Andrew Scull [Mon, 16 May 2022 10:41:40 +0000 (10:41 +0000)]
test: dm: virtio_rng: Test virtio-rng with faked device
Add a regression test for virtio-rng reading beyond the end of its
buffer if the virtio device provides an invalid length.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:39 +0000 (10:41 +0000)]
virtio: rng: Check length before copying
Check the length of data written by the device is consistent with the
size of the buffers to avoid out-of-bounds memory accesses in case
values aren't consistent.
Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:38 +0000 (10:41 +0000)]
test: dm: virtio: Test virtio device driver probing
Once the virtio-rng driver has been bound, probe it to trigger the pre
and post child probe hooks of the virtio uclass driver. Check the status
of the virtio device to confirm it reached the expected state.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:37 +0000 (10:41 +0000)]
virtio: sandbox: Bind RNG rather than block device
The virtio-rng driver is extremely simple, making it suitable for
testing more of the virtio uclass logic. Have the sandbox driver bind
the virtio-rng driver rather than the virtio-blk driver so it can be
used in tests.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:36 +0000 (10:41 +0000)]
test: dm: virtio: Split out virtio device tests
Virtio tests that find a child device require the virtio device driver
to be included in the build so it can probe. The sandbox virtio
transport driver currently reports a virtio-blk device so make sure the
corresponding driver is built before running tests that need it.
Signed-off-by: Andrew Scull <ascull@google.com>
Andrew Scull [Mon, 16 May 2022 10:41:35 +0000 (10:41 +0000)]
test: dm: virtio: Test notify before del_vqs
The virtqueue is passed to virtio_notify() so move the virtqueue
deletion to the end of the test when it's no longer needed. This wasn't
causing any problems because the sandbox virtio transport driver doesn't
do anything for notifications, but it could cause problems if things
change and it was a bad example.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:34 +0000 (10:41 +0000)]
virtio: sandbox: Fix device features bitfield
The virtio sandbox transport was setting the device features value to
the bit index rather than shifting a bit to the right index. Fix this
using the bit manipulation macros.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:33 +0000 (10:41 +0000)]
dm: test: virtio: Test the virtio ring
The virtio ring is the basis of virtio communication. Test its basic
functionality and its resilience against corruption from the device.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:32 +0000 (10:41 +0000)]
virtio_ring: Check used descriptors are chain heads
When the device returns used buffers, it should refer to the descriptor
that is the head of the descriptor chain for that buffer. Confirm this
to be the case by tracking the head of descriptor chains that have been
made available to the device.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:31 +0000 (10:41 +0000)]
virtio_ring: Maintain a shadow copy of descriptors
The shared descriptors should only be written by the guest driver,
however, the device is still able to overwrite and corrupt them.
Maintain a private shadow copy of the descriptors for the driver to
use for state tracking, removing the need to read from the shared
descriptors.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:30 +0000 (10:41 +0000)]
virtio_ring: Add helper to attach vring descriptor
Move the logic for attaching a descriptor to its own function.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andrew Scull [Mon, 16 May 2022 10:41:29 +0000 (10:41 +0000)]
virtio_ring: Merge identical variables
The variables `total_sg` and `descs_used` have the same value. Replace
the few uses of `total_sg` with `descs_used` to simplify the situation.
Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Tue, 7 Jun 2022 16:21:57 +0000 (12:21 -0400)]
Merge branch '2022-06-07-assorted-improvements' into next
- A wide ranging set of minor clean-ups and improvements
Pali Rohár [Fri, 27 May 2022 20:15:24 +0000 (22:15 +0200)]
serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE)
CONFIG_VAL(DEBUG_UART_BASE) expands to CONFIG_DEBUG_UART_BASE or
CONFIG_SPL_DEBUG_UART_BASE or CONFIG_TPL_DEBUG_UART_BASE and allows boards
to set different values for SPL, TPL and U-Boot Proper.
For ns16550 driver this support is there since commit
d293759d55cc
("serial: ns16550: Add support for SPL_DEBUG_UART_BASE").
Signed-off-by: Pali Rohár <pali@kernel.org>
Pierre-Clément Tosi [Wed, 25 May 2022 13:38:55 +0000 (14:38 +0100)]
qfw: Don't fail if setup data size is 0
Skip missing setup data (which is valid) rather than failing with an
error.
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reported-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Pali Rohár [Mon, 23 May 2022 20:50:36 +0000 (22:50 +0200)]
ubifs: Add missing dependency on GZIP
GZIP option can be manually de-selected when UBIFS is enabled. This cause
following compile error because ubifs calls gzip functions.
/tmp/ccxVrh2c.ltrans1.ltrans.o: in function `gzip_decompress.lto_priv.566':
<artificial>:(.text+0x768): undefined reference to `zunzip'
collect2: error: ld returned 1 exit status
make: *** [Makefile:1813: u-boot] Error 1
So add missing dependency on GZIP.
Signed-off-by: Pali Rohár <pali@kernel.org>
Michael Trimarchi [Sun, 22 May 2022 13:22:08 +0000 (15:22 +0200)]
include/configs: Remove rootwait=1 to all the affected boards
rootwait=1 is not a valid kernel boot parameters. According
to the documenation is only rootwait
rootwait [KNL] Wait (indefinitely) for root device to show up.
Useful for devices that are detected asynchronously
(e.g. USB and MMC devices).
Fix:
Unknown kernel command line parameters "rootwait=1", will be passed to user space.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Rasmus Villemoes [Fri, 20 May 2022 11:19:08 +0000 (13:19 +0200)]
common/board_r.c: drop legacy and unused bi_enetaddr
The bi_enetaddr field in struct bd_info is write-only; nothing ever
reads back the value.
Moreover, the value we write is more or less random, and certainly not
something one can rely on: If the board has a writable environment and
the mac address has been stored there, we fetch that value. But if the
board doesn't, this code runs before initr_net() -> eth_initialize(),
and thus before the code in eth-uclass which fetches MAC addresses
from eeprom, fuses or whatnot and populates the (run-time) environment
with those values.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Sean Anderson [Thu, 19 May 2022 22:26:05 +0000 (18:26 -0400)]
bootm: Fix Linux silent console on newer kernels
Linux determines its console based on several sources:
1. the console command line parameter
2. device tree (e.g. /chosen/stdout-path)
3. various other board- and arch-specific sources
If the console parameter specifies a real console (e.g. ttyS0) then that is
used as /dev/console. However, if it does not specify a real console (e.g.
ttyDoesntExist) then *nothing* will be used as /dev/console.
Reading/writing it will return ENODEV. Additionally, no other source will
be used as a console source.
Linux commit
ab4af56ae250 ("printk/console: Allow to disable console output
by using console="" or console=null") recently changed the semantics of the
parameter. Previously, specifying console="" would be treated like
specifying some other bad console. This commit changed things so that it
added /dev/ttynull as a console (if available). However, it also allows
for other console sources. If the device tree specifies a console (such as
if U-Boot and Linux share a device tree), then it will be used in addition
to /dev/ttynull. This can result in a non-silent console.
To avoid this, explicitly set ttynull as the console. This will disable
other console sources. If CONFIG_NULL_TTY is disabled, then this will have
the same behavior as in the past (no output, and writing /dev/console
returns ENODEV).
[1] and [2] have additional background on this kernel change.
[1] https://lore.kernel.org/all/
20201006025935.GA597@jagdpanzerIV.localdomain/
[2] https://lore.kernel.org/all/
20201111135450.11214-1-pmladek@suse.com/
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Pierre-Clément Tosi [Thu, 19 May 2022 16:48:30 +0000 (17:48 +0100)]
pci: Handle failed calloc in decode_regions()
Add a check for calloc() failing to allocate the requested memory.
Make decode_regions() return an error code.
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Rasmus Villemoes [Thu, 19 May 2022 09:10:43 +0000 (11:10 +0200)]
fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ
Asking if the alias we found actually points at the device tree node
we passed in (in the guise of its offset from blob) can be done simply
by asking if the fdt_path_offset() of the alias' path is identical to
offset.
In fact, the current method suffers from the possibility of false
negatives: dtc does not necessarily emit a phandle property for a node
just because it is referenced in /aliases; it only emits a phandle
property for a node if it is referenced in <angle brackets>
somewhere. So if both the node we passed in and the alias node we're
considering don't have phandles, fdt_get_phandle() returns 0 for both.
Since the proper check is so simple, there's no reason to hide that
behind a config option (and if one really wanted that, it should be
called something else because there's no need to involve phandle in
the check).
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Judy Wang [Tue, 3 May 2022 06:04:40 +0000 (14:04 +0800)]
drivers:optee:rpmb: initialize drivers of mmc devices in UCLASS_BLK for rpmb access
CONFIG_MMC only initializes drivers for devices in UCLASS_MMC, we need
to initialize drivers for devices of type IF_TYPE_MMC in UCLASS_BLK as
well because they are the child devices of devices in UCLASS_MMC. This
is required for feature RPMB since it will access eMMC in optee-os.
Signed-off-by: Judy Wang <wangjudy@microsoft.com>
[trini: Add my SoB line and adjust Judy's name in git, having emailed
off-list]
Signed-off-by: Tom Rini <trini@konsulko.com>
Sean Anderson [Tue, 17 May 2022 17:55:07 +0000 (13:55 -0400)]
serial: smh: Fake tstc
ARM semihosting provides no provisions for determining if there is
pending input. The only way to determine if there is console input is to
do a read (and block until the user types something). For this reason,
we always return true for tstc (since you will always get input if you
try). However, this behavior can cause problems for code which expects
tstc to eventually be empty. In query_console_serial, there is the
following construct:
/* empty input buffer */
while (tstc())
getchar();
with the current implementation, this effectively turns into an infinite
loop. To avoid this, fake tstc by returning false half of the time. This
is generally OK because the other common construct looks like
do {
if (tstc())
process(getchar());
} while (!timeout());
so it's fine if we only read a new character every other loop. This will
break things like CYGACC_COMM_IF_GETC_TIMEOUT, but that could be
reworked to test on the timeout instead of calling tstc again (and
ymodem over semihosted serial is not that useful in the first place).
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Patrick Delaunay [Tue, 17 May 2022 12:37:05 +0000 (14:37 +0200)]
dm: core: convert of_machine_is_compatible to livetree
Replace in the function of_machine_is_compatible(), the used API
fdt_node_check_compatible() by ofnode_device_is_compatible()
to support a live tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Sean Anderson [Mon, 16 May 2022 20:11:08 +0000 (16:11 -0400)]
mkimage: Support signing 'auto' FITs
This adds support for signing images in auto-generated FITs. To do this,
we need to add a signature node. The algorithm name property already has
its own option, but we need one for the key name hint. We could have
gone the -G route and added an explicit name for the public key (like
what is done for the private key). However, many places assume the
public key can be constructed from the key dir and hint, and I don't
want to do the refactoring necessary.
As a consequence of this, it is now easier to add public keys to an
existing image without signing something. This could be done all along,
but now you don't have to create an its just to do it. Ideally, we
wouldn't create a FIT at the end. This could be done by calling
fit_image_setup_sig/info.crypto->add_verify_data directly.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Sean Anderson [Mon, 16 May 2022 20:11:07 +0000 (16:11 -0400)]
mkimage: Document more misc options
Document -G and the secondary image types which can be used with -R.
Also reword the documentation of -s for clarity.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Ovidiu Panait [Sun, 15 May 2022 18:40:29 +0000 (21:40 +0300)]
event: fix static events for CONFIG_NEEDS_MANUAL_RELOC
Static events do not currently work post-relocation for boards that enable
CONFIG_NEEDS_MANUAL_RELOC. Relocate event handler pointers for all event
spies to fix this.
Tested on Microblaze.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Ovidiu Panait [Sun, 15 May 2022 18:40:28 +0000 (21:40 +0300)]
event: remove CONFIG_EVENT_DYNAMIC check in event_register()
The whole event_register() function is wrapped in EVENT_DYNAMIC #ifdef
checks, so the inner check is not needed:
#if CONFIG_IS_ENABLED(EVENT_DYNAMIC)
...
int event_register(...)
{
...
if (!CONFIG_IS_ENABLED(EVENT_DYNAMIC))
return -ENOSYS;
}
#endif
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Pali Rohár [Fri, 13 May 2022 20:24:51 +0000 (22:24 +0200)]
mtd: mtdpart: Change size type from fdt_addr_t to fdt_size_t
Set correct type for 3rd argument of ofnode_get_addr_size_index_notrans()
function. It expects fdt_size_t * and not fdt_addr_t *.
When these two types do not have same size then U-Boot throw compile
warning:
drivers/mtd/mtdpart.c: In function ‘add_mtd_partitions_of’:
drivers/mtd/mtdpart.c:906:57: warning: passing argument 3 of ‘ofnode_get_addr_size_index_notrans’ from incompatible pointer type [-Wincompatible-pointer-types]
offset = ofnode_get_addr_size_index_notrans(child, 0, &size);
^~~~~
In file included from include/dm/device.h:13,
from include/linux/mtd/mtd.h:26,
from include/ubi_uboot.h:28,
from drivers/mtd/mtdpart.c:27:
include/dm/ofnode.h:530:25: note: expected ‘fdt_size_t *’ {aka ‘long long unsigned int *’} but argument is of type ‘fdt_addr_t *’ {aka ‘long unsigned int *’}
fdt_size_t *size);
~~~~~~~~~~~~^~~~
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Pierre-Clément Tosi [Wed, 11 May 2022 09:36:07 +0000 (10:36 +0100)]
scripts: Introduce {quiet_,}cmd_bin2c
Add a make command to compile binary files as C data through bin2c with
$(call,bin2c,<data_name_prefix>)
Note that this requires BUILD_BIN2C=y.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Heinrich Schuchardt [Tue, 10 May 2022 19:53:25 +0000 (21:53 +0200)]
fs/squashfs: fix sqfs_read_sblk()
Setting sblk = NULL has no effect on the caller.
We want to set *sblk = NULL if an error occurrs to avoid usage after free.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Tue, 10 May 2022 19:43:38 +0000 (21:43 +0200)]
btrfs: simplify lookup_data_extent()
After returning if ret <= 0 we know that ret > 0. No need to check it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain>
Tom Rini [Tue, 10 May 2022 18:36:59 +0000 (14:36 -0400)]
zlib: Port fix for CVE-2018-25032 to U-Boot
While our copy of zlib is missing upstream commit
263b1a05b04e ("Allow
deflatePrime() to insert bits in the middle of a stream.") we do have
Z_FIXED support, and so the majority of the code changes in
5c44459c3b28
("Fix a bug that can crash deflate on some input when using Z_FIXED.")
apply here directly and cleanly. As this has been assigned a CVE, lets
go and apply these changes.
Link: https://github.com/madler/zlib/commit/5c44459c3b28a9bd3283aaceab7c615f8020c531
Reported-by: "Gan, Yau Wai" <yau.wai.gan@intel.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 10 May 2022 16:51:47 +0000 (12:51 -0400)]
misc: Correct Kconfig dependencies for a number of options
We have many cases of SPL (or TPL or VPL) drivers that don't depend on
SPL_MISC (and so on) but rather just MISC.
Cc: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Chris Packham [Mon, 9 May 2022 21:58:28 +0000 (09:58 +1200)]
doc: regulator: Add regulator-force-boot-off binding
The actual support was added in commit
fec8c900c8b2 ("power: regulator:
Add support for regulator-force-boot-off"), update the docs to include
this.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Ovidiu Panait [Sun, 8 May 2022 10:01:42 +0000 (13:01 +0300)]
cmd: dm: migrate dm command to use U_BOOT_CMD_WITH_SUBCMDS()
Migrate dm command to use U_BOOT_CMD_WITH_SUBCMDS() helper macro, to reduce
duplicated code. We can also drop the CONFIG_NEEDS_MANUAL_RELOC exception,
as the command list is updated post relocation in board_r.c initcall
initr_manual_reloc_cmdtable().
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Heinrich Schuchardt [Sat, 7 May 2022 20:39:01 +0000 (22:39 +0200)]
dm: fix DM_EVENT dependencies
CONFIG_DM_EVENT without CONFIG_EVENT is non-functional.
Let CONFIG_DM_EVENT depend on CONFIG_EVENT.
Remove superfluous stub in include/event.h.
Fixes:
5b896ed5856f ("event: Add events for device probe/remove")
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Peng Fan [Sat, 7 May 2022 13:23:05 +0000 (21:23 +0800)]
boot: image-pre-load: drop unused CONFIG_SYS_BOOTM_LEN
CONFIG_SYS_BOOTM_LEN is not used in this file, drop it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 6 Jun 2022 16:13:29 +0000 (12:13 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 6 Jun 2022 16:09:41 +0000 (12:09 -0400)]
Merge branch '2022-06-06-finish-SPL-Kconfig-migration' into next
- Bring in a number of series of patches that migrate all remaining
CONFIG_SPL symbols to Kconfig, remove some dead code that this
uncovered and then start to tighten the dependencies in Kconfig now
that everything is migrated and these relationships can be clearly
expressed.
Tom Rini [Tue, 31 May 2022 14:24:55 +0000 (10:24 -0400)]
spl: Rework and tighten some dependencies
- In a few places, add missing "depends on" that can be implied from the
option name (i.e. SPL_DM_xxx depends on SPL_DM).
- Make less use of "if SPL_xxx ... endif" clauses as most of the time
this reads better as depends on. In the case of UBI however, move it
all to a sub-menu.
- Rework SPL_NO_CPU_SUPPORT as it's very specific to the
non-SPL_FRAMEWORK implementation used on those platforms, and a
tangent to how CONFIG_SPL_START_S_PATH was used.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 30 May 2022 21:11:23 +0000 (17:11 -0400)]
spl: Rework Kconfig to be more menu driven
Make it so that all of SPL, TPL and VPL are proper menus hidden behind a
gating question.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 30 May 2022 21:01:22 +0000 (17:01 -0400)]
spl: Move all VPL, TPL and PowerPC specific CONFIG options to separate files
- Move all PowerPC (and some shared with Layerscape) options to
common/spl/Kconfig.nxp
- Move all other TPL related options to common/spl/Kconfig.tpl
- Move all VPL related options to common/spl/Kconfig.vpl
This makes the whole of common/spl/Kconfig slightly more readable.
Signed-off-by: Tom Rini <trini@konsulko.com>
Chris Packham [Sat, 28 May 2022 23:13:18 +0000 (11:13 +1200)]
arm: mvebu: Remove CONFIG_SPL_BOOT_DEVICE
CONFIG_SPL_BOOT_DEVICE was made obsolete by
CONFIG_MVEBU_SPL_BOOT_DEVICE_{SPI,MMC,SATA,UART}.
CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI is the default so existing users of
CONFIG_SPL_BOOT_DEVICE can simply have the option removed.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Chris Packham [Sat, 28 May 2022 23:13:17 +0000 (11:13 +1200)]
Convert CONFIG_FIXED_SDHCI_ALIGNED_BUFFER to Kconfig
CONFIG_FIXED_SDHCI_ALIGNED_BUFFER is needed on some Marvell SoCs when
booting from MMC. All existing usages of this have the same value so
make this the default and have the Kconfig option depend on SPL &&
MVEBU_SPL_BOOT_DEVICE_MMC.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Chris Packham [Sat, 28 May 2022 23:13:16 +0000 (11:13 +1200)]
arm: mvebu: Use MVEBU_SPL_BOOT_DEVICE instead of SPL_BOOT_DEVICE
Update the way KWB_CFG_SEC_BOOT_DEV is determined to use
CONFIG_MVEBU_SPL_BOOT_DEVICE_{SPI,MMC} instead of
CONFIG_SPL_BOOT_DEVICE.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tom Rini [Sun, 29 May 2022 13:34:42 +0000 (09:34 -0400)]
riotboard, syzygy_hub: Disable SPL_FALCON_BOOT_MMCSD
Looking at the git history and values used for the raw kernel/args
location, it's clear these platforms only ever did Falcon Mode via
filesystem images and not raw MMC/SD locations. Disable
CONFIG_SPL_FALCON_BOOT_MMCSD.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 28 May 2022 21:21:03 +0000 (17:21 -0400)]
Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 28 May 2022 20:43:53 +0000 (16:43 -0400)]
Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_NAND_SPL_KERNEL_OFFS
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 28 May 2022 16:40:40 +0000 (12:40 -0400)]
spl: Remove CONFIG_SPL_START_S_PATH and rework the logic behind it
In some cases, when we don't use CONFIG_SPL_FRAMEWORK nor are we on
PowerPC using their specific SPL/TPL framework, we need to specify the
start.S file to use for these typically very constrained systems. Do
this within the Makefile logic, rather than introducing a string-based
CONFIG option, as this would get slightly complex to do in Kconfig for a
very limited number of users.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 28 May 2022 16:07:26 +0000 (12:07 -0400)]
Drop CONFIG_SPL_SIZE
We do not reference CONFIG_SPL_SIZE in the code, remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 28 May 2022 13:13:59 +0000 (09:13 -0400)]
ax25-ae350: Move CONFIG_SYS_FDT_BASE to Kconfig
The address where the device tree will be passed in to U-Boot at is now
moved to the Kconfig file. If this is user configurable, it needs to be
exposed rather than hidden, and should probably be renamed as well.
Reviewed-by: Rick Chen <rick@andestech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 28 May 2022 02:06:52 +0000 (22:06 -0400)]
Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_SPL_ARGS_ADDR
In doing so, we also consistently use this variable for SPL_OS_BOOT and
not CONFIG_SYS_FDT_BASE in some cases.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 27 May 2022 21:13:52 +0000 (17:13 -0400)]
Convert CONFIG_SPL_TARGET to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_TARGET
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 27 May 2022 20:56:13 +0000 (16:56 -0400)]
Remove CONFIG_SPL_STACK_SIZE
This is not used anywhere, drop it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 27 May 2022 20:34:14 +0000 (16:34 -0400)]
Drop CONFIG_SPL_SPI_FLASH_MINIMAL
There are no users of CONFIG_SPL_SPI_FLASH_MINIMAL only platforms
defining it, drop it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 27 May 2022 20:19:05 +0000 (16:19 -0400)]
Convert CONFIG_SPL_GD_ADDR to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_GD_ADDR
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 27 May 2022 19:20:11 +0000 (15:20 -0400)]
etamin: Remove CONFIG_SPL_CMT defines
These are presumably private to non-upstream code, remove.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 27 May 2022 19:18:06 +0000 (15:18 -0400)]
Remove CONFIG_SYS_SPL_LEN largely
This is mostly unused. In the case where it is currently used, it means
the same as CONFIG_SPL_PAD_TO, which is already set for the platform.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 27 May 2022 16:48:32 +0000 (12:48 -0400)]
Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_SPL_MALLOC_SIZE
CONFIG_SYS_SPL_MALLOC_START
We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to
control if we have a malloc pool or not.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 27 May 2022 14:19:45 +0000 (10:19 -0400)]
Convert CONFIG_SPL_BSS_START_ADDR to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_BSS_START_ADDR
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 26 May 2022 20:59:30 +0000 (16:59 -0400)]
Convert CONFIG_SPL_RELOC_TEXT_BASE et al to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_RELOC_TEXT_BASE
CONFIG_SPL_RELOC_STACK
CONFIG_SPL_RELOC_MALLOC_ADDR
CONFIG_SPL_RELOC_MALLOC_SIZE
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 26 May 2022 18:31:57 +0000 (14:31 -0400)]
Convert CONFIG_TPL_NAND_INIT to Kconfig
This converts the following to Kconfig:
CONFIG_TPL_NAND_INIT
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 26 May 2022 17:46:32 +0000 (13:46 -0400)]
imx7: Update CONFIG_SPL_STACK defaults in Kconfig
Update the Kconfig entry to have the correct defaults for i.MX7
platforms, and move the existing large comment from imx7_spl.h to
doc/imx/common/imx7.txt so that it's not lost.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 26 May 2022 17:36:17 +0000 (13:36 -0400)]
imx6: Update CONFIG_SPL_STACK defaults in Kconfig
Update the Kconfig entry to have the correct defaults for i.MX6
platforms, and move the existing large comment from imx6_spl.h to
doc/imx/common/imx6.txt so that it's not lost.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 26 May 2022 17:13:21 +0000 (13:13 -0400)]
Convert CONFIG_SPL_STACK to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_STACK
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 25 May 2022 16:16:03 +0000 (12:16 -0400)]
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
board config header files.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 25 May 2022 14:16:18 +0000 (10:16 -0400)]
Introduce include/system-constants.h
We have a number of CONFIG symbols today that are of the form:
SYM1 = CONST1 + CONST2
or other static math operations (shifts, etc). The issue is that by
moving these to Kconfig we no longer have the ability to calculate these
values, so they become less flexible and useful. It's also the case
that sometimes a platform will just define SYM1 directly or perform a
slightly different set of calculations. We introduce this header now to
have a place to start to handle these cases.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 24 May 2022 18:18:11 +0000 (14:18 -0400)]
stih410-b2260: Switch to using GENERATED_GBL_DATA_SIZE
We have GENERATED_GBL_DATA_SIZE to tell us how large the generated
global data is, so do not use a hard-coded value of 1024 for it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 24 May 2022 18:14:02 +0000 (14:14 -0400)]
powerpc: Switch to using CONFIG_SYS_INIT_SP_OFFSET from CONFIG_SYS_GBL_DATA_OFFSET
In the places where PowerPC references CONFIG_SYS_GBL_DATA_OFFSET it
does so as (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET). And
it defines CONFIG_SYS_GBL_DATA_OFFSET in the same manner that other
architectures define CONFIG_SYS_INIT_SP_OFFSET. Other architectures
define CONFIG_SYS_INIT_SP_ADDR as (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_INIT_SP_OFFSET) typically. Rename things within PowerPC for
consistency with other architectures.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 24 May 2022 17:49:56 +0000 (13:49 -0400)]
mpc85xx: Switch to setting the initial stack pointer more clearly
Currently, since we know that in the combination of
CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET all of the "high"
bits are in CONFIG_SYS_INIT_RAM_ADDR and "low" bits are in
CONFIG_SYS_GBL_DATA_OFFSET we reference this separately in start.S, but
added together everywhere else. For clarity consistency, reference the
combined value here instead.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 24 May 2022 17:40:05 +0000 (13:40 -0400)]
m68k: Stop using CONFIG_SYS_GBL_DATA_OFFSET
This value is only referenced by PowerPC code in a way other than
directly as CONFIG_SYS_INIT_SP_ADDR. Switch to CONFIG_SYS_INIT_SP_ADDR
directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 24 May 2022 17:23:40 +0000 (13:23 -0400)]
arm: Stop using CONFIG_SYS_GBL_DATA_OFFSET
This value is only referenced by PowerPC code in a way other than
directly as CONFIG_SYS_INIT_SP_ADDR. Switch to CONFIG_SYS_INIT_SP_ADDR
directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 24 May 2022 17:11:41 +0000 (13:11 -0400)]
arm: Use CONFIG_SPL_STACK or CONFIG_SYS_INIT_SP_ADDR directly.
In some cases, we define CONFIG_SYS_INIT_SP_ADDR differently for SPL or
full U-Boot. This case should be making use of CONFIG_SPL_STACK, as
that's what that variable is for. In a few other cases we define
CONFIG_SPL_STACK directly to CONFIG_SYS_INIT_SP_ADDR, but do not need to
as the code handles this correctly, normally.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 24 May 2022 13:57:18 +0000 (09:57 -0400)]
mvebu: Use CONFIG_SPL_STACK + 4 directly for bootparam location
The definition of CONFIG_SPL_BOOTROM_SAVE is always a fixed
CONFIG_SPL_STACK + 4, while CONFIG_SPL_STACK is not constant. This
change will make it clear where the location is still, once
CONFIG_SPL_STACK moves to Kconfig.
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 25 May 2022 20:13:48 +0000 (16:13 -0400)]
arm: pxa: Remove CONFIG_CPU_PXA25X
There are no platforms that set this, remove the code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 25 May 2022 19:11:18 +0000 (15:11 -0400)]
m68k: Remove dead code
There are no mcf5227x platforms, remove the CPU code.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 21 May 2022 18:44:28 +0000 (14:44 -0400)]
Convert CONFIG_SPL_COMMON_INIT_DDR to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_COMMON_INIT_DDR
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 21 May 2022 15:26:27 +0000 (11:26 -0400)]
ppc / layerscape: Clean up CONFIG_SYS_CCSR_DO_NOT_RELOCATE usage
A number of PowerPC platforms define this, for SPL. To move this to
Kconfig, it needs to be CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE, so use
CONFIG_IS_ENABLED() to check for usage. A number of layerscape
platforms bring this logic from PowerPC, but only need a small part of
it, for the fman driver. Remove their unused portion at least.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 20 May 2022 16:36:05 +0000 (12:36 -0400)]
Convert CONFIG_SPL_SYS_MALLOC_SIMPLE to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_SYS_MALLOC_SIMPLE
The problem here is that a few platforms have been doing:
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MALLOC_SIMPLE
#endif
instead of defining CONFIG_SPL_SYS_MALLOC_SIMPLE directly. Correct this
and update the documentation in a few places to match usage.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 19 May 2022 19:09:22 +0000 (15:09 -0400)]
Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_BSS_MAX_SIZE
CONFIG_SPL_MAX_FOOTPRINT
Note that the da850evm platforms were violating the "only use one" rule
here, and so now hard-code their BSS limit.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 16 May 2022 21:20:26 +0000 (17:20 -0400)]
Convert CONFIG_SPL_PAD_TO et al to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_PAD_TO
CONFIG_SPL_MAX_SIZE
CONFIG_TPL_PAD_TO
CONFIG_TPL_MAX_SIZE
Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the
existing places.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 13 May 2022 21:12:35 +0000 (17:12 -0400)]
Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_FS_LOAD_ARGS_NAME
CONFIG_SPL_FS_LOAD_KERNEL_NAME
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 13 May 2022 16:46:23 +0000 (12:46 -0400)]
Convert CONFIG_SPL_NAND_RAW_ONLY et al to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_NAND_RAW_ONLY
CONFIG_SPL_NAND_SOFTECC
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 13 May 2022 16:26:35 +0000 (12:26 -0400)]
Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_INIT_MINIMAL
CONFIG_SPL_FLUSH_IMAGE
CONFIG_SPL_SKIP_RELOCATE
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 13 May 2022 13:36:03 +0000 (09:36 -0400)]
Convert CONFIG_SYS_CFI_FLASH_STATUS_POLL to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_CFI_FLASH_STATUS_POLL
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 13 May 2022 13:18:27 +0000 (09:18 -0400)]
Convert CONFIG_SYS_FLASH_CFI_WIDTH to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_FLASH_CFI_WIDTH
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 13 May 2022 17:37:30 +0000 (13:37 -0400)]
spl: Remove CONFIG_SPL_SATA_BOOT_DEVICE
This is only referenced in non-SPL_DM cases, of which there are
currently none. Remove this option and slightly re-organize the code is
there is now never an if/else at the start of spl_sata_load_image()
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 13 May 2022 16:42:13 +0000 (12:42 -0400)]
fsl-layerscape: Remove CONFIG_SPL_PBL_PAD
This option is not referenced in code, remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 13 May 2022 16:14:07 +0000 (12:14 -0400)]
P1010RDB: Remove CONFIG_SPL_NAND_MINIMAL
This symbol is not used anywhere, remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 12 May 2022 21:35:40 +0000 (17:35 -0400)]
spl: Remove CONFIG_SPL_BOARD_LOAD_IMAGE
This symbol has been unused in code for some time now, remove
the final references.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 12 May 2022 21:22:26 +0000 (17:22 -0400)]
arm: omap2plus: Move CONFIG_SYS_PTV out of CONFIG namespace
This is always defined to 2, and referenced in two places. Move the
define to <asm/omap_common.h> and make sure the code that uses this
includes that file. Make <asm/arch-omap*/clock.h> not include that
file, as we don't need to be doing so.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 12 May 2022 20:45:08 +0000 (16:45 -0400)]
Convert CONFIG_SYS_BOOTPARAMS_LEN to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_BOOTPARAMS_LEN
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 12 May 2022 20:12:16 +0000 (16:12 -0400)]
Convert CONFIG_HUSH_INIT_VAR to Kconfig
This converts the following to Kconfig:
CONFIG_HUSH_INIT_VAR
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 12 May 2022 14:02:06 +0000 (10:02 -0400)]
Convert CONFIG_SYS_BARGSIZE to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_BARGSIZE
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 11 May 2022 22:01:06 +0000 (18:01 -0400)]
Convert CONFIG_SYS_CBSIZE to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_CBSIZE
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 11 May 2022 21:38:09 +0000 (17:38 -0400)]
Convert CONFIG_SYS_PBSIZE to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_PBSIZE
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 11 May 2022 20:21:06 +0000 (16:21 -0400)]
Convert CONFIG_SYS_MAXARGS to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_MAXARGS
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 6 Jun 2022 14:25:13 +0000 (10:25 -0400)]
Prepare v2022.07-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
Camelia Groza [Thu, 2 Jun 2022 13:47:09 +0000 (16:47 +0300)]
configs: fsl: add missing SYS_FMAN_FW_ADDR defines
Two defconfigs were missed when transitioning the SYS_FMAN_FW_ADDR
symbol to Kconfig. CONFIG_SYS_FMAN_FW_ADDR is currently initialized to
0 by default on these builds, which prevents the firmware from loading.
Add the correct symbols to these defconfigs.
Fixes:
a97a071d10d2b ("configs: fsl: migrate FMAN/QE specific defines to Kconfig")
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>