David S. Miller [Sat, 23 Apr 2022 11:18:16 +0000 (12:18 +0100)]
Merge branch 'dsa-selftests'
Vladimir Oltean says:
====================
DSA selftests
When working on complex new features or reworks it becomes increasingly
difficult to ensure there aren't regressions being introduced, and
therefore it would be nice if we could go over the functionality we
already have and write some tests for it.
Verbally I know from Tobias Waldekranz that he has been working on some
selftests for DSA, yet I have never seen them, so here I am adding some
tests I have written which have been useful for me. The list is by no
means complete (it only covers elementary functionality), but it's still
good to have as a starting point. I also borrowed some refactoring
changes from Joachim Wiberg that he submitted for his "net: bridge:
forwarding of unknown IPv4/IPv6/MAC BUM traffic" series, but not the
entirety of his selftests. I now think that his selftests have some
overlap with bridge_vlan_unaware.sh and bridge_vlan_aware.sh and they
should be more tightly integrated with each other - yet I didn't do that
either :). Another issue I had with his selftests was that they jumped
straight ahead to configure brport flags on br0 (a radical new idea
still at RFC status) while we have bigger problems, and we don't have
nearly enough coverage for the *existing* functionality.
One idea introduced here which I haven't seen before is the symlinking
of relevant forwarding selftests to the selftests/drivers/net/<my-driver>/
folder, plus a forwarding.config file. I think there's some value in
having things structured this way, since the forwarding dir has so many
selftests that aren't relevant to DSA that it is a bit difficult to find
the ones that are.
While searching for applications that I could use for multicast testing
(not my domain of interest/knowledge really), I found Joachim Wiberg's
mtools, mcjoin and omping, and I tried them all with various degrees of
success. In particular, I was going to use mcjoin, but I faced some
issues getting IPv6 multicast traffic to work in a VRF, and I bothered
David Ahern about it here:
https://lore.kernel.org/netdev/
97eaffb8-2125-834e-641f-
c99c097b6ee2@gmail.com/t/
It seems that the problem is that this application should use
SO_BINDTODEVICE, yet it doesn't.
So I ended up patching the bare-bones mtools (msend, mreceive) forked by
Joachim from the University of Virginia's Multimedia Networks Group to
include IPv6 support, and to use SO_BINDTODEVICE. This is what I'm using
now for IPv6.
Note that mausezahn doesn't appear to do a particularly good job of
supporting IPv6 really, and I needed a program to emit the actual
IP_ADD_MEMBERSHIP calls, for dev_mc_add(), so I could test RX filtering.
Crafting the IGMP/MLD reports by hand doesn't really do the trick.
While extremely bare-bones, the mreceive application now seems to do
what I need it to.
Feedback appreciated, it is very likely that I could have done things in
a better way.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 22 Apr 2022 10:15:04 +0000 (13:15 +0300)]
selftests: drivers: dsa: add a subset of forwarding selftests
This adds an initial subset of forwarding selftests which I considered
to be relevant for DSA drivers, along with a forwarding.config that
makes it easier to run them (disables veth pair creation, makes sure MAC
addresses are unique and stable).
The intention is to request driver writers to run these selftests during
review and make sure that the tests pass, or at least that the problems
are known.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 22 Apr 2022 10:15:03 +0000 (13:15 +0300)]
selftests: forwarding: add a test for local_termination.sh
This tests the capability of switch ports to filter out undesired
traffic. Different drivers are expected to have different capabilities
here (so some may fail and some may pass), yet the test still has some
value, for example to check for regressions.
There are 2 kinds of failures, one is when a packet which should have
been accepted isn't (and that should be fixed), and the other "failure"
(as reported by the test) is when a packet could have been filtered out
(for being unnecessary) yet it was received.
The bridge driver fares particularly badly at this test:
TEST: br0: Unicast IPv4 to primary MAC address [ OK ]
TEST: br0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: br0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to joined group [ OK ]
TEST: br0: Multicast IPv4 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: br0: Multicast IPv6 to joined group [ OK ]
TEST: br0: Multicast IPv6 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv6 to unknown group, allmulti [ OK ]
mainly because it does not implement IFF_UNICAST_FLT. Yet I still think
having the test (with the failures) is useful in case somebody wants to
tackle that problem in the future, to make an easy before-and-after
comparison.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 22 Apr 2022 10:15:02 +0000 (13:15 +0300)]
selftests: forwarding: add a no_forwarding.sh test
Bombard a standalone switch port with various kinds of traffic to ensure
it is really standalone and doesn't leak packets to other switch ports.
Also check for switch ports in different bridges, and switch ports in a
VLAN-aware bridge but having different pvids. No forwarding should take
place in either case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 22 Apr 2022 10:15:01 +0000 (13:15 +0300)]
selftests: forwarding: add helper for retrieving IPv6 link-local address of interface
Pinging an IPv6 link-local multicast address selects the link-local
unicast address of the interface as source, and we'd like to monitor for
that in tcpdump.
Add a helper to the forwarding library which retrieves the link-local
IPv6 address of an interface, to make that task easier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 22 Apr 2022 10:15:00 +0000 (13:15 +0300)]
selftests: forwarding: add helpers for IP multicast group joins/leaves
Extend the forwarding library with calls to some small C programs which
join an IP multicast group and send some packets to it. Both IPv4 and
IPv6 groups are supported. Use cases range from testing IGMP/MLD
snooping, to RX filtering, to multicast routing.
Testing multicast traffic using msend/mreceive is intended to be done
using tcpdump.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Wiberg [Fri, 22 Apr 2022 10:14:59 +0000 (13:14 +0300)]
selftests: forwarding: multiple instances in tcpdump helper
Extend tcpdump_start() & C:o to handle multiple instances. Useful when
observing bridge operation, e.g., unicast learning/flooding, and any
case of multicast distribution (to these ports but not that one ...).
This means the interface argument is now a mandatory argument to all
tcpdump_*() functions, hence the changes to the ocelot flower test.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Wiberg [Fri, 22 Apr 2022 10:14:58 +0000 (13:14 +0300)]
selftests: forwarding: add TCPDUMP_EXTRA_FLAGS to lib.sh
For some use-cases we may want to change the tcpdump flags used in
tcpdump_start(). For instance, observing interfaces without the PROMISC
flag, e.g. to see what's really being forwarded to the bridge interface.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 22 Apr 2022 10:14:57 +0000 (13:14 +0300)]
selftests: forwarding: add option to run tests with stable MAC addresses
By default, DSA switch ports inherit their MAC address from the DSA
master.
This works well for practical situations, but some selftests like
bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged
DSA ports, and require the bridge to forward packets between the
standalone ports.
Due to the bridge seeing that the MAC DA it needs to forward is present
as a local FDB entry (it coincides with the MAC address of the bridge
ports), the test packets are not forwarded, but terminated locally on
br0. In turn, this makes the ping and ping6 tests fail.
Address this by introducing an option to have stable MAC addresses.
When mac_addr_prepare is called, the current addresses of the netifs are
saved and replaced with 00:01:02:03:04:${netif number}. Then when
mac_addr_restore is called at the end of the test, the original MAC
addresses are restored. This ensures that the MAC addresses are unique,
which makes the test pass even for DSA ports.
The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS,
which DSA should set to true, all others behave as before. By hooking
the calls to mac_addr_prepare and mac_addr_restore within the forwarding
lib itself, we do not need to patch each individual selftest, the only
requirement is that pre_cleanup is called.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 23 Apr 2022 10:51:06 +0000 (11:51 +0100)]
Merge branch 'mptcp-tcp-fallback'
Mat Martineau says:
====================
mptcp: TCP fallback for established connections
RFC 8684 allows some MPTCP connections to fall back to regular TCP when
the MPTCP DSS checksum detects middlebox interference, there is only a
single subflow, and there is no unacknowledged out-of-sequence
data. When this condition is detected, the stack sends a MPTCP DSS
option with an "infinite mapping" to signal that a fallback is
happening, and the peers will stop sending MPTCP options in their TCP
headers. The Linux MPTCP stack has not yet supported this type of
fallback, instead closing the connection when the MPTCP checksum fails.
This series adds support for fallback to regular TCP in a more limited
scenario, for only MPTCP connections that have never connected
additional subflows or transmitted out-of-sequence data. The selftests
are also updated to check new MIBs that track infinite mappings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Fri, 22 Apr 2022 21:55:43 +0000 (14:55 -0700)]
selftests: mptcp: add infinite map mibs check
This patch adds a function chk_infi_nr() to check the mibs for the
infinite mapping. Invoke it in chk_join_nr() when validate_checksum
is set.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Fri, 22 Apr 2022 21:55:42 +0000 (14:55 -0700)]
mptcp: dump infinite_map field in mptcp_dump_mpext
In trace event class mptcp_dump_mpext, dump the newly added infinite_map
field of struct mptcp_dump_mpext too.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Fri, 22 Apr 2022 21:55:41 +0000 (14:55 -0700)]
mptcp: add mib for infinite map sending
This patch adds a new mib named MPTCP_MIB_INFINITEMAPTX, increase it
when a infinite mapping has been sent out.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Fri, 22 Apr 2022 21:55:40 +0000 (14:55 -0700)]
mptcp: infinite mapping receiving
This patch adds the infinite mapping receiving logic. When the infinite
mapping is received, set the map_data_len of the subflow to 0.
In subflow_check_data_avail(), only reset the subflow when the map_data_len
of the subflow is non-zero.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Fri, 22 Apr 2022 21:55:39 +0000 (14:55 -0700)]
mptcp: infinite mapping sending
This patch adds the infinite mapping sending logic.
Add a new flag send_infinite_map in struct mptcp_subflow_context. Set
it true when a single contiguous subflow is in use and the
allow_infinite_fallback flag is true in mptcp_pm_mp_fail_received().
In mptcp_sendmsg_frag(), if this flag is true, call the new function
mptcp_update_infinite_map() to set the infinite mapping.
Add a new flag infinite_map in struct mptcp_ext, set it true in
mptcp_update_infinite_map(), and check this flag in a new helper
mptcp_check_infinite_map().
In mptcp_update_infinite_map(), set data_len to 0, and clear the
send_infinite_map flag, then do fallback.
In mptcp_established_options(), use the helper mptcp_check_infinite_map()
to let the infinite mapping DSS can be sent out in the fallback mode.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Fri, 22 Apr 2022 21:55:38 +0000 (14:55 -0700)]
mptcp: track and update contiguous data status
This patch adds a new member allow_infinite_fallback in mptcp_sock,
which is initialized to 'true' when the connection begins and is set
to 'false' on any retransmit or successful MP_JOIN. Only do infinite
mapping fallback if there is a single subflow AND there have been no
retransmissions AND there have never been any MP_JOINs.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Fri, 22 Apr 2022 21:55:37 +0000 (14:55 -0700)]
mptcp: add the fallback check
This patch adds the fallback check in subflow_check_data_avail(). Only
do the fallback when the msk hasn't fallen back yet.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Fri, 22 Apr 2022 21:55:36 +0000 (14:55 -0700)]
mptcp: don't send RST for single subflow
When a bad checksum is detected and a single subflow is in use, don't
send RST + MP_FAIL, send data_ack + MP_FAIL instead.
So invoke tcp_send_active_reset() only when mptcp_has_another_subflow()
is true.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 21 Apr 2022 08:55:46 +0000 (09:55 +0100)]
net: hns3: Fix spelling mistake "actvie" -> "active"
There is a spelling mistake in a netdev_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220421085546.321792-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Haowen Bai [Thu, 21 Apr 2022 02:48:03 +0000 (10:48 +0800)]
tsnep: Remove useless null check before call of_node_put()
No need to add null check before call of_node_put(), since the
implementation of of_node_put() has done it.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650509283-26168-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 22 Apr 2022 23:30:07 +0000 (16:30 -0700)]
Merge branch 'add-ethtool-sqi-support-for-lan87xx-t1-phy'
Arun Ramadoss says:
====================
add ethtool SQI support for LAN87xx T1 Phy
This patch series add the Signal Quality Index measurement for the LAN87xx and
LAN937x T1 phy. Updated the maintainers file for microchip_t1.c.
====================
Link: https://lore.kernel.org/r/20220420152016.9680-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arun Ramadoss [Wed, 20 Apr 2022 15:20:16 +0000 (20:50 +0530)]
MAINTAINERS: Add maintainers for Microchip T1 Phy driver
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arun Ramadoss [Wed, 20 Apr 2022 15:20:15 +0000 (20:50 +0530)]
net: phy: LAN87xx: add ethtool SQI support
This patch add the support for measuring Signal Quality Index for
LAN87xx and LAN937x T1 Phy. It uses the SQI Method 5 for obtaining the
values.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Wed, 20 Apr 2022 14:20:07 +0000 (17:20 +0300)]
mlxsw: core_linecards: Fix size of array element during ini_files allocation
types_info->ini_files is an array of pointers
to struct mlxsw_linecard_ini_file.
Fix the kmalloc_array() argument to be of a size of a pointer.
Addresses-Coverity: ("Incorrect expression (SIZEOF_MISMATCH)")
Fixes:
b217127e5e4e ("mlxsw: core_linecards: Add line card objects and implement provisioning")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220420142007.3041173-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault [Thu, 21 Apr 2022 12:47:26 +0000 (14:47 +0200)]
qed: Remove IP services API.
qed_nvmetcp_ip_services.c and its corresponding header file were
introduced in commit
806ee7f81a2b ("qed: Add IP services APIs support")
but there's still no users for any of the functions they declare.
Since these files are effectively unused, let's just drop them.
Found by code inspection. Compile-tested only.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/351ac8c847980e22850eb390553f8cc0e1ccd0ce.1650545051.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi [Wed, 20 Apr 2022 14:07:07 +0000 (16:07 +0200)]
dt-bindings: net: mediatek,net: convert to the json-schema
This patch converts the existing mediatek-net.txt binding file
in yaml format.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 22 Apr 2022 12:06:03 +0000 (13:06 +0100)]
Merge branch 'ipv6-RT_ONLINK-remove-prep'
Guillaume Nault says:
====================
ipv4: First steps toward removing RTO_ONLINK
RTO_ONLINK is a flag that allows to reduce the scope of route lookups.
It's stored in a normally unused bit of the ->flowi4_tos field, in
struct flowi4. However it has several problems:
* This bit is also used by ECN. Although ECN bits are supposed to be
cleared before doing a route lookup, it happened that some code
paths didn't properly sanitise their ->flowi4_tos. So this mechanism
is fragile and we had bugs in the past where ECN bits slipped in and
could end up being erroneously interpreted as RTO_ONLINK.
* A dscp_t type was recently introduced to ensure ECN bits are cleared
during route lookups. ->flowi4_tos is the most important structure
field to convert, but RTO_ONLINK prevents such conversion, as dscp_t
mandates that ECN bits (where RTO_ONLINK is stored) be zero.
Therefore we need to stop using RTO_ONLINK altogether. Fortunately
RTO_ONLINK isn't a necessity. Instead of passing a flag in ->flowi4_tos
to tell the route lookup function to restrict the scope, we can simply
initialise the scope correctly.
Patch 1 does some preparatory work: it stops resetting ->flowi4_scope
automatically before a route lookup, thus allowing callers to set their
desired scope without having to rely on the RTO_ONLINK flag.
Patch 2-3 convert a few code paths to avoid relying on RTO_ONLINK.
More conversions will have to take place before we can eventually
remove this flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Wed, 20 Apr 2022 23:21:37 +0000 (01:21 +0200)]
ipv4: Initialise ->flowi4_scope properly in ICMP handlers.
All the *_redirect() and *_update_pmtu() functions initialise their
struct flowi4 variable with either __build_flow_key() or
build_sk_flow_key(). When sk is provided, these functions use
RT_CONN_FLAGS() to set ->flowi4_tos and always use RT_SCOPE_UNIVERSE
for ->flowi4_scope. Then they rely on ip_rt_fix_tos() to adjust the
scope based on the RTO_ONLINK bit and to mask the tos with
IPTOS_RT_MASK.
This patch modifies __build_flow_key() and build_sk_flow_key() to
properly initialise ->flowi4_tos and ->flowi4_scope, so that the
ICMP redirects and PMTU handlers don't need an extra call to
ip_rt_fix_tos() before doing a fib lookup. That is, we:
* Drop RT_CONN_FLAGS(): use ip_sock_rt_tos() and ip_sock_rt_scope()
instead, so that we don't have to rely on ip_rt_fix_tos() to adjust
the scope anymore.
* Apply IPTOS_RT_MASK to the tos, so that we don't need
ip_rt_fix_tos() to do it for us.
* Drop the ip_rt_fix_tos() calls that now become useless.
The only remaining ip_rt_fix_tos() caller is ip_route_output_key_hash()
which needs it as long as external callers still use the RTO_ONLINK
flag.
Note:
This patch also drops some useless RT_TOS() calls as IPTOS_RT_MASK is
a stronger mask.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Wed, 20 Apr 2022 23:21:33 +0000 (01:21 +0200)]
ipv4: Avoid using RTO_ONLINK with ip_route_connect().
Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally,
we don't have to rely on the RTO_ONLINK bit to properly set the scope
of a flowi4 structure. We can just set ->flowi4_scope explicitly and
avoid using RTO_ONLINK in ->flowi4_tos.
This patch converts callers of ip_route_connect(). Instead of setting
the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can:
1- Drop the tos parameter from ip_route_connect(): its value was
entirely based on sk, which is also passed as parameter.
2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option
instead of always initialising it with RT_SCOPE_UNIVERSE (let's
define ip_sock_rt_scope() for this purpose).
3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is
now properly initialised, we don't need to tell ip_rt_fix_tos() to
adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(),
which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK
bit overload.
Note:
In the original ip_route_connect() code, __ip_route_output_key()
might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of
ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the
original tos variable. Now that we don't set RTO_ONLINK any more,
this is not a problem and we can use fl4->flowi4_tos in
flowi4_update_output().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Wed, 20 Apr 2022 23:21:24 +0000 (01:21 +0200)]
ipv4: Don't reset ->flowi4_scope in ip_rt_fix_tos().
All callers already initialise ->flowi4_scope with RT_SCOPE_UNIVERSE,
either by manual field assignment, memset(0) of the whole structure or
implicit structure initialisation of on-stack variables
(RT_SCOPE_UNIVERSE actually equals 0).
Therefore, we don't need to always initialise ->flowi4_scope in
ip_rt_fix_tos(). We only need to reduce the scope to RT_SCOPE_LINK when
the special RTO_ONLINK flag is present in the tos.
This will allow some code simplification, like removing
ip_rt_fix_tos(). Also, the long term idea is to remove RTO_ONLINK
entirely by properly initialising ->flowi4_scope, instead of
overloading ->flowi4_tos with a special flag. Eventually, this will
allow to convert ->flowi4_tos to dscp_t.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 22 Apr 2022 11:52:27 +0000 (12:52 +0100)]
Merge branch 'zynqmp-phy-config-optional'
Radhey Shyam Pandey says:
====================
net: macb: Make ZynqMP SGMII phy configuration optional
This patchset drop phy-names property from MACB node and also make
SGMII Phy configuration optional. The motivation for this change
is to support traditional usescase in which first stage bootloader
does PS-GT configuration, and should still be supported in macb
driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Radhey Shyam Pandey [Wed, 20 Apr 2022 11:03:10 +0000 (16:33 +0530)]
net: macb: In ZynqMP initialization make SGMII phy configuration optional
In the macb binding documentation "phys" is an optional property. Make
implementation in line with it. This change allows the traditional flow
in which first stage bootloader does PS-GT configuration to work along
with newer use cases in which PS-GT configuration is managed by the
phy-zynqmp driver.
It fixes below macb probe failure when macb DT node doesn't have SGMII
phys handle.
"macb
ff0b0000.ethernet: error -ENODEV: failed to get PS-GTR PHY"
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Radhey Shyam Pandey [Wed, 20 Apr 2022 11:03:09 +0000 (16:33 +0530)]
dt-bindings: net: cdns,macb: Drop phy-names property for ZynqMP SGMII PHY
In zynqmp SGMII initialization, there is a single PHY so remove phy-names
property as there is no real need of having it.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 22 Apr 2022 11:47:51 +0000 (12:47 +0100)]
Merge branch 'ipv6-only-sock'
Kuniyuki Iwashima says:
====================
ipv6: Use ipv6_only_sock helper function.
The first patch removes __ipv6_only_sock(), and the second replaces
ipv6only tests with ipv6_only_sock().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima [Wed, 20 Apr 2022 01:58:51 +0000 (10:58 +0900)]
ipv6: Use ipv6_only_sock() helper in condition.
This patch replaces some sk_ipv6only tests with ipv6_only_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima [Wed, 20 Apr 2022 01:58:50 +0000 (10:58 +0900)]
ipv6: Remove __ipv6_only_sock().
Since commit
9fe516ba3fb2 ("inet: move ipv6only in sock_common"),
ipv6_only_sock() and __ipv6_only_sock() are the same macro. Let's
remove the one.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Rix [Tue, 19 Apr 2022 14:06:25 +0000 (10:06 -0400)]
USB2NET : SR9800 : change SR9800_BULKIN_SIZE from global to static
Smatch reports this issue
sr9800.h:166:53: warning: symbol 'SR9800_BULKIN_SIZE' was not declared. Should it be static?
Global variables should not be defined in header files.
This only works because sr9800.h in only included by sr9800.c
Change the storage-class specifier to static.
And since it does not change add type qualifier const.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florent Fourcot [Tue, 19 Apr 2022 12:51:51 +0000 (14:51 +0200)]
Revert "rtnetlink: return EINVAL when request cannot succeed"
This reverts commit
b6177d3240a4
ip-link command is testing kernel capability by sending a RTM_NEWLINK
request, without any argument. It accepts everything in reply, except
EOPNOTSUPP and EINVAL (functions iplink_have_newlink / accept_msg)
So we must keep compatiblity here, invalid empty message should not
return EINVAL
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Tested-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Baowen Zheng [Tue, 19 Apr 2022 12:44:43 +0000 (14:44 +0200)]
nfp: support 802.1ad VLAN assingment to VF
The NFP driver already supports assignment of 802.1Q VLANs to VFs
e.g.
# ip link set $DEV vf $VF_NUM vlan $VLAN_ID [proto 802.1Q]
This patch enhances the NFP driver to also allow assingment of
802.1ad VLANs to VFs.
e.g.
# ip link set $DEV vf $VF_NUM vlan $VLAN_ID proto 802.1ad
Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Yinjun Zhang <yunjin.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minghao Chi [Tue, 19 Apr 2022 11:03:52 +0000 (11:03 +0000)]
net: ethernet: ti: am65-cpsw-ethtool: use pm_runtime_resume_and_get
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Ajith S [Tue, 19 Apr 2022 10:59:10 +0000 (10:59 +0000)]
net/ipv6: Enforce limits for accept_unsolicited_na sysctl
Fix mistake in the original patch where limits were specified but the
handler didn't take care of the limits.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 18 Apr 2022 14:37:59 +0000 (15:37 +0100)]
myri10ge: remove redundant assignment to variable status
Variable status is being assigned a value that is never read, it is
being re-assigned again later on. The assignment is redundant and can
be removed.
Cleans up clang scan build warning:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:582:7: warning: Although
the value stored to 'status' is used in the enclosing expression, the
value is never actually read from 'status' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunbo Yu [Mon, 18 Apr 2022 14:18:12 +0000 (22:18 +0800)]
net: cdc-ncm: Move spin_lock_bh() to spin_lock()
It is unnecessary to call spin_lock_bh() for you are already in a tasklet.
Signed-off-by: Yunbo Yu <yuyunbo519@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 22 Apr 2022 07:56:00 +0000 (09:56 +0200)]
Merge git://git./linux/kernel/git/netdev/net
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
d08ed852560e ("net: lan966x: Make sure to release ptp interrupt")
c8349639324a ("net: lan966x: Add FDMA functionality")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Thu, 21 Apr 2022 19:29:08 +0000 (12:29 -0700)]
Merge tag 'net-5.18-rc4' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from xfrm and can.
Current release - regressions:
- rxrpc: restore removed timer deletion
Current release - new code bugs:
- gre: fix device lookup for l3mdev use-case
- xfrm: fix egress device lookup for l3mdev use-case
Previous releases - regressions:
- sched: cls_u32: fix netns refcount changes in u32_change()
- smc: fix sock leak when release after smc_shutdown()
- xfrm: limit skb_page_frag_refill use to a single page
- eth: atlantic: invert deep par in pm functions, preventing null
derefs
- eth: stmmac: use readl_poll_timeout_atomic() in atomic state
Previous releases - always broken:
- gre: fix skb_under_panic on xmit
- openvswitch: fix OOB access in reserve_sfa_size()
- dsa: hellcreek: calculate checksums in tagger
- eth: ice: fix crash in switchdev mode
- eth: igc:
- fix infinite loop in release_swfw_sync
- fix scheduling while atomic"
* tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
drivers: net: hippi: Fix deadlock in rr_close()
selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
nfc: MAINTAINERS: add Bug entry
net: stmmac: Use readl_poll_timeout_atomic() in atomic state
doc/ip-sysctl: add bc_forwarding
netlink: reset network and mac headers in netlink_dump()
net: mscc: ocelot: fix broken IP multicast flooding
net: dsa: hellcreek: Calculate checksums in tagger
net: atlantic: invert deep par in pm functions, preventing null derefs
can: isotp: stop timeout monitoring when no first frame was sent
bonding: do not discard lowest hash bit for non layer3+4 hashing
net: lan966x: Make sure to release ptp interrupt
ipv6: make ip6_rt_gc_expire an atomic_t
net: Handle l3mdev in ip_tunnel_init_flow
l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu
net/sched: cls_u32: fix possible leak in u32_init_knode()
net/sched: cls_u32: fix netns refcount changes in u32_change()
powerpc: Update MAINTAINERS for ibmvnic and VAS
net: restore alpha order to Ethernet devices in config
...
Haowen Bai [Mon, 18 Apr 2022 10:22:13 +0000 (18:22 +0800)]
net: eql: Use kzalloc instead of kmalloc/memset
Use kzalloc rather than duplicating its implementation, which
makes code simple and easy to understand.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650277333-31090-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Minghao Chi [Mon, 18 Apr 2022 06:29:21 +0000 (06:29 +0000)]
drivers: net: davinci_mdio: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220418062921.2557884-1-chi.minghao@zte.com.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Duoming Zhou [Sun, 17 Apr 2022 12:55:19 +0000 (20:55 +0800)]
drivers: net: hippi: Fix deadlock in rr_close()
There is a deadlock in rr_close(), which is shown below:
(Thread 1) | (Thread 2)
| rr_open()
rr_close() | add_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rr_timer()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold rrpriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need rrpriv->lock in position (2) of thread 2.
As a result, rr_close() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Wed, 20 Apr 2022 19:43:27 +0000 (12:43 -0700)]
Merge tag 'xtensa-
20220416' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix patching CPU selection in patch_text
- fix potential deadlock in ISS platform serial driver
- fix potential register clobbering in coprocessor exception handler
* tag 'xtensa-
20220416' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix a7 clobbering in coprocessor context load/store
arch: xtensa: platforms: Fix deadlock in rs_close()
xtensa: patch_text: Fixup last cpu should be master
Linus Torvalds [Wed, 20 Apr 2022 19:35:20 +0000 (12:35 -0700)]
Merge tag 'erofs-for-5.18-rc4-fixes' of git://git./linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"One patch to fix a use-after-free race related to the on-stack
z_erofs_decompressqueue, which happens very rarely but needs to be
fixed properly soon.
The other patch fixes some sysfs Sphinx warnings"
* tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors
erofs: fix use-after-free of on-stack io[]
Linus Torvalds [Wed, 20 Apr 2022 19:07:53 +0000 (12:07 -0700)]
Revert "fs/pipe: use kvcalloc to allocate a pipe_buffer array"
This reverts commit
5a519c8fe4d620912385f94372fc8472fa98c662.
It turns out that making the pipe almost arbitrarily large has some
rather unexpected downsides. The kernel test robot reports a kernel
warning that is due to pipe->max_usage now growing to the point where
the iter_file_splice_write() buffer allocation can no longer be
satisfied as a slab allocation, and the
int nbufs = pipe->max_usage;
struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec),
GFP_KERNEL);
code sequence there will now always fail as a result.
That code could be modified to use kvcalloc() too, but I feel very
uncomfortable making those kinds of changes for a very niche use case
that really should have other options than make these kinds of
fundamental changes to pipe behavior.
Maybe the CRIU process dumping should be multi-threaded, and use
multiple pipes and multiple cores, rather than try to use one larger
pipe to minimize splice() calls.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/all/20220420073717.GD16310@xsang-OptiPlex-9020/
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mikulas Patocka [Tue, 19 Apr 2022 13:56:23 +0000 (09:56 -0400)]
x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
The first "if" condition in __memcpy_flushcache is supposed to align the
"dest" variable to 8 bytes and copy data up to this alignment. However,
this condition may misbehave if "size" is greater than 4GiB.
The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
arguments to unsigned int and selects the smaller one. However, the
cast truncates high bits in "size" and it results in misbehavior.
For example:
suppose that size == 0x100000001, dest == 0x200000002
min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
...
dest += 0x1;
so we copy just one byte "and" dest remains unaligned.
This patch fixes the bug by replacing unsigned with size_t.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ido Schimmel [Tue, 19 Apr 2022 13:51:55 +0000 (16:51 +0300)]
selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes:
d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 19 Apr 2022 13:51:54 +0000 (16:51 +0300)]
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes:
94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 20 Apr 2022 14:03:22 +0000 (15:03 +0100)]
Merge branch 'mlxsw-line-card-status-tracking'
Ido Schimmel says:
====================
mlxsw: Line cards status tracking
When a line card is provisioned, netdevs corresponding to the ports
found on the line card are registered. User space can then perform
various logical configurations (e.g., splitting, setting MTU) on these
netdevs.
However, since the line card is not present / powered on (i.e., it is
not in 'active' state), user space cannot access the various components
found on the line card. For example, user space cannot read the
temperature of gearboxes or transceiver modules found on the line card
via hwmon / thermal. Similarly, it cannot dump the EEPROM contents of
these transceiver modules. The above is only possible when the line card
becomes active.
This patchset solves the problem by tracking the status of each line
card and invoking callbacks from interested parties when a line card
becomes active / inactive.
Patchset overview:
Patch #1 adds the infrastructure in the line cards core that allows
users to registers a set of callbacks that are invoked when a line card
becomes active / inactive. To avoid races, if a line card is already
active during registration, the got_active() callback is invoked.
Patches #2-#3 are preparations.
Patch #4 changes the port module core to register a set of callbacks
with the line cards core. See detailed description with examples in the
commit message.
Patches #5-#6 do the same with regards to thermal / hwmon support, so
that user space will be able to monitor the temperature of various
components on the line card when it becomes active.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Tue, 19 Apr 2022 14:54:31 +0000 (17:54 +0300)]
mlxsw: core_hwmon: Add interfaces for line card initialization and de-initialization
Add callback functions for line card 'hwmon' initialization and
de-initialization. Each line card is associated with the relevant
'hwmon' device, which may contain thermal attributes for the cages
and gearboxes found on this line card.
The line card 'hwmon' initialization / de-initialization APIs are to be
called when line card is set to active / inactive state by
got_active() / got_inactive() callbacks from line card state machine.
For example cage temperature for module #9 located at line card #7 will
be exposed by utility 'sensors' like:
linecard#07
front panel 009: +32.0C (crit = +70.0C, emerg = +80.0C)
And temperature for gearbox #3 located at line card #5 will be exposed
like:
linecard#05
gearbox 003: +41.0C (highest = +41.0C)
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Tue, 19 Apr 2022 14:54:30 +0000 (17:54 +0300)]
mlxsw: core_thermal: Add interfaces for line card initialization and de-initialization
Add callback functions for line card thermal area initialization and
de-initialization. Each line card is associated with the relevant
thermal area, which may contain thermal zones for cages and gearboxes
found on this line card.
The line card thermal initialization / de-initialization APIs are to be
called when line card is set to active / inactive state by
got_active() / got_inactive() callbacks from line card state machine.
For example thermal zone for module #9 located at line card #7 will
have type:
mlxsw-lc7-module9.
And thermal zone for gearbox #2 located at line card #5 will have type:
mlxsw-lc5-gearbox2.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Tue, 19 Apr 2022 14:54:29 +0000 (17:54 +0300)]
mlxsw: core_env: Add interfaces for line card initialization and de-initialization
Netdevs for ports found on line cards are registered upon provisioning.
However, user space is not allowed to access the transceiver modules
found on a line card until the line card becomes active.
Therefore, register event operations with the line card core to get
notifications whenever a line card becomes active or inactive.
When user space tries to dump the EEPROM of a transceiver module or reset
it and the corresponding line card is inactive, emit an error
message:
ethtool -m enp1s0nl7p9
netlink error: mlxsw_core: Cannot read EEPROM of module on an inactive line card
netlink error: Input/output error
When user space tries to set the power mode policy of such a transceiver,
cache the configuration and apply it when the line card becomes active. This
is consistent with other port configuration (e.g., MTU setting) that user space
is able to perform while the line card is provisioned, but inactive.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Tue, 19 Apr 2022 14:54:28 +0000 (17:54 +0300)]
mlxsw: core_env: Split module power mode setting to a separate function
Move the code that applies the module power mode to the device to a
separate function. This function will be invoked by the next patch to
set the power mode on transceiver modules found on a line card when the
line card becomes active.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Tue, 19 Apr 2022 14:54:27 +0000 (17:54 +0300)]
mlxsw: core: Add bus argument to environment init API
Pass bus argument to mlxsw_env_init(). The purpose is to get access to
device handle, which is to be provided to error message in case of line
card activation failure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 19 Apr 2022 14:54:26 +0000 (17:54 +0300)]
mlxsw: core_linecards: Introduce ops for linecards status change tracking
Introduce an infrastructure allowing users to register a set
of operations which are to be called whenever a line card gets
active/inactive.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kozlowski [Wed, 20 Apr 2022 10:46:01 +0000 (12:46 +0200)]
nfc: MAINTAINERS: add Bug entry
Add a Bug section, indicating preferred mailing method for bug reports,
to NFC Subsystem entry.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 20 Apr 2022 10:14:36 +0000 (11:14 +0100)]
Merge tag 'linux-can-next-for-5.19-
20220419' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-04-19
this is a pull request of 17 patches for net-next/master.
The first 2 patches are by me and target the CAN driver
infrastructure. One patch renames a function in the rx_offload helper
the other one updates the CAN bitrate calculation to prefer small bit
rate pre-scalers over larger ones, which is encouraged by the CAN in
Automation.
Kris Bahnsen contributes a patch to fix the links to Technologic
Systems web resources in the sja1000 driver.
Christophe Leroy's patch prepares the mpc5xxx_can driver for upcoming
powerpc header cleanup.
Minghao Chi's patch converts the flexcan driver to use
pm_runtime_resume_and_get().
The next 2 patches target the Xilinx CAN driver. Lukas Bulwahn's patch
fixes an entry in the MAINTAINERS file. A patch by me marks the bit
timing constants as const.
Wolfram Sang's patch documents r8a77961 support on the
renesas,rcar-canfd bindings document.
The next 2 patches are by me and add support for the mcp251863 chip to
the mcp251xfd driver.
The last 7 patches are by Pavel Pisa, Martin Jerabek et al. and add
the ctucanfd driver for the CTU CAN FD IP Core.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Hao [Tue, 19 Apr 2022 08:42:26 +0000 (16:42 +0800)]
net: stmmac: Use readl_poll_timeout_atomic() in atomic state
The init_systime() may be invoked in atomic state. We have observed the
following call trace when running "phc_ctl /dev/ptp0 set" on a Intel
Agilex board.
BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
[<
ffff80000892ef78>] stmmac_set_time+0x34/0x8c
CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-
20220414-yocto-standard+ #567
Hardware name: SoCFPGA Agilex SoCDK (DT)
Call trace:
dump_backtrace.part.0+0xc4/0xd0
show_stack+0x24/0x40
dump_stack_lvl+0x7c/0xa0
dump_stack+0x18/0x34
__might_resched+0x154/0x1c0
__might_sleep+0x58/0x90
init_systime+0x78/0x120
stmmac_set_time+0x64/0x8c
ptp_clock_settime+0x60/0x9c
pc_clock_settime+0x6c/0xc0
__arm64_sys_clock_settime+0x88/0xf0
invoke_syscall+0x5c/0x130
el0_svc_common.constprop.0+0x4c/0x100
do_el0_svc+0x7c/0xa0
el0_svc+0x58/0xcc
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x18c/0x190
So we should use readl_poll_timeout_atomic() here instead of
readl_poll_timeout().
Also adjust the delay time to 10us to fix a "__bad_udelay" build error
reported by "kernel test robot <lkp@intel.com>". I have tested this on
Intel Agilex and NXP S32G boards, there is no delay needed at all.
So the 10us delay should be long enough for most cases.
Fixes:
ff8ed737860e ("net: stmmac: use readl_poll_timeout() function in init_systime()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 20 Apr 2022 10:09:13 +0000 (11:09 +0100)]
Merge branch 'net-sched-flower-num-vlan-tags'
Boris Sukholitko says:
====================
net/sched: flower: match on the number of vlan tags
Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.
For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.
This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.
The following patch series implement number of vlans flower filter. They
add num_of_vlans flower filter as an alternative to vlan ethtype protocol
matching. The end result is that the following command becomes possible:
tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop
Also, from our logs, we have redirect rules such that:
tc filter add dev $GPON ingress flower num_of_vlans $N \
action mirred egress redirect dev $DEV
where N can range from 0 to 3 and $DEV is the function of $N.
Also there are rules setting skb mark based on the number of vlans:
tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
$P action skbedit mark $M
More about the patch series:
- patches 1-2 remove duplicate code by introducing is_key_vlan
helper.
- patch 3, 4 implement num_of_vlans in the dissector and in the
flower.
- patch 5 uses the num_of_vlans filter to allow further matching on
vlan attributes.
Complementary iproute2 patches are being sent separately.
Thanks,
Boris.
- v4: rebased to the latest net-next
- v3:
- more example commands in patch 3 description (request by Jamal)
- patch 5 description made clearer (thanks to Jiri)
- v2:
- add suitable subject prefixes
- more evolved patch 5 description
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Boris Sukholitko [Tue, 19 Apr 2022 08:14:34 +0000 (11:14 +0300)]
net/sched: flower: Consider the number of tags for vlan filters
Before this patch the existence of vlan filters was conditional on the vlan
protocol being matched in the tc rule. For example, the following rule:
tc filter add dev eth1 ingress flower vlan_prio 5
was illegal because vlan protocol (e.g. 802.1q) does not appear in the rule.
Remove the above restriction by looking at the num_of_vlans filter to
allow further matching on vlan attributes. The following rule becomes
legal as a result of this commit:
tc filter add dev eth1 ingress flower num_of_vlans 1 vlan_prio 5
because having num_of_vlans==1 implies that the packet is single tagged.
Change is_vlan_key helper to look at the number of vlans in addition to
the vlan ethertype. The outcome of this change is that outer (e.g. vlan_prio)
and inner (e.g. cvlan_prio) tag vlan filters require the number of vlan
tags to be greater then 0 and 1 accordingly.
As a result of is_vlan_key change, the ethertype may be set to 0 when
matching on the number of vlans. Update fl_set_key_vlan to avoid setting
key, mask vlan_tpid for the 0 ethertype.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Boris Sukholitko [Tue, 19 Apr 2022 08:14:33 +0000 (11:14 +0300)]
net/sched: flower: Add number of vlan tags filter
These are bookkeeping parts of the new num_of_vlans filter.
Defines, dump, load and set are being done here.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Boris Sukholitko [Tue, 19 Apr 2022 08:14:32 +0000 (11:14 +0300)]
flow_dissector: Add number of vlan tags dissector
Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.
For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.
This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.
The goal is to make the following TC commands possible:
tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop
From our logs, we have redirect rules such that:
tc filter add dev $GPON ingress flower num_of_vlans $N \
action mirred egress redirect dev $DEV
where N can range from 0 to 3 and $DEV is the function of $N.
Also there are rules setting skb mark based on the number of vlans:
tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
$P action skbedit mark $M
This new dissector allows extracting the number of vlan tags existing in
the packet.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Boris Sukholitko [Tue, 19 Apr 2022 08:14:31 +0000 (11:14 +0300)]
net/sched: flower: Reduce identation after is_key_vlan refactoring
Whitespace only.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Boris Sukholitko [Tue, 19 Apr 2022 08:14:30 +0000 (11:14 +0300)]
net/sched: flower: Helper function for vlan ethtype checks
There are somewhat repetitive ethertype checks in fl_set_key. Refactor
them into is_vlan_key helper function.
To make the changes clearer, avoid touching identation levels. This is
the job for the next patch in the series.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haowen Bai [Tue, 19 Apr 2022 01:37:31 +0000 (09:37 +0800)]
ar5523: Use kzalloc instead of kmalloc/memset
Use kzalloc rather than duplicating its implementation, which
makes code simple and easy to understand.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca [Mon, 18 Apr 2022 23:35:58 +0000 (20:35 -0300)]
net: dsa: realtek: remove realtek,rtl8367s string
There is no need to add new compatible strings for each new supported
chip version. The compatible string is used only to select the subdriver
(rtl8365mb.c or rtl8366rb.c). Once in the subdriver, it will detect the
chip model by itself, ignoring which compatible string was used.
Link: https://lore.kernel.org/netdev/20220414014055.m4wbmr7tdz6hsa3m@bang-olufsen.dk/
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca [Mon, 18 Apr 2022 23:35:57 +0000 (20:35 -0300)]
dt-bindings: net: dsa: realtek: cleanup compatible strings
Compatible strings are used to help the driver find the chip ID/version
register for each chip family. After that, the driver can setup the
switch accordingly. Keep only the first supported model for each family
as a compatible string and reference other chip models in the
description.
The removed compatible strings have never been used in a released kernel.
CC: devicetree@vger.kernel.org
Link: https://lore.kernel.org/netdev/20220414014055.m4wbmr7tdz6hsa3m@bang-olufsen.dk/
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 20 Apr 2022 09:45:51 +0000 (10:45 +0100)]
Merge branch 'hns3-next'
Guangbin Huang says:
====================
net: hns3: updates for -next
This series includes some updates for the HNS3 ethernet driver.
Change logs:
V1 -> V2:
- Fix failed to apply to net-next problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Tue, 19 Apr 2022 03:27:09 +0000 (11:27 +0800)]
net: hns3: remove unnecessary line wrap for hns3_set_tunable
Remove unnecessary line wrap for hns3_set_tunable to improve
function readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Tue, 19 Apr 2022 03:27:08 +0000 (11:27 +0800)]
net: hns3: replace magic value by HCLGE_RING_REG_OFFSET
Magic values are not recommended.
Signed-off-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Tue, 19 Apr 2022 03:27:07 +0000 (11:27 +0800)]
net: hns3: fix the wrong words in comments
This patch fixes wrong words in comments.
Signed-off-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Tue, 19 Apr 2022 03:27:06 +0000 (11:27 +0800)]
net: hns3: update the comment of function hclgevf_get_mbx_resp
The param of function hclgevf_get_mbx_resp has been changed but the
comments not upodated. This patch updates it.
Signed-off-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Tue, 19 Apr 2022 03:27:05 +0000 (11:27 +0800)]
net: hns3: add log for setting tx spare buf size
For the active tx spare buffer size maybe changed according
to the page size, so add log to notice it.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Tue, 19 Apr 2022 03:27:04 +0000 (11:27 +0800)]
net: hns3: add failure logs in hclge_set_vport_mtu
Currently, There is a low probability that pf mtu configuration fails, but
the information in logs is insufficient for problem locating when the VF
mtu value is illegally modified.
So record the vf index and vf mtu value at the failure scenario.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Tue, 19 Apr 2022 03:27:03 +0000 (11:27 +0800)]
net: hns3: refine the definition for struct hclge_pf_to_vf_msg
The struct hclge_pf_to_vf_msg is used for mailbox message from
PF to VF, including both response and request. But its definition
can only indicate respone, which makes the message data copy in
function hclge_send_mbx_msg() unreadable. So refine it by edding
a general message definition into it.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Tue, 19 Apr 2022 03:27:02 +0000 (11:27 +0800)]
net: hns3: refactor hns3_set_ringparam()
Use struct hns3_ring_param to replace variable new/old_xxx and
add hns3_is_ringparam_changed() to judge them if is changed to
improve code readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Tue, 19 Apr 2022 03:27:01 +0000 (11:27 +0800)]
net: hns3: add ethtool parameter check for CQE/EQE mode
For DEVICE_VERSION_V2, the hardware does not support the CQE mode.
So add capability bit for coalesce CQE mode and add parameter check
for it in ethtool.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 20 Apr 2022 09:42:57 +0000 (10:42 +0100)]
Merge branch 'atlantic-xdp-multi-buffer'
[PATCH net-next v5 0/3] net: atlantic: Add XDP support
@ 2022-04-17 10:12 Taehee Yoo
2022-04-17 10:12 ` [PATCH net-next v5 1/3] net: atlantic: Implement xdp control plane Taehee Yoo
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Taehee Yoo @ 2022-04-17 10:12 UTC (permalink / raw)
To: davem, kuba, pabeni, netdev, irusskikh, ast, daniel, hawk,
john.fastabend, andrii, kafai, songliubraving, yhs, kpsingh, bpf
Cc: ap420073
This patchset is to make atlantic to support multi-buffer XDP.
The first patch implement control plane of xdp.
The aq_xdp(), callback of .xdp_bpf is added.
The second patch implements data plane of xdp.
XDP_TX, XDP_DROP, and XDP_PASS is supported.
__aq_ring_xdp_clean() is added to receive and execute xdp program.
aq_nic_xmit_xdpf() is added to send packet by XDP.
The third patch implements callback of .ndo_xdp_xmit.
aq_xdp_xmit() is added to send redirected packets and it internally
calls aq_nic_xmit_xdpf().
Memory model is MEM_TYPE_PAGE_SHARED.
Order-2 page allocation is used when XDP is enabled.
LRO will be disabled if XDP program doesn't supports multi buffer.
AQC chip supports 32 multi-queues and 8 vectors(irq).
There are two options.
1. under 8 cores and maximum 4 tx queues per core.
2. under 4 cores and maximum 8 tx queues per core.
Like other drivers, these tx queues can be used only for XDP_TX,
XDP_REDIRECT queue. If so, no tx_lock is needed.
But this patchset doesn't use this strategy because getting hardware tx
queue index cost is too high.
So, tx_lock is used in the aq_nic_xmit_xdpf().
single-core, single queue, 80% cpu utilization.
32.30% [kernel] [k] aq_get_rxpages_xdp
10.44% [kernel] [k] aq_hw_read_reg <---------- here
9.86% bpf_prog_xxx_xdp_prog_tx [k] bpf_prog_xxx_xdp_prog_tx
5.51% [kernel] [k] aq_ring_rx_clean
single-core, 8 queues, 100% cpu utilization, half PPS.
52.03% [kernel] [k] aq_hw_read_reg <---------- here
18.24% [kernel] [k] aq_get_rxpages_xdp
4.30% [kernel] [k] hw_atl_b0_hw_ring_rx_receive
4.24% bpf_prog_xxx_xdp_prog_tx [k] bpf_prog_xxx_xdp_prog_tx
2.79% [kernel] [k] aq_ring_rx_clean
Performance result(64 Byte)
1. XDP_TX
a. xdp_geieric, single core
- 2.5Mpps, 100% cpu
b. xdp_driver, single core
- 4.5Mpps, 80% cpu
c. xdp_generic, 8 core(hyper thread)
- 6.3Mpps, 40% cpu
d. xdp_driver, 8 core(hyper thread)
- 6.3Mpps, 30% cpu
2. XDP_REDIRECT
a. xdp_generic, single core
- 2.3Mpps
b. xdp_driver, single core
- 4.5Mpps
v5:
- Use MEM_TYPE_PAGE_SHARED instead of MEM_TYPE_PAGE_ORDER0
- Use 2K frame size instead of 3K
- Use order-2 page allocation instead of order-0
- Rename aq_get_rxpage() to aq_alloc_rxpages()
- Add missing PageFree stats for ethtool
- Remove aq_unset_rxpage_xdp(), introduced by v2 patch due to
change of memory model
- Fix wrong last parameter value of xdp_prepare_buff()
- Add aq_get_rxpages_xdp() to increase page reference count
v4:
- Fix compile warning
v3:
- Change wrong PPS performance result 40% -> 80% in single
core(Intel i3-12100)
- Separate aq_nic_map_xdp() from aq_nic_map_skb()
- Drop multi buffer packets if single buffer XDP is attached
- Disable LRO when single buffer XDP is attached
- Use xdp_get_{frame/buff}_len()
v2:
- Do not use inline in C file
Taehee Yoo (3):
net: atlantic: Implement xdp control plane
net: atlantic: Implement xdp data plane
net: atlantic: Implement .ndo_xdp_xmit handler
.../net/ethernet/aquantia/atlantic/aq_cfg.h | 1 +
.../ethernet/aquantia/atlantic/aq_ethtool.c | 9 +
.../net/ethernet/aquantia/atlantic/aq_main.c | 87 ++++
.../net/ethernet/aquantia/atlantic/aq_main.h | 2 +
.../net/ethernet/aquantia/atlantic/aq_nic.c | 136 ++++++
.../net/ethernet/aquantia/atlantic/aq_nic.h | 5 +
.../net/ethernet/aquantia/atlantic/aq_ring.c | 409 ++++++++++++++++--
.../net/ethernet/aquantia/atlantic/aq_ring.h | 21 +-
.../net/ethernet/aquantia/atlantic/aq_vec.c | 23 +-
.../net/ethernet/aquantia/atlantic/aq_vec.h | 6 +
.../aquantia/atlantic/hw_atl/hw_atl_a0.c | 6 +-
.../aquantia/atlantic/hw_atl/hw_atl_b0.c | 10 +-
12 files changed, 670 insertions(+), 45 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH net-next v5 1/3] net: atlantic: Implement xdp control plane
2022-04-17 10:12 [PATCH net-next v5 0/3] net: atlantic: Add XDP support Taehee Yoo
@ 2022-04-17 10:12 ` Taehee Yoo
2022-04-17 10:12 ` [PATCH net-next v5 2/3] net: atlantic: Implement xdp data plane Taehee Yoo
2022-04-17 10:12 ` [PATCH net-next v5 3/3] net: atlantic: Implement .ndo_xdp_xmit handler Taehee Yoo
2 siblings, 0 replies; 4+ messages in thread
From: Taehee Yoo @ 2022-04-17 10:12 UTC (permalink / raw)
To: davem, kuba, pabeni, netdev, irusskikh, ast, daniel, hawk,
john.fastabend, andrii, kafai, songliubraving, yhs, kpsingh, bpf
Cc: ap420073
aq_xdp() is a xdp setup callback function for Atlantic driver.
When XDP is attached or detached, the device will be restarted because
it uses different headroom, tailroom, and page order value.
If XDP enabled, it switches default page order value from 0 to 2.
Because the default maximum frame size is still 2K and it needs
additional area for headroom and tailroom.
The total size(headroom + frame size + tailroom) is 2624.
So, 1472Bytes will be always wasted for every frame.
But when order-2 is used, these pages can be used 6 times
with flip strategy.
It means only about 106Bytes per frame will be wasted.
Also, It supports xdp fragment feature.
MTU can be 16K if xdp prog supports xdp fragment.
If not, MTU can not exceed 2K - ETH_HLEN - ETH_FCS.
And a static key is added and It will be used to call the xdp_clean
handler in ->poll(). data plane implementation will be contained
the followed patch.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
---
v5:
- Use MEM_TYPE_PAGE_SHARED instead of MEM_TYPE_PAGE_ORDER0
- Use 2K frame size instead of 3K
- Use order-2 page allocation instead of order-0
- Rename aq_get_rxpage() to aq_alloc_rxpages()
v4:
- No changed
v3:
- Disable LRO when single buffer XDP is attached
v2:
- No changed
Taehee Yoo [Sun, 17 Apr 2022 10:12:47 +0000 (10:12 +0000)]
net: atlantic: Implement .ndo_xdp_xmit handler
aq_xdp_xmit() is the callback function of .ndo_xdp_xmit.
It internally calls aq_nic_xmit_xdpf() to send packet.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Sun, 17 Apr 2022 10:12:46 +0000 (10:12 +0000)]
net: atlantic: Implement xdp data plane
It supports XDP_PASS, XDP_DROP and multi buffer.
The new function aq_nic_xmit_xdpf() is used to send packet with
xdp_frame and internally it calls aq_nic_map_xdp().
AQC chip supports 32 multi-queues and 8 vectors(irq).
there are two option
1. under 8 cores and 4 tx queues per core.
2. under 4 cores and 8 tx queues per core.
Like ixgbe, these tx queues can be used only for XDP_TX, XDP_REDIRECT
queue. If so, no tx_lock is needed.
But this patchset doesn't use this strategy because getting hardware tx
queue index cost is too high.
So, tx_lock is used in the aq_nic_xmit_xdpf().
single-core, single queue, 80% cpu utilization.
30.75% bpf_prog_xxx_xdp_prog_tx [k] bpf_prog_xxx_xdp_prog_tx
10.35% [kernel] [k] aq_hw_read_reg <---------- here
4.38% [kernel] [k] get_page_from_freelist
single-core, 8 queues, 100% cpu utilization, half PPS.
45.56% [kernel] [k] aq_hw_read_reg <---------- here
17.58% bpf_prog_xxx_xdp_prog_tx [k] bpf_prog_xxx_xdp_prog_tx
4.72% [kernel] [k] hw_atl_b0_hw_ring_rx_receive
The new function __aq_ring_xdp_clean() is a xdp rx handler and this is
called only when XDP is attached.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Sun, 17 Apr 2022 10:12:45 +0000 (10:12 +0000)]
net: atlantic: Implement xdp control plane
aq_xdp() is a xdp setup callback function for Atlantic driver.
When XDP is attached or detached, the device will be restarted because
it uses different headroom, tailroom, and page order value.
If XDP enabled, it switches default page order value from 0 to 2.
Because the default maximum frame size is still 2K and it needs
additional area for headroom and tailroom.
The total size(headroom + frame size + tailroom) is 2624.
So, 1472Bytes will be always wasted for every frame.
But when order-2 is used, these pages can be used 6 times
with flip strategy.
It means only about 106Bytes per frame will be wasted.
Also, It supports xdp fragment feature.
MTU can be 16K if xdp prog supports xdp fragment.
If not, MTU can not exceed 2K - ETH_HLEN - ETH_FCS.
And a static key is added and It will be used to call the xdp_clean
handler in ->poll(). data plane implementation will be contained
the followed patch.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 20 Apr 2022 09:34:34 +0000 (10:34 +0100)]
Merge branch 'dsa-cross-chip-notifier-cleanup'
Vladimir Oltean says:
====================
DSA cross-chip notifier cleanups
This patch set makes the following improvements:
- Cross-chip notifiers pass a switch index, port index, sometimes tree
index, all as integers. Sometimes we need to recover the struct
dsa_port based on those integers. That recovery involves traversing a
list. By passing directly a pointer to the struct dsa_port we can
avoid that, and the indices passed previously can still be obtained
from the passed struct dsa_port.
- Resetting VLAN filtering on a switch has explicit code to make it run
on a single switch, so it has no place to stay in the cross-chip
notifier code. Move it out.
- Changing the MTU on a user port affects only that single port, yet the
code passes through the cross-chip notifier layer where all switches
are notified. Avoid that.
- Other related cosmetic changes in the MTU changing procedure.
Apart from the slight improvement in performance given by
(a) doing less work in cross-chip notifiers
(b) emitting less cross-chip notifiers
we also end up with about 100 less lines of code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 15 Apr 2022 15:46:26 +0000 (18:46 +0300)]
net: dsa: don't emit targeted cross-chip notifiers for MTU change
A cross-chip notifier with "targeted_match=true" is one that matches
only the local port of the switch that emitted it. In other words,
passing through the cross-chip notifier layer serves no purpose.
Eliminate this concept by calling directly ds->ops->port_change_mtu
instead of emitting a targeted cross-chip notifier. This leaves the
DSA_NOTIFIER_MTU event being emitted only for MTU updates on the CPU
port, which need to be reflected also across all DSA links.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 15 Apr 2022 15:46:25 +0000 (18:46 +0300)]
net: dsa: drop dsa_slave_priv from dsa_slave_change_mtu
We can get a hold of the "ds" pointer directly from "dp", no need for
the dsa_slave_priv.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 15 Apr 2022 15:46:24 +0000 (18:46 +0300)]
net: dsa: avoid one dsa_to_port() in dsa_slave_change_mtu
We could retrieve the cpu_dp pointer directly from the "dp" we already
have, no need to resort to dsa_to_port(ds, port).
This change also removes the need for an "int port", so that is also
deleted.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 15 Apr 2022 15:46:23 +0000 (18:46 +0300)]
net: dsa: use dsa_tree_for_each_user_port in dsa_slave_change_mtu
Use the more conventional iterator over user ports instead of explicitly
ignoring them, and use the more conventional name "other_dp" instead of
"dp_iter", for readability.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 15 Apr 2022 15:46:22 +0000 (18:46 +0300)]
net: dsa: make cross-chip notifiers more efficient for host events
To determine whether a given port should react to the port targeted by
the notifier, dsa_port_host_vlan_match() and dsa_port_host_address_match()
look at the positioning of the switch port currently executing the
notifier relative to the switch port for which the notifier was emitted.
To maintain stylistic compatibility with the other match functions from
switch.c, the host address and host VLAN match functions take the
notifier information about targeted port, switch and tree indices as
argument. However, these functions only use that information to retrieve
the struct dsa_port *targeted_dp, which is an invariant for the outer
loop that calls them. So it makes more sense to calculate the targeted
dp only once, and pass it to them as argument.
But furthermore, the targeted dp is actually known at the time the call
to dsa_port_notify() is made. It is just that we decide to only save the
indices of the port, switch and tree in the notifier structure, just to
retrace our steps and find the dp again using dsa_switch_find() and
dsa_to_port().
But both the above functions are relatively expensive, since they need
to iterate through lists. It appears more straightforward to make all
notifiers just pass the targeted dp inside their info structure, and
have the code that needs the indices to look at info->dp->index instead
of info->port, or info->dp->ds->index instead of info->sw_index, or
info->dp->ds->dst->index instead of info->tree_index.
For the sake of consistency, all cross-chip notifiers are converted to
pass the "dp" directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 15 Apr 2022 15:46:21 +0000 (18:46 +0300)]
net: dsa: move reset of VLAN filtering to dsa_port_switchdev_unsync_attrs
In dsa_port_switchdev_unsync_attrs() there is a comment that resetting
the VLAN filtering isn't done where it is expected. And since commit
108dc8741c20 ("net: dsa: Avoid cross-chip syncing of VLAN filtering"),
there is no reason to handle this in switch.c either.
Therefore, move the logic to port.c, and adapt it slightly to the data
structures and naming conventions from there.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Wed, 13 Apr 2022 14:00:00 +0000 (16:00 +0200)]
doc/ip-sysctl: add bc_forwarding
Let's describe this sysctl.
Fixes:
5cbf777cfdf6 ("route: add support for directed broadcast forwarding")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Song Liu [Fri, 15 Apr 2022 16:44:10 +0000 (09:44 -0700)]
vmalloc: replace VM_NO_HUGE_VMAP with VM_ALLOW_HUGE_VMAP
Huge page backed vmalloc memory could benefit performance in many cases.
However, some users of vmalloc may not be ready to handle huge pages for
various reasons: hardware constraints, potential pages split, etc.
VM_NO_HUGE_VMAP was introduced to allow vmalloc users to opt-out huge
pages. However, it is not easy to track down all the users that require
the opt-out, as the allocation are passed different stacks and may cause
issues in different layers.
To address this issue, replace VM_NO_HUGE_VMAP with an opt-in flag,
VM_ALLOW_HUGE_VMAP, so that users that benefit from huge pages could ask
specificially.
Also, remove vmalloc_no_huge() and add opt-in helper vmalloc_huge().
Fixes:
fac54e2bfb5b ("x86/Kconfig: Select HAVE_ARCH_HUGE_VMALLOC with HAVE_ARCH_HUGE_VMAP")
Link: https://lore.kernel.org/netdev/14444103-d51b-0fb3-ee63-c3f182f0b546@molgen.mpg.de/"
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 19 Apr 2022 17:30:43 +0000 (10:30 -0700)]
Merge tag 'spi-fix-v5.18-rc3' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more fixes for SPI, plus one new PCI ID for another Intel
chipset.
All device specific stuff"
* tag 'spi-fix-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controller
spi: cadence-quadspi: fix incorrect supports_op() return value
spi: intel: Add support for Raptor Lake-S SPI serial flash
spi: spi-mtk-nor: initialize spi controller after resume
Christian Brauner [Tue, 19 Apr 2022 13:14:23 +0000 (15:14 +0200)]
fs: fix acl translation
Last cycle we extended the idmapped mounts infrastructure to support
idmapped mounts of idmapped filesystems (No such filesystem yet exist.).
Since then, the meaning of an idmapped mount is a mount whose idmapping
is different from the filesystems idmapping.
While doing that work we missed to adapt the acl translation helpers.
They still assume that checking for the identity mapping is enough. But
they need to use the no_idmapping() helper instead.
Note, POSIX ACLs are always translated right at the userspace-kernel
boundary using the caller's current idmapping and the initial idmapping.
The order depends on whether we're coming from or going to userspace.
The filesystem's idmapping doesn't matter at the border.
Consequently, if a non-idmapped mount is passed we need to make sure to
always pass the initial idmapping as the mount's idmapping and not the
filesystem idmapping. Since it's irrelevant here it would yield invalid
ids and prevent setting acls for filesystems that are mountable in a
userns and support posix acls (tmpfs and fuse).
I verified the regression reported in [1] and verified that this patch
fixes it. A regression test will be added to xfstests in parallel.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215849
Fixes:
bd303368b776 ("fs: support mapped mounts of mapped filesystems")
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # 5.17
Cc: <regressions@lists.linux.dev>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Pisa [Mon, 21 Mar 2022 23:32:34 +0000 (00:32 +0100)]
MAINTAINERS: Add maintainers for CTU CAN FD IP core driver
This patch adds an entry for the CTU CAN FD IP to the maintainers
file.
Link: https://lore.kernel.org/all/2cc77e2999d9688bed155e4c7f7807e46d1bf9e3.1647904780.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pavel Pisa [Tue, 22 Mar 2022 07:21:09 +0000 (08:21 +0100)]
docs: ctucanfd: CTU CAN FD open-source IP core documentation.
CTU CAN FD IP core documentation based on Martin Jeřábek's diploma theses
Open-source and Open-hardware CAN FD Protocol Support
https://dspace.cvut.cz/handle/10467/80366
.
Link: https://lore.kernel.org/all/692b965999ff6c272239df0fe1c76b68d02b134d.1647932262.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Martin Jerabek <martin.jerabek01@gmail.com>
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>