arm64: dts: qcom: sm8150: Hard code rpmhpd constants

I missed the fact that these constants was not yet available, so hard
code their values in the dts to make the branch compile on its own.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: apq8096-db820c: Fix VDD core voltage

APQ8096 has its VDD APC (Power for quad Kryo applications
microprocessors) powered by PM8996 PMIC S9, S10, S11 tri-phase
regulators (gang). The bootloader may have configured these
regulators with non sustainable default values, leading to sporadic
hangs under CPU stress tests (cpufreq-bench). Ideally we should enable
voltage scaling along with frequency scaling, but for now just set the
regulator gang value to a sane voltage, capable of supporting highest
frequencies (turbo).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1578401755-26211-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode

vdd_apc is the regulator that supplies the main CPU cluster.

At sudden CPU load changes, we have noticed invalid page faults on
addresses with all bits shifted, as well as on addresses with individual
bits flipped.

By putting the vdd_apc regulator in high power mode, the voltage drops
during sudden load changes will be less severe, and we have not been able
to reproduce the invalid page faults with the regulator in this mode.

Fixes: 8faea8edbb35 ("arm64: dts: qcom: qcs404-evb: add spmi regulators")
Cc: stable@vger.kernel.org
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20191014120920.12691-1-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3

The msm_serial driver has a predefined set of uart ports defined, which
is allocated either by reading aliases or if no match is found a simple
counter, starting at index 0. But there's no logic in place to prevent
these two allocation mechanism from colliding. As a result either none
or all of the active msm_serial instances must be listed as aliases.

Define blsp1_uart3 as "serial1" to mitigate this problem.

Fixes: 4cffb9f2c700 ("arm64: dts: qcom: msm8998-mtp: Enable bluetooth")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191119011823.379100-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180

Added critical interrupt support in TSENS node and cooling maps in Thermal-zones node.

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
Link: https://lore.kernel.org/r/1578317369-16045-2-git-send-email-rkambl@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: Fix venus iommu nodename error

Fix the following error/warn seen with make dtbs_check

arm,smmu-venus@d40000: $nodename:0: 'arm,smmu-venus@d40000' does not match '^iommu@[0-9a-f]*'
arm,smmu-venus@d40000: clock-names:0: 'bus' was expected
arm,smmu-venus@d40000: clock-names:1: 'iface' was expected

by rename nodename to "iommu".

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Link: https://lore.kernel.org/r/20200106102305.27059-1-stanimir.varbanov@linaro.org
[bjorn: Added padding of address to 8 digits]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm845: add the ufs reset

Add the core UFS reset for sdm845

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200106070826.147064-4-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Fix UFS phy register size

UFS phy register space size is 0x1c0. so update it

Reported-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200106070826.147064-3-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset

Add the reset-gpio for UFS for sm8150-mtp.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200106070826.147064-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: qcs404: Add CPR and populate OPP table

Add CPR and populate OPP table.

Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20191129213917.1301110-4-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: qcs404: Add DVFS support

Support dynamic voltage and frequency scaling on qcs404.

CPUFreq will soon be superseded by Core Power Reduction (CPR, a form
of Adaptive Voltage Scaling found on some Qualcomm SoCs like the
qcs404).

Due to the CPR upstreaming already being in progress - and some
commits already merged -  the following commit will need to be
reverted to enable CPUFreq support

   Author: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
   Date:   Thu Jul 25 12:41:36 2019 +0200
       cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist

Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191125142511.681149-5-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider

Specify the clocks that feed the APCS mux/divider instead of using
default hardcoded values in the source code.

Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191125142511.681149-4-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: qcs404: Add HFPLL node

The high frequency pll functionality is required to enable CPU
frequency scaling operation.

Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191125142511.681149-3-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider

Specify the clocks that feed the APCS mux/divider instead of using
default hardcoded values in the source code.

The driver still supports the previous bindings; however with this
update it we allow the msm8916 to access the parent clock names
required by the driver operation using the device tree node.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191125142511.681149-2-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add rpmh power-domain node

Add the DT node for the rpmhpd power controller on SC7180 SoCs.

Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20191220064823.6115-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids

Add the SPMI regulator node in the PM8004 LSID5 (as there is where
it resides basically 99% of the times) and set the nodes to be
disabled by default, as not all boards have both or one of the
lsids specified in this generic pm8004 DT.

While at it, also add nice phandles to the lsids specified in this
DT to allow configuration in specific board dts in a more human
readable fashion.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20191031111645.34777-3-kholk11@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: msm8998: thermal: Add critical interrupt support

Register critical interrupts for each of the two tsens controllers

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/3ef309a98ca6445c1982ec3ff1a70db39b18f415.1575349416.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: msm8996: thermal: Add critical interrupt support

Register critical interrupts for each of the two tsens controllers

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/53d8f7b922ec889ed11380896c2a367ae0998db2.1575349416.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845

The redistributable firmware should work on any engineering device, so
lets push this to qcom/sdm845, rather than qcom/db845c. Also specify the
path for the modem firmware.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191113203951.3704428-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: Introduce IFC6640

Introduce a base dts for the Inforce 6640 Single Board Computer. This
initial commit boots to console on the uart and provides UFS and SD card
storage support.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: db820c: Use regulator names from schematics

Update the regulator names in db820c.dtsi to use the names from the
schematics, instead of the made up genric names.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: Sort all nodes in msm8996.dtsi

Sort all the nodes by unit address, then name.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: Pad addresses

Pad all addresses in msm8996.dtsi to 8 digits, in order to make it
easier to ensure ordering when adding new nodes.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: db820c: Remove pin specific files

Rather than scattering pinctrl definitions in various files, merge the
nodes into db820c.dtsi to make it easier to navigate.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: db820c: Sort all nodes

Sort all nodes in db820c.dtsi based on address, then name.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: db820c: Group root nodes

Prior refactoring have left a few root nodes scattered throughout
db820c.dtsi, group these at the top of the file.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: Move regulators to db820c

As the definition of available PMICs and the names of their outputs are
board specifc move this to db820c.dtsi

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: Move regulator consumers to db820c

Supplies for the various components in the SoC depends on board layout,
so move the supply definitions to db820c.dtsi instead of carrying them
in the platform dtsi.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: Use node references in db820c

Instead of mimicing the structure of the platform, reference nodes by
their label in apq8096-db820c.dtsi. Add labels in msm8996.dtsi where
necessary.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: db820c: Move non-soc entries out of /soc

The USB id pins and wlan regulator are not platform devices, so move
them out of /soc

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk

The WiFi firmware used on db845c implements the 8bit host-capability
message, so enable the quirk for this.

Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191113232245.4039932-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm845: Rename gic-its node to msi-controller

This is just like commit ac00546a6780 ("arm64: dts: qcom: sc7180:
Rename gic-its node to msi-controller") but for sdm845.  This fixes
all arm64/qcom device trees that I could find.

Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191216222021.1.I684f124a05a1c3f0b113c8d06d5f9da5d69b801e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodes

This patch adds ADSP, MPSS and SLPI nodes for MSM8998 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20191218132217.28141-6-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8998: Update reserved memory map

Update existing and add missing regions to the reserved memory map, as
described in version 7.1

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20191218132217.28141-5-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add remoteproc enablers

Add scm, smem, smp2p, aoss-qmp, aoss-cc and pdc-global device nodes
to SC7180 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20191218143332.29107-1-sibis@codeaurora.org
[bjorn: Updated subject]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Add cpufreq HW device node

Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+ cores
on SM8150 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20191219120633.20723-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: qcs404: Update the compatible for watchdog timer

Update the compatible for QCS404 watchdog timer with proper
SoC specific compatible.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/757995875cc12d3f5a8f5fd5659b04653950970a.1576211720.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Fix I2C/UART numbers 2, 4, 7, and 9

Commit f4a73f5e2633 ("pinctrl: qcom: sc7180: Add new qup functions")
has landed which means that we absolutely need to use the proper names
for the pinmuxing for I2C/UART numbers 2, 4, 7, and 9.  Let's do it.

For reference:
- If you get only one of this commit and the pinctrl commit then none
  of I2C/UART 2, 4, 7, and 9 will work.
- If you get neither of these commits then I2C 2, 4, 7, and 9 will
  work but not UART.

...but despite the above it should be fine for this commit to land in
the Qualcomm tree because sc7180.dtsi only exists there (it hasn't
made it to mainline).

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Fixes: ba3fc6496366 ("arm64: dts: sc7180: Add qupv3_0 and qupv3_1")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191217130352.1.Id8562de45e8441cac34699047e25e7424281e9d4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: msm8998-clamshell: Add pm8005_s1 regulator

The pm8005_s1 is VDD_GFX, and needs to be on to enable the GPU.
This should be hooked up to the GPU CPR, but we don't have support for that
yet, so until then, just turn on the regulator and keep it on so that we
can focus on basic GPU bringup.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191217170249.5280-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add wakeup parent for TLMM

Specify wakeup parent irqchip for sc7180 TLMM.

Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1572419178-5750-3-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI remoteprocs

Add ADSP, CDSP, MPSS and SLPI device tree nodes for SM8150 SoC.

Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20191217092503.10699-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Fix node order

The SC7180 device tree nodes should be ordered by address. Re-shuffle
some nodes which currently don't follow this convention.

Since we are already moving it add a missing leading zero to the
address in the 'reg' property of the 'interrupt-controller@b220000'
node.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191212170824.v2.1.I55198466344789267ed1eb5ec555fd890c9fc6e1@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8998: Fixup uart3 gpio config for bluetooth

It turns out that the wcn3990 can float the gpio lines during bootup, etc
which will result in the uart core thinking there is incoming data.  This
results in the bluetooth stack getting garbage.  By applying a bias to
match what wcn3990 would drive, the issue is corrected.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191021161921.31825-1-jeffrey.l.hugo@gmail.com
[bjorn: Moved board specific pinctrl states to the end]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm845-cheza: Add cr50 spi node

Add the cr50 device to the spi controller it is attached to. This
enables /dev/tpm0 and some login things on Cheza.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191216234204.190769-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI smp2p

Add the SMP2P nodes for the remoteproc states for ADSP, CDSP, MPSS and
SLPI remoteprocs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/0101016e80793dfa-9d0f6e93-01db-4c95-a226-d64bb50238cb-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Avoid "phy" for USB QMP PHY wrapper

The bindings for the QMP PHY are truly strange.  I believe (?) that
they may have originated because with PCIe each lane is treated as a
different PHY and the same PHY driver is used for a whole bunch of
things (incluidng PCIe).

In any case, now that we have "make dtbs_check", we find that having
the outer node named "phy" triggers the
"schemas/phy/phy-provider.yaml" schema, yelling about:

  phy@88e9000: '#phy-cells' is a required property

Let's call the outer node the "phy-wrapper" and the inner node the
"phy" to make dtbs_check happy.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191212113540.6.Iec10b23bb000186b36b8bacfb6789d8233de04a7@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm6150: Remove macro from unit name of adc-chan

This is just like commit e77cc85ee390 ("arm64: dts: qcom: sdm845:
remove macro from unit name").  It fixes the error in 'make
dtbs_check':

arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: adc@3100: 'adc-chan@0x06' does not match any of the regexes: ...

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: a727ec1232d9 ("arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191212113540.4.I5f67a5ed7665f658c95447a837cbd0021e1dc689@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add "#clock-cells" property to usb_1_ssphy

Running "dtbs_check" yells:
  '#clock-cells' is a dependency of 'clock-output-names'

...and sure enough the bindings say we should have "#clock-cells".
Add it.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191212113540.3.Ia530e4065ca81f55ac8f89a400f6a0a084ff6712@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Rename gic-its node to msi-controller

Running `make dtbs_check` yells:

  arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: interrupt-controller@17a00000: gic-its@17a40000: False schema

From "arm,gic-v3.yaml" we can grok that this is explained by the
comment "msi-controller is preferred".  Switch to the preferred name
so that dtbs_check stops yelling.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 90db71e48070 ("arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191212113540.2.Ibad7d3b0bea02957e89047942c61cc6c0aa61715@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add SoC name to compatible

Running `make dtbs_check` yells because qcom.yaml says that we should
have:

- items:
    - enum:
        - qcom,sc7180-idp
    - const: qcom,sc7180

...but we're missing "qcom,sc7180".  Add it.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 90db71e48070 ("arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191212113540.1.I158061c65974bf0f653ceb79b442b76a1fd64868@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sm8150: Add rpmh power-domain node

Add the DT node for the rpmhpd power controller.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/0101016e7f99eab9-35efa01f-8ed3-4a77-87e1-09c381173121-000000@us-west-2.amazonses.com
[bjorn: Use constant for opp6, until include lands]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sc7180: Add aliases for all i2c and spi devices

Add aliases for all i2c and spi nodes

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ef3cded0a-f85e1f98-f3be-4f6f-805f-82f8b6a83e14-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sc7180: Remove additional spi chip select muxes

remove the additional CS muxes that were added by default for
spi so every board using sc7180 does not have to override it.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ef3cdad4a-cbfbc482-1f74-4cb7-88fc-b4b6ed7e7543-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm: dts: qcom: db410c: Enable USB OTG support

The Dragonboard-410c is able to act either as USB Host or Device.
The role can be determined at runtime via the USB_HS_ID pin which is
derived from the micro-usb port VBUS pin.

In Host role, SoC USB D+/D- are routed to the onboard USB 2.0 HUB.
In Device role, SoC USB D+/D- are routed to the USB 2.0 micro B port.
Routing is selected via USB_SW_SEL_PM gpio.

In device role USB HUB can be held in reset.

chipidea driver expects two extcon device pointers, one for the
EXTCON_USB event and one for the EXTCON_USB_HOST event. Since
the extcon-usb-gpio device is capable of generating both these
events, point two times to this extcon device.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1576083014-5842-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm8916: Add vibration motor node

PM8916 has one vibration motor driver that is already supported
by the pm8xxx-vibrator driver.

Add a node describing it to pm8916.dtsi.
Keep it disabled by default since not all devices make use of it.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191211192906.56638-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add USB related nodes

Add nodes for DWC3 USB controller, QMP and QUSB PHYs.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573795421-13989-2-git-send-email-sanm@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180

Add TSENS node and user thermal zone for TSENS sensors in SC7180.

Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
Link: https://lore.kernel.org/r/1574934847-30372-2-git-send-email-rkambl@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8998: Add gpucc node

Add MSM8998 GPU Clock Controller DT node.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191031185806.15602-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150-mtp: Enable UFS nodes

Enable the UFS HC and phy nodes and add regulators used by these.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20191106084656.1749954-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Add ufs nodes

Add the ufs hc node and ufs phy nodes found in SM8150

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20191106084656.1749954-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Use gcc clock enums

Now that header defining gcc clocks is upstream, use the enums instead
of numbers

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20191106084604.1746544-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sc7180: Add cpufreq HW node for cpu scaling

cpufreq hw node required to scale CPU frequency on sc7180.

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ed02b6356-5165eaaa-6c54-47ff-a008-821c91831e56-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

QUSB2 PHY on msm8996 doesn't work well when autosuspend by
dwc3 core using USB2PHYCFG register is enabled. One of the
issue seen is that PHY driver reports PLL lock failure and
fails phy_init() if dwc3 core has USB2 PHY suspend enabled.
Fix this by using quirks to disable USB2 PHY LPM/suspend and
dwc3 core already takes care of explicitly suspending PHY
during suspend if quirks are specified.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Link: https://lore.kernel.org/r/20191209151501.26993-1-p.pisati@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add Last level cache controller node

Add device tree node for LLCC aka system cache controller for
SC7180 SoC.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ef3394291-2290a8be-91c9-4d46-b5ca-acd5277eb6e2-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Add APSS watchdog node

Add APSS (Application Processor Subsystem) watchdog
DT node for SM8150 SoC.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ef3393092-487ddf4a-2e17-40f0-8161-3e686a7b57dc-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add APSS watchdog node

Add APSS (Application Processor Subsystem) watchdog
DT node for SC7180 SoC.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ef3391ce3-438cca2f-458c-47d9-a62a-381f1c6bfb15-000000@us-west-2.amazonses.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sdm845: Update the device tree node for LLCC

LLCC cache-controller was renamed to system-cache-controller
to make schema pass the dt binding check. Update the device
tree node to reflect this change.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/a2bb92de65e90768bf1d6b8c0b7fbd43cba704d2.1573814758.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sc7180: Add a comment to i2c7 about external pullup

Make i2c7 symmetric with the other i2c busses and comment that we have
no internal pull because there is an external one.

Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Fixes: ba3fc6496366 ("arm64: dts: sc7180: Add qupv3_0 and qupv3_1")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191210163530.2.I8d4cbb3d7ac5824f8e950c53038df8c27a512905@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sc7180: Fix indentation/ordering of qspi nodes in sc7180-idp

The qspi pinctrl nodes had the wrong indentation and sort ordering and
the main qspi node was placed down in the pinctrl section.  Fix.

Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Fixes: ba3fc6496366 ("arm64: dts: sc7180: Add qupv3_0 and qupv3_1")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191210163530.1.I69a6c29e08924229d160b651769c84508a07b3c6@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: msm8916: thermal: Add interrupt support

Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/88eff964b708c8aff57b24370d2e14389ace09e9.1572526427.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845

PDC always-on interrupt controller can detect certain GPIOs even when
the TLMM interrupt controller is powered off. Link the PDC as TLMM's
wakeup parent.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-12-git-send-email-ilina@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: add PDC interrupt controller for SDM845

Add PDC interrupt controller device bindings for SDM845.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-11-git-send-email-ilina@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8998: Fix tcsr syscon size

The tcsr syscon region is really 0x40000 in size.  We need access to the
full region so that we can access the axi resets when managing the
modem subsystem.

Fixes: c7833949564e ("arm64: dts: qcom: msm8998: Add smem related nodes")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191107045948.4341-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8998: Add wifi node

Add the wifi node and required reserved memory to enable the wlan
hardware.  Enable the wifi node in both the mtp and clamshell platforms
after adding the relevant regulators for each platform.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191107043313.4055-3-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8998: Add anoc2 smmu node

While there are several peripherals on the anoc2, most are not behind the
smmu.  However, the SoC integrated wlan block is behind the smmu, so we'll
need to control the smmu inorder to enable wifi.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191107043313.4055-2-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sc7180: Add qupv3_0 and qupv3_1

Add QUP SE instances configuration for sc7180.

Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-14-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver

Add node for rpmhcc clock driver.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-13-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180-idp: Add RPMh regulators

Add the rpmh regulators for the sc7180 idp platform. This platform
consists of PMIC PM6150 and PM6150l

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/20191108092824.9773-12-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals

Add PM6150/PM6150L peripherals such as PON, GPIOs, ADC and other
PMIC infra modules.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-11-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device

Add SPMI PMIC arbiter device to communicate with PMICs
attached to SPMI bus.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-10-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add pdc interrupt controller

Add pdc interrupt controller for sc7180

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-9-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add rpmh-rsc node

Add device bindings for the application processor's rsc. The rsc
contains the TCS that are used for communicating with the hardened
resource accelerators on Qualcomm Technologies, Inc. (QTI) SoCs.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-6-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add cmd_db reserved area

Command_db provides mapping for resource key and address managed
by remote processor. Add cmd_db reserved memory area.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-5-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sc7180: Add device node for apps_smmu

Adding device node for APPS SMMU that is connected to
devices such as display, video, usb, mmc, etc. on SC7180
chipset.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-4-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc

Add skeletal sc7180 SoC dtsi and idp board dts files.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Co-developed-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/20191108092824.9773-3-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: qcom: Add SC7180 bindings

Add a SoC string 'sc7180' for the qualcomm SC7180 SoC.
Also add a new board type 'idp'

While at it, also sort the SoC and board names in
alphabetical order, and also fix the weird space
and tab combinations found in the file.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191108092824.9773-2-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: sdm845: thermal: Add critical interrupt support

Register critical interrupts for each of the two tsens controllers

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/c536e9cdb448bbad3441f6580fa57f1f921fb580.1573499020.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Linux 5.5-rc1

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) More jumbo frame fixes in r8169, from Heiner Kallweit.

 2) Fix bpf build in minimal configuration, from Alexei Starovoitov.

 3) Use after free in slcan driver, from Jouni Hogander.

 4) Flower classifier port ranges don't work properly in the HW offload
    case, from Yoshiki Komachi.

 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.

 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.

 7) Fix flow dissection in dsa TX path, from Alexander Lobakin.

 8) Stale syncookie timestampe fixes from Guillaume Nault.

[ Did an evil merge to silence a warning introduced by this pull - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  r8169: fix rtl_hw_jumbo_disable for RTL8168evl
  net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
  r8169: add missing RX enabling for WoL on RTL8125
  vhost/vsock: accept only packets with the right dst_cid
  net: phy: dp83867: fix hfs boot in rgmii mode
  net: ethernet: ti: cpsw: fix extra rx interrupt
  inet: protect against too small mtu values.
  gre: refetch erspan header from skb->data after pskb_may_pull()
  pppoe: remove redundant BUG_ON() check in pppoe_pernet
  tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
  tcp: tighten acceptance of ACKs not matching a child socket
  tcp: fix rejected syncookies due to stale timestamps
  lpc_eth: kernel BUG on remove
  tcp: md5: fix potential overestimation of TCP option space
  net: sched: allow indirect blocks to bind to clsact in TC
  net: core: rename indirect block ingress cb function
  net-sysfs: Call dev_hold always in netdev_queue_add_kobject
  net: dsa: fix flow dissection on Tx path
  net/tls: Fix return values to avoid ENOTSUPP
  net: avoid an indirect call in ____sys_recvmsg()
  ...

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "Eleven patches, all in drivers (no core changes) that are either minor
  cleanups or small fixes.

  They were late arriving, but still safe for -rc1"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
  scsi: megaraid_sas: Make poll_aen_lock static
  scsi: sd_zbc: Improve report zones error printout
  scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
  scsi: qla2xxx: unregister ports after GPN_FT failure
  scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
  scsi: pm80xx: Remove unused include of linux/version.h
  scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
  scsi: scsi_transport_sas: Fix memory leak when removing devices
  scsi: lpfc: size cpu map by last cpu id set
  scsi: ibmvscsi_tgt: Remove unneeded variable rc

Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Nine cifs/smb3 fixes:

   - one fix for stable (oops during oplock break)

   - two timestamp fixes including important one for updating mtime at
     close to avoid stale metadata caching issue on dirty files (also
     improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
     wire)

   - two fixes for "modefromsid" mount option for file create (now
     allows mode bits to be set more atomically and accurately on create
     by adding "sd_context" on create when modefromsid specified on
     mount)

   - two fixes for multichannel found in testing this week against
     different servers

   - two small cleanup patches"

* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: improve check for when we send the security descriptor context on create
  smb3: fix mode passed in on create for modetosid mount option
  cifs: fix possible uninitialized access and race on iface_list
  cifs: Fix lookup of SMB connections on multichannel
  smb3: query attributes on file close
  smb3: remove unused flag passed into close functions
  cifs: remove redundant assignment to pointer pneg_ctxt
  fs: cifs: Fix atime update check vs mtime
  CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks

Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs

Pull misc vfs cleanups from Al Viro:
 "No common topic, just three cleanups".

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make __d_alloc() static
  fs/namespace: add __user to open_tree and move_mount syscalls
  fs/fnctl: fix missing __user in fcntl_rw_hint()

Merge tag 'ntb-5.5' of git://github.com/jonmason/ntb

Pull NTB update from Jon Mason:
 "Just a simple patch to add a new Hygon Device ID to the AMD NTB device
  driver"

* tag 'ntb-5.5' of git://github.com/jonmason/ntb:
  NTB: Add Hygon Device ID

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:

 - fixups for Synaptics RMI4 driver

 - a quirk for Goodinx touchscreen on Teclast tablet

 - a new keycode definition for activating privacy screen feature found
   on a few "enterprise" laptops

 - updates to snvs_pwrkey driver

 - polling uinput device for writing (which is always allowed) now works

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
  Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
  Input: goodix - add upside-down quirk for Teclast X89 tablet
  Input: add privacy screen toggle keycode
  Input: uinput - fix returning EPOLLOUT from uinput_poll
  Input: snvs_pwrkey - remove gratuitous NULL initializers
  Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q

Merge tag 'iomap-5.5-merge-14' of git://git./fs/xfs/xfs-linux

Pull iomap fixes from Darrick Wong:
 "Fix a race condition and a use-after-free error:

   - Fix a UAF when reporting writeback errors

   - Fix a race condition when handling page uptodate on fragmented file
     with blocksize < pagesize"

* tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: stop using ioend after it's been freed in iomap_finish_ioend()
  iomap: fix sub-page uptodate handling

Merge tag 'xfs-5.5-merge-17' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "Fix a couple of resource management errors and a hang:

   - fix a crash in the log setup code when log mounting fails

   - fix a hang when allocating space on the realtime device

   - fix a block leak when freeing space on the realtime device"

* tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix mount failure crash on invalid iclog memory access
  xfs: don't check for AG deadlock for realtime files in bunmapi
  xfs: fix realtime file data space leak

Merge tag 'for-linus-5.5-ofs1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs update from Mike Marshall:
 "orangefs: posix open permission checking...

  Orangefs has no open, and orangefs checks file permissions on each
  file access. Posix requires that file permissions be checked on open
  and nowhere else. Orangefs-through-the-kernel needs to seem posix
  compliant.

  The VFS opens files, even if the filesystem provides no method. We can
  see if a file was successfully opened for read and or for write by
  looking at file->f_mode.

  When writes are flowing from the page cache, file is no longer
  available. We can trust the VFS to have checked file->f_mode before
  writing to the page cache.

  The mode of a file might change between when it is opened and IO
  commences, or it might be created with an arbitrary mode.

  We'll make sure we don't hit EACCES during the IO stage by using
  UID 0"

[ This is "posixish", but not a great solution in the long run, since a
  proper secure network server shouldn't really trust the client like this.
  But proper and secure POSIX behavior requires an open method and a
  resulting cookie for IO of some kind, or similar.    - Linus ]

* tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: posix open permission checking...

Merge tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "This is a relatively quiet cycle for nfsd, mainly various bugfixes.

  Possibly most interesting is Trond's fixes for some callback races
  that were due to my incomplete understanding of rpc client shutdown.
  Unfortunately at the last minute I've started noticing a new
  intermittent failure to send callbacks. As the logic seems basically
  correct, I'm leaving Trond's patches in for now, and hope to find a
  fix in the next week so I don't have to revert those patches"

* tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits)
  nfsd: depend on CRYPTO_MD5 for legacy client tracking
  NFSD fixing possible null pointer derefering in copy offload
  nfsd: check for EBUSY from vfs_rmdir/vfs_unink.
  nfsd: Ensure CLONE persists data and metadata changes to the target file
  SUNRPC: Fix backchannel latency metrics
  nfsd: restore NFSv3 ACL support
  nfsd: v4 support requires CRYPTO_SHA256
  nfsd: Fix cld_net->cn_tfm initialization
  lockd: remove __KERNEL__ ifdefs
  sunrpc: remove __KERNEL__ ifdefs
  race in exportfs_decode_fh()
  nfsd: Drop LIST_HEAD where the variable it declares is never used.
  nfsd: document callback_wq serialization of callback code
  nfsd: mark cb path down on unknown errors
  nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback()
  nfsd: minor 4.1 callback cleanup
  SUNRPC: Fix svcauth_gss_proxy_init()
  SUNRPC: Trace gssproxy upcall results
  sunrpc: fix crash when cache_head become valid before update
  nfsd: remove private bin2hex implementation
  ...

Merge tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Features:

   - NFSv4.2 now supports cross device offloaded copy (i.e. offloaded
     copy of a file from one source server to a different target
     server).

   - New RDMA tracepoints for debugging congestion control and Local
     Invalidate WRs.

  Bugfixes and cleanups

   - Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for
     layoutreturn

   - Handle bad/dead sessions correctly in nfs41_sequence_process()

   - Various bugfixes to the delegation return operation.

   - Various bugfixes pertaining to delegations that have been revoked.

   - Cleanups to the NFS timespec code to avoid unnecessary conversions
     between timespec and timespec64.

   - Fix unstable RDMA connections after a reconnect

   - Close race between waking an RDMA sender and posting a receive

   - Wake pending RDMA tasks if connection fails

   - Fix MR list corruption, and clean up MR usage

   - Fix another RPCSEC_GSS issue with MIC buffer space"

* tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  SUNRPC: Capture completion of all RPC tasks
  SUNRPC: Fix another issue with MIC buffer space
  NFS4: Trace lock reclaims
  NFS4: Trace state recovery operation
  NFSv4.2 fix memory leak in nfs42_ssc_open
  NFSv4.2 fix kfree in __nfs42_copy_file_range
  NFS: remove duplicated include from nfs4file.c
  NFSv4: Make _nfs42_proc_copy_notify() static
  NFS: Fallocate should use the nfs4_fattr_bitmap
  NFS: Return -ETXTBSY when attempting to write to a swapfile
  fs: nfs: sysfs: Remove NULL check before kfree
  NFS: remove unneeded semicolon
  NFSv4: add declaration of current_stateid
  NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn
  NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()
  nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list
  SUNRPC: Avoid RPC delays when exiting suspend
  NFS: Add a tracepoint in nfs_fh_to_dentry()
  NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done()
  NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn
  ...

smb3: improve check for when we send the security descriptor context on create

We had cases in the previous patch where we were sending the security
descriptor context on SMB3 open (file create) in cases when we hadn't
mounted with with "modefromsid" mount option.

Add check for that mount flag before calling ad_sd_context in
open init.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>