Laurent Pinchart [Sun, 24 Sep 2023 15:32:53 +0000 (18:32 +0300)]
media: i2c: imx219: Drop IMX219_REG_CSI_LANE_MODE from common regs array
[ Upstream commit
ec80c606cca5f7a676febde10d63f5532f57e8e7 ]
The IMX219_REG_CSI_LANE_MODE is configured twice, once with a hardcoded
value in the imx219_common_regs registers array, and once with the value
appropriate for the system in imx219_configure_lanes(). The latter is
enough, drop the former.
Fixes:
ceddfd4493b3 ("media: i2c: imx219: Support four-lane operation")
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurent Pinchart [Sun, 24 Sep 2023 15:32:52 +0000 (18:32 +0300)]
media: i2c: imx219: Replace register addresses with macros
[ Upstream commit
1c9083565a4698ff072f1209e9450ff6c305e2cc ]
Define macros for all the known registers used in the register arrays,
and use them to replace the numerical addresses. This improves
readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of:
ec80c606cca5 ("media: i2c: imx219: Drop IMX219_REG_CSI_LANE_MODE from common regs array")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurent Pinchart [Sun, 24 Sep 2023 15:32:50 +0000 (18:32 +0300)]
media: i2c: imx219: Convert to CCI register access helpers
[ Upstream commit
852798cc8a45362ea7667c754b8ca0575a680a45 ]
Use the new common CCI register access helpers to replace the private
register access helpers in the imx219 driver. This simplifies the driver
by reducing the amount of code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of:
ec80c606cca5 ("media: i2c: imx219: Drop IMX219_REG_CSI_LANE_MODE from common regs array")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Mon, 11 Sep 2023 18:46:12 +0000 (20:46 +0200)]
media: cedrus: Fix clock/reset sequence
[ Upstream commit
36fe515c1a3cd5eac148e8a591a82108d92d5522 ]
According to H6 user manual, resets should always be de-asserted before
clocks are enabled. This is also consistent with vendor driver.
Fixes:
d5aecd289bab ("media: cedrus: Implement runtime PM")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Mon, 19 Jun 2023 08:12:02 +0000 (16:12 +0800)]
media: vidtv: mux: Add check and kfree for kstrdup
[ Upstream commit
1fd6eb12642e0c32692924ff359c07de4b781d78 ]
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Moreover, use kfree() in the later error handling in order to avoid
memory leak.
Fixes:
c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Mon, 19 Jun 2023 08:12:01 +0000 (16:12 +0800)]
media: vidtv: psi: Add check for kstrdup
[ Upstream commit
76a2c5df6ca8bd8ada45e953b8c72b746f42918d ]
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Fixes:
7a7899f6f58e ("media: vidtv: psi: Implement an Event Information Table (EIT)")
Fixes:
c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Fixes:
f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Katya Orlova [Fri, 22 Sep 2023 11:55:06 +0000 (14:55 +0300)]
media: s3c-camif: Avoid inappropriate kfree()
[ Upstream commit
61334819aca018c3416ee6c330a08a49c1524fc3 ]
s3c_camif_register_video_node() works with video_device structure stored
as a field of camif_vp, so it should not be kfreed.
But there is video_device_release() on error path that do it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fei Shao [Fri, 8 Sep 2023 13:28:04 +0000 (21:28 +0800)]
media: mtk-jpegenc: Fix bug in JPEG encode quality selection
[ Upstream commit
0aeccc63f3bc4cfd49dc4893da1409402ee6b295 ]
The driver uses the upper-bound approach to decide the target JPEG
encode quality, but there's a logic bug that if the desired quality is
higher than what the driver can support, the driver falls back to using
the worst quality.
Fix the bug by assuming using the best quality in the beginning, and
with trivial refactor to avoid long lines.
Fixes:
45f13a57d813 ("media: platform: Add jpeg enc feature")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Qian [Thu, 7 Sep 2023 01:51:00 +0000 (09:51 +0800)]
media: amphion: handle firmware debug message
[ Upstream commit
6496617b2b06d7004a5cbd53d48f19567d6b018c ]
decoder firmware may notify host some debug message,
it can help analyze the state of the firmware in case of error
Fixes:
9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Wang [Thu, 13 Apr 2023 03:49:42 +0000 (11:49 +0800)]
media: bttv: fix use after free error due to btv->timeout timer
[ Upstream commit
bd5b50b329e850d467e7bcc07b2b6bde3752fbda ]
There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.
This bug is found by static analysis, it may be false positive.
Fix it by adding del_timer_sync invoking to the remove function.
cpu0 cpu1
bttv_probe
->timer_setup
->bttv_set_dma
->mod_timer;
bttv_remove
->kfree(btv);
->bttv_irq_timeout
->USE btv
Fixes:
162e6376ac58 ("media: pci: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaolei Wang [Mon, 7 Aug 2023 09:05:35 +0000 (17:05 +0800)]
media: ov5640: Fix a memory leak when ov5640_probe fails
[ Upstream commit
20290feaaeb76cc719921aad275ccb18662a7c3a ]
sensor->ctrls.handler is initialized in ov5640_init_controls(),
so when the sensor is not connected and ov5640_sensor_resume()
fails, sensor->ctrls.handler should be released, otherwise a
memory leak will be detected:
unreferenced object 0xc674ca80 (size 64):
comm "swapper/0", pid 1, jiffies
4294938337 (age 204.880s)
hex dump (first 32 bytes):
80 55 75 c6 80 54 75 c6 00 55 75 c6 80 52 75 c6 .Uu..Tu..Uu..Ru.
00 53 75 c6 00 00 00 00 00 00 00 00 00 00 00 00 .Su..........
Fixes:
85644a9b37ec ("media: ov5640: Use runtime PM")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Fri, 25 Aug 2023 22:13:40 +0000 (00:13 +0200)]
media: i2c: max9286: Fix some redundant of_node_put() calls
[ Upstream commit
0822315e46b400f611cba1193456ee6a5dc3e41d ]
This is odd to have a of_node_put() just after a for_each_child_of_node()
or a for_each_endpoint_of_node() loop. It should already be called
during the last iteration.
Remove these calls.
Fixes:
66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guoniu.zhou [Wed, 19 Jul 2023 07:30:12 +0000 (15:30 +0800)]
media: ov5640: fix vblank unchange issue when work at dvp mode
[ Upstream commit
8fc29e3c9f682d4ad9b0764d44ecc6c19b000051 ]
The value of V4L2_CID_VBLANK control is initialized to default vblank
value of 640x480 when driver probe. When OV5640 work at DVP mode, the
control value won't update and lead to sensor can't output data if the
resolution remain the same as last time since incorrect total vertical
size. So update it when there is a new value applied.
Fixes:
bce93b827de6 ("media: ov5640: Add VBLANK control")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 19 Jul 2023 10:16:10 +0000 (13:16 +0300)]
media: ov13b10: Fix some error checking in probe
[ Upstream commit
d66b45e1b082462c3e14528b83e18ee92362e456 ]
The "ret = " assignment was missing, so ov13b10_power_on() is not
checked for errors. Add the assignment.
Fixes:
6e28afd15228 ("media: ov13b10: add PM control support based on power resources")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Thu, 24 Aug 2023 01:39:35 +0000 (03:39 +0200)]
media: verisilicon: Do not enable G2 postproc downscale if source is narrower than destination
[ Upstream commit
6e481d52d363218a3e6feb31694da74b38b30fad ]
In case of encoded input VP9 data width that is not multiple of macroblock
size, which is 16 (e.g. 1080x1920 frames, where 1080 is multiple of 8), the
width is padded to be a multiple of macroblock size (for 1080x1920 frames,
that is 1088x1920).
The hantro_postproc_g2_enable() checks whether the encoded data width is
equal to decoded frame width, and if not, enables down-scale mode. For a
frame where input is 1080x1920 and output is 1088x1920, this is incorrect
as no down-scale happens, the frame is only padded. Enabling the down-scale
mode in this case results in corrupted frames.
Fix this by adjusting the check to test whether encoded data width is
greater than decoded frame width, and only in that case enable the
down-scale mode.
To generate input test data to trigger this bug, use e.g.:
$ gst-launch-1.0 videotestsrc ! video/x-raw,width=272,height=256,format=I420 ! \
vp9enc ! matroskamux ! filesink location=/tmp/test.vp9
To trigger the bug upon decoding (note that the NV12 must be forced, as
that assures the output data would pass the G2 postproc):
$ gst-launch-1.0 filesrc location=/tmp/test.vp9 ! matroskademux ! vp9parse ! \
v4l2slvp9dec ! video/x-raw,format=NV12 ! videoconvert ! fbdevsink
Fixes:
79c987de8b35 ("media: hantro: Use post processor scaling capacities")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Thu, 24 Aug 2023 01:38:58 +0000 (03:38 +0200)]
media: hantro: Check whether reset op is defined before use
[ Upstream commit
88d4b23a629ebd34f682f770cb6c2116c851f7b8 ]
The i.MX8MM/N/P does not define the .reset op since reset of the VPU is
done by genpd. Check whether the .reset op is defined before calling it
to avoid NULL pointer dereference.
Note that the Fixes tag is set to the commit which removed the reset op
from i.MX8M Hantro G2 implementation, this is because before this commit
all the implementations did define the .reset op.
Fixes:
6971efb70ac3 ("media: hantro: Allow i.MX8MQ G1 and G2 to run independently")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Qian [Tue, 22 Aug 2023 01:45:06 +0000 (09:45 +0800)]
media: imx-jpeg: initiate a drain of the capture queue in dynamic resolution change
[ Upstream commit
1c2786632e20c8f0fd4004fae3b3490276e5e5da ]
The last buffer from before the change must be marked,
with the V4L2_BUF_FLAG_LAST flag,
similarly to the Drain sequence above.
Meanwhile if V4L2_DEC_CMD_STOP is sent before
the source change triggered,
we need to restore the is_draing flag after
the draining in dynamic resolution change.
Fixes:
b4e1fb8643da ("media: imx-jpeg: Support dynamic resolution change")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Sat, 12 Nov 2022 09:29:24 +0000 (17:29 +0800)]
pcmcia: ds: fix possible name leak in error path in pcmcia_device_add()
[ Upstream commit
99e1241049a92dd3e9a90a0f91e32ce390133278 ]
Afer commit
1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically.
Therefore, it needs to be freed, which is done by the driver core for
us once all references to the device are gone. Therefore, move the
dev_set_name() call immediately before the call device_register(), which
either succeeds (then the freeing will be done upon subsequent remvoal),
or puts the reference in the error call. Also, it is not unusual that the
return value of dev_set_name is not checked.
Fixes:
1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message modified]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Sat, 12 Nov 2022 09:29:23 +0000 (17:29 +0800)]
pcmcia: ds: fix refcount leak in pcmcia_device_add()
[ Upstream commit
402ab979b29126068e0b596b641422ff7490214c ]
As the comment of device_register() says, it should use put_device()
to give up the reference in the error path. Then, insofar resources
will be freed in pcmcia_release_dev(), the error path is no longer
needed. In particular, this means that the (previously missing) dropping
of the reference to &p_dev->function_config->ref is now handled by
pcmcia_release_dev().
Fixes:
360b65b95bae ("[PATCH] pcmcia: make config_t independent, add reference counting")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message rewrite]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Sat, 12 Nov 2022 09:25:41 +0000 (17:25 +0800)]
pcmcia: cs: fix possible hung task and memory leak pccardd()
[ Upstream commit
e3ea1b4847e49234e691c0d66bf030bd65bb7f2b ]
If device_register() returns error in pccardd(), it leads two issues:
1. The socket_released has never been completed, it will block
pcmcia_unregister_socket(), because of waiting for completion
of socket_released.
2. The device name allocated by dev_set_name() is leaked.
Fix this two issues by calling put_device() when device_register() fails.
socket_released can be completed in pcmcia_release_socket(), the name can
be freed in kobject_cleanup().
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Tue, 31 Oct 2023 21:09:19 +0000 (14:09 -0700)]
cxl/hdm: Remove broken error path
[ Upstream commit
5d09c63f11f083707b60c8ea0bb420651c47740f ]
Dan reports that cxl_decoder_commit() potentially leaks a hold of
cxl_dpa_rwsem. The potential error case is a "should not" happen
scenario, turn it into a "can not" happen scenario by adding the error
check to cxl_port_setup_targets() where other setting validation occurs.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: http://lore.kernel.org/r/
63295673-5d63-4919-b851-
3b06d48734c0@moroto.mountain
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Fixes:
176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Wed, 18 Oct 2023 17:16:56 +0000 (19:16 +0200)]
cxl/port: Fix @host confusion in cxl_dport_setup_regs()
[ Upstream commit
33d9c987bf8fb68a9292aba7cc4b1711fcb1be4d ]
commit
5d2ffbe4b81a ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")
...moved the dport component registers from a raw component_reg_phys
passed in at dport instantiation time to a 'struct cxl_register_map'
populated with both the component register data *and* the "host" device
for mapping operations.
While typical CXL switch dports are mapped by their associated 'struct
cxl_port', an RCH host bridge dport registered by cxl_acpi needs to wait
until the cxl_mem driver makes the attachment to map the registers. This
is because there are no intervening 'struct cxl_port' instances between
the root cxl_port and the endpoint port in an RCH topology.
For now just mark the host as NULL in the RCH dport case until code that
needs to map the dport registers arrives.
This patch is not flagged for -stable since nothing in the current
driver uses the dport->comp_map.
Now, I am slightly uneasy that cxl_setup_comp_regs() sets map->host to a
wrong value and then cxl_dport_setup_regs() fixes it up, but the
alternatives I came up with are more messy. For example, adding an
@logdev to 'struct cxl_register_map' that the dev_printk()s can fall
back to when @host is NULL. I settled on "post-fixup+comment" since it
is only RCH dports that have this special case where register probing is
split between a host-bridge RCRB lookup and when cxl_mem_probe() does
the association of the cxl_memdev and endpoint port.
[moved rename of @comp_map to @reg_map into next patch]
Fixes:
5d2ffbe4b81a ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-4-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Richter [Wed, 18 Oct 2023 17:16:55 +0000 (19:16 +0200)]
cxl/core/regs: Rename @dev to @host in struct cxl_register_map
[ Upstream commit
dd22581f89537163f065e8ef7c125ce0fddf62cc ]
The primary role of @dev is to host the mappings for devm operations.
@dev is too ambiguous as a name. I.e. when does @dev refer to the
'struct device *' instance that the registers belong, and when does
@dev refer to the 'struct device *' instance hosting the mapping for
devm operations?
Clarify the role of @dev in cxl_register_map by renaming it to @host.
Also, rename local variables to 'host' where map->host is used.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-3-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of:
33d9c987bf8f ("cxl/port: Fix @host confusion in cxl_dport_setup_regs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Zhijian [Wed, 25 Oct 2023 08:54:50 +0000 (16:54 +0800)]
cxl/region: Fix cxl_region_rwsem lock held when returning to user space
[ Upstream commit
3531b27f1f04a6bc9c95cf00d40efe618d57aa93 ]
Fix a missed "goto out" to unlock on error to cleanup this splat:
WARNING: lock held when returning to user space!
6.6.0-rc3-lizhijian+ #213 Not tainted
------------------------------------------------
cxl/673 is leaving the kernel with locks still held!
1 lock held by cxl/673:
#0:
ffffffffa013b9d0 (cxl_region_rwsem){++++}-{3:3}, at: commit_store+0x7d/0x3e0 [cxl_core]
In terms of user visible impact of this bug for backports:
cxl_region_invalidate_memregion() on x86 invokes wbinvd which is a
problematic instruction for virtualized environments. So, on virtualized
x86, cxl_region_invalidate_memregion() returns an error. This failure
case got missed because CXL memory-expander device passthrough is not a
production use case, and emulation of CXL devices is typically limited
to kernel development builds with CONFIG_CXL_REGION_INVALIDATION_TEST=y,
that makes cxl_region_invalidate_memregion() succeed.
In other words, the expected exposure of this bug is limited to CXL
subsystem development environments using QEMU that neglected
CONFIG_CXL_REGION_INVALIDATION_TEST=y.
Fixes:
d1257d098a5a ("cxl/region: Move cache invalidation before region teardown, and before setup")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231025085450.2514906-1-lizhijian@fujitsu.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alison Schofield [Wed, 25 Oct 2023 20:01:34 +0000 (13:01 -0700)]
cxl/region: Use cxl_calc_interleave_pos() for auto-discovery
[ Upstream commit
0cf36a85c1408f86a967fb1db721de1b89b9e675 ]
For auto-discovered regions the driver must assign each target to
a valid position in the region interleave set based on the decoder
topology.
The current implementation fails to parse valid decode topologies,
as it does not consider the child offset into a parent port. The sort
put all targets of one port ahead of another port when an interleave
was expected, causing the region assembly to fail.
Replace the existing relative sort with cxl_calc_interleave_pos() that
finds the exact position in a region interleave for an endpoint based
on a walk up the ancestral tree from endpoint to root decoder.
cxl_calc_interleave_pos() was introduced in a prior patch, so the work
here is to use it in cxl_region_sort_targets().
Remove the obsoleted helper functions from the prior sort.
Testing passes on pre-production hardware with BIOS defined regions
that natively trigger this autodiscovery path of the region driver.
Testing passes a CXL unit test using the dev_dbg() calculation test
(see cxl_region_attach()) across an expanded set of region configs:
1, 1, 1+1, 1+1+1, 2, 2+2, 2+2+2, 2+2+2+2, 4, 4+4, where each number
represents the count of endpoints per host bridge.
Fixes:
a32320b71f08 ("cxl/region: Add region autodiscovery")
Reported-by: Dmytro Adamenko <dmytro.adamenko@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/3946cc55ddc19678733eddc9de2c317749f43f3b.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alison Schofield [Fri, 27 Oct 2023 20:04:48 +0000 (13:04 -0700)]
cxl/region: Calculate a target position in a region interleave
[ Upstream commit
a3e00c964fb943934af916f48f0dd43b5110c866 ]
Introduce a calculation to find a target's position in a region
interleave. Perform a self-test of the calculation on user-defined
regions.
The region driver uses the kernel sort() function to put region
targets in relative order. Positions are assigned based on each
target's index in that sorted list. That relative sort doesn't
consider the offset of a port into its parent port which causes
some auto-discovered regions to fail creation. In one failure case,
a 2 + 2 config (2 host bridges each with 2 endpoints), the sort
puts all the targets of one port ahead of another port when they
were expected to be interleaved.
In preparation for repairing the autodiscovery region assembly,
introduce a new method for discovering a target position in the
region interleave.
cxl_calc_interleave_pos() adds a method to find the target position by
ascending from an endpoint to a root decoder. The calculation starts
with the endpoint's local position and position in the parent port. It
traverses towards the root decoder and examines both position and ways
in order to allow the position to be refined all the way to the root
decoder.
This calculation: position = position * parent_ways + parent_pos;
applied iteratively yields the correct position.
Include a self-test that exercises this new position calculation against
every successfully configured user-defined region.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/0ac32c75cf81dd8b86bf07d70ff139d33c2300bc.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of:
0cf36a85c140 ("cxl/region: Use cxl_calc_interleave_pos() for auto-discovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alison Schofield [Thu, 26 Oct 2023 15:46:54 +0000 (08:46 -0700)]
cxl/region: Prepare the decoder match range helper for reuse
[ Upstream commit
1110581412c7a223439bb3ecdcdd9f4432e08231 ]
match_decoder_by_range() and decoder_match_range() both determine
if an HPA range matches a decoder. The first does it for root
decoders and the second one operates on switch decoders.
Tidy these up with clear naming and make the switch helper more
like the root decoder helper in style and functionality. Make it
take the actual range, rather than an endpoint decoder from which
it extracts the range. Require an exact match on switch decoders,
because unlike a root decoder that maps an entire region, Linux
only supports 1:1 mapping of switch to endpoint decoders. Note that
root-decoders are a super-set of switch-decoders and the range they
cover is a super-set of a region, hence the use of range_contains() for
that case.
Aside from aesthetics and maintainability, this is in preparation
for reuse.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/011b1f498e1758bb8df17c5951be00bd8d489e3b.1698263080.git.alison.schofield@intel.com
[djbw: fixup root decoder vs switch decoder range checks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of:
0cf36a85c140 ("cxl/region: Use cxl_calc_interleave_pos() for auto-discovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javier Carrasco [Fri, 13 Oct 2023 14:34:21 +0000 (16:34 +0200)]
rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call
[ Upstream commit
2be36c09b6b07306be33519e1aa70d2e2a2161bb ]
The current implementation passes PIN_IO_INTA_OUT (2) as a mask and
PIN_IO_INTAPM (GENMASK(1, 0)) as a value.
Swap the variables to assign mask and value the right way.
This error was first introduced with the alarm support. For better or
worse it worked as expected because 0x02 was applied as a mask to 0x03,
resulting 0x02 anyway. This will of course not work for any other value.
Fixes:
e5aac267a10a ("rtc: pcf85363: add alarm support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231013-topic-pcf85363_regmap_update_bits-v1-1-c454f016f71f@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Tue, 10 Oct 2023 19:53:33 +0000 (12:53 -0700)]
virt: sevguest: Fix passing a stack buffer as a scatterlist target
[ Upstream commit
db10cb9b574675402bfd8fe1a31aafdd45b002df ]
CONFIG_DEBUG_SG highlights that get_{report,ext_report,derived_key)()}
are passing stack buffers as the @req_buf argument to
handle_guest_request(), generating a Call Trace of the following form:
WARNING: CPU: 0 PID: 1175 at include/linux/scatterlist.h:187 enc_dec_message+0x518/0x5b0 [sev_guest]
[..]
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:enc_dec_message+0x518/0x5b0 [sev_guest]
Call Trace:
<TASK>
[..]
handle_guest_request+0x135/0x520 [sev_guest]
get_ext_report+0x1ec/0x3e0 [sev_guest]
snp_guest_ioctl+0x157/0x200 [sev_guest]
Note that the above Call Trace was with the DEBUG_SG BUG_ON()s converted
to WARN_ON()s.
This is benign as long as there are no hardware crypto accelerators
loaded for the aead cipher, and no subsequent dma_map_sg() is performed
on the scatterlist. However, sev-guest can not assume the presence of
an aead accelerator nor can it assume that CONFIG_DEBUG_SG is disabled.
Resolve this bug by allocating virt_addr_valid() memory, similar to the
other buffers am @snp_dev instance carries, to marshal requests from
user buffers to kernel buffers.
Reported-by: Peter Gonda <pgonda@google.com>
Closes: http://lore.kernel.org/r/CAMkAt6r2VPPMZ__SQfJse8qWsUyYW3AgYbOUVM0S_Vtk=KvkxQ@mail.gmail.com
Fixes:
fce96cf04430 ("virt: Add SEV-SNP guest driver")
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dionna Glaze <dionnaglaze@google.com>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Fri, 29 Sep 2023 01:02:07 +0000 (18:02 -0700)]
cxl/mem: Fix shutdown order
[ Upstream commit
88d3917f82ed4215a2154432c26de1480a61b209 ]
Ira reports that removing cxl_mock_mem causes a crash with the following
trace:
BUG: kernel NULL pointer dereference, address:
0000000000000044
[..]
RIP: 0010:cxl_region_decode_reset+0x7f/0x180 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x29/0x40 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
bus_remove_device+0xd7/0x150
device_del+0x155/0x3e0
device_unregister+0x13/0x60
devm_release_action+0x4d/0x90
? __pfx_unregister_port+0x10/0x10 [cxl_core]
delete_endpoint+0x121/0x130 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
bus_remove_device+0xd7/0x150
device_del+0x155/0x3e0
? lock_release+0x142/0x290
cdev_device_del+0x15/0x50
cxl_memdev_unregister+0x54/0x70 [cxl_core]
This crash is due to the clearing out the cxl_memdev's driver context
(@cxlds) before the subsystem is done with it. This is ultimately due to
the region(s), that this memdev is a member, being torn down and expecting
to be able to de-reference @cxlds, like here:
static int cxl_region_decode_reset(struct cxl_region *cxlr, int count)
...
if (cxlds->rcd)
goto endpoint_reset;
...
Fix it by keeping the driver context valid until memdev-device
unregistration, and subsequently the entire stack of related
dependencies, unwinds.
Fixes:
9cc238c7a526 ("cxl/pci: Introduce cdevm_file_operations")
Reported-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Thu, 5 Oct 2023 01:35:01 +0000 (18:35 -0700)]
cxl/memdev: Fix sanitize vs decoder setup locking
[ Upstream commit
339818380868e34ff2c482db05031bf47a67d609 ]
The sanitize operation is destructive and the expectation is that the
device is unmapped while in progress. The current implementation does a
lockless check for decoders being active, but then does nothing to
prevent decoders from racing to be committed. Introduce state tracking
to resolve this race.
This incidentally cleans up unpriveleged userspace from triggering mmio
read cycles by spinning on reading the 'security/state' attribute. Which
at a minimum is a waste since the kernel state machine can cache the
completion result.
Lastly cxl_mem_sanitize() was mistakenly marked EXPORT_SYMBOL() in the
original implementation, but an export was never required.
Fixes:
0c36b6ad436a ("cxl/mbox: Add sanitization handling machinery")
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Wed, 4 Oct 2023 23:49:36 +0000 (16:49 -0700)]
cxl/pci: Fix sanitize notifier setup
[ Upstream commit
5f2da19714465739da2449253b13ac06cb353a26 ]
Fix a race condition between the mailbox-background command interrupt
firing and the security-state sysfs attribute being removed.
The race is difficult to see due to the awkward placement of the
sanitize-notifier setup code and the multiple places the teardown calls
are made, cxl_memdev_security_init() and cxl_memdev_security_shutdown().
Unify setup in one place, cxl_sanitize_setup_notifier(). Arrange for
the paired cxl_sanitize_teardown_notifier() to safely quiet the notifier
and let the cxl_memdev + irq be unregistered later in the flow.
Note: The special wrinkle of the sanitize notifier is that it interacts
with interrupts, which are enabled early in the flow, and it interacts
with memdev sysfs which is not initialized until late in the flow. Hence
why this setup routine takes an @cxlmd argument, and not just @mds.
This fix is also needed as a preparation fix for a memdev unregistration
crash.
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/
20230929100316.
00004546@Huawei.com
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Fixes:
0c36b6ad436a ("cxl/mbox: Add sanitization handling machinery")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Wed, 4 Oct 2023 23:04:49 +0000 (16:04 -0700)]
cxl/pci: Clarify devm host for memdev relative setup
[ Upstream commit
f29a824b0b6710328a78b018de3c2cfa9db65876 ]
It is all too easy to get confused about @dev usage in the CXL driver
stack. Before adding a new cxl_pci_probe() setup operation that has a
devm lifetime dependent on @cxlds->dev binding, but also references
@cxlmd->dev, and prints messages, rework the devm_cxl_add_memdev() and
cxl_memdev_setup_fw_upload() function signatures to make this
distinction explicit. I.e. pass in the devm context as an @host argument
rather than infer it from other objects.
This is in preparation for adding a devm_cxl_sanitize_setup_notifier().
Note the whitespace fixup near the change of the devm_cxl_add_memdev()
signature. That uncaught typo originated in the patch that added
cxl_memdev_security_init().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of:
5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Wed, 4 Oct 2023 23:24:39 +0000 (16:24 -0700)]
cxl/pci: Remove inconsistent usage of dev_err_probe()
[ Upstream commit
2627c995c15dc375f4b5a591d782a14b1c0e3e7d ]
If dev_err_probe() is to be used it should at least be used consistently
within the same function. It is also worth questioning whether
every potential -ENOMEM needs an explicit error message.
Remove the cxl_setup_fw_upload() error prints for what are rare /
hardware-independent failures.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of:
5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Fri, 29 Sep 2023 19:44:20 +0000 (12:44 -0700)]
cxl/pci: Cleanup 'sanitize' to always poll
[ Upstream commit
e30a106558e7d1e06d1fcfd12466dc646673d03d ]
In preparation for fixing the init/teardown of the 'sanitize' workqueue
and sysfs notification mechanism, arrange for cxl_mbox_sanitize_work()
to be the single location where the sysfs attribute is notified. With
that change there is no distinction between polled mode and interrupt
mode. All the interrupt does is accelerate the polling interval.
The change to check for "mds->security.sanitize_node" under the lock is
there to ensure that the interrupt, the work routine and the
setup/teardown code can all have a consistent view of the registered
notifier and the workqueue state. I.e. the expectation is that the
interrupt is live past the point that the sanitize sysfs attribute is
published, and it may race teardown, so it must be consulted under a
lock. Given that new locking requirement, cxl_pci_mbox_irq() is moved
from hard to thread irq context.
Lastly, some opportunistic replacements of
"queue_delayed_work(system_wq, ...)", which is just open coded
schedule_delayed_work(), are included.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of:
5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Fri, 29 Sep 2023 21:44:46 +0000 (14:44 -0700)]
cxl/pci: Remove unnecessary device reference management in sanitize work
[ Upstream commit
76fe8713dd0a1331d84d767e8e5d3f365d959e8a ]
Given that any particular put_device() could be the final put of the
device, the fact that there are usages of cxlds->dev after
put_device(cxlds->dev) is a red flag. Drop the reference counting since
the device is pinned by being registered and will not be unregistered
without triggering the driver + workqueue to shutdown.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of:
5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Doug Berger [Wed, 30 Aug 2023 22:47:47 +0000 (15:47 -0700)]
rtc: brcmstb-waketimer: support level alarm_irq
[ Upstream commit
e005a9b35b464be5b2e0194f717e90e7e496785d ]
Some devices (e.g. BCM72112) use an alarm_irq interrupt that is
connected to a level interrupt controller rather than an edge
interrupt controller. In this case, the interrupt cannot be left
enabled by the irq handler while preserving the hardware wake-up
signal on wake capable devices or an interrupt storm will occur.
The alarm_expired flag is introduced to allow the disabling of
the interrupt when an alarm expires and to support balancing the
calls to disable_irq() and enable_irq() in accordance with the
existing design.
Fixes:
24304a87158a ("rtc: brcmstb-waketimer: allow use as non-wake alarm")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230830224747.1663044-1-opendmb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinghao Liu [Thu, 21 Sep 2023 08:24:10 +0000 (16:24 +0800)]
i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs
[ Upstream commit
cab63f64887616e3c4e31cfd8103320be6ebc8d3 ]
put_device() needs to be called on failure of device_register()
to give up the reference initialized in it to avoid refcount leak.
Fixes:
3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20230921082410.25548-1-dinghao.liu@zju.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Thu, 27 Jul 2023 15:01:17 +0000 (16:01 +0100)]
rtla: Fix uninitialized variable found
[ Upstream commit
696444a544ecd6d62c1edc89516b376cefb28929 ]
Variable found is not being initialized, in the case where the desired
mount is not found the variable contains garbage. Fix this by initializing
it to zero.
Link: https://lore.kernel.org/all/20230727150117.627730-1-colin.i.king@gmail.com/
Fixes:
a957cbc02531 ("rtla: Add -C cgroup support")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangyu Hua [Fri, 27 Oct 2023 03:03:02 +0000 (11:03 +0800)]
9p/net: fix possible memory leak in p9_check_errors()
[ Upstream commit
ce07087964208eee2ca2f9ee4a98f8b5d9027fe6 ]
When p9pdu_readf() is called with "s?d" attribute, it allocates a pointer
that will store a string. But when p9pdu_readf() fails while handling "d"
then this pointer will not be freed in p9_check_errors().
Fixes:
51a87c552dfd ("9p: rework client code to use new protocol support functions")
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Message-ID: <
20231027030302.11927-1-hbh25y@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Tue, 26 Sep 2023 20:59:47 +0000 (13:59 -0700)]
perf vendor events intel: Add broadwellde two metrics
[ Upstream commit
19a214bffdf7abb8d472895bb944d9c269ab1699 ]
Add tma_info_system_socket_clks and uncore_freq metrics that require a
broadwellx style uncore event for UNC_CLOCK.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/112
Fixes:
7d124303d620 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926205948.1399594-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Tue, 26 Sep 2023 03:10:34 +0000 (20:10 -0700)]
perf vendor events intel: Fix broadwellde tma_info_system_dram_bw_use metric
[ Upstream commit
3779416eed25a843364b940decee452620a1de4b ]
Broadwell-de has a consumer core and server uncore. The uncore_arb PMU
isn't present and the broadwellx style cbox PMU should be used
instead. Fix the tma_info_system_dram_bw_use metric to use the server
metric rather than client.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/111
Fixes:
7d124303d620 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926031034.1201145-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Tue, 24 Oct 2023 22:23:08 +0000 (15:23 -0700)]
perf hist: Add missing puts to hist__account_cycles
[ Upstream commit
c1149037f65bcf0334886180ebe3d5efcf214912 ]
Caught using reference count checking on perf top with
"--call-graph=lbr". After this no memory leaks were detected.
Fixes:
57849998e2cd ("perf report: Add processing for cycle histograms")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Tue, 24 Oct 2023 22:23:06 +0000 (15:23 -0700)]
libperf rc_check: Make implicit enabling work for GCC
[ Upstream commit
75265320d290c5f5891f16967b94883676c46705 ]
Make the implicit REFCOUNT_CHECKING robust to when building with GCC.
Fixes:
9be6ab181b7b ("libperf rc_check: Enable implicitly with sanitizers")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Tue, 24 Oct 2023 22:23:05 +0000 (15:23 -0700)]
perf machine: Avoid out of bounds LBR memory read
[ Upstream commit
ab8ce150781d326c6bfbe1e09f175ffde1186f80 ]
Running perf top with address sanitizer and "--call-graph=lbr" fails
due to reading sample 0 when no samples exist. Add a guard to prevent
this.
Fixes:
e2b23483eb1d ("perf machine: Factor out lbr_callchain_add_lbr_ip()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Gupta [Mon, 23 Oct 2023 07:26:12 +0000 (12:56 +0530)]
powerpc/vmcore: Add MMU information to vmcoreinfo
[ Upstream commit
36e826b568e412f61d68fedc02a67b4d8b7583cc ]
Since below commit, address mapping for vmemmap has changed for Radix
MMU, where address mapping is stored in kernel page table itself,
instead of earlier used 'vmemmap_list'.
commit
368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use
a different vmemmap handling function")
Hence with upstream kernel, in case of Radix MMU, makedumpfile fails
to do address translation for vmemmap addresses, as it depended on
vmemmap_list, which can now be empty.
While fixing the address translation in makedumpfile, it was identified
that currently makedumpfile cannot distinguish between Hash MMU and
Radix MMU, unless VMLINUX is passed with -x flag to makedumpfile. And
hence fails to assign offsets and shifts correctly (such as in L4 to
PGDIR offset calculation in makedumpfile).
For getting the MMU, makedumpfile uses `cur_cpu_spec.mmu_features`.
Add `cur_cpu_spec` symbol and offset of `mmu_features` in the `cpu_spec`
struct, to VMCOREINFO, so that makedumpfile can assign the offsets
correctly, without needing a VMLINUX.
Also, even along with `cur_cpu_spec->mmu_features` makedumpfile has to
depend on the 'MMU_FTR_TYPE_RADIX' flag in mmu_features, implying kernel
developers need to be cautious of changes to 'MMU_FTR_*' defines.
A more stable approach was suggested in the below thread by contributors:
https://lore.kernel.org/linuxppc-dev/
20230920105706.853626-1-adityag@linux.ibm.com/
The suggestion was to add whether 'RADIX_MMU' is enabled in vmcoreinfo
This patch also implements the suggestion, by adding 'RADIX_MMU' in
vmcoreinfo, which makedumpfile can use to get whether the crashed system
had RADIX MMU (in which case 'NUMBER(RADIX_MMU)=1') or not (in which
case 'NUMBER(RADIX_MMU)=0')
Fixes:
368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023072612.50874-1-adityag@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Thu, 19 Oct 2023 10:29:23 +0000 (13:29 +0300)]
usb: host: xhci-plat: fix possible kernel oops while resuming
[ Upstream commit
a5f928db59519a15e82ecba4ae3e7cbf5a44715a ]
If this driver enables the xHC clocks while resuming from sleep, it calls
clk_prepare_enable() without checking for errors and blithely goes on to
read/write the xHC's registers -- which, with the xHC not being clocked,
at least on ARM32 usually causes an imprecise external abort exceptions
which cause kernel oops. Currently, the chips for which the driver does
the clock dance on suspend/resume seem to be the Broadcom STB SoCs, based
on ARM32 CPUs, as it seems...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes:
8bd954c56197 ("usb: host: xhci-plat: suspend and resume clocks")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Basavaraj Natikar [Thu, 19 Oct 2023 10:29:19 +0000 (13:29 +0300)]
xhci: Loosen RPM as default policy to cover for AMD xHC 1.1
[ Upstream commit
4baf1218150985ee3ab0a27220456a1f027ea0ac ]
The AMD USB host controller (1022:43f7) isn't going into PCI D3 by default
without anything connected. This is because the policy that was introduced
by commit
a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all
xHC 1.2 or later devices") only covered 1.2 or later.
The 1.1 specification also has the same requirement as the 1.2
specification for D3 support. So expand the runtime PM as default policy
to all AMD 1.1 devices as well.
Fixes:
a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices")
Link: https://composter.com.ua/documents/xHCI_Specification_for_USB.pdf
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Mon, 16 Oct 2023 14:31:10 +0000 (20:01 +0530)]
perf vendor events: Update PMC used in PM_RUN_INST_CMPL event for power10 platform
[ Upstream commit
3f8b6e5b11192dacb721d2d28ea4589917f5e822 ]
The CPI_STALL_RATIO metric group can be used to present the high
level CPI stall breakdown metrics in powerpc, which will show:
- DISPATCH_STALL_CPI ( Dispatch stall cycles per insn )
- ISSUE_STALL_CPI ( Issue stall cycles per insn )
- EXECUTION_STALL_CPI ( Execution stall cycles per insn )
- COMPLETION_STALL_CPI ( Completion stall cycles per insn )
Commit
cf26e043c2a9 ("perf vendor events power10: Add JSON
metric events to present CPI stall cycles in powerpc)" which added
the CPI_STALL_RATIO metric group, also modified
the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5,
to avoid multiplexing of events.
But that got revert in recent changes. Fix this issue by changing
back the PMC value used in PM_RUN_INST_CMPL to PMC5.
Result with the fix:
./perf stat --metric-no-group -M CPI_STALL_RATIO <workload>
Performance counter stats for 'workload':
68,745,426 PM_CMPL_STALL # 0.21 COMPLETION_STALL_CPI
7,692,827 PM_ISSUE_STALL # 0.02 ISSUE_STALL_CPI
322,638,223 PM_RUN_INST_CMPL # 0.05 DISPATCH_STALL_CPI
# 0.48 EXECUTION_STALL_CPI
16,858,553 PM_DISP_STALL_CYC
153,880,133 PM_EXEC_STALL
0.
089774592 seconds time elapsed
"--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled
in all group for more accuracy.
Fixes:
7d473f475b2a ("perf vendor events: Move JSON/events to appropriate files for power10 platform")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: maddy@linux.ibm.com
Link: https://lore.kernel.org/r/20231016143110.244255-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Yufen [Wed, 14 Dec 2022 07:46:23 +0000 (15:46 +0800)]
powerpc/pseries: fix potential memory leak in init_cpu_associativity()
[ Upstream commit
95f1a128cd728a7257d78e868f1f5a145fc43736 ]
If the vcpu_associativity alloc memory successfully but the
pcpu_associativity fails to alloc memory, the vcpu_associativity
memory leaks.
Fixes:
d62c8deeb6e6 ("powerpc/pseries: Provide vcpu dispatch statistics")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Andrzej Siewior [Thu, 9 Mar 2023 13:48:31 +0000 (14:48 +0100)]
powerpc/imc-pmu: Use the correct spinlock initializer.
[ Upstream commit
007240d59c11f87ac4f6cfc6a1d116630b6b634c ]
The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users
that desire to initialize a spinlock in a struct must use
__SPIN_LOCK_UNLOCKED().
Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc.
Fixes:
76d588dddc459 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haren Myneni [Thu, 19 Oct 2023 21:50:33 +0000 (14:50 -0700)]
powerpc/vas: Limit open window failure messages in log bufffer
[ Upstream commit
73b25505ce043b561028e5571d84dc82aa53c2b4 ]
The VAS open window call prints error message and returns -EBUSY
after the migration suspend event initiated and until the resume
event completed on the destination system. It can cause the log
buffer filled with these error messages if the user space issues
continuous open window calls. Similar case even for DLPAR CPU
remove event when no credits are available until the credits are
freed or with the other DLPAR CPU add event.
So changes in the patch to use pr_err_ratelimited() instead of
pr_err() to display open window failure and not-available credits
error messages.
Use pr_fmt() and make the corresponding changes to have the
consistencein prefix all pr_*() messages (vas-api.c).
Fixes:
37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Use "vas-api" as the prefix to match the file name.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231019215033.1335251-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Richter [Thu, 19 Oct 2023 08:26:42 +0000 (10:26 +0200)]
perf trace: Use the right bpf_probe_read(_str) variant for reading user data
[ Upstream commit
5069211e2f0b47e75119805e23ae6352d871e263 ]
Perf test case 111 Check open filename arg using perf trace + vfs_getname
fails on s390. This is caused by a failing function
bpf_probe_read() in file util/bpf_skel/augmented_raw_syscalls.bpf.c.
The root cause is the lookup by address. Function bpf_probe_read()
is used. This function works only for architectures
with ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
On s390 is not possible to determine from the address to which
address space the address belongs to (user or kernel space).
Replace bpf_probe_read() by bpf_probe_read_kernel()
and bpf_probe_read_str() by bpf_probe_read_user_str() to
explicity specify the address space the address refers to.
Output before:
# ./perf trace -eopen,openat -- touch /tmp/111
libbpf: prog 'sys_enter': BPF program load failed: Invalid argument
libbpf: prog 'sys_enter': -- BEGIN PROG LOAD LOG --
reg type unsupported for arg#0 function sys_enter#75
0: R1=ctx(off=0,imm=0) R10=fp0
; int sys_enter(struct syscall_enter_args *args)
0: (bf) r6 = r1 ; R1=ctx(off=0,imm=0) R6_w=ctx(off=0,imm=0)
; return bpf_get_current_pid_tgid();
1: (85) call bpf_get_current_pid_tgid#14 ; R0_w=scalar()
2: (63) *(u32 *)(r10 -8) = r0 ; R0_w=scalar() R10=fp0 fp-8=????mmmm
3: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
;
.....
lines deleted here
.....
23: (bf) r3 = r6 ; R3_w=ctx(off=0,imm=0) R6=ctx(off=0,imm=0)
24: (85) call bpf_probe_read#4
unknown func bpf_probe_read#4
processed 23 insns (limit 1000000) max_states_per_insn 0 \
total_states 2 peak_states 2 mark_read 2
-- END PROG LOAD LOG --
libbpf: prog 'sys_enter': failed to load: -22
libbpf: failed to load object 'augmented_raw_syscalls_bpf'
libbpf: failed to load BPF skeleton 'augmented_raw_syscalls_bpf': -22
....
Output after:
# ./perf test -Fv 111
111: Check open filename arg using perf trace + vfs_getname :
--- start ---
1.085 ( 0.011 ms): touch/320753 openat(dfd: CWD, filename: \
"/tmp/temporary_file.SWH85", \
flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
---- end ----
Check open filename arg using perf trace + vfs_getname: Ok
#
Test with the sleep command shows:
Output before:
# ./perf trace -e *sleep sleep 1.
234567890
0.000 (1234.681 ms): sleep/63114 clock_nanosleep(rqtp: \
{ .tv_sec: 0, .tv_nsec: 0 }, rmtp: 0x3ffe0979720) = 0
#
Output after:
# ./perf trace -e *sleep sleep 1.
234567890
0.000 (1234.686 ms): sleep/64277 clock_nanosleep(rqtp: \
{ .tv_sec: 1, .tv_nsec:
234567890 }, rmtp: 0x3fff3df9ea0) = 0
#
Fixes:
14e4b9f4289a ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Co-developed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20231019082642.3286650-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Thu, 24 Aug 2023 06:42:10 +0000 (16:42 +1000)]
powerpc: Hide empty pt_regs at base of the stack
[ Upstream commit
d45c4b48dafb5820e5cc267ff9a6d7784d13a43c ]
A thread started via eg. user_mode_thread() runs in the kernel to begin
with and then may later return to userspace. While it's running in the
kernel it has a pt_regs at the base of its kernel stack, but that
pt_regs is all zeroes.
If the thread oopses in that state, it leads to an ugly stack trace with
a big block of zero GPRs, as reported by Joel:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3
Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV
Call Trace:
[
c0000000036afb00] [
c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable)
[
c0000000036afb30] [
c00000000013c524] panic+0x178/0x424
[
c0000000036afbd0] [
c000000002005100] mount_root_generic+0x250/0x324
[
c0000000036afca0] [
c0000000020057d0] prepare_namespace+0x2d4/0x344
[
c0000000036afd20] [
c0000000020049c0] kernel_init_freeable+0x358/0x3ac
[
c0000000036afdf0] [
c0000000000111b0] kernel_init+0x30/0x1a0
[
c0000000036afe50] [
c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
NIP:
0000000000000000 LR:
0000000000000000 CTR:
0000000000000000
REGS:
c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129e3de-dirty)
MSR:
0000000000000000 <> CR:
00000000 XER:
00000000
CFAR:
0000000000000000 IRQMASK: 0
GPR00:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR04:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR08:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR16:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
NIP [
0000000000000000] 0x0
LR [
0000000000000000] 0x0
--- interrupt: 0
The all-zero pt_regs looks ugly and conveys no useful information, other
than its presence. So detect that case and just show the presence of the
frame by printing the interrupt marker, eg:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
Call Trace:
[
c000000003aabb00] [
c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable)
[
c000000003aabb30] [
c00000000014c624] panic+0x178/0x424
[
c000000003aabbd0] [
c0000000020050fc] mount_root_generic+0x250/0x324
[
c000000003aabca0] [
c0000000020057cc] prepare_namespace+0x2d4/0x344
[
c000000003aabd20] [
c0000000020049bc] kernel_init_freeable+0x358/0x3ac
[
c000000003aabdf0] [
c0000000000111b0] kernel_init+0x30/0x1a0
[
c000000003aabe50] [
c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
To avoid ever suppressing a valid pt_regs make sure the pt_regs has a
zero MSR and TRAP value, and is located at the very base of the stack.
Fixes:
6895dfc04741 ("powerpc: copy_thread fill in interrupt frame marker and back chain")
Reported-by: Joel Stanley <joel@jms.id.au>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230824064210.907266-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Gray [Wed, 11 Oct 2023 05:37:00 +0000 (16:37 +1100)]
powerpc/xive: Fix endian conversion size
[ Upstream commit
ff7a60ab1e065257a0e467c13b519f4debcd7fcf ]
Sparse reports a size mismatch in the endian swap. The Opal
implementation[1] passes the value as a __be64, and the receiving
variable out_qsize is a u64, so the use of be32_to_cpu() appears to be
an error.
[1]: https://github.com/open-power/skiboot/blob/
80e2b1dc73/hw/xive.c#L3854
Fixes:
88ec6b93c8e7 ("powerpc/xive: add OPAL extensions for the XIVE native exploitation support")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Mon, 25 Sep 2023 18:31:17 +0000 (20:31 +0200)]
powerpc/40x: Remove stale PTE_ATOMIC_UPDATES macro
[ Upstream commit
cc8ee288f484a2a59c01ccd4d8a417d6ed3466e3 ]
40x TLB handlers were reworked by commit
2c74e2586bb9 ("powerpc/40x:
Rework 40x PTE access and TLB miss") to not require PTE_ATOMIC_UPDATES
anymore.
Then commit
4e1df545e2fa ("powerpc/pgtable: Drop PTE_ATOMIC_UPDATES")
removed all code related to PTE_ATOMIC_UPDATES.
Remove left over PTE_ATOMIC_UPDATES macro.
Fixes:
2c74e2586bb9 ("powerpc/40x: Rework 40x PTE access and TLB miss")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/f061db5857fcd748f84a6707aad01754686ce97e.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namhyung Kim [Tue, 10 Oct 2023 23:42:47 +0000 (16:42 -0700)]
perf tools: Do not ignore the default vmlinux.h
[ Upstream commit
1f36b190ad2dea68e3a7e84b7b2f24ce8c4063ea ]
The recent change made it possible to generate vmlinux.h from BTF and
to ignore the file. But we also have a minimal vmlinux.h that will be
used by default. It should not be ignored by GIT.
Fixes:
b7a2d774c9c5 ("perf build: Add ability to build with a generated vmlinux.h")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202310110451.rvdUZJEY-lkp@intel.com/
Cc: oe-kbuild-all@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Sat, 7 Oct 2023 17:04:45 +0000 (02:04 +0900)]
modpost: fix ishtp MODULE_DEVICE_TABLE built on big-endian host
[ Upstream commit
ac96a15a0f0c8812a3aaa587b871cd5527f6d736 ]
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{
6A19CC4B-D760-4DE3-B14D-
F25EBD0FBCD9}");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{
BD0FBCD9-F25E-B14D-4DE3-
D7606A19CC4B}");
This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.
The guid field must not be reversed because guid_t is an array of __u8.
Fixes:
fa443bc3c1e4 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Sat, 7 Oct 2023 17:04:44 +0000 (02:04 +0900)]
modpost: fix tee MODULE_DEVICE_TABLE built on big-endian host
[ Upstream commit
7f54e00e5842663c2cea501bbbdfa572c94348a3 ]
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:
ab7a617c-b8e7-4d8f-8301-
d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:
646b0361-9bd0-0183-8f4d-
e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes:
0fc1db9d1059 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harald Freudenberger [Tue, 12 Sep 2023 07:54:25 +0000 (09:54 +0200)]
s390/ap: re-init AP queues on config on
[ Upstream commit
32d1d9204f8db3360be55e65bd182a1a68f93308 ]
On a state toggle from config off to config on and on the
state toggle from checkstop to not checkstop the queue's
internal states was set but the state machine was not
nudged. This did not care as on the first enqueue of a
request the state machine kick ran.
However, within an Secure Execution guest a queue is
only chosen by the scheduler when it has been bound.
But to bind a queue, it needs to run through the initial
states (reset, enable interrupts, ...). So this is like
a chicken-and-egg problem and the result was in fact
that a queue was unusable after a config off/on toggle.
With some slight rework of the handling of these states
now the new function _ap_queue_init_state() is called
which is the core of the ap_queue_init_state() function
but without locking handling. This has the benefit that
it can be called on all the places where a (re-)init
of the AP queue's state machine is needed.
Fixes:
2d72eaf036d2 ("s390/ap: implement SE AP bind, unbind and associate")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Mon, 9 Oct 2023 18:39:10 +0000 (11:39 -0700)]
perf mem-events: Avoid uninitialized read
[ Upstream commit
85f73c377b2ac9988a204b119aebb33ca5c60083 ]
pmu should be initialized to NULL before perf_pmus__scan loop. Fix and
shrink the scope of pmu at the same time. Issue detected by clang-tidy.
Fixes:
5752c20f3787 ("perf mem: Scan all PMUs instead of just core ones")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Thu, 28 Sep 2023 00:44:31 +0000 (17:44 -0700)]
perf parse-events: Fix for term values that are raw events
[ Upstream commit
b20576fd7fe39554b212095c3c0d7a3dff512515 ]
Raw events can be strings like 'r0xead' but the 0x is optional so they
can also be 'read'. On IcelakeX uncore_imc_free_running has an event
called 'read' which may be programmed as:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
```
However, the PE_RAW type isn't allowed on the right of a term, even
though in this case we just want to interpret it as a string. This
leads to the following error on IcelakeX:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Fix this by allowing raw types on the right of terms and treat them as
strings, just as is already done for PE_LEGACY_CACHE. Make this
consistent by just entirely removing name_or_legacy and always using
name_or_raw that covers all three cases.
Fixes:
6fd1e5191591 ("perf parse-events: Support PMUs for legacy cache events")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230928004431.1926969-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Thu, 5 Oct 2023 13:46:26 +0000 (10:46 -0300)]
perf build: Add missing comment about NO_LIBTRACEEVENT=1
[ Upstream commit
c1783ddfb62420c44cdf4672dad2046f056c624b ]
By default perf will fail the build if the development files for
libtraceevent are not available.
To build perf without libtraceevent support, disabling several features
such as 'perf trace', one needs to add NO_LIBTRACEVENT=1 to the make
command line.
Add the missing comments about that to the tools/perf/Makefile.perf
file, just like all the other such command line toggles.
Fixes:
378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZR6+MhXtLnv6ow6E@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 3 Aug 2023 13:05:21 +0000 (21:05 +0800)]
interconnect: fix error handling in qnoc_probe()
[ Upstream commit
273f74a2e7d15a5c216a4a26b84b1563c7092c9d ]
Add missing clk_disable_unprepare() and clk_bulk_disable_unprepare()
in the error path in qnoc_probe(). And when qcom_icc_qos_set() fails,
it needs remove nodes and disable clks.
Fixes:
2e2113c8a64f ("interconnect: qcom: rpm: Handle interface clocks")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230803130521.959487-1-yangyingliang@huawei.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Fri, 22 Sep 2023 12:33:13 +0000 (14:33 +0200)]
powerpc: Only define __parse_fpscr() when required
[ Upstream commit
c7e0d9bb9154c6e6b2ac8746faba27b53393f25e ]
Clang 17 reports:
arch/powerpc/kernel/traps.c:1167:19: error: unused function '__parse_fpscr' [-Werror,-Wunused-function]
__parse_fpscr() is called from two sites. First call is guarded
by #ifdef CONFIG_PPC_FPU_REGS
Second call is guarded by CONFIG_MATH_EMULATION which selects
CONFIG_PPC_FPU_REGS.
So only define __parse_fpscr() when CONFIG_PPC_FPU_REGS is defined.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202309210327.WkqSd5Bq-lkp@intel.com/
Fixes:
b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5de2998c57f3983563b27b39228ea9a7229d4110.1695385984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Wed, 20 Sep 2023 15:49:27 +0000 (18:49 +0300)]
interconnect: qcom: osm-l3: Replace custom implementation of COUNT_ARGS()
[ Upstream commit
577a3c5af1fe87b65931ea94d5515266da301f56 ]
Replace custom and non-portable implementation of COUNT_ARGS().
Fixes:
5bc9900addaf ("interconnect: qcom: Add OSM L3 interconnect provider support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230920154927.2090732-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:54 +0000 (01:20 +0200)]
interconnect: qcom: sm8350: Set ACV enable_mask
[ Upstream commit
df1b8356a80ab47a7623e08facf36fe434ea9722 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
d26a56674497 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-11-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:53 +0000 (01:20 +0200)]
interconnect: qcom: sm8250: Set ACV enable_mask
[ Upstream commit
9434c6896123141ac1f8f18b3d1751abbecdd03f ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
6df5b349491e ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-10-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:52 +0000 (01:20 +0200)]
interconnect: qcom: sm8150: Set ACV enable_mask
[ Upstream commit
7ed42176406e5a2c9a5767d0d75690c7d1588027 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
a09b817c8bad ("interconnect: qcom: Add SM8150 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-9-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:51 +0000 (01:20 +0200)]
interconnect: qcom: sm6350: Set ACV enable_mask
[ Upstream commit
fe7a3abf4111992af3de51d22383a8e8a0affe1e ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
6a6eff73a954 ("interconnect: qcom: Add SM6350 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-8-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:50 +0000 (01:20 +0200)]
interconnect: qcom: sdm845: Set ACV enable_mask
[ Upstream commit
f8fe97a9fd2098de0570387029065eef657d50ee ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-7-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:49 +0000 (01:20 +0200)]
interconnect: qcom: sdm670: Set ACV enable_mask
[ Upstream commit
7b85ea8b9300be5c2818e1f61a274ff2c4c063ee ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
7e438e18874e ("interconnect: qcom: add sdm670 interconnects")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-6-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:48 +0000 (01:20 +0200)]
interconnect: qcom: sc8280xp: Set ACV enable_mask
[ Upstream commit
688ffb3dcf85fc4b7ea82af842493013747a9e2c ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
f29dabda7917 ("interconnect: qcom: Add SC8280XP interconnect provider")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-5-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:47 +0000 (01:20 +0200)]
interconnect: qcom: sc8180x: Set ACV enable_mask
[ Upstream commit
0fcaaed3ff4b99e5b688b799f48989f1e4bb8a8b ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
9c8c6bac1ae8 ("interconnect: qcom: Add SC8180x providers")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-4-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:46 +0000 (01:20 +0200)]
interconnect: qcom: sc7280: Set ACV enable_mask
[ Upstream commit
437b8e7fcd5df792cb8b8095e9f6eccefec6c099 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
46bdcac533cc ("interconnect: qcom: Add SC7280 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-3-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:45 +0000 (01:20 +0200)]
interconnect: qcom: sc7180: Set ACV enable_mask
[ Upstream commit
1ad83c4792722fe134c1352591420702ff7b9091 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
2d1f95ab9feb ("interconnect: qcom: Add SC7180 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-2-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 23:20:44 +0000 (01:20 +0200)]
interconnect: qcom: qdu1000: Set ACV enable_mask
[ Upstream commit
8517824f0e94d52ab82742106314f0b8875e03c4 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes:
1f51339f7dd0 ("interconnect: qcom: Add QDU1000/QRU1000 interconnect driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-1-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Sat, 7 Oct 2023 07:45:52 +0000 (15:45 +0800)]
f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()
[ Upstream commit
8b07c1fb0f1ad139373c8253f2fad8bc43fab07d ]
Otherwise, it may print random physical block address in tracepoint
of f2fs_map_blocks() as below:
f2fs_map_blocks: dev = (253,16), ino = 2297, file offset = 0, start blkaddr = 0xa356c421, len = 0x0, flags = 0
Fixes:
c4020b2da4c9 ("f2fs: support F2FS_IOC_PRECACHE_EXTENTS")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 7 Oct 2023 11:13:09 +0000 (13:13 +0200)]
dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()
[ Upstream commit
83c761f568733277ce1f7eb9dc9e890649c29a8c ]
If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().
Remove this erroneous BUG_ON().
It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')
Fixes:
a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c8fc5563c9593c914fde41f0f7d1489a21b45a9a.1696676782.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonas Blixt [Thu, 15 Jun 2023 09:28:10 +0000 (11:28 +0200)]
USB: usbip: fix stub_dev hub disconnect
[ Upstream commit
97475763484245916735a1aa9a3310a01d46b008 ]
If a hub is disconnected that has device(s) that's attached to the usbip layer
the disconnect function might fail because it tries to release the port
on an already disconnected hub.
Fixes:
6080cd0e9239 ("staging: usbip: claim ports used by shared devices")
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230615092810.1215490-1-jonas.blixt@actia.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matti Vaittinen [Tue, 3 Oct 2023 09:57:47 +0000 (12:57 +0300)]
tools: iio: iio_generic_buffer ensure alignment
[ Upstream commit
2d3dff577dd0ea8fe9637a13822f7603c4a881c8 ]
The iio_generic_buffer can return garbage values when the total size of
scan data is not a multiple of the largest element in the scan. This can be
demonstrated by reading a scan, consisting, for example of one 4-byte and
one 2-byte element, where the 4-byte element is first in the buffer.
The IIO generic buffer code does not take into account the last two
padding bytes that are needed to ensure that the 4-byte data for next
scan is correctly aligned.
Add the padding bytes required to align the next sample with the scan size.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes:
e58537ccce73 ("staging: iio: update example application.")
Link: https://lore.kernel.org/r/ZRvlm4ktNLu+qmlf@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Tipton [Fri, 22 Sep 2023 13:45:12 +0000 (06:45 -0700)]
debugfs: Fix __rcu type comparison warning
[ Upstream commit
7360a48bd0f5e62b2d00c387d5d3f2821eb290ce ]
Sparse reports the following:
fs/debugfs/file.c:942:9: sparse: sparse: incompatible types in comparison expression (different address spaces):
fs/debugfs/file.c:942:9: sparse: char [noderef] __rcu *
fs/debugfs/file.c:942:9: sparse: char *
rcu_assign_pointer() expects that it's assigning to pointers annotated
with __rcu. We can't annotate the generic struct file::private_data, so
cast it instead.
Fixes:
86b5488121db ("debugfs: Add write support to debugfs_create_str()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202309091933.BRWlSnCq-lkp@intel.com/
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20230922134512.5126-1-quic_mdtipton@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jinjie Ruan [Wed, 23 Aug 2023 03:50:20 +0000 (11:50 +0800)]
misc: st_core: Do not call kfree_skb() under spin_lock_irqsave()
[ Upstream commit
4d08c3d12b61022501989f9f071514d2d6f77c47 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.
Fixes:
53618cc1e51e ("Staging: sources for ST core")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230823035020.1281892-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Tue, 3 Oct 2023 09:21:13 +0000 (14:51 +0530)]
tools/perf: Update call stack check in builtin-lock.c
[ Upstream commit
d7c9ae8d5d1be0c4156d1e20e4369a77b711a4cc ]
The perf test named "kernel lock contention analysis test"
fails in powerpc system with below error:
[command]# ./perf test 81 -vv
81: kernel lock contention analysis test :
--- start ---
test child forked, pid 2140
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
[Skip] No BPF support
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
[Fail] Recorded result should have a lock from unix_stream:
test child finished with -1
---- end ----
kernel lock contention analysis test: FAILED!
The test is failing because we get an address entry with 0 in
perf lock samples for powerpc, and code for lock contention
option "--callstack-filter" will not check further entries after
address 0.
Below are some of the samples from test generated perf.data file, which
have 0 address in the 2nd entry of callstack:
--------
sched-messaging 3409 [001] 7152.904029: lock:contention_begin: 0xc00000c80904ef00 (flags=SPIN)
c0000000001e926c __traceiter_contention_begin+0x6c ([kernel.kallsyms])
0 [unknown] ([unknown])
c000000000f8a178 native_queued_spin_lock_slowpath+0x1f8 ([kernel.kallsyms])
c000000000f89f44 _raw_spin_lock_irqsave+0x84 ([kernel.kallsyms])
c0000000001d9fd0 prepare_to_wait+0x50 ([kernel.kallsyms])
c000000000c80f50 sock_alloc_send_pskb+0x1b0 ([kernel.kallsyms])
c000000000e82298 unix_stream_sendmsg+0x2b8 ([kernel.kallsyms])
c000000000c78980 sock_sendmsg+0x80 ([kernel.kallsyms])
sched-messaging 3408 [005] 7152.904036: lock:contention_begin: 0xc00000c80904ef00 (flags=SPIN)
c0000000001e926c __traceiter_contention_begin+0x6c ([kernel.kallsyms])
0 [unknown] ([unknown])
c000000000f8a178 native_queued_spin_lock_slowpath+0x1f8 ([kernel.kallsyms])
c000000000f89f44 _raw_spin_lock_irqsave+0x84 ([kernel.kallsyms])
c0000000001d9fd0 prepare_to_wait+0x50 ([kernel.kallsyms])
c000000000c80f50 sock_alloc_send_pskb+0x1b0 ([kernel.kallsyms])
c000000000e82298 unix_stream_sendmsg+0x2b8 ([kernel.kallsyms])
c000000000c78980 sock_sendmsg+0x80 ([kernel.kallsyms])
--------
Based on commit
20002ded4d93 ("perf_counter: powerpc: Add callchain support"),
incase of powerpc, the callchain saved by kernel always includes first
three entries as the NIP (next instruction pointer), LR (link register), and
the contents of LR save area in the second stack frame. In certain scenarios
its possible to have invalid kernel instruction addresses in either of LR or the
second stack frame's LR. In that case, kernel will store the address as zer0.
Hence, its possible to have 2nd or 3rd callstack entry as 0.
As per the current code in match_callstack_filter function, we skip the callstack
check incase we get 0 address. And hence the test case is failing in powerpc.
Fix this issue by updating the check in match_callstack_filter function,
to not skip callstack check if the 2nd or 3rd entry have 0 address
for powerpc.
Result in powerpc after patch changes:
[command]# ./perf test 81 -vv
81: kernel lock contention analysis test :
--- start ---
test child forked, pid 4570
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
[Skip] No BPF support
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
[Skip] Could not find 'tasklist_lock'
Testing perf lock contention --callstack-filter (w/ unix_stream)
Testing perf lock contention --callstack-filter with task aggregation
Testing perf lock contention CSV output
[Skip] No BPF support
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Fixes:
ebab291641be ("perf lock contention: Support filters for different aggregation")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Link: https://lore.kernel.org/r/20231003092113.252380-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 15 Sep 2023 12:59:59 +0000 (15:59 +0300)]
dmaengine: ti: edma: handle irq_of_parse_and_map() errors
[ Upstream commit
14f6d317913f634920a640e9047aa2e66f5bdcb7 ]
Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error. So this check for valid IRQs should only
accept values > 0.
Fixes:
2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michał Mirosław [Thu, 28 Sep 2023 21:06:03 +0000 (23:06 +0200)]
usb: chipidea: Simplify Tegra DMA alignment code
[ Upstream commit
2ae61a2562c0d1720545b0845829a65fb6a9c2c6 ]
The USB host on Tegra3 works with 32-bit alignment. Previous code tried
to align the buffer, but it did align the wrapper struct instead, so
the buffer was at a constant offset of 8 bytes (two pointers) from
expected alignment. Since kmalloc() guarantees at least 8-byte
alignment already, the alignment-extending is removed.
Fixes:
fc53d5279094 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/a0d917d492b1f91ee0019e68b8e8bca9c585393f.1695934946.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michał Mirosław [Thu, 28 Sep 2023 21:06:03 +0000 (23:06 +0200)]
usb: chipidea: Fix DMA overwrite for Tegra
[ Upstream commit
7ab8716713c931ac79988f2592e1cf8b2e4fec1b ]
Tegra USB controllers seem to issue DMA in full 32-bit words only and thus
may overwrite unevenly-sized buffers. One such occurrence is detected by
SLUB when receiving a reply to a 1-byte buffer (below). Fix this by
allocating a bounce buffer also for buffers with sizes not a multiple of 4.
=============================================================================
BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten
-----------------------------------------------------------------------------
0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc
Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41
__kmem_cache_alloc_node+0x12f/0x1e4
__kmalloc+0x33/0x8c
usb_get_status+0x2b/0xac
hub_probe+0x5e9/0xcec
usb_probe_interface+0xbf/0x21c
really_probe+0xa5/0x2c4
__driver_probe_device+0x75/0x174
driver_probe_device+0x31/0x94
__device_attach_driver+0x65/0xc0
bus_for_each_drv+0x4b/0x74
__device_attach+0x69/0x120
bus_probe_device+0x65/0x6c
device_add+0x48b/0x5f8
usb_set_configuration+0x37b/0x6b4
usb_generic_driver_probe+0x37/0x68
usb_probe_device+0x35/0xb4
Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0)
Object 0x8555cd00 @offset=3328 fp=0x00000000
Redzone
8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone
8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone
8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone
8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object
8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................
Object
8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object
8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object
8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone
8555cd40: cc cc cc cc ....
Padding
8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: usb_hub_wq hub_event
[<
8010ca28>] (unwind_backtrace) from [<
801090a5>] (show_stack+0x11/0x14)
[<
801090a5>] (show_stack) from [<
805da2fb>] (dump_stack_lvl+0x4d/0x7c)
[<
805da2fb>] (dump_stack_lvl) from [<
8026464f>] (check_bytes_and_report+0xb3/0xe4)
[<
8026464f>] (check_bytes_and_report) from [<
802648e1>] (check_object+0x261/0x290)
[<
802648e1>] (check_object) from [<
802671b1>] (free_to_partial_list+0x105/0x3f8)
[<
802671b1>] (free_to_partial_list) from [<
80268613>] (__kmem_cache_free+0x103/0x128)
[<
80268613>] (__kmem_cache_free) from [<
80425a67>] (usb_get_status+0x73/0xac)
[<
80425a67>] (usb_get_status) from [<
80421b31>] (hub_probe+0x5e9/0xcec)
[<
80421b31>] (hub_probe) from [<
80428bbb>] (usb_probe_interface+0xbf/0x21c)
[<
80428bbb>] (usb_probe_interface) from [<
803ee13d>] (really_probe+0xa5/0x2c4)
[<
803ee13d>] (really_probe) from [<
803ee3d1>] (__driver_probe_device+0x75/0x174)
[<
803ee3d1>] (__driver_probe_device) from [<
803ee501>] (driver_probe_device+0x31/0x94)
usb 1-1: device descriptor read/8, error -71
Fixes:
fc53d5279094 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/ef8466b834c1726f5404c95c3e192e90460146f8.1695934946.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Tue, 26 Sep 2023 02:44:04 +0000 (10:44 +0800)]
usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency
[ Upstream commit
ef307bc6ef04e8c1ea843231db58e3afaafa9fa6 ]
In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without
holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue():
spin_lock_irqsave(&hsotg->lock, flags);
...
if (!urb->hcpriv) {
dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
goto out;
}
rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv
...
out:
spin_unlock_irqrestore(&hsotg->lock, flags);
When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are
concurrently executed, the NULL check of "urb->hcpriv" can be executed
before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used
in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL
pointer dereference.
This possible bug is found by an experimental static analysis tool
developed by myself. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations. The above possible
bug is reported, when my tool analyzes the source code of Linux 6.5.
To fix this possible bug, "urb->hcpriv = NULL" should be executed with
holding the lock "hsotg->lock". After using this patch, my tool never
reports the possible bug, with the kernelconfiguration allyesconfig for
x86_64. Because I have no associated hardware, I cannot test the patch
in runtime testing, and just verify it according to the code logic.
Fixes:
33ad261aa62b ("usb: dwc2: host: spinlock urb_enqueue")
Signed-off-by: Jia-Ju Bai <baijiaju@buaa.edu.cn>
Link: https://lore.kernel.org/r/20230926024404.832096-1-baijiaju@buaa.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fenghua Yu [Sun, 24 Sep 2023 16:22:32 +0000 (09:22 -0700)]
dmaengine: idxd: Register dsa_bus_type before registering idxd sub-drivers
[ Upstream commit
88928addeec577386e8c83b48b5bc24d28ba97fd ]
idxd sub-drivers belong to bus dsa_bus_type. Thus, dsa_bus_type must be
registered in dsa bus init before idxd drivers can be registered.
But the order is wrong when both idxd and idxd_bus are builtin drivers.
In this case, idxd driver is compiled and linked before idxd_bus driver.
Since the initcall order is determined by the link order, idxd sub-drivers
are registered in idxd initcall before dsa_bus_type is registered
in idxd_bus initcall. idxd initcall fails:
[ 21.562803] calling idxd_init_module+0x0/0x110 @ 1
[ 21.570761] Driver 'idxd' was unable to register with bus_type 'dsa' because the bus was not initialized.
[ 21.586475] initcall idxd_init_module+0x0/0x110 returned -22 after 15717 usecs
[ 21.597178] calling dsa_bus_init+0x0/0x20 @ 1
To fix the issue, compile and link idxd_bus driver before idxd driver
to ensure the right registration order.
Fixes:
d9e5481fca74 ("dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone")
Reported-by: Michael Prinke <michael.prinke@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Tested-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20230924162232.1409454-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namhyung Kim [Fri, 22 Sep 2023 23:44:44 +0000 (16:44 -0700)]
perf record: Fix BTF type checks in the off-cpu profiling
[ Upstream commit
0e501a65d35bf72414379fed0e31a0b6b81ab57d ]
The BTF func proto for a tracepoint has one more argument than the
actual tracepoint function since it has a context argument at the
begining. So it should compare to 5 when the tracepoint has 4
arguments.
typedef void (*btf_trace_sched_switch)(void *, bool, struct task_struct *, struct task_struct *, unsigned int);
Also, recent change in the perf tool would use a hand-written minimal
vmlinux.h to generate BTF in the skeleton. So it won't have the info
of the tracepoint. Anyway it should use the kernel's vmlinux BTF to
check the type in the kernel.
Fixes:
b36888f71c85 ("perf record: Handle argument change in sched_switch")
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Song Liu <song@kernel.org>
Cc: Hao Luo <haoluo@google.com>
CC: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230922234444.3115821-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilkka Koskinen [Wed, 20 Sep 2023 06:18:39 +0000 (23:18 -0700)]
perf vendor events arm64: Fix for AmpereOne metrics
[ Upstream commit
59faeaf80d0239412056c4495cc49097e9cea4da ]
This patch addresses review comments that were given for
705ed549148f ("perf vendor events arm64: Add AmpereOne metrics")
but didn't make it to the original patch [1][2]
Changes include: A fix for backend_memory formula, use of standard metrics
when possible, using #slots, renaming metrics to avoid spaces in the names,
and cleanup.
[1] https://lore.kernel.org/linux-perf-users/e9bdacb-a231-36af-6a2e-
6918ee7effa@os.amperecomputing.com/
[2] https://lore.kernel.org/linux-perf-users/
20230826192352.3043220-1-ilkka@os.amperecomputing.com/
Fixes:
705ed549148f ("perf vendor events arm64: Add AmpereOne metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230920061839.2437413-1-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Biju Das [Mon, 18 Sep 2023 12:33:54 +0000 (13:33 +0100)]
pinctrl: renesas: rzg2l: Make reverse order of enable() for disable()
[ Upstream commit
dd462cf53e4dff0f4eba5e6650e31ceddec74c6f ]
We usually do reverse order of enable() for disable(). Currently, the
ordering of irq_chip_disable_parent() is not correct in
rzg2l_gpio_irq_disable(). Fix the incorrect order.
Fixes:
db2e5f21a48e ("pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230918123355.262115-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Yejian [Thu, 14 Sep 2023 07:26:44 +0000 (15:26 +0800)]
livepatch: Fix missing newline character in klp_resolve_symbols()
[ Upstream commit
67e18e132f0fd738f8c8cac3aa1420312073f795 ]
Without the newline character, the log may not be printed immediately
after the error occurs.
Fixes:
ca376a937486 ("livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230914072644.4098857-1-zhengyejian1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Thu, 14 Sep 2023 16:40:28 +0000 (09:40 -0700)]
perf parse-events: Fix tracepoint name memory leak
[ Upstream commit
ede72dca45b1893f3e9236b6ad6c4e790db232f6 ]
Fuzzing found that an invalid tracepoint name would create a memory
leak with an address sanitizer build:
```
$ perf stat -e '*:o/' true
event syntax error: '*:o/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
=================================================================
==59380==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 4 byte(s) in 2 object(s) allocated from:
#0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x55f2f41be73b in str util/parse-events.l:49
#2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338
#3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464
#4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822
#5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094
#6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279
#7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251
#8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351
#9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539
#10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654
#11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501
#12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322
#13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375
#14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419
#15 0x55f2f409412b in main tools/perf/perf.c:535
SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s).
```
Fix by adding the missing destructor.
Fixes:
865582c3f48e ("perf tools: Adds the tracepoint name parsing support")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: He Kuang <hekuang@huawei.com>
Link: https://lore.kernel.org/r/20230914164028.363220-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yi Yang [Thu, 31 Aug 2023 02:33:29 +0000 (10:33 +0800)]
tty: tty_jobctrl: fix pid memleak in disassociate_ctty()
[ Upstream commit
11e7f27b79757b6586645d87b95d5b78375ecdfc ]
There is a pid leakage:
------------------------------
unreferenced object 0xffff88810c181940 (size 224):
comm "sshd", pid 8191, jiffies
4294946950 (age 524.570s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
backtrace:
[<
ffffffff814774e6>] kmem_cache_alloc+0x5c6/0x9b0
[<
ffffffff81177342>] alloc_pid+0x72/0x570
[<
ffffffff81140ac4>] copy_process+0x1374/0x2470
[<
ffffffff81141d77>] kernel_clone+0xb7/0x900
[<
ffffffff81142645>] __se_sys_clone+0x85/0xb0
[<
ffffffff8114269b>] __x64_sys_clone+0x2b/0x30
[<
ffffffff83965a72>] do_syscall_64+0x32/0x80
[<
ffffffff83a00085>] entry_SYSCALL_64_after_hwframe+0x61/0xc6
It turns out that there is a race condition between disassociate_ctty() and
tty_signal_session_leader(), which caused this leakage.
The pid memleak is triggered by the following race:
task[sshd] task[bash]
----------------------- -----------------------
disassociate_ctty();
spin_lock_irq(¤t->sighand->siglock);
put_pid(current->signal->tty_old_pgrp);
current->signal->tty_old_pgrp = NULL;
tty = tty_kref_get(current->signal->tty);
spin_unlock_irq(¤t->sighand->siglock);
tty_vhangup();
tty_lock(tty);
...
tty_signal_session_leader();
spin_lock_irq(&p->sighand->siglock);
...
if (tty->ctrl.pgrp) //tty->ctrl.pgrp is not NULL
p->signal->tty_old_pgrp = get_pid(tty->ctrl.pgrp); //An extra get
spin_unlock_irq(&p->sighand->siglock);
...
tty_unlock(tty);
if (tty) {
tty_lock(tty);
...
put_pid(tty->ctrl.pgrp);
tty->ctrl.pgrp = NULL; //It's too late
...
tty_unlock(tty);
}
The issue is believed to be introduced by commit
c8bcd9c5be24 ("tty:
Fix ->session locking") who moves the unlock of siglock in
disassociate_ctty() above "if (tty)", making a small window allowing
tty_signal_session_leader() to kick in. It can be easily reproduced by
adding a delay before "if (tty)" and at the entrance of
tty_signal_session_leader().
To fix this issue, we move "put_pid(current->signal->tty_old_pgrp)" after
"tty->ctrl.pgrp = NULL".
Fixes:
c8bcd9c5be24 ("tty: Fix ->session locking")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20230831023329.165737-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Tue, 5 Sep 2023 04:57:53 +0000 (12:57 +0800)]
f2fs: fix to drop meta_inode's page cache in f2fs_put_super()
[ Upstream commit
a4639380bbe66172df329f8b54aa7d2e943f0f64 ]
syzbot reports a kernel bug as below:
F2FS-fs (loop1): detect filesystem reference count leak during umount, type: 10, count: 1
kernel BUG at fs/f2fs/super.c:1639!
CPU: 0 PID: 15451 Comm: syz-executor.1 Not tainted 6.5.0-syzkaller-09338-ge0152e7481c6 #0
RIP: 0010:f2fs_put_super+0xce1/0xed0 fs/f2fs/super.c:1639
Call Trace:
generic_shutdown_super+0x161/0x3c0 fs/super.c:693
kill_block_super+0x3b/0x70 fs/super.c:1646
kill_f2fs_super+0x2b7/0x3d0 fs/f2fs/super.c:4879
deactivate_locked_super+0x9a/0x170 fs/super.c:481
deactivate_super+0xde/0x100 fs/super.c:514
cleanup_mnt+0x222/0x3d0 fs/namespace.c:1254
task_work_run+0x14d/0x240 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x210/0x240 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x60 kernel/entry/common.c:296
do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
In f2fs_put_super(), it tries to do sanity check on dirty and IO
reference count of f2fs, once there is any reference count leak,
it will trigger panic.
The root case is, during f2fs_put_super(), if there is any IO error
in f2fs_wait_on_all_pages(), we missed to truncate meta_inode's page
cache later, result in panic, fix this case.
Fixes:
20872584b8c0 ("f2fs: fix to drop all dirty meta/node pages during umount()")
Reported-by: syzbot+ebd7072191e2eddd7d6e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/
000000000000a14f020604a62a98@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Mon, 28 Aug 2023 14:04:17 +0000 (22:04 +0800)]
f2fs: compress: fix to avoid redundant compress extension
[ Upstream commit
7e1b150fece033703a824df1bbc03df091ea53cc ]
With below script, redundant compress extension will be parsed and added
by parse_options(), because parse_options() doesn't check whether the
extension is existed or not, fix it.
1. mount -t f2fs -o compress_extension=so /dev/vdb /mnt/f2fs
2. mount -t f2fs -o remount,compress_extension=so /mnt/f2fs
3. mount|grep f2fs
/dev/vdb on /mnt/f2fs type f2fs (...,compress_extension=so,compress_extension=so,...)
Fixes:
4c8ff7095bef ("f2fs: support data compression")
Fixes:
151b1982be5d ("f2fs: compress: add nocompress extensions support")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Mon, 28 Aug 2023 14:04:15 +0000 (22:04 +0800)]
f2fs: compress: fix to avoid use-after-free on dic
[ Upstream commit
b0327c84e91a0f4f0abced8cb83ec86a7083f086 ]
Call trace:
__memcpy+0x128/0x250
f2fs_read_multi_pages+0x940/0xf7c
f2fs_mpage_readpages+0x5a8/0x624
f2fs_readahead+0x5c/0x110
page_cache_ra_unbounded+0x1b8/0x590
do_sync_mmap_readahead+0x1dc/0x2e4
filemap_fault+0x254/0xa8c
f2fs_filemap_fault+0x2c/0x104
__do_fault+0x7c/0x238
do_handle_mm_fault+0x11bc/0x2d14
do_mem_abort+0x3a8/0x1004
el0_da+0x3c/0xa0
el0t_64_sync_handler+0xc4/0xec
el0t_64_sync+0x1b4/0x1b8
In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if
we hit cached page in compress_inode's cache, dic may be released, it needs
break the loop rather than continuing it, in order to avoid accessing
invalid dic pointer.
Fixes:
6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Mon, 28 Aug 2023 14:04:14 +0000 (22:04 +0800)]
f2fs: compress: fix deadloop in f2fs_write_cache_pages()
[ Upstream commit
c5d3f9b7649abb20aa5ab3ebff9421a171eaeb22 ]
With below mount option and testcase, it hangs kernel.
1. mount -t f2fs -o compress_log_size=5 /dev/vdb /mnt/f2fs
2. touch /mnt/f2fs/file
3. chattr +c /mnt/f2fs/file
4. dd if=/dev/zero of=/mnt/f2fs/file bs=1MB count=1
5. sync
6. dd if=/dev/zero of=/mnt/f2fs/file bs=111 count=11 conv=notrunc
7. sync
INFO: task sync:4788 blocked for more than 120 seconds.
Not tainted 6.5.0-rc1+ #322
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:sync state:D stack:0 pid:4788 ppid:509 flags:0x00000002
Call Trace:
<TASK>
__schedule+0x335/0xf80
schedule+0x6f/0xf0
wb_wait_for_completion+0x5e/0x90
sync_inodes_sb+0xd8/0x2a0
sync_inodes_one_sb+0x1d/0x30
iterate_supers+0x99/0xf0
ksys_sync+0x46/0xb0
__do_sys_sync+0x12/0x20
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
The reason is f2fs_all_cluster_page_ready() assumes that pages array should
cover at least one cluster, otherwise, it will always return false, result
in deadloop.
By default, pages array size is 16, and it can cover the case cluster_size
is equal or less than 16, for the case cluster_size is larger than 16, let's
allocate memory of pages array dynamically.
Fixes:
4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Jihong [Sat, 12 Aug 2023 08:49:04 +0000 (08:49 +0000)]
perf kwork: Set ordered_events to true in 'struct perf_tool'
[ Upstream commit
0c526579a4b2b6ecd540472f2e34c2850cf70f76 ]
'perf kwork' processes data based on timestamps and needs to sort events.
Fixes:
f98919ec4fccdacf ("perf kwork: Implement 'report' subcommand")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230812084917.169338-4-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log