review.tizen.org Git - platform/kernel/linux-starfive.git/log

netfilter: conntrack: set icmpv6 redirects as RELATED

[ Upstream commit 7d7cfb48d81353e826493d24c7cec7360950968f ]

icmp conntrack will set icmp redirects as RELATED, but icmpv6 will not
do this.

For icmpv6, only icmp errors (code <= 128) are examined for RELATED state.
ICMPV6 Redirects are part of neighbour discovery mechanism, those are
handled by marking a selected subset (e.g. neighbour solicitations) as
UNTRACKED, but not REDIRECT -- they will thus be flagged as INVALID.

Add minimal support for REDIRECTs. No parsing of neighbour options is
added for simplicity, so this will only check that we have the embeeded
original header (ND_OPT_REDIRECT_HDR), and then attempt to do a flow
lookup for this tuple.

Also extend the existing test case to cover redirects.

Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Eric Garver <eric@garver.life>
Link: https://github.com/firewalld/firewalld/issues/1046
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: visconti: Fix memory leak in visconti_register_pll()

[ Upstream commit b55226f8553d255f5002c751c7c6ba9291f34bf2 ]

@pll->rate_table has allocated memory by kmemdup(), if clk_hw_register()
fails, it should be freed, otherwise it will cause memory leak issue,
this patch fixes it.

Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221122152353.204132-1-xiujianfeng@huawei.com
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe

[ Upstream commit 97b801be6f8e53676b9f2b105f54e35c745c1b22 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by going to
err_pm instead of err_clk.

Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160402.126140-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/bios: fix a memory leak in generate_lfp_data_ptrs

[ Upstream commit 1382901f75a5a7dc8eac05059fd0c7816def4eae ]

When (size != 0 || ptrs->lvds_ entries != 3), the program tries to
free() the ptrs. However, the ptrs is not created by calling kzmalloc(),
but is obtained by pointer offset operation.
This may lead to memory leaks or undefined behavior.

Fix this by replacing the arguments of kfree() with ptrs_block.

Fixes: a87d0a847607 ("drm/i915/bios: Generate LFP data table pointers if the VBT lacks them")
Signed-off-by: Xia Fukun <xiafukun@huawei.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125063428.69486-1-xiafukun@huawei.com
(cherry picked from commit 7674cd0b7d28b952151c3df26bbfa7e07eb2b4ec)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix memory leakage

[ Upstream commit 75818afff631e1ea785a82c3e8bb82eb0dee539c ]

This patch fixes potential memory leakage and seg fault
in _gpuvm_import_dmabuf() function

Fixes: d4ec4bdc0bd5 ("drm/amdkfd: Allow access for mmapping KFD BOs")
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()

[ Upstream commit ca54639c7752edf1304d92ff4d0c049d4efc9ba0 ]

As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.

If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()

[ Upstream commit 725a521a18734f65de05b8d353b5bd0d3ca4c37a ]

As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.

If we break the loop in radeon_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.

Fixes: d8ade3526b2a ("drm/radeon: handle non-VGA class pci devices with ATRM")
Fixes: c61e2775873f ("drm/radeon: split ATRM support out from the ATPX handler (v3)")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amdgpu/nv.c: Corrected typo in the video capabilities resolution

[ Upstream commit 65009bf2b4d287ef7ad7e6eb082b7c3d35eb611f ]

Corrected the typo in the 4K resolution parameters.

Fixes: b3a24461f9fb15 ("amdgpu/nv.c - Added codec query for Beige Goby")
Fixes: 9075096b09e590 ("amdgpu/nv.c - Optimize code for video codec support structure")
Fixes: 9ac0edaa0f8323 ("drm/amdgpu: add vcn_4_0_0 video codec query")

Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm/smu11: BACO is supported when it's in BACO state

[ Upstream commit 6dca7efe6e522bf213c7dab691fa580d82f48f74 ]

Return true early if ASIC is in BACO state already, no need
to talk to SMU. It can fix the issue that driver was not
calling BACO exit at all in runtime pm resume, and a timing
issue leading to a PCI AER error happened eventually.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mediatek: fix dependency of MT7986 ADC clocks

[ Upstream commit a46315295489933209e902638cd287aeb5f982ab ]

It seems like CLK_INFRA_ADC_FRC_CK always need to be enabled for
CLK_INFRA_ADC_26M_CK to work. Instead of adding this dependency to the
mtk-thermal and mt6577_auxadc drivers, add dependency to the clock
driver clk-mt7986-infracfg.c.

Fixes: ec97d23c8e22 ("clk: mediatek: add mt7986 clock support")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/5e55012567da74870e1fb2edc2dc513b5821e523.1666801017.git.daniel@makrotopia.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8173: Enable IRQ when pdata is ready

[ Upstream commit 4cbb264d4e9136acab2c8fd39e39ab1b1402b84b ]

If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.

Fixes:

[    2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4
[    2.522601] Call trace:
[    2.525040]  regmap_read+0x1c/0x80
[    2.528434]  mt8173_afe_irq_handler+0x40/0xf0
...
[    2.598921]  start_kernel+0x338/0x42c

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Fixes: ee0bcaff109f ("ASoC: mediatek: Add AFE platform driver")
Link: https://lore.kernel.org/r/20221128-mt8173-afe-v1-0-70728221628f@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix double free on tx path.

[ Upstream commit 0473cbae2137b963bd0eaa74336131cb1d3bc6c3 ]

We see kernel crashes and lockups and KASAN errors related to ax210
firmware crashes.  One of the KASAN dumps pointed at the tx path,
and it appears there is indeed a way to double-free an skb.

If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the
method will be freed.  But, in case where we build TSO skb buffer,
the skb may also be freed in error case.  So, return 0 in that particular
error case and do cleanup manually.

BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000000 | tsf hi
Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650

CPU: 4 PID: 9650 Comm: btserver Tainted: G        W         5.19.8+ #5
iwlwifi 0000:06:00.0: 0x00000000 | time gp1
Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x6d
print_report.cold.12+0xf2/0x684
iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2
? __list_del_entry_valid+0x12/0x90
kasan_report+0x8b/0x180
iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type
? __list_del_entry_valid+0x12/0x90
__list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000048 | uCode version major
tcp_update_skb_after_send+0x5d/0x170
__tcp_transmit_skb+0xb61/0x15c0
iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor
? __tcp_select_window+0x490/0x490
iwlwifi 0000:06:00.0: 0x00000420 | hw version
? trace_kmalloc_node+0x29/0xd0
? __kmalloc_node_track_caller+0x12a/0x260
? memset+0x1f/0x40
? __build_skb_around+0x125/0x150
? __alloc_skb+0x1d4/0x220
? skb_zerocopy_clone+0x55/0x230
iwlwifi 0000:06:00.0: 0x00489002 | board version
? kmalloc_reserve+0x80/0x80
? rcu_read_lock_bh_held+0x60/0xb0
tcp_write_xmit+0x3f1/0x24d0
iwlwifi 0000:06:00.0: 0x034E001C | hcmd
? __check_object_size+0x180/0x350
iwlwifi 0000:06:00.0: 0x24020000 | isr0
tcp_sendmsg_locked+0x8a9/0x1520
iwlwifi 0000:06:00.0: 0x01400000 | isr1
? tcp_sendpage+0x50/0x50
iwlwifi 0000:06:00.0: 0x48F0000A | isr2
? lock_release+0xb9/0x400
? tcp_sendmsg+0x14/0x40
iwlwifi 0000:06:00.0: 0x00C3080C | isr3
? lock_downgrade+0x390/0x390
? do_raw_spin_lock+0x114/0x1d0
iwlwifi 0000:06:00.0: 0x00200000 | isr4
? rwlock_bug.part.2+0x50/0x50
iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id
? rwlock_bug.part.2+0x50/0x50
? lockdep_hardirqs_on_prepare+0xe/0x200
iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event
? __local_bh_enable_ip+0x87/0xe0
? inet_send_prepare+0x220/0x220
iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration
__sys_sendto+0x19d/0x250
iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid
? __ia32_sys_getpeername+0x40/0x40
iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_sched_held+0x5a/0xd0
? lock_release+0xb9/0x400
? lock_downgrade+0x390/0x390
? ktime_get+0x64/0x130
? ktime_get+0x8d/0x130
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_bh_held+0xb0/0xb0
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f1d126e4531
Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89
RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531
RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014
RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000010
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
</TASK>

Allocated by task 9650:
kasan_save_stack+0x1c/0x40
__kasan_slab_alloc+0x6d/0x90
kmem_cache_alloc_node+0xf3/0x2b0
__alloc_skb+0x191/0x220
tcp_stream_alloc_skb+0x3f/0x330
tcp_sendmsg_locked+0x67c/0x1520
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
__sys_sendto+0x19d/0x250
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 9650:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x102/0x170
kmem_cache_free+0xc8/0x3e0
iwl_mvm_mac_itxq_xmit+0x124/0x270 [iwlmvm]
ieee80211_queue_skb+0x874/0xd10 [mac80211]
ieee80211_xmit_fast+0xf80/0x1180 [mac80211]
__ieee80211_subif_start_xmit+0x287/0x680 [mac80211]
ieee80211_subif_start_xmit+0xcd/0x730 [mac80211]
dev_hard_start_xmit+0xf6/0x420
__dev_queue_xmit+0x165b/0x1b50
ip_finish_output2+0x66e/0xfb0
__ip_finish_output+0x487/0x6d0
ip_output+0x11c/0x350
__ip_queue_xmit+0x36b/0x9d0
__tcp_transmit_skb+0xb35/0x15c0
tcp_write_xmit+0x3f1/0x24d0
tcp_sendmsg_locked+0x8a9/0x1520
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
__sys_sendto+0x19d/0x250
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0

The buggy address belongs to the object at ffff88813cfa4b40
which belongs to the cache skbuff_fclone_cache of size 472
The buggy address is located 96 bytes inside of
472-byte region [ffff88813cfa4b40, ffff88813cfa4d18)

The buggy address belongs to the physical page:
page:ffffea0004f3e900 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813cfa6c40 pfn:0x13cfa4
head:ffffea0004f3e900 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x5fff8000010200(slab|head|node=0|zone=2|lastcpupid=0x3fff)
raw: 005fff8000010200 ffffea0004656b08 ffffea0008e8cf08 ffff8881081a5240
raw: ffff88813cfa6c40 0000000000170015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88813cfa4a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88813cfa4b00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff88813cfa4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                               ^
ffff88813cfa4c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88813cfa4c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code")
Link: https://lore.kernel.org/linux-wireless/20220928193057.16132-1-greearb@candelatech.com/
Tested-by: Amol Jawale <amol.jawale@candelatech.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20221123225313.21b1ee31d666.I3b3ba184433dd2a544d91eeeda29b467021824ae@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtl8xxxu: Fix use after rcu_read_unlock in rtl8xxxu_bss_info_changed

[ Upstream commit 7927afb5e27baac694f585b59c436ba323528dc2 ]

Commit a8b5aef2cca1 ("wifi: rtl8xxxu: gen2: Enable 40 MHz channel width")
introduced a line where the pointer returned by ieee80211_find_sta() is
used after rcu_read_unlock().

Move rcu_read_unlock() a bit lower to fix this.

Fixes: a8b5aef2cca1 ("wifi: rtl8xxxu: gen2: Enable 40 MHz channel width")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3c82ad09-7593-3be1-1d2c-e58505fb43cb@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: plfxlc: fix potential memory leak in __lf_x_usb_enable_rx()

[ Upstream commit 895b3b06efc285c1245242e9638b9ae251dc13ec ]

urbs does not be freed in exception paths in __lf_x_usb_enable_rx().
That will trigger memory leak. To fix it, add kfree() for urbs within
"error" label. Compile tested only.

Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221119051900.1192401-1-william.xuanziyang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: asihpi: fix missing pci_disable_device()

[ Upstream commit 9d86515c3d4c0564a0c31a2df87d735353a1971e ]

pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release().

Fixes: 3285ea10e9b0 ("ALSA: asihpi - Interrelated HPI tidy up.")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221126021429.3029562-1-liushixin2@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Fix an Oops in nfs_d_automount()

[ Upstream commit 35e3b6ae84935d0d7ff76cbdaa83411b0ad5e471 ]

When mounting from a NFSv4 referral, path->dentry can end up being a
negative dentry, so derive the struct nfs_server from the dentry
itself instead.

Fixes: 2b0143b5c986 ("VFS: normal filesystems (and lustre): d_inode() annotations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn

[ Upstream commit 51069e4aef6257b0454057359faed0ab0c9af083 ]

If we're asked to recover open state while a delegation return is
outstanding, then the state manager thread cannot use a cached open, so
if the server returns a delegation, we can end up deadlocked behind the
pending delegreturn.
To avoid this problem, let's just ask the server not to give us a
delegation unless we're explicitly reclaiming one.

Fixes: be36e185bd26 ("NFSv4: nfs4_open_recover_helper() must set share access")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix a credential leak in _nfs4_discover_trunking()

[ Upstream commit e83458fce080dc23c25353a1af90bfecf79c7369 ]

Fixes: 4f40a5b55446 ("NFSv4: Add an fattr allocation to _nfs4_discover_trunking()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Fix initialisation of struct nfs4_label

[ Upstream commit c528f70f504434eaff993a5ddd52203a2010d51f ]

The call to nfs4_label_init_security() should return a fully initialised
label.

Fixes: aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Fix a memory stomp in decode_attr_security_label

[ Upstream commit 43c1031f7110967c240cb6e922adcfc4b8899183 ]

We must not change the value of label->len if it is zero, since that
indicates we stored a label.

Fixes: b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Always decode the security label

[ Upstream commit c8a62f440229ae7a10874776344dfcc17d860336 ]

If the server returns a reply that includes a security label, then we
must decode it whether or not we can store the results.

Fixes: 1e2f67da8931 ("NFS: Remove the nfs4_label argument from decode_getattr_*() functions")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding

[ Upstream commit eef7314caf2d73a94b68ba293cd105154d3a664e ]

We need to clear the FATTR4_WORD2_SECURITY_LABEL bitmap flag
irrespective of whether or not the label is too long.

Fixes: aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: fix reading hw revision on db410c platform

[ Upstream commit 5d8c0417ea62fed3cec7f5daed06a20477efeb39 ]

Since the commit commit c6122688f265 ("drm/msm/mdp5: stop overriding
drvdata") reading the MDP5 hw revision on db410c will crash the board
as the MDSS_GDSC is not enabled. Revert a part of the offending commit
(moving rpm enablement) and set priv->kms earlier. This make it possible
to use pm_runtime_get_sync() during read_mdp_hw_revision(), which will
power up both the MDP5 and MDSS devices.

Fixes: c6122688f265 ("drm/msm/mdp5: stop overriding drvdata")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512985/
Link: https://lore.kernel.org/r/20221125000213.252115-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd

[ Upstream commit d067b3378a78c9c3048ac535e31c171b6f5b5846 ]

As the mtk_btcvsd_snd_write and mtk_btcvsd_snd_read may return error,
it should be better to catch the exception.

Fixes: 4bd8597dc36c ("ASoC: mediatek: add btcvsd driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221116030750.40500-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dt-bindings: wcd9335: fix reset line polarity in example

[ Upstream commit 34cb111f8a7b98b5fec809dd194003bca20ef1b2 ]

When resetting the block, the reset line is being driven low and then
high, which means that the line in DTS should be annotated as "active
low".

Fixes: 1877c9fda1b7 ("ASoC: dt-bindings: add dt bindings for wcd9335 audio codec")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-2-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()

[ Upstream commit 7ad4384d53c67672a8720cdc2ef638d7d1710ab8 ]

Add the missing clk_disable_unprepare() before return from
tegra_dc_probe() in the error handling path.

Fixes: f68ba6912bd2 ("drm/tegra: dc: Link DC1 to DC0 on Tegra20")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC

[ Upstream commit f50ebe10f5d8092c37e2bd430c78e03bf38b1e20 ]

Commit 5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7")
which adds mfc v7 support for Exynos3250 and use the same compatible
string as used by Exynos5240 but both the IPs are a bit different in
terms of IP clock.
Add variant driver data based on the new compatible string
"samsung,exynos3250-mfc" for Exynos3250 SoC.

Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: 5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7")
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: Core thread depends on core_list

[ Upstream commit 95bc23513c9188065a22194f9af870376fc38fdd ]

Core thread will continue to work when core_list is not empty, not
depends on lat_list.

Fixes: 365e4ba01df4 ("media: mtk-vcodec: Add work queue for core hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: Setting lat buf to lat_list when lat decode error

[ Upstream commit 12ac20d60213a439d1552382d04aabb905e0b784 ]

Need to set lat buf to lat_list when lat decode error, or lat buffer will
be lost.

Fixes: 5d418351ca8f ("media: mediatek: vcodec: support stateless VP9 decoding")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: Fix h264 set lat buffer error

[ Upstream commit 23d677bd9cdd10323e6d290578bbb0a408f43499 ]

Will set lat buffer to lat_list two times when lat decode timeout for
inner racing mode.

If core thread can't get frame buffer, need to return error value.

Fixes: 59fba9eed5a7 ("media: mediatek: vcodec: support stateless H.264 decoding for mt8192")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: Fix getting NULL pointer for dst buffer

[ Upstream commit d879f770e4d1d5f0d9b692d3a2702f23ee441dbb ]

The driver may can't get v4l2 buffer when lat or core decode timeout,
will lead to crash when call v4l2_m2m_buf_done to set dst buffer
(NULL pointer) done.

Fixes: 7b182b8d9c85 ("media: mediatek: vcodec: Refactor get and put capture buffer flow")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: lock and check m2m_ctx in event handler

[ Upstream commit 1ade3f3f16986cd7c6fce02feede957f03eb8a42 ]

driver needs to cancel vpu before releasing the vpu instance,
so call v4l2_m2m_ctx_release() first,
to handle the redundant event triggered after m2m_ctx is released.

lock and check m2m_ctx in the event handler.

Fixes: 3cd084519c6f ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: cancel vpu before release instance

[ Upstream commit b3dd974af9de342c733492565ad02d7e23372876 ]

Revert "media: amphion: release m2m ctx when releasing vpu instance"
This reverts commit d91d7bc85062309aae6d8064563ddf17947cb6bc.

Call v4l2_m2m_ctx_release() to cancel vpu,
afterwards release the vpu instance.

Fixes: d91d7bc85062 ("media: amphion: release m2m ctx when releasing vpu instance")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: try to wakeup vpu core to avoid failure

[ Upstream commit 082744433f7b96db7214a98202ed96f367684693 ]

firmware should be waked up by start or configure command,
but there is a very small chance that firmware failed to wakeup.
in such case, try to wakeup firmware again by sending a noop command

Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: sun8i-a83t-mipi-csi2: Register async subdev with no sensor attached

[ Upstream commit 614f6e35a9e214c80270ab942bf58d85066a3e34 ]

This allows the device to probe and register its async subdev without
a sensor attached.

The rationale is that the parent driver might otherwise wait for the
subdev to be registered when it should be available (from the fwnode
graph endpoint perspective). This is generally not problematic when
the MIPI CSI-2 bridge is the only device attached to the parent, but
in the case of a CSI controller that can feed from both MIPI CSI-2
and parallel, it would prevent using the parallel sensor due to the
parent waiting for the MIPI CSI-2 subdev to register.

Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: sun6i-mipi-csi2: Register async subdev with no sensor attached

[ Upstream commit 67182951f1dde5a88479cf8befee5f32ea014a49 ]

This allows the device to probe and register its async subdev without
a sensor attached.

The rationale is that the parent driver might otherwise wait for the
subdev to be registered when it should be available (from the fwnode
graph endpoint perspective). This is generally not problematic when
the MIPI CSI-2 bridge is the only device attached to the parent, but
in the case of a CSI controller that can feed from both MIPI CSI-2
and parallel, it would prevent using the parallel sensor due to the
parent waiting for the MIPI CSI-2 subdev to register.

Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: sun8i-a83t-mipi-csi2: Require both pads to be connected for streaming

[ Upstream commit 8985fc724ba89d9b00694304b3f9faf69f4073d0 ]

The bridge needs both its pads connected to be able to stream data.
Enforcing this is useful to produce an error when no sensor is
connected.

Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: sun6i-mipi-csi2: Require both pads to be connected for streaming

[ Upstream commit f042b08b833de3be810f8769d88ca44aeefd7eba ]

The bridge needs both its pads connected to be able to stream data.
Enforcing this is useful to produce an error when no sensor is
connected.

Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/boot: Skip realmode init code when running as Xen PV guest

[ Upstream commit f1e525009493cbd569e7c8dd7d58157855f8658d ]

When running as a Xen PV guest there is no need for setting up the
realmode trampoline, as realmode isn't supported in this environment.

Trying to setup the trampoline has been proven to be problematic in
some cases, especially when trying to debug early boot problems with
Xen requiring to keep the EFI boot-services memory mapped (some
firmware variants seem to claim basically all memory below 1Mb for boot
services).

Introduce new x86_platform_ops operations for that purpose, which can
be set to a NOP by the Xen PV specific kernel boot code.

[ bp: s/call_init_real_mode/do_init_real_mode/ ]

Fixes: 084ee1c641a0 ("x86, realmode: Relocator for realmode code")
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221123114523.3467-1-jgross@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()

[ Upstream commit 0ed554fd769a19ea8464bb83e9ac201002ef74ad ]

Wei Chen reports a kernel bug as blew:

general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded

In az6027_i2c_xfer(), if msg[i].addr is 0x99,
a null-ptr-deref will caused when accessing msg[i].buf.
For msg[i].len is 0 and msg[i].buf is null.

Fix this by checking msg[i].len in az6027_i2c_xfer().

Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com
Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-core: Fix ignored return value in dvb_register_frontend()

[ Upstream commit a574359e2e71ce16be212df3a082ed60a4bd2c5f ]

In dvb_register_frontend(), dvb_register_device() is possible to fail
but its return value is ignored.

It will cause use-after-free when module is removed, because in
dvb_unregister_frontend() it tries to unregister a not registered
device.

BUG: KASAN: use-after-free in dvb_remove_device+0x18b/0x1f0 [dvb_core]
Read of size 4 at addr ffff88800dff4824 by task rmmod/428
CPU: 3 PID: 428 Comm: rmmod
Call Trace:
<TASK>
...
dvb_remove_device+0x18b/0x1f0 [dvb_core]
dvb_unregister_frontend+0x7b/0x130 [dvb_core]
vidtv_bridge_remove+0x6e/0x160 [dvb_vidtv_bridge]
...

Fix this by catching return value of dvb_register_device().
However the fe->refcount can't be put to zero immediately, because
there are still modules calling dvb_frontend_detach() when
dvb_register_frontend() fails.

Link: https://lore.kernel.org/linux-media/20221108033005.169095-1-chenzhongjin@huawei.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: pinconf-generic: add missing of_node_put()

[ Upstream commit 5ead93289815a075d43c415e35c8beafafb801c9 ]

of_node_put() needs to be called when jumping out of the loop, since
for_each_available_child_of_node() will increase the refcount of node.

Fixes: c7289500e29d ("pinctrl: pinconf-generic: scan also referenced phandle node")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Link: https://lore.kernel.org/r/20221125070156.3535855-1-zhangpeng362@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx8mn: fix imx8mn_enet_phy_sels clocks list

[ Upstream commit 2626cf67f20b28446dfc3a5b9493dd535cdb747b ]

According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):

     Clock Root         offset     Source Select (CCM_TARGET_ROOTn[MUX])
        ...              ...                    ...
ENET_PHY_REF_CLK_ROOT  0xAA80            000 - 24M_REF_CLK
                                          001 - SYSTEM_PLL2_DIV20
                                          010 - SYSTEM_PLL2_DIV8
                                          011 - SYSTEM_PLL2_DIV5
                                          100 - SYSTEM_PLL2_DIV2
                                          101 - AUDIO_PLL1_CLK
                                          110 - VIDEO_PLL_CLK
                                          111 - AUDIO_PLL2_CLK
        ...              ...                    ...

while the imx8mn_enet_phy_sels list didn't contained audio_pll1_out for
source select bits 101b.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx8mn: fix imx8mn_sai2_sels clocks list

[ Upstream commit 34d996747a74e3a86990f9f9c48de09159d78edb ]

According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):

     Clock Root     offset     Source Select (CCM_TARGET_ROOTn[MUX])
        ...          ...                    ...
   SAI2_CLK_ROOT    0xA600            000 - 24M_REF_CLK
                                      001 - AUDIO_PLL1_CLK
                                      010 - AUDIO_PLL2_CLK
                                      011 - VIDEO_PLL_CLK
                                      100 - SYSTEM_PLL1_DIV6
                                      110 - EXT_CLK_2
                                      111 - EXT_CLK_3
        ...          ...                    ...

while the imx8mn_sai2_sels list contained clk_ext3 and clk_ext4 for
source select bits 110b and 111b.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: rename video_pll1 to video_pll

[ Upstream commit bedcf9d1dcf88ed38731f0ac9620e5a421e1e9d6 ]

Unlike audio_pll1 and audio_pll2, there is no video_pll2. Further, the
name used in the RM is video_pll. So, let's rename "video_pll1" to
"video_pll" to be consistent with the RM and avoid misunderstandings.

The IMX8MN_VIDEO_PLL1* constants have not been removed to ensure
backward compatibility of the patch.

No functional changes intended.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: replace osc_hdmi with dummy

[ Upstream commit e7fa365ff66f16772dc06b480cd78f858d10856b ]

There is no occurrence of the hdmi oscillator in the reference manual
(document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes
76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is
no entry for the source select bits 101b, which is the setting referenced
by "osc_hdmi".
Fix by renaming "osc_hdmi" with "dummy", a clock which has already been
used for missing source select bits.

Tested on the BSH SystemMaster (SMM) S2 board.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx8mn: rename vpu_pll to m7_alt_pll

[ Upstream commit a429c60baefd95ab43a2ce7f25d5b2d7a2e431df ]

The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.

As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:

     Clock Root     offset     Source Select (CCM_TARGET_ROOTn[MUX])
        ...          ...                    ...
  ARM_M7_CLK_ROOT   0x8080            000 - 24M_REF_CLK
                                      001 - SYSTEM_PLL2_DIV5
      010 - SYSTEM_PLL2_DIV4
      011 - M7_ALT_PLL_CLK
      100 - SYSTEM_PLL1_CLK
      101 - AUDIO_PLL1_CLK
      110 - VIDEO_PLL_CLK
      111 - SYSTEM_PLL3_CLK
        ...          ...                    ...

but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.

So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.

The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.

No functional changes intended.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mt9p031: Drop bogus v4l2_subdev_get_try_crop() call from mt9p031_init_cfg()

[ Upstream commit e208ad015f9310a87b4bb1ba1e4d3e347f391aa4 ]

The mt9p031_init_cfg() already calls __mt9p031_get_pad_crop(), which
correctly calls v4l2_subdev_get_try_crop() on V4L2_SUBDEV_FORMAT_TRY
or returns &mt9p031->crop on V4L2_SUBDEV_FORMAT_ACTIVE. No need to
call v4l2_subdev_get_try_crop() in mt9p031_init_cfg() again in case
of both V4L2_SUBDEV_FORMAT_TRY and V4L2_SUBDEV_FORMAT_ACTIVE.

This also fixes a splat generated by this call since commit
2ba3e38517f5a ("media: v4l: subdev: Fail graciously when getting try data for NULL state")
because v4l2_subdev_get_try_crop() is called with sd_state = NULL
in mt9p031_init_cfg().

Fixes: 69681cd041648 ("media: mt9p031: Move open subdev op init code into init_cfg")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx: imx7-media-csi: Clear BIT_MIPI_DOUBLE_CMPNT for <16b formats

[ Upstream commit cccc08a95ca57624563daafd47df5691e8c38995 ]

Commit 9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for
YUV 1X16") set BIT_MIPI_DOUBLE_CMPNT in the CR18 register for 16-bit YUV
formats in imx7_csi_configure(). The CR18 register is always updated
with read-modify-write cycles, so if a 16-bit YUV format is selected,
the bit will stay set forever, even if the format is changed. Fix it by
clearing the bit at the beginning of the imx7_csi_configure() function.

While at it, swap two of the bits being cleared to match the MSB to LSB
order. This doesn't cause any functional change.

Fixes: 9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for YUV 1X16")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imon: fix a race condition in send_packet()

[ Upstream commit 813ceef062b53d68f296aa3cb944b21a091fabdb ]

The function send_packet() has a race condition as follows:

func send_packet()
{
    // do work
    call usb_submit_urb()
    mutex_unlock()
    wait_for_event_interruptible()  <-- lock gone
    mutex_lock()
}

func vfd_write()
{
    mutex_lock()
    call send_packet()  <- prev call is not completed
    mutex_unlock()
}

When the mutex is unlocked and the function send_packet() waits for the
call to complete, vfd_write() can start another call, which leads to the
"URB submitted while active" warning in usb_submit_urb().
Fix this by removing the mutex_unlock() call in send_packet() and using
mutex_lock_interruptible().

Link: https://syzkaller.appspot.com/bug?id=e378e6a51fbe6c5cc43e34f131cc9a315ef0337e
Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Reported-by: syzbot+0c3cb6dc05fbbdc3ad66@syzkaller.appspotmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vimc: Fix wrong function called when vimc_init() fails

[ Upstream commit f74d3f326d1d5b8951ce263c59a121ecfa65e7c0 ]

In vimc_init(), when platform_driver_register(&vimc_pdrv) fails,
platform_driver_unregister(&vimc_pdrv) is wrongly called rather than
platform_device_unregister(&vimc_pdev), which causes kernel warning:

Unexpected driver unregister!
WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0
RIP: 0010:driver_unregister+0x8f/0xb0
Call Trace:
  <TASK>
  vimc_init+0x7d/0x1000 [vimc]
  do_one_initcall+0xd0/0x4e0
  do_init_module+0x1cf/0x6b0
  load_module+0x65c2/0x7820

Fixes: 4a29b7090749 ("[media] vimc: Subdevices as modules")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8186: Correct I2S shared clocks

[ Upstream commit 248579fc9a4f3bf36e7cfe9f6a354cee0f9848dc ]

In mt8186 platform, I2S2 should be the main I2S port that provide
the clock, on the contrary I2S3 should be the second I2S port that
use this clock.

Fixes: 9986bdaee477 ("ASoC: mediatek: mt8186: Configure shared clocks")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221124023050.4470-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: cleanup and fix dependency of QCOM_COMMON

[ Upstream commit 8d89cf6ff229ff31cd4f73f5b3928564b81fc41e ]

SND_SOC_QCOM_COMMON depends on SOUNDWIRE for some symbols but this
is not explicitly specified using Kconfig depends. On the other hand
SND_SOC_QCOM_COMMON is also directly selected by the sound card
Kconfigs, this could result in various combinations and some symbols
ending up in modules and soundcard that uses those symbols as in-build
driver.

Fix these issues by explicitly specifying the dependencies of
SND_SOC_QCOM_COMMON and also use imply a to select SND_SOC_QCOM_COMMON
so that the symbol is selected based on its dependencies.

Also remove dummy stubs in common.c around CONFIG_SOUNDWIRE

Fixes: 3bd975f3ae0a ("ASoC: qcom: sm8250: move some code to common")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124140351.407506-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: Add checks for devm_kcalloc

[ Upstream commit 1bf5ee979076ceb121ee51c95197d890b1cee7f4 ]

As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.

Fixes: 24caf8d9eb10 ("ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221124140510.63468-1-yuancan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: destroy workqueue when drbd device was freed

[ Upstream commit 8692814b77ca4228a99da8a005de0acf40af6132 ]

A submitter workqueue is dynamically allocated by init_submitter()
called by drbd_create_device(), we should destroy it when this
device is not needed or destroyed.

Fixes: 113fef9e20e0 ("drbd: prepare to queue write requests on a submit worker")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-3-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: remove call to memset before free device/resource/connection

[ Upstream commit 6e7b854e4c1b02dba00760dfa79d8dbf6cce561e ]

This revert c2258ffc56f2 ("drbd: poison free'd device, resource and
connection structs"), add memset is odd here for debugging, there are
some methods to accurately show what happened, such as kdump.

Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 8692814b77ca ("drbd: destroy workqueue when drbd device was freed")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: maps: pxa2xx-flash: fix memory leak in probe

[ Upstream commit 2399401feee27c639addc5b7e6ba519d3ca341bf ]

Free 'info' upon remapping error to avoid a memory leak.

Fixes: e644f7d62894 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
[<miquel.raynal@bootlin.com>: Reword the commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221119073307.22929-1-zhengyongjun3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: core: Fix refcount error in del_mtd_device()

[ Upstream commit 56570bdad5e31c5c538cd6efff5c4510256e1bb4 ]

del_mtd_device() will call of_node_put() to mtd_get_of_node(mtd), which
is mtd->dev.of_node. However, memset(&mtd->dev, 0) is called before
of_node_put(). As the result, of_node_put() won't do anything in
del_mtd_device(), and causes the refcount leak.

del_mtd_device()
    memset(&mtd->dev, 0, sizeof(mtd->dev) # clear mtd->dev
    of_node_put()
        mtd_get_of_node(mtd) # mtd->dev is cleared, can't locate of_node
                             # of_node_put(NULL) won't do anything

Fix the error by caching the pointer of the device_node.

OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry: attach
overlay node /spi/spi-sram@0
CPU: 3 PID: 275 Comm: python3 Tainted: G N 6.1.0-rc3+ #54
    0d8a1edddf51f172ff5226989a7565c6313b08e2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
    dump_stack_lvl+0x67/0x83
    kobject_get+0x155/0x160
    of_node_get+0x1f/0x30
    of_fwnode_get+0x43/0x70
    fwnode_handle_get+0x54/0x80
    fwnode_get_nth_parent+0xc9/0xe0
    fwnode_full_name_string+0x3f/0xa0
    device_node_string+0x30f/0x750
    pointer+0x598/0x7a0
    vsnprintf+0x62d/0x9b0
    ...
    cfs_overlay_release+0x30/0x90
    config_item_release+0xbe/0x1a0
    config_item_put+0x5e/0x80
    configfs_rmdir+0x3bd/0x540
    vfs_rmdir+0x18c/0x320
    do_rmdir+0x198/0x330
    __x64_sys_rmdir+0x2c/0x40
    do_syscall_64+0x37/0x90
    entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 00596576a051 ("mtd: core: clear out unregistered devices a bit more")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
[<miquel.raynal@bootlin.com>: Light reword of the commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221119063915.11108-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: microchip: check for null return of devm_kzalloc()

[ Upstream commit e2e6a217a84d09785848a82599729c9a41566e3a ]

Because of the possible failure of devm_kzalloc(), name might be NULL and
will cause null pointer dereference later.

Therefore, it might be better to check it and directly return -ENOMEM.

Fixes: d39fb172760e ("clk: microchip: add PolarFire SoC fabric clock support")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
[claudiu.beznea: s/refrence/reference/, s/possilble/possible]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221119054858.178629-1-tanghui20@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix link recovery in mode 2 when updelay is nonzero

[ Upstream commit f8a65ab2f3ff7410921ebbf0dc55453102c33c56 ]

Before this change when a bond in mode 2 lost link, all of its slaves
lost link, the bonding device would never recover even after the
expiration of updelay. This change removes the updelay when the bond
currently has no usable links. Conforming to bonding.txt section 13.1
paragraph 4.

Fixes: 41f891004063 ("bonding: ignore updelay param when there is no active slave")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Mount debugfs in setns_by_fd

[ Upstream commit 8ac88eece8009428e2577c345080a458e4507e2f ]

Jiri reports broken test_progs after recent commit 68f8e3d4b916
("selftests/bpf: Make sure zero-len skbs aren't redirectable").
Apparently we don't remount debugfs when we switch back networking namespace.
Let's explicitly mount /sys/kernel/debug.

0: https://lore.kernel.org/bpf/63b85917-a2ea-8e35-620c-808560910819@meta.com/T/#ma66ca9c92e99eee0a25e40f422489b26ee0171c1

Fixes: a30338840fa5 ("selftests/bpf: Move open_netns() and close_netns() into network_helpers.c")
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221123200829.2226254-1-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Make sure zero-len skbs aren't redirectable

[ Upstream commit 68f8e3d4b916531ea3bb8b83e35138cf78f2fce5 ]

LWT_XMIT to test L3 case, TC to test L2 case.

v2:
- s/veth_ifindex/ipip_ifindex/ in two places (Martin)
- add comment about which condition triggers the rejection (Martin)

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 8ac88eece800 ("selftests/bpf: Mount debugfs in setns_by_fd")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/guc: make default_lists const data

[ Upstream commit dfa5e6ef3ccefff9fa8a70d9f5fa6ef6244aa312 ]

The default_lists array should be in rodata.

Fixes: dce2bd542337 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122141616.3469214-1-jani.nikula@intel.com
(cherry picked from commit 8b7f7a9b10b704ba7d73199ff0f01354e0bad7a5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix pci device refcount leak

[ Upstream commit b85e285e3d6352b02947fc1b72303673dfacb0aa ]

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().

So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak.

Fixes: 3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: Fix memory leak in rockchip_clk_register_pll()

[ Upstream commit 739a6a6bbdb793bd57938cb24aa5a6df89983546 ]

If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.

Fixes: 90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123091201.199819-1-xiujianfeng@huawei.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: use kfree_const() to free space conditionally

[ Upstream commit dc8d006d15b623c1d80b90b45d6dcb6e890dad09 ]

Use kfree_const() to free supply_name conditionally in create_regulator()
as supply_name may be allocated from kmalloc() or directly from .rodata
section.

Fixes: 87fe29b61f95 ("regulator: push allocations in create_regulator() outside of lock")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221123034616.3609537-1-bobo.shaobowang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT

[ Upstream commit cf59e1e4c79bf741905484cdb13c130b53576a16 ]

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in sound/core/seq/seq_clientmgr.c:509:22
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
ubsan_epilogue+0xa/0x44
__ubsan_handle_shift_out_of_bounds+0x1e7/0x208
snd_seq_deliver_single_event.constprop.21+0x191/0x2f0
snd_seq_deliver_event+0x1a2/0x350
snd_seq_kernel_client_dispatch+0x8b/0xb0
snd_seq_client_notify_subscription+0x72/0xa0
snd_seq_ioctl_subscribe_port+0x128/0x160
snd_seq_kernel_client_ctl+0xce/0xf0
snd_seq_oss_create_client+0x109/0x15b
alsa_seq_oss_init+0x11c/0x1aa
do_one_initcall+0x80/0x440
kernel_init_freeable+0x370/0x3c3
kernel_init+0x1b/0x190
ret_from_fork+0x1f/0x30
</TASK>

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Link: https://lore.kernel.org/r/20221121111630.3119259-1-zhongbaisong@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT

[ Upstream commit b5172e62458f8e6ff359e5f096044a488db90ac5 ]

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in sound/core/pcm_native.c:2676:21
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
ubsan_epilogue+0xa/0x44
__ubsan_handle_shift_out_of_bounds+0x1e7/0x208
snd_pcm_open_substream+0x9f0/0xa90
snd_pcm_oss_open.part.26+0x313/0x670
snd_pcm_oss_open+0x30/0x40
soundcore_open+0x18b/0x2e0
chrdev_open+0xe2/0x270
do_dentry_open+0x2f7/0x620
path_openat+0xd66/0xe70
do_filp_open+0xe3/0x170
do_sys_openat2+0x357/0x4a0
do_sys_open+0x87/0xd0
do_syscall_64+0x34/0x80

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Link: https://lore.kernel.org/r/20221121110044.3115686-1-zhongbaisong@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: Lock substream before snd_pcm_stop()

[ Upstream commit c30c8f9d51ec24b36e2c65a6307a5c8cbc5a0ebc ]

snd_pcm_stop() shall be called with stream lock held to prevent any
races between nonatomic streaming operations.

Fixes: 2f1f570cd730 ("ASoC: Intel: avs: Coredump and recovery flow")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221116115550.1100398-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: Fix Kconfig dependency

[ Upstream commit e5d4d2b23aed20a7815d1b500dbcd50af1da0023 ]

Commit e4746d94d00c ("ASoC: Intel: Skylake: Introduce HDA codec init and
exit routines") introduced HDA codec init routine which depends on SND_HDA.
Select SND_SOC_HDAC_HDA unconditionally to fix following compile error:
ERROR: modpost: "snd_hda_codec_device_init" [sound/soc/intel/skylake/snd-soc-skl.ko] undefined!

Fixes: e4746d94d00c ("ASoC: Intel: Skylake: Introduce HDA codec init and exit routines")
Reviewed-by: Junxiao Chang <junxiao.chang@intel.com>
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Lili Li <lili.li@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221121104742.1007486-1-lili.li@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw89: fix physts IE page check

[ Upstream commit 9e2f177de1bfb7d891bf38140bda54831ecef30d ]

The index RTW89_PHYSTS_BITMAP_NUM is not a valid physts IE page.
So, fix the check condition.

Fixes: eb4e52b3f38d ("rtw89: fix incorrect channel info during scan")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221118042322.26794-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: k210: call of_node_put()

[ Upstream commit a8acc11643082a706de86a19f1f824712d971984 ]

Since for_each_available_child_of_node() will increase the refcount of
node, we need to call of_node_put() manually when breaking out of the
iteration.

Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221122075853.2496680-1-zhangpeng362@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imxrt1050: fix IMXRT1050_CLK_LCDIF_APB offsets

[ Upstream commit 3095c02f95e537c553e0b30948c2f6c7cbed87ee ]

Fix IMXRT1050_CLK_LCDIF_APB offsets.

Fixes: 7154b046d8f3 ("clk: imx: Add initial support for i.MXRT1050 clock driver")
Cc: Jesse Taube <mr.bossman075@gmail.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117181014.851505-1-giulio.benetti@benettiengineering.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hid-sensor-custom: set fixed size for custom attributes

[ Upstream commit 9d013910df22de91333a0acc81d1dbb115bd76f6 ]

This is no bugfix (so no Fixes: tag is necessary) as it is
taken care of in hid_sensor_custom_add_attributes().

The motivation for this patch is that:
hid_sensor_custom_field.attr_name and
hid_sensor_custom_field.attrs
has the size of HID_CUSTOM_TOTAL_ATTRS and used in same context.

We compare against HID_CUSTOM_TOTAL_ATTRS when
looping through hid_custom_attrs.

We will silent the smatch error:
hid_sensor_custom_add_attributes() error: buffer overflow
'hid_custom_attrs' 8 <= 10

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Move skb->len == 0 checks into __bpf_redirect

[ Upstream commit 114039b342014680911c35bd6b72624180fd669a ]

To avoid potentially breaking existing users.

Both mac/no-mac cases have to be amended; mac_header >= network_header
is not enough (verified with a new test, see next patch).

Fixes: fd1894224407 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx93: correct enet clock

[ Upstream commit 4be5d91b9433f1dc76de485e240ca6aaa2d19f65 ]

Per update Reference Mannual, correct the enet clock parent to
wakeup_axi_root.

Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221028095211.2598312-3-peng.fan@oss.nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx93: unmap anatop base in error handling path

[ Upstream commit bda7b7f396f94d8df89ecacc88f2826908e8762c ]

The anatop base is not unmapped during error handling path, fix it.

Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221028095211.2598312-2-peng.fan@oss.nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c: let RMI devices decide what constitutes wakeup event

[ Upstream commit 9984fbf55b9bd998b4ff66395cbb118020c1effa ]

HID-RMI is special in the sense that it does not carry HID events
directly, but rather uses HID protocol as a wrapper/transport for RMI
protocol. Therefore we should not assume that all data coming from the
device via interrupt is associated with user activity and report wakeup
event indiscriminately, but rather let HID-RMI do that when appropriate.

HID-RMI devices tag responses to the commands issued by the host as
RMI_READ_DATA_REPORT_ID whereas motion and other input events from the
device are tagged as RMI_ATTN_REPORT_ID. Change hid-rmi to report wakeup
events when receiving the latter packets. This allows ChromeOS to
accurately identify wakeup source and make correct decision on the mode
of the resume the system should take ("dark" where the display stays off
vs normal one).

Fixes: d951ae1ce803 ("HID: i2c-hid: Report wakeup events")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Pin the start cgroup in cgroup_iter_seq_init()

[ Upstream commit 1a5160d4d8fe63ba4964cfff4a85831b6af75f2d ]

bpf_iter_attach_cgroup() has already acquired an extra reference for the
start cgroup, but the reference may be released if the iterator link fd
is closed after the creation of iterator fd, and it may lead to
user-after-free problem when reading the iterator fd.

An alternative fix is pinning iterator link when opening iterator,
but it will make iterator link being still visible after the close of
iterator link fd and the behavior is different with other link types, so
just fixing it by acquiring another reference for the start cgroup.

Fixes: d4ccaf58a847 ("bpf: Introduce cgroup iter")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221121073440.1828292-2-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx93: correct the flexspi1 clock setting

[ Upstream commit 62dfdbcc16e767b91ed35d4fc0428c86d4688505 ]

Correct IMX93_CLK_FLEXSPI1_GATE CCGR setting. Otherwise the flexspi
always can't be assigned to a parent clock when dump the clock tree.

Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1666589199-1199-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: Fix the number of bytes for the dummy cycles

[ Upstream commit fdc20370d93e8c6d2f448a539d08c2c064af7694 ]

The number of bytes used by spi_nor_spimem_check_readop() may be
incorrect for the dummy cycles. Since nor->read_dummy is not initialized
before spi_nor_spimem_adjust_hwcaps().

We use both mode and wait state clock cycles instead of nor->read_dummy.

Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol")
Co-developed-by: Bayi Cheng <bayi.cheng@mediatek.com>
Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20221031124633.13189-1-allen-kh.cheng@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: hide jedec_id sysfs attribute if not present

[ Upstream commit 7d388551b6888f3725e6c957f472526b35161a5b ]

Some non-jedec compliant flashes (like the Everspin flashes) don't have
an ID at all. Hide the attribute in this case.

Fixes: 36ac02286265 ("mtd: spi-nor: add initial sysfs support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20220810220654.1297699-2-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Return errno in sk->sk_prot->get_port().

[ Upstream commit 7a7160edf1bfde25422262fb26851cef65f695d3 ]

We assume the correct errno is -EADDRINUSE when sk->sk_prot->get_port()
fails, so some ->get_port() functions return just 1 on failure and the
callers return -EADDRINUSE instead.

However, mptcp_get_port() can return -EINVAL. Let's not ignore the error.

Note the only exception is inet_autobind(), all of whose callers return
-EAGAIN instead.

Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udp: Clean up some functions.

[ Upstream commit 919dfa0b20ae56060dce0436eb710717f8987d18 ]

This patch adds no functional change and cleans up some functions
that the following patches touch around so that we make them tidy
and easy to review/revert. The change is mainly to keep reverse
christmas tree order.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 7a7160edf1bf ("net: Return errno in sk->sk_prot->get_port().")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: fix RSTCTRL_PPE{0,1} definitions

[ Upstream commit ef8c373bd91df3cf70596497da0955d218961ead ]

Fix RSTCTRL_PPE0 and RSTCTRL_PPE1 register mask definitions for
MTK_NETSYS_V2.
Remove duplicated definitions.

Fixes: 160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: videobuf-dma-contig: use dma_mmap_coherent

[ Upstream commit b3dc3f8e49577840dc8ac8a365c5b3da4edb10b8 ]

dma_alloc_coherent does not return a physical address, but a DMA address,
which might be remapped or have an offset. Passing the DMA address to
vm_iomap_memory is thus broken.

Use the proper dma_mmap_coherent helper instead, and stop passing
__GFP_COMP to dma_alloc_coherent, as the memory management inside the
DMA allocator is hidden from the callers and does not require it.

With this the gfp_t argument to __videobuf_dc_alloc can be removed and
hard coded to GFP_KERNEL.

Fixes: a8f3c203e19b ("[media] videobuf-dma-contig: add cache support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: Fix error handling in vpu_driver_init()

[ Upstream commit a95cc6d11aae16a7b2d043b073a40de81bbea689 ]

A problem about modprobe amphion-vpu failed is triggered with the
following log given:

[ 2208.634841] Error: Driver 'amphion-vpu' is already registered, aborting...
modprobe: ERROR: could not insert 'amphion_vpu': Device or resource busy

The reason is that vpu_driver_init() returns vpu_core_driver_init()
directly without checking its return value, if vpu_core_driver_init()
failed, it returns without unregister amphion_vpu_driver, resulting the
amphion-vpu can never be installed later.
A simple call graph is shown as below:

vpu_driver_init()
   platform_driver_register() # register amphion_vpu_driver
   vpu_core_driver_init()
     platform_driver_register()
       driver_register()
         bus_add_driver()
           dev = kzalloc(...) # OOM happened
   # return without unregister amphion_vpu_driver

Fix by unregister amphion_vpu_driver when vpu_core_driver_init() returns
error.

Fixes: b50a64fc54af ("media: amphion: add amphion vpu device driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: ming_qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: exynos4-is: Fix error handling in fimc_md_init()

[ Upstream commit b434422c45282a0573d8123239abc41fa72665d4 ]

A problem about modprobe s5p_fimc failed is triggered with the
following log given:

[  272.075275] Error: Driver 'exynos4-fimc' is already registered, aborting...
modprobe: ERROR: could not insert 's5p_fimc': Device or resource busy

The reason is that fimc_md_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregister fimc_driver, resulting the
s5p_fimc can never be installed later.
A simple call graph is shown as below:

fimc_md_init()
   fimc_register_driver() # register fimc_driver
   platform_driver_register()
     platform_driver_register()
       driver_register()
         bus_add_driver()
           dev = kzalloc(...) # OOM happened
   # return without unregister fimc_driver

Fix by unregister fimc_driver when platform_driver_register() returns
error.

Fixes: d3953223b090 ("[media] s5p-fimc: Add the media device driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: solo6x10: fix possible memory leak in solo_sysfs_init()

[ Upstream commit 7f5866dd96d95b74e439f6ee17b8abd8195179fb ]

If device_register() returns error in solo_sysfs_init(), the
name allocated by dev_set_name() need be freed. As comment of
device_register() says, it should use put_device() to give up
the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().

Fixes: dcae5dacbce5 ("[media] solo6x10: sync to latest code from Bluecherry's git repo")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()

[ Upstream commit ba8d9405935097e296bcf7a942c3a01df0edb865 ]

KASAN reports a use-after-free:
BUG: KASAN: use-after-free in dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core]
Call Trace:
...
dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core]
vidtv_bridge_probe+0x7bf/0xa40 [dvb_vidtv_bridge]
platform_probe+0xb6/0x170
...
Allocated by task 1238:
...
dvb_register_device+0x1a7/0xa70 [dvb_core]
dvb_dmxdev_init+0x2af/0x4a0 [dvb_core]
vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge]
...
Freed by task 1238:
dvb_register_device+0x6d2/0xa70 [dvb_core]
dvb_dmxdev_init+0x2af/0x4a0 [dvb_core]
vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge]
...

It is because the error handling in vidtv_bridge_dvb_init() is wrong.

First, vidtv_bridge_dmx(dev)_init() will clean themselves when fail, but
goto fail_dmx(_dev): calls release functions again, which causes
use-after-free.

Also, in fail_fe, fail_tuner_probe and fail_demod_probe, j = i will cause
out-of-bound when i finished its loop (i == NUM_FE). And the loop
releasing is wrong, although now NUM_FE is 1 so it won't cause problem.

Fix this by correctly releasing everything.

Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: apply vb2_queue_error instead of setting manually

[ Upstream commit 9d175a81e28f260916a0a13f457dd8b940eafb4e ]

vb2_queue_error is help to set the error of vb2_queue,
don't need to set it manually

Fixes: 3cd084519c6f ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: add lock around vdec_g_fmt

[ Upstream commit 8480dd5fb3c82b5887d456b3fbe4201d99231814 ]

the capture format may be changed when
sequence header is parsed,
it may be read and write in the same time,
add lock around vdec_g_fmt to synchronize it

Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: do not overwrite mtu configuration running reset routine

[ Upstream commit b677d6c7a695dad1b02d2e0e428c39b3b344f270 ]

Restore user configured MTU running mtk_hw_init() during tx timeout routine
since it will be overwritten after a hw reset.

Reported-by: Felix Fietkau <nbd@nbd.name>
Fixes: 9ea4d311509f ("net: ethernet: mediatek: add the whole ethernet reset into the reset process")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: acp: Fix possible UAF in acp_dma_open

[ Upstream commit 3420fdb8ae99f0a08d78d2b80f42a71971cf478d ]

Smatch report warning as follows:

sound/soc/amd/acp/acp-platform.c:199 acp_dma_open() warn:
'&stream->list' not removed from list

If snd_pcm_hw_constraint_integer() fails in acp_dma_open(),
stream will be freed, but stream->list will not be removed from
adata->stream_list, then list traversal may cause UAF.

Fix by adding the newly allocated stream to the list once it's fully
initialised.

Fixes: 7929985cfe36 ("ASoC: amd: acp: Initialize list to store acp_stream during pcm_open")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221118030056.3135960-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: elants_i2c - properly handle the reset GPIO when power is off

[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ]

As can be seen in elants_i2c_power_off(), we want the reset GPIO
asserted when power is off. The reset GPIO is active low so we need
the reset line logic low when power is off to avoid leakage.

We have a problem, though, at probe time. At probe time we haven't
powered the regulators on yet but we have:

devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);

While that _looks_ right, it turns out that it's not. The
GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the
GPIO to "not asserted". Since this is an active low GPIO that inits it
to be high.

Let's fix this to properly init the GPIO. Now after both probe and
power off the state of the GPIO is consistent (it's "asserted" or
level low).

Once we fix this, we can see that at power on time we no longer to
assert the reset GPIO as the first thing. The reset GPIO is _always_
asserted before powering on. Let's fix powering on to account for
this.

Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: lpddr2_nvm: Fix possible null-ptr-deref

[ Upstream commit 6bdd45d795adf9e73b38ced5e7f750cd199499ff ]

It will cause null-ptr-deref when resource_size(add_range) invoked,
if platform_get_resource() returns NULL.

Fixes: 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221114090240.244172-1-tanghui20@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a6xx: Fix speed-bin detection vs probe-defer

[ Upstream commit f6d1918794ef92b4e26b80c3d40365347b76b1fd ]

If we get an error (other than -ENOENT) we need to propagate that up the
stack. Otherwise if the nvmem driver hasn't probed yet, we'll end up
end up claiming that we support all the OPPs which is not likely to be
true (and on some generations impossible to be true, ie. if there are
conflicting OPPs).

v2: Update commit msg, gc unused label, etc
v3: Add previously missing \n's

Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511690/
Link: https://lore.kernel.org/r/20221115154637.1613968-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath10k: Fix return value in ath10k_pci_init()

[ Upstream commit 2af7749047d8d6ad43feff69f555a13a6a6c2831 ]

This driver is attempting to register to support two different buses.
if either of these is successful then ath10k_pci_init() should return 0
so that hardware attached to the successful bus can be probed and
supported. only if both of these are unsuccessful should ath10k_pci_init()
return an errno.

Fixes: 0b523ced9a3c ("ath10k: add basic skeleton to support ahb")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221110061926.18163-1-xiujianfeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: fix memory leak of lsm_cgroup

[ Upstream commit c453e64cbc9532c0c2edfa999c35d29dad16b8bb ]

kmemleak reports this issue:

unreferenced object 0xffff88810b7835c0 (size 32):
  comm "test_progs", pid 270, jiffies 4294969007 (age 1621.315s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    03 00 00 00 03 00 00 00 0f 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000376cdeab>] kmalloc_trace+0x27/0x110
    [<000000003bcdb3b6>] selinux_sk_alloc_security+0x66/0x110
    [<000000003959008f>] security_sk_alloc+0x47/0x80
    [<00000000e7bc6668>] sk_prot_alloc+0xbd/0x1a0
    [<0000000002d6343a>] sk_alloc+0x3b/0x940
    [<000000009812a46d>] unix_create1+0x8f/0x3d0
    [<000000005ed0976b>] unix_create+0xa1/0x150
    [<0000000086a1d27f>] __sock_create+0x233/0x4a0
    [<00000000cffe3a73>] __sys_socket_create.part.0+0xaa/0x110
    [<0000000007c63f20>] __sys_socket+0x49/0xf0
    [<00000000b08753c8>] __x64_sys_socket+0x42/0x50
    [<00000000b56e26b3>] do_syscall_64+0x3b/0x90
    [<000000009b4871b8>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

The issue occurs in the following scenarios:

unix_create1()
  sk_alloc()
    sk_prot_alloc()
      security_sk_alloc()
        call_int_hook()
          hlist_for_each_entry()
            entry1->hook.sk_alloc_security
            <-- selinux_sk_alloc_security() succeeded,
            <-- sk->security alloced here.
            entry2->hook.sk_alloc_security
            <-- bpf_lsm_sk_alloc_security() failed
      goto out_free;
        ...    <-- the sk->security not freed, memleak

The core problem is that the LSM is not yet fully stacked (work is
actively going on in this space) which means that some LSM hooks do
not support multiple LSMs at the same time. To fix, skip the
"EPERM" test when it runs in the environments that already have
non-bpf lsms installed

Fixes: dca85aac8895 ("selftests/bpf: lsm_cgroup functional test")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Cc: Stanislav Fomichev <sdf@google.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/1668482980-16163-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: track per-add_disk holder relations in DM

[ Upstream commit 1a581b72169968f4154b5793828f3bc28b258b35 ]

dm is a bit special in that it opens the underlying devices.  Commit
89f871af1b26 ("dm: delay registering the gendisk") tried to accommodate
that by allowing to add the holder to the list before add_gendisk and
then just add them to sysfs once add_disk is called.  But that leads to
really odd lifetime problems and error handling problems as we can't
know the state of the kobjects and don't unwind properly.  To fix this
switch to just registering all existing table_devices with the holder
code right after add_disk, and remove them before calling del_gendisk.

Fixes: 89f871af1b26 ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>