review.tizen.org Git - platform/kernel/linux-rpi.git/log

Merge tag 'drm-intel-next-2021-01-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- WARN if plane src coords are too big (Ville)
- Prevent double YUV range correction on HDR planes (Andres)
- DP MST related Fixes (Sean, Imre)
- More clean-up around DRAM detection code (Jose)
- Actually async flips enable for all ilk+ platforms (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129225328.GA1041349@intel.com

Merge tag 'drm/tegra/for-5.12-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next

drm/tegra: Changes for v5.12-rc1

Adds support for newer firmware image versions of the Video Image
Composer (VIC) and adds a comment clarifying the use of the STREAMID
registers. Fixes a couple of issues with display and gr2d on older
Tegra SoCs such as Tegra114, as well as a runtime PM reference leak.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129193807.3653456-1-thierry.reding@gmail.com

Merge branch 'linux-5.12' of git://github.com/skeggsb/linux into drm-next

Nothing too major here, I actually thought I'd sent most of these
right before the new year, but that apparently got lost in the bustle:
- Turing MMU fault recovery fixes
- Fix mDP connectors being reported as eDP to userspace
- Fixes for audio locking, and other bit-rot from DRM changes since
atomic support was written
- Misc other minor fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7yLfhuVbYa-4g0vxVt93OaC7Sodiz2R-TDHu-MoofEdw@mail.gmail.com

drm/i915/dp: Prevent setting the LTTPR LT mode if no LTTPRs are detected

Atm, the driver programs explicitly the default transparent link
training mode (0x55) to DP_PHY_REPEATER_MODE even if no LTTPRs are
detected.

This conforms to the spec (3.6.6.1):
"DP upstream devices that do not enable the Non-transparent mode of
LTTPRs shall program the PHY_REPEATER_MODE register (DPCD Address
F0003h) to 55h (default) prior to link training"

however writing the default value to this DPCD register seems to cause
occasional link training errors at least for a DELL WD19TB TBT dock, when
no LTTPRs are detected.

Writing to DP_PHY_REPEATER_MODE will also cause an unnecessary timeout
on systems without any LTTPR.

To fix the above two issues let's assume that setting the default mode
is redundant when no LTTPRs are detected. Keep the existing behavior and
program the default mode if more than 8 LTTPRs are detected or in case
the read from DP_PHY_REPEATER_CNT returns an invalid value.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/2801
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118183143.1145707-1-imre.deak@intel.com

drm/i915: Implement async flips for vlv/chv

Add support for async flips on vlv/chv. Unlike all the other
platforms vlv/chv do not use the async flip bit in DSPCNTR and
instead we select between async vs. sync flips based on the
surface address register. The normal DSPSURF generates sync
flips DSPADDR_VLV generates async flips. And as usual the
interrupt bits are different from the other platforms.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-12-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Implement async flip for ilk/snb

Add support for async flips on ivb/hsw. Again no need for any
workarounds and just have to deal with the interrupt bits being
shuffled around a bit.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-11-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Implement async flip for ivb/hsw

Add support for async flips on ivb/hsw. Unlike bdw+ we don't need
any workarounds to disable async flips. Apart from that the only
real difference from the bdw implementation is the location of the
flip_done interrupt bits.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-10-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Implement async flips for bdw

Implement async flip support for BDW. The implementation is
similar to the skl+ code. And just like skl/bxt/glk bdw also
needs the disable w/a, thus we need to plumb the desired state
of the async flip all the way down to i9xx_plane_ctl_crtc().

According to the spec we do need to bump the surface alignment
to 256KiB for this. Async flips require an X-tiled buffer so
we don't have to worry about linear.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-9-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Limit plane stride to below TILEOFF.x limit

Limit pre-skl plane stride to below 4k or 8k pixels (depending on
the platform). We do this in order guarantee that TILEOFF/OFFSET.x
does not get too big.

Currently this is not a problem as we align SURF to 4k, and so
TILEOFF/OFFSET only have to deal with a single tile's worth of
pixels. But for async flips we're going to have to bump SURF
alignment to 256k, and thus we can no longer guarantee
TILEOFF/OFFSET.x will stay within acceptable bounds. We can avoid
this by borrowing a trick from the skl+ code and limit the max
plane stride to whatever value we can fit into TILEOFF/OFFSET.x.

The slight downside is that we may end up doing GTT remapping in
a few more cases where previously we did not have to. But since
that will only happen with huge buffers I'm not really concerned
about it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-3-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Rename is_16gb_dimm to wm_lv_0_adjust_needed

As it now it is always required for GEN12+ the is_16gb_dimm name
do not make sense for GEN12+.

v2:
- Updated comment on top of "dram_info->wm_lv_0_adjust_needed =
!IS_GEN9_LP(i915);"

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-3-jose.souza@intel.com

drm/i915/gen11+: Only load DRAM information from pcode

Up to now we were reading some DRAM information from MCHBAR register
and from pcode what is already not good but some GEN12(TGL-H and ADL-S)
platforms have MCHBAR DRAM information in different offsets.

This was notified to HW team that decided that the best alternative is
always apply the 16gb_dimm watermark adjustment for GEN12+ platforms
and read the remaning DRAM information needed to other display
programming from pcode.

So here moving the DRAM pcode function to intel_dram.c, removing
the duplicated fields from intel_qgv_info, setting and using
information from dram_info.

v2:
- bring back num_points to intel_qgv_info as num_qgv_point can be
overwritten in icl_get_qgv_points()
- add gen12_get_dram_info() and simplify gen11_get_dram_info()

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-2-jose.souza@intel.com

drm/i915: Nuke not needed members of dram_info

Valid, ranks and bandwidth_kbps are set into dram_info but are not
used anywhere else so nuking it.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-1-jose.souza@intel.com

Merge tag 'drm-intel-next-2021-01-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- HDCP 2.2 and HDCP 1.4 Gen12 DP MST support (Anshuman)
- Fix DP vswing settings and handling (Imre, Ville)
- Various display code clean-up (Jani, Ville)
- Various display refactoring, including split out of pps, aux, and fdi (Ja\
ni, Dave)
- Add DG1 missing workarounds (Jose)
- Fix display color conversion (Chris, Ville)
- Try to guess PCH type even without ISA bridge (Zhenyu)
- More backlight refactor (Lyude)
- Support two CSC module on gen11 and later (Lee)
- Async flips for all ilk+ platforms (Ville)
- Clear color support for TGL (RK)
- Add a helper to read data from a GEM object page (Imre)
- VRR/Adaptive Sync Enabling on DP/eDP for TGL+ (Manasi, Ville Aditya)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127140822.GA711686@intel.com

drm/nouveau/kms: handle mDP connectors

In some cases we have the handle those explicitly as the fallback
connector type detection fails and marks those as eDP connectors.

Attempting to use such a connector with mutter leads to a crash of mutter
as it ends up with two eDP displays.

Information is taken from the official DCB documentation.

Cc: stable@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Ben Skeggs <bskeggs@redhat.com>
Reported-by: Mark Pearson <markpearson@lenovo.com>
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: bail out of nouveau_channel_new if channel init fails

Unprivileged user can crash kernel by using DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC
ioctl. This was reported by trinity[1] fuzzer.

[   71.073906] nouveau 0000:01:00.0: crashme[1329]: channel failed to initialise, -17
[   71.081730] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[   71.088928] #PF: supervisor read access in kernel mode
[   71.094059] #PF: error_code(0x0000) - not-present page
[   71.099189] PGD 119590067 P4D 119590067 PUD 1054f5067 PMD 0
[   71.104842] Oops: 0000 [#1] SMP NOPTI
[   71.108498] CPU: 2 PID: 1329 Comm: crashme Not tainted 5.8.0-rc6+ #2
[   71.114993] Hardware name: AMD Pike/Pike, BIOS RPK1506A 09/03/2014
[   71.121213] RIP: 0010:nouveau_abi16_ioctl_channel_alloc+0x108/0x380 [nouveau]
[   71.128339] Code: 48 89 9d f0 00 00 00 41 8b 4c 24 04 41 8b 14 24 45 31 c0 4c 8d 4b 10 48 89 ee 4c 89 f7 e8 10 11 00 00 85 c0 75 78 48 8b 43 10 <8b> 90 a0 00 00 00 41 89 54 24 08 80 7d 3d 05 0f 86 bb 01 00 00 41
[   71.147074] RSP: 0018:ffffb4a1809cfd38 EFLAGS: 00010246
[   71.152526] RAX: 0000000000000000 RBX: ffff98cedbaa1d20 RCX: 00000000000003bf
[   71.159651] RDX: 00000000000003be RSI: 0000000000000000 RDI: 0000000000030160
[   71.166774] RBP: ffff98cee776de00 R08: ffffdc0144198a08 R09: ffff98ceeefd4000
[   71.173901] R10: ffff98cee7e81780 R11: 0000000000000001 R12: ffffb4a1809cfe08
[   71.181214] R13: ffff98cee776d000 R14: ffff98cec519e000 R15: ffff98cee776def0
[   71.188339] FS:  00007fd926250500(0000) GS:ffff98ceeac80000(0000) knlGS:0000000000000000
[   71.196418] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   71.202155] CR2: 00000000000000a0 CR3: 0000000106622000 CR4: 00000000000406e0
[   71.209297] Call Trace:
[   71.211777]  ? nouveau_abi16_ioctl_getparam+0x1f0/0x1f0 [nouveau]
[   71.218053]  drm_ioctl_kernel+0xac/0xf0 [drm]
[   71.222421]  drm_ioctl+0x211/0x3c0 [drm]
[   71.226379]  ? nouveau_abi16_ioctl_getparam+0x1f0/0x1f0 [nouveau]
[   71.232500]  nouveau_drm_ioctl+0x57/0xb0 [nouveau]
[   71.237285]  ksys_ioctl+0x86/0xc0
[   71.240595]  __x64_sys_ioctl+0x16/0x20
[   71.244340]  do_syscall_64+0x4c/0x90
[   71.248110]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   71.253162] RIP: 0033:0x7fd925d4b88b
[   71.256731] Code: Bad RIP value.
[   71.259955] RSP: 002b:00007ffc743592d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
[   71.267514] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd925d4b88b
[   71.274637] RDX: 0000000000601080 RSI: 00000000c0586442 RDI: 0000000000000003
[   71.281986] RBP: 00007ffc74359340 R08: 00007fd926016ce0 R09: 00007fd926016ce0
[   71.289111] R10: 0000000000000003 R11: 0000000000000206 R12: 0000000000400620
[   71.296235] R13: 00007ffc74359420 R14: 0000000000000000 R15: 0000000000000000
[   71.303361] Modules linked in: rfkill sunrpc snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep kvm_amd snd_seq ccp snd_seq_device snd_pcm kvm snd_timer snd irqbypass soundcore sp5100_tco pcspkr crct10dif_pclmul crc32_pclmul ghash_clmulni_intel wmi_bmof joydev i2c_piix4 fam15h_power k10temp acpi_cpufreq ip_tables xfs libcrc32c sd_mod t10_pi sg nouveau video mxm_wmi i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm broadcom bcm_phy_lib ata_generic ahci drm e1000 crc32c_intel libahci serio_raw tg3 libata firewire_ohci firewire_core wmi crc_itu_t dm_mirror dm_region_hash dm_log dm_mod
[   71.365269] CR2: 00000000000000a0

simplified reproducer
---------------------------------8<----------------------------------------
/*
* gcc -o crashme crashme.c
* ./crashme /dev/dri/renderD128
*/

struct drm_nouveau_channel_alloc {
uint32_t     fb_ctxdma_handle;
uint32_t     tt_ctxdma_handle;

int          channel;
uint32_t     pushbuf_domains;

/* Notifier memory */
uint32_t     notifier_handle;

/* DRM-enforced subchannel assignments */
struct {
uint32_t handle;
uint32_t grclass;
} subchan[8];
uint32_t nr_subchan;
};

static struct drm_nouveau_channel_alloc channel;

int main(int argc, char *argv[]) {
int fd;
int rv;

if (argc != 2)
die("usage: %s <dev>", 0, argv[0]);

if ((fd = open(argv[1], O_RDONLY)) == -1)
die("open %s", errno, argv[1]);

if (ioctl(fd, DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC, &channel) == -1 &&
errno == EACCES)
die("ioctl %s", errno, argv[1]);

close(fd);

printf("PASS\n");

return 0;
}
---------------------------------8<----------------------------------------

[1] https://github.com/kernelslacker/trinity

Fixes: eeaf06ac1a55 ("drm/nouveau/svm: initial support for shared virtual memory")
Signed-off-by: Frantisek Hrbata <frantisek@hrbata.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: Fix locking for audio callbacks

Noticed that I wasn't paying close enough attention the last time I looked
at our audio callbacks, as I completely missed the fact that we were
figuring out which audio-enabled connector goes to each encoder by checking
it's state, but without grabbing any of the appropriate modesetting locks
to do so.

That being said however: trying to grab modesetting locks in our audio
callbacks would be very painful due to the potential for locking inversion
between HDA and DRM. So, let's instead just copy what i915 does again - add
our own audio lock to protect audio related state, and store each audio
enabled connector in each nouveau_encoder struct so that we don't need to
check any atomic states.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: Use nouveau_encoder->crtc in get_eld callback

drm_encoder->crtc is deprecated for atomic drivers, but
nouveau_encoder->crtc is safe.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: Lookup current encoder/crtc from atomic state

Despite being an atomic driver, nouveau has a lot of leftover code that
relies on retrieving information regarding the new atomic state from
members of drm_encoder and drm_crtc. The first field being used,
drm_encoder.crtc, is deprecated for atomic drivers. The second field being
used is drm_crtc.state, which is only really sensible to use outside of an
atomic modeset.

So, add some helpers to lookup the current crtc for a given outp from the
atomic state. Then, convert most of the code in dispnv50/disp.c to use said
new helper, along with the relevant DRM atomic helpers for retrieving the
new encoder/crtc combinations for a new atomic state.

Note that we don't get rid of the nouveau_encoder.crtc field entirely for
three reasons:

- Legacy modesetting for pre-nv50 still uses it
- It doesn't cause any locking issues
- We need it for the HDA callbacks, as grabbing atomic modesetting locks in
those would be a mess.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: Reverse args for nv50_outp_get_(old|new)_connector()

Just to be more consistent with the order of args that DRM helpers like
drm_atomic_get_new_crtc_state() use.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: s/armh/asyh/ in nv50_msto_atomic_enable()

I have a strange dejavu feeling that I tried to submit a patch for this in
the past, but that it was rejected. I can't remember though, but I'm
further convinced this patch is the right thing to do anyway.

We label the to-be-committed head state in nv50_msto_atomic_enable() as
armh. Normally armh implies a state which is currently armed in hardware.
nv50_msto_atomic_enable() is called _after_ drm_atomic_swap_state()
however, but before the commit tail ends, which means that said state is
not actually armed on hardware.

As well - take note that this is the same convention followed in all of the
other atomic_enable() callbacks.

So, let's correct this to asyh.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: Rename encoder->atomic_(enable|disable) callbacks

No functional changes, just change the function names to match the
callbacks they provide.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: Remove (nv_encoder->crtc) checks in ->disable callbacks

Noticed these in both the disable (which we'll be getting rid of in a
moment) and the atomic disable callbacks: both callback types check whether
or not there's actually a CRTC assigned to the given encoder. However, as
->atomic_disable and ->disable will never be called without a CRTC assigned
to the given encoder there's no point in this check. So just remove it.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo/tu102: Turing channel preemption fix

Previous hardware allowed a MMU fault to be generated by software to
trigger a context switch for engine recovery. Turing has the capability
to preempt all work from a specific runlist processor and removed the
registers currently used for triggering MMU faults. Attempting to access
these non-existent registers results in further errors, so use the
runlist preemption register instead.

Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo/tu102: FIFO interrupt fixes for Turing

Some of the low level FIFO interrupt status bits have changed for
Turing. Update the handling of these to match the hardware.

Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo/tu102: Move Turing specific FIFO functions

Turing requires some changes to FIFO interrupt handling due to changes
in HW register layout. It also requires some changes to implement robust
channel (RC) recovery. This preparatory patch moves the functions
requiring changes into nvkm/engine/fifo/tu102.c so they can be altered
without affecting gk104 and other users. It should not introduce any
functional changes.

Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc/tu102: Remove Turing interrupt hack

This is no longer needed now that tu102_mc_intr_stat has been updated to
look at the correct top-level interrupt bits.

Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc/tu102: Fix MMU fault interrupts on Turing

Turing reports MMU fault interrupts via new top level interrupt
registers. The old PMC MMU interrupt vector is not used by the HW. This
means we can remap the new top-level MMU interrupt to the exisiting PMC
MMU bit which simplifies the implementation until all interrupts are
moved over to using the new top level registers.

Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: Log SOR/PIOR caps

Since I'm almost certain I didn't get capability checking right for
pre-volta chipsets, let's start logging any caps we find to make things
like this obvious in the future.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: Don't call HEAD_SET_CRC_CONTROL in head907d_mode()

This was a mistake that was present before, but never got noticed until
we converted over to using nvidia's class headers for display
programming. Luckily though it never caused any problems, since we
always end up calling crc907d_set_src() after head907d_mode().

So, let's get rid of this.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-: add module option to select EVO/NVD push buffer location

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/gv100-: wait for less NVD pushbuf space for core updates without notify

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50-gp1xx: wait for less EVO pushbuf space for core updates without notify

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/i915: Fix the MST PBN divider calculation

Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit)
value for MST streams if the link parameters (link rate or lane count)
are limited in a way independent of the sink capabilities (reported by
DPCD).

One example of such a limitation is when a MUX between the sink and
source connects only a limited number of lanes to the display and
connects the rest of the lanes to other peripherals (USB).

Another issue is that atm MST core calculates the divider based on the
backwards compatible DPCD (at address 0x0000) vs. the extended
capability info (at address 0x2200). This can result in leaving some
part of the MST BW unused (For instance in case of the WD19TB dock).

Fix the above two issues by calculating the PBN divider value based on
the rate and lane count link parameters that the driver uses for all
other computation.

Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com

drm/dp/mst: Export drm_dp_get_vc_payload_bw()

This function will be needed by the next patch where the driver
calculates the BW based on driver specific parameters, so export it.

At the same time sanitize the function params, passing the more natural
link rate instead of the encoding of the same rate.

v2:
- Fix function documentation. (Lyude)

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com

drm/i915/hdcp: Disable the QSES check for HDCP 1.4 over MST

The HDCP 1.4 spec does not require the QUERY_STREAM_ENCRYPTION_STATUS
check, it was always a nice-to-have. After deploying this across various
devices, we've determined that some MST bridge chips do not properly
support this call for HDCP 1.4 (namely Synaptics and Realtek).

I had considered creating a quirk for this, but I think it's more
prudent to just disable the check entirely since I don't have an idea
how widespread support is.

Changes in v2:
-Rebased on -tip

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210106223909.34476-1-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20210121172620.33066-1-sean@poorly.run

drm/i915/display: Prevent double YUV range correction on HDR planes

Prevent the ICL HDR plane pipeline from performing YUV color range
correction twice when the input is in limited range. This is done by
removing the limited-range code from icl_program_input_csc().

Before this patch the following could happen: user space gives us a YUV
buffer in limited range; per the pipeline in [1], the plane would first
go through a "YUV Range correct" stage that expands the range; the plane
would then go through the "Input CSC" stage which would also expand the
range because icl_program_input_csc() would use a matrix and an offset
that assume limited-range input; this would ultimately cause dark and
light colors to appear darker and lighter than they should respectively.

This is an issue because if a buffer switches between being scanned out
and being composited with the GPU, the user will see a color difference.
If this switching happens quickly and frequently, the user will perceive
this as a flickering.

[1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281

Cc: stable@vger.kernel.org
Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com

drm/i915: WARN if plane src coords are too big

Inform us if we're buggy and are about to exceed the size of the
bitfields in the plane TILEOFF/OFFSET registers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-2-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915/display/vrr: Skip the VRR HW state readout on DSI transcoder

DSI transcoder does not support VRR and hence skip the HW state
readout if its a DSI transcoder.

Fixes: c7f0f4372b30 ("drm/i915/display: Add HW state readout for VRR")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210126185224.32340-1-manasi.d.navare@intel.com

drm/i915: Do a bit more initial readout for dbuf

Readout the dbuf related stuff during driver init/resume and
stick it into our dbuf state.

v2: Keep crtc_state->wm.skl.ddb

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-9-ville.syrjala@linux.intel.com

drm/i915: Encapsulate dbuf state handling harder

In order to make the dbuf state computation less fragile
let's make it stand on its own feet by not requiring someone
to peek into a crystall ball ahead of time to figure out
which pipes need to be added to the state under which potential
future conditions. Instead we compute each piece of the state
as we go along, and if any fallout occurs that affects more than
the current set of pipes we add the affected pipes to the state
naturally.

That requires that we track a few extra thigns in the global
dbuf state: dbuf slices for each pipe, and the weight each
pipe has when distributing the same set of slice(s) between
multiple pipes. Easy enough.

We do need to follow a somewhat careful sequence of computations
though as there are several steps involved in cooking up the dbuf
state. Thoguh we could avoid some of that by computing more things
on demand instead of relying on earlier step of the algorithm to
have filled it out. I think the end result is still reasonable
as the entire sequence is pretty much consolidated into a single
function instead of being spread around all over.

The rough sequence is this:
1. calculate active_pipes
2. calculate dbuf slices for every pipe
3. calculate total enabled slices
4. calculate new dbuf weights for any crtc in the state
5. calculate new ddb entry for every pipe based on the sets of
   slices and weights, and add any affected crtc to the state
6. calculate new plane ddb entries for all crtcs in the state,
   and add any affected plane to the state so that we'll perform
   the requisite hw reprogramming

And as a nice bonus we get to throw dev_priv->wm.distrust_bios_wm
out the window.

v2: Keep crtc_state->wm.skl.ddb

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-8-ville.syrjala@linux.intel.com

drm/i915: Extract intel_crtc_dbuf_weights()

Extract the code to calculate the weights used to chunk up the dbuf
between pipes. There's still extra stuff in there that shouldn't be
there and must be moved out, but that requires a bit more state to
be tracked in the dbuf state.

v2: Keep crtc_state->wm.skl.ddb

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-7-ville.syrjala@linux.intel.com

drm/i915: Add pipe ddb entries into the dbuf state

The dbuf state will be where we collect all the inter-pipe dbuf
allocation stuff. Start by adding the actual per-pipe ddb entries
there.

Originally the plan was to move them there outright, but that no longer
works as we're no longer guaranteed to have a dbuf state when it comes
time to sanity check the ddb overlaps in skl_commit_modeset_enables().
I think when I wrote this originally we did the watermark/ddb
calculation last, and so we couldn't have any crtcs in the state w/o
also having the dbuf state. But that has since changed and we do the
watermark/ddb calculation much earlier, and thus it is now possible
to commit crtcs w/o a dbuf state. So we keep another copy of the
information in the crtc state.

v2: Rebase
v3: Duplicate the entries instead of moving

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-6-ville.syrjala@linux.intel.com

drm/i915: Introduce skl_ddb_entry_for_slices()

Generalize icl_get_first_dbuf_slice_offset() into something that
just gives us the start+end of the dbuf chunk covered by the
specified slices as a standard ddb entry. Initial idea was to use
it during readout as well, but we shall see.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-5-ville.syrjala@linux.intel.com

drm/i915: Introduce intel_dbuf_slice_size()

Put the code into a function with a descriptive name. Also relocate
the code a bit help future work.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-4-ville.syrjala@linux.intel.com

drm/i915: Pass the crtc to skl_compute_dbuf_slices()

skl_compute_dbuf_slices() has no use for the crtc state, so
just pass the crtc itself.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-3-ville.syrjala@linux.intel.com

drm/i915: Extract intel_crtc_ddb_weight()

skl_ddb_get_pipe_allocation_limits() doesn't care how the weights
for distributing the ddb are caclculated for each pipe. Put that
calculation into a separate function so that such mundane details
are hidden from view.

v2: s/adjusted_mode/pipe_mode/

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-2-ville.syrjala@linux.intel.com

drm/i915: Fix vblank evasion with vrr

With vrr enabled the hardware no longer latches the registers
automagically at vblank start. The point at which it will do the
latching even when no push has been sent is the vmax decision
boundary. That is the thing we need to evade to avoid our
register latching to get split between two frames.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-18-manasi.d.navare@intel.com

drm/i915: Fix vblank timestamps with VRR

To get sensible vblank timestamping behaviour we need to feed
the vmax based timings to the vblank code, otherwise it'll chop
off the scanline counter when it exceeds the minumum vtotal.

Additionally with VRR we have three cases to consider when we
generate the vblank timestamp:
1) we are in vertical active
  -> nothing special needs to be done, just return the current
     scanout position and the core will calculate the timestamp
     corresponding to the past time when the current vertical
     active started
2) we are in vertical blank and no push has been sent
  -> the hardware will keep extending the vblank presumably
     to its maximum length, so we make the timestmap match the
     expected time when the max length vblank will end. Since
     the timings used for this are now based on vmax nothing
     special actually needs to be done
3) we are in vblank and a push has been sent so the vblank is
   about to terminate
  -> presumably we want the timestmap to accurately reflect
     when the vblank will terminate, so we use the sampled
     frame timestamp vs. current timestamp to guesstimate
     how far along the vblank exit we are, and then we
     adjust the reported scanout position accordingly so
     that the core will see that the vblank is close to
     ending.

v2:
* Fix the else if (use_scanline_Counter) (Manasi)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-17-manasi.d.navare@intel.com

drm/i915: Add vrr state dump

Dump vrr state alongside everything else.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-16-manasi.d.navare@intel.com

drm/i915/display: Helpers for VRR vblank min and max start

With VRR the earliest the registers can get latched are at
flipline decision boundary, calculate that as vrr_vmin_vblank_start()
and the latest the regsiters can get latched are vmax decision boundary
calculate that as vrr_vmax_vblank_start()

v2:
* Remove TODO and adjust extra scanline const (Manasi)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-15-manasi.d.navare@intel.com

drm/i915/display: Add HW state readout for VRR

This functions gets the VRR config from the VRR registers
to match the crtc state variables for VRR.

v2:
* Rebase (Manasi)
* Use HAS_VRR (Jani N)

v3:
* Get pipeline_full, flipline (Ville)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-14-manasi.d.navare@intel.com

drm/i915/display/vrr: Set IGNORE_MSA_PAR state in DP Sink

If VRR is enabled, the sink should ignore MSA parameters
and regenerate incoming video stream without depending
on these parameters. Hence set the MSA_TIMING_PAR_IGNORE_EN
bit if VRR is enabled.
Reset this bit on VRR disable.

v2:
* ACtually set the dpcd msa ignore bit (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-13-manasi.d.navare@intel.com

drm/i915/display/vrr: Disable VRR in modeset disable path

This patch disables the VRR enable and VRR PUSH
bits in the HW during commit modeset disable sequence.

Thsi disable will happen when the port is disabled
or when the userspace sets VRR prop to false and
requests to disable VRR.

v2:
* Use intel_de_rmw (Jani N)

v3:
* Remove rmw (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-12-manasi.d.navare@intel.com

drm/i915/display/vrr: Send VRR push to flip the frame

VRR achieves vblank stretching using the HW PUSH functionality.
So once the VRR is enabled during modeset then for each flip
request from userspace, in the atomic tail pipe_update_end()
we need to set the VRR push bit in HW for it to terminate
the vblank at configured flipline or anytime after flipline
or latest at the Vmax.

The HW clears the PUSH bit after the double buffer updates
are completed.

v2:
* Move send push to after irq en (Manasi)
* Call send push unconditionally (Jani N)

v3:
* Stall w.r.t Vrr vmax (Manasi, Gary Smith)

v4:
* Remove the rmw (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gary Smith <gary.k.smith@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-11-manasi.d.navare@intel.com

drm/i915/display/vrr: Configure and enable VRR in modeset enable

This patch computes the VRR parameters from VRR crtc states
and configures them in VRR registers during CRTC enable in
the modeset enable sequence.

v2:
* Remove initialization to 0 (Jani N)
* Use correct pipe %c (Jani N)

v3:
* Remove debug prints (Ville)
* Use cpu_trans instead of pipe for TRANS_VRR regs (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-10-manasi.d.navare@intel.com

drm/i915: Rename VRR_CTL reg fields

Give the pipeline full line count bits more descriptive names

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-9-manasi.d.navare@intel.com

drm/i915/display: VRR + DRRS cannot be enabled together

If VRR is enabled, DRRS cannot be enabled, so make this check
in atomic check.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-8-manasi.d.navare@intel.com

drm/i915/display/dp: Do not enable PSR if VRR is enabled

Even though our HW supports PSR + VRR, the available panels
do not work reliably with PSR and VRR together. So if user
requested VRR and is supported by HW enable that and do not
enable PSR in that case.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-7-manasi.d.navare@intel.com

drm/i915/display/dp: Compute VRR state in atomic_check

This forces a complete modeset if vrr drm crtc state goes
from enabled to disabled and vice versa.
This patch also computes vrr state variables from the mode timings
and based on the vrr property set by userspace as well as hardware's
vrr capability.

v2:
*Rebase
v3:
* Vmin = max (vtotal, vmin) (Manasi)
v4:
* set crtc_state->vrr.enable = 0 for disable request
v5:
* drm_dbg_kms, squash crtc states def patch (Jani N)
v6:
* Move vrr modeset check to separate function (Jani N)
v7:
* Ville's fixes - vmin, vmax rename, fix rounding dir
* Add pipeline full, flipline to crtc state
* Pass conn state to vrr_compute_config (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-6-manasi.d.navare@intel.com

drm/i915: Extract intel_crtc_scanlines_since_frame_timestamp()

Extract intel_crtc_scanlines_since_frame_timestamp() from
__intel_get_crtc_scanline_from_timestamp(). We'll reuse this
for VRR vblank timestamps.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-5-manasi.d.navare@intel.com

drm/i915: Extract intel_mode_vblank_start()

We want to calculate the vblank_start for vblank evasion
differently for vrr. To make that nicer lets first extract
the current non-vrr case to a helper.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-4-manasi.d.navare@intel.com

drm/i915: Store framestart_delay in dev_priv

The vrr calculations will need to know the framestart delay value
we use. Currently we program it always to zero, but should that change
we probably want to stash it somewhere.

Could stick it into the crtc_state I suppose, but since we never
change it let's just stuff it into dev_priv for now.

v2:
* Rebase on drm-tip (Manasi)

v3:
* Framestart_delay as 1 - 4 to align with HW

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-3-manasi.d.navare@intel.com

drm/i915/display/dp: Attach and set drm connector VRR property

This function sets the VRR property for connector based
on the platform support, EDID monitor range and DP sink
DPCD capability of outputing video without msa
timing information.

v8:
* Use HAS_VRR, remove drm_conn declaration (Jani N)
* Fix typos in Comment (Jani N)
v7:
* Move the helper to separate file (Manasi)
v6:
* Remove unset of prop
v5:
* Fix the vrr prop not being set in kernel (Manasi)
* Unset the prop on connector disconnect (Manasi)
v4:
* Rebase (Mansi)
v3:
* intel_dp_is_vrr_capable can be used for debugfs, make it
non static (Manasi)
v2:
* Just set this in intel_dp_get_modes instead of new hook (Jani)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-2-manasi.d.navare@intel.com

drm/i915/display/vrr: Create VRR file and add VRR capability check

We create a new file for all VRR related helpers.
Also add a function to check vrr capability based on
platform support, DPCD bits and EDID monitor range.

v2:
* Remove author (Jani N)
* Define HAS_VRR (Jani N)
* Ensure intel_dp can be obtained from conn (Jani N)

v3:
* Fix the header indent (Manasi)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125200818.2015-1-manasi.d.navare@intel.com

Merge tag 'v5.11-rc5' of git://git./linux/kernel/git/torvalds/linux into drm-next

Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Linux 5.11-rc5

Merge tag 'sh-for-5.11' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker:
"Cleanup and warning fixes"

* tag 'sh-for-5.11' of git://git.libc.org/linux-sh:
  sh/intc: Restore devm_ioremap() alignment
  sh: mach-sh03: remove duplicate include
  arch: sh: remove duplicate include
  sh: Drop ARCH_NR_GPIOS definition
  sh: Remove unused HAVE_COPY_THREAD_TLS macro
  sh: remove CONFIG_IDE from most defconfig
  sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE
  sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE
  arch/sh: hyphenate Non-Uniform in Kconfig prompt
  sh: dma: fix kconfig dependency for G2_DMA

Merge tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Still need a final cancelation fix that isn't quite done done,
  expected in the next day or two. That said, this contains:

   - Wakeup fix for IOPOLL requests

   - SQPOLL split close op handling fix

   - Ensure that any use of io_uring fd itself is marked as inflight

   - Short non-regular file read fix (Pavel)

   - Fix up bad false positive warning (Pavel)

   - SQPOLL fixes (Pavel)

   - In-flight removal fix (Pavel)"

* tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  io_uring: account io_uring internal files as REQ_F_INFLIGHT
  io_uring: fix sleeping under spin in __io_clean_op
  io_uring: fix short read retries for non-reg files
  io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
  io_uring: fix skipping disabling sqo on exec
  io_uring: fix uring_flush in exit_files() warning
  io_uring: fix false positive sqo warning on flush
  io_uring: iopoll requests should also wake task ->in_idle state

Merge tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- NVMe pull request from Christoph:
      - fix a status code in nvmet (Chaitanya Kulkarni)
      - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
      - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
      - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
      - fix a double DMA unmap in nvme-pci

- lightnvm error path leak fix (Pan)

- MD pull request from Song:
      - Flush request fix (Xiao)

* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  lightnvm: fix memory leak when submit fails
  nvme-pci: fix error unwind in nvme_map_data
  nvme-pci: refactor nvme_unmap_data
  md: Set prev_flush_start and flush_bio in an atomic way
  nvmet: set right status on error in id-ns handler
  nvme-pci: allow use of cmb on v1.4 controllers
  nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
  nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
  nvme: check the PRINFO bit before deciding the host buffer length

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"18 patches.

  Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
  memory-failure, and highmem), ubsan, proc, and MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: add a couple more files to the Clang/LLVM section
  proc_sysctl: fix oops caused by incorrect command parameters
  powerpc/mm/highmem: use __set_pte_at() for kmap_local()
  mips/mm/highmem: use set_pte() for kmap_local()
  mm/highmem: prepare for overriding set_pte_at()
  sparc/mm/highmem: flush cache and TLB
  mm: fix page reference leak in soft_offline_page()
  ubsan: disable unsigned-overflow check for i386
  kasan, mm: fix resetting page_alloc tags for HW_TAGS
  kasan, mm: fix conflicts with init_on_alloc/free
  kasan: fix HW_TAGS boot parameters
  kasan: fix incorrect arguments passing in kasan_add_zero_shadow
  kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
  mm: fix numa stats for thp migration
  mm: memcg: fix memcg file_dirty numa stat
  mm: memcg/slab: optimize objcg stock draining
  mm: fix initialization of struct page for holes in memory layout
  x86/setup: don't remove E820_TYPE_RAM for pfn 0

Merge tag 'char-misc-5.11-rc5' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.11-rc5:

   - habanalabs driver fixes

   - phy driver fixes

   - hwtracing driver fixes

   - rtsx cardreader driver fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: init value of aspm_enabled
  habanalabs: disable FW events on device removal
  habanalabs: fix backward compatibility of idle check
  habanalabs: zero pci counters packet before submit to FW
  intel_th: pci: Add Alder Lake-P support
  stm class: Fix module init return on allocation failure
  habanalabs: prevent soft lockup during unmap
  habanalabs: fix reset process in case of failures
  habanalabs: fix dma_addr passed to dma_mmap_coherent
  phy: mediatek: allow compile-testing the dsi phy
  phy: cpcap-usb: Fix warning for missing regulator_disable
  PHY: Ingenic: fix unconditional build of phy-ingenic-usb

Merge tag 'driver-core-5.11-rc5' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.11-rc5 that resolve some
  reported problems:

   - revert of a -rc1 patch that was causing problems with some machines

   - device link device name collision problem fix (busses only have to
     name devices unique to their bus, not unique to all busses)

   - kernfs splice bugfixes to resolve firmware loading problems for
     Qualcomm systems.

   - other tiny driver core fixes for minor issues reported.

  All of these have been in linux-next with no reported problems"

* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Fix device link device name collision
  driver core: Extend device_is_dependent()
  kernfs: wire up ->splice_read and ->splice_write
  kernfs: implement ->write_iter
  kernfs: implement ->read_iter
  Revert "driver core: Reorder devices on successful probe"
  Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  drivers core: Free dma_range_map when driver probe failed

Merge tag 'staging-5.11-rc5' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO driver fixes from Greg KH:
"Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
  problems.

  Nothing major, just a few small fixes, all of these have been in
  linux-next for a while and full details are in the shortlog"

* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  iio: ad5504: Fix setting power-down state
  counter:ti-eqep: remove floor
  drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  iio: sx9310: Off by one in sx9310_read_thresh()

Merge tag 'tty-5.11-rc5' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
"Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
  problems:

   - two patches to fix up writing to ttys with splice

   - mvebu-uart driver fix for reported problem

  All of these have been in linux-next with no reported problems"

* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix up hung_up_tty_write() conversion
  tty: implement write_iter
  serial: mvebu-uart: fix tx lost characters at power off

Merge tag 'usb-5.11-rc5' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.11-rc5.  They resolve:

   - xhci issues for some reported problems

   - ehci driver issue for one specific device

   - USB gadget fixes for some reported problems

   - cdns3 driver fixes for issues reported

   - MAINTAINERS file update

   - thunderbolt minor fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: bdc: Make bdc pci driver depend on BROKEN
  xhci: tegra: Delay for disabling LFPS detector
  xhci: make sure TRB is fully written before giving it to the controller
  usb: udc: core: Use lock when write to soft_connect
  USB: gadget: dummy-hcd: Fix errors in port-reset handling
  usb: gadget: aspeed: fix stop dma register setting.
  USB: ehci: fix an interrupt calltrace error
  ehci: fix EHCI host controller initialization sequence
  MAINTAINERS: update Peter Chen's email address
  thunderbolt: Drop duplicated 0x prefix from format string
  MAINTAINERS: Update address for Cadence USB3 driver
  usb: cdns3: imx: improve driver .remove API
  usb: cdns3: imx: fix can't create core device the second time issue
  usb: cdns3: imx: fix writing read-only memory issue

MAINTAINERS: add a couple more files to the Clang/LLVM section

The K: entry should ensure that Nick and I always get CC'd on patches that
touch these files but it is better to be explicit rather than implicit.

Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc_sysctl: fix oops caused by incorrect command parameters

The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val).  If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.

For example:
  "hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
  triggered. The call stack is as follows:
    Kernel command line: .... hung_task_panic
    ......
    Call trace:
    __pi_strlen+0x10/0x98
    parse_args+0x278/0x344
    do_sysctl_args+0x8c/0xfc
    kernel_init+0x5c/0xf4
    ret_from_fork+0x10/0x30

To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().

Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d480e2843 ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/mm/highmem: use __set_pte_at() for kmap_local()

The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU. This got lost with the conversion
to the generic implementation.

Override the default map function.

Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de
Fixes: 47da42b27a56 ("powerpc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mips/mm/highmem: use set_pte() for kmap_local()

set_pte_at() on MIPS invokes update_cache() which might recurse into
kmap_local().

Use set_pte() like the original MIPS highmem implementation did.

Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de
Fixes: a4c33e83bca1 ("mips/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/highmem: prepare for overriding set_pte_at()

The generic kmap_local() map function uses set_pte_at(), but MIPS requires
set_pte() and PowerPC wants __set_pte_at().

Provide arch_kmap_local_set_pte() and default it to set_pte_at().

Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc/mm/highmem: flush cache and TLB

Patch series "mm/highmem: Fix fallout from generic kmap_local
conversions".

The kmap_local conversion wreckaged sparc, mips and powerpc as it missed
some of the details in the original implementation.

This patch (of 4):

The recent conversion to the generic kmap_local infrastructure failed to
assign the proper pre/post map/unmap flush operations for sparc.

Sparc requires cache flush before map/unmap and tlb flush afterwards.

Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de
Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de
Fixes: 3293efa97807 ("sparc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix page reference leak in soft_offline_page()

The conversion to move pfn_to_online_page() internal to
soft_offline_page() missed that the get_user_pages() reference taken by
the madvise() path needs to be dropped when pfn_to_online_page() fails.

Note the direct sysfs-path to soft_offline_page() does not perform a
get_user_pages() lookup.

When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page()
pfn the kernel hangs at dax-device shutdown due to a leaked reference.

Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: feec24a6139d ("mm, soft-offline: convert parameter to pfn")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ubsan: disable unsigned-overflow check for i386

Building ubsan kernels even for compile-testing introduced these
warnings in my randconfig environment:

  crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=]
  static void blake2b_compress(struct blake2b_state *S,

  crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=]
  static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src,

  lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=]
  static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])

  lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=]
  static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10])

Further testing showed that this is caused by
-fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86
architecture.

The one in blake2b immediately overflows the 8KB stack area
architectures, so better ensure this never happens by disabling the
option for 32-bit x86.

Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org
Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/
Fixes: d0a3ac549f38 ("ubsan: enable for all*config builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Marco Elver <elver@google.com>
Cc: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, mm: fix resetting page_alloc tags for HW_TAGS

A previous commit added resetting KASAN page tags to
kernel_init_free_pages() to avoid false-positives due to accesses to
metadata with the hardware tag-based mode.

That commit did reset page tags before the metadata access, but didn't
restore them after. As the result, KASAN fails to detect bad accesses
to page_alloc allocations on some configurations.

Fix this by recovering the tag after the metadata access.

Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com
Fixes: aa1ef4d7b3f6 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, mm: fix conflicts with init_on_alloc/free

A few places where SLUB accesses object's data or metadata were missed
in a previous patch. This leads to false positives with hardware
tag-based KASAN when bulk allocations are used with init_on_alloc/free.

Fix the false-positives by resetting pointer tags during these accesses.

(The kasan_reset_tag call is removed from slab_alloc_node, as it's added
into maybe_wipe_obj_freeptr.)

Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901
Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com
Fixes: aa1ef4d7b3f67 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix HW_TAGS boot parameters

The initially proposed KASAN command line parameters are redundant.

This change drops the complex "kasan.mode=off/prod/full" parameter and
adds a simpler kill switch "kasan=off/on" instead.  The new parameter
together with the already existing ones provides a cleaner way to
express the same set of features.

The full set of parameters with this change:

  kasan=off/on             - whether KASAN is enabled
  kasan.fault=report/panic - whether to only print a report or also panic
  kasan.stacktrace=off/on  - whether to collect alloc/free stack traces

Default values:

  kasan=on
  kasan.fault=report
  kasan.stacktrace=on  (if CONFIG_DEBUG_KERNEL=y)
  kasan.stacktrace=off (otherwise)

Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8
Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix incorrect arguments passing in kasan_add_zero_shadow

kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.

Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow

During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.

In the test case for kasan_remove_zero_shadow():

    shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000

    3-level page table:
      PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K

0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.

In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.

Fix by correcting the condition when next and addr are neither aligned.

Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'irq_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Borislav Petkov:

- Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy.

- Fix to not lose IPIs on bcm2836.

- Fix for a bogus marking of ITS devices as shared due to unitialized
   stack variable.

- Clear a phantom interrupt on qcom-pdc to unblock suspend.

- Small cleanups, warning and build fixes.

* tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Export irq_check_status_bit()
  irqchip/mips-cpu: Set IPI domain parent chip
  irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig
  irqchip/loongson-liointc: Fix build warnings
  driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq
  irqchip/irq-sl28cpld: Convert comma to semicolon
  genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()

Merge tag 'objtool_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip

Pull objtool fixes from Borislav Petkov:

- Adjust objtool to handle a recent binutils change to not generate
   unused symbols anymore.

- Revert the fail-the-build-on-fatal-errors objtool strategy for now
   due to the ever-increasing matrix of supported toolchains/plugins and
   them causing too many such fatal errors currently.

- Do not add empty symbols to objdump's rbtree to accommodate clang
   removing section symbols.

* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Don't fail on missing symbol table
  objtool: Don't fail the kernel build on fatal errors
  objtool: Don't add empty symbols to the rbtree

Merge tag 'sched_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

- Correct the marking of kthreads which are supposed to run on a
   specific, single CPU vs such which are affine to only one CPU, mark
   per-cpu workqueue threads as such and make sure that marking
   "survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.

- A fix to not push away tasks on CPUs coming online.

- Have workqueue CPU hotplug code use cpu_possible_mask when breaking
   affinity on CPU offlining so that pending workers can finish on newly
   arrived onlined CPUs too.

- Dump tasks which haven't vacated a CPU which is currently being
   unplugged.

- Register a special scale invariance callback which gets called on
   resume from RAM to read out APERF/MPERF after resume and thus make
   the schedutil scaling governor more precise.

* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Relax the set_cpus_allowed_ptr() semantics
  sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
  sched: Prepare to use balance_push in ttwu()
  workqueue: Restrict affinity change to rescuer
  workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
  kthread: Extract KTHREAD_IS_PER_CPU
  sched: Don't run cpu-online with balance_push() enabled
  workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
  sched/core: Print out straggler tasks in sched_cpu_dying()
  x86: PM: Register syscore_ops for scale invariance

Merge tag 'timers_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Borislav Petkov:

- Fix an integer overflow in the NTP RTC synchronization which led to
   the latter happening every 2 seconds instead of the intended every 11
   minutes.

- Get rid of now unused get_seconds().

* tag 'timers_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp: Fix RTC synchronization on 32-bit platforms
  timekeeping: Remove unused get_seconds()

Merge tag 'x86_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

- Add a new Intel model number for Alder Lake

- Differentiate which aspects of the FPU state get saved/restored when
   the FPU is used in-kernel and fix a boot crash on K7 due to early
   MXCSR access before CR4.OSFXSR is even set.

- A couple of noinstr annotation fixes

- Correct die ID setting on AMD for users of topology information which
   need the correct die ID

- A SEV-ES fix to handle string port IO to/from kernel memory properly

* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add another Alder Lake CPU to the Intel family
  x86/mmx: Use KFPU_387 for MMX string operations
  x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
  x86/topology: Make __max_die_per_package available unconditionally
  x86: __always_inline __{rd,wr}msr()
  x86/mce: Remove explicit/superfluous tracing
  locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
  locking/lockdep: Cure noinstr fail
  x86/sev: Fix nonistr violation
  x86/entry: Fix noinstr fail
  x86/cpu/amd: Set __max_die_per_package on AMD
  x86/sev-es: Handle string port IO to kernel memory properly

Merge tag 'powerpc-5.11-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix a bad interaction between the scv handling and the fallback L1D
   flush, which could lead to user register corruption. Only affects
   people using scv (~no one) on machines with old firmware that are
   missing the L1D flush.

- Two small selftest fixes.

Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.

* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: fix scv entry fallback flush vs interrupt
  selftests/powerpc: Only test lwm/stmw on big endian
  selftests/powerpc: Fix exit status of pkey tests

Merge tag 'for-linus-2021-01-24' of git://git./linux/kernel/git/brauner/linux

Pull misc fixes from Christian Brauner:

- Jann reported sparse complaints because of a missing __user
   annotation in a helper we added way back when we added
   pidfd_send_signal() to avoid compat syscall handling. Fix it.

- Yanfei replaces a reference in a comment to the _do_fork() helper I
   removed a while ago with a reference to the new kernel_clone()
   replacement

- Alexander Guril added a simple coding style fix

* tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  kthread: remove comments about old _do_fork() helper
  Kernel: fork.c: Fix coding style: Do not use {} around single-line statements
  signal: Add missing __user annotation to copy_siginfo_from_user_any

Merge tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"An important signal handling patch for stable, and two small cleanup
  patches"

* tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: do not fail __smb_send_rqst if non-fatal signals are pending
  fs/cifs: Simplify bool comparison.
  fs/cifs: Assign boolean values to a bool variable

mm: fix numa stats for thp migration

Currently the kernel is not correctly updating the numa stats for
NR_FILE_PAGES and NR_SHMEM on THP migration. Fix that.

For NR_FILE_DIRTY and NR_ZONE_WRITE_PENDING, although at the moment
there is no need to handle THP migration as kernel still does not have
write support for file THP but to be more future proof, this patch adds
the THP support for those stats as well.

Link: https://lkml.kernel.org/r/20210108155813.2914586-2-shakeelb@google.com
Fixes: e71769ae52609 ("mm: enable thp migration for shmem thp")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: fix memcg file_dirty numa stat

The kernel updates the per-node NR_FILE_DIRTY stats on page migration
but not the memcg numa stats.

That was not an issue until recently the commit 5f9a4f4a7096 ("mm:
memcontrol: add the missing numa_stat interface for cgroup v2") exposed
numa stats for the memcg.

So fix the file_dirty per-memcg numa stat.

Link: https://lkml.kernel.org/r/20210108155813.2914586-1-shakeelb@google.com
Fixes: 5f9a4f4a7096 ("mm: memcontrol: add the missing numa_stat interface for cgroup v2")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg/slab: optimize objcg stock draining

Imran Khan reported a 16% regression in hackbench results caused by the
commit f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects
instead of pages").  The regression is noticeable in the case of a
consequent allocation of several relatively large slab objects, e.g.
skb's.  As soon as the amount of stocked bytes exceeds PAGE_SIZE,
drain_obj_stock() and __memcg_kmem_uncharge() are called, and it leads
to a number of atomic operations in page_counter_uncharge().

The corresponding call graph is below (provided by Imran Khan):

  |__alloc_skb
  |    |
  |    |__kmalloc_reserve.isra.61
  |    |    |
  |    |    |__kmalloc_node_track_caller
  |    |    |    |
  |    |    |    |slab_pre_alloc_hook.constprop.88
  |    |    |     obj_cgroup_charge
  |    |    |    |    |
  |    |    |    |    |__memcg_kmem_charge
  |    |    |    |    |    |
  |    |    |    |    |    |page_counter_try_charge
  |    |    |    |    |
  |    |    |    |    |refill_obj_stock
  |    |    |    |    |    |
  |    |    |    |    |    |drain_obj_stock.isra.68
  |    |    |    |    |    |    |
  |    |    |    |    |    |    |__memcg_kmem_uncharge
  |    |    |    |    |    |    |    |
  |    |    |    |    |    |    |    |page_counter_uncharge
  |    |    |    |    |    |    |    |    |
  |    |    |    |    |    |    |    |    |page_counter_cancel
  |    |    |    |
  |    |    |    |
  |    |    |    |__slab_alloc
  |    |    |    |    |
  |    |    |    |    |___slab_alloc
  |    |    |    |    |
  |    |    |    |slab_post_alloc_hook

Instead of directly uncharging the accounted kernel memory, it's
possible to refill the generic page-sized per-cpu stock instead.  It's a
much faster operation, especially on a default hierarchy.  As a bonus,
__memcg_kmem_uncharge_page() will also get faster, so the freeing of
page-sized kernel allocations (e.g.  large kmallocs) will become faster.

A similar change has been done earlier for the socket memory by the
commit 475d0487a2ad ("mm: memcontrol: use per-cpu stocks for socket
memory uncharging").

Link: https://lkml.kernel.org/r/20210106042239.2860107-1-guro@fb.com
Fixes: f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects instead of pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Imran Khan <imran.f.khan@oracle.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Michal Koutn <mkoutny@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix initialization of struct page for holes in memory layout

There could be struct pages that are not backed by actual physical
memory. This can happen when the actual memory bank is not a multiple
of SECTION_SIZE or when an architecture does not register memory holes
reserved by the firmware as memblock.memory.

Such pages are currently initialized using init_unavailable_mem()
function that iterates through PFNs in holes in memblock.memory and if
there is a struct page corresponding to a PFN, the fields if this page
are set to default values and the page is marked as Reserved.

init_unavailable_mem() does not take into account zone and node the page
belongs to and sets both zone and node links in struct page to zero.

On a system that has firmware reserved holes in a zone above ZONE_DMA,
for instance in a configuration below:

# grep -A1 E820 /proc/iomem
7a17b000-7a216fff : Unknown E820 type
7a217000-7bffffff : System RAM

unset zone link in struct page will trigger

VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);

because there are pages in both ZONE_DMA32 and ZONE_DMA (unset zone link
in struct page) in the same pageblock.

Update init_unavailable_mem() to use zone constraints defined by an
architecture to properly setup the zone link and use node ID of the
adjacent range in memblock.memory to set the node link.

Link: https://lkml.kernel.org/r/20210111194017.22696-3-rppt@kernel.org
Fixes: 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>