Sebastian Dröge [Mon, 8 Apr 2013 06:15:15 +0000 (08:15 +0200)]
videoconvert: Allow passthrough for ANY caps features
David Schleef [Sat, 6 Apr 2013 20:00:02 +0000 (13:00 -0700)]
videoscale: set reasonable limits on properties
Properties sharpen, sharpness, and envelope are only useful
near their default values. Decrease ranges to avoid brokenness.
https://bugzilla.gnome.org/show_bug.cgi?id=682171
Stefan Sauer [Fri, 5 Apr 2013 20:03:56 +0000 (22:03 +0200)]
videoscale: set min value to DBL_MIN to avoid a value of 0.0 that would crash
Jose Antonio Santos Cadenas [Thu, 4 Apr 2013 14:32:45 +0000 (16:32 +0200)]
sdp: Set session as permanent (t=0 0) if there is no time information
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=697277
Olivier Crête [Tue, 11 Sep 2012 23:41:31 +0000 (19:41 -0400)]
audiovisualizer: Don't try to sync controller values to invalid timestamp
Wim Taymans [Thu, 4 Apr 2013 16:18:54 +0000 (18:18 +0200)]
oggdemux: don't push on NOT_LINKED pads
If our previous flow return was NOT_LINKED, don't try to push on the pads some
more. If we get a RECONFIGURE event on the pad, try to push on it again.
Wim Taymans [Thu, 4 Apr 2013 13:00:52 +0000 (15:00 +0200)]
decodebin2: forward all sticky events to decodepad
Forward all sticky events to the decodepad before exposing the pads. This makes
sure all sticky events are on the exposed pad.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=696915
Wim Taymans [Thu, 4 Apr 2013 12:53:32 +0000 (14:53 +0200)]
decodebin: debug sticky events on exposed pads
Wim Taymans [Thu, 4 Apr 2013 12:37:15 +0000 (14:37 +0200)]
decodebin2: small cleanup
Take the event from the probe just once.
Wim Taymans [Thu, 4 Apr 2013 10:32:24 +0000 (12:32 +0200)]
rtsp: make local_ip and remote_ip variables
Separate local_ip and remote_ip into separate variables for clarity.
Wim Taymans [Thu, 4 Apr 2013 10:16:47 +0000 (12:16 +0200)]
rtsp: calculate the local ip address in accept
Calculate the local IP address in the accept call. We need to place this IP
address in the GET reply in the X-Server-IP-Address header so that the client
knows where to send the POST to in case of tunneled RTSP. Before this patch
it used the client IP address, which would make the client send the POST request
to itself and fail.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=697092
Matej Knopp [Sat, 30 Mar 2013 16:39:39 +0000 (17:39 +0100)]
videofilter: add caps to pool config
Does not cause problems but it fixes a warning in the log.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=696916
Nicolas Dufresne [Sat, 30 Mar 2013 11:00:35 +0000 (11:00 +0000)]
oggdemux: Allow EOS on timestamp equal to stop/start
Changed the check to a current_time equal to the stop will produce
EOS instead of the next one. Also, segment.start can't be NONE, so removing
this check.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=696899
Jose Antonio Santos Cadenas [Tue, 2 Apr 2013 15:09:48 +0000 (17:09 +0200)]
sdp: Do not assign -1 to an unsigned variable, use 0 instead
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=697162
Jose Antonio Santos Cadenas [Tue, 2 Apr 2013 15:05:36 +0000 (17:05 +0200)]
sdp: If attribute value is emply do not print colon character
See https://bugzilla.gnome.org/show_bug.cgi?id=697162
Jose Antonio Santos Cadenas [Tue, 2 Apr 2013 15:03:38 +0000 (17:03 +0200)]
sdp: Do not add email line by default
As specified in rfc4566 email line is optional
See https://bugzilla.gnome.org/show_bug.cgi?id=697162
Tim-Philipp Müller [Tue, 2 Apr 2013 22:40:13 +0000 (23:40 +0100)]
docs: add since marker for new video API
Tim-Philipp Müller [Tue, 2 Apr 2013 21:50:25 +0000 (22:50 +0100)]
pbutils: add description for TrueHD audio
David Svensson Fors [Thu, 28 Mar 2013 22:02:11 +0000 (23:02 +0100)]
rtsprange: use gst_util_gdouble_to_guint64 in get_seconds
https://bugzilla.gnome.org/show_bug.cgi?id=696818
Matthew Waters [Thu, 14 Mar 2013 00:15:29 +0000 (11:15 +1100)]
visualizer: handle non-existant pool in the default allocation query
gst_query_set_nth_allocation_pool() requires there to be a pool in the
query already. This is not always the case when we get the query from
upstream. Use gst_query_add_allocation_pool() instead in such case.
https://bugzilla.gnome.org/show_bug.cgi?id=681719
Sebastian Dröge [Mon, 1 Apr 2013 08:21:18 +0000 (10:21 +0200)]
video-format: Add GST_VIDEO_CAPS_MAKE_WITH_FEATURES() macro
Sebastian Dröge [Mon, 1 Apr 2013 08:21:00 +0000 (10:21 +0200)]
videometa: Add caps feature #defines for video and GL texture upload meta
Wim Taymans [Sun, 31 Mar 2013 16:54:46 +0000 (18:54 +0200)]
oggdemux: mark keyframes
Use the mapper to set the delta-unit flag.
Tim-Philipp Müller [Sun, 31 Mar 2013 16:37:01 +0000 (17:37 +0100)]
tests: fix some printf format compiler warnings
Wim Taymans [Sun, 31 Mar 2013 16:29:07 +0000 (18:29 +0200)]
videodecoder: always send the new buffer to parse functions
When we get a new buffer, always call the parse function, even if it is a 0
sized buffer. For theora we need to also decode 0 sized buffers.
Ideally we would like to make theoradec be packetized but that fails currently
because of oggdemux and because of the assumptions that the base class makes.
Wim Taymans [Sun, 31 Mar 2013 16:28:09 +0000 (18:28 +0200)]
theoradec: handle empty adapter
Should not be empty but might be when we actually pass and decode the 0 packets
later.
Vincent Penquerc'h [Mon, 25 Feb 2013 10:49:19 +0000 (10:49 +0000)]
theoraenc: do not reset the encoder when we need a keyframe
Instead, remember we need a keyframe, and we will force the encoder
to emit one next time we submit a new frame.
Since libtheora does not have an API to request a keyframe, we reset
the max keyframe interval to 1 temporarily.
This has the advantage that the rate control keeps its history,
and that the encoder won't choose different quant tables or
somesuch, thus requiring new streamheaders (although this is
probably only a theoretical possibility). Should also be a
bit faster than resetting the encoder.
https://bugzilla.gnome.org/show_bug.cgi?id=663350
Wim Taymans [Sun, 31 Mar 2013 11:46:30 +0000 (13:46 +0200)]
audiodecoder: don't make negative timestamp
Clamp timestamp interpollation to 0 to avoid going negative. This should not
happen, really, but until the interpolation is improved this seems better.
Wim Taymans [Sun, 31 Mar 2013 10:55:33 +0000 (12:55 +0200)]
streamsynchronizer: update position for reverse
When doing reverse playback the positino advances from timestamp_end to
timestamp.
Edward Hervey [Thu, 28 Mar 2013 14:20:19 +0000 (15:20 +0100)]
encodebin: Add action signal to get pad for a given profile
This allows getting a pad for a specific encoding profile, which can
be useful when there are several stream profiles of the same type.
Also update the encodebin unit tests so that we check that the returned
pad has the right caps.
https://bugzilla.gnome.org/show_bug.cgi?id=689845
Wim Taymans [Sat, 30 Mar 2013 16:20:42 +0000 (17:20 +0100)]
videoconvert: use one matrix function
Use only one matrix function pointer, let the implementation cast the pixels to
the right size.
Wim Taymans [Fri, 29 Mar 2013 10:48:05 +0000 (11:48 +0100)]
videoconvert: use one temp array for lines
Use only one temporary array for pixels.
Wim Taymans [Sat, 30 Mar 2013 18:13:47 +0000 (19:13 +0100)]
videodecoder: forward stream-start immediately
Wim Taymans [Sat, 30 Mar 2013 18:07:05 +0000 (19:07 +0100)]
audiodecoder: forward stream-start immediately
Sebastian Dröge [Sat, 30 Mar 2013 16:17:04 +0000 (17:17 +0100)]
decodebin: Remove GstdecodePads that are not going to be exposed
This makes sure that they're unlnked and don't cause any errors or
block the pipeline.
Sebastian Dröge [Sat, 30 Mar 2013 11:15:38 +0000 (12:15 +0100)]
playbin: Ignore caps from audio/video sink factories if there are fixed sinks already
Sebastian Dröge [Sat, 30 Mar 2013 11:08:06 +0000 (12:08 +0100)]
dmabuf: Some code cleanup
Sebastian Dröge [Sat, 30 Mar 2013 11:00:35 +0000 (12:00 +0100)]
docs: Add some documentation that was missing before
Sebastian Dröge [Sat, 30 Mar 2013 10:25:22 +0000 (11:25 +0100)]
playbin: Handle caps queries from unlinked elements
Pass them to all possible sinks and the current sinks to
allow elements to chose a more optimal initial caps.
Sebastian Dröge [Fri, 29 Mar 2013 17:27:03 +0000 (18:27 +0100)]
decodebin: Add autoplug-query signal to handle queries for yet unconnected elements
This allows playbin to answer the CAPS query with the possible sink
caps for example, and allows decoders to chose more optimal caps.
Sebastian Dröge [Sat, 30 Mar 2013 09:25:45 +0000 (10:25 +0100)]
decodebin: Don't add a children to a decode group twice
This can happen if a demuxer does not provide fixed caps from the
beginning but only sets them later.
Sreerenj Balachandran [Fri, 29 Mar 2013 14:05:12 +0000 (16:05 +0200)]
pbutils: Fix the documentation build warning.
Josep Torra [Sat, 30 Mar 2013 08:39:32 +0000 (09:39 +0100)]
xvimagesink: fix debug message printf format compiler warning
Stefan Sauer [Fri, 29 Mar 2013 16:14:09 +0000 (17:14 +0100)]
audiotestsrc: fix a comment typo from previous commit
Sebastian Dröge [Fri, 29 Mar 2013 15:55:56 +0000 (16:55 +0100)]
videometa: Add documentation for GstVideoGLTextureUploadMeta
Stefan Sauer [Fri, 29 Mar 2013 15:44:17 +0000 (16:44 +0100)]
audiotestssrc: truncate the seek pos to the sample and round the time
Before it was done the other way around and that can trigger the assert that
already is in place. This also makes more sense; when seeking to time x, we want
then sample that is <= that pos.
Sebastian Dröge [Fri, 29 Mar 2013 15:37:01 +0000 (16:37 +0100)]
videometa: Implement copying of GstVideoGLTextureUploadMeta
Sebastian Dröge [Fri, 29 Mar 2013 13:46:00 +0000 (14:46 +0100)]
videometa: API: Add GstVideoGLTextureUploadMeta
This allows elements to specify a function to upload
a buffer content to a specific OpenGL texture ID. It
could be used by the vaapi elements to provide a way
for eglglessink or WebKit to upload a VA surface to
an GL texture without the respective sinks knowing
anything about VA.
Stefan Sauer [Fri, 29 Mar 2013 10:47:20 +0000 (11:47 +0100)]
adder: cleanup and reenable adder live source test
The test now passed a few rounds of nice -n19 make elements/adder.torture.
Stefan Sauer [Mon, 25 Mar 2013 15:46:29 +0000 (16:46 +0100)]
audioencoder: api doc fixes.
Wim Taymans [Thu, 28 Mar 2013 17:16:09 +0000 (18:16 +0100)]
videoconvert: respect the pack_lines when packing
Packing is supposed to happen on the amount of lines specified in the format
info. It's currently all set to 1 but that will change.
Wim Taymans [Thu, 28 Mar 2013 17:13:10 +0000 (18:13 +0100)]
videoconvert: be smarter when selecting a conversion
Try to select the conversion that would result in the minimal amount of quality
loss. Quality loss is calculated rather arbitrarily but it avoids doing
something really stupid in most cases.
Wim Taymans [Wed, 27 Mar 2013 18:37:08 +0000 (19:37 +0100)]
videoconvert: small cleanup
Stefan Sauer [Thu, 28 Mar 2013 11:35:45 +0000 (12:35 +0100)]
uridecodebin: remove commented code
This is dead since ~6 years.
Stefan Sauer [Tue, 12 Mar 2013 07:10:23 +0000 (08:10 +0100)]
audiotestsrc: simplify the caps
Drop channel-mask as we only do mon/stereo and channel-mask is optional in these
cases.
Anton Belka [Mon, 25 Mar 2013 10:41:13 +0000 (13:41 +0300)]
riff: add "note" tag
Add GST_RIFF_TAG_note for wavparse.
https://bugzilla.gnome.org/show_bug.cgi?id=696549
https://bugzilla.gnome.org/show_bug.cgi?id=696550
Paul HENRYS [Fri, 22 Mar 2013 12:41:17 +0000 (13:41 +0100)]
audiobasesrc: Fix ringbuffer handling when settings caps
ringbuffer was released after setting values to its spec field
in gst_audio_base_src_setcaps(). This led to failure in case
gst_audio_base_src_setcaps() is called more than one time.
https://bugzilla.gnome.org/show_bug.cgi?id=696540
Wim Taymans [Mon, 25 Mar 2013 08:59:45 +0000 (09:59 +0100)]
video: set interlaced flag correctly in frame
We only look at the interlaced buffer flag in mixed mode, in other modes we
always need to set the interlaced flag.
Simon Berg [Sun, 24 Mar 2013 20:44:58 +0000 (20:44 +0000)]
audiotestsrc: fix rounding errors that might cause segments to be one sample too short
https://bugzilla.gnome.org/show_bug.cgi?id=676884
Simon Berg [Sun, 24 Mar 2013 20:41:44 +0000 (20:41 +0000)]
audiotestsrc: fix buffer size of last buffer
The last buffer before EOS may be smaller than the maximum
size. The current code doesn't adjust for this, it only sets
the duration and offsets.
https://bugzilla.gnome.org/show_bug.cgi?id=696411
Wim Taymans [Sat, 23 Mar 2013 23:39:01 +0000 (00:39 +0100)]
video-format: add small comment
Wim Taymans [Sat, 23 Mar 2013 23:38:22 +0000 (00:38 +0100)]
videoconvert: avoid double free
Set variable to NULL after free so that we don't free twice.
Wim Taymans [Sat, 23 Mar 2013 23:21:36 +0000 (00:21 +0100)]
Revert "videoconvert: prevent bad interlaced conversions"
This reverts commit
adc9694ed70870549fc8f4a6257f3b132ea31733.
No need to restrict the conversion, we can handle interlace correctly. We
basically unpack each field, then convert each field to the target colorspace
and pack and interleave each field to the target format. We also disable any
fast path that can't deal with interlaced formats.
David Schleef [Fri, 8 Mar 2013 22:49:31 +0000 (14:49 -0800)]
videoconvert: prevent bad interlaced conversions
Don't allow conversion that changes vertical subsampling if video
is interlaced.
Arnaud Vrac [Thu, 14 Feb 2013 00:35:45 +0000 (01:35 +0100)]
subparse: fix off by one offset calculation
Do not use the buffer start offset when it is invalid, otherwise a
discontinuity is detected on the next buffer, and the subtitle parser
reset and some subtitle lines are not shown.
Also remove unused next_offset field.
https://bugzilla.gnome.org/show_bug.cgi?id=693981
Tim-Philipp Müller [Fri, 22 Mar 2013 10:47:47 +0000 (10:47 +0000)]
Require Orc >= 0.4.17
Orc 0.4.17 fixes a bunch crashes on i386 and RPi when orc
functions can't be compiled and the fallback function is
supposed to be used. Also fixes some issues on PowerPC.
https://bugzilla.gnome.org/show_bug.cgi?id=684399
https://bugzilla.gnome.org/show_bug.cgi?id=693862
Tim-Philipp Müller [Fri, 22 Mar 2013 09:35:21 +0000 (09:35 +0000)]
typefinding: fix y4m caps
We need to specify the y4mversion field now.
https://bugzilla.gnome.org/show_bug.cgi?id=696282
Sebastian Dröge [Thu, 21 Mar 2013 14:37:31 +0000 (15:37 +0100)]
subtitleoverlay: Return ANY caps for the GET_CAPS query
subtitleoverlay handles any caps, not just the ones
for which a subtitle parser/renderer exist. It will
just ignore any unsupported streams instead of causing
an error.
https://bugzilla.gnome.org/show_bug.cgi?id=688476
Sebastian Dröge [Thu, 21 Mar 2013 12:33:44 +0000 (13:33 +0100)]
playsinkconvertbin: Make sure to return all allowed caps in the GET_CAPS query
Add all the caps that we can convert to to the filter caps,
otherwise downstream might just return EMPTY caps because
it doesn't handle the filter caps but we could still convert
to these caps, causing us to return EMPTY caps although
conversion would be possible.
https://bugzilla.gnome.org/show_bug.cgi?id=688803
Sebastian Dröge [Thu, 21 Mar 2013 12:29:06 +0000 (13:29 +0100)]
ximagesink: Don't access structures of EMPTY caps
If the intersection between our caps and the filter caps is
empty, just immediately return EMPTY caps instead of trying
to access the (non-existant) structures.
Sebastian Dröge [Thu, 21 Mar 2013 10:42:43 +0000 (11:42 +0100)]
playsinkconvertbin: Use gst_caps_is_subset() for handling the ACCEPT_CAPS query
Sebastian Dröge [Thu, 21 Mar 2013 10:14:27 +0000 (11:14 +0100)]
videoscale: Let the add-borders property default to TRUE
It's undesirable most of the time that the display aspect ratio
is changed.
Jan Schole [Wed, 20 Mar 2013 18:34:06 +0000 (19:34 +0100)]
videoscale: Correct DAR and border calculations
changed: gst_video_scale_set_info in gst/videoscale/gstvideoscale.c
DAR on sink side now calculated with PAR on sink side
ratio of output width/height now calculated with inverse PAR
additional condition that borders are 0:0 for passthrough mode
https://bugzilla.gnome.org/show_bug.cgi?id=696019
Wim Taymans [Fri, 15 Mar 2013 09:07:55 +0000 (10:07 +0100)]
playback-test: wait for buffering after seek
Wait for buffering to finish before setting the element to the playing state
after a seek.
Marc Leeman [Thu, 14 Mar 2013 09:58:11 +0000 (10:58 +0100)]
audioringbuffer: avoid division by 0 when outputting debug info
https://bugzilla.gnome.org/show_bug.cgi?id=695832
Wim Taymans [Thu, 14 Mar 2013 14:46:59 +0000 (15:46 +0100)]
xvimagesink: configure colorimetry
Use the XV_ITURBT_709 attribute to configure the 601 or 709 matrix
depending on the color matrix of the input video frame.
Wim Taymans [Thu, 14 Mar 2013 14:44:53 +0000 (15:44 +0100)]
xvcontext: protect X call with lock
Wim Taymans [Wed, 13 Mar 2013 10:13:58 +0000 (11:13 +0100)]
xvimagesink: use xvcontext for allocation
Make a new refcounted xvcontext object that handles the X connection.
Use the xvcontext to allocate images and windows. Move some code
around so that all X calls are made from the xvcontext object.
Make a GstXvImageAllocator object that allocates images from the xvcontext. We
can implement a copy function now for these memory objects now.
Make the bufferpool use the xvimageallocator object for its images.
Tim-Philipp Müller [Wed, 13 Mar 2013 01:00:45 +0000 (01:00 +0000)]
tests: fix appsrc unit test spam
spam 1 spam 2 spam 3 spam 4 spam 5
Greg Rutz [Tue, 12 Mar 2013 03:55:28 +0000 (21:55 -0600)]
libvisual: fix improper video frame clear operation
The current code is memsetting the GstVideoFrame.data address to 0s (which
causes a segfault). This member is actually an array of data buffers (one for
each plane). This fix iterates over each data plane to clear them all.
https://bugzilla.gnome.org/show_bug.cgi?id=695655
Nicola Murino [Tue, 12 Mar 2013 09:32:44 +0000 (10:32 +0100)]
appsrc: fix deadlock setting pipeline in NULL state with block=true
Emanuele Aina [Mon, 11 Mar 2013 21:33:04 +0000 (22:33 +0100)]
build: Link libgstrtsp-1.0.so to libm for pow()
https://bugzilla.gnome.org/show_bug.cgi?id=695658
Víctor Manuel Jáquez Leal [Mon, 11 Mar 2013 22:46:19 +0000 (23:46 +0100)]
appsink: update the emit-signal description
Update the emit-signal description according to its current signals.
https://bugzilla.gnome.org/show_bug.cgi?id=695660
Stefan Sauer [Mon, 11 Mar 2013 21:46:45 +0000 (22:46 +0100)]
adder: add a missing break
Dirk Van Haerenborgh [Sun, 10 Mar 2013 08:07:17 +0000 (09:07 +0100)]
riff: never create caps with negative height
https://bugzilla.gnome.org/show_bug.cgi?id=695540
Wim Taymans [Mon, 11 Mar 2013 09:49:58 +0000 (10:49 +0100)]
defs: add new methods
Olivier Crête [Fri, 22 Feb 2013 18:32:21 +0000 (13:32 -0500)]
rtsprange: Add function to convert a range between formats
Also add unit tests.
Olivier Crête [Fri, 22 Feb 2013 18:26:03 +0000 (13:26 -0500)]
rtsprange: Make _to_string() be more in line with RFC 2326
Fix various nits to make it more in line with the RFC, also add unit tests.
Olivier Crête [Fri, 22 Feb 2013 18:20:21 +0000 (13:20 -0500)]
rtsprange: Avoid going through fractions for large numbers
If the number of seconds exceeds 2^31, then it will be truncated if the
conversion is done using fractions, so multiply it directly.
Olivier Crête [Fri, 22 Feb 2013 18:18:10 +0000 (13:18 -0500)]
rtsprange: Fix conversion from UTC to GstClockTime
Do the difference in the right direction.
Olivier Crête [Tue, 19 Feb 2013 00:49:07 +0000 (19:49 -0500)]
rtspconnection: Add API to disable session ID caching in the connection
This is necessary to allow having more than one session in the same connection.
API: gst_rtsp_connection_set_remember_session_id()
API: gst_rtsp_connection_get_remember_session_id()
Josep Torra [Sun, 10 Mar 2013 17:05:28 +0000 (18:05 +0100)]
dmabuf: Use correct print format specifier to fix a compiler warning
Tim-Philipp Müller [Thu, 7 Mar 2013 10:49:30 +0000 (10:49 +0000)]
tests: update libs ABI check GstRTSPTimeRange structure size on i386
https://bugzilla.gnome.org/show_bug.cgi?id=695276
Stefan Sauer [Thu, 7 Mar 2013 08:27:45 +0000 (09:27 +0100)]
videotestsrc: make colors controlable
Also trim since markers.
Tim-Philipp Müller [Thu, 7 Mar 2013 00:00:14 +0000 (00:00 +0000)]
Automatic update of common submodule
From 2de221c to 04c7a1e
Stefan Sauer [Tue, 5 Mar 2013 21:29:24 +0000 (22:29 +0100)]
oggmux: don't keep a static string beyond the ref of the owning object
Also move down the ref for the caps a bit, so tha we don't leak it in the branch that calls continue.
Wim Taymans [Tue, 5 Mar 2013 15:41:52 +0000 (16:41 +0100)]
ximagesink: don't share memory
Wim Taymans [Tue, 5 Mar 2013 15:34:35 +0000 (16:34 +0100)]
xvimagesink: mark as NO_SHARE
We don't want to share the memory between buffers because that could
cause the memory of the bufferpool buffers to be copied and replaced
with other memory.
This is a hopefully a temporary fix until we can figure out how to share
properly.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=695203
Stefan Sauer [Fri, 1 Mar 2013 18:14:18 +0000 (19:14 +0100)]
oggmux: don't crash on caps being NULL
Also avoid unused variables if debugging is disabled.
Tim-Philipp Müller [Sun, 3 Mar 2013 17:44:11 +0000 (17:44 +0000)]
uridecodebin: minor GValue handling optimisation