ALSA: hda: Match only Intel devices with CONTROLLER_IN_GPU()

[ Upstream commit ff447886e675979d66b2bc01810035d3baea1b3a ]

CONTROLLER_IN_GPU() is clearly intended to match only Intel devices, but
previously it checked only the PCI Device ID, not the Vendor ID, so it
could match devices from other vendors that happened to use the same Device
ID.

Update CONTROLLER_IN_GPU() so it matches only Intel devices.

Fixes: 535115b5ff51 ("ALSA: hda - Abort the probe without i915 binding for HSW/B")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307214054.886721-1-helgaas@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Fix expander node leak in mpi3mr_remove()

[ Upstream commit ce756daa36e1ba271bb3334267295e447aa57a5c ]

Add a missing resource clean up in .remove.

Fixes: e22bae30667a ("scsi: mpi3mr: Add expander devices to STL")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-7-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt

[ Upstream commit 02ca7da2919ada525fb424640205110e24646b50 ]

As part of Task Management handling, the driver will disable and enable the
MSIx index zero which belongs to the Admin reply queue. During this
transition the driver loses some interrupts and this leads to Admin request
and ioctl timeouts.

After enabling the interrupts, poll the Admin reply queue to avoid
timeouts.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230228140835.4075-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: ce756daa36e1 ("scsi: mpi3mr: Fix expander node leak in mpi3mr_remove()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc()

[ Upstream commit c798304470cab88723d895726d17fcb96472e0e9 ]

Don't allocate memory again when IOC is being reinitialized.

Fixes: fe6db6151565 ("scsi: mpi3mr: Handle offline FW activation in graceful manner")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-6-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Return proper values for failures in firmware init path

[ Upstream commit ba8a9ba41fbde250fd8b0ed1e5dad0dc9318df46 ]

Return proper non-zero return values for all the cases when the controller
initialization and re-initialization fails.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230228140835.4075-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: c798304470ca ("scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Fix sas_hba.phy memory leak in mpi3mr_remove()

[ Upstream commit d4caa1a4255cc44be56bcab3db2c97c632e6cc10 ]

Free mrioc->sas_hba.phy at .remove.

Fixes: 42fc9fee116f ("scsi: mpi3mr: Add helper functions to manage device's port")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-5-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove()

[ Upstream commit d0f3c3728da8af76dfe435f7f0cfa2b9d9e43ef0 ]

Free mpi3mr_hba_port at .remove.

Fixes: 42fc9fee116f ("scsi: mpi3mr: Add helper functions to manage device's port")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-4-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Fix config page DMA memory leak

[ Upstream commit 7d2b02172b6a2ae6aecd7ef6480b9c4bf3dc59f4 ]

A fix for:

DMA-API: pci 0000:83:00.0: device driver has pending DMA allocations while released from device [count=1]

Fixes: 32d457d5a2af ("scsi: mpi3mr: Add framework to issue config requests")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-3-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Fix throttle_groups memory leak

[ Upstream commit f305a7b6ca21a665e8d0cf70b5936991a298c93c ]

Add a missing kfree().

Fixes: f10af057325c ("scsi: mpi3mr: Resource Based Metering")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-2-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()

[ Upstream commit d3c57724f1569311e4b81e98fad0931028b9bdcd ]

Port is allocated by sas_port_alloc_num() and rphy is allocated by either
sas_end_device_alloc() or sas_expander_alloc(), all of which may return
NULL. So we need to check the rphy to avoid possible NULL pointer access.

If sas_rphy_add() returned with failure, rphy is set to NULL. We would
access the rphy in the following lines which would also result NULL pointer
access.

Fixes: 78316e9dfc24 ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()")
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

docs: Correct missing "d_" prefix for dentry_operations member d_weak_revalidate

[ Upstream commit 74596085796fae0cfce3e42ee46bf4f8acbdac55 ]

The details for struct dentry_operations member d_weak_revalidate is
missing a "d_" prefix.

Fixes: af96c1e304f7 ("docs: filesystems: vfs: Convert vfs.txt to RST")
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230227184042.2375235-1-development@efficientek.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc4-topology: set dmic dai index from copier

[ Upstream commit c99e48f4ce9b986ab7992ec7283a06dae875f668 ]

Dmic dai index was set incorrectly to bits 5-7, when it is actually using
just the lowest 3. Fix the macro for setting the bits.

Fixes: aa84ffb72158 ("ASoC: SOF: ipc4-topology: Add support for SSP/DMIC DAI's")
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110730.1995-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASOC: SOF: Intel: pci-tgl: Fix device description

[ Upstream commit 376f79bbf521fc37b871b536276319951b5bef3a ]

Add the missing ops_free callback.

Fixes: 63d375b9f2a9 ("ASoC: SOF: Intel: pci-tgl: use RPL specific firmware definitions")

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307093914.25409-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: SKL: Fix device description

[ Upstream commit 1f320bdb29b644a2c9fb301a6fb2d6170e6417e9 ]

Add missing ops_free callback for SKL/KBL platforms.

Fixes: 52d7939d10f2 ("ASoC: SOF: Intel: add ops for SKL/KBL")

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307093914.25409-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: HDA: Fix device description

[ Upstream commit 9eb2b4cac223095d2079a6d52b8bbddc6e064288 ]

Add the missing ops_free callback for APL/CNL/CML/JSL/TGL/EHL platforms.

Fixes: 1da51943725f ("ASoC: SOF: Intel: hda: init NHLT for IPC4")

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307093914.25409-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: MTL: Fix the device description

[ Upstream commit a659e35ca0af2765f567bdfdccfa247eff0cdab8 ]

Add the missing ops_free callback.

Fixes: 064520e8aeaa ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307093914.25409-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: HI655X: select REGMAP instead of depending on it

[ Upstream commit 0ffad67784a097beccf34d297ddd1b0773b3b8a3 ]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: 3a49afb84ca0 ("clk: enable hi655x common clk automatically")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Riku Voipio <riku.voipio@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-3-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: fix 1px pink line on GXM when scaling video overlay

[ Upstream commit 5c8cf1664f288098a971a1d1e65716a2b6a279e1 ]

Playing media with a resolution smaller than the crtc size requires the
video overlay to be scaled for output and GXM boards display a 1px pink
line on the bottom of the scaled overlay. Comparing with the downstream
vendor driver revealed VPP_DUMMY_DATA not being set [0].

Setting VPP_DUMMY_DATA prevents the 1px pink line from being seen.

[0] https://github.com/endlessm/linux-s905x/blob/master/drivers/amlogic/amports/video.c#L7869

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230303123312.155164-1-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Move the in_send statistic to __smb_send_rqst()

[ Upstream commit d0dc41119905f740e8d5594adce277f7c0de8c92 ]

When send SMB_COM_NT_CANCEL and RFC1002_SESSION_REQUEST, the
in_send statistic was lost.

Let's move the in_send statistic to the send function to avoid
this scenario.

Fixes: 7ee1af765dfa ("[CIFS]")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: chipsfb: Fix error codes in chipsfb_pci_init()

[ Upstream commit 77bc762451c2dc72bdbea07b857c916c9e7f4952 ]

The error codes are not set on these error paths.

Fixes: 145eed48de27 ("fbdev: Remove conflicting devices on PCI bus")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/yG+sm2mhdJeTZW@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panfrost: Don't sync rpm suspension after mmu flushing

[ Upstream commit ba3be66f11c3c49afaa9f49b99e21d88756229ef ]

Lockdep warns about potential circular locking dependency of devfreq
with the fs_reclaim caused by immediate device suspension when mapping is
released by shrinker. Fix it by doing the suspension asynchronously.

Reviewed-by: Steven Price <steven.price@arm.com>
Fixes: ec7eba47da86 ("drm/panfrost: Rework page table flushing and runtime PM interaction")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-3-dmitry.osipenko@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/gem: Prevent blocking within shrinker loop

[ Upstream commit 9630b585b607bd26f505d34620b14d75b9a5af7d ]

Consider this scenario:

1. APP1 continuously creates lots of small GEMs
2. APP2 triggers `drop_caches`
3. Shrinker starts to evict APP1 GEMs, while APP1 produces new purgeable
   GEMs
4. msm_gem_shrinker_scan() returns non-zero number of freed pages
   and causes shrinker to try shrink more
5. msm_gem_shrinker_scan() returns non-zero number of freed pages again,
   goto 4
6. The APP2 is blocked in `drop_caches` until APP1 stops producing
   purgeable GEMs

To prevent this blocking scenario, check number of remaining pages
that GPU shrinker couldn't release due to a GEM locking contention
or shrinking rejection. If there are no remaining pages left to shrink,
then there is no need to free up more pages and shrinker may break out
from the loop.

This problem was found during shrinker/madvise IOCTL testing of
virtio-gpu driver. The MSM driver is affected in the same way.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b352ba54a820 ("drm/msm/gem: Convert to using drm_gem_lru")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-2-dmitry.osipenko@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/virtio: Pass correct device to dma_sync_sgtable_for_device()

[ Upstream commit a54bace095d00e9222161495649688bc43de4dde ]

The "vdev->dev.parent" should be used instead of "vdev->dev" as a device
for which to perform the DMA operation in both
virtio_gpu_cmd_transfer_to_host_2d(3d).

Because the virtio-gpu device "vdev->dev" doesn't really have DMA OPS
assigned to it, but parent (virtio-pci or virtio-mmio) device
"vdev->dev.parent" has. The more, the sgtable in question the code is
trying to sync here was mapped for the parent device (by using its DMA OPS)
previously at:
virtio_gpu_object_shmem_init()->drm_gem_shmem_get_pages_sgt()->
dma_map_sgtable(), so should be synced here for the same parent device.

Fixes: b5c9ed70d1a9 ("drm/virtio: Improve DMA API usage for shmem BOs")
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224153450.526222-1-olekstysh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Allow transport-mode states with AF_UNSPEC selector

[ Upstream commit c276a706ea1f51cf9723ed8484feceaf961b8f89 ]

xfrm state selectors are matched against the inner-most flow
which can be of any address family.  Therefore middle states
in nested configurations need to carry a wildcard selector in
order to work at all.

However, this is currently forbidden for transport-mode states.

Fix this by removing the unnecessary check.

Fixes: 13996378e658 ("[IPSEC]: Rename mode to outer_mode and add inner_mode")
Reported-by: David George <David.George@sophos.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.1.20

Link: https://lore.kernel.org/r/20230315115740.429574234@linuxfoundation.org
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230316083444.336870717@linuxfoundation.org
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UML: define RUNTIME_DISCARD_EXIT

commit b99ddbe8336ee680257c8ab479f75051eaa49dcf upstream.

With CONFIG_VIRTIO_UML=y, GNU ld < 2.36 fails to link UML vmlinux
(w/wo CONFIG_LD_SCRIPT_STATIC).

  `.exit.text' referenced in section `.uml.exitcall.exit' of arch/um/drivers/virtio_uml.o: defined in discarded section `.exit.text' of arch/um/drivers/virtio_uml.o
  collect2: error: ld returned 1 exit status

This fix is similar to the following commits:

- 4b9880dbf3bd ("powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT")
- a494398bde27 ("s390: define RUNTIME_DISCARD_EXIT to fix link error
  with GNU ld < 2.36")
- c1c551bebf92 ("sh: define RUNTIME_DISCARD_EXIT")

Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"

commit 181127fb76e62d06ab17a75fd610129688612343 upstream.

This reverts commit 6c20822fada1b8adb77fa450d03a0d449686a4a9.

build bot failed on arch with different cache line size:
https://lore.kernel.org/bpf/50c35055-afa9-d01e-9a05-ea5351280e4f@intel.com/

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

filelocks: use mount idmapping for setlease permission check

commit 42d0c4bdf753063b6eec55415003184d3ca24f6e upstream.

A user should be allowed to take out a lease via an idmapped mount if
the fsuid matches the mapped uid of the inode. generic_setlease() is
checking the unmapped inode uid, causing these operations to be denied.

Fix this by comparing against the mapped inode uid instead of the
unmapped uid.

Fixes: 9caccd41541a ("fs: introduce MOUNT_ATTR_IDMAP")
Cc: stable@vger.kernel.org
Signed-off-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: adjust MALL size available for DCN32 and DCN321

commit 235fef6c7fd341026eee90cc546e6e8ff8b2c315 upstream.

[Why]
MALL size available can vary for different SKUs.
Use num_chans read from VBIOS to determine the available MALL size we can use

[How]
Define max_chans for DCN32 and DCN321.
If num_chans is max_chans, then return max_chans as we can access the
 entire MALL space.
Otherwise, define avail_chans as the number of available channels we are
 allowed instead.
Return corresponding number of channels back and use this to calculate
 available MALL size.

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Allow subvp on vactive pipes that are 2560x1440@60

commit 2ebd1036209c2e7b61e6bc6e5bee4b67c1684ac6 upstream.

Enable subvp on specifically 1440p@60hz displays even though it can
switch in vactive.

Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rc: gpio-ir-recv: add remove function

[ Upstream commit 30040818b338b8ebc956ce0ebd198f8d593586a6 ]

In case runtime PM is enabled, do runtime PM clean up to remove
cpu latency qos request, otherwise driver removal may have below
kernel dump:

[   19.463299] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000048
[   19.472161] Mem abort info:
[   19.474985]   ESR = 0x0000000096000004
[   19.478754]   EC = 0x25: DABT (current EL), IL = 32 bits
[   19.484081]   SET = 0, FnV = 0
[   19.487149]   EA = 0, S1PTW = 0
[   19.490361]   FSC = 0x04: level 0 translation fault
[   19.495256] Data abort info:
[   19.498149]   ISV = 0, ISS = 0x00000004
[   19.501997]   CM = 0, WnR = 0
[   19.504977] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000049f81000
[   19.511432] [0000000000000048] pgd=0000000000000000,
p4d=0000000000000000
[   19.518245] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[   19.524520] Modules linked in: gpio_ir_recv(+) rc_core [last
unloaded: rc_core]
[   19.531845] CPU: 0 PID: 445 Comm: insmod Not tainted
6.2.0-rc1-00028-g2c397a46d47c #72
[   19.531854] Hardware name: FSL i.MX8MM EVK board (DT)
[   19.531859] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[   19.551777] pc : cpu_latency_qos_remove_request+0x20/0x110
[   19.557277] lr : gpio_ir_recv_runtime_suspend+0x18/0x30
[gpio_ir_recv]
[   19.557294] sp : ffff800008ce3740
[   19.557297] x29: ffff800008ce3740 x28: 0000000000000000 x27:
ffff800008ce3d50
[   19.574270] x26: ffffc7e3e9cea100 x25: 00000000000f4240 x24:
ffffc7e3f9ef0e30
[   19.574284] x23: 0000000000000000 x22: ffff0061803820f4 x21:
0000000000000008
[   19.574296] x20: ffffc7e3fa75df30 x19: 0000000000000020 x18:
ffffffffffffffff
[   19.588570] x17: 0000000000000000 x16: ffffc7e3f9efab70 x15:
ffffffffffffffff
[   19.595712] x14: ffff800008ce37b8 x13: ffff800008ce37aa x12:
0000000000000001
[   19.602853] x11: 0000000000000001 x10: ffffcbe3ec0dff87 x9 :
0000000000000008
[   19.609991] x8 : 0101010101010101 x7 : 0000000000000000 x6 :
000000000f0bfe9f
[   19.624261] x5 : 00ffffffffffffff x4 : 0025ab8e00000000 x3 :
ffff006180382010
[   19.631405] x2 : ffffc7e3e9ce8030 x1 : ffffc7e3fc3eb810 x0 :
0000000000000020
[   19.638548] Call trace:
[   19.640995]  cpu_latency_qos_remove_request+0x20/0x110
[   19.646142]  gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv]
[   19.652339]  pm_generic_runtime_suspend+0x2c/0x44
[   19.657055]  __rpm_callback+0x48/0x1dc
[   19.660807]  rpm_callback+0x6c/0x80
[   19.664301]  rpm_suspend+0x10c/0x640
[   19.667880]  rpm_idle+0x250/0x2d0
[   19.671198]  update_autosuspend+0x38/0xe0
[   19.675213]  pm_runtime_set_autosuspend_delay+0x40/0x60
[   19.680442]  gpio_ir_recv_probe+0x1b4/0x21c [gpio_ir_recv]
[   19.685941]  platform_probe+0x68/0xc0
[   19.689610]  really_probe+0xc0/0x3dc
[   19.693189]  __driver_probe_device+0x7c/0x190
[   19.697550]  driver_probe_device+0x3c/0x110
[   19.701739]  __driver_attach+0xf4/0x200
[   19.705578]  bus_for_each_dev+0x70/0xd0
[   19.709417]  driver_attach+0x24/0x30
[   19.712998]  bus_add_driver+0x17c/0x240
[   19.716834]  driver_register+0x78/0x130
[   19.720676]  __platform_driver_register+0x28/0x34
[   19.725386]  gpio_ir_recv_driver_init+0x20/0x1000 [gpio_ir_recv]
[   19.731404]  do_one_initcall+0x44/0x2ac
[   19.735243]  do_init_module+0x48/0x1d0
[   19.739003]  load_module+0x19fc/0x2034
[   19.742759]  __do_sys_finit_module+0xac/0x12c
[   19.747124]  __arm64_sys_finit_module+0x20/0x30
[   19.751664]  invoke_syscall+0x48/0x114
[   19.755420]  el0_svc_common.constprop.0+0xcc/0xec
[   19.760132]  do_el0_svc+0x38/0xb0
[   19.763456]  el0_svc+0x2c/0x84
[   19.766516]  el0t_64_sync_handler+0xf4/0x120
[   19.770789]  el0t_64_sync+0x190/0x194
[   19.774460] Code: 910003fd a90153f3 aa0003f3 91204021 (f9401400)
[   19.780556] ---[ end trace 0000000000000000 ]---

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Fix analogue gain control

[ Upstream commit afa4805799c1d332980ad23339fdb07b5e0cf7e0 ]

Gain control is badly documented in publicly available (including
leaked) documentation.

There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value
(plus an enable bit in bit 6). The driver hardcodes it to 0x43, which
one application note states is equal to x1.047. The documentation also
states that 0x40 is equel to x1.000. The pre-gain thus seems to be
expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984.
What the pre-gain does is however unspecified.

There is then an AGC gain limit, in registers 0x3a18 and 0x3a19,
expressed as a 10-bit "real gain format" value. One application note
sets it to 0x00f8 and states it is equal to x15.5, so it appears to be
expressed in 1/16 increments, up to x63.9375.

The manual gain is stored in registers 0x350a and 0x350b, also as a
10-bit "real gain format" value. It is documented in the application
note as a Q6.4 values, up to x63.9375.

One version of the datasheet indicates that the sensor supports a
digital gain:

  The OV5640 supports 1/2/4 digital gain. Normally, the gain is
  controlled automatically by the automatic gain control (AGC) block.

It isn't clear how that would be controlled manually.

There appears to be no indication regarding whether the gain controlled
through registers 0x350a and 0x350b is an analogue gain only or also
includes digital gain. The words "real gain" don't necessarily mean
"combined analogue and digital gains". Some OmniVision sensors (such as
the OV8858) are documented as supoprting different formats for the gain
values, selectable through a register bit, and they are called "real
gain format" and "sensor gain format". For that sensor, we have (one of)
the gain registers documented as

  0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are
  fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain

  If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse
  gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1,
  gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain,
  0x70 is 4x gain

(The second part of the text makes little sense)

"Real gain" may thus refer to the combination of the coarse and fine
analogue gains as a single value.

The OV5640 0x350a and 0x350b registers thus appear to control analogue
gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific
control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it.

If registers 0x350a and 0x350b are later found to control digital gain
as well, the driver could then restrict the range of the analogue gain
control value to lower than x64 and add a separate digital gain control.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts: handle BrokenPipeError for python scripts

[ Upstream commit 87c7ee67deb7fce9951a5f9d80641138694aad17 ]

In the follow-up of commit fb3041d61f68 ("kbuild: fix SIGPIPE error
message for AR=gcc-ar and AR=llvm-ar"), Kees Cook pointed out that
tools should _not_ catch their own SIGPIPEs [1] [2].

Based on his feedback, LLVM was fixed [3].

However, Python's default behavior is to show noisy bracktrace when
SIGPIPE is sent. So, scripts written in Python are basically in the
same situation as the buggy llvm tools.

Example:

  $ make -s allnoconfig
  $ make -s allmodconfig
  $ scripts/diffconfig .config.old .config | head -n1
  -ALIX n
  Traceback (most recent call last):
    File "/home/masahiro/linux/scripts/diffconfig", line 132, in <module>
      main()
    File "/home/masahiro/linux/scripts/diffconfig", line 130, in main
      print_config("+", config, None, b[config])
    File "/home/masahiro/linux/scripts/diffconfig", line 64, in print_config
      print("+%s %s" % (config, new_value))
  BrokenPipeError: [Errno 32] Broken pipe

Python documentation [4] notes how to make scripts die immediately and
silently:

  """
  Piping output of your program to tools like head(1) will cause a
  SIGPIPE signal to be sent to your process when the receiver of its
  standard output closes early. This results in an exception like
  BrokenPipeError: [Errno 32] Broken pipe. To handle this case,
  wrap your entry point to catch this exception as follows:

    import os
    import sys

    def main():
        try:
            # simulate large output (your code replaces this loop)
            for x in range(10000):
                print("y")
            # flush output here to force SIGPIPE to be triggered
            # while inside this try block.
            sys.stdout.flush()
        except BrokenPipeError:
            # Python flushes standard streams on exit; redirect remaining output
            # to devnull to avoid another BrokenPipeError at shutdown
            devnull = os.open(os.devnull, os.O_WRONLY)
            os.dup2(devnull, sys.stdout.fileno())
            sys.exit(1)  # Python exits with error code 1 on EPIPE

    if __name__ == '__main__':
        main()

  Do not set SIGPIPE’s disposition to SIG_DFL in order to avoid
  BrokenPipeError. Doing that would cause your program to exit
  unexpectedly whenever any socket connection is interrupted while
  your program is still writing to it.
  """

Currently, tools/perf/scripts/python/intel-pt-events.py seems to be the
only script that fixes the issue that way.

tools/perf/scripts/python/compaction-times.py uses another approach
signal.signal(signal.SIGPIPE, signal.SIG_DFL) but the Python
documentation clearly says "Don't do it".

I cannot fix all Python scripts since there are so many.
I fixed some in the scripts/ directory.

[1]: https://lore.kernel.org/all/202211161056.1B9611A@keescook/
[2]: https://github.com/llvm/llvm-project/issues/59037
[3]: https://github.com/llvm/llvm-project/commit/4787efa38066adb51e2c049499d25b3610c0877b
[4]: https://docs.python.org/3/library/signal.html#note-on-sigpipe

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add SolidRun vendor ID

[ Upstream commit db6c4dee4c104f50ed163af71c53bfdb878a8318 ]

Add SolidRun vendor ID to pci_ids.h

The vendor ID is used in 2 different source files, the SNET vDPA driver
and PCI quirks.

Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-Id: <20230110165638.123745-2-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macintosh: windfarm: Use unsigned type for 1-bit bitfields

[ Upstream commit 748ea32d2dbd813d3bd958117bde5191182f909a ]

Clang warns:

  drivers/macintosh/windfarm_lm75_sensor.c:63:14: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
                  lm->inited = 1;
                             ^ ~

  drivers/macintosh/windfarm_smu_sensors.c:356:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
                  pow->fake_volts = 1;
                                  ^ ~
  drivers/macintosh/windfarm_smu_sensors.c:368:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
                  pow->quadratic = 1;
                                 ^ ~

There is no bug here since no code checks the actual value of these
fields, just whether or not they are zero (boolean context), but this
can be easily fixed by switching to an unsigned type.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230215-windfarm-wsingle-bit-bitfield-constant-conversion-v1-1-26415072e855@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha: fix R_ALPHA_LITERAL reloc for large modules

[ Upstream commit b6b17a8b3ecd878d98d5472a9023ede9e669ca72 ]

Previously, R_ALPHA_LITERAL relocations would overflow for large kernel
modules.

This was because the Alpha's apply_relocate_add was relying on the kernel's
module loader to have sorted the GOT towards the very end of the module as it
was mapped into memory in order to correctly assign the global pointer. While
this behavior would mostly work fine for small kernel modules, this approach
would overflow on kernel modules with large GOT's since the global pointer
would be very far away from the GOT, and thus, certain entries would be out of
range.

This patch fixes this by instead using the Tru64 behavior of assigning the
global pointer to be 32KB away from the start of the GOT. The change made
in this patch won't work for multi-GOT kernel modules as it makes the
assumption the module only has one GOT located at the beginning of .got,
although for the vast majority kernel modules, this should be fine. Of the
kernel modules that would previously result in a relocation error, none of
them, even modules like nouveau, have even come close to filling up a single
GOT, and they've all worked fine under this patch.

Signed-off-by: Edward Humes <aurxenon@lunos.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/kcsan: Exclude udelay to prevent recursive instrumentation

[ Upstream commit 2a7ce82dc46c591c9244057d89a6591c9639b9b9 ]

In order for KCSAN to increase its likelihood of observing a data race,
it sets a watchpoint on memory accesses and stalls, allowing for
detection of conflicting accesses by other kernel threads or interrupts.

Stalls are implemented by injecting a call to udelay in instrumented code.
To prevent recursive instrumentation, exclude udelay from being instrumented.

Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-3-rmclure@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64: Move paca allocation to early_setup()

[ Upstream commit dc222fa7737212fe0da513e5b8937c156d02225d ]

The early paca and boot cpuid dance is complicated and currently does
not quite work as expected for boot cpuid != 0 cases.

early_init_devtree() currently allocates the paca_ptrs and boot cpuid
paca, but until that returns and early_setup() calls setup_paca(), this
thread is currently still executing with smp_processor_id() == 0.

One problem this causes is the paca_ptrs[smp_processor_id()] pointer is
poisoned, so valid_emergency_stack() (any backtrace) and any similar
users will crash.

Another is that the hardware id which is set here will not be returned
by get_hard_smp_processor_id(smp_processor_id()), but it would work
correctly for boot_cpuid == 0, which could lead to difficult to
reproduce or find bugs. The hard id does not seem to be used by the rest
of early_init_devtree(), it just looks like all this code might have
been put here to allocate somewhere to store boot CPU hardware id while
scanning the devtree.

Rearrange things so the hwid is put in a global variable like
boot_cpuid, and do all the paca allocation and boot paca setup in the
64-bit early_setup() after we have everything ready to go.

The paca_ptrs[0] re-poisoning code in early_setup does not seem to have
ever worked, because paca_ptrs[0] was never not-poisoned when boot_cpuid
is not 0.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix build error on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64: Fix task_cpu in early boot when booting non-zero cpuid

[ Upstream commit 9fa24404f5044967753a6cd3e5e36f57686bec6e ]

powerpc/64 can boot on a non-zero SMP processor id. Initially, the boot
CPU is said to be "assumed to be 0" until early_init_devtree() discovers
the id from the device tree. That is not a good description because the
assumption can be wrong and that has to be handled, the better
description is that 0 is used as a placeholder, and things are fixed
after the real id is discovered.

smp_processor_id() is set to the boot cpuid, but task_cpu(current) is
not, which causes the smp_processor_id() == task_cpu(current) invariant
to be broken until init_idle() in sched_init().

This is quite fragile and could lead to subtle bugs in future. One bug
is that validate_sp_size uses task_cpu() to get the process stack, so
any stack trace from the booting CPU between early_init_devtree()
and sched_init() will have problems. Early on paca_ptrs[0] will be
poisoned, so that can cause machine checks dereferencing that memory
in real mode. Later, validating the current stack pointer against the
idle task of a different secondary will probably cause no stack trace
to be printed.

Fix this by setting thread_info->cpu right after smp_processor_id() is
set to the boot cpuid.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix SMP=n build as reported by sfr]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-3-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/bpf/32: Only set a stack frame when necessary

[ Upstream commit d084dcf256bc4565b4b1af9b00297ac7b51c7049 ]

Until now a stack frame was set at all time due to the need
to keep tail call counter in the stack.

But since commit 89d21e259a94 ("powerpc/bpf/32: Fix Oops on tail call
tests") the tail call counter is passed via register r4. It is therefore
not necessary anymore to have a stack frame for that.

Just like PPC64, implement bpf_has_stack_frame() and only sets the frame
when needed.

The difference with PPC64 is that PPC32 doesn't have a redzone, so
the stack is required as soon as non volatile registers are used or
when tail call count is set up.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix commit reference in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62d7b654a3cfe73d998697cb29bbc5ffd89bfdb1.1675245773.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*

[ Upstream commit b1dec4e78599a2ce5bf8557056cd6dd72e1096b0 ]

R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
for this SoC. Public users only have ES2 onwards.

In addition to the ES1 specific removals, a check for it was added
preventing the machine to boot further. It may otherwise inherit wrong
clock settings from ES2 which could damage the hardware.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230202092332.2504-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/iommu: fix memory leak with using debugfs_lookup()

[ Upstream commit b505063910c134778202dfad9332dfcecb76bab3 ]

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230202141919.2298821-1-gregkh@linuxfoundation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64: Don't recurse irq replay

[ Upstream commit 5746ca131e2496ccd5bb4d7a0244d6c38070cbf5 ]

Interrupt handlers called by soft-pending irq replay code can run
softirqs, softirq replay enables and disables local irqs, which allows
interrupts to come in including soft-masked interrupts, and it can
cause pending irqs to be replayed again. That makes the soft irq replay
state machine and possible races more complicated and fragile than it
needs to be.

Use irq_enter/irq_exit around irq replay to prevent softirqs running
while interrupts are being replayed. Softirqs will now be run at the
irq_exit() call after all the irq replaying is done. This prevents irqs
being replayed while irqs are being replayed, and should hopefully make
things simpler and easier to think about and debug.

A new PACA_IRQ_REPLAYING is added to prevent asynchronous interrupt
handlers hard-enabling EE while pending irqs are being replayed, because
that causes new pending irqs to arrive which is also a complexity. This
means pending irqs won't be profiled quite so well because perf irqs
can't be taken.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121102618.2824429-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Fix a compilation issue

[ Upstream commit 109d587a4b4d7ccca2200ab1f808f43ae23e2585 ]

arch/mips/include/asm/mach-rc32434/pci.h:377:
cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]

All bits in KORINA_STAT are already at the correct position, so there is
no addtional shift needed.

Signed-off-by: xurui <xurui@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

[ Upstream commit 80a6c216b16d7f5c584d2148c2e4345ea4eb06ce ]

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.

Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths

[ Upstream commit 03e1d60e177eedbd302b77af4ea5e21b5a7ade31 ]

The watch_queue_set_size() allocation error paths return the ret value
set via the prior pipe_resize_ring() call, which will always be zero.

As a result, IOC_WATCH_QUEUE_SET_SIZE callers such as "keyctl watch"
fail to detect kernel wqueue->notes allocation failures and proceed to
KEYCTL_WATCH_KEY, with any notifications subsequently lost.

Fixes: c73be61cede58 ("pipe: Add general notification queue support")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/adreno: fix runtime PM imbalance at unbind

[ Upstream commit 6153c44392b04ff2da1e9aa82ba87da9ab9a0fc1 ]

A recent commit moved enabling of runtime PM from adreno_gpu_init() to
adreno_load_gpu() (called on first open()), which means that unbind()
may now be called with runtime PM disabled in case the device was never
opened in between.

Make sure to only forcibly suspend and disable runtime PM at unbind() in
case runtime PM has been enabled to prevent a disable count imbalance.

This specifically avoids leaving runtime PM disabled when the device
is later opened after a successful bind:

msm_dpu ae01000.display-controller: [drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13

Fixes: 4b18299b3365 ("drm/msm/adreno: Defer enabling runpm until hw_init()")
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/lkml/20230203181245.3523937-1-quic_bjorande@quicinc.com
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/523549/
Link: https://lore.kernel.org/r/20230221101430.14546-2-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

adreno: Shutdown the GPU properly

[ Upstream commit e752e5454e6417da3f40ec1306a041ea96c56423 ]

During kexec on ARM device, we notice that device_shutdown() only calls
pm_runtime_force_suspend() while shutting down the GPU. This means the GPU
kthread is still running and further, there maybe active submits.

This causes all kinds of issues during a kexec reboot:

Warning from shutdown path:

[  292.509662] WARNING: CPU: 0 PID: 6304 at [...] adreno_runtime_suspend+0x3c/0x44
[  292.509863] Hardware name: Google Lazor (rev3 - 8) with LTE (DT)
[  292.509872] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  292.509881] pc : adreno_runtime_suspend+0x3c/0x44
[  292.509891] lr : pm_generic_runtime_suspend+0x30/0x44
[  292.509905] sp : ffffffc014473bf0
[...]
[  292.510043] Call trace:
[  292.510051]  adreno_runtime_suspend+0x3c/0x44
[  292.510061]  pm_generic_runtime_suspend+0x30/0x44
[  292.510071]  pm_runtime_force_suspend+0x54/0xc8
[  292.510081]  adreno_shutdown+0x1c/0x28
[  292.510090]  platform_shutdown+0x2c/0x38
[  292.510104]  device_shutdown+0x158/0x210
[  292.510119]  kernel_restart_prepare+0x40/0x4c

And here from GPU kthread, an SError OOPs:

[  192.648789]  el1h_64_error+0x7c/0x80
[  192.648812]  el1_interrupt+0x20/0x58
[  192.648833]  el1h_64_irq_handler+0x18/0x24
[  192.648854]  el1h_64_irq+0x7c/0x80
[  192.648873]  local_daif_inherit+0x10/0x18
[  192.648900]  el1h_64_sync_handler+0x48/0xb4
[  192.648921]  el1h_64_sync+0x7c/0x80
[  192.648941]  a6xx_gmu_set_oob+0xbc/0x1fc
[  192.648968]  a6xx_hw_init+0x44/0xe38
[  192.648991]  msm_gpu_hw_init+0x48/0x80
[  192.649013]  msm_gpu_submit+0x5c/0x1a8
[  192.649034]  msm_job_run+0xb0/0x11c
[  192.649058]  drm_sched_main+0x170/0x434
[  192.649086]  kthread+0x134/0x300
[  192.649114]  ret_from_fork+0x10/0x20

Fix by calling adreno_system_suspend() in the device_shutdown() path.

[ Applied Rob Clark feedback on fixing adreno_unbind() similarly, also
  tested as above. ]

Cc: Rob Clark <robdclark@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ricardo Ribalda <ribalda@chromium.org>
Cc: Ross Zwisler <zwisler@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/517633/
Link: https://lore.kernel.org/r/20230109222547.1368644-1-joel@joelfernandes.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Stable-dep-of: 6153c44392b0 ("drm/msm/adreno: fix runtime PM imbalance at unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4

[ Upstream commit 6ce2ea07c5ff0a8188eab0e5cd1f0e4899b36835 ]

Added the video capability query support for VCN version 4_0_4

Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/soc21: don't expose AV1 if VCN0 is harvested

[ Upstream commit a6de636eb04f146d23644dbbb7173e142452a9b7 ]

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 6ce2ea07c5ff ("drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: Fix deadlock during directory rename

[ Upstream commit 3c92792da8506a295afb6d032b4476e46f979725 ]

As lockdep properly warns, we should not be locking i_rwsem while having
transactions started as the proper lock ordering used by all directory
handling operations is i_rwsem -> transaction start. Fix the lock
ordering by moving the locking of the directory earlier in
ext4_rename().

Reported-by: syzbot+9d16c39efb5fade84574@syzkaller.appspotmail.com
Fixes: 0813299c586b ("ext4: Fix possible corruption when moving a directory")
Link: https://syzkaller.appspot.com/bug?extid=9d16c39efb5fade84574
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230301141004.15087-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix return value check in kfd

[ Upstream commit 20534dbcc7b7bfb447279cdcfb0d88ee3b779a18 ]

This patch fixes a return value check in kfd doorbell handling.
This function should return 0(error) only when the ida_simple_get
returns < 0(error), return > 0 is a success case.

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed")
Acked-by: Christian Koenig <chriatian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: Don't check text_mutex during stop_machine

[ Upstream commit 2a8db5ec4a28a0fce822d10224db9471a44b6925 ]

We're currently using stop_machine() to update ftrace & kprobes, which
means that the thread that takes text_mutex during may not be the same
as the thread that eventually patches the code.  This isn't actually a
race because the lock is still held (preventing any other concurrent
accesses) and there is only one thread running during stop_machine(),
but it does trigger a lockdep failure.

This patch just elides the lockdep check during stop_machine.

Fixes: c15ac4fd60d5 ("riscv/ftrace: Add dynamic function tracer support")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230303143754.4005217-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode

[ Upstream commit 76950340cf03b149412fe0d5f0810e52ac1df8cb ]

When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:

[    0.000000] ==================================================================
[    0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a
[    0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0
[    0.000000]
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43
[    0.000000] Hardware name: riscv-virtio,qemu (DT)
[    0.000000] Call Trace:
[    0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a
[    0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36
[    0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8
[    0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84
[    0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6
[    0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76
[    0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e
[    0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52
[    0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84
[    0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6
[    0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20
[    0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e
[    0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a
[    0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c
[    0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e
[    0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe
[    0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca
[    0.000000]
[    0.000000] The buggy address belongs to stack of task swapper/0
[    0.000000]  and is located at offset 0 in frame:
[    0.000000]  stack_trace_save+0x0/0xa6
[    0.000000]
[    0.000000] This frame has 1 object:
[    0.000000]  [32, 56) 'c'
[    0.000000]
[    0.000000] The buggy address belongs to the physical page:
[    0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07
[    0.000000] flags: 0x1000(reserved|zone=0)
[    0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000
[    0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff
[    0.000000] page dumped because: kasan: bad access detected
[    0.000000]
[    0.000000] Memory state around the buggy address:
[    0.000000]  ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000]  ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3
[    0.000000]                                            ^
[    0.000000]  ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000]  ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000] ==================================================================

Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise
mode.

Fixes: 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
Reported-by: Chathura Rajapaksha <chathura.abeyrathne.lk@gmail.com>
Link: https://lore.kernel.org/all/CAD7mqryDQCYyJ1gAmtMm8SASMWAQ4i103ptTb0f6Oda=tPY2=A@mail.gmail.com/
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230308091639.602024-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"

[ Upstream commit 647dd2c3f0e16b71a1a77897d038164d48eea154 ]

Let's revert commit 12724ba38992 ("erofs: fix kvcalloc() misuse with
__GFP_NOFAIL") since kvmalloc() already supports __GFP_NOFAIL in commit
a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc").  So
the original fix was wrong.

Actually there was some issue as [1] discussed, so before that mm fix
is landed, the warn could still happen but applying this commit first
will cause less.

[1] https://lore.kernel.org/r/20230305053035.1911-1-hsiangkao@linux.alibaba.com

Fixes: 12724ba38992 ("erofs: fix kvcalloc() misuse with __GFP_NOFAIL")
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230309053148.9223-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: fix struct pid leaks in OOB support

[ Upstream commit 2aab4b96900272885bc157f8b236abf1cdc02e08 ]

syzbot reported struct pid leak [1].

Issue is that queue_oob() calls maybe_add_creds() which potentially
holds a reference on a pid.

But skb->destructor is not set (either directly or by calling
unix_scm_to_skb())

This means that subsequent kfree_skb() or consume_skb() would leak
this reference.

In this fix, I chose to fully support scm even for the OOB message.

[1]
BUG: memory leak
unreferenced object 0xffff8881053e7f80 (size 128):
comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180
[<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285
[<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684
[<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825
[<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
[<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: syzbot+7699d9e5635c10253a27@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rao Shoaib <rao.shoaib@oracle.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230307164530.771896-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC

[ Upstream commit c8b8a3c601f2cfad25ab5ce5b04df700048aef6e ]

The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as
internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5
receives corrupted frames, unless port 6 (attached to GMAC0) has been
brought up by the driver. This is true regardless of whether port 5 is
used as a user port or as a CPU port (carrying DSA tags).

Offline debugging (blind for me) which began in the linked thread showed
experimentally that the configuration done by the driver for port 6
contains a step which is needed by port 5 as well - the write to
CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from
the comment "Set core clock into 500Mhz"). Prints put by Arınç show that
the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) |
RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the
MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi
BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both
values of the register, while on the MT7621 SoC it cannot.

The call path that triggers the register write is:

mt753x_phylink_mac_config() for port 6
-> mt753x_pad_setup()
   -> mt7530_pad_clk_setup()

so this fully explains the behavior noticed by Arınç, that bringing port
6 up is necessary.

The simplest fix for the problem is to extract the register writes which
are needed for both port 5 and 6 into a common mt7530_pll_setup()
function, which is called at mt7530_setup() time, immediately after
switch reset. We can argue that this mirrors the code layout introduced
in mt7531_setup() by commit 42bc4fafe359 ("net: mt7531: only do PLL once
after the reset"), in that the PLL setup has the exact same positioning,
and further work to consolidate the separate setup() functions is not
hindered.

Testing confirms that:

- the slight reordering of writes to MT7530_P6ECR and to
  CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not
  appear to cause problems for the operation of port 6 on MT7621 and on
  MT7623 (where port 5 also always worked)

- packets sent through port 5 are not corrupted anymore, regardless of
  whether port 6 is enabled by phylink or not (or even present in the
  device tree)

My algorithm for determining the Fixes: tag is as follows. Testing shows
that some logic from mt7530_pad_clk_setup() is needed even for port 5.
Prior to commit ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK
API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so
port 5 included. That commit replaced it with a temporary "Port 5 is not
supported!" comment, and the following commit 38f790a80560 ("net: dsa:
mt7530: Add support for port 5") replaced that comment with a
configuration procedure in mt7530_setup_port5() which was insufficient
for port 5 to work. I'm laying the blame on the patch that claimed
support for port 5, although one would have also needed the change from
commit c3b8e07909db ("net: dsa: mt7530: setup core clock even in TRGMII
mode") for the write to be performed completely independently from port
6's configuration.

Thanks go to Arınç for describing the problem, for debugging and for
testing.

Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/
Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230307155411.868573-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix a server shutdown leak

[ Upstream commit 9ca6705d9d609441d34f8b853e1e4a6369b3b171 ]

Fix a race where kthread_stop() may prevent the threadfn from ever getting
called.  If that happens the svc_rqst will not be cleaned up.

Fixes: ed6473ddc704 ("NFSv4: Fix callback server shutdown")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Unlock contexts in the queue context cache in case of fault detection

[ Upstream commit ea9dd2e5c6d12c8b65ce7514c8359a70eeaa0e70 ]

NDC caches contexts of frequently used queue's (Rx and Tx queues)
contexts. Due to a HW errata when NDC detects fault/poision while
accessing contexts it could go into an illegal state where a cache
line could get locked forever. To makesure all cache lines in NDC
are available for optimum performance upon fault/lockerror/posion
errors scan through all cache lines in NDC and clear the lock bit.

Fixes: 4a3581cd5995 ("octeontx2-af: NPA AQ instruction enqueue support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix fallback failed while sendmsg with fastopen

[ Upstream commit ce7ca794712f186da99719e8b4e97bd5ddbb04c3 ]

Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.

For the application, the general usages of MSG_FASTOPEN likes

fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)

Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.

Fixes: ee9dfbef02d1 ("net/smc: handle sockopts forcing fallback")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
v2 -> v1: Optimize code style
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethernet: ice: avoid gcc-9 integer overflow warning

[ Upstream commit 8f5c5a790e3025d6eca96bf7ee5e3873dc92373f ]

With older compilers like gcc-9, the calculation of the vlan
priority field causes a false-positive warning from the byteswap:

In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4:
drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower':
include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow]
   15 |  (((__u16)(x) & (__u16)0x00ffU) << 8) |   \
      |   ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16'
  106 |  ___constant_swab16(x) :   \
      |  ^~~~~~~~~~~~~~~~~~
include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16'
   42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
      |                                           ^~~~~~~~
include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16'
   96 | #define cpu_to_be16 __cpu_to_be16
      |                     ^~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16'
 1458 |     cpu_to_be16((match.key->vlan_priority <<
      |     ^~~~~~~~~~~

After a change to be16_encode_bits(), the code becomes more
readable to both people and compilers, which avoids the warning.

Fixes: 34800178b302 ("ice: Add support for VLAN priority filters in switchdev")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix DSCP PFC TLV creation

[ Upstream commit fef3f92e8a4214652d8f33f50330dc5a92efbf11 ]

When creating the TLV to send to the FW for configuring DSCP mode PFC,the
PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8
bit bitmask for enabled classes for PFC.  This means that traffic classes
4-7 could not be enabled for PFC.

Remove the mask completely, as it is not necessary, as we are assigning 8
bits to an 8 bit field.

Fixes: 2a87bd73e50d ("ice: Add DSCP support")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Protect against filesystem freezing

[ Upstream commit fd9a2e1d513823e840960cb3bc26d8b7749d4ac2 ]

Flole observes this WARNING on occasion:

[1210423.486503] WARNING: CPU: 8 PID: 1524732 at fs/ext4/ext4_jbd2.c:75 ext4_journal_check_start+0x68/0xb0

Reported-by: <flole@flole.de>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217123
Fixes: 73da852e3831 ("nfsd: use vfs_iter_read/write")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: fix wrong mode for blkdev_put() from disk_scan_partitions()

[ Upstream commit 428913bce1e67ccb4dae317fd0332545bf8c9233 ]

If disk_scan_partitions() is called with 'FMODE_EXCL',
blkdev_get_by_dev() will be called without 'FMODE_EXCL', however, follow
blkdev_put() is still called with 'FMODE_EXCL', which will cause
'bd_holders' counter to leak.

Fix the problem by using the right mode for blkdev_put().

Reported-by: syzbot+2bcc0d79e548c4f62a59@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/f9649d501bc8c3444769418f6c26263555d9d3be.camel@linux.ibm.com/T/
Tested-by: Julian Ruess <julianr@linux.ibm.com>
Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it

[ Upstream commit 7e7e1541c91615e9950d0b96bcd1806d297e970e ]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: ef0f62264b2a ("platform/x86: mlx-platform: Add physical bus number auto detection")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-7-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform: mellanox: select REGMAP instead of depending on it

[ Upstream commit 03f5eb300ad1241f854269a3e521b119189a4493 ]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

For NVSW_SN2201, select REGMAP_I2C instead of depending on it.

Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox register access driver")
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-6-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: adopt safer max chain length

[ Upstream commit c77737b736ceb50fdf150434347dbd81ec76dbb1 ]

Customers using GKE 1.25 and 1.26 are facing conntrack issues
root caused to commit c9c3b6811f74 ("netfilter: conntrack: make
max chain length random").

Even if we assume Uniform Hashing, a bucket often reachs 8 chained
items while the load factor of the hash table is smaller than 0.5

With a limit of 16, we reach load factors of 3.
With a limit of 32, we reach load factors of 11.
With a limit of 40, we reach load factors of 15.
With a limit of 50, we reach load factors of 24.

This patch changes MIN_CHAINLEN to 50, to minimize risks.

Ideally, we could in the future add a cushion based on expected
load factor (2 * nf_conntrack_max / nf_conntrack_buckets),
because some setups might expect unusual values.

Fixes: c9c3b6811f74 ("netfilter: conntrack: make max chain length random")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sd: Fix wrong zone_write_granularity value during revalidate

[ Upstream commit 288b3271d920c9ba949c3bab0f749f4cecc70e09 ]

When the sd driver revalidates host-managed SMR disks, it calls
disk_set_zoned() which changes the zone_write_granularity attribute value
to the logical block size regardless of the device type. After that, the sd
driver overwrites the value in sd_zbc_read_zone() with the physical block
size, since ZBC/ZAC requires this for host-managed disks. Between the calls
to disk_set_zoned() and sd_zbc_read_zone(), there exists a window where the
attribute shows the logical block size as the zone_write_granularity value,
which is wrong for host-managed disks. The duration of the window is from
20ms to 200ms, depending on report zone command execution time.

To avoid the wrong zone_write_granularity value between disk_set_zoned()
and sd_zbc_read_zone(), modify the value not in sd_zbc_read_zone() but
just after disk_set_zoned() call.

Fixes: a805a4fa4fa3 ("block: introduce zone_write_granularity limit")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20230306063024.3376959-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: Update max supported LD IDs to 240

[ Upstream commit bfa659177dcba48cf13f2bd88c1972f12a60bf1c ]

The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF)
is reserved for deleted LDs. However, in some cases, firmware was assigning
LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the
wrong disk as deleted. This in turn caused the wrong disk device to be
taken offline by the SCSI midlayer.

To address this issue, limit the LD ID range from 255 to 240. This ensures
the deleted LD ID is properly identified and removed by the driver without
accidently deleting any valid LDs.

Fixes: ae6874ba4b43 ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update")
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tls: fix device-offloaded sendpage straddling records

[ Upstream commit e539a105f947b9db470fec39fe91d85fe737a432 ]

Adrien reports that incorrect data is transmitted when a single
page straddles multiple records. We would transmit the same
data in all iterations of the loop.

Reported-by: Adrien Moulin <amoulin@corp.free.fr>
Link: https://lore.kernel.org/all/61481278.42813558.1677845235112.JavaMail.zimbra@corp.free.fr
Fixes: c1318b39c7d3 ("tls: Add opt-in zerocopy mode of sendfile()")
Tested-by: Adrien Moulin <amoulin@corp.free.fr>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230304192610.3818098-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: fix RX data corruption issue

[ Upstream commit 193250ace270fecd586dd2d0dfbd9cbd2ade977f ]

Fix data corruption issue with SerDes connected PHYs operating at 1.25
Gbps speed where we could previously observe about 30% packet loss while
the bad packet counter was increasing.

As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531
switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using
rate-adaptation to 2500Base-X mode, this issue only got exposed now when
we started trying to use SFP modules operating with 1.25 Gbps with the
BananaPi R3 board.

The fix is to set bit 12 which disables the RX FIFO clear function when
setting up MAC MCR, MediaTek SDK did the same change stating:
"If without this patch, kernel might receive invalid packets that are
corrupted by GMAC."[1]

[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/d8a2975939a12686c4a95c40db21efdc3f821f63

Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: smsc: fix link up detection in forced irq mode

[ Upstream commit 58aac3a2ef414fea6d7fdf823ea177744a087d13 ]

Currently link up can't be detected in forced mode if polling
isn't used. Only link up interrupt source we have is aneg
complete which isn't applicable in forced mode. Therefore we
have to use energy-on as link up indicator.

Fixes: 7365494550f6 ("net: phy: smsc: skip ENERGYON interrupt if disabled")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR

[ Upstream commit 9b459804ff9973e173fabafba2a1319f771e85fa ]

btf_datasec_resolve contains a bug that causes the following BTF
to fail loading:

    [1] DATASEC a size=2 vlen=2
        type_id=4 offset=0 size=1
        type_id=7 offset=1 size=1
    [2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
    [3] PTR (anon) type_id=2
    [4] VAR a type_id=3 linkage=0
    [5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
    [6] TYPEDEF td type_id=5
    [7] VAR b type_id=6 linkage=0

This error message is printed during btf_check_all_types:

    [1] DATASEC a size=2 vlen=2
        type_id=7 offset=1 size=1 Invalid type

By tracing btf_*_resolve we can pinpoint the problem:

    btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0
        btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0
            btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0
        btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0
    btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22

The last invocation of btf_datasec_resolve should invoke btf_var_resolve
by means of env_stack_push, instead it returns EINVAL. The reason is that
env_stack_push is never executed for the second VAR.

    if (!env_type_is_resolve_sink(env, var_type) &&
        !env_type_is_resolved(env, var_type_id)) {
        env_stack_set_next_member(env, i + 1);
        return env_stack_push(env, var_type, var_type_id);
    }

env_type_is_resolve_sink() changes its behaviour based on resolve_mode.
For RESOLVE_PTR, we can simplify the if condition to the following:

    (btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved()

Since we're dealing with a VAR the clause evaluates to false. This is
not sufficient to trigger the bug however. The log output and EINVAL
are only generated if btf_type_id_size() fails.

    if (!btf_type_id_size(btf, &type_id, &type_size)) {
        btf_verifier_log_vsi(env, v->t, vsi, "Invalid type");
        return -EINVAL;
    }

Most types are sized, so for example a VAR referring to an INT is not a
problem. The bug is only triggered if a VAR points at a modifier. Since
we skipped btf_var_resolve that modifier was also never resolved, which
means that btf_resolved_type_id returns 0 aka VOID for the modifier.
This in turn causes btf_type_id_size to return NULL, triggering EINVAL.

To summarise, the following conditions are necessary:

- VAR pointing at PTR, STRUCT, UNION or ARRAY
- Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or
  TYPE_TAG

The fix is to reset resolve_mode to RESOLVE_TBD before attempting to
resolve a VAR from a DATASEC.

Fixes: 1dc92851849c ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES

[ Upstream commit 6c20822fada1b8adb77fa450d03a0d449686a4a9 ]

&xdp_buff and &xdp_frame are bound in a way that

xdp_buff->data_hard_start == xdp_frame

It's always the case and e.g. xdp_convert_buff_to_frame() relies on
this.
IOW, the following:

for (u32 i = 0; i < 0xdead; i++) {
xdpf = xdp_convert_buff_to_frame(&xdp);
xdp_convert_frame_to_buff(xdpf, &xdp);
}

shouldn't ever modify @xdpf's contents or the pointer itself.
However, "live packet" code wrongly treats &xdp_frame as part of its
context placed *before* the data_hard_start. With such flow,
data_hard_start is sizeof(*xdpf) off to the right and no longer points
to the XDP frame.

Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several
places and praying that there are no more miscalcs left somewhere in the
code, unionize ::frm with ::data in a flex array, so that both starts
pointing to the actual data_hard_start and the XDP frame actually starts
being a part of it, i.e. a part of the headroom, not the context.
A nice side effect is that the maximum frame size for this mode gets
increased by 40 bytes, as xdp_buff::frame_sz includes everything from
data_hard_start (-> includes xdpf already) to the end of XDP/skb shared
info.
Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it
hardcoded for 64 bit && 4k pages, it can be made more flexible later on.

Minor: align `&head->data` with how `head->frm` is assigned for
consistency.
Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for
clarity.

(was found while testing XDP traffic generator on ice, which calls
 xdp_convert_frame_to_buff() for each XDP frame)

Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230215185440.4126672-1-aleksander.lobakin@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix extent map logging bit not cleared for split maps after dropping range

[ Upstream commit e4cc1483f35940c9288c332dd275f6fad485f8d2 ]

At btrfs_drop_extent_map_range() we are clearing the EXTENT_FLAG_LOGGING
bit on a 'flags' variable that was not initialized. This makes static
checkers complain about it, so initialize the 'flags' variable before
clearing the bit.

In practice this has no consequences, because EXTENT_FLAG_LOGGING should
not be set when btrfs_drop_extent_map_range() is called, as an fsync locks
the inode in exclusive mode, locks the inode's mmap semaphore in exclusive
mode too and it always flushes all delalloc.

Also add a comment about why we clear EXTENT_FLAG_LOGGING on a copy of the
flags of the split extent map.

Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/Y%2FyipSVozUDEZKow@kili/
Fixes: db21370bffbc ("btrfs: drop extent map range more efficiently")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: mm: Move initrd phys_to_virt handling after paging_init()

[ Upstream commit d4b97925e87eb133e400fe4a482d750c74ce392f ]

When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):

    initrd: 0ef0602c - 0f800000
    Zone ranges:
      DMA      [mem 0x0000000008000000-0x000000f7ffffffff]
      Normal   empty
    Movable zone start for each node
    Early memory node ranges
      node   0: [mem 0x0000000008000000-0x000000000f7fffff]
    Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
    Unable to handle kernel access at virtual address (ptrval)
    Oops: 00000000
    Modules linked in:
    PC: [<00201d3c>] memcmp+0x28/0x56

As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init().  Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().

While at it, reduce #ifdef clutter by using IS_ENABLED() instead.

Fixes: 376e3fdecb0dcae2 ("m68k: Enable memtest functionality")
Reported-by: Stephen Walsh <vk3heg@vk3heg.net>
Link: https://lists.debian.org/debian-68k/2022/09/msg00007.html
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4f45f05f377bf3f5baf88dbd5c3c8aeac59d94f0.camel@physik.fu-berlin.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/dff216da09ab7a60217c3fc2147e671ae07d636f.1677528627.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: tproxy: fix deadlock due to missing BH disable

[ Upstream commit 4a02426787bf024dafdb79b362285ee325de3f5e ]

The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.

Functions that are called from either xtables or nftables must assume
that they can be called in process context.

inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.

Add a small helper that takes care of this and use it.

Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/
Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Reported-and-tested-by: Major Dávid <major.david@balasys.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ctnetlink: revert to dumping mark regardless of event type

[ Upstream commit 9f7dd42f0db1dc6915a52d4a8a96ca18dd8cc34e ]

It seems that change was unintentional, we have userspace code that
needs the mark while listening for events like REPLY, DESTROY, etc.
Also include 0-marks in requested dumps, as they were before that fix.

Fixes: 1feeae071507 ("netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark")
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Avoid order-5 memory allocation for TPA data

[ Upstream commit accd7e23693aaaa9aa0d3e9eca0ae77d1be80ab3 ]

The driver needs to keep track of all the possible concurrent TPA (GRO/LRO)
completions on the aggregation ring.  On P5 chips, the maximum number
of concurrent TPA is 256 and the amount of memory we allocate is order-5
on systems using 4K pages.  Memory allocation failure has been reported:

NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1
CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1
Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022
Call Trace:
 dump_stack+0x57/0x6e
 warn_alloc.cold.120+0x7b/0xdd
 ? _cond_resched+0x15/0x30
 ? __alloc_pages_direct_compact+0x15f/0x170
 __alloc_pages_slowpath.constprop.108+0xc58/0xc70
 __alloc_pages_nodemask+0x2d0/0x300
 kmalloc_order+0x24/0xe0
 kmalloc_order_trace+0x19/0x80
 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en]
 ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en]
 __bnxt_open_nic+0x12e/0x780 [bnxt_en]
 bnxt_open+0x10b/0x240 [bnxt_en]
 __dev_open+0xe9/0x180
 __dev_change_flags+0x1af/0x220
 dev_change_flags+0x21/0x60
 do_setlink+0x35c/0x1100

Instead of allocating this big chunk of memory and dividing it up for the
concurrent TPA instances, allocate each small chunk separately for each
TPA instance.  This will reduce it to order-0 allocations.

Fixes: 79632e9ba386 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phylib: get rid of unnecessary locking

[ Upstream commit f4b47a2e9463950df3e7c8b70e017877c1d4eb11 ]

The locking in phy_probe() and phy_remove() does very little to prevent
any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA
warnings. Remove it.

======================================================
WARNING: possible circular locking dependency detected
6.2.0-dirty #1108 Tainted: G        W   E
------------------------------------------------------
ip/415 is trying to acquire lock:
ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy]

but task is already holding lock:
ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}-{3:3}:
       __lock_acquire+0x35c/0x6c0
       lock_acquire.part.0+0xcc/0x220
       lock_acquire+0x68/0x84
       __mutex_lock+0x8c/0x414
       mutex_lock_nested+0x34/0x40
       rtnl_lock+0x24/0x30
       sfp_bus_add_upstream+0x34/0x150
       phy_sfp_probe+0x4c/0x94 [libphy]
       mv3310_probe+0x148/0x184 [marvell10g]
       phy_probe+0x8c/0x200 [libphy]
       call_driver_probe+0xbc/0x15c
       really_probe+0xc0/0x320
       __driver_probe_device+0x84/0x120
       driver_probe_device+0x44/0x120
       __device_attach_driver+0xc4/0x160
       bus_for_each_drv+0x80/0xe0
       __device_attach+0xb0/0x1f0
       device_initial_probe+0x1c/0x2c
       bus_probe_device+0xa4/0xb0
       device_add+0x360/0x53c
       phy_device_register+0x60/0xa4 [libphy]
       fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio]
       fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio]
       of_mdiobus_register+0x140/0x340 [of_mdio]
       orion_mdio_probe+0x298/0x3c0 [mvmdio]
       platform_probe+0x70/0xe0
       call_driver_probe+0x34/0x15c
       really_probe+0xc0/0x320
       __driver_probe_device+0x84/0x120
       driver_probe_device+0x44/0x120
       __driver_attach+0x104/0x210
       bus_for_each_dev+0x78/0xdc
       driver_attach+0x2c/0x3c
       bus_add_driver+0x184/0x240
       driver_register+0x80/0x13c
       __platform_driver_register+0x30/0x3c
       xt_compat_calc_jump+0x28/0xa4 [x_tables]
       do_one_initcall+0x50/0x1b0
       do_init_module+0x50/0x1fc
       load_module+0x684/0x744
       __do_sys_finit_module+0xc4/0x140
       __arm64_sys_finit_module+0x28/0x34
       invoke_syscall+0x50/0x120
       el0_svc_common.constprop.0+0x6c/0x1b0
       do_el0_svc+0x34/0x44
       el0_svc+0x48/0xf0
       el0t_64_sync_handler+0xb8/0xc0
       el0t_64_sync+0x1a0/0x1a4

-> #0 (&dev->lock){+.+.}-{3:3}:
       check_prev_add+0xb4/0xc80
       validate_chain+0x414/0x47c
       __lock_acquire+0x35c/0x6c0
       lock_acquire.part.0+0xcc/0x220
       lock_acquire+0x68/0x84
       __mutex_lock+0x8c/0x414
       mutex_lock_nested+0x34/0x40
       phy_attach_direct+0x17c/0x3a0 [libphy]
       phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink]
       phylink_fwnode_phy_connect+0x48/0x60 [phylink]
       mvpp2_open+0xec/0x2e0 [mvpp2]
       __dev_open+0x104/0x214
       __dev_change_flags+0x1d4/0x254
       dev_change_flags+0x2c/0x7c
       do_setlink+0x254/0xa50
       __rtnl_newlink+0x430/0x514
       rtnl_newlink+0x58/0x8c
       rtnetlink_rcv_msg+0x17c/0x560
       netlink_rcv_skb+0x64/0x150
       rtnetlink_rcv+0x20/0x30
       netlink_unicast+0x1d4/0x2b4
       netlink_sendmsg+0x1a4/0x400
       ____sys_sendmsg+0x228/0x290
       ___sys_sendmsg+0x88/0xec
       __sys_sendmsg+0x70/0xd0
       __arm64_sys_sendmsg+0x2c/0x40
       invoke_syscall+0x50/0x120
       el0_svc_common.constprop.0+0x6c/0x1b0
       do_el0_svc+0x34/0x44
       el0_svc+0x48/0xf0
       el0t_64_sync_handler+0xb8/0xc0
       el0t_64_sync+0x1a0/0x1a4

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock(&dev->lock);
                               lock(rtnl_mutex);
  lock(&dev->lock);

 *** DEADLOCK ***

Fixes: 298e54fa810e ("net: phy: add core phylib sfp support")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: add to set device wake up flag when stmmac init phy

[ Upstream commit a9334b702a03b693f54ebd3b98f67bf722b74870 ]

When MAC is not support PMT, driver will check PHY's WoL capability
and set device wakeup capability in stmmac_init_phy(). We can enable
the WoL through ethtool, the driver would enable the device wake up
flag. Now the device_may_wakeup() return true.

But if there is a way which enable the PHY's WoL capability derectly,
like in BIOS. The driver would not know the enable thing and would not
set the device wake up flag. The phy_suspend may failed like this:

[   32.409063] PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x50 returns -16
[   32.409065] PM: Device stmmac-1:00 failed to suspend: error -16
[   32.409067] PM: Some devices failed to suspend, or early wake event detected

Add to set the device wakeup enable flag according to the get_wol
function result in PHY can fix the error in this scene.

v2: add a Fixes tag.

Fixes: 1d8e5b0f3f2c ("net: stmmac: Support WOL with phy")
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: clear DSPP reservations in rm release

[ Upstream commit 5ec498ba86550909f2611b07087d57a71a78c336 ]

Clear DSPP reservations from the global state during
rm release

Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver")
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/522443/
Link: https://lore.kernel.org/r/1676286704-818-2-git-send-email-quic_kalyant@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks

[ Upstream commit 0abb6a24aabc1252eae75fe23b0ccd3217c6ee07 ]

DMA2 and DMA3 planes on msm8998 should use corresponding DMA2 and DMA3
clocks rather than CURSOR0/1 clocks (which are used for the CURSOR
planes). Correct corresponding SSPP declarations.

Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Cc: Jami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522230/
Link: https://lore.kernel.org/r/20230211231259.1308718-13-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: drop DPU_DIM_LAYER from MIXER_MSM8998_MASK

[ Upstream commit a5045b00a68171de11603812f4304179ef608e60 ]

The msm8998 doesn't seem to support DIM_LAYER, so drop it from
the supported features mask.

Fixes: 2d8a4edb672d ("drm/msm/dpu: use feature bit for LM combined alpha check")
Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522231/
Link: https://lore.kernel.org/r/20230211231259.1308718-12-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix len of sc7180 ctl blocks

[ Upstream commit ce6bd00abc220e9edf10986234fadba6462b4abf ]

Change sc7180's ctl block len to 0x1dc.

Fixes: 7bdc0c4b8126 ("msm:disp:dpu1: add support for display for SC7180 target")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522210/
Link: https://lore.kernel.org/r/20230211231259.1308718-5-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()

[ Upstream commit d900f3d20cc3169ce42ec72acc850e662a4d4db2 ]

When the buffer length of the recvmsg system call is 0, we got the
flollowing soft lockup problem:

watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149]
CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:remove_wait_queue+0xb/0xc0
Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20
RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768
RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040
RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7
R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800
R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0
FS:  00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 tcp_msg_wait_data+0x279/0x2f0
 tcp_bpf_recvmsg_parser+0x3c6/0x490
 inet_recvmsg+0x280/0x290
 sock_recvmsg+0xfc/0x120
 ____sys_recvmsg+0x160/0x3d0
 ___sys_recvmsg+0xf0/0x180
 __sys_recvmsg+0xea/0x1a0
 do_syscall_64+0x3f/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

The logic in tcp_bpf_recvmsg_parser is as follows:

msg_bytes_ready:
copied = sk_msg_recvmsg(sk, psock, msg, len, flags);
if (!copied) {
wait data;
goto msg_bytes_ready;
}

In this case, "copied" always is 0, the infinite loop occurs.

According to the Linux system call man page, 0 should be returned in this
case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly
return. Also modify several other functions with the same problem.

Fixes: 1f5be6b3b063 ("udp: Implement udp_bpf_recvmsg() for sockmap")
Fixes: 9825d866ce0d ("af_unix: Implement unix_dgram_bpf_recvmsg()")
Fixes: c5d2177a72a1 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230303080946.1146638-1-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: copy last block omitted in ice_get_module_eeprom()

[ Upstream commit 84cba1840e68430325ac133a11be06bfb2f7acd8 ]

ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice:
Reimplement module reads used by ethtool") In this refactor,
ice_get_module_eeprom() reads the eeprom in blocks of size 8.
But the condition that should protect the buffer overflow
ignores the last block. The last block always contains zeros.

Bug uncovered by ethtool upstream commit 9538f384b535
("netlink: eeprom: Defer page requests to individual parsers")
After this commit, ethtool reads a block with length = 1;
to read the SFF-8024 identifier value.

unpatched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset          Values
------          ------
0x0090:         00 00 00 00 00 00 00 00
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset          Values
------          ------
0x0090:         00 00 01 a0 4d 65 6c 6c 00 00 00 00
$

$ ethtool -m enp65s0f0np0
Offset          Values
------          ------
0x0000:         11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0020:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0030:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0040:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0050:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0060:         00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00
0x0070:         00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00

patched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset          Values
------          ------
0x0090:         00 00 01 a0 4d 65 6c 6c
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset          Values
------          ------
0x0090:         00 00 01 a0 4d 65 6c 6c 61 6e 6f 78
$ ethtool -m enp65s0f0np0
    Identifier                                : 0x11 (QSFP28)
    Extended identifier                       : 0x00
    Extended identifier description           : 1.5W max. Power consumption
    Extended identifier description           : No CDR in TX, No CDR in RX
    Extended identifier description           : High Power Class (> 3.5 W) not enabled
    Connector                                 : 0x23 (No separable connector)
    Transceiver codes                         : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Transceiver type                          : 40G Ethernet: 40G Base-CR4
    Transceiver type                          : 25G Ethernet: 25G Base-CR CA-N
    Encoding                                  : 0x05 (64B/66B)
    BR, Nominal                               : 25500Mbps
    Rate identifier                           : 0x00
    Length (SMF,km)                           : 0km
    Length (OM3 50um)                         : 0m
    Length (OM2 50um)                         : 0m
    Length (OM1 62.5um)                       : 0m
    Length (Copper or Active cable)           : 1m
    Transmitter technology                    : 0xa0 (Copper cable unequalized)
    Attenuation at 2.5GHz                     : 4db
    Attenuation at 5.0GHz                     : 5db
    Attenuation at 7.0GHz                     : 7db
    Attenuation at 12.9GHz                    : 10db
    ........
    ....

Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: caif: Fix use-after-free in cfusbl_device_notify()

[ Upstream commit 9781e98a97110f5e76999058368b4be76a788484 ]

syzbot reported use-after-free in cfusbl_device_notify() [1].  This
causes a stack trace like below:

BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214

CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
 print_report mm/kasan/report.c:429 [inline]
 kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
 cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
 call_netdevice_notifiers net/core/dev.c:1997 [inline]
 netdev_wait_allrefs_any net/core/dev.c:10227 [inline]
 netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341
 default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334
 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>

When unregistering a net device, unregister_netdevice_many_notify()
sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers
with NETDEV_UNREGISTER, and adds the device to the todo list.

Later on, devices in the todo list are processed by netdev_run_todo().
netdev_run_todo() waits devices' reference count become 1 while
rebdoadcasting NETDEV_UNREGISTER notification.

When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple
times, the parent device might be freed.  This could cause UAF.
Processing NETDEV_UNREGISTER multiple times also causes inbalance of
reference count for the module.

This patch fixes the issue by accepting only first NETDEV_UNREGISTER
notification.

Fixes: 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface")
CC: sjur.brandeland@stericsson.com <sjur.brandeland@stericsson.com>
Reported-by: syzbot+b563d33852b893653a9e@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c3bfd8e2450adab3bffe4d80821fbbced600407f
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230301163913.391304-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver

[ Upstream commit e57cf3639c323eeed05d3725fd82f91b349adca8 ]

Move the LAN7800 internal phy (phy ID  0x0007c132) specific register
accesses to the phy driver (microchip.c).

Fix the error reported by Enguerrand de Ribaucourt in December 2022,
"Some operations during the cable switch workaround modify the register
LAN88XX_INT_MASK of the PHY. However, this register is specific to the
LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801,
that register (0x19), corresponds to the LED and MAC address
configuration, resulting in unapropriate behavior."

I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800
with the internal PHY.

Fixes: 14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Fix counting when initial delay configured

[ Upstream commit 25f69c69bc3ca8c781a94473f28d443d745768e3 ]

When creating counters with initial delay configured, the enable_on_exec
field is not set. So we need to enable the counters later. The problem
is, when a workload is specified the target__none() is true. So we also
need to check stat_config.initial_delay.

In this change, we add a new field 'initial_delay' for struct target
which could be shared by other subcommands. And define
target__enable_on_exec() which returns whether enable_on_exec should be
set on normal cases.

Before this fix the event is not counted:

  $ ./perf stat -e instructions -D 100 sleep 2
  Events disabled
  Events enabled

   Performance counter stats for 'sleep 2':

       <not counted>      instructions

         1.901661124 seconds time elapsed

         0.001602000 seconds user
         0.000000000 seconds sys

After fix it works:

  $ ./perf stat -e instructions -D 100 sleep 2
  Events disabled
  Events enabled

   Performance counter stats for 'sleep 2':

             404,214      instructions

         1.901743475 seconds time elapsed

         0.001617000 seconds user
         0.000000000 seconds sys

Fixes: c587e77e100fa40e ("perf stat: Do not delay the workload with --delay")
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hui Wang <hw.huiwang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230302031146.2801588-2-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: use indirect calls helpers for sk_exit_memory_pressure()

[ Upstream commit 5c1ebbfabcd61142a4551bfc0e51840f9bdae7af ]

Florian reported a regression and sent a patch with the following
changelog:

<quote>
 There is a noticeable tcp performance regression (loopback or cross-netns),
 seen with iperf3 -Z (sendfile mode) when generic retpolines are needed.

 With SK_RECLAIM_THRESHOLD checks gone number of calls to enter/leave
 memory pressure happen much more often. For TCP indirect calls are
 used.

 We can't remove the if-set-return short-circuit check in
 tcp_enter_memory_pressure because there are callers other than
 sk_enter_memory_pressure.  Doing a check in the sk wrapper too
 reduces the indirect calls enough to recover some performance.

 Before,
 0.00-60.00  sec   322 GBytes  46.1 Gbits/sec                  receiver

 After:
 0.00-60.04  sec   359 GBytes  51.4 Gbits/sec                  receiver

 "iperf3 -c $peer -t 60 -Z -f g", connected via veth in another netns.
</quote>

It seems we forgot to upstream this indirect call mitigation we
had for years, lets do this instead.

[edumazet] - It seems we forgot to upstream this indirect call
             mitigation we had for years, let's do this instead.
           - Changed to INDIRECT_CALL_INET_1() to avoid bots reports.

Fixes: 4890b686f408 ("net: keep sk->sk_forward_alloc as small as possible")
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/netdev/20230227152741.4a53634b@kernel.org/T/
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230301133247.2346111-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tls: fix possible race condition between do_tls_getsockopt_conf() and do_tls_setsockopt_conf()

[ Upstream commit 49c47cc21b5b7a3d8deb18fc57b0aa2ab1286962 ]

ctx->crypto_send.info is not protected by lock_sock in
do_tls_getsockopt_conf(). A race condition between do_tls_getsockopt_conf()
and error paths of do_tls_setsockopt_conf() may lead to a use-after-free
or null-deref.

More discussion:  https://lore.kernel.org/all/Y/ht6gQL+u6fj3dG@hog/

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20230228023344.9623-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_quota: copy content when cloning expression

[ Upstream commit aabef97a35160461e9c576848ded737558d89055 ]

If the ruleset contains consumed quota, restore them accordingly.
Otherwise, listing after restoration shows never used items.

Restore the user-defined quota and flags too.

Fixes: ed0a0c60f0e5 ("netfilter: nft_quota: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_last: copy content when cloning expression

[ Upstream commit 860e874290fb3be08e966c9c8ffc510c5b0f2bd8 ]

If the ruleset contains last timestamps, restore them accordingly.
Otherwise, listing after restoration shows never used items.

Fixes: 33a24de37e81 ("netfilter: nft_last: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: nft_nat: ensuring the listening side is up before starting the client

[ Upstream commit 2067e7a00aa604b94de31d64f29b8893b1696f26 ]

The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.

Before the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
  2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
  ERROR: inet port rewrite

After the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
  PASS: inet port rewrite without l3 address

Fixes: 282e5f8fe907 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lan966x: Fix port police support using tc-matchall

[ Upstream commit 81563d8548b0478075c720666be348d4199b8591 ]

When the police was removed from the port, then it was trying to
remove the police from the police id and not from the actual
police index.
The police id represents the id of the police and police index
represents the position in HW where the police is situated.
The port police id can be any number while the port police index
is a number based on the port chip port.
Fix this by deleting the police from HW that is situated at the
police index and not police id.

Fixes: 5390334b59a3 ("net: lan966x: Add port police support using tc-matchall")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()

[ Upstream commit 693aa2c0d9b6d5b1f2745d31b6e70d09dbbaf06e ]

ila_xlat_nl_cmd_get_mapping() generates an empty skb,
triggerring a recent sanity check [1].

Instead, return an error code, so that user space
can get it.

[1]
skb_assert_len
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline]
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
Modules linked in:
CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_assert_len include/linux/skbuff.h:2527 [inline]
pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
lr : skb_assert_len include/linux/skbuff.h:2527 [inline]
lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
sp : ffff80001e0d6c40
x29: ffff80001e0d6e60 x28: dfff800000000000 x27: ffff0000c86328c0
x26: dfff800000000000 x25: ffff0000c8632990 x24: ffff0000c8632a00
x23: 0000000000000000 x22: 1fffe000190c6542 x21: ffff0000c8632a10
x20: ffff0000c8632a00 x19: ffff80001856e000 x18: ffff80001e0d5fc0
x17: 0000000000000000 x16: ffff80001235d16c x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001
x11: ff80800008353a30 x10: 0000000000000000 x9 : 21567eaf25bfb600
x8 : 21567eaf25bfb600 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff80001e0d6558 x4 : ffff800015c74760 x3 : ffff800008596744
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000000e
Call trace:
skb_assert_len include/linux/skbuff.h:2527 [inline]
__dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
dev_queue_xmit include/linux/netdevice.h:3033 [inline]
__netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline]
__netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325
netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338
__netlink_sendskb net/netlink/af_netlink.c:1283 [inline]
netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292
netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380
nlmsg_unicast include/net/netlink.h:1099 [inline]
genlmsg_unicast include/net/genetlink.h:433 [inline]
genlmsg_reply include/net/genetlink.h:443 [inline]
ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x558/0x844 net/socket.c:2479
___sys_sendmsg net/socket.c:2533 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2562
__do_sys_sendmsg net/socket.c:2571 [inline]
__se_sys_sendmsg net/socket.c:2569 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
irq event stamp: 136484
hardirqs last enabled at (136483): [<ffff800008350244>] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345
hardirqs last disabled at (136484): [<ffff800012358d60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405
softirqs last enabled at (136418): [<ffff800008020ea8>] softirq_handle_end kernel/softirq.c:414 [inline]
softirqs last enabled at (136418): [<ffff800008020ea8>] __do_softirq+0xd4c/0xfa4 kernel/softirq.c:600
softirqs last disabled at (136371): [<ffff80000802b4a4>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80
---[ end trace 0000000000000000 ]---
skb len=0 headroom=0 headlen=0 tailroom=192
mac=(0,0) net=(0,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0010 pkttype=6 iif=0
dev name=nlmon0 feat=0x0000000000005861

Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: disable features unsupported by QCM2290

[ Upstream commit a2a448b4d9bcb5bff0e0f687b7932a7be9ca898a ]

QCM2290 doesn't seem to support reg-dma, UBWC and CSC. Drop
corresponding features being incorrectly enabled for qcm2290.

Cc: Loic Poulain <loic.poulain@linaro.org>
Fixes: 5334087ee743 ("drm/msm: add support for QCM2290 MDSS")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522209/
Link: https://lore.kernel.org/r/20230211231259.1308718-3-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tls: rx: fix return value for async crypto

[ Upstream commit 4d42cd6bc2ac1b9be50ade13771daec90c9d18b1 ]

Gaurav reports that TLS Rx is broken with async crypto
accelerators. The commit under fixes missed updating
the retval byte counting logic when updating how records
are stored. Even tho both before and after the change
'decrypted' was updated inside the main loop, it was
completely overwritten when processing the async
completions. Now that the rx_list only holds
non-zero-copy records we need to add, not overwrite.

Reported-and-bisected-by: Gaurav Jain <gaurav.jain@nxp.com>
Fixes: cbbdee9918a2 ("tls: rx: async: don't put async zc on the list")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217064
Tested-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227181201.1793772-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: dts: t1040rdb: fix compatible string for Rev A boards

[ Upstream commit ae44f1c9d1fc54aeceb335fedb1e73b2c3ee4561 ]

It looks like U-Boot fails to start the kernel properly when the
compatible string of the board isn't fsl,T1040RDB, so stop overriding it
from the rev-a.dts.

Fixes: 5ebb74749202 ("powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>