Sujith Manoharan [Wed, 22 Feb 2012 07:11:01 +0000 (12:41 +0530)]
ath9k_hw: Handle MCI power state using a helper
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:55 +0000 (12:40 +0530)]
ath9k_hw: Use a helper function to get MCI ISR
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:49 +0000 (12:40 +0530)]
ath9k: Initialize BTCOEX scheme using a helper
Setting up the required scheme can be done as part of the
BTCOEX initialization path and it doesn't belong in
ath9k_hw_fill_cap_info() anyway.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:44 +0000 (12:40 +0530)]
ath9k: Use CONFIG_ATH9K_BTCOEX_SUPPORT
This patch uses CONFIG_ATH9K_BTCOEX_SUPPORT to conditionally
compile btcoex-related code in the driver core.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:38 +0000 (12:40 +0530)]
ath9k: Calculate ampdu limit using a helper
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:32 +0000 (12:40 +0530)]
ath9k: Process BTCOEX interrupts using a helper
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:27 +0000 (12:40 +0530)]
ath9k: Use proper start/stop routines for BTCOEX
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:21 +0000 (12:40 +0530)]
ath9k: Move BTCOEX init/deinit functions to gpio.c
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:15 +0000 (12:40 +0530)]
ath9k: Initialize MCI params using a helper
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:09 +0000 (12:40 +0530)]
ath9k: Cleanup MCI init/deinit routines
This patch simplifies the buffer allocation functions
for MCI and removes unneeded memset calls. Also, a couple
of unused variables are removed and a memory leak in DMA
allocation is fixed.
[ 1263.788267] WARNING: at /home/sujith/dev/wireless-testing/lib/dma-debug.c:875 check_unmap+0x173/0x7e0()
[ 1263.788273] ath9k 0000:06:00.0: DMA-API: device driver frees DMA memory with different size
[device address=0x0000000071908000] [map size=512 bytes] [unmap size=256 bytes]
[ 1263.788345] Pid: 774, comm: rmmod Tainted: G W O 3.3.0-rc3-wl #18
[ 1263.788348] Call Trace:
[ 1263.788355] [<
ffffffff8105110f>] warn_slowpath_common+0x7f/0xc0
[ 1263.788359] [<
ffffffff81051206>] warn_slowpath_fmt+0x46/0x50
[ 1263.788363] [<
ffffffff8125a713>] check_unmap+0x173/0x7e0
[ 1263.788368] [<
ffffffff8123fc22>] ? prio_tree_left+0x32/0xc0
[ 1263.788373] [<
ffffffff8125aded>] debug_dma_free_coherent+0x6d/0x80
[ 1263.788381] [<
ffffffffa0701c3c>] ath_mci_cleanup+0x7c/0x110 [ath9k]
[ 1263.788387] [<
ffffffffa06f4033>] ath9k_deinit_softc+0x113/0x120 [ath9k]
[ 1263.788392] [<
ffffffffa06f55cc>] ath9k_deinit_device+0x5c/0x70 [ath9k]
[ 1263.788397] [<
ffffffffa0704934>] ath_pci_remove+0x54/0xa0 [ath9k]
[ 1263.788401] [<
ffffffff81267d06>] pci_device_remove+0x46/0x110
[ 1263.788406] [<
ffffffff813102bc>] __device_release_driver+0x7c/0xe0
[ 1263.788410] [<
ffffffff81310a00>] driver_detach+0xd0/0xe0
[ 1263.788414] [<
ffffffff81310118>] bus_remove_driver+0x88/0xe0
[ 1263.788418] [<
ffffffff813111c2>] driver_unregister+0x62/0xa0
[ 1263.788421] [<
ffffffff812680c4>] pci_unregister_driver+0x44/0xc0
[ 1263.788427] [<
ffffffffa0705015>] ath_pci_exit+0x15/0x20 [ath9k]
[ 1263.788432] [<
ffffffffa070a92d>] ath9k_exit+0x15/0x31 [ath9k]
[ 1263.788436] [<
ffffffff810b971c>] sys_delete_module+0x18c/0x270
[ 1263.788441] [<
ffffffff81436edd>] ? retint_swapgs+0x13/0x1b
[ 1263.788446] [<
ffffffff812483be>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 1263.788450] [<
ffffffff814378e9>] system_call_fastpath+0x16/0x1b
[ 1263.788453] ---[ end trace
3ab4d030ffde40d4 ]---
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Wed, 22 Feb 2012 07:10:03 +0000 (12:40 +0530)]
ath9k: Remove AR9462 v1.0 support
v1.0 chips are not available in the market.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 20 Feb 2012 13:19:58 +0000 (14:19 +0100)]
mac80211: fix associated vs. idle race
Eliad reports that if a scan finishes in the
middle of processing associated (however it
happens), the interface can go idle. This is
because we set assoc_data to NULL before we
set associated. Change the order so any idle
check will find either one of them.
Doing this requires duplicating the TX sync
processing, but I already have a patch to
delete that completely and will submit that
as soon as my driver changes to no longer
require it are submitted.
Reported-by: Eliad Peller <eliad@wizery.com>
Tested-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 20 Feb 2012 10:38:41 +0000 (11:38 +0100)]
mac80211: clean up asm/unaligned.h inclusion
Some files implicitly get this via mesh.h
which itself doesn't need it, so move the
inclusion into the right files. Some other
files don't need it at all but include it,
so remove it from there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Eliad Peller [Sun, 19 Feb 2012 13:26:10 +0000 (15:26 +0200)]
mac80211: remove redundant monitor_work enqueueing
ieee80211_restart_sta_timer() takes care for enqueueing
monitor_work if needed, so no need to do it again.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Eliad Peller [Sun, 19 Feb 2012 13:26:09 +0000 (15:26 +0200)]
mac80211: don't queue monitor work for HW_CONNECTION_MONITOR
Devices that monitor the connection in the hw don't need
the monitor work in the driver.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Masanari Iida [Fri, 17 Feb 2012 14:04:10 +0000 (23:04 +0900)]
wireless: Fix typo in mac80211_hwsim.c
Correct spelling "occured" to "occurred" in
drivers/net/wireless/mac80211_hwsim.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John Li [Fri, 17 Feb 2012 09:33:06 +0000 (17:33 +0800)]
rt2x00:Add RT5372 chipset support
Signed-off-by: John Li <chen-yang.li@mediatek.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Fri, 17 Feb 2012 03:14:45 +0000 (22:14 -0500)]
ath9k: avoid useless cast from (struct ath_rateset *) to (u8 *) and back
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 16 Feb 2012 18:14:36 +0000 (12:14 -0600)]
rtlwifi: Fix breakage in debug functions when built as a module
Since commit
481b9606, it has not been possible to invoke debugging
with any rtlwifi driver built as a module.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John Li [Thu, 16 Feb 2012 13:40:57 +0000 (21:40 +0800)]
rt2x00:Add VCO recalibration
Signed-off-by: John Li <chen-yang.li@mediatek.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Thu, 16 Feb 2012 06:23:00 +0000 (11:53 +0530)]
ath9k: Fix descriptor length for AR9462
Change the descriptor length to 24 and explicitly
set the control field 23 to zero. Not doing so would
result in dropping of frames.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Thu, 16 Feb 2012 06:22:50 +0000 (11:52 +0530)]
ath9k: Fix programming SYNTH4 for AR9462
The LONG_SHIFT_SELECT offset is different for AR9462 from
the other chip families. Fix this.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Thu, 16 Feb 2012 06:22:44 +0000 (11:52 +0530)]
ath9k: Initialize NF values properly
Using AR_SREV_* macros for setting up the chip-specific NF
values will make adding support for new chips hard. Use separate
macros for each chip. Currently, AR9462 has the same value for
all NF limits.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Thu, 16 Feb 2012 06:22:35 +0000 (11:52 +0530)]
ath9k: Remove unused initvals
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Thu, 16 Feb 2012 06:22:25 +0000 (11:52 +0530)]
ath9k: Fix phyerr debug statistics
Validate the phyerr value against the max. size of the
statistics array properly.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Thu, 16 Feb 2012 06:21:23 +0000 (11:51 +0530)]
ath9k: Prettify recv debugfs file output
Dumping the RSSI information in the middle of error
statistics is a bit misleading. Move them to the end.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Thu, 16 Feb 2012 06:21:11 +0000 (11:51 +0530)]
ath9k: Add a debugfs file to display reset statistics
Location: <debugfs_path>/ieee80211/phy#/ath9k/reset
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Thu, 16 Feb 2012 06:21:02 +0000 (11:51 +0530)]
ath9k: Merge wiphy and misc debugfs files
This patch merges the 'wiphy' and 'misc' debugfs files
and consolidates the information.
Information about the current channel and other HT parameters
can be obtained from both mac80211 and iw. Remove such
redundant data.
The reset statistics have been removed, they will be re-added in
a subsequent patch (in a new debugfs file).
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Thu, 16 Feb 2012 06:20:55 +0000 (11:50 +0530)]
ath9k: Remove unnecessary variable initialization
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Wed, 15 Feb 2012 20:53:16 +0000 (21:53 +0100)]
ath9k_hw: remove duplicate initvals
Comparing SHA1 checksums of the initval tables has shown that there are many
tables that are 100% identical.
iniBank{0,1,2,3,7} and iniBB_RfGain are shared by AR5416, AR913x, AR9160
iniBank6 is shared between AR5416 and AR9160
iniBank6TPC is shared between AR913x and AR9160
iniPcieSerdes is the same for all AR9002 based devices
The CCK FIR coefficients are shared between AR9271 and AR9287
Getting rid of those duplicates saves about 7.5k uncompressed (on MIPS).
For AR9003 and later there are some duplicates as well, but I've decided to
leave them in for now, as the initvals for those chips are still actively
maintained by QCA.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Sat, 11 Feb 2012 20:58:09 +0000 (21:58 +0100)]
rt2x00: Add support for D-Link DWA-127 to rt2800usb.
This is an RT3070 based device.
Cc: <stable@vger.kernel.org>
Reported-by: Mikhail Kryshen <mikhail@kryshen.net>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Mon, 27 Feb 2012 18:30:45 +0000 (13:30 -0500)]
Merge branch 'wireless-next' of git://git./linux/kernel/git/iwlwifi/iwlwifi
Mohammed Shafi Shajakhan [Tue, 14 Feb 2012 13:09:19 +0000 (18:39 +0530)]
ath9k: remove unnecessary PS wrappers
ath_set_channel is called from ath9k_config which already has proper
PS wrappers
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohammed Shafi Shajakhan [Tue, 14 Feb 2012 13:09:18 +0000 (18:39 +0530)]
ath9k: remove obsolete comments
the corresponding code/logic was removed in
"ath9k: rework power state handling"
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jonathan Bither [Tue, 14 Feb 2012 02:47:45 +0000 (21:47 -0500)]
ath5k:Remove __raw_read and __raw_write
By swithing from our __raw_read and __raw_write functions to ioread32 and iowrite32,
benchmarks on my desk with iperf went from 11MBps to 18.1MBps using the AHB bus
on an EnGenius ECB3500 running OpenWRT.
Signed-off-by: Jonathan Bither <jonbither@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 13 Feb 2012 14:17:18 +0000 (15:17 +0100)]
cfg80211: restructure AP/GO mode API
The AP/GO mode API isn't very clearly defined, it
has "set beacon" and "new beacon" etc.
Modify the API to the following:
* start AP -- all settings
* change beacon -- new beacon data
* stop AP -- stop AP mode operation
This also reflects in the nl80211 API, rename
the commands there correspondingly (but keep
the old names for compatibility.)
Overall, this makes it much clearer what's going
on in the API.
Kalle developed the ath6kl changes, I created
the rest of the patch.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:31 +0000 (11:23 +0100)]
iwlegacy: remove il_is_rfkill_hw
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:30 +0000 (11:23 +0100)]
iwlegacy: s/il_txq_mem/il_free_txq_mem/g
Previous name was confusing.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:29 +0000 (11:23 +0100)]
iwlegacy: s/S_RF_KILL_HW/S_RFKILL/g
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:28 +0000 (11:23 +0100)]
iwlegacy: small queue initializations cleanup
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Tue, 14 Feb 2012 07:50:42 +0000 (08:50 +0100)]
iwlegacy: enable only rfkill interrupt when rfkill switch is on during IFF_UP
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:26 +0000 (11:23 +0100)]
iwlegacy: small il4965_set_hw_ready cleanup
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:25 +0000 (11:23 +0100)]
iwlegacy: check correct il_poll_bit error value
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:24 +0000 (11:23 +0100)]
iwlegacy: do not grab nic access if rfkill
If rfkill is on il_grab_nic_access() fail and we can not write to the
various registers during stop procedure. Write to those registers
unconditionally instead.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:23 +0000 (11:23 +0100)]
iwleagcy: fix ident code damage
Using ident is not always good.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:22 +0000 (11:23 +0100)]
iwleagcy: remove old comments
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:21 +0000 (11:23 +0100)]
iwlegacy: improve mac operation debuggability a bit
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:20 +0000 (11:23 +0100)]
iwlegacy: get rid of tx/rx traffic log
The same data can be gathered using monitor mode.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:19 +0000 (11:23 +0100)]
iwlegacy: merge all ops structures into one
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:18 +0000 (11:23 +0100)]
iwlegacy: merge il_lib_ops into il_ops
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:17 +0000 (11:23 +0100)]
iwlegacy: remove il_apm_ops
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:16 +0000 (11:23 +0100)]
iwlegacy: merge eeprom_ops into lib_ops
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:15 +0000 (11:23 +0100)]
iwlegacy: remove temp_ops
Remove unneeded structure and cleanup temperature calibration routines
a bit.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:14 +0000 (11:23 +0100)]
iwlegacy: move debugfs_ops to il_priv
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:13 +0000 (11:23 +0100)]
iwlegacy: gather all 4965 handlers in one place
Handers belongs logically into 4965-mac.c file.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:12 +0000 (11:23 +0100)]
iwlegacy: regulatory_bands is not an ops
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:11 +0000 (11:23 +0100)]
iwlegacy: use writeb,writel,readl directly
That change will save us some CPU cycles at run time. Having
port-based I/O seems to be not possible for PCIe devices.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:10 +0000 (11:23 +0100)]
iwlegacy: cleanup/fix memory barriers
wmb(), rmb() are not needed when writel(), readl() are used as
accessors for MMIO. We use them indirectly via iowrite32(),
ioread32().
What is needed mmiowb(), for synchronizing writes coming from
different CPUs on PCIe bridge (see in patch comments). This
fortunately is not needed on x86, where mmiowb() is just
defined as compiler barrier. As iwlegacy devices are most likely
not used on anything other than x86, this is not so important
fix.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:09 +0000 (11:23 +0100)]
iwlegacy: always check if got h/w access before write
Before we write to the device register always check if
_il_grap_nic_access() was successful.
Change type return type _il_grap_nic_access() to bool, and
add likely()/unlikely() statements.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Mon, 13 Feb 2012 10:23:08 +0000 (11:23 +0100)]
iwlegacy: dump stack when fail to gain access to the device
Print dump stack when the device is not responding. This should give
some more clue about the reason of failure. Also change the message we
print, since "MAC in deep sleep" is kinda confusing.
On the way add unlikely(), as fail to gain NIC access is hmm ...
unlikely.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tim Gardner [Fri, 10 Feb 2012 00:19:52 +0000 (18:19 -0600)]
rtlwifi: rtl8192se firmware load can overflow target buffer
Define RTL8190_MAX_RAW_FIRMWARE_CODE_SIZE which represents the
maximimum possible firmware file size. Use it in the definition
of the buffer which receives the firmware file data.
Set RTL8190_MAX_RAW_FIRMWARE_CODE_SIZE closer to the actual size of
the firmware file, e.g., 90000 (down from hard coded 164000). The current
size of rtlwifi/rtl8192sefw.bin is 88856.
Set max_fw_size to RTL8190_MAX_RAW_FIRMWARE_CODE_SIZE for the size limit
check. Fix the error case where max_fw_size is not cleared if the size
limit check fails.
Cc: Chaoming Li <chaoming_li@realsil.com.cn>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:09:09 +0000 (21:09 +0100)]
brcm80211: fmac: make sdio firmware filename specific
The sdio driver part uses firmware name brcmfmac.bin. With addition
of usb this name is too generic. This patch renames the filename
to brcmfmac-sdio.bin.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:09:08 +0000 (21:09 +0100)]
brcm80211: fmac: add USB support for bcm43235/6/8 chipsets
This patch extends the use of the brcmfmac driver with support for
chipsets with a USB host interface. The first chipsets supported are
the bcm43235, bcm43236, and bcm43238 for which firmware has been
submitted.
This driver change has been successfully built for x86, x86_64,
ppc64, arm_le, and mips_be.
It has been tested successfully on x86 and x86_64.
Cc: M. Lambert <lambertm@westman.wave.ca>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Kan Yan <kanyan@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:09:07 +0000 (21:09 +0100)]
brcm80211: fmac: use spinlock calls saving irq flags in brcmf_enq_event()
This function is executed within irq context. The call spin_unlock_irq
does enable interrupts which is not desired in the irq context. This patch
replaces them using the spin_loc_irqsave and spin_unlock_irqrestore
functions.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Kan Yan <kanyan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:09:06 +0000 (21:09 +0100)]
brcm80211: fmac: change allocation flag in brcmf_enq_event() function
As the function is called from atomic context it should not do the
kzalloc call with GFP_KERNEL.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Kan Yan <kanyan@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:09:05 +0000 (21:09 +0100)]
brcm80211: fmac: update bus state in common driver part
The bus state is updated in the sdio bus init function, but it is
better to do it when the brcmf_bus_start() function is completed
successfully. The brcmf_netdev_open() function will return -EAGAIN
until the state is updated instead of calling brcmf_bus_start() to
avoid reentering that function.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:09:04 +0000 (21:09 +0100)]
brcm80211: fmac: only return success in brcmf_sdbrcm_bus_init() when true
The function brcmf_sdbrcm_bus_init() always returned success except for
firmware download failure. However, also when enabling SDIO function 2
is failing the function should return failure. This patch fixes that.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:09:03 +0000 (21:09 +0100)]
brcm80211: fmac: move module entry points to dhd_linux.c
The module_init/exit functions are moved to dhd_linux.c to prepare
for supporting multiple host interface types.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:09:02 +0000 (21:09 +0100)]
brcm80211: fmac: use specific types in struct brcmf_bus
The fields bus_priv and drvr are defined as void pointer. It is
preferred to have specific types for compiler type checking. To
prepare for other bus types the bus_priv field is defined as a
union containing the sdio bus private structure reference.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Thu, 9 Feb 2012 20:09:01 +0000 (21:09 +0100)]
brcm80211: fmac: make sure cancel_work_sync only called after INIT_WORK
INIT_WORK only gets called after brcmf_proto_attach returns
success. This dependency should be annotated in brcmf_detach to
avoid any error.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:09:00 +0000 (21:09 +0100)]
brcm80211: fmac: resolve smatch issues in brcmfmac code
This patch resolves the following smatch issues:
wl_cfg80211.c +1377 brcmf_cfg80211_connect(65) warn: min_t truncates
here '(sme->ssid_len)' (
4294967295 vs
9223372036854775807)
dhd_sdio.c +1275 brcmf_sdbrcm_rxglom(156) warn: min_t truncates here
'(pfirst->len)' (
2147483647 vs
4294967295)
dhd_sdio.c +1457 brcmf_sdbrcm_rxglom(338) warn: min_t truncates here
'(pfirst->len)' (
2147483647 vs
4294967295)
bcmsdh_sdmmc.c +300 brcmf_sdioh_request_buffer(10) warn: variable
dereferenced before check 'pkt' (see line 295)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:08:59 +0000 (21:08 +0100)]
brcm80211: smac: remove smatch warnings from brcmsmac code
The patch fixes following smatch warnings:
main.c +2902 brcms_b_read_objmem(11) info: ignoring unreachable code.
mac80211_if.c +1146 brcms_suspend(8) error: we previously assumed 'wl'
could be null (see line 1145)
srom.c +641 _initvars_srom_pci(16) error: potential null dereference
'entry'. (kzalloc returns null)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:08:58 +0000 (21:08 +0100)]
brcm80211: smac: fix endless retry of A-MPDU transmissions
The A-MPDU code checked against a retry limit, but it was using
the wrong variable to do so. This patch fixes this to assure
proper retry mechanism.
This problem had a side-effect causing the mac80211 flush callback
to remain waiting forever as well. That side effect has been fixed
by commit by Stanislaw Gruszka:
commit
f96b08a7e6f69c0f0a576554df3df5b1b519c479
Date: Tue Jan 17 12:38:50 2012 +0100
brcmsmac: fix tx queue flush infinite loop
Reference:
https://bugzilla.kernel.org/show_bug.cgi?id=42576
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:08:57 +0000 (21:08 +0100)]
brcm80211: smac: remove redundant assignments from txpwrctrl_pwr_setup_nphy
The function wlc_phy_txpwrctrl_pwr_setup_nphy() does assign a local
variable target_pwr_qtrdbm in several code paths, but in the end all
code paths are coming to an assignment of that variable which does
override all previous. So those early and redundant assignments have
been removed.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:08:56 +0000 (21:08 +0100)]
brcm80211: smac: fix unintended fallthru in wlc_phy_radio_init_2057()
The radio initialization for 2057 rev 5 was using the incorrect
register table for the initialization. This patch fixes that.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Thu, 9 Feb 2012 20:08:55 +0000 (21:08 +0100)]
brcm80211: update the maintainers listed for brcm80211 drivers
Henry Ptasinski is not working on the brcm80211 driver so taking
his name/email out of the MAINTAINERS file.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tristan Pourcelot [Thu, 9 Feb 2012 13:48:09 +0000 (14:48 +0100)]
Correcting typos in rtlwifi/base.c
This patch correct some typos in a comment.
Signed-off-by: Tristan Pourcelot <tristan.pourcelot@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 9 Feb 2012 02:56:52 +0000 (20:56 -0600)]
rtlwifi: rtl8192c-common: rtl8192se: rtl8192de: Simplify if statements
Devendra Naga <devendra.aaru@gmail.com> submitted a patch for rtl8192c_common
to change the tests in _rtl92c_store_pwrIndex_diffrate_offset(). This patch
improves on those changes and applies similar modifications to drivers rtl8192se
and rtl8192de.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John Li [Wed, 8 Feb 2012 13:25:24 +0000 (21:25 +0800)]
rt2x00:Add debug message for new chipset
Signed-off-by: John Li <chen-yang.li@mediatek.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John Li [Wed, 8 Feb 2012 13:19:01 +0000 (21:19 +0800)]
rt2x00:Fix typo
Signed-off-by: John Li <chen-yang.li@mediatek.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Devendra.Naga [Tue, 31 Jan 2012 07:11:03 +0000 (02:11 -0500)]
rtlwifi/rtl8192c: in _rtl92c_phy_calculate_bit_shift remove comparing bitmask against 1
in _rtl92c_phy_calculate_bit_shift everytime the right shifted bitmask
is AND with 1 and compared against 1. i.e.
if ((bitmask >> i) & 0x1 == 1)
break;
which in the if condition is anyway becomes a 1 or 0.
Signed-off-by: Devendra.Naga <devendra.aaru@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Wed, 22 Feb 2012 19:44:50 +0000 (14:44 -0500)]
Merge branch 'for-linville' of git://git./linux/kernel/git/luca/wl12xx
Meenakshi Venkataraman [Wed, 8 Feb 2012 20:04:41 +0000 (12:04 -0800)]
iwlwifi: enable receiving beacons when not associated
If the firmware implements beacon filtering,
beacons are filtered when not associated. This causes
association failures on channels marked passive.
Enabling this flag indicates to the firmware to allow
the beacons to pass through when not associated only.
Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Wed, 8 Feb 2012 23:57:39 +0000 (15:57 -0800)]
iwlwifi: remove un-necessary return
Already return 0, change to void
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Tue, 7 Feb 2012 10:56:26 +0000 (12:56 +0200)]
iwlwifi: SRAM size moves from hw_params to cfg
This will allow to set the hw_params after we fetch the uCode.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Don Fry [Tue, 7 Feb 2012 01:06:07 +0000 (17:06 -0800)]
iwlwifi: save ucode capabilities in iwl_fw
The capabilities parsed from the ucode file are never saved. Save
them in the iwl_fw structure.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Don Fry [Tue, 7 Feb 2012 22:21:32 +0000 (14:21 -0800)]
iwlwifi: changes args to iwl_nic for firmware operations
Remove the references to iwl_priv from the firmware request and
parsing routines. They are generic to the nic.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Mon, 6 Feb 2012 12:30:54 +0000 (14:30 +0200)]
iwlwifi: the transport knows its state
This allows to handle races such as Tx packets on their way to be
sent although the transport has been stopped already.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Don Fry [Tue, 7 Feb 2012 22:03:55 +0000 (14:03 -0800)]
iwlwifi: move event and err pointers to iwl_nic
Move the ucode offset pointers to the iwl_nic as they are nic related.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Mon, 6 Feb 2012 14:41:58 +0000 (16:41 +0200)]
iwlwifi: document the transport layer
Fix a few typos in the existing comments too.
Enforce the comments with might_sleep.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Amit Beka [Wed, 8 Feb 2012 08:01:35 +0000 (10:01 +0200)]
iwlwifi: send testmode hcmd reply with rx header
When a host command is sent through testmode, the whole
reply (including rx header) is returned to the user, and not
only the payload of the rx.
Before this commit the length was buggy - the reply contained 4 bytes
after the end of the payload.
Signed-off-by: Amit Beka <amit.beka@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Amit Beka [Sun, 5 Feb 2012 22:40:47 +0000 (00:40 +0200)]
iwlwifi: fixes to testmode indirect access
Fixed casting of buffer addressing, and added size to
the read method, like in __iwl_read_prph.
Signed-off-by: Amit Beka <amit.beka@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Tue, 7 Feb 2012 08:55:46 +0000 (10:55 +0200)]
iwlwifi: use enhance_sensitivity from iwl_fw
Remove another dependency between the nic layer and the iwl_priv
struct.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Fri, 17 Feb 2012 18:52:03 +0000 (10:52 -0800)]
iwlwifi: iwl_set_hw_params returns always 0
Remove the return value.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Fri, 17 Feb 2012 18:34:53 +0000 (10:34 -0800)]
iwlwifi: kill iwl_down and s/__iwl_down/iwl_down
iwl_down was just a wrapper around __iwl_down which was called from
one place only. Replace it to direct call to iwl_down. Add lockdep
warning in iwl_down to ensure it was called with the mutex held.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Don Fry [Tue, 7 Feb 2012 00:37:46 +0000 (16:37 -0800)]
iwlwifi: change args to ucode routines
Change the prameters to the ucode (de)allocate routines to iwl_nic as
they are not transport operations.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Don Fry [Tue, 7 Feb 2012 23:00:12 +0000 (15:00 -0800)]
iwlwifi: Move ucode pointers to iwl_fw
The ucode image is a ucode related thing not a transport one. Move them.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Don Fry [Tue, 7 Feb 2012 00:00:14 +0000 (16:00 -0800)]
iwlwifi: move firmware_loading_complete to iwl_nic
Move firmware_loading_complete from iwl_priv to iwl_nic and rename it
to more accurately reflect what it does.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Don Fry [Mon, 6 Feb 2012 23:57:40 +0000 (15:57 -0800)]
iwlwifi: move firmware_name to iwl_nic
Delete firmware_name from iwl_priv and use iwl_nic instead.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Don Fry [Mon, 6 Feb 2012 23:54:31 +0000 (15:54 -0800)]
iwlwifi: move fw_index from iwl_priv to iwl_nic
Delete fw_index from iwl_priv and use iwl_nic instead.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
projects / platform / kernel / linux-rpi.git / log