habanalabs: abort waiting user threads upon error

User should close the FD when being notified about an error, after
which a device reset takes place.

However, if the user has pending threads that wait for completions,
the device release won't be called and eventually the watchdog timeout
will expire, leading to hard reset and killing the user process.

To avoid it, abort such waiting threads right after the error
notification, and block following waiting operations.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: remove releasing of user threads from device release

The device file is not in use when hl_device_release() is called,
and there aren't any user threads that use IOCTLs to wait for
interrupts. Therefore there is no need to release them at this point.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: read binning info from preboot

Sometimes we need the binning info at a very early state of the
driver initialization. Therefore, support was added in preboot to
provide the binning info as part of the f/w descriptor and the driver
can now use that.

Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs/gaudi2: fix BMON 3rd address range

Fix programming incorrect value of address range

Signed-off-by: tal albo <talbo@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Merge tag 'drm-misc-next-2023-01-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.3:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * EDID: Improved mode parsing and refactoring

 * fbdev: Cleanups

 * format-helper: Add conversion from XRGB8888 to XBGR8888 and ABGR8888

Driver Changes:

 * accel/ivpu: Add driver for Intel VPU accelerator

 * bridge: Support i.MX93 LDB plus DT bindings

 * exynos: Fixes

 * panel: vtdr6130: Fixes; Support AUO A030JTN01 plus DT bindings

 * simpledrm: Support system-memory framebuffers plus DT bindings

 * ssd130x: Fix sparse warning

Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPQN9YACgkQaA3BHVML
# eiNmmQf/bTV3oaMo55i3tYxhMCWYDtPVk+GGglDAykW7Lid8pvy6mJqJoW6uvgQF
# c6CcoY+6yG2WvnVLhXyhPaACiG5weQSdu3S/DdZ2nuJCb50YCwWNNKcu3qYnLVlz
# 2NQ/s0HN+Xvvy76GJFNarKlxSNADPWCNJ8wExAdBkWr7q8NiDfsWuMGrQRQORrm3
# zEkSJPKtWNHa+vmsQOO9yebD0LFx97CoU40FrVXZTtF0FugGIXjiknQwekzuFxdY
# fGBiFKsI+Y3s51gAppbmRRJ0jGLj3KDF5S+5GM8FNbgJQF67Wxttl/YtY6lJGcsa
# l0vpRoCe1ilhNVvoikzAu7UewkPKKA==
# =GLLt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 25 Jan 2023 05:56:06 AEST
# gpg:                using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9A5ceDknyQixM3R@linux-uq9g

Merge tag 'amd-drm-next-6.3-2023-01-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.3-2023-01-20:

amdgpu:
- Secure display fixes
- Fix scaling
- Misc code cleanups
- Display BW alloc logic updates
- DCN 3.2 fixes
- Fix power reporting on certain firmwares for CZN/RN
- SR-IOV fixes
- Link training cleanup and code rework
- HDCP fixes
- Reserved VMID fix
- Documentation updates
- Colorspace fixes
- RAS updates
- GC11.0 fixes
- VCN instance harvesting fixes
- DCN 3.1.4/5 workarounds for S/G displays
- Add PCIe info to the INFO IOCTL

amdkfd:
- XNACK fix

UAPI:
- Add PCIe gen/lanes info to the amdgpu INFO IOCTL
  Nesa ultimately plans to use this to make decisions about buffer placement optimizations
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120234523.7610-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2023-01-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for $kernel-version:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * Cleanup unneeded include statements wrt <linux/fb.h>, <drm/drm_fb_helper.h>
   and <drm/drm_crtc_helper.h>

 * Remove unused helper DRM_DEBUG_KMS_RATELIMITED()

 * fbdev: Remove obsolete aperture field from struct fb_device, plus
   driver cleanups; Remove unused flag FBINFO_MISC_FIRMWARE

 * MIPI-DSI: Fix brightness, plus rsp. driver updates

 * scheduler: Deprecate drm_sched_resubmit_jobs()

 * ttm: Fix MIPS build; Remove ttm_bo_wait(); Documentation fixes

Driver Changes:

 * Remove obsolete drivers for userspace modesetting i810, mga, r128,
   savage, sis, tdfx, via

 * bridge: Support CDNS DSI J721E, plus DT bindings; lt9611: Various
   fixes and improvements; sil902x: Various fixes; Fixes

 * nouveau: Removed support for legacy ioctls; Replace zero-size array;
   Cleanups

 * panel: Fixes

 * radeon: Use new DRM logging helpers

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8kDk5YX7Yz3eRhM@linux-uq9g

Merge tag 'drm-intel-gt-next-2023-01-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

Fixes/improvements/new stuff:

- Fix workarounds on Gen2-3 (Tvrtko Ursulin)
- Fix HuC delayed load memory leaks (Daniele Ceraolo Spurio)
- Fix a BUG caused by impendance mismatch in dma_fence_wait_timeout and GuC (Janusz Krzysztofik)
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663 (Matt Atwood)
- Apply recommended L3 hashing mask tuning parameters (Gen12+) (Matt Roper)
- Improve suspend / resume times with VT-d scanout workaround active (Andi Shyti, Chris Wilson)
- Silence misleading "mailbox access failed" warning in snb_pcode_read (Ashutosh Dixit)
- Fix null pointer dereference on HSW perf/OA (Umesh Nerlige Ramappa)
- Avoid trampling the ring during buffer migration (and selftests) (Chris Wilson, Matthew Auld)
- Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state (Matthew Auld)
- More fixing of DG2 visual corruption by not forgetting to copy CCS aux state of backup objects (Matthew Auld)
- Fix TLB invalidation for Gen12.50 video and compute engines (Andrzej Hajda)
- Limit Wa_22012654132 to just specific steppings (Matt Roper)
- Fix userspace crashes due eviction not working under lock contention after the object locking conversion (Matthew Auld)
- Avoid double free is user deploys a corrupt GuC firmware (John Harrison)
- Fix 32-bit builds by using "%zu" to format size_t (Nirmoy Das)
- Fix a possible BUG in TTM async unbind due not reserving enough fence slots (Nirmoy Das)
- Fix potential use after free by not exposing the GEM context id to userspace too early (Rob Clark)
- Show clamped PL1 limit to the user (hwmon) (Ashutosh Dixit)
- Workaround unreliable reset on Jasperlake (Chris Wilson)
- Cover rest of SVG unit MCR registers (Gustavo Sousa)
- Avoid PXP log spam on platforms which do not support the feature (Alan Previn)
- Re-disable RC6p on Sandy Bridge to avoid GPU hangs and visual glitches (Sasa Dragic)

Future platform enablement:

- Manage uncore->lock while waiting on MCR register (Matt Roper)
- Enable Idle Messaging for GSC CS (Vinay Belgaumkar)
- Only initialize GSC in tile 0 (José Roberto de Souza)
- Media GT and Render GT share common GGTT (Aravind Iddamsetty)
- Add dedicated MCR lock (Matt Roper)
- Implement recommended caching policy (PVC) (Wayne Boyer)
- Add hardware-level lock for steering (Matt Roper)
- Check full IP version when applying hw steering semaphore (Matt Roper)
- Enable GuC GGTT invalidation from the start (Daniele Ceraolo Spurio)
- MTL GSC firmware support (Daniele Ceraolo Spurio, Jonathan Cavitt)
- MTL OA support (Umesh Nerlige Ramappa)
- MTL initial gt workarounds (Matt Roper)

Driver refactors:

- Hold forcewake and MCR lock over PPAT setup (Matt Roper)
- Acquire fw before loop in intel_uncore_read64_2x32 (Umesh Nerlige Ramappa)
- GuC filename cleanups and use submission API version number (John Harrison)
- Promote pxp subsystem to top-level of i915 (Alan Previn)
- Finish proofing the code agains object size overflows (Chris Wilson, Gwan-gyeong Mun)
- Start adding module oriented dmesg output (John Harrison)

Miscellaneous:

- Correct kerneldoc for intel_gt_mcr_wait_for_reg() (Matt Roper)
- Bump up sample period for busy stats selftest (Umesh Nerlige Ramappa)
- Make GuC default_lists const data (Jani Nikula)
- Fix table order verification to check all FW types (John Harrison)
- Remove some limited use register access wrappers (Jani Nikula)
- Remove struct_member macro (Andrzej Hajda)
- Remove hardcoded value with a macro (Nirmoy Das)
- Use helper func to find out map type (Nirmoy Das)
- Fix a static analysis warning (John Harrison)
- Consolidate VMA active tracking helpers (Andrzej Hajda)
- Do not cover all future platforms in TLB invalidation (Tvrtko Ursulin)
- Replace zero-length arrays with flexible-array members (Gustavo A. R. Silva)
- Unwind hugepages to drop wakeref on error (Chris Wilson)
- Remove a couple of superfluous i915_drm.h includes (Jani Nikula)

Merges:

- Merge drm/drm-next into drm-intel-gt-next (Rodrigo Vivi)

danvet: Fix up merge conflict in intel_uc_fw.c, we ended up with 2
copies of try_firmware_load() somehow.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8fW2Ny1B1hZ5ZmF@tursulin-desk

drm/ssd130x: Silence a `dubious: x & !y` warning

The sparse tool complains with the following warning:

$ make M=drivers/gpu/drm/solomon/ C=2
  CC [M]  drivers/gpu/drm/solomon/ssd130x.o
  CHECK   drivers/gpu/drm/solomon/ssd130x.c
drivers/gpu/drm/solomon/ssd130x.c:363:21: warning: dubious: x & !y

This seems to be a false positive in my opinion but still we can silence
the tool while making the code easier to read. Let's also add a comment,
to explain why the "com_seq" logical not is used rather than its value.

Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121190930.2804224-1-javierm@redhat.com

fbdev: Remove unused struct fb_deferred_io .first_io field

This optional callback was added in the commit 1f45f9dbb392 ("fb_defio:
add first_io callback") but it was never used by a driver. Let's remove
it since it's unlikely that will be used after a decade that was added.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-2-javierm@redhat.com

drm/simpledrm: Support the XB24/AB24 format

Add XB24 and AB24 to the list of supported formats. The format helpers
support conversion to these formats and they are documented in the
simple-framebuffer device tree bindings.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-8-thierry.reding@gmail.com

drm/format-helper: Support the AB24/XB24 formats

Add a conversion helper for the AB24 and XB24 formats to use in
drm_fb_blit().

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-7-thierry.reding@gmail.com

drm/simpledrm: Add support for system memory framebuffers

Simple framebuffers can be set up in system memory, which cannot be
requested and/or I/O remapped using the I/O resource helpers. Add a
separate code path that obtains system memory framebuffers from the
reserved memory region referenced in the memory-region property.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-6-thierry.reding@gmail.com

drm/simpledrm: Use struct iosys_map consistently

The majority of the driver already uses struct iosys_map to encapsulate
accesses to I/O remapped vs. system memory. Accesses via the screen base
pointer still use __iomem annotations, which can lead to inconsistencies
and conflicts with subsequent patches.

Convert the screen base to a struct iosys_map as well for consistency
and to avoid these issues.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-5-thierry.reding@gmail.com

dt-bindings: reserved-memory: Support framebuffer reserved memory

Document the "framebuffer" compatible string for reserved memory nodes
to annotate reserved memory regions used for framebuffer carveouts.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-4-thierry.reding@gmail.com

dt-bindings: display: simple-framebuffer: Document 32-bit BGR format

This is a variant of the 32-bit RGB format where the red and blue
components are swapped.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-3-thierry.reding@gmail.com

dt-bindings: display: simple-framebuffer: Support system memory framebuffers

In order to support framebuffers residing in system memory, allow the
memory-region property to override the framebuffer memory specification
in the "reg" property.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-2-thierry.reding@gmail.com

drm/edid: remove redundant _drm_connector_update_edid_property()

Realize that drm_edid_connector_update() and
_drm_connector_update_edid_property() are now the same thing. Drop the
latter.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/712cc299afe33d8f6279a15d5b0117aeeab88bb4.1674144945.git.jani.nikula@intel.com

drm/edid: add separate drm_edid_connector_add_modes()

The original goal with drm_edid_connector_update() was to have a single
call for updating the connector and adding probed modes, in this order,
but that turned out to be problematic. Drivers that need to update the
connector in the .detect() callback would end up updating the probed
modes as well. Turns out the callback may be called so many times that
the probed mode list fills up without bounds, and this is amplified by
add_alternate_cea_modes() duplicating the CEA modes on every call,
actually running out of memory on some machines.

Kudos to Imre Deak <imre.deak@intel.com> for explaining this to me.

Go back to having separate drm_edid_connector_update() and
drm_edid_connector_add_modes() calls. The former may be called from
.detect(), .force(), or .get_modes(), but the latter only from
.get_modes().

Unlike drm_add_edid_modes(), have drm_edid_connector_add_modes() update
the probed modes from the EDID property instead of the passed in
EDID. This is mainly to enforce two things:

1) drm_edid_connector_update() must be called before
   drm_edid_connector_add_modes().

   Display info and quirks are needed for parsing the modes, and we
   don't want to call update_display_info() again to ensure the info is
   available, like drm_add_edid_modes() does.

2) The same EDID is used for both updating the connector and adding the
   probed modes.

Fortunately, the change is easy, because no driver has actually adopted
drm_edid_connector_update(). Not even i915, and that's mainly because of
the problem described above.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e86fff1579f14ebf6334692526c8f6831cd02cac.1674144945.git.jani.nikula@intel.com

drm/edid: refactor _drm_edid_connector_update() and rename

By moving update_display_info() out of _drm_edid_connector_update() we
make the function purely about adding modes. Rename accordingly.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e9880bbb2b5724d9aac88a90a31ba3ba9af9da3f.1674144945.git.jani.nikula@intel.com

drm/edid: split HDMI VSDB info and mode parsing

Separate the parsing of display info and modes from the HDMI VSDB. This
is prerequisite work for overall better separation of the two parsing
steps.

The info parsing is about figuring out whether the sink supports HDMI
infoframes. Since they were added in HDMI 1.4, assume the sink supports
HDMI infoframes if it has the HDMI_Video_present bit set (introduced in
HDMI 1.4). For details, see commit f1781e9bb2dd ("drm/edid: Allow HDMI
infoframe without VIC or S3D").

The logic is not exactly the same, but since it was somewhat heuristic
to begin with, assume this is close enough.

v2:
- Simplify to only check HDMI_Video_present bit (Ville)
- Drop cea_db_raw_size() helper (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/238e15f7ab15a86f7fd1812271dcaec9bc6e1506.1674144945.git.jani.nikula@intel.com

drm/bridge: fsl-ldb: Add i.MX93 LDB support

Same to i.MX8mp LDB, i.MX93 LDB is controlled by mediamix blk-ctrl
through LDB_CTRL and LVDS_CTRL registers.  i.MX93 LDB supports only
one LVDS channel(channel 0) and it's LVDS_CTRL register bit1 is used
as LVDS_EN instead of CH1_EN.  Add i.MX93 LDB support in the existing
i.MX8mp LDB bridge driver by adding i.MX93 LDB compatible string and
device data(to reflect different register offsets and LVDS_CTRL register
bit1 definition).

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123021449.969243-3-victor.liu@nxp.com

dt-bindings: display: bridge: ldb: Add i.MX93 LDB

Same to i.MX8mp LDB, i.MX93 LDB is controlled by mediamix blk-ctrl
through 'ldb' register and 'lvds' register.  Also, the 'ldb' clock
is required.  i.MX93 LDB supports only one LVDS channel(channel 0,
a.k.a, LVDS Channel-A in the device tree binding documentation), while
i.MX8mp LDB supports at most two.  Add i.MX93 LDB device tree binding
in the existing i.MX8mp LDB device tree binding documentation.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123021449.969243-2-victor.liu@nxp.com

drm/panel: Add driver for the AUO A030JTN01 TFT LCD

Add driver for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121162419.284523-3-cbranchereau@gmail.com

dt-bindings: display/panel: Add AUO A030JTN01

Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121162419.284523-2-cbranchereau@gmail.com

drm: exynos: dsi: Properly name HSA/HBP/HFP/HSE bits

HSA/HBP/HFP/HSE mode bits in Processor Reference Manuals specify
a naming conversion as 'disable mode bit' due to its bit definition,
0 = Enable and 1 = Disable.

For HSE bit, the i.MX 8M Mini/Nano/Plus Applications Processor
Reference Manual named this bit as 'HseDisableMode' but the bit
definition is quite opposite like
0 = Disables transfer
1 = Enables transfer
which clearly states that HSE is not a disable bit.

HSE is named as per the manual even though it is not a disable
bit however the driver logic for handling HSE is based on the
MIPI_DSI_MODE_VIDEO_HSE flag itself.

Cc: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-2-jagan@amarulasolutions.com

drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags

HFP/HBP/HSA/EOT_PACKET modes in Exynos DSI host specifies
0 = Enable and 1 = Disable.

The logic for checking these mode flags was correct before
the MIPI_DSI*_NO_* mode flag conversion.

This patch is trying to fix this MIPI_DSI*_NO_* mode flags handling
Exynos DSI host and update the mode_flags in relevant panel drivers.

Fixes: 0f3b68b66a6d ("drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features")
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-1-jagan@amarulasolutions.com

MAINTAINERS: Add Sumit Semwal and Yongqin Liu as reviwers for kirin DRM driver

I no longer have access to the HiKey boards, so while I'm happy to
review code, I wanted to add Sumit and Yongqin to the reviewers list
so they would get CC'ed on future changes and would be able to have
a chance to validate and provide Tested-by: tags

Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: kernel-team@android.com
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120060956.1244187-1-jstultz@google.com

Documentation/gpu: update dGPU asic info table

Update to the latest launched dGPUs.

Link: https://www.amd.com/en/graphics/radeon-rx-graphics
Link: https://www.amd.com/en/graphics/amd-radeon-rx-laptops
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove duplicate included header files

resource.h is included more than once.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: return the PCIe gen and lanes from the INFO ioctl

For computing PCIe bandwidth in userspace and troubleshooting PCIe
bandwidth issues. Note that this intentionally fills holes and padding
in drm_amdgpu_info_device.

Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: print bo inode number instead of ptr

This allows to correlate the infos printed by
/sys/kernel/debug/dri/n/amdgpu_gem_info to the ones found
in /proc/.../fdinfo and /sys/kernel/debug/dma_buf/bufinfo.

Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: retire unused get_umc_v6_7_channel_index

Fix the following compile warning:

drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:53:24: warning: unused function 'get_umc_v6_7_channel_index' [-Wunused-function]
static inline uint32_t get_umc_v6_7_channel_index(struct amdgpu_device *adev,
                          ^
1 warning generated.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Optimize sdma ras block initialization code for sdma v4_0

Optimize sdma ras block initialization code for sdma v4_0.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix hdmi_encoded_link_bw definition

Some of the data structures are hidden when CONFIG_DRM_AMD_DC_DCN is
disabled, which leads to a link failure:

drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:234:21: error: 'union hdmi_encoded_link_bw' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
  234 |         const union hdmi_encoded_link_bw hdmi_encoded_link_bw)
      |                     ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:234:42: error: parameter 2 ('hdmi_encoded_link_bw') has incomplete type
  234 |         const union hdmi_encoded_link_bw hdmi_encoded_link_bw)
      |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:232:17: error: function declaration isn't a prototype [-Werror=strict-prototypes]
  232 | static uint32_t intersect_frl_link_bw_support(
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c: In function 'get_active_converter_info':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:1126:76: error: storage size of 'hdmi_encoded_link_bw' isn't known
 1126 |                                                 union hdmi_encoded_link_bw hdmi_encoded_link_bw;
      |                                                                            ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:1130:101: error: 'struct <anonymous>' has no member named 'MAX_ENCODED_LINK_BW_SUPPORT'
 1130 |                                                                                 hdmi_color_caps.bits.MAX_ENCODED_LINK_BW_SUPPORT);

There is probably no need to hide the data structure, and removing
the #ifdef makes it build cleanly.

Fixes: d5a43956b73b ("drm/amd/display: move dp capability related logic to link_dp_capability")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dp_retrieve_lttpr_cap() return value

gcc-13 notices a mismatch between the return type of dp_retrieve_lttpr_cap()
and the returned value:

drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c: In function 'dp_retrieve_lttpr_cap':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dp_capability.c:1465:24: error: implicit conversion from 'enum <anonymous>' to 'enum dc_status' [-Werror=enum-conversion]
 1465 |                 return false;
      |                        ^~~~~

Change the value to an actual dc_status code and remove the bogus
initialization that was apparently meant to get returned here.

Fixes: b473bd5fc333 ("drm/amd/display: refine wake up aux in retrieve link caps")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add sdma ras function on sdma v6_0_3

Add sdma ras function on sdma v6_0_3.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable S/G display on DCN 3.1.4

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable S/G display on DCN 3.1.5

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: decrease message about missing PSP runtime database to debug

Laptops with APUs from a variety of manufacturers and generations
show a warning about a missing PSP runtime database.

As it's not required for PSP to dump this database into framebuffer,
decrease messages about it missing to debug.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Decrease messaging about DP alt mode state to debug

Currently plugging in a USB-C device that issues an HPD will emit
a warning level message `DP Alt mode state on HPD: %d`.

This is needlessly noisy for most people, decrease it to debug so
that it can be turned on by dynamic debug as needed.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn4: fail to schedule IB for AV1 if VCN0 is harvested

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/soc21: don't expose AV1 if VCN0 is harvested

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn3: fail to schedule IB for AV1 if VCN0 is harvested

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nv: don't expose AV1 if VCN0 is harvested

Only VCN0 supports AV1.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add Raphael to apu-asic-info-table

Raphael launched in 2022 but was missed to add to this table.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add Mendocino to apu-asic-info-table

Mendocino launched in 2023 and uses the new naming scheme for APU
processors.

Link: https://community.amd.com/t5/corporate/announcing-new-model-numbers-for-2023-mobile-processors/ba-p/543985
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Update lines for GREEN_SARDINE and YELLOW_CARP

These products have launched, so add matching codenames.

Also AMD has announced that both of these products have new refresh
variants that launch in 2023 using the new naming scheme, so add
that information.

Link: https://community.amd.com/t5/corporate/announcing-new-model-numbers-for-2023-mobile-processors/ba-p/543985
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add MP0 version to apu-asic-info-table

MP0 version is useful to know to figure out which firmware is intended
for a platform.  Add a column for all supported APUs.

v2: squash in column fix (Mario)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/panel: vtdr6130: fix unused ret in visionox_vtdr6130_bl_update_status

Fix the following warning:
panel-visionox-vtdr6130.c:249:12: warning: 'ret' is used uninitialized [-Wuninitialized]

Fixes: 9402cde9347e ("drm/panel: vtdr6130: Use 16-bit brightness function")
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119-topic-sm8550-vtdr6130-fixup-v1-1-82c4fb008138@linaro.org

drm/edid: move EDID BPC quirk application to update_display_info()

The BPC quirks are closer to home in update_display_info().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8997e0fa3b0fd03c920e72d1dff24c0d96ff4dd0.1672826282.git.jani.nikula@intel.com

drm/edid: merge ELD handling to update_display_info()

Simplify display info update by merging ELD handling as well as clearing
of the data in update_display_info().

The connector->eld really should be moved under display_info altogether,
but that's for another time.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2e7424b998fbcdd9cea488e7d6d7cbb26c460f.1672826282.git.jani.nikula@intel.com

drm/edid: stop passing quirks around

Now that quirks are stored in display info, we can just look them up
using the connector instead of having to pass them around.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d55049dd9b2e48e63103f2dfa49bc9b25dd57f82.1672826282.git.jani.nikula@intel.com

drm/edid: store quirks in display info

Although the quirks are internal to EDID parsing, it'll be helpful to
store them in display info to avoid having to pass them around.

This will also help separate adding probed modes (which needs the
quirks) from updating display info.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/819b908f64ad2d158245917f436f24d33a65b95d.1672826282.git.jani.nikula@intel.com

accel/ivpu: Add PM support

  - Implement cold and warm firmware boot flows
  - Add hang recovery support
  - Add runtime power management support

Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-8-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add command buffer submission logic

Each of the user contexts has two command queues, one for compute engine
and one for the copy engine. Command queues are allocated and registered
in the device when the first job (command buffer) is submitted from
the user space to the VPU device. The userspace provides a list of
GEM buffer object handles to submit to the VPU, the driver resolves
buffer handles, pins physical memory if needed, increments ref count
for each buffer and stores pointers to buffer objects in
the ivpu_job objects that track jobs submitted to the device.
The VPU signals job completion with an asynchronous message that
contains the job id passed to firmware when the job was submitted.

Currently, the driver supports simple scheduling logic
where jobs submitted from user space are immediately pushed
to the VPU device command queues. In the future, it will be
extended to use hardware base scheduling and/or drm_sched.

Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-7-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Implement firmware parsing and booting

Read, parse and boot VPU firmware image.

Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-6-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add IPC driver and JSM messages

The IPC driver is used to send and receive messages to/from firmware
running on the VPU.

The only supported IPC message format is Job Submission Model (JSM)
defined in vpu_jsm_api.h header.

Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-5-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add GEM buffer object management

Adds four types of GEM-based BOs for the VPU:
  - shmem
  - internal
  - prime

All types are implemented as struct ivpu_bo, based on
struct drm_gem_object. VPU address is allocated when buffer is created
except for imported prime buffers that allocate it in BO_INFO IOCTL due
to missing file_priv arg in gem_prime_import callback.
Internal buffers are pinned on creation, the rest of buffers types
can be pinned on demand (in SUBMIT IOCTL).
Buffer VPU address, allocated pages and mappings are released when the
buffer is destroyed.
Eviction mechanism is planned for future versions.

Add two new IOCTLs: BO_CREATE, BO_INFO

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-4-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Add Intel VPU MMU support

VPU Memory Management Unit is based on ARM MMU-600.
It allows the creation of multiple virtual address spaces for
the device and map noncontinuous host memory (there is no dedicated
memory on the VPU).

Address space is implemented as a struct ivpu_mmu_context, it has an ID,
drm_mm allocator for VPU addresses and struct ivpu_mmu_pgtable that
holds actual 3-level, 4KB page table.
Context with ID 0 (global context) is created upon driver initialization
and it's mainly used for mapping memory required to execute
the firmware.
Contexts with non-zero IDs are user contexts allocated each time
the devices is open()-ed and they map command buffers and other
workload-related memory.
Workloads executing in a given contexts have access only
to the memory mapped in this context.

This patch is has two main files:
  - ivpu_mmu_context.c handles MMU page tables and memory mapping
  - ivpu_mmu.c implements a driver that programs the MMU device

Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-3-jacek.lawrynowicz@linux.intel.com

accel/ivpu: Introduce a new DRM driver for Intel VPU

VPU stands for Versatile Processing Unit and it's a CPU-integrated
inference accelerator for Computer Vision and Deep Learning
applications.

The VPU device consist of following components:
  - Buttress - provides CPU to VPU integration, interrupt, frequency and
    power management.
  - Memory Management Unit (based on ARM MMU-600) - translates VPU to
    host DMA addresses, isolates user workloads.
  - RISC based microcontroller - executes firmware that provides job
    execution API for the kernel-mode driver
  - Neural Compute Subsystem (NCS) - does the actual work, provides
    Compute and Copy engines.
  - Network on Chip (NoC) - network fabric connecting all the components

This driver supports VPU IP v2.7 integrated into Intel Meteor Lake
client CPUs (14th generation).

Module sources are at drivers/accel/ivpu and module name is
"intel_vpu.ko".

This patch includes only very besic functionality:
  - module, PCI device and IRQ initialization
  - register definitions and low level register manipulation functions
  - SET/GET_PARAM ioctls
  - power up without firmware

Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-2-jacek.lawrynowicz@linux.intel.com

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/edid: add helper for HDMI VSDB audio latency field length

Add a helper for skipping the HDMI VSDB audio latency fields.

There's a functional change for HDMI VSDB blocks that do not respect the
spec: "I_Latency_Fields_Present shall be zero if Latency_Fields_Present
is zero". We assume this to hold when skipping the latency fields, and
ignore non-zero I_Latency_Fields_Present if Latency_Fields_Present is
zero.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da4293203ef2ddeb0bf66a2bfdbc129ab609c543.1672826282.git.jani.nikula@intel.com

drm/edid: fix and clarify HDMI VSDB audio latency parsing

Add helpers for Latency_Fields_Present and I_Latency_Fields_Present
bits, and fix the parsing:

- Respect specification regarding "I_Latency_Fields_Present shall be
  zero if Latency_Fields_Present is zero".

- Don't claim latency fields are present if the data block isn't big
  enough to hold them.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80426772a2d2e17bebf6f58d99b7d0cf6260c2d6.1672826282.git.jani.nikula@intel.com

drm/edid: split CTA Y420VDB info and mode parsing

Separate the parsing of display info and modes from the CTA
Y420VDB. This is prerequisite work for overall better separation of the
two parsing steps.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bc5fe6650a6ce4249803f7192096764ea724e05.1672826282.git.jani.nikula@intel.com

drm/edid: refactor CTA Y420CMDB parsing

Now that we have pre-parsed CTA VDB VICs stored in info->vics, leverage
that to simplify CTA Y420CMDB parsing. Move updating the y420_cmdb_modes
bitmap to the display info parsing stage, instead of updating it during
add modes. This allows us to drop the intermediate y420_cmdb_map from
display info, and replace it with a local variable.

This is prerequisite work for overall better separation of the two
parsing steps (updating display info and adding modes).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7a0e5e99a83f203b6a8981d263b89b2bb7d2fe15.1672826282.git.jani.nikula@intel.com

drm/edid: rename struct drm_display_info *display to *info

Rename the local variable to info for consistency.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d35a50c714e21869afcabfafd5c5e590936b791a.1672826282.git.jani.nikula@intel.com

drm/edid: use VIC in AVI infoframe if sink lists it in CTA VDB

Apparently there are HDMI 1.4 compatible displays out there that support
VICs from specs later than CTA-861-D, i.e. VIC > 64, although HDMI 1.4
references CTA-861-D only.

We try to avoid using VICs from the later specs in the AVI infoframes to
avoid upsetting sinks that conform to earlier specs.

However, it seems reasonable to do this when the sink claims it supports
the VIC. With the pre-parsed list of VICs handy, this is now trivial.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6153
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/775124fd07a5b7892e869becc3dd8dadb328ae5f.1672826282.git.jani.nikula@intel.com

drm/edid: Use the pre-parsed VICs

Now that we have all the VICs in info->vics, use them to simplify access
based on VIC index, i.e. on the order of VICs in the EDID, and avoid
passing CTA VDB pointers around.

This also fixes the highly unlikely scenarios of a) multiple HDMI VSDBs,
and b) HDMI VSDB 3D modes using VIC indexes that span across multiple
CTA VDBs, and the combination of the two.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/30f1a97193171e70ec1c26c4b685d8930799b9a6.1672826282.git.jani.nikula@intel.com

drm/edid: parse VICs from CTA VDB early

A number of places need access to the VICs. Just parse them early for
easy access. Gracefully handle multiple CTA VDBs. It's unlikely to have
more than one, but the CTA-861 references "Video Data Block(s)", so err
on the safe side.

Start parsing them now, convert users in follow-up to have fewer moving
parts in one go.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7989b2b37837be68953c5d20afd3e93762bfd626.1672826282.git.jani.nikula@intel.com

drm/edid: fix parsing of 3D modes from HDMI VSDB

Commit 537d9ed2f6c1 ("drm/edid: convert add_cea_modes() to use cea db
iter") inadvertently moved the do_hdmi_vsdb_modes() call within the db
iteration loop, always passing NULL as the CTA VDB to
do_hdmi_vsdb_modes(), skipping a lot of stereo modes.

Move the call back outside of the loop.

This does mean only one CTA VDB and HDMI VSDB combination will be
handled, but it's an unlikely scenario to have more than one of either
block, and it was not accounted for before the regression either.

Fixes: 537d9ed2f6c1 ("drm/edid: convert add_cea_modes() to use cea db iter")
Cc: <stable@vger.kernel.org> # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf159b8816191ed595a3cb954acaf189c4528cc7.1672826282.git.jani.nikula@intel.com

drm/edid: fix AVI infoframe aspect ratio handling

We try to avoid sending VICs defined in the later specs in AVI
infoframes to sinks that conform to the earlier specs, to not upset
them, and use 0 for the VIC instead. However, we do this detection and
conversion to 0 too early, as we'll need the actual VIC to figure out
the aspect ratio.

In particular, for a mode with 64:27 aspect ratio, 0 for VIC fails the
AVI infoframe generation altogether with -EINVAL.

Separate the VIC lookup from the "filtering", and postpone the
filtering, to use the proper VIC for aspect ratio handling, and the 0
VIC for the infoframe video code as needed.

Reported-by: William Tseng <william.tseng@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6153
References: https://lore.kernel.org/r/20220920062316.43162-1-william.tseng@intel.com
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3e78cc6d01ed237f71ad0038826b08d83d75eef.1672826282.git.jani.nikula@intel.com

vc4: fix build failure in vc4_dsi_dev_probe()

The bridge->of_node field is defined inside of an #ifdef, which
results in a build failure when compile-testing the vc4_dsi driver
without CONFIG_OF:

drivers/gpu/drm/vc4/vc4_dsi.c: In function 'vc4_dsi_dev_probe':
drivers/gpu/drm/vc4/vc4_dsi.c:1822:20: error: 'struct drm_bridge' has no member named 'of_node'
 1822 |         dsi->bridge.of_node = dev->of_node;

Add another #ifdef in the place it is used in. Alternatively we
could consider dropping the #ifdef in the struct definition
and all other users.

Fixes: 78df640394cd ("drm/vc4: dsi: Convert to using a bridge instead of encoder")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117165258.1979922-1-arnd@kernel.org

drm/connector: fix a kernel-doc bad line warning

Building the kernel documentation causes this warning 7 times.
Fix it by adding a " *" line instead of a blank line.

drivers/gpu/drm/drm_connector.c:1849: warning: bad line:

Fixes: 7d63cd8526f1 ("drm/connector: Add TV standard property")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
CC: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117070224.30751-1-rdunlap@infradead.org

drm/atomic-helper: fix kernel-doc problems

Fix a kernel-doc warning and other kernel-doc formatting for
drm_atomic_helper_connect_tv_check().

drivers/gpu/drm/drm_atomic_state_helper.c:560: warning: Cannot understand  * @drm_atomic_helper_connector_tv_check: Validate an analog TV connector state
 on line 560 - I thought it was a doc line

Fixes: 5a28cefda3a9 ("drm/atomic-helper: Add an analog TV atomic_check implementation")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
CC: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117070216.30318-1-rdunlap@infradead.org

drm: bridge: ldb: Warn if LDB clock does not match requested link frequency

The LDB clock needs to be exactly 7-times the pixel clock used by the
display.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208065538.1753666-1-alexander.stein@ew.tq-group.com

dt-bindings: display: bridge: renesas,rzg2l-mipi-dsi: Document RZ/V2L support

Document RZ/V2L DSI bindings. RZ/V2L MIPI DSI is identical to one found on
the RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-mipi-dsi" will be used as a fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122195413.1882486-1-biju.das.jz@bp.renesas.com

drm/bridge: sii902x: Use dev_err_probe

This helps figuring out why the device probe is deferred.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117105903.2068235-1-alexander.stein@ew.tq-group.com

drm/bridge: sii902x: Allow reset line to be tied to a sleepy GPIO controller

Switch to gpiod_set_value_cansleep() in sii902x_reset().
This is relevant if the reset line is tied to a I2C GPIO
controller.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221228145704.939801-1-w.egorov@phytec.de

drm/panel: vtdr6130: Use 16-bit brightness function

This panel communicates brightness in big endian. This is not a quirk of
the panels themselves, but rather, a part of the MIPI standard. Use the
new mipi_dsi_dcs_set_display_brightness_large() function that properly
handles 16-bit brightness instead of bypassing the brightness functions
entirely.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-MTP
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-4-mailingradian@gmail.com

drm/panel: sofef00: Use 16-bit brightness function

These panels communicate brightness in big endian. This is not a quirk
of the panels themselves, but rather, a part of the MIPI standard. Use
the new mipi_dsi_dcs_set_display_brightness_large() function that
properly handles 16-bit brightness instead of doing special processing
of the brightness values.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-3-mailingradian@gmail.com

drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness

The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.

Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.

[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]

Fixes: 1a9d759331b8 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com

drm/amdgpu: allow multipipe policy on ASICs with one MEC

Always enable multipipe policy on ASICs with GC VERSION > 9.0.0
instead of MEC number > 1.

This will allow multipipe policy on ASICs with one MEC,
e.g., gfx11 APUs.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct MEC number for gfx11 APUs

There is only one MEC on these APUs.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix issues with driver unload

Currently, we run into a number of WARN()s when attempting to unload the
amdgpu driver (e.g. using "modprobe -r amdgpu"). These all stem from
calling drm_encoder_cleanup() too early. So, to fix this we can stop
calling drm_encoder_cleanup() from amdgpu_dm_fini() and instead have it
be called from amdgpu_dm_encoder_destroy(). Also, we don't need to free
in amdgpu_dm_encoder_destroy() since mst_encoders[] isn't explicitly
allocated by the slab allocator.

Fixes: f74367e492ba ("drm/amdgpu/display: create fake mst encoders ahead of time (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Remove redundant indirect SRAM HW model check

The HW model validation that guards the indirect SRAM checking in the
VCN code path is redundant - there's no model that's not included in the
switch, making it useless in practice [0].

So, let's remove this switch statement for good.

[0] lore.kernel.org/amd-gfx/MN0PR12MB61013D20B8A2263B22AE1BCFE2C19@MN0PR12MB6101.namprd12.prod.outlook.com

Suggested-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: James Zhu <James.Zhu@amd.com>
Cc: Lazar Lijo <Lijo.Lazar@amd.com>
Cc: Leo Liu <leo.liu@amd.com>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Adjust firmware names indentation

This is an incredibly trivial fix, just for the sake of
"aesthetical" organization of the defines. Some were space based,
most were tab based and there was a lack of "alignment", now it's
all the same and aligned.

Cc: James Zhu <James.Zhu@amd.com>
Cc: Lazar Lijo <Lijo.Lazar@amd.com>
Cc: Leo Liu <leo.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm/vmwgfx: move ttm_bo_wait into VMWGFX

Not used anymore by other drivers or TTM itself.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-9-christian.koenig@amd.com

drm/nouveau: stop using ttm_bo_wait

TTM is just wrapping core DMA functionality here, remove the mid-layer.
No functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-5-christian.koenig@amd.com

drm/bridge: lt9611: properly program the dual host mode

If the bridge is connected using both DSI ports, the driver should use
both of them all the time. Correct programming sequence to always use
dual-port mode if both dsi0 and dsi1 are connected.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-14-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: stop filtering modes via the table

The lt9611 bridge can support different modes, it makes no sense to list
them in the table. Drop the table and check the number of interfaces
using the fixed value.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-13-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: rework infoframes handling

Rework handling infoframes:
- Write full HDMI AVI infoframe instead of just fixing the VIC value
- Also send the HDMI Vendor Specific infoframe, as recommended by the
  HDMI spec.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-12-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: simplify video timings programming

Inline calculated values to simplify the calculation in
lt9611_mipi_video_setup().

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-11-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: fix sync polarity for DVI output

Attaching DVI sink to the lt9611 requires different setup. Fix the
register write to make the DVI displays sync onto the correct sync
pulse.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-10-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: attach to the next bridge

The bindings require that there is a next bridge after the lt9611. If
nothing else it can be the hdmi-connector (as used on the RB3 platform,
see sdm845-db845c.dts).

Bring in the next bridge into the drm bridges chain and attach to it.

Since lt9611 is not anymore the last bridge in the chain, this also
allows us to drop all the !DRM_BRIDGE_ATTACH_NO_CONNECTOR functionality.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-9-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: rework the mode_set function

The mode_set callback is deprectated for drm_bridges in favour of using
atomic_enable callback. Move corresponding code into the function
lt9611_bridge_atomic_enable() and turn lt9611_bridge_pre_enable() into
the proper atomic_pre_enable callback.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-8-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: pass a pointer to the of node

Pass a pointer to the OF node while registering lt9611 MIPI device.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-7-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: fix clock calculation

Instead of having several fixed values for the pcr register, calculate
it before programming. This allows the bridge to support most of the
display modes.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-6-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: fix programming of video modes

Program the upper part of the hfront_porch into the proper register.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-5-dmitry.baryshkov@linaro.org

drm/bridge: lt9611: fix polarity programming

Fix programming of hsync and vsync polarities

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-4-dmitry.baryshkov@linaro.org