Also mention Yue Lu in previous commit's entry.

2013-09-18  Pedro Alves  <palves@redhat.com>
    Yue Lu  <hacklu.newborn@gmail.com>

* gnu-nat.c (inf_validate_procs, gnu_wait, gnu_resume)
(gnu_create_inferior)
(gnu_attach, gnu_thread_alive, gnu_pid_to_str, cur_thread)
(set_sig_thread_cmd): Use the lwpid field of ptids to
store/extract thread ids instead of the tid field.
* i386gnu-nat.c (gnu_fetch_registers): Adjust.

Subject: [PATCH] [Hurd/gnu-nat.c] Use ptid_t.lwpid to store thread ids
 instead of ptid_t.tid.

In preparation for reusing gnu-nat.c in gdbserver, switch to storing
thread ids in the lwpid field of ptid_t rather than in the tid
field.  The Hurd's thread model is 1:1, so it doesn't feel wrong
anyway.

gdb/
2013-09-18  Pedro Alves  <palves@redhat.com>

* gnu-nat.c (inf_validate_procs, gnu_wait, gnu_resume)
(gnu_create_inferior)
(gnu_attach, gnu_thread_alive, gnu_pid_to_str, cur_thread)
(set_sig_thread_cmd): Use the lwpid field of ptids to
store/extract thread ids instead of the tid field.
* i386gnu-nat.c (gnu_fetch_registers): Adjust.

Consistent display of "<optimized out>" for register values.

  https://sourceware.org/ml/gdb-patches/2013-08/msg00170.html

gdb/ChangeLog

        * infcmd.c (default_print_one_register_info): Add detection of
        optimized out values.
        (default_print_registers_info): Switch to using
        get_frame_register_value.

gdb/testsuite/ChangeLog

        * gdb.dwarf2/dw2-reg-undefined.exp: Change pattern for info
        register to "<optimized out>", and also print the registers.

2013-09-18  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

* ld-aarch64/eh-frame.d: Update expected output to allow for
64-bit addresses.

gdbserver --wrapper also doesn't work on Cygwin.

Skip the test on Cygwin too.

2013-09-18  Pedro Alves  <palves@redhat.com>

PR server/15967
* gdb.server/wrapper.exp: Also return unsupported for Cygwin, and
change text.

When reverse-stepping, only insert a resume breakpoint at ecs->stop_func_start
if the function start is known.  Otherwise, keep single-stepping.

[Hurd/gnu-nat] Fix old "signal-thread" command regression.

By inspection, I noticed that when I made the gnu-nat use
ptid(pid,0,tid) to represent a thread, instead of using ptid(tid,0,0),
in <https://sourceware.org/ml/gdb-patches/2008-08/msg00175.html>, I
introduced a bug.

The change was:

   else
     {
-      int tid = PIDGET (thread_id_to_pid (atoi (args)));
+      int tid = ptid_get_tid (thread_id_to_pid (atoi (args)));
       if (tid < 0)
  error (_("Thread ID %s not known.  Use the \"info threads\" command to\n"
         "see the IDs of currently known threads."), args);

and thread_id_to_pid does:

 ptid_t
 thread_id_to_pid (int num)
 {
   struct thread_info *thread = find_thread_id (num);

   if (thread)
     return thread->ptid;
   else
     return pid_to_ptid (-1);
 }

(pid_to_ptid (-1) is the same as minus_one_ptid.)

So before, we were really looking at the pid, where thread_id_to_pid
stores the -1.

The right fix is to compare the whole ptid to minus_one_ptid, of
course.

Completely untested, but I think it's obvious enough, so I went ahead
and put it in.

gdb/
2013-09-18  Pedro Alves  <palves@redhat.com>

* gnu-nat.c (set_sig_thread_cmd): Compare the thread's ptid to
minus_one_ptid instead of looking at the ptid's tid field and
comparing that to -1.

Fix whitespace error in previous commit.

  https://sourceware.org/ml/gdb-cvs/2013-09/msg00108.html
  https://sourceware.org/ml/gdb-patches/2013-09/msg00225.html

gdb/ChangeLog

        * main.h (get_gdb_program_name): Remove extra whitespace.

Add new function to access gdb_program_name.

  https://sourceware.org/ml/gdb-patches/2013-09/msg00225.html

gdb/ChangeLog

        * main.h (get_gdb_program_name): Add declaration.
        * main.c (get_gdb_program_name): Add definition.

bfd/
2013-09-18  Tristan Gingold  <gingold@adacore.com>

* configure.in: Bump version to 2.24.51
* configure: Regenerate.

binutils/
2013-09-18  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.24.

gas/
2013-09-18  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.24.

ld/
2013-09-18  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.24.

2013-09-18  Tristan Gingold  <gingold@adacore.com>

* Makefile.am (LEXLIB): Define.  Replase references to @LEXLIB@
by $(LEXLIB).
* Makefile.in: Regenerate.

* config/tc-msp430.c (OPTION_MOVE_DATA): Define.
(move_data): New variable.
(md_parse_option): Parse -md.
(msp430_section): New function.  Catch references to the .bss or
.data sections and generate a special symbol for use by the libcrt
library.
(md_pseudo_table): Intercept .section directives.
(md_longopt): Add -md
(md_show_usage): Likewise.
(msp430_operands): Generate a warning message if a NOP is inserted
into the instruction stream.
* doc/c-msp430.texi (node MSP430 Options): Document -md option.

gdb/gdbserver/

2013-09-18  Yao Qi  <yao@codesourcery.com>

PR server/15959
* server.c (start_inferior): Clear 'resume_info'.

gdb/testsuite/

2013-09-18  Yao Qi  <yao@codesourcery.com>

* gdb.server/wrapper.c: New.
* gdb.server/wrapper.exp: New.

gdb/gdbserver/

Fix ChangeLog format issue.

daily update

* dwarf2read.c: Move definitions of complaint functions to after
forward declarations of local functions.

2013-09-17  Doug Gilmore  <Doug.Gilmore@imgtec.com>

* readelf.c (get_machine_flags): Handle EF_MIPS_FP64.

2013-09-17  Doug Gilmore  <Doug.Gilmore@imgtec.com>

* config/tc-mips.c (mips_elf_final_processing): Set
EF_MIPS_FP64 for -mgp32 -mfp64, removing old FIXME.

2013-09-17  Doug Gilmore  <Doug.Gilmore@imgtec.com>

* elfxx-mips.c (_bfd_mips_elf_print_private_bfd_data): Handle
EF_MIPS_FP64.

2013-09-17  Doug Gilmore  <Doug.Gilmore@imgtec.com>

* mips.h (EF_MIPS_FP64): New e_flags bit.

PR gdb/11568 - delete thread-specific breakpoints on thread exit

PR gdb/11568 is about thread-specific breakpoints being left behind
when the corresponding thread exits.

Currently:

 (gdb) b start thread 2
 Breakpoint 3 at 0x400614: file thread-specific-bp.c, line 23.
 (gdb) b end
 Breakpoint 4 at 0x40061f: file thread-specific-bp.c, line 29.
 (gdb) c
 Continuing.
 [Thread 0x7ffff7fcb700 (LWP 14925) exited]
 [Switching to Thread 0x7ffff7fcc740 (LWP 14921)]

 Breakpoint 4, end () at thread-specific-bp.c:29
 29      }
 (gdb) info threads
   Id   Target Id         Frame
 * 1    Thread 0x7ffff7fcc740 (LWP 14921) "thread-specific" end () at thread-specific-bp.c:29
 (gdb) info breakpoints
 Num     Type           Disp Enb Address            What
 2       breakpoint     keep y   0x0000000000400614 in start at thread-specific-bp.c:23
         breakpoint already hit 1 time
 3       breakpoint     keep y   0x0000000000400614 in start at thread-specific-bp.c:23 thread 2
         stop only in thread 2
 4       breakpoint     keep y   0x000000000040061f in end at thread-specific-bp.c:29
         breakpoint already hit 1 time

Note that the thread-specific breakpoint 3 stayed around, even though
thread 2 is gone.

There's no way that breakpoint can trigger again (*), so the PR argues
that the breakpoint should just be removed, like local watchpoints.
I'm ambivalent on this -- it could be reasonable to disable the
breakpoint (kind of like breakpoint in shared library code when the
DSO is unloaded), so the user could still use it as visual template
for creating other breakpoints (copy/paste command lists, etc.), or we
could have a way to change to which thread a breakpoint applies.  But,
several people pushed this direction, and I don't plan on arguing...

(*) - actually, there is ...  thread numbers are reset on "run", so
the user could do "break foo thread 2", "run", and expect the
breakpoint to hit again on the second thread.  But given gdb's thread
numbering can't really be stable, that'd only work sufficiently well
for thread 1, so we'd better call it unsupported.

So with the patch, whenever a thread is deleted from GDB's list, GDB
goes through the thread-specific breakpoints and deletes corresponding
breakpoints.  Since this is user-visible, GDB prints out:

  Thread-specific breakpoint 3 deleted - thread 2 is gone.

And of course, we end up with:

 (gdb) info breakpoints
 Num     Type           Disp Enb Address            What
 2       breakpoint     keep y   0x0000000000400614 in start at thread-specific-bp.c:23
         breakpoint already hit 1 time
 4       breakpoint     keep y   0x000000000040061f in end at thread-specific-bp.c:29
         breakpoint already hit 1 time

2013-09-17  Muhammad Waqas <mwaqas@codesourcery.com>
    Pedro Alves  <palves@redhat.com>

PR gdb/11568
* breakpoint.c (remove_threaded_breakpoints): New function.
(_initialize_breakpoint): Attach remove_threaded_breakpoints
as thread_exit observer.

2013-09-17  Muhammad Waqas  <mwaqas@codesourccery.com>
    Jan Kratochvil  <jan.kartochvil@redhat.com>
    Pedro Alves  <palves@redhat.com>

PR gdb/11568
* gdb.thread/thread-specific-bp.c: New file.
* gdb.thread/thread-specific-bp.exp: New file.

This commit fixes a regression introduced by the new $_isvoid convenience
function.  It adds a check for $_isvoid during the test of "show convenience"
output.

gdb/testsuite/
2013-09-17  Sergio Durigan Junior  <sergiodj@redhat.com>

* gdb.base/defaults.exp (<show_conv_list>): Add check for $_isvoid
convenience function.

PR gdb/15911: "info threads" changes the default source and line (for "break", "list")

"info threads" changes the default source for "break" and "list", to
whatever the location of the first/bottom thread in the thread list
is...

 (gdb) b start
 (gdb) c
 ...
 (gdb) list
 *lists "start"*
 (gdb) b 23
 Breakpoint 3 at 0x400614: file test.c, line 23.
 (gdb) info threads
   Id   Target Id         Frame
 * 2    Thread 0x7ffff7fcb700 (LWP 1760) "test" start (arg=0x0) at test.c:23
   1    Thread 0x7ffff7fcc740 (LWP 1748) "test" 0x000000323dc08e60 in pthread_join (threadid=140737353922304, thread_return=0x0) at pthread_join.c:93
 (gdb) b 23
 Breakpoint 4 at 0x323dc08d90: file pthread_join.c, line 23.
                                    ^^^^^^^^^^^^^^^
 (gdb) list
 93          lll_wait_tid (pd->tid);
 94
 95
 96        /* Restore cancellation mode.  */
 97        CANCEL_RESET (oldtype);
 98
 99        /* Remove the handler.  */
 100       pthread_cleanup_pop (0);
 101
 102

The issue is that print_stack_frame always sets the current sal to the
frame's sal.  print_frame_info (which print_stack_frame calls to do
most of the work) also sets the last displayed sal, but only if
print_what isn't LOCATION.  Now the call in question, from within
thread.c:print_thread_info, does pass in LOCATION as print_what, but
print_stack_frame doesn't have the same check print_frame_info has.
We could consider adding it, but setting these globals depending on
print_what isn't very clean, IMO.  What we have is two logically
distinct operations mixed in the same function(s):

  #1 - print frame, in the format specified by {print_what,
    print_level and print_args}.

  #2 - We're displaying a frame to the user, and I want the default
    sal to point here, because the program stopped here, or the user
    did some context-changing command (up, down, etc.).

So I added a new parameter to print_stack_frame & friends for point
#2, and went through all calls in the tree adjusting as necessary.

Tested on x86_64 Fedora 17.

gdb/
2013-09-17  Pedro Alves  <palves@redhat.com>

PR gdb/15911
* ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
* corelow.c (core_open):
* frame.h (print_stack_frame, print_frame_info): New
'set_current_sal' parameter.
* infcmd.c (finish_command, kill_command): Adjust call to
print_stack_frame.
* inferior.c (inferior_command): Likewise.
* infrun.c (normal_stop): Likewise.
* linux-fork.c (linux_fork_context): Likewise.
* record-full.c (record_full_goto_entry, record_full_restore):
Likewise.
* remote-mips.c (common_open): Likewise.
* stack.c (print_stack_frame): New 'set_current_sal' parameter.
Use it.
(print_frame_info): New 'set_current_sal' parameter.  Set the last
displayed sal depending on the new paremeter instead of looking at
print_what.
(backtrace_command_1, select_and_print_frame, frame_command)
(current_frame_command, up_command, down_command): Adjust call to
print_stack_frame.
* thread.c (print_thread_info, restore_selected_frame)
(do_captured_thread_select): Adjust call to print_stack_frame.
* tracepoint.c (tfind_1): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_info_frame): Likewise.
* mi/mi-interp.c (mi_on_normal_stop): Likewise.
* mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.

gdb/testsuite/
* gdb.threads/info-threads-cur-sal-2.c: New file.
* gdb.threads/info-threads-cur-sal.c: New file.
* gdb.threads/info-threads-cur-sal.exp: New file.

Fix ChangeLog entry missing a ':' char.

  gdbserver/ChangeLog

* linux-tile-low.c (tile_regsets): Modify the size field to 64-bit
for each register.

PR ld/15957
* deffilep.y (def_file_add_directive): Avoid readin past end of
buffer.

2013-09-16  Jiong Wang  <jiwang@tilera.com>

  gdbserver/ChangeLog

        * configure.srv <tilegx*-*-linux*>: Remove linux-osdata.o from and add
linux-tile-low.o to srv_tgtobj.

opcodes/
* s390-opc.txt (clih): Make the immediate unsigned.

gas/testsuite/
* gas/s390/zarch-z196.s, gas/s390/zarch-z196.d: Test CLIH with
4000000000.

gdb/testsuite/

* gdb.base/catch-load.c: Remove the include of "dlfcn.h".
 [__WIN32__]: Include "windows.h" and define macro dlopen
 and dlclose.
[!__WIN32__]: Include "dlfcn.h".
* gdb.base/catch-load.exp (one_catch_load_test): Match
directory separator.

daily update

* lib/gdb.exp (using_fission): New proc.
* gdb.base/info-macros.exp: Skip test if using Fission.

* gdb.base/break-interp.exp: Fix indentation.

The error message in the function was saying
"You should provide one parameter..." while it should be saying "... one
argument...".  Replaced.

2013-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>

* value.c (isvoid_internal_fn): Replace "parameter" with
"argument".

* README: Update references to writing code for GDB.
* configure.ac (build_warnings): Remove obsolete comment.
* configure: Regenerate.
* gdbarch.sh: Remove references to gdbint.texinfo.
* gdbarch.h: Regenerate.
* gdbtypes.c (objfile_type): Remove comments referencing internals
manual and D10V.

[gdb/doc]
Remove the internals manual gdbint.texinfo.
* Makefile.in (INFO_DEPS): Remove gdbint.info.
(PDFFILES): Remove gdbint.pdf.
(HTMLFILES): Remove gdbint/index.html.
(HTMLFILES_INSTALL): Remove gdbint.
(GDBINT_DOC_FILES): Remove.
(dvi): Remove gdbint.dvi.
(ps): Remove gdbint.ps.
* gdbint.texinfo: Remove file.
* gdb.texinfo (Maintenance Commands): Remove reference to gdbint.

Based on the discussion at:

<https://sourceware.org/ml/gdb-patches/2013-09/msg00301.html>
<https://sourceware.org/ml/gdb-patches/2013-09/msg00383.html>

This patch adds a new convenience function called $_isvoid, whose
only purpose is to check whether an expression is void or not.
This became necessary because the new convenience variable
$_exitsignal (not yet approved) has a mutual exclusive behavior
with $_exitcode, i.e., when one is "defined" (i.e., non-void),
the other is cleared (i.e., becomes void).  Doug wanted a way to
identify which variable to use, and checking for voidness is the
obvious solution.

It is worth mentioning that my first attempt, after a conversation with
Doug, was to actually implement a new $_isdefined() convenience
function.  I would do that (for convenience variables) by calling
lookup_only_internalvar.  However, I found a few problems:

- Whenever I called $_isdefined ($variable), $variable became defined
  (with a void value), and $_isdefined always returned true.

- Then, I tried to implement $_isdefined ("variable"), and do the "$" +
  "variable" inside GDB, thus making it impossible for GDB to create the
  convenience variable.  However, it was hard to extract the string
  without having to mess with values and their idiossincrasies.
  Therefore, I decided to abandon this attempt (specially because I
  didn't want to spend too much time struggling with it).

Anyway, after talking to Doug again we decided that it would be easier
to implement $_isvoid, and this will probably help in cases like
<http://stackoverflow.com/questions/3744554/testing-if-a-gdb-convenience-variable-is-defined>.

I wrote a NEWS entry for it, and some new lines on the documentation.

gdb/
2013-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>

* NEWS: Mention new convenience function $_isvoid.
* value.c (isvoid_internal_fn): New function.
(_initialize_values): Add new convenience function $_isvoid.

gdb/doc/
2013-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>

* gdb.texinfo (Convenience Functions): Mention new convenience
function $_isvoid.

gdb/testsuite/
2013-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>

* gdb.base/gdbvars.c (foo_void): New function.
(foo_int): Likewise.
* gdb.base/gdbvars.exp (test_convenience_functions): New
function.  Call it.

gdbserver, aarch64: Zero out regs in aarch64_linux_set_debug_regs.

Apply the same fix that was applied to aarch64-linux-nat.c.

2013-09-16  Will Newton  <will.newton@linaro.org>

* linux-aarch64-low.c (aarch64_linux_set_debug_regs): Zero
out regs.

* arm-linux-tdep.c: Add "elf/common.h" header.
Remove AT_HWCAP macro definintion as it is provided in
added include file.
* s390-tdep.c: Remove system header <elf.h>
Add "elf/common.h" header for AT_HWCAP definition.
(s390_core_read_description): Use correct CORE_ADDR
for hwcap local variable used as third parameter
of function target_auxv_search.

gas/config/tc-arm.c: Fix parsing of NEON load/store element sizes.

The existing code would accept VLD2.64 and similar undefined
instructions.

gas/ChangeLog:

2013-09-16  Will Newton  <will.newton@linaro.org>

* config/tc-arm.c (do_neon_ld_st_interleave): Add constraint
disallowing element size 64 with interleave other than 1.

gas/testsuite/ChangeLog:

2013-09-16  Will Newton  <will.newton@linaro.org>

* gas/arm/neon-ldst-es.d: Add VLD1.64 instructions.
* gas/arm/neon-ldst-es.s: Likewise.
* testsuite/gas/arm/neon-ldst-es-bad.d: New file.
* testsuite/gas/arm/neon-ldst-es-bad.l: Likewise.
* testsuite/gas/arm/neon-ldst-es-bad.s: Likewise.

daily update

daily update

* common/filestuff.c (gdb_fopen_cloexec): Do not try to use "e"
mode if operating system doesn't know O_CLOEXEC.

daily update

Code cleanup: Move variable.

gdb/
2013-09-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

Code cleanup.
* symfile.c (reread_symbols): Move variable obfd_filename to a more
inner block.

gdb/ChangeLog:
2013-09-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

* NEWS: Mention TDB support.
* features/s390-tdb.xml: New file.
* features/s390-te-linux64.xml: New file.
* features/s390x-te-linux64.xml: New file.
* features/Makefile (WHICH): Add new tdescs above.
(s390-te-linux64-expedite): Set.
(s390x-te-linux64-expedite): Set.
* features/s390-te-linux64.c: New file (generated).
* features/s390x-te-linux64.c: New file (generated).
* regformats/s390-te-linux64.dat: New file (generated).
* regformats/s390x-te-linux64.dat: New file (generated).
* s390-tdep.h (HWCAP_S390_HIGH_GPRS): Define.
(HWCAP_S390_TE): Likewise.
(S390_TDB_DWORD0_REGNUM): Likewise.
(S390_TDB_DWORD0_REGNUM): Likewise.
(S390_TDB_ABORT_CODE_REGNUM): Likewise.
(S390_TDB_CONFLICT_TOKEN_REGNUM): Likewise.
(S390_TDB_ATIA_REGNUM): Likewise.
(S390_TDB_R0_REGNUM): Likewise.
(S390_TDB_R1_REGNUM): Likewise.
(S390_TDB_R2_REGNUM): Likewise.
(S390_TDB_R3_REGNUM): Likewise.
(S390_TDB_R4_REGNUM): Likewise.
(S390_TDB_R5_REGNUM): Likewise.
(S390_TDB_R6_REGNUM): Likewise.
(S390_TDB_R7_REGNUM): Likewise.
(S390_TDB_R8_REGNUM): Likewise.
(S390_TDB_R9_REGNUM): Likewise.
(S390_TDB_R10_REGNUM): Likewise.
(S390_TDB_R11_REGNUM): Likewise.
(S390_TDB_R12_REGNUM): Likewise.
(S390_TDB_R13_REGNUM): Likewise.
(S390_TDB_R14_REGNUM): Likewise.
(S390_TDB_R15_REGNUM): Likewise.
(S390_NUM_REGS): Increase.
(S390_IS_TDBREGSET_REGNUM): New macro.
(s390_regmap_tdb): Declare.
(s390_sizeof_tdbregset): Define.
(tdesc_s390_te_linux64): Declare.
(tdesc_s390x_te_linux64): Likewise.
* s390-tdep.c: Add includes for "auxv.h", <elf.h>,
"features/s390-te-linux64.c", and "features/s390x-te-linux64.c".
(s390_regmap_tdb): New regmap.
(s390_supply_tdb_regset): New function.
(s390_tdb_regset): New regset.
(s390_linux64v2_regset_sections): Add TDB regset to list.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Recognize TDB core note section.
(s390_core_read_description): If HWCAP indicates TE support,
select tdesc_s390_te_linux64 or tdesc_s390_s390x_te_linux64.
(s390_gdbarch_init): Handle TDB regset.
(_initialize_s390_tdep): Initialize new tdescs.
* s390-nat.c (HWCAP_S390_HIGH_GPRS): Remove define.
(have_regset_tdb): New variable.
(s390_native_supply): Support register invalidation.
(fetch_regset): Invalidate registers if ptrace yields ENODATA.
(check_regset): Treat ENODATA as "regset exists".
(s390_linux_fetch_inferior_registers): Add TDB.
(s390_read_description): Check for TDB existence and select
appropriate tdesc.
* gdbserver/Makefile.in (clean): Add removal of new makefile
targets.
(s390-te-linux64.c): New makefile target.
(s390x-te-linux64.c): Likewise.
* gdbserver/configure.srv (srv_regobj): Append new objects
s390-te-linux64.o and s390x-te-linux64.o.
(srv_xmlfiles): Append new files s390-te-linux64.xml,
s390x-te-linux64.xml, and s390-tdb.xml.
* gdbserver/linux-s390-low.c (init_registers_s390_te_linux64): New
declaration.
(tdesc_s390_te_linux64): Likewise.
(init_registers_s390x_te_linux64): Likewise.
(tdesc_s390x_te_linux64): Likewise.
(s390_check_regset): Treat ENODATA as "regset exists".
(s390_arch_setup): Add TDB regset support.
(initialize_low_arch): Initialize registers for new tdescs.

gdb/doc/ChangeLog:
2013-09-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

* gdb.texinfo (Decimal Floating Point format): Mention S/390.
(Standard Target Features): Add new node to menu.
(S/390 and System z Features): New node.

gdb/testsuite/ChangeLog:
2013-09-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

* gdb.arch/s390-tdbregs.c: New file.
* gdb.arch/s390-tdbregs.exp: New file.

2013-09-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

* s390-tdep.h (S390_IS_GREGSET_REGNUM): New macro.
(S390_IS_FPREGSET_REGNUM): New macro.
* s390-tdep.c (s390_dwarf_regmap): Make const.
(regnum_is_gpr_full): New function for replacing repeated code.
(s390_pseudo_register_name): Use it.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_unwind_pseudo_register): Likewise.
(s390_regmap_gregset): New format for regmap.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_supply_regset): Adjust to new regmap format.
(s390_collect_regset): Likewise.
* s390-nat.c (s390_native_supply): Adjust to new regmap format.
(s390_native_collect): Likewise.
(supply_gregset): Likewise.
(fill_gregset): Likewise.
(supply_fpregset): Likewise.
(fill_fpregset): Likewise.
(fetch_regset): Likewise.
(store_regset): Likewise.
(s390_linux_fetch_inferior_registers): Likewise.
(s390_linux_fetch_inferior_registers): Likewise.

doc,mi: example refers to -list-features instead of -list-target-features

Corrected mi documentation about -list-target-features, example now uses the
correct mi command.

2013-09-13  Sanimir Agovic  <sanimir.agovic@intel.com>

* gdb.texinfo (GDB/MI Miscellaneous Commands): Use
-list-target-features in the example.

daily update

* README: New file.

* gdb.python/py-events.py (new_objfile_handler): Remove accidentally
added code to print event.inferior.

2013-09-12  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

* gas/mips/bltzal.s: New file.
* gas/mips/bltzal.l: New file.
* gas/mips/mips.exp: Run the bltzal test.

2013-09-12  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

* config/tc-mips.c (match_insn): Set error when $31 is used for
bltzal* and bgezal*.

merge from gcc

* dwarf.c (dwarf_vmatoa): Rename to dwarf_vmatoa_1 and add a
precision parameter.
(dwarf_vmatoa): New wrapper for dwarf_vmatoa_1.
(print_dwarf_vma): Use dwarf_vmatoa_1.
(SAFE_BYTE_GET): Add check that VAL is big enough to contain
AMOUNT bytes.
(process_debug_info): Use an unsigned int for the offset size.
(process_debug_pubnames): Likewise.
(display_debug_aranges): Likewise.
(struct Frame_Chunk): Use dwarf_vma type for pc_begin and pc_range
fields.
(frame_display_row): Use print_dwarf_vma to display dwarf_vma
values.
(display_debug_frames): Likewise.

* binutils-all/x86-64/compressed-1a.d: Update expected output to
allow for 64-bit addresses.

* ld-elf/eh1.d: Update expected output to allow for
64-bit addresses.
* ld-elf/eh2.d: Likewise.
* ld-elf/eh3.d: Likewise.
* ld-elf/eh4.d: Likewise.
* ld-elf/eh5.d: Likewise.
* ld-elf/eh6.d: Likewise.
* ld-mips-elf/eh-frame1-n64.d: Likewise.
* ld-mips-elf/eh-frame2-n64.d: Likewise.
* ld-mips-elf/eh-frame3.d: Likewise.

* gas/cfi/cfi-alpha-1.d: Update expected output to allow for
64-bit addresses.
* gas/cfi/cfi-alpha-3.d: Likewise.
* gas/cfi/cfi-arm-1.d: Likewise.
* gas/cfi/cfi-common-1.d: Likewise.
* gas/cfi/cfi-common-2.d: Likewise.
* gas/cfi/cfi-common-3.d: Likewise.
* gas/cfi/cfi-common-4.d: Likewise.
* gas/cfi/cfi-common-5.d: Likewise.
* gas/cfi/cfi-common-6.d: Likewise.
* gas/cfi/cfi-common-7.d: Likewise.
* gas/cfi/cfi-hppa-1.d: Likewise.
* gas/cfi/cfi-i386-2.d: Likewise.
* gas/cfi/cfi-i386.d: Likewise.
* gas/cfi/cfi-m68k.d: Likewise.
* gas/cfi/cfi-mips-1.d: Likewise.
* gas/cfi/cfi-ppc-1.d: Likewise.
* gas/cfi/cfi-s390-1.d: Likewise.
* gas/cfi/cfi-s390x-1.d: Likewise.
* gas/cfi/cfi-sh-1.d: Likewise.
* gas/cfi/cfi-sparc-1.d: Likewise.
* gas/cfi/cfi-sparc64-1.d: Likewise.
* gas/cfi/cfi-x86_64.d: Likewise.

2013-09-12  Andrew Pinski  <apinski@cavium.com>

* aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Zero out regs.

daily update

minidebuginfo: Fix stripping/debuginfo

gdb/doc/
2013-09-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.texinfo (MiniDebugInfo): Prepare file debug and use it to create
mini_debuginfo.  Strip binary before adding mini_debuginfo to it.

gdb/testsuite/
2013-09-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.base/gnu-debugdata.exp (objcopy 1): Move it lower and use only
debug part of the binary.

minidebuginfo: ppc64 sync testcase->doc

gdb/doc/
2013-09-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

Sync documentation with gdb.base/gnu-debugdata.exp.
* gdb.texinfo (MiniDebugInfo): Add comment and "D" in the example.

minidebuginfo: Obvious changes

gdb/doc/
2013-09-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.texinfo (MiniDebugInfo): Fix two trailing dots.

gdb/testsuite/
2013-09-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.base/gnu-debugdata.exp (strip): Add -R .comment.
(addlink): Add comment.

daily update

merge from gcc

* dwarf.c (display_debug_frames): Check for DW64_CIE_ID when
parsing 64-bit frames.

merge from gcc

2013-09-10  Andreas Arnez  <arnez@linux.vnet.ibm.com>

* config/s390/s390.mh (NATDEPFILES): Add linux-waitpid.o.

test: adjust 'cd' regexpr to match an optional canonically pathname

New regexpr now correctly deals with trailing canonical pathname.

Before only the following output was matched:
(gdb) cd
Working directory /users/foo

In addition it now matches an optional trailing canonical pathname:
(gdb) cd
Working directory /users/foo
 (canonically /nfs/users/foo).

Triggered by `realpath .` != `pwd`

2013-09-10  Sanimir Agovic  <sanimir.agovic@intel.com>

testsuite/
* gdb.base/default.exp: Adjust regexpr for 'cd' to match optional
canonical pathname.

daily update

Remove use of deprecated_init_ui_hook from quit_confirm.

  https://sourceware.org/ml/gdb-patches/2013-09/msg00224.html

gdb/ChangeLog

        * top.c (quit_confirm): Remove use of deprecated_init_ui_hook.

daily update

daily update

daily update

remote-sim.c: Send debug output to gdb_stdlog.

Tested by building for --target=arm-eabi, and playing with the debug
output a bit.

gdb/
2013-09-06  Pedro Alves <palves@redhat.com>

* remote-sim.c (dump_mem, gdbsim_fetch_register)
(gdbsim_store_register, gdbsim_kill, gdbsim_load)
(gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume_inferior, gdbsim_wait)
(gdbsim_files_info, gdbsim_mourn_inferior): Send debug output to
gdb_stdlog.

remote-sim.c: Don't install a deprecated_xfer_memory method.

Manually tested with a --target=arm-eabi build, and doing things like:

$ arm-eabi-gcc ~/gdb/tests/main.c -o a.out -c -g
$ ./gdb a.out
...
(gdb) tar sim
(gdb) load
(gdb) disassemble 0
Dump of assembler code for function main:
   0x00000000 <+0>:     mov     r12, sp
   0x00000004 <+4>:     push    {r11, r12, lr, pc}
   0x00000008 <+8>:     sub     r11, r12, #4
   0x0000000c <+12>:    sub     sp, sp, #8
   0x00000010 <+16>:    str     r0, [r11, #-16]
   0x00000014 <+20>:    str     r1, [r11, #-20]
   0x00000018 <+24>:    mov     r3, #0
   0x0000001c <+28>:    mov     r0, r3
   0x00000020 <+32>:    sub     sp, r11, #12
   0x00000024 <+36>:    ldm     sp, {r11, sp, pc}
End of assembler dump.
(gdb) p *0 = 1
        0x00000001

gdb/
2013-09-06  Pedro Alves  <palves@redhat.com>

* remote-sim.c (dump_mem): Constify buf parameter.
gdbsim_xfer_inferior_memory): Rename to ...
(gdbsim_xfer_memory): ... this.  Adjust interface as
target_xfer_partial helper.
(gdbsim_xfer_partial): New function.
(init_gdbsim_ops): Don't install a deprecated_xfer_memory hook.
Install a to_xfer_partial hook.  Send output to gdb_stdlog.

remote-sim.c: cleanup debug output code.

Manually tested with a --target=arm-eabi build, and doing

$ arm-eabi-gcc ~/gdb/tests/main.c -o a.out -c -g
$ ./gdb a.out
...
(gdb) tar sim
(gdb) load
(gdb) set debug remote 1
(gdb) disassemble 0
Dump of assembler code for function main:
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x0, len 4, write 0
   0x00000000 <+0>:             0xe1a0c00d
mov     r12, sp
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x4, len 4, write 0
   0x00000004 <+4>:             0xe92dd800
push    {r11, r12, lr, pc}
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x8, len 4, write 0
   0x00000008 <+8>:             0xe24cb004
sub     r11, r12, #4
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0xc, len 4, write 0
   0x0000000c <+12>:            0xe24dd008
sub     sp, sp, #8
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x10, len 4, write 0
   0x00000010 <+16>:            0xe50b0010
str     r0, [r11, #-16]
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x14, len 4, write 0
   0x00000014 <+20>:            0xe50b1014
str     r1, [r11, #-20]
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x18, len 4, write 0
   0x00000018 <+24>:            0xe3a03000
mov     r3, #0
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x1c, len 4, write 0
   0x0000001c <+28>:            0xe1a00003
mov     r0, r3
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x20, len 4, write 0
   0x00000020 <+32>:            0xe24bd00c
sub     sp, r11, #12
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x24, len 4, write 0
   0x00000024 <+36>:            0xe89da800
ldm     sp, {r11, sp, pc}
End of assembler dump.
(gdb) p *0 = 1
gdbsim_xfer_inferior_memory: myaddr 0xc69bc0, memaddr 0x0, len 4, write 1
        0x00000001
$1 = 1

Which happens to differ from before, I think due to stdout line buffering:

(gdb) disassemble 0
Dump of assembler code for function main:
   0x00000000 <+0>:     gdbsim_xfer_inferior_memory: myaddr 0x0x7fffffffd400, memaddr 0x0, len 4, write 0
        0xe1a0c00d

But the new output looks reasonable to me, better even.

gdb/
2013-09-06  Pedro Alves  <palves@redhat.com>

* remote-sim.c (gdbsim_xfer_inferior_memory): Use
host_address_to_string, and send debug output to gdb_stdlog.

[gdbserver] Garbage collect unused dependency-tracking Makefile variables.

These used to be necessary for manual rule dependency tracking.
Nothing uses them anymore.  (regdat_sh is still needed.)

gdb/gdbserver/
2013-09-06  Pedro Alves  <palves@redhat.com>

* Makefile.in (gdb_proc_service_h, regdef_h, regcache_h)
(signals_def, signals_h, ptid_h, ax_h, agent_h, linux_btrace_h)
(linux_osdata_h, vec_h, gdb_vecs_h, host_defs_h, libiberty_h)
(server_h, gdbthread_h, linux_low_h, linux_ptrace_h)
(gdb_thread_db_h, linux_procfs_h, lynx_low_h, nto_low_h)
(mips_linux_watch_h, i386_low_h, win32_low_h): Delete.

[gdbserver] Update a couple Makefile rules.

These two are still written in the pre-auto-dependency-tracking style.
They probably were written before that, and committed afterwards
without adjustment.  An easy oversight to make.

gdb/gdbserver/
2013-09-06  Pedro Alves  <palves@redhat.com>

* Makefile.in (linux-btrace.o, mips-linux-watch.o): Remove
explicit header dependencies and use $COMPILE/$POSTCOMPILE.

[gdbserver] Fix IPA build.

Somehow, my builds yesterdays didn't trip on this...

../src/gdb/gdbserver/linux-amd64-ipa.c: In function ‘initialize_low_tracepoint’:
../src/gdb/gdbserver/linux-amd64-ipa.c:172:3: error: ‘ipa_tdesc’ undeclared (first use in this function)
../src/gdb/gdbserver/linux-amd64-ipa.c:172:3: note: each undeclared identifier is reported only once for each function it appears in

gdb/gdbserver/
2013-09-06  Pedro Alves  <palves@redhat.com>

* linux-amd64-ipa.c: Include tracepoint.h.
* linux-i386-ipa.c: Include tracepoint.h.

Extract Linux-specific portitions of cris-tdep.c to a new file.
This brings in some standard functionality hitherdo missing from
the CRIS/CRISv32 port thanks to the new call to gdbarch_init_osabi,
as well as clearly showing that there is Linux support for this
platform by virtue of the existence of a cris-linux-tdep.c file.

2013-09-06  Ricard Wanderlof  <ricardw@axis.com>

* Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
* configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
gdb_target_obs for cris target.
* cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
(cris_gdbarch_init): Move calls to
set_gdbarch_fetch_tls_load_module_address and
set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
Add call to gdbarch_init_osabi.
* cris-linux-tdep.c: New file.
* cris-tdep.h: New file.

OBVIOUS: Remove legacy comment referring to deprecated_init_ui_hook.

gdb/ChangeLog

* tui/tui-io.c (tui_initialize_io): Remove legacy comment referring
to deprecated_init_ui_hook.

Give every interpreter a command_loop_proc.

  https://sourceware.org/ml/gdb-patches/2013-09/msg00179.html

gdb/ChangeLog

        * cli/cli-interp.c (_initialize_cli_interp): Add a
        command_loop_proc to interp_procs.
        * event-top.c (cli_command_loop): Change signature to match
        interp_command_loop_ftype.
        * event-top.h (cli_command_loop): Same.
        * interps.c (interp_new): Require every interpreter to have a
        command_loop_proc.
        (current_interp_command_loop): Just call the command_loop_proc on
        the current interpreter.
        * tui/tui-interp.c (_initialize_tui_interp): Add a
        command_loop_proc to interp_procs.

Add support for threaded debugging for CRISv32.

2013-09-06  Ricard Wanderlof  <ricardw@axis.com>

* cris-tdep.c (cris_gdbarch_init): Add call to
get_gdbarch_fetch_tls_load_module_address.

gdbserver

* linux-crisv32-low.c (PTRACE_GET_THREAD_AREA): New macro.
(ps_get_thread_area): New function.

Fix filename format in previous ChangeLog entry.

I used the wrong format for the filenames in a previous changelog entry, I
incorrectly included the "gdb/" prefix.

Cosmetic clean up of names of *elf_greg_t types for CRIS/CRISv32.

2013-09-06  Ricard Wanderlof  <ricardw@axis.com>

* cris-tdep.c (cris_elf_greg_t): Rename from elf_greg_t.
(cris_elf_gregset_t): Rename from elf_gregset_t.
(crisv32_elf_gregset_t): Adjust.
(cris_supply_gregset, fetch_core_registers): Adjust.

Trivial patch to remove dependency on host unsigned long type
from cris-tdep.c.

2013-09-06  Ricard Wanderlof  <ricardw@axis.com>

* cris-tdep.c (elf_greg_t): Change typedef to unsigned char[4]

Fix compilation for target gdbserver on CRISv32 platform.

One misspelled function call, and one superfluous typedef. The latter
causes an error of the following type when building:

linux-crisv32-low.c:372: error: conflicting types for 'elf_gregset_t'
/.../target/include/asm/elf.h:36:
error: previous declaration of 'elf_gregset_t' was here

2013-09-06  Ricard Wanderlof  <ricardw@axis.com>

* linux-crisv32-low.c (elf_gregset_t): Delete typedef.
(initialize_low_arch): Call init_registers_crisv32 rather than
init_register_crisv32.

daily update

Add missing new files from these previous commits:

2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (handle_vFile, hostio_last_error_from_errno): Move
to ...
* hostio.h: ... this new file.
* hostio.c, server.c, linux-low.c, nto-low.c, spu-low,
win32-low.c: Include hostio.h.

2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (gdb_client_data, handler_func, callback_handler_func)
(delete_file_handler, add_file_handler, append_callback_event)
(delete_callback_event, start_event_loop, initialize_event_loop):
Move to event-loop.h and include it.
* event-loop.h: New file.

2013-09-05  Pedro Alves  <palves@redhat.com>

* dll.c, inferiors.c, remote-utils.c, server.c: Include "dll.h".
* server.h (struct dll_info, all_dlls, dlls_changed, clear_dlls)
(loaded_dll, unloaded_dll): Move to ...
* dll.h: ... this new file.
* inferiors.c, remote-utils.c, win32-low.c: Include "dll.h".

2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (current_process, get_thread_process, all_processes)
(add_inferior_to_list, for_each_inferior, current_inferior)
(remove_inferior, add_process, remove_process, find_process_pid)
(have_started_inferiors_p, have_attached_inferiors_p)
(thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id)
(clear_inferiors, find_inferior, find_inferior_id)
(inferior_target_data, set_inferior_target_data)
(inferior_regcache_data, set_inferior_regcache_data): Move to
inferiors.h, and include it.
* inferiors.h: New file.

2013-09-05  Pedro Alves  <palves@redhat.com>

* ax.c, linux-low.c, linux-x86-low.c, server.c: Include
tracepoint.h.
* server.h (IPA_BUFSIZ, initialize_tracepoint, tracing)
(disconnected_tracing, tracepoint_look_up_symbols, stop_tracing
(handle_tracepoint_general_set, handle_tracepoint_query)
(tracepoint_finished_step, tracepoint_was_hit)
(release_while_stepping_state_list, current_traceframe)
(in_readonly_region, traceframe_read_mem)
(fetch_traceframe_registers, traceframe_read_sdata)
(traceframe_read_info, struct fast_tpoint_collect_status)
(fast_tracepoint_collecting, force_unlock_trace_buffer)
(handle_tracepoit_bkpts, initialize_low_tracepoint)
(supply_fast_tracepoint_registers)
(supply_static_tracepoint_registers, set_trampoline_buffer_space)
(ipa_tdesc, claim_trampoline_space)
(have_fast_tracepoint_trampoline_buffer, gdb_agent_about_to_close)
(agent_mem_read, agent_get_trace_state_variable_value)
(agent_set_trace_state_variable_value, agent_tsv_read)
(agent_mem_read_string, get_raw_reg_func_addr)
(get_get_tsv_func_addr, get_set_tsv_func_addr): Move to ...
* tracepoint.h: ... this new file.

2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (perror_with_name, error, fatal, warning, paddress)
(pulongest, plongest, phex_nz, pfildes): Move to utils.h, and
include it.
* utils.h: New file.

2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (remote_debug, noack_mode, transport_is_reliable)
(gdb_connected, STDIO_CONNECTION_NAME, remote_connection_is_stdio)
(read_ptid, write_ptid, putpkt, putpkt_binary, putpkt_notif)
(getpkt, remote_prepare, remote_open, remote_close, write_ok)
(write_enn, initialize_async_io, enable_async_io)
(disable_async_io, check_remote_input_interrupt_request)
(convert_ascii_to_int, convert_int_to_ascii, new_thread_notify)
(dead_thread_notify, prepare_resume_reply)
(decode_address_to_semicolon, decode_address, decode_m_packet)
(decode_M_packet, decode_X_packet, decode_xfer_write)
(decode_search_memory_packet, unhexify, hexify)
(remote_escape_output, unpack_varlen_hex, clear_symbol_cache)
(look_up_one_symbol, relocate_instruction)
(monitor_output): Move to remote-utils.h, and include it.
* remote-utils.h: New file.

[gdbserver] Split a new hostio.h file out of server.h.

gdb/gdbserver/
2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (handle_vFile, hostio_last_error_from_errno): Move
to ...
* hostio.h: ... this new file.
* hostio.c, server.c, linux-low.c, nto-low.c, spu-low,
win32-low.c: Include hostio.h.

[gdbserver] Split a new event-loop.h file out of server.h.

gdb/gdbserver/
2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (gdb_client_data, handler_func, callback_handler_func)
(delete_file_handler, add_file_handler, append_callback_event)
(delete_callback_event, start_event_loop, initialize_event_loop):
Move to event-loop.h and include it.
* event-loop.h: New file.

[gdbserver] Split a new dll.h file out of server.h.

gdb/gdbserver/
2013-09-05  Pedro Alves  <palves@redhat.com>

* dll.c, inferiors.c, remote-utils.c, server.c: Include "dll.h".
* server.h (struct dll_info, all_dlls, dlls_changed, clear_dlls)
(loaded_dll, unloaded_dll): Move to ...
* dll.h: ... this new file.
* inferiors.c, remote-utils.c, win32-low.c: Include "dll.h".

[gdbserver] Split a new inferiors.h file out of server.h.

gdb/gdbserver/
2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (current_process, get_thread_process, all_processes)
(add_inferior_to_list, for_each_inferior, current_inferior)
(remove_inferior, add_process, remove_process, find_process_pid)
(have_started_inferiors_p, have_attached_inferiors_p)
(thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id)
(clear_inferiors, find_inferior, find_inferior_id)
(inferior_target_data, set_inferior_target_data)
(inferior_regcache_data, set_inferior_regcache_data): Move to
inferiors.h, and include it.
* inferiors.h: New file.

[gdbserver] Move bytecode compilation bits from server.h to ax.h.

gdb/gdbserver/
2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (struct emit_ops, current_insn_ptr, emit_error):
Move ...
        * ax.h: ... here.

[gdbserver] Split a new tracepoint.h file out of server.h.

gdb/gdbserver/
2013-09-05  Pedro Alves  <palves@redhat.com>

* ax.c, linux-low.c, linux-x86-low.c, server.c: Include
tracepoint.h.
* server.h (IPA_BUFSIZ, initialize_tracepoint, tracing)
(disconnected_tracing, tracepoint_look_up_symbols, stop_tracing
(handle_tracepoint_general_set, handle_tracepoint_query)
(tracepoint_finished_step, tracepoint_was_hit)
(release_while_stepping_state_list, current_traceframe)
(in_readonly_region, traceframe_read_mem)
(fetch_traceframe_registers, traceframe_read_sdata)
(traceframe_read_info, struct fast_tpoint_collect_status)
(fast_tracepoint_collecting, force_unlock_trace_buffer)
(handle_tracepoit_bkpts, initialize_low_tracepoint)
(supply_fast_tracepoint_registers)
(supply_static_tracepoint_registers, set_trampoline_buffer_space)
(ipa_tdesc, claim_trampoline_space)
(have_fast_tracepoint_trampoline_buffer, gdb_agent_about_to_close)
(agent_mem_read, agent_get_trace_state_variable_value)
(agent_set_trace_state_variable_value, agent_tsv_read)
(agent_mem_read_string, get_raw_reg_func_addr)
(get_get_tsv_func_addr, get_set_tsv_func_addr): Move to ...
* tracepoint.h: ... this new file.

[gdbserver] Split a new utils.h file out of server.h.

gdb/gdbserver/
2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (perror_with_name, error, fatal, warning, paddress)
(pulongest, plongest, phex_nz, pfildes): Move to utils.h, and
include it.
* utils.h: New file.

[gdbserver] Split a new remote-utils.h file out of server.h.

gdb/gdbserver/
2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (remote_debug, noack_mode, transport_is_reliable)
(gdb_connected, STDIO_CONNECTION_NAME, remote_connection_is_stdio)
(read_ptid, write_ptid, putpkt, putpkt_binary, putpkt_notif)
(getpkt, remote_prepare, remote_open, remote_close, write_ok)
(write_enn, initialize_async_io, enable_async_io)
(disable_async_io, check_remote_input_interrupt_request)
(convert_ascii_to_int, convert_int_to_ascii, new_thread_notify)
(dead_thread_notify, prepare_resume_reply)
(decode_address_to_semicolon, decode_address, decode_m_packet)
(decode_M_packet, decode_X_packet, decode_xfer_write)
(decode_search_memory_packet, unhexify, hexify)
(remote_escape_output, unpack_varlen_hex, clear_symbol_cache)
(look_up_one_symbol, relocate_instruction)
(monitor_output): Move to remote-utils.h, and include it.
* remote-utils.h: New file.

[gdbserver] Delete _ macro (gettext).

server.h nowadays includes gdb_locale.h, which already brings this in.

gdb/gdbserver/
2013-09-05  Pedro Alves  <palves@redhat.com>

* server.h (_): Delete.

Remove deprecated_command_loop_hook.

  https://sourceware.org/ml/gdb-patches/2013-09/msg00174.html

gdb/ChangeLog

        * gdb/defs.h (deprecated_command_loop_hook): Remove, including
        references in comments.
        * gdb/interps.c (current_interp_command_loop): No longer use
        deprecated_command_loop_hook.
        (clear_interpreter_hooks): Remove deprecated_command_loop_hook
        setup.
        * gdb/top.c (deprecated_command_loop_hook): Remove.

dwarf2loc.c: minor cleanup. don't print integer with paddress.

A couple years ago, dwarf_expr_fetch used to return a CORE_ADDR.  It
was made to return a ULONGEST since, and the 'dwarf_regnum' local
adjusted accordingly, but, we kept printing it with paddress.
gdbarch_dwarf2_reg_to_regnum takes the register number as 'int', so
there's really no point in using ULONGEST/pulongest either.

gdb/
2013-09-05  Pedro Alves  <palves@redhat.com>

* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
local is now int instead of ULONGEST.  Print it with %d
instead of paddress.

2013-09-05  Tristan Gingold  <gingold@adacore.com>

* MAINTAINERS: Remove avr maintainership.

Rework value_of_register in terms of value_of_register_lazy.

I noticed that value_of_register (used for getting values _of_
registers ($pc, $rax, etc.), rather than variables _in_ registers),
kind of builds a franken-value, by propagating the lval and address of
the frame register value, but not the entire location, like necessary
for lval_computed (if some unwinder ever returns that, the resulting
value will misbehave).  This gets in the way of printing optimized out
(not saved) lval_registers differently from other optimized out
values, as it doesn't make sure the resulting value is lval_register.

I started out by just doing something like:

-  VALUE_LVAL (reg_val) = lval;
-  set_value_address (reg_val, addr);
+  VALUE_LVAL (reg_val) = lval_register;

... just like value_of_register_lazy below.  That's sufficient to fix
the issue.

Then I noticed this is using frame_register, which we should avoid
nowadays, for it returns elements of a value, but not all that's
sometimes necessary (unavailable-ness is all or nothing with it, for
instance), and considered using get_frame_register_value instead
(which returns a struct value), and value_contents_copy, just like
value_fetch_lazy's handling of lval_register.  But at that point, I
realized we might as well just defer all that work to
value_of_register_lazy/value_fetch_lazy...

Doing it this way adds a frame_find_by_id lookup (from within
value_fetch_lazy), while we already have a frame pointer handy in
value_of_register.  I considered factoring out the lazy register
fetching out of value_fetch_lazy, into a function that takes a frame
pointer and call that instead, avoiding the lookup, but then it looked
like too much complication for an early optimization, and went back to
keeping it simple.

Tested on x86_64 Fedora 17.

gdb/
2013-09-05  Pedro Alves  <palves@redhat.com>

* findvar.c (value_of_register): Rework in terms of
value_of_register_lazy.

2013-09-05  Muhammad Bilal  <mbilal@codesourcery.com>

* symfile.c (add_symbol_file_command): Remove trailing
 whitespaces and blank line after comment.