radix-tree: remove root->height

The only remaining references to root->height were in extend and shrink,
where it was updated.  Now we can remove it entirely.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix tree test suite: remove dependencies on height

verify_node() can use node->shift instead of the height.

tree_verify_min_height() can be converted over to using node_maxindex()
and shift_maxindex() instead of radix_tree_maxindex().

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: remove a use of root->height from delete_node

If radix_tree_shrink returns whether it managed to shrink, then
__radix_tree_delete_node doesn't ned to query the tree to find out
whether it did any work or not.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: replace node->height with node->shift

node->shift represents the shift necessary for looking in the slots
array at this level.  It is equal to the old (node->height - 1) *
RADIX_TREE_MAP_SHIFT.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: split node->path into offset and height

Neither piece of information we're storing in node->path can be larger
than 64, so store each in its own unsigned char instead of shifting and
masking to store them both in an unsigned int.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: miscellaneous fixes

Typos, whitespace, grammar, line length, using the correct types, etc.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/hwspinlock: use correct radix tree API

radix_tree_is_indirect_ptr() is an internal API.  The correct call to
use is radix_tree_deref_retry() which has the appropriate unlikely()
annotation.

Fixes: c6400ba7e13a ("drivers/hwspinlock: fix race between radix tree insertion and lookup")
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: add copyright statements

The multiorder support is a sufficiently large feature to be worth
adding copyrigt lines for.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix radix_tree_dump() for multi-order entries

 - Print which indices are covered by every leaf entry
 - Print sibling entries
 - Print the node pointer instead of the slot entry
 - Build by default in userspace, and make it accessible to the test-suite

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix radix_tree_range_tag_if_tagged() for multiorder entries

I had previously decided that tagging a single multiorder entry would
count as tagging 2^order entries for the purposes of 'nr_to_tag'.  I now
believe that decision to be a mistake, and it should count as a single
entry.  That's more likely to be what callers expect.

When walking back up the tree from a newly-tagged entry, the current
code assumed we were starting from the lowest level of the tree; if we
have a multiorder entry with an order at least RADIX_TREE_MAP_SHIFT in
size then we need to shift the index by 'shift' before we start walking
back up the tree, or we will end up not setting tags on higher entries,
and then mistakenly thinking that entries below a certain point in the
tree are not tagged.

If the first index we examine is a sibling entry of a tagged multiorder
entry, we were not tagging it.  We need to examine the canonical entry,
and the easiest way to do that is to use radix_tree_descend().  We then
have to skip over sibling slots when looking for the next entry in the
tree or we will end up walking back to the canonical entry.

Add several tests for radix_tree_range_tag_if_tagged().

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: add test for radix_tree_locate_item()

Add a unit test that provides coverage for the bug fixed in the commit
entitled "radix-tree: rewrite radix_tree_locate_item fix" from Hugh
Dickins.  I've verified that this test fails before his patch due to
miscalculated 'index' values in __locate() in lib/radix-tree.c, and
passes with his fix.

Link: http://lkml.kernel.org/r/1462307263-20623-1-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: rewrite radix_tree_locate_item

Use the new multi-order support functions to rewrite
radix_tree_locate_item().  Modify the locate tests to test multiorder
entries too.

[hughd@google.com: radix_tree_locate_item() is often returning the wrong index]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1605012108490.1166@eggly.anvils
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix radix_tree_create for sibling entries

If the radix tree user attempted to insert a colliding entry with an
existing multiorder entry, then radix_tree_create() could encounter a
sibling entry when walking down the tree to look for a slot.  Use
radix_tree_descend() to fix the problem, and add a test-case to make
sure the problem doesn't come back in future.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree test suite: add multi-order tag test

Add a generic test for multi-order tag verification, and call it using
several different configurations.

This test creates a multi-order radix tree using the given index and
order, and then sets, checks and clears tags using the indices covered
by the single multi-order radix tree entry.

With the various calls done by this test we verify root multi-order
entries without siblings, multi-order entries without siblings in a
radix tree node, as well as multi-order entries with siblings of various
sizes.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: rewrite radix_tree_tag_get

Use the new multi-order support functions to rewrite
radix_tree_tag_get()

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: rewrite radix_tree_tag_clear

Use the new multi-order support functions to rewrite
radix_tree_tag_clear()

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: rewrite radix_tree_tag_set

Use the new multi-order support functions to rewrite
radix_tree_tag_set()

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix tree test suite: multi-order iteration test

Add a unit test to verify that we can iterate over multi-order entries
properly via a radix_tree_for_each_slot() loop.

This was done with a single, somewhat complicated configuration that was
meant to test many of the various corner cases having to do with
multi-order entries:

- An iteration could begin at a sibling entry, and we need to return the
  canonical entry.
- We could have entries of various orders in the same slots[] array.
- We could have multi-order entries at a nonzero height, followed by
  indirect pointers to more radix tree nodes later in that same slots[]
  array.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: add support for multi-order iterating

This enables the macros radix_tree_for_each_slot() and friends to be
used with multi-order entries.

The way that this works is that we treat all entries in a given slots[]
array as a single chunk.  If the index given to radix_tree_next_chunk()
happens to point us to a sibling entry, we will back up iter->index so
that it points to the canonical entry, and that will be the place where
we start our iteration.

As we're processing a chunk in radix_tree_next_slot(), we process
canonical entries, skip over sibling entries, and restart the chunk
lookup if we find a non-sibling indirect pointer.  This drops back to
the radix_tree_next_chunk() code, which will re-walk the tree and look
for another chunk.

This allows us to properly handle multi-order entries mixed with other
entries that are at various heights in the radix tree.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix multiorder BUG_ON in radix_tree_insert

These BUG_ON tests are to ensure that all the tags are clear when
inserting a new entry.  If we insert a multiorder entry, we'll end up
looking at the tags for a different node, and so the BUG_ON can end up
triggering spuriously.

Also, we now have three tags, not two, so check all three are clear, and
check all the root tags with a single call to BUG_ON since the bits are
stored contiguously.

Include a test-case to ensure this problem does not reoccur.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: rewrite __radix_tree_lookup

Use the new multi-order support functions to rewrite __radix_tree_lookup()

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix several shrinking bugs with multiorder entries

Setting the indirect bit on the user data entry used to be unambiguous
because the tree walking code knew not to expect internal nodes in the
last level of the tree.  Multiorder entries can appear at any level of
the tree, and a leaf with the indirect bit set is indistinguishable from
a pointer to a node.

Introduce a special entry (RADIX_TREE_RETRY) which is neither a valid
user entry, nor a valid pointer to a node.  The radix_tree_deref_retry()
function continues to work the same way, but tree walking code can
distinguish it from a pointer to a node.

Also fix the condition for setting slot->parent to NULL; it does not
matter what height the tree is, it only matters whether slot is an
indirect pointer.  Move this code above the comment which is referring
to the assignment to root->rnode.

Also fix the condition for preventing the tree from shrinking to a
single entry if it's a multiorder entry.

Add a test-case to the test suite that checks that the tree goes back
down to its original height after an item is inserted & deleted from a
higher index in the tree.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix tree test suite: start adding multiorder tests

Test suite infrastructure for working with multiorder entries.

The test itself is pretty basic: Add an entry, check that all expected
indices return that entry and that indices around that entry don't
return an entry.  Then delete the entry and check no index returns that
entry.  Tests a few edge conditions including the multiorder entry at
index 0 and at a higher index.  Also tests deleting through an alias as
well as through the canonical index.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix extending the tree for multi-order entries at offset 0

The current code will insert entries at each level, as if we're going to
add a new entry at the bottom level, so we then get an -EEXIST when we
try to insert the entry into the tree.  The best way to fix this is to
not check 'order' when inserting into an empty tree.

We still need to 'extend' the tree to the height necessary for the maximum
index corresponding to this entry, so pass that value to
radix_tree_extend() rather than the index we're asked to create, or we
won't create a tree that's deep enough.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: introduce radix_tree_load_root()

All the tree walking functions start with some variant of this code;
centralise it in one place so we're not chasing subtly different bugs
everywhere.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: remove restriction on multi-order entries

Now that sibling pointers are handled explicitly, there is no purpose
served by restricting the order to be >= RADIX_TREE_MAP_SHIFT.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix deleting a multi-order entry through an alias

If we deleted an entry through an index which looked up a sibling
pointer, we'd end up zeroing out the wrong slots in the node.  Use
get_slot_offset() to find the right slot.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix sibling entry insertion

The subtraction was the wrong way round, leading to undefined behaviour
(shift by an amount larger than the size of the type).

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: add missing sibling entry functionality

The code I previously added to enable multiorder radix tree entries was
untested and therefore buggy.  This commit adds the support functions
that Ross and I decided were necessary over a four-week period of
iterating various designs.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

raxix-tree: introduce CONFIG_RADIX_TREE_MULTIORDER

I've been receiving increasingly concerned notes from 0day about how
much my recent changes have been bloating the radix tree.  Make it
happier by only including multiorder support if
CONFIG_TRANSPARENT_HUGEPAGES is set.

This is an independent Kconfig option, so other radix tree users can
also set it if they have a need.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: remove unused looping macros

radix_tree_for_each_chunk() and radix_tree_for_each_chunk_slot() have
never been used in the kernel since their introduction in 2012, so
remove them.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix tree test suite: rebuild when headers change

When we make changes to radix-tree.h in the regular kernel source
(include/linux/radix-tree.h), we really want our test code to be
rebuilt.

We also include a few other headers from tools/include and probably want
to rebuild if these have been changed.

Update the makefile so that all of our objects will be rebuilt when any
of the headers we depend on are changed.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix tree test suite: keep regression test runs short

Currently the full suite of regression tests take upwards of 30 minutes
to run on my development machine.  The vast majority of this time is
taken by the big_gang_check() and copy_tag_check() tests, which each run
their tests through thousands of iterations...does this have value?

Without big_gang_check() and copy_tag_check(), the test suite runs in
around 15 seconds on my box.

Honestly the first time I ever ran through the entire test suite was to
gather the timings for this email - it simply takes too long to be
useful on a normal basis.

Instead, hide the excessive iterations through big_gang_check() and
copy_tag_check() tests behind an '-l' flag (for "long run") in case they
are still useful, but allow the regression test suite to complete in a
reasonable amount of time.  We still run each of these tests a few times
(3 at present) to try and keep the test coverage.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix tree test suite: allow testing other fan-out values

The defines in regression2.c are already in radix-tree.h and duplicating
them in the test case makes experimenting with other values for the
fan-out harder than necessary.  Allow the user of the radix tree to
decide what the fan-out should be rather than fixing it to 8 for
non-kernel uses.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix tree test suite: add tests for radix_tree_locate_item()

Fairly simple tests; add various items to the tree, then make sure we
can find them again.  Also check that a pointer that we know isn't in
the tree is not found.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix tree test suite: fix build

Add an empty linux/init.h, and definitions for a few parts of the kernel
API either in use now, or to be used in the near future.  Start using the
common definitions in tools/include/linux, although more work needs to be
done here.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: introduce radix_tree_empty

Commit e61452365372 ("radix_tree: add support for multi-order entries")
left the impression that the support for multiorder radix tree entries
was functional.  As soon as Ross tried to use it, it became apparent
that my testing was completely inadequate, and it didn't even work a
little bit for orders that were not a multiple of shift.

This series of patches is the result of about 6 weeks of redesign,
reimplementation, testing, arguing and hair-pulling.  The great news is
that the test-suite is now far better than it was.  That's reflected in
the diffstat for the test-suite alone:

 12 files changed, 436 insertions(+), 28 deletions(-)

The highlight for users of the tree is that the restriction on the order
of inserted entries being >= RADIX_TREE_MAP_SHIFT is now gone; the radix
tree now supports any order between 0 and 64.

For those who are interested in how the tree works, patch 9 is probably
the most interesting one as it introduces the new machinery for handling
sibling entries.

I've tried to be fair in attributing authorship to the person who
contributed the majority of the code in each patch; Ross has been an
invaluable partner in the development of this support and it's fair to
say that each of us has code in every commit.

I should also express my appreciation of the 0day testing.  It prompted
me that I was bloating the tinyconfig in an unacceptable way, and it
bisected to a commit which contained a rather nasty memory-corruption
bug.

This patch (of 29):

The irqdomain code was checking for 0 or 1 entries, not 0 entries like
the comment said they were.  Introduce a new helper that will actually
check for an empty tree.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/platform/x86/wmi.c: use generic UUID library

Instead of opencoding let's use generic UUID library functions here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

block/partitions/ldm.c: use generic UUID library

Instead of opencoding let's use generic UUID library functions here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/genhd.h: move to use generic UUID library

UUID library provides uuid_be type and uuid_be_to_bin() function.  This
substitutes open coded variant by generic library calls.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/efivarfs/inode.c: use generic UUID library

Instead of opencoding let's use generic UUID library functions here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/efi.h: redefine type, constant, macro from generic code

Generic UUID library defines structure type, macro to define UUID, and
the length of the UUID string.  This patch removes duplicate data
structure definition, UUID string length constant as well as macro for
UUID handling.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sysctl_binary.c: use generic UUID library

UUID library provides uuid_be type and uuid_be_to_bin() function.  This
substitutes open coded variant by generic library calls.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/uuid.c: remove FSF address

There is no point in keeping an address in the file since it's subject
to change.

While here, update Intel Copyright years.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/uuid.c: introduce a few more generic helpers

There are new helpers in this patch:

  uuid_is_valid checks if a UUID is valid
  uuid_be_to_bin converts from string to binary (big endian)
  uuid_le_to_bin converts from string to binary (little endian)

They will be used in future, i.e. in the following patches in the series.

This also moves the indices arrays to lib/uuid.c to be shared accross
modules.

[andriy.shevchenko@linux.intel.com: fix typo]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/uuid.c: move generate_random_uuid() to uuid.c

Let's gather the UUID related functions under one hood.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

security/integrity/ima/ima_policy.c: use %pU to output UUID in printable format

Instead of open coded variant re-use extension that vsprintf.c provides
us for ages.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf: simplify UUID printing

There are few functions here and there along with type definitions that
provide UUID API.  This series consolidates everything under one hood
and converts current users.

This has been tested for a while internally, however it doesn't mean we
covered all possible cases (especially accuracy of UUID constants after
conversion).  So, please test this as much as you can and provide your
tag.  We appreciate the effort.

The ACPI conversion is postponed for now to sort more generic things out
first.

This patch (of 9):

Since we have hex_byte_pack_upper() we may use it directly and avoid
second loop.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove Koichi Yasutake

The MTA says:
 <yasutake.koichi@jp.panasonic.com>: unknown user:
    "yasutake.koichi@jp.panasonic.com"

Link: http://lkml.kernel.org/r/1462776755-9607-1-git-send-email-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove defunct spear mailing list

It looks like the email address for this mailing list doesn't exist anymore:
<spear-devel@list.st.com>: host mxb-00178001.gslb.pphosted.com[91.207.212.93] said:
550 5.1.1 User Unknown (in reply to RCPT TO command)

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove linux@lists.openrisc.net

$ host -t mx lists.openrisc.net
Host lists.openrisc.net not found: 3(NXDOMAIN)

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk/nmi: flush NMI messages on the system panic

In NMI context, printk() messages are stored into per-CPU buffers to
avoid a possible deadlock.  They are normally flushed to the main ring
buffer via an IRQ work.  But the work is never called when the system
calls panic() in the very same NMI handler.

This patch tries to flush NMI buffers before the crash dump is
generated.  In this case it does not risk a double release and bails out
when the logbuf_lock is already taken.  The aim is to get the messages
into the main ring buffer when possible.  It makes them better
accessible in the vmcore.

Then the patch tries to flush the buffers second time when other CPUs
are down.  It might be more aggressive and reset logbuf_lock.  The aim
is to get the messages available for the consequent kmsg_dump() and
console_flush_on_panic() calls.

The patch causes vprintk_emit() to be called even in NMI context again.
But it is done via printk_deferred() so that the console handling is
skipped.  Consoles use internal locks and we could not prevent a
deadlock easily.  They are explicitly called later when the crash dump
is not generated, see console_flush_on_panic().

Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk/nmi: increase the size of NMI buffer and make it configurable

Testing has shown that the backtrace sometimes does not fit into the 4kB
temporary buffer that is used in NMI context.  The warnings are gone
when I double the temporary buffer size.

This patch doubles the buffer size and makes it configurable.

Note that this problem existed even in the x86-specific implementation
that was added by the commit a9edc8809328 ("x86/nmi: Perform a safe NMI
stack trace on all CPUs").  Nobody noticed it because it did not print
any warnings.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk/nmi: warn when some message has been lost in NMI context

We could not resize the temporary buffer in NMI context.  Let's warn if
a message is lost.

This is rather theoretical.  printk() should not be used in NMI.  The
only sensible use is when we want to print backtrace from all CPUs.  The
current buffer should be enough for this purpose.

[akpm@linux-foundation.org: whitespace fixlet]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk/nmi: generic solution for safe printk in NMI

printk() takes some locks and could not be used a safe way in NMI
context.

The chance of a deadlock is real especially when printing stacks from
all CPUs.  This particular problem has been addressed on x86 by the
commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").

The patchset brings two big advantages.  First, it makes the NMI
backtraces safe on all architectures for free.  Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited.  We still should keep the number of messages in NMI context at
minimum).

Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers.  These are not easy to avoid.

This patch reuses most of the code and makes it generic.  It is useful
for all messages and architectures that support NMI.

The alternative printk_func is set when entering and is reseted when
leaving NMI context.  It queues IRQ work to copy the messages into the
main ring buffer in a safe context.

__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers.  There is also used a spinlock to get synchronized with other
flushers.

We do not longer use seq_buf because it depends on external lock.  It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.

The code is put into separate printk/nmi.c as suggested by Steven
Rostedt.  It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter().  This is achieved by the new
HAVE_NMI Kconfig flag.

The are MN10300 and Xtensa architectures.  We need to clean up NMI
handling there first.  Let's do it separately.

The patch is heavily based on the draft from Peter Zijlstra, see

  https://lkml.org/lkml/2015/6/10/327

[arnd@arndb.de: printk-nmi: use %zu format string for size_t]
[akpm@linux-foundation.org: min_t->min - all types are size_t here]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part]
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/syscalls.h: use pid_t instead of int

In include/linux/syscalls.h, the four functions sys_kill, sys_tgkill,
sys_tkill and sys_rt_sigqueueinfo are declared with "int pid" and "int
tgid".

However, in kernel/signal.c, the corresponding definitions use the more
appropriate "pid_t" (which is a typedef'd int).

This patch changes "int" to "pid_t" in the declarations of sys_kill,
sys_tgkill, sys_tkill and sys_rt_sigqueueinfo in <linux/syscalls.h> in
order to harmonize the function declarations with their respective
definitions.

Link: http://lkml.kernel.org/r/57302FDA.7020205@renenyffenegger.ch
Signed-off-by: René Nyffenegger <mail@renenyffenegger.ch>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
Cc: Zach Brown <zab@redhat.com>
Cc: Milosz Tanski <milosz@adfin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fork: free thread in copy_process on failure

When using this program (as root):

#include <err.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

#include <sys/io.h>
#include <sys/types.h>
#include <sys/wait.h>

#define ITER 1000
#define FORKERS 15
#define THREADS (6000/FORKERS) // 1850 is proc max

static void fork_100_wait()
{
unsigned a, to_wait = 0;

printf("\t%d forking %d\n", THREADS, getpid());

for (a = 0; a < THREADS; a++) {
switch (fork()) {
case 0:
usleep(1000);
exit(0);
break;
case -1:
break;
default:
to_wait++;
break;
}
}

printf("\t%d forked from %d, waiting for %d\n", THREADS, getpid(),
to_wait);

for (a = 0; a < to_wait; a++)
wait(NULL);

printf("\t%d waited from %d\n", THREADS, getpid());
}

static void run_forkers()
{
pid_t forkers[FORKERS];
unsigned a;

for (a = 0; a < FORKERS; a++) {
switch ((forkers[a] = fork())) {
case 0:
fork_100_wait();
exit(0);
break;
case -1:
err(1, "DIE fork of %d'th forker", a);
break;
default:
break;
}
}

for (a = 0; a < FORKERS; a++)
waitpid(forkers[a], NULL, 0);
}

int main()
{
unsigned a;
int ret;

ret = ioperm(10, 20, 0);
if (ret < 0)
err(1, "ioperm");

for (a = 0; a < ITER; a++)
run_forkers();

return 0;
}

kmemleak reports many occurences of this leak:
unreferenced object 0xffff8805917c8000 (size 8192):
  comm "fork-leak", pid 2932, jiffies 4295354292 (age 1871.028s)
  hex dump (first 32 bytes):
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
  backtrace:
    [<ffffffff814cfbf5>] kmemdup+0x25/0x50
    [<ffffffff8103ab43>] copy_thread_tls+0x6c3/0x9a0
    [<ffffffff81150174>] copy_process+0x1a84/0x5790
    [<ffffffff811dc375>] wake_up_new_task+0x2d5/0x6f0
    [<ffffffff8115411d>] _do_fork+0x12d/0x820
...

Due to the leakage of the memory items which should have been freed in
arch/x86/kernel/process.c:exit_thread().

Make sure the memory is freed when fork fails later in copy_process.
This is done by calling exit_thread with the thread to kill.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exit_thread: accept a task parameter to be exited

We need to call exit_thread from copy_process in a fail path.  So make it
accept task_struct as a parameter.

[v2]
* s390: exit_thread_runtime_instr doesn't make sense to be called for
  non-current tasks.
* arm: fix the comment in vfp_thread_copy
* change 'me' to 'tsk' for task_struct
* now we can change only archs that actually have exit_thread

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exit_thread: remove empty bodies

Define HAVE_EXIT_THREAD for archs which want to do something in
exit_thread. For others, let's define exit_thread as an empty inline.

This is a cleanup before we change the prototype of exit_thread to
accept a task parameter.

[akpm@linux-foundation.org: fix mips]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mn10300: let exit_fpu accept a task

We need to call exit_thread from copy_process in a fail path.  Since
exit_thread on mn10300 calls exit_thread_runtime_instr, make it accept
task_struct as a parameter now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs: fix pthread cross-thread naming if !PR_DUMPABLE

The PR_DUMPABLE flag causes the pid related paths of the proc file
system to be owned by ROOT.

The implementation of pthread_set/getname_np however needs access to
/proc/<pid>/task/<tid>/comm.  If PR_DUMPABLE is false this
implementation is locked out.

This patch installs a special permission function for the file "comm"
that grants read and write access to all threads of the same group
regardless of the ownership of the inode.  For all other threads the
function falls back to the generic inode permission check.

[akpm@linux-foundation.org: fix spello in comment]
Signed-off-by: Janis Danisevskis <jdanis@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Minfei Huang <mnfhuang@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Jann Horn <jann@thejh.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs: expose umask in /proc/<PID>/status

It's not possible to read the process umask without also modifying it,
which is what umask(2) does.  A library cannot read umask safely,
especially if the main program might be multithreaded.

Add a new status line ("Umask") in /proc/<PID>/status.  It contains the
file mode creation mask (umask) in octal.  It is only shown for tasks
which have task->fs.

This patch is adapted from one originally written by Pierre Carrier.

The use case is that we have endless trouble with people setting weird
umask() values (usually on the grounds of "security"), and then
everything breaking.  I'm on the hook to fix these.  We'd like to add
debugging to our program so we can dump out the umask in debug reports.

Previous versions of the patch used a syscall so you could only read
your own umask.  That's all I need.  However there was quite a lot of
push-back from those, so this new version exports it in /proc.

See:
  https://lkml.org/lkml/2016/4/13/704 [umask2]
  https://lkml.org/lkml/2016/4/13/487 [getumask]

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pierre Carrier <pierre@spotify.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: introduce per-device debug_stat sysfs node

debug_stat sysfs is read-only and represents various debugging data that
zram developers may need.  This file is not meant to be used by anyone
else: its content is not documented and will change any time w/o any
notice.  Therefore, the output of debug_stat file contains a version
string.  To avoid any confusion, we will increase the version number
every time we modify the output.

At the moment this file exports only one value -- the number of
re-compressions, IOW, the number of times compression fast path has
failed.  This stat is temporary any will be useful in case if any
per-cpu compression streams regressions will be reported.

Link: http://lkml.kernel.org/r/20160513230834.GB26763@bbox
Link: http://lkml.kernel.org/r/20160511134553.12655-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: remove max_comp_streams internals

Remove the internal part of max_comp_streams interface, since we
switched to per-cpu streams.  We will keep RW max_comp_streams attr
around, because:

a) we may (silently) switch back to idle compression streams list and
   don't want to disturb user space

b) max_comp_streams attr must wait for the next 'lay off cycle'; we
   give user space 2 years to adjust before we remove/downgrade the attr,
   and there are already several attrs scheduled for removal in 4.11, so
   it's too late for max_comp_streams.

This slightly change a user visible behaviour:

- First, reading from max_comp_stream file now will always return the
  number of online CPUs.

- Second, writing to max_comp_stream will not take any effect.

Link: http://lkml.kernel.org/r/20160503165546.25201-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zsmalloc: don't fail if can't create debugfs info

Change the return type of zs_pool_stat_create() to void, and remove the
logic to abort pool creation if the stat debugfs dir/file could not be
created.

The debugfs stat file is for debugging/information only, and doesn't
affect operation of zsmalloc; there is no reason to abort creating the
pool if the stat file can't be created.  This was seen with zswap, which
used the same name for all pool creations, which caused zsmalloc to fail
to create a second pool for zswap if CONFIG_ZSMALLOC_STAT was enabled.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dan Streetman <dan.streetman@canonical.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zswap: use workqueue to destroy pool

Add a work_struct to struct zswap_pool, and change __zswap_pool_empty to
use the workqueue instead of using call_rcu().

When zswap destroys a pool no longer in use, it uses call_rcu() to
perform the destruction/freeing.  Since that executes in softirq
context, it must not sleep.  However, actually destroying the pool
involves freeing the per-cpu compressors (which requires locking the
cpu_add_remove_lock mutex) and freeing the zpool, for which the
implementation may sleep (e.g.  zsmalloc calls kmem_cache_destroy, which
locks the slab_mutex).  So if either mutex is currently taken, or any
other part of the compressor or zpool implementation sleeps, it will
result in a BUG().

It's not easy to reproduce this when changing zswap's params normally.
In testing with a loaded system, this does not fail:

  $ cd /sys/module/zswap/parameters
  $ echo lz4 > compressor ; echo zsmalloc > zpool

nor does this:

  $ while true ; do
  > echo lzo > compressor ; echo zbud > zpool
  > sleep 1
  > echo lz4 > compressor ; echo zsmalloc > zpool
  > sleep 1
  > done

although it's still possible either of those might fail, depending on
whether anything else besides zswap has locked the mutexes.

However, changing a parameter with no delay immediately causes the
schedule while atomic BUG:

  $ while true ; do
  > echo lzo > compressor ; echo lz4 > compressor
  > done

This is essentially the same as Yu Zhao's proposed patch to zsmalloc,
but moved to zswap, to cover compressor and zpool freeing.

Fixes: f1c54846ee45 ("zswap: dynamic pool creation")
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Streetman <dan.streetman@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: user per-cpu compression streams

Remove idle streams list and keep compression streams in per-cpu data.
This removes two contented spin_lock()/spin_unlock() calls from write
path and also prevent write OP from being preempted while holding the
compression stream, which can cause slow downs.

For instance, let's assume that we have N cpus and N-2
max_comp_streams.TASK1 owns the last idle stream, TASK2-TASK3 come in
with the write requests:

  TASK1            TASK2              TASK3
 zram_bvec_write()
  spin_lock
  find stream
  spin_unlock

  compress

  <<preempted>>   zram_bvec_write()
                   spin_lock
                   find stream
                   spin_unlock
                     no_stream
                       schedule
                                     zram_bvec_write()
                                      spin_lock
                                      find_stream
                                      spin_unlock
                                        no_stream
                                          schedule
   spin_lock
   release stream
   spin_unlock
     wake up TASK2

not only TASK2 and TASK3 will not get the stream, TASK1 will be
preempted in the middle of its operation; while we would prefer it to
finish compression and release the stream.

Test environment: x86_64, 4 CPU box, 3G zram, lzo

The following fio tests were executed:
      read, randread, write, randwrite, rw, randrw
with the increasing number of jobs from 1 to 10.

                  4 streams        8 streams       per-cpu
  ===========================================================
  jobs1
  READ:           2520.1MB/s       2566.5MB/s      2491.5MB/s
  READ:           2102.7MB/s       2104.2MB/s      2091.3MB/s
  WRITE:          1355.1MB/s       1320.2MB/s      1378.9MB/s
  WRITE:          1103.5MB/s       1097.2MB/s      1122.5MB/s
  READ:           434013KB/s       435153KB/s      439961KB/s
  WRITE:          433969KB/s       435109KB/s      439917KB/s
  READ:           403166KB/s       405139KB/s      403373KB/s
  WRITE:          403223KB/s       405197KB/s      403430KB/s
  jobs2
  READ:           7958.6MB/s       8105.6MB/s      8073.7MB/s
  READ:           6864.9MB/s       6989.8MB/s      7021.8MB/s
  WRITE:          2438.1MB/s       2346.9MB/s      3400.2MB/s
  WRITE:          1994.2MB/s       1990.3MB/s      2941.2MB/s
  READ:           981504KB/s       973906KB/s      1018.8MB/s
  WRITE:          981659KB/s       974060KB/s      1018.1MB/s
  READ:           937021KB/s       938976KB/s      987250KB/s
  WRITE:          934878KB/s       936830KB/s      984993KB/s
  jobs3
  READ:           13280MB/s        13553MB/s       13553MB/s
  READ:           11534MB/s        11785MB/s       11755MB/s
  WRITE:          3456.9MB/s       3469.9MB/s      4810.3MB/s
  WRITE:          3029.6MB/s       3031.6MB/s      4264.8MB/s
  READ:           1363.8MB/s       1362.6MB/s      1448.9MB/s
  WRITE:          1361.9MB/s       1360.7MB/s      1446.9MB/s
  READ:           1309.4MB/s       1310.6MB/s      1397.5MB/s
  WRITE:          1307.4MB/s       1308.5MB/s      1395.3MB/s
  jobs4
  READ:           20244MB/s        20177MB/s       20344MB/s
  READ:           17886MB/s        17913MB/s       17835MB/s
  WRITE:          4071.6MB/s       4046.1MB/s      6370.2MB/s
  WRITE:          3608.9MB/s       3576.3MB/s      5785.4MB/s
  READ:           1824.3MB/s       1821.6MB/s      1997.5MB/s
  WRITE:          1819.8MB/s       1817.4MB/s      1992.5MB/s
  READ:           1765.7MB/s       1768.3MB/s      1937.3MB/s
  WRITE:          1767.5MB/s       1769.1MB/s      1939.2MB/s
  jobs5
  READ:           18663MB/s        18986MB/s       18823MB/s
  READ:           16659MB/s        16605MB/s       16954MB/s
  WRITE:          3912.4MB/s       3888.7MB/s      6126.9MB/s
  WRITE:          3506.4MB/s       3442.5MB/s      5519.3MB/s
  READ:           1798.2MB/s       1746.5MB/s      1935.8MB/s
  WRITE:          1792.7MB/s       1740.7MB/s      1929.1MB/s
  READ:           1727.6MB/s       1658.2MB/s      1917.3MB/s
  WRITE:          1726.5MB/s       1657.2MB/s      1916.6MB/s
  jobs6
  READ:           21017MB/s        20922MB/s       21162MB/s
  READ:           19022MB/s        19140MB/s       18770MB/s
  WRITE:          3968.2MB/s       4037.7MB/s      6620.8MB/s
  WRITE:          3643.5MB/s       3590.2MB/s      6027.5MB/s
  READ:           1871.8MB/s       1880.5MB/s      2049.9MB/s
  WRITE:          1867.8MB/s       1877.2MB/s      2046.2MB/s
  READ:           1755.8MB/s       1710.3MB/s      1964.7MB/s
  WRITE:          1750.5MB/s       1705.9MB/s      1958.8MB/s
  jobs7
  READ:           21103MB/s        20677MB/s       21482MB/s
  READ:           18522MB/s        18379MB/s       19443MB/s
  WRITE:          4022.5MB/s       4067.4MB/s      6755.9MB/s
  WRITE:          3691.7MB/s       3695.5MB/s      5925.6MB/s
  READ:           1841.5MB/s       1933.9MB/s      2090.5MB/s
  WRITE:          1842.7MB/s       1935.3MB/s      2091.9MB/s
  READ:           1832.4MB/s       1856.4MB/s      1971.5MB/s
  WRITE:          1822.3MB/s       1846.2MB/s      1960.6MB/s
  jobs8
  READ:           20463MB/s        20194MB/s       20862MB/s
  READ:           18178MB/s        17978MB/s       18299MB/s
  WRITE:          4085.9MB/s       4060.2MB/s      7023.8MB/s
  WRITE:          3776.3MB/s       3737.9MB/s      6278.2MB/s
  READ:           1957.6MB/s       1944.4MB/s      2109.5MB/s
  WRITE:          1959.2MB/s       1946.2MB/s      2111.4MB/s
  READ:           1900.6MB/s       1885.7MB/s      2082.1MB/s
  WRITE:          1896.2MB/s       1881.4MB/s      2078.3MB/s
  jobs9
  READ:           19692MB/s        19734MB/s       19334MB/s
  READ:           17678MB/s        18249MB/s       17666MB/s
  WRITE:          4004.7MB/s       4064.8MB/s      6990.7MB/s
  WRITE:          3724.7MB/s       3772.1MB/s      6193.6MB/s
  READ:           1953.7MB/s       1967.3MB/s      2105.6MB/s
  WRITE:          1953.4MB/s       1966.7MB/s      2104.1MB/s
  READ:           1860.4MB/s       1897.4MB/s      2068.5MB/s
  WRITE:          1858.9MB/s       1895.9MB/s      2066.8MB/s
  jobs10
  READ:           19730MB/s        19579MB/s       19492MB/s
  READ:           18028MB/s        18018MB/s       18221MB/s
  WRITE:          4027.3MB/s       4090.6MB/s      7020.1MB/s
  WRITE:          3810.5MB/s       3846.8MB/s      6426.8MB/s
  READ:           1956.1MB/s       1994.6MB/s      2145.2MB/s
  WRITE:          1955.9MB/s       1993.5MB/s      2144.8MB/s
  READ:           1852.8MB/s       1911.6MB/s      2075.8MB/s
  WRITE:          1855.7MB/s       1914.6MB/s      2078.1MB/s

perf stat

                                  4 streams                       8 streams                       per-cpu
  ====================================================================================================================
  jobs1
  stalled-cycles-frontend      23,174,811,209 (  38.21%)     23,220,254,188 (  38.25%)       23,061,406,918 (  38.34%)
  stalled-cycles-backend       11,514,174,638 (  18.98%)     11,696,722,657 (  19.27%)       11,370,852,810 (  18.90%)
  instructions                 73,925,005,782 (    1.22)     73,903,177,632 (    1.22)       73,507,201,037 (    1.22)
  branches                     14,455,124,835 ( 756.063)     14,455,184,779 ( 755.281)       14,378,599,509 ( 758.546)
  branch-misses                    69,801,336 (   0.48%)         80,225,529 (   0.55%)           72,044,726 (   0.50%)
  jobs2
  stalled-cycles-frontend      49,912,741,782 (  46.11%)     50,101,189,290 (  45.95%)       32,874,195,633 (  35.11%)
  stalled-cycles-backend       27,080,366,230 (  25.02%)     27,949,970,232 (  25.63%)       16,461,222,706 (  17.58%)
  instructions                122,831,629,690 (    1.13)    122,919,846,419 (    1.13)      121,924,786,775 (    1.30)
  branches                     23,725,889,239 ( 692.663)     23,733,547,140 ( 688.062)       23,553,950,311 ( 794.794)
  branch-misses                    90,733,041 (   0.38%)         96,320,895 (   0.41%)           84,561,092 (   0.36%)
  jobs3
  stalled-cycles-frontend      66,437,834,608 (  45.58%)     63,534,923,344 (  43.69%)       42,101,478,505 (  33.19%)
  stalled-cycles-backend       34,940,799,661 (  23.97%)     34,774,043,148 (  23.91%)       21,163,324,388 (  16.68%)
  instructions                171,692,121,862 (    1.18)    171,775,373,044 (    1.18)      170,353,542,261 (    1.34)
  branches                     32,968,962,622 ( 628.723)     32,987,739,894 ( 630.512)       32,729,463,918 ( 717.027)
  branch-misses                   111,522,732 (   0.34%)        110,472,894 (   0.33%)           99,791,291 (   0.30%)
  jobs4
  stalled-cycles-frontend      98,741,701,675 (  49.72%)     94,797,349,965 (  47.59%)       54,535,655,381 (  33.53%)
  stalled-cycles-backend       54,642,609,615 (  27.51%)     55,233,554,408 (  27.73%)       27,882,323,541 (  17.14%)
  instructions                220,884,807,851 (    1.11)    220,930,887,273 (    1.11)      218,926,845,851 (    1.35)
  branches                     42,354,518,180 ( 592.105)     42,362,770,587 ( 590.452)       41,955,552,870 ( 716.154)
  branch-misses                   138,093,449 (   0.33%)        131,295,286 (   0.31%)          121,794,771 (   0.29%)
  jobs5
  stalled-cycles-frontend     116,219,747,212 (  48.14%)    110,310,397,012 (  46.29%)       66,373,082,723 (  33.70%)
  stalled-cycles-backend       66,325,434,776 (  27.48%)     64,157,087,914 (  26.92%)       32,999,097,299 (  16.76%)
  instructions                270,615,008,466 (    1.12)    270,546,409,525 (    1.14)      268,439,910,948 (    1.36)
  branches                     51,834,046,557 ( 599.108)     51,811,867,722 ( 608.883)       51,412,576,077 ( 729.213)
  branch-misses                   158,197,086 (   0.31%)        142,639,805 (   0.28%)          133,425,455 (   0.26%)
  jobs6
  stalled-cycles-frontend     138,009,414,492 (  48.23%)    139,063,571,254 (  48.80%)       75,278,568,278 (  32.80%)
  stalled-cycles-backend       79,211,949,650 (  27.68%)     79,077,241,028 (  27.75%)       37,735,797,899 (  16.44%)
  instructions                319,763,993,731 (    1.12)    319,937,782,834 (    1.12)      316,663,600,784 (    1.38)
  branches                     61,219,433,294 ( 595.056)     61,250,355,540 ( 598.215)       60,523,446,617 ( 733.706)
  branch-misses                   169,257,123 (   0.28%)        154,898,028 (   0.25%)          141,180,587 (   0.23%)
  jobs7
  stalled-cycles-frontend     162,974,812,119 (  49.20%)    159,290,061,987 (  48.43%)       88,046,641,169 (  33.21%)
  stalled-cycles-backend       92,223,151,661 (  27.84%)     91,667,904,406 (  27.87%)       44,068,454,971 (  16.62%)
  instructions                369,516,432,430 (    1.12)    369,361,799,063 (    1.12)      365,290,380,661 (    1.38)
  branches                     70,795,673,950 ( 594.220)     70,743,136,124 ( 597.876)       69,803,996,038 ( 732.822)
  branch-misses                   181,708,327 (   0.26%)        165,767,821 (   0.23%)          150,109,797 (   0.22%)
  jobs8
  stalled-cycles-frontend     185,000,017,027 (  49.30%)    182,334,345,473 (  48.37%)       99,980,147,041 (  33.26%)
  stalled-cycles-backend      105,753,516,186 (  28.18%)    107,937,830,322 (  28.63%)       51,404,177,181 (  17.10%)
  instructions                418,153,161,055 (    1.11)    418,308,565,828 (    1.11)      413,653,475,581 (    1.38)
  branches                     80,035,882,398 ( 592.296)     80,063,204,510 ( 589.843)       79,024,105,589 ( 730.530)
  branch-misses                   199,764,528 (   0.25%)        177,936,926 (   0.22%)          160,525,449 (   0.20%)
  jobs9
  stalled-cycles-frontend     210,941,799,094 (  49.63%)    204,714,679,254 (  48.55%)      114,251,113,756 (  33.96%)
  stalled-cycles-backend      122,640,849,067 (  28.85%)    122,188,553,256 (  28.98%)       58,360,041,127 (  17.35%)
  instructions                468,151,025,415 (    1.10)    467,354,869,323 (    1.11)      462,665,165,216 (    1.38)
  branches                     89,657,067,510 ( 585.628)     89,411,550,407 ( 588.990)       88,360,523,943 ( 730.151)
  branch-misses                   218,292,301 (   0.24%)        191,701,247 (   0.21%)          178,535,678 (   0.20%)
  jobs10
  stalled-cycles-frontend     233,595,958,008 (  49.81%)    227,540,615,689 (  49.11%)      160,341,979,938 (  43.07%)
  stalled-cycles-backend      136,153,676,021 (  29.03%)    133,635,240,742 (  28.84%)       65,909,135,465 (  17.70%)
  instructions                517,001,168,497 (    1.10)    516,210,976,158 (    1.11)      511,374,038,613 (    1.37)
  branches                     98,911,641,329 ( 585.796)     98,700,069,712 ( 591.583)       97,646,761,028 ( 728.712)
  branch-misses                   232,341,823 (   0.23%)        199,256,308 (   0.20%)          183,135,268 (   0.19%)

per-cpu streams tend to cause significantly less stalled cycles; execute
less branches and hit less branch-misses.

perf stat reported execution time

                          4 streams        8 streams       per-cpu
  ====================================================================
  jobs1
  seconds elapsed        20.909073870     20.875670495    20.817838540
  jobs2
  seconds elapsed        18.529488399     18.720566469    16.356103108
  jobs3
  seconds elapsed        18.991159531     18.991340812    16.766216066
  jobs4
  seconds elapsed        19.560643828     19.551323547    16.246621715
  jobs5
  seconds elapsed        24.746498464     25.221646740    20.696112444
  jobs6
  seconds elapsed        28.258181828     28.289765505    22.885688857
  jobs7
  seconds elapsed        32.632490241     31.909125381    26.272753738
  jobs8
  seconds elapsed        35.651403851     36.027596308    29.108024711
  jobs9
  seconds elapsed        40.569362365     40.024227989    32.898204012
  jobs10
  seconds elapsed        44.673112304     43.874898137    35.632952191

Please see
Link: http://marc.info/?l=linux-kernel&m=146166970727530
Link: http://marc.info/?l=linux-kernel&m=146174716719650
for more test results (under low memory conditions).

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: require GFP in zs_malloc()

Pass GFP flags to zs_malloc() instead of using a fixed mask supplied to
zs_create_pool(), so we can be more flexible, but, more importantly, we
need this to switch zram to per-cpu compression streams -- zram will try
to allocate handle with preemption disabled in a fast path and switch to
a slow path (using different gfp mask) if the fast one has failed.

Apart from that, this also align zs_malloc() interface with zspool/zbud.

[sergey.senozhatsky@gmail.com: pass GFP flags to zs_malloc() instead of using a fixed mask]
Link: http://lkml.kernel.org/r/20160429150942.GA637@swordfish
Link: http://lkml.kernel.org/r/20160429150942.GA637@swordfish
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: remove unused pool param in obj_free

Let's remove unused pool param in obj_free

Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: reorder function parameters

Clean up function parameter ordering to order higher data structure
first.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: clean up many BUG_ON

There are many BUG_ON in zsmalloc.c which is not recommened so change
them as alternatives.

Normal rule is as follows:

1. avoid BUG_ON if possible. Instead, use VM_BUG_ON or VM_BUG_ON_PAGE

2. use VM_BUG_ON_PAGE if we need to see struct page's fields

3. use those assertion in primitive functions so higher functions can
   rely on the assertion in the primitive function.

4. Don't use assertion if following instruction can trigger Oops

Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: use first_page rather than page

Clean up function parameter "struct page".  Many functions of zsmalloc
expect that page paramter is "first_page" so use "first_page" rather
than "page" for code readability.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan/tests: add tests for user memory access functions

Add some tests for the newly-added user memory access API.

Link: http://lkml.kernel.org/r/1462538722-1574-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/kasan: instrument user memory access API

Exchange between user and kernel memory is coded in assembly language.
Which means that such accesses won't be spotted by KASAN as a compiler
instruments only C code.

Add explicit KASAN checks to user memory access API to ensure that
userspace writes to (or reads from) a valid kernel memory.

Note: Unlike others strncpy_from_user() is written mostly in C and KASAN
sees memory accesses in it.  However, it makes sense to add explicit
check for all @count bytes that *potentially* could be written to the
kernel.

[aryabinin@virtuozzo.com: move kasan check under the condition]
Link: http://lkml.kernel.org/r/1462869209-21096-1-git-send-email-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/1462538722-1574-4-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/kasan: add API to check memory regions

Memory access coded in an assembly won't be seen by KASAN as a compiler
can instrument only C code.  Add kasan_check_[read,write]() API which is
going to be used to check a certain memory range.

Link: http://lkml.kernel.org/r/1462538722-1574-3-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/kasan: print name of mem[set,cpy,move]() caller in report

When bogus memory access happens in mem[set,cpy,move]() it's usually
caller's fault.  So don't blame mem[set,cpy,move]() in bug report, blame
the caller instead.

Before:
  BUG: KASAN: out-of-bounds access in memset+0x23/0x40 at <address>
After:
  BUG: KASAN: out-of-bounds access in <memset_caller> at <address>

Link: http://lkml.kernel.org/r/1462538722-1574-2-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, kasan: add a ksize() test

Add a test that makes sure ksize() unpoisons the whole chunk.

Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Konstantin Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, kasan: don't call kasan_krealloc() from ksize().

Instead of calling kasan_krealloc(), which replaces the memory
allocation stack ID (if stack depot is used), just unpoison the whole
memory chunk.

Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Konstantin Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: kasan: initial memory quarantine implementation

Quarantine isolates freed objects in a separate queue.  The objects are
returned to the allocator later, which helps to detect use-after-free
errors.

When the object is freed, its state changes from KASAN_STATE_ALLOC to
KASAN_STATE_QUARANTINE.  The object is poisoned and put into quarantine
instead of being returned to the allocator, therefore every subsequent
access to that object triggers a KASAN error, and the error handler is
able to say where the object has been allocated and deallocated.

When it's time for the object to leave quarantine, its state becomes
KASAN_STATE_FREE and it's returned to the allocator.  From now on the
allocator may reuse it for another allocation.  Before that happens,
it's still possible to detect a use-after free on that object (it
retains the allocation/deallocation stacks).

When the allocator reuses this object, the shadow is unpoisoned and old
allocation/deallocation stacks are wiped.  Therefore a use of this
object, even an incorrect one, won't trigger ASan warning.

Without the quarantine, it's not guaranteed that the objects aren't
reused immediately, that's why the probability of catching a
use-after-free is lower than with quarantine in place.

Quarantine isolates freed objects in a separate queue.  The objects are
returned to the allocator later, which helps to detect use-after-free
errors.

Freed objects are first added to per-cpu quarantine queues.  When a
cache is destroyed or memory shrinking is requested, the objects are
moved into the global quarantine queue.  Whenever a kmalloc call allows
memory reclaiming, the oldest objects are popped out of the global queue
until the total size of objects in quarantine is less than 3/4 of the
maximum quarantine size (which is a fraction of installed physical
memory).

As long as an object remains in the quarantine, KASAN is able to report
accesses to it, so the chance of reporting a use-after-free is
increased.  Once the object leaves quarantine, the allocator may reuse
it, in which case the object is unpoisoned and KASAN can't detect
incorrect accesses to it.

Right now quarantine support is only enabled in SLAB allocator.
Unification of KASAN features in SLAB and SLUB will be done later.

This patch is based on the "mm: kasan: quarantine" patch originally
prepared by Dmitry Chernenkov.  A number of improvements have been
suggested by Andrey Ryabinin.

[glider@google.com: v9]
Link: http://lkml.kernel.org/r/1462987130-144092-1-git-send-email-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: call page_ext_init() after all struct pages are initialized

When DEFERRED_STRUCT_PAGE_INIT is enabled, just a subset of memmap at
boot are initialized, then the rest are initialized in parallel by
starting one-off "pgdatinitX" kernel thread for each node X.

If page_ext_init is called before it, some pages will not have valid
extension, this may lead the below kernel oops when booting up kernel:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff8118d982>] free_pcppages_bulk+0x2d2/0x8d0
  PGD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in:
  CPU: 11 PID: 106 Comm: pgdatinit1 Not tainted 4.6.0-rc5-next-20160427 #26
  Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009
  task: ffff88017c080040 ti: ffff88017c084000 task.ti: ffff88017c084000
  RIP: 0010:[<ffffffff8118d982>]  [<ffffffff8118d982>] free_pcppages_bulk+0x2d2/0x8d0
  RSP: 0000:ffff88017c087c48  EFLAGS: 00010046
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001
  RDX: 0000000000000980 RSI: 0000000000000080 RDI: 0000000000660401
  RBP: ffff88017c087cd0 R08: 0000000000000401 R09: 0000000000000009
  R10: ffff88017c080040 R11: 000000000000000a R12: 0000000000000400
  R13: ffffea0019810000 R14: ffffea0019810040 R15: ffff88066cfe6080
  FS:  0000000000000000(0000) GS:ffff88066cd40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000002406000 CR4: 00000000000006e0
  Call Trace:
    free_hot_cold_page+0x192/0x1d0
    __free_pages+0x5c/0x90
    __free_pages_boot_core+0x11a/0x14e
    deferred_free_range+0x50/0x62
    deferred_init_memmap+0x220/0x3c3
    kthread+0xf8/0x110
    ret_from_fork+0x22/0x40
  Code: 49 89 d4 48 c1 e0 06 49 01 c5 e9 de fe ff ff 4c 89 f7 44 89 4d b8 4c 89 45 c0 44 89 5d c8 48 89 4d d0 e8 62 c7 07 00 48 8b 4d d0 <48> 8b 00 44 8b 5d c8 4c 8b 45 c0 44 8b 4d b8 a8 02 0f 84 05 ff
  RIP  [<ffffffff8118d982>] free_pcppages_bulk+0x2d2/0x8d0
   RSP <ffff88017c087c48>
  CR2: 0000000000000000

Move page_ext_init() after page_alloc_init_late() to make sure page extension
is setup for all pages.

Link: http://lkml.kernel.org/r/1463696006-31360-1-git-send-email-yang.shi@linaro.org
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, migrate: increment fail count on ENOMEM

If page migration fails due to -ENOMEM, nr_failed should still be
incremented for proper statistics.

This was encountered recently when all page migration vmstats showed 0,
and inferred that migrate_pages() was never called, although in reality
the first page migration failed because compaction_alloc() failed to
find a migration target.

This patch increments nr_failed so the vmstat is properly accounted on
ENOMEM.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1605191510230.32658@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction.c: fix zoneindex in kcompactd()

While testing the kcompactd in my platform 3G MEM only DMA ZONE.  I
found the kcompactd never wakeup.  It seems the zoneindex has already
minus 1 before.  So the traverse here should be <=.

It fixes a regression where kswapd could previously compact, but
kcompactd not.  Not a crash fix though.

[akpm@linux-foundation.org: fix kcompactd_do_work() as well, per Hugh]
Link: http://lkml.kernel.org/r/1463659121-84124-1-git-send-email-puck.chen@hisilicon.com
Fixes: accf62422b3a ("mm, kswapd: replace kswapd compaction with waking up kcompactd")
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Yiping Xu <xuyiping@hisilicon.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_is_guard(): return false when page_ext arrays are not allocated yet

When enabling the below kernel configs:

CONFIG_DEFERRED_STRUCT_PAGE_INIT
CONFIG_DEBUG_PAGEALLOC
CONFIG_PAGE_EXTENSION
CONFIG_DEBUG_VM

kernel bootup may fail due to the following oops:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff8118d982>] free_pcppages_bulk+0x2d2/0x8d0
  PGD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in:
  CPU: 11 PID: 106 Comm: pgdatinit1 Not tainted 4.6.0-rc5-next-20160427 #26
  Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009
  task: ffff88017c080040 ti: ffff88017c084000 task.ti: ffff88017c084000
  RIP: 0010:[<ffffffff8118d982>]  [<ffffffff8118d982>] free_pcppages_bulk+0x2d2/0x8d0
  RSP: 0000:ffff88017c087c48  EFLAGS: 00010046
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001
  RDX: 0000000000000980 RSI: 0000000000000080 RDI: 0000000000660401
  RBP: ffff88017c087cd0 R08: 0000000000000401 R09: 0000000000000009
  R10: ffff88017c080040 R11: 000000000000000a R12: 0000000000000400
  R13: ffffea0019810000 R14: ffffea0019810040 R15: ffff88066cfe6080
  FS:  0000000000000000(0000) GS:ffff88066cd40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000002406000 CR4: 00000000000006e0
  Call Trace:
    free_hot_cold_page+0x192/0x1d0
    __free_pages+0x5c/0x90
    __free_pages_boot_core+0x11a/0x14e
    deferred_free_range+0x50/0x62
    deferred_init_memmap+0x220/0x3c3
    kthread+0xf8/0x110
    ret_from_fork+0x22/0x40
  Code: 49 89 d4 48 c1 e0 06 49 01 c5 e9 de fe ff ff 4c 89 f7 44 89 4d b8 4c 89 45 c0 44 89 5d c8 48 89 4d d0 e8 62 c7 07 00 48 8b 4d d0 <48> 8b 00 44 8b 5d c8 4c 8b 45 c0 44 8b 4d b8 a8 02 0f 84 05 ff
  RIP  [<ffffffff8118d982>] free_pcppages_bulk+0x2d2/0x8d0
   RSP <ffff88017c087c48>
  CR2: 0000000000000000

The problem is lookup_page_ext() returns NULL then page_is_guard() tried
to access it in page freeing.

page_is_guard() depends on PAGE_EXT_DEBUG_GUARD bit of page extension
flag, but freeing page might reach here before the page_ext arrays are
allocated when feeding a range of pages to the allocator for the first
time during bootup or memory hotplug.

When it returns NULL, page_is_guard() should just return false instead
of checking PAGE_EXT_DEBUG_GUARD unconditionally.

Link: http://lkml.kernel.org/r/1463610225-29060-1-git-send-email-yang.shi@linaro.org
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, thp: khugepaged should scan when sleep value is written

If a large value is written to scan_sleep_millisecs, for example, that
period must lapse before khugepaged will wake up for periodic
collapsing.

If this value is tuned to 1 day, for example, and then re-tuned to its
default 10s, khugepaged will still wait for a day before scanning again.

This patch causes khugepaged to wakeup immediately when the value is
changed and then sleep until that value is rewritten or the new value
lapses.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1605181453200.4786@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MM: increase safety margin provided by PF_LESS_THROTTLE

When nfsd is exporting a filesystem over NFS which is then NFS-mounted
on the local machine there is a risk of deadlock.  This happens when
there are lots of dirty pages in the NFS filesystem and they cause NFSD
to be throttled, either in throttle_vm_writeout() or in
balance_dirty_pages().

To avoid this problem the PF_LESS_THROTTLE flag is set for NFSD threads
and it provides a 25% increase to the limits that affect NFSD.  Any
process writing to an NFS filesystem will be throttled well before the
number of dirty NFS pages reaches the limit imposed on NFSD, so NFSD
will not deadlock on pages that it needs to write out.  At least it
shouldn't.

All processes are allowed a small excess margin to avoid performing too
many calculations: ratelimit_pages.

ratelimit_pages is set so that if a thread on every CPU uses the entire
margin, the total will only go 3% over the limit, and this is much less
than the 25% bonus that PF_LESS_THROTTLE provides, so this margin
shouldn't be a problem.  But it is.

The "total memory" that these 3% and 25% are calculated against are not
really total memory but are "global_dirtyable_memory()" which doesn't
include anonymous memory, just free memory and page-cache memory.

The "ratelimit_pages" number is based on whatever the
global_dirtyable_memory was on the last CPU hot-plug, which might not be
what you expect, but is probably close to the total freeable memory.

The throttle threshold uses the global_dirtable_memory at the moment
when the throttling happens, which could be much less than at the last
CPU hotplug.  So if lots of anonymous memory has been allocated, thus
pushing out lots of page-cache pages, then NFSD might end up being
throttled due to dirty NFS pages because the "25%" bonus it gets is
calculated against a rather small amount of dirtyable memory, while the
"3%" margin that other processes are allowed to dirty without penalty is
calculated against a much larger number.

To remove this possibility of deadlock we need to make sure that the
margin granted to PF_LESS_THROTTLE exceeds that rate-limit margin.
Simply adding ratelimit_pages isn't enough as that should be multiplied
by the number of cpus.

So add "global_wb_domain.dirty_limit / 32" as that more accurately
reflects the current total over-shoot margin.  This ensures that the
number of dirty NFS pages never gets so high that nfsd will be throttled
waiting for them to be written.

Link: http://lkml.kernel.org/r/87futgowwv.fsf@notabene.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: check_new_page_bad() directly returns in __PG_HWPOISON case

Currently we check page->flags twice for "HWPoisoned" case of
check_new_page_bad(), which can cause a race with unpoisoning.

This race unnecessarily taints kernel with "BUG: Bad page state".
check_new_page_bad() is the only caller of bad_page() which is
interested in __PG_HWPOISON, so let's move the hwpoison related code in
bad_page() to it.

Link: http://lkml.kernel.org/r/20160518100949.GA17299@hori1.linux.bs1.fc.nec.co.jp
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, kasan: fix to call kasan_free_pages() after poisoning page

When CONFIG_PAGE_POISONING and CONFIG_KASAN is enabled,
free_pages_prepare()'s codeflow is below.

  1)kmemcheck_free_shadow()
  2)kasan_free_pages()
    - set shadow byte of page is freed
  3)kernel_poison_pages()
  3.1) check access to page is valid or not using kasan
    ---> error occur, kasan think it is invalid access
  3.2) poison page
  4)kernel_map_pages()

So kasan_free_pages() should be called after poisoning the page.

Link: http://lkml.kernel.org/r/1463220405-7455-1-git-send-email-iamyooon@gmail.com
Signed-off-by: seokhoon.yoon <iamyooon@gmail.com>
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: disable fault around on emulated access bit architecture

fault_around aims to reduce minor faults of file-backed pages via
speculative ahead pte mapping and relying on readahead logic.  However,
on non-HW access bit architecture the benefit is highly limited because
they should emulate the young bit with minor faults for reclaim's page
aging algorithm.  IOW, we cannot reduce minor faults on those
architectures.

I did quick a test on my ARM machine.

512M file mmap sequential every word read on eSATA drive 4 times.
stddev is stable.

  = fault_around 4096 =
  elapsed time(usec): 6747645

  = fault_around 65536 =
  elapsed time(usec): 6709263

  0.5% gain.

Even when I tested it with eMMC there is no gain because I guess with
slow storage the major fault is the dominant factor.

Also, fault_around has the side effect of shrinking slab more
aggressively and causes higher vmpressure, so if such speculation fails,
it can evict slab more which can result in page I/O (e.g., inode cache).
In the end, it would make void any benefit of fault_around.

So let's make the default "disabled" on those architectures.

Link: http://lkml.kernel.org/r/20160518014229.GB21538@bbox
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make faultaround produce old ptes

Currently, faultaround code produces young pte.  This can screw up
vmscan behaviour[1], as it makes vmscan think that these pages are hot
and not push them out on first round.

During sparse file access faultaround gets more pages mapped and all of
them are young.  Under memory pressure, this makes vmscan swap out anon
pages instead, or to drop other page cache pages which otherwise stay
resident.

Modify faultaround to produce old ptes, so they can easily be reclaimed
under memory pressure.

This can to some extend defeat the purpose of faultaround on machines
without hardware accessed bit as it will not help us with reducing the
number of minor page faults.

We may want to disable faultaround on such machines altogether, but
that's subject for separate patchset.

Minchan:
 "I tested 512M mmap sequential word read test on non-HW access bit
  system (i.e., ARM) and confirmed it doesn't increase minor fault any
  more.

  old: 4096 fault_around
  minor fault: 131291
  elapsed time: 6747645 usec

  new: 65536 fault_around
  minor fault: 131291
  elapsed time: 6709263 usec

  0.56% benefit"

[1] https://lkml.kernel.org/r/1460992636-711-1-git-send-email-vinmenon@codeaurora.org

Link: http://lkml.kernel.org/r/1463488366-47723-1-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Tested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use phys_addr_t for reserve_bootmem_region() arguments

Since commit 92923ca3aace ("mm: meminit: only set page reserved in the
memblock region") the reserved bit is set on reserved memblock regions.
However start and end address are passed as unsigned long.  This is only
32bit on i386, so it can end up marking the wrong pages reserved for
ranges at 4GB and above.

This was observed on a 32bit Xen dom0 which was booted with initial
memory set to a value below 4G but allowing to balloon in memory
(dom0_mem=1024M for example).  This would define a reserved bootmem
region for the additional memory (for example on a 8GB system there was
a reverved region covering the 4GB-8GB range).  But since the addresses
were passed on as unsigned long, this was actually marking all pages
from 0 to 4GB as reserved.

Fixes: 92923ca3aacef63 ("mm: meminit: only set page reserved in the memblock region")
Link: http://lkml.kernel.org/r/1463491221-10573-1-git-send-email-stefan.bader@canonical.com
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: don't pin the user memory in userfaultfd_file_create()

userfaultfd_file_create() increments mm->mm_users; this means that the
memory won't be unmapped/freed if mm owner exits/execs, and UFFDIO_COPY
after that can populate the orphaned mm more.

Change userfaultfd_file_create() and userfaultfd_ctx_put() to use
mm->mm_count to pin mm_struct.  This means that
atomic_inc_not_zero(mm->mm_users) is needed when we are going to
actually play with this memory.  Except handle_userfault() path doesn't
need this, the caller must already have a reference.

The patch adds the new trivial helper, mmget_not_zero(), it can have
more users.

Link: http://lkml.kernel.org/r/20160516172254.GA8595@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memblock.c: remove unnecessary always-true comparison

Comparing an u64 variable to >= 0 returns always true and can therefore
be removed.  This issue was detected using the -Wtype-limits gcc flag.

This patch fixes following type-limits warning:

  mm/memblock.c: In function `__next_reserved_mem_region':
  mm/memblock.c:843:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
    if (*idx >= 0 && *idx < type->cnt) {

Link: http://lkml.kernel.org/r/20160510103625.3a7f8f32@g0hl1n.net
Signed-off-by: Richard Leitner <dev@g0hl1n.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

z3fold: the 3-fold allocator for compressed pages

This patch introduces z3fold, a special purpose allocator for storing
compressed pages.  It is designed to store up to three compressed pages
per physical page.  It is a ZBUD derivative which allows for higher
compression ratio keeping the simplicity and determinism of its
predecessor.

This patch comes as a follow-up to the discussions at the Embedded Linux
Conference in San-Diego related to the talk [1].  The outcome of these
discussions was that it would be good to have a compressed page
allocator as stable and deterministic as zbud with with higher
compression ratio.

To keep the determinism and simplicity, z3fold, just like zbud, always
stores an integral number of compressed pages per page, but it can store
up to 3 pages unlike zbud which can store at most 2.  Therefore the
compression ratio goes to around 2.6x while zbud's one is around 1.7x.

The patch is based on the latest linux.git tree.

This version has been updated after testing on various simulators (e.g.
ARM Versatile Express, MIPS Malta, x86_64/Haswell) and basing on
comments from Dan Streetman [3].

[1] https://openiotelc2016.sched.org/event/6DAC/swapping-and-embedded-compression-relieves-the-pressure-vitaly-wool-softprise-consulting-ou
[2] https://lkml.org/lkml/2016/4/21/799
[3] https://lkml.org/lkml/2016/5/4/852

Link: http://lkml.kernel.org/r/20160509151753.ec3f9fda3c9898d31ff52a32@gmail.com
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: split_huge_pmd_address() comment improvement

Comment is partly wrong, this improves it by including the case of
split_huge_pmd_address() called by try_to_unmap_one if TTU_SPLIT_HUGE_PMD
is set.

Link: http://lkml.kernel.org/r/1462547040-1737-4-git-send-email-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: microoptimize compound_mapcount()

compound_mapcount() is only called after PageCompound() has already been
checked by the caller, so there's no point to check it again.  Gcc may
optimize it away too because it's inline but this will remove the
runtime check for sure and add it'll add an assert instead.

Link: http://lkml.kernel.org/r/1462547040-1737-3-git-send-email-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmstat: get rid of the ugly cpu_stat_off variable

The cpu_stat_off variable is unecessary since we can check if a
workqueue request is pending otherwise.  Removal of cpu_stat_off makes
it pretty easy for the vmstat shepherd to ensure that the proper things
happen.

Removing the state also removes all races related to it.  Should a
workqueue not be scheduled as needed for vmstat_update then the shepherd
will notice and schedule it as needed.  Should a workqueue be
unecessarily scheduled then the vmstat updater will disable it.

[akpm@linux-foundation.org: fix indentation, per Michal]
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1605061306460.17934@east.gentwo.org
Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <htejun@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: fix stale mem_cgroup_force_empty() comment

Commit f61c42a7d911 ("memcg: remove tasks/children test from
mem_cgroup_force_empty()") removed memory reparenting from the function.

Fix the function's comment.

Link: http://lkml.kernel.org/r/1462569810-54496-1-git-send-email-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use unsigned long constant for page flags

struct page->flags is unsigned long, so when shifting bits we should use
UL suffix to match it.

Found this problem after I added 64-bit CPU specific page flags and
failed to compile the kernel:

  mm/page_alloc.c: In function '__free_one_page':
  mm/page_alloc.c:672:2: error: integer overflow in expression [-Werror=overflow]

Link: http://lkml.kernel.org/r/1461971723-16187-1-git-send-email-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use existing helper to convert "on"/"off" to boolean

It's more convenient to use existing function helper to convert string
"on/off" to boolean.

Link: http://lkml.kernel.org/r/1461908824-16129-1-git-send-email-mnghuan@gmail.com
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,writeback: don't use memory reserves for wb_start_writeback

When writeback operation cannot make forward progress because memory
allocation requests needed for doing I/O cannot be satisfied (e.g.
under OOM-livelock situation), we can observe flood of order-0 page
allocation failure messages caused by complete depletion of memory
reserves.

This is caused by unconditionally allocating "struct wb_writeback_work"
objects using GFP_ATOMIC from PF_MEMALLOC context.

__alloc_pages_nodemask() {
  __alloc_pages_slowpath() {
    __alloc_pages_direct_reclaim() {
      __perform_reclaim() {
        current->flags |= PF_MEMALLOC;
        try_to_free_pages() {
          do_try_to_free_pages() {
            wakeup_flusher_threads() {
              wb_start_writeback() {
                kzalloc(sizeof(*work), GFP_ATOMIC) {
                  /* ALLOC_NO_WATERMARKS via PF_MEMALLOC */
                }
              }
            }
          }
        }
        current->flags &= ~PF_MEMALLOC;
      }
    }
  }
}

Since I/O is stalling, allocating writeback requests forever shall
deplete memory reserves.  Fortunately, since wb_start_writeback() can
fall back to wb_wakeup() when allocating "struct wb_writeback_work"
failed, we don't need to allow wb_start_writeback() to use memory
reserves.

  Mem-Info:
  active_anon:289393 inactive_anon:2093 isolated_anon:29
   active_file:10838 inactive_file:113013 isolated_file:859
   unevictable:0 dirty:108531 writeback:5308 unstable:0
   slab_reclaimable:5526 slab_unreclaimable:7077
   mapped:9970 shmem:2159 pagetables:2387 bounce:0
   free:3042 free_pcp:0 free_cma:0
  Node 0 DMA free:6968kB min:44kB low:52kB high:64kB active_anon:6056kB inactive_anon:176kB active_file:712kB inactive_file:744kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15988kB managed:15904kB mlocked:0kB dirty:756kB writeback:0kB mapped:736kB shmem:184kB slab_reclaimable:48kB slab_unreclaimable:208kB kernel_stack:160kB pagetables:144kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:9708 all_unreclaimable? yes
  lowmem_reserve[]: 0 1732 1732 1732
  Node 0 DMA32 free:5200kB min:5200kB low:6500kB high:7800kB active_anon:1151516kB inactive_anon:8196kB active_file:42640kB inactive_file:451076kB unevictable:0kB isolated(anon):116kB isolated(file):3564kB present:2080640kB managed:1775332kB mlocked:0kB dirty:433368kB writeback:21232kB mapped:39144kB shmem:8452kB slab_reclaimable:22056kB slab_unreclaimable:28100kB kernel_stack:20976kB pagetables:9404kB unstable:0kB bounce:0kB free_pcp:120kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:2701604 all_unreclaimable? no
  lowmem_reserve[]: 0 0 0 0
  Node 0 DMA: 25*4kB (UME) 16*8kB (UME) 3*16kB (UE) 5*32kB (UME) 2*64kB (UM) 2*128kB (ME) 2*256kB (ME) 1*512kB (E) 1*1024kB (E) 2*2048kB (ME) 0*4096kB = 6964kB
  Node 0 DMA32: 925*4kB (UME) 140*8kB (UME) 5*16kB (ME) 5*32kB (M) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 5060kB
  Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
  Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
  126847 total pagecache pages
  0 pages in swap cache
  Swap cache stats: add 0, delete 0, find 0/0
  Free swap  = 0kB
  Total swap = 0kB
  524157 pages RAM
  0 pages HighMem/MovableOnly
  76348 pages reserved
  0 pages hwpoisoned
  Out of memory: Kill process 4450 (file_io.00) score 998 or sacrifice child
  Killed process 4450 (file_io.00) total-vm:4308kB, anon-rss:100kB, file-rss:1184kB, shmem-rss:0kB
  kthreadd: page allocation failure: order:0, mode:0x2200020
  file_io.00: page allocation failure: order:0, mode:0x2200020
  CPU: 0 PID: 4457 Comm: file_io.00 Not tainted 4.5.0-rc7+ #45
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
  Call Trace:
    warn_alloc_failed+0xf7/0x150
    __alloc_pages_nodemask+0x23f/0xa60
    alloc_pages_current+0x87/0x110
    new_slab+0x3a1/0x440
    ___slab_alloc+0x3cf/0x590
    __slab_alloc.isra.64+0x18/0x1d
    kmem_cache_alloc+0x11c/0x150
    wb_start_writeback+0x39/0x90
    wakeup_flusher_threads+0x7f/0xf0
    do_try_to_free_pages+0x1f9/0x410
    try_to_free_pages+0x94/0xc0
    __alloc_pages_nodemask+0x566/0xa60
    alloc_pages_current+0x87/0x110
    __page_cache_alloc+0xaf/0xc0
    pagecache_get_page+0x88/0x260
    grab_cache_page_write_begin+0x21/0x40
    xfs_vm_write_begin+0x2f/0xf0
    generic_perform_write+0xca/0x1c0
    xfs_file_buffered_aio_write+0xcc/0x1f0
    xfs_file_write_iter+0x84/0x140
    __vfs_write+0xc7/0x100
    vfs_write+0x9d/0x190
    SyS_write+0x50/0xc0
    entry_SYSCALL_64_fastpath+0x12/0x6a
  Mem-Info:
  active_anon:293335 inactive_anon:2093 isolated_anon:0
   active_file:10829 inactive_file:110045 isolated_file:32
   unevictable:0 dirty:109275 writeback:822 unstable:0
   slab_reclaimable:5489 slab_unreclaimable:10070
   mapped:9999 shmem:2159 pagetables:2420 bounce:0
   free:3 free_pcp:0 free_cma:0
  Node 0 DMA free:12kB min:44kB low:52kB high:64kB active_anon:6060kB inactive_anon:176kB active_file:708kB inactive_file:756kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15988kB managed:15904kB mlocked:0kB dirty:756kB writeback:0kB mapped:736kB shmem:184kB slab_reclaimable:48kB slab_unreclaimable:7160kB kernel_stack:160kB pagetables:144kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:9844 all_unreclaimable? yes
  lowmem_reserve[]: 0 1732 1732 1732
  Node 0 DMA32 free:0kB min:5200kB low:6500kB high:7800kB active_anon:1167280kB inactive_anon:8196kB active_file:42608kB inactive_file:439424kB unevictable:0kB isolated(anon):0kB isolated(file):128kB present:2080640kB managed:1775332kB mlocked:0kB dirty:436344kB writeback:3288kB mapped:39260kB shmem:8452kB slab_reclaimable:21908kB slab_unreclaimable:33120kB kernel_stack:20976kB pagetables:9536kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:11073180 all_unreclaimable? yes
  lowmem_reserve[]: 0 0 0 0
  Node 0 DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
  Node 0 DMA32: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
  Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
  Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
  123086 total pagecache pages
  0 pages in swap cache
  Swap cache stats: add 0, delete 0, find 0/0
  Free swap  = 0kB
  Total swap = 0kB
  524157 pages RAM
  0 pages HighMem/MovableOnly
  76348 pages reserved
  0 pages hwpoisoned
  SLUB: Unable to allocate memory on node -1 (gfp=0x2088020)
    cache: kmalloc-64, object size: 64, buffer size: 64, default order: 0, min order: 0
    node 0: slabs: 3218, objs: 205952, free: 0
  file_io.00: page allocation failure: order:0, mode:0x2200020
  CPU: 0 PID: 4457 Comm: file_io.00 Not tainted 4.5.0-rc7+ #45

Assuming that somebody will find a better solution, let's apply this
patch for now to stop bleeding, for this problem frequently prevents me
from testing OOM livelock condition.

Link: http://lkml.kernel.org/r/20160318131136.GE7152@quack.suse.cz
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>