Mimi Zohar [Wed, 24 Nov 2021 07:08:00 +0000 (12:38 +0530)]
selftest/kexec: fix "ignored null byte in input" warning
Instead of assigning the string to a variable, which might contain a
null character, redirect the output and grep for the string directly.
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Lee, Chun-Yi [Sat, 18 Dec 2021 02:09:05 +0000 (10:09 +0800)]
integrity: Do not load MOK and MOKx when secure boot be disabled
The security of Machine Owner Key (MOK) relies on secure boot. When
secure boot is disabled, EFI firmware will not verify binary code. Then
arbitrary efi binary code can modify MOK when rebooting.
This patch prevents MOK/MOKx be loaded when secure boot be disabled.
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Takashi Iwai [Mon, 13 Dec 2021 16:11:45 +0000 (17:11 +0100)]
ima: Fix undefined arch_ima_get_secureboot() and co
Currently arch_ima_get_secureboot() and arch_get_ima_policy() are
defined only when CONFIG_IMA is set, and this makes any code calling
those functions without CONFIG_IMA fail.
Move the declaration and the dummy definition of those functions
outside ifdef-CONFIG_IMA block for fixing the undefined symbols.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[zohar@linux.ibm.com: removed in-tree/out-of-tree comment in patch description]
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Linus Torvalds [Sun, 21 Nov 2021 21:47:39 +0000 (13:47 -0800)]
Linux 5.16-rc2
Linus Torvalds [Sun, 21 Nov 2021 19:25:19 +0000 (11:25 -0800)]
Merge tag 'x86-urgent-2021-11-21' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Move the command line preparation and the early command line parsing
earlier so that the command line parameters which affect
early_reserve_memory(), e.g. efi=nosftreserve, are taken into
account. This was broken when the invocation of
early_reserve_memory() was moved recently.
- Use an atomic type for the SGX page accounting, which is read and
written locklessly, to plug various race conditions related to it.
* tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Fix free page accounting
x86/boot: Pull up cmdline preparation and early param parsing
Linus Torvalds [Sun, 21 Nov 2021 19:17:50 +0000 (11:17 -0800)]
Merge tag 'perf-urgent-2021-11-21' of git://git./linux/kernel/git/tip/tip
Pull x86 perf fixes from Thomas Gleixner:
- Remove unneded PEBS disabling when taking LBR snapshots to prevent an
unchecked MSR access error.
- Fix IIO event constraints for Snowridge and Skylake server chips.
* tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Fix snapshot_branch_stack warning in VM
perf/x86/intel/uncore: Fix IIO event constraints for Snowridge
perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
Linus Torvalds [Sun, 21 Nov 2021 18:26:35 +0000 (10:26 -0800)]
Merge tag 'powerpc-5.16-2' of git://git./linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
- Fix a bug in copying of sigset_t for 32-bit systems, which caused X
to not start.
- Fix handling of shared LSIs (rare) with the xive interrupt controller
(Power9/10).
- Fix missing TOC setup in some KVM code, which could result in oopses
depending on kernel data layout.
- Fix DMA mapping when we have persistent memory and only one DMA
window available.
- Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a
recent fix.
- A couple of other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater,
Christian Zigotzky, Christophe Leroy, Daniel Axtens, Finn Thain, Greg
Kurz, Masahiro Yamada, Nicholas Piggin, and Uwe Kleine-König.
* tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Change IRQ domain to a tree domain
powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX
powerpc/signal32: Fix sigset_t copy
powerpc/book3e: Fix TLBCAM preset at boot
powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window
powerpc/pseries/ddw: simplify enable_ddw()
powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory"
powerpc/pseries: Fix numa FORM2 parsing fallback code
powerpc/pseries: rename numa_dist_table to form2_distances
powerpc: clean vdso32 and vdso64 directories
powerpc/83xx/mpc8349emitx: Drop unused variable
KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()
Geert Uytterhoeven [Thu, 18 Nov 2021 18:26:21 +0000 (10:26 -0800)]
pstore/blk: Use "%lu" to format unsigned long
On 32-bit:
fs/pstore/blk.c: In function ‘__best_effort_init’:
include/linux/kern_levels.h:5:18: warning: format ‘%zu’ expects argument of type ‘size_t’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
include/linux/kern_levels.h:14:19: note: in expansion of macro ‘KERN_SOH’
14 | #define KERN_INFO KERN_SOH "6" /* informational */
| ^~~~~~~~
include/linux/printk.h:373:9: note: in expansion of macro ‘KERN_INFO’
373 | printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~
fs/pstore/blk.c:314:3: note: in expansion of macro ‘pr_info’
314 | pr_info("attached %s (%zu) (no dedicated panic_write!)\n",
| ^~~~~~~
Cc: stable@vger.kernel.org
Fixes:
7bb9557b48fcabaa ("pstore/blk: Use the normal block device I/O path")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210629103700.1935012-1-geert@linux-m68k.org
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 20 Nov 2021 21:17:24 +0000 (13:17 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"15 patches.
Subsystems affected by this patch series: ipc, hexagon, mm (swap,
slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
proc/vmcore: fix clearing user buffer by properly using clear_user()
kmap_local: don't assume kmap PTEs are linear arrays in memory
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
kasan: test: silence intentional read overflow warnings
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
hugetlb: fix hugetlb cgroup refcounting during mremap
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
hexagon: ignore vmlinux.lds
hexagon: clean up timer-regs.h
hexagon: export raw I/O routines for modules
mm: emit the "free" trace report before freeing memory in kmem_cache_free()
shm: extend forced shm destroy to support objects from several IPC nses
ipc: WARN if trying to remove ipc object which is absent
mm/swap.c:put_pages_list(): reinitialise the page list
Linus Torvalds [Sat, 20 Nov 2021 19:05:10 +0000 (11:05 -0800)]
Merge tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Flip a cap check to avoid a selinux error (Alistair)
- Fix for a regression this merge window where we can miss a queue ref
put (me)
- Un-mark pstore-blk as broken, as the condition that triggered that
change has been rectified (Kees)
- Queue quiesce and sync fixes (Ming)
- FUA insertion fix (Ming)
- blk-cgroup error path put fix (Yu)
* tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block:
blk-mq: don't insert FUA request with data into scheduler queue
blk-cgroup: fix missing put device in error path from blkg_conf_pref()
block: avoid to quiesce queue in elevator_init_mq
Revert "mark pstore-blk as broken"
blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release()
block: fix missing queue put in error path
block: Check ADMIN before NICE for IOPRIO_CLASS_RT
Linus Torvalds [Sat, 20 Nov 2021 18:59:03 +0000 (10:59 -0800)]
Merge tag 'pinctrl-v5.16-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"There is an ACPI stubs fix which is ACKed by the ACPI maintainer for
merging through my tree.
One item stand out and that is that I delete the <linux/sdb.h> header
that is used by nothing. I deleted this subsystem (through the GPIO
tree) a while back so I feel responsible for tidying up the floor.
Other than that it is the usual mistakes, a bit noisy around build
issue and Kconfig then driver fixes.
Specifics:
- Fix some stubs causing compile issues for ACPI.
- Fix some wakeups on AMD IRQs shared between GPIO and SCI.
- Fix a build warning in the Tegra driver.
- Fix a Kconfig issue in the Qualcomm driver.
- Add a missing include the RALink driver.
- Return a valid type for the Apple pinctrl IRQs.
- Implement some Qualcomm SDM845 dual-edge errata.
- Remove the unused <linux/sdb.h> header. (The subsystem was once
deleted by the pinctrl maintainer...)
- Fix a duplicate initialized in the Tegra driver.
- Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver"
* tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: sm8350: Correct UFS and SDC offsets
pinctrl: tegra194: remove duplicate initializer again
Remove unused header <linux/sdb.h>
pinctrl: qcom: sdm845: Enable dual edge errata
pinctrl: apple: Always return valid type in apple_gpio_irq_type
pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c'
pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP
pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group()
pinctrl: amd: Fix wakeups when IRQ is shared with SCI
ACPI: Add stubs for wakeup handler functions
Linus Torvalds [Sat, 20 Nov 2021 18:55:50 +0000 (10:55 -0800)]
Merge tag 's390-5.16-3' of git://git./linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add missing Kconfig option for ftrace direct multi sample, so it can
be compiled again, and also add s390 support for this sample.
- Update Christian Borntraeger's email address.
- Various fixes for memory layout setup. Besides other this makes it
possible to load shared DCSS segments again.
- Fix copy to user space of swapped kdump oldmem.
- Remove -mstack-guard and -mstack-size compile options when building
vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and
results in broken vdso code which causes more or less random
exceptions. Also remove the not needed -nostdlib option.
- Fix memory leak on cpu hotplug and return code handling in kexec
code.
- Wire up futex_waitv system call.
- Replace snprintf with sysfs_emit where appropriate.
* tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
ftrace/samples: add s390 support for ftrace direct multi sample
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
MAINTAINERS: update email address of Christian Borntraeger
s390/kexec: fix memory leak of ipl report buffer
s390/kexec: fix return code handling
s390/dump: fix copying to user-space of swapped kdump oldmem
s390: wire up sys_futex_waitv system call
s390/vdso: filter out -mstack-guard and -mstack-size
s390/vdso: remove -nostdlib compiler flag
s390: replace snprintf in show functions with sysfs_emit
s390/boot: simplify and fix kernel memory layout setup
s390/setup: re-arrange memblock setup
s390/setup: avoid using memblock_enforce_memory_limit
s390/setup: avoid reserving memory above identity mapping
Linus Torvalds [Sat, 20 Nov 2021 18:47:16 +0000 (10:47 -0800)]
Merge tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes: two to address minor coverity issues and
one cleanup"
* tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: introduce cifs_ses_mark_for_reconnect() helper
cifs: protect srv_count with cifs_tcp_ses_lock
cifs: move debug print out of spinlock
David Hildenbrand [Sat, 20 Nov 2021 00:43:58 +0000 (16:43 -0800)]
proc/vmcore: fix clearing user buffer by properly using clear_user()
To clear a user buffer we cannot simply use memset, we have to use
clear_user(). With a virtio-mem device that registers a vmcore_cb and
has some logically unplugged memory inside an added Linux memory block,
I can easily trigger a BUG by copying the vmcore via "cp":
systemd[1]: Starting Kdump Vmcore Save Service...
kdump[420]: Kdump is using the default log level(3).
kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[465]: saving vmcore-dmesg.txt complete
kdump[467]: saving vmcore
BUG: unable to handle page fault for address:
00007f2374e01000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD
7a523067 P4D
7a523067 PUD
7a528067 PMD
7a525067 PTE
800000007048f867
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86
Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81
RSP: 0018:
ffffc9000073be08 EFLAGS:
00010212
RAX:
0000000000001000 RBX:
00000000002fd000 RCX:
00007f2374e01000
RDX:
0000000000000001 RSI:
00000000ffffdfff RDI:
00007f2374e01008
RBP:
0000000000001000 R08:
0000000000000000 R09:
ffffc9000073bc50
R10:
ffffc9000073bc48 R11:
ffffffff829461a8 R12:
000000000000f000
R13:
00007f2374e01000 R14:
0000000000000000 R15:
ffff88807bd421e8
FS:
00007f2374e12140(0000) GS:
ffff88807f000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f2374e01000 CR3:
000000007a4aa000 CR4:
0000000000350eb0
Call Trace:
read_vmcore+0x236/0x2c0
proc_reg_read+0x55/0xa0
vfs_read+0x95/0x190
ksys_read+0x4f/0xc0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access
Prevention (SMAP)", which is used to detect wrong access from the kernel
to user buffers like this: SMAP triggers a permissions violation on
wrong access. In the x86-64 variant of clear_user(), SMAP is properly
handled via clac()+stac().
To fix, properly use clear_user() when we're dealing with a user buffer.
Link: https://lkml.kernel.org/r/20211112092750.6921-1-david@redhat.com
Fixes:
997c136f518c ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ard Biesheuvel [Sat, 20 Nov 2021 00:43:55 +0000 (16:43 -0800)]
kmap_local: don't assume kmap PTEs are linear arrays in memory
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/
Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org
Fixes:
2a15ba82fa6c ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SeongJae Park [Sat, 20 Nov 2021 00:43:52 +0000 (16:43 -0800)]
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
DAMON debugfs is supposed to protect dbgfs_ctxs, dbgfs_nr_ctxs, and
dbgfs_dirs using damon_dbgfs_lock. However, some of the code is
accessing the variables without the protection. This fixes it by
protecting all such accesses.
Link: https://lkml.kernel.org/r/20211110145758.16558-3-sj@kernel.org
Fixes:
75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SeongJae Park [Sat, 20 Nov 2021 00:43:49 +0000 (16:43 -0800)]
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
Patch series "DAMON fixes".
This patch (of 2):
DAMON users can trigger below warning in '__alloc_pages()' by invoking
write() to some DAMON debugfs files with arbitrarily high count
argument, because DAMON debugfs interface allocates some buffers based
on the user-specified 'count'.
if (unlikely(order >= MAX_ORDER)) {
WARN_ON_ONCE(!(gfp & __GFP_NOWARN));
return NULL;
}
Because the DAMON debugfs interface code checks failure of the
'kmalloc()', this commit simply suppresses the warnings by adding
'__GFP_NOWARN' flag.
Link: https://lkml.kernel.org/r/20211110145758.16558-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211110145758.16558-2-sj@kernel.org
Fixes:
4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Sat, 20 Nov 2021 00:43:46 +0000 (16:43 -0800)]
kasan: test: silence intentional read overflow warnings
As done in commit
d73dad4eb5ad ("kasan: test: bypass __alloc_size
checks") for __write_overflow warnings, also silence some more cases
that trip the __read_overflow warnings seen in 5.16-rc1[1]:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:10,
from include/linux/cpumask.h:12,
from include/linux/mm_types_task.h:14,
from include/linux/mm_types.h:5,
from include/linux/page-flags.h:13,
from arch/arm64/include/asm/mte.h:14,
from arch/arm64/include/asm/pgtable.h:12,
from include/linux/pgtable.h:6,
from include/linux/kasan.h:29,
from lib/test_kasan.c:10:
In function 'memcmp',
inlined from 'kasan_memcmp' at lib/test_kasan.c:897:2:
include/linux/fortify-string.h:263:25: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
263 | __read_overflow();
| ^~~~~~~~~~~~~~~~~
In function 'memchr',
inlined from 'kasan_memchr' at lib/test_kasan.c:872:2:
include/linux/fortify-string.h:277:17: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
277 | __read_overflow();
| ^~~~~~~~~~~~~~~~~
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/
14660585/log/
Link: https://lkml.kernel.org/r/20211116004111.3171781-1-keescook@chromium.org
Fixes:
d73dad4eb5ad ("kasan: test: bypass __alloc_size checks")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mina Almasry [Sat, 20 Nov 2021 00:43:43 +0000 (16:43 -0800)]
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we
bail out using "goto out_release_unlock;" in the cases where idx >=
size, or !huge_pte_none(), the code will detect that new_pagecache_page
== false, and so call restore_reserve_on_error(). In this case I see
restore_reserve_on_error() delete the reservation, and the following
call to remove_inode_hugepages() will increment h->resv_hugepages
causing a 100% reproducible leak.
We should treat the is_continue case similar to adding a page into the
pagecache and set new_pagecache_page to true, to indicate that there is
no reservation to restore on the error path, and we need not call
restore_reserve_on_error(). Rename new_pagecache_page to
page_in_pagecache to make that clear.
Link: https://lkml.kernel.org/r/20211117193825.378528-1-almasrymina@google.com
Fixes:
c7b1850dfb41 ("hugetlb: don't pass page cache pages to restore_reserve_on_error")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reported-by: James Houghton <jthoughton@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bui Quang Minh [Sat, 20 Nov 2021 00:43:40 +0000 (16:43 -0800)]
hugetlb: fix hugetlb cgroup refcounting during mremap
When hugetlb_vm_op_open() is called during copy_vma(), we may take the
reference to resv_map->css. Later, when clearing the reservation
pointer of old_vma after transferring it to new_vma, we forget to drop
the reference to resv_map->css. This leads to a reference leak of css.
Fixes this by adding a check to drop reservation css reference in
clear_vma_resv_huge_pages()
Link: https://lkml.kernel.org/r/20211113154412.91134-1-minhquangbui99@gmail.com
Fixes:
550a7d60bd5e35 ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rustam Kovhaev [Sat, 20 Nov 2021 00:43:37 +0000 (16:43 -0800)]
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console. At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.
kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.
Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB
Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com
Fixes:
d8843922fba4 ("slab: Ignore internal flags in cache creation")
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Glauber Costa <glommer@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nathan Chancellor [Sat, 20 Nov 2021 00:43:34 +0000 (16:43 -0800)]
hexagon: ignore vmlinux.lds
After building allmodconfig, there is an untracked vmlinux.lds file in
arch/hexagon/kernel:
$ git ls-files . --exclude-standard --others
arch/hexagon/kernel/vmlinux.lds
Ignore it as all other architectures have.
Link: https://lkml.kernel.org/r/20211115174250.1994179-4-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nathan Chancellor [Sat, 20 Nov 2021 00:43:31 +0000 (16:43 -0800)]
hexagon: clean up timer-regs.h
When building allmodconfig, there is a warning about TIMER_ENABLE being
redefined:
drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined]
#define TIMER_ENABLE BIT(7)
^
arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here
#define TIMER_ENABLE 0
^
1 error generated.
The values in this header are only used in one file each, if they are
used at all. Remove the header and sink all of the constants into their
respective files.
TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h
TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.
SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit
71e4a47f32f4 ("Hexagon: Add time and timer
functions").
TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.
Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nathan Chancellor [Sat, 20 Nov 2021 00:43:28 +0000 (16:43 -0800)]
hexagon: export raw I/O routines for modules
Patch series "Fixes for ARCH=hexagon allmodconfig", v2.
This series fixes some issues noticed with ARCH=hexagon allmodconfig.
This patch (of 3):
When building ARCH=hexagon allmodconfig, the following errors occur:
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
Export these symbols so that modules can use them without any errors.
Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org
Fixes:
013bf24c3829 ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yunfeng Ye [Sat, 20 Nov 2021 00:43:25 +0000 (16:43 -0800)]
mm: emit the "free" trace report before freeing memory in kmem_cache_free()
After the memory is freed, it can be immediately allocated by other
CPUs, before the "free" trace report has been emitted. This causes
inaccurate traces.
For example, if the following sequence of events occurs:
CPU 0 CPU 1
(1) alloc xxxxxx
(2) free xxxxxx
(3) alloc xxxxxx
(4) free xxxxxx
Then they will be inaccurately reported via tracing, so that they appear
to have happened in this order:
CPU 0 CPU 1
(1) alloc xxxxxx
(2) alloc xxxxxx
(3) free xxxxxx
(4) free xxxxxx
This makes it look like CPU 1 somehow managed to allocate memory that
CPU 0 still had allocated for itself.
In order to avoid this, emit the "free xxxxxx" tracing report just
before the actual call to free the memory, instead of just after it.
Link: https://lkml.kernel.org/r/374eb75d-7404-8721-4e1e-65b0e5b17279@huawei.com
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Mikhalitsyn [Sat, 20 Nov 2021 00:43:21 +0000 (16:43 -0800)]
shm: extend forced shm destroy to support objects from several IPC nses
Currently, the exit_shm() function not designed to work properly when
task->sysvshm.shm_clist holds shm objects from different IPC namespaces.
This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it
leads to use-after-free (reproducer exists).
This is an attempt to fix the problem by extending exit_shm mechanism to
handle shm's destroy from several IPC ns'es.
To achieve that we do several things:
1. add a namespace (non-refcounted) pointer to the struct shmid_kernel
2. during new shm object creation (newseg()/shmget syscall) we
initialize this pointer by current task IPC ns
3. exit_shm() fully reworked such that it traverses over all shp's in
task->sysvshm.shm_clist and gets IPC namespace not from current task
as it was before but from shp's object itself, then call
shm_destroy(shp, ns).
Note: We need to be really careful here, because as it was said before
(1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we
using special helper get_ipc_ns_not_zero() which allows to get IPC ns
refcounter only if IPC ns not in the "state of destruction".
Q/A
Q: Why can we access shp->ns memory using non-refcounted pointer?
A: Because shp object lifetime is always shorther than IPC namespace
lifetime, so, if we get shp object from the task->sysvshm.shm_clist
while holding task_lock(task) nobody can steal our namespace.
Q: Does this patch change semantics of unshare/setns/clone syscalls?
A: No. It's just fixes non-covered case when process may leave IPC
namespace without getting task->sysvshm.shm_clist list cleaned up.
Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com
Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com
Fixes:
ab602f79915 ("shm: make exit_shm work proportional to task activity")
Co-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Mikhalitsyn [Sat, 20 Nov 2021 00:43:18 +0000 (16:43 -0800)]
ipc: WARN if trying to remove ipc object which is absent
Patch series "shm: shm_rmid_forced feature fixes".
Some time ago I met kernel crash after CRIU restore procedure,
fortunately, it was CRIU restore, so, I had dump files and could do
restore many times and crash reproduced easily. After some
investigation I've constructed the minimal reproducer. It was found
that it's use-after-free and it happens only if sysctl
kernel.shm_rmid_forced = 1.
The key of the problem is that the exit_shm() function not handles shp's
object destroy when task->sysvshm.shm_clist contains items from
different IPC namespaces. In most cases this list will contain only
items from one IPC namespace.
How can this list contain object from different namespaces? The
exit_shm() function is designed to clean up this list always when
process leaves IPC namespace. But we made a mistake a long time ago and
did not add a exit_shm() call into the setns() syscall procedures.
The first idea was just to add this call to setns() syscall but it
obviously changes semantics of setns() syscall and that's
userspace-visible change. So, I gave up on this idea.
The first real attempt to address the issue was just to omit forced
destroy if we meet shp object not from current task IPC namespace [1].
But that was not the best idea because task->sysvshm.shm_clist was
protected by rwsem which belongs to current task IPC namespace. It
means that list corruption may occur.
Second approach is just extend exit_shm() to properly handle shp's from
different IPC namespaces [2]. This is really non-trivial thing, I've
put a lot of effort into that but not believed that it's possible to
make it fully safe, clean and clear.
Thanks to the efforts of Manfred Spraul working an elegant solution was
designed. Thanks a lot, Manfred!
Eric also suggested the way to address the issue in ("[RFC][PATCH] shm:
In shm_exit destroy all created and never attached segments") Eric's
idea was to maintain a list of shm_clists one per IPC namespace, use
lock-less lists. But there is some extra memory consumption-related
concerns.
An alternative solution which was suggested by me was implemented in
("shm: reset shm_clist on setns but omit forced shm destroy"). The idea
is pretty simple, we add exit_shm() syscall to setns() but DO NOT
destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just
clean up the task->sysvshm.shm_clist list.
This chages semantics of setns() syscall a little bit but in comparision
to the "naive" solution when we just add exit_shm() without any special
exclusions this looks like a safer option.
[1] https://lkml.org/lkml/2021/7/6/1108
[2] https://lkml.org/lkml/2021/7/14/736
This patch (of 2):
Let's produce a warning if we trying to remove non-existing IPC object
from IPC namespace kht/idr structures.
This allows us to catch possible bugs when the ipc_rmid() function was
called with inconsistent struct ipc_ids*, struct kern_ipc_perm*
arguments.
Link: https://lkml.kernel.org/r/20211027224348.611025-1-alexander.mikhalitsyn@virtuozzo.com
Link: https://lkml.kernel.org/r/20211027224348.611025-2-alexander.mikhalitsyn@virtuozzo.com
Co-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Sat, 20 Nov 2021 00:43:15 +0000 (16:43 -0800)]
mm/swap.c:put_pages_list(): reinitialise the page list
While free_unref_page_list() puts pages onto the CPU local LRU list, it
does not remove them from the list they were passed in on. That makes
the list_head appear to be non-empty, and would lead to various
corruption problems if we didn't have an assertion that the list was
empty.
Reinitialise the list after calling free_unref_page_list() to avoid this
problem.
Link: https://lkml.kernel.org/r/YYp40A2lNrxaZji8@casper.infradead.org
Fixes:
988c69f1bc23 ("mm: optimise put_pages_list()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Steve French <stfrench@microsoft.com>
Reported-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Steve French <stfrench@microsoft.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Hyeoncheol Lee <hyc.lee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 19 Nov 2021 22:15:14 +0000 (14:15 -0800)]
Merge tag 'libata-5.16-rc2' of git://git./linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
- Prevent accesses to unsupported log pages as that causes device scan
failures with LLDDs using libsas (from me).
- A couple of fixes for AMD AHCI adapters handling of low power modes
and resume (from Mario).
- Fix a compilation warning (from me).
* tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Declare ata_ncq_sdev_attrs static
ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
ata: libata: add missing ata_identify_page_supported() calls
ata: libata: improve ata_read_log_page() error message
Linus Torvalds [Fri, 19 Nov 2021 21:50:48 +0000 (13:50 -0800)]
Merge tag 'trace-v5.16-6' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix double free in destroy_hist_field
- Harden memset() of trace_iterator structure
- Do not warn in trace printk check when test buffer fills up
* tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Don't use out-of-sync va_list in event printing
tracing: Use memset_startat() to zero struct trace_iterator
tracing/histogram: Fix UAF in destroy_hist_field()
Linus Torvalds [Fri, 19 Nov 2021 20:47:29 +0000 (12:47 -0800)]
Merge tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix the 'local_weight', 'weight' (memory access latency),
'local_ins_lat', 'ins_lat' (instruction latency) and 'pstage_cyc'
(pipeline stage cycles) sort key sample aggregation.
- Fix 'perf test' entry for watchpoints on s/390.
- Fix branch_stack entry endianness check in the 'perf test' sample
parsing test.
- Fix ARM SPE handling on 'perf inject'.
- Fix memory leaks detected with ASan.
- Fix build on arm64 related to reallocarray() availability.
- Sync copies of kernel headers: cpufeatures, kvm, MIPS syscalltable
(futex_waitv).
* tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf evsel: Fix memory leaks relating to unit
perf report: Fix memory leaks around perf_tip()
perf hist: Fix memory leak of a perf_hpp_fmt
tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall
tools build: Fix removal of feature-sync-compare-and-swap feature detection
perf inject: Fix ARM SPE handling
perf bench: Fix two memory leaks detected with ASan
perf test sample-parsing: Fix branch_stack entry endianness check
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf sort: Fix the 'p_stage_cyc' sort key behavior
perf sort: Fix the 'ins_lat' sort key behavior
perf sort: Fix the 'weight' sort key behavior
perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1
perf tests wp: Remove unused functions on s390
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
Linus Torvalds [Fri, 19 Nov 2021 19:40:14 +0000 (11:40 -0800)]
Merge tag 'riscv-for-linus-5.16-rc2' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I have two patches for 5.16:
- allow external modules to be built against read-only source trees
- turn KVM on in the defconfigs
The second one isn't technically a fix, but it got tied up pending
some defconfig cleanups that ended up finding some larger issues. I
figured it'd be better to get the config changes some more testing,
but didn't want to hold up turning KVM on for that"
* tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix building external modules
RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module
Linus Torvalds [Fri, 19 Nov 2021 19:33:31 +0000 (11:33 -0800)]
Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
cleanups.
This is essentially the change you suggested with all of i's dotted
and the t's crossed so that ptrace can intercept all of the cases it
has been able to intercept the past, and all of the cases that made it
to exit without giving ptrace a chance still don't give ptrace a
chance"
* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Replace force_fatal_sig with force_exit_sig when in doubt
signal: Don't always set SA_IMMUTABLE for forced signals
Linus Torvalds [Fri, 19 Nov 2021 19:19:58 +0000 (11:19 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes, five in drivers (ufs, qla2xxx, iscsi) and one core change
to fix a regression in user space device state setting, which is used
by the iscsi daemons to effect device recovery"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id()
scsi: ufs: core: Fix another task management completion race
scsi: ufs: core: Fix task management completion timeout race
scsi: core: sysfs: Fix hang when device state is set via sysfs
scsi: iscsi: Unblock session then wake up error handler
scsi: ufs: core: Improve SCSI abort handling
Linus Torvalds [Fri, 19 Nov 2021 19:07:13 +0000 (11:07 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"There are a few big regression items from the merge window suggesting
that people are testing rc1's but not testing the for-next branches:
- Warnings fixes
- Crash in hf1 when creating QPs and setting counters
- Some old mlx4 cards fail to probe due to missing counters
- Syzkaller crash in the new counters code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update for VMware PVRDMA driver
RDMA/nldev: Check stat attribute before accessing it
RDMA/mlx4: Do not fail the registration on port stats
IB/hfi1: Properly allocate rdma counter desc memory
RDMA/core: Set send and receive CQ before forwarding to the driver
RDMA/netlink: Add __maybe_unused to static inline in C file
Linus Torvalds [Fri, 19 Nov 2021 19:02:09 +0000 (11:02 -0800)]
Merge tag 'gpio-fixes-for-v5.16-rc2' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a coccicheck warning in gpio-virtio
- fix gpio selftests build issues
- fix a Kconfig issue in gpio-rockchip
* tag 'gpio-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors
selftests: gpio: restore CFLAGS options
selftests: gpio: fix uninitialised variable warning
selftests: gpio: fix gpio compiling error
gpio: virtio: remove unneeded semicolon
Linus Torvalds [Fri, 19 Nov 2021 18:50:11 +0000 (10:50 -0800)]
Merge tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This week's fixes, pretty quiet, about right for rc2. amdgpu is the
bulk of them but the scheduler ones have been reported in a few places
I think.
Otherwise just some minor i915 fixes and a few other scattered around:
scheduler:
- two refcounting fixes
cma-helper:
- use correct free path for noncoherent
efifb:
- probing fix
amdgpu:
- Better debugging info for SMU msgs
- Better error reporting when adding IP blocks
- Fix UVD powergating regression on CZ
- Clock reporting fix for navi1x
- OLED panel backlight fix
- Fix scaling on VGA/DVI for non-DC display code
- Fix GLFCLK handling for RGP on some APUs
- fix potential memory leak
amdkfd:
- GPU reset fix
i915:
- return error handling fix
- ADL-P display fix
- TGL DSI display clocks fix
nouveau:
- infoframe corruption fix
sun4i:
- Kconfig fix"
* tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm:
drm/amd/amdgpu: fix potential memleak
drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again
drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs
drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
drm/amd/display: Fix OLED brightness control on eDP
drm/amd/pm: Remove artificial freq level on Navi1x
drm/amd/pm: avoid duplicate powergate/ungate setting
drm/amdgpu: add error print when failing to add IP block(v2)
drm/amd/pm: Enhanced reporting also for a stuck command
drm/i915/guc: fix NULL vs IS_ERR() checking
drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB
Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping"
fbdev: Prevent probing generic drivers if a FB is already registered
drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder
drm/scheduler: fix drm_sched_job_add_implicit_dependencies
drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY
drm/cma-helper: Release non-coherent memory with dma_free_noncoherent()
drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
Peter Zijlstra [Fri, 19 Nov 2021 09:29:47 +0000 (10:29 +0100)]
x86: Pin task-stack in __get_wchan()
When commit
5d1ceb3969b6 ("x86: Fix __get_wchan() for !STACKTRACE")
moved from stacktrace to native unwind_*() usage, the
try_get_task_stack() got lost, leading to use-after-free issues for
dying tasks.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fixes:
5d1ceb3969b6 ("x86: Fix __get_wchan() for !STACKTRACE")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215031
Link: https://lore.kernel.org/stable/YZV02RCRVHIa144u@fedora64.linuxtx.org/
Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric W. Biederman [Thu, 18 Nov 2021 20:23:21 +0000 (14:23 -0600)]
signal: Replace force_fatal_sig with force_exit_sig when in doubt
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/
20211117150258.GB5403@xsang-OptiPlex-9020
Fixes:
00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes:
a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes:
83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes:
9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes:
086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes:
c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes:
695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes:
1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes:
941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Eric W. Biederman [Thu, 18 Nov 2021 17:11:13 +0000 (11:11 -0600)]
signal: Don't always set SA_IMMUTABLE for forced signals
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect to be
able to trap synchronous SIGTRAP and SIGSEGV even when the target
process is not configured to handle those signals.
Update force_sig_to_task to support both the case when we can allow
the debugger to intercept and possibly ignore the signal and the case
when it is not safe to let userspace know about the signal until the
process has exited.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable@vger.kernel.org
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/
20211117150258.GB5403@xsang-OptiPlex-9020
Fixes:
00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Link: https://lkml.kernel.org/r/877dd5qfw5.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Bryan Tan [Fri, 19 Nov 2021 11:19:30 +0000 (03:19 -0800)]
MAINTAINERS: Update for VMware PVRDMA driver
Update maintainer info for the VMware PVRDMA driver.
Link: https://lore.kernel.org/r/1637320770-44878-1-git-send-email-bryantan@vmware.com
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Ming Lei [Thu, 18 Nov 2021 15:30:41 +0000 (23:30 +0800)]
blk-mq: don't insert FUA request with data into scheduler queue
We never insert flush request into scheduler queue before.
Recently commit
d92ca9d8348f ("blk-mq: don't handle non-flush requests in
blk_insert_flush") tries to handle FUA data request as normal request.
This way has caused warning[1] in mq-deadline dd_exit_sched() or io hang in
case of kyber since RQF_ELVPRIV isn't set for flush request, then
->finish_request won't be called.
Fix the issue by inserting FUA data request with blk_mq_request_bypass_insert()
when the device supports FUA, just like what we did before.
[1] https://lore.kernel.org/linux-block/CAHj4cs-_vkTW=dAzbZYGxpEWSpzpcmaNeY1R=vH311+9vMUSdg@mail.gmail.com/
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes:
d92ca9d8348f ("blk-mq: don't handle non-flush requests in blk_insert_flush")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20211118153041.2163228-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yu Kuai [Tue, 2 Nov 2021 02:07:05 +0000 (10:07 +0800)]
blk-cgroup: fix missing put device in error path from blkg_conf_pref()
If blk_queue_enter() failed due to queue is dying, the
blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
Fixes:
0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20211102020705.2321858-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Andreas Schwab [Tue, 2 Nov 2021 15:51:43 +0000 (16:51 +0100)]
riscv: fix building external modules
When building external modules, vdso_prepare should not be run. If the
kernel sources are read-only, it will fail.
Fixes:
fde9c59aebaf ("riscv: explicitly use symbol offsets for VDSO")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Anup Patel [Wed, 17 Nov 2021 08:47:05 +0000 (14:17 +0530)]
RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module
Let's enable KVM RISC-V in RV64 and RV32 defconfigs as module
so that it always built along with the default kernel image.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Dave Airlie [Fri, 19 Nov 2021 04:23:14 +0000 (14:23 +1000)]
Merge tag 'amd-drm-fixes-5.16-2021-11-17' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-11-17:
amdgpu:
- Better debugging info for SMU msgs
- Better error reporting when adding IP blocks
- Fix UVD powergating regression on CZ
- Clock reporting fix for navi1x
- OLED panel backlight fix
- Fix scaling on VGA/DVI for non-DC display code
- Fix GLFCLK handling for RGP on some APUs
- fix potential memory leak
amdkfd:
- GPU reset fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118041638.20831-1-alexander.deucher@amd.com
Dave Airlie [Fri, 19 Nov 2021 03:36:53 +0000 (13:36 +1000)]
Merge tag 'drm-intel-fixes-2021-11-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
One quick fix for return error handling, one fix for ADL-P display
and one revert targeting stable 5.4, for TGL's DSI display clocks
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YZbUPIHpR1S3JZ2b@intel.com
Dave Airlie [Fri, 19 Nov 2021 03:28:54 +0000 (13:28 +1000)]
Merge tag 'drm-misc-fixes-2021-11-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A infoframe corruption fix for nouveau, a wrong free function usage fix
for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for
drm/scheduler refcounting and a probing fix for efifb.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118075447.5rn6zaulnrequqnm@gilmour
Nikita Yushchenko [Thu, 18 Nov 2021 14:55:16 +0000 (17:55 +0300)]
tracing: Don't use out-of-sync va_list in event printing
If trace_seq becomes full, trace_seq_vprintf() no longer consumes
arguments from va_list, making va_list out of sync with format
processing by trace_check_vprintf().
This causes va_arg() in trace_check_vprintf() to return wrong
positional argument, which results into a WARN_ON_ONCE() hit.
ftrace_stress_test from LTP triggers this situation.
Fix it by explicitly avoiding further use if va_list at the point
when it's consistency can no longer be guaranteed.
Link: https://lkml.kernel.org/r/20211118145516.13219-1-nikita.yushchenko@virtuozzo.com
Signed-off-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Kees Cook [Thu, 18 Nov 2021 20:22:17 +0000 (12:22 -0800)]
tracing: Use memset_startat() to zero struct trace_iterator
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() to avoid confusing memset() about writing beyond
the target struct member.
Link: https://lkml.kernel.org/r/20211118202217.1285588-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Fri, 19 Nov 2021 01:09:05 +0000 (17:09 -0800)]
Merge tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux
Pull zstd fixes from Nick Terrell:
"Fix stack usage on parisc & improve code size bloat
This contains three commits:
1. Fixes a minor unused variable warning reported by Kernel test
robot [0].
2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
some functions that are unlikely to be used in performance
sensitive workloads.
3. Fixes the reported excess stack usage on parisc [2] by removing
-O3 from zstd's compilation flags. -O3 triggered bugs in the
hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable:
neutral compression, about -1% decompression speed. We also reduce
code bloat (-105KB / 374KB).
After this our code bloat is cut from 374KB to 105KB with gcc-11. If
we wanted to cut the remaining 105KB we'd likely have to trade
signicant performance, so I want to say that this is enough for now.
We should be able to get further gains without sacrificing speed, but
that will take some significant optimization effort, and isn't
suitable for a quick fix. I've opened an upstream issue [3] to track
the code size, and try to avoid future regressions, and improve it in
the long term"
Link: https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/
Link: https://lkml.org/lkml/2021/11/15/710
Link: https://lkml.org/lkml/2021/11/14/189
Link: https://github.com/facebook/zstd/issues/2867
Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/
* tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux:
lib: zstd: Don't add -O3 to cflags
lib: zstd: Don't inline functions in zstd_opt.c
lib: zstd: Fix unused variable warning
Linus Torvalds [Thu, 18 Nov 2021 22:52:24 +0000 (14:52 -0800)]
Merge tag 'thermal-5.16-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the handling of thermal zones during system resume and
disable building of the int340x thermal driver on 32-bit.
Specifics:
- Prevent the previous high and low thermal zone trip values from
being retained over a system suspend-resume cycle (Manaf
Meethalavalappu Pallikunhi)
- Prevent the int340x thermal driver from being built in 32-bit
kernel configurations, because running it on 32-bit is questionable
(Arnd Bergmann)"
* tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Reset previous low and high trip during thermal zone init
thermal: int340x: Limit Kconfig to 64-bit
Linus Torvalds [Thu, 18 Nov 2021 22:46:28 +0000 (14:46 -0800)]
Merge tag 'pm-5.16-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a system-wide suspend issue in the DTPM framework and
improve the Energy Model documentation.
Specifics:
- Fix system suspend handling in DTPM when it is enabled, but not
actually used (Daniel Lezcano)
- Describe the new cpufreq callback for Energy Model registration and
explain the "advanced" and "simple" EM variants in the EM
documentation (Lukasz Luba)"
* tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: power: Describe 'advanced' and 'simple' EM models
Documentation: power: Add description about new callback for EM registration
powercap: DTPM: Fix suspend failure and kernel warning
Linus Torvalds [Thu, 18 Nov 2021 22:42:36 +0000 (14:42 -0800)]
Merge tag 'acpi-5.16-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert the change attempting to release PM resources blocked by unused
ACPI objects after device enumeration, because it caused boot issues
to appear on multiple systems"
* tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: scan: Release PM resources blocked by unused objects"
Linus Torvalds [Thu, 18 Nov 2021 22:39:40 +0000 (14:39 -0800)]
Merge tag 'platform-drivers-x86-v5.16-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various build- and bug-fixes as well as one hardware-id addition"
* tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard
platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep
platform/x86: thinkpad_acpi: Add support for dual fan control
platform/x86: think-lmi: Abort probe on analyze failure
platform/x86: dell-wmi-descriptor: disable by default
platform/x86: samsung-laptop: Fix typo in a comment
platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS
platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
Linus Torvalds [Thu, 18 Nov 2021 22:35:41 +0000 (14:35 -0800)]
Merge tag 'spi-fix-v5.16-rc1' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for v5.16, one in the core for an issue with
handling of controller unregistration that was introduced with the
fixes for registering nested SPI controllers and a few more minor
device specific ones"
* tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix use-after-free of the add_lock mutex
spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()
spi: lpspi: Silence error message upon deferred probe
spi: cadence-quadspi: fix write completion support
Nick Terrell [Tue, 16 Nov 2021 23:11:39 +0000 (15:11 -0800)]
lib: zstd: Don't add -O3 to cflags
After the update to zstd-1.4.10 passing -O3 is no longer necessary to
get good performance from zstd. Using the default optimization level -O2
is sufficient to get good performance.
I've measured no significant change to compression speed, and a ~1%
decompression speed loss, which is acceptable.
This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The
gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating
stacks that are ~3KB. With -O2 these same functions generate stacks in
the < 100B, completely fixing the problem. Function size deltas are
listed below:
ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68
ZSTD_compressBlock_fast: 2216 -> 40
ZSTD_compressBlock_fast_dictMatchState: 1848 -> 64
ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76
ZSTD_fillDoubleHashTable: 3252 -> 0
ZSTD_compressBlock_doubleFast: 5856 -> 36
ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84
ZSTD_copmressBlock_lazy2: 2420 -> 72
Additionally, this improves the reported code bloat [1]. With gcc-11
bloat-o-meter shows an 80KB code size improvement:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190)
Total: Before=6418562, After=6336372, chg -1.28%
```
Compared to before the zstd-1.4.10 update we see a total code size
regression of 105KB, down from 374KB at v5.16-rc1:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522)
Total: Before=6228850, After=6336372, chg +1.73%
```
[0] https://lkml.org/lkml/2021/11/15/710
[1] https://lkml.org/lkml/2021/11/14/189
Link: https://lore.kernel.org/r/20211117014949.1169186-4-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-4-nickrterrell@gmail.com/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Nick Terrell [Tue, 16 Nov 2021 04:33:08 +0000 (20:33 -0800)]
lib: zstd: Don't inline functions in zstd_opt.c
`zstd_opt.c` contains the match finder for the highest compression
levels. These levels are already very slow, and are unlikely to be used
in the kernel. If they are used, they shouldn't be used in latency
sensitive workloads, so slowing them down shouldn't be a big deal.
This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0].
I've also opened an issue upstream [1] so that we can properly tackle
the code size issue in `zstd_opt.c` for all users, and can hopefully
remove this hack in the next zstd version we import.
Bloat-o-meter output on x86-64:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266)
Function old new delta
ZSTD_compressBlock_opt_generic.constprop - 7559 +7559
ZSTD_insertBtAndGetAllMatches - 6304 +6304
ZSTD_insertBt1 - 1731 +1731
ZSTD_storeSeq - 693 +693
ZSTD_BtGetAllMatches - 255 +255
ZSTD_updateRep - 128 +128
ZSTD_updateTree 96 99 +3
ZSTD_insertAndFindFirstIndexHash3 81 - -81
ZSTD_setBasePrices.constprop 98 - -98
ZSTD_litLengthPrice.constprop 138 - -138
ZSTD_count 362 181 -181
ZSTD_count_2segments 1407 938 -469
ZSTD_insertBt1.constprop 2689 - -2689
ZSTD_compressBlock_btultra2 19990 423 -19567
ZSTD_compressBlock_btultra 19633 15 -19618
ZSTD_initStats_ultra 19825 - -19825
ZSTD_compressBlock_btopt 20374 12 -20362
ZSTD_compressBlock_btopt_extDict 29984 12 -29972
ZSTD_compressBlock_btultra_extDict 30718 15 -30703
ZSTD_compressBlock_btopt_dictMatchState 32689 12 -32677
ZSTD_compressBlock_btultra_dictMatchState 33574 15 -33559
Total: Before=6611828, After=6418562, chg -2.92%
```
[0] https://lkml.org/lkml/2021/11/14/189
[1] https://github.com/facebook/zstd/issues/2862
Link: https://lore.kernel.org/r/20211117014949.1169186-3-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-3-nickrterrell@gmail.com/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Nick Terrell [Tue, 16 Nov 2021 03:08:19 +0000 (19:08 -0800)]
lib: zstd: Fix unused variable warning
The variable `litLengthSum` is only used by an `assert()`, so when
asserts are disabled the compiler doesn't see any usage and warns.
This issue is already fixed upstream by PR #2838 [0]. It was reported
by the Kernel test robot in [1].
Another approach would be to change zstd's disabled `assert()`
definition to use the argument in a disabled branch, instead of
ignoring the argument. I've avoided this approach because there are
some small changes necessary to get zstd to build, and I would
want to thoroughly re-test for performance, since that is slightly
changing the code in every function in zstd. It seems like a
trivial change, but some functions are pretty sensitive to small
changes. However, I think it is a valid approach that I would
like to see upstream take, so I've opened Issue #2868 to attempt
this upstream.
Lastly, I've chosen not to use __maybe_unused because all code
in lib/zstd/ must eventually be upstreamed. Upstream zstd can't
use __maybe_unused because it isn't portable across all compilers.
[0] https://github.com/facebook/zstd/pull/2838
[1] https://lore.kernel.org/linux-mm/
202111120312.833wII4i-lkp@intel.com/T/
[2] https://github.com/facebook/zstd/issues/2868
Link: https://lore.kernel.org/r/20211117014949.1169186-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-2-nickrterrell@gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Linus Torvalds [Thu, 18 Nov 2021 20:54:24 +0000 (12:54 -0800)]
Merge tag 'net-5.16-rc2' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, mac80211.
Current release - regressions:
- devlink: don't throw an error if flash notification sent before
devlink visible
- page_pool: Revert "page_pool: disable dma mapping support...",
turns out there are active arches who need it
Current release - new code bugs:
- amt: cancel delayed_work synchronously in amt_fini()
Previous releases - regressions:
- xsk: fix crash on double free in buffer pool
- bpf: fix inner map state pruning regression causing program
rejections
- mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
preventing mis-selecting the best effort queue
- mac80211: do not access the IV when it was stripped
- mac80211: fix radiotap header generation, off-by-one
- nl80211: fix getting radio statistics in survey dump
- e100: fix device suspend/resume
Previous releases - always broken:
- tcp: fix uninitialized access in skb frags array for Rx 0cp
- bpf: fix toctou on read-only map's constant scalar tracking
- bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
progs
- tipc: only accept encrypted MSG_CRYPTO msgs
- smc: transfer remaining wait queue entries during fallback, fix
missing wake ups
- udp: validate checksum in udp_read_sock() (when sockmap is used)
- sched: act_mirred: drop dst for the direction from egress to
ingress
- virtio_net_hdr_to_skb: count transport header in UFO, prevent
allowing bad skbs into the stack
- nfc: reorder the logic in nfc_{un,}register_device, fix unregister
- ipsec: check return value of ipv6_skip_exthdr
- usb: r8152: add MAC passthrough support for more Lenovo Docks"
* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
ipv6: check return value of ipv6_skip_exthdr
e100: fix device suspend/resume
devlink: Don't throw an error if flash notification sent before devlink visible
page_pool: Revert "page_pool: disable dma mapping support..."
ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
octeontx2-af: debugfs: don't corrupt user memory
NFC: add NCI_UNREG flag to eliminate the race
NFC: reorder the logic in nfc_{un,}register_device
NFC: reorganize the functions in nci_request
tipc: check for null after calling kmemdup
i40e: Fix display error code in dmesg
i40e: Fix creation of first queue by omitting it if is not power of two
i40e: Fix warning message and call stack during rmmod i40e driver
i40e: Fix ping is lost after configuring ADq on VF
i40e: Fix changing previously set num_queue_pairs for PFs
i40e: Fix NULL ptr dereference on VSI filter sync
i40e: Fix correct max_pkt_size on VF RX queue
...
Linus Torvalds [Thu, 18 Nov 2021 20:41:14 +0000 (12:41 -0800)]
Merge tag 'for-5.16-rc1-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several xes and one old ioctl deprecation. Namely there's fix for
crashes/warnings with lzo compression that was suspected to be caused
by first pull merge resolution, but it was a different bug.
Summary:
- regression fix for a crash in lzo due to missing boundary checks of
the page array
- fix crashes on ARM64 due to missing barriers when synchronizing
status bits between work queues
- silence lockdep when reading chunk tree during mount
- fix false positive warning in integrity checker on devices with
disabled write caching
- fix signedness of bitfields in scrub
- start deprecation of balance v1 ioctl"
* tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: deprecate BTRFS_IOC_BALANCE ioctl
btrfs: make 1-bit bit-fields of scrub_page unsigned int
btrfs: check-integrity: fix a warning on write caching disabled disk
btrfs: silence lockdep when reading chunk tree during mount
btrfs: fix memory ordering between normal and ordered work functions
btrfs: fix a out-of-bound access in copy_compressed_data_to_page()
Linus Torvalds [Thu, 18 Nov 2021 20:31:29 +0000 (12:31 -0800)]
Merge tag 'fs_for_v5.16-rc2' of git://git./linux/kernel/git/jack/linux-fs
Pull UDF fix from Jan Kara:
"A fix for a long-standing UDF bug where we were not properly
validating directory position inside readdir"
* tag 'fs_for_v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix crash after seekdir
Linus Torvalds [Thu, 18 Nov 2021 20:17:33 +0000 (12:17 -0800)]
Merge tag 'fs.idmapped.v5.16-rc2' of git://git./linux/kernel/git/brauner/linux
Pull setattr idmapping fix from Christian Brauner:
"This contains a simple fix for setattr. When determining the validity
of the attributes the ia_{g,u}id fields contain the value that will be
written to inode->i_{g,u}id. When the {g,u}id attribute of the file
isn't altered and the caller's fs{g,u}id matches the current {g,u}id
attribute the attribute change is allowed.
The value in ia_{g,u}id does already account for idmapped mounts and
will have taken the relevant idmapping into account. So in order to
verify that the {g,u}id attribute isn't changed we simple need to
compare the ia_{g,u}id value against the inode's i_{g,u}id value.
This only has any meaning for idmapped mounts as idmapping helpers are
idempotent without them. And for idmapped mounts this really only has
a meaning when circular idmappings are used, i.e. mappings where e.g.
id 1000 is mapped to id 1001 and id 1001 is mapped to id 1000. Such
ciruclar mappings can e.g. be useful when sharing the same home
directory between multiple users at the same time.
Before this patch we could end up denying legitimate attribute changes
and allowing invalid attribute changes when circular mappings are
used. To even get into this situation the caller must've been
privileged both to create that mapping and to create that idmapped
mount.
This hasn't been seen in the wild anywhere but came up when expanding
the fstest suite during work on a series of hardening patches. All
idmapped fstests pass without any regressions and we're adding new
tests to verify the behavior of circular mappings.
The new tests can be found at [1]"
Link: https://lore.kernel.org/linux-fsdevel/20211109145713.1868404-2-brauner@kernel.org
* tag 'fs.idmapped.v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: handle circular mappings correctly
Linus Torvalds [Thu, 18 Nov 2021 20:13:24 +0000 (12:13 -0800)]
Merge tag 'for-5.16/parisc-4' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"parisc bug and warning fixes and wire up futex_waitv.
Fix some warnings which showed up with allmodconfig builds, a revert
of a change to the sigreturn trampoline which broke signal handling,
wire up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig"
* tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable CONFIG_PRINTK_TIME=y in 32bit defconfig
Revert "parisc: Reduce sigreturn trampoline to 3 instructions"
parisc: Wrap assembler related defines inside __ASSEMBLY__
parisc: Wire up futex_waitv
parisc: Include stringify.h to avoid build error in crypto/api.c
parisc/sticon: fix reverse colors
Linus Torvalds [Thu, 18 Nov 2021 20:05:22 +0000 (12:05 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Selftest changes:
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
x86 changes:
- Fixes for Xen emulation
- Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
- Fixes for migration of 32-bit nested guests on 64-bit hypervisor
- Compilation fixes
- More SEV cleanups
Generic:
- Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of
the two"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
KVM: x86: Assume a 64-bit hypercall for guests with protected state
selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
riscv: kvm: fix non-kernel-doc comment block
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
KVM: SEV: Drop a redundant setting of sev->asid during initialization
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
KVM: x86/xen: Use sizeof_field() instead of open-coding it
KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
...
Rafael J. Wysocki [Thu, 18 Nov 2021 19:40:28 +0000 (20:40 +0100)]
Merge branch 'thermal-int340x'
Merge int340x thermal driver Kconfig fix for 5.16-rc2.
* thermal-int340x:
thermal: int340x: Limit Kconfig to 64-bit
Rafael J. Wysocki [Thu, 18 Nov 2021 19:34:57 +0000 (20:34 +0100)]
Merge branch 'powercap'
Merge a Dynamic Thermal Power Management (DTPM) framework fix for
5.16-rc2.
* powercap:
powercap: DTPM: Fix suspend failure and kernel warning
Linus Torvalds [Thu, 18 Nov 2021 19:01:06 +0000 (11:01 -0800)]
Merge tag 'docs-5.16-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of documentation fixes for 5.16"
* tag 'docs-5.16-2' of git://git.lwn.net/linux:
Documentation/process: fix a cross reference
Documentation: update vcpu-requests.rst reference
docs: accounting: update delay-accounting.rst reference
libbpf: update index.rst reference
docs: filesystems: Fix grammatical error "with" to "which"
doc/zh_CN: fix a translation error in management-style
docs: ftrace: fix the wrong path of tracefs
Documentation: arm: marvell: Fix link to armada_1000_pb.pdf document
Documentation: arm: marvell: Put Armada XP section between Armada 370 and 375
Documentation: arm: marvell: Add some links to homepage / product infos
docs: Update Sphinx requirements
Kalesh Singh [Thu, 18 Nov 2021 01:15:42 +0000 (17:15 -0800)]
tracing/histogram: Fix UAF in destroy_hist_field()
Calling destroy_hist_field() on an expression will recursively free
any operands associated with the expression. If during expression
parsing the operands of the expression are already set when an error
is encountered, there is no need to explicity free the operands. Doing
so will result in destroy_hist_field() being called twice for the
operands and lead to a use-after-free (UAF) error.
If the operands are associated with the expression, only call
destroy_hist_field() on the expression since the operands will be
recursively freed.
Link: https://lore.kernel.org/all/CAHk-=wgcrEbFgkw9720H3tW-AhHOoEKhYwZinYJw4FpzSaJ6_Q@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211118011542.1420131-1-kaleshsingh@google.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Fixes:
8b5d46fd7a38 ("tracing/histogram: Optimize division by constants")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Thu, 18 Nov 2021 18:50:45 +0000 (10:50 -0800)]
Merge tag 'printk-for-5.16-fixup' of git://git./linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Try to flush backtraces from other CPUs also on the local one. This
was a regression caused by printk_safe buffers removal.
- Remove header dependency warning.
* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove printk.h inclusion in percpu.h
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
Heiko Carstens [Mon, 15 Nov 2021 19:56:14 +0000 (20:56 +0100)]
ftrace/samples: add s390 support for ftrace direct multi sample
Add s390 architecture support for the ftrace direct multi sample.
See commit
5fae941b9a6f ("ftrace/samples: Add multi direct interface
test module") for further details.
Link: https://lore.kernel.org/r/20211115195614.3173346-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Mon, 15 Nov 2021 19:56:13 +0000 (20:56 +0100)]
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
Currently it is not possible to build the ftrace direct multi example
anymore due to broken config dependencies. Fix this by adding
SAMPLE_FTRACE_DIRECT_MULTI config option.
This broke when merging s390-5.16-1 due to an incorrect merge conflict
resolution proposed by me.
Also rename SAMPLE_FTRACE_MULTI_DIRECT to SAMPLE_FTRACE_DIRECT_MULTI
so it matches the module name.
Fixes:
0b707e572a19 ("Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux")
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20211115195614.3173346-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Christian Borntraeger [Tue, 16 Nov 2021 13:58:03 +0000 (14:58 +0100)]
MAINTAINERS: update email address of Christian Borntraeger
My borntraeger@de.ibm.com email is just a forwarder to the
linux.ibm.com address. Let us remove the extra hop to avoid
a potential source of errors.
While at it, add the relevant email addresses to mailmap.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20211116135803.119489-2-borntraeger@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Baoquan He [Tue, 16 Nov 2021 03:31:01 +0000 (11:31 +0800)]
s390/kexec: fix memory leak of ipl report buffer
unreferenced object 0x38000195000 (size 4096):
comm "kexec", pid 8548, jiffies
4294953647 (age 32443.270s)
hex dump (first 32 bytes):
00 00 00 c8 20 00 00 00 00 00 00 c0 02 80 00 00 .... ...........
40 40 40 40 40 40 40 40 00 00 00 00 00 00 00 00 @@@@@@@@........
backtrace:
[<
0000000011a2f199>] __vmalloc_node_range+0xc0/0x140
[<
0000000081fa2752>] vzalloc+0x5a/0x70
[<
0000000063a4c92d>] ipl_report_finish+0x2c/0x180
[<
00000000553304da>] kexec_file_add_ipl_report+0xf4/0x150
[<
00000000862d033f>] kexec_file_add_components+0x124/0x160
[<
000000000d2717bb>] arch_kexec_kernel_image_load+0x62/0x90
[<
000000002e0373b6>] kimage_file_alloc_init+0x1aa/0x2e0
[<
0000000060f2d14f>] __do_sys_kexec_file_load+0x17c/0x2c0
[<
000000008c86fe5a>] __s390x_sys_kexec_file_load+0x40/0x50
[<
000000001fdb9dac>] __do_syscall+0x1bc/0x1f0
[<
000000003ee4258d>] system_call+0x78/0xa0
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Fixes:
99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Cc: <stable@vger.kernel.org> # v5.2: 20c76e242e70: s390/kexec: fix return code handling
Cc: <stable@vger.kernel.org> # v5.2
Link: https://lore.kernel.org/r/20211116033101.GD21646@MiWiFi-R3L-srv
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Tue, 16 Nov 2021 10:06:38 +0000 (11:06 +0100)]
s390/kexec: fix return code handling
kexec_file_add_ipl_report ignores that ipl_report_finish may fail and
can return an error pointer instead of a valid pointer.
Fix this and simplify by returning NULL in case of an error and let
the only caller handle this case.
Fixes:
99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Egorenkov [Mon, 15 Nov 2021 06:40:25 +0000 (07:40 +0100)]
s390/dump: fix copying to user-space of swapped kdump oldmem
This commit fixes a bug introduced by commit
e9e7870f90e3 ("s390/dump:
introduce boot data 'oldmem_data'").
OLDMEM_BASE was mistakenly replaced by oldmem_data.size instead of
oldmem_data.start.
This bug caused the following error during kdump:
kdump.sh[878]: No program header covering vaddr 0x3434f5245found kexec bug?
Fixes:
e9e7870f90e3 ("s390/dump: introduce boot data 'oldmem_data'")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Ian Rogers [Thu, 18 Nov 2021 08:47:49 +0000 (00:47 -0800)]
perf evsel: Fix memory leaks relating to unit
unit may have a strdup pointer or be to a literal, consequently memory
assocciated with it isn't freed. Change it so the unit is always strdup
and so the memory can be safely freed.
Fix related issue in perf_event__process_event_update() for name and
own_cpus. Leaks were spotted by leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118084749.2191447-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 18 Nov 2021 07:38:04 +0000 (23:38 -0800)]
perf report: Fix memory leaks around perf_tip()
perf_tip() may allocate memory or use a literal, this means memory
wasn't freed if allocated. Change the API so that literals aren't used.
At the same time add missing frees for system_path. These issues were
spotted using leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118073804.2149974-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 18 Nov 2021 07:12:47 +0000 (23:12 -0800)]
perf hist: Fix memory leak of a perf_hpp_fmt
perf_hpp__column_unregister() removes an entry from a list but doesn't
free the memory causing a memory leak spotted by leak sanitizer.
Add the free while at the same time reducing the scope of the function
to static.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118071247.2140392-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 8 Sep 2021 19:09:08 +0000 (16:09 -0300)]
tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall
To pick the changes in these csets:
b3ff2881ba18b852 ("MIPS: syscalls: Wire up futex_waitv syscall")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible (adapted from the x86_64 test output):
# perf trace -e futex_waitv
^C#
# perf trace -v -e futex_waitv
event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
^C#
# perf trace -v -e futex* --max-events 10
event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 202 || id == 449)
mmap size 528384B
? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out)
0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0
0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep futex_waitv tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl
449 n64 futex_waitv sys_futex_waitv
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Wang Haojun <jiangliuer01@gmail.com>
Link: https://lore.kernel.org/lkml/YZZRxuIyvSGLZhM4@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 17 Nov 2021 17:29:31 +0000 (14:29 -0300)]
tools build: Fix removal of feature-sync-compare-and-swap feature detection
The patch removing the feature-sync-compare-and-swap feature detection
didn't remove the call to main_test_sync_compare_and_swap(), making the
'test-all' case fail an all the feature tests to be performed
individually:
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
test-all.c: In function ‘main’:
test-all.c:203:9: error: implicit declaration of function ‘main_test_sync_compare_and_swap’ [-Werror=implicit-function-declaration]
203 | main_test_sync_compare_and_swap(argc, argv);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
Fix it, now to figure out what is that test-libpython-version.c
problem...
Fixes:
60fa754b2a5a4e0c ("tools: Remove feature-sync-compare-and-swap feature detection")
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YZU9Fe0sgkHSXeC2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Fri, 5 Nov 2021 10:41:30 +0000 (10:41 +0000)]
perf inject: Fix ARM SPE handling
'perf inject' is currently not working for Arm SPE. When you try to run
'perf inject' and 'perf report' with a perf.data file that contains SPE
traces, the tool reports a "Bad address" error:
# ./perf record -e arm_spe_0/ts_enable=1,store_filter=1,branch_filter=1,load_filter=1/ -a -- sleep 1
# ./perf inject -i perf.data -o perf.inject.data --itrace
# ./perf report -i perf.inject.data --stdio
0x42c00 [0x8]: failed to process type: 9 [Bad address]
Error:
failed to process sample
As far as I know, the issue was first spotted in [1], but 'perf inject'
was not yet injecting the samples. This patch does something similar to
what cs_etm does for injecting the samples [2], but for SPE.
[1] https://patchwork.kernel.org/project/linux-arm-kernel/cover/
20210412091006.468557-1-leo.yan@linaro.org/#
24117339
[2] https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/cs-etm.c?h=perf/core&id=
133fe2e617e48ca0948983329f43877064ffda3e#n1196
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211105104130.28186-2-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sohaib Mohamed [Wed, 10 Nov 2021 02:20:11 +0000 (04:20 +0200)]
perf bench: Fix two memory leaks detected with ASan
ASan reports memory leaks while running:
$ perf bench sched all
Fixes:
e27454cc6352c422 ("perf bench: Add sched-messaging.c: Benchmark for scheduler and IPC mechanisms based on hackbench")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Russel <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Link: http://lore.kernel.org/lkml/20211110022012.16620-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Wed, 17 Nov 2021 08:26:09 +0000 (09:26 +0100)]
perf test sample-parsing: Fix branch_stack entry endianness check
Commit
10269a2ca2b08cbd ("perf test sample-parsing: Add endian test for
struct branch_flags") broke the test case 27 (Sample parsing) on s390 on
linux-next tree:
# perf test -Fv 27
27: Sample parsing
--- start ---
parsing failed for sample_type 0x800
---- end ----
Sample parsing: FAILED!
#
The cause of the failure is a wrong #define BS_EXPECTED_BE statement in
above commit. Correct this define and the test case runs fine.
Output After:
# perf test -Fv 27
27: Sample parsing :
--- start ---
---- end ----
Sample parsing: Ok
#
Fixes:
10269a2ca2b08c ("perf test sample-parsing: Add endian test for struct branch_flags")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
CC: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/54077e81-503e-3405-6cb0-6541eb5532cc@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 10 Sep 2021 14:46:54 +0000 (11:46 -0300)]
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
To pick the changes in:
828ca89628bfcb1b ("KVM: x86: Expose TSC offset controls to userspace")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 5 Nov 2021 22:56:17 +0000 (15:56 -0700)]
perf sort: Fix the 'p_stage_cyc' sort key behavior
andle 'p_stage_cyc' (for pipeline stage cycles) sort key with the same
rationale as for the 'weight' and 'local_weight', see the fix in this
series for a full explanation.
Not sure it also needs the local and global variants.
But I couldn't test it actually because I don't have the machine.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 5 Nov 2021 22:56:16 +0000 (15:56 -0700)]
perf sort: Fix the 'ins_lat' sort key behavior
Handle 'ins_lat' (for instruction latency) and 'local_ins_lat' sort keys
with the same rationale as for the 'weight' and 'local_weight', see the
previous fix in this series for a full explanation.
But I couldn't test it actually, so only build tested.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 5 Nov 2021 22:56:15 +0000 (15:56 -0700)]
perf sort: Fix the 'weight' sort key behavior
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses. And perf tool has 'weight'
and 'local_weight' sort keys to display the info.
But it's somewhat confusing what it shows exactly. In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.
For example:
$ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M
$ perf report --stdio -n -s +local_weight
...
#
# Overhead Samples Command Shared Object Symbol Local Weight
# ........ ....... ....... ................ ......................... ............
#
21.23% 313 dd [kernel.vmlinux] [k] lockref_get_not_zero 32
12.43% 183 dd [kernel.vmlinux] [k] lockref_get_not_zero 35
11.97% 159 dd [kernel.vmlinux] [k] lockref_get_not_zero 36
10.40% 141 dd [kernel.vmlinux] [k] lockref_put_return 32
7.63% 113 dd [kernel.vmlinux] [k] lockref_get_not_zero 33
6.37% 92 dd [kernel.vmlinux] [k] lockref_get_not_zero 34
6.15% 90 dd [kernel.vmlinux] [k] lockref_put_return 33
...
So let's look at the 'lockref_get_not_zero' symbols. The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016. But it's not the case:
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ ......
#
1.36% 4 dd [kernel.vmlinux] 36 144
0.47% 4 dd [kernel.vmlinux] 37 148
0.42% 4 dd [kernel.vmlinux] 32 128
0.40% 4 dd [kernel.vmlinux] 34 136
0.35% 4 dd [kernel.vmlinux] 36 144
0.34% 4 dd [kernel.vmlinux] 35 140
0.30% 4 dd [kernel.vmlinux] 36 144
0.30% 4 dd [kernel.vmlinux] 34 136
0.30% 4 dd [kernel.vmlinux] 32 128
0.30% 4 dd [kernel.vmlinux] 32 128
...
With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is
what we want.
I found this because of the way it aggregates the 'weight' value. Since
it's not a period, we should not add them in the he->stat. Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.
After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.
Let's keep the weight and display it differently. For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.
With this change, I can see the expected numbers.
$ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
...
#
# Overhead Samples Command Shared Object Local Weight Weight
# ........ ....... ....... ................ ............ .....
#
21.23% 313 dd [kernel.vmlinux] 32 10016
12.43% 183 dd [kernel.vmlinux] 35 6405
11.97% 159 dd [kernel.vmlinux] 36 5724
7.63% 113 dd [kernel.vmlinux] 33 3729
6.37% 92 dd [kernel.vmlinux] 34 3128
4.17% 59 dd [kernel.vmlinux] 37 2183
0.08% 1 dd [kernel.vmlinux] 269 269
0.08% 1 dd [kernel.vmlinux] 38 38
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 16 Nov 2021 17:44:17 +0000 (14:44 -0300)]
perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1
As it is being used in tools/perf/arch/arm64/util/arm-spe.c and the
COMPAT_NEED_REALLOCARRAY was only being set when CORESIGHT=1 is set.
Fixes:
56c31cdff7c2a640 ("perf arm-spe: Implement find_snapshot callback")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/YZT63mIc7iY01er3@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 16 Nov 2021 16:02:52 +0000 (13:02 -0300)]
perf tests wp: Remove unused functions on s390
Fixing these build problems:
tests/wp.c:24:12: error: 'wp_read' defined but not used [-Werror=unused-function]
static int wp_read(int fd, long long *count, int size)
^
tests/wp.c:35:13: error: 'get__perf_event_attr' defined but not used [-Werror=unused-function]
static void get__perf_event_attr(struct perf_event_attr *attr, int wp_type,
^
CC /tmp/build/perf/util/print_binary.o
Fixes:
e47c6ecaae1df54a ("perf test: Convert watch point tests to test cases.")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 12:39:02 +0000 (09:39 -0300)]
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
b56639318bb2be66 ("KVM: SEV: Add support for SEV intra host migration")
e615e355894e6197 ("KVM: x86: On emulation failure, convey the exit reason, etc. to userspace")
a9d496d8e08ca1eb ("KVM: x86: Clarify the kvm_run.emulation_failure structure layout")
c68dc1b577eabd56 ("KVM: x86: Report host tsc and realtime values in KVM_GET_CLOCK")
dea8ee31a0392775 ("RISC-V: KVM: Add SBI v0.1 support")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: David Edmondson <david.edmondson@oracle.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Gonda <pgonda@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:39:15 +0000 (13:39 -0300)]
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
eec2113eabd92b7b ("x86/fpu/amx: Define AMX state components and have it used for boot-time checks")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dan Carpenter [Thu, 18 Nov 2021 11:22:11 +0000 (14:22 +0300)]
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
The ptp_ocp_get_mem() function does not return NULL, it returns error
pointers.
Fixes:
773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Teng Qi [Thu, 18 Nov 2021 07:01:18 +0000 (15:01 +0800)]
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
The definition of macro MOTO_SROM_BUG is:
#define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32(
dev->dev_addr) & 0x00ffffff) == 0x3e0008)
and the if statement
if (MOTO_SROM_BUG) lp->active = 0;
using this macro indicates lp->active could be 8. If lp->active is 8 and
the second comparison of this macro is false. lp->active will remain 8 in:
lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].mci = *p;
However, the length of array lp->phy is 8, so array overflows can occur.
To fix these possible array overflows, we first check lp->active and then
return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8).
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
zhangyue [Thu, 18 Nov 2021 05:46:32 +0000 (13:46 +0800)]
net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the
'for' end, the 'k' is 8.
At this time, the array 'lp->phy[8]' may be out of bound.
Signed-off-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 18 Nov 2021 11:48:33 +0000 (11:48 +0000)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-
queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-11-17
This series contains updates to i40e driver only.
Eryk adds accounting for VLAN header in packet size when VF port VLAN is
configured. He also fixes TC queue distribution when the user has changed
queue counts as well as for configuration of VF ADQ which caused dropped
packets.
Michal adds tracking for when a VSI is being released to prevent null
pointer dereference when managing filters.
Karen ensures PF successfully initiates VF requested reset which could
cause a call trace otherwise.
Jedrzej moves validation of channel queue value earlier to prevent
partial configuration when the value is invalid.
Grzegorz corrects the reported error when adding filter fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jordy Zomer [Wed, 17 Nov 2021 19:06:48 +0000 (20:06 +0100)]
ipv6: check return value of ipv6_skip_exthdr
The offset value is used in pointer math on skb->data.
Since ipv6_skip_exthdr may return -1 the pointer to uh and th
may not point to the actual udp and tcp headers and potentially
overwrite other stuff. This is why I think this should be checked.
EDIT: added {}'s, thanks Kees
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Wed, 17 Nov 2021 20:59:52 +0000 (12:59 -0800)]
e100: fix device suspend/resume
As reported in [1], e100 was no longer working for suspend/resume
cycles. The previous commit mentioned in the fixes appears to have
broken things and this attempts to practice best known methods for
device power management and keep wake-up working while allowing
suspend/resume to work. To do this, I reorder a little bit of code
and fix the resume path to make sure the device is enabled.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214933
Fixes:
69a74aef8a18 ("e100: use generic power management")
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reported-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Wed, 17 Nov 2021 14:49:09 +0000 (16:49 +0200)]
devlink: Don't throw an error if flash notification sent before devlink visible
The mlxsw driver calls to various devlink flash routines even before
users can get any access to the devlink instance itself. For example,
mlxsw_core_fw_rev_validate() one of such functions.
__mlxsw_core_bus_device_register
-> mlxsw_core_fw_rev_validate
-> mlxsw_core_fw_flash
-> mlxfw_firmware_flash
-> mlxfw_status_notify
-> devlink_flash_update_status_notify
-> __devlink_flash_update_notify
-> WARN_ON(...)
It causes to the WARN_ON to trigger warning about devlink not registered.
Fixes:
cf530217408e ("devlink: Notify users when objects are accessible")
Reported-by: Danielle Ratson <danieller@nvidia.com>
Tested-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 17 Nov 2021 07:56:52 +0000 (15:56 +0800)]
page_pool: Revert "page_pool: disable dma mapping support..."
This reverts commit
d00e60ee54b12de945b8493cf18c1ada9e422514.
As reported by Guillaume in [1]:
Enabling LPAE always enables CONFIG_ARCH_DMA_ADDR_T_64BIT
in 32-bit systems, which breaks the bootup proceess when a
ethernet driver is using page pool with PP_FLAG_DMA_MAP flag.
As we were hoping we had no active consumers for such system
when we removed the dma mapping support, and LPAE seems like
a common feature for 32 bits system, so revert it.
1. https://www.spinics.net/lists/netdev/msg779890.html
Fixes:
d00e60ee54b1 ("page_pool: disable dma mapping support for 32-bit arch with 64-bit DMA")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: "kernelci.org bot" <bot@kernelci.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-starfive.git / log