Vitaliy Kulikov [Thu, 14 Nov 2013 17:52:16 +0000 (11:52 -0600)]
ALSA: hda - load EQ params into IDT codec on HP bNB13 systems
Adds linear EQ filtering for integrated speaker protection
Signed-off-by: Vitaliy Kulikov <vitaliy.kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 14 Nov 2013 14:35:46 +0000 (15:35 +0100)]
ALSA: jack: Unregister input device at disconnection
The recent change in sysfs triggered a kernel WARNING at unloading a
sound driver like
WARNING: CPU: 3 PID: 2247 at fs/sysfs/group.c:214 sysfs_remove_group+0xe8/0xf0()
sysfs group
ffffffff81ab7b20 not found for kobject 'event14'
for each jack instance. It's because the unregistration of jack input
device is done in dev_free callback, which is called after
snd_card_disconnect(). Since device_unregister(card->card_dev) is
called in snd_card_disconnect(), the whole sysfs entries belonging to
card->card_dev have been already removed recursively. Thus this
results in a warning as input_unregister_device() yet tries to
unregister the already removed sysfs entry.
For fixing this mess, we need to unregister the jack input device at
dev_disconnect callback so that it's called before unregistering the
card->card_dev.
Reviwed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 14 Nov 2013 14:45:12 +0000 (15:45 +0100)]
ALSA: pcsp: Fix the order of input device unregistration
The current code may access to the already freed object. The input
device must be accessed and unregistered before freeing the top level
sound object.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Vasily Khoruzhick [Wed, 13 Nov 2013 10:13:35 +0000 (13:13 +0300)]
ALSA: usb-audio: add front jack channel selector for EMU0204
Add support for front jack channel selector which is present on EMU0204.
It allows to get 4 channels out of this soundcard.
Tested-by: Yury Bushmelev <jay@jay-tech.ru>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 13 Nov 2013 15:58:10 +0000 (16:58 +0100)]
ALSA: hda - Don't clear the power state at snd_hda_codec_reset()
snd_hda_codec_reset() is called either in resetting the whole setup at
error paths or hwdep clear/reconfig sysfs triggers. But all of these
don't assume that the power has to be off, rather they want to keep
the power state unchanged (e.g. reconfig_codec() calls the power
up/down by itself). Thus, unconditionally clearing the power state in
snd_hda_codec_reset() leads to the inconsistency, confuses the further
operation. This patch gets rid of the lines doing that bad thing.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 13 Nov 2013 08:42:56 +0000 (09:42 +0100)]
ALSA: hda - Control EAPD for Master volume on Lenovo N100
Similarly as other laptops with AD1981 & co codecs, we can control
EAPD on AD1986A more safely depending on the Master switch, in order
to save some power.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 13 Nov 2013 08:39:08 +0000 (09:39 +0100)]
ALSA: hda - Don't turn off EAPD for headphone on Lenovo N100
The only EAPD on AD1986A is on NID 0x1b where usually the speaker.
But this doesn't control only the speaker amp but may influence on all
outputs, e.g. Lenovo N100 laptop seems to have this issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dan Carpenter [Wed, 13 Nov 2013 07:58:38 +0000 (10:58 +0300)]
ALSA: isa: not allocating enough space
We allocate only 4 bytes here "sizeof(int)" instead of WF_MSAMPLE_BYTES
(259) which was intended.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dan Carpenter [Wed, 13 Nov 2013 07:45:20 +0000 (10:45 +0300)]
ALSA: snd-aoa: two copy and paste bugs
These functions were cut and paste and the tests for NULL weren't
updated properly.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 12 Nov 2013 10:36:00 +0000 (11:36 +0100)]
ALSA: hda - Check keep_eapd_on before inv_eapd
We don't change the EAPD bit in set_pin_eapd() if keep_eapd_on flag is
set by the codec driver and enable is false. But, we also apply the
flipping of enable value according to inv_eapd flag in the same
function, and this confused the former check, handled as if it's
turned ON. The inverted EAPD check must be applied after keep_eapd_on
check, instead.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Tue, 12 Nov 2013 10:10:57 +0000 (11:10 +0100)]
ALSA: hda - Fix Line Out automute on Realtek multifunction jacks
In case there is both a multifunction headset jack and a Line Out
jack, automuting was not working properly from the Line Out jack.
This patch fixes that issue.
Cc: stable@vger.kernel.org (3.10+)
BugLink: https://bugs.launchpad.net/bugs/1250377
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 12 Nov 2013 07:06:20 +0000 (08:06 +0100)]
ALSA: msnd: Avoid duplicated driver name
msnd_pinnacle.c is used for both snd-msnd-pinnacle and
snd-msnd-classic drivers, and both should have different driver
names. Using the same driver name results in the sysfs warning for
duplicated entries like
kobject: 'msnd-pinnacle.7' (
cec33408): kobject_release, parent (null) (delayed)
kobject: 'msnd-pinnacle' (
cecd4980): kobject_release, parent
cf3ad9b0 (delayed)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x7d/0xa0()
sysfs: cannot create duplicate filename '/bus/isa/drivers/msnd-pinnacle'
......
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Richard Fitzgerald [Tue, 22 Oct 2013 10:26:48 +0000 (11:26 +0100)]
ALSA: compress_core: don't return -EBADFD from poll if paused
Pausing audio playback is not an illegal state so it doesn't
seem sensible for poll() to return -EBADFD on a paused stream.
There's also no reason to assume that we can't write more data
to the DSP while playback is paused. Remove the -EBADFD so that
a stream in paused state will still report the buffer
availability from poll(). It is up to the user process to
manage its state so that it knows whether it is paused or not.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by VInod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Anssi Hannula [Sun, 10 Nov 2013 20:57:42 +0000 (22:57 +0200)]
ALSA: hda - hdmi: Fix wrong baseline length in ATI/AMD generated ELD
According to the HDA specification the baseline ELD length is counted in
DW of 4 bytes instead of in bytes.
Fix the code accordingly.
Baseline length is not used by the kernel so only the ELD exported to
userspace was affected. No issues have been reported.
v2: Fixed so that eld_size is adjusted upwards accordingly as well.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Anssi Hannula [Sun, 10 Nov 2013 18:56:11 +0000 (20:56 +0200)]
ALSA: hda - hdmi: Skip out-of-range latency values in AMD ELD generator
The ATI/AMD video/audio latencies are specified in apparent HDMI VSDB
format. In this format values above 251 are not valid (or stream
component is not supported - 255), but no checking is performed since
this was not mentioned in the AMD HDA verbs specification.
Check that the latencies are valid before using them, and add a comment
describing the formats.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Anssi Hannula [Sun, 10 Nov 2013 18:56:10 +0000 (20:56 +0200)]
ALSA: hda - hdmi: Add error-checking to some codec reads
Add error checks to HBR status reads (both generic and ATI/AMD) and
ATI/AMD codec reads for ELD generation.
Unchecked errors in these just caused more errors later on (invalid
codec writes for the HBR ones and ELD parsing errors for the ATI/AMD ELD
ones), but it is better to catch them earlier.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Anssi Hannula [Sun, 10 Nov 2013 19:24:05 +0000 (21:24 +0200)]
ALSA: usb: Fix wrong mapping of RLC and RRC channels
According to USB Audio spec v2 bits 25 and 26 of bmChannelConfig are
"Back Left of Center - BLC" and "Back Right of Center - BRC",
respectively.
They are currently assigned to ALSA channels BLC/BRC. However, the ALSA
BLC/BRC are actually the rather nonsensical "bottom left center" and
"bottom right center", so the channels will be assigned wrongly. The
comments in the USB code are also similarly wrong, so this is not
readily apparent without looking at the actual specification.
Fix the channel mapping by mapping bits 25 and 26 to RLC (Rear Left
Center) and RRC (Rear Right Center), respectively, instead.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Anssi Hannula [Sun, 10 Nov 2013 19:24:04 +0000 (21:24 +0200)]
ALSA: hda - hdmi: Use TFx channel positions instead of FxH
Channel map positions FLH, FCH, FRH duplicate positions TFL, TFC, TFR.
Both are the speakers above the front speakers (CEA uses "high" and USB
audio uses "top" nomenclature).
Since the USB audio code has used the TFx positions since v3.8
(
04324ccc75f96, "ALSA: usb-audio: add channel map support") but the HDMI
code only just started using FxH in
a5b7d510b2220cccb ("ALSA: hda -
hdmi: Fix channel maps with less common speakers") which is not yet in
any released kernel, standardize on TFx instead.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Wei Yongjun [Mon, 11 Nov 2013 14:21:33 +0000 (22:21 +0800)]
ALSA: sparc: fix missing unlock on error in snd_cs4231_playback_prepare()
Add the missing unlock before return from function
snd_cs4231_playback_prepare() in the error handling
case.
Fixes:
5a19b178d7b4 ('ALSA: sparc/cs4231: Use WARN_ON() instead of BUG_ON()')
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 8 Nov 2013 12:03:57 +0000 (13:03 +0100)]
ALSA: hda - Control SPDIF out pin on MacBookPro 11,2
The SPDIF output MBP11,2 requires the pin control to be set/cleared
for turning on/off the optical SPDIF. The red light turns off only
when the corresponding pin control is cleared (or powered to D3).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64401
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 8 Nov 2013 15:45:38 +0000 (16:45 +0100)]
Merge tag 'asoc-v3.13-fixes' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v3.13
Some additional fixes for v3.13, the majority of which are removals and
downgrades of BUG()s from Takashi.
Kailang Yang [Fri, 8 Nov 2013 07:54:49 +0000 (15:54 +0800)]
ALSA: hda/realtek - Add new codec ALC255/ALC3234 UAJ supported
New codec ALC255/ALC3234 support multifunction jacks.
It used for menual select the input device.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 8 Nov 2013 11:50:31 +0000 (12:50 +0100)]
ALSA: hda - Apply MacBook fixups for CS4208 correctly
The commit [
8fe7b65ab465: ALSA: hda - Apply GPIO setup for MacBooks
with CS4208] added a fixup entry matching with the vendor id 0x106b.
This broke the fixups for previous MBA6,1 and 6,2, since the PCI SSID
vendor id matches before evaluating the codec SSIDs.
We had a similar issue on Mac with Sigmatel codecs, and solve this
problem again similarly, by introducing a skeleton entry matching with
the all MacBooks, then remap to the right one.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64401
Fixes:
8fe7b65ab465 ('ALSA: hda - Apply GPIO setup for MacBooks with CS4208')
Cc: <stable@vger.kernel.org> [v3.12+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark Brown [Fri, 8 Nov 2013 10:43:43 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/wm8996' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:42 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:42 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/wm8400' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:41 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/wm0010' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:41 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/warn' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:40 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/twl6040' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:40 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/twl4030' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:40 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/tpa6130a2' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:39 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/tlv320aic3x' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:39 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/tlv320aic32x4' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:38 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/tlv320aic26' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:38 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/tlv320aic23' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:37 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/tegra' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:37 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/tas5086' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:36 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/spear' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:36 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/sn95031' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:35 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/simple' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:35 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/si476x' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:35 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/samsung' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:34 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/rt5640' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:34 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/rcar' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:33 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/pxa' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:33 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/pcm1792a' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:32 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/pcm1681' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:32 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/mxs' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:31 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/ml26124' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:31 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/mc13783' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:31 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/max9850' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:30 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/max98095' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:30 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/max98088' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:29 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/kirkwood' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:29 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/fsl' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:28 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/ep93xx' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:28 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/doc' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:27 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/devm' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:27 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/davinci' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:26 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/cs42l73' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:26 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/cs42l52' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:25 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/cs4271' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:25 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/cq93vc' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:25 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/core' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:24 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/component' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:24 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/bclk' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:23 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/atmel' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:23 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/arizona' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:22 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/ak4642' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:22 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/ak4104' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:21 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/adsp' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:21 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/adav80x' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:20 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/adau1373' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:20 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/ab8500' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:20 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/topic/88pm860x' into asoc-next
Mark Brown [Fri, 8 Nov 2013 10:43:19 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/fix/fsl' into asoc-linus
Mark Brown [Fri, 8 Nov 2013 10:43:18 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/fix/dma' into asoc-linus
Mark Brown [Fri, 8 Nov 2013 10:43:18 +0000 (10:43 +0000)]
Merge remote-tracking branch 'asoc/fix/ak4642' into asoc-linus
Dan Carpenter [Fri, 8 Nov 2013 09:54:44 +0000 (12:54 +0300)]
ASoC: fsl: imx-wm8962: remove an unneeded check
"data->codec_clk" can't be an ERR_PTR here so I have removed the
superflous check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Fabio Estevam [Fri, 8 Nov 2013 02:55:00 +0000 (00:55 -0200)]
ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable
Commit
68f9672b (ASoC: fsl: imx-pcm-fiq: remove bogus period delta calculation)
introduced the following build warning:
sound/soc/fsl/imx-pcm-fiq.c:53:26: warning: unused variable 'runtime' [-Wunused-variable]
Remove the unused 'runtime' variable.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Oskar Schirmer <oskar@scara.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Kailang Yang [Fri, 1 Nov 2013 07:57:35 +0000 (15:57 +0800)]
ALSA: hda/realtek - Make fixup regs persist after resume
Upon suspend / resume, the fixup register settings are lost because
sending HDA_FIXUP_ACT_PRE_PROBE is not part of the resume path. Instead,
write our registers in response to the HDA_FIXUP_ACT_INIT, which happens
after initial probe and upon resume.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Joe Perches [Thu, 7 Nov 2013 19:55:15 +0000 (11:55 -0800)]
ALSA: hda_intel: ratelimit "spurious response" message
dmesg here has a 100+ consecutive lines of:
[ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
[ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
[ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
...
Ratelimit the message to reduce the dmesg log noise.
Coalesce the format while at it.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Nicolin Chen [Thu, 7 Nov 2013 06:45:16 +0000 (14:45 +0800)]
ASoC: generic-dmaengine-pcm: Use SNDRV_DMA_TYPE_DEV_IRAM as default
When allocating memory space for DMA buffer, use on-chip internal SRAM
as default choice to save power. Since the core would allocate memory
from traditional external memory if iram allocation failed, we don't
need to worry about any side effect.
Signed-off-by: Nicolin Chen <b42378@freescale.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 7 Nov 2013 17:38:47 +0000 (18:38 +0100)]
ASoC: dapm: Use WARN_ON() instead of BUG_ON()
Leaving BUG_ON() in a core layer like dapm is rather inappropriate as
it leads to panic(), even though sanity checks might be still useful
for debugging.
Instead, Use WARN_ON(), and handle the error cases accordingly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Tue, 5 Nov 2013 17:40:00 +0000 (18:40 +0100)]
ASoC: wm_adsp: Fix BUG_ON() and WARN_ON() usages
This patch does:
- Move the sanity check with WARN_ON() in wm_adsp_region_to_reg() and
remove the checks in the callers,
- Fix wrong WARN_ON() usages, replaced with WARN(),
- Fix unreachable or wrong BUG_ON() usages and replace with WARN_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Wed, 6 Nov 2013 10:07:19 +0000 (11:07 +0100)]
ASoC: Replace BUG() with WARN()
BUG() used in the driver is just to spit the stack trace on buggy
points, not really needed to stop the whole operation. For that
purpose, it'd be more convenient to use WARN() instead with more
error information.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Wed, 6 Nov 2013 10:07:18 +0000 (11:07 +0100)]
ASoC: wm_hubs: Replace BUG() with WARN()
BUG() used in the driver is just to spit the stack trace on buggy
points, not really needed to stop the whole operation. For that
purpose, it'd be more convenient to use WARN() instead with more
error information.
Cc: patches@opensource.wolfsonmicro.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Wed, 6 Nov 2013 10:07:17 +0000 (11:07 +0100)]
ASoC: wm8996: Replace BUG() with WARN()
BUG() used in the driver is just to spit the stack trace on buggy
points, not really needed to stop the whole operation. For that
purpose, it'd be more convenient to use WARN() instead with more
error information.
Cc: patches@opensource.wolfsonmicro.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Wed, 6 Nov 2013 10:07:16 +0000 (11:07 +0100)]
ASoC: wm8962: Replace BUG() with WARN()
BUG() used in the driver is just to spit the stack trace on buggy
points, not really needed to stop the whole operation. For that
purpose, it'd be more convenient to use WARN() instead with more
error information.
Cc: patches@opensource.wolfsonmicro.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Wed, 6 Nov 2013 10:07:15 +0000 (11:07 +0100)]
ASoC: wm8958: Replace BUG() with WARN()
BUG() used in the driver is just to spit the stack trace on buggy
points, not really needed to stop the whole operation. For that
purpose, it'd be more convenient to use WARN() instead with more
error information.
Cc: patches@opensource.wolfsonmicro.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Wed, 6 Nov 2013 10:07:14 +0000 (11:07 +0100)]
ASoC: wm8904: Replace BUG() with WARN()
BUG() used in the driver is just to spit the stack trace on buggy
points, not really needed to stop the whole operation. For that
purpose, it'd be more convenient to use WARN() instead with more
error information.
Cc: patches@opensource.wolfsonmicro.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Wed, 6 Nov 2013 10:07:13 +0000 (11:07 +0100)]
ASoC: wm8900: Replace BUG() with WARN()
BUG() used in the driver is just to spit the stack trace on buggy
points, not really needed to stop the whole operation. For that
purpose, it'd be more convenient to use WARN() instead with more
error information.
Cc: patches@opensource.wolfsonmicro.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Wed, 6 Nov 2013 10:07:12 +0000 (11:07 +0100)]
ASoC: wm8350: Replace BUG() with WARN()
BUG() used in the driver is just to spit the stack trace on buggy
points, not really needed to stop the whole operation. For that
purpose, it'd be more convenient to use WARN() instead with more
error information.
Cc: patches@opensource.wolfsonmicro.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Tue, 5 Nov 2013 17:40:07 +0000 (18:40 +0100)]
ASoC: txx9: Use WARN_ON() instead of BUG_ON()
Use WARN_ON() and handle the error cases accordingly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Tue, 5 Nov 2013 17:40:06 +0000 (18:40 +0100)]
ASoC: sh: Use WARN_ON() instead of BUG_ON()
Use WARN_ON() and handle the error cases accordingly.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Tue, 5 Nov 2013 17:40:05 +0000 (18:40 +0100)]
ASoC: rcar: Use WARN_ON() instead of BUG_ON()
Use WARN_ON() and handle the error cases accordingly.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Tue, 5 Nov 2013 17:40:04 +0000 (18:40 +0100)]
ASoC: s6000: Use WARN_ON() instead of BUG_ON()
Use WARN_ON() and handle the error cases accordingly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Tue, 5 Nov 2013 17:40:03 +0000 (18:40 +0100)]
ASoC: pxa: Use WARN_ON() instead of BUG_ON()
Use WARN_ON() and handle the error cases accordingly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Tue, 5 Nov 2013 17:40:02 +0000 (18:40 +0100)]
ASoC: omap: Use WARN_ON() instead of BUG_ON()
Use WARN_ON() and handle the error cases accordingly.
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Takashi Iwai [Tue, 5 Nov 2013 17:40:01 +0000 (18:40 +0100)]
ASoC: mid-x86: Use WARN_ON() instead of BUG_ON()
BUG_ON() is rather useless for debugging as it leads to panic().
Use WARN_ON() and handle the error cases accordingly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
projects / platform / kernel / linux-amlogic.git / log