Shyam Prasad N [Tue, 14 Mar 2023 11:14:58 +0000 (11:14 +0000)]
cifs: account for primary channel in the interface list
[ Upstream commit
fa1d0508bdd4a68c5e40f85f635712af8c12f180 ]
The refcounting of server interfaces should account
for the primary channel too. Although this is not
strictly necessary, doing so will account for the primary
channel in DebugData.
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shyam Prasad N [Mon, 26 Dec 2022 11:24:56 +0000 (11:24 +0000)]
cifs: distribute channels across interfaces based on speed
[ Upstream commit
a6d8fb54a515f0546ffdb7870102b1238917e567 ]
Today, if the server interfaces RSS capable, we simply
choose the fastest interface to setup a channel. This is not
a scalable approach, and does not make a lot of attempt to
distribute the connections.
This change does a weighted distribution of channels across
all the available server interfaces, where the weight is
a function of the advertised interface speed.
Also make sure that we don't mix rdma and non-rdma for channels.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of:
fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Mon, 6 Nov 2023 11:06:53 +0000 (12:06 +0100)]
Revert "phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY"
commit
7a784bcdd7e54f0599da3b2360e472238412623e upstream.
This reverts commit
134e6d25f6bd06071e5aac0a7eefcea6f7713955.
The recently added Realtek PHY drivers depend on the new port status
notification mechanism which was built on the deprecated USB PHY
implementation and devicetree binding.
Specifically, using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property which is clearly wrong.
We should not be building new functionality on top of the legacy USB PHY
implementation even if it is currently stuck in some kind of
transitional limbo.
Revert the new Realtek PHY drivers for now so that the port status
notification interface can be reverted and replaced.
Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY")
Cc: stable@vger.kernel.org # 6.6
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231106110654.31090-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 6 Nov 2023 11:06:52 +0000 (12:06 +0100)]
Revert "phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY"
commit
258ea41c926b7b3a16d0d7aa210a1401c4a1601b upstream.
This reverts commit
adda6e82a7de7d6d478f6c8ef127f0ac51c510a1.
The recently added Realtek PHY drivers depend on the new port status
notification mechanism which was built on the deprecated USB PHY
implementation and devicetree binding.
Specifically, using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property which is clearly wrong.
We should not be building new functionality on top of the legacy USB PHY
implementation even if it is currently stuck in some kind of
transitional limbo.
Revert the new Realtek PHY drivers for now so that the port status
notification interface can be reverted and replaced.
Fixes: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY")
Cc: stable@vger.kernel.org # 6.6
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231106110654.31090-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 6 Nov 2023 11:06:54 +0000 (12:06 +0100)]
Revert "usb: phy: add usb phy notify port status API"
commit
1a229d8690a0f8951fc4aa8b76a7efab0d8de342 upstream.
This reverts commit
a08799cf17c22375752abfad3b4a2b34b3acb287.
The recently added Realtek PHY drivers depend on the new port status
notification mechanism which was built on the deprecated USB PHY
implementation and devicetree binding.
Specifically, using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property which is clearly wrong.
We should not be building new functionality on top of the legacy USB PHY
implementation even if it is currently stuck in some kind of
transitional limbo.
Revert the new notification interface which is broken by design.
Fixes: a08799cf17c2 ("usb: phy: add usb phy notify port status API")
Cc: stable@vger.kernel.org # 6.6
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231106110654.31090-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Long Li [Sun, 19 Nov 2023 16:23:43 +0000 (08:23 -0800)]
hv_netvsc: Mark VF as slave before exposing it to user-mode
commit
c807d6cd089d2f4951baa838081ec5ae3e2360f8 upstream.
When a VF is being exposed form the kernel, it should be marked as "slave"
before exposing to the user-mode. The VF is not usable without netvsc
running as master. The user-mode should never see a VF without the "slave"
flag.
This commit moves the code of setting the slave flag to the time before
VF is exposed to user-mode.
Cc: stable@vger.kernel.org
Fixes: 0c195567a8f6 ("netvsc: transparent VF management")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haiyang Zhang [Sun, 19 Nov 2023 16:23:42 +0000 (08:23 -0800)]
hv_netvsc: Fix race of register_netdevice_notifier and VF register
commit
85520856466ed6bc3b1ccb013cddac70ceb437db upstream.
If VF NIC is registered earlier, NETDEV_REGISTER event is replayed,
but NETDEV_POST_INIT is not.
Move register_netdevice_notifier() earlier, so the call back
function is set before probing.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haiyang Zhang [Sun, 19 Nov 2023 16:23:41 +0000 (08:23 -0800)]
hv_netvsc: fix race of netvsc and VF register_netdevice
commit
d30fb712e52964f2cf9a9c14cf67078394044837 upstream.
The rtnl lock also needs to be held before rndis_filter_device_add()
which advertises nvsp_2_vsc_capability / sriov bit, and triggers
VF NIC offering and registering. If VF NIC finished register_netdev()
earlier it may cause name based config failure.
To fix this issue, move the call to rtnl_lock() before
rndis_filter_device_add(), so VF will be registered later than netvsc
/ synthetic NIC, and gets a name numbered (ethX) after netvsc.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Hayhurst [Tue, 14 Nov 2023 11:38:08 +0000 (11:38 +0000)]
platform/x86: ideapad-laptop: Set max_brightness before using it
commit
7a3c36eef9a5d13b16aa954da54224c9c6bed339 upstream.
max_brightness is used in ideapad_kbd_bl_brightness_get() before it's set,
causing ideapad_kbd_bl_brightness_get() to return -EINVAL sometimes.
Fixes: ecaa1867b524 ("platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol")
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231114114055.6220-2-stuart.a.hayhurst@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shyam Sundar S K [Thu, 16 Nov 2023 17:01:21 +0000 (22:31 +0530)]
platform/x86/amd/pmc: adjust getting DRAM size behavior
commit
c6ea14d557343cd3af6c6be2f5a78c98bdb281bb upstream.
amd_pmc_get_dram_size() is used to get the DRAM size information. But
in the current code, mailbox command to get the DRAM size info is sent
based on the values of dev->major and dev->minor.
But dev->major and dev->minor will have either junk or zero assigned to
them until at least once a call to amd_pmc_get_smu_version() is made
which ideally populates dev->major and dev->minor.
However, adding a amd_pmc_get_smu_version() call to
amd_pmc_get_dram_size() has a downside of elevating the boot times.
After talking to the PMFW team, it's understood that the "get dram
size" mbox command would only be supported on specific platforms (like
Mendocino) and not all. So, adjust getting DRAM size behavior such
that,
- if running on Rembrandt or Mendocino and the underlying PMFW knows
how to execute the "get dram size" command it shall give the custom
dram size.
- if the underlying FW does not report the dram size, we just proceed
further and assign the default dram size.
The simplest way to address this is to remove amd_pmc_get_dram_size()
function and directly call the "get dram size" command in the
amd_pmc_s2d_init().
Reported-by: Mark Hasemeyer <markhas@chromium.org>
Fixes: be8325fb3d8c ("platform/x86/amd: pmc: Get STB DRAM size from PMFW")
Cc: stable@vger.kernel.org
Suggested-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231116170121.3372222-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Asuna Yang [Wed, 22 Nov 2023 14:18:03 +0000 (22:18 +0800)]
USB: serial: option: add Luat Air72*U series products
commit
da90e45d5afc4da2de7cd3ea7943d0f1baa47cc2 upstream.
Update the USB serial option driver support for Luat Air72*U series
products.
ID 1782:4e00 Spreadtrum Communications Inc. UNISOC-8910
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4e00 Rev=00.00
S: Manufacturer=UNISOC
S: Product=UNISOC-8910
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
If#= 2: AT
If#= 3: PPP + AT
If#= 4: Debug
Co-developed-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Asuna Yang <SpriteOvO@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Eichenberger [Mon, 13 Nov 2023 14:59:21 +0000 (15:59 +0100)]
usb: misc: onboard-hub: add support for Microchip USB5744
commit
6972b38ca05235f6142715db7062ecc87a422e22 upstream.
Add support for the Microchip USB5744 USB3.0 and USB2.0 Hub.
The Microchip USB5744 supports two power supplies, one for 1V2 and one
for 3V3. According to the datasheet there is no need for a delay between
power on and reset, so this value is set to 0.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: stable <stable@kernel.org>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20231113145921.30104-3-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Eichenberger [Mon, 13 Nov 2023 14:59:20 +0000 (15:59 +0100)]
dt-bindings: usb: microchip,usb5744: Add second supply
commit
d0c930b745cafde8e7d25d0356c648bca669556a upstream.
The USB5744 has two power supplies one for 3V3 and one for 1V2. Add the
second supply to the USB5744 DT binding.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231113145921.30104-2-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harshit Mogalapalli [Mon, 13 Nov 2023 20:07:39 +0000 (12:07 -0800)]
platform/x86: hp-bioscfg: Fix error handling in hp_add_other_attributes()
commit
f40f939917b2b4cbf18450096c0ce1c58ed59fae upstream.
'attr_name_kobj' is allocated using kzalloc, but on all the error paths
it is not freed, hence we have a memory leak.
Fix the error path before kobject_init_and_add() by adding kfree().
kobject_put() must be always called after passing the object to
kobject_init_and_add(). Only the error path which is immediately next
to kobject_init_and_add() calls kobject_put() and not any other error
path after it.
Fix the error handling after kobject_init_and_add() by moving the
kobject_put() into the goto label err_other_attr_init that is already
used by all the error paths after kobject_init_and_add().
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Cc: stable@vger.kernel.org # 6.6.x: c5dbf0416000: platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
Cc: stable@vger.kernel.org # 6.6.x: 5736aa9537c9: platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309201412.on0VXJGo-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ij: Added the stable dep tags]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-3-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harshit Mogalapalli [Mon, 13 Nov 2023 20:07:38 +0000 (12:07 -0800)]
platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
commit
5736aa9537c9b8927dec32d3d47c8c31fe560f62 upstream.
attr_name_kobj's memory allocation is done with mutex_lock() held, this
is not needed.
Move allocation outside of mutex_lock() so unlock is not needed when
allocation fails.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harshit Mogalapalli [Mon, 13 Nov 2023 20:07:37 +0000 (12:07 -0800)]
platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
commit
c5dbf04160005e07e8ca7232a7faa77ab1547ae0 upstream.
All cases in switch-case have a same goto on error, move the return
check out of the switch. This is a cleanup.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Höppner [Wed, 25 Oct 2023 13:24:37 +0000 (15:24 +0200)]
s390/dasd: protect device queue against concurrent access
commit
db46cd1e0426f52999d50fa72cfa97fa39952885 upstream.
In dasd_profile_start() the amount of requests on the device queue are
counted. The access to the device queue is unprotected against
concurrent access. With a lot of parallel I/O, especially with alias
devices enabled, the device queue can change while dasd_profile_start()
is accessing the queue. In the worst case this leads to a kernel panic
due to incorrect pointer accesses.
Fix this by taking the device lock before accessing the queue and
counting the requests. Additionally the check for a valid profile data
pointer can be done earlier to avoid unnecessary locking in a hot path.
Cc: <stable@vger.kernel.org>
Fixes: 4fa52aa7a82f ("[S390] dasd: add enhanced DASD statistics interface")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20231025132437.1223363-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Charles Mirabile [Mon, 20 Nov 2023 10:55:45 +0000 (05:55 -0500)]
io_uring/fs: consider link->flags when getting path for LINKAT
commit
8479063f1fbee201a8739130e816cc331b675838 upstream.
In order for `AT_EMPTY_PATH` to work as expected, the fact
that the user wants that behavior needs to make it to `getname_flags`
or it will return ENOENT.
Fixes: cf30da90bc3a ("io_uring: add support for IORING_OP_LINKAT")
Cc: <stable@vger.kernel.org>
Link: https://github.com/axboe/liburing/issues/995
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Link: https://lore.kernel.org/r/20231120105545.1209530-1-cmirabil@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mingzhe Zou [Mon, 20 Nov 2023 05:25:00 +0000 (13:25 +0800)]
bcache: fixup multi-threaded bch_sectors_dirty_init() wake-up race
commit
2faac25d7958c4761bb8cec54adb79f806783ad6 upstream.
We get a kernel crash about "unable to handle kernel paging request":
```dmesg
[368033.032005] BUG: unable to handle kernel paging request at
ffffffffad9ae4b5
[368033.032007] PGD
fc3a0d067 P4D
fc3a0d067 PUD
fc3a0e063 PMD
8000000fc38000e1
[368033.032012] Oops: 0003 [#1] SMP PTI
[368033.032015] CPU: 23 PID: 55090 Comm: bch_dirtcnt[0] Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.es8_24.x86_64 #1
[368033.032017] Hardware name: Tsinghua Tongfang THTF Chaoqiang Server/072T6D, BIOS 2.4.3 01/17/2017
[368033.032027] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
[368033.032029] Code: 8b 02 48 85 c0 74 f6 48 89 c1 eb d0 c1 e9 12 83 e0
03 83 e9 01 48 c1 e0 05 48 63 c9 48 05 c0 3d 02 00 48 03 04 cd 60 68 93
ad <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 02
[368033.032031] RSP: 0018:
ffffbb48852abe00 EFLAGS:
00010082
[368033.032032] RAX:
ffffffffad9ae4b5 RBX:
0000000000000246 RCX:
0000000000003bf3
[368033.032033] RDX:
ffff97b0ff8e3dc0 RSI:
0000000000600000 RDI:
ffffbb4884743c68
[368033.032034] RBP:
0000000000000001 R08:
0000000000000000 R09:
000007ffffffffff
[368033.032035] R10:
ffffbb486bb01000 R11:
0000000000000001 R12:
ffffffffc068da70
[368033.032036] R13:
0000000000000003 R14:
0000000000000000 R15:
0000000000000000
[368033.032038] FS:
0000000000000000(0000) GS:
ffff97b0ff8c0000(0000) knlGS:
0000000000000000
[368033.032039] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[368033.032040] CR2:
ffffffffad9ae4b5 CR3:
0000000fc3a0a002 CR4:
00000000003626e0
[368033.032042] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[368033.032043] bcache: bch_cached_dev_attach() Caching rbd479 as bcache462 on set
8cff3c36-4a76-4242-afaa-
7630206bc70b
[368033.032045] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[368033.032046] Call Trace:
[368033.032054] _raw_spin_lock_irqsave+0x32/0x40
[368033.032061] __wake_up_common_lock+0x63/0xc0
[368033.032073] ? bch_ptr_invalid+0x10/0x10 [bcache]
[368033.033502] bch_dirty_init_thread+0x14c/0x160 [bcache]
[368033.033511] ? read_dirty_submit+0x60/0x60 [bcache]
[368033.033516] kthread+0x112/0x130
[368033.033520] ? kthread_flush_work_fn+0x10/0x10
[368033.034505] ret_from_fork+0x35/0x40
```
The crash occurred when call wake_up(&state->wait), and then we want
to look at the value in the state. However, bch_sectors_dirty_init()
is not found in the stack of any task. Since state is allocated on
the stack, we guess that bch_sectors_dirty_init() has exited, causing
bch_dirty_init_thread() to be unable to handle kernel paging request.
In order to verify this idea, we added some printing information during
wake_up(&state->wait). We find that "wake up" is printed twice, however
we only expect the last thread to wake up once.
```dmesg
[ 994.641004] alcache: bch_dirty_init_thread() wake up
[ 994.641018] alcache: bch_dirty_init_thread() wake up
[ 994.641523] alcache: bch_sectors_dirty_init() init exit
```
There is a race. If bch_sectors_dirty_init() exits after the first wake
up, the second wake up will trigger this bug("unable to handle kernel
paging request").
Proceed as follows:
bch_sectors_dirty_init
kthread_run ==============> bch_dirty_init_thread(bch_dirtcnt[0])
... ...
atomic_inc(&state.started) ...
... ...
atomic_read(&state.enough) ...
... atomic_set(&state->enough, 1)
kthread_run ======================================================> bch_dirty_init_thread(bch_dirtcnt[1])
... atomic_dec_and_test(&state->started) ...
atomic_inc(&state.started) ... ...
... wake_up(&state->wait) ...
atomic_read(&state.enough) atomic_dec_and_test(&state->started)
... ...
wait_event(state.wait, atomic_read(&state.started) == 0) ...
return ...
wake_up(&state->wait)
We believe it is very common to wake up twice if there is no dirty, but
crash is an extremely low probability event. It's hard for us to reproduce
this issue. We attached and detached continuously for a week, with a total
of more than one million attaches and only one crash.
Putting atomic_inc(&state.started) before kthread_run() can avoid waking
up twice.
Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-8-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Song Liu [Fri, 17 Nov 2023 23:56:30 +0000 (15:56 -0800)]
md: fix bi_status reporting in md_end_clone_io
commit
45b478951b2ba5aea70b2850c49c1aa83aedd0d2 upstream.
md_end_clone_io() may overwrite error status in orig_bio->bi_status with
BLK_STS_OK. This could happen when orig_bio has BIO_CHAIN (split by
md_submit_bio => bio_split_to_limits, for example). As a result, upper
layer may miss error reported from md (or the device) and consider the
failed IO was successful.
Fix this by only update orig_bio->bi_status when current bio reports
error and orig_bio is BLK_STS_OK. This is the same behavior as
__bio_chain_endio().
Fixes: 10764815ff47 ("md: add io accounting for raid0 and raid5")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Bhanu Victor DiCara <00bvd0+linux@gmail.com>
Closes: https://lore.kernel.org/regressions/5727380.DvuYhMxLoT@bvd0/
Signed-off-by: Song Liu <song@kernel.org>
Tested-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coly Li [Mon, 20 Nov 2023 05:25:01 +0000 (13:25 +0800)]
bcache: replace a mistaken IS_ERR() by IS_ERR_OR_NULL() in btree_gc_coalesce()
commit
f72f4312d4388376fc8a1f6cf37cb21a0d41758b upstream.
Commit
028ddcac477b ("bcache: Remove unnecessary NULL point check in
node allocations") do the following change inside btree_gc_coalesce(),
31 @@ -1340,7 +1340,7 @@ static int btree_gc_coalesce(
32 memset(new_nodes, 0, sizeof(new_nodes));
33 closure_init_stack(&cl);
34
35 - while (nodes < GC_MERGE_NODES && !IS_ERR_OR_NULL(r[nodes].b))
36 + while (nodes < GC_MERGE_NODES && !IS_ERR(r[nodes].b))
37 keys += r[nodes++].keys;
38
39 blocks = btree_default_blocks(b->c) * 2 / 3;
At line 35 the original r[nodes].b is not always allocatored from
__bch_btree_node_alloc(), and possibly initialized as NULL pointer by
caller of btree_gc_coalesce(). Therefore the change at line 36 is not
correct.
This patch replaces the mistaken IS_ERR() by IS_ERR_OR_NULL() to avoid
potential issue.
Fixes: 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations")
Cc: <stable@vger.kernel.org> # 6.5+
Cc: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-9-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keith Busch [Mon, 20 Nov 2023 22:18:31 +0000 (14:18 -0800)]
io_uring: fix off-by one bvec index
commit
d6fef34ee4d102be448146f24caf96d7b4a05401 upstream.
If the offset equals the bv_len of the first registered bvec, then the
request does not include any of that first bvec. Skip it so that drivers
don't have to deal with a zero length bvec, which was observed to break
NVMe's PRP list creation.
Cc: stable@vger.kernel.org
Fixes: bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231120221831.2646460-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Wed, 22 Nov 2023 21:44:47 +0000 (22:44 +0100)]
tls: fix NULL deref on tls_sw_splice_eof() with empty record
commit
53f2cb491b500897a619ff6abd72f565933760f0 upstream.
syzkaller discovered that if tls_sw_splice_eof() is executed as part of
sendfile() when the plaintext/ciphertext sk_msg are empty, the send path
gets confused because the empty ciphertext buffer does not have enough
space for the encryption overhead. This causes tls_push_record() to go on
the `split = true` path (which is only supposed to be used when interacting
with an attached BPF program), and then get further confused and hit the
tls_merge_open_record() path, which then assumes that there must be at
least one populated buffer element, leading to a NULL deref.
It is possible to have empty plaintext/ciphertext buffers if we previously
bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path.
tls_sw_push_pending_record() already handles this case correctly; let's do
the same check in tls_sw_splice_eof().
Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush")
Cc: stable@vger.kernel.org
Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keith Busch [Mon, 6 Nov 2023 17:12:30 +0000 (18:12 +0100)]
swiotlb-xen: provide the "max_mapping_size" method
commit
bff2a2d453a1b683378b4508b86b84389f551a00 upstream.
There's a bug that when using the XEN hypervisor with bios with large
multi-page bio vectors on NVMe, the kernel deadlocks [1].
The deadlocks are caused by inability to map a large bio vector -
dma_map_sgtable always returns an error, this gets propagated to the block
layer as BLK_STS_RESOURCE and the block layer retries the request
indefinitely.
XEN uses the swiotlb framework to map discontiguous pages into contiguous
runs that are submitted to the PCIe device. The swiotlb framework has a
limitation on the length of a mapping - this needs to be announced with
the max_mapping_size method to make sure that the hardware drivers do not
create larger mappings.
Without max_mapping_size, the NVMe block driver would create large
mappings that overrun the maximum mapping size.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Link: https://lore.kernel.org/stable/ZTNH0qtmint%2FzLJZ@mail-itl/
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/151bef41-e817-aea9-675-a35fdac4ed@redhat.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 12 Nov 2023 20:36:26 +0000 (21:36 +0100)]
ACPI: PM: Add acpi_device_fix_up_power_children() function
commit
37ba91a82e3b9de35f64348c62b5ec7d74e3a41c upstream.
In some cases it is necessary to fix-up the power-state of an ACPI
device's children without touching the ACPI device itself add
a new acpi_device_fix_up_power_children() function for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Wed, 15 Nov 2023 18:02:22 +0000 (19:02 +0100)]
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA
commit
bd911485294a6f0596e4592ed442438015cffc8a upstream.
Like various other ASUS ExpertBook-s, the ASUS ExpertBook B1402CVA
has an ACPI DSDT table that describes IRQ 1 as ActiveLow while
the kernel overrides it to EdgeHigh.
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218114
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Woodhouse [Fri, 27 Oct 2023 18:36:51 +0000 (19:36 +0100)]
ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
commit
9bb69ba4c177dccaa1f5b5cbdf80b67813328348 upstream.
Xen HVM guests were observed taking triple-faults when attempting to
online a previously offlined vCPU.
Investigation showed that the fault was coming from a failing call
to lockdep_assert_irqs_disabled(), in load_current_idt() which was
too early in the CPU bringup to actually catch the exception and
report the failure cleanly.
This was a false positive, caused by acpi_idle_play_dead() setting
the per-cpu hardirqs_enabled flag by calling safe_halt(). Switch it
to use raw_safe_halt() instead, which doesn't do so.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 12 Nov 2023 20:36:27 +0000 (21:36 +0100)]
ACPI: video: Use acpi_device_fix_up_power_children()
commit
c93695494606326d7fd72b46a2a657139ccb0dec upstream.
Commit
89c290ea7589 ("ACPI: video: Put ACPI video and its child devices
into D0 on boot") introduced calling acpi_device_fix_up_power_extended()
on the video card for which the ACPI video bus is the companion device.
This unnecessarily touches the power-state of the GPU itself, while
the issue it tries to address only requires calling _PS0 on the child
devices.
Touching the power-state of the GPU itself is causing suspend / resume
issues on e.g. a Lenovo ThinkPad W530.
Instead use acpi_device_fix_up_power_children(), which only touches
the child devices, to fix this.
Fixes: 89c290ea7589 ("ACPI: video: Put ACPI video and its child devices into D0 on boot")
Reported-by: Owen T. Heisler <writer@owenh.net>
Closes: https://lore.kernel.org/regressions/9f36fb06-64c4-4264-aaeb-4e1289e764c4@owenh.net/
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/273
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218124
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Owen T. Heisler <writer@owenh.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gil Fine [Tue, 7 Nov 2023 10:22:40 +0000 (12:22 +0200)]
thunderbolt: Set lane bonding bit only for downstream port
commit
24d85bb3be373b5831699bddf698b392bd2b904d upstream.
Fix the lane bonding procedure to follow the steps described in USB4
Connection Manager guide. Hence, set the lane bonding bit only for
downstream port. This is needed for certain ASMedia device, otherwise
lane bonding fails and the device disconnects.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Zimmermann [Thu, 16 Nov 2023 13:02:12 +0000 (14:02 +0100)]
drm/ast: Disconnect BMC if physical connector is connected
commit
8d6ef26501b97243ee6c16b8187c5b38cb69b77d upstream.
Many user-space compositors fail with mode setting if a CRTC has
more than one connected connector. This is the case with the BMC
on Aspeed systems. Work around this problem by setting the BMC's
connector status to disconnected when the physical connector has
a display attached. This way compositors will only see one connected
connector at a time; either the physical one or the BMC.
Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: e329cb53b45d ("drm/ast: Add BMC virtual connector")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116130217.22931-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjorn Andersson [Mon, 30 Oct 2023 23:23:20 +0000 (16:23 -0700)]
drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog
commit
a33b2431d11b4df137bbcfdd5a5adfa054c2479e upstream.
During USB transfers on the SC8280XP __arm_smmu_tlb_sync() is seen to
typically take 1-2ms to complete. As expected this results in poor
performance, something that has been mitigated by proposing running the
iommu in non-strict mode (boot with iommu.strict=0).
This turns out to be related to the SAFE logic, and programming the QOS
SAFE values in the DPU (per suggestion from Rob and Doug) reduces the
TLB sync time to below 10us, which means significant less time spent
with interrupts disabled and a significant boost in throughput.
Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP")
Cc: stable@vger.kernel.org
Suggested-by: Doug Anderson <dianders@chromium.org>
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/565094/
Link: https://lore.kernel.org/r/20231030-sc8280xp-dpu-safe-lut-v1-1-6d485d7b428f@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Thu, 16 Nov 2023 12:52:29 +0000 (12:52 +0000)]
kselftest/arm64: Fix output formatting for za-fork
commit
460e462d22542adfafd8a5bc979437df73f1cbf3 upstream.
The za-fork test does not output a newline when reporting the result of
the one test it runs, causing the counts printed by kselftest to be
included in the test name. Add the newline.
Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h")
Cc: <stable@vger.kernel.org> # 6.4.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Sat, 18 Nov 2023 18:33:35 +0000 (19:33 +0100)]
prctl: Disable prctl(PR_SET_MDWE) on parisc
[ Upstream commit
793838138c157d4c49f4fb744b170747e3dabf58 ]
systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute
functionality, but fails on parisc which still needs executable stacks in
certain combinations of gcc/glibc/kernel.
Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until
userspace has catched up.
Signed-off-by: Helge Deller <deller@gmx.de>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sam James <sam@gentoo.org>
Closes: https://github.com/systemd/systemd/issues/29775
Tested-by: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florent Revest [Mon, 28 Aug 2023 15:08:57 +0000 (17:08 +0200)]
mm: add a NO_INHERIT flag to the PR_SET_MDWE prctl
[ Upstream commit
24e41bf8a6b424c76c5902fb999e9eca61bdf83d ]
This extends the current PR_SET_MDWE prctl arg with a bit to indicate that
the process doesn't want MDWE protection to propagate to children.
To implement this no-inherit mode, the tag in current->mm->flags must be
absent from MMF_INIT_MASK. This means that the encoding for "MDWE but
without inherit" is different in the prctl than in the mm flags. This
leads to a bit of bit-mangling in the prctl implementation.
Link: https://lkml.kernel.org/r/20230828150858.393570-6-revest@chromium.org
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ayush Jain <ayush.jain3@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of:
793838138c15 ("prctl: Disable prctl(PR_SET_MDWE) on parisc")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Tue, 21 Nov 2023 11:41:26 +0000 (12:41 +0100)]
lockdep: Fix block chain corruption
[ Upstream commit
bca4104b00fec60be330cd32818dd5c70db3d469 ]
Kent reported an occasional KASAN splat in lockdep. Mark then noted:
> I suspect the dodgy access is to chain_block_buckets[-1], which hits the last 4
> bytes of the redzone and gets (incorrectly/misleadingly) attributed to
> nr_large_chain_blocks.
That would mean @size == 0, at which point size_to_bucket() returns -1
and the above happens.
alloc_chain_hlocks() has 'size - req', for the first with the
precondition 'size >= rq', which allows the 0.
This code is trying to split a block, del_chain_block() takes what we
need, and add_chain_block() puts back the remainder, except in the
above case the remainder is 0 sized and things go sideways.
Fixes: 810507fe6fd5 ("locking/lockdep: Reuse freed chain_hlocks entries")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lkml.kernel.org/r/20231121114126.GH8262@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Fri, 17 Nov 2023 17:36:50 +0000 (18:36 +0100)]
USB: dwc3: qcom: fix ACPI platform device leak
[ Upstream commit
9cf87666fc6e08572341fe08ecd909935998fbbd ]
Make sure to free the "urs" platform device, which is created for some
ACPI platforms, on probe errors and on driver unbind.
Compile-tested only.
Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot")
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20231117173650.21161-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Fri, 17 Nov 2023 17:36:48 +0000 (18:36 +0100)]
USB: dwc3: qcom: fix resource leaks on probe deferral
[ Upstream commit
51392a1879ff06dc21b68aef4825f6ef68a7be42 ]
The driver needs to deregister and free the newly allocated dwc3 core
platform device on ACPI probe errors (e.g. probe deferral) and on driver
unbind but instead it leaked those resources while erroneously dropping
a reference to the parent platform device which is still in use.
For OF probing the driver takes a reference to the dwc3 core platform
device which has also always been leaked.
Fix the broken ACPI tear down and make sure to drop the dwc3 core
reference for both OF and ACPI.
Fixes: 8fd95da2cfb5 ("usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()")
Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI")
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Cc: stable@vger.kernel.org # 4.18
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231117173650.21161-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
9cf87666fc6e ("USB: dwc3: qcom: fix ACPI platform device leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Fri, 17 Nov 2023 13:13:36 +0000 (08:13 -0500)]
nvmet: nul-terminate the NQNs passed in the connect command
[ Upstream commit
1c22e0295a5eb571c27b53c7371f95699ef705ff ]
The host and subsystem NQNs are passed in the connect command payload and
interpreted as nul-terminated strings. Ensure they actually are
nul-terminated before using them.
Fixes: a07b4970f464 "nvmet: add a generic NVMe target")
Reported-by: Alon Zahavi <zahavi.alon@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hannes Reinecke [Thu, 16 Nov 2023 12:14:35 +0000 (13:14 +0100)]
nvme: blank out authentication fabrics options if not configured
[ Upstream commit
c7ca9757bda35ff9ce27ab42f2cb8b84d983e6ad ]
If the config option NVME_HOST_AUTH is not selected we should not
accept the corresponding fabrics options. This allows userspace
to detect if NVMe authentication has been enabled for the kernel.
Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: f50fff73d620 ("nvme: implement In-Band authentication")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Wed, 1 Nov 2023 22:03:28 +0000 (22:03 +0000)]
afs: Fix file locking on R/O volumes to operate in local mode
[ Upstream commit
b590eb41be766c5a63acc7e8896a042f7a4e8293 ]
AFS doesn't really do locking on R/O volumes as fileservers don't maintain
state with each other and thus a lock on a R/O volume file on one
fileserver will not be be visible to someone looking at the same file on
another fileserver.
Further, the server may return an error if you try it.
Fix this by doing what other AFS clients do and handle filelocking on R/O
volume files entirely within the client and don't touch the server.
Fixes: 6c6c1d63c243 ("afs: Provide mount-time configurable byte-range file locking emulation")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 26 Oct 2023 00:25:07 +0000 (01:25 +0100)]
afs: Return ENOENT if no cell DNS record can be found
[ Upstream commit
0167236e7d66c5e1e85d902a6abc2529b7544539 ]
Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or
cellservdb config file record) can be found rather than returning
EDESTADDRREQ.
Also add cell name lookup info to the cursor dump.
Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Elder [Wed, 22 Nov 2023 23:17:08 +0000 (17:17 -0600)]
net: ipa: fix one GSI register field width
[ Upstream commit
37f0205538baf70beb57cdcb6c7d14aa13257926 ]
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register
is 24 bits (not 20 bits) starting with IPA v5.0. Fix this.
Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Samuel Holland [Wed, 22 Nov 2023 00:42:17 +0000 (16:42 -0800)]
net: axienet: Fix check for partial TX checksum
[ Upstream commit
fd0413bbf8b11f56e8aa842783b0deda0dfe2926 ]
Due to a typo, the code checked the RX checksum feature in the TX path.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arseniy Krasnov [Tue, 21 Nov 2023 21:16:42 +0000 (00:16 +0300)]
vsock/test: fix SEQPACKET message bounds test
[ Upstream commit
f0863888f6cfef33e3117dccfe94fa78edf76be4 ]
Tune message length calculation to make this test work on machines
where 'getpagesize()' returns >32KB. Now maximum message length is not
hardcoded (on machines above it was smaller than 'getpagesize()' return
value, thus we get negative value and test fails), but calculated at
runtime and always bigger than 'getpagesize()' result. Reproduced on
aarch64 with 64KB page size.
Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ivan Vecera [Tue, 21 Nov 2023 21:13:36 +0000 (13:13 -0800)]
i40e: Fix adding unsupported cloud filters
[ Upstream commit
4e20655e503e3a478cd1682bf25e3202dd823da8 ]
If a VF tries to add unsupported cloud filter through virtchnl
then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but
this error code is stored in 'ret' instead of 'aq_ret' that
is used as error code sent back to VF. In this scenario where
one of the mentioned functions fails the value of 'aq_ret'
is zero so the VF will incorrectly receive a 'success'.
Use 'aq_ret' to store return value and remove 'ret' local
variable. Additionally fix the issue when filter allocation
fails, in this case no notification is sent back to the VF.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raju Rangoju [Tue, 21 Nov 2023 19:14:35 +0000 (00:44 +0530)]
amd-xgbe: propagate the correct speed and duplex status
[ Upstream commit
7a2323ac24a50311f64a3a9b54ed5bef5821ecae ]
xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.
Address this by propagating correct information.
Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raju Rangoju [Tue, 21 Nov 2023 19:14:34 +0000 (00:44 +0530)]
amd-xgbe: handle the corner-case during tx completion
[ Upstream commit
7121205d5330c6a3cb3379348886d47c77b78d06 ]
The existing implementation uses software logic to accumulate tx
completions until the specified time (1ms) is met and then poll them.
However, there exists a tiny gap which leads to a race between
resetting and checking the tx_activate flag. Due to this the tx
completions are not reported to upper layer and tx queue timeout
kicks-in restarting the device.
To address this, introduce a tx cleanup mechanism as part of the
periodic maintenance process.
Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raju Rangoju [Tue, 21 Nov 2023 19:14:33 +0000 (00:44 +0530)]
amd-xgbe: handle corner-case during sfp hotplug
[ Upstream commit
676ec53844cbdf2f47e68a076cdff7f0ec6cbe3f ]
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY
configurations needs PLL to be enabled while doing mode set. When the
SFP module isn't connected during boot, driver assumes AN is ON and
attempts auto-negotiation. However, if the connected SFP comes up in
Fixed PHY configuration the link will not come up as PLL isn't enabled
while the initial mode set command is issued. So, force the mode change
for SFI in Fixed PHY configuration to fix link issues.
Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Tue, 21 Nov 2023 19:08:44 +0000 (20:08 +0100)]
net: veth: fix ethtool stats reporting
[ Upstream commit
818ad9cc90d4a7165caaee7e32800c50d0564ec3 ]
Fix a possible misalignment between page_pool stats and tx xdp_stats
reported in veth_get_ethtool_stats routine.
The issue can be reproduced configuring the veth pair with the
following tx/rx queues:
$ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \
numtxqueues 1 numrxqueues 1
and loading a simple XDP program on v0 that just returns XDP_PASS.
In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1.
Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN
since we always report xdp_stats for all tx queues in ethtool.
Fixes: 4fc418053ec7 ("net: veth: add page_pool stats")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suman Ghosh [Tue, 21 Nov 2023 16:56:24 +0000 (22:26 +0530)]
octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
[ Upstream commit
4aa1d8f89b10cdc25a231dabf808d8935e0b137a ]
It is possible to add a ntuple rule which would like to direct packet to
a VF whose number of queues are greater/less than its PF's queue numbers.
For example a PF can have 2 Rx queues but a VF created on that PF can have
8 Rx queues. As of today, ntuple rule will reject rule because it is
checking the requested queue number against PF's number of Rx queues.
As a part of this fix if the action of a ntuple rule is to move a packet
to a VF's queue then the check is removed. Also, a debug information is
printed to aware user that it is user's responsibility to cross check if
the requested queue number on that VF is a valid one.
Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefano Stabellini [Wed, 22 Nov 2023 23:07:41 +0000 (15:07 -0800)]
arm/xen: fix xen_vcpu_info allocation alignment
[ Upstream commit
7bf9a6b46549852a37e6d07e52c601c3c706b562 ]
xen_vcpu_info is a percpu area than needs to be mapped by Xen.
Currently, it could cross a page boundary resulting in Xen being unable
to map it:
[ 0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164!
[ 0.574002] Internal error: Oops - BUG:
00000000f2000800 [#1] PREEMPT SMP
Fix the issue by using __alloc_percpu and requesting alignment for the
memory allocation.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop
Fixes: 24d5373dda7c ("arm/xen: Use alloc_percpu rather than __alloc_percpu")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Will Deacon [Fri, 17 Nov 2023 13:14:22 +0000 (13:14 +0000)]
arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
[ Upstream commit
acfa60dbe03802d6afd28401aa47801270e82021 ]
When CONFIG_RODATA_FULL_DEFAULT_ENABLED=y, passing "rodata=on" on the
kernel command-line (rather than "rodata=full") should turn off the
"full" behaviour, leaving writable linear aliases of read-only kernel
memory. Unfortunately, the option has no effect in this situation and
the only way to disable the "rodata=full" behaviour is to disable rodata
protection entirely by passing "rodata=off".
Fix this by parsing the "on" and "off" options in the arch code,
additionally enforcing that 'rodata_full' cannot be set without also
setting 'rodata_enabled', allowing us to simplify a couple of checks
in the process.
Fixes: 2e8cff0a0eee ("arm64: fix rodata=full")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231117131422.29663-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mikhail Zaslonko [Wed, 8 Nov 2023 17:18:52 +0000 (18:18 +0100)]
s390/ipl: add missing IPL_TYPE_ECKD_DUMP case to ipl_init()
[ Upstream commit
673752a839694133a328610fcbc54f3d59ae87f3 ]
Add missing IPL_TYPE_ECKD_DUMP case to ipl_init() creating
ECKD ipl device attribute group similar to IPL_TYPE_ECKD case.
Commit
e2d2a2968f2a ("s390/ipl: add eckd dump support") should
have had it from the beginning.
Fixes: e2d2a2968f2a ("s390/ipl: add eckd dump support")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
D. Wythe [Wed, 22 Nov 2023 02:37:05 +0000 (10:37 +0800)]
net/smc: avoid data corruption caused by decline
[ Upstream commit
e6d71b437abc2f249e3b6a1ae1a7228e09c6e563 ]
We found a data corruption issue during testing of SMC-R on Redis
applications.
The benchmark has a low probability of reporting a strange error as
shown below.
"Error: Protocol error, got "\xe2" as reply type byte"
Finally, we found that the retrieved error data was as follows:
0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C
0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2
It is quite obvious that this is a SMC DECLINE message, which means that
the applications received SMC protocol message.
We found that this was caused by the following situations:
client server
¦ clc proposal
------------->
¦ clc accept
<-------------
¦ clc confirm
------------->
wait llc confirm
send llc confirm
¦failed llc confirm
¦ x------
(after 2s)timeout
wait llc confirm rsp
wait decline
(after 1s) timeout
(after 2s) timeout
¦ decline
-------------->
¦ decline
<--------------
As a result, a decline message was sent in the implementation, and this
message was read from TCP by the already-fallback connection.
This patch double the client timeout as 2x of the server value,
With this simple change, the Decline messages should never cross or
collide (during Confirm link timeout).
This issue requires an immediate solution, since the protocol updates
involve a more long-term solution.
Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Ignacio Tornos Martinez [Mon, 20 Nov 2023 12:06:29 +0000 (13:06 +0100)]
net: usb: ax88179_178a: fix failed operations during ax88179_reset
[ Upstream commit
0739af07d1d947af27c877f797cb82ceee702515 ]
Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device,
the following test cycle has been implemented:
- power on
- check logs
- shutdown
- after detecting the system shutdown, disconnect power
- after approximately 60 seconds of sleep, power is restored
Running some cycles, sometimes error logs like this appear:
kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19
kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19
...
These failed operation are happening during ax88179_reset execution, so
the initialization could not be correct.
In order to avoid this, we need to increase the delay after reset and
clock initial operations. By using these larger values, many cycles
have been run and no failed operations appear.
It would be better to check some status register to verify when the
operation has finished, but I do not have found any available information
(neither in the public datasheets nor in the manufacturer's driver). The
only available information for the necessary delays is the maufacturer's
driver (original values) but the proposed values are not enough for the
tested devices.
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Reported-by: Herb Wei <weihao.bj@ieisystem.com>
Tested-by: Herb Wei <weihao.bj@ieisystem.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cong Yang [Mon, 20 Nov 2023 02:01:09 +0000 (10:01 +0800)]
drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP
[ Upstream commit
cea7008190ad65b4aaae6e94667a358d2c10a696 ]
The refresh reported by modetest is 60.46Hz, and the actual measurement
is 60.01Hz, which is outside the expected tolerance. Adjust hporch and
pixel clock to fix it. After repair, modetest and actual measurement were
all 60.01Hz.
Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate
is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte
by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime
/DSI CLK. Assume that the DSI controller could not make the mode that we
requested(presumably it's PLL couldn't generate the exact pixel clock?).
If you use a different DSI controller, you may need to readjust these
parameters. Now this panel looks like it's only used by me on the MTK
platform, so let's change this set of parameters.
Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kunwu Chan [Sun, 19 Nov 2023 14:17:59 +0000 (22:17 +0800)]
ipv4: Correct/silence an endian warning in __ip_do_redirect
[ Upstream commit
c0e2926266af3b5acf28df0a8fc6e4d90effe0bb ]
net/ipv4/route.c:783:46: warning: incorrect type in argument 2 (different base types)
net/ipv4/route.c:783:46: expected unsigned int [usertype] key
net/ipv4/route.c:783:46: got restricted __be32 [usertype] new_gw
Fixes: 969447f226b4 ("ipv4: use new_gw for redirect neigh lookup")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20231119141759.420477-1-chentao@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Yi [Tue, 31 Oct 2023 04:32:39 +0000 (12:32 +0800)]
HID: fix HID device resource race between HID core and debugging support
[ Upstream commit
fc43e9c857b7aa55efba9398419b14d9e35dcc7d ]
hid_debug_events_release releases resources bound to the HID device instance.
hid_device_release releases the underlying HID device instance potentially
before hid_debug_events_release has completed releasing debug resources bound
to the same HID device instance.
Reference count to prevent the HID device instance from being torn down
preemptively when HID debugging support is used. When count reaches zero,
release core resources of HID device instance using hiddev_free.
The crash:
[ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53!
[ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168
[ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 #257
[ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT)
[ 120.761643][ T4396] pstate:
60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac
[ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac
[ 120.779120][ T4396] sp :
ffffffc01e62bb60
[ 120.783126][ T4396] x29:
ffffffc01e62bb60 x28:
ffffff818ce3a200
[ 120.789126][ T4396] x27:
0000000000000009 x26:
0000000000980000
[ 120.795126][ T4396] x25:
ffffffc012431000 x24:
ffffff802c6d4e00
[ 120.801125][ T4396] x23:
ffffff8005c66f00 x22:
ffffffc01183b5b8
[ 120.807125][ T4396] x21:
ffffff819df2f100 x20:
0000000000000000
[ 120.813124][ T4396] x19:
ffffff802c3f0700 x18:
ffffffc01d2cd058
[ 120.819124][ T4396] x17:
0000000000000000 x16:
0000000000000000
[ 120.825124][ T4396] x15:
0000000000000004 x14:
0000000000003fff
[ 120.831123][ T4396] x13:
ffffffc012085588 x12:
0000000000000003
[ 120.837123][ T4396] x11:
00000000ffffbfff x10:
0000000000000003
[ 120.843123][ T4396] x9 :
455103d46b329300 x8 :
455103d46b329300
[ 120.849124][ T4396] x7 :
74707572726f6320 x6 :
ffffffc0124b8cb5
[ 120.855124][ T4396] x5 :
ffffffffffffffff x4 :
0000000000000000
[ 120.861123][ T4396] x3 :
ffffffc011cf4f90 x2 :
ffffff81fee7b948
[ 120.867122][ T4396] x1 :
ffffffc011cf4f90 x0 :
0000000000000054
[ 120.873122][ T4396] Call trace:
[ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac
[ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c
[ 120.886617][ T4396] full_proxy_release+0x50/0xbc
[ 120.891323][ T4396] __fput+0xdc/0x238
[ 120.895075][ T4396] ____fput+0x14/0x24
[ 120.898911][ T4396] task_work_run+0x90/0x148
[ 120.903268][ T4396] do_exit+0x1bc/0x8a4
[ 120.907193][ T4396] do_group_exit+0x8c/0xa4
[ 120.911458][ T4396] get_signal+0x468/0x744
[ 120.915643][ T4396] do_signal+0x84/0x280
[ 120.919650][ T4396] do_notify_resume+0xd0/0x218
[ 120.924262][ T4396] work_pending+0xc/0x3f0
[ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ]
Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping")
Signed-off-by: Charles Yi <be286@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacek Lawrynowicz [Wed, 15 Nov 2023 11:10:04 +0000 (12:10 +0100)]
accel/ivpu/37xx: Fix hangs related to MMIO reset
[ Upstream commit
3f7c0634926daf48cd2f6db6c1197a1047074088 ]
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET
register. IP will be reset by FLR or by entering d0i3. Also IP reset
during power_up is not needed as the VPU is already in reset.
Removing MMIO reset improves stability as it a partial device reset
that is not safe in some corner cases.
This change also brings back ivpu_boot_pwr_domain_disable() that
helps to properly power down VPU when it is hung by a buggy workload.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanislaw Gruszka [Fri, 20 Oct 2023 10:45:00 +0000 (12:45 +0200)]
accel/ivpu: Do not initialize parameters on power up
[ Upstream commit
f956bf2080862cfc97412e1eaa08689bc9838d20 ]
Initialize HW specific parameters only once. We do not have to do this
on every power_up (performed during initialization and on resume). Move
corresponding code to ->info_init()
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-6-stanislaw.gruszka@linux.intel.com
Stable-dep-of:
3f7c0634926d ("accel/ivpu/37xx: Fix hangs related to MMIO reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peilin Ye [Tue, 14 Nov 2023 00:42:17 +0000 (01:42 +0100)]
bpf: Fix dev's rx stats for bpf_redirect_peer traffic
[ Upstream commit
024ee930cb3c9ae49e4266aee89cfde0ebb407e1 ]
Traffic redirected by bpf_redirect_peer() (used by recent CNIs like Cilium)
is not accounted for in the RX stats of supported devices (that is, veth
and netkit), confusing user space metrics collectors such as cAdvisor [0],
as reported by Youlun.
Fix it by calling dev_sw_netstats_rx_add() in skb_do_redirect(), to update
RX traffic counters. Devices that support ndo_get_peer_dev _must_ use the
@tstats per-CPU counters (instead of @lstats, or @dstats).
To make this more fool-proof, error out when ndo_get_peer_dev is set but
@tstats are not selected.
[0] Specifically, the "container_network_receive_{byte,packet}s_total"
counters are affected.
Fixes: 9aa1206e8f48 ("bpf: Add redirect_peer helper")
Reported-by: Youlun Zhang <zhangyoulun@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-6-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Borkmann [Tue, 14 Nov 2023 00:42:14 +0000 (01:42 +0100)]
net: Move {l,t,d}stats allocation to core and convert veth & vrf
[ Upstream commit
34d21de99cea9cb17967874313e5b0262527833c ]
Move {l,t,d}stats allocation to the core and let netdevs pick the stats
type they need. That way the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc) - all happening in the core.
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-3-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of:
024ee930cb3c ("bpf: Fix dev's rx stats for bpf_redirect_peer traffic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Borkmann [Tue, 14 Nov 2023 00:42:13 +0000 (01:42 +0100)]
net, vrf: Move dstats structure to core
[ Upstream commit
79e0c5be8c73a674c92bd4ba77b75f4f8c91d32e ]
Just move struct pcpu_dstats out of the vrf into the core, and streamline
the field names slightly, so they better align with the {t,l}stats ones.
No functional change otherwise. A conversion of the u64s to u64_stats_t
could be done at a separate point in future. This move is needed as we are
moving the {t,l,d}stats allocation/freeing to the core.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of:
024ee930cb3c ("bpf: Fix dev's rx stats for bpf_redirect_peer traffic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Woodhouse [Wed, 15 Nov 2023 16:47:51 +0000 (11:47 -0500)]
PM: tools: Fix sleepgraph syntax error
[ Upstream commit
b85e2dab33ce467e8dcf1cb6c0c587132ff17f56 ]
The sleepgraph tool currently fails:
File "/usr/bin/sleepgraph", line 4155
or re.match('psci: CPU(?P<cpu>[0-9]*) killed.*', msg)):
^
SyntaxError: unmatched ')'
Fixes: 34ea427e01ea ("PM: tools: sleepgraph: Recognize "CPU killed" messages")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonas Karlman [Thu, 26 Oct 2023 19:14:58 +0000 (19:14 +0000)]
drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full
[ Upstream commit
bb0a05acd6121ff0e810b44fdc24dbdfaa46b642 ]
Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328
and RK3399 result in wrong colors being displayed.
The issue can be observed using modetest:
modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24
modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24
Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP
full framework (IP version 3.x) compared to VOP little framework (2.x).
Fix colors by applying different rb swap for VOP full framework (3.x)
and VOP little framework (2.x) similar to vendor 4.4 kernel.
Fixes: 85a359f25388 ("drm/rockchip: Add BGR formats to VOP")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuck Lever [Sun, 19 Nov 2023 23:56:17 +0000 (18:56 -0500)]
libfs: getdents() should return 0 after reaching EOD
[ Upstream commit
796432efab1e372d404e7a71cc6891a53f105051 ]
The new directory offset helpers don't conform with the convention
of getdents() returning no more entries once a directory file
descriptor has reached the current end-of-directory.
To address this, copy the logic from dcache_readdir() to mark the
open directory file descriptor once EOD has been reached. Seeking
resets the mark.
Reported-by: Tavian Barnes <tavianator@tavianator.com>
Closes: https://lore.kernel.org/linux-fsdevel/20231113180616.2831430-1-tavianator@tavianator.com/
Fixes: 6faddda69f62 ("libfs: Add directory operations for stable offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170043792492.4628.15646203084646716134.stgit@bazille.1015granger.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Wed, 25 Oct 2023 14:10:18 +0000 (16:10 +0200)]
block: update the stable_writes flag in bdev_add
[ Upstream commit
1898efcdbed32bb1c67269c985a50bab0dbc9493 ]
Propagate the per-queue stable_write flags into each bdev inode in bdev_add.
This makes sure devices that require stable writes have it set for I/O
on the block device node as well.
Note that this doesn't cover the case of a flag changing on a live device
yet. We should handle that as well, but I plan to cover it as part of a
more general rework of how changing runtime paramters on block devices
works.
Fixes: 1cb039f3dc16 ("bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag")
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-3-hch@lst.de
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Wed, 25 Oct 2023 14:10:17 +0000 (16:10 +0200)]
filemap: add a per-mapping stable writes flag
[ Upstream commit
762321dab9a72760bf9aec48362f932717c9424d ]
folio_wait_stable waits for writeback to finish before modifying the
contents of a folio again, e.g. to support check summing of the data
in the block integrity code.
Currently this behavior is controlled by the SB_I_STABLE_WRITES flag
on the super_block, which means it is uniform for the entire file system.
This is wrong for the block device pseudofs which is shared by all
block devices, or file systems that can use multiple devices like XFS
witht the RT subvolume or btrfs (although btrfs currently reimplements
folio_wait_stable anyway).
Add a per-address_space AS_STABLE_WRITES flag to control the behavior
in a more fine grained way. The existing SB_I_STABLE_WRITES is kept
to initialize AS_STABLE_WRITES to the existing default which covers
most cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-2-hch@lst.de
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of:
1898efcdbed3 ("block: update the stable_writes flag in bdev_add")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrzej Hajda [Wed, 15 Nov 2023 10:54:03 +0000 (11:54 +0100)]
drm/i915: do not clean GT table on error path
[ Upstream commit
0561794b6b642b84b879bf97061c4b4fa692839e ]
The only task of intel_gt_release_all is to zero gt table. Calling
it on error path prevents intel_gt_driver_late_release_all (called from
i915_driver_late_release) to cleanup GTs, causing leakage.
After i915_driver_late_release GT array is not used anymore so
it does not need cleaning at all.
Sample leak report:
BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown()
...
Object 0xffff888113420040 @offset=64
Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454
kmem_cache_alloc+0x25b/0x270
__i915_request_create+0x75/0x610 [i915]
i915_request_create+0x109/0x290 [i915]
__engines_record_defaults+0xca/0x440 [i915]
intel_gt_init+0x275/0x430 [i915]
i915_gem_init+0x135/0x2c0 [i915]
i915_driver_probe+0x8d1/0xdc0 [i915]
v2: removed whole intel_gt_release_all
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489
Fixes: bec68cc9ea42 ("drm/i915: Prepare for multiple GTs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-dont_clean_gt_on_error_path-v2-1-54250125470a@intel.com
(cherry picked from commit
e899505533852bf1da133f2f4c9a9655ff77f7e5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen Ni [Tue, 31 Oct 2023 04:00:07 +0000 (04:00 +0000)]
ata: pata_isapnp: Add missing error check for devm_ioport_map()
[ Upstream commit
a6925165ea82b7765269ddd8dcad57c731aa00de ]
Add missing error return check for devm_ioport_map() and return the
error if this function call fails.
Fixes: 0d5ff566779f ("libata: convert to iomap")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suman Ghosh [Fri, 17 Nov 2023 10:40:18 +0000 (16:10 +0530)]
octeontx2-pf: Fix memory leak during interface down
[ Upstream commit
5f228d7c8a539714c1e9b7e7534f76bb7979f268 ]
During 'ifconfig <netdev> down' one RSS memory was not getting freed.
This patch fixes the same.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Fri, 17 Nov 2023 14:17:33 +0000 (14:17 +0000)]
wireguard: use DEV_STATS_INC()
[ Upstream commit
93da8d75a66568ba4bb5b14ad2833acd7304cd02 ]
wg_xmit() can be called concurrently, KCSAN reported [1]
some device stats updates can be lost.
Use DEV_STATS_INC() for this unlikely case.
[1]
BUG: KCSAN: data-race in wg_xmit / wg_xmit
read-write to 0xffff888104239160 of 8 bytes by task 1375 on cpu 0:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...
read-write to 0xffff888104239160 of 8 bytes by task 1378 on cpu 1:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...
v2: also change wg_packet_consume_data_done() (Hangbin Liu)
and wg_packet_purge_staged_packets()
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiawen Wu [Fri, 17 Nov 2023 10:11:08 +0000 (18:11 +0800)]
net: wangxun: fix kernel panic due to null pointer
[ Upstream commit
8ba2c459668cfe2aaacc5ebcd35b4b9ef8643013 ]
When the device uses a custom subsystem vendor ID, the function
wx_sw_init() returns before the memory of 'wx->mac_table' is allocated.
The null pointer will causes the kernel panic.
Fixes: 79625f45ca73 ("net: wangxun: Move MAC address handling to libwx")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Sun, 8 Oct 2023 22:32:56 +0000 (00:32 +0200)]
drm/panel: simple: Fix Innolux G101ICE-L01 timings
[ Upstream commit
3f9a91b6c00e655d27bd785dcda1742dbdc31bda ]
The Innolux G101ICE-L01 datasheet [1] page 17 table
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
indicates that maximum vertical blanking time is 40 lines.
Currently the driver uses 29 lines.
Fix it, and since this panel is a DE panel, adjust the timings
to make them less hostile to controllers which cannot do 1 px
HSA/VSA, distribute the delays evenly between all three parts.
[1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-
12042389.pdf
Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Sun, 8 Oct 2023 22:33:15 +0000 (00:33 +0200)]
drm/panel: simple: Fix Innolux G101ICE-L01 bus flags
[ Upstream commit
06fc41b09cfbc02977acd9189473593a37d82d9b ]
Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description,
ones which match both the datasheet and the panel display_timing flags .
Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Berger [Mon, 2 Oct 2023 12:57:33 +0000 (08:57 -0400)]
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
[ Upstream commit
8a924db2d7b5eb69ba08b1a0af46e9f1359a9bdf ]
When vfs_getattr_nosec() calls a filesystem's getattr interface function
then the 'nosec' should propagate into this function so that
vfs_getattr_nosec() can again be called from the filesystem's gettattr
rather than vfs_getattr(). The latter would add unnecessary security
checks that the initial vfs_getattr_nosec() call wanted to avoid.
Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass
with the new getattr_flags parameter to the getattr interface function.
In overlayfs and ecryptfs use this flag to determine which one of the
two functions to call.
In a recent code change introduced to IMA vfs_getattr_nosec() ended up
calling vfs_getattr() in overlayfs, which in turn called
security_inode_getattr() on an exiting process that did not have
current->fs set anymore, which then caused a kernel NULL pointer
dereference. With this change the call to security_inode_getattr() can
be avoided, thus avoiding the NULL pointer dereference.
Reported-by: <syzbot+a67fc5321ffb4b311c98@syzkaller.appspotmail.com>
Fixes: db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version")
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Christian Brauner <brauner@kernel.org>
Co-developed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/r/20231002125733.1251467-1-stefanb@linux.vnet.ibm.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xuxin Xiong [Tue, 14 Nov 2023 04:42:05 +0000 (12:42 +0800)]
drm/panel: auo,b101uan08.3: Fine tune the panel power sequence
[ Upstream commit
6965809e526917b73c8f9178173184dcf13cec4b ]
For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that
MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high.
Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel")
Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Fri, 17 Nov 2023 02:35:23 +0000 (10:35 +0800)]
blk-cgroup: avoid to warn !rcu_read_lock_held() in blkg_lookup()
[ Upstream commit
35a99d6557cacbc177314735342f77a2dda41872 ]
So far, all callers either holds spin lock or rcu read explicitly, and
most of the caller has added WARN_ON_ONCE(!rcu_read_lock_held()) or
lockdep_assert_held(&disk->queue->queue_lock).
Remove WARN_ON_ONCE(!rcu_read_lock_held()) from blkg_lookup() for
killing the false positive warning from blkg_conf_prep().
Reported-by: Changhui Zhong <czhong@redhat.com>
Fixes: 83462a6c971c ("blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 8 Jun 2023 08:43:54 +0000 (09:43 +0100)]
afs: Make error on cell lookup failure consistent with OpenAFS
[ Upstream commit
2a4ca1b4b77850544408595e2433f5d7811a9daa ]
When kafs tries to look up a cell in the DNS or the local config, it will
translate a lookup failure into EDESTADDRREQ whereas OpenAFS translates it
into ENOENT. Applications such as West expect the latter behaviour and
fail if they see the former.
This can be seen by trying to mount an unknown cell:
# mount -t afs %example.com:cell.root /mnt
mount: /mnt: mount(2) system call failed: Destination address required.
Fixes: 4d673da14533 ("afs: Support the AFS dynamic root")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 2 Nov 2023 16:26:59 +0000 (16:26 +0000)]
afs: Fix afs_server_list to be cleaned up with RCU
[ Upstream commit
e6bace7313d61e31f2b16fa3d774fd8cb3cb869e ]
afs_server_list is accessed with the rcu_read_lock() held from
volume->servers, so it needs to be cleaned up correctly.
Fix this by using kfree_rcu() instead of kfree().
Fixes: 8a070a964877 ("afs: Detect cell aliases 1 - Cells with root volumes")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 16 Nov 2023 13:12:59 +0000 (13:12 +0000)]
rxrpc: Defer the response to a PING ACK until we've parsed it
[ Upstream commit
1a01319feef7047aa2ba400ffa3e047776aa29ca ]
Defer the generation of a PING RESPONSE ACK in response to a PING ACK until
we've parsed the PING ACK so that we pick up any changes to the packet
queue so that we can update ackinfo.
This is also applied to an ACK generated in response to an ACK with the
REQUEST_ACK flag set.
Note that whilst the problem was added in commit
248f219cb8bc, it didn't
really matter at that point because the ACK was proposed in softirq mode
and generated asynchronously later in process context, taking the latest
values at the time. But this fix is only needed since the move to parse
incoming packets in an I/O thread rather than in softirq and generate the
ACK at point of proposal (
b0346843b1076b34a0278ff601f8f287535cb064).
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 16 Nov 2023 13:12:58 +0000 (13:12 +0000)]
rxrpc: Fix RTT determination to use any ACK as a source
[ Upstream commit
3798680f2fbbe0ca3ab6138b34e0d161c36497ee ]
Fix RTT determination to be able to use any type of ACK as the response
from which RTT can be calculated provided its ack.serial is non-zero and
matches the serial number of an outgoing DATA or ACK packet. This
shouldn't be limited to REQUESTED-type ACKs as these can have other types
substituted for them for things like duplicate or out-of-order packets.
Fixes: 4700c4d80b7b ("rxrpc: Fix loss of RTT samples due to interposed ACK")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gerd Bayer [Wed, 15 Nov 2023 15:59:58 +0000 (16:59 +0100)]
s390/ism: ism driver implies smc protocol
[ Upstream commit
d565fa4300d9ebd5ba3bbd259ce841f8dab609d6 ]
Since commit
a72178cfe855 ("net/smc: Fix dependency of SMC on ISM")
you can build the ism code without selecting the SMC network protocol.
That leaves some ism functions be reported as unused. Move these
functions under the conditional compile with CONFIG_SMC.
Also codify the suggestion to also configure the SMC protocol in ism's
Kconfig - but with an "imply" rather than a "select" as SMC depends on
other config options and allow for a deliberate decision not to build
SMC. Also, mention that in ISM's help.
Fixes: a72178cfe855 ("net/smc: Fix dependency of SMC on ISM")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netdev/afd142a2-1fa0-46b9-8b2d-7652d41d3ab8@infradead.org/
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Marek [Fri, 10 Nov 2023 00:02:14 +0000 (19:02 -0500)]
drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy
[ Upstream commit
b3e0f94d15700ac8e8c1c2355834f5d5c753c41d ]
Use the same value as the downstream driver. This change is needed for CPHY
mode to work correctly.
Fixes: 8b034e677111 ("drm/msm/dsi: add support for DSI-PHY on SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/566987/
Link: https://lore.kernel.org/r/20231110000216.29979-1-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keisuke Nishimura [Tue, 31 Oct 2023 13:38:22 +0000 (14:38 +0100)]
sched/fair: Fix the decision for load balance
[ Upstream commit
6d7e4782bcf549221b4ccfffec2cf4d1a473f1a3 ]
should_we_balance is called for the decision to do load-balancing.
When sched ticks invoke this function, only one CPU should return
true. However, in the current code, two CPUs can return true. The
following situation, where b means busy and i means idle, is an
example, because CPU 0 and CPU 2 return true.
[0, 1] [2, 3]
b b i b
This fix checks if there exists an idle CPU with busy sibling(s)
after looking for a CPU on an idle core. If some idle CPUs with busy
siblings are found, just the first one should do load-balancing.
Fixes: b1bfeab9b002 ("sched/fair: Consider the idle state of the whole core for load balance")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20231031133821.1570861-1-keisuke.nishimura@inria.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Abel Wu [Tue, 7 Nov 2023 09:05:07 +0000 (17:05 +0800)]
sched/eevdf: Fix vruntime adjustment on reweight
[ Upstream commit
eab03c23c2a162085b13200d7942fc5a00b5ccc8 ]
vruntime of the (on_rq && !0-lag) entity needs to be adjusted when
it gets re-weighted, and the calculations can be simplified based
on the fact that re-weight won't change the w-average of all the
entities. Please check the proofs in comments.
But adjusting vruntime can also cause position change in RB-tree
hence require re-queue to fix up which might be costly. This might
be avoided by deferring adjustment to the time the entity actually
leaves tree (dequeue/pick), but that will negatively affect task
selection and probably not good enough either.
Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231107090510.71322-2-wuyun.abel@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ani Sinha [Mon, 16 Oct 2023 13:31:22 +0000 (19:01 +0530)]
hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles
[ Upstream commit
c3803203bc5ec910a3eb06172cf6fb368e0e4390 ]
Some small fixes:
- lets make sure we are not adding ipv4 addresses in ipv6 section in
keyfile and vice versa.
- ADDR_FAMILY_IPV6 is a bit in addr_family. Test that bit instead of
checking the whole value of addr_family.
- Some trivial fixes in hv_set_ifconfig.sh.
These fixes are proposed after doing some internal testing at Red Hat.
CC: Shradha Gupta <shradhagupta@linux.microsoft.com>
CC: Saurabh Sengar <ssengar@linux.microsoft.com>
Fixes: 42999c904612 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Shradha Gupta <Shradhagupta@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <
20231016133122.
2419537-1-anisinha@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fang Xiang [Mon, 30 Oct 2023 08:32:56 +0000 (16:32 +0800)]
irqchip/gic-v3-its: Flush ITS tables correctly in non-coherent GIC designs
[ Upstream commit
d3badb15613c14dd35d3495b1dde5c90fcd616dd ]
In non-coherent GIC designs, the ITS tables must be flushed before writing
to the GITS_BASER<n> registers, otherwise the ITS could read dirty tables,
which results in unpredictable behavior.
Flush the tables right at the begin of its_setup_baser() to prevent that.
[ tglx: Massage changelog ]
Fixes: a8707f553884 ("irqchip/gic-v3: Add Rockchip 3588001 erratum workaround")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fang Xiang <fangxiang3@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231030083256.4345-1-fangxiang3@xiaomi.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuck Lever [Tue, 28 Nov 2023 21:58:40 +0000 (16:58 -0500)]
NFSD: Fix checksum mismatches in the duplicate reply cache
[ Upstream commit
bf51c52a1f3c238d72c64e14d5e7702d3a245b82 ]
nfsd_cache_csum() currently assumes that the server's RPC layer has
been advancing rq_arg.head[0].iov_base as it decodes an incoming
request, because that's the way it used to work. On entry, it
expects that buf->head[0].iov_base points to the start of the NFS
header, and excludes the already-decoded RPC header.
These days however, head[0].iov_base now points to the start of the
RPC header during all processing. It no longer points at the NFS
Call header when execution arrives at nfsd_cache_csum().
In a retransmitted RPC the XID and the NFS header are supposed to
be the same as the original message, but the contents of the
retransmitted RPC header can be different. For example, for krb5,
the GSS sequence number will be different between the two. Thus if
the RPC header is always included in the DRC checksum computation,
the checksum of the retransmitted message might not match the
checksum of the original message, even though the NFS part of these
messages is identical.
The result is that, even if a matching XID is found in the DRC,
the checksum mismatch causes the server to execute the
retransmitted RPC transaction again.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Tue, 28 Nov 2023 21:58:34 +0000 (16:58 -0500)]
NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
[ Upstream commit
1caf5f61dd8430ae5a0b4538afe4953ce7517cbb ]
The "statp + 1" pointer that is passed to nfsd_cache_update() is
supposed to point to the start of the egress NFS Reply header. In
fact, it does point there for AUTH_SYS and RPCSEC_GSS_KRB5 requests.
But both krb5i and krb5p add fields between the RPC header's
accept_stat field and the start of the NFS Reply header. In those
cases, "statp + 1" points at the extra fields instead of the Reply.
The result is that nfsd_cache_update() caches what looks to the
client like garbage.
A connection break can occur for a number of reasons, but the most
common reason when using krb5i/p is a GSS sequence number window
underrun. When an underrun is detected, the server is obliged to
drop the RPC and the connection to force a retransmit with a fresh
GSS sequence number. The client presents the same XID, it hits in
the server's DRC, and the server returns the garbage cache entry.
The "statp + 1" argument has been used since the oldest changeset
in the kernel history repo, so it has been in nfsd_dispatch()
literally since before history began. The problem arose only when
the server-side GSS implementation was added twenty years ago.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 28 Nov 2023 17:20:18 +0000 (17:20 +0000)]
Linux 6.6.3
Link: https://lore.kernel.org/r/20231124172028.107505484@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20231125163158.249616313@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: SeongJae Park <sj@kernel.org>
Link: https://lore.kernel.org/r/20231125194417.090791215@linuxfoundation.org
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20231126154418.032283745@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Nam Cao <namcao@linutronix.de>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lewis Huang [Thu, 19 Oct 2023 09:22:21 +0000 (17:22 +0800)]
drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox
commit
5911d02cac70d7fb52009fbd37423e63f8f6f9bc upstream.
[WHY]
Flush command sent to DMCUB spends more time for execution on
a dGPU than on an APU. This causes cursor lag when using high
refresh rate mouses.
[HOW]
1. Change the DMCUB mailbox memory location from FB to inbox.
2. Only change windows memory to inbox.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Hsieh [Wed, 25 Oct 2023 02:53:35 +0000 (10:53 +0800)]
drm/amd/display: Clear dpcd_sink_ext_caps if not set
commit
923bbfe6c888812db1088d684bd30c24036226d2 upstream.
[WHY]
Some eDP panels' ext caps don't set initial values
and the value of dpcd_addr (0x317) is random.
It means that sometimes the eDP can be OLED, miniLED and etc,
and cause incorrect backlight control interface.
[HOW]
Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tianci Yin [Wed, 1 Nov 2023 01:47:13 +0000 (09:47 +0800)]
drm/amd/display: Enable fast plane updates on DCN3.2 and above
commit
435f5b369657cffee4b04db1f5805b48599f4dbe upstream.
[WHY]
When cursor moves across screen boarder, lag cursor observed,
since subvp settings need to sync up with vblank that causes
cursor updates being delayed.
[HOW]
Enable fast plane updates on DCN3.2 to fix it.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Wed, 8 Nov 2023 19:31:57 +0000 (13:31 -0600)]
drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer()
commit
b71f4ade1b8900d30c661d6c27f87c35214c398c upstream.
When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.
If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.
Cc: stable@vger.kernel.org
Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1")
Link: https://github.com/fwupd/fwupd/issues/6327
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fangzhi Zuo [Mon, 23 Oct 2023 17:57:32 +0000 (13:57 -0400)]
drm/amd/display: Fix DSC not Enabled on Direct MST Sink
commit
a58555359a9f870543aaddef277c3396159895ce upstream.
[WHY & HOW]
For the scenario when a dsc capable MST sink device is directly
connected, it needs to use max dsc compression as the link bw constraint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Kazlauskas [Wed, 13 Sep 2023 20:18:44 +0000 (16:18 -0400)]
drm/amd/display: Guard against invalid RPTR/WPTR being set
commit
1ffa8602e39b89469dc703ebab7a7e44c33da0f7 upstream.
[WHY]
HW can return invalid values on register read, guard against these being
set and causing us to access memory out of range and page fault.
[HOW]
Guard at sync_inbox1 and guard at pushing commands.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Kuehling [Tue, 31 Oct 2023 17:30:00 +0000 (13:30 -0400)]
drm/amdgpu: Fix possible null pointer dereference
commit
256503071c2de2b5b5c20e06654aa9a44f13aa62 upstream.
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update.
Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian König [Thu, 9 Nov 2023 09:14:14 +0000 (10:14 +0100)]
drm/amdgpu: lower CS errors to debug severity
commit
17daf01ab4e3e5a5929747aa05cc15eb2bad5438 upstream.
Otherwise userspace can spam the logs by using incorrect input values.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian König [Thu, 9 Nov 2023 09:12:39 +0000 (10:12 +0100)]
drm/amdgpu: fix error handling in amdgpu_bo_list_get()
commit
12f76050d8d4d10dab96333656b821bd4620d103 upstream.
We should not leak the pointer where we couldn't grab the reference
on to the caller because it can be that the error handling still
tries to put the reference then.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>