iommu/vt-d: Use memunmap to free memremap

[ Upstream commit 829383e183728dec7ed9150b949cd6de64127809 ]

memunmap() should be used to free the return of memremap(), not
iounmap().

Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap')
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts

[ Upstream commit 426a593e641ebf0d9288f0a2fcab644a86820220 ]

In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.

In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".

[V2]
Remove unnecessary curly braces.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: fix warning in arch/riscv/include/asm/module.h

[ Upstream commit 0138ebb90c633f76bc71617f8f23635ce41c84fd ]

Fixes warning: 'struct module' declared inside parameter list will not be
visible outside of this definition or declaration

Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ibmnvic: Fix deadlock problem in reset

[ Upstream commit a5681e20b541a507c7d4fd48ae4a4040d32ee1ef ]

This patch changes to use rtnl_lock only during a reset to avoid
deadlock that could occur when a thread operating close is holding
rtnl_lock and waiting for reset_lock acquired by another thread,
which is waiting for rtnl_lock in order to set the number of tx/rx
queues during a reset.

Also, we now setting the number of tx/rx queues during a soft reset
for failover or LPM events.

Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix QM getters to always return a valid pq

[ Upstream commit eb62cca9bee842e5b23bd0ddfb1f271ca95e8759 ]

The getter callers doesn't know the valid Physical Queues (PQ) values.
This patch makes sure that a valid PQ will always be returned.

The patch consists of 3 fixes:

 - When qed_init_qm_get_idx_from_flags() receives a disabled flag, it
   returned PQ 0, which can potentially be another function's pq. Verify
   that flag is enabled, otherwise return default start_pq.

 - When qed_init_qm_get_idx_from_flags() receives an unknown flag, it
   returned NULL and could lead to a segmentation fault. Return default
   start_pq instead.

 - A modulo operation was added to MCOS/VFS PQ getters to make sure the
   PQ returned is in range of the required flag.

Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix bitmap_weight() check

[ Upstream commit 276d43f0ae963312c0cd0e2b9a85fd11ac65dfcc ]

Fix the condition which verifies that only one flag is set. The API
bitmap_weight() should receive size in bits instead of bytes.

Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix a NFSv4 state manager deadlock

[ Upstream commit aeabb3c96186a0f944fc2b1f25c84d5eb3a93fa9 ]

Fix a deadlock whereby the NFSv4 state manager can get stuck in the
delegation return code, waiting for a layout return to complete in
another thread. If the server reboots before that other thread
completes, then we need to be able to start a second state
manager thread in order to perform recovery.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: fix crash during failed resume from hibernation

[ Upstream commit e76ad21d070f79e566ac46ce0b0584c3c93e1b43 ]

During resume from hibernation if ena_restore_device fails,
ena_com_dev_reset() is called, and uses the readless read mechanism,
which was already destroyed by the call to
ena_com_mmio_reg_read_request_destroy(). This causes a NULL pointer
reference.

In this commit we switch the call order of the above two functions
to avoid this crash.

Fixes: d7703ddbd7c9 ("net: ena: fix rare bug when failed restart/resume is followed by driver removal")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: Fix Cadence QSPI page fault kernel panic

[ Upstream commit a6a66f80c85e8e20573ca03fabf32445954a88d5 ]

The current Cadence QSPI driver caused a kernel panic sporadically
when writing to QSPI. The problem was caused by writing more bytes
than needed because the QSPI operated on 4 bytes at a time.
<snip>
[   11.202044] Unable to handle kernel paging request at virtual address bffd3000
[   11.209254] pgd = e463054d
[   11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000
[   11.218202] Internal error: Oops: 7 [#1] SMP ARM
[   11.222797] Modules linked in:
[   11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f
[   11.235796] Hardware name: Altera SOCFPGA Arria10
[   11.240487] PC is at __raw_writesl+0x70/0xd4
[   11.244741] LR is at cqspi_write+0x1a0/0x2cc
</snip>
On a page boundary limit the number of bytes copied from the tx buffer
to remain within the page.

This patch uses a temporary buffer to hold the 4 bytes to write and then
copies only the bytes required from the tx buffer.

Reported-by: Adrian Amborzewicz <adrian.ambrozewicz@intel.com>
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: Add pointstick support for Cirque Touchpad

[ Upstream commit 12d43aacf9a74d0eb66fd0ea54ebeb79ca28940f ]

Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires
MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "HID: uhid: use strlcpy() instead of strncpy()"

[ Upstream commit 4d26d1d1e8065bb3326a7c06d5d4698e581443a9 ]

This reverts commit 336fd4f5f25157e9e8bd50e898a1bbcd99eaea46.

Please note that `strlcpy()` does *NOT* do what you think it does.
strlcpy() *ALWAYS* reads the full input string, regardless of the
'length' parameter. That is, if the input is not zero-terminated,
strlcpy() will *READ* beyond input boundaries. It does this, because it
always returns the size it *would* copy if the target was big enough,
not the truncated size it actually copied.

The original code was perfectly fine. The hid device is
zero-initialized and the strncpy() functions copied up to n-1
characters. The result is always zero-terminated this way.

This is the third time someone tried to replace strncpy with strlcpy in
this function, and gets it wrong. I now added a comment that should at
least make people reconsider.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: ti-cpufreq: Only register platform_device when supported

[ Upstream commit d98ccfc3948ab63152494bb6b9c17e15295c0310 ]

Currently the ti-cpufreq driver blindly registers a 'ti-cpufreq' to force
the driver to probe on any platforms where the driver is built in.
However, this should only happen on platforms that actually can make use
of the driver. There is already functionality in place to match the
SoC compatible so let's factor this out into a separate call and
make sure we find a match before creating the ti-cpufreq platform device.

Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: qcom: Namespace prefix some commands

[ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ]

PAGE_READ is used by RISC-V arch code included through mm headers,
and it makes sense to bring in a prefix on these in the driver.

drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined
 #define PAGE_READ   0x2
In file included from include/linux/memremap.h:7,
                 from include/linux/mm.h:27,
                 from include/linux/scatterlist.h:8,
                 from include/linux/dma-mapping.h:11,
                 from drivers/mtd/nand/raw/qcom_nandc.c:17:
arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition

Caught by riscv allmodconfig.

Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tc-testing: tdc.py: Guard against lack of returncode in executed command

[ Upstream commit c6cecf4ae44e4ce9158ef8806358142c3512cd33 ]

Add some defensive coding in case one of the subprocesses created by tdc
returns nothing. If no object is returned from exec_cmd, then tdc will
halt with an unhandled exception.

Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tc-testing: tdc.py: ignore errors when decoding stdout/stderr

[ Upstream commit 5aaf6428526bcad98d6f51f2f679c919bb75d7e9 ]

Prevent exceptions from being raised while decoding output
from an executed command. There is no impact on tdc's
execution and the verify command phase would fail the pattern
match.

Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mockup: fix indicated direction

[ Upstream commit bff466bac59994cfcceabe4d0be5fdc1c20cd5b8 ]

Commit 3edfb7bd76bd ("gpiolib: Show correct direction from the
beginning") fixed an existing issue but broke libgpiod tests by
changing the default direction of dummy lines to output.

We don't break user-space so make gpio-mockup behave as before.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pxa: fix legacy non pinctrl aware builds again

[ Upstream commit 70cdb6ad6dc342d9643a00c9092e88f0075f2b9a ]

As pointed out by Gregor, spitz keyboard matrix is broken, with or
without CONFIG_PINCTRL set, quoting :
"The gpio matrix keypard on the Zaurus C3x00 (see spitz.c) does not work
properly. Noticeable are that rshift+c does nothing where as lshift+c
creates C.  Opposite it is for rshift+a vs lshift+a, here only rshift
works. This affects a few other combinations using the rshift or lshift
buttons."

As a matter of fact, as for platform_data based builds CONFIG_PINCTRL=n
is required for now (as opposed for devicetree builds where it should be
set), this means gpio driver should change the direction, which is what
was attempted by commit c4e5ffb6f224 ("gpio: pxa: fix legacy non pinctrl
aware builds").

Unfortunately, the input case was inverted, and the direction change was
never done. This wasn't seen up until now because the initial platform
setup (MFP) was setting this direction. Yet in Gregory's case, the
matrix-keypad driver changes back and forth the direction dynamically,
and this is why he's the first to report it.

Fixes: c4e5ffb6f224 ("gpio: pxa: fix legacy non pinctrl aware builds")
Tested-by: Greg <greguu@null.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo

[ Upstream commit a97b9565338350d70d8d971c4ee6f0d4fa967418 ]

Add missing semicolon.

Fixes: 291d57f67d244973 ("qed: Fix rdma_info structure allocation")
Cc: Michal Kalderon <michal.kalderon@cavium.com>
Cc: Denis Bolotin <denis.bolotin@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4: Fix UBSAN warning of signed integer overflow

[ Upstream commit a463146e67c848cbab5ce706d6528281b7cded08 ]

UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow: 1802201963 + 1802201963 cannot be represented
in type 'int'

The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative.  Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.

Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_core: Fix uninitialized variable compilation warning

[ Upstream commit 3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 ]

Initialize the uid variable to zero to avoid the compilation warning.

Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command

[ Upstream commit bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ]

When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.

This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).

The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).

Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.

Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Support amdgpu "max bpc" connector property (v2)

[ Upstream commit 07e3a1cfb0568b6d8d7862077029af96af6690ea ]

[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch adds support for getting and setting the amdgpu driver
specific "max bpc" property on the connector.

It also adds support for limiting the output bpc based on the property
value. The default limitation is the lowest value in the range, 8bpc.
This was the old value before the range was uncapped.

This patch should be updated/replaced later once common drm support
for max bpc lands.

Bugzilla: https://bugs.freedesktop.org/108542
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645
Fixes: e03fd3f300f6 ("drm/amd/display: Do not limit color depth to 8bpc")

v2: rebase on upstream (Alex)

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Add amdgpu "max bpc" connector property (v2)

[ Upstream commit 69756c6ff0de478c10100481f16c966dde3b5339 ]

[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch introduces the "max bpc" amdgpu driver specific connector
property so the user can limit the maximum bpc. It ranges from 8 to 16.

This doesn't directly set the preferred bpc for the panel since it
follows Intel's existing driver conventions.

This proprety should be removed once common drm support for max bpc
lands.

v2: rebase on upstream (Alex)

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix filling time in bnxt_fill_coredump_record()

[ Upstream commit 8dc5ae2d48976764cf3498e97963fa06befefb0e ]

Fix the year and month offset while storing it in
bnxt_fill_coredump_record().

Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fc: resolve io failures during connect

[ Upstream commit 4cff280a5fccf6513ed9e895bb3a4e7ad8b0cedc ]

If an io error occurs on an io issued while connecting, recovery
of the io falls flat as the state checking ends up nooping the error
handler.

Create an err_work work item that is scheduled upon an io error while
connecting. The work thread terminates all io on all queues and marks
the queues as not connected.  The termination of the io will return
back to the callee, which will then back out of the connection attempt
and will reschedule, if possible, the connection attempt.

The changes:
- in case there are several commands hitting the error handler, a
  state flag is kept so that the error work is only scheduled once,
  on the first error. The subsequent errors can be ignored.
- The calling sequence to stop keep alive and terminate the queues
  and their io is lifted from the reset routine. Made a small
  service routine used by both reset and err_work.
- During debugging, found that the teardown path can reference
  an uninitialized pointer, resulting in a NULL pointer oops.
  The aen_ops weren't initialized yet. Add validation on their
  initialization before calling the teardown routine.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/ism: clear dmbe_mask bit before SMC IRQ handling

[ Upstream commit 007b656851ed7f94ba0fa358ac3e5d7705da6846 ]

SMC-D stress workload showed connection stalls. Since the firmware
decides to skip raising an interrupt if the SBA DMBE mask bit is
still set, this SBA DMBE mask bit should be cleared before the
IRQ handling in the SMC code runs. Otherwise there are small windows
possible with missing interrupts for incoming data.
SMC-D currently does not care about the old value of the SBA DMBE
mask.

Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"

[ Upstream commit a9c859033f6ec772f8e3228c343bb1321584ae0e ]

This reverts commit b4194da3f9087dd38d91b40f9bec42d59ce589a8
since it causes list corruption followed by kernel panic:

Workqueue: adb ffs_aio_cancel_worker
RIP: 0010:__list_add_valid+0x4d/0x70
Call Trace:
insert_work+0x47/0xb0
__queue_work+0xf6/0x400
queue_work_on+0x65/0x70
dwc3_gadget_giveback+0x44/0x50 [dwc3]
dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3]
? finish_wait+0x80/0x80
usb_ep_dequeue+0x1e/0x90
process_one_work+0x18c/0x3b0
worker_thread+0x3c/0x390
? process_one_work+0x3b0/0x3b0
kthread+0x11e/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50

This issue is seen with warm reboot stability testing.

Signed-off-by: Shen Jing <jingx.shen@intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: pci: Fix an error code in probe

[ Upstream commit 3c135e8900199e3b9375c1eff808cceba2ee37de ]

We added some error handling to this function but forgot to set the
error code on this path.

Fixes: ecd29dabb2ba ("usb: dwc2: pci: Handle error cleanup in probe")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix reading wrong value in loop condition

[ Upstream commit ed4eac20dcffdad47709422e0cb925981b056668 ]

The value of "sb_index" is written by the hardware. Reading its value and
writing it to "index" must finish before checking the loop condition.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix rdma_info structure allocation

[ Upstream commit 291d57f67d2449737d1e370ab5b9a583818eaa0c ]

Certain flows need to access the rdma-info structure, for example dcbx
update flows. In some cases there can be a race between the allocation or
deallocation of the structure which was done in roce start / roce stop and
an asynchrounous dcbx event that tries to access the structure.
For this reason, we move the allocation of the rdma_info structure to be
similar to the iscsi/fcoe info structures which are allocated during device
setup.
We add a new field of "active" to the struct to define whether roce has
already been started or not, and this is checked instead of whether the
pointer to the info structure.

Fixes: 51ff17251c9c ("qed: Add support for RoCE hw init")
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix overriding offload_tc by protocols without APP TLV

[ Upstream commit e90202ed1cf9672c48a363c84a929932ebfe6fc0 ]

The TC received from APP TLV is stored in offload_tc, and should not be
set by protocols which did not receive an APP TLV. Fixed the condition
when overriding the offload_tc.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix PTT leak in qed_drain()

[ Upstream commit 9aaa4e8ba12972d674caeefbc5f88d83235dd697 ]

Release PTT before entering error flow.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnx2x: Assign unique DMAE channel number for FW DMAE transactions.

[ Upstream commit 77e461d14ed141253573eeeb4d34eccc51e38328 ]

Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW
uses this channel for DMAE operations (e.g., TIME_SYNC implementation).
Driver also uses the same channel 0 for DMAE operations for some of the PFs
(e.g., PF0 on Port0). This could lead to concurrent access to the DMAE
channel by FW and driver which is not legal. Hence need to assign unique
DMAE id for FW.
Currently following DMAE channels are used by the clients,
  MFW - OCBB/OCSD functionality uses DMAE channel 14/15
  Driver 0-3 and 8-11 (for PF dmae operations)
         4 and 12 (for stats requests)
Assigning unique dmae_id '13' to the FW.

Changes from previous version:
------------------------------
v2: Incorporated the review comments.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd/iommu: Fix Guest Virtual APIC Log Tail Address Register

[ Upstream commit ab99be4683d9db33b100497d463274ebd23bd67e ]

This register should have been programmed with the physical address
of the memory location containing the shadow tail pointer for
the guest virtual APIC log instead of the base address.

Fixes: 8bda0cfbdc1a  ('iommu/amd: Detect and initialize guest vAPIC log')
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: Expand merged fragment buffer for full packet

[ Upstream commit d7d8bbb40a5b1f682ee6589e212934f4c6b8ad60 ]

The complete size ("total_size") of the fragmented packet is stored in the
fragment header and in the size of the fragment chain. When the fragments
are ready for merge, the skbuff's tail of the first fragment is expanded to
have enough room after the data pointer for at least total_size. This means
that it gets expanded by total_size - first_skb->len.

But this is ignoring the fact that after expanding the buffer, the fragment
header is pulled by from this buffer. Assuming that the tailroom of the
buffer was already 0, the buffer after the data pointer of the skbuff is
now only total_size - len(fragment_header) large. When the merge function
is then processing the remaining fragments, the code to copy the data over
to the merged skbuff will cause an skb_over_panic when it tries to actually
put enough data to fill the total_size bytes of the packet.

The size of the skb_pull must therefore also be taken into account when the
buffer's tailroom is expanded.

Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

batman-adv: Use explicit tvlv padding for ELP packets

[ Upstream commit f4156f9656feac21f4de712fac94fae964c5d402 ]

The announcement messages of batman-adv COMPAT_VERSION 15 have the
possibility to announce additional information via a dynamic TVLV part.
This part is optional for the ELP packets and currently not parsed by the
Linux implementation. Still out-of-tree versions are using it to transport
things like neighbor hashes to optimize the rebroadcast behavior.

Since the ELP broadcast packets are smaller than the minimal ethernet
packet, it often has to be padded. This is often done (as specified in
RFC894) with octets of zero and thus work perfectly fine with the TVLV
part (making it a zero length and thus empty). But not all ethernet
compatible hardware seems to follow this advice. To avoid ambiguous
situations when parsing the TVLV header, just force the 4 bytes (TVLV
length + padding) after the required ELP header to zero.

Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: input: Ignore battery reported by Symbol DS4308

[ Upstream commit 0fd791841a6d67af1155a9c3de54dea51220721e ]

The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner
which does not have a battery, but reports one anyway that always has
capacity 2.

Let's apply the IGNORE quirk to prevent it from being treated like a
power supply so that userspaces don't get confused that this
accessory is almost out of power and warn the user that they need to charge
their wired barcode scanner.

Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720

Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

test_firmware: fix error return getting clobbered

[ Upstream commit 8bb0a88600f0267cfcc245d34f8c4abe8c282713 ]

In the case where eq->fw->size > PAGE_SIZE the error return rc
is being set to EINVAL however this is being overwritten to
rc = req->fw->size because the error exit path via label 'out' is
not being taken.  Fix this by adding the jump to the error exit
path 'out'.

Detected by CoverityScan, CID#1453465 ("Unused value")

Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: rcar_can: Fix erroneous registration

[ Upstream commit 68c8d209cd4337da4fa04c672f0b62bb735969bc ]

Assigning 2 to "renesas,can-clock-select" tricks the driver into
registering the CAN interface, even though we don't want that.
This patch improves one of the checks to prevent that from happening.

Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: ucan: remove set but not used variable 'udev'

[ Upstream commit 207681fc5f3d5d398f106d1ae0080fc2373f707a ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/can/usb/ucan.c: In function 'ucan_disconnect':
drivers/net/can/usb/ucan.c:1578:21: warning:
 variable 'udev' set but not used [-Wunused-but-set-variable]
  struct usb_device *udev;

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC

[ Upstream commit 8e4829c6f7470722c1f5a1dc5769ebe09ef036d6 ]

Hynix ufs has deviations on hi36xx platform which will result in ufs bursts
transfer failures.

To fix the problem, the Hynix device must set the register
VS_DebugSaveConfigTime to 0x10, which will set time reference for
SaveConfigTime is 250 ns. The time reference for SaveConfigTime is 40 ns by
default.

This patch is necessary to boot on HiKey960 boards that use Hynix UFS chips
(H28U62301AMR model: hB8aL1).

Cc: Vinayak Holikatti <vinholikatti@gmail.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Wei Li <liwei213@huawei.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
[jstultz: Forward ported from older code, slight tweak to commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/ipmmu-vmsa: Fix crash on early domain free

[ Upstream commit e5b78f2e349eef5d4fca5dc1cf5a3b4b2cc27abd ]

If iommu_ops.add_device() fails, iommu_ops.domain_free() is still
called, leading to a crash, as the domain was only partially
initialized:

    ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables
    sata_rcar ee300000.sata: Unable to initialize IPMMU context
    iommu: Failed to add device ee300000.sata to group 0: -22
    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
    ...
    Call trace:
     ipmmu_domain_free+0x1c/0xa0
     iommu_group_release+0x48/0x68
     kobject_put+0x74/0xe8
     kobject_del.part.0+0x3c/0x50
     kobject_put+0x60/0xe8
     iommu_group_get_for_dev+0xa8/0x1f0
     ipmmu_add_device+0x1c/0x40
     of_iommu_configure+0x118/0x190

Fix this by checking if the domain's context already exists, before
trying to destroy it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: d25a2a16f0889 ('iommu: Add driver for Renesas VMSA-compatible IPMMU')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: fix building without CONFIG_LEDS_CLASS

[ Upstream commit b374e8686fc35ae124e62dc78725ea656ba1ef8a ]

When CONFIG_LEDS_CLASS is disabled, or it is a loadable module while
mt76 is built-in, we run into a link error:

drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_register_device':
mac80211.c:(.text+0xb78): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_of_led_classdev_register'

We don't really need a hard dependency here as the driver can presumably
work just fine without LEDs, so this follows the iwlwifi example and
adds a separate Kconfig option for the LED support, this will be available
whenever it will link, and otherwise the respective code gets left out from
the driver object.

Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmutil: really fix decoding channel info for 160 MHz bandwidth

[ Upstream commit 3401d42c7ea2d064d15c66698ff8eb96553179ce ]

Previous commit /adding/ support for 160 MHz chanspecs was incomplete.
It didn't set bandwidth info and didn't extract control channel info. As
the result it was also using uninitialized "sb" var.

This change has been tested for two chanspecs found to be reported by
some devices/firmwares:
1) 60/160 (0xee32)
   Before: chnum:50 control_ch_num:36
    After: chnum:50 control_ch_num:60
2) 120/160 (0xed72)
   Before: chnum:114 control_ch_num:100
    After: chnum:114 control_ch_num:120

Fixes: 330994e8e8ec ("brcmfmac: fix for proper support of 160MHz bandwidth")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()

[ Upstream commit 19ed3e2dd8549c1a34914e8dad01b64e7837645a ]

When handling page request without pasid event, go to "no_pasid"
branch instead of "bad_req". Otherwise, a NULL pointer deference
will happen there.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: a222a7f0bb6c9 'iommu/vt-d: Implement page request handling'
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ipu3-cio2: Unregister device nodes first, then release resources

[ Upstream commit 32388d6ef7cffc7d8291b67f8dfa26acd45217fd ]

While there are issues related to object lifetime management, unregister
the media device first, followed immediately by other device nodes when
the driver is being unbound. Only then the resources needed by the driver
may be released. This is slightly safer.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: omap3isp: Unregister media device as first

[ Upstream commit 30efae3d789cd0714ef795545a46749236e29558 ]

While there are issues related to object lifetime management, unregister the
media device first when the driver is being unbound. This is slightly
safer.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec: check for non-OK/NACK conditions while claiming a LA

[ Upstream commit 55623b4169056d7bb493d1c6f715991f8db67302 ]

During the configuration phase of a CEC adapter it is trying to claim a
free logical address by polling.

However, the code doesn't check if there were errors other than OK or NACK,
those are just treated as if the poll was NACKed.

Instead check for such errors and retry the poll. And if the problem persists
then don't claim this LA since there is something weird going on.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vicodec: lower minimum height to 360

[ Upstream commit 7cf7b2e977abf3f992036939e35a8eab60013aff ]

Lower the minimum height to 360 to be consistent with the webcam input of vivid.

The 480 was rather arbitrary but it made it harder to use vivid as a source for
encoding since the default resolution when you load vivid is 640x360.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.8

blk-mq: punt failed direct issue to dispatch list

commit c616cbee97aed4bc6178f148a7240206dcdb85a6 upstream.

After the direct dispatch corruption fix, we permanently disallow direct
dispatch of non read/write requests. This works fine off the normal IO
path, as they will be retried like any other failed direct dispatch
request. But for the blk_insert_cloned_request() that only DM uses to
bypass the bottom level scheduler, we always first attempt direct
dispatch. For some types of requests, that's now a permanent failure,
and no amount of retrying will make that succeed. This results in a
livelock.

Instead of making special cases for what we can direct issue, and now
having to deal with DM solving the livelock while still retaining a BUSY
condition feedback loop, always just add a request that has been through
->queue_rq() to the hardware queue dispatch list. These are safe to use
as no merging can take place there. Additionally, if requests do have
prepped data from drivers, we aren't dependent on them not sharing space
in the request structure to safely add them to the IO scheduler lists.

This basically reverts ffe81d45322c and is based on a patch from Ming,
but with the list insert case covered as well.

Fixes: ffe81d45322c ("blk-mq: fix corruption with direct issue")
Cc: stable@vger.kernel.org
Suggested-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: use destination length for copy string

commit 29e270fc32192e7729057963ae7120663856c93e upstream.

Got below warning with gcc 8.2 compiler.

net/tipc/topsrv.c: In function ‘tipc_topsrv_start’:
net/tipc/topsrv.c:660:2: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
  strncpy(srv->name, name, strlen(name) + 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/topsrv.c:660:27: note: length computed here
  strncpy(srv->name, name, strlen(name) + 1);
                           ^~~~~~~~~~~~
So change it to correct length and use strscpy.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: [devboards] Add support of NFSv3 ACL

commit 6b04114f6fae5e84d33404c2970b1949c032546e upstream.

By default NFSv3 doesn't support ACL (Access Control Lists)
which might be quite convenient to have so that
mounted NFS behaves exactly as any other local file-system.

In particular missing support of ACL makes umask useless.
This among other thigs fixes Glibc's "nptl/tst-umask1".

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: stable@vger.kernel.org #4.14+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: change defconfig defaults to ARCv2

commit b7cc40c32a8bfa6f2581a71747f6a7d491fe43ba upstream.

Change the default defconfig (used with 'make defconfig') to the ARCv2
nsim_hs_defconfig, and also switch the default Kconfig ISA selection to
ARCv2.

This allows several default defconfigs (e.g. make defconfig, make
allnoconfig, make tinyconfig) to all work with ARCv2 by default.

Note since we change default architecture from ARCompact to ARCv2
it's required to explicitly mention architecture type in ARCompact
defconfigs otherwise ARCv2 will be implied and binaries will be
generated for ARCv2.

Cc: <stable@vger.kernel.org> # 4.4.x
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: tree-checker: Don't check max block group size as current max chunk size limit is unreliable

commit 10950929e994c5ecee149ff0873388d3c98f12b5 upstream.

[BUG]
A completely valid btrfs will refuse to mount, with error message like:
  BTRFS critical (device sdb2): corrupt leaf: root=2 block=239681536 slot=172 \
    bg_start=12018974720 bg_len=10888413184, invalid block group size, \
    have 10888413184 expect (0, 10737418240]

This has been reported several times as the 4.19 kernel is now being
used. The filesystem refuses to mount, but is otherwise ok and booting
4.18 is a workaround.

Btrfs check returns no error, and all kernels used on this fs is later
than 2011, which should all have the 10G size limit commit.

[CAUSE]
For a 12 devices btrfs, we could allocate a chunk larger than 10G due to
stripe stripe bump up.

__btrfs_alloc_chunk()
|- max_stripe_size = 1G
|- max_chunk_size = 10G
|- data_stripe = 11
|- if (1G * 11 > 10G) {
       stripe_size = 976128930;
       stripe_size = round_up(976128930, SZ_16M) = 989855744

However the final stripe_size (989855744) * 11 = 10888413184, which is
still larger than 10G.

[FIX]
For the comprehensive check, we need to do the full check at chunk read
time, and rely on bg <-> chunk mapping to do the check.

We could just skip the length check for now.

Fixes: fce466eab7ac ("btrfs: tree-checker: Verify block_group_item")
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add support for ELAN0621 touchpad

commit bf87ade0dd7f8cf19dac4d3161d5e86abe0c062b upstream.

Added the ability to detect the ELAN0621 touchpad found in some Lenovo
laptops.

Signed-off-by: Adam Wong <adam@adamwong.me>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR

commit ad33429cd02565c28404bb16ae7a4c2bdfda6626 upstream.

Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15ARR.

Signed-off-by: Noah Westervelt <nwestervelt@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ELAN0620 to the ACPI table

commit 3ed64da3b790be7c63601e8ca6341b7dff74a660 upstream.

Add ELAN0620 to the ACPI table to support the elan touchpad in
the Lenovo IdeaPad 130-15IKB.

Signed-off-by: Patrick Gaskin <patrick@pgaskin.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: cros_ec_keyb - fix button/switch capability reports

commit ac5722c1643a2fb75224c79b578214956d34f989 upstream.

The cros_ec_keyb_bs array lists buttons and switches together, expecting
that its users will match the appropriate type and bit fields. But
cros_ec_keyb_register_bs() only checks the 'bit' field, which causes
misreported input capabilities in some cases. For example, tablets
(e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID
capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to
share the same bit.

(This has comedic effect on a tablet, in which a power-management daemon
then thinks this "lid" is closed, and so puts the system to sleep as
soon as it boots!)

To fix this, check both the 'ev_type' and 'bit' fields before reporting
the capability.

Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid
(Scarlet / Acer Chromebook Tab 10).

This error got introduced when porting the feature from the downstream
Chromium OS kernel to be upstreamed.

Fixes: cdd7950e7aa4 ("input: cros_ec_keyb: Add non-matrix buttons and switches")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: matrix_keypad - check for errors from of_get_named_gpio()

commit d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream.

"of_get_named_gpio()" returns a negative error value if it fails
and drivers should check for this. This missing check was now
added to the matrix_keypad driver.

In my case "of_get_named_gpio()" returned -EPROBE_DEFER because
the referenced GPIOs belong to an I/O expander, which was not yet
probed at the point in time when the matrix_keypad driver was
loading. Because the driver did not check for errors from the
"of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER"
is actually a GPIO number and continued as usual, which led to further
errors like this later on:

WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114
gpio_to_desc+0xc8/0xd0
invalid GPIO -517

Note that the "GPIO number" -517 in the error message above is
actually "-EPROBE_DEFER".

As part of the patch a misleading error message "no platform data defined"
was also removed. This does not lead to information loss because the other
error paths in matrix_keypad_parse_dt() already print an error.

Signed-off-by: Christian Hoff <christian_hoff@gmx.net>
Suggested-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - add PNP ID for ThinkPad P50 to SMBus

commit 9df39bedbf292680655c6a947c77d6562c693d4a upstream.

Noticed the other day the trackpoint felt different on my P50, then
realized it was because rmi4 wasn't loading for this machine
automatically. Suspend/resume, hibernate, and everything else seem to
work perfectly fine on here.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - quirk all PDP Xbox One gamepads

commit a6754fae1e66e9a40fed406290d7ca3f2b4d227c upstream.

Since we continue to find tons of new variants [0,1,2,3,4,5,6] that
need the PDP quirk, let's just quirk all devices from PDP.

[0]: https://github.com/paroj/xpad/pull/104
[1]: https://github.com/paroj/xpad/pull/105
[2]: https://github.com/paroj/xpad/pull/108
[3]: https://github.com/paroj/xpad/pull/109
[4]: https://github.com/paroj/xpad/pull/112
[5]: https://github.com/paroj/xpad/pull/115
[6]: https://github.com/paroj/xpad/pull/116

Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: fix block guard enablement on SLI3 adapters

commit dfb7513374c1f8e7cd595106fbdba3fd07ebaf30 upstream.

Since f44ac12f1dcc, BG enablement is tracked with the LPFC_SLI3_BG_ENABLED
bit, which is set in lpfc_get_cfgparam before lpfc_sli_config_sli_port() is
called. The bit shouldn't be cleared before checking the feature.  Based on
problem analysis by David Bond.

Fixes: f44ac12f1dcc "scsi: lpfc: Memory allocation error during driver start-up on power8"
Tested-by: David Bond <dbond@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Cc: stable@vger.kernel.org # 4.17.x
Cc: stable@vger.kernel.org # 4.18.x
Cc: stable@vger.kernel.org # 4.19.x
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix deletion of MAC filters

commit eab077aa84331afbda071a213925d4cdbca58941 upstream.

In __i40e_del_filter function, the flag __I40E_MACVLAN_SYNC_PENDING for
the PF state is wrongly set for the VSI. Deleting any of the MAC filters
has caused the incorrect syncing for the PF. Fix it by setting this state
flag to the intended PF.

CC: stable <stable@vger.kernel.org>
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: add support for RTM_NEWCHAIN, RTM_DELCHAIN, and RTM_GETCHAIN

commit 598e1a42e9626213565d3b22ea948ce78556512a upstream.

Commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi")
added new RTM_* definitions without properly updating SELinux, this
patch adds the necessary SELinux support.

While there was a BUILD_BUG_ON() in the SELinux code to protect from
exactly this case, it was bypassed in the broken commit.  In order to
hopefully prevent this from happening in the future, add additional
comments which provide some instructions on how to resolve the
BUILD_BUG_ON() failures.

Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi")
Cc: <stable@vger.kernel.org> # 4.19
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svm: Add mutex_lock to protect apic_access_page_done on AMD systems

commit 30510387a5e45bfcf8190e03ec7aa15b295828e2 upstream.

There is a race condition when accessing kvm->arch.apic_access_page_done.
Due to it, x86_set_memory_region will fail when creating the second vcpu
for a svm guest.

Add a mutex_lock to serialize the accesses to apic_access_page_done.
This lock is also used by vmx for the same purpose.

Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Amadeusz Juskowiak <ajusk@amazon.de>
Signed-off-by: Julian Stecklina <jsteckli@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kgdboc: Fix warning with module build

commit 1cd25cbb2fedbc777f3a8c3cb1ba69b645aeaa64 upstream.

After 2dd453168643 ("kgdboc: Fix restrict error"), kgdboc_option_setup is
now only used when built in, resulting in a warning when compiled as a
module:

drivers/tty/serial/kgdboc.c:134:12: warning: 'kgdboc_option_setup' defined but not used [-Wunused-function]
 static int kgdboc_option_setup(char *opt)
            ^~~~~~~~~~~~~~~~~~~

Move the function under the appropriate ifdef for builtin only.

Fixes: 2dd453168643 ("kgdboc: Fix restrict error")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kgdboc: Fix restrict error

commit 2dd453168643d9475028cd867c57e65956a0f7f9 upstream.

There's an error when compiled with restrict:

drivers/tty/serial/kgdboc.c: In function ‘configure_kgdboc’:
drivers/tty/serial/kgdboc.c:137:2: error: ‘strcpy’ source argument is the same
as destination [-Werror=restrict]
  strcpy(config, opt);
  ^~~~~~~~~~~~~~~~~~~

As the error implies, this is from trying to use config as both source and
destination. Drop the call to the function where config is the argument
since nothing else happens in the function.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set

commit dcf7fe9d89763a28e0f43975b422ff141fe79e43 upstream.

Set the page dirty if VM_WRITE is not set because in such case the pte
won't be marked dirty and the page would be reclaimed without writepage
(i.e.  swapout in the shmem case).

This was found by source review.  Most apps (certainly including QEMU)
only use UFFDIO_COPY on PROT_READ|PROT_WRITE mappings or the app can't
modify the memory in the first place.  This is for correctness and it
could help the non cooperative use case to avoid unexpected data loss.

Link: http://lkml.kernel.org/r/20181126173452.26955-6-aarcange@redhat.com
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: shmem: add i_size checks

commit e2a50c1f64145a04959df2442305d57307e5395a upstream.

With MAP_SHARED: recheck the i_size after taking the PT lock, to
serialize against truncate with the PT lock.  Delete the page from the
pagecache if the i_size_read check fails.

With MAP_PRIVATE: check the i_size after the PT lock before mapping
anonymous memory or zeropages into the MAP_PRIVATE shmem mapping.

A mostly irrelevant cleanup: like we do the delete_from_page_cache()
pagecache removal after dropping the PT lock, the PT lock is a spinlock
so drop it before the sleepable page lock.

Link: http://lkml.kernel.org/r/20181126173452.26955-5-aarcange@redhat.com
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem

commit 5b51072e97d587186c2f5390c8c9c1fb7e179505 upstream.

Userfaultfd did not create private memory when UFFDIO_COPY was invoked
on a MAP_PRIVATE shmem mapping.  Instead it wrote to the shmem file,
even when that had not been opened for writing.  Though, fortunately,
that could only happen where there was a hole in the file.

Fix the shmem-backed implementation of UFFDIO_COPY to create private
memory for MAP_PRIVATE mappings.  The hugetlbfs-backed implementation
was already correct.

This change is visible to userland, if userfaultfd has been used in
unintended ways: so it introduces a small risk of incompatibility, but
is necessary in order to respect file permissions.

An app that uses UFFDIO_COPY for anything like postcopy live migration
won't notice the difference, and in fact it'll run faster because there
will be no copy-on-write and memory waste in the tmpfs pagecache
anymore.

Userfaults on MAP_PRIVATE shmem keep triggering only on file holes like
before.

The real zeropage can also be built on a MAP_PRIVATE shmem mapping
through UFFDIO_ZEROPAGE and that's safe because the zeropage pte is
never dirty, in turn even an mprotect upgrading the vma permission from
PROT_READ to PROT_READ|PROT_WRITE won't make the zeropage pte writable.

Link: http://lkml.kernel.org/r/20181126173452.26955-3-aarcange@redhat.com
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: use ENOENT instead of EFAULT if the atomic copy user fails

commit 9e368259ad988356c4c95150fafd1a06af095d98 upstream.

Patch series "userfaultfd shmem updates".

Jann found two bugs in the userfaultfd shmem MAP_SHARED backend: the
lack of the VM_MAYWRITE check and the lack of i_size checks.

Then looking into the above we also fixed the MAP_PRIVATE case.

Hugh by source review also found a data loss source if UFFDIO_COPY is
used on shmem MAP_SHARED PROT_READ mappings (the production usages
incidentally run with PROT_READ|PROT_WRITE, so the data loss couldn't
happen in those production usages like with QEMU).

The whole patchset is marked for stable.

We verified QEMU postcopy live migration with guest running on shmem
MAP_PRIVATE run as well as before after the fix of shmem MAP_PRIVATE.
Regardless if it's shmem or hugetlbfs or MAP_PRIVATE or MAP_SHARED, QEMU
unconditionally invokes a punch hole if the guest mapping is filebacked
and a MADV_DONTNEED too (needed to get rid of the MAP_PRIVATE COWs and
for the anon backend).

This patch (of 5):

We internally used EFAULT to communicate with the caller, switch to
ENOENT, so EFAULT can be used as a non internal retval.

Link: http://lkml.kernel.org/r/20181126173452.26955-2-aarcange@redhat.com
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut()

commit 97b2a3180a559a33852ac0cd77904166069484fd upstream.

Currently on driver bringup with KASAN enabled, meson triggers an OOB
memory access as shown below:

[  117.904528] ==================================================================
[  117.904560] BUG: KASAN: global-out-of-bounds in meson_viu_set_osd_lut+0x7a0/0x890
[  117.904588] Read of size 4 at addr ffff20000a63ce24 by task systemd-udevd/498
[  117.904601]
[  118.083372] CPU: 4 PID: 498 Comm: systemd-udevd Not tainted 4.20.0-rc3Lyude-Test+ #20
[  118.091143] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[  118.099768] Call trace:
[  118.102181]  dump_backtrace+0x0/0x3e8
[  118.105796]  show_stack+0x14/0x20
[  118.109083]  dump_stack+0x130/0x1c4
[  118.112539]  print_address_description+0x60/0x25c
[  118.117214]  kasan_report+0x1b4/0x368
[  118.120851]  __asan_report_load4_noabort+0x18/0x20
[  118.125566]  meson_viu_set_osd_lut+0x7a0/0x890
[  118.129953]  meson_viu_init+0x10c/0x290
[  118.133741]  meson_drv_bind_master+0x474/0x748
[  118.138141]  meson_drv_bind+0x10/0x18
[  118.141760]  try_to_bring_up_master+0x3d8/0x768
[  118.146249]  component_add+0x214/0x570
[  118.149978]  meson_dw_hdmi_probe+0x18/0x20 [meson_dw_hdmi]
[  118.155404]  platform_drv_probe+0x98/0x138
[  118.159455]  really_probe+0x2a0/0xa70
[  118.163070]  driver_probe_device+0x1b4/0x2d8
[  118.167299]  __driver_attach+0x200/0x280
[  118.171189]  bus_for_each_dev+0x10c/0x1a8
[  118.175144]  driver_attach+0x38/0x50
[  118.178681]  bus_add_driver+0x330/0x608
[  118.182471]  driver_register+0x140/0x388
[  118.186361]  __platform_driver_register+0xc8/0x108
[  118.191117]  meson_dw_hdmi_platform_driver_init+0x1c/0x1000 [meson_dw_hdmi]
[  118.198022]  do_one_initcall+0x12c/0x3bc
[  118.201883]  do_init_module+0x1fc/0x638
[  118.205673]  load_module+0x4b4c/0x6808
[  118.209387]  __se_sys_init_module+0x2e8/0x3c0
[  118.213699]  __arm64_sys_init_module+0x68/0x98
[  118.218100]  el0_svc_common+0x104/0x210
[  118.221893]  el0_svc_handler+0x48/0xb8
[  118.225594]  el0_svc+0x8/0xc
[  118.228429]
[  118.229887] The buggy address belongs to the variable:
[  118.235007]  eotf_33_linear_mapping+0x84/0xc0
[  118.239301]
[  118.240752] Memory state around the buggy address:
[  118.245522]  ffff20000a63cd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  118.252695]  ffff20000a63cd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  118.259850] >ffff20000a63ce00: 00 00 00 00 04 fa fa fa fa fa fa fa 00 00 00 00
[  118.267000]                                ^
[  118.271222]  ffff20000a63ce80: 00 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[  118.278393]  ffff20000a63cf00: 00 00 00 00 00 00 00 00 00 00 00 00 04 fa fa fa
[  118.285542] ==================================================================
[  118.292699] Disabling lock debugging due to kernel taint

It seems that when looping through the OSD EOTF LUT maps, we use the
same max iterator for OETF: 20. This is wrong though, since 20*2 is 40,
which means that we'll stop out of bounds on the EOTF maps.

But, this whole thing is already confusing enough to read through as-is,
so let's just replace all of the hardcoded sizes with
OSD_(OETF/EOTF)_LUT_SIZE / 2.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v4.10+
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181125012117.31915-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/meson: Enable fast_io in meson_dw_hdmi_regmap_config

commit 995b278e4723b26f8ebf0e7c119286d16c712747 upstream.

Seeing as we use this registermap in the context of our IRQ handlers, we
need to be using spinlocks for reading/writing registers so that we can
still read them from IRQ handlers without having to grab any mutexes and
accidentally sleep. We don't currently do this, as pointed out by
lockdep:

[   18.403770] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[   18.406744] in_atomic(): 1, irqs_disabled(): 128, pid: 68, name: kworker/u17:0
[   18.413864] INFO: lockdep is turned off.
[   18.417675] irq event stamp: 12
[   18.420778] hardirqs last  enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60
[   18.429510] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60
[   18.437345] softirqs last  enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50
[   18.446684] softirqs last disabled at (0): [<0000000000000000>]           (null)
[   18.453979] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G        W  O      4.20.0-rc3Lyude-Test+ #9
[   18.469839] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[   18.480037] Workqueue: hci0 hci_power_on [bluetooth]
[   18.487138] Call trace:
[   18.494192]  dump_backtrace+0x0/0x1b8
[   18.501280]  show_stack+0x14/0x20
[   18.508361]  dump_stack+0xbc/0xf4
[   18.515427]  ___might_sleep+0x140/0x1d8
[   18.522515]  __might_sleep+0x50/0x88
[   18.529582]  __mutex_lock+0x60/0x870
[   18.536621]  mutex_lock_nested+0x1c/0x28
[   18.543660]  regmap_lock_mutex+0x10/0x18
[   18.550696]  regmap_read+0x38/0x70
[   18.557727]  dw_hdmi_hardirq+0x58/0x138 [dw_hdmi]
[   18.564804]  __handle_irq_event_percpu+0xac/0x410
[   18.571891]  handle_irq_event_percpu+0x34/0x88
[   18.578982]  handle_irq_event+0x48/0x78
[   18.586051]  handle_fasteoi_irq+0xac/0x160
[   18.593061]  generic_handle_irq+0x24/0x38
[   18.599989]  __handle_domain_irq+0x60/0xb8
[   18.606857]  gic_handle_irq+0x50/0xa0
[   18.613659]  el1_irq+0xb4/0x130
[   18.620394]  debug_lockdep_rcu_enabled+0x2c/0x30
[   18.627111]  schedule+0x38/0xa0
[   18.633781]  schedule_timeout+0x3a8/0x510
[   18.640389]  wait_for_common+0x15c/0x180
[   18.646905]  wait_for_completion+0x14/0x20
[   18.653319]  mmc_wait_for_req_done+0x28/0x168
[   18.659693]  mmc_wait_for_req+0xa8/0xe8
[   18.665978]  mmc_wait_for_cmd+0x64/0x98
[   18.672180]  mmc_io_rw_direct_host+0x94/0x130
[   18.678385]  mmc_io_rw_direct+0x10/0x18
[   18.684516]  sdio_enable_func+0xe8/0x1d0
[   18.690627]  btsdio_open+0x24/0xc0 [btsdio]
[   18.696821]  hci_dev_do_open+0x64/0x598 [bluetooth]
[   18.703025]  hci_power_on+0x50/0x270 [bluetooth]
[   18.709163]  process_one_work+0x2a0/0x6e0
[   18.715252]  worker_thread+0x40/0x448
[   18.721310]  kthread+0x12c/0x130
[   18.727326]  ret_from_fork+0x10/0x1c
[   18.735555] ------------[ cut here ]------------
[   18.741430] do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000006265ec59>] wait_for_common+0x140/0x180
[   18.752417] WARNING: CPU: 0 PID: 68 at kernel/sched/core.c:6096 __might_sleep+0x7c/0x88
[   18.760553] Modules linked in: dm_mirror dm_region_hash dm_log dm_mod
btsdio bluetooth snd_soc_hdmi_codec dw_hdmi_i2s_audio ecdh_generic
brcmfmac brcmutil cfg80211 rfkill ir_nec_decoder meson_dw_hdmi(O)
dw_hdmi rc_geekbox meson_rng meson_ir ao_cec rng_core rc_core cec
leds_pwm efivars nfsd ip_tables x_tables crc32_generic f2fs uas
meson_gxbb_wdt pwm_meson efivarfs ipv6
[   18.799469] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G        W  O      4.20.0-rc3Lyude-Test+ #9
[   18.808858] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[   18.818045] Workqueue: hci0 hci_power_on [bluetooth]
[   18.824088] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[   18.829891] pc : __might_sleep+0x7c/0x88
[   18.835722] lr : __might_sleep+0x7c/0x88
[   18.841256] sp : ffff000008003cb0
[   18.846751] x29: ffff000008003cb0 x28: 0000000000000000
[   18.852269] x27: ffff00000938e000 x26: ffff800010283000
[   18.857726] x25: ffff800010353280 x24: ffff00000868ef50
[   18.863166] x23: 0000000000000000 x22: 0000000000000000
[   18.868551] x21: 0000000000000000 x20: 000000000000038c
[   18.873850] x19: ffff000008cd08c0 x18: 0000000000000010
[   18.879081] x17: ffff000008a68cb0 x16: 0000000000000000
[   18.884197] x15: 0000000000aaaaaa x14: 0e200e200e200e20
[   18.889239] x13: 0000000000000001 x12: 00000000ffffffff
[   18.894261] x11: ffff000008adfa48 x10: 0000000000000001
[   18.899517] x9 : ffff0000092a0158 x8 : 0000000000000000
[   18.904674] x7 : ffff00000812136c x6 : 0000000000000000
[   18.909895] x5 : 0000000000000000 x4 : 0000000000000001
[   18.915080] x3 : 0000000000000007 x2 : 0000000000000007
[   18.920269] x1 : 99ab8e9ebb6c8500 x0 : 0000000000000000
[   18.925443] Call trace:
[   18.929904]  __might_sleep+0x7c/0x88
[   18.934311]  __mutex_lock+0x60/0x870
[   18.938687]  mutex_lock_nested+0x1c/0x28
[   18.943076]  regmap_lock_mutex+0x10/0x18
[   18.947453]  regmap_read+0x38/0x70
[   18.951842]  dw_hdmi_hardirq+0x58/0x138 [dw_hdmi]
[   18.956269]  __handle_irq_event_percpu+0xac/0x410
[   18.960712]  handle_irq_event_percpu+0x34/0x88
[   18.965176]  handle_irq_event+0x48/0x78
[   18.969612]  handle_fasteoi_irq+0xac/0x160
[   18.974058]  generic_handle_irq+0x24/0x38
[   18.978501]  __handle_domain_irq+0x60/0xb8
[   18.982938]  gic_handle_irq+0x50/0xa0
[   18.987351]  el1_irq+0xb4/0x130
[   18.991734]  debug_lockdep_rcu_enabled+0x2c/0x30
[   18.996180]  schedule+0x38/0xa0
[   19.000609]  schedule_timeout+0x3a8/0x510
[   19.005064]  wait_for_common+0x15c/0x180
[   19.009513]  wait_for_completion+0x14/0x20
[   19.013951]  mmc_wait_for_req_done+0x28/0x168
[   19.018402]  mmc_wait_for_req+0xa8/0xe8
[   19.022809]  mmc_wait_for_cmd+0x64/0x98
[   19.027177]  mmc_io_rw_direct_host+0x94/0x130
[   19.031563]  mmc_io_rw_direct+0x10/0x18
[   19.035922]  sdio_enable_func+0xe8/0x1d0
[   19.040294]  btsdio_open+0x24/0xc0 [btsdio]
[   19.044742]  hci_dev_do_open+0x64/0x598 [bluetooth]
[   19.049228]  hci_power_on+0x50/0x270 [bluetooth]
[   19.053687]  process_one_work+0x2a0/0x6e0
[   19.058143]  worker_thread+0x40/0x448
[   19.062608]  kthread+0x12c/0x130
[   19.067064]  ret_from_fork+0x10/0x1c
[   19.071513] irq event stamp: 12
[   19.075937] hardirqs last  enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60
[   19.083560] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60
[   19.091401] softirqs last  enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50
[   19.100801] softirqs last disabled at (0): [<0000000000000000>]           (null)
[   19.108135] ---[ end trace 38c4920787b88c75 ]---

So, fix this by enabling the fast_io option in our regmap config so that
regmap uses spinlocks for locking instead of mutexes.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v4.12+
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124191238.28276-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/meson: Fixes for drm_crtc_vblank_on/off support

commit 2bcd3ecab773f73211c45bb1430bb52ac641f271 upstream.

Since Linux 4.17, calls to drm_crtc_vblank_on/off are mandatory, and we get
a warning when ctrc is disabled :
" driver forgot to call drm_crtc_vblank_off()"

But, the vsync IRQ was not totally disabled due the transient hardware
state and specific interrupt line, thus adding proper IRQ masking from
the HHI system control registers.

The last change fixes a race condition introduced by calling the added
drm_crtc_vblank_on/off when an HPD event occurs from the HDMI connector,
triggering a WARN_ON() in the _atomic_begin() callback when the CRTC
is disabled, thus also triggering a WARN_ON() in drm_vblank_put() :

WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/meson/meson_crtc.c:157 meson_crtc_atomic_begin+0x78/0x80
[...]
Call trace:
  meson_crtc_atomic_begin+0x78/0x80
  drm_atomic_helper_commit_planes+0x140/0x218
  drm_atomic_helper_commit_tail+0x38/0x80
  commit_tail+0x7c/0x80
  drm_atomic_helper_commit+0xdc/0x150
  drm_atomic_commit+0x54/0x60
  restore_fbdev_mode_atomic+0x198/0x238
  restore_fbdev_mode+0x6c/0x1c0
  drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xf0
  drm_fb_helper_set_par+0x34/0x60
  drm_fb_helper_hotplug_event.part.28+0xb8/0xc8
  drm_fbdev_client_hotplug+0xa4/0xe0
  drm_client_dev_hotplug+0x90/0xe0
  drm_kms_helper_hotplug_event+0x3c/0x48
  drm_helper_hpd_irq_event+0x134/0x168
  dw_hdmi_top_thread_irq+0x3c/0x50
[...]
WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/drm_vblank.c:1026 drm_vblank_put+0xb4/0xc8
[...]
 Call trace:
  drm_vblank_put+0xb4/0xc8
  drm_crtc_vblank_put+0x24/0x30
  drm_atomic_helper_wait_for_vblanks.part.9+0x130/0x2b8
  drm_atomic_helper_commit_tail+0x68/0x80
[...]

The issue is that vblank need to be enabled in any occurrence of :
- atomic_enable()
- atomic_begin() and state->enable == true, which was not the case

Moving the CRTC enable code to a common function and calling in one of
these occurrence solves this race condition and makes sure vblank is
enabled in each call to _atomic_begin() from the HPD event leading to
drm_atomic_helper_commit_planes().

To Summarize :
- Make sure that the CRTC code will call the drm_crtc_vblank_on()/off()
- *Really* mask the Vsync IRQ
- Initialize and enable vblank at the first
  atomic_begin()/_atomic_enable()

Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[fixed typos+added cc for stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122160103.10993-1-narmstrong@baylibre.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: set is_master to 0 upon drm_new_set_master() failure

commit 23a336b34258aba3b50ea6863cca4e81b5ef6384 upstream.

When drm_new_set_master() fails, set is_master to 0, to prevent a
possible NULL pointer deref.

Here is a problematic flow: we check is_master in drm_is_current_master(),
then proceed to call drm_lease_owner() passing master. If we do not restore
is_master status when drm_new_set_master() fails, we may have a situation
in which is_master will be 1 and master itself, NULL, leading to the deref
of a NULL pointer in drm_lease_owner().

This fixes the following OOPS, observed on an ArchLinux running a 4.19.2
kernel:

[   97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[   97.807224] PGD 0 P4D 0
[   97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI
[   97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P           OE     4.19.2-arch1-1-ARCH #1
[   97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018
[   97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[   97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[   97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202
[   97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88
[   97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000
[   97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000
[   97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888
[   97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8
[   97.807224] FS:  00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000
[   97.807224] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0
[   97.807224] Call Trace:
[   97.807224]  drm_is_current_master+0x1a/0x30 [drm]
[   97.807224]  drm_master_release+0x3e/0x130 [drm]
[   97.807224]  drm_file_free.part.0+0x2be/0x2d0 [drm]
[   97.807224]  drm_open+0x1ba/0x1e0 [drm]
[   97.807224]  drm_stub_open+0xaf/0xe0 [drm]
[   97.807224]  chrdev_open+0xa3/0x1b0
[   97.807224]  ? cdev_put.part.0+0x20/0x20
[   97.807224]  do_dentry_open+0x132/0x340
[   97.807224]  path_openat+0x2d1/0x14e0
[   97.807224]  ? mem_cgroup_commit_charge+0x7a/0x520
[   97.807224]  do_filp_open+0x93/0x100
[   97.807224]  ? __check_object_size+0x102/0x189
[   97.807224]  ? _raw_spin_unlock+0x16/0x30
[   97.807224]  do_sys_open+0x186/0x210
[   97.807224]  do_syscall_64+0x5b/0x170
[   97.807224]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   97.807224] RIP: 0033:0x7f4147b07976
[   97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44
[   97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[   97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976
[   97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c
[   98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000
[   98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024
[   98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012
[   98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid
[   98.040039]  dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler
[   98.040039] CR2: 0000000000000080
[   98.040039] ---[ end trace 3b65093b6fe62b2f ]---
[   98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[   98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[   98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202
[   98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88
[   98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000
[   98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000
[   98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888
[   98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8
[   98.040039] FS:  00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000
[   98.040039] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0

Signed-off-by: Sergio Correia <sergio@correia.cc>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122053329.2692-1-sergio@correia.cc
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/dm: Don't forget to attach MST encoders

commit c9e0ab86b2e03154bb898cd2f851827783224727 upstream.

The change fixed huge delay in SST daisy chain and S3 soft hang
observed in 4.19 kernel rebase.

Regression point in drm:
drm/fb-helper: Eliminate the .best_encoder() usage

The aux sequence is altered due to the failure in
drm_connector_for_each_possible_encoder(). The failure is
caused by missing attached encoder in the process of adding
MST connector.
 
drm_dp_send_enum_path_resources() aux transaction is pushed after
mode probe, which causes conflict to drm_dp_mst_i2c_xfer(),
leading to the transaction timeout.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Fix incorrect free on ioregs

commit dc25ab067645eabd037f1a23d49a666f9e0b8c68 upstream.

If the platform has no IO space, ioregs is placed next to the already
allocated regs. In this case, it should not be separately freed.

This prevents a kernel warning from __vunmap "Trying to vfree()
nonexistent vm area" when unloading the driver.

Fixes: 0dd68309b9c5 ("drm/ast: Try to use MMIO registers when PIO isn't supported")

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/fgraph: Fix set_graph_function from showing interrupts

commit 5cf99a0f3161bc3ae2391269d134d6bf7e26f00e upstream.

The tracefs file set_graph_function is used to only function graph functions
that are listed in that file (or all functions if the file is empty). The
way this is implemented is that the function graph tracer looks at every
function, and if the current depth is zero and the function matches
something in the file then it will trace that function. When other functions
are called, the depth will be greater than zero (because the original
function will be at depth zero), and all functions will be traced where the
depth is greater than zero.

The issue is that when a function is first entered, and the handler that
checks this logic is called, the depth is set to zero. If an interrupt comes
in and a function in the interrupt handler is traced, its depth will be
greater than zero and it will automatically be traced, even if the original
function was not. But because the logic only looks at depth it may trace
interrupts when it should not be.

The recent design change of the function graph tracer to fix other bugs
caused the depth to be zero while the function graph callback handler is
being called for a longer time, widening the race of this happening. This
bug was actually there for a longer time, but because the race window was so
small it seldom happened. The Fixes tag below is for the commit that widen
the race window, because that commit belongs to a series that will also help
fix the original bug.

Cc: stable@kernel.org
Fixes: 39eb456dacb5 ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Avoid load failure due to unknown link width

commit db7a691a1551a748cb92d9c89c6b190ea87e28d5 upstream.

If the firmware reports a connection width that is not 1x, 4x, 8x or 12x
it causes the driver to fail during initialization.

To prevent this failure every time a new width is introduced to the RDMA
stack, we will set a default 4x width for these widths which ar unknown to
the driver.

This is needed to allow to run old kernels with new firmware.

Cc: <stable@vger.kernel.org> # 4.1
Fixes: 1b5daf11b015 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode")
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: fix mips_get_syscall_arg o32 check

commit c50cbd85cd7027d32ac5945bb60217936b4f7eaf upstream.

When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should
use the task specified as its argument instead of the current task.

This potentially affects all syscall_get_arguments() users
who specify tasks different from the current.

Fixes: c0ff3c53d4f99 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21185/
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: ralink: Fix mt7620 nd_sd pinmux

commit 7d35baa4e9ec4b717bc0e58a39cdb6a1c50f5465 upstream.

In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are
configured as GPIOs. If they are blocked by the sd function, they can't
be used as GPIOs.

Reported-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Patchwork: https://patchwork.linux-mips.org/patch/21220/
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique

commit 0c7a52e4d4b5c4d35b31f3c3ad32af814f1bf491 upstream.

After enabling KVM event tracing, almost all of trace_kvm_exit()'s
printk shows

"kvm_exit: IRQ: ..."

even if the actual exception_type is NOT IRQ.  More specifically,
trace_kvm_exit() is defined in virt/kvm/arm/trace.h by TRACE_EVENT.

This slight problem may have existed after commit e6753f23d961
("tracepoint: Make rcuidle tracepoint callers use SRCU"). There are
two variables in trace_kvm_exit() and __DO_TRACE() which have the
same name, *idx*. Thus the actual value of *idx* will be overwritten
when tracing. Fix it by adding a simple prefix.

Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Wang Haibin <wanghaibin.wang@huawei.com>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched, trace: Fix prev_state output in sched_switch tracepoint

commit 3054426dc68e5d63aa6a6e9b91ac4ec78e3f3805 upstream.

commit 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout")
tried to fix the problem introduced by a previous commit efb40f588b43
("sched/tracing: Fix trace_sched_switch task-state printing"). However
the prev_state output in sched_switch is still broken.

task_state_index() uses fls() which considers the LSB as 1. Left
shifting 1 by this value gives an incorrect mapping to the task state.
Fix this by decrementing the value returned by __get_task_state()
before shifting.

Link: http://lkml.kernel.org/r/1540882473-1103-1-git-send-email-pkondeti@codeaurora.org
Cc: stable@vger.kernel.org
Fixes: 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout")
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ftrace: Fix to enable syscall events on arm64

commit 874bfc6e5422d2421f7e4d5ea318d30e91679dfe upstream.

Since commit 4378a7d4be30 ("arm64: implement syscall wrappers")
introduced "__arm64_" prefix to all syscall wrapper symbols in
sys_call_table, syscall tracer can not find corresponding
metadata from syscall name. In the result, we have no syscall
ftrace events on arm64 kernel, and some bpf testcases are failed
on arm64.

To fix this issue, this introduces custom
arch_syscall_match_sym_name() which skips first 8 bytes when
comparing the syscall and symbol names.

Fixes: 4378a7d4be30 ("arm64: implement syscall wrappers")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: Fix memory allocation in nanddev_bbt_init()

commit 40b412897ccb4b98b2cfb2a0aaabed58dd9e2086 upstream.

Fix the size of the buffer allocated to store the in-memory BBT.
This bug was previously hidden by a different bug, that was fixed in
commit d098093ba06e ("mtd: nand: Fix nanddev_neraseblocks()").

Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uprobes: Fix handle_swbp() vs. unregister() + register() race once more

commit 09d3f015d1e1b4fee7e9bbdcf54201d239393391 upstream.

Commit:

  142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")

added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb()
memory barriers, to ensure that handle_swbp() uses fully-initialized
uprobes only.

However, the smp_rmb() is mis-placed: this barrier should be placed
after handle_swbp() has tested for the flag, thus guaranteeing that
(program-order) subsequent loads from the uprobe can see the initial
stores performed by prepare_uprobe().

Move the smp_rmb() accordingly.  Also amend the comments associated
to the two memory barriers to indicate their actual locations.

Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org
Fixes: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iser: set sector for ambiguous mr status errors

commit 24c3456c8d5ee6fc1933ca40f7b4406130682668 upstream.

If for some reason we failed to query the mr status, we need to make sure
to provide sufficient information for an ambiguous error (guard error on
sector 0).

Fixes: 0a7a08ad6f5f ("IB/iser: Implement check_protection")
Cc: <stable@vger.kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

unifdef: use memcpy instead of strncpy

commit 38c7b224ce22c25fed04007839edf974bd13439d upstream.

New versions of gcc reasonably warn about the odd pattern of

strncpy(p, q, strlen(q));

which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.

There was a comment about _why_ the code used strncpy - to avoid the
terminating NUL byte, but memcpy does the same and avoids the warning.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

test_hexdump: use memcpy instead of strncpy

commit b1286ed7158e9b62787508066283ab0b8850b518 upstream.

New versions of gcc reasonably warn about the odd pattern of

strncpy(p, q, strlen(q));

which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.

Apparently there was a patch for this floating around earlier, but it
got lost.

Acked-again-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: fix corruption with direct issue

commit ffe81d45322cc3cb140f0db080a4727ea284661e upstream.

If we attempt a direct issue to a SCSI device, and it returns BUSY, then
we queue the request up normally. However, the SCSI layer may have
already setup SG tables etc for this particular command. If we later
merge with this request, then the old tables are no longer valid. Once
we issue the IO, we only read/write the original part of the request,
not the new state of it.

This causes data corruption, and is most often noticed with the file
system complaining about the just read data being invalid:

[  235.934465] EXT4-fs error (device sda1): ext4_iget:4831: inode #7142: comm dpkg-query: bad extra_isize 24937 (inode size 256)

because most of it is garbage...

This doesn't happen from the normal issue path, as we will simply defer
the request to the hardware queue dispatch list if we fail. Once it's on
the dispatch list, we never merge with it.

Fix this from the direct issue path by flagging the request as
REQ_NOMERGE so we don't change the size of it before issue.

See also:
  https://bugzilla.kernel.org/show_bug.cgi?id=201685

Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 6ce3dd6eec1 ("blk-mq: issue directly if hw queue isn't busy in case of 'none'")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.7

misc: mic/scif: fix copy-paste error in scif_create_remote_lookup

commit 6484a677294aa5d08c0210f2f387ebb9be646115 upstream.

gcc '-Wunused-but-set-variable' warning:

drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup':
drivers/misc/mic/scif/scif_rma.c:373:25: warning:
 variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable]

'vmalloc_num_pages' should be used to determine if the address is
within the vmalloc range.

Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: check the creation_status in vmbus_establish_gpadl()

commit eceb05965489784f24bbf4d61ba60e475a983016 upstream.

This is a longstanding issue: if the vmbus upper-layer drivers try to
consume too many GPADLs, the host may return with an error
0xC0000044 (STATUS_QUOTA_EXCEEDED), but currently we forget to check
the creation_status, and hence we can pass an invalid GPADL handle
into the OPEN_CHANNEL message, and get an error code 0xc0000225 in
open_info->response.open_result.status, and finally we hang in
vmbus_open() -> "goto error_free_info" -> vmbus_teardown_gpadl().

With this patch, we can exit gracefully on STATUS_QUOTA_EXCEEDED.

Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: use swp_offset as key in shmem_replace_page()

commit c1cb20d43728aa9b5393bd8d489bc85c142949b2 upstream.

We changed the key of swap cache tree from swp_entry_t.val to
swp_offset.  We need to do so in shmem_replace_page() as well.

Hugh said:
 "shmem_replace_page() has been wrong since the day I wrote it: good
  enough to work on swap "type" 0, which is all most people ever use
  (especially those few who need shmem_replace_page() at all), but
  broken once there are any non-0 swp_type bits set in the higher order
  bits"

Link: http://lkml.kernel.org/r/20181121215442.138545-1-yuzhao@google.com
Fixes: f6ab1f7f6b2d ("mm, swap: use offset of swap entry as key of swap cache")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: cleancache: fix corruption on missed inode invalidation

commit 6ff38bd40230af35e446239396e5fc8ebd6a5248 upstream.

If all pages are deleted from the mapping by memory reclaim and also
moved to the cleancache:

__delete_from_page_cache
  (no shadow case)
  unaccount_page_cache_page
    cleancache_put_page
  page_cache_delete
    mapping->nrpages -= nr
    (nrpages becomes 0)

We don't clean the cleancache for an inode after final file truncation
(removal).

truncate_inode_pages_final
  check (nrpages || nrexceptional) is false
    no truncate_inode_pages
      no cleancache_invalidate_inode(mapping)

These way when reading the new file created with same inode we may get
these trash leftover pages from cleancache and see wrong data instead of
the contents of the new file.

Fix it by always doing truncate_inode_pages which is already ready for
nrpages == 0 && nrexceptional == 0 case and just invalidates inode.

[akpm@linux-foundation.org: add comment, per Jan]
Link: http://lkml.kernel.org/r/20181112095734.17979-1-ptikhomirov@virtuozzo.com
Fixes: commit 91b0abe36a7b ("mm + fs: store shadow entries in page cache")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/test_kmod.c: fix rmmod double free

commit 5618cf031fecda63847cafd1091e7b8bd626cdb1 upstream.

We free the misc device string twice on rmmod; fix this.  Without this
we cannot remove the module without crashing.

Link: http://lkml.kernel.org/r/20181124050500.5257-1-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org> [4.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:st_magn: Fix enable device after trigger

commit fe5192ac81ad0d4dfe1395d11f393f0513c15f7f upstream.

Currently, we enable the device before we enable the device trigger. At
high frequencies, this can cause interrupts that don't yet have a poll
function associated with them and are thus treated as spurious. At high
frequencies with level interrupts, this can even cause an interrupt storm
of repeated spurious interrupts (~100,000 on my Beagleboard with the
LSM9DS1 magnetometer). If these repeat too much, the interrupt will get
disabled and the device will stop functioning.

To prevent these problems, enable the device prior to enabling the device
trigger, and disable the divec prior to disabling the trigger. This means
there's no window of time during which the device creates interrupts but we
have no trigger to answer them.

Fixes: 90efe055629 ("iio: st_sensors: harden interrupt handling")
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Tested-by: Denis Ciocca <denis.ciocca@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers

commit 0145b50566e7de5637e80ecba96c7f0e6fff1aad upstream.

Before this commit sensor_hub_input_attr_get_raw_value() failed to take
the signedness of 16 and 8 bit values into account, returning e.g.
65436 instead of -100 for the z-axis reading of an accelerometer.

This commit adds a new is_signed parameter to the function and makes all
callers pass the appropriate value for this.

While at it, this commit also fixes up some neighboring lines where
statements were needlessly split over 2 lines to improve readability.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"

commit 38317f5c0f2faae5110854f36edad810f841d62f upstream.

This reverts commit ffb80fc672c3a7b6afd0cefcb1524fb99917b2f3.

Turns out that commit is wrong. Host controllers are allowed to use
Clear Feature HALT as means to sync data toggle between host and
periperal.

Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>