ath11k: qmi: try to allocate a big block of DMA memory first

[ Upstream commit f6f92968e1e5a7a9d211faaebefc26ebe408dad7 ]

Not all firmware versions support allocating DMA memory in smaller blocks so
first try to allocate big block of DMA memory for QMI. If the allocation fails,
let firmware request multiple blocks of DMA memory with smaller size.

This also fixes an unnecessary error message seen during ath11k probe on
QCA6390:

ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0
ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608127593-15192-1-git-send-email-kvalo@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: fixes possible oops in mtype_resize

[ Upstream commit 2b33d6ffa9e38f344418976b06057e2fc2aa9e2a ]

currently mtype_resize() can cause oops

        t = ip_set_alloc(htable_size(htable_bits));
        if (!t) {
                ret = -ENOMEM;
                goto out;
        }
        t->hregion = ip_set_alloc(ahash_sizeof_regions(htable_bits));

Increased htable_bits can force htable_size() to return 0.
In own turn ip_set_alloc(0) returns not 0 but ZERO_SIZE_PTR,
so follwoing access to t->hregion should trigger an OOPS.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: fix crash caused by NULL rx_channel

[ Upstream commit 3597010630d0aa96f5778901e691c6068bb86318 ]

During connect and disconnect stress test, crashed happened
because ar->rx_channel is NULL. Fix it by checking whether
ar->rx_channel is NULL.

Crash stack is as below:
RIP: 0010:ath11k_dp_rx_h_ppdu+0x110/0x230 [ath11k]
[ 5028.808963]  ath11k_dp_rx_wbm_err+0x14a/0x360 [ath11k]
[ 5028.808970]  ath11k_dp_rx_process_wbm_err+0x41c/0x520 [ath11k]
[ 5028.808978]  ath11k_dp_service_srng+0x25e/0x2d0 [ath11k]
[ 5028.808982]  ath11k_pci_ext_grp_napi_poll+0x23/0x80 [ath11k_pci]
[ 5028.808986]  net_rx_action+0x27e/0x400
[ 5028.808990]  __do_softirq+0xfd/0x2bb
[ 5028.808993]  irq_exit+0xa6/0xb0
[ 5028.808995]  do_IRQ+0x56/0xe0
[ 5028.808997]  common_interrupt+0xf/0xf

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201211055613.9310-1-cjhuang@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875

[ Upstream commit c0bc969c176b10598b31d5d1a5edf9a5261f0a9f ]

xt875 comes up with a iva voltage of 1375000 and android runs at this too. fix
maximum voltage to be consistent with this.

Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: build: move symlink creation to arch/arc/Makefile to avoid race

[ Upstream commit c5e6ae563c802c4d828d42e134af64004db2e58c ]

If you run 'make uImage uImage.gz' with the parallel option, uImage.gz
will be created by two threads simultaneously.

This is because arch/arc/Makefile does not specify the dependency
between uImage and uImage.gz. Hence, GNU Make assumes they can be
built in parallel. One thread descends into arch/arc/boot/ to create
uImage, and another to create uImage.gz.

Please notice the same log is displayed twice in the following steps:

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig
  $ make -j$(nproc) ARCH=arc uImage uImage.gz
  [ snip ]
    LD      vmlinux
    SORTTAB vmlinux
    SYSMAP  System.map
    OBJCOPY arch/arc/boot/vmlinux.bin
    OBJCOPY arch/arc/boot/vmlinux.bin
    GZIP    arch/arc/boot/vmlinux.bin.gz
    GZIP    arch/arc/boot/vmlinux.bin.gz
    UIMAGE  arch/arc/boot/uImage.gz
    UIMAGE  arch/arc/boot/uImage.gz
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2109376 Bytes = 2059.94 KiB = 2.01 MiB
  Load Address: 80000000
  Entry Point:  80004000
    Image arch/arc/boot/uImage is ready
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2815455 Bytes = 2749.47 KiB = 2.69 MiB
  Load Address: 80000000
  Entry Point:  80004000

This is a race between the two threads trying to write to the same file
arch/arc/boot/uImage.gz. This is a potential problem that can generate
a broken file.

I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1:
add boot image dependencies to not generate invalid images").

I highly recommend to avoid such build rules that cause a race condition.

Move the uImage rule to arch/arc/Makefile.

Another strangeness is that arch/arc/boot/Makefile compares the
timestamps between $(obj)/uImage and $(obj)/uImage.*:

  $(obj)/uImage: $(obj)/uImage.$(suffix-y)
          @ln -sf $(notdir $<) $@
          @echo '  Image $@ is ready'

This does not work as expected since $(obj)/uImage is a symlink.
The symlink should be created in a phony target rule.

I used $(kecho) instead of echo to suppress the message
'Image arch/arc/boot/uImage is ready' when the -s option is given.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: build: add boot_targets to PHONY

[ Upstream commit 0cfccb3c04934cdef42ae26042139f16e805b5f7 ]

The top-level boot_targets (uImage and uImage.*) should be phony
targets. They just let Kbuild descend into arch/arc/boot/ and create
files there.

If a file exists in the top directory with the same name, the boot
image will not be created.

You can confirm it by the following steps:

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig all   # vmlinux will be built
  $ touch uImage.gz
  $ make ARCH=arc uImage.gz
  CALL    scripts/atomic/check-atomics.sh
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  # arch/arc/boot/uImage.gz is not created

Specify the targets as PHONY to fix this.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: build: add uImage.lzma to the top-level target

[ Upstream commit f2712ec76a5433e5ec9def2bd52a95df1f96d050 ]

arch/arc/boot/Makefile supports uImage.lzma, but you cannot do
'make uImage.lzma' because the corresponding target is missing
in arch/arc/Makefile. Add it.

I also changed the assignment operator '+=' to ':=' since this is the
only place where we expect this variable to be set.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: build: remove non-existing bootpImage from KBUILD_IMAGE

[ Upstream commit 9836720911cfec25d3fbdead1c438bf87e0f2841 ]

The deb-pkg builds for ARCH=arc fail.

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig
  $ make ARCH=arc bindeb-pkg
  SORTTAB vmlinux
  SYSMAP  System.map
  MODPOST Module.symvers
  make KERNELRELEASE=5.10.0-rc4 ARCH=arc KBUILD_BUILD_VERSION=2 -f ./Makefile intdeb-pkg
  sh ./scripts/package/builddeb
  cp: cannot stat 'arch/arc/boot/bootpImage': No such file or directory
  make[4]: *** [scripts/Makefile.package:87: intdeb-pkg] Error 1
  make[3]: *** [Makefile:1527: intdeb-pkg] Error 2
  make[2]: *** [debian/rules:13: binary-arch] Error 2
  dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
  make[1]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2
  make: *** [Makefile:1527: bindeb-pkg] Error 2

The reason is obvious; arch/arc/Makefile sets $(boot)/bootpImage as
the default image, but there is no rule to build it.

Remove the meaningless KBUILD_IMAGE assignment so it will fallback
to the default vmlinux. With this change, you can build the deb package.

I removed the 'bootpImage' target as well. At best, it provides
'make bootpImage' as an alias of 'make vmlinux', but I do not see
much sense in doing so.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: drop mm and files after task_work_run

[ Upstream commit d434ab6db524ab1efd0afad4ffa1ee65ca6ac097 ]

__io_req_task_submit() run by task_work can set mm and files, but
io_sq_thread() in some cases, and because __io_sq_thread_acquire_mm()
and __io_sq_thread_acquire_files() do a simple current->mm/files check
it may end up submitting IO with mm/files of another task.

We also need to drop it after in the end to drop potentially grabbed
references to them.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't take files/mm for a dead task

[ Upstream commit 621fadc22365f3cf307bcd9048e3372e9ee9cdcc ]

In rare cases a task may be exiting while io_ring_exit_work() trying to
cancel/wait its requests. It's ok for __io_sq_thread_acquire_mm()
because of SQPOLL check, but is not for __io_sq_thread_acquire_files().
Play safe and fail for both of them.

Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: don't leak old mountpoint samples

[ Upstream commit 5a3b590d4b2db187faa6f06adc9a53d6199fb1f9 ]

When the first file is opened, ext4 samples the mountpoint of the
filesystem in 64 bytes of the super block.  It does so using
strlcpy(), this means that the remaining bytes in the super block
string buffer are untouched.  If the mount point before had a longer
path than the current one, it can be reconstructed.

Consider the case where the fs was mounted to "/media/johnjdeveloper"
and later to "/".  The super block buffer then contains
"/\x00edia/johnjdeveloper".

This case was seen in the wild and caused confusion how the name
of a developer ands up on the super block of a filesystem used
in production...

Fix this by using strncpy() instead of strlcpy().  The superblock
field is defined to be a fixed-size char array, and it is already
marked using __nonstring in fs/ext4/ext4.h.  The consumer of the field
in e2fsprogs already assumes that in the case of a 64+ byte mount
path, that s_last_mounted will not be NUL terminated.

Link: https://lore.kernel.org/r/X9ujIOJG/HqMr88R@mit.edu
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: tree-checker: check if chunk item end overflows

[ Upstream commit 347fb0cfc9bab5195c6701e62eda488310d7938f ]

While mounting a crafted image provided by user, kernel panics due to
the invalid chunk item whose end is less than start.

  [66.387422] loop: module loaded
  [66.389773] loop0: detected capacity change from 262144 to 0
  [66.427708] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 12 /dev/loop0 scanned by mount (613)
  [66.431061] BTRFS info (device loop0): disk space caching is enabled
  [66.431078] BTRFS info (device loop0): has skinny extents
  [66.437101] BTRFS error: insert state: end < start 29360127 37748736
  [66.437136] ------------[ cut here ]------------
  [66.437140] WARNING: CPU: 16 PID: 613 at fs/btrfs/extent_io.c:557 insert_state.cold+0x1a/0x46 [btrfs]
  [66.437369] CPU: 16 PID: 613 Comm: mount Tainted: G           O      5.11.0-rc1-custom #45
  [66.437374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
  [66.437378] RIP: 0010:insert_state.cold+0x1a/0x46 [btrfs]
  [66.437420] RSP: 0018:ffff93e5414c3908 EFLAGS: 00010286
  [66.437427] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000
  [66.437431] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff
  [66.437434] RBP: ffff93e5414c3938 R08: 0000000000000001 R09: 0000000000000001
  [66.437438] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d72aa0
  [66.437441] R13: ffff8ec78bc71628 R14: 0000000000000000 R15: 0000000002400000
  [66.437447] FS:  00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000
  [66.437451] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [66.437455] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0
  [66.437460] PKRU: 55555554
  [66.437464] Call Trace:
  [66.437475]  set_extent_bit+0x652/0x740 [btrfs]
  [66.437539]  set_extent_bits_nowait+0x1d/0x20 [btrfs]
  [66.437576]  add_extent_mapping+0x1e0/0x2f0 [btrfs]
  [66.437621]  read_one_chunk+0x33c/0x420 [btrfs]
  [66.437674]  btrfs_read_chunk_tree+0x6a4/0x870 [btrfs]
  [66.437708]  ? kvm_sched_clock_read+0x18/0x40
  [66.437739]  open_ctree+0xb32/0x1734 [btrfs]
  [66.437781]  ? bdi_register_va+0x1b/0x20
  [66.437788]  ? super_setup_bdi_name+0x79/0xd0
  [66.437810]  btrfs_mount_root.cold+0x12/0xeb [btrfs]
  [66.437854]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.437873]  legacy_get_tree+0x34/0x60
  [66.437880]  vfs_get_tree+0x2d/0xc0
  [66.437888]  vfs_kern_mount.part.0+0x78/0xc0
  [66.437897]  vfs_kern_mount+0x13/0x20
  [66.437902]  btrfs_mount+0x11f/0x3c0 [btrfs]
  [66.437940]  ? kfree+0x5ff/0x670
  [66.437944]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.437962]  legacy_get_tree+0x34/0x60
  [66.437974]  vfs_get_tree+0x2d/0xc0
  [66.437983]  path_mount+0x48c/0xd30
  [66.437998]  __x64_sys_mount+0x108/0x140
  [66.438011]  do_syscall_64+0x38/0x50
  [66.438018]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [66.438023] RIP: 0033:0x7f0138827f6e
  [66.438033] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  [66.438040] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e
  [66.438044] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0
  [66.438047] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001
  [66.438050] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [66.438054] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440
  [66.438078] irq event stamp: 18169
  [66.438082] hardirqs last  enabled at (18175): [<ffffffffb81154bf>] console_unlock+0x4ff/0x5f0
  [66.438088] hardirqs last disabled at (18180): [<ffffffffb8115427>] console_unlock+0x467/0x5f0
  [66.438092] softirqs last  enabled at (16910): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20
  [66.438097] softirqs last disabled at (16905): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20
  [66.438103] ---[ end trace e114b111db64298b ]---
  [66.438107] BTRFS error: found node 12582912 29360127 on insert of 37748736 29360127
  [66.438127] BTRFS critical: panic in extent_io_tree_panic:679: locking error: extent tree was modified by another thread while locked (errno=-17 Object already exists)
  [66.441069] ------------[ cut here ]------------
  [66.441072] kernel BUG at fs/btrfs/extent_io.c:679!
  [66.442064] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  [66.443018] CPU: 16 PID: 613 Comm: mount Tainted: G        W  O      5.11.0-rc1-custom #45
  [66.444538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
  [66.446223] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs]
  [66.450878] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246
  [66.451840] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000
  [66.453141] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff
  [66.454445] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001
  [66.455743] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0
  [66.457055] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000
  [66.458356] FS:  00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000
  [66.459841] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [66.460895] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0
  [66.462196] PKRU: 55555554
  [66.462692] Call Trace:
  [66.463139]  set_extent_bit.cold+0x30/0x98 [btrfs]
  [66.464049]  set_extent_bits_nowait+0x1d/0x20 [btrfs]
  [66.490466]  add_extent_mapping+0x1e0/0x2f0 [btrfs]
  [66.514097]  read_one_chunk+0x33c/0x420 [btrfs]
  [66.534976]  btrfs_read_chunk_tree+0x6a4/0x870 [btrfs]
  [66.555718]  ? kvm_sched_clock_read+0x18/0x40
  [66.575758]  open_ctree+0xb32/0x1734 [btrfs]
  [66.595272]  ? bdi_register_va+0x1b/0x20
  [66.614638]  ? super_setup_bdi_name+0x79/0xd0
  [66.633809]  btrfs_mount_root.cold+0x12/0xeb [btrfs]
  [66.652938]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.671925]  legacy_get_tree+0x34/0x60
  [66.690300]  vfs_get_tree+0x2d/0xc0
  [66.708221]  vfs_kern_mount.part.0+0x78/0xc0
  [66.725808]  vfs_kern_mount+0x13/0x20
  [66.742730]  btrfs_mount+0x11f/0x3c0 [btrfs]
  [66.759350]  ? kfree+0x5ff/0x670
  [66.775441]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.791750]  legacy_get_tree+0x34/0x60
  [66.807494]  vfs_get_tree+0x2d/0xc0
  [66.823349]  path_mount+0x48c/0xd30
  [66.838753]  __x64_sys_mount+0x108/0x140
  [66.854412]  do_syscall_64+0x38/0x50
  [66.869673]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [66.885093] RIP: 0033:0x7f0138827f6e
  [66.945613] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  [66.977214] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e
  [66.994266] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0
  [67.011544] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001
  [67.028836] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [67.045812] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440
  [67.216138] ---[ end trace e114b111db64298c ]---
  [67.237089] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs]
  [67.325317] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246
  [67.347946] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000
  [67.371343] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff
  [67.394757] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001
  [67.418409] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0
  [67.441906] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000
  [67.465436] FS:  00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000
  [67.511660] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [67.535047] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0
  [67.558449] PKRU: 55555554
  [67.581146] note: mount[613] exited with preempt_count 2

The image has a chunk item which has a logical start 37748736 and length
18446744073701163008 (-8M). The calculated end 29360127 overflows.
EEXIST was caught by insert_state() because of the duplicate end and
extent_io_tree_panic() was called.

Add overflow check of chunk item end to tree checker so it can be
detected early at mount time.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Add Lenovo Powered USB-C Travel Hub

commit cb82a54904a99df9e8f9e9d282046055dae5a730 upstream.

This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to
use the cdc_ether driver. However, using this driver, with the system
suspended the device constantly sends pause-frames as soon as the
receive buffer fills up. This causes issues with other devices, where
some Ethernet switches stop forwarding packets altogether.

Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.

Signed-off-by: Leon Schuermann <leon@is.currently.online>
Tested-by: Leon Schuermann <leon@is.currently.online>
Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stmmac: intel: change all EHL/TGL to auto detect phy addr

commit bff6f1db91e330d7fba56f815cdbc412c75fe163 upstream.

Set all EHL/TGL phy_addr to -1 so that the driver will automatically
detect it at run-time by probing all the possible 32 addresses.

Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Link: https://lore.kernel.org/r/20201106094341.4241-1-vee.khee.wong@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: defer decryption to a tasklet if interrupts disabled

commit c87a95dc28b1431c7e77e2c0c983cf37698089d2 upstream.

On some specific hardware on early boot we occasionally get:

[ 1193.920255][    T0] BUG: sleeping function called from invalid context at mm/mempool.c:381
[ 1193.936616][    T0] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/69
[ 1193.953233][    T0] no locks held by swapper/69/0.
[ 1193.965871][    T0] irq event stamp: 575062
[ 1193.977724][    T0] hardirqs last  enabled at (575061): [<ffffffffab73f662>] tick_nohz_idle_exit+0xe2/0x3e0
[ 1194.002762][    T0] hardirqs last disabled at (575062): [<ffffffffab74e8af>] flush_smp_call_function_from_idle+0x4f/0x80
[ 1194.029035][    T0] softirqs last  enabled at (575050): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20
[ 1194.054227][    T0] softirqs last disabled at (575043): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20
[ 1194.079389][    T0] CPU: 69 PID: 0 Comm: swapper/69 Not tainted 5.10.6-cloudflare-kasan-2021.1.4-dev #1
[ 1194.104103][    T0] Hardware name: NULL R162-Z12-CD/MZ12-HD4-CD, BIOS R10 06/04/2020
[ 1194.119591][    T0] Call Trace:
[ 1194.130233][    T0]  dump_stack+0x9a/0xcc
[ 1194.141617][    T0]  ___might_sleep.cold+0x180/0x1b0
[ 1194.153825][    T0]  mempool_alloc+0x16b/0x300
[ 1194.165313][    T0]  ? remove_element+0x160/0x160
[ 1194.176961][    T0]  ? blk_mq_end_request+0x4b/0x490
[ 1194.188778][    T0]  crypt_convert+0x27f6/0x45f0 [dm_crypt]
[ 1194.201024][    T0]  ? rcu_read_lock_sched_held+0x3f/0x70
[ 1194.212906][    T0]  ? module_assert_mutex_or_preempt+0x3e/0x70
[ 1194.225318][    T0]  ? __module_address.part.0+0x1b/0x3a0
[ 1194.237212][    T0]  ? is_kernel_percpu_address+0x5b/0x190
[ 1194.249238][    T0]  ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [dm_crypt]
[ 1194.261593][    T0]  ? is_module_address+0x25/0x40
[ 1194.272905][    T0]  ? static_obj+0x8a/0xc0
[ 1194.283582][    T0]  ? lockdep_init_map_waits+0x26a/0x700
[ 1194.295570][    T0]  ? __raw_spin_lock_init+0x39/0x110
[ 1194.307330][    T0]  kcryptd_crypt_read_convert+0x31c/0x560 [dm_crypt]
[ 1194.320496][    T0]  ? kcryptd_queue_crypt+0x1be/0x380 [dm_crypt]
[ 1194.333203][    T0]  blk_update_request+0x6d7/0x1500
[ 1194.344841][    T0]  ? blk_mq_trigger_softirq+0x190/0x190
[ 1194.356831][    T0]  blk_mq_end_request+0x4b/0x490
[ 1194.367994][    T0]  ? blk_mq_trigger_softirq+0x190/0x190
[ 1194.379693][    T0]  flush_smp_call_function_queue+0x24b/0x560
[ 1194.391847][    T0]  flush_smp_call_function_from_idle+0x59/0x80
[ 1194.403969][    T0]  do_idle+0x287/0x450
[ 1194.413891][    T0]  ? arch_cpu_idle_exit+0x40/0x40
[ 1194.424716][    T0]  ? lockdep_hardirqs_on_prepare+0x286/0x3f0
[ 1194.436399][    T0]  ? _raw_spin_unlock_irqrestore+0x39/0x40
[ 1194.447759][    T0]  cpu_startup_entry+0x19/0x20
[ 1194.458038][    T0]  secondary_startup_64_no_verify+0xb0/0xbb

IO completion can be queued to a different CPU by the block subsystem as a "call
single function/data". The CPU may run these routines from the idle task, but it
does so with interrupts disabled.

It is not a good idea to do decryption with irqs disabled even in an idle task
context, so just defer it to a tasklet (as is done with requests from hard irqs).

Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: do not call bio_endio() from the dm-crypt tasklet

commit 8e14f610159d524cd7aac37982826d3ef75c09e8 upstream.

Sometimes, when dm-crypt executes decryption in a tasklet, we may get
"BUG: KASAN: use-after-free in tasklet_action_common.constprop..."
with a kasan-enabled kernel.

When the decryption fully completes in the tasklet, dm-crypt will call
bio_endio(), which in turn will call clone_endio() from dm.c core code. That
function frees the resources associated with the bio, including per bio private
structures. For dm-crypt it will free the current struct dm_crypt_io, which
contains our tasklet object, causing use-after-free, when the tasklet is being
dequeued by the kernel.

To avoid this, do not call bio_endio() from the current tasklet context, but
delay its execution to the dm-crypt IO workqueue.

Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: do not wait for backlogged crypto request completion in softirq

commit 8abec36d1274bbd5ae8f36f3658b9abb3db56c31 upstream.

Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd
workqueues") made it possible for some code paths in dm-crypt to be
executed in softirq context, when the underlying driver processes IO
requests in interrupt/softirq context.

When Crypto API backlogs a crypto request, dm-crypt uses
wait_for_completion to avoid sending further requests to an already
overloaded crypto driver. However, if the code is executing in softirq
context, we might get the following stacktrace:

[  210.235213][    C0] BUG: scheduling while atomic: fio/2602/0x00000102
[  210.236701][    C0] Modules linked in:
[  210.237566][    C0] CPU: 0 PID: 2602 Comm: fio Tainted: G        W         5.10.0+ #50
[  210.239292][    C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[  210.241233][    C0] Call Trace:
[  210.241946][    C0]  <IRQ>
[  210.242561][    C0]  dump_stack+0x7d/0xa3
[  210.243466][    C0]  __schedule_bug.cold+0xb3/0xc2
[  210.244539][    C0]  __schedule+0x156f/0x20d0
[  210.245518][    C0]  ? io_schedule_timeout+0x140/0x140
[  210.246660][    C0]  schedule+0xd0/0x270
[  210.247541][    C0]  schedule_timeout+0x1fb/0x280
[  210.248586][    C0]  ? usleep_range+0x150/0x150
[  210.249624][    C0]  ? unpoison_range+0x3a/0x60
[  210.250632][    C0]  ? ____kasan_kmalloc.constprop.0+0x82/0xa0
[  210.251949][    C0]  ? unpoison_range+0x3a/0x60
[  210.252958][    C0]  ? __prepare_to_swait+0xa7/0x190
[  210.254067][    C0]  do_wait_for_common+0x2ab/0x370
[  210.255158][    C0]  ? usleep_range+0x150/0x150
[  210.256192][    C0]  ? bit_wait_io_timeout+0x160/0x160
[  210.257358][    C0]  ? blk_update_request+0x757/0x1150
[  210.258582][    C0]  ? _raw_spin_lock_irq+0x82/0xd0
[  210.259674][    C0]  ? _raw_read_unlock_irqrestore+0x30/0x30
[  210.260917][    C0]  wait_for_completion+0x4c/0x90
[  210.261971][    C0]  crypt_convert+0x19a6/0x4c00
[  210.263033][    C0]  ? _raw_spin_lock_irqsave+0x87/0xe0
[  210.264193][    C0]  ? kasan_set_track+0x1c/0x30
[  210.265191][    C0]  ? crypt_iv_tcw_ctr+0x4a0/0x4a0
[  210.266283][    C0]  ? kmem_cache_free+0x104/0x470
[  210.267363][    C0]  ? crypt_endio+0x91/0x180
[  210.268327][    C0]  kcryptd_crypt_read_convert+0x30e/0x420
[  210.269565][    C0]  blk_update_request+0x757/0x1150
[  210.270563][    C0]  blk_mq_end_request+0x4b/0x480
[  210.271680][    C0]  blk_done_softirq+0x21d/0x340
[  210.272775][    C0]  ? _raw_spin_lock+0x81/0xd0
[  210.273847][    C0]  ? blk_mq_stop_hw_queue+0x30/0x30
[  210.275031][    C0]  ? _raw_read_lock_irq+0x40/0x40
[  210.276182][    C0]  __do_softirq+0x190/0x611
[  210.277203][    C0]  ? handle_edge_irq+0x221/0xb60
[  210.278340][    C0]  asm_call_irq_on_stack+0x12/0x20
[  210.279514][    C0]  </IRQ>
[  210.280164][    C0]  do_softirq_own_stack+0x37/0x40
[  210.281281][    C0]  irq_exit_rcu+0x110/0x1b0
[  210.282286][    C0]  common_interrupt+0x74/0x120
[  210.283376][    C0]  asm_common_interrupt+0x1e/0x40
[  210.284496][    C0] RIP: 0010:_aesni_enc1+0x65/0xb0

Fix this by making crypt_convert function reentrant from the point of
a single bio and make dm-crypt defer further bio processing to a
workqueue, if Crypto API backlogs a request in interrupt context.

Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq

commit d68b29584c25dbacd01ed44a3e45abb35353f1de upstream.

Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd
workqueues") made it possible for some code paths in dm-crypt to be
executed in softirq context, when the underlying driver processes IO
requests in interrupt/softirq context.

In this case sometimes when allocating a new crypto request we may get
a stacktrace like below:

[  210.103008][    C0] BUG: sleeping function called from invalid context at mm/mempool.c:381
[  210.104746][    C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio
[  210.106599][    C0] CPU: 0 PID: 2602 Comm: fio Tainted: G        W         5.10.0+ #50
[  210.108331][    C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[  210.110212][    C0] Call Trace:
[  210.110921][    C0]  <IRQ>
[  210.111527][    C0]  dump_stack+0x7d/0xa3
[  210.112411][    C0]  ___might_sleep.cold+0x122/0x151
[  210.113527][    C0]  mempool_alloc+0x16b/0x2f0
[  210.114524][    C0]  ? __queue_work+0x515/0xde0
[  210.115553][    C0]  ? mempool_resize+0x700/0x700
[  210.116586][    C0]  ? crypt_endio+0x91/0x180
[  210.117479][    C0]  ? blk_update_request+0x757/0x1150
[  210.118513][    C0]  ? blk_mq_end_request+0x4b/0x480
[  210.119572][    C0]  ? blk_done_softirq+0x21d/0x340
[  210.120628][    C0]  ? __do_softirq+0x190/0x611
[  210.121626][    C0]  crypt_convert+0x29f9/0x4c00
[  210.122668][    C0]  ? _raw_spin_lock_irqsave+0x87/0xe0
[  210.123824][    C0]  ? kasan_set_track+0x1c/0x30
[  210.124858][    C0]  ? crypt_iv_tcw_ctr+0x4a0/0x4a0
[  210.125930][    C0]  ? kmem_cache_free+0x104/0x470
[  210.126973][    C0]  ? crypt_endio+0x91/0x180
[  210.127947][    C0]  kcryptd_crypt_read_convert+0x30e/0x420
[  210.129165][    C0]  blk_update_request+0x757/0x1150
[  210.130231][    C0]  blk_mq_end_request+0x4b/0x480
[  210.131294][    C0]  blk_done_softirq+0x21d/0x340
[  210.132332][    C0]  ? _raw_spin_lock+0x81/0xd0
[  210.133289][    C0]  ? blk_mq_stop_hw_queue+0x30/0x30
[  210.134399][    C0]  ? _raw_read_lock_irq+0x40/0x40
[  210.135458][    C0]  __do_softirq+0x190/0x611
[  210.136409][    C0]  ? handle_edge_irq+0x221/0xb60
[  210.137447][    C0]  asm_call_irq_on_stack+0x12/0x20
[  210.138507][    C0]  </IRQ>
[  210.139118][    C0]  do_softirq_own_stack+0x37/0x40
[  210.140191][    C0]  irq_exit_rcu+0x110/0x1b0
[  210.141151][    C0]  common_interrupt+0x74/0x120
[  210.142171][    C0]  asm_common_interrupt+0x1e/0x40

Fix this by allocating crypto requests with GFP_ATOMIC mask in
interrupt context.

Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix the maximum number of arguments

commit 17ffc193cdc6dc7a613d00d8ad47fc1f801b9bf0 upstream.

Advance the maximum number of arguments from 9 to 15 to account for
all potential feature flags that may be supplied.

Linux 4.19 added "meta_device"
(356d9d52e1221ba0c9f10b8b38652f78a5298329) and "recalculate"
(a3fcf7253139609bf9ff901fbf955fba047e75dd) flags.

Commit 468dfca38b1a6fbdccd195d875599cb7c8875cd9 added
"sectors_per_bit" and "bitmap_flush_interval".

Commit 84597a44a9d86ac949900441cea7da0af0f2f473 added
"allow_discards".

And the commit d537858ac8aaf4311b51240893add2fc62003b97 added
"fix_padding".

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix flush with external metadata device

commit 9b5948267adc9e689da609eb61cf7ed49cae5fa8 upstream.

With external metadata device, flush requests are not passed down to the
data device.

Fix this by submitting the flush request in dm_integrity_flush_buffers. In
order to not degrade performance, we overlap the data device flush with
the metadata device flush.

Reported-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm snapshot: flush merged data before committing metadata

commit fcc42338375a1e67b8568dbb558f8b784d0f3b01 upstream.

If the origin device has a volatile write-back cache and the following
events occur:

1: After finishing merge operation of one set of exceptions,
   merge_callback() is invoked.
2: Update the metadata in COW device tracking the merge completion.
   This update to COW device is flushed cleanly.
3: System crashes and the origin device's cache where the recent
   merge was completed has not been flushed.

During the next cycle when we read the metadata from the COW device,
we will skip reading those metadata whose merge was completed in
step (1). This will lead to data loss/corruption.

To address this, flush the origin device post merge IO before
updating the metadata.

Cc: stable@vger.kernel.org
Signed-off-by: Akilesh Kailash <akailash@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm raid: fix discard limits for raid1

commit cc07d72bf350b77faeffee1c37bc52197171473f upstream.

Block core warned that discard_granularity was 0 for dm-raid with
personality of raid1.  Reason is that raid_io_hints() was incorrectly
special-casing raid1 rather than raid0.

Fix raid_io_hints() by removing discard limits settings for
raid1. Check for raid0 instead.

Fixes: 61697a6abd24a ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Stephan Bärwolf <stephan@matrixstorm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/process_vm_access.c: include compat.h

commit eb351d75ce1e75b4f793d609efac08426ca50acd upstream.

Fix the build error:

  mm/process_vm_access.c:277:5: error: implicit declaration of function 'in_compat_syscall'; did you mean 'in_ia32_syscall'? [-Werror=implicit-function-declaration]

Fixes: 38dc5079da7081e "Fix compat regression in process_vm_rw()"
Reported-by: syzbot+5b0d0de84d6c65b8dd2b@syzkaller.appspotmail.com
Cc: Kyle Huey <me@kylehuey.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: fix potential missing huge page size info

commit 0eb98f1588c2cc7a79816d84ab18a55d254f481c upstream.

The huge page size is encoded for VM_FAULT_HWPOISON errors only.  So if
we return VM_FAULT_HWPOISON, huge page size would just be ignored.

Link: https://lkml.kernel.org/r/20210107123449.38481-1-linmiaohe@huawei.com
Fixes: aa50d3a7aa81 ("Encode huge page size for VM_FAULT_HWPOISON errors")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmalloc.c: fix potential memory leak

commit c22ee5284cf58017fa8c6d21d8f8c68159b6faab upstream.

In VM_MAP_PUT_PAGES case, we should put pages and free array in vfree.
But we missed to set area->nr_pages in vmap().  So we would fail to put
pages in __vunmap() because area->nr_pages = 0.

Link: https://lkml.kernel.org/r/20210107123541.39206-1-linmiaohe@huawei.com
Fixes: b944afc9d64d ("mm: add a VM_MAP_PUT_PAGES flag for vmap")
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compiler.h: Raise minimum version of GCC to 5.1 for arm64

commit dca5244d2f5b94f1809f0c02a549edf41ccd5493 upstream.

GCC versions >= 4.9 and < 5.1 have been shown to emit memory references
beyond the stack pointer, resulting in memory corruption if an interrupt
is taken after the stack pointer has been adjusted but before the
reference has been executed. This leads to subtle, infrequent data
corruption such as the EXT4 problems reported by Russell King at the
link below.

Life is too short for buggy compilers, so raise the minimum GCC version
required by arm64 to 5.1.

Reported-by: Russell King <linux@armlinux.org.uk>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210105154726.GD1551@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/20210112224832.10980-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/privcmd: allow fetching resource sizes

commit ef3a575baf53571dc405ee4028e26f50856898e7 upstream.

Allow issuing an IOCTL_PRIVCMD_MMAP_RESOURCE ioctl with num = 0 and
addr = 0 in order to fetch the size of a specific resource.

Add a shortcut to the default map resource path, since fetching the
size requires no address to be passed in, and thus no VMA to setup.

This is missing from the initial implementation, and causes issues
when mapping resources that don't have fixed or known sizes.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: stable@vger.kernel.org # >= 4.18
Link: https://lore.kernel.org/r/20210112115358.23346-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: scan: Harden acpi_device_add() against device ID overflows

commit a58015d638cd4e4555297b04bec9b49028369075 upstream.

Linux VM on Hyper-V crashes with the latest mainline:

[    4.069624] detected buffer overflow in strcpy
[    4.077733] kernel BUG at lib/string.c:1149!
..
[    4.085819] RIP: 0010:fortify_panic+0xf/0x11
...
[    4.085819] Call Trace:
[    4.085819]  acpi_device_add.cold.15+0xf2/0xfb
[    4.085819]  acpi_add_single_object+0x2a6/0x690
[    4.085819]  acpi_bus_check_add+0xc6/0x280
[    4.085819]  acpi_ns_walk_namespace+0xda/0x1aa
[    4.085819]  acpi_walk_namespace+0x9a/0xc2
[    4.085819]  acpi_bus_scan+0x78/0x90
[    4.085819]  acpi_scan_init+0xfa/0x248
[    4.085819]  acpi_init+0x2c1/0x321
[    4.085819]  do_one_initcall+0x44/0x1d0
[    4.085819]  kernel_init_freeable+0x1ab/0x1f4

This is because of the recent buffer overflow detection in the
commit 6a39e62abbaf ("lib: string.h: detect intra-object overflow in
fortified string functions")

Here acpi_device_bus_id->bus_id can only hold 14 characters, while the
the acpi_device_hid(device) returns a 22-char string
"HYPER_V_GEN_COUNTER_V1".

Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a
string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8
chars.

The field bus_id in struct acpi_device_bus_id was originally defined as
char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the
commit bb0958544f3c ("ACPI: use more understandable bus_id for ACPI
devices")

Fix the issue by changing the field bus_id to const char *, and use
kstrdup_const() to initialize it.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Tested-By: Jethro Beekman <jethro@fortanix.com>
[ rjw: Subject change, whitespace adjustment ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd()

commit f2bc3af6353cb2a33dfa9d270d999d839eef54cb upstream.

In ocrdma_dealloc_ucontext_pd() uctx->cntxt_pd is assigned to the variable
pd and then after uctx->cntxt_pd is freed, the variable pd is passed to
function _ocrdma_dealloc_pd() which dereferences pd directly or through
its call to ocrdma_mbx_dealloc_pd().

Reorder the free using the variable pd.

Cc: stable@vger.kernel.org
Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20201230024653.1516495-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: relocatable: fix possible boot hangup with KASLR enabled

commit 69e976831cd53f9ba304fd20305b2025ecc78eab upstream.

LLVM-built Linux triggered a boot hangup with KASLR enabled.

arch/mips/kernel/relocate.c:get_random_boot() uses linux_banner,
which is a string constant, as a random seed, but accesses it
as an array of unsigned long (in rotate_xor()).
When the address of linux_banner is not aligned to sizeof(long),
such access emits unaligned access exception and hangs the kernel.

Use PTR_ALIGN() to align input address to sizeof(long) and also
align down the input length to prevent possible access-beyond-end.

Fixes: 405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps

commit 698222457465ce343443be81c5512edda86e5914 upstream.

Patches that introduced NT_FILE and NT_SIGINFO notes back in 2012
had taken care of native (fs/binfmt_elf.c) and compat (fs/compat_binfmt_elf.c)
coredumps; unfortunately, compat on mips (which does not go through the
usual compat_binfmt_elf.c) had not been noticed.

As the result, both N32 and O32 coredumps on 64bit mips kernels
have those sections malformed enough to confuse the living hell out of
all gdb and readelf versions (up to and including the tip of binutils-gdb.git).

Longer term solution is to make both O32 and N32 compat use the
regular compat_binfmt_elf.c, but that's too much for backports.  The minimal
solution is to do in arch/mips/kernel/binfmt_elf[on]32.c the same thing
those patches have done in fs/compat_binfmt_elf.c

Cc: stable@kernel.org # v3.7+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB

commit 4d4f9c1a17a3480f8fe523673f7232b254d724b7 upstream.

The compressed payload is not necesarily 4-byte aligned, at least when
compiling with Clang. In that case, the 4-byte value appended to the
compressed payload that corresponds to the uncompressed kernel image
size must be read using get_unaligned_le32().

This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic
JZ4770 board).

Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: lib: uncached: fix non-standard usage of variable 'sp'

commit 5b058973d3205578aa6c9a71392e072a11ca44ef upstream.

When building mips tinyconfig with clang the following warning show up:

arch/mips/lib/uncached.c:45:6: warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
        if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
            ^~
arch/mips/lib/uncached.c:40:18: note: initialize the variable 'sp' to silence this warning
        register long sp __asm__("$sp");
                        ^
                         = 0
1 warning generated.

Rework to make an explicit inline move, instead of the non-standard use
of specifying registers for local variables. This is what's written
from the gcc-10 manual [1] about specifying registers for local
variables:

"6.47.5.2 Specifying Registers for Local Variables
.................................................
[...]

"The only supported use for this feature is to specify registers for
input and output operands when calling Extended 'asm' (*note Extended
Asm::).  [...]".

[1] https://docs.w3cub.com/gcc~10/local-register-variables
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: fix Section mismatch in reference

commit ad4fddef5f2345aa9214e979febe2f47639c10d9 upstream.

When building mips tinyconfig with clang the following error show up:

WARNING: modpost: vmlinux.o(.text+0x1940c): Section mismatch in reference from the function r4k_cache_init() to the function .init.text:loongson3_sc_init()
The function r4k_cache_init() references
the function __init loongson3_sc_init().
This is often because r4k_cache_init lacks a __init
annotation or the annotation of loongson3_sc_init is wrong.

Remove marked __init from function loongson3_sc_init(),
mips_sc_probe_cm3(), and mips_sc_probe().

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fix KASAN memory mapping.

commit c25a053e15778f6b4d6553708673736e27a6c2cf upstream.

Use virtual address instead of physical address when translating
the address to shadow memory by kasan_mem_to_shadow().

Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL

commit 0aa2ec8a475fb505fd98d93bbcf4e03beeeebcb6 upstream.

The patch fix commit: ad5d112 ("riscv: use vDSO common flow to
reduce the latency of the time-related functions").

The GENERIC_TIME_VSYSCALL should be CONFIG_GENERIC_TIME_VSYSCALL
or vgettimeofday won't work.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: return -ENOSYS for syscall -1

commit cf7b2ae4d70432fa94ebba3fbaab825481ae7189 upstream.

Properly return -ENOSYS for syscall -1 instead of leaving the return value
uninitialized.  This fixes the strace teststuite.

Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Drop a duplicated PAGE_KERNEL_EXEC

commit 0ea02c73775277001c651ad4a0e83781a9acf406 upstream.

commit b91540d52a08 ("RISC-V: Add EFI runtime services") add
a duplicated PAGE_KERNEL_EXEC, kill it.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Fixes: b91540d52a08 ("RISC-V: Add EFI runtime services")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix interrupted close commands

commit 2659d3bff3e1b000f49907d0839178b101a89887 upstream.

Retry close command if it gets interrupted to not leak open handles on
the server.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reported-by: Duncan Findlay <duncf@duncf.ca>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Fixes: 6988a619f5b7 ("cifs: allow syscalls to be restarted in __smb_send_rqst()")
Cc: stable@vger.kernel.org
Reviewd-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: check pointer before freeing

commit 77b6ec01c29aade01701aa30bf1469acc7f2be76 upstream.

clang static analysis reports this problem

dfs_cache.c:591:2: warning: Argument to kfree() is a constant address
  (18446744073709551614), which is not memory allocated by malloc()
        kfree(vi);
        ^~~~~~~~~

In dfs_cache_del_vol() the volume info pointer 'vi' being freed
is the return of a call to find_vol().  The large constant address
is find_vol() returning an error.

Add an error check to dfs_cache_del_vol() similar to the one done
in dfs_cache_update_vol().

Fixes: 54be1f6c1c37 ("cifs: Add DFS cache routines")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
CC: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix bug for rename with RENAME_WHITEOUT

commit 6b4b8e6b4ad8553660421d6360678b3811d5deb9 upstream.

We got a "deleted inode referenced" warning cross our fsstress test. The
bug can be reproduced easily with following steps:

  cd /dev/shm
  mkdir test/
  fallocate -l 128M img
  mkfs.ext4 -b 1024 img
  mount img test/
  dd if=/dev/zero of=test/foo bs=1M count=128
  mkdir test/dir/ && cd test/dir/
  for ((i=0;i<1000;i++)); do touch file$i; done # consume all block
  cd ~ && renameat2(AT_FDCWD, /dev/shm/test/dir/file1, AT_FDCWD,
    /dev/shm/test/dir/dst_file, RENAME_WHITEOUT) # ext4_add_entry in
    ext4_rename will return ENOSPC!!
  cd /dev/shm/ && umount test/ && mount img test/ && ls -li test/dir/file1
  We will get the output:
  "ls: cannot access 'test/dir/file1': Structure needs cleaning"
  and the dmesg show:
  "EXT4-fs error (device loop0): ext4_lookup:1626: inode #2049: comm ls:
  deleted inode referenced: 139"

ext4_rename will create a special inode for whiteout and use this 'ino'
to replace the source file's dir entry 'ino'. Once error happens
latter(the error above was the ENOSPC return from ext4_add_entry in
ext4_rename since all space has been consumed), the cleanup do drop the
nlink for whiteout, but forget to restore 'ino' with source file. This
will trigger the bug describle as above.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Fixes: cd808deced43 ("ext4: support RENAME_WHITEOUT")
Link: https://lore.kernel.org/r/20210105062857.3566-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix wrong list_splice in ext4_fc_cleanup

commit 31e203e09f036f48e7c567c2d32df0196bbd303f upstream.

After full/fast commit, entries in staging queue are promoted to main
queue. In ext4_fs_cleanup function, it splice to staging queue to
staging queue.

Fixes: aa75f4d3daaeb ("ext4: main fast-commit commit path")
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201230094851epcms2p6eeead8cc984379b37b2efd21af90fd1a@epcms2p6
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR

commit 23dd561ad9eae02b4d51bb502fe4e1a0666e9567 upstream.

1: ext4_iget/ext4_find_extent never returns NULL, use IS_ERR
instead of IS_ERR_OR_NULL to fix this.

2: ext4_fc_replay_inode should set the inode to NULL when IS_ERR.
and go to call iput properly.

Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201230033827.3996064-1-yili@winhong.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/bootconfig: Add tracing_on support to helper scripts

commit 55ed4560774d81d7343223b8fd2784c530a9c6c1 upstream.

Add ftrace.instance.INSTANCE.tracing_on support to ftrace2bconf.sh
and bconf2ftrace.sh.

commit 8490db06f914 ("tracing/boot: Add per-instance tracing_on
option support") added the per-instance tracing_on option,
but forgot to update the helper scripts.

Link: https://lkml.kernel.org/r/160749166410.3497930.14204335886811029800.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 8490db06f914 ("tracing/boot: Add per-instance tracing_on option support")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/kprobes: Do the notrace functions check without kprobes on ftrace

commit 7bb83f6fc4ee84e95d0ac0d14452c2619fb3fe70 upstream.

Enable the notrace function check on the architecture which doesn't
support kprobes on ftrace but support dynamic ftrace. This notrace
function check is not only for the kprobes on ftrace but also
sw-breakpoint based kprobes.
Thus there is no reason to limit this check for the arch which
supports kprobes on ftrace.

This also changes the dependency of Kconfig. Because kprobe event
uses the function tracer's address list for identifying notrace
function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether
the target function is notrace or not.

Link: https://lkml.kernel.org/r/20210105065730.2634785-1-naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 45408c4f92506 ("tracing: kprobes: Prohibit probing on notrace function")
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: sii902x: Enable I/O and core VCC supplies if present

commit cc5f7e2fcbe396f2f461cd67c872af771a334bca upstream.

On the SII9022, the IOVCC and CVCC12 supplies must reach the correct
voltage before the reset sequence is initiated. On most boards, this
assumption is true at boot-up, so initialization succeeds.

However, when we try to initialize the chip with incorrect supply
voltages, it will not respond to I2C requests. sii902x_probe() fails
with -ENXIO.

To resolve this, look for the "iovcc" and "cvcc12" regulators, and
make sure they are enabled before starting the reset sequence. If
these supplies are not available in devicetree, then they will default
to dummy-regulator. In that case everything will work like before.

This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode.
On this board, the supplies would be set by the second stage
bootloader, which does not run in falcon mode.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[Fix checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-2-mr.nuke.me@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: display: sii902x: Add supply bindings

commit 4c1e054322da99cbfd293a5fddf283f2fdb3e2d0 upstream.

The sii902x chip family requires IO and core voltages to reach the
correct voltage before chip initialization. Add binding for describing
the two supplies.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-3-mr.nuke.me@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: sii902x: Refactor init code into separate function

commit 91b5e26731c5d409d6134603afc061617639933e upstream.

Separate the hardware initialization code from setting up the data
structures and parsing the device tree. The purpose of this change is
to provide a single exit point and avoid a waterfall of 'goto's in
the subsequent patch.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-1-mr.nuke.me@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/backlight: fix CPU mode backlight takeover on LPT

commit bb83d5fb550bb7db75b29e6342417fda2bbb691c upstream.

The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.

The CPU mode takeover code added in commit 5b1ec9ac7ab5
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".

This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.

Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com
(cherry picked from commit 0d4ced1c5bfe649196877d90442d4fd618e19153)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Limit VFE threads based on GT

commit ffaf97899c4a58b9fefb11534f730785443611a8 upstream.

MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the
range [0, n-1] where n is #EU * (#threads/EU) with the number of threads
based on plaform and the number of EU based on the number of slices and
subslices. This is a fixed number per platform/gt, so appropriately
limit the number of threads we spawn to match the device.

v2: Oversaturate the system with tasks to force execution on every HW
thread; if the thread idles it is returned to the pool and may be reused
again before an unused thread.

v3: Fix more state commands, which was causing Baytrail to barf.
v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Randy Wright <rwright@hpe.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk
(cherry picked from commit eebfb32e26851662d24ea86dd381fd0f83cd4b47)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Allow the sysadmin to override security mitigations

commit 984cadea032b103c5824a5f29d0a36b3e9df6333 upstream.

The clear-residuals mitigation is a relatively heavy hammer and under some
circumstances the user may wish to forgo the context isolation in order
to meet some performance requirement. Introduce a generic module
parameter to allow selectively enabling/disabling different mitigations.

To disable just the clear-residuals mitigation (on Ivybridge, Baytrail,
or Haswell) use the module parameter: i915.mitigations=auto,!residuals

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk
(cherry picked from commit f7452c7cbd5b5dfb9a6c84cb20bea04c89be50cd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add new device id for Renior

commit 53f1e7f6a1720f8299b5283857eedc8f07d29533 upstream.

add DID 0x164C into pciidlist under CHIP_RENOIR family.

Signed-off-by: mengwang <mengbing.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amd/display: Fixed Intermittent blue screen on OLED panel"

commit 4eec66c014e9a406d8d453de958f6791d05427e4 upstream.

commit a861736dae64 ("drm/amd/display: Fixed Intermittent blue screen on OLED panel")

causes power regression for many users. It seems that this change causes
the MCLK to get forced high; this creates a regression for many users
since their devices were not able to drop to a low state after this
change. For this reason, this reverts commit
a861736dae644a0d7abbca0c638ae6aad28feeb8.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1407
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Naveed Ashfaq <Naveed.Ashfaq@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Roman Li <roman.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix DRM_INFO flood if display core is not supported (bug 210921)

commit ff9346dbabbb6595c5c20d90d88ae4a2247487a9 upstream.

This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in
amdgpu_device_asic_has_dc_support(). This info should be only called once.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add green_sardine device id (v2)

commit 21702c8cae51535e09b91341a069503c6ef3d2a3 upstream.

Add green_sardine PCI id support and map it to renoir asic type.

v2: add apu flag

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hyperv: check cpu mask after interrupt has been disabled

commit ad0a6bad44758afa3b440c254a24999a0c7e35d5 upstream.

We've observed crashes due to an empty cpu mask in
hyperv_flush_tlb_others.  Obviously the cpu mask in question is changed
between the cpumask_empty call at the beginning of the function and when
it is actually used later.

One theory is that an interrupt comes in between and a code path ends up
changing the mask. Move the check after interrupt has been disabled to
see if it fixes the issue.

Signed-off-by: Wei Liu <wei.liu@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210105175043.28325-1-wei.liu@kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dapm: remove widget from dirty list on free

commit 5c6679b5cb120f07652418524ab186ac47680b49 upstream.

A widget's "dirty" list_head, much like its "list" list_head, eventually
chains back to a list_head on the snd_soc_card itself. This means that
the list can stick around even after the widget (or all widgets) have
been freed. Currently, however, widgets that are in the dirty list when
freed remain there, corrupting the entire list and leading to memory
errors and undefined behavior when the list is next accessed or
modified.

I encountered this issue when a component failed to probe relatively
late in snd_soc_bind_card(), causing it to bail out and call
soc_cleanup_card_resources(), which eventually called
snd_soc_dapm_free() with widgets that were still dirty from when they'd
been added.

Fixes: db432b414e20 ("ASoC: Do DAPM power checks only for widgets changed since last run")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/f8b5f031d50122bf1a9bfc9cae046badf4a7a31a.1607822410.git.tommyhebb@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad X395

commit 1f092d1c8819679d78a7d9c62a46d4939d217a9d upstream.

The ThinkPad X395 latop does not have the internal digital
microphone connected to the AMD's ACP bridge, but it's advertised
via BIOS. The internal microphone is connected to the HDA codec.

Use DMI to block the microphone PCM device for this platform.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1892115
Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201227164109.269973-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: doc: Fix reference to mixart.rst

commit 3e096a2112b7b407549020cf095e2a425f00fabb upstream.

MIXART.txt has been converted to ReST and renamed. Fix the reference
in alsa-configuration.rst.

Fixes: 3d8e81862ce4 ("ALSA: doc: ReSTize MIXART.txt")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210101221942.1068388-1-j.neuschaefer@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines

commit 91bc156817a3c2007332b64b4f85c32aafbbbea6 upstream.

 * The HP ZBook Fury 15/17 G7 Mobile Workstation are using ALC285 codec
   which is using 0x04 to control mute LED and 0x01 to control micmute LED.

 * The right channel speaker is no sound and it needs to expose GPIO1 for
   initialing AMP.

Add quirks to support them.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210106130549.100532-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: prevent NULL pointer dereference in extent_io_tree_panic

commit 29b665cc51e8b602bf2a275734349494776e3dbc upstream.

Some extent io trees are initialized with NULL private member (e.g.
btrfs_device::alloc_state and btrfs_fs_info::excluded_extents).
Dereference of a NULL tree->private as inode pointer will cause panic.

Pass tree->fs_info as it's known to be valid in all cases.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929
Fixes: 05912a3c04eb ("btrfs: drop extent_io_ops::tree_fs_info callback")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: reloc: fix wrong file extent type check to avoid false ENOENT

commit 50e31ef486afe60f128d42fb9620e2a63172c15c upstream.

[BUG]
There are several bug reports about recent kernel unable to relocate
certain data block groups.

Sometimes the error just goes away, but there is one reporter who can
reproduce it reliably.

The dmesg would look like:

  [438.260483] BTRFS info (device dm-10): balance: start -dvrange=34625344765952..34625344765953
  [438.269018] BTRFS info (device dm-10): relocating block group 34625344765952 flags data|raid1
  [450.439609] BTRFS info (device dm-10): found 167 extents, stage: move data extents
  [463.501781] BTRFS info (device dm-10): balance: ended with status: -2

[CAUSE]
The ENOENT error is returned from the following call chain:

  add_data_references()
  |- delete_v1_space_cache();
     |- if (!found)
   return -ENOENT;

The variable @found is set to true if we find a data extent whose
disk bytenr matches parameter @data_bytes.

With extra debugging, the offending tree block looks like this:

  leaf bytenr = 42676709441536, data_bytenr = 34626327621632

                ctime 1567904822.739884119 (2019-09-08 03:07:02)
                mtime 0.0 (1970-01-01 01:00:00)
                otime 0.0 (1970-01-01 01:00:00)
        item 27 key (51933 EXTENT_DATA 0) itemoff 9854 itemsize 53
                generation 1517381 type 2 (prealloc)
                prealloc data disk byte 34626327621632 nr 262144 <<<
                prealloc data offset 0 nr 262144
        item 28 key (52262 ROOT_ITEM 0) itemoff 9415 itemsize 439
                generation 2618893 root_dirid 256 bytenr 42677048360960 level 3 refs 1
                lastsnap 2618893 byte_limit 0 bytes_used 5557338112 flags 0x0(none)
                uuid d0d4361f-d231-6d40-8901-fe506e4b2b53

Although item 27 has disk bytenr 34626327621632, which matches the
data_bytenr, its type is prealloc, not reg.
This makes the existing code skip that item, and return ENOENT.

[FIX]
The code is modified in commit 19b546d7a1b2 ("btrfs: relocation: Use
btrfs_find_all_leafs to locate data extent parent tree leaves"), before
that commit, we use something like

  "if (type == BTRFS_FILE_EXTENT_INLINE) continue;"

But in that offending commit, we use (type == BTRFS_FILE_EXTENT_REG),
ignoring BTRFS_FILE_EXTENT_PREALLOC.

Fix it by also checking BTRFS_FILE_EXTENT_PREALLOC.

Reported-by: Stéphane Lesimple <stephane_btrfs2@lesimple.fr>
Link: https://lore.kernel.org/linux-btrfs/505cabfa88575ed6dbe7cb922d8914fb@lesimple.fr
Fixes: 19b546d7a1b2 ("btrfs: relocation: Use btrfs_find_all_leafs to locate data extent parent tree leaves")
CC: stable@vger.kernel.org # 5.6+
Tested-By: Stéphane Lesimple <stephane_btrfs2@lesimple.fr>
Reviewed-by: Su Yue <l@damenly.su>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.8

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Link: https://lore.kernel.org/r/20210115122006.047132306@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools headers UAPI: Sync linux/fscrypt.h with the kernel sources

commit 4a443a51776ca9847942523cf987a330894d3a31 upstream.

To pick the changes from:

  3ceb6543e9cf6ed8 ("fscrypt: remove kernel-internal constants from UAPI header")

That don't result in any changes in tooling, just addressing this perf
build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
  diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Remove unused variables in panfrost_job_close()

commit 7d6763ab77b3c047cf7d31ca7c4b799808a684a6 upstream.

Commit a17d609e3e21 ("drm/panfrost: Don't corrupt the queue mutex on
open/close") left unused variables behind, thus generating a warning
at compilation time. Remove those variables.

Fixes: a17d609e3e21 ("drm/panfrost: Don't corrupt the queue mutex on open/close")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201101173817.831769-1-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()

commit f6bcb4c7f366905b66ce8ffca7190118244bb642 upstream.

This code will leak "map->debugfs_name" because the if statement is
reversed so it only frees NULL pointers instead of non-NULL.  In
fact the if statement is not required and should just be removed
because kfree() accepts NULL pointers.

Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: drop bogus skb with CHECKSUM_PARTIAL and offset beyond end of trimmed packet

commit 54970a2fbb673f090b7f02d7f57b10b2e0707155 upstream.

syzbot reproduces BUG_ON in skb_checksum_help():
tun creates (bogus) skb with huge partial-checksummed area and
small ip packet inside. Then ip_rcv trims the skb based on size
of internal ip packet, after that csum offset points beyond of
trimmed skb. Then checksum_tg() called via netfilter hook
triggers BUG_ON:

        offset = skb_checksum_start_offset(skb);
        BUG_ON(offset >= skb_headlen(skb));

To work around the problem this patch forces pskb_trim_rcsum_slow()
to return -EINVAL in described scenario. It allows its callers to
drop such kind of packets.

Link: https://syzkaller.appspot.com/bug?id=b419a5ca95062664fe1a60b764621eb4526e2cd0
Reported-by: syzbot+7010af67ced6105e5ab6@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1b2494af-2c56-8ee2-7bc0-923fcad1cdf8@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix use-after-free in disk_part_iter_next

commit aebf5db917055b38f4945ed6d621d9f07a44ff30 upstream.

Make sure that bdgrab() is done on the 'block_device' instance before
referring to it for avoiding use-after-free.

Cc: <stable@vger.kernel.org>
Reported-by: syzbot+825f0f9657d4e528046e@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: isotp_getname(): fix kernel information leak

commit b42b3a2744b3e8f427de79896720c72823af91ad upstream.

Initialize the sockaddr_can structure to prevent a data leak to user space.

Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: syzbot+057884e2f453e8afebc8@syzkaller.appspotmail.com
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20210112091643.11789-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block/rnbd-clt: avoid module unload race with close confirmation

commit 3a21777c6ee99749bac10727b3c17e5bcfebe5c1 upstream.

We had kernel panic, it is caused by unload module and last
close confirmation.

call trace:
[1196029.743127]  free_sess+0x15/0x50 [rtrs_client]
[1196029.743128]  rtrs_clt_close+0x4c/0x70 [rtrs_client]
[1196029.743129]  ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client]
[1196029.743130]  close_rtrs+0x25/0x50 [rnbd_client]
[1196029.743131]  rnbd_client_exit+0x93/0xb99 [rnbd_client]
[1196029.743132]  __x64_sys_delete_module+0x190/0x260

And in the crashdump confirmation kworker is also running.
PID: 6943   TASK: ffff9e2ac8098000  CPU: 4   COMMAND: "kworker/4:2"
 #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891
 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98
 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938
 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7
 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e
 #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client]
 #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client]
 #7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client]
 #8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client]
 #9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client]

The problem is both code path try to close same session, which lead to
panic.

To fix it, just skip the sess if the refcount already drop to 0.

Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xsk: Rollback reservation at NETDEV_TX_BUSY

commit b1b95cb5c0a9694d47d5f845ba97e226cfda957d upstream.

Rollback the reservation in the completion ring when we get a
NETDEV_TX_BUSY. When this error is received from the driver, we are
supposed to let the user application retry the transmit again. And in
order to do this, we need to roll back the failed send so it can be
retried. Unfortunately, we did not cancel the reservation we had made
in the completion ring. By not doing this, we actually make the
completion ring one entry smaller per NETDEV_TX_BUSY error we get, and
after enough of these errors the completion ring will be of size zero
and transmit will stop working.

Fix this by cancelling the reservation when we get a NETDEV_TX_BUSY
error.

Fixes: 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20201218134525.13119-3-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xsk: Fix race in SKB mode transmit with shared cq

commit f09ced4053bc0a2094a12b60b646114c966ef4c6 upstream.

Fix a race when multiple sockets are simultaneously calling sendto()
when the completion ring is shared in the SKB case. This is the case
when you share the same netdev and queue id through the
XDP_SHARED_UMEM bind flag. The problem is that multiple processes can
be in xsk_generic_xmit() and call the backpressure mechanism in
xskq_prod_reserve(xs->pool->cq). As this is a shared resource in this
specific scenario, a race might occur since the rings are
single-producer single-consumer.

Fix this by moving the tx_completion_lock from the socket to the pool
as the pool is shared between the sockets that share the completion
ring. (The pool is not shared when this is not the case.) And then
protect the accesses to xskq_prod_reserve() with this lock. The
tx_completion_lock is renamed cq_lock to better reflect that it
protects accesses to the potentially shared completion ring.

Fixes: 35fcde7f8deb ("xsk: support for Tx")
Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20201218134525.13119-2-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Don't access PMCR_EL0 when no PMU is available

commit 2a5f1b67ec577fb1544b563086e0377f095f88e2 upstream.

We reset the guest's view of PMCR_EL0 unconditionally, based on
the host's view of this register. It is however legal for an
implementation not to provide any PMU, resulting in an UNDEF.

The obvious fix is to skip the reset of this shadow register
when no PMU is available, sidestepping the issue entirely.
If no PMU is available, the guest is not able to request
a virtual PMU anyway, so not doing nothing is the right thing
to do!

It is unlikely that this bug can hit any HW implementation
though, as they all provide a PMU. It has been found using nested
virt with the host KVM not implementing the PMU itself.

Fixes: ab9468340d2bc ("arm64: KVM: Add access handler for PMCR register")
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201210083059.1277162-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: fib_nexthops: Fix wrong mausezahn invocation

commit a5c9ca76a1c61fb5e4c35de8eb25aa925b03c9e4 upstream.

For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an
error is returned:

 # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn"
 Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address.
  Invalid command line parameters!

Fixes: 7c741868ceab ("selftests: Add torture tests to nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvneta: fix error message when MTU too large for XDP

commit 0d136f5cd9a7ba6ded7f8ff17e8b1ba680f37625 upstream.

The error message says that "Jumbo frames are not supported on XDP", but
the code checks for mtu > MVNETA_MAX_RX_BUF_SIZE, not mtu > 1500.

Fix this error message.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20210105172333.21613-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dp: Track pm_qos per connector

commit 9397d66212cdf7a21c66523f1583e5d63a609e84 upstream.

Since multiple connectors may run intel_dp_aux_xfer conncurrently, a
single global pm_qos does not suffice. (One connector may disable the
dma-latency boost prematurely while the second is still depending on
it.) Instead of a single global pm_qos, track the pm_qos request for
each intel_dp.

v2: Move the pm_qos setup/teardown to intel_dp_aux_init/fini

Fixes: 9ee32fea5fe8 ("drm/i915: irq-drive the dp aux communication")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201230202309.23982-1-chris@chris-wilson.co.uk
(cherry picked from commit b3304591f14b437b6bccd8dbff06006c11837031)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: disable force link UP during port init procedure

commit 87508224485323ce2d4e7fb929ec80f51adcc238 upstream.

Force link UP can be enabled by bootloader during tftpboot
and breaks NFS support.
Force link UP disabled during port init procedure.

Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: qcom-rpmh-regulator: correct hfsmps515 definition

commit df6b92fa40050e59ea89784294bf6d04c0c47705 upstream.

According to the datasheet pm8009's HFS515 regulators have 16mV
resolution rather than declared 1.6 mV. Correct the resolution.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpufeature: remove non-exist CONFIG_KVM_ARM_HOST

commit 45ba7b195a369f35cb39094fdb32efe5908b34ad upstream.

Commit d82755b2e781 ("KVM: arm64: Kill off CONFIG_KVM_ARM_HOST") deletes
CONFIG_KVM_ARM_HOST option, it should use CONFIG_KVM instead.

Just remove CONFIG_KVM_ARM_HOST here.

Fixes: d82755b2e781 ("KVM: arm64: Kill off CONFIG_KVM_ARM_HOST")
Signed-off-by: Shannon Zhao <shannon.zhao@linux.alibaba.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1609760324-92271-1-git-send-email-shannon.zhao@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wan: ds26522: select CONFIG_BITREVERSE

commit 69931e11288520c250152180ecf9b6ac5e6e40ed upstream.

Without this, the driver runs into a link failure

arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe':
slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write':
slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table'

Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: debugfs: Fix a memory leak when calling regmap_attach_dev

commit cffa4b2122f5f3e53cf3d529bbc74651f95856d5 upstream.

After initializing the regmap through
syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the
device, because the debugfs_name has been allocated, there is no
need to redistribute it again

unreferenced object 0xd8399b80 (size 64):
  comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s)
  hex dump (first 32 bytes):
64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72
dummy-iomuxc-gpr
40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69
@20e4000..R[.~Bi
  backtrace:
    [<ca384d6f>] kasprintf+0x2c/0x54
    [<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc
    [<bc4181da>] __regmap_init+0xc38/0xd88
    [<1f7e0609>] of_syscon_register+0x168/0x294
    [<735e8766>] device_node_get_regmap+0x6c/0x98
    [<d96c8982>] imx6ul_init_machine+0x20/0x88
    [<0456565b>] customize_machine+0x1c/0x30
    [<d07393d8>] do_one_initcall+0x80/0x3ac
    [<7e584867>] kernel_init_freeable+0x170/0x1f0
    [<80074741>] kernel_init+0x8/0x120
    [<285d6f28>] ret_from_fork+0x14/0x20
    [<00000000>] 0x0

Fixes: 9b947a13e7f6 ("regmap: use debugfs even when no device")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix two double free cases

commit 7a6eb072a9548492ead086f3e820e9aac71c7138 upstream.

mlx5e_create_ttc_table_groups() frees ft->g on failure of
kvzalloc(), but such failure will be caught by its caller
in mlx5e_create_ttc_table() and ft->g will be freed again
in mlx5e_destroy_flow_table(). The same issue also occurs
in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after
kfree() to avoid double free.

Fixes: 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets")
Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups

commit 5b0bb12c58ac7d22e05b5bfdaa30a116c8c32e32 upstream.

When mlx5_create_flow_group() fails, ft->g should be
freed just like when kvzalloc() fails. The caller of
mlx5e_create_l2_table_groups() does not catch this
issue on failure, which leads to memleak.

Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-tcp: Fix possible race of io_work and direct send

commit 5c11f7d9f843bdd24cd29b95401938bc3f168070 upstream.

We may send a request (with or without its data) from two paths:

  1. From our I/O context nvme_tcp_io_work which is triggered from:
    - queue_rq
    - r2t reception
    - socket data_ready and write_space callbacks
  2. Directly from queue_rq if the send_list is empty (because we want to
     save the context switch associated with scheduling our io_work).

However, given that now we have the send_mutex, we may run into a race
condition where none of these contexts will send the pending payload to
the controller. Both io_work send path and queue_rq send path
opportunistically attempt to acquire the send_mutex however queue_rq only
attempts to send a single request, and if io_work context fails to
acquire the send_mutex it will complete without rescheduling itself.

The race can trigger with the following sequence:

  1. queue_rq sends request (no incapsule data) and blocks
  2. RX path receives r2t - prepares data PDU to send, adds h2cdata PDU
     to the send_list and schedules io_work
  3. io_work triggers and cannot acquire the send_mutex - because of (1),
     ends without self rescheduling
  4. queue_rq completes the send, and completes

==> no context will send the h2cdata - timeout.

Fix this by having queue_rq sending as much as it can from the send_list
such that if it still has any left, its because the socket buffer is
full and the socket write_space callback will trigger, thus guaranteeing
that a context will be scheduled to send the h2cdata PDU.

Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context")
Reported-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reported-by: Samuel Jones <sjones@kalrayinc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpftool: Fix compilation failure for net.o with older glibc

commit 6f02b540d7597f357bc6ee711346761045d4e108 upstream.

For older glibc ~2.17, #include'ing both linux/if.h and net/if.h
fails due to complaints about redefinition of interface flags:

  CC       net.o
In file included from net.c:13:0:
/usr/include/linux/if.h:71:2: error: redeclaration of enumerator ‘IFF_UP’
  IFF_UP    = 1<<0,  /* sysfs */
  ^
/usr/include/net/if.h:44:5: note: previous definition of ‘IFF_UP’ was here
     IFF_UP = 0x1,  /* Interface is up.  */

The issue was fixed in kernel headers in [1], but since compilation
of net.c picks up system headers the problem can recur.

Dropping #include <linux/if.h> resolves the issue and it is
not needed for compilation anyhow.

[1] https://lore.kernel.org/netdev/1461512707-23058-1-git-send-email-mikko.rapeli__34748.27880641$1462831734$gmane$org@iki.fi/

Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1609948746-15369-1-git-send-email-alan.maguire@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/intel: Fix memleak in intel_irq_remapping_alloc

commit ff2b46d7cff80d27d82f7f3252711f4ca1666129 upstream.

When irq_domain_get_irq_data() or irqd_cfg() fails
at i == 0, data allocated by kzalloc() has not been
freed before returning, which leads to memleak.

Fixes: b106ee63abcc ("irq_remapping/vt-d: Enhance Intel IR driver to support hierarchical irqdomains")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210105051837.32118-1-dinghao.liu@zju.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb()

commit 1efd17e7acb6692bffc6c58718f41f27fdfd62f5 upstream.

Use IS_ALIGNED() instead. Otherwise, an unaligned address will be ignored.

Fixes: 33cd6e642d6a ("iommu/vt-d: Flush PASID-based iotlb for iova over first level")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201231005323.2178523-1-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zonefs: select CONFIG_CRC32

commit 4f8b848788f77c7f5c3bd98febce66b7aa14785f upstream.

When CRC32 is disabled, zonefs cannot be linked:

ld: fs/zonefs/super.o: in function `zonefs_fill_super':

Add a Kconfig 'select' statement for it.

Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: select CONFIG_CRC32

commit 19cd3403cb0d522dd5e10188eef85817de29e26e upstream.

Without CRC32 support, this fails to link:

arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init':
pblk-init.c:(.text+0x2654): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit':
pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le'

Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: rsxx: select CONFIG_CRC32

commit 36a106a4c1c100d55ba3d32a21ef748cfcd4fa99 upstream.

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config':
config.c:(.text+0x124): undefined reference to `crc32_le'

Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wil6210: select CONFIG_CRC32

commit e186620d7bf11b274b985b839c38266d7918cc05 upstream.

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow

Fixes: 151a9706503f ("wil6210: firmware download")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: dp83640: select CONFIG_CRC32

commit f9d6f94132f01d2a552dcbab54fa56496638186d upstream.

Without crc32, this driver fails to link:

arm-linux-gnueabi-ld: drivers/net/phy/dp83640.o: in function `match':
dp83640.c:(.text+0x476c): undefined reference to `crc32_le'

Fixes: 539e44d26855 ("dp83640: Include hash in timestamp/packet matching")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: select CONFIG_CRC32

commit 2860d45a589818dd8ffd90cdc4bcf77f36a5a6be upstream.

Without this, the driver fails to link:

lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump':
qed_debug.c:(.text+0x4068): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump':
qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump':
qed_debug.c:(.text+0x6000): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump':
qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow

Fixes: 7a4b21b7d1f0 ("qed: Add nvram selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA

commit 095507dc1350b3a2b8b39fdc05edba0c10859eca upstream.

Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and
!CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The
limit will default to ~0ULL, effectively spanning the whole memory,
which is too high for a configuration that expects low memory to be
capped at 4GB.

Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit
when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour
CONFIG_ZONE_DMA32, or span the entire memory when not enabled.

Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201218163307.10150-1-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: xilinx_dma: fix mixed_enum_type coverity warning

commit 2d5efea64472469117dc1a9a39530069e95b21e9 upstream.

Typecast the fls(width -1) with (enum dmaengine_alignment) in
xilinx_dma_chan_probe function to fix the coverity warning.

Addresses-Coverity: Event mixed_enum_type.
Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()

commit faeb0731be0a31e2246b21a85fa7dabbd750101d upstream.

In xilinx_dma_child_probe function, the nr_channels variable is
passed to of_property_read_u32() which expects an u32 return value
pointer. Modify the nr_channels variable type from int to u32 to
fix the incompatible parameter coverity warning.

Addresses-Coverity: Event incompatible_param.
Fixes: 1a9e7a03c761 ("dmaengine: vdma: Add support for mulit-channel dma mode")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: xilinx_dma: check dma_async_device_register return value

commit 99974aedbd73523969afb09f33c6e3047cd0ddae upstream.

dma_async_device_register() can return non-zero error code. Add
condition to check the return value of dma_async_device_register
function and handle the error path.

Addresses-Coverity: Event check_return.
Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: milbeaut-xdmac: Fix a resource leak in the error handling path of the probe function

commit d645148cc82ca7fbacaa601414a552184e9c6dd3 upstream.

'disable_xdmac()' should be called in the error handling path of the
probe function to undo a previous 'enable_xdmac()' call, as already
done in the remove function.

Fixes: a6e9be055d47 ("dmaengine: milbeaut-xdmac: Add XDMAC driver for Milbeaut platforms")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201219132800.183254-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function

commit 33cbd54dc515cc04b5a603603414222b4bb1448d upstream.

'mtk_hsdma_hw_deinit()' should be called in the error handling path of the
probe function to undo a previous 'mtk_hsdma_hw_init()' call, as already
done in the remove function.

Fixes: 548c4597e984 ("dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201219124718.182664-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: fix rpmh link failures

commit 512d4a26abdbd11c6ffa03032740e5ab3c62c55b upstream.

When CONFIG_COMPILE_TEST is set, it is possible to build some
of the interconnect drivers into the kernel while their dependencies
are loadable modules, which is bad:

arm-linux-gnueabi-ld: drivers/interconnect/qcom/bcm-voter.o: in function `qcom_icc_bcm_voter_commit':
(.text+0x1f8): undefined reference to `rpmh_invalidate'
arm-linux-gnueabi-ld: (.text+0x20c): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: (.text+0x2b0): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: (.text+0x2e8): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: drivers/interconnect/qcom/icc-rpmh.o: in function `qcom_icc_bcm_init':
(.text+0x2ac): undefined reference to `cmd_db_read_addr'
arm-linux-gnueabi-ld: (.text+0x2c8): undefined reference to `cmd_db_read_aux_data'

The exact dependencies are a bit complicated, so split them out into a
hidden Kconfig symbol that all drivers can in turn depend on to get it
right.

Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201204165030.3747484-1-arnd@kernel.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>