Jinke Han [Sat, 3 Sep 2022 01:24:29 +0000 (09:24 +0800)]
ext4: place buffer head allocation before handle start
commit
d1052d236eddf6aa851434db1897b942e8db9921 upstream.
In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.
One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.
Cc: stable@kernel.org
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220903012429.22555-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Yi [Wed, 31 Aug 2022 07:46:29 +0000 (15:46 +0800)]
ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate
commit
0b73284c564d3ae4feef4bc920292f004acf4980 upstream.
Recently we notice that ext4 filesystem would occasionally fail to read
metadata from disk and report error message, but the disk and block
layer looks fine. After analyse, we lockon commit
88dbcbb3a484
("blkdev: avoid migration stalls for blkdev pages"). It provide a
migration method for the bdev, we could move page that has buffers
without extra users now, but it lock the buffers on the page, which
breaks the fragile metadata read operation on ext4 filesystem,
ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the
assumption of that locked buffer means it is under IO. So it just
trylock the buffer and skip submit IO if it lock failed, after
wait_on_buffer() we conclude IO error because the buffer is not
uptodate.
This issue could be easily reproduced by add some delay just after
buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do
fsstress on ext4 filesystem.
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193:
comm fsstress: reading directory lblock 0
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334:
comm fsstress: reading directory lblock 0
Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock
the buffer and submit IO if it's not uptodate, and also leave over
readahead helper.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Czerner [Wed, 24 Aug 2022 16:03:47 +0000 (18:03 +0200)]
ext4: don't increase iversion counter for ea_inodes
commit
50f094a5580e6297bf10a807d16f0ee23fa576cf upstream.
ea_inodes are using i_version for storing part of the reference count so
we really need to leave it alone.
The problem can be reproduced by xfstest ext4/026 when iversion is
enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL
inodes in ext4_mark_iloc_dirty().
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220824160349.39664-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Mon, 22 Aug 2022 11:48:32 +0000 (13:48 +0200)]
ext4: fix check for block being out of directory size
commit
61a1d87a324ad5e3ed27c6699dfc93218fcf3201 upstream.
The check in __ext4_read_dirblock() for block being outside of directory
size was wrong because it compared block number against directory size
in bytes. Fix it.
Fixes:
65f8ea4cd57d ("ext4: check if directory block is within i_size")
CVE: CVE-2022-1184
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220822114832.1482-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lalith Rajendran [Thu, 18 Aug 2022 21:40:49 +0000 (21:40 +0000)]
ext4: make ext4_lazyinit_thread freezable
commit
3b575495ab8dbb4dbe85b4ac7f991693c3668ff5 upstream.
ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.
Cc: stable@kernel.org
Signed-off-by: Lalith Rajendran <lalithkraj@google.com>
Link: https://lore.kernel.org/r/20220818214049.1519544-1-lalithkraj@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Fri, 5 Aug 2022 12:39:47 +0000 (20:39 +0800)]
ext4: fix null-ptr-deref in ext4_write_info
commit
f9c1f248607d5546075d3f731e7607d5571f2b60 upstream.
I caught a null-ptr-deref bug as follows:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339
RIP: 0010:ext4_write_info+0x53/0x1b0
[...]
Call Trace:
dquot_writeback_dquots+0x341/0x9a0
ext4_sync_fs+0x19e/0x800
__sync_filesystem+0x83/0x100
sync_filesystem+0x89/0xf0
generic_shutdown_super+0x79/0x3e0
kill_block_super+0xa1/0x110
deactivate_locked_super+0xac/0x130
deactivate_super+0xb6/0xd0
cleanup_mnt+0x289/0x400
__cleanup_mnt+0x16/0x20
task_work_run+0x11c/0x1c0
exit_to_user_mode_prepare+0x203/0x210
syscall_exit_to_user_mode+0x5b/0x3a0
do_syscall_64+0x59/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
==================================================================
Above issue may happen as follows:
-------------------------------------
exit_to_user_mode_prepare
task_work_run
__cleanup_mnt
cleanup_mnt
deactivate_super
deactivate_locked_super
kill_block_super
generic_shutdown_super
shrink_dcache_for_umount
dentry = sb->s_root
sb->s_root = NULL <--- Here set NULL
sync_filesystem
__sync_filesystem
sb->s_op->sync_fs > ext4_sync_fs
dquot_writeback_dquots
sb->dq_op->write_info > ext4_write_info
ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2)
d_inode(sb->s_root)
s_root->d_inode <--- Null pointer dereference
To solve this problem, we use ext4_journal_start_sb directly
to avoid s_root being used.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220805123947.565152-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Wed, 27 Jul 2022 15:57:53 +0000 (17:57 +0200)]
ext4: avoid crash when inline data creation follows DIO write
commit
4bb26f2885ac6930984ee451b952c5a6042f2c0e upstream.
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
kernel BUG at fs/ext4/inode.c:2721!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:ext4_writepages+0x363d/0x3660
RSP: 0018:
ffffc90000ccf260 EFLAGS:
00010293
RAX:
ffffffff81e1abcd RBX:
0000008000000000 RCX:
ffff88810842a180
RDX:
0000000000000000 RSI:
0000008000000000 RDI:
0000000000000000
RBP:
ffffc90000ccf650 R08:
ffffffff81e17d58 R09:
ffffed10222c680b
R10:
dfffe910222c680c R11:
1ffff110222c680a R12:
ffff888111634128
R13:
ffffc90000ccf880 R14:
0000008410000000 R15:
0000000000000001
FS:
00007f72635d2640(0000) GS:
ffff88811b000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000565243379180 CR3:
000000010aa74000 CR4:
0000000000150eb0
Call Trace:
<TASK>
do_writepages+0x397/0x640
filemap_fdatawrite_wbc+0x151/0x1b0
file_write_and_wait_range+0x1c9/0x2b0
ext4_sync_file+0x19e/0xa00
vfs_fsync_range+0x17b/0x190
ext4_buffered_write_iter+0x488/0x530
ext4_file_write_iter+0x449/0x1b90
vfs_write+0xbcd/0xf40
ksys_write+0x198/0x2c0
__x64_sys_write+0x7b/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing
direct IO write to a file.
Cc: stable@kernel.org
Reported-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reported-by: syzbot+bd13648a53ed6933ca49@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=a1e89d09bbbcbd5c4cb45db230ee28c822953984
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Tadeusz Struk<tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220727155753.13969-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Sat, 17 Sep 2022 09:38:05 +0000 (17:38 +0800)]
jbd2: add miss release buffer head in fc_do_one_pass()
commit
dfff66f30f66b9524b661f311bbed8ff3d2ca49f upstream.
In fc_do_one_pass() miss release buffer head after use which will lead
to reference count leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220917093805.1782845-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Wed, 14 Sep 2022 10:08:12 +0000 (18:08 +0800)]
jbd2: fix potential use-after-free in jbd2_fc_wait_bufs
commit
243d1a5d505d0b0460c9af0ad56ed4a56ef0bebd upstream.
In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count
which may lead to use-after-free.
So judge buffer if uptodate before put buffer head reference count.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Wed, 14 Sep 2022 10:08:11 +0000 (18:08 +0800)]
jbd2: fix potential buffer head reference count leak
commit
e0d5fc7a6d80ac2406c7dfc6bb625201d0250a8a upstream.
As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without
update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head
from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to
buffer head buffer head reference count leak.
To solve above issue, update 'journal->j_fc_off' before return -EIO.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Perepechko [Wed, 7 Sep 2022 16:59:59 +0000 (19:59 +0300)]
jbd2: wake up journal waiters in FIFO order, not LIFO
commit
34fc8768ec6089565d6d73bad26724083cecf7bd upstream.
LIFO wakeup order is unfair and sometimes leads to a journal
user not being able to get a journal handle for hundreds of
transactions in a row.
FIFO wakeup can make things more fair.
Cc: stable@kernel.org
Signed-off-by: Alexey Lyashkov <alexey.lyashkov@gmail.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220907165959.1137482-1-alexey.lyashkov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Fri, 30 Sep 2022 05:57:43 +0000 (22:57 -0700)]
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
commit
607e57c6c62c00965ae276902c166834ce73014a upstream.
Now that Clang's -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
option is no longer required, remove it from the command line. Clang 16
and later will warn when it is used, which will cause Kconfig to think
it can't use -ftrivial-auto-var-init=zero at all. Check for whether it
is required and only use it when so.
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-kbuild@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes:
f02003c860d9 ("hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Tue, 14 Sep 2021 19:49:03 +0000 (12:49 -0700)]
hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO
commit
f02003c860d921171be4a27e2893766eb3bc6871 upstream.
Currently under Clang, CC_HAS_AUTO_VAR_INIT_ZERO requires an extra
-enable flag compared to CC_HAS_AUTO_VAR_INIT_PATTERN. GCC 12[1] will
not, and will happily ignore the Clang-specific flag. However, its
presence on the command-line is both cumbersome and confusing. Due to
GCC's tolerant behavior, though, we can continue to use a single Kconfig
cc-option test for the feature on both compilers, but then drop the
Clang-specific option in the Makefile.
In other words, this patch does not change anything other than making the
compiler command line shorter once GCC supports -ftrivial-auto-var-init=zero.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=
a25e0b5e6ac8a77a71c229e0a7b744603365b0e9
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: llvm@lists.linux.dev
Fixes:
dcb7c0b9461c ("hardening: Clarify Kconfig text for auto-var-init")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/20210914102837.6172-1-will@kernel.org/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Wed, 14 Sep 2022 11:51:51 +0000 (19:51 +0800)]
f2fs: fix to do sanity check on summary info
commit
c6ad7fd16657ebd34a87a97d9588195aae87597d upstream.
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216456
BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs]
Read of size 4 at addr
ffff8881464dcd80 by task mount/1013
CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x5e
print_report.cold+0xf3/0x68d
kasan_report+0xa8/0x130
recover_data+0x63ae/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node
is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size
page.
- recover_data
- do_recover_data
- check_index_in_prev_nodes
- f2fs_data_blkaddr
This patch adds sanity check on summary info in recovery and GC flow
in where the flows rely on them.
After patch:
[ 29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Tue, 13 Sep 2022 02:08:41 +0000 (10:08 +0800)]
f2fs: fix to do sanity check on destination blkaddr during recovery
commit
0ef4ca04a3f9223ff8bc440041c524b2123e09a3 upstream.
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216456
loop5: detected capacity change from 0 to 131072
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1
F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0
F2FS-fs (loop5): Bitmap was wrongly set, blk:5634
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198
RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs]
Call Trace:
<TASK>
f2fs_do_replace_block+0xa98/0x1890 [f2fs]
f2fs_replace_block+0xeb/0x180 [f2fs]
recover_data+0x1a69/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic
instead of warning.
The root cause is: in fuzzed image, SIT table is inconsistent with inode
mapping table, result in triggering such warning during SIT table update.
This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this
flag, data block recovery flow can check destination blkaddr's validation
in SIT table, and skip f2fs_replace_block() to avoid inconsistent status.
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Tue, 23 Aug 2022 17:18:42 +0000 (10:18 -0700)]
f2fs: increase the limit for reserve_root
commit
da35fe96d12d15779f3cb74929b7ed03941cf983 upstream.
This patch increases the threshold that limits the reserved root space from 0.2%
to 12.5% by using simple shift operation.
Typically Android sets 128MB, but if the storage capacity is 32GB, 0.2% which is
around 64MB becomes too small. Let's relax it.
Cc: stable@vger.kernel.org
Reported-by: Aran Dalton <arda@allwinnertech.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Fri, 19 Aug 2022 22:52:02 +0000 (15:52 -0700)]
f2fs: flush pending checkpoints when freezing super
commit
c7b58576370147833999fd4cc874d0f918bdf9ca upstream.
This avoids -EINVAL when trying to freeze f2fs.
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Fri, 19 Aug 2022 05:40:09 +0000 (22:40 -0700)]
f2fs: complete checkpoints during remount
commit
4f99484d27961cb194cebcd917176fa038a5025f upstream.
Otherwise, pending checkpoints can contribute a race condition to give a
quota warning.
- Thread - checkpoint thread
add checkpoints to the list
do_remount()
down_write(&sb->s_umount);
f2fs_remount()
block_operations()
down_read_trylock(&sb->s_umount) = 0
up_write(&sb->s_umount);
f2fs_quota_sync()
dquot_writeback_dquots()
WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));
Or,
do_remount()
down_write(&sb->s_umount);
f2fs_remount()
create a ckpt thread
f2fs_enable_checkpoint() adds checkpoints
wait for f2fs_sync_fs()
trigger another pending checkpoint
block_operations()
down_read_trylock(&sb->s_umount) = 0
up_write(&sb->s_umount);
f2fs_quota_sync()
dquot_writeback_dquots()
WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Tue, 20 Sep 2022 13:43:51 +0000 (22:43 +0900)]
btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer
commit
cbddcc4fa3443fe8cfb2ff8e210deb1f6a0eea38 upstream.
syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for
commit
bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code")
missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must
not be moved to after clean_tree_block() because clean_tree_block() is
calling btrfs_header_generation() since commit
55c69072d6bd5be1 ("Btrfs:
Fix extent_buffer usage when nodesize != leafsize").
Since memzero_extent_buffer() will reset "struct btrfs_header" part, we
can't move btrfs_set_header_generation() to before memzero_extent_buffer().
Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block().
Link: https://syzkaller.appspot.com/bug?extid=fba8e2116a12609b6c59
Reported-by: syzbot <syzbot+fba8e2116a12609b6c59@syzkaller.appspotmail.com>
Fixes:
bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Tue, 23 Aug 2022 11:45:42 +0000 (12:45 +0100)]
btrfs: fix race between quota enable and quota rescan ioctl
commit
331cd9461412e103d07595a10289de90004ac890 upstream.
When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.
We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.
So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error.
Reported-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Czerner [Thu, 25 Aug 2022 10:06:57 +0000 (12:06 +0200)]
fs: record I_DIRTY_TIME even if inode already has I_DIRTY_INODE
commit
cbfecb927f429a6fa613d74b998496bd71e4438a upstream.
Currently the I_DIRTY_TIME will never get set if the inode already has
I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME. That's
true, however ext4 will only update the on-disk inode in
->dirty_inode(), not on actual writeback. As a result if the inode
already has I_DIRTY_INODE state by the time we get to
__mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled
into on-disk inode and will not get updated until the next I_DIRTY_INODE
update, which might never come if we crash or get a power failure.
The problem can be reproduced on ext4 by running xfstest generic/622
with -o iversion mount option.
Fix it by allowing I_DIRTY_TIME to be set even if the inode already has
I_DIRTY_INODE. Also make sure that the case is properly handled in
writeback_single_inode() as well. Additionally changes in
xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag.
Thanks Jan Kara for suggestions on how to make this work properly.
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220825100657.44217-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mickaël Salaün [Thu, 29 Sep 2022 10:04:47 +0000 (12:04 +0200)]
ksmbd: Fix user namespace mapping
commit
7c88c1e0ab1704bacb751341ee6431c3be34b834 upstream.
A kernel daemon should not rely on the current thread, which is unknown
and might be malicious. Before this security fix,
ksmbd_override_fsids() didn't correctly override FS UID/GID which means
that arbitrary user space threads could trick the kernel to impersonate
arbitrary users or groups for file system access checks, leading to
file system access bypass.
This was found while investigating truncate support for Landlock:
https://lore.kernel.org/r/CAKYAXd8fpMJ7guizOjHgxEyyjoUwPsx3jLOPZP=wPYcbhkVXqA@mail.gmail.com
Fixes:
e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Steve French <smfrench@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220929100447.108468-1-mic@digikod.net
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Xiaoxu [Mon, 26 Sep 2022 03:36:30 +0000 (11:36 +0800)]
ksmbd: Fix wrong return value and message length check in smb2_ioctl()
commit
b1763d265af62800ec96eeb79803c4c537dcef3a upstream.
Commit
c7803b05f74b ("smb3: fix ksmbd bigendian bug in oplock
break, and move its struct to smbfs_common") use the defination
of 'struct validate_negotiate_info_req' in smbfs_common, the
array length of 'Dialects' changed from 1 to 4, but the protocol
does not require the client to send all 4. This lead the request
which satisfied with protocol and server to fail.
So just ensure the request payload has the 'DialectCount' in
smb2_ioctl(), then fsctl_validate_negotiate_info() will use it
to validate the payload length and each dialect.
Also when the {in, out}_buf_len is less than the required, should
goto out to initialize the status in the response header.
Fixes:
f7db8fd03a4b ("ksmbd: add validation in smb2_ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Thu, 22 Sep 2022 14:35:43 +0000 (23:35 +0900)]
ksmbd: fix endless loop when encryption for response fails
commit
360c8ee6fefdb496fffd2c18bb9a96a376a1a804 upstream.
If ->encrypt_resp return error, goto statement cause endless loop.
It send an error response immediately after removing it.
Fixes:
0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hyunwoo Kim [Sun, 25 Sep 2022 13:32:43 +0000 (06:32 -0700)]
fbdev: smscufx: Fix use-after-free in ufx_ops_open()
commit
5610bcfe8693c02e2e4c8b31427f1bdbdecc839c upstream.
A race condition may occur if the user physically removes the
USB device while calling open() for this device node.
This is a race condition between the ufx_ops_open() function and
the ufx_usb_disconnect() function, which may eventually result in UAF.
So, add a mutex to the ufx_ops_open() and ufx_usb_disconnect() functions
to avoid race contidion of krefs.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Schulz [Fri, 30 Sep 2022 13:20:32 +0000 (15:20 +0200)]
pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
commit
4635c0e2a7f7f3568cbfccae70121f9835efa62c upstream.
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's re-implement the pinmux_ops.gpio_set_direction callback so that
the gpio subsystem can request from the pinctrl driver to put the pin in
its GPIO function.
Fixes:
9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-2-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Schulz [Fri, 30 Sep 2022 13:20:33 +0000 (15:20 +0200)]
gpio: rockchip: request GPIO mux to pinctrl when setting direction
commit
8ea8af6c8469156ac2042d83d73f6b74eb4b4b45 upstream.
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's call pinctrl_gpio_direction_input/output when setting the
direction of a GPIO so that the pinctrl core requests from the rockchip
pinctrl driver to put the pin in its GPIO function.
Fixes:
9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Fixes:
936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-3-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saurav Kashyap [Mon, 19 Sep 2022 13:44:34 +0000 (06:44 -0700)]
scsi: qedf: Populate sysfs attributes for vport
commit
592642e6b11e620e4b43189f8072752429fc8dc3 upstream.
Few vport parameters were displayed by systool as 'Unknown' or 'NULL'.
Copy speed, supported_speed, frame_size and update port_type for NPIV port.
Link: https://lore.kernel.org/r/20220919134434.3513-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Fri, 16 Sep 2022 12:29:08 +0000 (13:29 +0100)]
slimbus: qcom-ngd: cleanup in probe error path
commit
16f14551d0df9e7cd283545d7d748829594d912f upstream.
Add proper error path in probe() to cleanup resources previously
acquired/allocated to fix warnings visible during probe deferral:
notifier callback qcom_slim_ngd_ssr_notify already registered
WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90
Modules linked in:
CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-
20220830 #380
Call trace:
notifier_chain_register+0x5c/0x90
srcu_notifier_chain_register+0x44/0x90
qcom_register_ssr_notifier+0x38/0x4c
qcom_slim_ngd_ctrl_probe+0xd8/0x400
platform_probe+0x6c/0xe0
really_probe+0xbc/0x2d4
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x12c
__device_attach_driver+0xb8/0x120
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x88/0xc0
process_one_work+0x1d4/0x320
worker_thread+0x2cc/0x44c
kthread+0x110/0x114
ret_from_fork+0x10/0x20
Fixes:
e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Fri, 16 Sep 2022 12:29:07 +0000 (13:29 +0100)]
slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failure
commit
5038d21dde818fe74ba1fcb6f2cee35b8c2ebbf2 upstream.
Use correct error code, instead of previous 'ret' value, when printing
error from pdr_add_lookup() failure.
Fixes:
e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Sat, 27 Aug 2022 13:44:54 +0000 (15:44 +0200)]
powerpc/boot: Explicitly disable usage of SPE instructions
commit
110a58b9f91c66f743c01a2c217243d94c899c23 upstream.
uImage boot wrapper should not use SPE instructions, like kernel itself.
Boot wrapper has already disabled Altivec and VSX instructions but not SPE.
Options -mno-spe and -mspe=no already set when compilation of kernel, but
not when compiling uImage wrapper yet. Fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220827134454.17365-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Rui [Sat, 24 Sep 2022 05:47:36 +0000 (13:47 +0800)]
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
commit
4c081324df5608b73428662ca54d5221ea03a6bd upstream.
Intel Xeon servers used to use a fixed energy resolution (15.3uj) for
Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard
energy resolution as described in MSR_RAPL_POWER_UNIT.
Remove the SPR dram_domain_energy_unit quirk.
Fixes:
2d798d9f5967 ("powercap: intel_rapl: add support for Sapphire Rapids")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Thu, 1 Sep 2022 19:10:24 +0000 (15:10 -0400)]
NFSD: Protect against send buffer overflow in NFSv3 READ
commit
fa6be9cc6e80ec79892ddf08a8c10cabab9baf38 upstream.
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Thu, 1 Sep 2022 19:10:18 +0000 (15:10 -0400)]
NFSD: Protect against send buffer overflow in NFSv2 READ
commit
401bc1f90874280a80b93f23be33a0e7e2d1f912 upstream.
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Thu, 1 Sep 2022 19:10:12 +0000 (15:10 -0400)]
NFSD: Protect against send buffer overflow in NFSv3 READDIR
commit
640f87c190e0d1b2a0fcb2ecf6d2cd53b1c41991 upstream.
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply message at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.
A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.
Thanks to Aleksi Illikainen and Kari Hulkko for uncovering this
issue.
Reported-by: Ben Ronallo <Benjamin.Ronallo@synopsys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Tue, 20 Sep 2022 23:35:37 +0000 (00:35 +0100)]
serial: 8250: Request full 16550A feature probing for OxSemi PCIe devices
commit
00b7a4d4ee42be1c515e56cb1e8ba0f25e271d8e upstream.
Oxford Semiconductor PCIe (Tornado) 950 serial port devices need to
operate in the enhanced mode via the EFR register for the Divide-by-M
N/8 baud rate generator prescaler to be used in their native UART mode.
Otherwise the prescaler is fixed at 1 causing grossly incorrect baud
rates to be programmed.
Accessing the EFR register requires 16550A features to have been probed
for, so request this to happen regardless of SERIAL_8250_16550A_VARIANTS
by setting UPF_FULL_PROBE in port flags.
Fixes:
366f6c955d4d ("serial: 8250: Add proper clock handling for OxSemi PCIe devices")
Cc: stable@vger.kernel.org # v5.19+
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209210005040.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Tue, 20 Sep 2022 23:35:32 +0000 (00:35 +0100)]
serial: 8250: Let drivers request full 16550A feature probing
commit
9906890c89e4dbd900ed87ad3040080339a7f411 upstream.
A SERIAL_8250_16550A_VARIANTS configuration option has been recently
defined that lets one request the 8250 driver not to probe for 16550A
device features so as to reduce the driver's device startup time in
virtual machines.
Some actual hardware devices require these features to have been fully
determined however for their driver to work correctly, so define a flag
to let drivers request full 16550A feature probing on a device-by-device
basis if required regardless of the SERIAL_8250_16550A_VARIANTS option
setting chosen.
Fixes:
dc56ecb81a0a ("serial: 8250: Support disabling mdelay-filled probes of 16550A variants")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209202357520.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Wed, 21 Sep 2022 19:49:16 +0000 (20:49 +0100)]
PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge
commit
0e32818397426a688f598f35d3bc762eca6d7592 upstream.
When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.
This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:
pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:06:08.0: USB UHCI 1.1
pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.1: USB UHCI 1.1
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable). Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: no space for bridge window [io size 0x2000]
pci 0000:02:02.0: no space for bridge window [io size 0x1000]
pci 0000:05:00.0: no space for bridge window [io size 0x1000]
pci 0000:06:08.0: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff]
A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released
pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone
pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f]
...
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host controller halted, very bad!
uhci_hcd 0000:06:08.0: HCRESET not completed yet!
uhci_hcd 0000:06:08.0: HC died; cleaning up
If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.
[bhelgaas: commit log, use pci_upstream_bridge()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk
Fixes:
58c84eda0756 ("PCI: fall back to original BIOS BAR addresses")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.35+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 2 Oct 2022 22:20:06 +0000 (18:20 -0400)]
xen/gntdev: Accommodate VMA splitting
commit
5c13a4a0291b30191eff9ead8d010e1ca43a4d0c upstream.
Prior to this commit, the gntdev driver code did not handle the
following scenario correctly with paravirtualized (PV) Xen domains:
* User process sets up a gntdev mapping composed of two grant mappings
(i.e., two pages shared by another Xen domain).
* User process munmap()s one of the pages.
* User process munmap()s the remaining page.
* User process exits.
In the scenario above, the user process would cause the kernel to log
the following messages in dmesg for the first munmap(), and the second
munmap() call would result in similar log messages:
BUG: Bad page map in process doublemap.test pte:... pmd:...
page:
0000000057c97bff refcount:1 mapcount:-1 \
mapping:
0000000000000000 index:0x0 pfn:...
...
page dumped because: bad pte
...
file:gntdev fault:0x0 mmap:gntdev_mmap [xen_gntdev] readpage:0x0
...
Call Trace:
<TASK>
dump_stack_lvl+0x46/0x5e
print_bad_pte.cold+0x66/0xb6
unmap_page_range+0x7e5/0xdc0
unmap_vmas+0x78/0xf0
unmap_region+0xa8/0x110
__do_munmap+0x1ea/0x4e0
__vm_munmap+0x75/0x120
__x64_sys_munmap+0x28/0x40
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
...
For each munmap() call, the Xen hypervisor (if built with CONFIG_DEBUG)
would print out the following and trigger a general protection fault in
the affected Xen PV domain:
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
(XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
As of this writing, gntdev_grant_map structure's vma field (referred to
as map->vma below) is mainly used for checking the start and end
addresses of mappings. However, with split VMAs, these may change, and
there could be more than one VMA associated with a gntdev mapping.
Hence, remove the use of map->vma and rely on map->pages_vm_start for
the original start address and on (map->count << PAGE_SHIFT) for the
original mapping size. Let the invalidate() and find_special_page()
hooks use these.
Also, given that there can be multiple VMAs associated with a gntdev
mapping, move the "mmu_interval_notifier_remove(&map->notifier)" call to
the end of gntdev_put_map, so that the MMU notifier is only removed
after the closing of the last remaining VMA.
Finally, use an atomic to prevent inadvertent gntdev mapping re-use,
instead of using the map->live_grants atomic counter and/or the map->vma
pointer (the latter of which is now removed). This prevents the
userspace from mmap()'ing (with MAP_FIXED) a gntdev mapping over the
same address range as a previously set up gntdev mapping. This scenario
can be summarized with the following call-trace, which was valid prior
to this commit:
mmap
gntdev_mmap
mmap (repeat mmap with MAP_FIXED over the same address range)
gntdev_invalidate
unmap_grant_pages (sets 'being_removed' entries to true)
gnttab_unmap_refs_async
unmap_single_vma
gntdev_mmap (maps the shared pages again)
munmap
gntdev_invalidate
unmap_grant_pages
(no-op because 'being_removed' entries are true)
unmap_single_vma (For PV domains, Xen reports that a granted page
is being unmapped and triggers a general protection fault in the
affected domain, if Xen was built with CONFIG_DEBUG)
The fix for this last scenario could be worth its own commit, but we
opted for a single commit, because removing the gntdev_grant_map
structure's vma field requires guarding the entry to gntdev_mmap(), and
the live_grants atomic counter is not sufficient on its own to prevent
the mmap() over a pre-existing mapping.
Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes:
ab31523c2fca ("xen/gntdev: allow usermode to map granted pages")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-3-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M. Vefa Bicakci [Sun, 2 Oct 2022 22:20:05 +0000 (18:20 -0400)]
xen/gntdev: Prevent leaking grants
commit
0991028cd49567d7016d1b224fe0117c35059f86 upstream.
Prior to this commit, if a grant mapping operation failed partially,
some of the entries in the map_ops array would be invalid, whereas all
of the entries in the kmap_ops array would be valid. This in turn would
cause the following logic in gntdev_map_grant_pages to become invalid:
for (i = 0; i < map->count; i++) {
if (map->map_ops[i].status == GNTST_okay) {
map->unmap_ops[i].handle = map->map_ops[i].handle;
if (!use_ptemod)
alloced++;
}
if (use_ptemod) {
if (map->kmap_ops[i].status == GNTST_okay) {
if (map->map_ops[i].status == GNTST_okay)
alloced++;
map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
}
}
}
...
atomic_add(alloced, &map->live_grants);
Assume that use_ptemod is true (i.e., the domain mapping the granted
pages is a paravirtualized domain). In the code excerpt above, note that
the "alloced" variable is only incremented when both kmap_ops[i].status
and map_ops[i].status are set to GNTST_okay (i.e., both mapping
operations are successful). However, as also noted above, there are
cases where a grant mapping operation fails partially, breaking the
assumption of the code excerpt above.
The aforementioned causes map->live_grants to be incorrectly set. In
some cases, all of the map_ops mappings fail, but all of the kmap_ops
mappings succeed, meaning that live_grants may remain zero. This in turn
makes it impossible to unmap the successfully grant-mapped pages pointed
to by kmap_ops, because unmap_grant_pages has the following snippet of
code at its beginning:
if (atomic_read(&map->live_grants) == 0)
return; /* Nothing to do */
In other cases where only some of the map_ops mappings fail but all
kmap_ops mappings succeed, live_grants is made positive, but when the
user requests unmapping the grant-mapped pages, __unmap_grant_pages_done
will then make map->live_grants negative, because the latter function
does not check if all of the pages that were requested to be unmapped
were actually unmapped, and the same function unconditionally subtracts
"data->count" (i.e., a value that can be greater than map->live_grants)
from map->live_grants. The side effects of a negative live_grants value
have not been studied.
The net effect of all of this is that grant references are leaked in one
of the above conditions. In Qubes OS v4.1 (which uses Xen's grant
mechanism extensively for X11 GUI isolation), this issue manifests
itself with warning messages like the following to be printed out by the
Linux kernel in the VM that had granted pages (that contain X11 GUI
window data) to dom0: "g.e. 0x1234 still pending", especially after the
user rapidly resizes GUI VM windows (causing some grant-mapping
operations to partially or completely fail, due to the fact that the VM
unshares some of the pages as part of the window resizing, making the
pages impossible to grant-map from dom0).
The fix for this issue involves counting all successful map_ops and
kmap_ops mappings separately, and then adding the sum to live_grants.
During unmapping, only the number of successfully unmapped grants is
subtracted from live_grants. The code is also modified to check for
negative live_grants values after the subtraction and warn the user.
Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes:
dbe97cff7dd9 ("xen/gntdev: Avoid blocking in unmap_grant_pages()")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Acked-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-2-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Carlos Llamas [Fri, 30 Sep 2022 00:38:43 +0000 (00:38 +0000)]
mm/mmap: undo ->mmap() when arch_validate_flags() fails
commit
deb0f6562884b5b4beb883d73e66a7d3a1b96d99 upstream.
Commit
c462ac288f2c ("mm: Introduce arch_validate_flags()") added a late
check in mmap_region() to let architectures validate vm_flags. The check
needs to happen after calling ->mmap() as the flags can potentially be
modified during this callback.
If arch_validate_flags() check fails we unmap and free the vma. However,
the error path fails to undo the ->mmap() call that previously succeeded
and depending on the specific ->mmap() implementation this translates to
reference increments, memory allocations and other operations what will
not be cleaned up.
There are several places (mainly device drivers) where this is an issue.
However, one specific example is bpf_map_mmap() which keeps count of the
mappings in map->writecnt. The count is incremented on ->mmap() and then
decremented on vm_ops->close(). When arch_validate_flags() fails this
count is off since bpf_map_mmap_close() is never called.
One can reproduce this issue in arm64 devices with MTE support. Here the
vm_flags are checked to only allow VM_MTE if VM_MTE_ALLOWED has been set
previously. From userspace then is enough to pass the PROT_MTE flag to
mmap() syscall to trigger the arch_validate_flags() failure.
The following program reproduces this issue:
#include <stdio.h>
#include <unistd.h>
#include <linux/unistd.h>
#include <linux/bpf.h>
#include <sys/mman.h>
int main(void)
{
union bpf_attr attr = {
.map_type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(long long),
.max_entries = 256,
.map_flags = BPF_F_MMAPABLE,
};
int fd;
fd = syscall(__NR_bpf, BPF_MAP_CREATE, &attr, sizeof(attr));
mmap(NULL, 4096, PROT_WRITE | PROT_MTE, MAP_SHARED, fd, 0);
return 0;
}
By manually adding some log statements to the vm_ops callbacks we can
confirm that when passing PROT_MTE to mmap() the map->writecnt is off upon
->release():
With PROT_MTE flag:
root@debian:~# ./bpf-test
[ 111.263874] bpf_map_write_active_inc: map=9 writecnt=1
[ 111.288763] bpf_map_release: map=9 writecnt=1
Without PROT_MTE flag:
root@debian:~# ./bpf-test
[ 157.816912] bpf_map_write_active_inc: map=10 writecnt=1
[ 157.830442] bpf_map_write_active_dec: map=10 writecnt=0
[ 157.832396] bpf_map_release: map=10 writecnt=0
This patch fixes the above issue by calling vm_ops->close() when the
arch_validate_flags() check fails, after this we can proceed to unmap and
free the vma on the error path.
Link: https://lkml.kernel.org/r/20220930003844.1210987-1-cmllamas@google.com
Fixes:
c462ac288f2c ("mm: Introduce arch_validate_flags()")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baolin Wang [Thu, 18 Aug 2022 07:37:43 +0000 (15:37 +0800)]
mm/damon: validate if the pmd entry is present before accessing
commit
c8b9aff419303e4d4219b5ff64b1c7e062dee48e upstream.
pmd_huge() is used to validate if the pmd entry is mapped by a huge page,
also including the case of non-present (migration or hwpoisoned) pmd entry
on arm64 or x86 architectures. This means that pmd_pfn() can not get the
correct pfn number for a non-present pmd entry, which will cause
damon_get_page() to get an incorrect page struct (also may be NULL by
pfn_to_online_page()), making the access statistics incorrect.
This means that the DAMON may make incorrect decision according to the
incorrect statistics, for example, DAMON may can not reclaim cold page
in time due to this cold page was regarded as accessed mistakenly if
DAMOS_PAGEOUT operation is specified.
Moreover it does not make sense that we still waste time to get the page
of the non-present entry. Just treat it as not-accessed and skip it,
which maintains consistency with non-present pte level entries.
So add pmd entry present validation to fix the above issues.
Link: https://lkml.kernel.org/r/58b1d1f5fbda7db49ca886d9ef6783e3dcbbbc98.1660805030.git.baolin.wang@linux.alibaba.com
Fixes:
3f49584b262c ("mm/damon: implement primitives for the virtual memory address spaces")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Morse [Fri, 30 Sep 2022 13:19:59 +0000 (14:19 +0100)]
arm64: errata: Add Cortex-A55 to the repeat tlbi list
commit
171df58028bf4649460fb146a56a58dcb0c8f75a upstream.
Cortex-A55 is affected by an erratum where in rare circumstances the
CPUs may not handle a race between a break-before-make sequence on one
CPU, and another CPU accessing the same page. This could allow a store
to a page that has been unmapped.
Work around this by adding the affected CPUs to the list that needs
TLB sequences to be done twice.
Signed-off-by: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220930131959.3082594-1-james.morse@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 8 Sep 2022 09:51:04 +0000 (11:51 +0200)]
drm/udl: Restore display mode on resume
commit
6d6e732835db92e66c28dbcf258a7e3d3c71420d upstream.
Restore the display mode whne resuming from suspend. Currently, the
display remains dark.
On resume, the CRTC's mode does not change, but the 'active' flag
changes to 'true'. Taking this into account when considering a mode
switch restores the display mode.
The bug is reproducable by using Gnome with udl and observing the
adapter's suspend/resume behavior.
Actually, the whole check added in udl_simple_display_pipe_enable()
about the crtc_state->mode_changed was bogus. We should drop the
whole check and always apply the mode change in this function.
[ tiwai -- Drop the mode_changed check entirely instead, per Daniel's
suggestion ]
Fixes:
997d33c35618 ("drm/udl: Inline DPMS code into CRTC enable and disable functions")
Cc: <stable@vger.kernel.org>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-2-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Thu, 30 Jun 2022 20:07:22 +0000 (23:07 +0300)]
drm/virtio: Use appropriate atomic state in virtio_gpu_plane_cleanup_fb()
commit
4656b3a26a9e9fe5f04bfd2ab55b066266ba7f4d upstream.
Make virtio_gpu_plane_cleanup_fb() to clean the state which DRM core
wants to clean up and not the current plane's state. Normally the older
atomic state is cleaned up, but the newer state could also be cleaned up
in case of aborted commits.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-6-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Thu, 30 Jun 2022 20:07:20 +0000 (23:07 +0300)]
drm/virtio: Unlock reservations on virtio_gpu_object_shmem_init() error
commit
fdf0ff4d12cbcd76b53f27c96ce51ddca400884a upstream.
Unlock reservations in the error code path of virtio_gpu_object_create()
to silence debug warning splat produced by ww_mutex_destroy(&obj->lock)
when GEM is released with the held lock.
Cc: stable@vger.kernel.org
Fixes:
30172efbfb84 ("drm/virtio: blob prep: refactor getting pages and attaching backing")
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-4-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Thu, 30 Jun 2022 20:07:19 +0000 (23:07 +0300)]
drm/virtio: Check whether transferred 2D BO is shmem
commit
e473216b42aa1fd9fc6b94b608b42c210c655908 upstream.
Transferred 2D BO always must be a shmem BO. Add check for that to prevent
NULL dereference if userspace passes a VRAM BO.
Cc: stable@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-3-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dario Binacchi [Wed, 21 Sep 2022 17:05:56 +0000 (19:05 +0200)]
dmaengine: mxs: use platform_driver_register
commit
26696d4657167112a1079f86cba1739765c1360e upstream.
Driver registration fails on SOC imx8mn as its supplier, the clock
control module, is probed later than subsys initcall level. This driver
uses platform_driver_probe which is not compatible with deferred probing
and won't be probed again later if probe function fails due to clock not
being available at that time.
This patch replaces the use of platform_driver_probe with
platform_driver_register which will allow probing the driver later again
when the clock control module will be available.
The __init annotation has been dropped because it is not compatible with
deferred probing. The code is not executed once and its memory cannot be
freed.
Fixes:
a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28")
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220921170556.1055962-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Hamza Mahfooz [Wed, 5 Oct 2022 15:30:38 +0000 (11:30 -0400)]
Revert "drm/amdgpu: use dirty framebuffer helper"
commit
17d819e2828cacca2e4c909044eb9798ed379cd2 upstream.
This reverts commit
66f99628eb24409cb8feb5061f78283c8b65f820.
Unfortunately, that commit causes performance regressions on non-PSR
setups. So, just revert it until FB_DAMAGE_CLIPS support can be added.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216554
Fixes:
66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper")
Fixes:
abbc7a3dafb91b ("drm/amdgpu: don't register a dirty callback for non-atomic")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rishabh Bhatnagar [Tue, 20 Sep 2022 19:19:32 +0000 (19:19 +0000)]
nvme-pci: set min_align_mask before calculating max_hw_sectors
commit
61ce339f19fabbc3e51237148a7ef6f2270e44fa upstream.
If swiotlb is force enabled dma_max_mapping_size ends up calling
swiotlb_max_mapping_size which takes into account the min align mask for
the device. Set the min align mask for nvme driver before calling
dma_max_mapping_size while calculating max hw sectors.
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sagi Grimberg [Thu, 29 Sep 2022 07:36:47 +0000 (10:36 +0300)]
nvme-multipath: fix possible hang in live ns resize with ANA access
commit
72e3b8883a36e80ebfa41015c7b6926ce31ace05 upstream.
When we revalidate paths as part of ns size change (as of commit
e7d65803e2bb), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.
The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.
Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.
A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--
Reported-by: Yogev Cohen <yogev@lightbitslabs.com>
Fixes:
e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gaosheng Cui [Fri, 16 Sep 2022 12:04:02 +0000 (13:04 +0100)]
nvmem: core: Fix memleak in nvmem_register()
commit
bd1244561fa2a4531ded40dbf09c9599084f8b29 upstream.
dev_set_name will alloc memory for nvmem->dev.kobj.name in
nvmem_register, when nvmem_validate_keepouts failed, nvmem's
memory will be freed and return, but nobody will free memory
for nvmem->dev.kobj.name, there will be memleak, so moving
nvmem_validate_keepouts() after device_register() and let
the device core deal with cleaning name in error cases.
Fixes:
de0534df9347 ("nvmem: core: fix error handling while validating keepout regions")
Cc: stable@vger.kernel.org
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916120402.38753-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Tue, 12 Jul 2022 07:52:55 +0000 (15:52 +0800)]
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
commit
16c546e148fa6d14a019431436a6f7b4087dbccd upstream.
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
[ 3.052463] ------------[ cut here ]------------
[ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[ 3.070072] Modules linked in: efivarfs autofs4
[ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[ 3.099465] Stack :
9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[ 3.109127]
9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[ 3.118774]
90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[ 3.128412]
0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[ 3.138056]
0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[ 3.147711]
ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[ 3.157364]
900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[ 3.167012]
0000000000000009 000000000000006c 0000000000000000 0000000000000000
[ 3.176641]
9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[ 3.186260]
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[ 3.195868] ...
[ 3.199917] Call Trace:
[ 3.203941] [<
90000000002086d8>] show_stack+0x38/0x14c
[ 3.210666] [<
9000000000cf846c>] dump_stack_lvl+0x60/0x88
[ 3.217625] [<
900000000023d268>] __warn+0xd0/0x100
[ 3.223958] [<
9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[ 3.231150] [<
9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[ 3.238080] [<
90000000004f578c>] seq_read_iter+0x354/0x4b4
[ 3.245098] [<
90000000004c2e90>] new_sync_read+0x17c/0x1c4
[ 3.252114] [<
90000000004c5174>] vfs_read+0x138/0x1d0
[ 3.258694] [<
90000000004c55f8>] ksys_read+0x70/0x100
[ 3.265265] [<
9000000000cfde9c>] do_syscall+0x7c/0x94
[ 3.271820] [<
9000000000202fe4>] handle_syscall+0xc4/0x160
[ 3.281824] ---[ end trace
8b484262b4b8c24c ]---
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fangrui Song [Sun, 18 Sep 2022 09:29:34 +0000 (02:29 -0700)]
riscv: Pass -mno-relax only on lld < 15.0.0
commit
3cebf80e9a0d3adcb174053be32c88a640b3344b upstream.
lld since llvm:
6611d58f5bbc ("[ELF] Relax R_RISCV_ALIGN"), which will be
included in the 15.0.0 release, has implemented some RISC-V linker
relaxation. -mno-relax is no longer needed in
KBUILD_CFLAGS/KBUILD_AFLAGS to suppress R_RISCV_ALIGN which older lld
can not handle:
ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN
requires unimplemented linker relaxation; recompile with -mno-relax
but the .o is already compiled with -mno-relax
Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20220710071117.446112-1-maskray@google.com/
Link: https://lore.kernel.org/r/20220918092933.19943-1-palmer@rivosinc.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenting Zhang [Fri, 8 Jul 2022 20:38:22 +0000 (16:38 -0400)]
riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb
commit
10f6913c548b32ecb73801a16b120e761c6957ea upstream.
When CONFIG_CMDLINE_FORCE is enabled, cmdline provided by
CONFIG_CMDLINE are always used. This allows CONFIG_CMDLINE to be
used regardless of the result of device tree scanning.
This especially fixes the case where a device tree without the
chosen node is supplied to the kernel. In such cases,
early_init_dt_scan would return true. But inside
early_init_dt_scan_chosen, the cmdline won't be updated as there
is no chosen node in the device tree. As a result, CONFIG_CMDLINE
is not copied into boot_command_line even if CONFIG_CMDLINE_FORCE
is enabled. This commit allows properly update boot_command_line
in this situation.
Fixes:
8fd6e05c7463 ("arch: riscv: support kernel command line forcing when no DTB passed")
Signed-off-by: Wenting Zhang <zephray@outlook.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/PSBPR04MB399135DFC54928AB958D0638B1829@PSBPR04MB3991.apcprd04.prod.outlook.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Bresticker [Thu, 15 Sep 2022 19:37:01 +0000 (15:37 -0400)]
riscv: Make VM_WRITE imply VM_READ
commit
7ab72c597356be1e7f0f3d856e54ce78527f43c8 upstream.
RISC-V does not presently have write-only mappings as that PTE bit pattern
is considered reserved in the privileged spec, so allow handling of read
faults in VMAs that have VM_WRITE without VM_READ in order to be consistent
with other architectures that have similar limitations.
Fixes:
2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-2-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Bresticker [Thu, 15 Sep 2022 19:37:02 +0000 (15:37 -0400)]
riscv: Allow PROT_WRITE-only mmap()
commit
9e2e6042a7ec6504fe8e366717afa2f40cf16488 upstream.
Commit
2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is
invalid") made mmap() return EINVAL if PROT_WRITE was set wihtout
PROT_READ with the justification that a write-only PTE is considered a
reserved PTE permission bit pattern in the privileged spec. This check
is unnecessary since we let VM_WRITE imply VM_READ on RISC-V, and it is
inconsistent with other architectures that don't support write-only PTEs,
creating a potential software portability issue. Just remove the check
altogether and let PROT_WRITE imply PROT_READ as is the case on other
architectures.
Note that this also allows PROT_WRITE|PROT_EXEC mappings which were
disallowed prior to the aforementioned commit; PROT_READ is implied in
such mappings as well.
Fixes:
2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-3-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Fri, 14 Oct 2022 08:13:55 +0000 (10:13 +0200)]
parisc: fbdev/stifb: Align graphics memory size to 4MB
commit
aca7c13d3bee81a968337a5515411409ae9d095d upstream.
Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Thu, 22 Sep 2022 21:56:06 +0000 (22:56 +0100)]
RISC-V: Make port I/O string accessors actually work
commit
9cc205e3c17d5716da7ebb7fa0c985555e95d009 upstream.
Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:
PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
causing a memory access fault:
Unable to handle kernel access to user memory without uaccess routines at virtual address
0000000000001008
Oops [#1]
Modules linked in:
CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23
Hardware name: SiFive HiFive Unmatched A00 (DT)
epc : parport_pc_fifo_write_block_pio+0x266/0x416
ra : parport_pc_fifo_write_block_pio+0xb4/0x416
epc :
ffffffff80542c3e ra :
ffffffff80542a8c sp :
ffffffd88899fc60
gp :
ffffffff80fa2700 tp :
ffffffd882b1e900 t0 :
ffffffd883d0b000
t1 :
ffffffffff000002 t2 :
4646393043330a38 s0 :
ffffffd88899fcf0
s1 :
0000000000001000 a0 :
0000000000000010 a1 :
0000000000000000
a2 :
ffffffd883d0a010 a3 :
0000000000000023 a4 :
00000000ffff8fbb
a5 :
ffffffd883d0a001 a6 :
0000000100000000 a7 :
ffffffc800000000
s2 :
ffffffffff000002 s3 :
ffffffff80d28880 s4 :
ffffffff80fa1f50
s5 :
0000000000001008 s6 :
0000000000000008 s7 :
ffffffd883d0a000
s8 :
0004000000000000 s9 :
ffffffff80dc1d80 s10:
ffffffd8807e4000
s11:
0000000000000000 t3 :
00000000000000ff t4 :
393044410a303930
t5 :
0000000000001000 t6 :
0000000000040000
status:
0000000200000120 badaddr:
0000000000001008 cause:
000000000000000f
[<
ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200
[<
ffffffff8053bbc0>] parport_write+0x46/0xf8
[<
ffffffff8050530e>] lp_write+0x158/0x2d2
[<
ffffffff80185716>] vfs_write+0x8e/0x2c2
[<
ffffffff80185a74>] ksys_write+0x52/0xc2
[<
ffffffff80185af2>] sys_write+0xe/0x16
[<
ffffffff80003770>] ret_from_syscall+0x0/0x2
---[ end trace
0000000000000000 ]---
For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros. Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion. No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes:
fab957c11efe2 ("RISC-V: Atomic and Locking Code")
Cc: stable@vger.kernel.org # v4.15+
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conor Dooley [Fri, 15 Jul 2022 17:51:56 +0000 (18:51 +0100)]
riscv: topology: fix default topology reporting
commit
fbd92809997a391f28075f1c8b5ee314c225557c upstream.
RISC-V has no sane defaults to fall back on where there is no cpu-map
in the devicetree.
Without sane defaults, the package, core and thread IDs are all set to
-1. This causes user-visible inaccuracies for tools like hwloc/lstopo
which rely on the sysfs cpu topology files to detect a system's
topology.
On a PolarFire SoC, which should have 4 harts with a thread each,
lstopo currently reports:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
Core L#0
L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)
Adding calls to store_cpu_topology() in {boot,smp} hart bringup code
results in the correct topolgy being reported:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
CC: stable@vger.kernel.org # 456797da792f: arm64: topology: move store_cpu_topology() to shared code
Fixes:
03f11f03dbfe ("RISC-V: Parse cpu topology during boot.")
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conor Dooley [Fri, 15 Jul 2022 17:51:55 +0000 (18:51 +0100)]
arm64: topology: move store_cpu_topology() to shared code
commit
456797da792fa7cbf6698febf275fe9b36691f78 upstream.
arm64's method of defining a default cpu topology requires only minimal
changes to apply to RISC-V also. The current arm64 implementation exits
early in a uniprocessor configuration by reading MPIDR & claiming that
uniprocessor can rely on the default values.
This is appears to be a hangover from prior to '
3102bc0e6ac7 ("arm64:
topology: Stop using MPIDR for topology information")', because the
current code just assigns default values for multiprocessor systems.
With the MPIDR references removed, store_cpu_topolgy() can be moved to
the common arch_topology code.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Fri, 9 Sep 2022 11:25:29 +0000 (13:25 +0200)]
regulator: qcom_rpm: Fix circular deferral regression
commit
8478ed5844588703a1a4c96a004b1525fbdbdd5e upstream.
On recent kernels, the PM8058 L16 (or any other PM8058 LDO-regulator)
does not come up if they are supplied by an SMPS-regulator. This
is not very strange since the regulators are registered in a long
array and the L-regulators are registered before the S-regulators,
and if an L-regulator defers, it will never get around to registering
the S-regulator that it needs.
See arch/arm/boot/dts/qcom-apq8060-dragonboard.dts:
pm8058-regulators {
(...)
vdd_l13_l16-supply = <&pm8058_s4>;
(...)
Ooops.
Fix this by moving the PM8058 S-regulators first in the array.
Do the same for the PM8901 S-regulators (though this is currently
not causing any problems with out device trees) so that the pattern
of registration order is the same on all PMnnnn chips.
Fixes:
087a1b5cdd55 ("regulator: qcom: Rework to single platform device")
Cc: stable@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220909112529.239143-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Tue, 30 Aug 2022 15:32:46 +0000 (18:32 +0300)]
net: thunderbolt: Enable DMA paths only after rings are enabled
commit
ff7cd07f306406493f7b78890475e85b6d0811ed upstream.
If the other host starts sending packets early on it is possible that we
are still in the middle of populating the initial Rx ring packets to the
ring. This causes the tbnet_poll() to mess over the queue and causes
list corruption. This happens specifically when connected with macOS as
it seems start sending various IP discovery packets as soon as its side
of the paths are configured.
To prevent this we move the DMA path enabling to happen after we have
primed the Rx ring. This makes sure no incoming packets can arrive
before we are ready to handle them.
Fixes:
e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang He [Fri, 16 Sep 2022 15:47:08 +0000 (23:47 +0800)]
hwmon: (gsc-hwmon) Call of_node_get() before of_find_xxx API
commit
7f62cf781e6567d59c8935dc8c6068ce2bb904b7 upstream.
In gsc_hwmon_get_devtree_pdata(), we should call of_node_get() before
the of_find_compatible_node() which will automatically call
of_node_put() for the 'from' argument.
Fixes:
3bce5377ef66 ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Liang He <windhl@126.com>
Co-developed-by: Mengda Chen <chenmengda2009@163.com>
Signed-off-by: Mengda Chen <chenmengda2009@163.com>
Link: https://lore.kernel.org/r/20220916154708.3084515-1-chenmengda2009@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Wed, 21 Sep 2022 14:53:54 +0000 (16:53 +0200)]
ASoC: wcd934x: fix order of Slimbus unprepare/disable
commit
e96bca7eaa5747633ec638b065630ff83728982a upstream.
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes:
a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Wed, 21 Sep 2022 14:53:53 +0000 (16:53 +0200)]
ASoC: wcd9335: fix order of Slimbus unprepare/disable
commit
ea8ef003aa53ad23e7705c5cab1c4e664faa6c79 upstream.
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes:
20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patryk Duda [Tue, 2 Aug 2022 15:41:28 +0000 (17:41 +0200)]
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
commit
f74c7557ed0d321947e8bb4e9d47c1013f8b2227 upstream.
Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.
Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.
The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.
Fixes:
3300fdd630d4 ("platform/chrome: cros_ec: handle MKBP more events flag")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220802154128.21175-1-pdk@semihalf.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Fri, 23 Sep 2022 13:45:52 +0000 (21:45 +0800)]
quota: Check next/prev free block number after reading from quota file
commit
6c8ea8b8cd4722efd419f91ca46a2dc81b7d89a3 upstream.
Following process:
Init: v2_read_file_info: <3> dqi_free_blk 0 dqi_free_entry 5 dqi_blks 6
Step 1. chown bin f_a -> dquot_acquire -> v2_write_dquot:
qtree_write_dquot
do_insert_tree
find_free_dqentry
get_free_dqblk
write_blk(info->dqi_blocks) // info->dqi_blocks = 6, failure. The
content in physical block (corresponding to blk 6) is random.
Step 2. chown root f_a -> dquot_transfer -> dqput_all -> dqput ->
ext4_release_dquot -> v2_release_dquot -> qtree_delete_dquot:
dquot_release
remove_tree
free_dqentry
put_free_dqblk(6)
info->dqi_free_blk = blk // info->dqi_free_blk = 6
Step 3. drop cache (buffer head for block 6 is released)
Step 4. chown bin f_b -> dquot_acquire -> commit_dqblk -> v2_write_dquot:
qtree_write_dquot
do_insert_tree
find_free_dqentry
get_free_dqblk
dh = (struct qt_disk_dqdbheader *)buf
blk = info->dqi_free_blk // 6
ret = read_blk(info, blk, buf) // The content of buf is random
info->dqi_free_blk = le32_to_cpu(dh->dqdh_next_free) // random blk
Step 5. chown bin f_c -> notify_change -> ext4_setattr -> dquot_transfer:
dquot = dqget -> acquire_dquot -> ext4_acquire_dquot -> dquot_acquire ->
commit_dqblk -> v2_write_dquot -> dq_insert_tree:
do_insert_tree
find_free_dqentry
get_free_dqblk
blk = info->dqi_free_blk // If blk < 0 and blk is not an error
code, it will be returned as dquot
transfer_to[USRQUOTA] = dquot // A random negative value
__dquot_transfer(transfer_to)
dquot_add_inodes(transfer_to[cnt])
spin_lock(&dquot->dq_dqb_lock) // page fault
, which will lead to kernel page fault:
Quota error (device sda): qtree_write_dquot: Error -8000 occurred
while creating quota
BUG: unable to handle page fault for address:
ffffffffffffe120
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 5974 Comm: chown Not tainted 6.0.0-rc1-00004
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:_raw_spin_lock+0x3a/0x90
Call Trace:
dquot_add_inodes+0x28/0x270
__dquot_transfer+0x377/0x840
dquot_transfer+0xde/0x540
ext4_setattr+0x405/0x14d0
notify_change+0x68e/0x9f0
chown_common+0x300/0x430
__x64_sys_fchownat+0x29/0x40
In order to avoid accessing invalid quota memory address, this patch adds
block number checking of next/prev free block read from quota file.
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216372
Fixes:
1da177e4c3f4152 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220923134555.2623931-2-chengzhihao1@huawei.com
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andri Yngvason [Wed, 7 Sep 2022 15:01:59 +0000 (15:01 +0000)]
HID: multitouch: Add memory barriers
commit
be6e2b5734a425941fcdcdbd2a9337be498ce2cf upstream.
This fixes broken atomic checks which cause a race between the
release-timer and processing of hid input.
I noticed that contacts were sometimes sticking, even with the "sticky
fingers" quirk enabled. This fixes that problem.
Cc: stable@vger.kernel.org
Fixes:
9609827458c3 ("HID: multitouch: optimize the sticky fingers timer")
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220907150159.2285460-1-andri@yngvason.is
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Aring [Mon, 15 Aug 2022 19:43:15 +0000 (15:43 -0400)]
fs: dlm: handle -EBUSY first in lock arg validation
commit
44637ca41d551d409a481117b07fa209b330fca9 upstream.
During lock arg validation, first check for -EBUSY cases, then for
-EINVAL cases. The -EINVAL checks look at lkb state variables
which are not stable when an lkb is busy and would cause an
-EBUSY result, e.g. lkb->lkb_grmode.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Aring [Mon, 15 Aug 2022 19:43:14 +0000 (15:43 -0400)]
fs: dlm: fix race between test_bit() and queue_work()
commit
eef6ec9bf390e836a6c4029f3620fe49528aa1fe upstream.
This patch fixes a race by using ls_cb_mutex around the bit
operations and conditional code blocks for LSFL_CB_DELAY.
The function dlm_callback_stop() expects to stop all callbacks and
flush all currently queued onces. The set_bit() is not enough because
there can still be queue_work() after the workqueue was flushed.
To avoid queue_work() after set_bit(), surround both by ls_cb_mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jarkko Nikula [Tue, 27 Sep 2022 13:56:44 +0000 (16:56 +0300)]
i2c: designware: Fix handling of real but unexpected device interrupts
commit
301c8f5c32c8fb79c67539bc23972dc3ef48024c upstream.
Commit
c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI
IDs") caused a regression on certain Gigabyte motherboards for Intel
Alder Lake-S where system crashes to NULL pointer dereference in
i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep").
I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made
following notes:
- Issue happens when resuming from S3 but not when resuming from
"s2idle"
- PCI device 00:15.0 == i2c_designware.0 is already in D0 state when
system enters into pci_pm_resume_noirq() while all other i2c_designware
PCI devices are in D3. Devices were runtime suspended and in D3 prior
entering into suspend
- Interrupt comes after pci_pm_resume_noirq() when device interrupts are
re-enabled
- According to register dump the interrupt really comes from the
i2c_designware.0. Controller is enabled, I2C target address register
points to a one detectable I2C device address 0x60 and the
DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and
TX_EMPTY bits are set indicating completed I2C transaction.
My guess is that the firmware uses this controller to communicate with
an on-board I2C device during resume but does not disable the controller
before giving control to an operating system.
I was told the UEFI update fixes this but never the less it revealed the
driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device
is supposed to be idle and state variables are not set (especially the
dev->msgs pointer which may point to NULL or stale old data).
Introduce a new software status flag STATUS_ACTIVE indicating when the
controller is active in driver point of view. Now treat all interrupts
that occur when is not set as unexpected and mask all interrupts from
the controller.
Fixes:
c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs")
Reported-by: Samuel Clark <slc2015@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215907
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenchao Chen [Tue, 11 Oct 2022 10:49:35 +0000 (18:49 +0800)]
mmc: sdhci-sprd: Fix minimum clock limit
commit
6e141772e6465f937458b35ddcfd0a981b6f5280 upstream.
The Spreadtrum controller supports 100KHz minimal clock rate, which means
that the current value 400KHz is wrong.
Unfortunately this has also lead to fail to initialize some cards, which
are allowed to require 100KHz to work. So, let's fix the problem by
changing the minimal supported clock rate to 100KHz.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes:
fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221011104935.10980-1-wenchao.chen666@gmail.com
[Ulf: Clarified to commit-message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Mon, 10 Oct 2022 15:08:29 +0000 (17:08 +0200)]
can: kvaser_usb_leaf: Fix CAN state after restart
commit
0be1a655fe68c8e6dcadbcbddb69cf2fb29881f5 upstream.
can_restart() expects CMD_START_CHIP to set the error state to
ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards.
Otherwise the user may immediately trigger restart again and hit a
BUG_ON() in can_restart().
Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state.
Cc: stable@vger.kernel.org
Fixes:
080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Mon, 10 Oct 2022 15:08:28 +0000 (17:08 +0200)]
can: kvaser_usb_leaf: Fix TX queue out of sync after restart
commit
455561fb618fde40558776b5b8435f9420f335db upstream.
The TX queue seems to be implicitly flushed by the hardware during
bus-off or bus-off recovery, but the driver does not reset the TX
bookkeeping.
Despite not resetting TX bookkeeping the driver still re-enables TX
queue unconditionally, leading to "cannot find free context" /
NETDEV_TX_BUSY errors if the TX queue was full at bus-off time.
Fix that by resetting TX bookkeeping on CAN restart.
Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.
Cc: stable@vger.kernel.org
Fixes:
080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Mon, 10 Oct 2022 15:08:26 +0000 (17:08 +0200)]
can: kvaser_usb_leaf: Fix overread with an invalid command
commit
1499ecaea9d2ba68d5e18d80573b4561a8dc4ee7 upstream.
For command events read from the device,
kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not
exceed the size of the received data, but the actual kvaser_cmd handlers
will happily read any kvaser_cmd fields without checking for cmd->len.
This can cause an overread if the last cmd in the buffer is shorter than
expected for the command type (with cmd->len showing the actual short
size).
Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of
which are delivered to userspace as-is.
Fix that by verifying the length of command before handling it.
This issue can only occur after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org
Fixes:
080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Mon, 10 Oct 2022 15:08:27 +0000 (17:08 +0200)]
can: kvaser_usb: Fix use of uninitialized completion
commit
cd7f30e174d09a02ca2afa5ef093fb0f0352e0d8 upstream.
flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and
completed when the device sends CMD_FLUSH_QUEUE_RESP.
This causes completion of uninitialized completion if the device sends
CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a
response to a flush by a previously bound driver, or a misbehaving
device).
Fix that by initializing flush_comp in kvaser_usb_init_one() like the
other completions.
This issue is only triggerable after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org
Fixes:
aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean-Francois Le Fillatre [Tue, 27 Sep 2022 07:34:07 +0000 (09:34 +0200)]
usb: add quirks for Lenovo OneLink+ Dock
commit
37d49519b41405b08748392c6a7f193d9f77ecd2 upstream.
The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers:
17ef:1018 upstream
17ef:1019 downstream
These hubs suffer from two separate problems:
1) After the host system was suspended and woken up, the hubs appear to
be in a random state. Some downstream ports (both internal to the
built-in audio and network controllers, and external to USB sockets)
may no longer be functional. The exact list of disabled ports (if
any) changes from wakeup to wakeup. Ports remain in that state until
the dock is power-cycled, or until the laptop is rebooted.
Wakeup sources connected to the hubs (keyboard, WoL on the integrated
gigabit controller) will wake the system up from suspend, but they
may no longer work after wakeup (and in that case will no longer work
as wakeup source in a subsequent suspend-wakeup cycle).
This issue appears in the logs with messages such as:
usb 1-6.1-port4: cannot disable (err = -71)
usb 1-6-port2: cannot disable (err = -71)
usb 1-6.1: clear tt 1 (80c0) error -71
usb 1-6-port4: cannot disable (err = -71)
usb 1-6.4: PM: dpm_run_callback(): usb_dev_resume+0x0/0x10 [usbcore] returns -71
usb 1-6.4: PM: failed to resume async: error -71
usb 1-7: reset full-speed USB device number 5 using xhci_hcd
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-6.1-port1: cannot disable (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-6.1-port1: cannot disable (err = -71)
2) Some USB devices cannot be enumerated properly. So far I have only
seen the issue with USB 3.0 devices. The same devices work without
problem directly connected to the host system, to other systems or to
other hubs (even when those hubs are connected to the OneLink+ dock).
One very reliable reproducer is this USB 3.0 HDD enclosure:
152d:9561 JMicron Technology Corp. / JMicron USA Technology Corp. Mobius
I have seen it happen sporadically with other USB 3.0 enclosures,
with controllers from different manufacturers, all self-powered.
Typical messages in the logs:
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 6, error -62
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 7, error -62
usb 2-1-port4: attempt power cycle
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 8, error -62
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 9, error -62
usb 2-1-port4: unable to enumerate USB device
Through trial and error, I found that the USB_QUIRK_RESET_RESUME solved
the second issue. Further testing then uncovered the first issue. Test
results are summarized in this table:
=======================================================================================
Settings USB2 hotplug USB3 hotplug State after waking up
---------------------------------------------------------------------------------------
power/control=auto works fails broken
usbcore.autosuspend=-1 works works broken
OR power/control=on
power/control=auto works (1) works (1) works
and USB_QUIRK_RESET_RESUME
power/control=on works works works
and USB_QUIRK_RESET_RESUME
HUB_QUIRK_DISABLE_AUTOSUSPEND works works works
and USB_QUIRK_RESET_RESUME
=======================================================================================
In those results, the power/control settings are applied to both hubs,
both on the USB2 and USB3 side, before each test.
From those results, USB_QUIRK_RESET_RESUME is required to reset the hubs
properly after a suspend-wakeup cycle, and the hubs must not autosuspend
to work around the USB3 issue.
A secondary effect of USB_QUIRK_RESET_RESUME is to prevent the hubs'
upstream links from suspending (the downstream ports can still suspend).
This secondary effect is used in results (1). It is enough to solve the
USB3 problem.
Setting USB_QUIRK_RESET_RESUME on those hubs is the smallest patch that
solves both issues.
Prior to creating this patch, I have used the USB_QUIRK_RESET_RESUME via
the kernel command line for over a year without noticing any side
effect.
Thanks to Oliver Neukum @Suse for explanations of the operations of
USB_QUIRK_RESET_RESUME, and requesting more testing.
Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220927073407.5672-1-jflf_kernel@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael Mendonca [Wed, 21 Sep 2022 12:34:46 +0000 (15:34 +0300)]
xhci: dbc: Fix memory leak in xhci_alloc_dbc()
commit
d591b32e519603524a35b172156db71df9116902 upstream.
If DbC is already in use, then the allocated memory for the xhci_dbc struct
doesn't get freed before returning NULL, which leads to a memleak.
Fixes:
534675942e90 ("xhci: dbc: refactor xhci_dbc_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eddie James [Thu, 15 Sep 2022 19:57:19 +0000 (14:57 -0500)]
iio: pressure: dps310: Reset chip after timeout
commit
7b4ab4abcea4c0c10b25187bf2569e5a07e9a20c upstream.
The DPS310 chip has been observed to get "stuck" such that pressure
and temperature measurements are never indicated as "ready" in the
MEAS_CFG register. The only solution is to reset the device and try
again. In order to avoid continual failures, use a boolean flag to
only try the reset after timeout once if errors persist.
Fixes:
ba6ec48e76bc ("iio: Add driver for Infineon DPS310")
Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-3-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eddie James [Thu, 15 Sep 2022 19:57:18 +0000 (14:57 -0500)]
iio: pressure: dps310: Refactor startup procedure
commit
c2329717bdd3fa62f8a2f3d8d85ad0bee4556bd7 upstream.
Move the startup procedure into a function, and correct a missing
check on the return code for writing the PRS_CFG register.
Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nuno Sá [Mon, 12 Sep 2022 08:12:21 +0000 (10:12 +0200)]
iio: adc: ad7923: fix channel readings for some variants
commit
f4f43f01cff2f29779343ade755191afd2581c77 upstream.
Some of the supported devices have 4 or 2 LSB trailing bits that should
not be taken into account. Hence we need to shift these bits out which
fits perfectly on the scan type shift property. This change fixes both
raw and buffered reads.
Fixes:
f2f7a449707e ("iio:adc:ad7923: Add support for the ad7904/ad7914/ad7924")
Fixes:
851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220912081223.173584-2-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Mon, 15 Aug 2022 09:16:47 +0000 (09:16 +0000)]
iio: ltc2497: Fix reading conversion results
commit
7f4f1096d5921f5d90547596f9ce80e0b924f887 upstream.
After the result of the previous conversion is read the chip
automatically starts a new conversion and doesn't accept new i2c
transfers until this conversion is completed which makes the function
return failure.
So add an early return iff the programming of the new address isn't
needed. Note this will not fix the problem in general, but all cases
that are currently used. Once this changes we get the failure back, but
this can be addressed when the need arises.
Fixes:
69548b7c2c4f ("iio: adc: ltc2497: split protocol independent part in a separate module ")
Reported-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Denys Zagorui <dzagorui@cisco.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220815091647.1523532-1-dzagorui@cisco.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Hennerich [Tue, 13 Sep 2022 07:34:12 +0000 (09:34 +0200)]
iio: dac: ad5593r: Fix i2c read protocol requirements
commit
558a25f903b4af6361b7fbeea08a6446a0745653 upstream.
For reliable operation across the full range of supported
interface rates, the AD5593R needs a STOP condition between
address write, and data read (like show in the datasheet Figure 40)
so in turn i2c_smbus_read_word_swapped cannot be used.
While at it, a simple helper was added to make the code simpler.
Fixes:
56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913073413.140475-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Xiaoxu [Mon, 26 Sep 2022 03:36:29 +0000 (11:36 +0800)]
cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message
commit
e98ecc6e94f4e6d21c06660b0f336df02836694f upstream.
Commit
d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
extend the dialects from 3 to 4, but forget to decrease the extended
length when specific the dialect, then the message length is larger
than expected.
This maybe leak some info through network because not initialize the
message body.
After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is
reduced from 28 bytes to 26 bytes.
Fixes:
d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: <stable@vger.kernel.org>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ronnie Sahlberg [Tue, 20 Sep 2022 04:32:02 +0000 (14:32 +1000)]
cifs: destage dirty pages before re-reading them for cache=none
commit
bb44c31cdcac107344dd2fcc3bd0504a53575c51 upstream.
This is the opposite case of kernel bugzilla 216301.
If we mmap a file using cache=none and then proceed to update the mmapped
area these updates are not reflected in a later pread() of that part of the
file.
To fix this we must first destage any dirty pages in the range before
we allow the pread() to proceed.
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gaurav Kohli [Thu, 6 Oct 2022 05:52:59 +0000 (22:52 -0700)]
hv_netvsc: Fix race between VF offering and VF association message from host
commit
365e1ececb2905f94cc10a5817c5b644a32a3ae2 upstream.
During vm boot, there might be possibility that vf registration
call comes before the vf association from host to vm.
And this might break netvsc vf path, To prevent the same block
vf registration until vf bind message comes from host.
Cc: stable@vger.kernel.org
Fixes:
00d7ddba11436 ("hv_netvsc: pair VF based on serial number")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Begunkov [Thu, 29 Sep 2022 21:23:18 +0000 (22:23 +0100)]
io_uring/net: don't update msg_name if not provided
commit
6f10ae8a155446248055c7ddd480ef40139af788 upstream.
io_sendmsg_copy_hdr() may clear msg->msg_name if the userspace didn't
provide it, we should retain NULL in this case.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/97d49f61b5ec76d0900df658cfde3aa59ff22121.1664486545.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tudor Ambarus [Thu, 28 Jul 2022 07:40:14 +0000 (10:40 +0300)]
mtd: rawnand: atmel: Unmap streaming DMA mappings
commit
1161703c9bd664da5e3b2eb1a3bb40c210e026ea upstream.
Every dma_map_single() call should have its dma_unmap_single() counterpart,
because the DMA address space is a shared resource and one could render the
machine unusable by consuming all DMA addresses.
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Cc: stable@vger.kernel.org
Fixes:
f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
Reported-by: Peter Rosin <peda@axentia.se>
Tested-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220728074014.145406-1-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saranya Gopal [Tue, 11 Oct 2022 04:49:16 +0000 (10:19 +0530)]
ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
commit
4f2e56a59b9947b3e698d3cabcb858765c12b1e8 upstream.
This patch fixes the issue with 3.5mm headset keys
on RPL-P platform.
[ Rearranged the entry in SSID order by tiwai ]
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Ninad Naik <ninad.naik@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011044916.2278867-1-saranya.gopal@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luke D. Jones [Mon, 10 Oct 2022 07:03:47 +0000 (20:03 +1300)]
ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
commit
2ea8e1297801f7b0220ebf6ae61a5b74ca83981e upstream.
The ASUS ROG X16 (GV601R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.
Add a quirk to use the same DAC pairs as the G14.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010070347.36883-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luke D. Jones [Mon, 10 Oct 2022 06:57:02 +0000 (19:57 +1300)]
ALSA: hda/realtek: Correct pin configs for ASUS G533Z
commit
66ba7c88507344dee68ad1acbdb630473ab36114 upstream.
The initial fix for ASUS G533Z was based on faulty information. This
fixes the pincfg to values that have been verified with no existing
module options or other hacks enabled.
Enables headphone jack, and 5.1 surround.
[ corrected the indent level by tiwai ]
Fixes:
bc2c23549ccd ("ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010065702.35190-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Callum Osmotherly [Wed, 5 Oct 2022 07:14:16 +0000 (17:44 +1030)]
ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
commit
417b9c51f59734d852e47252476fadc293ad994a upstream.
After some feedback from users with Dell Precision 5530 machines, this
patch reverts the previous change to add ALC289_FIXUP_DUAL_SPK.
While it improved the speaker output quality, it caused the headphone
jack to have an audible "pop" sound when power saving was toggled.
Fixes:
1885ff13d4c4 ("ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop")
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Yz0uyN1zwZhnyRD6@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 30 Sep 2022 10:01:29 +0000 (12:01 +0200)]
ALSA: usb-audio: Fix NULL dererence at error path
commit
568be8aaf8a535f79c4db76cabe17b035aa2584d upstream.
At an error path to release URB buffers and contexts, the driver might
hit a NULL dererence for u->urb pointer, when u->buffer_size has been
already set but the actual URB allocation failed.
Fix it by adding the NULL check of urb. Also, make sure that
buffer_size is cleared after the error path or the close.
Cc: <stable@vger.kernel.org>
Reported-by: Sabri N. Ferreiro <snferreiro1@gmail.com>
Link: https://lore.kernel.org/r/CAKG+3NRjTey+fFfUEGwuxL-pi_=T4cUskYG9OzpzHytF+tzYng@mail.gmail.com
Link: https://lore.kernel.org/r/20220930100129.19445-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 30 Sep 2022 10:01:51 +0000 (12:01 +0200)]
ALSA: usb-audio: Fix potential memory leaks
commit
6382da0828995af87aa8b8bef28cc61aceb4aff3 upstream.
When the driver hits -ENOMEM at allocating a URB or a buffer, it
aborts and goes to the error path that releases the all previously
allocated resources. However, when -ENOMEM hits at the middle of the
sync EP URB allocation loop, the partially allocated URBs might be
left without released, because ep->nurbs is still zero at that point.
Fix it by setting ep->nurbs at first, so that the error handler loops
over the full URB list.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220930100151.19461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 11 Oct 2022 07:01:46 +0000 (09:01 +0200)]
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
commit
a70aef7982b012e86dfd39fbb235e76a21ae778a upstream.
The register_mutex taken around the dev_unregister callback call in
snd_rawmidi_free() may potentially lead to a mutex deadlock, when OSS
emulation and a hot unplug are involved.
Since the mutex doesn't protect the actual race (as the registration
itself is already protected by another means), let's drop it.
Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 11 Oct 2022 07:01:47 +0000 (09:01 +0200)]
ALSA: oss: Fix potential deadlock at unregistration
commit
97d917879d7f92df09c3f21fd54609a8bcd654b2 upstream.
We took sound_oss_mutex around the calls of unregister_sound_special()
at unregistering OSS devices. This may, however, lead to a deadlock,
because we manage the card release via the card's device object, and
the release may happen at unregister_sound_special() call -- which
will take sound_oss_mutex again in turn.
Although the deadlock might be fixed by relaxing the rawmidi mutex in
the previous commit, it's safer to move unregister_sound_special()
calls themselves out of the sound_oss_mutex, too. The call is
race-safe as the function has a spinlock protection by itself.
Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sasha Levin [Sat, 15 Oct 2022 11:18:38 +0000 (07:18 -0400)]
Revert "fs: check FMODE_LSEEK to control internal pipe splicing"
This reverts commit
fd0a6e99b61e6c08fa5cf585d54fd956f70c73a6.
Which was upstream commit
97ef77c52b789ec1411d360ed99dca1efe4b2c81.
The commit is missing dependencies and breaks NFS tests, remove it for
now.
Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Sat, 15 Oct 2022 05:59:05 +0000 (07:59 +0200)]
Linux 5.15.74
Link: https://lore.kernel.org/r/20221013175143.518476113@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221014082515.704103805@linuxfoundation.org
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Thu, 13 Oct 2022 18:16:01 +0000 (20:16 +0200)]
wifi: mac80211: fix MBSSID parsing use-after-free
commit
ff05d4b45dd89b922578dac497dcabf57cf771c6
When we parse a multi-BSSID element, we might point some
element pointers into the allocated nontransmitted_profile.
However, we free this before returning, causing UAF when the
relevant pointers in the parsed elements are accessed.
Fix this by not allocating the scratch buffer separately but
as part of the returned structure instead, that way, there
are no lifetime issues with it.
The scratch buffer introduction as part of the returned data
here is taken from MLO feature work done by Ilan.
This fixes CVE-2022-42719.
Fixes:
5023b14cf4df ("mac80211: support profile split between elements")
Co-developed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>