watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()

In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: pic32-dmt: Remove .owner field for driver

Remove .owner field if calls are used which set it automatically.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: pic32-wdt: Remove .owner field for driver

Remove .owner field if calls are used which set it automatically.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: renesas-wdt: Add support for the r8a7796 wdt

Document support for the Watchdog Timer (WDT) Controller in the Renesas
R-Car M3-W (r8a7796) SoC.

No driver update is needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Documentation/watchdog: check return value for magic close

A recent commit added a write to the watchdog test code for doing the "magic
close", but that caused a compile-time warning:

Documentation/watchdog/src/watchdog-test.c: In function ‘main’:
Documentation/watchdog/src/watchdog-test.c:94:5: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]

This changes the code to print a runtime warning if the write fails.

Fixes: 5a2d3de19602 ("Documentation/watchdog: add support for magic close to watchdog-test")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: sbsa: Drop status function

The watchdog status function is supposed to return WDIOF_ flags,
not internal status flags. The available WDIOF_ flags are now
returned by the watchdog core, so the status function in this driver
is unnecessary.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: Implement status function in watchdog core

Up to now, the watchdog status function called a driver function,
which was supposed to return the watchdog status. All but one
driver using the watchdog core did not implement this function,
and the driver implementing it did not implement it correctly
(the function is supposed to return WDIOF_ flags). At the same time,
at least some of the status information can be provided by the watchdog
core.

Provide the available status bits directly from the watchdog driver core.
Call the driver status function if it exists to get the boot status, but
always provide WDIOF_MAGICCLOSE and WDIOF_KEEPALIVEPING internally.
This patch makes the 'status' sysfs attribute always available.
This attribute is now displayed as hex number with 0x prepended to be
easier to decode.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: tangox: Set max_hw_heartbeat_ms instead of max_timeout

Setting max_hw_heartbeat_ms lets the watchdog core provide a virtual
timeout if the timeout requested by user space is larger than the maximum
hardware timeout. Also, it helps the watchdog core to provide heartbeats
if the hardware watchdog is running while closed.

Fixes: a3e376d26ace ("watchdog: tangox: Mark running watchdog correctly")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: change watchdog_need_worker logic

If the driver indicates that the watchdog is running, the framework
should feed it until userspace opens the device, regardless of whether
the driver has set max_hw_heartbeat_ms.

This patch only affects the case where wdd->max_hw_heartbeat_ms is
zero, wdd->timeout is non-zero, the watchdog is not active and the
hardware device is running (*):

- If wdd->timeout is zero, watchdog_need_worker() returns false both
before and after this patch, and watchdog_next_keepalive() is not
called.

- If watchdog_active(wdd), the return value from watchdog_need_worker
is also the same as before (namely, hm && t > hm). Hence in that case,
watchdog_next_keepalive() is only called if hm == max_hw_heartbeat_ms
is non-zero, so the change to min_not_zero there is a no-op.

- If the watchdog is not active and the device is not running, we
return false from watchdog_need_worker just as before.

That leaves the watchdog_hw_running(wdd) && !watchdog_active(wdd) &&
wdd->timeout case. Again, it's easy to see that if
wdd->max_hw_heartbeat_ms is non-zero, we return true from
watchdog_need_worker with and without this patch, and the logic in
watchdog_next_keepalive is unchanged. Finally, if
wdd->max_hw_heartbeat_ms is 0, we used to end up in the
cancel_delayed_work branch, whereas with this patch we end up
scheduling a ping timeout_ms/2 from now.

(*) This should imply that no current kernel drivers are affected,
since the only drivers which explicitly set WDOG_HW_RUNNING are
imx2_wdt.c and dw_wdt.c, both of which also provide a non-zero value
for max_hw_heartbeat_ms. The watchdog core also sets WDOG_HW_RUNNING,
but only when the driver doesn't provide ->stop, in which case it
must, according to Documentation/watchdog/watchdog-kernel-api.txt, set
max_hw_heartbeat_ms.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: add support for MCP78S chipset in nv_tco

Add support for MCP78S chipset in nv_tco watchdog driver

Signed-off-by: Aleksey Kunitskiy <alexey.kv@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: bcm2835_wdt: remove redundant ->set_timeout callback

bcm2835_wdt_set_timeout does exactly what the watchdog framework does
in the absence of a ->set_timeout callback (see watchdog_set_timeout
in watchdog_dev.c), so remove it.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: bcm2835_wdt: constify _ops and _info structures

These are never modified, so might as well be const.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

dt-bindings: watchdog: Add Meson GXBB Watchdog bindings

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: Add Meson GXBB Watchdog Driver

Add watchdog specific driver for Amlogic Meson GXBB SoC.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: qcom: configure BARK time in addition to BITE time

For certain parts and some versions of TZ, TZ will reset the chip
when a BARK is triggered even though it was not configured here. So
by default let's configure this BARK time as well.

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: qcom: add option for standalone watchdog not in timer block

Commit 0dfd582e026a ("watchdog: qcom: use timer devicetree
binding") moved to use the watchdog as a subset timer
register block. Some devices have the watchdog completely
standalone with slightly different register offsets as
well so let's account for the differences here.

The existing "kpss-standalone" compatible string doesn't
make it entirely clear exactly what the device is so
rename to "kpss-wdt" to reflect watchdog timer
functionality. Also update ipq4019 DTS with an SoC
specific compatible.

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: qcom: update device tree bindings

Update the compatible string to align with driver and also
add SoC specific string to DTS.

CC: linux-watchdog@vger.kernel.org
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: da9063_wdt: don't trigger watchdog too fast

Triggering the watchdog faster than T_WDMIN=256ms leads to resets of the
DA9063 chip. The datasheet says that the watchdog must only be triggered
in the timeframe T_WDMIN to T_WDMAX. The T_WDMAX is configured in the
driver.

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Documentation/watchdog: add support for magic close to watchdog-test

Some drivers have the WDIOF_MAGICCLOSE set, which means that applications
need to write 'V' to the watchdog device before closing, otherwise the
driver won't stop the watchdog timer.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Documentation/watchdog: use stdout instead of stderr in watchdog-test

The watchdog-test utility outputs all messages to stderr, even those
that are not error messages.  Output to stdout instead.

Instead of flushing the output after every write, just disabled
the output buffer.

Also display a dot for every ping of the watchdog, so that the user
knows that it's working.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

x86: Fix Apollo Lake Watchdog address in PMC driver

The TCO I/O base is 40h rather than the usual 30h, and the re_reboot
bit is at ACPIBASE+8.

Signed-off-by: Yong, Jonathan <jonathan.yong@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: iTCO-wdt: handle 5th variation for Apollo Lake

The Apollo Lake Watchdog has the no_reboot flag in the 4th bit.

Signed-off-by: Yong, Jonathan <jonathan.yong@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: pic32-dmt: Fix return value check in pic32_dmt_probe()

In case of error, the function devm_kzalloc() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()

In case of error, the function devm_kzalloc() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: ziirave_wdt: Correct I2C device id to fix module autoloading.

The I2C core removes the manufacturer prefix from the compatible field
so it reports to user-space the uevent i2c:rave-wdt, but this doesn't
match with the i2c_device_id (i2c:ziirave-wdt) array so the module is not
autoloaded. Correct the I2C device id to match with the reported uevent
and fix the module autoloading functionality.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: drop redundant 'default n' option for WATCHDOG_SYSFS

The option 'default n' and its absence are equal for kbuild,
which makes explicit 'default n' redundant.

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: max77620: Add support for watchdog timer

Maxim PMIC MAX77620 is Power management IC which have multiple
sub blocks like regulators (DCDC/LDOs), GPIO, RTC, Clock, Watchdog
timer etc.

Add the driver for watchdog timer under watchdog framework.
The driver implements the watchdog callbacks to start, stop,
ping and set timeout for watchodg framework.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: f71808e_wdt: Add F81866 support

Adds watchdog enable support for Fintek F81866 Super-IO chip to
Fintek wdt driver (f71808e_wdt)

Tested and verified on iBASE MI802 Industrial PC

Datasheet references:
http://www.alldatasheet.com/datasheet-pdf/pdf/459085/FINTEK/F81866AD-I.html

Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: sirf: fix __iomem * warnings

Fix the following warnings from sparse due to casting to/from an __iomem
annotated variable:

drivers/watchdog/sirfsoc_wdt.c:48:18: warning: incorrect type in assignment (different address spaces)
drivers/watchdog/sirfsoc_wdt.c:48:18:    expected void [noderef] <asn:2>*wdt_base
drivers/watchdog/sirfsoc_wdt.c:48:18:    got void *
drivers/watchdog/sirfsoc_wdt.c:64:18: warning: incorrect type in assignment (different address spaces)
drivers/watchdog/sirfsoc_wdt.c:64:18:    expected void [noderef] <asn:2>*wdt_base
drivers/watchdog/sirfsoc_wdt.c:64:18:    got void *
drivers/watchdog/sirfsoc_wdt.c:82:54: warning: incorrect type in initializer (different address spaces)
drivers/watchdog/sirfsoc_wdt.c:82:54:    expected void [noderef] <asn:2>*wdt_base
drivers/watchdog/sirfsoc_wdt.c:82:54:    got void *
drivers/watchdog/sirfsoc_wdt.c:99:54: warning: incorrect type in initializer (different address spaces)
drivers/watchdog/sirfsoc_wdt.c:99:54:    expected void [noderef] <asn:2>*wdt_base
drivers/watchdog/sirfsoc_wdt.c:99:54:    got void *
drivers/watchdog/sirfsoc_wdt.c:153:44: warning: incorrect type in argument 2 (different address spaces)
drivers/watchdog/sirfsoc_wdt.c:153:44:    expected void *data
drivers/watchdog/sirfsoc_wdt.c:153:44:    got void [noderef] <asn:2>*[assigned] base

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: tangox: Mark running watchdog correctly

A running watchdog is marked with WDOG_HW_RUNNING, not with WDOG_ACTIVE.
WDOG_ACTIVE indicates that the watchdog device has been opened from user
space.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: Improve description of min_hw_heartbeat_ms

The description of min_hw_heartbeat_ms is misleading and needs some
improvements.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: sbsa: Set WDOG_HW_RUNNING, when watchdog is already running.

This patch uses the new flag WDOG_HW_RUNNING in driver.
According to the definition of this flag, it should be set,
if watchdog is running after booting, before it's opened.

Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: sbsa: Use max_hw_heartbeat_ms instead of max_timeout

Using max_hw_heartbeat_ms instead of max_timeout gives the flexibility to
achieve higher user "timeout". Therefore, use this new infrastructure.

Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: skip min and max timeout validity check when max_hw_heartbeat_ms is defined

When max_hw_heartbeat_ms has a none zero value, max_timeout is not used.
So it's value can be 0. In such case if a driver uses min_timeout
functionality, then check will always fail.

This patch fixes above issue.

Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: pcwd: Utilize the module_isa_driver macro

This driver does not do anything special in module init/exit. This patch
eliminates the module init/exit boilerplate code by utilizing the
module_isa_driver macro.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: Add Aspeed watchdog driver

Provides generic watchdog features as well as reboot support for the
Aspeed SoCs.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

dt-bindings: watchdog: Add Aspeed watchdog timer bindings

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: softdog: improve coding style

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: softdog: drop superfluous set_timeout callback

If we leave set_timeout empty, the core will do exactly what is
implemented here anyway.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: softdog: sort includes to avoid duplicates

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: softdog: remove forward declaration

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: softdog: consistently use softdog_ prefix

And move module_init/exit to the proper place while here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: softdog: use watchdog core to init timeout value

Error string and comment say we fall back to a default, but in reality
we bailed out. Refactor the code to use the core helper which then
matches the described behaviour. While updating the init message anyhow,
shorten it while we are here; no need for versioning there as well and
the name is already given via pr_fmt.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: softdog: remove obsolete comments

The history is obsolete, especially since we switched to watchdog
framework. The section markers also don't make sense anymore given
the small size of the driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

MAINTAINERS: add entry for HPE watchdog driver

Add a maintainer for the HPE watchdog driver

Signed-off-by: Brian Boylston <brian.boylston@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: hpwdt: remove email address from doc

Remove Tom's email address from the documentation

Signed-off-by: Brian Boylston <brian.boylston@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

watchdog: Add a device managed API for watchdog_register_device()

This helps in reducing code in .remove callbacks and sometimes
dropping .remove callbacks entirely.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Merge tag 'for-linus-20160715' of git://git.infradead.org/linux-mtd

Pull MTD fix from Brian Norris:
 "Late MTD fix for v4.7:

  One regression in the Device Tree handling for OMAP NAND handling of
  the ELM node.  TI migrated to using the property name "ti,elm-id", but
  forgot to keep compatibility with the old "elm_id" property.

  Also, might as well send out this MAINTAINERS fixup now"

* tag 'for-linus-20160715' of git://git.infradead.org/linux-mtd:
  mtd: nand: omap2: Add check for old elm binding
  MAINTAINERS: Add file patterns for mtd device tree bindings

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "A few last-minute updates for the input subsystem"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ts4800-ts - add missing of_node_put after calling of_parse_phandle
  Input: synaptics-rmi4 - use of_get_child_by_name() to fix refcount
  Revert "Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE"
  Input: xpad - validate USB endpoint count during probe
  Input: add SW_PEN_INSERTED define

Merge branch 'for-4.7-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fix from Tejun Heo:
 "The optimization for setting unbound worker affinity masks collided
  with recent scheduler changes triggering warning messages.

  This late pull request fixes the bug by removing the optimization"

* 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix setting affinity of unbound worker threads

xfs: fix type confusion in xfs_ioc_swapext

Without this check, the following XFS_I invocations would return bad
pointers when used on non-XFS inodes (perhaps pointers into preceding
allocator chunks).

This could be used by an attacker to trick xfs_swap_extents into
performing locking operations on attacker-chosen structures in kernel
memory, potentially leading to code execution in the kernel.  (I have
not investigated how likely this is to be usable for an attack in
practice.)

Signed-off-by: Jann Horn <jann@thejh.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

media: fix airspy usb probe error path

Fix a memory leak on probe error of the airspy usb device driver.

The problem is triggered when more than 64 usb devices register with
v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV.

The memory leak is caused by the probe function of the airspy driver
mishandeling errors and not freeing the corresponding control structures
when an error occours registering the device to v4l2 core.

A badusb device can emulate 64 of these devices, and then through
continual emulated connect/disconnect of the 65th device, cause the
kernel to run out of RAM and crash the kernel, thus causing a local DOS
vulnerability.

Fixes CVE-2016-5400

Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

EDAC, sb_edac: Fix Knights Landing

In commit 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver
detection") I broke Knights Landing because I failed to notice that it
called a wrapper macro "sbridge_get_all_devices_knl" instead of
"sbridge_get_all_devices" like all the other types.

Now that we include the processor type in the pci_id_table structure we
can skip the wrappers and just have the sbridge_get_all_devices() check
the type to decide whether to allow duplicate devices and controllers to
have registers spread across buses.

Fixes: 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection")
Tested-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Input: ts4800-ts - add missing of_node_put after calling of_parse_phandle

of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "20 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  m32r: fix build warning about putc
  mm: workingset: printk missing log level, use pr_info()
  mm: thp: refix false positive BUG in page_move_anon_rmap()
  mm: rmap: call page_check_address() with sync enabled to avoid racy check
  mm: thp: move pmd check inside ptl for freeze_page()
  vmlinux.lds: account for destructor sections
  gcov: add support for gcc version >= 6
  mm, meminit: ensure node is online before checking whether pages are uninitialised
  mm, meminit: always return a valid node from early_pfn_to_nid
  kasan/quarantine: fix bugs on qlist_move_cache()
  uapi: export lirc.h header
  madvise_free, thp: fix madvise_free_huge_pmd return value after splitting
  Revert "scripts/gdb: add documentation example for radix tree"
  Revert "scripts/gdb: add a Radix Tree Parser"
  scripts/gdb: Perform path expansion to lx-symbol's arguments
  scripts/gdb: add constants.py to .gitignore
  scripts/gdb: rebuild constants.py on dependancy change
  scripts/gdb: silence 'nothing to do' message
  kasan: add newline to messages
  mm, compaction: prevent VM_BUG_ON when terminating freeing scanner

Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma fixes from Doug Ledford:
 "Round three of 4.7 rc fixes:
   - two fixes for hfi1
   - two fixes for i40iw
   - one omission correction in the port table counter arrays"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  i40iw: Enable remote access rights for stag allocation
  i40iw: do not print unitialized variables in error message
  IB core: Add port_xmit_wait counter
  IB/hfi1: Fix sleep inside atomic issue in init_asic_data
  IB/hfi1: Correct issues with sc5 computation

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Four driver bugfixes for the I2C subsystem"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mux: reg: wrong condition checked for of_address_to_resource return value
  i2c: tegra: Correct error path in probe
  i2c: remove __init from i2c_register_board_info()
  i2c: qup: Fix wrong value of index variable

Merge tag 'drm-fixes-for-v4.7-rc8-vmware' of git://people.freedesktop.org/~airlied/linux

Pull drm vmware fixes from Dave Airlie:
 "These are some fixes for the vmware graphics driver, that fix some
  black screen issues on at least Ubuntu 16.04, I think VMware would
  like to get these in so stable can pick them up ASAP"

* tag 'drm-fixes-for-v4.7-rc8-vmware' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: Fix error paths when mapping framebuffer
  drm/vmwgfx: Fix corner case screen target management
  drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set
  drm/vmwgfx: Check pin count before attempting to move a buffer
  drm/ttm: Make ttm_bo_mem_compat available
  drm/vmwgfx: Add an option to change assumed FB bpp
  drm/vmwgfx: Work around mode set failure in 2D VMs
  drm/vmwgfx: Add a check to handle host message failure

Merge tag 'drm-fixes-for-v4.7-rc8' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "These are just some i915 and amdgpu fixes that shows up, the amdgpu
  ones are polaris fixes, and the i915 one is a major regression fix"

* tag 'drm-fixes-for-v4.7-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu: fix power distribution issue for Polaris10 XT
  drm/amdgpu: Add a missing register to Polaris golden setting
  drm/i915: Ignore panel type from OpRegion on SKL
  drm/i915: Update ifdeffery for mutex->owner

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Ingo Molnar:
 "Fix a CPU hotplug related corruption of the load average that got
  introduced in this merge window"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Correct off by one bug in load migration calculation

m32r: fix build warning about putc

We were getting build warning:

  arch/m32r/boot/compressed/m32r_sio.c:11:13:
     warning: conflicting types for built-in function 'putc'

Here putc is used as a static function so lets just rename it to avoid
the conflict with the builtin putc.

Link: http://lkml.kernel.org/r/1466977046-24724-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: workingset: printk missing log level, use pr_info()

Commit 612e44939c3c ("mm: workingset: eviction buckets for bigmem/lowbit
machines") added a printk without a log level.  Quieten it by using
pr_info().

Link: http://lkml.kernel.org/r/1466982072-29836-2-git-send-email-anton@ozlabs.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: refix false positive BUG in page_move_anon_rmap()

The VM_BUG_ON_PAGE in page_move_anon_rmap() is more trouble than it's
worth: the syzkaller fuzzer hit it again.  It's still wrong for some THP
cases, because linear_page_index() was never intended to apply to
addresses before the start of a vma.

That's easily fixed with a signed long cast inside linear_page_index();
and Dmitry has tested such a patch, to verify the false positive.  But
why extend linear_page_index() just for this case? when the avoidance in
page_move_anon_rmap() has already grown ugly, and there's no reason for
the check at all (nothing else there is using address or index).

Remove address arg from page_move_anon_rmap(), remove VM_BUG_ON_PAGE,
remove CONFIG_DEBUG_VM PageTransHuge adjustment.

And one more thing: should the compound_head(page) be done inside or
outside page_move_anon_rmap()? It's usually pushed down to the lowest
level nowadays (and mm/memory.c shows no other explicit use of it), so I
think it's better done in page_move_anon_rmap() than by caller.

Fixes: 0798d3c022dc ("mm: thp: avoid false positive VM_BUG_ON_PAGE in page_move_anon_rmap()")
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1607120444540.12528@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: rmap: call page_check_address() with sync enabled to avoid racy check

The previous patch addresses the race between split_huge_pmd_address()
and someone changing the pmd.  The fix is only for splitting of normal
thp (i.e.  pmd-mapped thp,) and for splitting of pte-mapped thp there
still is the similar race.

For splitting pte-mapped thp, the pte's conversion is done by
try_to_unmap_one(TTU_MIGRATION).  This function checks
page_check_address() to get the target pte, but it can return NULL under
some race, leading to VM_BUG_ON() in freeze_page().  Fortunately,
page_check_address() already has an argument to decide whether we do a
quick/racy check or not, so let's flip it when called from
freeze_page().

Link: http://lkml.kernel.org/r/1466990929-7452-2-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: move pmd check inside ptl for freeze_page()

I found a race condition triggering VM_BUG_ON() in freeze_page(), when
running a testcase with 3 processes:
  - process 1: keep writing thp,
  - process 2: keep clearing soft-dirty bits from virtual address of process 1
  - process 3: call migratepages for process 1,

The kernel message is like this:

  kernel BUG at /src/linux-dev/mm/huge_memory.c:3096!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: cfg80211 rfkill crc32c_intel ppdev serio_raw pcspkr virtio_balloon virtio_console parport_pc parport pvpanic acpi_cpufreq tpm_tis tpm i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi floppy virtio_pci virtio_ring virtio
  CPU: 0 PID: 28863 Comm: migratepages Not tainted 4.6.0-v4.6-160602-0827-+ #2
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  task: ffff880037320000 ti: ffff88007cdd0000 task.ti: ffff88007cdd0000
  RIP: 0010:[<ffffffff811f8e06>]  [<ffffffff811f8e06>] split_huge_page_to_list+0x496/0x590
  RSP: 0018:ffff88007cdd3b70  EFLAGS: 00010202
  RAX: 0000000000000001 RBX: ffff88007c7b88c0 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000700000200 RDI: ffffea0003188000
  RBP: ffff88007cdd3bb8 R08: 0000000000000001 R09: 00003ffffffff000
  R10: ffff880000000000 R11: ffffc000001fffff R12: ffffea0003188000
  R13: ffffea0003188000 R14: 0000000000000000 R15: 0400000000000080
  FS:  00007f8ec241d740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000             CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f8ec1f3ed20 CR3: 000000003707b000 CR4: 00000000000006f0
  Call Trace:
    ? list_del+0xd/0x30
    queue_pages_pte_range+0x4d1/0x590
    __walk_page_range+0x204/0x4e0
    walk_page_range+0x71/0xf0
    queue_pages_range+0x75/0x90
    ? queue_pages_hugetlb+0x190/0x190
    ? new_node_page+0xc0/0xc0
    ? change_prot_numa+0x40/0x40
    migrate_to_node+0x71/0xd0
    do_migrate_pages+0x1c3/0x210
    SyS_migrate_pages+0x261/0x290
    entry_SYSCALL_64_fastpath+0x1a/0xa4
  Code: e8 b0 87 fb ff 0f 0b 48 c7 c6 30 32 9f 81 e8 a2 87 fb ff 0f 0b 48 c7 c6 b8 46 9f 81 e8 94 87 fb ff 0f 0b 85 c0 0f 84 3e fd ff ff <0f> 0b 85 c0 0f 85 a6 00 00 00 48 8b 75 c0 4c 89 f7 41 be f0 ff
  RIP   split_huge_page_to_list+0x496/0x590

I'm not sure of the full scenario of the reproduction, but my debug
showed that split_huge_pmd_address(freeze=true) returned without running
main code of pmd splitting because pmd_present(*pmd) in precheck somehow
returned 0.  If this happens, the subsequent try_to_unmap() fails and
returns non-zero (because page_mapcount() still > 0), and finally
VM_BUG_ON() fires.  This patch tries to fix it by prechecking pmd state
inside ptl.

Link: http://lkml.kernel.org/r/1466990929-7452-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmlinux.lds: account for destructor sections

If CONFIG_KASAN is enabled and gcc is configured with
--disable-initfini-array and/or gold linker is used, gcc emits
.ctors/.dtors and .text.startup/.text.exit sections instead of
.init_array/.fini_array.  .dtors section is not explicitly accounted in
the linker script and messes vvar/percpu layout.

We want:
  ffffffff822bfd80 D _edata
  ffffffff822c0000 D __vvar_beginning_hack
  ffffffff822c0000 A __vvar_page
  ffffffff822c0080 0000000000000098 D vsyscall_gtod_data
  ffffffff822c1000 A __init_begin
  ffffffff822c1000 D init_per_cpu__irq_stack_union
  ffffffff822c1000 A __per_cpu_load
  ffffffff822d3000 D init_per_cpu__gdt_page

We got:
  ffffffff8279a600 D _edata
  ffffffff8279b000 A __vvar_page
  ffffffff8279c000 A __init_begin
  ffffffff8279c000 D init_per_cpu__irq_stack_union
  ffffffff8279c000 A __per_cpu_load
  ffffffff8279e000 D __vvar_beginning_hack
  ffffffff8279e080 0000000000000098 D vsyscall_gtod_data
  ffffffff827ae000 D init_per_cpu__gdt_page

This happens because __vvar_page and .vvar get different addresses in
arch/x86/kernel/vmlinux.lds.S:

. = ALIGN(PAGE_SIZE);
__vvar_page = .;

.vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
/* work around gold bug 13023 */
__vvar_beginning_hack = .;

Discard .dtors/.fini_array/.text.exit, since we don't call dtors.
Merge .text.startup into init text.

Link: http://lkml.kernel.org/r/1467386363-120030-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcov: add support for gcc version >= 6

Link: http://lkml.kernel.org/r/20160701130914.GA23225@styxhp
Signed-off-by: Florian Meier <Florian.Meier@informatik.uni-erlangen.de>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, meminit: ensure node is online before checking whether pages are uninitialised

early_page_uninitialised looks up an arbitrary PFN.  While a machine
without node 0 will boot with "mm, page_alloc: Always return a valid
node from early_pfn_to_nid", it works because it assumes that nodes are
always in PFN order.  This is not guaranteed so this patch adds
robustness by always checking if the node being checked is online.

Link: http://lkml.kernel.org/r/1468008031-3848-4-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, meminit: always return a valid node from early_pfn_to_nid

early_pfn_to_nid can return node 0 if a PFN is invalid on machines that
has no node 0.  A machine with only node 1 was observed to crash with
the following message:

   BUG: unable to handle kernel paging request at 000000000002a3c8
   PGD 0
   Modules linked in:
   Hardware name: Supermicro H8DSP-8/H8DSP-8, BIOS 080011  06/30/2006
   task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000
   RIP: reserve_bootmem_region+0x6a/0xef
   CR2: 000000000002a3c8 CR3: 0000000001c06000 CR4: 00000000000006b0
   Call Trace:
      free_all_bootmem+0x4b/0x12a
      mem_init+0x70/0xa3
      start_kernel+0x25b/0x49b

The problem is that early_page_uninitialised uses the early_pfn_to_nid
helper which returns node 0 for invalid PFNs.  No caller of
early_pfn_to_nid cares except early_page_uninitialised.  This patch has
early_pfn_to_nid always return a valid node.

Link: http://lkml.kernel.org/r/1468008031-3848-3-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan/quarantine: fix bugs on qlist_move_cache()

There are two bugs on qlist_move_cache().  One is that qlist's tail
isn't set properly.  curr->next can be NULL since it is singly linked
list and NULL value on tail is invalid if there is one item on qlist.
Another one is that if cache is matched, qlist_put() is called and it
will set curr->next to NULL.  It would cause to stop the loop
prematurely.

These problems come from complicated implementation so I'd like to
re-implement it completely.  Implementation in this patch is really
simple.  Iterate all qlist_nodes and put them to appropriate list.

Unfortunately, I got this bug sometime ago and lose oops message.  But,
the bug looks trivial and no need to attach oops.

Fixes: 55834c59098d ("mm: kasan: initial memory quarantine implementation")
Link: http://lkml.kernel.org/r/1467766348-22419-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Kuthonuzo Luruo <poll.stdin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uapi: export lirc.h header

This header contains the userspace API for lirc.

This is a fixup for commit b7be755733dc ("[media] bz#75751: Move
internal header file lirc.h to uapi/").  It moved the header to the
right place, but it forgot to add it at Kbuild.  So, despite being at
uapi, it is not copied to the right place.

Fixes: b7be755733dc44c72 ("[media] bz#75751: Move internal header file lirc.h to uapi/")
Link: http://lkml.kernel.org/r/320c765d32bfc82c582e336d52ffe1026c73c644.1468439021.git.mchehab@s-opensource.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Alec Leamas <leamas.alec@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

madvise_free, thp: fix madvise_free_huge_pmd return value after splitting

madvise_free_huge_pmd should return 0 if the fallback PTE operations are
required.  In madvise_free_huge_pmd, if part pages of THP are discarded,
the THP will be split and fallback PTE operations should be used if
splitting succeeds.  But the original code will make fallback PTE
operations skipped, after splitting succeeds.  Fix that via make
madvise_free_huge_pmd return 0 after splitting successfully, so that the
fallback PTE operations will be done.

Link: http://lkml.kernel.org/r/1467135452-16688-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "scripts/gdb: add documentation example for radix tree"

This reverts commit 9b5580359a84 ("scripts/gdb: add documentation
example for radix tree")

The python implementation of radix tree was merged at the same time as a
refactoring of the radix tree implementation and doesn't work.  The
feature is being reverted, thus we revert the documentation as well.

Link: http://lkml.kernel.org/r/1467127337-11135-7-git-send-email-kieran@bingham.xyz
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "scripts/gdb: add a Radix Tree Parser"

This reverts commit e127a73d41ac ("scripts/gdb: add a Radix Tree
Parser")

The python implementation of radix-tree was merged at the same time as
the radix-tree system was heavily reworked from commit e9256efcc8e3
("radix-tree: introduce radix_tree_empty") to 3bcadd6fa6c4 ("radix-tree:
free up the bottom bit of exceptional entries for reuse") and no longer
functions, but also prevents other gdb scripts from loading.

This functionality has not yet hit a release, so simply remove it for
now

Link: http://lkml.kernel.org/r/1467127337-11135-6-git-send-email-kieran@bingham.xyz
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/gdb: Perform path expansion to lx-symbol's arguments

Python doesn't do automatic expansion of paths.  In case one passes path
of the from ~/foo/bar the gdb scripts won't automatically expand that
and as a result the symbols files won't be loaded.

Fix this by explicitly expanding all paths which begin with "~"

Link: http://lkml.kernel.org/r/1467127337-11135-5-git-send-email-kieran@bingham.xyz
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/gdb: add constants.py to .gitignore

Since scripts/gdb/linux/constants.py is autogenerated, this should have
been added to .gitignore when it was introduced.

Fixes: f197d75fcad1 ("scripts/gdb: provide linux constants")
Link: http://lkml.kernel.org/r/1467127337-11135-4-git-send-email-kieran@bingham.xyz
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/gdb: rebuild constants.py on dependancy change

The autogenerated constants.py file was only being built on the initial
call, and if the constants.py.in file changed.  As we are utilising the
CPP hooks, we can successfully use the call if_changed_dep rules to
determine when to rebuild the file based on it's inclusions.

Link: http://lkml.kernel.org/r/1467127337-11135-3-git-send-email-kieran@bingham.xyz
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/gdb: silence 'nothing to do' message

The constants.py generation, involves a rule to link into the main
makefile.  This rule has no command and generates a spurious warning
message in the build logs when CONFIG_SCRIPTS_GDB is enabled.

Fix simply by giving a no-op action

Link: http://lkml.kernel.org/r/1467127337-11135-2-git-send-email-kieran@bingham.xyz
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: add newline to messages

Currently GPF messages with KASAN look as follows:

  kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN

Add newlines.

Link: http://lkml.kernel.org/r/1467294357-98002-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, compaction: prevent VM_BUG_ON when terminating freeing scanner

It's possible to isolate some freepages in a pageblock and then fail
split_free_page() due to the low watermark check.  In this case, we hit
VM_BUG_ON() because the freeing scanner terminated early without a
contended lock or enough freepages.

This should never have been a VM_BUG_ON() since it's not a fatal
condition.  It should have been a VM_WARN_ON() at best, or even handled
gracefully.

Regardless, we need to terminate anytime the full pageblock scan was not
done.  The logic belongs in isolate_freepages_block(), so handle its
state gracefully by terminating the pageblock loop and making a note to
restart at the same pageblock next time since it was not possible to
complete the scan this time.

[rientjes@google.com: don't rescan pages in a pageblock]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1607111244150.83138@chino.kir.corp.google.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606291436300.145590@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Minchan Kim <minchan@kernel.org>
Tested-by: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux into drm-fixes

A bunch of vmwgfx fixes that fix a black screen issue on latest distros/hw combos.

* 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux:
  drm/vmwgfx: Fix error paths when mapping framebuffer
  drm/vmwgfx: Fix corner case screen target management
  drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set
  drm/vmwgfx: Check pin count before attempting to move a buffer
  drm/ttm: Make ttm_bo_mem_compat available
  drm/vmwgfx: Add an option to change assumed FB bpp
  drm/vmwgfx: Work around mode set failure in 2D VMs
  drm/vmwgfx: Add a check to handle host message failure

Merge tag 'drm-intel-fixes-2016-07-14' of git://anongit.freedesktop.org/drm-intel into drm-fixes

I've also realized that a pile of hang fixes for kbl landed in next, and
no one thought of backporting it to 4.7 - kbl has lost prelim_hw_support
tagging in 4.7-rc1 already. Mika is prepping a topic branch for those,
will send you a separate pull request since it's quite a bit (but should
be all well restricted to kbl code, so similar to polaris in amdgpu).

* tag 'drm-intel-fixes-2016-07-14' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Ignore panel type from OpRegion on SKL
  drm/i915: Update ifdeffery for mutex->owner

Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Two more polaris fixes.
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: fix power distribution issue for Polaris10 XT
  drm/amdgpu: Add a missing register to Polaris golden setting

drm/amdgpu: fix power distribution issue for Polaris10 XT

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add a missing register to Polaris golden setting

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Input: synaptics-rmi4 - use of_get_child_by_name() to fix refcount

Calling of_find_node_by_name() assumes that the caller has incremented
the refcount of the of_node being passed in. Currently, the caller is
not incrementing the refcount of the of_node which results in the node
being prematurely freed when of_find_node_by_name() calls of_node_put()
on it. Instead use of_get_child_by_name() which does not call put on the
of_node.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Revert "Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE"

This reverts commit 5f7e5445a2de848c66d2d80ba5479197e8287c33 because
removal of input_mt_report_slot_state() means we no longer generate
tracking IDs for the reported contacts.

Cc: stable@vger.kernel.org
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <pinglinux@gmail.com>

mtd: nand: omap2: Add check for old elm binding

commit c9711ec5250b ("mtd: nand: omap: Clean up device tree support")
removes the check for the old elm phandle binding.
Add it again to keep backward compatibility.

Fixes: commit c9711ec5250b ("mtd: nand: omap: Clean up device tree support")
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

drm/i915: Ignore panel type from OpRegion on SKL

Dell XPS 13 9350 apparently doesn't like it when we use the panel type
from OpRegion. The OpRegion panel type (0) tells us to use use low
vswing for eDP, whereas the VBT panel type (2) tells us to use normal
vswing. The problem is that low vswing results in some display flickers.
Since no one seems to know how this stuff is supposed to be handled,
let's just ignore the OpRegion panel type on SKL for now.

v2: Print the panel type correctly in the debug output

Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: drm-intel-fixes@lists.freedesktop.org
References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html
Fixes: a05628195a0d ("drm/i915: Get panel_type from OpRegion panel details")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468324837-29237-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit bb10d4ec3be4b069bfb61c60ca4f708f58f440f1)
[danvet: Fix up cherry-pick conflict with an s/dev_priv/dev/.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Update ifdeffery for mutex->owner

In commit 7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER when
appropriate") the owner field in the mutex was updated from being
dependent upon CONFIG_SMP to using optimistic spin. Update our peek
function to suite.

Fixes:7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER...")
Reported-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1468244777-4888-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
(cherry picked from commit 4f074a5393431a7d2cc0de7fcfe2f61d24854628)
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge branches 'perf-urgent-for-linus' and 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf and timer fixes from Ingo Molnar:
 "A fix for a posix CPU timers bug, and a perf printk message fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix bogus kernel printk, again

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix_cpu_timer: Exit early when process has been reaped

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "This contains three commits to fix memory corruption bugs with certain
  Apple AirPort cards, plus a fix for a X86_BUG() ID definitions collision
  bug in asm/cpufeatures.h"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/quirks: Add early quirk to reset Apple AirPort card
  x86/quirks: Reintroduce scanning of secondary buses
  x86/quirks: Apply nvidia_bugs quirk only on root bus
  x86/cpu: Fix duplicated X86_BUG(9) macro

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull core fixes from Ingo Molnar:
 "Fix an objtool false positive plus an UP kernel memory corruption bug
  on certain configs"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Keep enough storage space if SMP=n to avoid array out of bounds scribble
  objtool: Fix STACK_FRAME_NON_STANDARD macro checking for function symbols

sched/core: Correct off by one bug in load migration calculation

The move of calc_load_migrate() from CPU_DEAD to CPU_DYING did not take into
account that the function is now called from a thread running on the outgoing
CPU. As a result a cpu unplug leakes a load of 1 into the global load
accounting mechanism.

Fix it by adjusting for the currently running thread which calls
calc_load_migrate().

Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Cc: rt@linutronix.de
Cc: shreyas@linux.vnet.ibm.com
Fixes: e9cd8fa4fcfd: ("sched/migration: Move calc_load_migrate() into CPU_DYING")
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607121744350.4083@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'media/v4.7-2' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "Two regression fixes:

  - a regression when handling VIDIOC_CROPCAP at the media core;

  - a regression at adv7604 that was ignoring pad number in subdev ops"

* tag 'media/v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] adv7604: Don't ignore pad number in subdev DV timings pad operations
  [media] v4l2-ioctl: fix stupid mistake in cropcap condition

cpu/hotplug: Keep enough storage space if SMP=n to avoid array out of bounds scribble

Xiaolong Ye reported lock debug warnings triggered by the following commit:

  8de4a0066106 ("perf/x86: Convert the core to the hotplug state machine")

The bug is the following: the cpuhp_bp_states[] array is cut short when
CONFIG_SMP=n, but the dynamically registered callbacks are stored nevertheless
and happily scribble outside of the array bounds...

We need to store them in case that the state is unregistered so we can invoke
the teardown function. That's independent of CONFIG_SMP. Make sure the array
is large enough.

Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: lkp@01.org
Cc: stable@vger.kernel.org
Cc: tipbuild@zytor.com
Fixes: cff7d378d3fd "cpu/hotplug: Convert to a state machine for the control processor"
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607122144560.4083@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'acpi-urgent-4.7' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "One ACPI EC driver regression fix (code ordering) and three reverts of
  ACPICA commits, one that introduced a problem and two unsuccessful
  attempted fixes on top of it.

  Specifics:

   - Fix a recent regression in the ACPI EC driver introduced by a fix
     of another problem that uncovered a latent code ordering issue in
     the driver (Lv Zheng).

   - Revert a recent ACPICA commit that attempted to address a lock
     ordering issue introduced by a previous fix, but caused Dell
     Precision 5510 to fail to boot, revert that previous fix too and
     finally revert the commit that caused the original problem (a
     deadlock in the ACPICA code) to happen (Rafael Wysocki)"

* tag 'acpi-urgent-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis"
  Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading"
  Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering"
  ACPI / EC: Fix code ordering issue in ec_remove_handlers()

Merge branches 'acpica-fixes' and 'acpi-ec-fixes'

* acpica-fixes:
  Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis"
  Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading"
  Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering"

* acpi-ec-fixes:
  ACPI / EC: Fix code ordering issue in ec_remove_handlers()

Merge tag 'qcom-smd-list-voltage' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "Fix qcom-smd list voltage issues for msm8974

  This commit looks like a cleanup but in fact by causing the core to go
  down some simplified code paths for noop regulators it avoids a boot
  time crash for msm8974 platforms which was introduced in v4.7.  It has
  been in -next for a while, the issues in mainline for these platforms
  weren't flagged up to me until yesterday (I think it took some time to
  figure out what was going wrong)"

* tag 'qcom-smd-list-voltage' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom_smd: Remove list_voltage callback for rpm_smps_ldo_ops_fixed

i40iw: Enable remote access rights for stag allocation

Fix to enable remote access rights when allocating stag.

Fixes: b7aee855d3b9 ("RDMA/i40iw: Add base memory management extensions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>