mpt3sas: Fix resume on WarpDrive flash cards

mpt3sas crashes on resume after suspend with WarpDrive flash cards.  The
reply_post_host_index array is not set back up after the resume, and we
deference a stale pointer in _base_interrupt().

[   47.309711] BUG: unable to handle kernel paging request at ffffc90001f8006c
[   47.318289] IP: [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas]
[   47.326749] PGD 41ccaa067 PUD 41ccab067 PMD 3466c067 PTE 0
[   47.333848] Oops: 0002 [#1] SMP
...
[   47.452708] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.7.0 #6
[   47.460506] Hardware name: Dell Inc. OptiPlex 990/06D7TR, BIOS A18 09/24/2013
[   47.469629] task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000
[   47.479112] RIP: 0010:[<ffffffffc00863ef>]  [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas]
[   47.490466] RSP: 0018:ffff88041d203e30  EFLAGS: 00010002
[   47.497801] RAX: 0000000000000001 RBX: ffff880033f4c000 RCX: 0000000000000001
[   47.506973] RDX: ffffc90001f8006c RSI: 0000000000000082 RDI: 0000000000000082
[   47.516141] RBP: ffff88041d203eb0 R08: ffff8804118e2820 R09: 0000000000000001
[   47.525300] R10: 0000000000000001 R11: 00000000100c0000 R12: 0000000000000000
[   47.534457] R13: ffff880412c487e0 R14: ffff88041a8987d8 R15: 0000000000000001
[   47.543632] FS:  0000000000000000(0000) GS:ffff88041d200000(0000) knlGS:0000000000000000
[   47.553796] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   47.561632] CR2: ffffc90001f8006c CR3: 0000000001c06000 CR4: 00000000000406f0
[   47.570883] Stack:
[   47.575015]  000000001d211228 ffff88041d2100c0 ffff8800c47d8130 0000000000000100
[   47.584625]  ffff8804100c0000 100c000000000000 ffff88041a8992a0 ffff88041a8987f8
[   47.594230]  ffff88041d203e00 ffffffff81111e55 000000000000038c ffff880414ad4280
[   47.603862] Call Trace:
[   47.608474]  <IRQ>
[   47.610413]  [<ffffffff81111e55>] ? call_timer_fn+0x35/0x120
[   47.620539]  [<ffffffff81100a1f>] handle_irq_event_percpu+0x7f/0x1c0
[   47.629061]  [<ffffffff81100b8c>] handle_irq_event+0x2c/0x50
[   47.636859]  [<ffffffff81103fff>] handle_edge_irq+0x6f/0x130
[   47.644654]  [<ffffffff8102fbf3>] handle_irq+0x73/0x120
[   47.652011]  [<ffffffff810c6ada>] ? atomic_notifier_call_chain+0x1a/0x20
[   47.660854]  [<ffffffff817e374b>] do_IRQ+0x4b/0xd0
[   47.667777]  [<ffffffff817e160c>] common_interrupt+0x8c/0x8c
[   47.675635]  <EOI>

Move the reply_post_host_index array setup into
mpt3sas_base_map_resources(), which is also in the resume path.

Cc: stable@vger.kernel.org
Signed-off-by: Greg Edwards <gedwards@fireweed.org>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ipr: Fix sync scsi scan

Commit b195d5e2bffd ("ipr: Wait to do async scan until scsi host is
initialized") fixed async scan for ipr, but broke sync scan. This fixes
sync scan back up.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

megaraid_sas: Fix probing cards without io port

Found one megaraid_sas HBA probe fails,

[  187.235190] scsi host2: Avago SAS based MegaRAID driver
[  191.112365] megaraid_sas 0000:89:00.0: BAR 0: can't reserve [io  0x0000-0x00ff]
[  191.120548] megaraid_sas 0000:89:00.0: IO memory region busy!

and the card has resource like,
[  125.097714] pci 0000:89:00.0: [1000:005d] type 00 class 0x010400
[  125.104446] pci 0000:89:00.0: reg 0x10: [io  0x0000-0x00ff]
[  125.110686] pci 0000:89:00.0: reg 0x14: [mem 0xce400000-0xce40ffff 64bit]
[  125.118286] pci 0000:89:00.0: reg 0x1c: [mem 0xce300000-0xce3fffff 64bit]
[  125.125891] pci 0000:89:00.0: reg 0x30: [mem 0xce200000-0xce2fffff pref]

that does not io port resource allocated from BIOS, and kernel can not
assign one as io port shortage.

The driver is only looking for MEM, and should not fail.

It turns out megasas_init_fw() etc are using bar index as mask.  index 1
is used as mask 1, so that pci_request_selected_regions() is trying to
request BAR0 instead of BAR1.

Fix all related reference.

Fixes: b6d5d8808b4c ("megaraid_sas: Use lowest memory bar for SR-IOV VF support")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

aacraid: Check size values after double-fetch from user

In aacraid's ioctl_send_fib() we do two fetches from userspace, one the
get the fib header's size and one for the fib itself. Later we use the
size field from the second fetch to further process the fib. If for some
reason the size from the second fetch is different than from the first
fix, we may encounter an out-of- bounds access in aac_fib_send(). We
also check the sender size to insure it is not out of bounds. This was
reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was
assigned CVE-2016-6480.

Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Fixes: 7c00ffa31 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)'
Cc: stable@vger.kernel.org
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: Use kfree_skb() instead of kfree()

Use kfree_skb() instead of kfree() to free sk_buff.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ipr: Fix error return code in ipr_probe_ioa()

Fix to return error code -ENOMEM from the workqueue alloc error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: add missing destroy_workqueue() on error in fcoe_init()

Add the missing destroy_workqueue() before return from fcoe_init() in
the fcoe transport register failed error handling case.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Fix possible NULL pointer dereference

Check for the existence of piocb->vport before accessing it.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: Use default VLAN for FIP VLAN discovery

FC-BB-6 states: FIP protocols shall be performed on a per-VLAN basis. It
is recommended to use the FIP VLAN discovery protocol on the default
VLAN.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ipr: Wait to do async scan until scsi host is initialized

When performing an async scan, make sure the kthread doing scanning
doesn't start before the scsi host is fully initialized.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

MAINTAINERS: Update cxlflash maintainers

Adding myself as a cxlflash maintainer.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

cxlflash: Verify problem state area is mapped before notifying shutdown

If an EEH or some other hard error occurs while the adapter instance was
being initialized, on the subsequent shutdown of the device, the system
could crash with:

[c000000f1da03b60] c0000000005eccfc pci_device_shutdown+0x6c/0x100
[c000000f1da03ba0] c0000000006d67d4 device_shutdown+0x1b4/0x2c0
[c000000f1da03c40] c0000000000ea30c kernel_restart_prepare+0x5c/0x80
[c000000f1da03c70] c0000000000ea48c kernel_restart+0x2c/0xc0
[c000000f1da03ce0] c0000000000ea970 SyS_reboot+0x1c0/0x2d0
[c000000f1da03e30] c000000000009204 system_call+0x38/0xb4

This crash is due to the AFU not being mapped when the shutdown
notification routine is called and is a regression that was inserted
recently with Commit 704c4b0ddc03 ("cxlflash: Shutdown notify support
for CXL Flash cards").

As a fix, shutdown notification should only occur when the AFU is
mapped.

Fixes: 704c4b0ddc03 ("cxlflash: Shutdown notify support for CXL Flash cards")
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()

The lpfc_sli4_scmd_to_wqidx_distr() function expects the scsi_cmnd
'lpfc_cmd->pCmd' not to be null, and point to the midlayer command.

That's not true in the .eh_(device|target|bus)_reset_handler path,
because lpfc_send_taskmgmt() sends commands not from the midlayer, so
does not set 'lpfc_cmd->pCmd'.

That is true in the .queuecommand path because lpfc_queuecommand()
stores the scsi_cmnd from midlayer in lpfc_cmd->pCmd; and lpfc_cmd is
stored by lpfc_scsi_prep_cmnd() in piocbq->context1 -- which is passed
to lpfc_sli4_scmd_to_wqidx_distr() as lpfc_cmd parameter.

This problem can be hit on SCSI EH, and immediately with sg_reset.
These 2 test-cases demonstrate the problem/fix with next-20160601.

Test-case 1) sg_reset

    # strace sg_reset --device /dev/sdm
    <...>
    open("/dev/sdm", O_RDWR|O_NONBLOCK)     = 3
    ioctl(3, SG_SCSI_RESET, 0x3fffde6d0994 <unfinished ...>
    +++ killed by SIGSEGV +++
    Segmentation fault

    # dmesg
    Unable to handle kernel paging request for data at address 0x00000000
    Faulting instruction address: 0xd00000001c88442c
    Oops: Kernel access of bad area, sig: 11 [#1]
    <...>
    CPU: 104 PID: 16333 Comm: sg_reset Tainted: G        W       4.7.0-rc1-next-20160601-00004-g95b89dc #6
    <...>
    NIP [d00000001c88442c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc]
    LR [d00000001c826fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc]
    Call Trace:
    [c000003c9ec876f0] [c000003c9ec87770] 0xc000003c9ec87770 (unreliable)
    [c000003c9ec87720] [d00000001c82e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc]
    [c000003c9ec87780] [d00000001c831a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc]
    [c000003c9ec87880] [d00000001c87f27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc]
    [c000003c9ec87950] [d00000001c87fd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc]
    [c000003c9ec87a10] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0
    [c000003c9ec87a40] [c0000000006113e8] scsi_ioctl_reset+0x198/0x2c0
    [c000003c9ec87bf0] [c00000000060fe5c] scsi_ioctl+0x13c/0x4b0
    [c000003c9ec87c80] [c0000000006629b0] sd_ioctl+0xf0/0x120
    [c000003c9ec87cd0] [c00000000046e4f8] blkdev_ioctl+0x248/0xb70
    [c000003c9ec87d30] [c0000000002a1f60] block_ioctl+0x70/0x90
    [c000003c9ec87d50] [c00000000026d334] do_vfs_ioctl+0xc4/0x890
    [c000003c9ec87de0] [c00000000026db60] SyS_ioctl+0x60/0xc0
    [c000003c9ec87e30] [c000000000009120] system_call+0x38/0x108
    Instruction dump:
    <...>

    With fix:

    # strace sg_reset --device /dev/sdm
    <...>
    open("/dev/sdm", O_RDWR|O_NONBLOCK)     = 3
    ioctl(3, SG_SCSI_RESET, 0x3fffe103c554) = 0
    close(3)                                = 0
    exit_group(0)                           = ?
    +++ exited with 0 +++

    # dmesg
    [  424.658649] lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (1, 0) return x2002

Test-case 2) SCSI EH

    Using this debug patch to wire an SCSI EH trigger, for lpfc_scsi_cmd_iocb_cmpl():
    -       cmd->scsi_done(cmd);
    +       if ((phba->pport ? phba->pport->cfg_log_verbose : phba->cfg_log_verbose) == 0x32100000)
    +               printk(KERN_ALERT "lpfc: skip scsi_done()\n");
    +       else
    +               cmd->scsi_done(cmd);

    # echo 0x32100000 > /sys/class/scsi_host/host11/lpfc_log_verbose

    # dd if=/dev/sdm of=/dev/null iflag=direct &
    <...>

    After a while:

    # dmesg
    lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000)
    lpfc: skip scsi_done()
    <...>
    Unable to handle kernel paging request for data at address 0x00000000
    Faulting instruction address: 0xd0000000199e448c
    Oops: Kernel access of bad area, sig: 11 [#1]
    <...>
    CPU: 96 PID: 28556 Comm: scsi_eh_11 Tainted: G        W       4.7.0-rc1-next-20160601-00004-g95b89dc #6
    <...>
    NIP [d0000000199e448c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc]
    LR [d000000019986fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc]
    Call Trace:
    [c000000ff0d0b890] [c000000ff0d0b900] 0xc000000ff0d0b900 (unreliable)
    [c000000ff0d0b8c0] [d00000001998e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc]
    [c000000ff0d0b920] [d000000019991a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc]
    [c000000ff0d0ba20] [d0000000199df27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc]
    [c000000ff0d0baf0] [d0000000199dfd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc]
    [c000000ff0d0bbb0] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0
    [c000000ff0d0bbe0] [c0000000006126cc] scsi_eh_ready_devs+0x49c/0x9c0
    [c000000ff0d0bcb0] [c000000000614160] scsi_error_handler+0x580/0x680
    [c000000ff0d0bd80] [c0000000000ae848] kthread+0x108/0x130
    [c000000ff0d0be30] [c0000000000094a8] ret_from_kernel_thread+0x5c/0xb4
    Instruction dump:
    <...>

    With fix:

    # dmesg
    lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000)
    lpfc: skip scsi_done()
    <...>
    lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (0, 0) return x2002
    <...>
    lpfc 0006:01:00.4: 4:(0):0723 SCSI layer issued Target Reset (1, 0) return x2002
    <...>
    lpfc 0006:01:00.4: 4:(0):0714 SCSI layer issued Bus Reset Data: x2002
    <...>
    lpfc 0006:01:00.4: 4:(0):3172 SCSI layer issued Host Reset Data:
    <...>

Fixes: 8b0dff14164d ("lpfc: Add support for using block multi-queue")
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi:libsas: fix oops caused by assigning a freed task to ->lldd_task

A freed task has been assigned to ->lldd_task when lldd_execute_task()
failed in sas_ata_qc_issue(), and access of ->lldd_task will cause an
oops:

Call trace:
[<ffffffc000641f64>] sas_ata_post_internal+0x6c/0x150
[<ffffffc0006c0d64>] ata_exec_internal_sg+0x32c/0x588
[<ffffffc0006c1048>] ata_exec_internal+0x88/0xe8
[<ffffffc0006c13b4>] ata_dev_read_id+0x204/0x5e0
[<ffffffc0006c17f0>] ata_dev_reread_id+0x60/0xc8
[<ffffffc0006c3098>] ata_dev_revalidate+0x88/0x1e0
[<ffffffc0006cf828>] ata_eh_recover+0xcf8/0x13a8
[<ffffffc0006d075c>] ata_do_eh+0x5c/0xe0
[<ffffffc0006d0828>] ata_std_error_handler+0x48/0x98
[<ffffffc0006d042c>] ata_scsi_port_error_handler+0x474/0x658
[<ffffffc000641b78>] async_sas_ata_eh+0x50/0x80
[<ffffffc0000ca664>] async_run_entry_fn+0x64/0x180
[<ffffffc0000c085c>] process_one_work+0x164/0x438
[<ffffffc0000c0c74>] worker_thread+0x144/0x4b0
[<ffffffc0000c70fc>] kthread+0xfc/0x110

Fix this by reassigning NULL to ->lldd_task in error path.

Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fnic: pci_dma_mapping_error() doesn't return an error code

pci_dma_mapping_error() returns true on error and false on success.

Fixes: fd6ddfa4c1dd ('fnic: check pci_map_single() return value')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: avoid harmless comparison warning

When building with -Wextra, we get a lot of warnings for the lpfc driver
concerning expressions that are always true, starting with:

drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_enable_npiv_init':
drivers/scsi/lpfc/lpfc_attr.c:2786:77: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_enable_rrq_init':
drivers/scsi/lpfc/lpfc_attr.c:2802:76: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_suppress_link_up_init':
drivers/scsi/lpfc/lpfc_attr.c:2812:2050: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_log_verbose_init':
drivers/scsi/lpfc/lpfc_attr.c:3064:1930: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]

The code works as intended, but it would be nice to shut up the warning
so we don't clutter up build logs with this. Using a separate inline
function for it makes it clear to the compiler that the comparison is
necessary in the caller but still lets it do the constant-folding.

[mkp: fix typo]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: implement FIP VLAN responder

When running in VN2VN mode there is no central instance which would send
out any FIP VLAN discovery notifications. So this patch adds a new sysfs
attribute 'fip_vlan_responder' which will activate a FIP VLAN discovery
responder.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: Rename 'fip_frame' to 'fip_vn2vn_notify_frame'

Do not use a generic name to avoid confusions with other usages.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: call lpfc_sli_validate_fcp_iocb() with the hbalock held

Call lpfc_sli_validate_fcp_iocb() with the hbalock held, as the pointer
to iocbq is not guaranteed to still be valid after looking it up.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: remove unnecessary goto label

When buff_ascii kmalloc failed, there is no need to call kfree, it
should return -ENOMEM directly, this patch fixes it.

Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

hpsa: change hpsa_passthru_ioctl timeout

Was not alloting for FW Flash times.

Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

hpsa: correct skipping masked peripherals

The SA controller spins down RAID drive spares.

A REGNEWD event causes an inquiry to be sent to all physical
drives. This causes the SA controller to spin up the spare.

The controller suspends all I/O to a logical volume until
the spare is spun up. The spin-up can take over 50 seconds.

This can result in one or both of the following:
 - SML sends down aborts and resets to the logical volume
   and can cause the logical volume to be off-lined.
 - a negative impact on the logical volume's I/O performance
   each time a REGNEWD is triggered.

Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Update driver version to 8.07.00.38-k

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Fix BBCR offset

Fixes: 969a619 ("qla2xxx: Add support for buffer to buffer credit value for ISP27XX.")
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Fix duplicate message id.

Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Disable the adapter and skip error recovery in case of register disconnect.

If there is error recovery going on due to command timeout and
there is register disconnect, then disable the adapter.

Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Separate ISP type bits out from device type.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Correction to function qla26xx_dport_diagnostics().

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Add support to handle Loop Init error Asynchronus event.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Let DPORT be enabled purely by nvram.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Add bsg interface to support statistics counter reset.

[mkp: Folded in compile fix]

Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Add bsg interface to support D_Port Diagnostics.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Check for device state before unloading the driver.

During hot swap of PCI device, there can be PCI error on device,
during normal driver unload. The race between normal driver unload and
driver unload due to PCI error, can lead to system crash.Fix is to check
if there is unload going on and allow that function to unload the driver.

Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Properly reset firmware statistics.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Properly initialize IO statistics.

Properly initialize IO statistics to avoid initial 0xFFFFFFF (-1) values.

Cleanup/simplify usage of pointer to statistics structure.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Make debug buffer log easier to view.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Add module parameter alternate/short names.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Set FLOGI retry in additional firmware options for P2P (N2N) mode.

When VP decoupling enabled, there could be a window where, FLOGI from initiators
can be dropped before VP0 is enabled, causing link level recovery.
Retry FLOGI to avoid link level recovery.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Shutdown board on thermal shutdown aen.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Add ram area DDR for fwdump template entry T262.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: Remove sysfs node fw_dump_template.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Update lpfc version to 11.2.0.0

Update lpfc version to 11.2.0.0

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Copyright updates

Copyright updates

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Disable FDMI probing if not connected to a fabric

Disable FDMI probing if not connected to a fabric

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Correct issue with ioremap() call on 32bit kernel

Correct issue with ioremap() call on 32bit kernel

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Re-organize source for easier driver attribute management

Re-organize source for easier driver attribute management

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Remove global lpfc_sli_mode attribute in leiu of per-hba lpfc_sli_mode

Remove global lpfc_sli_mode attribute in leiu of per-hba lpfc_sli_mode

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Remove global lpfc_delay_discovery attribute in leiu of per-hba lpfc_delay_discovery

Remove global lpfc_delay_discovery attribute in leiu of per-hba
lpfc_delay_discovery

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Remove global lpfc_enable_npiv attribute in leiu of per-hba lpfc_enable_npiv

Remove global lpfc_enable_npiv attribute in leiu of per-hba lpfc_enable_npiv

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Correct Port reset resulting in FC port going offline

Correct Port reset resulting in FC port going offline

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Add support for XLane LUN priority

Add support for XLane LUN priority

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Correct RDP response Revision location

Correct RDP response Revision location

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Re-organize source for easier device-id management

Re-organize source for easier device-id management

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Correct FCOE discovery to avoid loss of storage devices after system reboot

Correct FCOE discovery to avoid loss of storage devices after system reboot

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Fix SLI mode 2 config failure

Fix SLI mode 2 config failure

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Add MDS Diagnostics Support

Add MDS Diagnostics Support

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Add sysfs proc_name support

Add sysfs proc_name support

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Reject RDP ELS if port has no login

Reject RDP ELS if port has no login

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Correct Buffer credit descriptor values in RDP response

Correct Buffer credit descriptor values in RDP response

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Add recovery from adapter parity errors on some SLI4 adapters

Add recovery from adapter parity errors on some SLI4 adapters

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Correct RDP response sizing issue

Correct RDP response sizing issue

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc: Fix Transgression Flag of Optical Element descriptor for RDP on Linux

Fix Transgression Flag of Optical Element descriptor for RDP on Linux

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ibmvfc: prevent a potential deadlock

My static checker complains that we need to unlock on this path.  Seems
true.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

usb: MAINTAINERS: Oliver Neukum is the new uas maintainer

Oliver Neukum is taking over uas maintainership from me and Gerd
Hoffmann.

Cc: Oliver Neukum <oneukum@suse.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: remove the disable_blk_mq host flag

We've had scsi-mq for 2.5 years now, so we can remove the unused flag to
disable the code on a per-host basis that was put in for unexpected
emergencies during bringup.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: tc-dwc-g210 driver fix for 20-bit RMMI

The code was checking on PA_CONNECTEDRXLANES and PA_CONNECTEDTXLANES
attributes to program the Lane#1 attributes. The correct attributes are
PA_AVAILRXDATALANES and PA_AVAILTXDATALANES respectively.

Signed-off-by: Manjunath M B <manjumb@synopsys.com>
Tested-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

mpt3sas: Fix panic when aer correct error occurred

The _scsih_pci_mmio_enabled called if scsih_pci_error_detected returns
PCI_ERS_RESULT_CAN_RECOVER, at this point, read/write to the device
still works, no need to reset slot.

Or the mpt3sas_base_map_resources in scsih_pci_slot_reset will fail,
and iounamp ioc->chip, then we will meet issue when read ioc->chip
in mpt3sas_base_get_iocstate from _base_fault_reset_work.

Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

qla2xxx: setup data needed in ISR before setting up the ISR

qla2xxx first calls request_irq() and then does the setup of the queue
entry data needed in the interrupt handlers in when using MSI-X. This
could lead to a NULL pointer dereference when an IRQ fires between the
request_irq() call and the assignment of the qentry data structure to
the rsp->msix field. A possible case for such a race would be in the
kdump case when the HBA's IRQs are still enabled but the driver is
undergoing a new initialisation and thus is not aware of already
activated IRQs in the HBA.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ipr: Increase MSIX vectors number

Increase MSIX vectors from 2 to 16 by default.

Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ipr: Add new CCIN for new adapters support

Add the appropriate definitions and table entries for new adapters
support.

Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: remove current_cmnd field from struct scsi_device

The field is only used by the 53c700 driver, so move it into the
driver-private device data instead of having it in the common structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

megaraid_sas: Do not fire MR_DCMD_PD_LIST_QUERY to controllers which do not support it

There was an issue reported by Lucz Geza on Dell Perc 6i. As per issue
reported, megaraid_sas driver goes into an infinite error reporting loop
as soon as there is a change in the status of one of the
arrays (degrade, resync online etc ).  Below are the error logs reported
continuously-

Jun 25 08:49:30 ns8 kernel: [  757.757017] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115
Jun 25 08:49:30 ns8 kernel: [  757.778017] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115
Jun 25 08:49:30 ns8 kernel: [  757.799017] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115
Jun 25 08:49:30 ns8 kernel: [  757.820018] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115
Jun 25 08:49:30 ns8 kernel: [  757.841018] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115

This issue is very much specific to controllers which do not support
DCMD- MR_DCMD_PD_LIST_QUERY.  In case of any hotplugging/rescanning of
drives, AEN thread will be scheduled by driver and fire DCMD-
MR_DCMD_PD_LIST_QUERY and if this DCMD is failed then driver will fail
this event processing and will not go ahead for further events. This
will cause infinite loop of same event getting retried infinitely and
causing above mentioned logs.

Fix for this problem is: not to fire DCMD MR_DCMD_PD_LIST_QUERY for
controllers which do not support it and send DCMD SUCCESS status to AEN
function so that it can go ahead with other event processing.

Reported-by: Lucz Geza <geza@lucz.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: use defines from ethtool for 20Gbit and 40Gbit speeds

Use defines from ethtool for 20Gbit and 40Gbit speeds instead of magic
numbers.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: Update multicast addresses on FIP mode change

When the FIP mode is changed we need to update the multicast addresses
to ensure we get the correct frames.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: fcoe->realdev is always set

'->realdev' is always set, so this check is pointless.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: use enum for fip_mode

The FIP mode is independent on the FIP state machine, so use a separate
enum for that instead of overloading it with state machine values.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fc_fip: Update to latest FC-BB-6 draft

Update to latest FC-BB-6 draft to include FIP VN2VN VLAN notifications
and additional flags.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

libfc: sanity check cpu number extracted from xid

In the receive path libfc extracts a cpu number from the ox_id in the
fiber channel header and uses that to do a per_cpu_ptr conversion.  If,
for some reason, a frame is received with an invalid ox_id, per_cpu_ptr
will return an invalid pointer and the libfc receive path will panic the
system trying to use it.

I'm currently looking at such a case, and I don't yet know why a cpu
number > nr_cpu_ids is appearing in an exchange id.  But adding a sanity
check in libfc prevents a system panic, and seems like good idea when
dealing with frames coming in from the network.

Signed-off-by: Chris Leech <cleech@redhat.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fcoe: convert to kworker

The driver creates its own per-CPU threads which are updated based on
CPU hotplug events. It is also possible to use kworkers and remove some
of the kthread infrastrucure.

The code checked ->thread to decide if there is an active per-CPU
thread. By using the kworker infrastructure this is no longer
possible (or required). The thread pointer is saved in `kthread' instead
of `thread' so anything trying to use thread is caught by the
compiler. Currently only the bnx2fc driver is using struct fcoe_percpu_s
and the kthread member.

After a CPU went offline, we may still enqueue items on the "offline"
CPU. This isn't much of a problem. The work will be done on a random
CPU. The allocated crc_eof_page page won't be cleaned up. It is probably
expected that the CPU comes up at some point so it should not be a
problem. The crc_eof_page memory is released of course once the module
is removed.

This patch was only compile-tested due to -ENODEV.

Cc: Vasu Dev <vasu.dev@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: fcoe-devel@open-fcoe.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

MAINTAINERS: Change FCoE maintainer

Vasu is going to resign from his maintainer role and I'll take over.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

snic: Fix use-after-free in case of a dma mapping error

If there is a dma mapping error snic kfree()s buf right before printing
it.  Change the order to not accidently trip on memory that's not owned
by us anymore.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: wd7000: print sector number as 64-bit

Enabling format checking in dprintk() shows that wd7000_biosparam uses
an incorrect format string for sector_t:

drivers/scsi/wd7000.c: In function 'wd7000_biosparam':
drivers/scsi/wd7000.c:1594:21: error: format '%d' expects argument of type 'int', but argument 3 has type 'sector_t {aka long long unsigned int}' [-Werror=format=]

As sector_t can be 32-bit wide, this adds a cast to 'u64' and prints
that with the correct format. The change to use no_printk() generally
helps with finding this kind of hidden format string bug, and I found
that when building with "-Wextra", which warned about an empty else
clause in

       } else
              dprintk("ok!\n");

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: fix seconds_since_last_reset calculation

The fc_get_host_stats() function contains a complex conversion from
jiffies to timespec to seconds. As we try to get rid of uses of struct
timespec, we can clean this up and replace it with a simpler
computation.

Simply dividing the difference in jiffies by HZ is not only much more
efficient, it also avoids a problem that causes the
seconds_since_last_reset value to be incorrect if jiffies has overrun
since the 'boot_time' value was recorded.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

53c700: Use proper debug printk format specifiers

When enabling the debug options NCR_700_DEBUG and NCR_700_TAG_DEBUG
various printk format warnings can be seen like:
drivers/scsi/53c700.c:357:2: warning: format  %p  expects argument of type  void * , but argument 4 has type  dma_addr_t  [-Wformat=]
  script_patch_32(hostdata->dev, script, MessageLocation,

Fix them by using the right printk format specifiers.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

vmw_pvscsi: Change to update maintainer details (name, email)

[mkp: Updated MAINTAINERS]

Signed-off-by: Jim Gill <jgill@vmware.com>
Acked-by: Arvind Kumar <arvindkumar@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

cxlflash: Shutdown notify support for CXL Flash cards

Some CXL Flash cards need notification of device shutdown in order to
flush pending I/Os.

A PCI notification hook for shutdown has been added where the driver
notifies the card and returns. When the device is removed in the PCI
remove path, notification code will wait for shutdown processing to
complete.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

cxlflash: Add device dependent flags

Device dependent flags are needed to support functions that are specific
to a particular device.

One such case is - some CXL Flash cards need to be notified of device
shutdown. For other CXL devices, this feature does not prove to be
useful yet. Such distinct features need to be identified in the driver
to bypass or invoke specific functionality.

In this patch, a member 'flags' has been added to device dependent
values. These flags will be used and expanded in the future to support
various device specific functions.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

cxlflash: Fix to drain operations from previous reset

While running 'sg_reset -H' in a loop with a user-space application active,
hit the following exception:

cpu 0x2: Vector: 300 (Data Access)
    pc: : afu_attach+0x50/0x240 [cxlflash]
    lr: : cxlflash_afu_recover+0x3dc/0x7d0 [cxlflash]
    pid   = 20365, comm = run_block_fvt

Linux version 4.5.0-491-26f710d+

cxlflash_afu_recover+0x3dc/0x7d0 [cxlflash]
cxlflash_ioctl+0x5a8/0x6f0 [cxlflash]
scsi_ioctl+0x3b0/0x4c0
sd_ioctl+0x110/0x190
blkdev_ioctl+0x28c/0xc20
block_ioctl+0xa4/0xd0
do_vfs_ioctl+0xd8/0x8c0
SyS_ioctl+0xd4/0xf0
system_call+0x38/0xb4

The problem here is that the problem space area is unmapped while the
application issues the DK_CXLFLASH_RECOVER_AFU ioctl.

This is the order I observe:

proc1 proc2
1) sg_reset
2) ioctl(DK_CXLFLASH_RECOVER_AFU)
3) sg_reset again
   causing a PSA unmap
4) continues RECOVER_AFU processing

The resolution to this problem is to have the reset handler drain all
outstanding user space initiated ioctls before proceeding.  It is safe
to drain after the state has been changed to STATE_RESET. Also since
drain_ioctls() was static, it had to be moved up a bit to be before
cxlflash_eh_host_reset_handler().

Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

MAINTAINERS: Update email address for aacraid

Update the email address for aacraid from Adaptec to Microsemi.

Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi_debug: fix sleep in invalid context

In this post: http://www.spinics.net/lists/linux-scsi/msg97124.html the
author shows some kernel infrastructure complaining about a sleep in an
invalid context. Remove offending call to vmalloc().  Instead of using
kzalloc() which reviewers didn't like, use a bucket system (64 bytes on
the stack) and potentially multiple calls to sg_pcopy_from_buffer() to
construct the 'data-in' buffer for the SCSI REPORT LUNS command.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

libfc: Update rport reference counting

Originally libfc would just be initializing the refcount to '1', and
using the disc_mutex to synchronize if and when the final put should be
happening.  This has a race condition as the mutex might be delayed,
causing other threads to access an invalid structure.  This patch
updates the rport reference counting to increase the reference every
time 'rport_lookup' is called, and decreases the reference
correspondingly.  This removes the need to hold 'disc_mutex' when
removing the structure, and avoids the above race condition.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Vasu Dev <vasu.dev@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ultrastor.c depends on ISA_DMA_API

Fix build when CONFIG_ISA_DMA_API is not enabled. Fixes these build
errors (on x86_64):

../drivers/scsi/ultrastor.c: In function 'ultrastor_14f_detect':
../drivers/scsi/ultrastor.c:519:5: error: implicit declaration of function 'request_dma' [-Werror=implicit-function-declaration]
     if (config.dma_channel && request_dma(config.dma_channel,"Ultrastor")) {
     ^
../drivers/scsi/ultrastor.c: In function 'ultrastor_release':
../drivers/scsi/ultrastor.c:658:3: error: implicit declaration of function 'free_dma' [-Werror=implicit-function-declaration]
   free_dma(shost->dma_channel);
   ^

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

bnx2i: fix spelling mistake "complection" -> "completion"

Trivial fix to spelling mistake in printk message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

hisi_sas: update driver version to 1.5

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

hisi_sas: fix the inconsistent lock issue reported by CONFIG_PROVE_LOCKING

It is not necessary to surround call to
notify_port_event(, PORTE_BROADCAST_RCVD) by spin_lock_irqsave(),
so remove.
This was causing a warn, as below:

    =================================
    [ INFO: inconsistent lock state ]
    4.4.8+ #12 Not tainted
    ---------------------------------
    inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
    kworker/u64:1/168 [HC0[0]:SC0[0]:HE1:SE1] takes:
     (&(&hisi_hba->lock)->rlock){?.....}, at: [<ffffffc00052c708>] alloc_dev_quirk_v2_hw+0x48/0xec
    {IN-HARDIRQ-W} state was registered at:
      [<ffffffc0000fc764>] mark_lock+0x19c/0x6a0
      [<ffffffc0000fdc14>] __lock_acquire+0xa2c/0x1d00
      [<ffffffc0000ff654>] lock_acquire+0x58/0x7c
      [<ffffffc0008b609c>] _raw_spin_lock_irqsave+0x54/0x6c
      [<ffffffc00052d3c0>] int_chnl_int_v2_hw+0x1c4/0x248
      [<ffffffc0001098e8>] handle_irq_event_percpu+0x9c/0x144
      [<ffffffc0001099d4>] handle_irq_event+0x44/0x74
      [<ffffffc00010cd68>] handle_fasteoi_irq+0xb4/0x188
      [<ffffffc000108ea8>] generic_handle_irq+0x24/0x38
      [<ffffffc0001091fc>] __handle_domain_irq+0x60/0xac
      [<ffffffc00008261c>] gic_handle_irq+0xcc/0x168
      [<ffffffc0000855ac>] el1_irq+0x6c/0xe0
      [<ffffffc0000f7414>] default_idle_call+0x1c/0x34
      [<ffffffc0000f7654>] cpu_startup_entry+0x1d4/0x228
      [<ffffffc0008aecd8>] rest_init+0x150/0x160
      [<ffffffc000c4b95c>] start_kernel+0x3a4/0x3b8
      [<00000000008bb000>] 0x8bb000
    irq event stamp: 32661
    hardirqs last  enabled at (32661): [<ffffffc0008b41a8>] __mutex_unlock_slowpath+0x108/0x18c
    hardirqs last disabled at (32660): [<ffffffc0008b40e4>] __mutex_unlock_slowpath+0x44/0x18c
    softirqs last  enabled at (25114): [<ffffffc0000bde68>] __do_softirq+0x210/0x27c
    softirqs last disabled at (25095): [<ffffffc0000be224>] irq_exit+0x9c/0xe8

    other info that might help us debug this:
     Possible unsafe locking scenario:

           CPU0
           ----
      lock(&(&hisi_hba->lock)->rlock);
      <Interrupt>
        lock(&(&hisi_hba->lock)->rlock);

     *** DEADLOCK ***

    2 locks held by kworker/u64:1/168:
     #0:  ("%s"shost->work_q_name){++++.+}, at: [<ffffffc0000d2980>] process_one_work+0x134/0x3cc
     #1:  ((&sw->work)#2){+.+.+.}, at: [<ffffffc0000d2980>] process_one_work+0x134/0x3cc

    stack backtrace:
    CPU: 4 PID: 168 Comm: kworker/u64:1 Not tainted 4.4.8+ #12
    Hardware name: Huawei Technologies Co., Ltd. D03/D03, BIOS 1.12 01/01/1900
    Workqueue: scsi_wq_1 sas_discover_domain
    Call trace:
    [<ffffffc000089988>] dump_backtrace+0x0/0x114
    [<ffffffc000089ab0>] show_stack+0x14/0x1c
    [<ffffffc00035ac50>] dump_stack+0xb4/0xf0
    [<ffffffc0000fc524>] print_usage_bug+0x210/0x2b4
    [<ffffffc0000fcbc4>] mark_lock+0x5fc/0x6a0
    [<ffffffc0000fd9e8>] __lock_acquire+0x800/0x1d00
    [<ffffffc0000ff654>] lock_acquire+0x58/0x7c
    [<ffffffc0008b5edc>] _raw_spin_lock+0x44/0x58
    [<ffffffc00052c708>] alloc_dev_quirk_v2_hw+0x48/0xec
    [<ffffffc000528214>] hisi_sas_dev_found+0x48/0x1b8
    [<ffffffc00051a9b8>] sas_notify_lldd_dev_found+0x34/0xe0
    [<ffffffc00051e5e8>] sas_discover_root_expander+0x58/0x128
    [<ffffffc00051b38c>] sas_discover_domain+0x4bc/0x564
    [<ffffffc0000d29ec>] process_one_work+0x1a0/0x3cc
    [<ffffffc0000d2d50>] worker_thread+0x138/0x438
    [<ffffffc0000d9494>] kthread+0xdc/0xf0
    [<ffffffc000085c50>] ret_from_fork+0x10/0x40

Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

hisi_sas: add v2 hw ACPI support

Add support in v2 hw driver for ACPI.

A check on whether an ACPI handle is available for the device is used to
decide on whether to use ACPI reset handler or syscon for hw reset.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: storvsc: Filter out storvsc messages CD-ROM medium not present

When a virtual scsi DVD device is present with no image file
attached the storvsc driver logs all resulting unnecessary sense errors
whenever IO is issued to the device.

[storvsc] Sense Key : Not Ready [current]
[storvsc] Add. Sense: Medium not present - tray closed

[mkp: Fixed whitespace]

Signed-off-by: Cathy Avery <cavery@redhat.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

bnx2fc: replace printk() with BNX2FC_IO_DBG()

The "fcp_rsp_code = %d" message isn't an error, it's meant to be
informative only.  This patch prevents a flood of such messages in some
situations.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

mpt3sas: avoid mpt3sas_transport_port_add NULL parent_dev

If _scsih_sas_host_add's call to mpt3sas_config_get_sas_iounit_pg0
fails, ioc->sas_hba.parent_dev may be left uninitialized.  A later
device probe could invoke mpt3sas_transport_port_add which will call
sas_port_alloc_num [scsi_transport_sas] with a NULL parent_dev pointer.

Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

mpt3sas: set num_phys after allocating phy[] space

In _scsih_sas_host_add, the number of HBA phys are determined and then
later used to allocate an array of struct _sas_phy's.  If the routine
sets ioc->sas_hba.num_phys, but then fails to allocate the
ioc->sas_hba.phy array (by kcalloc error or other intermediate
error/exit path), ioc->sas_hba is left in a dangerous state: all readers
of ioc->sas_hba.phy[] do so by indexing it from 0..ioc->sas_hba.num_phys
without checking that the space was ever allocated.

Modify _scsih_sas_host_add to set ioc->sas_hba.num_phys only after
successfully allocating ioc->sas_hba.phy[].

Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>