Robert Marko [Fri, 23 Oct 2020 08:52:38 +0000 (14:22 +0530)]
mtd: spi-nor-ids: Add SECT_4K to mx25l12805d
According to the mx25l12805d datasheet it supports using 4K or 64K sectors.
So lets add the SECT_4K to enable 4K sector usage.
Datasheet: https://www.mxic.com.tw/Lists/Datasheet/Attachments/7321/MX25L12805D,%203V,%20128Mb,%20v1.2.pdf
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Biju Das [Tue, 29 Sep 2020 10:04:02 +0000 (11:04 +0100)]
mtd: spi-nor-ids: Add Winbond W25M512JW flash entry
Add Winbond W25M512JW flash device description.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Lad Prabhakar [Thu, 17 Sep 2020 14:50:30 +0000 (15:50 +0100)]
mtd: spi-nor-ids: Add Winbond W25M512JV flash entry
Add Winbond W25M512JV flash device description.
Linux already has the flash entry present. A snippet below:
{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024...},
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Patrick Delaunay [Thu, 15 Oct 2020 15:18:17 +0000 (17:18 +0200)]
spi: migrate trace to dev and log macro in spi uclass
Define LOG_CATEGORY and change printf and pr_*
to dev_ (when dev is available) or log_ macro.
This patch adds the support of logging feature with log command
(filtering, display of device name in trace) and allows to
suppress traces via the syslog driver.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Fri, 23 Oct 2020 08:32:48 +0000 (14:02 +0530)]
dh_imx6: Switch to full DM-aware
Enable DM_SPI/DM_SPI_FLASH with a related config option.
Build fine, but not tested.
Cc: Ludwig Zenz <lzenz@dh-electronics.de>
Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Fri, 23 Oct 2020 08:26:49 +0000 (13:56 +0530)]
cm_fx6: Switch to full DM-aware
Enable DM_SPI/DM_SPI_FLASH with a related config option.
Build fine, but not tested.
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Fri, 23 Oct 2020 08:21:01 +0000 (13:51 +0530)]
cl-som-imx7: Switch to DM_SPI/DM_SPI_FLASH
Enable DM_SPI/DM_SPI_FLASH with associated config
options.
Build fine, but not tested.
Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tom Rini [Wed, 16 Dec 2020 15:58:24 +0000 (10:58 -0500)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 16 Dec 2020 13:13:37 +0000 (08:13 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Update cmdline parameter to be an env var in zimage boot
- Various minor fixes for Intel Edison board
Andy Shevchenko [Thu, 3 Dec 2020 17:45:02 +0000 (19:45 +0200)]
x86: edison: Switch to DM_USB_GADGET
DM is the modern default approach for the drivers in U-Boot.
It also allows to configure code via Device Tree.
Move Intel Edison to use DM_USB_GADGET and drop hard coded values.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Thu, 3 Dec 2020 17:45:01 +0000 (19:45 +0200)]
x86: edison: Use dwc3-generic driver for Intel Edison
Use generic Synopsys DesignWare 3 driver on Intel Edison.
For now it's just a stub which allows future refactoring.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Thu, 3 Dec 2020 15:40:11 +0000 (17:40 +0200)]
x86: edison: BINMAN selection is specific to the board
The platforms based on Intel Tangier may have different requirements
how to create bootloader bundle to supply to a device. Currently
the BINMAN approach is for Intel Edison only.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Wed, 2 Dec 2020 10:35:32 +0000 (12:35 +0200)]
x86: edison: Add CPU to compatible string
Like in the rest of x86 boards append CPU to the board compatible string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Fri, 27 Nov 2020 12:41:16 +0000 (14:41 +0200)]
x86: edison: Drop unneeded DM_PCI_COMPAT
None of the driver for Edison is using DM_PCI_COMPAT, hence drop it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Fri, 27 Nov 2020 12:40:48 +0000 (14:40 +0200)]
x86: tangier: Find proper memory region for relocation
It appears that U-Boot works by luck on Intel Edison board because the amount
of RAM is less than 1 GB and standard way of calculating the top of it work
for this configuration. However, this won't work if the amount of RAM is
different and split differently in address space. We have to find the suitable
window correctly.
Find proper memory region for relocation by scanning MMAP SFI table in
board_get_usable_ram_top() callback.
According to the address map documentation the Main Memory is guaranteed to lie
in the 0..2 GB range, that's why we limit search by this range.
Fixes:
e71de54a4943 ("x86: Add Intel Tangier support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fixed a typo in the commit message]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 9 Nov 2020 14:12:25 +0000 (07:12 -0700)]
x86: coral: Update the boot script
Make use of the new bootargs substitution mechanism and zboot command
syntax.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 9 Nov 2020 14:12:24 +0000 (07:12 -0700)]
x86: zimage: Update cmdline parameter to be an env var
With the updated changes to bootargs substitution[1], the zboot command
needs to be updated to get its command line from an environment variable
instead of a memory address. This is because the command-line string must
be updated to convert %U to ${uuid}, etc.
In any case it is more flexible to use a environment variable and it is
best to do this before the release to avoid a subsequent change.
Update the command accordingly.
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=212481
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Tue, 15 Dec 2020 18:57:03 +0000 (13:57 -0500)]
Merge tag 'doc-2021-01-rc4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Documentation fixes for v2020.01-rc4
Move several README files to reStructured text for the HTML documentation.
Describe register for global data on x86.
Allow building HTML documentation with Sphinx 3
Igor Opaniuk [Thu, 29 Oct 2020 10:59:19 +0000 (12:59 +0200)]
distro_bootcmd: set devtype for dhcp boot
Set $devtype for DHCP boot, which can be handy for the boot.scr
for detection of devtype used (for example, when the same boot.scr is
used for both mmc/dhcp boot):
if test ${devtype} = "dhcp"; then
...
fi
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Tom Rini [Tue, 15 Dec 2020 14:08:14 +0000 (09:08 -0500)]
Merge tag 'u-boot-amlogic-
20201215' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic
- fix pinctrl BIAS setup which caused failure on some eMMC models
- fix dr-mode configuration in dwc3-meson-g12a glue driver
Heinrich Schuchardt [Sat, 12 Dec 2020 08:15:12 +0000 (09:15 +0100)]
doc: uefi: remove leading $ from bash commands
Use the same formatting for all bash commands.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 12 Dec 2020 09:53:17 +0000 (10:53 +0100)]
doc: move README.bootmenu to HTML doc
Convert README.bootmenu to reStructured text and move it to
usage/bootmenu.rst.
Adjust the text concerning configuration settings as these now are managed
via Kconfig.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Heinrich Schuchardt [Sat, 12 Dec 2020 09:14:22 +0000 (10:14 +0100)]
doc: move README.trace to HTML documentation
Convert README.trace to reStructured text and move it to develop/trace.rst.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Sat, 12 Dec 2020 08:37:47 +0000 (09:37 +0100)]
doc: move README.NetConsole to HTML documentation
Convert README.NetConsole to reStructured text and move it to
doc/usage/netconsole.rst.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Sat, 12 Dec 2020 08:00:12 +0000 (09:00 +0100)]
doc: use code-block in pstore.rst
Use syntax highlighting for a Linux console session.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 12 Dec 2020 07:50:37 +0000 (08:50 +0100)]
doc: move pstore.rst to usage/pstore.rst
Let's have a separate chapter dedicated to using U-Boot.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Sat, 12 Dec 2020 07:33:28 +0000 (08:33 +0100)]
doc: move README.commands to HTML doc
Reformat README.commands as reStructured text and add it to the HTML
documentation as develop/commands.rst.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Mon, 30 Nov 2020 08:52:57 +0000 (09:52 +0100)]
doc: allow building htmldoc with Sphinx 3+
Due to removed function c_funcptr_sig_re building with Sphinx 3 fails.
With the patch building succeeds with a lot of warnings if the '-W' flag is
removed from doc/Makefile. Most of the documentation is correct
This follows the approach taken by the Linux kernel.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Thu, 15 Oct 2020 05:40:57 +0000 (07:40 +0200)]
doc: global data pointer on x86, x86_64
On x86 the global data pointer is stored in register fs.
On x86_64 no register is used for the global data pointer.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Sun, 20 Sep 2020 10:01:30 +0000 (12:01 +0200)]
doc/build/gcc.rst: required packages for SUSE
Describe the packages required to build U-Boot on SUSE.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tom Rini [Mon, 14 Dec 2020 20:11:05 +0000 (15:11 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv
- Fix wrong amoswap t1 usage in startup.
- Reset the board after crash.
- Enable distro booting from an attached SCSI disk for QEMU.
- Support the optional header fields in efi header.
Neil Armstrong [Mon, 14 Dec 2020 18:39:07 +0000 (19:39 +0100)]
pinctrl: meson: fix bit manipulation of pin bias configuration
This fixes the wrong usage of clrsetbits_le32(), badly setting the set argument.
Fixes:
c4c726c26b ("pinctrl: meson: add pinconf support")
Reported-by: Anton Arapov <arapov@gmail.com>
Reported-by: Otto Meier <gf435@gmx.net>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Marek Szyprowski [Mon, 14 Dec 2020 11:34:19 +0000 (12:34 +0100)]
usb: dwc3-meson-g12a: always configure dr-mode
dwc3_meson_g12a_force_mode() sets the dr-mode of the USB PHY. However
it skips setting the mode if it matches the one done during driver probe
(stored in private structure). This fails if the mode has been changed
to other value and then back to initial one. Fix this by configuring the
dr-mode always, regadless of the one set at the driver probe).
This fixes operation of USB gadget based drivers when they are initialized
for the second time.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Leo Yu-Chi Liang [Mon, 16 Nov 2020 09:07:41 +0000 (17:07 +0800)]
riscv: Complete efi header for RV32/64
This patch depends on Atish's patch.
(https://patchwork.ozlabs.org/project/uboot/patch/
20201013192331.3236458-1-atish.patra@wdc.com/)
Add fields to complete Optional Header "Data Directories" specified in the document.
(https://docs.microsoft.com/en-us/windows/win32/debug/pe-format)
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Cc: rick@andestech.com
Cc: alankao@andestech.com
Cc: atish.patra@wdc.com
Cc: xypron.glpk@gmx.de
Cc: bmeng.cn@gmail.com
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Leo Yu-Chi Liang [Thu, 12 Nov 2020 02:09:52 +0000 (10:09 +0800)]
riscv: Fix efi header size for RV32
This patch depends on Atish's patch.
(https://patchwork.ozlabs.org/project/uboot/patch/
20201013192331.3236458-1-atish.patra@wdc.com/)
Modify the size of the Optional Header "Windows-Specific Fields" to fit with the specification.
(https://docs.microsoft.com/en-us/windows/win32/debug/pe-format)
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Cc: rick@andestech.com
Cc: alankao@andestech.com
Cc: atish.patra@wdc.com
Cc: xypron.glpk@gmx.de
Cc: bmeng.cn@gmail.com
Atish Patra [Tue, 13 Oct 2020 19:23:31 +0000 (12:23 -0700)]
riscv: Fix efi header for RV32
RV32 should use PE32 format instead of PE32+ as the efi header format.
This requires following changes
1. A different header magic value
2. An additional parameter known as BaseOfData. Currently, it is set to
zero in absence of any usage.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Heinrich Schuchardt [Tue, 1 Dec 2020 16:30:26 +0000 (17:30 +0100)]
riscv: qemu: enable distro boot from scsi
Booting via distro boot fails for:
qemu-system-riscv64
-drive if=none,file=sct-riscv64.img,format=raw,id=mydisk \
-device ich9-ahci,id=ahci -device ide-hd,drive=mydisk,bus=ahci.0
Enable distro booting from an attached SCSI disk.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Heinrich Schuchardt [Wed, 2 Dec 2020 13:36:26 +0000 (14:36 +0100)]
riscv: reset after crash
If an exception occurs on ARM or x86, we call panic() which will try to
reset the board. Do the same on RISC-V.
To avoid -Werror=format-zero-length move a '\n' to the string passed to
panic. We don't need a message here as depending on CONFIG_PANIC_HANG we
will either see
### ERROR ### Please RESET the board ###
or
resetting ...
as next message.
Reviewed-by: Rick Chen <rick@andestech.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Brad Kim [Fri, 13 Nov 2020 11:47:51 +0000 (20:47 +0900)]
riscv: fix the wrong swap value register
Not s2 register, t1 register is correct
Fortunately, it works because t1 register has a garbage value
Signed-off-by: Brad Kim <brad.kim@semifive.com>
Reviewed-by: Lukas Auer <lukas@auer.io>
Reviewed-by: Leo Liang <ycliang@andestech.com>
Tom Rini [Fri, 11 Dec 2020 20:55:17 +0000 (15:55 -0500)]
Merge tag 'u-boot-atmel-fixes-2021.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel
Second set of u-boot-atmel fixes for 2021.01 cycle
This set includes very important fixes for: MMC booting on several
boards, drive strength on sam9x60ek mmc lines, compile issues for
timer.c old driver, removal of unwanted access to sam9x60 bit for
oscillator bypass mode, and eeproms read on sama5d2_icp.
Eugen Hristev [Mon, 7 Dec 2020 07:30:59 +0000 (09:30 +0200)]
ARM: dts: at91: sama5d2_icp: fix i2c eeprom compatible
The correct compatible for this eeproms is microchip,
24aa02e48
The previous compatible string was working up to U-boot 2020.04.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Tested-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Tom Rini [Fri, 11 Dec 2020 14:35:03 +0000 (09:35 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add lx2162 soc, lx2162qds support.
- Bug-fixes related ls102x-usb, ifc, bootcmd, secure-boot header,
- rgmii, vid, fdt, env variable, pci for Layerscape products
Hui Song [Fri, 4 Dec 2020 15:56:19 +0000 (21:26 +0530)]
configs: lx2162aqds: Enable gpio driver in defconfig
make lx2162aqds platform to enable gpio driver.
Signed-off-by: Hui Song <hui.song_1@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Aleksandar Gerasimovski [Thu, 26 Nov 2020 10:52:41 +0000 (10:52 +0000)]
arm: ls102xa: select USB PHY erratum's only if USB is enabled
The USB support is not by default enabled on all designs, so it does not
make seance to have USB specific erratum's enabled on such a designs.
On our internal Hitachi-Powergrids design not using the USB controller
there is a crash when accessing those specific memory locations selected
by the erratum flags.
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Aleksandar Gerasimovski [Thu, 26 Nov 2020 10:45:16 +0000 (10:45 +0000)]
drivers: ifc: add define for IFC_CSPRn TE bit
To drive TE pin high is supported IFC configuration that can be used on
some designs.
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Chris Packham [Thu, 3 Dec 2020 03:24:29 +0000 (16:24 +1300)]
powerpc: mpc85xx: Allow boards to override CONFIG_USB_MAX_CONTROLLER_COUNT
If the board isn't strapped to enable USB1 then attempting to access it
will result in a hang. Avoid this by allowing boards to define
CONFIG_USB_MAX_CONTROLLER_COUNT.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Alban Bedel [Tue, 17 Nov 2020 15:20:04 +0000 (16:20 +0100)]
armv8: fsl-layerscape: Fix automatic setting of bootmcd with TF-A
When booting from TF-A there is a logic that attempt to detect if the
default environment is used, if this is the case it then set the
`bootcmd` and `mcinitcmd` depending of the device we booted from.
This detection logic is dubious as it access internals of the env
implementation and it doesn't always work correctly.
First of all it detect any valid environment as not being the
default, so after running `env default -a && saveenv` the board
doesn't boot anymore as `bootcmd` is then empty.
But it also fails in some other ways, for example it always detect a
default environment when redundant env is enabled on MMC, so in that
case `bootcmd` is overwritten on every boot.
Instead of increasing the complexity of the detection just check if
`bootcmd` and `mcinitcmd` are set in the environment and set them if
they are not.
Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Biwen Li [Thu, 5 Nov 2020 11:28:12 +0000 (19:28 +0800)]
net: pfe_eth: read PFE ESBC header flash with spi_flash_read API
Read PFE ESBC header flash with spi_flash_read API
- logs as follows,
Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256
KiB, total 64 MiB
"Synchronous Abort" handler, esr 0x96000210
elr:
000000008206db44 lr :
0000000082004ea0 (reloc)
elr:
00000000b7ba6b44 lr :
00000000b7b3dea0
x0 :
00000000b79407e8 x1 :
0000000040640000
x2 :
0000000000000050 x3 :
0000000000000000
x4 :
000000000000000a x5 :
0000000000000050
x6 :
0000000000000366 x7 :
00000000b7942308
x8 :
00000000b76407c0 x9 :
0000000000000008
x10:
0000000000000044 x11:
00000000b7634d1c
x12:
000000000000004f x13:
0000000000000044
x14:
00000000b7634d98 x15:
00000000b76407c0
x16:
0000000000000000 x17:
0000000000000000
x18:
00000000b7636dd8 x19:
0000000000000000
x20:
00000000b79407d0 x21:
00000000b79407e8
x22:
0000000040640000 x23:
00000000b7634e58
x24:
0000000000000000 x25:
0000000003800000
x26:
00000000b7bdd000 x27:
0000000000000000
x28:
0000000000000000 x29:
00000000b7634d10
Code:
d2800003 eb03005f 54000101 d65f03c0 (
f8636826)
Resetting CPU ...
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Manish Tomar [Thu, 5 Nov 2020 08:38:56 +0000 (14:08 +0530)]
lx2160a: Fix address for secure boot headers
Update kernel_size_sd variable with correct value for lx2160a.
Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Manish Tomar [Thu, 5 Nov 2020 08:38:55 +0000 (14:08 +0530)]
ls1043a: Fix address for secure boot headers
Update kernelheader_addr and kernelheader_addr variables with
correct values for ls1043a.
Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Priyanka Singh [Mon, 2 Nov 2020 06:08:41 +0000 (11:38 +0530)]
layerscape: fdt.c: Check for NULL return value from fdt_getprop()
Check for NULL return value from fdt_getprop() in
fdt_fixup_remove_jr()
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
[Fixed checkpatch errors/warnings]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Madalin Bucur [Wed, 4 Nov 2020 13:09:17 +0000 (15:09 +0200)]
board: freescale: powerpc: add support for all RGMII modes
Make sure all RGMII internal delay modes are covered.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Madalin Bucur [Wed, 4 Nov 2020 13:09:16 +0000 (15:09 +0200)]
armv8: ls1043/ls1046aqds: add support for all RGMII modes
Make sure all RGMII internal delay modes are covered.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Priyanka Singh [Tue, 27 Oct 2020 10:20:14 +0000 (15:50 +0530)]
board: freescale: vid.c: Initialize variable 'i2caddress'
Initialize variable 'i2caddress' in adjust_vdd() to zero
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Biwen Li [Mon, 26 Oct 2020 08:52:36 +0000 (16:52 +0800)]
include/configs: ls1012aqds: add default environment variable
This adds default environment variable for ls1012aqds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Biwen Li [Mon, 26 Oct 2020 07:14:05 +0000 (15:14 +0800)]
board/freescale/common: fix a bug that failed to read/write eeprom on ls1021atsn
Fix a bug that failed to read/write eeprom on ls1021atsn
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Hou Zhiqiang [Mon, 26 Oct 2020 03:57:42 +0000 (11:57 +0800)]
pci: layerscape: fix a dead loop issue
Fixes: commit
8ec619f8fd84 ("pci: layerscape: Fixup PCIe EP
mode DT nodes for LX2160A rev2")
This added the PCIe EP nodes fixup of LX2160A, but it
didn't update the condition value when there isn't a
property 'apio-wins'.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Fixed checkpatch error]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Yangbo Lu [Tue, 13 Oct 2020 06:17:35 +0000 (14:17 +0800)]
configs: lx2162aqds: enable eMMC HS400 mode support
Enable eMMC HS400 mode support on LX2162AQDS.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Yangbo Lu [Fri, 4 Dec 2020 15:01:26 +0000 (20:31 +0530)]
configs: lx2162aqds: enable CONFIG_BOARD_EARLY_INIT_R
Enable CONFIG_BOARD_EARLY_INIT_R for SDHC adapter card
identification and configuration.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Ruchika Gupta [Mon, 28 Sep 2020 12:51:54 +0000 (18:21 +0530)]
configs: lx2162a: Enable OPTEE support
Enable support to compile OPTEE driver, access AVB TA
and RPMB API's access via RPC from OPTEE for lx2162
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Meenakshi Aggarwal [Fri, 4 Dec 2020 14:47:28 +0000 (20:17 +0530)]
armv8: lx2162aqds: Add support for LX2162AQDS platform
This patch add base support for LX2162AQDS board.
LX2162AQDS board supports LX2162A family SoCs.
This patch add basic support of platform.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: hui.song <hui.song_1@nxp.com>
Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Vikas Singh <vikas.singh@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Meenakshi Aggarwal [Thu, 29 Oct 2020 13:46:16 +0000 (19:16 +0530)]
armv8: lx2162a: Add Soc changes to support LX2162A
LX2162 is LX2160 based SoC, it has same die as of LX2160
with different packaging.
LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module,
microSD card, eMMC support, serial console, qspi nor flash, qsgmii,
sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes
interface to support three PCIe gen3 interface.
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Fixed whitespace errors]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Meenakshi Aggarwal [Thu, 29 Oct 2020 13:46:15 +0000 (19:16 +0530)]
drivers/net/phy: Add CORTINA_NO_FW_UPLOAD to Kconfig
Move CORTINA_NO_FW_UPLOAD to Kconfig file so that it can
be controlled via defconfig files.
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:14 +0000 (16:26 +0530)]
pci: ls_pcie_g4: Add size check for config resource
resource "config" is required to have minimum 4KB space
to access all config space of PCI Express EP.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:13 +0000 (16:26 +0530)]
pci: layerscape: Add size check for config resource
resource "config" is required to have minimum 8KB space
as per hardware documentation.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:12 +0000 (16:26 +0530)]
arm: dts: ls1028a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:11 +0000 (16:26 +0530)]
arm: dts: ls1043a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:10 +0000 (16:26 +0530)]
arm: dts: ls1012a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:09 +0000 (16:26 +0530)]
arm: dts: ls1088a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:08 +0000 (16:26 +0530)]
arm: dts: ls2080a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:07 +0000 (16:26 +0530)]
arm: dts: ls1046a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Fri, 4 Dec 2020 14:41:53 +0000 (20:11 +0530)]
arm: dts: lx2160a: add label to pcie nodes in dts
Add label to pcie nodes in dts so that these nodes
are easy to refer.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:05 +0000 (16:26 +0530)]
pci: ls_pcie_g4: Print pcie controller number starting from 1
Print pcie controller number starting from 1
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:04 +0000 (16:26 +0530)]
pci: layerscape: Update print of pcie controller
Print pcie controller number starting from 1
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
[Trimmed subject]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Wasim Khan [Mon, 28 Sep 2020 10:56:03 +0000 (16:26 +0530)]
configs: lx2160a: Enable CONFIG_PCIE_LAYERSCAPE_GEN4
LX2160A-Rev1 uses PCIe layerscape Gen4 controller.
Enable CONFIG_PCIE_LAYERSCAPE_GEN4 for lx2160a.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Tom Rini [Wed, 9 Dec 2020 16:36:41 +0000 (11:36 -0500)]
Merge tag 'u-boot-stm32-
20201209' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm
- Manage CONFIG_ENV_EXT4_DEVICE_AND_PART in stm32mp1 board
- Update ARM STI and ARM STM STM32MP Arch maintainers emails
- Enable internal pull-ups for SDMMC1 on DHCOM SoM
Marek Vasut [Tue, 1 Dec 2020 10:29:20 +0000 (11:29 +0100)]
ARM: dts: stm32: Add USB OTG ID pin on DH AV96
Add USB OTG ID pin mux and switch the USB OTG port
from peripheral to OTG mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Tue, 1 Dec 2020 10:29:19 +0000 (11:29 +0100)]
ARM: dts: stm32: Enable SDMMC3 on DH DRC02
The DH DRC02 board has an on-board microSD slot,
add DT properties to enable the slot.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Tue, 1 Dec 2020 10:29:18 +0000 (11:29 +0100)]
ARM: dts: stm32: Disable SDMMC1 CKIN feedback clock
The STM32MP1 DHCOM SoM can be built with either bus voltage level shifter
or without one on the SDMMC1 interface. Because the SDMMC1 interface is
limited to 50 MHz and hence SD high-speed anyway, disable the SD feedback
clock to permit operation of the same U-Boot image on both SoM with and
without voltage level shifter.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Tue, 1 Dec 2020 10:29:17 +0000 (11:29 +0100)]
ARM: dts: stm32: Enable internal pull-ups for SDMMC1 on DHCOM SoM
The default state of SD bus and clock line is logical HI. SD card IO is
open-drain and pulls the bus lines LO. Always enable the SD bus pull ups
to guarantee this behavior on DHCOM SoM. Note that on SoMs with SD bus
voltage level shifter, the pull ups are built into the level shifter,
however that has no negative impact.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrice Chotard [Wed, 2 Dec 2020 17:47:31 +0000 (18:47 +0100)]
.mailmap: map Patrick Delaunay and my email address
Add our new email address dedicated for upstream activities.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrice Chotard [Wed, 2 Dec 2020 17:47:30 +0000 (18:47 +0100)]
treewide: Update email address Patrick Delaunay and Patrice Chotard
Update Patrick and my email address with the one dedicated to
upstream activities.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrice Chotard [Wed, 2 Dec 2020 17:47:29 +0000 (18:47 +0100)]
MAINTAINERS: Update ARM STI and ARM STM STM32MP Arch maintainers emails
Update Patrick and my email address with the one dedicated to
upstream activities.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Manuel Reis [Wed, 25 Nov 2020 10:16:20 +0000 (10:16 +0000)]
add check for ignored CONFIG_ENV_EXT4_DEVICE_AND_PART definition
Check whether user has explicitly defined device and partition where
environment file will be located before using 'auto' i.e. bootable
partition
Voids the need to set such partition as bootable to work with the
'dev:auto' tuple
Signed-off-by: Manuel Reis <mluis.reis@gmail.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Tom Rini [Tue, 8 Dec 2020 14:53:03 +0000 (09:53 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imx
Tom Rini [Mon, 7 Dec 2020 16:46:12 +0000 (11:46 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Espressobin: Simplify DT handling of board variants (Pali)
- Add Luka Perkov to maintainers of Puzzle-M801 (Luka)
- Armada 38x: Enable board specific USB2 high-speed impedance
threshold configuration (Joshua)
Tom Rini [Fri, 30 Oct 2020 01:22:03 +0000 (21:22 -0400)]
configs: migrate CONFIG_IMX_THERMAL to defconfigs
Done via moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Baruch Siach [Wed, 28 Oct 2020 07:38:52 +0000 (09:38 +0200)]
imx8mp_evk: README instruction fixes
Use the full name of firmware self extracting file to make it run.
Also, don't use sudo when not needed.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Oliver Graute [Fri, 20 Nov 2020 14:05:51 +0000 (15:05 +0100)]
doc: board: imx8qm-rom7720-a1.rst: convert readme to reST
Convert README to reStructuredText format.
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Claudiu Beznea [Wed, 2 Dec 2020 11:39:33 +0000 (13:39 +0200)]
clk: at91: sam9x60: remove the parsing of atmel, main-osc-bypass
Remove the parsing of atmel,main-osc-bypass DT property as the SAM9X60
have no support for crystal oscillator bypass. Setting this bit might
affect the device functionality.
Fixes:
a64862284f65 ("clk: at91: sam9x60: add support compatible with CCF")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Pali Rohár [Wed, 25 Nov 2020 18:20:10 +0000 (19:20 +0100)]
arm: mvebu: Espressobin: Detect presence of emmc at runtime
Try to initialize emmc in board_late_init() and if it fails then we know
that emmc device is not connected.
This allows to use in U-Boot just one DTS file for all Espressobin variants
and also to correctly set fdtfile env variable for Linux kernel.
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Gérald Kerma <gerald@gk2.net>
Reviewed-by: Andre Heider <a.heider@gmail.com>
Pali Rohár [Wed, 25 Nov 2020 18:20:09 +0000 (19:20 +0100)]
arm: mvebu: Espressobin: Add support for emmc into dts file
To simplify setup, configuration and compilation of u-boot, define emmc
node for all Espressobin boards. Espressobin boards without populated emmc
works correctly, just detection and initialization of emmc obviously fails.
Code for emmc is extracted from commit
f1a43c84a960 ("arm64: dts: a3720:
add support for espressobin with populated emmc").
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Gérald Kerma <gerald@gk2.net>
Pali Rohár [Wed, 25 Nov 2020 18:20:08 +0000 (19:20 +0100)]
Revert "arm64: dts: a3720: add support for espressobin with populated emmc"
This reverts commit
f1a43c84a960265309fa8365759de271a70c5a7e.
Pali Rohár [Wed, 25 Nov 2020 18:20:07 +0000 (19:20 +0100)]
Revert "arm64: dts: armada-3720-espressobin: split common parts to .dtsi"
This reverts commit
03bb6a9b1ed7085794c5f167307273d15c99d3f0.
Joshua Scott [Sun, 8 Nov 2020 21:14:08 +0000 (10:14 +1300)]
arm: mvebu: a38x: Configurable USB2 high-speed impedance threshold
Hardware testing of a board using the Armada 385 has shown that an
impedance threshold setting of 0x7 performs better in an eye-diagram
test than with Marvell's recommended value 0x6.
As other boards may still perform better with Marvell's reccomended value,
a configuration option is added with a default value of 0x6.
Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Reviewed-by: Stefan Roese <sr@denx.de>
Luka Kovacic [Thu, 29 Oct 2020 21:30:30 +0000 (22:30 +0100)]
arm: mvebu: puzzle-m801: Add a maintainer
Add Luka Perkov to Puzzle-M801 BOARD MAINTAINERS.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Igor Opaniuk [Thu, 22 Oct 2020 08:21:43 +0000 (11:21 +0300)]
colibri-imx8x: add implementation for board_mem_get_layout
Add implementation of board_mem_get_layout for overriding the memory
layout.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Igor Opaniuk [Thu, 22 Oct 2020 08:21:42 +0000 (11:21 +0300)]
apalis-imx8x: add implementation for board_mem_get_layout
Add implementation of board_mem_get_layout for overriding the memory
layout.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Igor Opaniuk [Thu, 22 Oct 2020 08:21:41 +0000 (11:21 +0300)]
apalis-imx8: add implementation for board_mem_get_layout
Add implementation of board_mem_get_layout for overriding the memory
layout.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Marcel Ziswiler [Thu, 22 Oct 2020 08:21:40 +0000 (11:21 +0300)]
imx8: allow overriding memory layout
Introduce weak function board_mem_get_layout() which allows overriding
the memory layout from board code in runtime, useful for handling
different SKU versions.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>