Joonsoo Kim [Tue, 16 Jul 2013 01:03:34 +0000 (10:03 +0900)]
Revert "tools lib lk: Fix for cross build"
This reverts commit
079787f209416416383c74ea5d5044be2d586f5e.
Below commit already resolve a cross build problem.
I have been noticed this too lately.
commit
3c4797d46c14fa0c7cf733a77bd4b28875078b53
Author: Rabin Vincent <rabin@rab.in>
Date: Fri May 17 22:27:44 2013 +0200
tools lib lk: Respect CROSS_COMPILE
Make lk use CROSS_COMPILE, in order to be able to cross compile perf
again.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1373936614-22224-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jason Wessel [Mon, 15 Jul 2013 20:27:53 +0000 (15:27 -0500)]
perf machine: Do not require /lib/modules/* on a guest
For some types of work loads and special guest environments, you might
have a kernel that has no kernel modules. The perf kvm record tool
fails instantiate vmlinux maps when the kernel modules directory cannot
be opened, even though the kallsyms has been properly processed. This
leads to a perf kvm report that has no guest symbols resolved.
This patch changes the failure to locate kernel modules to be non-fatal.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373920073-4874-1-git-send-email-jason.wessel@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Ellerman [Tue, 6 Aug 2013 13:28:06 +0000 (23:28 +1000)]
perf tests: Add tests of new pinned modifier
Add a negative test to test__checkevent_pmu_events() to get lots of
coverage of the negative case, ie. when the modifier is not specified.
Add a test of a single event, and of the group case.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-2-git-send-email-michael@ellerman.id.au
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Ellerman [Tue, 6 Aug 2013 13:28:05 +0000 (23:28 +1000)]
perf tools: Add support for pinned modifier
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 6 Aug 2013 05:14:13 +0000 (14:14 +0900)]
perf ui/gtk: Fix segmentation fault on perf_hpp__for_each_format loop
The commit
2b8bfa6bb8a7 ("perf tools: Centralize default columns init in
perf_hpp__init") moves initialization of common overhead column to
perf_hpp__init() but forgot about the gtk code.
So the gtk code added the same column to the list twice causing infinite
loop when iterating it by perf_hpp__for_each_format loop. When I run
perf report --gtk, I can see following messages indefinitely.
(perf:11687): Gtk-CRITICAL **: IA__gtk_main_quit: assertion 'main_loops != NULL' failed
perf: Segmentation fault
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375766056-19377-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 6 Aug 2013 01:41:37 +0000 (21:41 -0400)]
perf kvm stat report: Add option to analyze specific VM
Add an option to analyze a specific VM within a data file. This allows
the collection of kvm events for all VMs and then analyze data for each
VM (or set of VMs) individually.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-6-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 6 Aug 2013 01:41:35 +0000 (21:41 -0400)]
perf kvm: Add min and max stats to display
Add max and min times for exit events.
v2: address Xiao's comment to use get_event function for pulling max and
min from stats struct similar to mean and count
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 6 Aug 2013 01:41:34 +0000 (21:41 -0400)]
perf kvm: Add live mode
perf kvm stat currently requires back to back record and report commands
to see stats. e.g,.
perf kvm stat record -p $pid -- sleep 1
perf kvm stat report
This is inconvenvient for on box monitoring of a VM. This patch
introduces a 'live' mode that in effect combines the record plus report
into one command. e.g., to monitor a single VM:
perf kvm stat live -p $pid
or all VMs:
perf kvm stat live
Same stats options for the record+report path work with the live mode.
Display rate defaults to 1 second and can be changed using the -d
option.
v4:
- address comments from Xiao -- verify_vcpu check should not look at
processors on line for the host, prune configurable options.
- set attr->{mmap,comm,task} to 0 - don't need task events so trim events
we have to deal with
- better control of time for queue event flushing to reduce frequency of
"Timestamp below last timeslice flush" failures.
v3:
updated to use existing tracepoint parsing code
v2:
removed ABSTIME arg from timerfd_settime as mentioned by Namhyung
only call perf_kvm__handle_stdin when poll returns activity.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 6 Aug 2013 01:41:33 +0000 (21:41 -0400)]
perf session: Export queue_event function
Taking a lesson from perf-trace and bringing in control of event
processing to perf-kvm-stat-live: parse the sample to get access the
time leaving just the need to queue it to the ordered samples list. For
that the queue_event function needs to be exported.
Unexport perf_session__process_event.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Fri, 2 Aug 2013 11:10:50 +0000 (13:10 +0200)]
perf annotate browser: Fix typo
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20130802111050.GA29126@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 7 Aug 2013 18:55:48 +0000 (15:55 -0300)]
perf annotate browser: Improve description of '?' hotkey
The previous description: "Search previous string" is usually associated
with the 'N' following a '/string', the opposite of 'n', which is
'Search next string' in the direction established with '/' or '?'.
So change it to 'Search string backwards', to clarify that.
The 'N' hotkey remains to be implemented with the semantic described
above.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5lw5y15d7vv308xbpm8pqe4g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:57 +0000 (14:38 +0300)]
perf annotate: Add call target name if it is missing
The /proc/kcore file has no symbols, so the call target name does not
display. Fix by looking up the symbol name if it is on the same map.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:56 +0000 (14:38 +0300)]
perf annotate: Remove nop at end of annotation
When kcore is used for annotation, symbols do not have correct sizes
because they come from kallsyms, that has only its start address, with
the end address being the next symbol's minus one.
That sometimes results in an extra nop being seen after the end of a
function. Remove it.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:55 +0000 (14:38 +0300)]
perf annotate: Put dso name in symbol annotation title
Currently the symbol name is displayed at the top when displaying symbol
annotation. Add to this the dso long name.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:54 +0000 (14:38 +0300)]
perf annotate: Allow disassembly using /proc/kcore
Annotation with /proc/kcore is possible so the logic is adjusted to
allow it. The main difference is that /proc/kcore had no symbols so the
parsing logic needed a tweak to read jump offsets.
The other difference is that objdump cannot always read from kcore.
That seems to be a bug with objdump.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:53 +0000 (14:38 +0300)]
perf tests: Add kcore to the object code reading test
Make the "object code reading" test attempt to read from kcore.
The test uses objdump which struggles with kcore. i.e. doesn't always
work, sometimes takes a long time. The test has been made to work
around those issues.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:52 +0000 (14:38 +0300)]
perf tests: Adjust the vmlinux symtab matches kallsyms test again
The kallsyms maps now may map to kcore and the symbol values now may be
file offsets. For comparison with vmlinux the virtual memory address is
needed which is obtained by unmapping the symbol value.
The "vmlinux symtab matches kallsyms" is adjusted accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:51 +0000 (14:38 +0300)]
perf symbols: Add support for reading from /proc/kcore
In the absence of vmlinux, perf tools uses kallsyms for symbols. If the
user has access, now also map to /proc/kcore.
The dso data_type is now set to either DSO_BINARY_TYPE__KCORE or
DSO_BINARY_TYPE__GUEST_KCORE as approprite.
This patch breaks the "vmlinux symtab matches kallsyms" test. That is
fixed in a following patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:50 +0000 (14:38 +0300)]
perf tools: Make it possible to read object code from kernel modules
The new "object code reading" test shows that it is not possible to read
object code from kernel modules. That is because the mappings do not
map to the dsos. This patch fixes that.
This involves identifying and flagging relocatable (ELF type ET_REL)
files (e.g. kernel modules) for symbol adjustment and updating
map__rip_2objdump() accordingly. The kmodule parameter of
dso__load_sym() is taken into use and the module map altered to map to
the dso.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:48 +0000 (14:38 +0300)]
perf tests: Adjust the vmlinux symtab matches kallsyms test
The vmlinux maps now map to the dso and the symbol values are now file
offsets. For comparison with kallsyms the virtual memory address is
needed which is obtained by unmapping the symbol value.
The "vmlinux symtab matches kallsyms" is adjusted accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:47 +0000 (14:38 +0300)]
perf tools: Make it possible to read object code from vmlinux
The new "object code reading" test shows that it is not possible to read
object code from vmlinux. That is because the mappings do not map to
the dso. This patch fixes that.
A side-effect of changing the kernel map is that the "reloc" offset must
be taken into account. As a result of that separate map functions for
relocation are no longer needed.
Also fixing up the maps to match the symbols no longer makes sense and
so is not done.
The vmlinux dso data_type is now set to either DSO_BINARY_TYPE__VMLINUX
or DSO_BINARY_TYPE__GUEST_VMLINUX as approprite, which enables the
correct file name to be determined by dso__binary_type_file().
This patch breaks the "vmlinux symtab matches kallsyms" test. That is
fixed in a following patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:46 +0000 (14:38 +0300)]
perf symbols: Load kernel maps before using
In order to use kernel maps to read object code, those maps must be
adjusted to map to the dso file offset. Because lazy-initialization is
used, that is not done until symbols are loaded. However the maps are
first used by thread__find_addr_map() before symbols are loaded. So
this patch changes thread__find_addr() to "load" kernel maps before
using them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:45 +0000 (14:38 +0300)]
perf tests: Add test for reading object code
Using the information in mmap events, perf tools can read object code
associated with sampled addresses. A test is added that compares bytes
read by perf with the same bytes read using objdump.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 7 Aug 2013 11:38:49 +0000 (14:38 +0300)]
perf symbols: avoid SyS kernel syscall aliases
When removing duplicate symbols, prefer to remove syscall aliases
starting with SyS or compat_SyS.
A side-effect of that is that it results in slightly improved results
for the "vmlinux symtab matches kallsyms" test.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Sat, 3 Aug 2013 00:41:12 +0000 (17:41 -0700)]
perf stat: Flush output after each line in interval mode
When interval mode is outputting to a pipe, each measurement should be
flushed individually, so that the reader sees it timely.
With a terminal each line is automatically flushed by stdio, but that is
disabled with non terminal output.
Simply fflush output after each time interval
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Sat, 3 Aug 2013 00:41:11 +0000 (17:41 -0700)]
perf stat: Add support for --initial-delay option
When measuring workloads the startup phase -- doing page faults, dynamic
linking, opening files -- is often very different from the rest of the
workload. Especially with smaller kernels and using counter
multiplexing this can give significant measurement errors.
Multiplexing assumes that the workload is mostly the same over longer
periods. But at startup there is typically some spike of activity which
is relatively short. If many groups are multiplexing the one group
seeing the spike, and which is then scaled up over the time to run all
groups, may see a significant error.
Also in general it's often not useful to measure the startup, because it
is so different from the rest.
One way around this is to use interval mode and discard the first
sample, but this can be awkward because interval mode doesn't support
intervals of less than 100ms, and also a useful interval is not
necessarily the same as a useful startup delay.
This patch adds a new --initial-delay / -D option to skip measuring for
the startup phase. The time can be specified in ms
Here's a simple example:
perf stat -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
3,721 page-faults
...
If we just wait 20 ms the number of page faults is 1/3 less:
perf stat -D 20 -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
2,823 page-faults
...
So we filtered out most of the startup noise from bash.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Sat, 3 Aug 2013 00:41:10 +0000 (17:41 -0700)]
perf evsel: Add support for enabling counters
Add support for enabling already set up counters by using an
ioctl. I share some code with the filter setup.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-3-git-send-email-andi@firstfloor.org
[ Fixed up 'err' variable indentation ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Sat, 3 Aug 2013 00:41:09 +0000 (17:41 -0700)]
perf evlist: Remove obsolete dummy execve
Minor cleanup.
The dummy execve to pre-resolve the PLT is obsolete since
"enable_on_execve" was added. The counters are only
running after the execve anyways. So just remove it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Fri, 2 Aug 2013 20:05:42 +0000 (14:05 -0600)]
perf kvm: Split out tracepoints from record args
Needed by kvm live command. Make record_args a local while we are
messing with the args.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Fri, 2 Aug 2013 20:05:41 +0000 (14:05 -0600)]
perf session: Export a few functions for event processing
Allows kvm live mode to reuse the event processing and ordered samples
processing used by the perf-report path.
v2: removed flush_sample_queue as noticed by Jiri
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Fri, 2 Aug 2013 20:05:40 +0000 (14:05 -0600)]
perf stats: Add max and min stats
Need an initialization function to set min to -1 to
differentiate from an actual min of 0.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Fri, 2 Aug 2013 20:05:39 +0000 (14:05 -0600)]
perf top: move CONSOLE_CLEAR to header file
For use with kvm-live mode.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 4 Jun 2013 01:50:29 +0000 (10:50 +0900)]
perf util: Add parse_nsec_time() function
The parse_nsec_time() function is for parsing a string of time into
64-bit nsec value. It's a preparation of time filtering in some of perf
commands.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1370310629-9642-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Aug 2013 20:00:45 +0000 (17:00 -0300)]
perf python: Remove duplicate TID bit from mask
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thiago Peixoto <thiagolcpeixoto@gmail.com>
Link: http://lkml.kernel.org/n/tip-jurgz6myq125o1ql6lldh6f7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 30 Jul 2013 19:38:23 +0000 (16:38 -0300)]
perf trace: Beautify 'connect' result
It is an errno, so print an error string.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zt68gijvvoe8gd7kmclo43si@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Fri, 26 Jul 2013 14:27:23 +0000 (08:27 -0600)]
perf tools: Fix compile of util/tsc.c
On Fedora 18, with gcc 4.6.4 compile fails with:
arch/x86/util/tsc.c: In function ‘perf_time_to_tsc’:
arch/x86/util/tsc.c:13:6: error: declaration of ‘time’ shadows a global declaration [-Werror=shadow]
cc1: all warnings being treated as errors
make: *** [/tmp/junk/arch/x86/util/tsc.o] Error 1
make: *** Waiting for unfinished jobs....
Fix by renaming the local variable.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/1374848843-43127-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sun, 28 Jul 2013 15:14:34 +0000 (09:14 -0600)]
perf evsel: Actually show symbol offset in stack trace when requested
Symbol offset is one of the fields that can be requested in perf-script.
Currently you do not get that data when requested. e.g.,
perf script -f comm,tid,pid,time,cpu,sym,symoff,ip
...
gcc 6201/6201 [006] 762250.617897:
ffffffff81090d95 update_curr
ffffffff810911b8 dequeue_entity
ffffffff81091825 dequeue_task_fair
ffffffff81087163 dequeue_task
ffffffff81087c03 deactivate_task
...
With this patch you get the offset:
...
gcc 6201/6201 [006] 762250.617897:
ffffffff81090d95 update_curr+0x1c5
ffffffff810911b8 dequeue_entity+0x28
ffffffff81091825 dequeue_task_fair+0x45
ffffffff81087163 dequeue_task+0x93
ffffffff81087c03 deactivate_task+0x23
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1375024474-45726-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 1 Feb 2013 19:37:11 +0000 (20:37 +0100)]
perf tests: Add parse events tests for leader sampling
Adding 2 more tests to the automated parse events suite for following
event config:
'{cycles,cache-misses,branch-misses}:S'
'{instructions,branch-misses}:Su'
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-tmcy0ir7i8id2t54qg5ifbio@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 1 Feb 2013 18:33:31 +0000 (19:33 +0100)]
perf tests: Add attr record group sampling test
Adding test to validate perf_event_attr data for command:
'record -e '{cycles,cache-misses}:S'
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-9eppxvhkly6gse5ximudckrp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 10 Oct 2012 15:39:03 +0000 (17:39 +0200)]
perf tools: Add 'S' event/group modifier to read sample value
Adding 'S' event/group modifier to specify that the event value/s are
read by PERF_SAMPLE_READ sample type processing, instead of the period
value offered by lower layers.
There's additional behaviour change for 'S' modifier being specified on
event group:
Currently all the events within a group makes samples. If user now
specifies 'S' within group modifier, only the leader will trigger
samples. The rest of events in the group will have sampling disabled.
And same as for single events, values of all events within the group
(including leader) are read by PERF_SAMPLE_READ sample type processing.
Following example will create event group with cycles and cache-misses
events, setting the cycles as group leader and the only event to
actually sample. Both cycles and cache-misses event period values are
read by PERF_SAMPLE_READ sample type processing with PERF_FORMAT_GROUP
read format.
Example:
$ perf record -e '{cycles,cache-misses}:S' ls
...
$ perf report --group --show-total-period --stdio
...
# Samples: 36 of event 'anon group { cycles, cache-misses }'
# Event count (approx.):
12585593
#
# Overhead Period Command Shared Object Symbol
# .............. .............. ....... ................. ..........................
#
19.92% 1.20% 2505936 31 ls [kernel.kallsyms] [k] mark_held_locks
13.74% 0.47% 1729327 12 ls [kernel.kallsyms] [k] sched_clock_local
13.64% 23.72% 1716147 612 ls ld-2.14.90.so [.] check_match.10805
13.12% 23.22% 1650778 599 ls libc-2.14.90.so [.] _nl_intern_locale_data
11.24% 29.19% 1414554 753 ls [kernel.kallsyms] [k] sched_clock_cpu
8.50% 0.35% 1070150 9 ls [kernel.kallsyms] [k] check_chain_key
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-iyoinu3axi11mymwnh2b7fxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 10 Oct 2012 16:52:24 +0000 (18:52 +0200)]
perf evsel: Add PERF_SAMPLE_READ sample related processing
For sample with sample type PERF_SAMPLE_READ the period value is stored
in the 'struct sample_read'.
Moreover if the read format has PERF_FORMAT_GROUP, the 'struct
sample_read' contains period values for all events in the group (for
which the sample's event is a leader).
We deliver separated samples for all the values contained within the
'struct sample_read'.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-6mdm5xkrm6kypouh1c33cyys@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 11 Oct 2012 12:10:35 +0000 (14:10 +0200)]
perf evlist: Add perf_evlist__id2sid method to get event ID related data
This will be helpful for PERF_FORMAT_GROUP samples where we need to
store ID related period value for each event.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-twmlgsbyim97p7cyohjwb1df@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 12 Oct 2012 11:02:21 +0000 (13:02 +0200)]
perf evlist: Fix event ID retrieval for group format read case
We need to fail the event ID retrieval in case both following conditions
are true:
- we are on kernel with no PERF_EVENT_IOC_ID support
- PERF_FORMAT_GROUP read format is set
The PERF_FORMAT_GROUP read format bit is the killer for retrieving event
ID out of the read syscall, because we have no guarantee of the event
placement within leader kernel sibling list.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-e93pgyj20rqx48qzw10vj4r4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 10 Oct 2012 15:38:13 +0000 (17:38 +0200)]
perf tools: Add support for parsing PERF_SAMPLE_READ sample type
Adding support to parse out the PERF_SAMPLE_READ sample bits. The code
contains both single and group format specification.
This code parse out and prepare PERF_SAMPLE_READ data into the
perf_sample struct. It will be used for group leader sampling feature
comming in shortly.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-0tgdoln5rwk3wocshb442cl3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 4 Apr 2012 17:32:27 +0000 (19:32 +0200)]
perf evlist: Use PERF_EVENT_IOC_ID perf ioctl to read event id
Changing the way we retrieve the event ID. Instead of parsing out
the ID out of the read data, using the PERF_EVENT_IOC_ID ioctl.
Keeping the old way in place to support kernels without
PERF_EVENT_IOC_ID ioctl support.
This will be useful for retrieving the event ID for events
with PERF_FORMAT_GROUP read format set, where it's impossible
to get correct event id out of the read call data.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-psgb4n7kte8e6tfenbe7nj2h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 15 Oct 2012 18:13:45 +0000 (20:13 +0200)]
perf: Do not get values from disabled counters in group format read
It's possible some of the counters in the group could be
disabled when sampling member of the event group is reading
the rest via PERF_SAMPLE_READ sample type processing. Disabled
counters could then produce wrong numbers.
Fixing that by reading only enabled counters for PERF_SAMPLE_READ
sample type processing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-wwkjb0bbcuslnz0klrmqi26r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 24 Oct 2012 11:37:58 +0000 (13:37 +0200)]
perf: Add PERF_EVENT_IOC_ID ioctl to return event ID
The only way to get the event ID is by reading the event fd,
followed by parsing the ID value out of the returned data.
While this is ok for current read format used by perf tool,
it is not ok when we use PERF_FORMAT_GROUP format.
With this format the data are returned for the whole group
and there's no way to find out what ID belongs to our fd
(if we are not group leader event).
Adding a simple ioctl that returns event primary ID for given fd.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-v1bn5cto707jn0bon34afqr1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Frederic Weisbecker [Tue, 23 Jul 2013 00:31:06 +0000 (02:31 +0200)]
watchdog: Make it work under full dynticks
A perf event can be used without forcing the tick to
stay alive if it doesn't use a frequency but a sample
period and if it doesn't throttle (raise storm of events).
Since the lockup detector neither use a perf event frequency
nor should ever throttle due to its high period, it can now
run concurrently with the full dynticks feature.
So remove the hack that disabled the watchdog.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anish Singh <anish198519851985@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-9-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Frederic Weisbecker [Tue, 23 Jul 2013 00:31:05 +0000 (02:31 +0200)]
perf: Implement finer grained full dynticks kick
Currently the full dynticks subsystem keep the
tick alive as long as there are perf events running.
This prevents the tick from being stopped as long as features
such that the lockup detectors are running. As a temporary fix,
the lockup detector is disabled by default when full dynticks
is built but this is not a long term viable solution.
To fix this, only keep the tick alive when an event configured
with a frequency rather than a period is running on the CPU,
or when an event throttles on the CPU.
These are the only purposes of the perf tick, especially now that
the rotation of flexible events is handled from a seperate hrtimer.
The tick can be shutdown the rest of the time.
Original-patch-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-8-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Frederic Weisbecker [Tue, 23 Jul 2013 00:31:04 +0000 (02:31 +0200)]
perf: Account freq events per cpu
This is going to be used by the full dynticks subsystem
as a finer-grained information to know when to keep and
when to stop the tick.
Original-patch-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-7-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Frederic Weisbecker [Tue, 23 Jul 2013 00:31:03 +0000 (02:31 +0200)]
perf: Migrate per cpu event accounting
When an event is migrated, move the event per-cpu
accounting accordingly so that branch stack and cgroup
events work correctly on the new CPU.
Original-patch-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-6-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Frederic Weisbecker [Tue, 23 Jul 2013 00:31:02 +0000 (02:31 +0200)]
perf: Split the per-cpu accounting part of the event accounting code
This way we can use the per-cpu handling seperately.
This is going to be used by to fix the event migration
code accounting.
Original-patch-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-5-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Frederic Weisbecker [Tue, 23 Jul 2013 00:31:01 +0000 (02:31 +0200)]
perf: Factor out event accounting code to account_event()/__free_event()
Gather all the event accounting code to a single place,
once all the prerequisites are completed. This simplifies
the refcounting.
Original-patch-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-4-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Frederic Weisbecker [Tue, 23 Jul 2013 00:31:00 +0000 (02:31 +0200)]
perf: Sanitize get_callchain_buffer()
In case of allocation failure, get_callchain_buffer() keeps the
refcount incremented for the current event.
As a result, when get_callchain_buffers() returns an error,
we must cleanup what it did by cancelling its last refcount
with a call to put_callchain_buffers().
This is a hack in order to be able to call free_event()
after that failure.
The original purpose of that was to simplify the failure
path. But this error handling is actually counter intuitive,
ugly and not very easy to follow because one expect to
see the resources used to perform a service to be cleaned
by the callee if case of failure, not by the caller.
So lets clean this up by cancelling the refcount from
get_callchain_buffer() in case of failure. And correctly free
the event accordingly in perf_event_alloc().
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Frederic Weisbecker [Tue, 23 Jul 2013 00:30:59 +0000 (02:30 +0200)]
perf: Fix branch stack refcount leak on callchain init failure
On callchain buffers allocation failure, free_event() is
called and all the accounting performed in perf_event_alloc()
for that event is cancelled.
But if the event has branch stack sampling, it is unaccounted
as well from the branch stack sampling events refcounts.
This is a bug because this accounting is performed after the
callchain buffer allocation. As a result, the branch stack sampling
events refcount can become negative.
To fix this, move the branch stack event accounting before the
callchain buffer allocation.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Thu, 4 Jul 2013 04:56:46 +0000 (12:56 +0800)]
sched: Micro-optimize the smart wake-affine logic
Smart wake-affine is using node-size as the factor currently, but the overhead
of the mask operation is high.
Thus, this patch introduce the 'sd_llc_size' percpu variable, which will record
the highest cache-share domain size, and make it to be the new factor, in order
to reduce the overhead and make it more reasonable.
Tested-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Link: http://lkml.kernel.org/r/51D5008E.6030102@linux.vnet.ibm.com
[ Tidied up the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Michael Wang [Thu, 4 Jul 2013 04:55:51 +0000 (12:55 +0800)]
sched: Implement smarter wake-affine logic
The wake-affine scheduler feature is currently always trying to pull
the wakee close to the waker. In theory this should be beneficial if
the waker's CPU caches hot data for the wakee, and it's also beneficial
in the extreme ping-pong high context switch rate case.
Testing shows it can benefit hackbench up to 15%.
However, the feature is somewhat blind, from which some workloads
such as pgbench suffer. It's also time-consuming algorithmically.
Testing shows it can damage pgbench up to 50% - far more than the
benefit it brings in the best case.
So wake-affine should be smarter and it should realize when to
stop its thankless effort at trying to find a suitable CPU to wake on.
This patch introduces 'wakee_flips', which will be increased each
time the task flips (switches) its wakee target.
So a high 'wakee_flips' value means the task has more than one
wakee, and the bigger the number, the higher the wakeup frequency.
Now when making the decision on whether to pull or not, pay attention to
the wakee with a high 'wakee_flips', pulling such a task may benefit
the wakee. Also imply that the waker will face cruel competition later,
it could be very cruel or very fast depends on the story behind
'wakee_flips', waker therefore suffers.
Furthermore, if waker also has a high 'wakee_flips', that implies that
multiple tasks rely on it, then waker's higher latency will damage all
of them, so pulling wakee seems to be a bad deal.
Thus, when 'waker->wakee_flips / wakee->wakee_flips' becomes
higher and higher, the cost of pulling seems to be worse and worse.
The patch therefore helps the wake-affine feature to stop its pulling
work when:
wakee->wakee_flips > factor &&
waker->wakee_flips > (factor * wakee->wakee_flips)
The 'factor' here is the number of CPUs in the current CPU's NUMA node,
so a bigger node will lead to more pulling since the trial becomes more
severe.
After applying the patch, pgbench shows up to 40% improvements and no regressions.
Tested with 12 cpu x86 server and tip 3.10.0-rc7.
The percentages in the final column highlight the areas with the biggest wins,
all other areas improved as well:
pgbench base smart
| db_size | clients | tps | | tps |
+---------+---------+-------+ +-------+
| 22 MB | 1 | 10598 | | 10796 |
| 22 MB | 2 | 21257 | | 21336 |
| 22 MB | 4 | 41386 | | 41622 |
| 22 MB | 8 | 51253 | | 57932 |
| 22 MB | 12 | 48570 | | 54000 |
| 22 MB | 16 | 46748 | | 55982 | +19.75%
| 22 MB | 24 | 44346 | | 55847 | +25.93%
| 22 MB | 32 | 43460 | | 54614 | +25.66%
| 7484 MB | 1 | 8951 | | 9193 |
| 7484 MB | 2 | 19233 | | 19240 |
| 7484 MB | 4 | 37239 | | 37302 |
| 7484 MB | 8 | 46087 | | 50018 |
| 7484 MB | 12 | 42054 | | 48763 |
| 7484 MB | 16 | 40765 | | 51633 | +26.66%
| 7484 MB | 24 | 37651 | | 52377 | +39.11%
| 7484 MB | 32 | 37056 | | 51108 | +37.92%
| 15 GB | 1 | 8845 | | 9104 |
| 15 GB | 2 | 19094 | | 19162 |
| 15 GB | 4 | 36979 | | 36983 |
| 15 GB | 8 | 46087 | | 49977 |
| 15 GB | 12 | 41901 | | 48591 |
| 15 GB | 16 | 40147 | | 50651 | +26.16%
| 15 GB | 24 | 37250 | | 52365 | +40.58%
| 15 GB | 32 | 36470 | | 50015 | +37.14%
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/51D50057.9000809@linux.vnet.ibm.com
[ Improved the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vladimir Davydov [Mon, 15 Jul 2013 13:49:19 +0000 (17:49 +0400)]
sched: Move h_load calculation to task_h_load()
The bad thing about update_h_load(), which computes hierarchical load
factor for task groups, is that it is called for each task group in the
system before every load balancer run, and since rebalance can be
triggered very often, this function can eat really a lot of cpu time if
there are many cpu cgroups in the system.
Although the situation was improved significantly by commit a35b646
('sched, cgroup: Reduce rq->lock hold times for large cgroup
hierarchies'), the problem still can arise under some kinds of loads,
e.g. when cpus are switching from idle to busy and back very frequently.
For instance, when I start 1000 of processes that wake up every
millisecond on my 8 cpus host, 'top' and 'perf top' show:
Cpu(s): 17.8%us, 24.3%sy, 0.0%ni, 57.9%id, 0.0%wa, 0.0%hi, 0.0%si
Events: 243K cycles
7.57% [kernel] [k] __schedule
7.08% [kernel] [k] timerqueue_add
6.13% libc-2.12.so [.] usleep
Then if I create 10000 *idle* cpu cgroups (no processes in them), cpu
usage increases significantly although the 'wakers' are still executing
in the root cpu cgroup:
Cpu(s): 19.1%us, 48.7%sy, 0.0%ni, 31.6%id, 0.0%wa, 0.0%hi, 0.7%si
Events: 230K cycles
24.56% [kernel] [k] tg_load_down
5.76% [kernel] [k] __schedule
This happens because this particular kind of load triggers 'new idle'
rebalance very frequently, which requires calling update_h_load(),
which, in turn, calls tg_load_down() for every *idle* cpu cgroup even
though it is absolutely useless, because idle cpu cgroups have no tasks
to pull.
This patch tries to improve the situation by making h_load calculation
proceed only when h_load is really necessary. To achieve this, it
substitutes update_h_load() with update_cfs_rq_h_load(), which computes
h_load only for a given cfs_rq and all its ascendants, and makes the
load balancer call this function whenever it considers if a task should
be pulled, i.e. it moves h_load calculations directly to task_h_load().
For h_load of the same cfs_rq not to be updated multiple times (in case
several tasks in the same cgroup are considered during the same balance
run), the patch keeps the time of the last h_load update for each cfs_rq
and breaks calculation when it finds h_load to be uptodate.
The benefit of it is that h_load is computed only for those cfs_rq's,
which really need it, in particular all idle task groups are skipped.
Although this, in fact, moves h_load calculation under rq lock, it
should not affect latency much, because the amount of work done under rq
lock while trying to pull tasks is limited by sched_nr_migrate.
After the patch applied with the setup described above (1000 wakers in
the root cgroup and 10000 idle cgroups), I get:
Cpu(s): 16.9%us, 24.8%sy, 0.0%ni, 58.4%id, 0.0%wa, 0.0%hi, 0.0%si
Events: 242K cycles
7.57% [kernel] [k] __schedule
6.70% [kernel] [k] timerqueue_add
5.93% libc-2.12.so [.] usleep
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1373896159-1278-1-git-send-email-vdavydov@parallels.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adrian Hunter [Fri, 28 Jun 2013 13:22:19 +0000 (16:22 +0300)]
perf tools: Add test for converting perf time to/from TSC
The test uses the newly added cap_usr_time_zero and time_zero of
perf_event_mmap_page. TSC from rdtsc is compared with the time
from 2 perf events. The test passes if the calculated times are
all in the correct order.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1372425741-1676-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adrian Hunter [Fri, 28 Jun 2013 13:22:18 +0000 (16:22 +0300)]
perf/x86: Add ability to calculate TSC from perf sample timestamps
For modern CPUs, perf clock is directly related to TSC. TSC
can be calculated from perf clock and vice versa using a simple
calculation. Two of the three componenets of that calculation
are already exported in struct perf_event_mmap_page. This patch
exports the third.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1372425741-1676-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adrian Hunter [Fri, 28 Jun 2013 13:22:17 +0000 (16:22 +0300)]
perf: Fix broken union in 'struct perf_event_mmap_page'
The capabilities bits must not be "union'ed" together.
Put them in a separate struct.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372425741-1676-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 16 Jul 2013 15:09:07 +0000 (17:09 +0200)]
perf: Update perf_event_type documentation
Due to a discussion with Adrian I had a good look at the perf_event_type record
layout and found the documentation to be somewhat unclear.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130716150907.GL23818@dyad.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Kosina [Tue, 23 Jul 2013 08:09:28 +0000 (10:09 +0200)]
kprobes/x86: Call out into INT3 handler directly instead of using notifier
In
fd4363fff3d96 ("x86: Introduce int3 (breakpoint)-based
instruction patching"), the mechanism that was introduced for
notifying alternatives code from int3 exception handler that and
exception occured was die_notifier.
This is however problematic, as early code might be using jump
labels even before the notifier registration has been performed,
which will then lead to an oops due to unhandled exception. One
of such occurences has been encountered by Fengguang:
int3: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc1-01429-g04bf576 #8
task:
ffff88000da1b040 ti:
ffff88000da1c000 task.ti:
ffff88000da1c000
RIP: 0010:[<
ffffffff811098cc>] [<
ffffffff811098cc>] ttwu_do_wakeup+0x28/0x225
RSP: 0000:
ffff88000dd03f10 EFLAGS:
00000006
RAX:
0000000000000000 RBX:
ffff88000dd12940 RCX:
ffffffff81769c40
RDX:
0000000000000002 RSI:
0000000000000000 RDI:
0000000000000001
RBP:
ffff88000dd03f28 R08:
ffffffff8176a8c0 R09:
0000000000000002
R10:
ffffffff810ff484 R11:
ffff88000dd129e8 R12:
ffff88000dbc90c0
R13:
ffff88000dbc90c0 R14:
ffff88000da1dfd8 R15:
ffff88000da1dfd8
FS:
0000000000000000(0000) GS:
ffff88000dd00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
00000000ffffffff CR3:
0000000001c88000 CR4:
00000000000006e0
Stack:
ffff88000dd12940 ffff88000dbc90c0 ffff88000da1dfd8 ffff88000dd03f48
ffffffff81109e2b ffff88000dd12940 0000000000000000 ffff88000dd03f68
ffffffff81109e9e 0000000000000000 0000000000012940 ffff88000dd03f98
Call Trace:
<IRQ>
[<
ffffffff81109e2b>] ttwu_do_activate.constprop.56+0x6d/0x79
[<
ffffffff81109e9e>] sched_ttwu_pending+0x67/0x84
[<
ffffffff8110c845>] scheduler_ipi+0x15a/0x2b0
[<
ffffffff8104dfb4>] smp_reschedule_interrupt+0x38/0x41
[<
ffffffff8173bf5d>] reschedule_interrupt+0x6d/0x80
<EOI>
[<
ffffffff810ff484>] ? __atomic_notifier_call_chain+0x5/0xc1
[<
ffffffff8105cc30>] ? native_safe_halt+0xd/0x16
[<
ffffffff81015f10>] default_idle+0x147/0x282
[<
ffffffff81017026>] arch_cpu_idle+0x3d/0x5d
[<
ffffffff81127d6a>] cpu_idle_loop+0x46d/0x5db
[<
ffffffff81127f5c>] cpu_startup_entry+0x84/0x84
[<
ffffffff8104f4f8>] start_secondary+0x3c8/0x3d5
[...]
Fix this by directly calling poke_int3_handler() from the int3
exception handler (analogically to what ftrace has been doing
already), instead of relying on notifier, registration of which
might not have yet been finalized by the time of the first trap.
Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307231007490.14024@pobox.suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Tue, 23 Jul 2013 07:37:33 +0000 (09:37 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Fix memcpy benchmark for large sizes, from Andi Kleen.
* Support callchain sorting based on addresses, from Andi Kleen
* Move weight back to common sort keys, From Andi Kleen.
* Fix named threads support in 'perf script', from David Ahern.
* Handle ENODEV on default cycles event, fix from David Ahern.
* More install tests, from Jiri Olsa.
* Fix build with perl 5.18, from Kirill A. Shutemov.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi Kleen [Thu, 18 Jul 2013 22:58:53 +0000 (15:58 -0700)]
perf tools: Move weight back to common sort keys
This is a partial revert of Namhyung's patch
afab87b91f3f331d55664172dad8e476e6ffca9d
perf sort: Separate out memory-specific sort keys
He wrote
For global/local weights, I'm not entirely sure to place them into the
memory dimension. But it's the only user at this time.
Well TSX is another (in fact the original) user of the flags, and it
needs them to be common. So move local/global weight back to the common
sort keys.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1374188333-17899-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 22 Jul 2013 12:43:34 +0000 (14:43 +0200)]
perf tests: Add broken install-* tests into tests/make
Adding install-* tests into tests/make. Those tests are
broken, so commenting them out right away.
* Nothing get installed for install-man, install_doc and
install_html targets, they just rebuild the documentation.
* I've got following error for 'install-info':
$ make -f tests/make make_install_info
- make_install_info: cd . && make -f Makefile DESTDIR=/tmp/tmp.Xi4mb9J1a0 install-info
$ tail -f make_install_info
...
PERF_VERSION = 3.11.rc1.g9b3c2d
make[2]: *** No rule to make target `user-manual.xml', needed by `user-manual.texi'. Stop.
make[1]: *** [install-info] Error 2
* I've got following error for 'install-pdf':
$ make -f tests/make make_install_pdf
- make_install_pdf: cd . && make -f Makefile DESTDIR=/tmp/tmp.fXseECBbt1 install-pdf
$ tail -f make_install_pdf
...
PERF_VERSION = 3.11.rc1.g9b3c2d
make[2]: *** No rule to make target `user-manual.xml', needed by `user-manual.pdf'. Stop.
make[1]: *** [install-pdf] Error 2
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 22 Jul 2013 12:43:33 +0000 (14:43 +0200)]
perf tests: Add 'make install/install-bin' tests into tests/make
Adding 'make install' and 'make install-bin' tests into tests/make. It's
run as part of the suite, but could be run separately like:
$ make -f tests/make make_install
- make_install: cd . && make -f Makefile DESTDIR=/tmp/tmp.LpkYbk5pfs install
test: test -x /tmp/tmp.LpkYbk5pfs/bin/perf
$ make -f tests/make make_install_bin
- make_install_bin: cd . && make -f Makefile DESTDIR=/tmp/tmp.dMxePBMcFT
install-bin
test: test -x /tmp/tmp.dMxePBMcFT/bin/perf
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 22 Jul 2013 12:43:32 +0000 (14:43 +0200)]
perf tests: Add DESTDIR=TMP_DEST tests/make variable
Adding TMP_DEST tests/make variable to provide the DESTDIR directory for
installation tests.
Adding this to existing test targets, since DESTDIR variable 'should
not' affect other than install* targets. We can always separate this if
there's a need for DESTDIR-free build test.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 22 Jul 2013 12:43:31 +0000 (14:43 +0200)]
perf tests: Rename TMP to TMP_O tests/make variable
Renaming TMP to TMP_O tests/make variable to make a name space for other
temp variables.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 22 Jul 2013 12:43:30 +0000 (14:43 +0200)]
perf tests: Run ctags/cscope make tests only with needed binaries
Running tags and cscope make tests only if the 'ctags' and 'cscope'
binaries are installed, so we don't have false alarm test failures.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kirill A. Shutemov [Mon, 24 Jun 2013 08:43:14 +0000 (11:43 +0300)]
perf tools: Fix build with perl 5.18
perl.h from new Perl release doesn't like -Wundef and -Wswitch-default:
/usr/lib/perl5/core_perl/CORE/perl.h:548:5: error: "SILENT_NO_TAINT_SUPPORT" is not defined [-Werror=undef]
#if SILENT_NO_TAINT_SUPPORT && !defined(NO_TAINT_SUPPORT)
^
/usr/lib/perl5/core_perl/CORE/perl.h:556:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
#if NO_TAINT_SUPPORT
^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3471:0,
from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/sv.h:1455:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
#if NO_TAINT_SUPPORT
^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3472:0,
from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/regexp.h:436:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
#if NO_TAINT_SUPPORT
^
In file included from /usr/lib/perl5/core_perl/CORE/hv.h:592:0,
from /usr/lib/perl5/core_perl/CORE/perl.h:3480,
from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_siphash_2_4’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:222:3: error: switch missing default case [-Werror=switch-default]
switch( left )
^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_superfast’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:274:5: error: switch missing default case [-Werror=switch-default]
switch (rem) { \
^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_murmur3’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:398:5: error: switch missing default case [-Werror=switch-default]
switch(bytes_in_carry) { /* how many bytes in carry */
^
Let's disable the warnings for code which uses perl.h.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372063394-20126-1-git-send-email-kirill@shutemov.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Thu, 18 Jul 2013 22:33:57 +0000 (15:33 -0700)]
perf tools: Support callchain sorting based on addresses
With programs with very large functions it can be useful to distinguish
the callgraph nodes on more than just function names. So for example if
you have multiple calls to the same function, it ends up being separate
nodes in the chain.
This patch adds a new key field to the callgraph options, that allows
comparing nodes on functions (as today, default) and addresses.
Longer term it would be nice to also handle src lines, but that would
need more changes and address is a reasonable proxy for it today.
I right now reference the global params, as there was no simple way to
register a params pointer.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-0uskktybf0e7wrnoi5e9b9it@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Thu, 18 Jul 2013 22:33:46 +0000 (15:33 -0700)]
perf bench: Fix memcpy benchmark for large sizes
The glibc calloc() function has an optimization to not explicitely
memset() very large calloc allocations that just came from mmap(),
because they are known to be zero.
This could result in the perf memcpy benchmark reading only from
the zero page, which gives unrealistic results.
Always call memset explicitly on the source area to avoid this problem.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-pzz2qrdq9eymxda0y8yxdn33@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Thu, 18 Jul 2013 23:27:59 +0000 (17:27 -0600)]
perf evsel: Handle ENODEV on default cycles event
Some systems (e.g., VMs on qemu-0.13 with the default vcpu model) report
an unsupported CPU model:
Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
Subsequent invocations of perf fail with:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (cycles).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?
Add ENODEV to the list of errno's to fallback to cpu-clock.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374190079-28507-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Thu, 18 Jul 2013 22:06:15 +0000 (16:06 -0600)]
perf script: Fix named threads support
Commit 73994dc broke named thread support in perf-script. The thread
struct in al is the main thread for a multithreaded process. The thread
struct used for analysis (e.g., dumping events) should be the specific
thread for the sample.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: http://lkml.kernel.org/r/1374185175-28272-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Thu, 18 Jul 2013 11:47:53 +0000 (20:47 +0900)]
kprobes/x86: Remove unused text_poke_smp() and text_poke_smp_batch() functions
Since introducing the text_poke_bp() for all text_poke_smp*()
callers, text_poke_smp*() are now unused. This patch basically
reverts:
3d55cc8a058e ("x86: Add text_poke_smp for SMP cross modifying code")
7deb18dcf047 ("x86: Introduce text_poke_smp_batch() for batch-code modifying")
and related commits.
This patch also fixes a Kconfig dependency issue on STOP_MACHINE
in the case of CONFIG_SMP && !CONFIG_MODULE_UNLOAD.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Borislav Petkov <bpetkov@suse.de>
Link: http://lkml.kernel.org/r/20130718114753.26675.18714.stgit@mhiramat-M0-7522
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Masami Hiramatsu [Thu, 18 Jul 2013 11:47:50 +0000 (20:47 +0900)]
kprobes/x86: Use text_poke_bp() instead of text_poke_smp*()
Use text_poke_bp() for optimizing kprobes instead of
text_poke_smp*(). Since the number of kprobes is usually not so
large (<100) and text_poke_bp() is much lighter than
text_poke_smp() [which uses stop_machine()], this just stops
using batch processing.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Borislav Petkov <bpetkov@suse.de>
Link: http://lkml.kernel.org/r/20130718114750.26675.9174.stgit@mhiramat-M0-7522
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Masami Hiramatsu [Thu, 18 Jul 2013 11:47:47 +0000 (20:47 +0900)]
kprobes/x86: Remove an incorrect comment about int3 in NMI/MCE
Remove a comment about an int3 issue in NMI/MCE, since
commit:
3f3c8b8c4b2a ("x86: Add workaround to NMI iret woes")
already fixed that. Keeping this incorrect comment can mislead developers.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Borislav Petkov <bpetkov@suse.de>
Link: http://lkml.kernel.org/r/20130718114747.26675.84110.stgit@mhiramat-M0-7522
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 19 Jul 2013 07:55:00 +0000 (09:55 +0200)]
Merge branch 'x86/jumplabel' into perf/core
Upcoming kprobes patches rely on the int3 code-patching machinery introduced by:
fd4363fff3d9 x86: Introduce int3 (breakpoint)-based instruction patching
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 19 Jul 2013 07:35:30 +0000 (09:35 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Add missing 'finished_round' event forwarding in 'perf inject', from Adrian Hunter.
* Assorted tidy ups, from Adrian Hunter.
* Fall back to sysfs event names when parsing fails, from Andi Kleen.
* List pmu events in perf list, from Andi Kleen.
* Cleanup some memory allocation/freeing uses, from David Ahern.
* Add option to collapse undesired parts of call graph, from Greg Price.
* Prep work for multi perf data file storage, from Jiri Olsa.
* Add support for more than two files comparision in 'perf diff', from Jiri Olsa
* A few more 'perf test' improvements, from Jiri Olsa
* libtraceevent cleanups, from Namhyung Kim.
* Remove odd build stall in 'perf sched' by moving a large struct initialization
from a local variable to a global one, from Namhyung Kim.
* Add support for callchains in the gtk UI, from Namhyung Kim.
* Do not apply symfs for an absolute vmlinux path, fix from Namhyung Kim.
* Use default include path notation for libtraceevent, from Robert Richter.
* Fix 'make tools/perf', from Robert Richter.
* Make Power7 events available, from Runzhen Wang.
* Add --objdump option to 'perf top', from Sukadev Bhattiprolu.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 19 Jul 2013 07:34:42 +0000 (09:34 +0200)]
Merge branch 'linus' into perf/core
Merge in a v3.11-rc1-ish branch to go from v3.10 based development
to a v3.11 based one.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Fri, 19 Jul 2013 03:08:47 +0000 (20:08 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"A couple interesting SKB fragment handling fixes, plus the usual small
bits here and there:
1) Fix 64-bit divide build failure on 32-bit platforms in mlx5, from
Tim Gardner.
2) Get rid of a stupid reimplementation on "%*phC" in our sysfs MAC
address printing helper.
3) Fix NETIF_F_SG capability advertisement in hyperv driver, if the
device can't do checksumming offloads then it shouldn't say it can
do SG either. From Haiyang Zhang.
4) bgmac needs to depend on PHYLIB, from Hauke Mehrtens.
5) Don't leak DMA mappings on mapping failures, from Neil Horman.
6) We need to reset the transport header of SKBs in ipv4 before we
attempt to perform early socket demux, just like ipv6 does. From
Eric Dumazet.
7) Add missing locking on vxlan device removal, from Stephen
Hemminger.
8) xen-netfront has to make two passes over an SKB to prepare it for
transfer. One pass calculates the number of slots needed, the
second massages the SKB and fills the slots. Unfortunately, the
first pass doesn't calculate the number of slots properly so we
can end up trying to build a MAX_SKB_FRAGS + 1 SKB which doesn't
work out so well. Fix from Jan Beulich with help and discussion
with several others.
9) Fix a similar problem in tun and macvtap, which have to split up
scatter-gather elements at PAGE_SIZE boundaries. Don't do
zerocopy if it would result in a > MAX_SKB_FRAGS skb. Fixes from
Jason Wang.
10) On receive, once we've decoded the VLAN state completely, clear
skb->vlan_tci. Otherwise demuxed tunnels underneath can trigger
the VLAN code again, corrupting the packet. Fix from Eric
Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
vlan: fix a race in egress prio management
vlan: mask vlan prio bits
macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
pkt_sched: sch_qfq: remove a source of high packet delay/jitter
xen-netfront: pull on receive skb may need to happen earlier
vxlan: add necessary locking on device removal
hyperv: Fix the NETIF_F_SG flag setting in netvsc
net: Fix sysfs_format_mac() code duplication.
be2net: Fix to avoid hardware workaround when not needed
macvtap: do not assume 802.1Q when send vlan packets
macvtap: fix the missing ret value of TUNSETQUEUE
ipv4: set transport header earlier
mlx5 core: Fix __udivdi3 when compiling for 32 bit arches
bgmac: add dependency to phylib
net/irda: fixed style issues in irlan_eth
ethtool: fixed trailing statements in ethtool
ndisc: bool initializations should use true and false
atl1e: unmap partially mapped skb on dma error and free skb
Linus Torvalds [Fri, 19 Jul 2013 00:39:05 +0000 (17:39 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"Trying again to get the fixes queue, including the fixed IDT alignment
patch.
The UEFI patch is by far the biggest issue at hand: it is currently
causing quite a few machines to boot. Which is sad, because the only
reason they would is because their BIOSes touch memory that has
already been freed. The other major issue is that we finally have
tracked down the root cause of a significant number of machines
failing to suspend/resume"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Make sure IDT is page aligned
x86, suspend: Handle CPUs which fail to #GP on RDMSR
x86/platform/ce4100: Add header file for reboot type
Revert "UEFI: Don't pass boot services regions to SetVirtualAddressMap()"
efivars: check for EFI_RUNTIME_SERVICES
Linus Torvalds [Fri, 19 Jul 2013 00:37:46 +0000 (17:37 -0700)]
Merge tag 'md-3.11-fixes' of git://neil.brown.name/md
Pull md bug fixes from NeilBrown:
"Sorry boss, back at work now boss. Here's them nice shiny patches ya
wanted. All nicely tagged and justified for -stable and everyfing:
Three bug fixes for md in 3.10
3.10 wasn't a good release for md. The bio changes left a couple of
bugs, and an md "fix" created another one.
These three patches appear to fix the issues and have been tagged for
-stable"
* tag 'md-3.11-fixes' of git://neil.brown.name/md:
md/raid1: fix bio handling problems in process_checks()
md: Remove recent change which allows devices to skip recovery.
md/raid10: fix two problems with RAID10 resync.
Linus Torvalds [Thu, 18 Jul 2013 21:01:08 +0000 (14:01 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"You'll be terribly disappointed in this, I'm not trying to sneak any
features in or anything, its mostly radeon and intel fixes, a couple
of ARM driver fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits)
drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
drm/radeon/dpm/atom: fix broken gcc harder
drm/radeon/dpm/atom: restructure logic to work around a compiler bug
drm/radeon/dpm: fix atom vram table parsing
drm/radeon: fix an endian bug in atom table parsing
drm/radeon: add a module parameter to disable aspm
drm/rcar-du: Use the GEM PRIME helpers
drm/shmobile: Use the GEM PRIME helpers
uvesafb: Really allow mtrr being 0, as documented and warn()ed
radeon kms: do not flush uninitialized hotplug work
drm/radeon/dpm/sumo: handle boost states properly when forcing a perf level
drm/radeon: align VM PTBs (Page Table Blocks) to 32K
drm/radeon: allow selection of alignment in the sub-allocator
drm/radeon: never unpin UVD bo v3
drm/radeon: fix UVD fence emit
drm/radeon: add fault decode function for CIK
drm/radeon: add fault decode function for SI (v2)
drm/radeon: add fault decode function for cayman/TN (v2)
drm/radeon: use radeon device for request firmware
drm/radeon: add missing ttm_eu_backoff_reservation to radeon_bo_list_validate
...
Eric Dumazet [Thu, 18 Jul 2013 16:35:10 +0000 (09:35 -0700)]
vlan: fix a race in egress prio management
egress_priority_map[] hash table updates are protected by rtnl,
and we never remove elements until device is dismantled.
We have to make sure that before inserting an new element in hash table,
all its fields are committed to memory or else another cpu could
find corrupt values and crash.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 18 Jul 2013 14:19:26 +0000 (07:19 -0700)]
vlan: mask vlan prio bits
In commit
48cc32d38a52d0b68f91a171a8d00531edc6a46e
("vlan: don't deliver frames for unknown vlans to protocols")
Florian made sure we set pkt_type to PACKET_OTHERHOST
if the vlan id is set and we could find a vlan device for this
particular id.
But we also have a problem if prio bits are set.
Steinar reported an issue on a router receiving IPv6 frames with a
vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device,
because skb->vlan_tci is set.
Forwarded frame is completely corrupted : We can see (8100:4000)
being inserted in the middle of IPv6 source address :
16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 >
9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64
0x0000: 0000 0029 8000 c7c3 7103 0001 a0ae e651
0x0010: 0000 0000 ccce 0b00 0000 0000 1011 1213
0x0020: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223
0x0030: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233
It seems we are not really ready to properly cope with this right now.
We can probably do better in future kernels :
vlan_get_ingress_priority() should be a netdev property instead of
a per vlan_dev one.
For stable kernels, lets clear vlan_tci to fix the bugs.
Reported-by: Steinar H. Gunderson <sesse@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Thu, 18 Jul 2013 02:55:16 +0000 (10:55 +0800)]
macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.
Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.
This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.
We can do further optimization on top.
This bug were introduced from
b92946e2919134ebe2a4083e4302236295ea2a73
(macvtap: zerocopy: validate vectors before building skb).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Thu, 18 Jul 2013 02:55:15 +0000 (10:55 +0800)]
tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.
Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.
This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.
We can do further optimization on top.
The bug were introduced from commit
0690899b4d4501b3505be069b9a687e68ccbe15b
(tun: experimental zero copy tx support)
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Valente [Tue, 16 Jul 2013 06:52:30 +0000 (08:52 +0200)]
pkt_sched: sch_qfq: remove a source of high packet delay/jitter
QFQ+ inherits from QFQ a design choice that may cause a high packet
delay/jitter and a severe short-term unfairness. As QFQ, QFQ+ uses a
special quantity, the system virtual time, to track the service
provided by the ideal system it approximates. When a packet is
dequeued, this quantity must be incremented by the size of the packet,
divided by the sum of the weights of the aggregates waiting to be
served. Tracking this sum correctly is a non-trivial task, because, to
preserve tight service guarantees, the decrement of this sum must be
delayed in a special way [1]: this sum can be decremented only after
that its value would decrease also in the ideal system approximated by
QFQ+. For efficiency, QFQ+ keeps track only of the 'instantaneous'
weight sum, increased and decreased immediately as the weight of an
aggregate changes, and as an aggregate is created or destroyed (which,
in its turn, happens as a consequence of some class being
created/destroyed/changed). However, to avoid the problems caused to
service guarantees by these immediate decreases, QFQ+ increments the
system virtual time using the maximum value allowed for the weight
sum, 2^10, in place of the dynamic, instantaneous value. The
instantaneous value of the weight sum is used only to check whether a
request of weight increase or a class creation can be satisfied.
Unfortunately, the problems caused by this choice are worse than the
temporary degradation of the service guarantees that may occur, when a
class is changed or destroyed, if the instantaneous value of the
weight sum was used to update the system virtual time. In fact, the
fraction of the link bandwidth guaranteed by QFQ+ to each aggregate is
equal to the ratio between the weight of the aggregate and the sum of
the weights of the competing aggregates. The packet delay guaranteed
to the aggregate is instead inversely proportional to the guaranteed
bandwidth. By using the maximum possible value, and not the actual
value of the weight sum, QFQ+ provides each aggregate with the worst
possible service guarantees, and not with service guarantees related
to the actual set of competing aggregates. To see the consequences of
this fact, consider the following simple example.
Suppose that only the following aggregates are backlogged, i.e., that
only the classes in the following aggregates have packets to transmit:
one aggregate with weight 10, say A, and ten aggregates with weight 1,
say B1, B2, ..., B10. In particular, suppose that these aggregates are
always backlogged. Given the weight distribution, the smoothest and
fairest service order would be:
A B1 A B2 A B3 A B4 A B5 A B6 A B7 A B8 A B9 A B10 A B1 A B2 ...
QFQ+ would provide exactly this optimal service if it used the actual
value for the weight sum instead of the maximum possible value, i.e.,
11 instead of 2^10. In contrast, since QFQ+ uses the latter value, it
serves aggregates as follows (easy to prove and to reproduce
experimentally):
A B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 A A A A A A A A A A B1 B2 ... B10 A A ...
By replacing 10 with N in the above example, and by increasing N, one
can increase at will the maximum packet delay and the jitter
experienced by the classes in aggregate A.
This patch addresses this issue by just using the above
'instantaneous' value of the weight sum, instead of the maximum
possible value, when updating the system virtual time. After the
instantaneous weight sum is decreased, QFQ+ may deviate from the ideal
service for a time interval in the order of the time to serve one
maximum-size packet for each backlogged class. The worst-case extent
of the deviation exhibited by QFQ+ during this time interval [1] is
basically the same as of the deviation described above (but, without
this patch, QFQ+ suffers from such a deviation all the time). Finally,
this patch modifies the comment to the function qfq_slot_insert, to
make it coherent with the fact that the weight sum used by QFQ+ can
now be lower than the maximum possible value.
[1] P. Valente, "Extending WF2Q+ to support a dynamic traffic mix",
Proceedings of AAA-IDEA'05, June 2005.
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 18 Jul 2013 19:48:40 +0000 (12:48 -0700)]
Merge tag 'driver-core-3.11-rc2' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg KH:
"Here are some driver core patches for 3.11-rc2. They aren't really
bugfixes, but a bunch of new helper macros for drivers to properly
create attribute groups, which drivers and subsystems need to fix up a
ton of race issues with incorrectly creating sysfs files (binary and
normal) after userspace has been told that the device is present.
Also here is the ability to create binary files as attribute groups,
to solve that race condition, which was impossible to do before this,
so that's my fault the drivers were broken.
The majority of the .c changes is indenting and moving code around a
bit. It affects no existing code, but allows the large backlog of 70+
patches that I already have created to start flowing into the
different subtrees, instead of having to live in my driver-core tree,
causing merge nightmares in linux-next for the next few months.
These were finalized too late for the -rc1 merge window, which is why
they were didn't make that pull request, testing and review from
others didn't happen until a few weeks ago, and then there's the whole
distraction of the past few days, which prevented these from getting
to you sooner, sorry about that.
Oh, and there's a bugfix for the documentation build warning in here
as well. All of these have been in linux-next this week, with no
reported problems"
* tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver-core: fix new kernel-doc warning in base/platform.c
sysfs: use file mode defines from stat.h
sysfs: add more helper macro's for (bin_)attribute(_groups)
driver core: add default groups to struct class
driver core: Introduce device_create_groups
sysfs: prevent warning when only using binary attributes
sysfs: add support for binary attributes in groups
driver core: device.h: add RW and RO attribute macros
sysfs.h: add BIN_ATTR macro
sysfs.h: add ATTRIBUTE_GROUPS() macro
sysfs.h: add __ATTR_RW() macro
Linus Torvalds [Thu, 18 Jul 2013 18:32:36 +0000 (11:32 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Single patch to staticize a local variable"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (abx500) Staticize abx500_temp_attributes
Linus Torvalds [Thu, 18 Jul 2013 17:50:26 +0000 (10:50 -0700)]
Merge branch 'cpuinit_phase2' of git://git./linux/kernel/git/paulg/linux
Pull phase two of __cpuinit removal from Paul Gortmaker:
"With the __cpuinit infrastructure removed earlier, this group of
commits only removes the function/data tagging that was done with the
various (now no-op) __cpuinit related prefixes.
Now that the dust has settled with yesterday's v3.11-rc1, there
hopefully shouldn't be any new users leaking back in tree, but I think
we can leave the harmless no-op stubs there for a release as a
courtesy to those who still have out of tree stuff and weren't paying
attention.
Although the commits are against the recent tag to allow for minor
context refreshes for things like yesterday's v3.11-rc1~ slab content,
the patches have been largely unchanged for weeks, aside from such
trivial updates.
For detail junkies, the largely boring and mostly irrelevant history
of the patches can be viewed at:
http://git.kernel.org/cgit/linux/kernel/git/paulg/cpuinit-delete.git
If nothing else, I guess it does at least demonstrate the level of
involvement required to shepherd such a treewide change to completion.
This is the same repository of patches that has been applied to the
end of the daily linux-next branches for the past several weeks"
* 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (28 commits)
block: delete __cpuinit usage from all block files
drivers: delete __cpuinit usage from all remaining drivers files
kernel: delete __cpuinit usage from all core kernel files
rcu: delete __cpuinit usage from all rcu files
net: delete __cpuinit usage from all net files
acpi: delete __cpuinit usage from all acpi files
hwmon: delete __cpuinit usage from all hwmon files
cpufreq: delete __cpuinit usage from all cpufreq files
clocksource+irqchip: delete __cpuinit usage from all related files
x86: delete __cpuinit usage from all x86 files
score: delete __cpuinit usage from all score files
xtensa: delete __cpuinit usage from all xtensa files
openrisc: delete __cpuinit usage from all openrisc files
m32r: delete __cpuinit usage from all m32r files
hexagon: delete __cpuinit usage from all hexagon files
frv: delete __cpuinit usage from all frv files
cris: delete __cpuinit usage from all cris files
metag: delete __cpuinit usage from all metag files
tile: delete __cpuinit usage from all tile files
sh: delete __cpuinit usage from all sh files
...
Linus Torvalds [Thu, 18 Jul 2013 17:48:48 +0000 (10:48 -0700)]
Merge tag 'sound-3.11' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Except for a slightly big OMAP changes, all rest are small, mostly
boring changes; all either 3.11 regression fixes or stable materials.
- ASoC OMAP fixes due to non-DT OMAP4 removals
- Other ASoC driver changes (sglt5000, wm8978, wm8948, samsung)
- Fix missing locking for snd_pcm_stop() calls in many drivers
- Fix the blocking request_module() in OSS sequencer
- Fix old OSS vwsnd driver builds
- Add a new HD-audio HDMI codec ID"
* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: seq-oss: Initialize MIDI clients asynchronously
ALSA: hda - Add new GPU codec ID to snd-hda
staging: line6: Fix unlocked snd_pcm_stop() call
[media] saa7134: Fix unlocked snd_pcm_stop() call
ASoC: s6000: Fix unlocked snd_pcm_stop() call
ASoC: atmel: Fix unlocked snd_pcm_stop() call
ALSA: pxa2xx: Fix unlocked snd_pcm_stop() call
ALSA: usx2y: Fix unlocked snd_pcm_stop() call
ALSA: ua101: Fix unlocked snd_pcm_stop() call
ALSA: 6fire: Fix unlocked snd_pcm_stop() call
ALSA: atiixp: Fix unlocked snd_pcm_stop() call
ALSA: asihpi: Fix unlocked snd_pcm_stop() call
sound: oss/vwsnd: Always define vwsnd_mutex
sound: oss/vwsnd: Add missing inclusion of linux/delay.h
ASoC: wm8978: enable symmetric rates
ASoC: omap-mcbsp: Use different method for DMA request when booted with DT
ASoC: omap-dmic: Do not use platform_get_resource_byname() for DMA
ASoC: omap-mcpdm: Do not use platform_get_resource_byname() for DMA
ASoC: omap-pcm: Request the DMA channel differently when DT is involved
ASoC: Samsung: Set RFS and BFS in slave mode
...
Dave Airlie [Thu, 18 Jul 2013 10:04:50 +0000 (20:04 +1000)]
Merge branch 'drm/3.11/fixes' of git://linuxtv.org/pinchartl/fbdev into drm-fixes
Fixes builds
* 'drm/3.11/fixes' of git://linuxtv.org/pinchartl/fbdev:
drm/rcar-du: Use the GEM PRIME helpers
drm/shmobile: Use the GEM PRIME helpers
NeilBrown [Wed, 17 Jul 2013 05:19:29 +0000 (15:19 +1000)]
md/raid1: fix bio handling problems in process_checks()
Recent change to use bio_copy_data() in raid1 when repairing
an array is faulty.
The underlying may have changed the bio in various ways using
bio_advance and these need to be undone not just for the 'sbio' which
is being copied to, but also the 'pbio' (primary) which is being
copied from.
So perform the reset on all bios that were read from and do it early.
This also ensure that the sbio->bi_io_vec[j].bv_len passed to
memcmp is correct.
This fixes a crash during a 'check' of a RAID1 array. The crash was
introduced in 3.10 so this is suitable for 3.10-stable.
Cc: stable@vger.kernel.org (3.10)
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Wed, 17 Jul 2013 04:55:31 +0000 (14:55 +1000)]
md: Remove recent change which allows devices to skip recovery.
commit
7ceb17e87bde79d285a8b988cfed9eaeebe60b86
md: Allow devices to be re-added to a read-only array.
allowed a bit more than just that. It also allows devices to be added
to a read-write array and to end up skipping recovery.
This patch removes the offending piece of code pending a rewrite for a
subsequent release.
More specifically:
If the array has a bitmap, then the device will still need a bitmap
based resync ('saved_raid_disk' is set under different conditions
is a bitmap is present).
If the array doesn't have a bitmap, then this is correct as long as
nothing has been written to the array since the metadata was checked
by ->validate_super. However there is no locking to ensure that there
was no write.
Bug was introduced in 3.10 and causes data corruption so
patch is suitable for 3.10-stable.
Cc: stable@vger.kernel.org (3.10)
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Tue, 16 Jul 2013 06:50:47 +0000 (16:50 +1000)]
md/raid10: fix two problems with RAID10 resync.
1/ When an different between blocks is found, data is copied from
one bio to the other. However bv_len is used as the length to
copy and this could be zero. So use r10_bio->sectors to calculate
length instead.
Using bv_len was probably always a bit dubious, but the introduction
of bio_advance made it much more likely to be a problem.
2/ When preparing some blocks for sync, we don't set BIO_UPTODATE
except on bios that we schedule for a read. This ensures that
missing/failed devices don't confuse the loop at the top of
sync_request write.
Commit
8be185f2c9d54d6 "raid10: Use bio_reset()"
removed a loop which set BIO_UPTDATE on all appropriate bios.
So we need to re-add that flag.
These bugs were introduced in 3.10, so this patch is suitable for
3.10-stable, and can remove a potential for data corruption.
Cc: stable@vger.kernel.org (3.10)
Reported-by: Brassow Jonathan <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Dave Airlie [Thu, 18 Jul 2013 00:19:46 +0000 (10:19 +1000)]
Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux
more DPM fixes for radeon.
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
drm/radeon/dpm/atom: fix broken gcc harder
drm/radeon/dpm/atom: restructure logic to work around a compiler bug
drm/radeon/dpm: fix atom vram table parsing
drm/radeon: fix an endian bug in atom table parsing
drm/radeon: add a module parameter to disable aspm
Alex Deucher [Tue, 2 Jul 2013 17:05:23 +0000 (13:05 -0400)]
drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
This allows you to look at the current DPM state via
debugfs.
Due to the way the hardware works on these asics, there's
no way to look up exactly what power state we are in, so
we make the best guess we can based on the current sclk.
v2: Anthoine's version
v3: fix ref div
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / log