but not in IEEE 1394. In this patch, I don't consider any broadcasted
ARP replies as gratuitous if the field is not present, to conform the
standard. It's not clear whether there is such a thing for IEEE 1394 as
a gratuitous ARP reply; until it's cleared up, we will ignore such
broadcasts. Note that they will still update existing ARP cache entries,
assuming they arrive out of locktime time interval.

Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

neighbour: update neigh timestamps iff update is effective

[ Upstream commit 77d7123342dcf6442341b67816321d71da8b2b16 ]

It's a common practice to send gratuitous ARPs after moving an
IP address to another device to speed up healing of a service. To
fulfill service availability constraints, the timing of network peers
updating their caches to point to a new location of an IP address can be
particularly important.

Sometimes neigh_update calls won't touch neither lladdr nor state, for
example if an update arrives in locktime interval. The neigh->updated
value is tested by the protocol specific neigh code, which in turn
will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the
call to neigh_update() or not. As a result, we may effectively ignore
the update request, bailing out of touching the neigh entry, except that
we still bump its timestamps inside neigh_update.

This may be a problem for updates arriving in quick succession. For
example, consider the following scenario:

A service is moved to another device with its IP address. The new device
sends three gratuitous ARP requests into the network with ~1 seconds
interval between them. Just before the first request arrives to one of
network peer nodes, its neigh entry for the IP address transitions from
STALE to DELAY.  This transition, among other things, updates
neigh->updated. Once the kernel receives the first gratuitous ARP, it
ignores it because its arrival time is inside the locktime interval. The
kernel still bumps neigh->updated. Then the second gratuitous ARP
request arrives, and it's also ignored because it's still in the (new)
locktime interval. Same happens for the third request. The node
eventually heals itself (after delay_first_probe_time seconds since the
initial transition to DELAY state), but it just wasted some time and
require a new ARP request/reply round trip. This unfortunate behaviour
both puts more load on the network, as well as reduces service
availability.

This patch changes neigh_update so that it bumps neigh->updated (as well
as neigh->confirmed) only once we are sure that either lladdr or entry
state will change). In the scenario described above, it means that the
second gratuitous ARP request will actually update the entry lladdr.

Ideally, we would update the neigh entry on the very first gratuitous
ARP request. The locktime mechanism is designed to ignore ARP updates in
a short timeframe after a previous ARP update was honoured by the kernel
layer. This would require tracking timestamps for state transitions
separately from timestamps when actual updates are received. This would
probably involve changes in neighbour struct. Therefore, the patch
doesn't tackle the issue of the first gratuitous APR ignored, leaving
it for a follow-up.

Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libahci: properly propagate return value of platform_get_irq()

[ Upstream commit c034640a32f8456018d9c8c83799ead683046b95 ]

When platform_get_irq() fails, it returns an error code, which
libahci_platform and replaces it by -EINVAL. This commit fixes that by
propagating the error code. It fixes the situation where
platform_get_irq() returns -EPROBE_DEFER because the interrupt
controller is not available yet, and generally looks like the right
thing to do.

We pay attention to not show the "no irq" message when we are in an
EPROBE_DEFER situation, because the driver probing will be retried
later on, once the interrupt controller becomes available to provide
the interrupt.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix incorrect error return ret being passed to mapping_set_error

[ Upstream commit bff5baf8aa37a97293725a16c03f49872249c07e ]

The setting of return code ret should be based on the error code
passed into function end_extent_writepage and not on ret. Thanks
to Liu Bo for spotting this mistake in the original fix I submitted.

Detected by CoverityScan, CID#1414312 ("Logically dead code")

Fixes: 5dca6eea91653e ("Btrfs: mark mapping with error flag to report errors to userspace")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: keystone: check return value

[ Upstream commit 018047a1dba7636e1f7fdae2cc290a528991d648 ]

Function devm_clk_get() returns an ERR_PTR when it fails. However, in
function kdwc3_probe(), its return value is not checked, which may
result in a bad memory access bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()

[ Upstream commit baae03a0e2497f49704628fd0aaf993cf98e1b99 ]

The DMA_PREP_FENCE is to be used when preparing Tx descriptor if output
of Tx descriptor is to be used by next/dependent Tx descriptor.

The DMA_PREP_FENSE will not be set correctly in do_async_gen_syndrome()
when calling dma->device_prep_dma_pq() under following conditions:
1. ASYNC_TX_FENCE not set in submit->flags
2. DMA_PREP_FENCE not set in dma_flags
3. src_cnt (= (disks - 2)) is greater than dma_maxpq(dma, dma_flags)

This patch fixes DMA_PREP_FENCE usage in do_async_gen_syndrome() taking
inspiration from do_async_xor() implementation.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: avoid dad-failures for addresses with NODAD

[ Upstream commit 66eb9f86e50547ec2a8ff7a75997066a74ef584b ]

Every address gets added with TENTATIVE flag even for the addresses with
IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process
we realize it's an address with NODAD and complete the process without
sending any probe. However the TENTATIVE flags stays on the
address for sometime enough to cause misinterpretation when we receive a NS.
While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED
and endup with an address that was originally configured as NODAD with
DADFAILED.

We can't avoid scheduling dad_work for addresses with NODAD but we can
avoid adding TENTATIVE flag to avoid this racy situation.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6qdl-wandboard: Fix audio channel swap

[ Upstream commit 79935915300c5eb88a0e94fa9148a7505c14a02a ]

When running a stress playback/stop loop test on a mx6wandboard channel
swaps can be noticed randomly.

Increasing the SGTL5000 LRCLK pad strength to its maximum value fixes
the issue, so add the 'lrclk-strength' property to avoid the audio
channel swaps.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/tsc: Provide 'tsc=unstable' boot parameter

[ Upstream commit 8309f86cd41e8714526867177facf7a316d9be53 ]

Since the clocksource watchdog will only detect broken TSC after the
fact, all TSC based clocks will likely have observed non-continuous
values before/when switching away from TSC.

Therefore only thing to fully avoid random clock movement when your
BIOS randomly mucks with TSC values from SMI handlers is reporting the
TSC as unstable at boot.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning

[ Upstream commit dea20579a69ab68cdca6adf79bb7c0c162eb9b72 ]

staging: wlan-ng: prism2mgmt.c: This patches fixes a double endian conversion.
cpu_to_le16() was called twice first in prism2mgmt_scan and again inside
hfa384x_drvr_setconfig16() for the same variable, hence it was swapped
twice. Incidentally, it also fixed the following sparse warning:

drivers/staging/wlan-ng/prism2mgmt.c:173:30: warning: incorrect type in assignment (different base types)
drivers/staging/wlan-ng/prism2mgmt.c:173:30:    expected unsigned short [unsigned] [usertype] word
drivers/staging/wlan-ng/prism2mgmt.c:173:30:    got restricted __le16 [usertype] <noident>

Unfortunately, only compile tested.

Signed-off-by: Andrea della Porta <sfaragnaus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin

[ Upstream commit 2fe4bff3516924a37e083e3211364abe59db1161 ]

Currently the following errors are seen:

[   14.015056] mc13xxx 0-0008: Failed to read IRQ status: -6
[   27.321093] mc13xxx 0-0008: Failed to read IRQ status: -6
[   27.411681] mc13xxx 0-0008: Failed to read IRQ status: -6
[   27.456281] mc13xxx 0-0008: Failed to read IRQ status: -6
[   30.527106] mc13xxx 0-0008: Failed to read IRQ status: -6
[   36.596900] mc13xxx 0-0008: Failed to read IRQ status: -6

Also when reading the interrupts via 'cat /proc/interrupts' the
PMIC GPIO interrupt counter does not stop increasing.

The reason for the storm of interrupts is that the PUS field of
register IOMUXC_SW_PAD_CTL_PAD_CSI0_DAT5 is currently configured as:
10 : 100k pullup

and the PMIC interrupt is being registered as IRQ_TYPE_LEVEL_HIGH type,
which is the correct type as per the MC34708 datasheet.

Use the default power on value for the IOMUX, which sets PUS field as:
00: 360k pull down

This prevents the spurious PMIC interrupts from happening.

Commit e1ffceb078c6 ("ARM: imx53: qsrb: fix PMIC interrupt level")
correctly described the irq type as IRQ_TYPE_LEVEL_HIGH, but
missed to update the IOMUX of the PMIC GPIO as pull down.

Fixes: e1ffceb078c6 ("ARM: imx53: qsrb: fix PMIC interrupt level")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PowerCap: Fix an error code in powercap_register_zone()

[ Upstream commit 216c4e9db4c9d1d2a382b42880442dc632cd47d9 ]

In the current code we accidentally return the successful result from
idr_alloc() instead of a negative error pointer.  The caller is looking
for an error pointer and so it treats the returned value as a valid
pointer.

This one might be a bit serious because if it lets people get around the
kernel's protection for remapping NULL.  I'm not sure.

Fixes: 75d2364ea0ca (PowerCap: Add class driver)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: brcmstb_gisb: correct support for 64-bit address output

[ Upstream commit 0c2aa0e4b308815e877601845c1a89913f9bd2b9 ]

The GISB bus can support addresses beyond 32-bits.  So this commit
corrects support for reading a captured 64-bit address into a 64-bit
variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR
register (when present) and then outputting the full 64-bit value.

It also removes unused definitions.

Fixes: 44127b771d9c ("bus: add Broadcom GISB bus arbiter timeout/error handler")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: brcmstb_gisb: Use register offsets with writes too

[ Upstream commit 856c7ccb9ce7a061f04bdf586f649cb93654e294 ]

This commit corrects the bug introduced in commit f80835875d3d
("bus: brcmstb_gisb: Look up register offsets in a table") such
that gisb_write() translates the register enumeration into an
offset from the base address for writes as well as reads.

Fixes: f80835875d3d ("bus: brcmstb_gisb: Look up register offsets in a table")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB2: Fix share type handling

[ Upstream commit cd1230070ae1c12fd34cf6a557bfa81bf9311009 ]

In fs/cifs/smb2pdu.h, we have:
#define SMB2_SHARE_TYPE_DISK    0x01
#define SMB2_SHARE_TYPE_PIPE    0x02
#define SMB2_SHARE_TYPE_PRINT   0x03

Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can
never trigger and printer share would be interpreted as disk share.

So, test the ShareType value for equality instead.

Fixes: faaf946a7d5b ("CIFS: Add tree connect/disconnect capability for SMB2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmxnet3: ensure that adapter is in proper state during force_close

[ Upstream commit 1c4d5f51a812a82de97beee24f48ed05c65ebda5 ]

There are several paths in vmxnet3, where settings changes cause the
adapter to be brought down and back up (vmxnet3_set_ringparam among
them).  Should part of the reset operation fail, these paths call
vmxnet3_force_close, which enables all napi instances prior to calling
dev_close (with the expectation that vmxnet3_close will then properly
disable them again).  However, vmxnet3_force_close neglects to clear
VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close.  As a result
vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and
leaves all the napi instances in a enabled state while the device itself
is closed.  If a device in this state is activated again, napi_enable
will be called on already enabled napi_instances, leading to a BUG halt.

The fix is to simply enausre that the QUIESCED bit is cleared in
vmxnet3_force_close to allow quesence to be completed properly on close.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S PR: Check copy_to/from_user return values

[ Upstream commit 67325e988faea735d663799b6d152b5f4254093c ]

The PR KVM implementation of the PAPR HPT hypercalls (H_ENTER etc.)
access an image of the HPT in userspace memory using copy_from_user
and copy_to_user.  Recently, the declarations of those functions were
annotated to indicate that the return value must be checked.  Since
this code doesn't currently check the return value, this causes
compile warnings like the ones shown below, and since on PPC the
default is to compile arch/powerpc with -Werror, this causes the
build to fail.

To fix this, we check the return values, and if non-zero, fail the
hypercall being processed with a H_FUNCTION error return value.
There is really no good error return value to use since PAPR didn't
envisage the possibility that the hypervisor may not be able to access
the guest's HPT, and H_FUNCTION (function not supported) seems as
good as any.

The typical compile warnings look like this:

  CC      arch/powerpc/kvm/book3s_pr_papr.o
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c: In function ‘kvmppc_h_pr_enter’:
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:53:2: error: ignoring return value of ‘copy_from_user’, declared with attribute warn_unused_result [-Werror=unused-result]
  copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg));
  ^
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:74:2: error: ignoring return value of ‘copy_to_user’, declared with attribute warn_unused_result [-Werror=unused-result]
  copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE);
  ^

... etc.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - force relative mode on a certain module

[ Upstream commit d899520b0431e70279bfb5066ecb6dc91d0b7072 ]

One of Elan modules with sample version is 0x74 and hw_version is 0x03 has
a bug in absolute mode implementation, so let it run in default PS/2
relative mode.

Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - check if device is there before really probing

[ Upstream commit c5928551fd41b2eecdad78fa2be2a4a13ed5fde9 ]

Before trying to properly initialize the touchpad and generate bunch of
errors, let's first see it there is anything at the given address. If we
get error, fail silently with -ENXIO.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netxen_nic: set rcode to the return status from the call to netxen_issue_cmd

[ Upstream commit 0fe20fafd1791f993806d417048213ec57b81045 ]

Currently rcode is being initialized to NX_RCODE_SUCCESS and later it
is checked to see if it is not NX_RCODE_SUCCESS which is never true. It
appears that there is an unintentional missing assignment of rcode from
the return of the call to netxen_issue_cmd() that was dropped in
an earlier fix, so add it in.

Detected by CoverityScan, CID#401900 ("Logically dead code")

Fixes: 2dcd5d95ad6b2 ("netxen_nic: fix cdrp race condition")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qca_spi: Fix alignment issues in rx path

[ Upstream commit 8d66c30b12ed3cb533696dea8b9a9eadd5da426a ]

The qca_spi driver causes alignment issues on ARM devices.
So fix this by using netdev_alloc_skb_ip_align().

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op

[ Upstream commit f36ea50ca0043e7b1204feaf1d2ba6bd68c08d36 ]

When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns
"Input/output error". Looks block layer split the bio after calling
bio_integrity_prep(bio). This patch fixes the issue.

Below is how we debug this issue:
(1)format nvme to 4K block # size with type 2 DIF
(2)dd with block size bigger than 1024k.
oflag=direct
dd: error writing '/dev/nvme0n1': Input/output error

We added some debug code in nvme device driver. It showed us the first
op and the second op have the same bi and pi address. This is not
correct.

1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400,
dsmgmt=0x0, AT=0x0 & RT=0x505
Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828

2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0,
AT=0x0 & RT=0x605  ==> This op fails and subsequent 5 retires..
Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828

With the fix, It showed us both of the first op and the second op have
correct bi and pi address.

1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400,
dsmgmt=0x0, AT=0x0 & RT=0x505
Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual
0x00002828
2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0,
AT=0x0 & RT=0x605
Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual
0x00003028

Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: silence lockdep splat in cifs_relock_file()

[ Upstream commit 560d388950ceda5e7c7cdef7f3d9a8ff297bbf9d ]

cifs_relock_file() can perform a down_write() on the inode's lock_sem even
though it was already performed in cifs_strict_readv().  Lockdep complains
about this.  AFAICS, there is no problem here, and lockdep just needs to be
told that this nesting is OK.

 =============================================
 [ INFO: possible recursive locking detected ]
 4.11.0+ #20 Not tainted
 ---------------------------------------------
 cat/701 is trying to acquire lock:
  (&cifsi->lock_sem){++++.+}, at: cifs_reopen_file+0x7a7/0xc00

 but task is already holding lock:
  (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&cifsi->lock_sem);
   lock(&cifsi->lock_sem);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 1 lock held by cat/701:
  #0:  (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310

 stack backtrace:
 CPU: 0 PID: 701 Comm: cat Not tainted 4.11.0+ #20
 Call Trace:
  dump_stack+0x85/0xc2
  __lock_acquire+0x17dd/0x2260
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  ? preempt_schedule_irq+0x6b/0x80
  lock_acquire+0xcc/0x260
  ? lock_acquire+0xcc/0x260
  ? cifs_reopen_file+0x7a7/0xc00
  down_read+0x2d/0x70
  ? cifs_reopen_file+0x7a7/0xc00
  cifs_reopen_file+0x7a7/0xc00
  ? printk+0x43/0x4b
  cifs_readpage_worker+0x327/0x8a0
  cifs_readpage+0x8c/0x2a0
  generic_file_read_iter+0x692/0xd00
  cifs_strict_readv+0x29f/0x310
  generic_file_splice_read+0x11c/0x1c0
  do_splice_to+0xa5/0xc0
  splice_direct_to_actor+0xfa/0x350
  ? generic_pipe_buf_nosteal+0x10/0x10
  do_splice_direct+0xb5/0xe0
  do_sendfile+0x278/0x3a0
  SyS_sendfile64+0xc4/0xe0
  entry_SYSCALL_64_fastpath+0x1f/0xbe

Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1: Work around a Linux server bug...

[ Upstream commit f4b23de3dda1536590787c9e5c3d16b8738ab108 ]

It turns out the Linux server has a bug in its implementation of
supattr_exclcreat; it returns the set of all attributes, whether
or not they are supported by minor version 1.
In order to avoid a regression, we therefore apply the supported_attrs
as a mask on top of whatever the server sent us.

Reported-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_en: Avoid adding steering rules with invalid ring

[ Upstream commit 89c557687a32c294e9d25670a96e9287c09f2d5f ]

Inserting steering rules with illegal ring is an invalid operation,
block it.

Fixes: 820672812f82 ('net/mlx4_en: Manage flow steering rules with ethtool')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: move _text symbol to address higher than zero

[ Upstream commit d04a4c76f71dd5335f8e499b59617382d84e2b8d ]

The perf tool assumes that kernel symbols are never present at address
zero. In fact it assumes if functions that map symbols to addresses
return zero, that the symbol was not found.

Given that s390's _text symbol historically is located at address zero
this yields at least a couple of false errors and warnings in one of
perf's test cases about not present symbols ("perf test 1").

To fix this simply move the _text symbol to address 0x200, just behind
the initial psw and channel program located at the beginning of the
kernel image. This is now hard coded within the linker script.

I tried a nicer solution which moves the initial psw and channel
program into an own section. However that would move the symbols
within the "real" head.text section to different addresses, since the
".org" statements within head.S are relative to the head.text
section. If there is a new section in front, everything else will be
moved. Alternatively I could have adjusted all ".org" statements. But
this current solution seems to be the easiest one, since nobody really
cares where the _text symbol is actually located.

Reported-by: Zvonko Kosic <zkosic@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid()

[ Upstream commit 8896c23d2ef803f1883fea73117a435925c2b4c4 ]

alloc_pidmap() advances pid_namespace::last_pid.  When first pid
allocation fails, then next created process will have pid 2 and
pid_ns_prepare_proc() won't be called.  So, pid_namespace::proc_mnt will
never be initialized (not to mention that there won't be a child
reaper).

I saw crash stack of such case on kernel 3.10:

    BUG: unable to handle kernel NULL pointer dereference at (null)
    IP: proc_flush_task+0x8f/0x1b0
    Call Trace:
        release_task+0x3f/0x490
        wait_consider_task.part.10+0x7ff/0xb00
        do_wait+0x11f/0x280
        SyS_wait4+0x7d/0x110

We may fix this by restore of last_pid in 0 or by prohibiting of futher
allocations.  Since there was a similar issue in Oleg Nesterov's commit
314a8ad0f18a ("pidns: fix free_pid() to handle the first fork failure").
and it was fixed via prohibiting allocation, let's follow this way, and
do the same.

Link: http://lkml.kernel.org/r/149201021004.4863.6762095011554287922.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow tests

[ Upstream commit 146180c052a00172f4dc08eaade836fd02f61fb5 ]

The "DIV_ROUND_UP(size, PAGE_SIZE)" operation can overflow if "size" is
more than ULLONG_MAX - PAGE_SIZE.

Link: http://lkml.kernel.org/r/20170322111950.GA11279@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lockd: fix lockd shutdown race

[ Upstream commit efda760fe95ea15291853c8fa9235c32d319cd98 ]

As reported by David Jeffery: "a signal was sent to lockd while lockd
was shutting down from a request to stop nfs.  The signal causes lockd
to call restart_grace() which puts the lockd_net structure on the grace
list.  If this signal is received at the wrong time, it will occur after
lockd_down_net() has called locks_end_grace() but before
lockd_down_net() stops the lockd thread.  This leads to lockd putting
the lockd_net structure back on the grace list, then exiting without
anything removing it from the list."

So, perform the final locks_end_grace() from the the lockd thread; this
ensures it's serialized with respect to restart_grace().

Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control

[ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ]

When users set flow control using ethtool the bits are set properly in the
CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n
Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size
reset value. When receive flow control is enabled on a port, the port's
associated FIFO block allocation must be adjusted. The port RX allocation
must increase to accommodate the flow control runout. The TRM recommends
numbers of 5 or 6.

Hence, apply required Port FIFO configuration to
Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during
interface initialization.

Cc: Schuyler Patton <spatton@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: cdc_ncm: Fix TX zero padding

[ Upstream commit aeca3a77b1e0ed06a095933b89c86aed007383eb ]

The zero padding that is added to NTB's does
not zero the memory correctly.
This is because the skb_put modifies the value
of skb_out->len which results in the memset
command not setting any memory to zero as
(ctx->tx_max - skb_out->len) == 0.

I have resolved this by storing the size of
the memory to be zeroed before the skb_put
and using this in the memset call.

Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi_ssif: unlock on allocation failure

[ Upstream commit cf9806f32ef63b745f2486e0dbb2ac21f4ca44f0 ]

We should unlock and re-enable IRQs if this allocation fails.

Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF) ")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qlge: Avoid reading past end of buffer

[ Upstream commit df5303a8aa9a0a6934f4cea7427f1edf771f21c2 ]

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bna: Avoid reading past end of buffer

[ Upstream commit 9e4eb1ce472fbf7b007f23c88ec11c37265e401c ]

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: bail out from prep_connection() if a reconfig is ongoing

[ Upstream commit f8860ce836f2d502b07ef99559707fe55d90f5bc ]

If ieee80211_hw_restart() is called during authentication, the
authentication process will continue, causing the driver to be called
in a wrong state.  This ultimately causes an oops in the iwlwifi
driver (at least).

This fixes bugzilla 195299 partly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_key: Fix slab-out-of-bounds in pfkey_compile_policy.

[ Upstream commit d90c902449a7561f1b1d58ba5a0d11728ce8b0b2 ]

The sadb_x_sec_len is stored in the unit 'byte divided by eight'.
So we have to multiply this value by eight before we can do
size checks. Otherwise we may get a slab-out-of-bounds when
we memcpy the user sec_ctx.

Fixes: df71837d502 ("[LSM-IPSec]: Security association restriction.")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/srpt: Fix abort handling

[ Upstream commit 55d694275f41a1c0eef4ef49044ff29bc3999490 ]

Let the target core check the CMD_T_ABORTED flag instead of the SRP
target driver. Hence remove the transport_check_aborted_status()
call. Since state == SRPT_STATE_CMD_RSP_SENT is something that really
should not happen, do not try to recover if srpt_queue_response() is
called for an I/O context that is in that state. This patch is a bug
fix because the srpt_abort_cmd() call is misplaced - if that function
is called from srpt_queue_response() it should either be called
before the command state is changed or after the response has been
sent.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: David Disseldorp <ddiss@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION

[ Upstream commit 0048fdd06614a4ea088f9fcad11511956b795698 ]

If the server returns NFS4ERR_CONN_NOT_BOUND_TO_SESSION because we
are trunking, then RECLAIM_COMPLETE must handle that by calling
nfs4_schedule_session_recovery() and then retrying.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic()

[ Upstream commit 42fc6c6cb1662ba2fa727dd01c9473c63be4e3b6 ]

Andrey Konovalov reported the following warning while fuzzing the kernel
with syzkaller:

  WARNING: kernel stack regs at ffff8800686869f8 in a.out:4933 has bad 'bp' value c3fc855a10167ec0

The unwinder dump revealed that RBP had a bad value when an interrupt
occurred in csum_partial_copy_generic().

That function saves RBP on the stack and then overwrites it, using it as
a scratch register.  That's problematic because it breaks stack traces
if an interrupt occurs in the middle of the function.

Replace the usage of RBP with another callee-saved register (R15) so
stack traces are no longer affected.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: netdev <netdev@vger.kernel.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Link: http://lkml.kernel.org/r/4b03a961efda5ec9bfe46b7b9c9ad72d1efad343.1493909486.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: snvs: fix an incorrect check of return value

[ Upstream commit 758929005f06f954b7e1c87a1c9fdb44157b228f ]

Function devm_regmap_init_mmio() returns an ERR_PTR on error. However,
in function snvs_rtc_probe() its return value is checked against NULL.
This patch fixes it by checking the return value with IS_ERR().

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock

[ Upstream commit 3d05f3aed5d721c2c77d20288c29ab26c6193ed5 ]

On mainline, there is no functional difference, just less code, and
symmetric lock/unlock paths.

On PREEMPT_RT builds, this fixes the following warning, seen by
Alexander GQ Gerasiov, due to the sleeping nature of spinlocks.

   BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:993
   in_atomic(): 0, irqs_disabled(): 1, pid: 58, name: kworker/u12:1
   CPU: 5 PID: 58 Comm: kworker/u12:1 Tainted: G        W       4.9.20-rt16-stand6-686 #1
   Hardware name: Supermicro SYS-5027R-WRF/X9SRW-F, BIOS 3.2a 10/28/2015
   Workqueue: writeback wb_workfn (flush-253:0)
   Call Trace:
    dump_stack+0x47/0x68
    ? migrate_enable+0x4a/0xf0
    ___might_sleep+0x101/0x180
    rt_spin_lock+0x17/0x40
    add_stripe_bio+0x4e3/0x6c0 [raid456]
    ? preempt_count_add+0x42/0xb0
    raid5_make_request+0x737/0xdd0 [raid456]

Reported-by: Alexander GQ Gerasiov <gq@redlab-i.ru>
Tested-by: Alexander GQ Gerasiov <gq@redlab-i.ru>
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: make RATE_INFO_BW_20 the default

[ Upstream commit 842be75c77cb72ee546a2b19da9c285fb3ded660 ]

Due to the way I did the RX bitrate conversions in mac80211 with
spatch, going setting flags to setting the value, many drivers now
don't set the bandwidth value for 20 MHz, since with the flags it
wasn't necessary to (there was no 20 MHz flag, only the others.)

Rather than go through and try to fix up all the drivers, instead
renumber the enum so that 20 MHz, which is the typical bandwidth,
actually has the value 0, making those drivers all work again.

If VHT was hit used with a driver not reporting it, e.g. iwlmvm,
this manifested in hitting the bandwidth warning in
cfg80211_calculate_bitrate_vht().

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.127